/*************************************************************************
*
* $RCSfile: page.cxx,v $
*
* $Revision: 1.27 $
*
* last change: $Author: kz $ $Date: 2005-03-01 15:12:44 $
*
* The Contents of this file are made available subject to the terms of
* either of the following licenses
*
* - GNU Lesser General Public License Version 2.1
* - Sun Industry Standards Source License Version 1.1
*
* Sun Microsystems Inc., October, 2000
*
* GNU Lesser General Public License Version 2.1
* =============================================
* Copyright 2000 by Sun Microsystems, Inc.
* 901 San Antonio Road, Palo Alto, CA 94303, USA
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2.1, as published by the Free Software Foundation.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*
* Sun Industry Standards Source License Version 1.1
* =================================================
* The contents of this file are subject to the Sun Industry Standards
* Source License Version 1.1 (the "License"); You may not use this file
* except in compliance with the License. You may obtain a copy of the
* License at http://www.openoffice.org/license.html.
*
* Software provided under this License is provided on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
* WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
* MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
* See the License for the specific provisions governing your rights and
* obligations concerning the Software.
*
* The Initial Developer of the Original Code is: Sun Microsystems, Inc.
*
* Copyright: 2000 by Sun Microsystems, Inc.
*
* All Rights Reserved.
*
* Contributor(s): _______________________________________
*
*
************************************************************************/
#ifdef SVX_DLLIMPLEMENTATION
#undef SVX_DLLIMPLEMENTATION
#endif
// include ---------------------------------------------------------------
#define ITEMID_BRUSH 0
#define ITEMID_BOX 0
#define ITEMID_BOXINFO 0
#define ITEMID_SHADOW 0
#define ITEMID_PAPERBIN 0
#define ITEMID_LRSPACE 0
#define ITEMID_ULSPACE 0
#define ITEMID_SIZE 0
#define ITEMID_FRAMEDIR 0
#ifndef _SFXAPP_HXX //autogen
#include <sfx2/app.hxx>
#endif
#ifndef _SFX_OBJSH_HXX
#include <sfx2/objsh.hxx>
#endif
#ifndef _RESARY_HXX //autogen
#include <tools/resary.hxx>
#endif
#ifndef _GRAPH_HXX //autogen
#include <vcl/graph.hxx>
#endif
#ifndef _SFXVIEWSH_HXX //autogen
#include <sfx2/viewsh.hxx>
#endif
#ifndef _SFXITEMITER_HXX //autogen
#include <svtools/itemiter.hxx>
#endif
#ifndef _SVTOOLS_LANGUAGEOPTIONS_HXX
#include <svtools/languageoptions.hxx>
#endif
#ifndef _SV_MSGBOX_HXX //autogen
#include <vcl/msgbox.hxx>
#endif
#ifndef _UTL_CONFIGITEM_HXX_
#include <unotools/configitem.hxx>
#endif
#ifndef _SVX_HTMLMODE_HXX
#include "htmlmode.hxx"
#endif
#define _SVX_PAGE_CXX
#include "dialogs.hrc"
#include "page.hrc"
#include "helpid.hrc"
#define ITEMID_PAGE 0
#define ITEMID_SETITEM 0
#define ITEMID_PTR 0
#include "page.hxx"
#include "pageitem.hxx"
#include "brshitem.hxx"
#include "boxitem.hxx"
#include "shaditem.hxx"
#include "pbinitem.hxx"
#include "lrspitem.hxx"
#include "ulspitem.hxx"
#include "sizeitem.hxx"
#include "frmdiritem.hxx"
//CHINA001 #include "bbdlg.hxx"
#include "dlgutil.hxx"
#include "dialmgr.hxx"
#include "paperinf.hxx"
#include "dialmgr.hxx"
#ifndef _SFXMODULE_HXX
#include <sfx2/module.hxx>
#endif
#ifndef _SFXSTRITEM_HXX //autogen
#include <svtools/stritem.hxx>
#endif
#include "svxids.hrc" //CHINA001
#ifndef _SFXSLSTITM_HXX //CHINA001
#include <svtools/slstitm.hxx> //CHINA001
#endif //CHINA001
#ifndef _AEITEM_HXX //CHINA001
#include <svtools/aeitem.hxx> //CHINA001
#endif //CHINA001
#include <sfx2/request.hxx> //CHINA001
// configuration helper =======================================================
/** Helper to get a configuration setting.
@descr This is a HACK to get a configuration item directly. Normally the
OfaHtmlOptions class from 'offmgr' project would do the job, but we cannot
use it here. On the other hand, the OfaHtmlOptions cannot be moved to
'svtools', because it uses 'svx' itself...
The correct way would be to move OfaHtmlOptions to 'svtools' anyway, and to
remove the dependency from 'svx' (a call to the static function
SvxTextEncodingBox::GetBestMimeEncoding(), which contains low level
operations that can be moved to lower projects, i.e. 'rtl'). Then this
class can be removed, and the OfaHtmlOptions can be used instead. */
class SvxHtmlExportModeConfigItem_Impl : public utl::ConfigItem
{
public:
explicit SvxHtmlExportModeConfigItem_Impl();
/** Returns the HTML export mode, as read from the configuration. */
inline sal_Int32 GetExportMode() const { return mnExpMode; }
/** Returns true, if the current HTML export mode is set to HTML 3.2. */
inline bool IsExportModeHTML32() const { return mnExpMode == 0; } // 0 == HTML_CFG_HTML32, see offmgr/htmlcfg.hxx
private:
sal_Int32 mnExpMode;
};
SvxHtmlExportModeConfigItem_Impl::SvxHtmlExportModeConfigItem_Impl() :
utl::ConfigItem( rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "Office.Common/Filter/HTML/Export" ) ) ),
mnExpMode( 3 ) // default to 3 == HTML_CFG_NS40, see offmgr/htmlcfg.hxx
{
using com::sun::star::uno::Sequence;
using com::sun::star::uno::Any;
Sequence< rtl::OUString > aPropNames( 1 );
aPropNames[ 0 ] = rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "Browser" ) );
Sequence< Any > aPropValues( GetProperties( aPropNames ) );
if( aPropValues.getLength() == 1 )
aPropValues[ 0 ] >>= mnExpMode;
}
// static ----------------------------------------------------------------
static const long MINBODY = 284; // 0,5cm in twips aufgerundet
//static const long PRINT_OFFSET = 17; // 0,03cm in twips abgerundet
static const long PRINT_OFFSET = 0; // why was this ever set to 17 ? it led to wrong right and bottom margins.
static USHORT pRanges[] =
{
SID_ATTR_BORDER_OUTER,
SID_ATTR_BORDER_SHADOW,
SID_ATTR_LRSPACE,
SID_ATTR_PAGE_SHARED,
SID_SWREGISTER_COLLECTION,
SID_SWREGISTER_MODE,
0
};
// ------- Mapping Seitenlayout ------------------------------------------
USHORT aArr[] =
{
SVX_PAGE_ALL,
SVX_PAGE_MIRROR,
SVX_PAGE_RIGHT,
SVX_PAGE_LEFT
};
// -----------------------------------------------------------------------
USHORT PageUsageToPos_Impl( USHORT nUsage )
{
const USHORT nCount = sizeof(aArr) / sizeof(USHORT);
for ( USHORT i = 0; i < nCount; ++i )
if ( aArr[i] == ( nUsage & 0x000f ) )
return i;
return SVX_PAGE_ALL;
}
// -----------------------------------------------------------------------
USHORT PosToPageUsage_Impl( USHORT nPos )
{
const USHORT nCount = sizeof(aArr) / sizeof(USHORT);
if ( nPos >= nCount )
return 0;
return aArr[nPos];
}
// -----------------------------------------------------------------------
Size GetMinBorderSpace_Impl( const SvxShadowItem& rShadow, const SvxBoxItem& rBox )
{
Size aSz;
aSz.Height() = rShadow.CalcShadowSpace( SHADOW_BOTTOM ) + rBox.CalcLineSpace( BOX_LINE_BOTTOM );
aSz.Height() += rShadow.CalcShadowSpace( SHADOW_TOP ) + rBox.CalcLineSpace( BOX_LINE_TOP );
aSz.Width() = rShadow.CalcShadowSpace( SHADOW_LEFT ) + rBox.CalcLineSpace( BOX_LINE_LEFT );
aSz.Width() += rShadow.CalcShadowSpace( SHADOW_RIGHT ) + rBox.CalcLineSpace( BOX_LINE_RIGHT );
return aSz;
}
// -----------------------------------------------------------------------
long ConvertLong_Impl( const long nIn, SfxMapUnit eUnit )
{
return OutputDevice::LogicToLogic( nIn, (MapUnit)eUnit, MAP_TWIP );
}
BOOL IsEqualSize_Impl( const SvxSizeItem* pSize, const Size& rSize )
{
if ( pSize )
{
Size aSize = pSize->GetSize();
long nDiffW = Abs( rSize.Width () - aSize.Width () );
long nDiffH = Abs( rSize.Height() - aSize.Height() );
return ( nDiffW < 10 && nDiffH < 10 );
}
else
return FALSE;
}
// -----------------------------------------------------------------------
#define MARGIN_LEFT ( (MarginPosition)0x0001 )
#define MARGIN_RIGHT ( (MarginPosition)0x0002 )
#define MARGIN_TOP ( (MarginPosition)0x0004 )
#define MARGIN_BOTTOM ( (MarginPosition)0x0008 )
struct SvxPage_Impl
{
MarginPosition m_nPos;
Printer* mpDefPrinter;
bool mbDelPrinter;
SvxPage_Impl() :
m_nPos( 0 ),
mpDefPrinter( 0 ),
mbDelPrinter( false ) {}
~SvxPage_Impl() { if ( mbDelPrinter ) delete mpDefPrinter; }
};
// class SvxPageDescPage --------------------------------------------------
// gibt den Bereich der Which-Werte zur"uck
USHORT* SvxPageDescPage::GetRanges()
{
return pRanges;
}
// -----------------------------------------------------------------------
SfxTabPage* SvxPageDescPage::Create( Window* pParent, const SfxItemSet& rSet )
{
return new SvxPageDescPage( pParent, rSet );
}
// -----------------------------------------------------------------------
SvxPageDescPage::SvxPageDescPage( Window* pParent, const SfxItemSet& rAttr ) :
SfxTabPage( pParent, SVX_RES( RID_SVXPAGE_PAGE ), rAttr ),
aLeftMarginLbl ( this, ResId( FT_LEFT_MARGIN ) ),
aLeftMarginEdit ( this, ResId( ED_LEFT_MARGIN ) ),
aRightMarginLbl ( this, ResId( FT_RIGHT_MARGIN ) ),
aRightMarginEdit ( this, ResId( ED_RIGHT_MARGIN ) ),
aTopMarginLbl ( this, ResId( FT_TOP_MARGIN ) ),
aTopMarginEdit ( this, ResId( ED_TOP_MARGIN ) ),
aBottomMarginLbl ( this, ResId( FT_BOTTOM_MARGIN ) ),
aBottomMarginEdit ( this, ResId( ED_BOTTOM_MARGIN ) ),
aMarginFl ( this, ResId( FL_MARGIN ) ),
aLayoutBox ( this, ResId( LB_LAYOUT ) ),
aPageText ( this, ResId( FT_PAGELAYOUT ) ),
aNumberFormatBox ( this, ResId( LB_NUMBER_FORMAT ) ),
aNumberFormatText ( this, ResId( FT_NUMBER_FORMAT ) ),
aLayoutFL ( this, ResId( FL_LAYOUT ) ),
aBspWin ( this, ResId( WN_BSP ) ),
aPaperFormatText ( this, ResId( FT_PAPER_FORMAT ) ),
aPaperSizeBox ( this, ResId( LB_PAPER_SIZE ) ),
aOrientationFT ( this, ResId( FT_ORIENTATION ) ),
aPortraitBtn ( this, ResId( RB_PORTRAIT ) ),
aLandscapeBtn ( this, ResId( RB_LANDSCAPE ) ),
aPaperWidthText ( this, ResId( FT_PAPER_WIDTH ) ),
aPaperWidthEdit ( this, ResId( ED_PAPER_WIDTH ) ),
aPaperHeightText ( this, ResId( FT_PAPER_HEIGHT ) ),
aPaperHeightEdit ( this, ResId( ED_PAPER_HEIGHT ) ),
aPaperTrayLbl ( this, ResId( FT_PAPER_TRAY ) ),
aPaperTrayBox ( this, ResId( LB_PAPER_TRAY ) ),
aPaperSizeFl ( this, ResId( FL_PAPER_SIZE ) ),
aBottomSeparatorFl ( this, ResId( FL_BOTTOM_SEP ) ),
aTblAlignFT ( this, ResId( FT_TBL_ALIGN ) ),
aHorzBox ( this, ResId( CB_HORZ ) ),
aVertBox ( this, ResId( CB_VERT ) ),
aAdaptBox ( this, ResId( CB_ADAPT ) ),
aRegisterCB ( this, ResId( CB_REGISTER ) ),
aRegisterFT ( this, ResId( FT_REGISTER ) ),
aRegisterLB ( this, ResId( LB_REGISTER ) ),
aTextFlowLbl ( this, ResId( FT_TEXT_FLOW ) ),
aTextFlowBox ( this, ResId( LB_TEXT_FLOW ) ),
aInsideText ( ResId( STR_INSIDE ) ),
aOutsideText ( ResId( STR_OUTSIDE ) ),
aPrintRangeQueryText( ResId( STR_QUERY_PRINTRANGE ) ),
bLandscape ( FALSE ),
eMode ( SVX_PAGE_MODE_STANDARD ),
ePaperStart ( SVX_PAPER_A3 ),
ePaperEnd ( SVX_PAPER_DL ),
pImpl ( new SvxPage_Impl )
{
bBorderModified = FALSE;
FreeResource();
// diese Page braucht ExchangeSupport
SetExchangeSupport();
SvtLanguageOptions aLangOptions;
sal_Bool bCJK = aLangOptions.IsAsianTypographyEnabled();
sal_Bool bCTL = aLangOptions.IsCTLFontEnabled();
sal_Bool bWeb = sal_False;
const SfxPoolItem* pItem;
SfxObjectShell* pShell;
if(SFX_ITEM_SET == rAttr.GetItemState(SID_HTML_MODE, FALSE, &pItem) ||
( 0 != (pShell = SfxObjectShell::Current()) &&
0 != (pItem = pShell->GetItem(SID_HTML_MODE))))
bWeb = 0 != (((const SfxUInt16Item*)pItem)->GetValue() & HTMLMODE_ON);
// #109989# get the HTML export setting from configuration.
// !! This is a hack, see comments in SvxHtmlExportModeConfigItem_Impl class above.
bool bHTML32 = SvxHtmlExportModeConfigItem_Impl().IsExportModeHTML32();
// fill text flow listbox with valid entries
aTextFlowBox.InsertEntryValue( SVX_RESSTR( RID_SVXSTR_PAGEDIR_LTR_HORI ), FRMDIR_HORI_LEFT_TOP );
if( bCTL )
aTextFlowBox.InsertEntryValue( SVX_RESSTR( RID_SVXSTR_PAGEDIR_RTL_HORI ), FRMDIR_HORI_RIGHT_TOP );
// #109989# do not show vertical directions in Writer/Web
if( !bWeb )
{
if( bCJK )
aTextFlowBox.InsertEntryValue( SVX_RESSTR( RID_SVXSTR_PAGEDIR_RTL_VERT ), FRMDIR_VERT_TOP_RIGHT );
// if( ... )
// aTextFlowBox.InsertEntryValue( SVX_RESSTR( RID_SVXSTR_PAGEDIR_LTR_VERT ), FRMDIR_VERT_TOP_LEFT );
}
// #109989# show the text direction box in Writer/Web too, but only, if HTML export mode is not HTML3.2.
if( !(bWeb && bHTML32) && (bCJK || bCTL) &&
SFX_ITEM_UNKNOWN < rAttr.GetItemState(GetWhich( SID_ATTR_FRAMEDIRECTION )))
{
aTextFlowLbl.Show();
aTextFlowBox.Show();
aTextFlowBox.SetSelectHdl(LINK(this, SvxPageDescPage, FrameDirectionModify_Impl ));
aBspWin.EnableFrameDirection(sal_True);
}
Init_Impl();
FieldUnit eFUnit = GetModuleFieldUnit( &rAttr );
SetFieldUnit( aLeftMarginEdit, eFUnit );
SetFieldUnit( aRightMarginEdit, eFUnit );
SetFieldUnit( aTopMarginEdit, eFUnit );
SetFieldUnit( aBottomMarginEdit, eFUnit );
SetFieldUnit( aPaperWidthEdit, eFUnit );
SetFieldUnit( aPaperHeightEdit, eFUnit );
if ( SfxViewShell::Current() && SfxViewShell::Current()->GetPrinter() )
pImpl->mpDefPrinter = (Printer*)SfxViewShell::Current()->GetPrinter();
else
{
pImpl->mpDefPrinter = new Printer;
pImpl->mbDelPrinter = true;
}
MapMode aOldMode = pImpl->mpDefPrinter->GetMapMode();
pImpl->mpDefPrinter->SetMapMode( MAP_TWIP );
// First- und Last-Werte f"ur die R"ander setzen
Size aPaperSize = pImpl->mpDefPrinter->GetPaperSize();
Size aPrintSize = pImpl->mpDefPrinter->GetOutputSize();
/*
* einen Punkt ( 0,0 ) in logische Koordinaten zu konvertieren,
* sieht aus wie Unsinn; ist aber sinnvoll, wenn der Ursprung des
* Koordinatensystems verschoben ist.
*/
Point aPrintOffset = pImpl->mpDefPrinter->GetPageOffset() -
pImpl->mpDefPrinter->PixelToLogic( Point() );
pImpl->mpDefPrinter->SetMapMode( aOldMode );
long nOffset = !aPrintOffset.X() && !aPrintOffset.Y() ? 0 : PRINT_OFFSET;
aLeftMarginEdit.SetFirst( aLeftMarginEdit.Normalize( aPrintOffset.X() ), FUNIT_TWIP );
nFirstLeftMargin = aLeftMarginEdit.GetFirst();
aRightMarginEdit.SetFirst( aRightMarginEdit.Normalize(
aPaperSize.Width() - aPrintSize.Width() - aPrintOffset.X() + nOffset ), FUNIT_TWIP);
nFirstRightMargin = aRightMarginEdit.GetFirst();
aTopMarginEdit.SetFirst( aTopMarginEdit.Normalize( aPrintOffset.Y() ), FUNIT_TWIP );
nFirstTopMargin = aTopMarginEdit.GetFirst();
aBottomMarginEdit.SetFirst( aBottomMarginEdit.Normalize(
aPaperSize.Height() - aPrintSize.Height() - aPrintOffset.Y() + nOffset ), FUNIT_TWIP );
nFirstBottomMargin = aBottomMarginEdit.GetFirst();
aLeftMarginEdit.SetLast( aLeftMarginEdit.Normalize(
aPrintOffset.X() + aPrintSize.Width() ), FUNIT_TWIP );
nLastLeftMargin = aLeftMarginEdit.GetLast();
aRightMarginEdit.SetLast( aRightMarginEdit.Normalize(
aPrintOffset.X() + aPrintSize.Width() ), FUNIT_TWIP );
nLastRightMargin = aRightMarginEdit.GetLast();
aTopMarginEdit.SetLast( aTopMarginEdit.Normalize(
aPrintOffset.Y() + aPrintSize.Height() ), FUNIT_TWIP );
nLastTopMargin = aTopMarginEdit.GetLast();
aBottomMarginEdit.SetLast( aBottomMarginEdit.Normalize(
aPrintOffset.Y() + aPrintSize.Height() ), FUNIT_TWIP );
nLastBottomMargin = aBottomMarginEdit.GetLast();
}
// -----------------------------------------------------------------------
SvxPageDescPage::~SvxPageDescPage()
{
delete pImpl;
}
// -----------------------------------------------------------------------
void SvxPageDescPage::Init_Impl()
{
aLeftText = aLeftMarginLbl.GetText();
aRightText = aRightMarginLbl.GetText();
// Handler einstellen
aLayoutBox.SetSelectHdl( LINK( this, SvxPageDescPage, LayoutHdl_Impl ) );
aPaperTrayBox.SetGetFocusHdl(
LINK( this, SvxPageDescPage, PaperBinHdl_Impl ) );
aPaperSizeBox.SetSelectHdl(
LINK( this, SvxPageDescPage, PaperSizeSelect_Impl ) );
aPaperWidthEdit.SetModifyHdl(
LINK( this, SvxPageDescPage, PaperSizeModify_Impl ) );
aPaperHeightEdit.SetModifyHdl(
LINK( this, SvxPageDescPage, PaperSizeModify_Impl ) );
aLandscapeBtn.SetClickHdl(
LINK( this, SvxPageDescPage, SwapOrientation_Impl ) );
aPortraitBtn.SetClickHdl(
LINK( this, SvxPageDescPage, SwapOrientation_Impl ) );
Link aLink = LINK( this, SvxPageDescPage, BorderModify_Impl );
aLeftMarginEdit.SetModifyHdl( aLink );
aRightMarginEdit.SetModifyHdl( aLink );
aTopMarginEdit.SetModifyHdl( aLink );
aBottomMarginEdit.SetModifyHdl( aLink );
aLink = LINK( this, SvxPageDescPage, RangeHdl_Impl );
aPaperWidthEdit.SetLoseFocusHdl( aLink );
aPaperHeightEdit.SetLoseFocusHdl( aLink );
aLeftMarginEdit.SetLoseFocusHdl( aLink );
aRightMarginEdit.SetLoseFocusHdl( aLink );
aTopMarginEdit.SetLoseFocusHdl( aLink );
aBottomMarginEdit.SetLoseFocusHdl( aLink );
aHorzBox.SetClickHdl( LINK( this, SvxPageDescPage, CenterHdl_Impl ) );
aVertBox.SetClickHdl( LINK( this, SvxPageDescPage, CenterHdl_Impl ) );
}
// -----------------------------------------------------------------------
void SvxPageDescPage::Reset( const SfxItemSet& rSet )
{
SfxItemPool* pPool = rSet.GetPool();
DBG_ASSERT( pPool, "Wo ist der Pool" );
SfxMapUnit eUnit = pPool->GetMetric( GetWhich( SID_ATTR_LRSPACE ) );
// R"ander (Links/Rechts) einstellen
const SfxPoolItem* pItem = GetItem( rSet, SID_ATTR_LRSPACE );
if ( pItem )
{
const SvxLRSpaceItem& rLRSpace = (const SvxLRSpaceItem&)*pItem;
SetMetricValue( aLeftMarginEdit, rLRSpace.GetLeft(), eUnit );
aBspWin.SetLeft(
(USHORT)ConvertLong_Impl( (long)rLRSpace.GetLeft(), eUnit ) );
SetMetricValue( aRightMarginEdit, rLRSpace.GetRight(), eUnit );
aBspWin.SetRight(
(USHORT)ConvertLong_Impl( (long)rLRSpace.GetRight(), eUnit ) );
}
// R"ander (Oben/Unten) einstellen
pItem = GetItem( rSet, SID_ATTR_ULSPACE );
if ( pItem )
{
const SvxULSpaceItem& rULSpace = (const SvxULSpaceItem&)*pItem;
SetMetricValue( aTopMarginEdit, rULSpace.GetUpper(), eUnit );
aBspWin.SetTop(
(USHORT)ConvertLong_Impl( (long)rULSpace.GetUpper(), eUnit ) );
SetMetricValue( aBottomMarginEdit, rULSpace.GetLower(), eUnit );
aBspWin.SetBottom(
(USHORT)ConvertLong_Impl( (long)rULSpace.GetLower(), eUnit ) );
}
// allgemeine Seitendaten
SvxNumType eNumType = SVX_ARABIC;
bLandscape = ( pImpl->mpDefPrinter->GetOrientation() == ORIENTATION_LANDSCAPE );
USHORT nUse = (USHORT)SVX_PAGE_ALL;
pItem = GetItem( rSet, SID_ATTR_PAGE );
if ( pItem )
{
const SvxPageItem& rItem = (const SvxPageItem&)*pItem;
eNumType = rItem.GetNumType();
nUse = (SvxPageUsage)rItem.GetPageUsage();
bLandscape = rItem.IsLandscape();
}
// Ausrichtung
aLayoutBox.SelectEntryPos( ::PageUsageToPos_Impl( nUse ) );
aBspWin.SetUsage( nUse );
LayoutHdl_Impl( 0 );
// Numerierungsart der Seitenvorlage einstellen
aNumberFormatBox.SelectEntryPos( eNumType );
// Aktueller Papierschacht
aPaperTrayBox.Clear();
BYTE nPaperBin = PAPERBIN_PRINTER_SETTINGS;
pItem = GetItem( rSet, SID_ATTR_PAGE_PAPERBIN );
if ( pItem )
{
nPaperBin = ( (const SvxPaperBinItem*)pItem )->GetValue();
if ( nPaperBin >= pImpl->mpDefPrinter->GetPaperBinCount() )
nPaperBin = PAPERBIN_PRINTER_SETTINGS;
}
String aBinName;
if ( PAPERBIN_PRINTER_SETTINGS == nPaperBin )
aBinName = SVX_RESSTR( RID_SVXSTR_PAPERBIN_SETTINGS );
else
aBinName = pImpl->mpDefPrinter->GetPaperBinName( (USHORT)nPaperBin );
USHORT nEntryPos = aPaperTrayBox.InsertEntry( aBinName );
aPaperTrayBox.SetEntryData( nEntryPos, (void*)(ULONG)nPaperBin );
aPaperTrayBox.SelectEntry( aBinName );
// Size rausholen
Size aPaperSize = SvxPaperInfo::GetPaperSize( pImpl->mpDefPrinter );
pItem = GetItem( rSet, SID_ATTR_PAGE_SIZE );
if ( pItem )
aPaperSize = ( (const SvxSizeItem*)pItem )->GetSize();
FASTBOOL bOrientationSupport =
pImpl->mpDefPrinter->HasSupport( SUPPORT_SET_ORIENTATION );
#ifdef OS2
// unter OS/2 wird bei HasSupport() immer TRUE returned
// aber nur als Dummy, deshalb FALSE
bOrientationSupport = FALSE;
#endif
if ( !bOrientationSupport &&
aPaperSize.Width() > aPaperSize.Height() )
bLandscape = TRUE;
aLandscapeBtn.Check( bLandscape );
aPortraitBtn.Check( !bLandscape );
aBspWin.SetSize( Size( ConvertLong_Impl( aPaperSize.Width(), eUnit ),
ConvertLong_Impl( aPaperSize.Height(), eUnit ) ) );
// Werte in die Edits eintragen
SetMetricValue( aPaperHeightEdit, aPaperSize.Height(), eUnit );
SetMetricValue( aPaperWidthEdit, aPaperSize.Width(), eUnit );
aPaperSizeBox.Clear();
// Papierformate
Size aTmpSize = aPaperSize;
if ( bLandscape )
Swap( aTmpSize );
// aktuelles Format
SvxPaper ePaper = SvxPaperInfo::GetPaper( aTmpSize, (MapUnit)eUnit, TRUE );
USHORT nActPos = LISTBOX_ENTRY_NOTFOUND;
USHORT nAryId = RID_SVXSTRARY_PAPERSIZE_STD;
if ( ePaperStart != SVX_PAPER_A3 )
nAryId = RID_SVXSTRARY_PAPERSIZE_DRAW;
ResStringArray aPaperAry( SVX_RES( nAryId ) );
USHORT nCnt = aPaperAry.Count();
for ( USHORT i = 0; i < nCnt; ++i )
{
String aStr = aPaperAry.GetString(i);
SvxPaper eSize = (SvxPaper)aPaperAry.GetValue(i);
USHORT nPos = aPaperSizeBox.InsertEntry( aStr );
aPaperSizeBox.SetEntryData( nPos, (void*)(ULONG)eSize );
if ( eSize == ePaper )
nActPos = nPos;
}
// aktuelles Papierformat selektieren
aPaperSizeBox.SelectEntryPos( nActPos );
// Applikationsspezifisch
switch ( eMode )
{
case SVX_PAGE_MODE_CENTER:
{
aTblAlignFT.Show();
aHorzBox.Show();
aVertBox.Show();
DisableVerticalPageDir();
// Horizontale Ausrichtung
pItem = GetItem( rSet, SID_ATTR_PAGE_EXT1 );
aHorzBox.Check( pItem ? ( (const SfxBoolItem*)pItem )->GetValue()
: FALSE );
// Vertikale Ausrichtung
pItem = GetItem( rSet, SID_ATTR_PAGE_EXT2 );
aVertBox.Check( pItem ? ( (const SfxBoolItem*)pItem )->GetValue()
: FALSE );
// Beispiel-Fenster auf Tabelle setzen
aBspWin.SetTable( TRUE );
aBspWin.SetHorz( aHorzBox.IsChecked() );
aBspWin.SetVert( aVertBox.IsChecked() );
break;
}
case SVX_PAGE_MODE_PRESENTATION:
{
DisableVerticalPageDir();
aAdaptBox.Show();
pItem = GetItem( rSet, SID_ATTR_PAGE_EXT1 );
aAdaptBox.Check( pItem ?
( (const SfxBoolItem*)pItem )->GetValue() : FALSE );
//!!! hidden, weil von StarDraw nicht implementiert
aLayoutBox.Hide();
aPageText.Hide();
break;
}
}
// im Beispiel Hintergrund und Umrandung anzeigen
ResetBackground_Impl( rSet );
//! UpdateExample_Impl();
RangeHdl_Impl( 0 );
// Header Footer anzeigen
InitHeadFoot_Impl( rSet );
// R"ander auf Hoch/Quer updaten, dann Beispiel updaten
bBorderModified = FALSE;
SwapFirstValues_Impl( FALSE );
UpdateExample_Impl();
// Alte Werte sichern
aLeftMarginEdit.SaveValue();
aRightMarginEdit.SaveValue();
aTopMarginEdit.SaveValue();
aBottomMarginEdit.SaveValue();
aLayoutBox.SaveValue();
aNumberFormatBox.SaveValue();
aPaperSizeBox.SaveValue();
aPaperWidthEdit.SaveValue();
aPaperHeightEdit.SaveValue();
aPortraitBtn.SaveValue();
aLandscapeBtn.SaveValue();
aPaperTrayBox.SaveValue();
aVertBox.SaveValue();
aHorzBox.SaveValue();
aAdaptBox.SaveValue();
CheckMarginEdits( true );
// Registerhaltigkeit
if(SFX_ITEM_SET == rSet.GetItemState(SID_SWREGISTER_MODE))
{
aRegisterCB.Check(((const SfxBoolItem&)rSet.Get(
SID_SWREGISTER_MODE)).GetValue());
aRegisterCB.SaveValue();
RegisterModify(&aRegisterCB);
}
if(SFX_ITEM_SET == rSet.GetItemState(SID_SWREGISTER_COLLECTION))
{
aRegisterLB.SelectEntry(
((const SfxStringItem&)rSet.Get(SID_SWREGISTER_COLLECTION)).GetValue());
aRegisterLB.SaveValue();
}
SfxItemState eState = rSet.GetItemState( GetWhich( SID_ATTR_FRAMEDIRECTION ),
TRUE, &pItem );
if( SFX_ITEM_UNKNOWN != eState )
{
sal_uInt32 nVal = SFX_ITEM_SET == eState
? ((SvxFrameDirectionItem*)pItem)->GetValue()
: 0;
aTextFlowBox.SelectEntryValue( static_cast< SvxFrameDirection >( nVal ) );
aTextFlowBox.SaveValue();
aBspWin.SetFrameDirection(nVal);
}
}
// -----------------------------------------------------------------------
void SvxPageDescPage::FillUserData()
{
if ( SVX_PAGE_MODE_PRESENTATION == eMode )
SetUserData( UniString::CreateFromInt32( (sal_Int32)aAdaptBox.IsChecked() ) );
}
// -----------------------------------------------------------------------
BOOL SvxPageDescPage::FillItemSet( SfxItemSet& rSet )
{
BOOL bModified = FALSE;
const SfxItemSet& rOldSet = GetItemSet();
SfxItemPool* pPool = rOldSet.GetPool();
DBG_ASSERT( pPool, "Wo ist der Pool" );
USHORT nWhich = GetWhich( SID_ATTR_LRSPACE );
SfxMapUnit eUnit = pPool->GetMetric( nWhich );
const SfxPoolItem* pOld = 0;
// alten linken und rechten Rand kopieren
SvxLRSpaceItem aMargin( (const SvxLRSpaceItem&)rOldSet.Get( nWhich ) );
// alten oberen und unteren Rand kopieren
nWhich = GetWhich( SID_ATTR_ULSPACE );
SvxULSpaceItem aTopMargin( (const SvxULSpaceItem&)rOldSet.Get( nWhich ) );
if ( aLeftMarginEdit.GetText() != aLeftMarginEdit.GetSavedValue() )
{
aMargin.SetLeft( (USHORT)GetCoreValue( aLeftMarginEdit, eUnit ) );
bModified |= TRUE;
}
if ( aRightMarginEdit.GetText() != aRightMarginEdit.GetSavedValue() )
{
aMargin.SetRight( (USHORT)GetCoreValue( aRightMarginEdit, eUnit ) );
bModified |= TRUE;
}
// Linken und rechten Rand setzen
if ( bModified )
{
pOld = GetOldItem( rSet, SID_ATTR_LRSPACE );
if ( !pOld || !( *(const SvxLRSpaceItem*)pOld == aMargin ) )
rSet.Put( aMargin );
else
bModified = FALSE;
}
BOOL bMod = FALSE;
if ( aTopMarginEdit.GetText() != aTopMarginEdit.GetSavedValue() )
{
aTopMargin.SetUpper( (USHORT)GetCoreValue( aTopMarginEdit, eUnit ) );
bMod |= TRUE;
}
if ( aBottomMarginEdit.GetText() != aBottomMarginEdit.GetSavedValue() )
{
aTopMargin.SetLower( (USHORT)GetCoreValue( aBottomMarginEdit, eUnit ) );
bMod |= TRUE;
}
// unteren oberen Rand setzen
//
if ( bMod )
{
pOld = GetOldItem( rSet, SID_ATTR_ULSPACE );
if ( !pOld || !( *(const SvxULSpaceItem*)pOld == aTopMargin ) )
{
bModified |= TRUE;
rSet.Put( aTopMargin );
}
}
// Druckerschacht
nWhich = GetWhich( SID_ATTR_PAGE_PAPERBIN );
USHORT nPos = aPaperTrayBox.GetSelectEntryPos();
USHORT nBin = (USHORT)(ULONG)aPaperTrayBox.GetEntryData( nPos );
pOld = GetOldItem( rSet, SID_ATTR_PAGE_PAPERBIN );
if ( !pOld || ( (const SvxPaperBinItem*)pOld )->GetValue() != nBin )
{
rSet.Put( SvxPaperBinItem( nWhich, (BYTE)nBin ) );
bModified |= TRUE;
}
nPos = aPaperSizeBox.GetSelectEntryPos();
SvxPaper ePaper = (SvxPaper)(ULONG)aPaperSizeBox.GetEntryData( nPos );
const USHORT nOld = aPaperSizeBox.GetSavedValue();
BOOL bChecked = aLandscapeBtn.IsChecked();
if ( SVX_PAPER_USER == ePaper )
{
if ( nOld != nPos ||
aPaperWidthEdit.IsValueModified() ||
aPaperHeightEdit.IsValueModified() ||
bChecked != aLandscapeBtn.GetSavedValue() )
{
Size aSize( GetCoreValue( aPaperWidthEdit, eUnit ),
GetCoreValue( aPaperHeightEdit, eUnit ) );
pOld = GetOldItem( rSet, SID_ATTR_PAGE_SIZE );
if ( !pOld || ( (const SvxSizeItem*)pOld )->GetSize() != aSize )
{
rSet.Put( SvxSizeItem( GetWhich(SID_ATTR_PAGE_SIZE), aSize ) );
bModified |= TRUE;
}
}
}
else
{
if ( nOld != nPos || bChecked != aLandscapeBtn.GetSavedValue() )
{
Size aSize( SvxPaperInfo::GetPaperSize( ePaper, (MapUnit)eUnit ) );
if ( bChecked )
Swap( aSize );
pOld = GetOldItem( rSet, SID_ATTR_PAGE_SIZE );
if ( !pOld || ( (const SvxSizeItem*)pOld )->GetSize() != aSize )
{
rSet.Put( SvxSizeItem( GetWhich(SID_ATTR_PAGE_SIZE), aSize ) );
bModified |= TRUE;
}
}
}
// sonstiges Zeug der Page
nWhich = GetWhich( SID_ATTR_PAGE );
SvxPageItem aPage( (const SvxPageItem&)rOldSet.Get( nWhich ) );
bMod = aLayoutBox.GetSelectEntryPos() != aLayoutBox.GetSavedValue();
if ( bMod )
aPage.SetPageUsage(
::PosToPageUsage_Impl( aLayoutBox.GetSelectEntryPos() ) );
if ( bChecked != aLandscapeBtn.GetSavedValue() )
{
aPage.SetLandscape(bChecked);
bMod |= TRUE;
}
// Einstellen der Numerierungsart der Seite
nPos = aNumberFormatBox.GetSelectEntryPos();
if ( nPos != aNumberFormatBox.GetSavedValue() )
{
aPage.SetNumType( (SvxNumType)nPos );
bMod |= TRUE;
}
if ( bMod )
{
pOld = GetOldItem( rSet, SID_ATTR_PAGE );
if ( !pOld || !( *(const SvxPageItem*)pOld == aPage ) )
{
rSet.Put( aPage );
bModified |= TRUE;
}
}
else if ( SFX_ITEM_DEFAULT == rOldSet.GetItemState( nWhich ) )
rSet.ClearItem( nWhich );
else
rSet.Put( rOldSet.Get( nWhich ) );
// Modispezifische Controls auswerten
switch ( eMode )
{
case SVX_PAGE_MODE_CENTER:
{
if ( aHorzBox.IsChecked() != aHorzBox.GetSavedValue() )
{
SfxBoolItem aHorz( GetWhich( SID_ATTR_PAGE_EXT1 ),
aHorzBox.IsChecked() );
rSet.Put( aHorz );
bModified |= TRUE;
}
if ( aVertBox.IsChecked() != aVertBox.GetSavedValue() )
{
SfxBoolItem aVert( GetWhich( SID_ATTR_PAGE_EXT2 ),
aVertBox.IsChecked() );
rSet.Put( aVert );
bModified |= TRUE;
}
break;
}
case SVX_PAGE_MODE_PRESENTATION:
{
// immer putten, damit Draw das auswerten kann
rSet.Put( SfxBoolItem( GetWhich( SID_ATTR_PAGE_EXT1 ),
aAdaptBox.IsChecked() ) );
bModified |= TRUE;
break;
}
// bei Standard tut sich nichts
}
if(aRegisterCB.IsVisible() &&
(aRegisterCB.IsChecked() || aRegisterCB.GetSavedValue() != aRegisterCB.IsChecked()))
{
const SfxBoolItem& rRegItem = (const SfxBoolItem&)rOldSet.Get(SID_SWREGISTER_MODE);
SfxBoolItem* pRegItem = (SfxBoolItem*)rRegItem.Clone();
BOOL bCheck = aRegisterCB.IsChecked();
pRegItem->SetValue(bCheck);
rSet.Put(*pRegItem);
bModified |= TRUE;
if(bCheck)
{
bModified |= TRUE;
rSet.Put(SfxStringItem(SID_SWREGISTER_COLLECTION,
aRegisterLB.GetSelectEntry()));
}
delete pRegItem;
}
SvxFrameDirection eDirection = aTextFlowBox.GetSelectEntryValue();
if( aTextFlowBox.IsVisible() && (eDirection != aTextFlowBox.GetSavedValue()) )
{
rSet.Put( SvxFrameDirectionItem( eDirection, GetWhich( SID_ATTR_FRAMEDIRECTION ) ) );
bModified = TRUE;
}
return bModified;
}
// -----------------------------------------------------------------------
IMPL_LINK( SvxPageDescPage, LayoutHdl_Impl, ListBox *, EMPTYARG )
{
// innen au\sen umschalten
const USHORT nPos = PosToPageUsage_Impl( aLayoutBox.GetSelectEntryPos() );
if ( nPos == SVX_PAGE_MIRROR )
{
if ( aLeftMarginLbl.GetText() != aInsideText )
aLeftMarginLbl.SetText( aInsideText );
if ( aRightMarginLbl.GetText() != aOutsideText )
aRightMarginLbl.SetText( aOutsideText );
}
else
{
if ( aLeftMarginLbl.GetText() != aLeftText )
aLeftMarginLbl.SetText( aLeftText );
if ( aRightMarginLbl.GetText() != aRightText )
aRightMarginLbl.SetText( aRightText );
}
UpdateExample_Impl();
return 0;
}
// -----------------------------------------------------------------------
IMPL_LINK( SvxPageDescPage, PaperBinHdl_Impl, ListBox *, EMPTYARG )
{
if ( aPaperTrayBox.GetEntryCount() > 1 )
// schon gef"ullt
return 0;
// Schacht-Box initialisieren
String aOldName = aPaperTrayBox.GetSelectEntry();
aPaperTrayBox.SetUpdateMode( FALSE );
aPaperTrayBox.Clear();
USHORT nEntryPos = aPaperTrayBox.InsertEntry(
SVX_RESSTR( RID_SVXSTR_PAPERBIN_SETTINGS ) );
aPaperTrayBox.SetEntryData( nEntryPos,
(void*)(ULONG)PAPERBIN_PRINTER_SETTINGS );
String aPaperBin( SVX_RES( RID_SVXSTR_PAPERBIN ) );
USHORT nBinCount = pImpl->mpDefPrinter->GetPaperBinCount();
for ( USHORT i = 0; i < nBinCount; ++i )
{
String aName = pImpl->mpDefPrinter->GetPaperBinName(i);
if ( !aName.Len() )
{
aName = aPaperBin;
aName.Append( sal_Unicode(' ') );
aName.Append( UniString::CreateFromInt32( i+1 ) );
}
nEntryPos = aPaperTrayBox.InsertEntry( aName );
aPaperTrayBox.SetEntryData( nEntryPos, (void*)(ULONG)i );
}
aPaperTrayBox.SelectEntry( aOldName );
aPaperTrayBox.SetUpdateMode( TRUE );
return 0;
}
// -----------------------------------------------------------------------
IMPL_LINK( SvxPageDescPage, PaperSizeSelect_Impl, ListBox *, pBox )
{
const USHORT nPos = pBox->GetSelectEntryPos();
SvxPaper ePaper = (SvxPaper)(ULONG)aPaperSizeBox.GetEntryData( nPos );
if ( ePaper != SVX_PAPER_USER )
{
Size aSize( SvxPaperInfo::GetPaperSize( ePaper ) );
if ( aLandscapeBtn.IsChecked() )
Swap( aSize );
if ( aSize.Height() < aPaperHeightEdit.GetMin( FUNIT_TWIP ) )
aPaperHeightEdit.SetMin(
aPaperHeightEdit.Normalize( aSize.Height() ), FUNIT_TWIP );
if ( aSize.Width() < aPaperWidthEdit.GetMin( FUNIT_TWIP ) )
aPaperWidthEdit.SetMin(
aPaperWidthEdit.Normalize( aSize.Width() ), FUNIT_TWIP );
SetMetricValue( aPaperHeightEdit, aSize.Height(), SFX_MAPUNIT_TWIP );
SetMetricValue( aPaperWidthEdit, aSize.Width(), SFX_MAPUNIT_TWIP );
// R"ander ggf. neu berechnen
CalcMargin_Impl();
RangeHdl_Impl( 0 );
UpdateExample_Impl();
if ( eMode == SVX_PAGE_MODE_PRESENTATION )
{
// Draw: bei Papierformat soll der Rand 1cm betragen
long nTmp = 0;
BOOL bScreen = ( SVX_PAPER_SCREEN == ePaper );
if ( !bScreen )
// bei Bildschirm keinen Rand
nTmp = 1; // entspr. 1cm
// Abfragen, ob fuer Raender 0 gesetzt ist:
if ( bScreen || aRightMarginEdit.GetValue() == 0 )
{
SetMetricValue( aRightMarginEdit, nTmp, SFX_MAPUNIT_CM );
if ( !bScreen &&
aRightMarginEdit.GetFirst() > aRightMarginEdit.GetValue() )
aRightMarginEdit.SetValue( aRightMarginEdit.GetFirst() );
}
if ( bScreen || aLeftMarginEdit.GetValue() == 0 )
{
SetMetricValue( aLeftMarginEdit, nTmp, SFX_MAPUNIT_CM );
if ( !bScreen &&
aLeftMarginEdit.GetFirst() > aLeftMarginEdit.GetValue() )
aLeftMarginEdit.SetValue( aLeftMarginEdit.GetFirst() );
}
if ( bScreen || aBottomMarginEdit.GetValue() == 0 )
{
SetMetricValue( aBottomMarginEdit, nTmp, SFX_MAPUNIT_CM );
if ( !bScreen &&
aBottomMarginEdit.GetFirst() > aBottomMarginEdit.GetValue() )
aBottomMarginEdit.SetValue( aBottomMarginEdit.GetFirst() );
}
if ( bScreen || aTopMarginEdit.GetValue() == 0 )
{
SetMetricValue( aTopMarginEdit, nTmp, SFX_MAPUNIT_CM );
if ( !bScreen &&
aTopMarginEdit.GetFirst() > aTopMarginEdit.GetValue() )
aTopMarginEdit.SetValue( aTopMarginEdit.GetFirst() );
}
UpdateExample_Impl();
}
}
return 0;
}
// -----------------------------------------------------------------------
IMPL_LINK( SvxPageDescPage, PaperSizeModify_Impl, Edit *, EMPTYARG )
{
USHORT nWhich = GetWhich( SID_ATTR_LRSPACE );
SfxMapUnit eUnit = GetItemSet().GetPool()->GetMetric( nWhich );
Size aSize( GetCoreValue( aPaperWidthEdit, eUnit ),
GetCoreValue( aPaperHeightEdit, eUnit ) );
SvxPaper ePaper = SvxPaperInfo::GetPaper( aSize, (MapUnit)eUnit, TRUE );
USHORT nEntryCount = aPaperSizeBox.GetEntryCount();
for ( USHORT i = 0; i < nEntryCount; ++i )
{
SvxPaper eTmp = (SvxPaper)(ULONG)aPaperSizeBox.GetEntryData(i);
if ( eTmp == ePaper )
{
aPaperSizeBox.SelectEntryPos(i);
break;
}
}
UpdateExample_Impl();
return 0;
}
// -----------------------------------------------------------------------
IMPL_LINK( SvxPageDescPage, SwapOrientation_Impl, RadioButton *, pBtn )
{
if ( !bLandscape && pBtn == &aLandscapeBtn ||
bLandscape && pBtn == &aPortraitBtn )
{
bLandscape = aLandscapeBtn.IsChecked();
const long lWidth = GetCoreValue( aPaperWidthEdit, SFX_MAPUNIT_TWIP );
const long lHeight = GetCoreValue( aPaperHeightEdit, SFX_MAPUNIT_TWIP );
// swappen
SetMetricValue( aPaperWidthEdit, lHeight, SFX_MAPUNIT_TWIP );
SetMetricValue( aPaperHeightEdit, lWidth, SFX_MAPUNIT_TWIP );
// R"ander ggf. neu berechnen
CalcMargin_Impl();
PaperSizeSelect_Impl( &aPaperSizeBox );
RangeHdl_Impl( 0 );
SwapFirstValues_Impl( bBorderModified );
UpdateExample_Impl();
}
return 0;
}
// -----------------------------------------------------------------------
void SvxPageDescPage::SwapFirstValues_Impl( FASTBOOL bSet )
{
MapMode aOldMode = pImpl->mpDefPrinter->GetMapMode();
Orientation eOri = ORIENTATION_PORTRAIT;
if ( bLandscape )
eOri = ORIENTATION_LANDSCAPE;
Orientation eOldOri = pImpl->mpDefPrinter->GetOrientation();
pImpl->mpDefPrinter->SetOrientation( eOri );
pImpl->mpDefPrinter->SetMapMode( MAP_TWIP );
// First- und Last-Werte f"ur die R"ander setzen
Size aPaperSize = pImpl->mpDefPrinter->GetPaperSize();
Size aPrintSize = pImpl->mpDefPrinter->GetOutputSize();
/*
* einen Punkt ( 0,0 ) in logische Koordinaten zu konvertieren,
* sieht aus wie Unsinn; ist aber sinnvoll, wenn der Ursprung des
* Koordinatensystems verschoben ist.
*/
Point aPrintOffset = pImpl->mpDefPrinter->GetPageOffset() -
pImpl->mpDefPrinter->PixelToLogic( Point() );
pImpl->mpDefPrinter->SetMapMode( aOldMode );
pImpl->mpDefPrinter->SetOrientation( eOldOri );
long nSetL = aLeftMarginEdit.Denormalize(
aLeftMarginEdit.GetValue( FUNIT_TWIP ) );
long nSetR = aRightMarginEdit.Denormalize(
aRightMarginEdit.GetValue( FUNIT_TWIP ) );
long nSetT = aTopMarginEdit.Denormalize(
aTopMarginEdit.GetValue( FUNIT_TWIP ) );
long nSetB = aBottomMarginEdit.Denormalize(
aBottomMarginEdit.GetValue( FUNIT_TWIP ) );
long nOffset = !aPrintOffset.X() && !aPrintOffset.Y() ? 0 : PRINT_OFFSET;
long nNewL = aPrintOffset.X();
long nNewR =
aPaperSize.Width() - aPrintSize.Width() - aPrintOffset.X() + nOffset;
long nNewT = aPrintOffset.Y();
long nNewB =
aPaperSize.Height() - aPrintSize.Height() - aPrintOffset.Y() + nOffset;
aLeftMarginEdit.SetFirst( aLeftMarginEdit.Normalize( nNewL ), FUNIT_TWIP );
nFirstLeftMargin = aLeftMarginEdit.GetFirst();
aRightMarginEdit.SetFirst( aRightMarginEdit.Normalize( nNewR ), FUNIT_TWIP );
nFirstRightMargin = aRightMarginEdit.GetFirst();
aTopMarginEdit.SetFirst( aTopMarginEdit.Normalize( nNewT ), FUNIT_TWIP );
nFirstTopMargin = aTopMarginEdit.GetFirst();
aBottomMarginEdit.SetFirst( aBottomMarginEdit.Normalize( nNewB ), FUNIT_TWIP );
nFirstBottomMargin = aBottomMarginEdit.GetFirst();
if ( bSet )
{
// ggf. auch die Werte umsetzen,
if ( nSetL < nNewL )
aLeftMarginEdit.SetValue( aLeftMarginEdit.Normalize( nNewL ),
FUNIT_TWIP );
if ( nSetR < nNewR )
aRightMarginEdit.SetValue( aRightMarginEdit.Normalize( nNewR ),
FUNIT_TWIP );
if ( nSetT < nNewT )
aTopMarginEdit.SetValue( aTopMarginEdit.Normalize( nNewT ),
FUNIT_TWIP );
if ( nSetB < nNewB )
aBottomMarginEdit.SetValue( aBottomMarginEdit.Normalize( nNewB ),
FUNIT_TWIP );
}
}
// -----------------------------------------------------------------------
IMPL_LINK_INLINE_START( SvxPageDescPage, BorderModify_Impl, MetricField *, EMPTYARG )
{
if ( !bBorderModified )
bBorderModified = TRUE;
UpdateExample_Impl();
return 0;
}
IMPL_LINK_INLINE_END( SvxPageDescPage, BorderModify_Impl, MetricField *, EMPTYARG )
// -----------------------------------------------------------------------
void SvxPageDescPage::UpdateExample_Impl()
{
// Size
Size aSize( GetCoreValue( aPaperWidthEdit, SFX_MAPUNIT_TWIP ),
GetCoreValue( aPaperHeightEdit, SFX_MAPUNIT_TWIP ) );
aBspWin.SetSize( aSize );
// R"ander
aBspWin.SetTop( GetCoreValue( aTopMarginEdit, SFX_MAPUNIT_TWIP ) );
aBspWin.SetBottom( GetCoreValue( aBottomMarginEdit, SFX_MAPUNIT_TWIP ) );
aBspWin.SetLeft( GetCoreValue( aLeftMarginEdit, SFX_MAPUNIT_TWIP ) );
aBspWin.SetRight( GetCoreValue( aRightMarginEdit, SFX_MAPUNIT_TWIP ) );
// Layout
aBspWin.SetUsage( PosToPageUsage_Impl( aLayoutBox.GetSelectEntryPos() ) );
aBspWin.Invalidate();
}
// -----------------------------------------------------------------------
void SvxPageDescPage::ResetBackground_Impl( const SfxItemSet& rSet )
{
USHORT nWhich = GetWhich( SID_ATTR_PAGE_HEADERSET );
if ( rSet.GetItemState( nWhich, FALSE ) == SFX_ITEM_SET )
{
const SvxSetItem& rSetItem =
(const SvxSetItem&)rSet.Get( nWhich, FALSE );
const SfxItemSet& rTmpSet = rSetItem.GetItemSet();
const SfxBoolItem& rOn =
(const SfxBoolItem&)rTmpSet.Get( GetWhich( SID_ATTR_PAGE_ON ) );
if ( rOn.GetValue() )
{
nWhich = GetWhich( SID_ATTR_BRUSH );
if ( rTmpSet.GetItemState( nWhich ) == SFX_ITEM_SET )
{
const SvxBrushItem& rItem =
(const SvxBrushItem&)rTmpSet.Get( nWhich );
aBspWin.SetHdColor( rItem.GetColor() );
}
nWhich = GetWhich( SID_ATTR_BORDER_OUTER );
if ( rTmpSet.GetItemState( nWhich ) == SFX_ITEM_SET )
{
const SvxBoxItem& rItem =
(const SvxBoxItem&)rTmpSet.Get( nWhich );
aBspWin.SetHdBorder( rItem );
}
}
}
nWhich = GetWhich( SID_ATTR_PAGE_FOOTERSET );
if ( rSet.GetItemState( nWhich, FALSE ) == SFX_ITEM_SET )
{
const SvxSetItem& rSetItem =
(const SvxSetItem&)rSet.Get( nWhich, FALSE );
const SfxItemSet& rTmpSet = rSetItem.GetItemSet();
const SfxBoolItem& rOn =
(const SfxBoolItem&)rTmpSet.Get( GetWhich( SID_ATTR_PAGE_ON ) );
if ( rOn.GetValue() )
{
nWhich = GetWhich( SID_ATTR_BRUSH );
if ( rTmpSet.GetItemState( nWhich ) == SFX_ITEM_SET )
{
const SvxBrushItem& rItem =
(const SvxBrushItem&)rTmpSet.Get( nWhich );
aBspWin.SetFtColor( rItem.GetColor() );
}
nWhich = GetWhich( SID_ATTR_BORDER_OUTER );
if ( rTmpSet.GetItemState( nWhich ) == SFX_ITEM_SET )
{
const SvxBoxItem& rItem =
(const SvxBoxItem&)rTmpSet.Get( nWhich );
aBspWin.SetFtBorder( rItem );
}
}
}
const SfxPoolItem* pItem = GetItem( rSet, SID_ATTR_BRUSH );
if ( pItem )
{
aBspWin.SetColor( ( (const SvxBrushItem*)pItem )->GetColor() );
const Graphic* pGrf = ( (const SvxBrushItem*)pItem )->GetGraphic();
if ( pGrf )
{
Bitmap aBitmap = pGrf->GetBitmap();
aBspWin.SetBitmap( &aBitmap );
}
else
aBspWin.SetBitmap( NULL );
}
pItem = GetItem( rSet, SID_ATTR_BORDER_OUTER );
if ( pItem )
aBspWin.SetBorder( (SvxBoxItem&)*pItem );
}
// -----------------------------------------------------------------------
void SvxPageDescPage::InitHeadFoot_Impl( const SfxItemSet& rSet )
{
bLandscape = aLandscapeBtn.IsChecked();
const SfxPoolItem* pItem = GetItem( rSet, SID_ATTR_PAGE_SIZE );
if ( pItem )
aBspWin.SetSize( ( (const SvxSizeItem*)pItem )->GetSize() );
const SvxSetItem* pSetItem = 0;
// Kopfzeilen-Attribute auswerten
if ( SFX_ITEM_SET ==
rSet.GetItemState( GetWhich( SID_ATTR_PAGE_HEADERSET ),
FALSE, (const SfxPoolItem**)&pSetItem ) )
{
const SfxItemSet& rHeaderSet = pSetItem->GetItemSet();
const SfxBoolItem& rHeaderOn =
(const SfxBoolItem&)rHeaderSet.Get( GetWhich( SID_ATTR_PAGE_ON ) );
if ( rHeaderOn.GetValue() )
{
const SvxSizeItem& rSize = (const SvxSizeItem&)
rHeaderSet.Get( GetWhich( SID_ATTR_PAGE_SIZE ) );
const SvxULSpaceItem& rUL = (const SvxULSpaceItem&)
rHeaderSet.Get( GetWhich( SID_ATTR_ULSPACE ) );
long nDist = rUL.GetLower();
aBspWin.SetHdHeight( rSize.GetSize().Height() - nDist );
aBspWin.SetHdDist( nDist );
const SvxLRSpaceItem& rLR = (const SvxLRSpaceItem&)
rHeaderSet.Get( GetWhich( SID_ATTR_LRSPACE ) );
aBspWin.SetHdLeft( rLR.GetLeft() );
aBspWin.SetHdRight( rLR.GetRight() );
aBspWin.SetHeader( TRUE );
}
else
aBspWin.SetHeader( FALSE );
// im Beispiel Hintergrund und Umrandung anzeigen
USHORT nWhich = GetWhich( SID_ATTR_BRUSH );
if ( rHeaderSet.GetItemState( nWhich ) >= SFX_ITEM_AVAILABLE )
{
const SvxBrushItem& rItem =
(const SvxBrushItem&)rHeaderSet.Get( nWhich );
aBspWin.SetHdColor( rItem.GetColor() );
}
nWhich = GetWhich( SID_ATTR_BORDER_OUTER );
if ( rHeaderSet.GetItemState( nWhich ) >= SFX_ITEM_AVAILABLE )
{
const SvxBoxItem& rItem =
(const SvxBoxItem&)rHeaderSet.Get( nWhich );
aBspWin.SetHdBorder( rItem );
}
}
// Fusszeilen-Attribute auswerten
if ( SFX_ITEM_SET ==
rSet.GetItemState( GetWhich( SID_ATTR_PAGE_FOOTERSET ),
FALSE, (const SfxPoolItem**)&pSetItem ) )
{
const SfxItemSet& rFooterSet = pSetItem->GetItemSet();
const SfxBoolItem& rFooterOn =
(const SfxBoolItem&)rFooterSet.Get( GetWhich( SID_ATTR_PAGE_ON ) );
if ( rFooterOn.GetValue() )
{
const SvxSizeItem& rSize = (const SvxSizeItem&)
rFooterSet.Get( GetWhich( SID_ATTR_PAGE_SIZE ) );
const SvxULSpaceItem& rUL = (const SvxULSpaceItem&)
rFooterSet.Get( GetWhich( SID_ATTR_ULSPACE ) );
long nDist = rUL.GetUpper();
aBspWin.SetFtHeight( rSize.GetSize().Height() - nDist );
aBspWin.SetFtDist( nDist );
const SvxLRSpaceItem& rLR = (const SvxLRSpaceItem&)
rFooterSet.Get( GetWhich( SID_ATTR_LRSPACE ) );
aBspWin.SetFtLeft( rLR.GetLeft() );
aBspWin.SetFtRight( rLR.GetRight() );
aBspWin.SetFooter( TRUE );
}
else
aBspWin.SetFooter( FALSE );
// im Beispiel Hintergrund und Umrandung anzeigen
USHORT nWhich = GetWhich( SID_ATTR_BRUSH );
if ( rFooterSet.GetItemState( nWhich ) >= SFX_ITEM_AVAILABLE )
{
const SvxBrushItem& rItem =
(const SvxBrushItem&)rFooterSet.Get( nWhich );
aBspWin.SetFtColor( rItem.GetColor() );
}
nWhich = GetWhich( SID_ATTR_BORDER_OUTER );
if ( rFooterSet.GetItemState( nWhich ) >= SFX_ITEM_AVAILABLE )
{
const SvxBoxItem& rItem =
(const SvxBoxItem&)rFooterSet.Get( nWhich );
aBspWin.SetFtBorder( rItem );
}
}
}
// -----------------------------------------------------------------------
void SvxPageDescPage::ActivatePage( const SfxItemSet& rSet )
{
InitHeadFoot_Impl( rSet );
ResetBackground_Impl( rSet );
RangeHdl_Impl( 0 );
}
// -----------------------------------------------------------------------
int SvxPageDescPage::DeactivatePage( SfxItemSet* pSet )
{
// Abfrage, ob die Seitenr"ander ausserhalb des Druckbereichs liegen
// Wenn nicht, dann den Anwender fragen, ob sie "ubernommen werden sollen.
// Wenn nicht, dann auf der TabPage bleiben.
USHORT nPos = aPaperSizeBox.GetSelectEntryPos();
SvxPaper ePaper = (SvxPaper)(ULONG)aPaperSizeBox.GetEntryData( nPos );
if ( ePaper != SVX_PAPER_SCREEN && IsMarginOutOfRange() )
{
if ( QueryBox( this, WB_YES_NO | WB_DEF_NO, aPrintRangeQueryText ).Execute() == RET_NO )
{
MetricField* pField = NULL;
if ( IsPrinterRangeOverflow( aLeftMarginEdit, nFirstLeftMargin, nLastLeftMargin, MARGIN_LEFT ) )
pField = &aLeftMarginEdit;
if ( IsPrinterRangeOverflow( aRightMarginEdit, nFirstRightMargin, nLastRightMargin, MARGIN_RIGHT )
&& !pField )
pField = &aRightMarginEdit;
if ( IsPrinterRangeOverflow( aTopMarginEdit, nFirstTopMargin, nLastTopMargin, MARGIN_TOP )
&& !pField )
pField = &aTopMarginEdit;
if ( IsPrinterRangeOverflow( aBottomMarginEdit, nFirstBottomMargin, nLastBottomMargin, MARGIN_BOTTOM )
&& !pField )
pField = &aBottomMarginEdit;
if ( pField )
pField->GrabFocus();
UpdateExample_Impl();
return KEEP_PAGE;
}
else
CheckMarginEdits( false );
}
if ( pSet )
{
FillItemSet( *pSet );
// ggf. hoch/quer putten
USHORT nWh = GetWhich( SID_ATTR_PAGE_SIZE );
SfxMapUnit eUnit = GetItemSet().GetPool()->GetMetric( nWh );
Size aSize( GetCoreValue( aPaperWidthEdit, eUnit ),
GetCoreValue( aPaperHeightEdit, eUnit ) );
// putten, wenn aktuelle Gr"o/se unterschiedlich zum Wert in pSet
const SvxSizeItem* pSize = (const SvxSizeItem*)GetItem( *pSet, SID_ATTR_PAGE_SIZE );
if ( aSize.Width() && ( !pSize || !IsEqualSize_Impl( pSize, aSize ) ) )
pSet->Put( SvxSizeItem( nWh, aSize ) );
}
return LEAVE_PAGE;
}
// -----------------------------------------------------------------------
IMPL_LINK( SvxPageDescPage, RangeHdl_Impl, Edit *, EMPTYARG )
{
// Aktuelle Header-Breite/H"ohe aus dem Bsp
long nHHeight = aBspWin.GetHdHeight();
long nHDist = aBspWin.GetHdDist();
// Aktuelle Footer-Breite/H"ohe aus dem Bsp
long nFHeight = aBspWin.GetFtHeight();
long nFDist = aBspWin.GetFtDist();
// Aktuelle Header/Footer-R"ander aus dem Bsp
long nHFLeft = Max( aBspWin.GetHdLeft(), aBspWin.GetFtLeft() );
long nHFRight = Max( aBspWin.GetHdRight(), aBspWin.GetFtRight() );
// Aktuelle Werte der Seitenr"ander
long nBT = aTopMarginEdit.Denormalize(aTopMarginEdit.GetValue(FUNIT_TWIP));
long nBB = aBottomMarginEdit.Denormalize(aBottomMarginEdit.GetValue(FUNIT_TWIP));
long nBL = aLeftMarginEdit.Denormalize(aLeftMarginEdit.GetValue(FUNIT_TWIP));
long nBR = aRightMarginEdit.Denormalize(aRightMarginEdit.GetValue(FUNIT_TWIP));
// Breite Umrandung der Seite berechnen
const SfxItemSet* pSet = &GetItemSet();
Size aBorder;
if ( pSet->GetItemState( GetWhich(SID_ATTR_BORDER_SHADOW) ) >=
SFX_ITEM_AVAILABLE &&
pSet->GetItemState( GetWhich(SID_ATTR_BORDER_OUTER) ) >=
SFX_ITEM_AVAILABLE )
{
aBorder = ( GetMinBorderSpace_Impl(
(const SvxShadowItem&)pSet->Get(GetWhich(SID_ATTR_BORDER_SHADOW)),
(const SvxBoxItem&)pSet->Get(GetWhich(SID_ATTR_BORDER_OUTER))));
}
long nH = aPaperHeightEdit.Denormalize(aPaperHeightEdit.GetValue(FUNIT_TWIP));
long nW = aPaperWidthEdit.Denormalize(aPaperWidthEdit.GetValue(FUNIT_TWIP));
// Grenzen Papier
// Maximum liegt bei 54cm
//
long nMin = nHHeight + nHDist + nFDist + nFHeight + nBT + nBB +
MINBODY + aBorder.Height();
aPaperHeightEdit.SetMin(aPaperHeightEdit.Normalize(nMin), FUNIT_TWIP);
nMin = MINBODY + nBL + nBR + aBorder.Width();
aPaperWidthEdit.SetMin(aPaperWidthEdit.Normalize(nMin), FUNIT_TWIP);
// Falls sich die Papiergr"o\se ge"adert hat
nH = aPaperHeightEdit.Denormalize(aPaperHeightEdit.GetValue(FUNIT_TWIP));
nW = aPaperWidthEdit.Denormalize(aPaperWidthEdit.GetValue(FUNIT_TWIP));
// Top
long nMax = nH - nBB - aBorder.Height() - MINBODY -
nFDist - nFHeight - nHDist - nHHeight;
aTopMarginEdit.SetMax(aTopMarginEdit.Normalize(nMax), FUNIT_TWIP);
// Bottom
nMax = nH - nBT - aBorder.Height() - MINBODY -
nFDist - nFHeight - nHDist - nHHeight;
aBottomMarginEdit.SetMax(aTopMarginEdit.Normalize(nMax), FUNIT_TWIP);
// Left
nMax = nW - nBR - MINBODY - aBorder.Width() - nHFLeft - nHFRight;
aLeftMarginEdit.SetMax(aLeftMarginEdit.Normalize(nMax), FUNIT_TWIP);
// Right
nMax = nW - nBL - MINBODY - aBorder.Width() - nHFLeft - nHFRight;
aRightMarginEdit.SetMax(aRightMarginEdit.Normalize(nMax), FUNIT_TWIP);
return 0;
}
// -----------------------------------------------------------------------
void SvxPageDescPage::CalcMargin_Impl()
{
// Aktuelle Werte der Seitenr"ander
long nBT = GetCoreValue( aTopMarginEdit, SFX_MAPUNIT_TWIP );
long nBB = GetCoreValue( aBottomMarginEdit, SFX_MAPUNIT_TWIP );
long nBL = GetCoreValue( aLeftMarginEdit, SFX_MAPUNIT_TWIP );
long nBR = GetCoreValue( aRightMarginEdit, SFX_MAPUNIT_TWIP );
long nH = GetCoreValue( aPaperHeightEdit, SFX_MAPUNIT_TWIP );
long nW = GetCoreValue( aPaperWidthEdit, SFX_MAPUNIT_TWIP );
long nWidth = nBL + nBR + MINBODY;
long nHeight = nBT + nBB + MINBODY;
if ( nWidth > nW || nHeight > nH )
{
if ( nWidth > nW )
{
long nTmp = nBL <= nBR ? nBR : nBL;
nTmp -= nWidth - nW;
if ( nBL <= nBR )
SetMetricValue( aRightMarginEdit, nTmp, SFX_MAPUNIT_TWIP );
else
SetMetricValue( aLeftMarginEdit, nTmp, SFX_MAPUNIT_TWIP );
}
if ( nHeight > nH )
{
long nTmp = nBT <= nBB ? nBB : nBT;
nTmp -= nHeight - nH;
if ( nBT <= nBB )
SetMetricValue( aBottomMarginEdit, nTmp, SFX_MAPUNIT_TWIP );
else
SetMetricValue( aTopMarginEdit, nTmp, SFX_MAPUNIT_TWIP );
}
}
}
// -----------------------------------------------------------------------
IMPL_LINK_INLINE_START( SvxPageDescPage, CenterHdl_Impl, CheckBox *, EMPTYARG )
{
aBspWin.SetHorz( aHorzBox.IsChecked() );
aBspWin.SetVert( aVertBox.IsChecked() );
UpdateExample_Impl();
return 0;
}
IMPL_LINK_INLINE_END( SvxPageDescPage, CenterHdl_Impl, CheckBox *, EMPTYARG )
// -----------------------------------------------------------------------
void SvxPageDescPage::SetCollectionList(const List* pList)
{
sStandardRegister = *(String*)pList->GetObject(0);
for( USHORT i = 1; i < pList->Count(); i++ )
{
aRegisterLB.InsertEntry(*(String*)pList->GetObject(i));
}
aRegisterCB .Show();
aRegisterFT .Show();
aRegisterLB.Show();
aRegisterCB.SetClickHdl(LINK(this, SvxPageDescPage, RegisterModify));
}
// -----------------------------------------------------------------------
IMPL_LINK( SvxPageDescPage, RegisterModify, CheckBox*, pBox )
{
BOOL bEnable = FALSE;
if(pBox->IsChecked())
{
bEnable = TRUE;
if(USHRT_MAX == aRegisterLB.GetSelectEntryPos())
aRegisterLB.SelectEntry(sStandardRegister);
}
aRegisterFT.Enable( bEnable );
aRegisterLB.Enable( bEnable );
return 0;
}
// ----------------------------------------------------------------------------
void SvxPageDescPage::DisableVerticalPageDir()
{
aTextFlowBox.RemoveEntryValue( FRMDIR_VERT_TOP_RIGHT );
aTextFlowBox.RemoveEntryValue( FRMDIR_VERT_TOP_LEFT );
if( aTextFlowBox.GetEntryCount() < 2 )
{
aTextFlowLbl.Hide();
aTextFlowBox.Hide();
aBspWin.EnableFrameDirection( sal_False );
}
}
IMPL_LINK( SvxPageDescPage, FrameDirectionModify_Impl, ListBox*, pListBox)
{
aBspWin.SetFrameDirection( (sal_uInt32) aTextFlowBox.GetSelectEntryValue() );
aBspWin.Invalidate();
return 0;
}
bool SvxPageDescPage::IsPrinterRangeOverflow(
MetricField& rField, long nFirstMargin, long nLastMargin, MarginPosition nPos )
{
bool bRet = false;
bool bCheck = ( ( pImpl->m_nPos & nPos ) == 0 );
long nValue = rField.GetValue();
if ( bCheck &&
( nValue < nFirstMargin || nValue > nLastMargin ) &&
rField.GetText() != rField.GetSavedValue() )
{
rField.SetValue( nValue < nFirstMargin ? nFirstMargin : nLastMargin );
bRet = true;
}
return bRet;
}
/** Check if a value of a margin edit is outside the printer paper margins
and save this information.
*/
void SvxPageDescPage::CheckMarginEdits( bool _bClear )
{
if ( _bClear )
pImpl->m_nPos = 0;
long nValue = aLeftMarginEdit.GetValue();
if ( nValue < nFirstLeftMargin || nValue > nLastLeftMargin )
pImpl->m_nPos |= MARGIN_LEFT;
nValue = aRightMarginEdit.GetValue();
if ( nValue < nFirstRightMargin || nValue > nLastRightMargin )
pImpl->m_nPos |= MARGIN_RIGHT;
nValue = aTopMarginEdit.GetValue();
if ( nValue < nFirstTopMargin || nValue > nLastTopMargin )
pImpl->m_nPos |= MARGIN_TOP;
nValue = aBottomMarginEdit.GetValue();
if ( nValue < nFirstBottomMargin || nValue > nLastBottomMargin )
pImpl->m_nPos |= MARGIN_BOTTOM;
}
bool SvxPageDescPage::IsMarginOutOfRange()
{
bool bRet = ( ( ( !( pImpl->m_nPos & MARGIN_LEFT ) &&
( aLeftMarginEdit.GetText() != aLeftMarginEdit.GetSavedValue() ) ) &&
( aLeftMarginEdit.GetValue() < nFirstLeftMargin ||
aLeftMarginEdit.GetValue() > nLastLeftMargin ) ) ||
( ( !( pImpl->m_nPos & MARGIN_RIGHT ) &&
( aRightMarginEdit.GetText() != aRightMarginEdit.GetSavedValue() ) ) &&
( aRightMarginEdit.GetValue() < nFirstRightMargin ||
aRightMarginEdit.GetValue() > nLastRightMargin ) ) ||
( ( !( pImpl->m_nPos & MARGIN_TOP ) &&
( aTopMarginEdit.GetText() != aTopMarginEdit.GetSavedValue() ) ) &&
( aTopMarginEdit.GetValue() < nFirstTopMargin ||
aTopMarginEdit.GetValue() > nLastTopMargin ) ) ||
( ( !( pImpl->m_nPos & MARGIN_BOTTOM ) &&
( aBottomMarginEdit.GetText() != aBottomMarginEdit.GetSavedValue() ) ) &&
( aBottomMarginEdit.GetValue() < nFirstBottomMargin ||
aBottomMarginEdit.GetValue() > nLastBottomMargin ) ) );
return bRet;
}
void SvxPageDescPage::PageCreated (SfxAllItemSet aSet) //add CHINA001
{
SFX_ITEMSET_ARG (&aSet,pModeItem,SfxAllEnumItem,SID_ENUM_PAGE_MODE,sal_False);
SFX_ITEMSET_ARG (&aSet,pPaperStartItem,SfxAllEnumItem,SID_PAPER_START,sal_False);
SFX_ITEMSET_ARG (&aSet,pPaperEndItem,SfxAllEnumItem,SID_PAPER_END,sal_False);
SFX_ITEMSET_ARG (&aSet,pCollectListItem,SfxStringListItem,SID_COLLECT_LIST,sal_False);
if (pModeItem)
SetMode((SvxModeType)pModeItem->GetEnumValue());
if (pPaperStartItem && pPaperEndItem)
SetPaperFormatRanges( (SvxPaper)pPaperStartItem->GetEnumValue(), (SvxPaper)pPaperEndItem->GetEnumValue() );
if (pCollectListItem)
SetCollectionList(pCollectListItem->GetList());
}