/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include // is used for Invalidate -> maintain it as well static const sal_uInt16 DatabaseSlotMap[] = { SID_FM_RECORD_FIRST, SID_FM_RECORD_NEXT, SID_FM_RECORD_PREV, SID_FM_RECORD_LAST, SID_FM_RECORD_NEW, SID_FM_RECORD_DELETE, SID_FM_RECORD_ABSOLUTE, SID_FM_RECORD_TOTAL, SID_FM_RECORD_SAVE, SID_FM_RECORD_UNDO, SID_FM_REMOVE_FILTER_SORT, SID_FM_SORTUP, SID_FM_SORTDOWN, SID_FM_ORDERCRIT, SID_FM_AUTOFILTER, SID_FM_FORM_FILTERED, SID_FM_REFRESH, SID_FM_REFRESH_FORM_CONTROL, SID_FM_SEARCH, SID_FM_FILTER_START, SID_FM_VIEW_AS_GRID, 0 }; // is used for Invalidate -> maintain it as well // sort ascending !!!!!! static const sal_Int16 DlgSlotMap[] = // slots of the controller { SID_FM_CTL_PROPERTIES, SID_FM_PROPERTIES, SID_FM_TAB_DIALOG, SID_FM_ADD_FIELD, SID_FM_SHOW_FMEXPLORER, SID_FM_FIELDS_CONTROL, SID_FM_SHOW_PROPERTIES, SID_FM_PROPERTY_CONTROL, SID_FM_FMEXPLORER_CONTROL, SID_FM_SHOW_DATANAVIGATOR, SID_FM_DATANAVIGATOR_CONTROL, 0 }; static const sal_Int16 SelObjectSlotMap[] = // slots depending on the SelObject { SID_FM_CONVERTTO_EDIT, SID_FM_CONVERTTO_BUTTON, SID_FM_CONVERTTO_FIXEDTEXT, SID_FM_CONVERTTO_LISTBOX, SID_FM_CONVERTTO_CHECKBOX, SID_FM_CONVERTTO_RADIOBUTTON, SID_FM_CONVERTTO_GROUPBOX, SID_FM_CONVERTTO_COMBOBOX, SID_FM_CONVERTTO_IMAGEBUTTON, SID_FM_CONVERTTO_FILECONTROL, SID_FM_CONVERTTO_DATE, SID_FM_CONVERTTO_TIME, SID_FM_CONVERTTO_NUMERIC, SID_FM_CONVERTTO_CURRENCY, SID_FM_CONVERTTO_PATTERN, SID_FM_CONVERTTO_IMAGECONTROL, SID_FM_CONVERTTO_FORMATTED, SID_FM_CONVERTTO_SCROLLBAR, SID_FM_CONVERTTO_SPINBUTTON, SID_FM_CONVERTTO_NAVIGATIONBAR, SID_FM_FMEXPLORER_CONTROL, SID_FM_DATANAVIGATOR_CONTROL, 0 }; // the following arrays must be consistent, i.e., corresponding entries should // be at the same relative position within their respective arrays static const char* aConvertSlots[] = { "ConvertToEdit", "ConvertToButton", "ConvertToFixed", "ConvertToList", "ConvertToCheckBox", "ConvertToRadio", "ConvertToGroup", "ConvertToCombo", "ConvertToImageBtn", "ConvertToFileControl", "ConvertToDate", "ConvertToTime", "ConvertToNumeric", "ConvertToCurrency", "ConvertToPattern", "ConvertToImageControl", "ConvertToFormatted", "ConvertToScrollBar", "ConvertToSpinButton", "ConvertToNavigationBar" }; static const OUStringLiteral aImgIds[] = { RID_SVXBMP_EDITBOX, RID_SVXBMP_BUTTON, RID_SVXBMP_FIXEDTEXT, RID_SVXBMP_LISTBOX, RID_SVXBMP_CHECKBOX, RID_SVXBMP_RADIOBUTTON, RID_SVXBMP_GROUPBOX, RID_SVXBMP_COMBOBOX, RID_SVXBMP_IMAGEBUTTON, RID_SVXBMP_FILECONTROL, RID_SVXBMP_DATEFIELD, RID_SVXBMP_TIMEFIELD, RID_SVXBMP_NUMERICFIELD, RID_SVXBMP_CURRENCYFIELD, RID_SVXBMP_PATTERNFIELD, RID_SVXBMP_IMAGECONTROL, RID_SVXBMP_FORMATTEDFIELD, RID_SVXBMP_SCROLLBAR, RID_SVXBMP_SPINBUTTON, RID_SVXBMP_NAVIGATIONBAR }; static const sal_Int16 nObjectTypes[] = { OBJ_FM_EDIT, OBJ_FM_BUTTON, OBJ_FM_FIXEDTEXT, OBJ_FM_LISTBOX, OBJ_FM_CHECKBOX, OBJ_FM_RADIOBUTTON, OBJ_FM_GROUPBOX, OBJ_FM_COMBOBOX, OBJ_FM_IMAGEBUTTON, OBJ_FM_FILECONTROL, OBJ_FM_DATEFIELD, OBJ_FM_TIMEFIELD, OBJ_FM_NUMERICFIELD, OBJ_FM_CURRENCYFIELD, OBJ_FM_PATTERNFIELD, OBJ_FM_IMAGECONTROL, OBJ_FM_FORMATTEDFIELD, OBJ_FM_SCROLLBAR, OBJ_FM_SPINBUTTON, OBJ_FM_NAVIGATIONBAR }; using namespace ::com::sun::star; using namespace ::com::sun::star::ui; using namespace ::com::sun::star::uno; using namespace ::com::sun::star::sdb; using namespace ::com::sun::star::sdbc; using namespace ::com::sun::star::sdbcx; using namespace ::com::sun::star::beans; using namespace ::com::sun::star::container; using namespace ::com::sun::star::form; using namespace ::com::sun::star::form::binding; using namespace ::com::sun::star::form::runtime; using namespace ::com::sun::star::awt; using namespace ::com::sun::star::view; using namespace ::com::sun::star::util; using namespace ::com::sun::star::script; using namespace ::svxform; using namespace ::svx; using namespace ::dbtools; //= helper namespace { void collectInterfacesFromMarkList( const SdrMarkList& _rMarkList, InterfaceBag& /* [out] */ _rInterfaces ) { _rInterfaces.clear(); const size_t nMarkCount = _rMarkList.GetMarkCount(); for ( size_t i = 0; i < nMarkCount; ++i) { SdrObject* pCurrent = _rMarkList.GetMark( i )->GetMarkedSdrObj(); std::unique_ptr pGroupIterator; if ( pCurrent->IsGroupObject() ) { pGroupIterator.reset(new SdrObjListIter( pCurrent->GetSubList() )); pCurrent = pGroupIterator->IsMore() ? pGroupIterator->Next() : nullptr; } while ( pCurrent ) { FmFormObj* pAsFormObject = FmFormObj::GetFormObject( pCurrent ); // note this will de-reference virtual objects, if necessary/possible if ( pAsFormObject ) { Reference< XInterface > xControlModel( pAsFormObject->GetUnoControlModel(), UNO_QUERY ); // the UNO_QUERY is important for normalization if ( xControlModel.is() ) _rInterfaces.insert( xControlModel ); } // next element pCurrent = pGroupIterator && pGroupIterator->IsMore() ? pGroupIterator->Next() : nullptr; } } } sal_Int32 GridView2ModelPos(const Reference< XIndexAccess>& rColumns, sal_Int16 nViewPos) { try { if (rColumns.is()) { // loop through all columns sal_Int32 i; Reference< XPropertySet> xCur; for (i=0; igetCount(); ++i) { rColumns->getByIndex(i) >>= xCur; if (!::comphelper::getBOOL(xCur->getPropertyValue(FM_PROP_HIDDEN))) { // for every visible col : if nViewPos is greater zero, decrement it, else we // have found the model position if (!nViewPos) break; else --nViewPos; } } if (igetCount()) return i; } } catch(const Exception&) { DBG_UNHANDLED_EXCEPTION("svx"); } return -1; } void TransferEventScripts(const Reference< XControlModel>& xModel, const Reference< XControl>& xControl, const Sequence< ScriptEventDescriptor>& rTransferIfAvailable) { // first check if we have a XEventAttacherManager for the model Reference< XChild> xModelChild(xModel, UNO_QUERY); if (!xModelChild.is()) return; // nothing to do Reference< XEventAttacherManager> xEventManager(xModelChild->getParent(), UNO_QUERY); if (!xEventManager.is()) return; // nothing to do if (!rTransferIfAvailable.hasElements()) return; // nothing to do // check for the index of the model within its parent Reference< XIndexAccess> xParentIndex(xModelChild->getParent(), UNO_QUERY); if (!xParentIndex.is()) return; // nothing to do sal_Int32 nIndex = getElementPos(xParentIndex, xModel); if (nIndex<0 || nIndex>=xParentIndex->getCount()) return; // nothing to do // then we need information about the listeners supported by the control and the model Sequence< Type> aModelListeners; Sequence< Type> aControlListeners; Reference< XIntrospection> xIntrospection = theIntrospection::get(::comphelper::getProcessComponentContext()); if (xModel.is()) { Any aModel(makeAny(xModel)); aModelListeners = xIntrospection->inspect(aModel)->getSupportedListeners(); } if (xControl.is()) { Any aControl(makeAny(xControl)); aControlListeners = xIntrospection->inspect(aControl)->getSupportedListeners(); } sal_Int32 nMaxNewLen = aModelListeners.getLength() + aControlListeners.getLength(); if (!nMaxNewLen) return; // the model and the listener don't support any listeners (or we were unable to retrieve these infos) Sequence< ScriptEventDescriptor> aTransferable(nMaxNewLen); ScriptEventDescriptor* pTransferable = aTransferable.getArray(); const ScriptEventDescriptor* pCurrent = rTransferIfAvailable.getConstArray(); sal_Int32 i,j,k; for (i=0; i* pCurrentArray = &aModelListeners; pCurrentArray; pCurrentArray = (pCurrentArray == &aModelListeners) ? &aControlListeners : nullptr ) { const Type* pCurrentListeners = pCurrentArray->getConstArray(); for (j=0; jgetLength(); ++j, ++pCurrentListeners) { OUString aListener = (*pCurrentListeners).getTypeName(); if (!aListener.isEmpty()) aListener = aListener.copy(aListener.lastIndexOf('.')+1); if (aListener == pCurrent->ListenerType) // the current ScriptEventDescriptor doesn't match the current listeners class continue; // now check the methods Sequence< OUString> aMethodsNames = ::comphelper::getEventMethodsForType(*pCurrentListeners); const OUString* pMethodsNames = aMethodsNames.getConstArray(); for (k=0; kEventMethod) // the current ScriptEventDescriptor doesn't match the current listeners current method continue; // we can transfer the script event : the model (control) supports it *pTransferable = *pCurrent; ++pTransferable; break; } if (kregisterScriptEvents(nIndex, aTransferable); } OUString getServiceNameByControlType(sal_Int16 nType) { switch (nType) { case OBJ_FM_EDIT : return OUString(FM_COMPONENT_TEXTFIELD); case OBJ_FM_BUTTON : return OUString(FM_COMPONENT_COMMANDBUTTON); case OBJ_FM_FIXEDTEXT : return OUString(FM_COMPONENT_FIXEDTEXT); case OBJ_FM_LISTBOX : return OUString(FM_COMPONENT_LISTBOX); case OBJ_FM_CHECKBOX : return OUString(FM_COMPONENT_CHECKBOX); case OBJ_FM_RADIOBUTTON : return OUString(FM_COMPONENT_RADIOBUTTON); case OBJ_FM_GROUPBOX : return OUString(FM_COMPONENT_GROUPBOX); case OBJ_FM_COMBOBOX : return OUString(FM_COMPONENT_COMBOBOX); case OBJ_FM_GRID : return OUString(FM_COMPONENT_GRIDCONTROL); case OBJ_FM_IMAGEBUTTON : return OUString(FM_COMPONENT_IMAGEBUTTON); case OBJ_FM_FILECONTROL : return OUString(FM_COMPONENT_FILECONTROL); case OBJ_FM_DATEFIELD : return OUString(FM_COMPONENT_DATEFIELD); case OBJ_FM_TIMEFIELD : return OUString(FM_COMPONENT_TIMEFIELD); case OBJ_FM_NUMERICFIELD : return OUString(FM_COMPONENT_NUMERICFIELD); case OBJ_FM_CURRENCYFIELD : return OUString(FM_COMPONENT_CURRENCYFIELD); case OBJ_FM_PATTERNFIELD : return OUString(FM_COMPONENT_PATTERNFIELD); case OBJ_FM_HIDDEN : return OUString(FM_COMPONENT_HIDDENCONTROL); case OBJ_FM_IMAGECONTROL : return OUString(FM_COMPONENT_IMAGECONTROL); case OBJ_FM_FORMATTEDFIELD : return OUString(FM_COMPONENT_FORMATTEDFIELD); case OBJ_FM_SCROLLBAR : return OUString(FM_SUN_COMPONENT_SCROLLBAR); case OBJ_FM_SPINBUTTON : return OUString(FM_SUN_COMPONENT_SPINBUTTON); case OBJ_FM_NAVIGATIONBAR : return OUString(FM_SUN_COMPONENT_NAVIGATIONBAR); } return OUString(); } } // check if the control has one of the interfaces we can use for searching // *_pCurrentText will be filled with the current text of the control (as used when searching this control) bool IsSearchableControl( const css::uno::Reference< css::uno::XInterface>& _rxControl, OUString* _pCurrentText ) { if ( !_rxControl.is() ) return false; Reference< XTextComponent > xAsText( _rxControl, UNO_QUERY ); if ( xAsText.is() ) { if ( _pCurrentText ) *_pCurrentText = xAsText->getText(); return true; } Reference< XListBox > xListBox( _rxControl, UNO_QUERY ); if ( xListBox.is() ) { if ( _pCurrentText ) *_pCurrentText = xListBox->getSelectedItem(); return true; } Reference< XCheckBox > xCheckBox( _rxControl, UNO_QUERY ); if ( xCheckBox.is() ) { if ( _pCurrentText ) { switch ( static_cast<::TriState>(xCheckBox->getState()) ) { case TRISTATE_FALSE: *_pCurrentText = "0"; break; case TRISTATE_TRUE: *_pCurrentText = "1"; break; default: _pCurrentText->clear(); break; } } return true; } return false; } bool FmXBoundFormFieldIterator::ShouldStepInto(const Reference< XInterface>& _rContainer) const { if (_rContainer == m_xStartingPoint) // would be quite stupid to step over the root .... return true; return Reference< XControlModel>(_rContainer, UNO_QUERY).is(); } bool FmXBoundFormFieldIterator::ShouldHandleElement(const Reference< XInterface>& _rElement) { if (!_rElement.is()) // NULL element return false; if (Reference< XForm>(_rElement, UNO_QUERY).is() || Reference< XGrid>(_rElement, UNO_QUERY).is()) // a forms or a grid return false; Reference< XPropertySet> xSet(_rElement, UNO_QUERY); if (!xSet.is() || !::comphelper::hasProperty(FM_PROP_BOUNDFIELD, xSet)) // no "BoundField" property return false; Any aVal( xSet->getPropertyValue(FM_PROP_BOUNDFIELD) ); if (aVal.getValueTypeClass() != TypeClass_INTERFACE) // void or invalid property value return false; return aVal.hasValue(); } static bool isControlList(const SdrMarkList& rMarkList) { // the list contains only controls and at least one control const size_t nMarkCount = rMarkList.GetMarkCount(); bool bControlList = nMarkCount != 0; bool bHadAnyLeafs = false; for (size_t i = 0; i < nMarkCount && bControlList; ++i) { SdrObject *pObj = rMarkList.GetMark(i)->GetMarkedSdrObj(); E3dObject* pAs3DObject = dynamic_cast< E3dObject* >( pObj); // E3dObject's do not contain any 2D-objects (by definition) // we need this extra check here : an E3dObject->IsGroupObject says "YES", but an SdrObjListIter working // with an E3dObject doesn't give me any Nodes (E3dObject has a sub list, but no members in that list, // cause there implementation differs from the one of "normal" SdrObject's. Unfortunally SdrObject::IsGroupObject // doesn't check the element count of the sub list, which is simply a bug in IsGroupObject we can't fix at the moment). // So at the end of this function bControlList would have the same value it was initialized with above : sal_True // And this would be wrong :) // 03.02.00 - 72529 - FS if (!pAs3DObject) { if (pObj->IsGroupObject()) { SdrObjListIter aIter(pObj->GetSubList()); while (aIter.IsMore() && bControlList) { bControlList = SdrInventor::FmForm == aIter.Next()->GetObjInventor(); bHadAnyLeafs = true; } } else { bHadAnyLeafs = true; bControlList = SdrInventor::FmForm == pObj->GetObjInventor(); } } } return bControlList && bHadAnyLeafs; } static Reference< XForm > GetForm(const Reference< XInterface>& _rxElement) { Reference< XForm > xForm( _rxElement, UNO_QUERY ); if ( xForm.is() ) return xForm; Reference< XChild > xChild( _rxElement, UNO_QUERY ); if ( xChild.is() ) return GetForm( xChild->getParent() ); return Reference< XForm >(); } FmXFormShell_Base_Disambiguation::FmXFormShell_Base_Disambiguation( ::osl::Mutex& _rMutex ) :FmXFormShell_BD_BASE( _rMutex ) { } FmXFormShell::FmXFormShell( FmFormShell& _rShell, SfxViewFrame* _pViewFrame ) :FmXFormShell_BASE(m_aMutex) ,FmXFormShell_CFGBASE("Office.Common/Misc", ConfigItemMode::NONE) ,m_eNavigate( NavigationBarMode_NONE ) ,m_nInvalidationEvent( nullptr ) ,m_nActivationEvent( nullptr ) ,m_pShell( &_rShell ) ,m_pTextShell( new svx::FmTextControlShell( _pViewFrame ) ) ,m_aActiveControllerFeatures( this ) ,m_aNavControllerFeatures( this ) ,m_eDocumentType( eUnknownDocumentType ) ,m_nLockSlotInvalidation( 0 ) ,m_bHadPropertyBrowserInDesignMode( false ) ,m_bTrackProperties( true ) ,m_bUseWizards( true ) ,m_bDatabaseBar( false ) ,m_bInActivate( false ) ,m_bSetFocus( false ) ,m_bFilterMode( false ) ,m_bChangingDesignMode( false ) ,m_bPreparedClose( false ) ,m_bFirstActivation( true ) { m_aMarkTimer.SetTimeout(100); m_aMarkTimer.SetInvokeHandler(LINK(this, FmXFormShell, OnTimeOut_Lock)); m_aMarkTimer.SetDebugName("svx::FmXFormShell m_aMarkTimer"); m_xAttachedFrame = _pViewFrame->GetFrame().GetFrameInterface(); // to prevent deletion of this we acquire our refcounter once osl_atomic_increment(&m_refCount); // correct the refcounter osl_atomic_decrement(&m_refCount); // cache the current configuration settings we're interested in implAdjustConfigCache_Lock(); // and register for changes on this settings Sequence< OUString > aNames { "FormControlPilotsEnabled" }; EnableNotification(aNames); } FmXFormShell::~FmXFormShell() { } Reference< css::frame::XModel > FmXFormShell::getContextDocument_Lock() const { Reference< css::frame::XModel > xModel; // determine the type of document we live in try { Reference< css::frame::XController > xController; if ( m_xAttachedFrame.is() ) xController = m_xAttachedFrame->getController(); if ( xController.is() ) xModel = xController->getModel(); } catch( const Exception& ) { DBG_UNHANDLED_EXCEPTION("svx"); } return xModel; } bool FmXFormShell::isEnhancedForm_Lock() const { return getDocumentType_Lock() == eEnhancedForm; } bool FmXFormShell::impl_checkDisposed_Lock() const { DBG_TESTSOLARMUTEX(); if ( !m_pShell ) { OSL_FAIL( "FmXFormShell::impl_checkDisposed: already disposed!" ); return true; } return false; } ::svxform::DocumentType FmXFormShell::getDocumentType_Lock() const { if ( m_eDocumentType != eUnknownDocumentType ) return m_eDocumentType; // determine the type of document we live in Reference xModel = getContextDocument_Lock(); if ( xModel.is() ) m_eDocumentType = DocumentClassification::classifyDocument( xModel ); else { OSL_FAIL( "FmXFormShell::getDocumentType: can't determine the document type!" ); m_eDocumentType = eTextDocument; // fallback, just to have a defined state } return m_eDocumentType; } bool FmXFormShell::IsReadonlyDoc_Lock() const { if (impl_checkDisposed_Lock()) return true; FmFormModel* pModel = m_pShell->GetFormModel(); if ( pModel && pModel->GetObjectShell() ) return pModel->GetObjectShell()->IsReadOnly() || pModel->GetObjectShell()->IsReadOnlyUI(); return true; } // EventListener void SAL_CALL FmXFormShell::disposing(const lang::EventObject& e) { SolarMutexGuard g; if (m_xActiveController == e.Source) { // the controller will release, then release everything stopListening_Lock(); m_xActiveForm = nullptr; m_xActiveController = nullptr; m_xNavigationController = nullptr; m_aActiveControllerFeatures.dispose(); m_aNavControllerFeatures.dispose(); if ( m_pShell ) m_pShell->GetViewShell()->GetViewFrame()->GetBindings().InvalidateShell(*m_pShell); } if (e.Source == m_xExternalViewController) { Reference< runtime::XFormController > xFormController( m_xExternalViewController, UNO_QUERY ); OSL_ENSURE( xFormController.is(), "FmXFormShell::disposing: invalid external view controller!" ); if (xFormController.is()) xFormController->removeActivateListener(static_cast(this)); Reference< css::lang::XComponent> xComp(m_xExternalViewController, UNO_QUERY); if (xComp.is()) xComp->removeEventListener(static_cast(static_cast(this))); m_xExternalViewController = nullptr; m_xExternalDisplayedForm = nullptr; m_xExtViewTriggerController = nullptr; InvalidateSlot_Lock( SID_FM_VIEW_AS_GRID, false ); } } void SAL_CALL FmXFormShell::propertyChange(const PropertyChangeEvent& evt) { SolarMutexGuard g; if (impl_checkDisposed_Lock()) return; if (evt.PropertyName == FM_PROP_ROWCOUNT) { // The update following this forces a re-painting of the corresponding // slots. But if I am not in the MainThread of the application (because, // for example, a cursor is counting data sets at the moment and always // gives me this PropertyChanges), this can clash with normal paints in // the MainThread of the application. (Such paints happen, for example, // if one simply places another application over the office and switches // back again). // Therefore the use of the SolarMutex, which safeguards that. comphelper::SolarMutex& rSolarSafety = Application::GetSolarMutex(); if (rSolarSafety.tryToAcquire()) { m_pShell->GetViewShell()->GetViewFrame()->GetBindings().Invalidate(SID_FM_RECORD_TOTAL, true); m_pShell->GetViewShell()->GetViewFrame()->GetBindings().Update(SID_FM_RECORD_TOTAL); rSolarSafety.release(); } else { // with the following the slot is invalidated asynchron LockSlotInvalidation_Lock(true); InvalidateSlot_Lock(SID_FM_RECORD_TOTAL, false); LockSlotInvalidation_Lock(false); } } // this may be called from a non-main-thread so invalidate the shell asynchronously LockSlotInvalidation_Lock(true); InvalidateSlot_Lock(0, false); // special meaning : invalidate m_pShell LockSlotInvalidation_Lock(false); } void FmXFormShell::invalidateFeatures( const ::std::vector< sal_Int32 >& _rFeatures ) { SolarMutexGuard g; if (impl_checkDisposed_Lock()) return; OSL_ENSURE( !_rFeatures.empty(), "FmXFormShell::invalidateFeatures: invalid arguments!" ); if ( m_pShell->GetViewShell() && m_pShell->GetViewShell()->GetViewFrame() ) { // unfortunately, SFX requires sal_uInt16 ::std::vector< sal_uInt16 > aSlotIds; aSlotIds.reserve( _rFeatures.size() ); ::std::copy( _rFeatures.begin(), _rFeatures.end(), ::std::insert_iterator< ::std::vector< sal_uInt16 > >( aSlotIds, aSlotIds.begin() ) ); // furthermore, SFX wants a terminating 0 aSlotIds.push_back( 0 ); // and, last but not least, SFX wants the ids to be sorted ::std::sort( aSlotIds.begin(), aSlotIds.end() - 1 ); sal_uInt16 *pSlotIds = &(aSlotIds[0]); m_pShell->GetViewShell()->GetViewFrame()->GetBindings().Invalidate( pSlotIds ); } } void SAL_CALL FmXFormShell::formActivated(const lang::EventObject& rEvent) { SolarMutexGuard g; if (impl_checkDisposed_Lock()) return; Reference< runtime::XFormController > xController( rEvent.Source, UNO_QUERY_THROW ); m_pTextShell->formActivated( xController ); setActiveController_Lock(xController); } void SAL_CALL FmXFormShell::formDeactivated(const lang::EventObject& rEvent) { SolarMutexGuard g; if (impl_checkDisposed_Lock()) return; Reference< runtime::XFormController > xController( rEvent.Source, UNO_QUERY_THROW ); m_pTextShell->formDeactivated( xController ); } void FmXFormShell::disposing() { SolarMutexGuard g; FmXFormShell_BASE::disposing(); if ( m_pShell && !m_pShell->IsDesignMode() ) setActiveController_Lock(nullptr, true); // do NOT save the content of the old form (the second parameter tells this) // if we're here, then we expect that PrepareClose has been called, and thus the user // got a chance to commit or reject any changes. So in case we're here and there // are still uncommitted changes, the user explicitly wanted this. m_pTextShell->dispose(); m_xAttachedFrame = nullptr; CloseExternalFormViewer_Lock(); while ( !m_aLoadingPages.empty() ) { Application::RemoveUserEvent( m_aLoadingPages.front().nEventId ); m_aLoadingPages.pop(); } { if (m_nInvalidationEvent) { Application::RemoveUserEvent(m_nInvalidationEvent); m_nInvalidationEvent = nullptr; } if ( m_nActivationEvent ) { Application::RemoveUserEvent( m_nActivationEvent ); m_nActivationEvent = nullptr; } } { DBG_ASSERT(!m_nInvalidationEvent, "FmXFormShell::~FmXFormShell : still have an invalidation event !"); // should have been deleted while being disposed m_aMarkTimer.Stop(); } DisableNotification(); RemoveElement_Lock(m_xForms); m_xForms.clear(); impl_switchActiveControllerListening_Lock(false); m_xActiveController = nullptr; m_xActiveForm = nullptr; m_pShell = nullptr; m_xNavigationController = nullptr; m_xCurrentForm = nullptr; m_xLastGridFound = nullptr; m_xAttachedFrame = nullptr; m_xExternalViewController = nullptr; m_xExtViewTriggerController = nullptr; m_xExternalDisplayedForm = nullptr; InterfaceBag aEmpty; m_aCurrentSelection.swap( aEmpty ); m_aActiveControllerFeatures.dispose(); m_aNavControllerFeatures.dispose(); } void FmXFormShell::UpdateSlot_Lock(sal_Int16 _nId) { if (impl_checkDisposed_Lock()) return; if ( m_nLockSlotInvalidation ) { OSL_FAIL( "FmXFormShell::UpdateSlot: cannot update if invalidation is currently locked!" ); InvalidateSlot_Lock(_nId, false); } else { OSL_ENSURE( _nId, "FmXFormShell::UpdateSlot: can't update the complete shell!" ); m_pShell->GetViewShell()->GetViewFrame()->GetBindings().Invalidate( _nId, true, true ); m_pShell->GetViewShell()->GetViewFrame()->GetBindings().Update( _nId ); } } void FmXFormShell::InvalidateSlot_Lock(sal_Int16 nId, bool bWithId) { if (impl_checkDisposed_Lock()) return; if (m_nLockSlotInvalidation) { sal_uInt8 nFlags = ( bWithId ? 0x01 : 0 ); m_arrInvalidSlots.emplace_back(nId, nFlags ); } else if (nId) m_pShell->GetViewShell()->GetViewFrame()->GetBindings().Invalidate(nId, true, bWithId); else m_pShell->GetViewShell()->GetViewFrame()->GetBindings().InvalidateShell(*m_pShell); } void FmXFormShell::LockSlotInvalidation_Lock(bool bLock) { if (impl_checkDisposed_Lock()) return; DBG_ASSERT(bLock || m_nLockSlotInvalidation>0, "FmXFormShell::LockSlotInvalidation : invalid call !"); if (bLock) ++m_nLockSlotInvalidation; else if (!--m_nLockSlotInvalidation) { // (asynchronously) invalidate everything accumulated during the locked phase if (!m_nInvalidationEvent) m_nInvalidationEvent = Application::PostUserEvent(LINK(this, FmXFormShell, OnInvalidateSlots_Lock)); } } IMPL_LINK_NOARG(FmXFormShell, OnInvalidateSlots_Lock, void*,void) { if (impl_checkDisposed_Lock()) return; m_nInvalidationEvent = nullptr; for (const auto& rInvalidSlot : m_arrInvalidSlots) { if (rInvalidSlot.id) m_pShell->GetViewShell()->GetViewFrame()->GetBindings().Invalidate(rInvalidSlot.id, true, (rInvalidSlot.flags & 0x01)); else m_pShell->GetViewShell()->GetViewFrame()->GetBindings().InvalidateShell(*m_pShell); } m_arrInvalidSlots.clear(); } void FmXFormShell::ForceUpdateSelection_Lock() { if (impl_checkDisposed_Lock()) return; if (IsSelectionUpdatePending_Lock()) { m_aMarkTimer.Stop(); // optionally turn off the invalidation of slots which is implicitly done by SetSelection LockSlotInvalidation_Lock(true); SetSelection_Lock(m_pShell->GetFormView()->GetMarkedObjectList()); LockSlotInvalidation_Lock(false); } } std::unique_ptr FmXFormShell::GetConversionMenu_Lock() { std::unique_ptr pBuilder(new VclBuilder(nullptr, VclBuilderContainer::getUIRootDir(), "svx/ui/convertmenu.ui", "")); VclPtr pNewMenu(pBuilder->get_menu("menu")); for (size_t i = 0; i < SAL_N_ELEMENTS(aConvertSlots); ++i) { // the corresponding image at it pNewMenu->SetItemImage(pNewMenu->GetItemId(aConvertSlots[i]), Image(StockImage::Yes, aImgIds[i])); } return pBuilder; } OString FmXFormShell::SlotToIdent(sal_uInt16 nSlot) { assert(SAL_N_ELEMENTS(SelObjectSlotMap) >= SAL_N_ELEMENTS(aConvertSlots)); for (size_t i = 0; i < SAL_N_ELEMENTS(aConvertSlots); ++i) { if (nSlot == SelObjectSlotMap[i]) return aConvertSlots[i]; } return OString(); } bool FmXFormShell::isControlConversionSlot(const OString& rIdent) { for (const auto& rConvertSlot : aConvertSlots) if (rIdent == rConvertSlot) return true; return false; } void FmXFormShell::executeControlConversionSlot_Lock(const OString &rIdent) { OSL_PRECOND( canConvertCurrentSelectionToControl_Lock(rIdent), "FmXFormShell::executeControlConversionSlot: illegal call!" ); InterfaceBag::const_iterator aSelectedElement = m_aCurrentSelection.begin(); if ( aSelectedElement == m_aCurrentSelection.end() ) return; executeControlConversionSlot_Lock(Reference(*aSelectedElement, UNO_QUERY), rIdent); } bool FmXFormShell::executeControlConversionSlot_Lock(const Reference& _rxObject, const OString& rIdent) { if (impl_checkDisposed_Lock()) return false; OSL_ENSURE( _rxObject.is(), "FmXFormShell::executeControlConversionSlot: invalid object!" ); if ( !_rxObject.is() ) return false; SdrPage* pPage = m_pShell->GetCurPage(); FmFormPage* pFormPage = dynamic_cast< FmFormPage* >( pPage ); OSL_ENSURE( pFormPage, "FmXFormShell::executeControlConversionSlot: no current (form) page!" ); if ( !pFormPage ) return false; OSL_ENSURE( isSolelySelected_Lock(_rxObject), "FmXFormShell::executeControlConversionSlot: hmm ... shouldn't this parameter be redundant?" ); for (size_t lookupSlot = 0; lookupSlot < SAL_N_ELEMENTS(aConvertSlots); ++lookupSlot) { if (rIdent == aConvertSlots[lookupSlot]) { Reference< XInterface > xNormalizedObject( _rxObject, UNO_QUERY ); FmFormObj* pFormObject = nullptr; SdrObjListIter aPageIter( pFormPage ); while ( aPageIter.IsMore() ) { SdrObject* pCurrent = aPageIter.Next(); pFormObject = FmFormObj::GetFormObject( pCurrent ); if ( !pFormObject ) continue; Reference< XInterface > xCurrentNormalized( pFormObject->GetUnoControlModel(), UNO_QUERY ); if ( xCurrentNormalized.get() == xNormalizedObject.get() ) break; pFormObject = nullptr; } if ( !pFormObject ) return false; OUString sNewName( getServiceNameByControlType( nObjectTypes[ lookupSlot ] ) ); Reference xContext = comphelper::getProcessComponentContext(); Reference< XControlModel> xNewModel( xContext->getServiceManager()->createInstanceWithContext(sNewName, xContext), UNO_QUERY ); if (!xNewModel.is()) return false; Reference< XControlModel> xOldModel( pFormObject->GetUnoControlModel() ); // transfer properties Reference< XPropertySet> xOldSet(xOldModel, UNO_QUERY); Reference< XPropertySet> xNewSet(xNewModel, UNO_QUERY); lang::Locale aNewLanguage = Application::GetSettings().GetUILanguageTag().getLocale(); TransferFormComponentProperties(xOldSet, xNewSet, aNewLanguage); Sequence< css::script::ScriptEventDescriptor> aOldScripts; Reference< XChild> xChild(xOldModel, UNO_QUERY); if (xChild.is()) { Reference< XIndexAccess> xParent(xChild->getParent(), UNO_QUERY); // remember old script events Reference< css::script::XEventAttacherManager> xEvManager(xChild->getParent(), UNO_QUERY); if (xParent.is() && xEvManager.is()) { sal_Int32 nIndex = getElementPos(xParent, xOldModel); if (nIndex>=0 && nIndexgetCount()) aOldScripts = xEvManager->getScriptEvents(nIndex); } // replace the model within the parent container Reference< XIndexContainer> xIndexParent(xChild->getParent(), UNO_QUERY); if (xIndexParent.is()) { // the form container works with FormComponents Reference< XFormComponent> xComponent(xNewModel, UNO_QUERY); DBG_ASSERT(xComponent.is(), "FmXFormShell::executeControlConversionSlot: the new model is no form component !"); Any aNewModel(makeAny(xComponent)); try { sal_Int32 nIndex = getElementPos(xParent, xOldModel); if (nIndex>=0 && nIndexgetCount()) xIndexParent->replaceByIndex(nIndex, aNewModel); else { OSL_FAIL("FmXFormShell::executeControlConversionSlot: could not replace the model !"); Reference< css::lang::XComponent> xNewComponent(xNewModel, UNO_QUERY); if (xNewComponent.is()) xNewComponent->dispose(); return false; } } catch(Exception&) { OSL_FAIL("FmXFormShell::executeControlConversionSlot: could not replace the model !"); Reference< css::lang::XComponent> xNewComponent(xNewModel, UNO_QUERY); if (xNewComponent.is()) xNewComponent->dispose(); return false; } } } // special handling for the LabelControl-property : can only be set when the model is placed // within the forms hierarchy if (::comphelper::hasProperty(FM_PROP_CONTROLLABEL, xOldSet) && ::comphelper::hasProperty(FM_PROP_CONTROLLABEL, xNewSet)) { try { xNewSet->setPropertyValue(FM_PROP_CONTROLLABEL, xOldSet->getPropertyValue(FM_PROP_CONTROLLABEL)); } catch(Exception&) { } } // set new model pFormObject->SetChanged(); pFormObject->SetUnoControlModel(xNewModel); // transfer script events // (do this _after_ SetUnoControlModel as we need the new (implicitly created) control) if (aOldScripts.hasElements()) { // find the control for the model Reference xControlContainer(getControlContainerForView_Lock()); Sequence< Reference< XControl> > aControls( xControlContainer->getControls() ); const Reference< XControl>* pControls = aControls.getConstArray(); sal_uInt32 nLen = aControls.getLength(); Reference< XControl> xControl; for (sal_uInt32 i=0 ; igetModel() == xNewModel) { xControl = pControls[i]; break; } } TransferEventScripts(xNewModel, xControl, aOldScripts); } // transfer value bindings, if possible { Reference< XBindableValue > xOldBindable( xOldModel, UNO_QUERY ); Reference< XBindableValue > xNewBindable( xNewModel, UNO_QUERY ); if ( xOldBindable.is() ) { try { if ( xNewBindable.is() ) xNewBindable->setValueBinding( xOldBindable->getValueBinding() ); xOldBindable->setValueBinding( nullptr ); } catch(const Exception&) { DBG_UNHANDLED_EXCEPTION("svx"); } } } // same for list entry sources { Reference< XListEntrySink > xOldSink( xOldModel, UNO_QUERY ); Reference< XListEntrySink > xNewSink( xNewModel, UNO_QUERY ); if ( xOldSink.is() ) { try { if ( xNewSink.is() ) xNewSink->setListEntrySource( xOldSink->getListEntrySource() ); xOldSink->setListEntrySource( nullptr ); } catch(const Exception&) { DBG_UNHANDLED_EXCEPTION("svx"); } } } // create an undo action FmFormModel* pModel = m_pShell->GetFormModel(); DBG_ASSERT(pModel != nullptr, "FmXFormShell::executeControlConversionSlot: my shell has no model !"); if (pModel && pModel->IsUndoEnabled() ) { pModel->AddUndo(std::make_unique(*pModel, pFormObject, xOldModel)); } else { FmUndoModelReplaceAction::DisposeElement( xOldModel ); } return true; } } return false; } bool FmXFormShell::canConvertCurrentSelectionToControl_Lock(const OString& rIdent) { if ( m_aCurrentSelection.empty() ) return false; InterfaceBag::const_iterator aCheck = m_aCurrentSelection.begin(); Reference< lang::XServiceInfo > xElementInfo( *aCheck, UNO_QUERY ); if ( !xElementInfo.is() ) // no service info -> cannot determine this return false; if ( ++aCheck != m_aCurrentSelection.end() ) // more than one element return false; if ( Reference< XForm >::query( xElementInfo ).is() ) // it's a form return false; sal_Int16 nObjectType = getControlTypeByObject( xElementInfo ); if ( ( OBJ_FM_HIDDEN == nObjectType ) || ( OBJ_FM_CONTROL == nObjectType ) || ( OBJ_FM_GRID == nObjectType ) ) return false; // those types cannot be converted DBG_ASSERT(SAL_N_ELEMENTS(aConvertSlots) == SAL_N_ELEMENTS(nObjectTypes), "FmXFormShell::canConvertCurrentSelectionToControl: aConvertSlots & nObjectTypes must have the same size !"); for (size_t i = 0; i < SAL_N_ELEMENTS(aConvertSlots); ++i) if (rIdent == aConvertSlots[i]) return nObjectTypes[i] != nObjectType; return true; // all other slots: assume "yes" } void FmXFormShell::checkControlConversionSlotsForCurrentSelection_Lock(Menu& rMenu) { for (sal_uInt16 i = 0; i < rMenu.GetItemCount(); ++i) { // the context is already of a type that corresponds to the entry -> disable const sal_uInt16 nId = rMenu.GetItemId(i); rMenu.EnableItem(nId, canConvertCurrentSelectionToControl_Lock(rMenu.GetItemIdent(nId))); } } void FmXFormShell::LoopGrids_Lock(LoopGridsSync nSync, LoopGridsFlags nFlags) { if (impl_checkDisposed_Lock()) return; Reference< XIndexContainer> xControlModels(m_xActiveForm, UNO_QUERY); if (xControlModels.is()) { for (sal_Int32 i=0; igetCount(); ++i) { Reference< XPropertySet> xModelSet; xControlModels->getByIndex(i) >>= xModelSet; if (!xModelSet.is()) continue; if (!::comphelper::hasProperty(FM_PROP_CLASSID, xModelSet)) continue; sal_Int16 nClassId = ::comphelper::getINT16(xModelSet->getPropertyValue(FM_PROP_CLASSID)); if (FormComponentType::GRIDCONTROL != nClassId) continue; if (!::comphelper::hasProperty(FM_PROP_CURSORCOLOR, xModelSet) || !::comphelper::hasProperty(FM_PROP_ALWAYSSHOWCURSOR, xModelSet) || !::comphelper::hasProperty(FM_PROP_DISPLAYSYNCHRON, xModelSet)) continue; switch (nSync) { case LoopGridsSync::DISABLE_SYNC: { xModelSet->setPropertyValue(FM_PROP_DISPLAYSYNCHRON, Any(false)); } break; case LoopGridsSync::FORCE_SYNC: { Any aOldVal( xModelSet->getPropertyValue(FM_PROP_DISPLAYSYNCHRON) ); xModelSet->setPropertyValue(FM_PROP_DISPLAYSYNCHRON, Any(true)); xModelSet->setPropertyValue(FM_PROP_DISPLAYSYNCHRON, aOldVal); } break; case LoopGridsSync::ENABLE_SYNC: { xModelSet->setPropertyValue(FM_PROP_DISPLAYSYNCHRON, Any(true)); } break; } if (nFlags & LoopGridsFlags::DISABLE_ROCTRLR) { xModelSet->setPropertyValue(FM_PROP_ALWAYSSHOWCURSOR, Any(false)); Reference< XPropertyState> xModelPropState(xModelSet, UNO_QUERY); if (xModelPropState.is()) xModelPropState->setPropertyToDefault(FM_PROP_CURSORCOLOR); else xModelSet->setPropertyValue(FM_PROP_CURSORCOLOR, Any()); // this should be the default } } } } Reference< XControlContainer > FmXFormShell::getControlContainerForView_Lock() { if (impl_checkDisposed_Lock()) return nullptr; SdrPageView* pPageView = nullptr; if ( m_pShell && m_pShell->GetFormView() ) pPageView = m_pShell->GetFormView()->GetSdrPageView(); Reference< XControlContainer> xControlContainer; if ( pPageView ) xControlContainer = pPageView->GetPageWindow(0)->GetControlContainer(); return xControlContainer; } void FmXFormShell::ExecuteTabOrderDialog_Lock(const Reference& _rxForForm) { if (impl_checkDisposed_Lock()) return; OSL_PRECOND( _rxForForm.is(), "FmXFormShell::ExecuteTabOrderDialog: invalid tabbing model!" ); if ( !_rxForForm.is() ) return; try { Reference< XWindow > xParentWindow; if ( m_pShell->GetViewShell() && m_pShell->GetViewShell()->GetViewFrame() ) xParentWindow = VCLUnoHelper::GetInterface ( &m_pShell->GetViewShell()->GetViewFrame()->GetWindow() ); Reference< dialogs::XExecutableDialog > xDialog = form::TabOrderDialog::createWithModel( comphelper::getProcessComponentContext(), _rxForForm, getControlContainerForView_Lock(), xParentWindow ); xDialog->execute(); } catch( const Exception& ) { OSL_FAIL( "FmXFormShell::ExecuteTabOrderDialog: caught an exception!" ); } } void FmXFormShell::ExecuteSearch_Lock() { if (impl_checkDisposed_Lock()) return; // a collection of all (logical) forms FmFormArray aEmpty; m_aSearchForms.swap( aEmpty ); ::std::vector< OUString > aContextNames; impl_collectFormSearchContexts_nothrow_Lock( m_pShell->GetCurPage()->GetForms(), OUString(), m_aSearchForms, aContextNames); if ( m_aSearchForms.size() != aContextNames.size() ) { SAL_WARN ( "svx.form", "FmXFormShell::ExecuteSearch: nonsense!" ); return; } // filter out the forms which do not contain valid controls at all { FmFormArray aValidForms; ::std::vector< OUString > aValidContexts; FmFormArray::const_iterator form = m_aSearchForms.begin(); ::std::vector< OUString >::const_iterator contextName = aContextNames.begin(); for ( ; form != m_aSearchForms.end(); ++form, ++contextName ) { FmSearchContext aTestContext; aTestContext.nContext = static_cast< sal_Int16 >( form - m_aSearchForms.begin() ); sal_uInt32 nValidControls = OnSearchContextRequest_Lock(aTestContext); if ( nValidControls > 0 ) { aValidForms.push_back( *form ); aValidContexts.push_back( *contextName ); } } m_aSearchForms.swap( aValidForms ); aContextNames.swap( aValidContexts ); } if (m_aSearchForms.empty() ) { // there are no controls that meet all the conditions for a search std::unique_ptr xBox(Application::CreateMessageDialog(nullptr, VclMessageType::Warning, VclButtonsType::Ok, SvxResId(RID_STR_NODATACONTROLS))); xBox->run(); return; } // now I need another 'initial context' sal_Int16 nInitialContext = 0; Reference xActiveForm(getActiveForm_Lock()); for ( size_t i=0; i(i); break; } } // If the dialog should initially offer the text of the active control, // this must have an XTextComponent interface. An addition, this makes // sense only if the current field is also bound to a table (or whatever) field. OUString strActiveField; OUString strInitialText; // ... this I get from my FormController DBG_ASSERT(m_xActiveController.is(), "FmXFormShell::ExecuteSearch : no active controller !"); Reference< XControl> xActiveControl( m_xActiveController->getCurrentControl()); if (xActiveControl.is()) { // the control can tell me its model ... Reference< XControlModel> xActiveModel( xActiveControl->getModel()); DBG_ASSERT(xActiveModel.is(), "FmXFormShell::ExecuteSearch : active control has no model !"); // I ask the model for the ControlSource property ... Reference< XPropertySet> xProperties(xActiveControl->getModel(), UNO_QUERY); if (::comphelper::hasProperty(FM_PROP_CONTROLSOURCE, xProperties) && ::comphelper::hasProperty(FM_PROP_BOUNDFIELD, xProperties)) { Reference< XPropertySet> xField; xProperties->getPropertyValue(FM_PROP_BOUNDFIELD) >>= xField; if (xField.is()) // (only when the thing is really bound) { // and the control itself for a TextComponent interface (so that I can pick up the text there) Reference< XTextComponent> xText(xActiveControl, UNO_QUERY); if (xText.is()) { strActiveField = getLabelName(xProperties); strInitialText = xText->getText(); } } } else { // the control itself has no ControlSource, but maybe it is a GridControl Reference< XGrid> xGrid(xActiveControl, UNO_QUERY); if (xGrid.is()) { // for strActiveField I need the ControlSource of the column, // for that the columns container, for that the GridPeer Reference< XGridPeer> xGridPeer(xActiveControl->getPeer(), UNO_QUERY); Reference< XIndexAccess> xColumns; if (xGridPeer.is()) xColumns.set(xGridPeer->getColumns(),UNO_QUERY); sal_Int16 nViewCol = xGrid->getCurrentColumnPosition(); sal_Int32 nModelCol = GridView2ModelPos(xColumns, nViewCol); Reference< XPropertySet> xCurrentCol; if(xColumns.is()) xColumns->getByIndex(nModelCol) >>= xCurrentCol; if (xCurrentCol.is()) strActiveField = ::comphelper::getString(xCurrentCol->getPropertyValue(FM_PROP_LABEL)); // the text of the current column Reference< XIndexAccess> xColControls(xGridPeer, UNO_QUERY); Reference< XInterface> xCurControl; xColControls->getByIndex(nViewCol) >>= xCurControl; OUString sInitialText; if (IsSearchableControl(xCurControl, &sInitialText)) strInitialText = sInitialText; } } } // taking care of possible GridControls that I know LoopGrids_Lock(LoopGridsSync::DISABLE_SYNC); // Now I am ready for the dialogue. // When the potential deadlocks caused by the use of the solar mutex in // MTs VCLX... classes are eventually cleared, an SM_USETHREAD should be // placed here, because the search in a separate thread is nevertheless // somewhat more fluid. Should be, however, somehow made dependent of the // underlying cursor. DAO for example is not thread-safe. SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create(); ScopedVclPtr pDialog( pFact->CreateFmSearchDialog( m_pShell->GetViewShell()->GetViewFrame()->GetWindow().GetFrameWeld(), strInitialText, aContextNames, nInitialContext, LINK(this, FmXFormShell, OnSearchContextRequest_Lock) )); pDialog->SetActiveField( strActiveField ); pDialog->SetFoundHandler(LINK(this, FmXFormShell, OnFoundData_Lock)); pDialog->SetCanceledNotFoundHdl(LINK(this, FmXFormShell, OnCanceledNotFound_Lock)); pDialog->Execute(); pDialog.disposeAndClear(); // restore GridControls again LoopGrids_Lock(LoopGridsSync::ENABLE_SYNC, LoopGridsFlags::DISABLE_ROCTRLR); m_pShell->GetFormView()->UnMarkAll(m_pShell->GetFormView()->GetSdrPageView()); // because I marked controls in OnFoundData (if I was there) } bool FmXFormShell::GetY2KState_Lock(sal_uInt16& n) { if (impl_checkDisposed_Lock()) return false; if (m_pShell->IsDesignMode()) // in the design mode (without active controls) the main document is to take care of it return false; Reference xForm(getActiveForm_Lock()); if (!xForm.is()) // no current form (in particular no current control) -> the main document is to take care return false; Reference< XRowSet> xDB(xForm, UNO_QUERY); DBG_ASSERT(xDB.is(), "FmXFormShell::GetY2KState : current form has no dbform-interface !"); Reference< XNumberFormatsSupplier> xSupplier( getNumberFormats(getConnection(xDB))); if (xSupplier.is()) { Reference< XPropertySet> xSet(xSupplier->getNumberFormatSettings()); if (xSet.is()) { try { Any aVal( xSet->getPropertyValue("TwoDigitDateStart") ); aVal >>= n; return true; } catch(Exception&) { } } } return false; } void FmXFormShell::SetY2KState_Lock(sal_uInt16 n) { if (impl_checkDisposed_Lock()) return; Reference xActiveForm(getActiveForm_Lock()); Reference< XRowSet > xActiveRowSet( xActiveForm, UNO_QUERY ); if ( xActiveRowSet.is() ) { Reference< XNumberFormatsSupplier > xSupplier( getNumberFormats( getConnection( xActiveRowSet ) ) ); if (xSupplier.is()) { Reference< XPropertySet> xSet(xSupplier->getNumberFormatSettings()); if (xSet.is()) { try { xSet->setPropertyValue("TwoDigitDateStart", makeAny(n)); } catch(Exception&) { OSL_FAIL("FmXFormShell::SetY2KState: Exception occurred!"); } } return; } } // no active form found -> iterate through all current forms Reference< XIndexAccess> xCurrentForms( m_xForms); if (!xCurrentForms.is()) { // in the alive mode, my forms are not set, but the ones on the page are if (m_pShell->GetCurPage()) xCurrentForms.set( m_pShell->GetCurPage()->GetForms( false ), UNO_QUERY ); } if (!xCurrentForms.is()) return; ::comphelper::IndexAccessIterator aIter(xCurrentForms); Reference< XInterface> xCurrentElement( aIter.Next()); while (xCurrentElement.is()) { // is the current element a DatabaseForm? Reference< XRowSet> xElementAsRowSet( xCurrentElement, UNO_QUERY ); if ( xElementAsRowSet.is() ) { Reference< XNumberFormatsSupplier > xSupplier( getNumberFormats( getConnection( xElementAsRowSet ) ) ); if (!xSupplier.is()) continue; Reference< XPropertySet> xSet(xSupplier->getNumberFormatSettings()); if (xSet.is()) { try { xSet->setPropertyValue("TwoDigitDateStart", makeAny(n)); } catch(Exception&) { OSL_FAIL("FmXFormShell::SetY2KState: Exception occurred!"); } } } xCurrentElement = aIter.Next(); } } void FmXFormShell::CloseExternalFormViewer_Lock() { if (impl_checkDisposed_Lock()) return; if (!m_xExternalViewController.is()) return; Reference< css::frame::XFrame> xExternalViewFrame( m_xExternalViewController->getFrame()); Reference< css::frame::XDispatchProvider> xCommLink(xExternalViewFrame, UNO_QUERY); if (!xCommLink.is()) return; xExternalViewFrame->setComponent(nullptr,nullptr); ::comphelper::disposeComponent(xExternalViewFrame); m_xExternalViewController = nullptr; m_xExtViewTriggerController = nullptr; m_xExternalDisplayedForm = nullptr; } Reference FmXFormShell::getInternalForm_Lock(const Reference& _xForm) const { if (impl_checkDisposed_Lock()) return nullptr; Reference< runtime::XFormController> xExternalCtrlr(m_xExternalViewController, UNO_QUERY); if (xExternalCtrlr.is() && (_xForm == xExternalCtrlr->getModel())) { DBG_ASSERT(m_xExternalDisplayedForm.is(), "FmXFormShell::getInternalForm : invalid external form !"); return m_xExternalDisplayedForm; } return _xForm; } Reference FmXFormShell::getInternalForm_Lock(const Reference& _xForm) const { if (impl_checkDisposed_Lock()) return nullptr; Reference< runtime::XFormController > xExternalCtrlr(m_xExternalViewController, UNO_QUERY); if (xExternalCtrlr.is() && (_xForm == xExternalCtrlr->getModel())) { DBG_ASSERT(m_xExternalDisplayedForm.is(), "FmXFormShell::getInternalForm : invalid external form !"); return Reference< XForm>(m_xExternalDisplayedForm, UNO_QUERY); } return _xForm; } namespace { bool lcl_isNavigationRelevant( sal_Int32 _nWhich ) { return ( _nWhich == SID_FM_RECORD_FIRST ) || ( _nWhich == SID_FM_RECORD_PREV ) || ( _nWhich == SID_FM_RECORD_NEXT ) || ( _nWhich == SID_FM_RECORD_LAST ) || ( _nWhich == SID_FM_RECORD_NEW ); } } bool FmXFormShell::IsFormSlotEnabled( sal_Int32 _nSlot, FeatureState* _pCompleteState ) { const svx::ControllerFeatures& rController = lcl_isNavigationRelevant( _nSlot ) ? getNavControllerFeatures_Lock() : getActiveControllerFeatures_Lock(); if ( !_pCompleteState ) return rController->isEnabled( _nSlot ); rController->getState( _nSlot, *_pCompleteState ); return _pCompleteState->Enabled; } void FmXFormShell::ExecuteFormSlot_Lock( sal_Int32 _nSlot ) { const svx::ControllerFeatures& rController = lcl_isNavigationRelevant( _nSlot ) ? getNavControllerFeatures_Lock() : getActiveControllerFeatures_Lock(); rController->execute( _nSlot ); if ( _nSlot == SID_FM_RECORD_UNDO ) { // if we're doing an UNDO, *and* if the affected form is the form which we also display // as external view, then we need to reset the controls of the external form, too if (getInternalForm_Lock(getActiveForm_Lock()) == m_xExternalDisplayedForm) { Reference< XIndexAccess > xContainer( m_xExternalDisplayedForm, UNO_QUERY ); if ( xContainer.is() ) { Reference< XReset > xReset; for ( sal_Int32 i = 0; i < xContainer->getCount(); ++i ) { if ( ( xContainer->getByIndex( i ) >>= xReset ) && xReset.is() ) { // no resets on sub forms Reference< XForm > xAsForm( xReset, UNO_QUERY ); if ( !xAsForm.is() ) xReset->reset(); } } } } } } void FmXFormShell::impl_switchActiveControllerListening_Lock(const bool _bListen) { Reference< XComponent> xComp( m_xActiveController, UNO_QUERY ); if ( !xComp.is() ) return; if ( _bListen ) xComp->addEventListener( static_cast(this) ); else xComp->removeEventListener( static_cast(this) ); } void FmXFormShell::setActiveController_Lock(const Reference& xController, bool _bNoSaveOldContent) { if (impl_checkDisposed_Lock()) return; if (m_bChangingDesignMode) return; DBG_ASSERT(!m_pShell->IsDesignMode(), "only to be used in alive mode"); // if the routine has been called a second time, // the focus should no longer be transferred if (m_bInActivate) { m_bSetFocus = xController != m_xActiveController; return; } if (xController == m_xActiveController) return; // switch all nav dispatchers belonging to the form of the current nav controller to 'non active' Reference< XResultSet> xNavigationForm; if (m_xNavigationController.is()) xNavigationForm.set(m_xNavigationController->getModel(), UNO_QUERY); m_bInActivate = true; // check if the 2 controllers serve different forms Reference< XResultSet> xOldForm; if (m_xActiveController.is()) xOldForm.set(m_xActiveController->getModel(), UNO_QUERY); Reference< XResultSet> xNewForm; if (xController.is()) xNewForm = Reference< XResultSet>(xController->getModel(), UNO_QUERY); xOldForm = getInternalForm_Lock(xOldForm); xNewForm = getInternalForm_Lock(xNewForm); bool bDifferentForm = ( xOldForm.get() != xNewForm.get() ); bool bNeedSave = bDifferentForm && !_bNoSaveOldContent; // we save the content of the old form if we move to a new form, and saving old content is allowed if ( m_xActiveController.is() && bNeedSave ) { // save content on change of the controller; a commit has already been executed if ( m_aActiveControllerFeatures->commitCurrentControl() ) { m_bSetFocus = true; if ( m_aActiveControllerFeatures->isModifiedRow() ) { bool bIsNew = m_aActiveControllerFeatures->isInsertionRow(); bool bResult = m_aActiveControllerFeatures->commitCurrentRecord(); if ( !bResult && m_bSetFocus ) { // if we couldn't save the current record, set the focus back to the // current control Reference< XWindow > xWindow( m_xActiveController->getCurrentControl(), UNO_QUERY ); if ( xWindow.is() ) xWindow->setFocus(); m_bInActivate = false; return; } else if ( bResult && bIsNew ) { Reference< XResultSet > xCursor( m_aActiveControllerFeatures->getCursor().get() ); if ( xCursor.is() ) { DO_SAFE( xCursor->last(); ); } } } } } stopListening_Lock(); impl_switchActiveControllerListening_Lock(false); m_aActiveControllerFeatures.dispose(); m_xActiveController = xController; if ( m_xActiveController.is() ) m_aActiveControllerFeatures.assign( m_xActiveController ); impl_switchActiveControllerListening_Lock(true); if ( m_xActiveController.is() ) m_xActiveForm = getInternalForm_Lock(Reference(m_xActiveController->getModel(), UNO_QUERY)); else m_xActiveForm = nullptr; startListening_Lock(); // activate all dispatchers belonging to form of the new navigation controller xNavigationForm = nullptr; if (m_xNavigationController.is()) xNavigationForm.set(m_xNavigationController->getModel(), UNO_QUERY); m_bInActivate = false; m_pShell->UIFeatureChanged(); m_pShell->GetViewShell()->GetViewFrame()->GetBindings().InvalidateShell(*m_pShell); InvalidateSlot_Lock(SID_FM_FILTER_NAVIGATOR_CONTROL, true); } void FmXFormShell::getCurrentSelection_Lock(InterfaceBag& /* [out] */ _rSelection) const { _rSelection = m_aCurrentSelection; } bool FmXFormShell::setCurrentSelectionFromMark_Lock(const SdrMarkList& _rMarkList) { m_aLastKnownMarkedControls.clear(); if ( ( _rMarkList.GetMarkCount() > 0 ) && isControlList( _rMarkList ) ) collectInterfacesFromMarkList( _rMarkList, m_aLastKnownMarkedControls ); return setCurrentSelection_Lock(m_aLastKnownMarkedControls); } bool FmXFormShell::selectLastMarkedControls_Lock() { return setCurrentSelection_Lock(m_aLastKnownMarkedControls); } bool FmXFormShell::setCurrentSelection_Lock( const InterfaceBag& _rSelection ) { if (impl_checkDisposed_Lock()) return false; DBG_ASSERT( m_pShell->IsDesignMode(), "FmXFormShell::setCurrentSelection: only to be used in design mode!" ); if ( _rSelection.empty() && m_aCurrentSelection.empty() ) // nothing to do return false; if ( _rSelection.size() == m_aCurrentSelection.size() ) { InterfaceBag::const_iterator aNew = _rSelection.begin(); InterfaceBag::const_iterator aOld = m_aCurrentSelection.begin(); for ( ; aNew != _rSelection.end(); ++aNew, ++aOld ) { OSL_ENSURE( Reference< XInterface >( *aNew, UNO_QUERY ).get() == aNew->get(), "FmXFormShell::setCurrentSelection: new interface not normalized!" ); OSL_ENSURE( Reference< XInterface >( *aOld, UNO_QUERY ).get() == aOld->get(), "FmXFormShell::setCurrentSelection: old interface not normalized!" ); if ( aNew->get() != aOld->get() ) break; } if ( aNew == _rSelection.end() ) // both bags equal return false; } // the following is some strange code to ensure that when you have two grid controls in a document, // only one of them can have a selected column. // TODO: this should happen elsewhere, but not here - shouldn't it? if ( !m_aCurrentSelection.empty() ) { Reference< XChild > xCur; if ( m_aCurrentSelection.size() == 1 ) xCur.set(*m_aCurrentSelection.begin(), css::uno::UNO_QUERY); Reference< XChild > xNew; if ( _rSelection.size() == 1 ) xNew.set(*_rSelection.begin(), css::uno::UNO_QUERY); // is there nothing to be selected, or the parents differ, and the parent of the current object // is a selection supplier, then deselect if ( xCur.is() && ( !xNew.is() || ( xCur->getParent() != xNew->getParent() ) ) ) { Reference< XSelectionSupplier > xSel( xCur->getParent(), UNO_QUERY ); if ( xSel.is() ) xSel->select( Any() ); } } m_aCurrentSelection = _rSelection; // determine the form which all the selected objects belong to, if any Reference< XForm > xNewCurrentForm; for (const auto& rpSelection : m_aCurrentSelection) { Reference< XForm > xThisRoundsForm( GetForm( rpSelection ) ); OSL_ENSURE( xThisRoundsForm.is(), "FmXFormShell::setCurrentSelection: *everything* should belong to a form!" ); if ( !xNewCurrentForm.is() ) { // the first form we encountered xNewCurrentForm = xThisRoundsForm; } else if ( xNewCurrentForm != xThisRoundsForm ) { // different forms -> no "current form" at all xNewCurrentForm.clear(); break; } } if ( !m_aCurrentSelection.empty() ) impl_updateCurrentForm_Lock(xNewCurrentForm); // ensure some slots are updated for (sal_Int16 i : SelObjectSlotMap) InvalidateSlot_Lock(i, false); return true; } bool FmXFormShell::isSolelySelected_Lock(const Reference& _rxObject) { return ( m_aCurrentSelection.size() == 1 ) && ( *m_aCurrentSelection.begin() == _rxObject ); } void FmXFormShell::forgetCurrentForm_Lock() { if ( !m_xCurrentForm.is() ) return; // reset ... impl_updateCurrentForm_Lock(nullptr); // ... and try finding a new current form // #i88186# / 2008-04-12 / frank.schoenheit@sun.com impl_defaultCurrentForm_nothrow_Lock(); } void FmXFormShell::impl_updateCurrentForm_Lock(const Reference& _rxNewCurForm) { if (impl_checkDisposed_Lock()) return; m_xCurrentForm = _rxNewCurForm; // propagate to the FormPage(Impl) FmFormPage* pPage = m_pShell->GetCurPage(); if ( pPage ) pPage->GetImpl().setCurForm( m_xCurrentForm ); // ensure the UI which depends on the current form is up-to-date for (sal_Int16 i : DlgSlotMap) InvalidateSlot_Lock(i, false); } void FmXFormShell::startListening_Lock() { if (impl_checkDisposed_Lock()) return; Reference< XRowSet> xDatabaseForm(m_xActiveForm, UNO_QUERY); if (xDatabaseForm.is() && getConnection(xDatabaseForm).is()) { Reference< XPropertySet> xActiveFormSet(m_xActiveForm, UNO_QUERY); if (xActiveFormSet.is()) { // if there is a data source, then build the listener // TODO: this is strange - shouldn't this depend on a isLoaded instead of // a "has command value"? Finally, the command value only means that it was // intended to be loaded, not that it actually *is* loaded OUString aSource = ::comphelper::getString(xActiveFormSet->getPropertyValue(FM_PROP_COMMAND)); if (!aSource.isEmpty()) { m_bDatabaseBar = true; xActiveFormSet->getPropertyValue(FM_PROP_NAVIGATION) >>= m_eNavigate; switch (m_eNavigate) { case NavigationBarMode_PARENT: { // search for the controller via which navigation is possible Reference< XChild> xChild(m_xActiveController, UNO_QUERY); Reference< runtime::XFormController > xParent; while (xChild.is()) { xChild.set(xChild->getParent(), UNO_QUERY); xParent.set(xChild, UNO_QUERY); Reference< XPropertySet> xParentSet; if (xParent.is()) xParentSet.set(xParent->getModel(), UNO_QUERY); if (xParentSet.is()) { xParentSet->getPropertyValue(FM_PROP_NAVIGATION) >>= m_eNavigate; if (m_eNavigate == NavigationBarMode_CURRENT) break; } } m_xNavigationController = xParent; } break; case NavigationBarMode_CURRENT: m_xNavigationController = m_xActiveController; break; default: m_xNavigationController = nullptr; m_bDatabaseBar = false; } m_aNavControllerFeatures.dispose(); if ( m_xNavigationController.is() && ( m_xNavigationController != m_xActiveController ) ) m_aNavControllerFeatures.assign( m_xNavigationController ); // because of RecordCount, listen at the controller which controls the navigation Reference< XPropertySet> xNavigationSet; if (m_xNavigationController.is()) { xNavigationSet.set(m_xNavigationController->getModel(), UNO_QUERY); if (xNavigationSet.is()) xNavigationSet->addPropertyChangeListener(FM_PROP_ROWCOUNT,this); } return; } } } m_eNavigate = NavigationBarMode_NONE; m_bDatabaseBar = false; m_xNavigationController = nullptr; } void FmXFormShell::stopListening_Lock() { if (impl_checkDisposed_Lock()) return; Reference< XRowSet> xDatabaseForm(m_xActiveForm, UNO_QUERY); if ( xDatabaseForm.is() ) { if (m_xNavigationController.is()) { Reference< XPropertySet> xSet(m_xNavigationController->getModel(), UNO_QUERY); if (xSet.is()) xSet->removePropertyChangeListener(FM_PROP_ROWCOUNT, this); } } m_bDatabaseBar = false; m_eNavigate = NavigationBarMode_NONE; m_xNavigationController = nullptr; } void FmXFormShell::ShowSelectionProperties_Lock(bool bShow) { if (impl_checkDisposed_Lock()) return; // if the window is already visible, only update the state bool bHasChild = m_pShell->GetViewShell()->GetViewFrame()->HasChildWindow( SID_FM_SHOW_PROPERTIES ); if ( bHasChild && bShow ) UpdateSlot_Lock(SID_FM_PROPERTY_CONTROL); // else toggle state else m_pShell->GetViewShell()->GetViewFrame()->ToggleChildWindow(SID_FM_SHOW_PROPERTIES); InvalidateSlot_Lock(SID_FM_PROPERTIES, false); InvalidateSlot_Lock(SID_FM_CTL_PROPERTIES, false); } IMPL_LINK(FmXFormShell, OnFoundData_Lock, FmFoundRecordInformation&, rfriWhere, void) { if (impl_checkDisposed_Lock()) return; DBG_ASSERT((rfriWhere.nContext >= 0) && (rfriWhere.nContext < static_cast(m_aSearchForms.size())), "FmXFormShell::OnFoundData : invalid context!"); Reference< XForm> xForm( m_aSearchForms.at(rfriWhere.nContext)); DBG_ASSERT(xForm.is(), "FmXFormShell::OnFoundData : invalid form!"); Reference< XRowLocate> xCursor(xForm, UNO_QUERY); if (!xCursor.is()) return; // what should I do there? // to the record try { xCursor->moveToBookmark(rfriWhere.aPosition); } catch(const SQLException&) { OSL_FAIL("Can position on bookmark!"); } LoopGrids_Lock(LoopGridsSync::FORCE_SYNC); // and to the field (for that, I collected the XVclComponent interfaces before the start of the search) SAL_WARN_IF(static_cast(rfriWhere.nFieldPos) >= m_arrSearchedControls.size(), "svx.form", "FmXFormShell::OnFoundData : invalid index!"); SdrObject* pObject = m_arrSearchedControls.at(rfriWhere.nFieldPos); m_pShell->GetFormView()->UnMarkAll(m_pShell->GetFormView()->GetSdrPageView()); m_pShell->GetFormView()->MarkObj(pObject, m_pShell->GetFormView()->GetSdrPageView()); FmFormObj* pFormObject = FmFormObj::GetFormObject( pObject ); Reference< XControlModel > xControlModel( pFormObject ? pFormObject->GetUnoControlModel() : Reference< XControlModel >() ); DBG_ASSERT( xControlModel.is(), "FmXFormShell::OnFoundData: invalid control!" ); if ( !xControlModel.is() ) return; // disable the permanent cursor for the last grid we found a record if (m_xLastGridFound.is() && (m_xLastGridFound != xControlModel)) { Reference< XPropertySet> xOldSet(m_xLastGridFound, UNO_QUERY); xOldSet->setPropertyValue(FM_PROP_ALWAYSSHOWCURSOR, makeAny( false ) ); Reference< XPropertyState> xOldSetState(xOldSet, UNO_QUERY); if (xOldSetState.is()) xOldSetState->setPropertyToDefault(FM_PROP_CURSORCOLOR); else xOldSet->setPropertyValue(FM_PROP_CURSORCOLOR, Any()); } // if the field is in a GridControl, I have to additionally go into the corresponding column there sal_Int32 nGridColumn = m_arrRelativeGridColumn[rfriWhere.nFieldPos]; if (nGridColumn != -1) { // unfortunately, I have to first get the control again Reference xControl(pFormObject ? impl_getControl_Lock(xControlModel, *pFormObject) : Reference()); Reference< XGrid> xGrid(xControl, UNO_QUERY); DBG_ASSERT(xGrid.is(), "FmXFormShell::OnFoundData : invalid control!"); // if one of the asserts fires, I probably did something wrong on building of m_arrSearchedControls // enable a permanent cursor for the grid so we can see the found text Reference< XPropertySet> xModelSet(xControlModel, UNO_QUERY); DBG_ASSERT(xModelSet.is(), "FmXFormShell::OnFoundData : invalid control model (no property set) !"); xModelSet->setPropertyValue( FM_PROP_ALWAYSSHOWCURSOR, makeAny( true ) ); xModelSet->setPropertyValue( FM_PROP_CURSORCOLOR, makeAny( COL_LIGHTRED ) ); m_xLastGridFound = xControlModel; if ( xGrid.is() ) xGrid->setCurrentColumnPosition(static_cast(nGridColumn)); } // As the cursor has been repositioned, I have (in positioned) invalidated // my form bar slots. But that does not take effect here unfortunately, as // generally the (modal) search dialog is of course at the top ... So, force ... sal_uInt16 nPos = 0; while (DatabaseSlotMap[nPos]) m_pShell->GetViewShell()->GetViewFrame()->GetBindings().Update(DatabaseSlotMap[nPos++]); // unfortunately the update goes against the invalidate with only individual slots } IMPL_LINK(FmXFormShell, OnCanceledNotFound_Lock, FmFoundRecordInformation&, rfriWhere, void) { if (impl_checkDisposed_Lock()) return; DBG_ASSERT((rfriWhere.nContext >= 0) && (rfriWhere.nContext < static_cast(m_aSearchForms.size())), "FmXFormShell::OnCanceledNotFound : invalid context!"); Reference< XForm> xForm( m_aSearchForms.at(rfriWhere.nContext)); DBG_ASSERT(xForm.is(), "FmXFormShell::OnCanceledNotFound : invalid form!"); Reference< XRowLocate> xCursor(xForm, UNO_QUERY); if (!xCursor.is()) return; // what should I do there? // to the record try { xCursor->moveToBookmark(rfriWhere.aPosition); } catch(const SQLException&) { OSL_FAIL("Can position on bookmark!"); } m_pShell->GetFormView()->UnMarkAll(m_pShell->GetFormView()->GetSdrPageView()); } IMPL_LINK(FmXFormShell, OnSearchContextRequest_Lock, FmSearchContext&, rfmscContextInfo, sal_uInt32) { if (impl_checkDisposed_Lock()) return 0; DBG_ASSERT(rfmscContextInfo.nContext < static_cast(m_aSearchForms.size()), "FmXFormShell::OnSearchContextRequest : invalid parameter !"); Reference< XForm> xForm( m_aSearchForms.at(rfmscContextInfo.nContext)); DBG_ASSERT(xForm.is(), "FmXFormShell::OnSearchContextRequest : unexpected : invalid context !"); Reference< XResultSet> xIter(xForm, UNO_QUERY); DBG_ASSERT(xIter.is(), "FmXFormShell::OnSearchContextRequest : unexpected : context has no iterator !"); // assemble the list of fields to involve (that is, the ControlSources of all fields that have such a property) OUString strFieldList, sFieldDisplayNames; m_arrSearchedControls.clear(); m_arrRelativeGridColumn.clear(); // small problem: To mark found fields, I need SdrObjects. To determine which controls // to include in the search, I need Controls (that is, XControl interfaces). So I have // to iterate over one of them and get the other in some way. Unfortunately, there is // no direct connexion between the two worlds (except from a GetUnoControl to a // SdrUnoObject, but this requires an OutputDevice I can not do anything with. // However I can get to the Model from the Control and also from the SdrObject, and in // this way the assignment SdrObject<->Control is possible with a double loop. // The alternative to this (ugly but certainly not entirely fixable) solution would be // to renounce the caching of the SdrObjects, which would lead to significant extra // work in OnFoundData (since there I'd have to get the SdrObject first thing every // time). But since OnFoundData is usually called more often than ExecuteSearch, I'll // do that here. Reference< XNameAccess> xValidFormFields; Reference< XColumnsSupplier> xSupplyCols(xIter, UNO_QUERY); DBG_ASSERT(xSupplyCols.is(), "FmXFormShell::OnSearchContextRequest : invalid cursor : no columns supplier !"); if (xSupplyCols.is()) xValidFormFields = xSupplyCols->getColumns(); DBG_ASSERT(xValidFormFields.is(), "FmXFormShell::OnSearchContextRequest : form has no fields !"); // current Page/Controller FmFormPage* pCurrentPage = m_pShell->GetCurPage(); assert(pCurrentPage && "FmXFormShell::OnSearchContextRequest : no page !"); // Search all SdrControls of this page... OUString sControlSource, aName; SdrObjListIter aPageIter( pCurrentPage ); while ( aPageIter.IsMore() ) { SdrObject* pCurrent = aPageIter.Next(); FmFormObj* pFormObject = FmFormObj::GetFormObject( pCurrent ); // note that in case pCurrent is a virtual object, pFormObject points to the referenced object if ( !pFormObject ) continue; // the current object's model, in different tastes Reference< XControlModel> xControlModel( pFormObject->GetUnoControlModel() ); Reference< XFormComponent > xCurrentFormComponent( xControlModel, UNO_QUERY ); DBG_ASSERT( xCurrentFormComponent.is(), "FmXFormShell::OnSearchContextRequest: invalid objects!" ); if ( !xCurrentFormComponent.is() ) continue; // does the component belong to the form which we're interested in? if ( xCurrentFormComponent->getParent() != xForm ) continue; // ... ask for the ControlSource property SearchableControlIterator iter( xCurrentFormComponent ); Reference< XControl> xControl; // the control that has model xControlModel // (the following while can be passed through several times, without the Control // being modified, so I don't have to search every time from scratch) Reference< XInterface > xSearchable( iter.Next() ); while ( xSearchable.is() ) { sControlSource = iter.getCurrentValue(); if ( sControlSource.isEmpty() ) { // the current element has no ControlSource, so it is a GridControl (that // is the only thing that still permits the SearchableControlIteratore) xControl = impl_getControl_Lock(xControlModel, *pFormObject); DBG_ASSERT(xControl.is(), "FmXFormShell::OnSearchContextRequest : didn't ::std::find a control with requested model !"); Reference< XGridPeer> xGridPeer; if ( xControl.is() ) xGridPeer.set( xControl->getPeer(), UNO_QUERY ); do { if (!xGridPeer.is()) break; Reference< XIndexAccess> xPeerContainer(xGridPeer, UNO_QUERY); if (!xPeerContainer.is()) break; Reference< XIndexAccess> xModelColumns(xGridPeer->getColumns(), UNO_QUERY); DBG_ASSERT(xModelColumns.is(), "FmXFormShell::OnSearchContextRequest : there is a grid control without columns !"); // the case 'no columns' should be indicated with an empty container, I think ... DBG_ASSERT(xModelColumns->getCount() >= xPeerContainer->getCount(), "FmXFormShell::OnSearchContextRequest : impossible : have more view than model columns !"); Reference< XInterface> xCurrentColumn; for (sal_Int32 nViewPos=0; nViewPosgetCount(); ++nViewPos) { xPeerContainer->getByIndex(nViewPos) >>= xCurrentColumn; if (!xCurrentColumn.is()) continue; // can we use this column control for searching ? if (!IsSearchableControl(xCurrentColumn)) continue; sal_Int32 nModelPos = GridView2ModelPos(xModelColumns, nViewPos); Reference< XPropertySet> xCurrentColModel; xModelColumns->getByIndex(nModelPos) >>= xCurrentColModel; aName = ::comphelper::getString(xCurrentColModel->getPropertyValue(FM_PROP_CONTROLSOURCE)); // the cursor has a field matching the control source ? if (xValidFormFields->hasByName(aName)) { strFieldList = strFieldList + aName + ";"; sFieldDisplayNames = sFieldDisplayNames + ::comphelper::getString(xCurrentColModel->getPropertyValue(FM_PROP_LABEL)) + ";"; rfmscContextInfo.arrFields.push_back(xCurrentColumn); // and the SdrOject to the Field m_arrSearchedControls.push_back(pCurrent); // the number of the column m_arrRelativeGridColumn.push_back(nViewPos); } } } while (false); } else { if (!sControlSource.isEmpty() && xValidFormFields->hasByName(sControlSource)) { // now I need the Control to SdrObject if (!xControl.is()) { xControl = impl_getControl_Lock(xControlModel, *pFormObject); DBG_ASSERT(xControl.is(), "FmXFormShell::OnSearchContextRequest : didn't ::std::find a control with requested model !"); } if (IsSearchableControl(xControl)) { // all tests passed -> take along in the list strFieldList = strFieldList + sControlSource + ";"; // the label which should appear for the control : sFieldDisplayNames = sFieldDisplayNames + getLabelName(Reference< XPropertySet>(xControlModel, UNO_QUERY)) + ";"; // mark the SdrObject (accelerates the treatment in OnFoundData) m_arrSearchedControls.push_back(pCurrent); // the number of the column (here a dummy, since it is only interesting for GridControls) m_arrRelativeGridColumn.push_back(-1); // and for the formatted search... rfmscContextInfo.arrFields.emplace_back( xControl, UNO_QUERY ); } } } xSearchable = iter.Next(); } } strFieldList = comphelper::string::stripEnd(strFieldList, ';'); sFieldDisplayNames = comphelper::string::stripEnd(sFieldDisplayNames, ';'); if (rfmscContextInfo.arrFields.empty()) { rfmscContextInfo.arrFields.clear(); rfmscContextInfo.xCursor = nullptr; rfmscContextInfo.strUsedFields.clear(); return 0L; } rfmscContextInfo.xCursor = xIter; rfmscContextInfo.strUsedFields = strFieldList; rfmscContextInfo.sFieldDisplayNames = sFieldDisplayNames; // 66463 - 31.05.99 - FS // when the cursor is a non-STANDARD RecordMode, set it back Reference< XPropertySet> xCursorSet(rfmscContextInfo.xCursor, UNO_QUERY); Reference< XResultSetUpdate> xUpdateCursor(rfmscContextInfo.xCursor, UNO_QUERY); if (xUpdateCursor.is() && xCursorSet.is()) { if (::comphelper::getBOOL(xCursorSet->getPropertyValue(FM_PROP_ISNEW))) xUpdateCursor->moveToCurrentRow(); else if (::comphelper::getBOOL(xCursorSet->getPropertyValue(FM_PROP_ISMODIFIED))) xUpdateCursor->cancelRowUpdates(); } return rfmscContextInfo.arrFields.size(); } // XContainerListener void SAL_CALL FmXFormShell::elementInserted(const ContainerEvent& evt) { SolarMutexGuard g; if (impl_checkDisposed_Lock()) return; // new object to listen to Reference< XInterface> xTemp; evt.Element >>= xTemp; AddElement_Lock(xTemp); m_pShell->DetermineForms(true); } void SAL_CALL FmXFormShell::elementReplaced(const ContainerEvent& evt) { SolarMutexGuard g; if (impl_checkDisposed_Lock() ) return; Reference< XInterface> xTemp; evt.ReplacedElement >>= xTemp; RemoveElement_Lock(xTemp); evt.Element >>= xTemp; AddElement_Lock(xTemp); } void SAL_CALL FmXFormShell::elementRemoved(const ContainerEvent& evt) { SolarMutexGuard g; if (impl_checkDisposed_Lock()) return; Reference< XInterface> xTemp; evt.Element >>= xTemp; RemoveElement_Lock(xTemp); m_pShell->DetermineForms(true); } void FmXFormShell::UpdateForms_Lock(bool _bInvalidate) { if (impl_checkDisposed_Lock()) return; Reference< XIndexAccess > xForms; FmFormPage* pPage = m_pShell->GetCurPage(); if ( pPage && m_pShell->m_bDesignMode ) xForms.set(pPage->GetForms( false ), css::uno::UNO_QUERY); if ( m_xForms != xForms ) { RemoveElement_Lock( m_xForms ); m_xForms = xForms; AddElement_Lock(m_xForms); } SolarMutexGuard g; m_pShell->DetermineForms( _bInvalidate ); } void FmXFormShell::AddElement_Lock(const Reference& _xElement) { if (impl_checkDisposed_Lock()) return; impl_AddElement_nothrow(_xElement); } void FmXFormShell::impl_AddElement_nothrow(const Reference< XInterface>& Element) { // listen at the container const Reference< XIndexContainer> xContainer(Element, UNO_QUERY); if (xContainer.is()) { const sal_uInt32 nCount = xContainer->getCount(); Reference< XInterface> xElement; for (sal_uInt32 i = 0; i < nCount; ++i) { xElement.set(xContainer->getByIndex(i),UNO_QUERY); impl_AddElement_nothrow(xElement); } const Reference< XContainer> xCont(Element, UNO_QUERY); if (xCont.is()) xCont->addContainerListener(this); } const Reference< css::view::XSelectionSupplier> xSelSupplier(Element, UNO_QUERY); if (xSelSupplier.is()) xSelSupplier->addSelectionChangeListener(this); } void FmXFormShell::RemoveElement_Lock(const Reference& Element) { if (impl_checkDisposed_Lock()) return; impl_RemoveElement_nothrow_Lock(Element); } void FmXFormShell::impl_RemoveElement_nothrow_Lock(const Reference& Element) { const Reference< css::view::XSelectionSupplier> xSelSupplier(Element, UNO_QUERY); if (xSelSupplier.is()) xSelSupplier->removeSelectionChangeListener(this); // remove connection to children const Reference< XIndexContainer> xContainer(Element, UNO_QUERY); if (xContainer.is()) { const Reference< XContainer> xCont(Element, UNO_QUERY); if (xCont.is()) xCont->removeContainerListener(this); const sal_uInt32 nCount = xContainer->getCount(); Reference< XInterface> xElement; for (sal_uInt32 i = 0; i < nCount; i++) { xElement.set(xContainer->getByIndex(i),UNO_QUERY); impl_RemoveElement_nothrow_Lock(xElement); } } InterfaceBag::iterator wasSelectedPos = m_aCurrentSelection.find( Element ); if ( wasSelectedPos != m_aCurrentSelection.end() ) m_aCurrentSelection.erase( wasSelectedPos ); } void SAL_CALL FmXFormShell::selectionChanged(const lang::EventObject& rEvent) { SolarMutexGuard g; if (impl_checkDisposed_Lock()) return; Reference< XSelectionSupplier > xSupplier( rEvent.Source, UNO_QUERY ); Reference< XInterface > xSelObj( xSupplier->getSelection(), UNO_QUERY ); // a selection was removed, this can only be done by the shell if ( !xSelObj.is() ) return; EnableTrackProperties_Lock(false); bool bMarkChanged = m_pShell->GetFormView()->checkUnMarkAll(rEvent.Source); Reference< XForm > xNewForm( GetForm( rEvent.Source ) ); InterfaceBag aNewSelection; aNewSelection.insert( Reference( xSelObj, UNO_QUERY ) ); if (setCurrentSelection_Lock(aNewSelection) && IsPropBrwOpen_Lock()) ShowSelectionProperties_Lock(true); EnableTrackProperties_Lock(true); if ( bMarkChanged ) m_pShell->NotifyMarkListChanged( m_pShell->GetFormView() ); } IMPL_LINK_NOARG(FmXFormShell, OnTimeOut_Lock, Timer*, void) { if (impl_checkDisposed_Lock()) return; if (m_pShell->IsDesignMode() && m_pShell->GetFormView()) SetSelection_Lock(m_pShell->GetFormView()->GetMarkedObjectList()); } void FmXFormShell::SetSelectionDelayed_Lock() { if (impl_checkDisposed_Lock()) return; if (m_pShell->IsDesignMode() && IsTrackPropertiesEnabled_Lock() && !m_aMarkTimer.IsActive()) m_aMarkTimer.Start(); } void FmXFormShell::SetSelection_Lock(const SdrMarkList& rMarkList) { if (impl_checkDisposed_Lock()) return; DetermineSelection_Lock(rMarkList); m_pShell->NotifyMarkListChanged(m_pShell->GetFormView()); } void FmXFormShell::DetermineSelection_Lock(const SdrMarkList& rMarkList) { if (setCurrentSelectionFromMark_Lock(rMarkList) && IsPropBrwOpen_Lock()) ShowSelectionProperties_Lock(true); } bool FmXFormShell::IsPropBrwOpen_Lock() const { if (impl_checkDisposed_Lock()) return false; return m_pShell->GetViewShell() && m_pShell->GetViewShell()->GetViewFrame() && m_pShell->GetViewShell()->GetViewFrame()->HasChildWindow(SID_FM_SHOW_PROPERTIES); } class FmXFormShell::SuspendPropertyTracking { private: FmXFormShell& m_rShell; bool m_bEnabled; public: explicit SuspendPropertyTracking( FmXFormShell& _rShell ) :m_rShell( _rShell ) ,m_bEnabled( false ) { if (m_rShell.IsTrackPropertiesEnabled_Lock()) { m_rShell.EnableTrackProperties_Lock(false); m_bEnabled = true; } } ~SuspendPropertyTracking( ) { if ( m_bEnabled ) // note that ( false != m_bEnabled ) implies ( NULL != m_pShell ) m_rShell.EnableTrackProperties_Lock(true); } }; void FmXFormShell::SetDesignMode_Lock(bool bDesign) { if (impl_checkDisposed_Lock()) return; DBG_ASSERT(m_pShell->GetFormView(), "FmXFormShell::SetDesignMode : invalid call (have no shell or no view) !"); m_bChangingDesignMode = true; // 67506 - 15.07.99 - FS // if we're switching off the design mode we have to force the property browser to be closed // so it can commit it's changes _before_ we load the forms if (!bDesign) { m_bHadPropertyBrowserInDesignMode = m_pShell->GetViewShell()->GetViewFrame()->HasChildWindow(SID_FM_SHOW_PROPERTIES); if (m_bHadPropertyBrowserInDesignMode) m_pShell->GetViewShell()->GetViewFrame()->ToggleChildWindow(SID_FM_SHOW_PROPERTIES); } FmFormView* pFormView = m_pShell->GetFormView(); if (bDesign) { // we are currently filtering, so stop filtering if (m_bFilterMode) stopFiltering_Lock(false); // unsubscribe from the objects of my MarkList pFormView->GetImpl()->stopMarkListWatching(); } else { m_aMarkTimer.Stop(); SuspendPropertyTracking aSuspend( *this ); pFormView->GetImpl()->saveMarkList(); } if (bDesign && m_xExternalViewController.is()) CloseExternalFormViewer_Lock(); pFormView->ChangeDesignMode(bDesign); // notify listeners FmDesignModeChangedHint aChangedHint( bDesign ); m_pShell->Broadcast(aChangedHint); m_pShell->m_bDesignMode = bDesign; UpdateForms_Lock(false); m_pTextShell->designModeChanged(); if (bDesign) { SdrMarkList aList; { // during changing the mark list, don't track the selected objects in the property browser SuspendPropertyTracking aSuspend( *this ); // restore the marks pFormView->GetImpl()->restoreMarkList( aList ); } // synchronize with the restored mark list if ( aList.GetMarkCount() ) SetSelection_Lock(aList); } else { // subscribe to the model of the view (so that I'm informed when someone deletes // during the alive mode controls that I had saved in the saveMarklist (60343) pFormView->GetImpl()->startMarkListWatching(); } m_pShell->UIFeatureChanged(); // 67506 - 15.07.99 - FS if (bDesign && m_bHadPropertyBrowserInDesignMode) { // The UIFeatureChanged performs an update (a check of the available features) asynchronously. // So we can't call ShowSelectionProperties directly as the according feature isn't enabled yet. // That's why we use an asynchron execution on the dispatcher. // (And that's why this has to be done AFTER the UIFeatureChanged.) m_pShell->GetViewShell()->GetViewFrame()->GetDispatcher()->Execute( SID_FM_SHOW_PROPERTY_BROWSER, SfxCallMode::ASYNCHRON ); } m_bChangingDesignMode = false; } Reference< XControl> FmXFormShell::impl_getControl_Lock(const Reference& i_rxModel, const FmFormObj& i_rKnownFormObj) { if (impl_checkDisposed_Lock()) return nullptr; Reference< XControl > xControl; try { Reference< XControlContainer> xControlContainer(getControlContainerForView_Lock(), UNO_SET_THROW); Sequence< Reference< XControl > > seqControls( xControlContainer->getControls() ); // ... that I can then search for (Reference< XControl > const & control : seqControls) { xControl.set( control, UNO_SET_THROW ); Reference< XControlModel > xCurrentModel( xControl->getModel() ); if ( xCurrentModel == i_rxModel ) break; xControl.clear(); } if ( !xControl.is() ) { // fallback (some controls might not have been created, yet, since they were never visible so far) Reference< XControl > xContainerControl( xControlContainer, UNO_QUERY_THROW ); const vcl::Window* pContainerWindow = VCLUnoHelper::GetWindow( xContainerControl->getPeer() ); ENSURE_OR_THROW( pContainerWindow, "unexpected control container implementation" ); const SdrView* pSdrView = m_pShell ? m_pShell->GetFormView() : nullptr; ENSURE_OR_THROW( pSdrView, "no current view" ); xControl.set( i_rKnownFormObj.GetUnoControl( *pSdrView, *pContainerWindow ), UNO_SET_THROW ); } } catch( const Exception& ) { DBG_UNHANDLED_EXCEPTION("svx"); } OSL_ENSURE( xControl.is(), "FmXFormShell::impl_getControl: no control found!" ); return xControl; } // note: _out_rForms is a member so needs lock void FmXFormShell::impl_collectFormSearchContexts_nothrow_Lock( const Reference& _rxStartingPoint, const OUString& _rCurrentLevelPrefix, FmFormArray& _out_rForms, ::std::vector< OUString >& _out_rNames ) { try { Reference< XIndexAccess> xContainer( _rxStartingPoint, UNO_QUERY ); if ( !xContainer.is() ) return; sal_Int32 nCount( xContainer->getCount() ); if ( nCount == 0 ) return; OUString sCurrentFormName; OUStringBuffer aNextLevelPrefix; for ( sal_Int32 i=0; i xCurrentAsForm( xContainer->getByIndex(i), UNO_QUERY ); if ( !xCurrentAsForm.is() ) continue; Reference< XNamed > xNamed( xCurrentAsForm, UNO_QUERY_THROW ); sCurrentFormName = xNamed->getName(); // the name of the current form OUStringBuffer sCompleteCurrentName( sCurrentFormName ); if ( !_rCurrentLevelPrefix.isEmpty() ) { sCompleteCurrentName.append( " (" ); sCompleteCurrentName.append ( _rCurrentLevelPrefix ); sCompleteCurrentName.append( ")" ); } // the prefix for the next level aNextLevelPrefix = _rCurrentLevelPrefix; if ( !_rCurrentLevelPrefix.isEmpty() ) aNextLevelPrefix.append( '/' ); aNextLevelPrefix.append( sCurrentFormName ); // remember both the form and it's "display name" _out_rForms.push_back( xCurrentAsForm ); _out_rNames.push_back( sCompleteCurrentName.makeStringAndClear() ); // and descend impl_collectFormSearchContexts_nothrow_Lock( xCurrentAsForm, aNextLevelPrefix.makeStringAndClear(), _out_rForms, _out_rNames); } } catch( const Exception& ) { DBG_UNHANDLED_EXCEPTION("svx"); } } void FmXFormShell::startFiltering_Lock() { if (impl_checkDisposed_Lock()) return; // setting all forms in filter mode FmXFormView* pXView = m_pShell->GetFormView()->GetImpl(); // if the active controller is our external one we have to use the trigger controller Reference< XControlContainer> xContainer; if (getActiveController_Lock() == m_xExternalViewController) { DBG_ASSERT(m_xExtViewTriggerController.is(), "FmXFormShell::startFiltering : inconsistent : active external controller, but no one triggered this !"); xContainer = m_xExtViewTriggerController->getContainer(); } else xContainer = getActiveController_Lock()->getContainer(); PFormViewPageWindowAdapter pAdapter = pXView->findWindow( xContainer ); if ( pAdapter.is() ) { const ::std::vector< Reference< runtime::XFormController> >& rControllerList = pAdapter->GetList(); for (const auto& rpController : rControllerList) { Reference< XModeSelector> xModeSelector(rpController, UNO_QUERY); if (xModeSelector.is()) xModeSelector->setMode( "FilterMode" ); } } m_bFilterMode = true; m_pShell->UIFeatureChanged(); SfxViewFrame* pViewFrame = m_pShell->GetViewShell()->GetViewFrame(); pViewFrame->GetBindings().InvalidateShell( *m_pShell ); if ( pViewFrame->KnowsChildWindow( SID_FM_FILTER_NAVIGATOR ) && !pViewFrame->HasChildWindow( SID_FM_FILTER_NAVIGATOR ) ) { pViewFrame->ToggleChildWindow( SID_FM_FILTER_NAVIGATOR ); } } static void saveFilter(const Reference< runtime::XFormController >& _rxController) { Reference< XPropertySet> xFormAsSet(_rxController->getModel(), UNO_QUERY); Reference< XPropertySet> xControllerAsSet(_rxController, UNO_QUERY); Reference< XIndexAccess> xControllerAsIndex(_rxController, UNO_QUERY); // call the subcontroller Reference< runtime::XFormController > xController; for (sal_Int32 i = 0, nCount = xControllerAsIndex->getCount(); i < nCount; ++i) { xControllerAsIndex->getByIndex(i) >>= xController; saveFilter(xController); } try { xFormAsSet->setPropertyValue(FM_PROP_FILTER, xControllerAsSet->getPropertyValue(FM_PROP_FILTER)); xFormAsSet->setPropertyValue(FM_PROP_APPLYFILTER, makeAny( true ) ); } catch (const Exception& ) { DBG_UNHANDLED_EXCEPTION("svx"); } } void FmXFormShell::stopFiltering_Lock(bool bSave) { if (impl_checkDisposed_Lock()) return; m_bFilterMode = false; FmXFormView* pXView = m_pShell->GetFormView()->GetImpl(); // if the active controller is our external one we have to use the trigger controller Reference< XControlContainer> xContainer; if (getActiveController_Lock() == m_xExternalViewController) { DBG_ASSERT(m_xExtViewTriggerController.is(), "FmXFormShell::stopFiltering : inconsistent : active external controller, but no one triggered this !"); xContainer = m_xExtViewTriggerController->getContainer(); } else xContainer = getActiveController_Lock()->getContainer(); PFormViewPageWindowAdapter pAdapter = pXView->findWindow(xContainer); if ( pAdapter.is() ) { const ::std::vector< Reference< runtime::XFormController > >& rControllerList = pAdapter->GetList(); ::std::vector < OUString > aOriginalFilters; ::std::vector < bool > aOriginalApplyFlags; if (bSave) { for (const auto& rpController : rControllerList) { // remember the current filter settings in case we're going to reload the forms below (which may fail) try { Reference< XPropertySet > xFormAsSet(rpController->getModel(), UNO_QUERY); aOriginalFilters.push_back(::comphelper::getString(xFormAsSet->getPropertyValue(FM_PROP_FILTER))); aOriginalApplyFlags.push_back(::comphelper::getBOOL(xFormAsSet->getPropertyValue(FM_PROP_APPLYFILTER))); } catch(Exception&) { OSL_FAIL("FmXFormShell::stopFiltering : could not get the original filter !"); // put dummies into the arrays so the they have the right size if (aOriginalFilters.size() == aOriginalApplyFlags.size()) // the first getPropertyValue failed -> use two dummies aOriginalFilters.emplace_back( ); aOriginalApplyFlags.push_back( false ); } saveFilter(rpController); } } for (const auto& rController : rControllerList) { Reference< XModeSelector> xModeSelector(rController, UNO_QUERY); if (xModeSelector.is()) xModeSelector->setMode( "DataMode" ); } if (bSave) // execute the filter { const ::std::vector< Reference< runtime::XFormController > > & rControllers = pAdapter->GetList(); for (::std::vector< Reference< runtime::XFormController > > ::const_iterator j = rControllers.begin(); j != rControllers.end(); ++j) { Reference< XLoadable> xReload((*j)->getModel(), UNO_QUERY); if (!xReload.is()) continue; Reference< XPropertySet > xFormSet(xReload, UNO_QUERY); try { xReload->reload(); } catch(Exception&) { OSL_FAIL("FmXFormShell::stopFiltering: Exception occurred!"); } if (!isRowSetAlive(xFormSet)) { // something went wrong -> restore the original state OUString sOriginalFilter = aOriginalFilters[ j - rControllers.begin() ]; bool bOriginalApplyFlag = aOriginalApplyFlags[ j - rControllers.begin() ]; try { xFormSet->setPropertyValue(FM_PROP_FILTER, makeAny(sOriginalFilter)); xFormSet->setPropertyValue(FM_PROP_APPLYFILTER, makeAny(bOriginalApplyFlag)); xReload->reload(); } catch(const Exception&) { DBG_UNHANDLED_EXCEPTION("svx"); } } } } } m_pShell->UIFeatureChanged(); m_pShell->GetViewShell()->GetViewFrame()->GetBindings().InvalidateShell(*m_pShell); } void FmXFormShell::CreateExternalView_Lock() { if (impl_checkDisposed_Lock()) return; DBG_ASSERT(m_xAttachedFrame.is(), "FmXFormShell::CreateExternalView : no frame !"); // the frame the external view is displayed in bool bAlreadyExistent = m_xExternalViewController.is(); Reference< css::frame::XFrame> xExternalViewFrame; OUString sFrameName("_beamer"); Reference xCurrentNavController(getNavController_Lock()); // the creation of the "partwindow" may cause a deactivate of the document which will result in our nav controller to be set to NULL // _first_ check if we have any valid fields we can use for the grid view // FS - 21.10.99 - 69219 { FmXBoundFormFieldIterator aModelIterator(xCurrentNavController->getModel()); Reference< XPropertySet> xCurrentModelSet; bool bHaveUsableControls = false; while ((xCurrentModelSet = Reference< XPropertySet>(aModelIterator.Next(), UNO_QUERY)).is()) { // the FmXBoundFormFieldIterator only supplies controls with a valid control source // so we just have to check the field type sal_Int16 nClassId = ::comphelper::getINT16(xCurrentModelSet->getPropertyValue(FM_PROP_CLASSID)); switch (nClassId) { case FormComponentType::IMAGECONTROL: case FormComponentType::CONTROL: continue; } bHaveUsableControls = true; break; } if (!bHaveUsableControls) { std::unique_ptr xBox(Application::CreateMessageDialog(nullptr, VclMessageType::Warning, VclButtonsType::Ok, SvxResId(RID_STR_NOCONTROLS_FOR_EXTERNALDISPLAY))); xBox->run(); return; } } // load the component for external form views if (!bAlreadyExistent) { URL aWantToDispatch; aWantToDispatch.Complete = FMURL_COMPONENT_FORMGRIDVIEW; Reference< css::frame::XDispatchProvider> xProv(m_xAttachedFrame, UNO_QUERY); Reference< css::frame::XDispatch> xDisp; if (xProv.is()) xDisp = xProv->queryDispatch(aWantToDispatch, sFrameName, css::frame::FrameSearchFlag::CHILDREN | css::frame::FrameSearchFlag::CREATE); if (xDisp.is()) { xDisp->dispatch(aWantToDispatch, Sequence< PropertyValue>()); } // with this the component should be loaded, now search the frame where it resides in xExternalViewFrame = m_xAttachedFrame->findFrame(sFrameName, css::frame::FrameSearchFlag::CHILDREN); if (xExternalViewFrame.is()) { m_xExternalViewController = xExternalViewFrame->getController(); Reference< css::lang::XComponent> xComp(m_xExternalViewController, UNO_QUERY); if (xComp.is()) xComp->addEventListener(static_cast(static_cast(this))); } } else { xExternalViewFrame = m_xExternalViewController->getFrame(); Reference< css::frame::XDispatchProvider> xCommLink(xExternalViewFrame, UNO_QUERY); // if we display the active form we interpret the slot as "remove it" Reference< XForm> xCurrentModel(xCurrentNavController->getModel(), UNO_QUERY); if ((xCurrentModel == m_xExternalDisplayedForm) || (getInternalForm_Lock(xCurrentModel) == m_xExternalDisplayedForm)) { if (m_xExternalViewController == getActiveController_Lock()) { Reference< runtime::XFormController > xAsFormController( m_xExternalViewController, UNO_QUERY ); ControllerFeatures aHelper( xAsFormController ); (void)aHelper->commitCurrentControl(); } Reference< runtime::XFormController > xNewController(m_xExtViewTriggerController); CloseExternalFormViewer_Lock(); setActiveController_Lock(xNewController); return; } URL aClearURL; aClearURL.Complete = FMURL_GRIDVIEW_CLEARVIEW; Reference< css::frame::XDispatch> xClear( xCommLink->queryDispatch(aClearURL, OUString(), 0)); if (xClear.is()) xClear->dispatch(aClearURL, Sequence< PropertyValue>()); } // TODO: We need an interceptor at the xSupplier, which forwards all queryDispatch requests to the FormController // instance for which this "external view" was triggered // get the dispatch interface of the frame so we can communicate (interceptable) with the controller Reference< css::frame::XDispatchProvider> xCommLink(xExternalViewFrame, UNO_QUERY); if (m_xExternalViewController.is()) { DBG_ASSERT(xCommLink.is(), "FmXFormShell::CreateExternalView : the component doesn't have the necessary interfaces !"); // collect the dispatchers we will need URL aAddColumnURL; aAddColumnURL.Complete = FMURL_GRIDVIEW_ADDCOLUMN; Reference< css::frame::XDispatch> xAddColumnDispatch( xCommLink->queryDispatch(aAddColumnURL, OUString(), 0)); URL aAttachURL; aAttachURL.Complete = FMURL_GRIDVIEW_ATTACHTOFORM; Reference< css::frame::XDispatch> xAttachDispatch( xCommLink->queryDispatch(aAttachURL, OUString(), 0)); if (xAddColumnDispatch.is() && xAttachDispatch.is()) { DBG_ASSERT(xCurrentNavController.is(), "FmXFormShell::CreateExternalView : invalid call : have no nav controller !"); // first : dispatch the descriptions for the columns to add sal_Int16 nAddedColumns = 0; // for radio buttons we need some special structures typedef std::map< OUString, Sequence< OUString> > MapUString2UstringSeq; typedef std::map< OUString, OUString > FmMapUString2UString; typedef std::map< OUString, sal_Int16 > FmMapUString2Int16; MapUString2UstringSeq aRadioValueLists; MapUString2UstringSeq aRadioListSources; FmMapUString2UString aRadioControlSources; FmMapUString2Int16 aRadioPositions; FmXBoundFormFieldIterator aModelIterator(xCurrentNavController->getModel()); Reference< XPropertySet> xCurrentModelSet; OUString sColumnType,aGroupName,sControlSource; Sequence< Property> aProps; while ((xCurrentModelSet = Reference< XPropertySet>(aModelIterator.Next(), UNO_QUERY)).is()) { OSL_ENSURE(xCurrentModelSet.is(),"xCurrentModelSet is null!"); // create a description of the column to be created // first : determine it's type sal_Int16 nClassId = ::comphelper::getINT16(xCurrentModelSet->getPropertyValue(FM_PROP_CLASSID)); switch (nClassId) { case FormComponentType::RADIOBUTTON: { // get the label of the button (this is the access key for our structures) aGroupName = getLabelName(xCurrentModelSet); // add the reference value of the radio button to the list source sequence Sequence< OUString>& aThisGroupLabels = aRadioListSources[aGroupName]; sal_Int32 nNewSizeL = aThisGroupLabels.getLength() + 1; aThisGroupLabels.realloc(nNewSizeL); aThisGroupLabels.getArray()[nNewSizeL - 1] = ::comphelper::getString(xCurrentModelSet->getPropertyValue(FM_PROP_REFVALUE)); // add the label to the value list sequence Sequence< OUString>& aThisGroupControlSources = aRadioValueLists[aGroupName]; sal_Int32 nNewSizeC = aThisGroupControlSources.getLength() + 1; aThisGroupControlSources.realloc(nNewSizeC); aThisGroupControlSources.getArray()[nNewSizeC - 1] = ::comphelper::getString(xCurrentModelSet->getPropertyValue(FM_PROP_LABEL)); // remember the controls source of the radio group sControlSource = ::comphelper::getString(xCurrentModelSet->getPropertyValue(FM_PROP_CONTROLSOURCE)); if (aRadioControlSources.find(aGroupName) == aRadioControlSources.end()) aRadioControlSources[aGroupName] = sControlSource; #ifdef DBG_UTIL else DBG_ASSERT(aRadioControlSources[aGroupName] == sControlSource, "FmXFormShell::CreateExternalView : inconsistent radio buttons detected !"); // (radio buttons with the same name should have the same control source) #endif // remember the position within the columns if (aRadioPositions.find(aGroupName) == aRadioPositions.end()) aRadioPositions[aGroupName] = nAddedColumns; // any further handling is done below } continue; case FormComponentType::IMAGECONTROL: case FormComponentType::CONTROL: // no grid columns for these types (though they have a control source) continue; case FormComponentType::CHECKBOX: sColumnType = FM_COL_CHECKBOX; break; case FormComponentType::LISTBOX: sColumnType = FM_COL_LISTBOX; break; case FormComponentType::COMBOBOX: sColumnType = FM_COL_COMBOBOX; break; case FormComponentType::DATEFIELD: sColumnType = FM_COL_DATEFIELD; break; case FormComponentType::TIMEFIELD: sColumnType = FM_COL_TIMEFIELD; break; case FormComponentType::NUMERICFIELD: sColumnType = FM_COL_NUMERICFIELD; break; case FormComponentType::CURRENCYFIELD: sColumnType = FM_COL_CURRENCYFIELD; break; case FormComponentType::PATTERNFIELD: sColumnType = FM_COL_PATTERNFIELD; break; case FormComponentType::TEXTFIELD: { sColumnType = FM_COL_TEXTFIELD; // we know at least two different controls which are TextFields : the basic edit field and the formatted // field. we distinguish them by their service name Reference< lang::XServiceInfo> xInfo(xCurrentModelSet, UNO_QUERY); if (xInfo.is()) { sal_Int16 nObjectType = getControlTypeByObject(xInfo); if (OBJ_FM_FORMATTEDFIELD == nObjectType) sColumnType = FM_COL_FORMATTEDFIELD; } } break; default: sColumnType = FM_COL_TEXTFIELD; break; } const sal_Int16 nDispatchArgs = 3; Sequence< PropertyValue> aDispatchArgs(nDispatchArgs); PropertyValue* pDispatchArgs = aDispatchArgs.getArray(); // properties describing "meta data" about the column // the type pDispatchArgs->Name = FMARG_ADDCOL_COLUMNTYPE; pDispatchArgs->Value <<= sColumnType; ++pDispatchArgs; // the pos : append the col pDispatchArgs->Name = FMARG_ADDCOL_COLUMNPOS; pDispatchArgs->Value <<= nAddedColumns; ++pDispatchArgs; // the properties to forward to the new column Sequence< PropertyValue> aColumnProps(1); PropertyValue* pColumnProps = aColumnProps.getArray(); // the label pColumnProps->Name = FM_PROP_LABEL; pColumnProps->Value <<= getLabelName(xCurrentModelSet); ++pColumnProps; // for all other props : transfer them Reference< XPropertySetInfo> xControlModelInfo( xCurrentModelSet->getPropertySetInfo()); DBG_ASSERT(xControlModelInfo.is(), "FmXFormShell::CreateExternalView : the control model has no property info ! This will crash !"); aProps = xControlModelInfo->getProperties(); const Property* pProps = aProps.getConstArray(); // realloc the control description sequence sal_Int32 nExistentDescs = pColumnProps - aColumnProps.getArray(); aColumnProps.realloc(nExistentDescs + aProps.getLength()); pColumnProps = aColumnProps.getArray() + nExistentDescs; for (sal_Int32 i=0; iName == FM_PROP_LABEL) // already set continue; if (pProps->Name == FM_PROP_DEFAULTCONTROL) // allow the column's own "default control" continue; if (pProps->Attributes & PropertyAttribute::READONLY) // assume that properties which are readonly for the control are ro for the column to be created, too continue; pColumnProps->Name = pProps->Name; pColumnProps->Value = xCurrentModelSet->getPropertyValue(pProps->Name); ++pColumnProps; } aColumnProps.realloc(pColumnProps - aColumnProps.getArray()); // columns props are a dispatch argument pDispatchArgs->Name = "ColumnProperties"; // TODO : fmurl.* pDispatchArgs->Value <<= aColumnProps; ++pDispatchArgs; DBG_ASSERT(nDispatchArgs == (pDispatchArgs - aDispatchArgs.getConstArray()), "FmXFormShell::CreateExternalView : forgot to adjust nDispatchArgs ?"); // dispatch the "add column" xAddColumnDispatch->dispatch(aAddColumnURL, aDispatchArgs); ++nAddedColumns; } // now for the radio button handling sal_Int16 nOffset(0); // properties describing the "direct" column properties const sal_Int16 nListBoxDescription = 6; Sequence< PropertyValue> aListBoxDescription(nListBoxDescription); for (const auto& rCtrlSource : aRadioControlSources) { PropertyValue* pListBoxDescription = aListBoxDescription.getArray(); // label pListBoxDescription->Name = FM_PROP_LABEL; pListBoxDescription->Value <<= rCtrlSource.first; ++pListBoxDescription; // control source pListBoxDescription->Name = FM_PROP_CONTROLSOURCE; pListBoxDescription->Value <<= rCtrlSource.second; ++pListBoxDescription; // bound column pListBoxDescription->Name = FM_PROP_BOUNDCOLUMN; pListBoxDescription->Value <<= sal_Int16(1); ++pListBoxDescription; // content type pListBoxDescription->Name = FM_PROP_LISTSOURCETYPE; pListBoxDescription->Value <<= ListSourceType_VALUELIST; ++pListBoxDescription; // list source MapUString2UstringSeq::const_iterator aCurrentListSource = aRadioListSources.find(rCtrlSource.first); DBG_ASSERT(aCurrentListSource != aRadioListSources.end(), "FmXFormShell::CreateExternalView : inconsistent radio descriptions !"); pListBoxDescription->Name = FM_PROP_LISTSOURCE; pListBoxDescription->Value <<= (*aCurrentListSource).second; ++pListBoxDescription; // value list MapUString2UstringSeq::const_iterator aCurrentValueList = aRadioValueLists.find(rCtrlSource.first); DBG_ASSERT(aCurrentValueList != aRadioValueLists.end(), "FmXFormShell::CreateExternalView : inconsistent radio descriptions !"); pListBoxDescription->Name = FM_PROP_STRINGITEMLIST; pListBoxDescription->Value <<= (*aCurrentValueList).second; ++pListBoxDescription; DBG_ASSERT(nListBoxDescription == (pListBoxDescription - aListBoxDescription.getConstArray()), "FmXFormShell::CreateExternalView : forgot to adjust nListBoxDescription ?"); // properties describing the column "meta data" const sal_Int16 nDispatchArgs = 3; Sequence< PropertyValue> aDispatchArgs(nDispatchArgs); PropertyValue* pDispatchArgs = aDispatchArgs.getArray(); // column type : listbox pDispatchArgs->Name = FMARG_ADDCOL_COLUMNTYPE; OUString fColName = FM_COL_LISTBOX; pDispatchArgs->Value <<= fColName; // pDispatchArgs->Value <<= (OUString)FM_COL_LISTBOX; ++pDispatchArgs; // column position pDispatchArgs->Name = FMARG_ADDCOL_COLUMNPOS; FmMapUString2Int16::const_iterator aOffset = aRadioPositions.find(rCtrlSource.first); DBG_ASSERT(aOffset != aRadioPositions.end(), "FmXFormShell::CreateExternalView : inconsistent radio descriptions !"); sal_Int16 nPosition = (*aOffset).second; nPosition = nPosition + nOffset; // we already inserted nOffset additional columns .... pDispatchArgs->Value <<= nPosition; ++pDispatchArgs; // the pDispatchArgs->Name = "ColumnProperties"; // TODO : fmurl.* pDispatchArgs->Value <<= aListBoxDescription; ++pDispatchArgs; DBG_ASSERT(nDispatchArgs == (pDispatchArgs - aDispatchArgs.getConstArray()), "FmXFormShell::CreateExternalView : forgot to adjust nDispatchArgs ?"); // dispatch the "add column" xAddColumnDispatch->dispatch(aAddColumnURL, aDispatchArgs); ++nAddedColumns; ++nOffset; } DBG_ASSERT(nAddedColumns > 0, "FmXFormShell::CreateExternalView : no controls (inconsistent) !"); // we should have checked if we have any usable controls (see above). // "load" the "form" of the external view PropertyValue aArg; aArg.Name = FMARG_ATTACHTO_MASTERFORM; Reference< XResultSet> xForm(xCurrentNavController->getModel(), UNO_QUERY); aArg.Value <<= xForm; m_xExternalDisplayedForm = xForm; // do this before dispatching the "attach" command, as the attach may result in a call to our queryDispatch (for the FormSlots) // which needs the m_xExternalDisplayedForm xAttachDispatch->dispatch(aAttachURL, Sequence< PropertyValue>(&aArg, 1)); m_xExtViewTriggerController = xCurrentNavController; // we want to know modifications done in the external view // if the external controller is a XFormController we can use all our default handlings for it Reference< runtime::XFormController > xFormController( m_xExternalViewController, UNO_QUERY ); OSL_ENSURE( xFormController.is(), "FmXFormShell::CreateExternalView:: invalid external view controller!" ); if (xFormController.is()) xFormController->addActivateListener(static_cast(this)); } } #ifdef DBG_UTIL else { OSL_FAIL("FmXFormShell::CreateExternalView : could not create the external form view !"); } #endif InvalidateSlot_Lock(SID_FM_VIEW_AS_GRID, false); } void FmXFormShell::implAdjustConfigCache_Lock() { // get (cache) the wizard usage flag Sequence< OUString > aNames { "FormControlPilotsEnabled" }; Sequence< Any > aFlags = GetProperties(aNames); if (1 == aFlags.getLength()) m_bUseWizards = ::cppu::any2bool(aFlags[0]); } void FmXFormShell::Notify( const css::uno::Sequence< OUString >& _rPropertyNames) { DBG_TESTSOLARMUTEX(); if (impl_checkDisposed_Lock()) return; const OUString* pSearch = _rPropertyNames.getConstArray(); const OUString* pSearchTil = pSearch + _rPropertyNames.getLength(); for (;pSearch < pSearchTil; ++pSearch) if (*pSearch == "FormControlPilotsEnabled") { implAdjustConfigCache_Lock(); InvalidateSlot_Lock(SID_FM_USE_WIZARDS, true); } } void FmXFormShell::ImplCommit() { } void FmXFormShell::SetWizardUsing_Lock(bool _bUseThem) { m_bUseWizards = _bUseThem; Sequence< OUString > aNames { "FormControlPilotsEnabled" }; Sequence< Any > aValues(1); aValues[0] <<= m_bUseWizards; PutProperties(aNames, aValues); } void FmXFormShell::viewDeactivated_Lock(FmFormView& _rCurrentView, bool _bDeactivateController) { if ( _rCurrentView.GetImpl() && !_rCurrentView.IsDesignMode() ) { _rCurrentView.GetImpl()->Deactivate( _bDeactivateController ); } // if we have an async load operation pending for the 0-th page for this view, // we need to cancel this if (FmFormPage* pPage = _rCurrentView.GetCurPage()) { // move all events from our queue to a new one, omit the events for the deactivated // page ::std::queue< FmLoadAction > aNewEvents; while ( !m_aLoadingPages.empty() ) { FmLoadAction aAction = m_aLoadingPages.front(); m_aLoadingPages.pop(); if ( pPage != aAction.pPage ) { aNewEvents.push( aAction ); } else { Application::RemoveUserEvent( aAction.nEventId ); } } m_aLoadingPages = aNewEvents; // remove callbacks at the page pPage->GetImpl().SetFormsCreationHdl( Link() ); } UpdateForms_Lock(true); } IMPL_LINK_NOARG( FmXFormShell, OnFirstTimeActivation_Lock, void*, void ) { if (impl_checkDisposed_Lock()) return; m_nActivationEvent = nullptr; SfxObjectShell* pDocument = m_pShell->GetObjectShell(); if ( pDocument && !pDocument->HasName() ) { if (isEnhancedForm_Lock()) { // show the data navigator if ( !m_pShell->GetViewShell()->GetViewFrame()->HasChildWindow( SID_FM_SHOW_DATANAVIGATOR ) ) m_pShell->GetViewShell()->GetViewFrame()->ToggleChildWindow( SID_FM_SHOW_DATANAVIGATOR ); } } } IMPL_LINK_NOARG( FmXFormShell, OnFormsCreated_Lock, FmFormPageImpl&, void ) { UpdateForms_Lock(true); } void FmXFormShell::viewActivated_Lock(FmFormView& _rCurrentView, bool _bSyncAction) { FmFormPage* pPage = _rCurrentView.GetCurPage(); // activate our view if we are activated ourself // FS - 30.06.99 - 67308 if ( _rCurrentView.GetImpl() && !_rCurrentView.IsDesignMode() ) { // load forms for the page the current view belongs to if ( pPage ) { if ( !pPage->GetImpl().hasEverBeenActivated() ) loadForms_Lock(pPage, LoadFormsFlags::Load | (_bSyncAction ? LoadFormsFlags::Sync : LoadFormsFlags::Async)); pPage->GetImpl().setHasBeenActivated( ); } // first-time initializations for the views if ( !_rCurrentView.GetImpl()->hasEverBeenActivated( ) ) { _rCurrentView.GetImpl()->onFirstViewActivation( dynamic_cast( _rCurrentView.GetModel() ) ); _rCurrentView.GetImpl()->setHasBeenActivated( ); } // activate the current view _rCurrentView.GetImpl()->Activate( _bSyncAction ); } // set callbacks at the page if ( pPage ) { pPage->GetImpl().SetFormsCreationHdl(LINK(this, FmXFormShell, OnFormsCreated_Lock)); } UpdateForms_Lock(true); if ( m_bFirstActivation ) { m_nActivationEvent = Application::PostUserEvent(LINK(this, FmXFormShell, OnFirstTimeActivation_Lock)); m_bFirstActivation = false; } // find a default "current form", if there is none, yet // #i88186# / 2008-04-12 / frank.schoenheit@sun.com impl_defaultCurrentForm_nothrow_Lock(); } void FmXFormShell::impl_defaultCurrentForm_nothrow_Lock() { if (impl_checkDisposed_Lock()) return; if ( m_xCurrentForm.is() ) // no action required return; FmFormView* pFormView = m_pShell->GetFormView(); FmFormPage* pPage = pFormView ? pFormView->GetCurPage() : nullptr; if ( !pPage ) return; try { Reference< XIndexAccess > xForms( pPage->GetForms( false ), UNO_QUERY ); if ( !xForms.is() || !xForms->hasElements() ) return; Reference< XForm > xNewCurrentForm( xForms->getByIndex(0), UNO_QUERY_THROW ); impl_updateCurrentForm_Lock(xNewCurrentForm); } catch( const Exception& ) { DBG_UNHANDLED_EXCEPTION("svx"); } } void FmXFormShell::smartControlReset( const Reference< XIndexAccess >& _rxModels ) { if (!_rxModels.is()) { OSL_FAIL("FmXFormShell::smartControlReset: invalid container!"); return; } static const OUString sClassIdPropertyName = FM_PROP_CLASSID; static const OUString sBoundFieldPropertyName = FM_PROP_BOUNDFIELD; sal_Int32 nCount = _rxModels->getCount(); Reference< XPropertySet > xCurrent; Reference< XPropertySetInfo > xCurrentInfo; Reference< XPropertySet > xBoundField; for (sal_Int32 i=0; igetByIndex(i) >>= xCurrent; if (xCurrent.is()) xCurrentInfo = xCurrent->getPropertySetInfo(); else xCurrentInfo.clear(); if (!xCurrentInfo.is()) continue; if (xCurrentInfo->hasPropertyByName(sClassIdPropertyName)) { // it's a control model // check if this control is bound to a living database field if (xCurrentInfo->hasPropertyByName(sBoundFieldPropertyName)) xCurrent->getPropertyValue(sBoundFieldPropertyName) >>= xBoundField; else xBoundField.clear(); // reset only if it's *not* bound bool bReset = !xBoundField.is(); // and additionally, check if it has an external value binding Reference< XBindableValue > xBindable( xCurrent, UNO_QUERY ); if ( xBindable.is() && xBindable->getValueBinding().is() ) bReset = false; if ( bReset ) { Reference< XReset > xControlReset( xCurrent, UNO_QUERY ); if ( xControlReset.is() ) xControlReset->reset(); } } else { Reference< XIndexAccess > xContainer(xCurrent, UNO_QUERY); if (xContainer.is()) smartControlReset(xContainer); } } } IMPL_LINK_NOARG( FmXFormShell, OnLoadForms_Lock, void*, void ) { FmLoadAction aAction = m_aLoadingPages.front(); m_aLoadingPages.pop(); loadForms_Lock(aAction.pPage, aAction.nFlags & ~LoadFormsFlags::Async); } namespace { bool lcl_isLoadable( const Reference< XInterface >& _rxLoadable ) { // determines whether a form should be loaded or not // if there is no datasource or connection there is no reason to load a form Reference< XPropertySet > xSet( _rxLoadable, UNO_QUERY ); if ( !xSet.is() ) return false; try { Reference< XConnection > xConn; if ( isEmbeddedInDatabase( _rxLoadable.get(), xConn ) ) return true; // is there already a active connection xSet->getPropertyValue(FM_PROP_ACTIVE_CONNECTION) >>= xConn; if ( xConn.is() ) return true; OUString sPropertyValue; OSL_VERIFY( xSet->getPropertyValue( FM_PROP_DATASOURCE ) >>= sPropertyValue ); if ( !sPropertyValue.isEmpty() ) return true; OSL_VERIFY( xSet->getPropertyValue( FM_PROP_URL ) >>= sPropertyValue ); if ( !sPropertyValue.isEmpty() ) return true; } catch(const Exception&) { DBG_UNHANDLED_EXCEPTION("svx"); } return false; } } void FmXFormShell::loadForms_Lock(FmFormPage* _pPage, const LoadFormsFlags _nBehaviour /* LoadFormsFlags::Load | LoadFormsFlags::Sync */) { DBG_ASSERT( ( _nBehaviour & ( LoadFormsFlags::Async | LoadFormsFlags::Unload ) ) != ( LoadFormsFlags::Async | LoadFormsFlags::Unload ), "FmXFormShell::loadForms: async loading not supported - this will heavily fail!" ); if ( _nBehaviour & LoadFormsFlags::Async ) { m_aLoadingPages.push( FmLoadAction( _pPage, _nBehaviour, Application::PostUserEvent(LINK(this, FmXFormShell, OnLoadForms_Lock), _pPage) ) ); return; } DBG_ASSERT( _pPage, "FmXFormShell::loadForms: invalid page!" ); if ( _pPage ) { // lock the undo env so the forms can change non-transient properties while loading // (without this my doc's modified flag would be set) FmFormModel& rFmFormModel(dynamic_cast< FmFormModel& >(_pPage->getSdrModelFromSdrPage())); rFmFormModel.GetUndoEnv().Lock(); // load all forms Reference< XIndexAccess > xForms; xForms.set(_pPage->GetForms( false ), css::uno::UNO_QUERY); if ( xForms.is() ) { Reference< XLoadable > xForm; for ( sal_Int32 j = 0, nCount = xForms->getCount(); j < nCount; ++j ) { xForms->getByIndex( j ) >>= xForm; bool bFormWasLoaded = false; // a database form must be loaded for try { if ( !( _nBehaviour & LoadFormsFlags::Unload ) ) { if ( lcl_isLoadable( xForm ) && !xForm->isLoaded() ) xForm->load(); } else { if ( xForm->isLoaded() ) { bFormWasLoaded = true; xForm->unload(); } } } catch( const Exception& ) { DBG_UNHANDLED_EXCEPTION("svx"); } // reset the form if it was loaded if ( bFormWasLoaded ) { Reference< XIndexAccess > xContainer( xForm, UNO_QUERY ); DBG_ASSERT( xContainer.is(), "FmXFormShell::loadForms: the form is no container!" ); if ( xContainer.is() ) smartControlReset( xContainer ); } } } // unlock the environment rFmFormModel.GetUndoEnv().UnLock(); } } void FmXFormShell::ExecuteTextAttribute_Lock(SfxRequest& _rReq) { DBG_TESTSOLARMUTEX(); m_pTextShell->ExecuteTextAttribute( _rReq ); } void FmXFormShell::GetTextAttributeState_Lock(SfxItemSet& _rSet) { DBG_TESTSOLARMUTEX(); m_pTextShell->GetTextAttributeState( _rSet ); } bool FmXFormShell::IsActiveControl_Lock(bool _bCountRichTextOnly ) const { DBG_TESTSOLARMUTEX(); return m_pTextShell->IsActiveControl( _bCountRichTextOnly ); } void FmXFormShell::ForgetActiveControl_Lock() { DBG_TESTSOLARMUTEX(); m_pTextShell->ForgetActiveControl(); } void FmXFormShell::SetControlActivationHandler_Lock(const Link& _rHdl) { DBG_TESTSOLARMUTEX(); m_pTextShell->SetControlActivationHandler( _rHdl ); } void FmXFormShell::handleShowPropertiesRequest_Lock() { if (onlyControlsAreMarked_Lock()) ShowSelectionProperties_Lock( true ); } void FmXFormShell::handleMouseButtonDown_Lock(const SdrViewEvent& _rViewEvent) { // catch simple double clicks if ( ( _rViewEvent.nMouseClicks == 2 ) && ( _rViewEvent.nMouseCode == MOUSE_LEFT ) ) { if ( _rViewEvent.eHit == SdrHitKind::MarkedObject ) { if (onlyControlsAreMarked_Lock()) ShowSelectionProperties_Lock( true ); } } } bool FmXFormShell::HasControlFocus_Lock() const { bool bHasControlFocus = false; try { Reference xController(getActiveController_Lock()); Reference< XControl > xCurrentControl; if ( xController.is() ) xCurrentControl.set( xController->getCurrentControl() ); if ( xCurrentControl.is() ) { Reference< XWindow2 > xPeerWindow( xCurrentControl->getPeer(), UNO_QUERY_THROW ); bHasControlFocus = xPeerWindow->hasFocus(); } } catch( const Exception& ) { DBG_UNHANDLED_EXCEPTION("svx"); } return bHasControlFocus; } SearchableControlIterator::SearchableControlIterator(Reference< XInterface> const & xStartingPoint) :IndexAccessIterator(xStartingPoint) { } bool SearchableControlIterator::ShouldHandleElement(const Reference< XInterface>& xElement) { // if the thing has a ControlSource and a BoundField property Reference< XPropertySet> xProperties(xElement, UNO_QUERY); if (::comphelper::hasProperty(FM_PROP_CONTROLSOURCE, xProperties) && ::comphelper::hasProperty(FM_PROP_BOUNDFIELD, xProperties)) { // and the BoundField is valid Reference< XPropertySet> xField; xProperties->getPropertyValue(FM_PROP_BOUNDFIELD) >>= xField; if (xField.is()) { // we take it m_sCurrentValue = ::comphelper::getString(xProperties->getPropertyValue(FM_PROP_CONTROLSOURCE)); return true; } } // if it is a grid control if (::comphelper::hasProperty(FM_PROP_CLASSID, xProperties)) { Any aClassId( xProperties->getPropertyValue(FM_PROP_CLASSID) ); if (::comphelper::getINT16(aClassId) == FormComponentType::GRIDCONTROL) { m_sCurrentValue.clear(); return true; } } return false; } bool SearchableControlIterator::ShouldStepInto(const Reference< XInterface>& /*xContainer*/) const { return true; } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */