/*************************************************************************
*
* $RCSfile: fmpgeimp.hxx,v $
*
* $Revision: 1.10 $
*
* last change: $Author: vg $ $Date: 2005-02-17 10:58:06 $
*
* The Contents of this file are made available subject to the terms of
* either of the following licenses
*
* - GNU Lesser General Public License Version 2.1
* - Sun Industry Standards Source License Version 1.1
*
* Sun Microsystems Inc., October, 2000
*
* GNU Lesser General Public License Version 2.1
* =============================================
* Copyright 2000 by Sun Microsystems, Inc.
* 901 San Antonio Road, Palo Alto, CA 94303, USA
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2.1, as published by the Free Software Foundation.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*
* Sun Industry Standards Source License Version 1.1
* =================================================
* The contents of this file are subject to the Sun Industry Standards
* Source License Version 1.1 (the "License"); You may not use this file
* except in compliance with the License. You may obtain a copy of the
* License at http://www.openoffice.org/license.html.
*
* Software provided under this License is provided on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
* WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
* MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
* See the License for the specific provisions governing your rights and
* obligations concerning the Software.
*
* The Initial Developer of the Original Code is: Sun Microsystems, Inc.
*
* Copyright: 2000 by Sun Microsystems, Inc.
*
* All Rights Reserved.
*
* Contributor(s): _______________________________________
*
*
************************************************************************/
#ifndef _SVX_FMUNOPGE_HXX
#define _SVX_FMUNOPGE_HXX
#ifndef _COM_SUN_STAR_SDBC_XDATASOURCE_HPP_
#include <com/sun/star/sdbc/XDataSource.hpp>
#endif
#ifndef _COM_SUN_STAR_CONTAINER_XNAMEACCESS_HPP_
#include <com/sun/star/container/XNameAccess.hpp>
#endif
#ifndef _COM_SUN_STAR_FORM_XFORMCOMPONENT_HPP_
#include <com/sun/star/form/XFormComponent.hpp>
#endif
#ifndef _COM_SUN_STAR_FORM_XFORM_HPP_
#include <com/sun/star/form/XForm.hpp>
#endif
#ifndef _COM_SUN_STAR_CONTAINER_XNAMECONTAINER_HPP_
#include <com/sun/star/container/XNameContainer.hpp>
#endif
#ifndef _COM_SUN_STAR_FRAME_XMODEL_HPP_
#include <com/sun/star/frame/XModel.hpp>
#endif
#ifndef _COM_SUN_STAR_LANG_XSERVICEINFO_HPP_
#include <com/sun/star/lang/XServiceInfo.hpp>
#endif
#ifndef _LIST_HXX //autogen
#include <tools/list.hxx>
#endif
#ifndef _COMPHELPER_UNO3_HXX_
#include <comphelper/uno3.hxx>
#endif
class SvStream;
//BFS01class SdrIOHeader;
class FmFormObj;
class SdrObject;
//FORWARD_DECLARE_INTERFACE(uno,Reference)
FORWARD_DECLARE_INTERFACE(io,XObjectOutputStream)
FORWARD_DECLARE_INTERFACE(io,XObjectInputStream)
FORWARD_DECLARE_INTERFACE(container,XIndexContainer)
class SdrObjList;
DECLARE_LIST(FmObjectList, FmFormObj*);
//==================================================================
// FmFormPageImpl
// lauscht an allen Containern, um festzustellen, wann Objecte
// eingefuegt worden sind und wann diese entfernt wurden
//==================================================================
class FmFormPageImpl
{
friend class FmFormPage;
friend class FmFormObj;
friend class FmXFormShell;
::com::sun::star::uno::Reference< ::com::sun::star::form::XForm> xCurrentForm; // aktuelles Formular
::com::sun::star::uno::Reference< ::com::sun::star::container::XNameContainer> xForms; // Liste aller Forms
::com::sun::star::uno::Reference< ::com::sun::star::frame::XModel> xModel;
FmFormPage* pPage;
sal_Bool m_bFirstActivation : 1;
protected:
FmFormPageImpl(FmFormPage* _pPage);
FmFormPageImpl(FmFormPage* _pPage, const FmFormPageImpl& rImpl);
~FmFormPageImpl();
void Init();
public:
// nur wichtig fuer den DesignMode
void setCurForm(::com::sun::star::uno::Reference< ::com::sun::star::form::XForm> xForm);
::com::sun::star::uno::Reference< ::com::sun::star::form::XForm> getDefaultForm();
// Defaults fuer ein Object setzen
// Eindeutigen Namen, Zuordnen zu einer Form falls noch nicht erfolgt
::com::sun::star::uno::Reference< ::com::sun::star::form::XForm> SetDefaults(const ::com::sun::star::uno::Reference< ::com::sun::star::form::XFormComponent>& rContent,
const ::com::sun::star::uno::Reference< ::com::sun::star::sdbc::XDataSource>& rDatabase = ::com::sun::star::uno::Reference< ::com::sun::star::sdbc::XDataSource>(),
const ::rtl::OUString& rDBTitle = ::rtl::OUString(),
const ::rtl::OUString& rCursorSource = ::rtl::OUString(),
sal_Int32 nCommandType = 0);
// activation handling
inline sal_Bool hasEverBeenActivated( ) const { return !m_bFirstActivation; }
inline void setHasBeenActivated( ) { m_bFirstActivation = sal_False; }
protected:
// lesen und schreiben der Objecte
//BFS01 void WriteData(SvStream& rOut) const; //
//BFS01 void ReadData(const SdrIOHeader& rHead, SvStream& rIn); //
void write(const ::com::sun::star::uno::Reference< ::com::sun::star::io::XObjectOutputStream>& OutStream) const;
void read(const ::com::sun::star::uno::Reference< ::com::sun::star::io::XObjectInputStream>& InStream);
const ::com::sun::star::uno::Reference< ::com::sun::star::container::XNameContainer>& getForms() {return xForms;}
void fillList(FmObjectList& rList, const SdrObjList& rObjList, sal_Bool bConnected) const;
::com::sun::star::uno::Reference< ::com::sun::star::form::XForm> FindForm(const ::com::sun::star::uno::Reference< ::com::sun::star::form::XForm>& rForm,
const ::com::sun::star::uno::Reference< ::com::sun::star::sdbc::XDataSource>& rDatabase,
const ::rtl::OUString& rCursorSource,
sal_Int32 nCommandType);
::rtl::OUString getDefaultName(
sal_Int16 _nClassId,
const ::com::sun::star::uno::Reference< ::com::sun::star::form::XForm>& _rxControls,
const ::com::sun::star::uno::Reference< ::com::sun::star::lang::XServiceInfo >& _rxObject
) const;
private:
/** validates whether <member>xCurrentForm</member> is still valid and to be used
There are situations where our current form becomes invalid, without us noticing this. Thus,
every method which accesses <member>xCurrentForm</member> should beforehand validate the current
form by calling this method.
If <member>xCurrentForm</member> is not valid anymore, it is reset to <NULL/>.
@since #i40086#
*/
void validateCurForm();
public:
static UniString getDefaultName(
sal_Int16 nClassId,
const ::com::sun::star::uno::Reference< ::com::sun::star::lang::XServiceInfo >& _rxObject
);
::rtl::OUString setUniqueName(const ::com::sun::star::uno::Reference< ::com::sun::star::form::XFormComponent>& xFormComponent, const ::com::sun::star::uno::Reference< ::com::sun::star::form::XForm>& xControls);
::rtl::OUString getUniqueName(const ::rtl::OUString& rName, const ::com::sun::star::uno::Reference< ::com::sun::star::container::XNameAccess>& xNamedSet) const;
};
#endif // _SVX_FMUNOPGE_HXX