/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <svx/svxitems.hrc>
#include <tools/stream.hxx>
#include <tools/mapunit.hxx>
#include <com/sun/star/table/BorderLine.hpp>
#include <com/sun/star/table/ShadowLocation.hpp>
#include <com/sun/star/table/TableBorder.hpp>
#include <com/sun/star/table/ShadowFormat.hpp>
#include <com/sun/star/table/CellRangeAddress.hpp>
#include <com/sun/star/table/CellContentType.hpp>
#include <com/sun/star/table/TableOrientation.hpp>
#include <com/sun/star/util/SortField.hpp>
#include <com/sun/star/util/SortFieldType.hpp>
#include <com/sun/star/table/CellOrientation.hpp>
#include <com/sun/star/table/CellAddress.hpp>
#include <svx/algitem.hxx>
#include <svx/dialmgr.hxx>
#include <editeng/itemtype.hxx>
#include <svx/unomid.hxx>
using namespace ::rtl;
using namespace ::com::sun::star;
TYPEINIT1_FACTORY( SvxOrientationItem, SfxEnumItem, new SvxOrientationItem(SVX_ORIENTATION_STANDARD, 0) );
TYPEINIT1_FACTORY( SvxMarginItem, SfxPoolItem, new SvxMarginItem(0) );
// class SvxOrientationItem ----------------------------------------------
SvxOrientationItem::SvxOrientationItem( const SvxCellOrientation eOrientation,
const sal_uInt16 nId):
SfxEnumItem( nId, (sal_uInt16)eOrientation )
{
}
SvxOrientationItem::SvxOrientationItem( sal_Int32 nRotation, bool bStacked, const sal_uInt16 nId ) :
SfxEnumItem( nId )
{
SetFromRotation( nRotation, bStacked );
}
SfxItemPresentation SvxOrientationItem::GetPresentation
(
SfxItemPresentation ePres,
SfxMapUnit /*eCoreUnit*/,
SfxMapUnit /*ePresUnit*/,
OUString& rText, const IntlWrapper * ) const
{
switch ( ePres )
{
case SFX_ITEM_PRESENTATION_NONE:
rText = OUString();
return SFX_ITEM_PRESENTATION_NONE;
case SFX_ITEM_PRESENTATION_NAMELESS:
case SFX_ITEM_PRESENTATION_COMPLETE:
rText = GetValueText( GetValue() );
return SFX_ITEM_PRESENTATION_COMPLETE;
default: ; //prevent warning
}
return SFX_ITEM_PRESENTATION_NONE;
}
bool SvxOrientationItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/ ) const
{
table::CellOrientation eUno = table::CellOrientation_STANDARD;
switch ( (SvxCellOrientation)GetValue() )
{
case SVX_ORIENTATION_STANDARD: eUno = table::CellOrientation_STANDARD; break;
case SVX_ORIENTATION_TOPBOTTOM: eUno = table::CellOrientation_TOPBOTTOM; break;
case SVX_ORIENTATION_BOTTOMTOP: eUno = table::CellOrientation_BOTTOMTOP; break;
case SVX_ORIENTATION_STACKED: eUno = table::CellOrientation_STACKED; break;
}
rVal <<= eUno;
return true;
}
bool SvxOrientationItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/ )
{
table::CellOrientation eOrient;
if(!(rVal >>= eOrient))
{
sal_Int32 nValue = 0;
if(!(rVal >>= nValue))
return false;
eOrient = (table::CellOrientation)nValue;
}
SvxCellOrientation eSvx = SVX_ORIENTATION_STANDARD;
switch (eOrient)
{
case table::CellOrientation_STANDARD: eSvx = SVX_ORIENTATION_STANDARD; break;
case table::CellOrientation_TOPBOTTOM: eSvx = SVX_ORIENTATION_TOPBOTTOM; break;
case table::CellOrientation_BOTTOMTOP: eSvx = SVX_ORIENTATION_BOTTOMTOP; break;
case table::CellOrientation_STACKED: eSvx = SVX_ORIENTATION_STACKED; break;
default: ; //prevent warning
}
SetValue( (sal_uInt16)eSvx );
return true;
}
OUString SvxOrientationItem::GetValueText( sal_uInt16 nVal ) const
{
DBG_ASSERT( nVal <= SVX_ORIENTATION_STACKED, "enum overflow!" );
return SVX_RESSTR(RID_SVXITEMS_ORI_STANDARD + nVal);
}
SfxPoolItem* SvxOrientationItem::Clone( SfxItemPool* ) const
{
return new SvxOrientationItem( *this );
}
SfxPoolItem* SvxOrientationItem::Create( SvStream& rStream, sal_uInt16 ) const
{
sal_uInt16 nVal;
rStream.ReadUInt16( nVal );
return new SvxOrientationItem( (SvxCellOrientation)nVal, Which() );
}
sal_uInt16 SvxOrientationItem::GetValueCount() const
{
return SVX_ORIENTATION_STACKED + 1; // letzter Enum-Wert + 1
}
bool SvxOrientationItem::IsStacked() const
{
return static_cast< SvxCellOrientation >( GetValue() ) == SVX_ORIENTATION_STACKED;
}
sal_Int32 SvxOrientationItem::GetRotation( sal_Int32 nStdAngle ) const
{
sal_Int32 nAngle = nStdAngle;
switch( static_cast< SvxCellOrientation >( GetValue() ) )
{
case SVX_ORIENTATION_BOTTOMTOP: nAngle = 9000;break;
case SVX_ORIENTATION_TOPBOTTOM: nAngle = 27000;break;
default: ; //prevent warning
}
return nAngle;
}
void SvxOrientationItem::SetFromRotation( sal_Int32 nRotation, bool bStacked )
{
if( bStacked )
{
SetValue( SVX_ORIENTATION_STACKED );
}
else switch( nRotation )
{
case 9000: SetValue( SVX_ORIENTATION_BOTTOMTOP ); break;
case 27000: SetValue( SVX_ORIENTATION_TOPBOTTOM ); break;
default: SetValue( SVX_ORIENTATION_STANDARD );
}
}
// class SvxMarginItem ---------------------------------------------------
SvxMarginItem::SvxMarginItem( const sal_uInt16 nId ) :
SfxPoolItem( nId ),
nLeftMargin ( 20 ),
nTopMargin ( 20 ),
nRightMargin ( 20 ),
nBottomMargin( 20 )
{
}
SvxMarginItem::SvxMarginItem( sal_Int16 nLeft,
sal_Int16 nTop,
sal_Int16 nRight,
sal_Int16 nBottom,
const sal_uInt16 nId ) :
SfxPoolItem( nId ),
nLeftMargin ( nLeft ),
nTopMargin ( nTop ),
nRightMargin ( nRight ),
nBottomMargin( nBottom )
{
}
SvxMarginItem::SvxMarginItem( const SvxMarginItem& rItem ) :
SfxPoolItem( rItem.Which() )
{
nLeftMargin = rItem.nLeftMargin;
nTopMargin = rItem.nTopMargin;
nRightMargin = rItem.nRightMargin;
nBottomMargin = rItem.nBottomMargin;
}
SfxItemPresentation SvxMarginItem::GetPresentation
(
SfxItemPresentation ePres,
SfxMapUnit eCoreUnit,
SfxMapUnit ePresUnit,
OUString& rText, const IntlWrapper *pIntl
) const
{
OUString cpDelimTmp = OUString(cpDelim);
switch ( ePres )
{
case SFX_ITEM_PRESENTATION_NONE:
rText = OUString();
return SFX_ITEM_PRESENTATION_NONE;
case SFX_ITEM_PRESENTATION_NAMELESS:
{
rText = GetMetricText( (long)nLeftMargin, eCoreUnit, ePresUnit, pIntl ) +
cpDelimTmp +
GetMetricText( (long)nTopMargin, eCoreUnit, ePresUnit, pIntl ) +
cpDelimTmp +
GetMetricText( (long)nRightMargin, eCoreUnit, ePresUnit, pIntl ) +
cpDelimTmp +
GetMetricText( (long)nBottomMargin, eCoreUnit, ePresUnit, pIntl );
return SFX_ITEM_PRESENTATION_NAMELESS;
}
case SFX_ITEM_PRESENTATION_COMPLETE:
{
rText = SVX_RESSTR(RID_SVXITEMS_MARGIN_LEFT) +
GetMetricText( (long)nLeftMargin, eCoreUnit, ePresUnit, pIntl ) +
" " + EE_RESSTR(GetMetricId(ePresUnit)) +
cpDelimTmp +
SVX_RESSTR(RID_SVXITEMS_MARGIN_TOP) +
GetMetricText( (long)nTopMargin, eCoreUnit, ePresUnit, pIntl ) +
" " + EE_RESSTR(GetMetricId(ePresUnit)) +
cpDelimTmp +
SVX_RESSTR(RID_SVXITEMS_MARGIN_RIGHT) +
GetMetricText( (long)nRightMargin, eCoreUnit, ePresUnit, pIntl ) +
" " + EE_RESSTR(GetMetricId(ePresUnit)) +
cpDelimTmp +
SVX_RESSTR(RID_SVXITEMS_MARGIN_BOTTOM) +
GetMetricText( (long)nBottomMargin, eCoreUnit, ePresUnit, pIntl ) +
" " + EE_RESSTR(GetMetricId(ePresUnit));
return SFX_ITEM_PRESENTATION_COMPLETE;
}
default: ; //prevent warning
}
return SFX_ITEM_PRESENTATION_NONE;
}
bool SvxMarginItem::operator==( const SfxPoolItem& rItem ) const
{
DBG_ASSERT( SfxPoolItem::operator==( rItem ), "unequal type" );
return ( ( nLeftMargin == ( (SvxMarginItem&)rItem ).nLeftMargin ) &&
( nTopMargin == ( (SvxMarginItem&)rItem ).nTopMargin ) &&
( nRightMargin == ( (SvxMarginItem&)rItem ).nRightMargin ) &&
( nBottomMargin == ( (SvxMarginItem&)rItem ).nBottomMargin ) );
}
SfxPoolItem* SvxMarginItem::Clone( SfxItemPool* ) const
{
return new SvxMarginItem(*this);
}
SfxPoolItem* SvxMarginItem::Create( SvStream& rStream, sal_uInt16 ) const
{
sal_Int16 nLeft;
sal_Int16 nTop;
sal_Int16 nRight;
sal_Int16 nBottom;
rStream.ReadInt16( nLeft );
rStream.ReadInt16( nTop );
rStream.ReadInt16( nRight );
rStream.ReadInt16( nBottom );
return new SvxMarginItem( nLeft, nTop, nRight, nBottom, Which() );
}
SvStream& SvxMarginItem::Store( SvStream &rStream, sal_uInt16 /*nItemVersion*/) const
{
rStream.WriteInt16( nLeftMargin );
rStream.WriteInt16( nTopMargin );
rStream.WriteInt16( nRightMargin );
rStream.WriteInt16( nBottomMargin );
return rStream;
}
bool SvxMarginItem::QueryValue( uno::Any& rVal, sal_uInt8 nMemberId ) const
{
bool bConvert = 0!=(nMemberId&CONVERT_TWIPS);
nMemberId &= ~CONVERT_TWIPS;
switch ( nMemberId )
{
// jetzt alles signed
case MID_MARGIN_L_MARGIN:
rVal <<= (sal_Int32)( bConvert ? convertTwipToMm100(nLeftMargin) : nLeftMargin );
break;
case MID_MARGIN_R_MARGIN:
rVal <<= (sal_Int32)( bConvert ? convertTwipToMm100(nRightMargin) : nRightMargin );
break;
case MID_MARGIN_UP_MARGIN:
rVal <<= (sal_Int32)( bConvert ? convertTwipToMm100(nTopMargin) : nTopMargin );
break;
case MID_MARGIN_LO_MARGIN:
rVal <<= (sal_Int32)( bConvert ? convertTwipToMm100(nBottomMargin) : nBottomMargin );
break;
default:
OSL_FAIL("unknown MemberId");
return false;
}
return true;
}
bool SvxMarginItem::PutValue( const uno::Any& rVal, sal_uInt8 nMemberId )
{
bool bConvert = ( ( nMemberId & CONVERT_TWIPS ) != 0 );
long nMaxVal = bConvert ? convertTwipToMm100(SHRT_MAX) : SHRT_MAX; // Members sind sal_Int16
sal_Int32 nVal = 0;
if(!(rVal >>= nVal) || (nVal > nMaxVal))
return false;
switch ( nMemberId & ~CONVERT_TWIPS )
{
case MID_MARGIN_L_MARGIN:
nLeftMargin = (sal_Int16)( bConvert ? convertMm100ToTwip(nVal) : nVal );
break;
case MID_MARGIN_R_MARGIN:
nRightMargin = (sal_Int16)( bConvert ? convertMm100ToTwip(nVal) : nVal );
break;
case MID_MARGIN_UP_MARGIN:
nTopMargin = (sal_Int16)( bConvert ? convertMm100ToTwip(nVal) : nVal );
break;
case MID_MARGIN_LO_MARGIN:
nBottomMargin = (sal_Int16)( bConvert ? convertMm100ToTwip(nVal) : nVal );
break;
default:
OSL_FAIL("unknown MemberId");
return false;
}
return true;
}
void SvxMarginItem::SetLeftMargin( sal_Int16 nLeft )
{
nLeftMargin = nLeft;
}
void SvxMarginItem::SetTopMargin( sal_Int16 nTop )
{
nTopMargin = nTop;
}
void SvxMarginItem::SetRightMargin( sal_Int16 nRight )
{
nRightMargin = nRight;
}
void SvxMarginItem::SetBottomMargin( sal_Int16 nBottom )
{
nBottomMargin = nBottom;
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */