/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include namespace sdr { namespace overlay { void OverlayManagerBuffered::ImpPrepareBufferDevice() { // compare size of mpBufferDevice with size of visible area if(mpBufferDevice->GetOutputSizePixel() != getOutputDevice().GetOutputSizePixel()) { // set new buffer size, copy as much content as possible (use bool parameter for vcl). // Newly uncovered regions will be repainted. mpBufferDevice->SetOutputSizePixel(getOutputDevice().GetOutputSizePixel(), false); } // compare the MapModes for zoom/scroll changes if(mpBufferDevice->GetMapMode() != getOutputDevice().GetMapMode()) { const bool bZoomed( mpBufferDevice->GetMapMode().GetScaleX() != getOutputDevice().GetMapMode().GetScaleX() || mpBufferDevice->GetMapMode().GetScaleY() != getOutputDevice().GetMapMode().GetScaleY()); if(!bZoomed) { const Point& rOriginOld = mpBufferDevice->GetMapMode().GetOrigin(); const Point& rOriginNew = getOutputDevice().GetMapMode().GetOrigin(); const bool bScrolled(rOriginOld != rOriginNew); if(bScrolled) { // get pixel bounds const Point aOriginOldPixel(mpBufferDevice->LogicToPixel(rOriginOld)); const Point aOriginNewPixel(mpBufferDevice->LogicToPixel(rOriginNew)); const Size aOutputSizePixel(mpBufferDevice->GetOutputSizePixel()); // remember and switch off MapMode const bool bMapModeWasEnabled(mpBufferDevice->IsMapModeEnabled()); mpBufferDevice->EnableMapMode(false); // scroll internally buffered stuff const Point aDestinationOffsetPixel(aOriginNewPixel - aOriginOldPixel); mpBufferDevice->DrawOutDev( aDestinationOffsetPixel, aOutputSizePixel, // destination Point(), aOutputSizePixel); // source // restore MapMode mpBufferDevice->EnableMapMode(bMapModeWasEnabled); // scroll remembered region, too. if(!maBufferRememberedRangePixel.isEmpty()) { const basegfx::B2IPoint aIPointDestinationOffsetPixel(aDestinationOffsetPixel.X(), aDestinationOffsetPixel.Y()); const basegfx::B2IPoint aNewMinimum(maBufferRememberedRangePixel.getMinimum() + aIPointDestinationOffsetPixel); const basegfx::B2IPoint aNewMaximum(maBufferRememberedRangePixel.getMaximum() + aIPointDestinationOffsetPixel); maBufferRememberedRangePixel = basegfx::B2IRange(aNewMinimum, aNewMaximum); } } } // copy new MapMode mpBufferDevice->SetMapMode(getOutputDevice().GetMapMode()); } // #i29186# mpBufferDevice->SetDrawMode(getOutputDevice().GetDrawMode()); mpBufferDevice->SetSettings(getOutputDevice().GetSettings()); mpBufferDevice->SetAntialiasing(getOutputDevice().GetAntialiasing()); } void OverlayManagerBuffered::ImpRestoreBackground() const { const tools::Rectangle aRegionRectanglePixel( maBufferRememberedRangePixel.getMinX(), maBufferRememberedRangePixel.getMinY(), maBufferRememberedRangePixel.getMaxX(), maBufferRememberedRangePixel.getMaxY()); const vcl::Region aRegionPixel(aRegionRectanglePixel); ImpRestoreBackground(aRegionPixel); } void OverlayManagerBuffered::ImpRestoreBackground(const vcl::Region& rRegionPixel) const { // MapModes off const bool bMapModeWasEnabledDest(getOutputDevice().IsMapModeEnabled()); const bool bMapModeWasEnabledSource(mpBufferDevice->IsMapModeEnabled()); getOutputDevice().EnableMapMode(false); const_cast(this)->mpBufferDevice->EnableMapMode(false); // local region RectangleVector aRectangles; rRegionPixel.GetRegionRectangles(aRectangles); for(const auto& rRect : aRectangles) { #ifdef DBG_UTIL // #i72754# possible graphical region test only with non-pro static bool bDoPaintForVisualControl(false); if(bDoPaintForVisualControl) { getOutputDevice().SetLineColor(COL_LIGHTGREEN); getOutputDevice().SetFillColor(); getOutputDevice().DrawRect(rRect); } #endif // restore the area const Point aTopLeft(rRect.TopLeft()); const Size aSize(rRect.GetSize()); getOutputDevice().DrawOutDev( aTopLeft, aSize, // destination aTopLeft, aSize, // source *mpBufferDevice); } // restore MapModes getOutputDevice().EnableMapMode(bMapModeWasEnabledDest); const_cast(this)->mpBufferDevice->EnableMapMode(bMapModeWasEnabledSource); } void OverlayManagerBuffered::ImpSaveBackground(const vcl::Region& rRegion, OutputDevice* pPreRenderDevice) { // prepare source OutputDevice& rSource = pPreRenderDevice ? *pPreRenderDevice : getOutputDevice(); // Ensure buffer is valid ImpPrepareBufferDevice(); // build region which needs to be copied vcl::Region aRegion(rSource.LogicToPixel(rRegion)); // limit to PaintRegion if it's a window. This will be evtl. the expanded one, // but always the exact redraw area if(OUTDEV_WINDOW == rSource.GetOutDevType()) { vcl::Window& rWindow = static_cast(rSource); vcl::Region aPaintRegionPixel = rWindow.LogicToPixel(rWindow.GetPaintRegion()); aRegion.Intersect(aPaintRegionPixel); // #i72754# Make sure content is completely rendered, the window // will be used as source of a DrawOutDev soon rWindow.Flush(); } // also limit to buffer size const tools::Rectangle aBufferDeviceRectanglePixel(Point(), mpBufferDevice->GetOutputSizePixel()); aRegion.Intersect(aBufferDeviceRectanglePixel); // MapModes off const bool bMapModeWasEnabledDest(rSource.IsMapModeEnabled()); const bool bMapModeWasEnabledSource(mpBufferDevice->IsMapModeEnabled()); rSource.EnableMapMode(false); mpBufferDevice->EnableMapMode(false); // prepare to iterate over the rectangles from the region in pixels RectangleVector aRectangles; aRegion.GetRegionRectangles(aRectangles); for(const auto& rRect : aRectangles) { // for each rectangle, save the area const Point aTopLeft(rRect.TopLeft()); const Size aSize(rRect.GetSize()); mpBufferDevice->DrawOutDev( aTopLeft, aSize, // destination aTopLeft, aSize, // source rSource); } // restore MapModes rSource.EnableMapMode(bMapModeWasEnabledDest); mpBufferDevice->EnableMapMode(bMapModeWasEnabledSource); } IMPL_LINK_NOARG(OverlayManagerBuffered, ImpBufferTimerHandler, Timer*, void) { //Resolves: fdo#46728 ensure this exists until end of scope rtl::Reference xRef(this); // stop timer maBufferIdle.Stop(); if(!maBufferRememberedRangePixel.isEmpty()) { // logic size for impDrawMember call basegfx::B2DRange aBufferRememberedRangeLogic( maBufferRememberedRangePixel.getMinX(), maBufferRememberedRangePixel.getMinY(), maBufferRememberedRangePixel.getMaxX(), maBufferRememberedRangePixel.getMaxY()); aBufferRememberedRangeLogic.transform(getOutputDevice().GetInverseViewTransformation()); // prepare cursor handling const bool bTargetIsWindow(OUTDEV_WINDOW == mrOutputDevice.GetOutDevType()); bool bCursorWasEnabled(false); // #i80730# switch off VCL cursor during overlay refresh if(bTargetIsWindow) { vcl::Window& rWindow = static_cast< vcl::Window& >(mrOutputDevice); vcl::Cursor* pCursor = rWindow.GetCursor(); if(pCursor && pCursor->IsVisible()) { pCursor->Hide(); bCursorWasEnabled = true; } } // refresh with prerendering { // #i73602# ensure valid and sized mpOutputBufferDevice const Size aDestinationSizePixel(mpBufferDevice->GetOutputSizePixel()); const Size aOutputBufferSizePixel(mpOutputBufferDevice->GetOutputSizePixel()); if(aDestinationSizePixel != aOutputBufferSizePixel) { mpOutputBufferDevice->SetOutputSizePixel(aDestinationSizePixel); } mpOutputBufferDevice->SetMapMode(getOutputDevice().GetMapMode()); mpOutputBufferDevice->EnableMapMode(false); mpOutputBufferDevice->SetDrawMode(mpBufferDevice->GetDrawMode()); mpOutputBufferDevice->SetSettings(mpBufferDevice->GetSettings()); mpOutputBufferDevice->SetAntialiasing(mpBufferDevice->GetAntialiasing()); // calculate sizes tools::Rectangle aRegionRectanglePixel( maBufferRememberedRangePixel.getMinX(), maBufferRememberedRangePixel.getMinY(), maBufferRememberedRangePixel.getMaxX(), maBufferRememberedRangePixel.getMaxY()); // truncate aRegionRectanglePixel to destination pixel size, more does // not need to be prepared since destination is a buffer for a window. So, // maximum size indirectly shall be limited to getOutputDevice().GetOutputSizePixel() if(aRegionRectanglePixel.Left() < 0) { aRegionRectanglePixel.SetLeft( 0 ); } if(aRegionRectanglePixel.Top() < 0) { aRegionRectanglePixel.SetTop( 0 ); } if(aRegionRectanglePixel.Right() > aDestinationSizePixel.getWidth()) { aRegionRectanglePixel.SetRight( aDestinationSizePixel.getWidth() ); } if(aRegionRectanglePixel.Bottom() > aDestinationSizePixel.getHeight()) { aRegionRectanglePixel.SetBottom( aDestinationSizePixel.getHeight() ); } // get sizes const Point aTopLeft(aRegionRectanglePixel.TopLeft()); const Size aSize(aRegionRectanglePixel.GetSize()); { const bool bMapModeWasEnabledDest(mpBufferDevice->IsMapModeEnabled()); mpBufferDevice->EnableMapMode(false); mpOutputBufferDevice->DrawOutDev( aTopLeft, aSize, // destination aTopLeft, aSize, // source *mpBufferDevice); // restore MapModes mpBufferDevice->EnableMapMode(bMapModeWasEnabledDest); } // paint overlay content for remembered region, use // method from base class directly mpOutputBufferDevice->EnableMapMode(); OverlayManager::ImpDrawMembers(aBufferRememberedRangeLogic, *mpOutputBufferDevice); mpOutputBufferDevice->EnableMapMode(false); // copy to output { const bool bMapModeWasEnabledDest(getOutputDevice().IsMapModeEnabled()); getOutputDevice().EnableMapMode(false); getOutputDevice().DrawOutDev( aTopLeft, aSize, // destination aTopLeft, aSize, // source *mpOutputBufferDevice); // debug /*getOutputDevice().SetLineCOL_RED); getOutputDevice().SetFillColor(); getOutputDevice().DrawRect(Rectangle(aTopLeft, aSize));*/ // restore MapModes getOutputDevice().EnableMapMode(bMapModeWasEnabledDest); } } // VCL hack for transparent child windows // Problem is e.g. a radiobutton form control in life mode. The used window // is a transparence vcl childwindow. This flag only allows the parent window to // paint into the child windows area, but there is no mechanism which takes // care for a repaint of the child window. A transparent child window is NOT // a window which always keeps it's content consistent over the parent, but it's // more like just a paint flag for the parent. // To get the update, the windows in question are updated manually here. if(bTargetIsWindow) { vcl::Window& rWindow = static_cast< vcl::Window& >(mrOutputDevice); const tools::Rectangle aRegionRectanglePixel( maBufferRememberedRangePixel.getMinX(), maBufferRememberedRangePixel.getMinY(), maBufferRememberedRangePixel.getMaxX(), maBufferRememberedRangePixel.getMaxY()); PaintTransparentChildren(rWindow, aRegionRectanglePixel); } // #i80730# restore visibility of VCL cursor if(bCursorWasEnabled) { vcl::Window& rWindow = static_cast< vcl::Window& >(mrOutputDevice); vcl::Cursor* pCursor = rWindow.GetCursor(); if(pCursor) { // check if cursor still exists. It may have been deleted from someone pCursor->Show(); } } // forget remembered Region maBufferRememberedRangePixel.reset(); } } OverlayManagerBuffered::OverlayManagerBuffered( OutputDevice& rOutputDevice) : OverlayManager(rOutputDevice), mpBufferDevice(VclPtr::Create()), mpOutputBufferDevice(VclPtr::Create()), maBufferIdle("sdr overlay OverlayManagerBuffered Idle") { // Init timer maBufferIdle.SetPriority( TaskPriority::POST_PAINT ); maBufferIdle.SetInvokeHandler(LINK(this, OverlayManagerBuffered, ImpBufferTimerHandler)); maBufferIdle.SetDebugName( "sdr::overlay::OverlayManagerBuffered maBufferIdle" ); } rtl::Reference OverlayManagerBuffered::create( OutputDevice& rOutputDevice) { return rtl::Reference(new OverlayManagerBuffered(rOutputDevice)); } OverlayManagerBuffered::~OverlayManagerBuffered() { // Clear timer maBufferIdle.Stop(); if(!maBufferRememberedRangePixel.isEmpty()) { // Restore all rectangles for remembered region from buffer ImpRestoreBackground(); } } void OverlayManagerBuffered::completeRedraw(const vcl::Region& rRegion, OutputDevice* pPreRenderDevice) const { if(!rRegion.IsEmpty()) { // save new background const_cast(this)->ImpSaveBackground(rRegion, pPreRenderDevice); } // call parent OverlayManager::completeRedraw(rRegion, pPreRenderDevice); } void OverlayManagerBuffered::flush() { // call timer handler direct ImpBufferTimerHandler(nullptr); } void OverlayManagerBuffered::invalidateRange(const basegfx::B2DRange& rRange) { if(!rRange.isEmpty()) { // buffered output, do not invalidate but use the timer // to trigger a timer event for refresh maBufferIdle.Start(); // add the discrete range to the remembered region // #i75163# use double precision and floor/ceil rounding to get overlapped pixel region, even // when the given logic region has a width/height of 0.0. This does NOT work with LogicToPixel // since it just transforms the top left and bottom right points equally without taking // discrete pixel coverage into account. An empty B2DRange and thus empty logic Rectangle translated // to an also empty discrete pixel rectangle - what is wrong. basegfx::B2DRange aDiscreteRange(rRange); aDiscreteRange.transform(getOutputDevice().GetViewTransformation()); if(maDrawinglayerOpt.IsAntiAliasing()) { // assume AA needs one pixel more and invalidate one pixel more const double fDiscreteOne(getDiscreteOne()); const basegfx::B2IPoint aTopLeft( static_cast(floor(aDiscreteRange.getMinX() - fDiscreteOne)), static_cast(floor(aDiscreteRange.getMinY() - fDiscreteOne))); const basegfx::B2IPoint aBottomRight( static_cast(ceil(aDiscreteRange.getMaxX() + fDiscreteOne)), static_cast(ceil(aDiscreteRange.getMaxY() + fDiscreteOne))); maBufferRememberedRangePixel.expand(aTopLeft); maBufferRememberedRangePixel.expand(aBottomRight); } else { const basegfx::B2IPoint aTopLeft(static_cast(floor(aDiscreteRange.getMinX())), static_cast(floor(aDiscreteRange.getMinY()))); const basegfx::B2IPoint aBottomRight(static_cast(ceil(aDiscreteRange.getMaxX())), static_cast(ceil(aDiscreteRange.getMaxY()))); maBufferRememberedRangePixel.expand(aTopLeft); maBufferRememberedRangePixel.expand(aBottomRight); } } } } // end of namespace overlay } // end of namespace sdr /* vim:set shiftwidth=4 softtabstop=4 expandtab: */