/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <svx/svdedtv.hxx>
#include <editeng/outliner.hxx>
#include <svx/svdundo.hxx>
#include <svx/svdogrp.hxx>
#include <svx/svdoutl.hxx>
#include <svx/svdovirt.hxx>
#include <svx/svdopath.hxx>
#include <svx/svdpage.hxx>
#include <svx/svdpagv.hxx>
#include <svx/svditer.hxx>
#include <svx/svdograf.hxx>
#include <svx/svdoole2.hxx>
#include <svx/dialmgr.hxx>
#include <svx/sdooitm.hxx>
#include <svx/sdshitm.hxx>
#include <svx/xfillit0.hxx>
#include <svx/xlineit0.hxx>
#include <svx/xtextit0.hxx>
#include "svdfmtf.hxx"
#include "svdpdf.hxx"
#include <svx/svdetc.hxx>
#include <sfx2/basedlgs.hxx>
#include <editeng/outlobj.hxx>
#include <editeng/eeitem.hxx>
#include <basegfx/polygon/b2dpolypolygon.hxx>
#include <basegfx/polygon/b2dpolypolygontools.hxx>
#include <svx/svxdlg.hxx>
#include <svx/strings.hrc>
#include <svx/svdoashp.hxx>
#include <basegfx/polygon/b2dpolypolygoncutter.hxx>
#include <i18nutil/unicode.hxx>
#include <sal/log.hxx>
#include <tools/debug.hxx>
#include <memory>
#include <vector>
using ::std::vector;
using namespace com::sun::star;
SdrObject* SdrEditView::GetMaxToTopObj(SdrObject* /*pObj*/) const
{
return nullptr;
}
SdrObject* SdrEditView::GetMaxToBtmObj(SdrObject* /*pObj*/) const
{
return nullptr;
}
void SdrEditView::ObjOrderChanged(SdrObject* /*pObj*/, size_t /*nOldPos*/, size_t /*nNewPos*/)
{
}
void SdrEditView::MovMarkedToTop()
{
const size_t nCount=GetMarkedObjectCount();
if (nCount!=0)
{
const bool bUndo = IsUndoEnabled();
if( bUndo )
BegUndo(SvxResId(STR_EditMovToTop),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::MoveToTop);
SortMarkedObjects();
for (size_t nm=0; nm<nCount; ++nm)
{ // All Ordnums have to be correct!
GetMarkedObjectByIndex(nm)->GetOrdNum();
}
bool bChg=false;
SdrObjList* pOL0=nullptr;
size_t nNewPos=0;
for (size_t nm=nCount; nm>0;)
{
--nm;
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pObj=pM->GetMarkedSdrObj();
SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
if (pOL!=pOL0)
{
nNewPos = pOL->GetObjCount()-1;
pOL0=pOL;
}
const size_t nNowPos = pObj->GetOrdNumDirect();
const tools::Rectangle& rBR=pObj->GetCurrentBoundRect();
size_t nCmpPos = nNowPos+1;
SdrObject* pMaxObj=GetMaxToTopObj(pObj);
if (pMaxObj!=nullptr)
{
size_t nMaxPos=pMaxObj->GetOrdNum();
if (nMaxPos!=0)
nMaxPos--;
if (nNewPos>nMaxPos)
nNewPos=nMaxPos; // neither go faster...
if (nNewPos<nNowPos)
nNewPos=nNowPos; // nor go in the other direction
}
bool bEnd=false;
while (nCmpPos<nNewPos && !bEnd)
{
SdrObject* pCmpObj=pOL->GetObj(nCmpPos);
if (pCmpObj==nullptr)
{
OSL_FAIL("MovMarkedToTop(): Reference object not found.");
bEnd=true;
}
else if (pCmpObj==pMaxObj)
{
nNewPos=nCmpPos;
nNewPos--;
bEnd=true;
}
else if (rBR.IsOver(pCmpObj->GetCurrentBoundRect()))
{
nNewPos=nCmpPos;
bEnd=true;
}
else
{
nCmpPos++;
}
}
if (nNowPos!=nNewPos)
{
bChg=true;
pOL->SetObjectOrdNum(nNowPos,nNewPos);
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj,nNowPos,nNewPos));
ObjOrderChanged(pObj,nNowPos,nNewPos);
}
nNewPos--;
}
if( bUndo )
EndUndo();
if (bChg)
MarkListHasChanged();
}
}
void SdrEditView::MovMarkedToBtm()
{
const size_t nCount=GetMarkedObjectCount();
if (nCount!=0)
{
const bool bUndo = IsUndoEnabled();
if( bUndo )
BegUndo(SvxResId(STR_EditMovToBtm),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::MoveToBottom);
SortMarkedObjects();
for (size_t nm=0; nm<nCount; ++nm)
{ // All Ordnums have to be correct!
GetMarkedObjectByIndex(nm)->GetOrdNum();
}
bool bChg=false;
SdrObjList* pOL0=nullptr;
size_t nNewPos=0;
for (size_t nm=0; nm<nCount; ++nm)
{
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pObj=pM->GetMarkedSdrObj();
SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
if (pOL!=pOL0)
{
nNewPos=0;
pOL0=pOL;
}
const size_t nNowPos = pObj->GetOrdNumDirect();
const tools::Rectangle& rBR=pObj->GetCurrentBoundRect();
size_t nCmpPos = nNowPos;
if (nCmpPos>0)
--nCmpPos;
SdrObject* pMaxObj=GetMaxToBtmObj(pObj);
if (pMaxObj!=nullptr)
{
const size_t nMinPos=pMaxObj->GetOrdNum()+1;
if (nNewPos<nMinPos)
nNewPos=nMinPos; // neither go faster...
if (nNewPos>nNowPos)
nNewPos=nNowPos; // nor go in the other direction
}
bool bEnd=false;
// nNewPos in this case is the "maximum" position
// the object may reach without going faster than the object before
// it (multiple selection).
while (nCmpPos>nNewPos && !bEnd)
{
SdrObject* pCmpObj=pOL->GetObj(nCmpPos);
if (pCmpObj==nullptr)
{
OSL_FAIL("MovMarkedToBtm(): Reference object not found.");
bEnd=true;
}
else if (pCmpObj==pMaxObj)
{
nNewPos=nCmpPos;
nNewPos++;
bEnd=true;
}
else if (rBR.IsOver(pCmpObj->GetCurrentBoundRect()))
{
nNewPos=nCmpPos;
bEnd=true;
}
else
{
nCmpPos--;
}
}
if (nNowPos!=nNewPos)
{
bChg=true;
pOL->SetObjectOrdNum(nNowPos,nNewPos);
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj,nNowPos,nNewPos));
ObjOrderChanged(pObj,nNowPos,nNewPos);
}
nNewPos++;
}
if(bUndo)
EndUndo();
if(bChg)
MarkListHasChanged();
}
}
void SdrEditView::PutMarkedToTop()
{
PutMarkedInFrontOfObj(nullptr);
}
void SdrEditView::PutMarkedInFrontOfObj(const SdrObject* pRefObj)
{
const size_t nCount=GetMarkedObjectCount();
if (nCount==0)
return;
const bool bUndo = IsUndoEnabled();
if( bUndo )
BegUndo(SvxResId(STR_EditPutToTop),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::PutToTop);
SortMarkedObjects();
if (pRefObj!=nullptr)
{
// Make "in front of the object" work, even if the
// selected objects are already in front of the other object
const size_t nRefMark=TryToFindMarkedObject(pRefObj);
SdrMark aRefMark;
if (nRefMark!=SAL_MAX_SIZE)
{
aRefMark=*GetSdrMarkByIndex(nRefMark);
GetMarkedObjectListWriteAccess().DeleteMark(nRefMark);
}
PutMarkedToBtm();
if (nRefMark!=SAL_MAX_SIZE)
{
GetMarkedObjectListWriteAccess().InsertEntry(aRefMark);
SortMarkedObjects();
}
}
for (size_t nm=0; nm<nCount; ++nm)
{ // All Ordnums have to be correct!
GetMarkedObjectByIndex(nm)->GetOrdNum();
}
bool bChg=false;
SdrObjList* pOL0=nullptr;
size_t nNewPos=0;
for (size_t nm=nCount; nm>0;)
{
--nm;
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pObj=pM->GetMarkedSdrObj();
if (pObj!=pRefObj)
{
SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
if (pOL!=pOL0)
{
nNewPos=pOL->GetObjCount()-1;
pOL0=pOL;
}
const size_t nNowPos=pObj->GetOrdNumDirect();
SdrObject* pMaxObj=GetMaxToTopObj(pObj);
if (pMaxObj!=nullptr)
{
size_t nMaxOrd=pMaxObj->GetOrdNum(); // sadly doesn't work any other way
if (nMaxOrd>0)
nMaxOrd--;
if (nNewPos>nMaxOrd)
nNewPos=nMaxOrd; // neither go faster...
if (nNewPos<nNowPos)
nNewPos=nNowPos; // nor go into the other direction
}
if (pRefObj!=nullptr)
{
if (pRefObj->getParentSdrObjListFromSdrObject()==pObj->getParentSdrObjListFromSdrObject())
{
const size_t nMaxOrd=pRefObj->GetOrdNum(); // sadly doesn't work any other way
if (nNewPos>nMaxOrd)
nNewPos=nMaxOrd; // neither go faster...
if (nNewPos<nNowPos)
nNewPos=nNowPos; // nor go into the other direction
}
else
{
nNewPos=nNowPos; // different PageView, so don't change
}
}
if (nNowPos!=nNewPos)
{
bChg=true;
pOL->SetObjectOrdNum(nNowPos,nNewPos);
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj,nNowPos,nNewPos));
ObjOrderChanged(pObj,nNowPos,nNewPos);
}
nNewPos--;
} // if (pObj!=pRefObj)
} // for loop over all selected objects
if( bUndo )
EndUndo();
if(bChg)
MarkListHasChanged();
}
void SdrEditView::PutMarkedToBtm()
{
PutMarkedBehindObj(nullptr);
}
void SdrEditView::PutMarkedBehindObj(const SdrObject* pRefObj)
{
const size_t nCount=GetMarkedObjectCount();
if (nCount==0)
return;
const bool bUndo = IsUndoEnabled();
if( bUndo )
BegUndo(SvxResId(STR_EditPutToBtm),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::PutToBottom);
SortMarkedObjects();
if (pRefObj!=nullptr)
{
// Make "behind the object" work, even if the
// selected objects are already behind the other object
const size_t nRefMark=TryToFindMarkedObject(pRefObj);
SdrMark aRefMark;
if (nRefMark!=SAL_MAX_SIZE)
{
aRefMark=*GetSdrMarkByIndex(nRefMark);
GetMarkedObjectListWriteAccess().DeleteMark(nRefMark);
}
PutMarkedToTop();
if (nRefMark!=SAL_MAX_SIZE)
{
GetMarkedObjectListWriteAccess().InsertEntry(aRefMark);
SortMarkedObjects();
}
}
for (size_t nm=0; nm<nCount; ++nm) { // All Ordnums have to be correct!
GetMarkedObjectByIndex(nm)->GetOrdNum();
}
bool bChg=false;
SdrObjList* pOL0=nullptr;
size_t nNewPos=0;
for (size_t nm=0; nm<nCount; ++nm) {
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pObj=pM->GetMarkedSdrObj();
if (pObj!=pRefObj) {
SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
if (pOL!=pOL0) {
nNewPos=0;
pOL0=pOL;
}
const size_t nNowPos=pObj->GetOrdNumDirect();
SdrObject* pMinObj=GetMaxToBtmObj(pObj);
if (pMinObj!=nullptr) {
const size_t nMinOrd=pMinObj->GetOrdNum()+1; // sadly doesn't work any differently
if (nNewPos<nMinOrd) nNewPos=nMinOrd; // neither go faster...
if (nNewPos>nNowPos) nNewPos=nNowPos; // nor go into the other direction
}
if (pRefObj!=nullptr) {
if (pRefObj->getParentSdrObjListFromSdrObject()==pObj->getParentSdrObjListFromSdrObject()) {
const size_t nMinOrd=pRefObj->GetOrdNum(); // sadly doesn't work any differently
if (nNewPos<nMinOrd) nNewPos=nMinOrd; // neither go faster...
if (nNewPos>nNowPos) nNewPos=nNowPos; // nor go into the other direction
} else {
nNewPos=nNowPos; // different PageView, so don't change
}
}
if (nNowPos!=nNewPos) {
bChg=true;
pOL->SetObjectOrdNum(nNowPos,nNewPos);
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj,nNowPos,nNewPos));
ObjOrderChanged(pObj,nNowPos,nNewPos);
}
nNewPos++;
} // if (pObj!=pRefObj)
} // for loop over all selected objects
if(bUndo)
EndUndo();
if(bChg)
MarkListHasChanged();
}
void SdrEditView::ReverseOrderOfMarked()
{
SortMarkedObjects();
const size_t nMarkCount=GetMarkedObjectCount();
if (nMarkCount>0)
{
bool bChg=false;
bool bUndo = IsUndoEnabled();
if( bUndo )
BegUndo(SvxResId(STR_EditRevOrder),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::ReverseOrder);
size_t a=0;
do {
// take into account selection across multiple PageViews
size_t b=a+1;
while (b<nMarkCount && GetSdrPageViewOfMarkedByIndex(b) == GetSdrPageViewOfMarkedByIndex(a)) ++b;
--b;
SdrObjList* pOL=GetSdrPageViewOfMarkedByIndex(a)->GetObjList();
size_t c=b;
if (a<c) { // make sure OrdNums aren't dirty
GetMarkedObjectByIndex(a)->GetOrdNum();
}
while (a<c) {
SdrObject* pObj1=GetMarkedObjectByIndex(a);
SdrObject* pObj2=GetMarkedObjectByIndex(c);
const size_t nOrd1=pObj1->GetOrdNumDirect();
const size_t nOrd2=pObj2->GetOrdNumDirect();
if( bUndo )
{
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj1,nOrd1,nOrd2));
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj2,nOrd2-1,nOrd1));
}
pOL->SetObjectOrdNum(nOrd1,nOrd2);
// Obj 2 has moved forward by one position, so now nOrd2-1
pOL->SetObjectOrdNum(nOrd2-1,nOrd1);
// use Replace instead of SetOrdNum for performance reasons (recalculation of Ordnums)
++a;
--c;
bChg=true;
}
a=b+1;
} while (a<nMarkCount);
if(bUndo)
EndUndo();
if(bChg)
MarkListHasChanged();
}
}
void SdrEditView::ImpCheckToTopBtmPossible()
{
const size_t nCount=GetMarkedObjectCount();
if (nCount==0)
return;
if (nCount==1)
{ // special-casing for single selection
SdrObject* pObj=GetMarkedObjectByIndex(0);
SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
SAL_WARN_IF(!pOL, "svx", "Object somehow has no ObjList");
size_t nMax = pOL ? pOL->GetObjCount() : 0;
size_t nMin = 0;
const size_t nObjNum=pObj->GetOrdNum();
SdrObject* pRestrict=GetMaxToTopObj(pObj);
if (pRestrict!=nullptr) {
const size_t nRestrict=pRestrict->GetOrdNum();
if (nRestrict<nMax) nMax=nRestrict;
}
pRestrict=GetMaxToBtmObj(pObj);
if (pRestrict!=nullptr) {
const size_t nRestrict=pRestrict->GetOrdNum();
if (nRestrict>nMin) nMin=nRestrict;
}
m_bToTopPossible=nObjNum<nMax-1;
m_bToBtmPossible=nObjNum>nMin;
} else { // multiple selection
SdrObjList* pOL0=nullptr;
size_t nPos0 = 0;
for (size_t nm = 0; !m_bToBtmPossible && nm<nCount; ++nm) { // check 'send to background'
SdrObject* pObj=GetMarkedObjectByIndex(nm);
SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
if (pOL!=pOL0) {
nPos0 = 0;
pOL0=pOL;
}
const size_t nPos = pObj->GetOrdNum();
m_bToBtmPossible = nPos && (nPos-1 > nPos0);
nPos0 = nPos;
}
pOL0=nullptr;
nPos0 = SAL_MAX_SIZE;
for (size_t nm=nCount; !m_bToTopPossible && nm>0; ) { // check 'bring to front'
--nm;
SdrObject* pObj=GetMarkedObjectByIndex(nm);
SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
if (pOL!=pOL0) {
nPos0=pOL->GetObjCount();
pOL0=pOL;
}
const size_t nPos = pObj->GetOrdNum();
m_bToTopPossible = nPos+1 < nPos0;
nPos0=nPos;
}
}
}
// Combine
void SdrEditView::ImpCopyAttributes(const SdrObject* pSource, SdrObject* pDest) const
{
if (pSource!=nullptr) {
SdrObjList* pOL=pSource->GetSubList();
if (pOL!=nullptr && !pSource->Is3DObj()) { // get first non-group object from group
SdrObjListIter aIter(pOL,SdrIterMode::DeepNoGroups);
pSource=aIter.Next();
}
}
if(pSource && pDest)
{
SfxItemSet aSet(mpModel->GetItemPool(),
svl::Items<SDRATTR_START, SDRATTR_NOTPERSIST_FIRST-1,
SDRATTR_NOTPERSIST_LAST+1, SDRATTR_END,
EE_ITEMS_START, EE_ITEMS_END>{});
aSet.Put(pSource->GetMergedItemSet());
pDest->ClearMergedItem();
pDest->SetMergedItemSet(aSet);
pDest->NbcSetLayer(pSource->GetLayer());
pDest->NbcSetStyleSheet(pSource->GetStyleSheet(), true);
}
}
bool SdrEditView::ImpCanConvertForCombine1(const SdrObject* pObj)
{
// new condition IsLine() to be able to combine simple Lines
bool bIsLine(false);
const SdrPathObj* pPath = dynamic_cast< const SdrPathObj*>( pObj );
if(pPath)
{
bIsLine = pPath->IsLine();
}
SdrObjTransformInfoRec aInfo;
pObj->TakeObjInfo(aInfo);
return (aInfo.bCanConvToPath || aInfo.bCanConvToPoly || bIsLine);
}
bool SdrEditView::ImpCanConvertForCombine(const SdrObject* pObj)
{
SdrObjList* pOL = pObj->GetSubList();
if(pOL && !pObj->Is3DObj())
{
SdrObjListIter aIter(pOL, SdrIterMode::DeepNoGroups);
while(aIter.IsMore())
{
SdrObject* pObj1 = aIter.Next();
// all members of a group have to be convertible
if(!ImpCanConvertForCombine1(pObj1))
{
return false;
}
}
}
else
{
if(!ImpCanConvertForCombine1(pObj))
{
return false;
}
}
return true;
}
basegfx::B2DPolyPolygon SdrEditView::ImpGetPolyPolygon1(const SdrObject* pObj)
{
basegfx::B2DPolyPolygon aRetval;
const SdrPathObj* pPath = dynamic_cast<const SdrPathObj*>( pObj );
if(pPath && !pObj->GetOutlinerParaObject())
{
aRetval = pPath->GetPathPoly();
}
else
{
SdrObjectUniquePtr pConvObj = pObj->ConvertToPolyObj(true/*bCombine*/, false);
if(pConvObj)
{
SdrObjList* pOL = pConvObj->GetSubList();
if(pOL)
{
SdrObjListIter aIter(pOL, SdrIterMode::DeepNoGroups);
while(aIter.IsMore())
{
SdrObject* pObj1 = aIter.Next();
pPath = dynamic_cast<SdrPathObj*>( pObj1 );
if(pPath)
{
aRetval.append(pPath->GetPathPoly());
}
}
}
else
{
pPath = dynamic_cast<SdrPathObj*>( pConvObj.get() );
if(pPath)
{
aRetval = pPath->GetPathPoly();
}
}
}
}
return aRetval;
}
basegfx::B2DPolyPolygon SdrEditView::ImpGetPolyPolygon(const SdrObject* pObj)
{
SdrObjList* pOL = pObj->GetSubList();
if(pOL && !pObj->Is3DObj())
{
basegfx::B2DPolyPolygon aRetval;
SdrObjListIter aIter(pOL, SdrIterMode::DeepNoGroups);
while(aIter.IsMore())
{
SdrObject* pObj1 = aIter.Next();
aRetval.append(ImpGetPolyPolygon1(pObj1));
}
return aRetval;
}
else
{
return ImpGetPolyPolygon1(pObj);
}
}
basegfx::B2DPolygon SdrEditView::ImpCombineToSinglePolygon(const basegfx::B2DPolyPolygon& rPolyPolygon)
{
const sal_uInt32 nPolyCount(rPolyPolygon.count());
if(0 == nPolyCount)
{
return basegfx::B2DPolygon();
}
else if(1 == nPolyCount)
{
return rPolyPolygon.getB2DPolygon(0);
}
else
{
basegfx::B2DPolygon aRetval(rPolyPolygon.getB2DPolygon(0));
for(sal_uInt32 a(1); a < nPolyCount; a++)
{
basegfx::B2DPolygon aCandidate(rPolyPolygon.getB2DPolygon(a));
if(aRetval.count())
{
if(aCandidate.count())
{
const basegfx::B2DPoint aCA(aCandidate.getB2DPoint(0));
const basegfx::B2DPoint aCB(aCandidate.getB2DPoint(aCandidate.count() - 1));
const basegfx::B2DPoint aRA(aRetval.getB2DPoint(0));
const basegfx::B2DPoint aRB(aRetval.getB2DPoint(aRetval.count() - 1));
const double fRACA(basegfx::B2DVector(aCA - aRA).getLength());
const double fRACB(basegfx::B2DVector(aCB - aRA).getLength());
const double fRBCA(basegfx::B2DVector(aCA - aRB).getLength());
const double fRBCB(basegfx::B2DVector(aCB - aRB).getLength());
const double fSmallestRA(std::min(fRACA, fRACB));
const double fSmallestRB(std::min(fRBCA, fRBCB));
if(fSmallestRA < fSmallestRB)
{
// flip result
aRetval.flip();
}
const double fSmallestCA(std::min(fRACA, fRBCA));
const double fSmallestCB(std::min(fRACB, fRBCB));
if(fSmallestCB < fSmallestCA)
{
// flip candidate
aCandidate.flip();
}
// append candidate to retval
aRetval.append(aCandidate);
}
}
else
{
aRetval = aCandidate;
}
}
return aRetval;
}
}
// for distribution dialog function
struct ImpDistributeEntry
{
SdrObject* mpObj;
sal_Int32 mnPos;
sal_Int32 mnLength;
};
typedef vector<ImpDistributeEntry> ImpDistributeEntryList;
void SdrEditView::DistributeMarkedObjects(weld::Window* pParent)
{
const size_t nMark(GetMarkedObjectCount());
if(nMark > 2)
{
SfxItemSet aNewAttr(mpModel->GetItemPool());
SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
ScopedVclPtr<AbstractSvxDistributeDialog> pDlg(pFact->CreateSvxDistributeDialog(pParent, aNewAttr));
sal_uInt16 nResult = pDlg->Execute();
if(nResult == RET_OK)
{
SvxDistributeHorizontal eHor = pDlg->GetDistributeHor();
SvxDistributeVertical eVer = pDlg->GetDistributeVer();
ImpDistributeEntryList aEntryList;
ImpDistributeEntryList::iterator itEntryList;
sal_uInt32 nFullLength;
const bool bUndo = IsUndoEnabled();
if( bUndo )
BegUndo();
if(eHor != SvxDistributeHorizontal::NONE)
{
// build sorted entry list
nFullLength = 0;
for( size_t a = 0; a < nMark; ++a )
{
SdrMark* pMark = GetSdrMarkByIndex(a);
ImpDistributeEntry aNew;
aNew.mpObj = pMark->GetMarkedSdrObj();
switch(eHor)
{
case SvxDistributeHorizontal::Left:
{
aNew.mnPos = aNew.mpObj->GetSnapRect().Left();
break;
}
case SvxDistributeHorizontal::Center:
{
aNew.mnPos = (aNew.mpObj->GetSnapRect().Right() + aNew.mpObj->GetSnapRect().Left()) / 2;
break;
}
case SvxDistributeHorizontal::Distance:
{
aNew.mnLength = aNew.mpObj->GetSnapRect().GetWidth() + 1;
nFullLength += aNew.mnLength;
aNew.mnPos = (aNew.mpObj->GetSnapRect().Right() + aNew.mpObj->GetSnapRect().Left()) / 2;
break;
}
case SvxDistributeHorizontal::Right:
{
aNew.mnPos = aNew.mpObj->GetSnapRect().Right();
break;
}
default: break;
}
itEntryList = std::find_if(aEntryList.begin(), aEntryList.end(),
[&aNew](const ImpDistributeEntry& rEntry) { return rEntry.mnPos >= aNew.mnPos; });
if ( itEntryList < aEntryList.end() )
aEntryList.insert( itEntryList, aNew );
else
aEntryList.push_back( aNew );
}
if(eHor == SvxDistributeHorizontal::Distance)
{
// calculate room in-between
sal_Int32 nWidth = GetAllMarkedBoundRect().GetWidth() + 1;
double fStepWidth = (static_cast<double>(nWidth) - static_cast<double>(nFullLength)) / static_cast<double>(aEntryList.size() - 1);
double fStepStart = static_cast<double>(aEntryList[ 0 ].mnPos);
fStepStart += fStepWidth + static_cast<double>((aEntryList[ 0 ].mnLength + aEntryList[ 1 ].mnLength) / 2);
// move entries 1..n-1
for( size_t i = 1, n = aEntryList.size()-1; i < n; ++i )
{
ImpDistributeEntry& rCurr = aEntryList[ i ];
ImpDistributeEntry& rNext = aEntryList[ i + 1];
sal_Int32 nDelta = static_cast<sal_Int32>(fStepStart + 0.5) - rCurr.mnPos;
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*rCurr.mpObj));
rCurr.mpObj->Move(Size(nDelta, 0));
fStepStart += fStepWidth + static_cast<double>((rCurr.mnLength + rNext.mnLength) / 2);
}
}
else
{
// calculate distances
sal_Int32 nWidth = aEntryList[ aEntryList.size() - 1 ].mnPos - aEntryList[ 0 ].mnPos;
double fStepWidth = static_cast<double>(nWidth) / static_cast<double>(aEntryList.size() - 1);
double fStepStart = static_cast<double>(aEntryList[ 0 ].mnPos);
fStepStart += fStepWidth;
// move entries 1..n-1
for( size_t i = 1 ; i < aEntryList.size()-1 ; ++i )
{
ImpDistributeEntry& rCurr = aEntryList[ i ];
sal_Int32 nDelta = static_cast<sal_Int32>(fStepStart + 0.5) - rCurr.mnPos;
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*rCurr.mpObj));
rCurr.mpObj->Move(Size(nDelta, 0));
fStepStart += fStepWidth;
}
}
// clear list
aEntryList.clear();
}
if(eVer != SvxDistributeVertical::NONE)
{
// build sorted entry list
nFullLength = 0;
for( size_t a = 0; a < nMark; ++a )
{
SdrMark* pMark = GetSdrMarkByIndex(a);
ImpDistributeEntry aNew;
aNew.mpObj = pMark->GetMarkedSdrObj();
switch(eVer)
{
case SvxDistributeVertical::Top:
{
aNew.mnPos = aNew.mpObj->GetSnapRect().Top();
break;
}
case SvxDistributeVertical::Center:
{
aNew.mnPos = (aNew.mpObj->GetSnapRect().Bottom() + aNew.mpObj->GetSnapRect().Top()) / 2;
break;
}
case SvxDistributeVertical::Distance:
{
aNew.mnLength = aNew.mpObj->GetSnapRect().GetHeight() + 1;
nFullLength += aNew.mnLength;
aNew.mnPos = (aNew.mpObj->GetSnapRect().Bottom() + aNew.mpObj->GetSnapRect().Top()) / 2;
break;
}
case SvxDistributeVertical::Bottom:
{
aNew.mnPos = aNew.mpObj->GetSnapRect().Bottom();
break;
}
default: break;
}
itEntryList = std::find_if(aEntryList.begin(), aEntryList.end(),
[&aNew](const ImpDistributeEntry& rEntry) { return rEntry.mnPos >= aNew.mnPos; });
if ( itEntryList < aEntryList.end() )
aEntryList.insert( itEntryList, aNew );
else
aEntryList.push_back( aNew );
}
if(eVer == SvxDistributeVertical::Distance)
{
// calculate room in-between
sal_Int32 nHeight = GetAllMarkedBoundRect().GetHeight() + 1;
double fStepWidth = (static_cast<double>(nHeight) - static_cast<double>(nFullLength)) / static_cast<double>(aEntryList.size() - 1);
double fStepStart = static_cast<double>(aEntryList[ 0 ].mnPos);
fStepStart += fStepWidth + static_cast<double>((aEntryList[ 0 ].mnLength + aEntryList[ 1 ].mnLength) / 2);
// move entries 1..n-1
for( size_t i = 1, n = aEntryList.size()-1; i < n; ++i)
{
ImpDistributeEntry& rCurr = aEntryList[ i ];
ImpDistributeEntry& rNext = aEntryList[ i + 1 ];
sal_Int32 nDelta = static_cast<sal_Int32>(fStepStart + 0.5) - rCurr.mnPos;
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*rCurr.mpObj));
rCurr.mpObj->Move(Size(0, nDelta));
fStepStart += fStepWidth + static_cast<double>((rCurr.mnLength + rNext.mnLength) / 2);
}
}
else
{
// calculate distances
sal_Int32 nHeight = aEntryList[ aEntryList.size() - 1 ].mnPos - aEntryList[ 0 ].mnPos;
double fStepWidth = static_cast<double>(nHeight) / static_cast<double>(aEntryList.size() - 1);
double fStepStart = static_cast<double>(aEntryList[ 0 ].mnPos);
fStepStart += fStepWidth;
// move entries 1..n-1
for(size_t i = 1, n = aEntryList.size()-1; i < n; ++i)
{
ImpDistributeEntry& rCurr = aEntryList[ i ];
sal_Int32 nDelta = static_cast<sal_Int32>(fStepStart + 0.5) - rCurr.mnPos;
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*rCurr.mpObj));
rCurr.mpObj->Move(Size(0, nDelta));
fStepStart += fStepWidth;
}
}
// clear list
aEntryList.clear();
}
// UNDO-Comment and end of UNDO
mpModel->SetUndoComment(SvxResId(STR_DistributeMarkedObjects));
if( bUndo )
EndUndo();
}
}
}
void SdrEditView::MergeMarkedObjects(SdrMergeMode eMode)
{
// #i73441# check content
if(!AreObjectsMarked())
return;
SdrMarkList aRemove;
SortMarkedObjects();
const bool bUndo = IsUndoEnabled();
if( bUndo )
BegUndo();
size_t nInsPos = SAL_MAX_SIZE;
const SdrObject* pAttrObj = nullptr;
basegfx::B2DPolyPolygon aMergePolyPolygonA;
basegfx::B2DPolyPolygon aMergePolyPolygonB;
SdrObjList* pInsOL = nullptr;
SdrPageView* pInsPV = nullptr;
bool bFirstObjectComplete(false);
// make sure selected objects are contour objects
// since now basegfx::utils::adaptiveSubdivide() is used, it is no longer
// necessary to use ConvertMarkedToPolyObj which will subdivide curves using the old
// mechanisms. In a next step the polygon clipper will even be able to clip curves...
// ConvertMarkedToPolyObj(true);
ConvertMarkedToPathObj(true);
OSL_ENSURE(AreObjectsMarked(), "no more objects selected after preparations (!)");
for(size_t a=0; a<GetMarkedObjectCount(); ++a)
{
SdrMark* pM = GetSdrMarkByIndex(a);
SdrObject* pObj = pM->GetMarkedSdrObj();
if(ImpCanConvertForCombine(pObj))
{
if(!pAttrObj)
pAttrObj = pObj;
nInsPos = pObj->GetOrdNum() + 1;
pInsPV = pM->GetPageView();
pInsOL = pObj->getParentSdrObjListFromSdrObject();
// #i76891# use single iteration from SJ here which works on SdrObjects and takes
// groups into account by itself
SdrObjListIter aIter(*pObj, SdrIterMode::DeepWithGroups);
while(aIter.IsMore())
{
SdrObject* pCandidate = aIter.Next();
SdrPathObj* pPathObj = dynamic_cast<SdrPathObj*>( pCandidate );
if(pPathObj)
{
basegfx::B2DPolyPolygon aTmpPoly(pPathObj->GetPathPoly());
// #i76891# unfortunately ConvertMarkedToPathObj has converted all
// involved polygon data to curve segments, even if not necessary.
// It is better to try to reduce to more simple polygons.
aTmpPoly = basegfx::utils::simplifyCurveSegments(aTmpPoly);
// for each part polygon as preparation, remove self-intersections
// correct orientations and get rid of possible neutral polygons.
aTmpPoly = basegfx::utils::prepareForPolygonOperation(aTmpPoly);
if(!bFirstObjectComplete)
{
// #i111987# Also need to collect ORed source shape when more than
// a single polygon is involved
if(aMergePolyPolygonA.count())
{
aMergePolyPolygonA = basegfx::utils::solvePolygonOperationOr(aMergePolyPolygonA, aTmpPoly);
}
else
{
aMergePolyPolygonA = aTmpPoly;
}
}
else
{
if(aMergePolyPolygonB.count())
{
// to topologically correctly collect the 2nd polygon
// group it is necessary to OR the parts (each is seen as
// XOR-FillRule polygon and they are drawn over each-other)
aMergePolyPolygonB = basegfx::utils::solvePolygonOperationOr(aMergePolyPolygonB, aTmpPoly);
}
else
{
aMergePolyPolygonB = aTmpPoly;
}
}
}
}
// was there something added to the first polygon?
if(!bFirstObjectComplete && aMergePolyPolygonA.count())
{
bFirstObjectComplete = true;
}
// move object to temporary delete list
aRemove.InsertEntry(SdrMark(pObj, pM->GetPageView()));
}
}
switch(eMode)
{
case SdrMergeMode::Merge:
{
// merge all contained parts (OR)
aMergePolyPolygonA = basegfx::utils::solvePolygonOperationOr(aMergePolyPolygonA, aMergePolyPolygonB);
break;
}
case SdrMergeMode::Subtract:
{
// Subtract B from A
aMergePolyPolygonA = basegfx::utils::solvePolygonOperationDiff(aMergePolyPolygonA, aMergePolyPolygonB);
break;
}
case SdrMergeMode::Intersect:
{
// AND B and A
aMergePolyPolygonA = basegfx::utils::solvePolygonOperationAnd(aMergePolyPolygonA, aMergePolyPolygonB);
break;
}
}
// #i73441# check insert list before taking actions
if(pInsOL)
{
SdrPathObj* pPath = new SdrPathObj(pAttrObj->getSdrModelFromSdrObject(), OBJ_PATHFILL, aMergePolyPolygonA);
ImpCopyAttributes(pAttrObj, pPath);
pInsOL->InsertObject(pPath, nInsPos);
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pPath));
// #i124760# To have a correct selection with only the new object it is necessary to
// unmark all objects first. If not doing so, there may remain invalid pointers to objects
// TTTT:Not needed for aw080 (!)
UnmarkAllObj(pInsPV);
MarkObj(pPath, pInsPV, false, true);
}
aRemove.ForceSort();
switch(eMode)
{
case SdrMergeMode::Merge:
{
SetUndoComment(
SvxResId(STR_EditMergeMergePoly),
aRemove.GetMarkDescription());
break;
}
case SdrMergeMode::Subtract:
{
SetUndoComment(
SvxResId(STR_EditMergeSubstractPoly),
aRemove.GetMarkDescription());
break;
}
case SdrMergeMode::Intersect:
{
SetUndoComment(
SvxResId(STR_EditMergeIntersectPoly),
aRemove.GetMarkDescription());
break;
}
}
DeleteMarkedList(aRemove);
if( bUndo )
EndUndo();
}
void SdrEditView::EqualizeMarkedObjects(bool bWidth)
{
const SdrMarkList& rMarkList = GetMarkedObjectList();
size_t nMarked = rMarkList.GetMarkCount();
if (nMarked < 2)
return;
size_t nLastSelected = 0;
sal_Int64 nLastSelectedTime = rMarkList.GetMark(0)->getTimeStamp();
for (size_t a = 1; a < nMarked; ++a)
{
sal_Int64 nCandidateTime = rMarkList.GetMark(a)->getTimeStamp();
if (nCandidateTime > nLastSelectedTime)
{
nLastSelectedTime = nCandidateTime;
nLastSelected = a;
}
}
SdrObject* pLastSelectedObj = rMarkList.GetMark(nLastSelected)->GetMarkedSdrObj();
Size aLastRectSize(pLastSelectedObj->GetLogicRect().GetSize());
const bool bUndo = IsUndoEnabled();
if (bUndo)
BegUndo();
for (size_t a = 0; a < nMarked; ++a)
{
if (a == nLastSelected)
continue;
SdrMark* pM = rMarkList.GetMark(a);
SdrObject* pObj = pM->GetMarkedSdrObj();
tools::Rectangle aLogicRect(pObj->GetLogicRect());
Size aLogicRectSize(aLogicRect.GetSize());
if (bWidth)
aLogicRectSize.setWidth( aLastRectSize.Width() );
else
aLogicRectSize.setHeight( aLastRectSize.Height() );
aLogicRect.SetSize(aLogicRectSize);
if (bUndo)
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
pObj->SetLogicRect(aLogicRect);
}
SetUndoComment(
SvxResId(bWidth ? STR_EqualizeWidthMarkedObjects : STR_EqualizeHeightMarkedObjects),
rMarkList.GetMarkDescription());
if (bUndo)
EndUndo();
}
void SdrEditView::CombineMarkedTextObjects()
{
SdrPageView* pPageView = GetSdrPageView();
if ( !pPageView || pPageView->IsLayerLocked( GetActiveLayer() ) )
return;
bool bUndo = IsUndoEnabled();
// Undo-String will be set later
if ( bUndo )
BegUndo();
SdrOutliner& rDrawOutliner = getSdrModelFromSdrView().GetDrawOutliner();
SdrObjListIter aIter( GetMarkedObjectList(), SdrIterMode::Flat);
while ( aIter.IsMore() )
{
SdrObject* pObj = aIter.Next();
SdrTextObj* pTextObj = dynamic_cast<SdrTextObj*>( pObj );
const OutlinerParaObject* pOPO = pTextObj ? pTextObj->GetOutlinerParaObject() : nullptr;
if ( pOPO && pTextObj->IsTextFrame()
&& pTextObj->GetObjIdentifier() == OBJ_TEXT // not callouts (OBJ_CAPTION)
&& !pTextObj->IsOutlText() // not impress presentation objects
&& pTextObj->GetMergedItem(XATTR_FORMTXTSTYLE).GetValue() == XFormTextStyle::NONE // not Fontwork
)
{
// if the last paragraph does not end in paragraph-end punctuation (ignoring whitespace),
// assume this text should be added to the end of the last paragraph, instead of starting a new paragraph.
const sal_Int32 nPara = rDrawOutliner.GetParagraphCount();
const OUString sLastPara = nPara ? rDrawOutliner.GetText( rDrawOutliner.GetParagraph( nPara - 1 ) ) : "";
sal_Int32 n = sLastPara.getLength();
while ( n && unicode::isWhiteSpace( sLastPara[--n] ) )
;
//TODO: find way to use Locale to identify sentence final punctuation. Copied IsSentenceAtEnd() from autofmt.cxx
const bool bAppend = !n || ( sLastPara[n] != '.' && sLastPara[n] != '?' && sLastPara[n] != '!' );
rDrawOutliner.AddText( *pOPO, bAppend );
}
else
{
// Unmark non-textboxes, because all marked objects are deleted at the end. AdjustMarkHdl later.
MarkObj(pObj, pPageView, /*bUnmark=*/true, /*bImpNoSetMarkHdl=*/true);
}
}
MarkListHasChanged();
AdjustMarkHdl();
if ( GetMarkedObjectCount() > 1 )
{
SdrRectObj* pReplacement = new SdrRectObj( getSdrModelFromSdrView(), OBJ_TEXT );
pReplacement->SetOutlinerParaObject( rDrawOutliner.CreateParaObject() );
pReplacement->SetSnapRect( GetMarkedObjRect() );
const SdrInsertFlags nFlags = SdrInsertFlags::DONTMARK | SdrInsertFlags::SETDEFLAYER;
if ( InsertObjectAtView( pReplacement, *pPageView, nFlags ) )
DeleteMarkedObj();
}
if ( bUndo )
EndUndo();
return;
}
void SdrEditView::CombineMarkedObjects(bool bNoPolyPoly)
{
// #105899# Start of Combine-Undo put to front, else ConvertMarkedToPolyObj would
// create a 2nd Undo-action and Undo-Comment.
bool bUndo = IsUndoEnabled();
// Undo-String will be set later
if( bUndo )
BegUndo("", "", bNoPolyPoly ? SdrRepeatFunc::CombineOnePoly : SdrRepeatFunc::CombinePolyPoly);
// #105899# First, guarantee that all objects are converted to polyobjects,
// especially for SdrGrafObj with bitmap filling this is necessary to not
// lose the bitmap filling.
// #i12392#
// ConvertMarkedToPolyObj was too strong here, it will lose quality and
// information when curve objects are combined. This can be replaced by
// using ConvertMarkedToPathObj without changing the previous fix.
// #i21250#
// Instead of simply passing true as LineToArea, use bNoPolyPoly as info
// if this command is a 'Combine' or a 'Connect' command. On Connect it's true.
// To not concert line segments with a set line width to polygons in that case,
// use this info. Do not convert LineToArea on Connect commands.
// ConvertMarkedToPathObj(!bNoPolyPoly);
// This is used for Combine and Connect. In no case it is necessary to force
// the content to curve, but it is also not good to force to polygons. Thus,
// curve is the less information losing one. Remember: This place is not
// used for merge.
// LineToArea is never necessary, both commands are able to take over the
// set line style and to display it correctly. Thus, i will use a
// ConvertMarkedToPathObj with a false in any case. Only drawback is that
// simple polygons will be changed to curves, but with no information loss.
ConvertMarkedToPathObj(false /* bLineToArea */);
// continue as before
basegfx::B2DPolyPolygon aPolyPolygon;
SdrObjList* pCurrentOL = nullptr;
SdrMarkList aRemoveBuffer;
SortMarkedObjects();
size_t nInsPos = SAL_MAX_SIZE;
SdrObjList* pInsOL = nullptr;
SdrPageView* pInsPV = nullptr;
const SdrObject* pAttrObj = nullptr;
for(size_t a = GetMarkedObjectCount(); a; )
{
--a;
SdrMark* pM = GetSdrMarkByIndex(a);
SdrObject* pObj = pM->GetMarkedSdrObj();
SdrObjList* pThisOL = pObj->getParentSdrObjListFromSdrObject();
if(pCurrentOL != pThisOL)
{
pCurrentOL = pThisOL;
}
if(ImpCanConvertForCombine(pObj))
{
// remember objects to be able to copy attributes
pAttrObj = pObj;
// unfortunately ConvertMarkedToPathObj has converted all
// involved polygon data to curve segments, even if not necessary.
// It is better to try to reduce to more simple polygons.
basegfx::B2DPolyPolygon aTmpPoly(basegfx::utils::simplifyCurveSegments(ImpGetPolyPolygon(pObj)));
aPolyPolygon.insert(0L, aTmpPoly);
if(!pInsOL)
{
nInsPos = pObj->GetOrdNum() + 1;
pInsPV = pM->GetPageView();
pInsOL = pObj->getParentSdrObjListFromSdrObject();
}
aRemoveBuffer.InsertEntry(SdrMark(pObj, pM->GetPageView()));
}
}
if(bNoPolyPoly)
{
basegfx::B2DPolygon aCombinedPolygon(ImpCombineToSinglePolygon(aPolyPolygon));
aPolyPolygon.clear();
aPolyPolygon.append(aCombinedPolygon);
}
const sal_uInt32 nPolyCount(aPolyPolygon.count());
if (nPolyCount && pAttrObj)
{
SdrObjKind eKind = OBJ_PATHFILL;
if(nPolyCount > 1)
{
aPolyPolygon.setClosed(true);
}
else
{
// check for Polyline
const basegfx::B2DPolygon aPolygon(aPolyPolygon.getB2DPolygon(0));
const sal_uInt32 nPointCount(aPolygon.count());
if(nPointCount <= 2)
{
eKind = OBJ_PATHLINE;
}
else
{
if(!aPolygon.isClosed())
{
const basegfx::B2DPoint aPointA(aPolygon.getB2DPoint(0));
const basegfx::B2DPoint aPointB(aPolygon.getB2DPoint(nPointCount - 1));
const double fDistance(basegfx::B2DVector(aPointB - aPointA).getLength());
const double fJoinTolerance(10.0);
if(fDistance < fJoinTolerance)
{
aPolyPolygon.setClosed(true);
}
else
{
eKind = OBJ_PATHLINE;
}
}
}
}
SdrPathObj* pPath = new SdrPathObj(pAttrObj->getSdrModelFromSdrObject(), eKind, aPolyPolygon);
// attributes of the lowest object
ImpCopyAttributes(pAttrObj, pPath);
// If LineStyle of pAttrObj is drawing::LineStyle_NONE force to drawing::LineStyle_SOLID to make visible.
const drawing::LineStyle eLineStyle = pAttrObj->GetMergedItem(XATTR_LINESTYLE).GetValue();
const drawing::FillStyle eFillStyle = pAttrObj->GetMergedItem(XATTR_FILLSTYLE).GetValue();
// Take fill style/closed state of pAttrObj in account when deciding to change the line style
bool bIsClosedPathObj(dynamic_cast<const SdrPathObj*>( pAttrObj) != nullptr && static_cast<const SdrPathObj*>(pAttrObj)->IsClosed());
if(drawing::LineStyle_NONE == eLineStyle && (drawing::FillStyle_NONE == eFillStyle || !bIsClosedPathObj))
{
pPath->SetMergedItem(XLineStyleItem(drawing::LineStyle_SOLID));
}
pInsOL->InsertObject(pPath,nInsPos);
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pPath));
// Here was a severe error: Without UnmarkAllObj, the new object was marked
// additionally to the two ones which are deleted below. As long as those are
// in the UNDO there is no problem, but as soon as they get deleted, the
// MarkList will contain deleted objects -> GPF.
UnmarkAllObj(pInsPV);
MarkObj(pPath, pInsPV, false, true);
}
// build an UndoComment from the objects actually used
aRemoveBuffer.ForceSort(); // important for remove (see below)
if( bUndo )
SetUndoComment(SvxResId(bNoPolyPoly?STR_EditCombine_OnePoly:STR_EditCombine_PolyPoly),aRemoveBuffer.GetMarkDescription());
// remove objects actually used from the list
DeleteMarkedList(aRemoveBuffer);
if( bUndo )
EndUndo();
}
// Dismantle
bool SdrEditView::ImpCanDismantle(const basegfx::B2DPolyPolygon& rPpolyPolygon, bool bMakeLines)
{
bool bCan(false);
const sal_uInt32 nPolygonCount(rPpolyPolygon.count());
if(nPolygonCount >= 2)
{
// #i69172# dismantle makes sense with 2 or more polygons in a polyPolygon
bCan = true;
}
else if(bMakeLines && 1 == nPolygonCount)
{
// #i69172# ..or with at least 2 edges (curves or lines)
const basegfx::B2DPolygon& aPolygon(rPpolyPolygon.getB2DPolygon(0));
const sal_uInt32 nPointCount(aPolygon.count());
if(nPointCount > 2)
{
bCan = true;
}
}
return bCan;
}
bool SdrEditView::ImpCanDismantle(const SdrObject* pObj, bool bMakeLines)
{
bool bOtherObjs(false); // true=objects other than PathObj's existent
bool bMin1PolyPoly(false); // true=at least 1 tools::PolyPolygon with more than one Polygon existent
SdrObjList* pOL = pObj->GetSubList();
if(pOL)
{
// group object -- check all members if they're PathObjs
SdrObjListIter aIter(pOL, SdrIterMode::DeepNoGroups);
while(aIter.IsMore() && !bOtherObjs)
{
const SdrObject* pObj1 = aIter.Next();
const SdrPathObj* pPath = dynamic_cast<const SdrPathObj*>( pObj1 );
if(pPath)
{
if(ImpCanDismantle(pPath->GetPathPoly(), bMakeLines))
{
bMin1PolyPoly = true;
}
SdrObjTransformInfoRec aInfo;
pObj1->TakeObjInfo(aInfo);
if(!aInfo.bCanConvToPath)
{
// happens e. g. in the case of FontWork
bOtherObjs = true;
}
}
else
{
bOtherObjs = true;
}
}
}
else
{
const SdrPathObj* pPath = dynamic_cast<const SdrPathObj*>(pObj);
const SdrObjCustomShape* pCustomShape = dynamic_cast<const SdrObjCustomShape*>(pObj);
// #i37011#
if(pPath)
{
if(ImpCanDismantle(pPath->GetPathPoly(),bMakeLines))
{
bMin1PolyPoly = true;
}
SdrObjTransformInfoRec aInfo;
pObj->TakeObjInfo(aInfo);
// new condition IsLine() to be able to break simple Lines
if(!(aInfo.bCanConvToPath || aInfo.bCanConvToPoly) && !pPath->IsLine())
{
// happens e. g. in the case of FontWork
bOtherObjs = true;
}
}
else if(pCustomShape)
{
if(bMakeLines)
{
// allow break command
bMin1PolyPoly = true;
}
}
else
{
bOtherObjs = true;
}
}
return bMin1PolyPoly && !bOtherObjs;
}
void SdrEditView::ImpDismantleOneObject(const SdrObject* pObj, SdrObjList& rOL, size_t& rPos, SdrPageView* pPV, bool bMakeLines)
{
const SdrPathObj* pSrcPath = dynamic_cast<const SdrPathObj*>( pObj );
const SdrObjCustomShape* pCustomShape = dynamic_cast<const SdrObjCustomShape*>( pObj );
const bool bUndo = IsUndoEnabled();
if(pSrcPath)
{
// #i74631# redesigned due to XpolyPolygon removal and explicit constructors
SdrObject* pLast = nullptr; // to be able to apply OutlinerParaObject
const basegfx::B2DPolyPolygon& rPolyPolygon(pSrcPath->GetPathPoly());
const sal_uInt32 nPolyCount(rPolyPolygon.count());
for(sal_uInt32 a(0); a < nPolyCount; a++)
{
const basegfx::B2DPolygon& rCandidate(rPolyPolygon.getB2DPolygon(a));
const sal_uInt32 nPointCount(rCandidate.count());
if(!bMakeLines || nPointCount < 2)
{
SdrPathObj* pPath = new SdrPathObj(
pSrcPath->getSdrModelFromSdrObject(),
static_cast<SdrObjKind>(pSrcPath->GetObjIdentifier()),
basegfx::B2DPolyPolygon(rCandidate));
ImpCopyAttributes(pSrcPath, pPath);
pLast = pPath;
rOL.InsertObject(pPath, rPos);
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pPath, true));
MarkObj(pPath, pPV, false, true);
rPos++;
}
else
{
const sal_uInt32 nLoopCount(rCandidate.isClosed() ? nPointCount : nPointCount - 1);
for(sal_uInt32 b(0); b < nLoopCount; b++)
{
SdrObjKind eKind(OBJ_PLIN);
basegfx::B2DPolygon aNewPolygon;
const sal_uInt32 nNextIndex((b + 1) % nPointCount);
aNewPolygon.append(rCandidate.getB2DPoint(b));
if(rCandidate.areControlPointsUsed())
{
aNewPolygon.appendBezierSegment(
rCandidate.getNextControlPoint(b),
rCandidate.getPrevControlPoint(nNextIndex),
rCandidate.getB2DPoint(nNextIndex));
eKind = OBJ_PATHLINE;
}
else
{
aNewPolygon.append(rCandidate.getB2DPoint(nNextIndex));
}
SdrPathObj* pPath = new SdrPathObj(
pSrcPath->getSdrModelFromSdrObject(),
eKind,
basegfx::B2DPolyPolygon(aNewPolygon));
ImpCopyAttributes(pSrcPath, pPath);
pLast = pPath;
rOL.InsertObject(pPath, rPos);
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pPath, true));
MarkObj(pPath, pPV, false, true);
rPos++;
}
}
}
if(pLast && pSrcPath->GetOutlinerParaObject())
{
pLast->SetOutlinerParaObject(std::make_unique<OutlinerParaObject>(*pSrcPath->GetOutlinerParaObject()));
}
}
else if(pCustomShape)
{
if(bMakeLines)
{
// break up custom shape
const SdrObject* pReplacement = pCustomShape->GetSdrObjectFromCustomShape();
if(pReplacement)
{
SdrObject* pCandidate(pReplacement->CloneSdrObject(pReplacement->getSdrModelFromSdrObject()));
DBG_ASSERT(pCandidate, "SdrEditView::ImpDismantleOneObject: Could not clone SdrObject (!)");
if(pCustomShape->GetMergedItem(SDRATTR_SHADOW).GetValue())
{
if(dynamic_cast<const SdrObjGroup*>( pReplacement) != nullptr)
{
pCandidate->SetMergedItem(makeSdrShadowItem(true));
}
}
rOL.InsertObject(pCandidate, rPos);
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pCandidate, true));
MarkObj(pCandidate, pPV, false, true);
if(pCustomShape->HasText() && !pCustomShape->IsTextPath())
{
// #i37011# also create a text object and add at rPos + 1
SdrObject* pTextObj = SdrObjFactory::MakeNewObject(
pCustomShape->getSdrModelFromSdrObject(),
pCustomShape->GetObjInventor(),
OBJ_TEXT);
// Copy text content
OutlinerParaObject* pParaObj = pCustomShape->GetOutlinerParaObject();
if(pParaObj)
{
pTextObj->NbcSetOutlinerParaObject(std::make_unique<OutlinerParaObject>(*pParaObj));
}
// copy all attributes
SfxItemSet aTargetItemSet(pCustomShape->GetMergedItemSet());
// clear fill and line style
aTargetItemSet.Put(XLineStyleItem(drawing::LineStyle_NONE));
aTargetItemSet.Put(XFillStyleItem(drawing::FillStyle_NONE));
// get the text bounds and set at text object
tools::Rectangle aTextBounds = pCustomShape->GetSnapRect();
if(pCustomShape->GetTextBounds(aTextBounds))
{
pTextObj->SetSnapRect(aTextBounds);
}
// if rotated, copy GeoStat, too.
const GeoStat& rSourceGeo = pCustomShape->GetGeoStat();
if(rSourceGeo.nRotationAngle)
{
pTextObj->NbcRotate(
pCustomShape->GetSnapRect().Center(), rSourceGeo.nRotationAngle,
rSourceGeo.nSin, rSourceGeo.nCos);
}
// set modified ItemSet at text object
pTextObj->SetMergedItemSet(aTargetItemSet);
// insert object
rOL.InsertObject(pTextObj, rPos + 1);
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pTextObj, true));
MarkObj(pTextObj, pPV, false, true);
}
}
}
}
}
void SdrEditView::DismantleMarkedObjects(bool bMakeLines)
{
// temporary MarkList
SdrMarkList aRemoveBuffer;
SortMarkedObjects();
const bool bUndo = IsUndoEnabled();
if( bUndo )
{
// comment is constructed later
BegUndo("", "", bMakeLines ? SdrRepeatFunc::DismantleLines : SdrRepeatFunc::DismantlePolys);
}
SdrObjList* pOL0=nullptr;
for (size_t nm=GetMarkedObjectCount(); nm>0;) {
--nm;
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pObj=pM->GetMarkedSdrObj();
SdrPageView* pPV=pM->GetPageView();
SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
if (pOL!=pOL0) { pOL0=pOL; pObj->GetOrdNum(); } // make sure OrdNums are correct!
if (ImpCanDismantle(pObj,bMakeLines)) {
aRemoveBuffer.InsertEntry(SdrMark(pObj,pM->GetPageView()));
const size_t nPos0=pObj->GetOrdNumDirect();
size_t nPos=nPos0+1;
SdrObjList* pSubList=pObj->GetSubList();
if (pSubList!=nullptr && !pObj->Is3DObj()) {
SdrObjListIter aIter(pSubList,SdrIterMode::DeepNoGroups);
while (aIter.IsMore()) {
const SdrObject* pObj1=aIter.Next();
ImpDismantleOneObject(pObj1,*pOL,nPos,pPV,bMakeLines);
}
} else {
ImpDismantleOneObject(pObj,*pOL,nPos,pPV,bMakeLines);
}
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj,true));
pOL->RemoveObject(nPos0);
if( !bUndo )
SdrObject::Free(pObj);
}
}
if( bUndo )
{
// construct UndoComment from objects actually used
SetUndoComment(SvxResId(bMakeLines?STR_EditDismantle_Lines:STR_EditDismantle_Polys),aRemoveBuffer.GetMarkDescription());
// remove objects actually used from the list
EndUndo();
}
}
// Group
void SdrEditView::GroupMarked()
{
if (AreObjectsMarked())
{
SortMarkedObjects();
const bool bUndo = IsUndoEnabled();
if( bUndo )
{
BegUndo(SvxResId(STR_EditGroup),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::Group);
for(size_t nm = GetMarkedObjectCount(); nm>0; )
{
// add UndoActions for all affected objects
--nm;
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pObj = pM->GetMarkedSdrObj();
AddUndoActions( CreateConnectorUndo( *pObj ) );
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoRemoveObject( *pObj ));
}
}
SdrMarkList aNewMark;
SdrPageView* pPV = GetSdrPageView();
if(pPV)
{
SdrObjList* pCurrentLst=pPV->GetObjList();
SdrObjList* pSrcLst=pCurrentLst;
SdrObjList* pSrcLst0=pSrcLst;
// make sure OrdNums are correct
if (pSrcLst->IsObjOrdNumsDirty())
pSrcLst->RecalcObjOrdNums();
SdrObject* pGrp=nullptr;
SdrObjList* pDstLst=nullptr;
// if all selected objects come from foreign object lists.
// the group object is the last one in the list.
size_t nInsPos=pSrcLst->GetObjCount();
bool bNeedInsPos=true;
for (size_t nm=GetMarkedObjectCount(); nm>0;)
{
--nm;
SdrMark* pM=GetSdrMarkByIndex(nm);
if (pM->GetPageView()==pPV)
{
SdrObject* pObj=pM->GetMarkedSdrObj();
if (nullptr==pGrp)
{
pGrp = new SdrObjGroup(pObj->getSdrModelFromSdrObject());
pDstLst=pGrp->GetSubList();
DBG_ASSERT(pDstLst!=nullptr,"Alleged group object doesn't return object list.");
}
pSrcLst=pObj->getParentSdrObjListFromSdrObject();
if (pSrcLst!=pSrcLst0)
{
if (pSrcLst->IsObjOrdNumsDirty())
pSrcLst->RecalcObjOrdNums();
}
bool bForeignList=pSrcLst!=pCurrentLst;
if (!bForeignList && bNeedInsPos)
{
nInsPos=pObj->GetOrdNum(); // this way, all ObjOrdNum of the page are set
nInsPos++;
bNeedInsPos=false;
}
pSrcLst->RemoveObject(pObj->GetOrdNumDirect());
if (!bForeignList)
nInsPos--; // correct InsertPos
pDstLst->InsertObject(pObj,0);
GetMarkedObjectListWriteAccess().DeleteMark(nm);
pSrcLst0=pSrcLst;
}
}
if (pGrp!=nullptr)
{
aNewMark.InsertEntry(SdrMark(pGrp,pPV));
const size_t nCount=pDstLst->GetObjCount();
pCurrentLst->InsertObject(pGrp,nInsPos);
if( bUndo )
{
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pGrp,true)); // no recalculation!
for (size_t no=0; no<nCount; ++no)
{
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoInsertObject(*pDstLst->GetObj(no)));
}
}
}
}
GetMarkedObjectListWriteAccess().Merge(aNewMark);
MarkListHasChanged();
if( bUndo )
EndUndo();
}
}
// Ungroup
void SdrEditView::UnGroupMarked()
{
SdrMarkList aNewMark;
const bool bUndo = IsUndoEnabled();
if( bUndo )
BegUndo("", "", SdrRepeatFunc::Ungroup);
size_t nCount=0;
OUString aName1;
OUString aName;
bool bNameOk=false;
for (size_t nm=GetMarkedObjectCount(); nm>0;) {
--nm;
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pGrp=pM->GetMarkedSdrObj();
SdrObjList* pSrcLst=pGrp->GetSubList();
if (pSrcLst!=nullptr) {
nCount++;
if (nCount==1) {
aName = pGrp->TakeObjNameSingul(); // retrieve name of group
aName1 = pGrp->TakeObjNamePlural(); // retrieve name of group
bNameOk=true;
} else {
if (nCount==2) aName=aName1; // set plural name
if (bNameOk) {
OUString aStr(pGrp->TakeObjNamePlural()); // retrieve name of group
if (aStr != aName)
bNameOk = false;
}
}
size_t nDstCnt=pGrp->GetOrdNum();
SdrObjList* pDstLst=pM->GetPageView()->GetObjList();
// FIRST move contained objects to parent of group, so that
// the contained objects are NOT migrated to the UNDO-ItemPool
// when AddUndo(new SdrUndoDelObj(*pGrp)) is called.
const size_t nObjCount=pSrcLst->GetObjCount();
if( bUndo )
{
for (size_t no=nObjCount; no>0;)
{
no--;
SdrObject* pObj=pSrcLst->GetObj(no);
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoRemoveObject(*pObj));
}
}
for (size_t no=0; no<nObjCount; ++no)
{
SdrObject* pObj=pSrcLst->RemoveObject(0);
pDstLst->InsertObject(pObj,nDstCnt);
if( bUndo )
AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoInsertObject(*pObj,true));
nDstCnt++;
// No SortCheck when inserting into MarkList, because that would
// provoke a RecalcOrdNums() each time because of pObj->GetOrdNum():
aNewMark.InsertEntry(SdrMark(pObj,pM->GetPageView()),false);
}
if( bUndo )
{
// Now it is safe to add the delete-UNDO which triggers the
// MigrateItemPool now only for itself, not for the sub-objects.
// nDstCnt is right, because previous inserts move group
// object deeper and increase nDstCnt.
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pGrp));
}
pDstLst->RemoveObject(nDstCnt);
if( !bUndo )
SdrObject::Free(pGrp);
GetMarkedObjectListWriteAccess().DeleteMark(nm);
}
}
if (nCount!=0)
{
if (!bNameOk)
aName=SvxResId(STR_ObjNamePluralGRUP); // Use the term "Group Objects," if different objects are grouped.
SetUndoComment(SvxResId(STR_EditUngroup),aName);
}
if( bUndo )
EndUndo();
if (nCount!=0)
{
GetMarkedObjectListWriteAccess().Merge(aNewMark,true); // Because of the sorting above, aNewMark is reversed
MarkListHasChanged();
}
}
// ConvertToPoly
SdrObject* SdrEditView::ImpConvertOneObj(SdrObject* pObj, bool bPath, bool bLineToArea)
{
SdrObjectUniquePtr pNewObj = pObj->ConvertToPolyObj(bPath, bLineToArea);
if (pNewObj)
{
SdrObjList* pOL = pObj->getParentSdrObjListFromSdrObject();
const bool bUndo = IsUndoEnabled();
if( bUndo )
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoReplaceObject(*pObj,*pNewObj));
pOL->ReplaceObject(pNewObj.get(), pObj->GetOrdNum());
if( !bUndo )
SdrObject::Free(pObj);
}
return pNewObj.release();
}
void SdrEditView::ImpConvertTo(bool bPath, bool bLineToArea)
{
if (AreObjectsMarked()) {
bool bMrkChg = false;
const size_t nMarkCount=GetMarkedObjectCount();
const char* pDscrID = nullptr;
if(bLineToArea)
{
if(nMarkCount == 1)
pDscrID = STR_EditConvToContour;
else
pDscrID = STR_EditConvToContours;
BegUndo(SvxResId(pDscrID), GetDescriptionOfMarkedObjects());
}
else
{
if (bPath) {
if (nMarkCount==1) pDscrID=STR_EditConvToCurve;
else pDscrID=STR_EditConvToCurves;
BegUndo(SvxResId(pDscrID),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::ConvertToPath);
} else {
if (nMarkCount==1) pDscrID=STR_EditConvToPoly;
else pDscrID=STR_EditConvToPolys;
BegUndo(SvxResId(pDscrID),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::ConvertToPoly);
}
}
for (size_t nm=nMarkCount; nm>0;) {
--nm;
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pObj=pM->GetMarkedSdrObj();
SdrPageView* pPV=pM->GetPageView();
if (pObj->IsGroupObject() && !pObj->Is3DObj()) {
SdrObject* pGrp=pObj;
SdrObjListIter aIter(*pGrp, SdrIterMode::DeepNoGroups);
while (aIter.IsMore()) {
pObj=aIter.Next();
ImpConvertOneObj(pObj,bPath,bLineToArea);
}
} else {
SdrObject* pNewObj=ImpConvertOneObj(pObj,bPath,bLineToArea);
if (pNewObj!=nullptr) {
bMrkChg=true;
GetMarkedObjectListWriteAccess().ReplaceMark(SdrMark(pNewObj,pPV),nm);
}
}
}
EndUndo();
if (bMrkChg)
{
AdjustMarkHdl();
MarkListHasChanged();
}
}
}
void SdrEditView::ConvertMarkedToPathObj(bool bLineToArea)
{
ImpConvertTo(true, bLineToArea);
}
void SdrEditView::ConvertMarkedToPolyObj()
{
ImpConvertTo(false, false/*bLineToArea*/);
}
namespace
{
GDIMetaFile GetMetaFile(SdrGrafObj const * pGraf)
{
if (pGraf->HasGDIMetaFile())
return pGraf->GetTransformedGraphic(SdrGrafObjTransformsAttrs::MIRROR).GetGDIMetaFile();
assert(pGraf->isEmbeddedVectorGraphicData());
return pGraf->getMetafileFromEmbeddedVectorGraphicData();
}
}
// Metafile Import
void SdrEditView::DoImportMarkedMtf(SvdProgressInfo *pProgrInfo)
{
const bool bUndo = IsUndoEnabled();
if( bUndo )
BegUndo("", "", SdrRepeatFunc::ImportMtf);
SortMarkedObjects();
SdrMarkList aForTheDescription;
SdrMarkList aNewMarked;
for (size_t nm =GetMarkedObjectCount(); nm > 0; )
{
// create Undo objects for all new objects
// check for cancellation between the metafiles
if (pProgrInfo != nullptr)
{
pProgrInfo->SetNextObject();
if (!pProgrInfo->ReportActions(0))
break;
}
--nm;
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pObj=pM->GetMarkedSdrObj();
SdrPageView* pPV=pM->GetPageView();
SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
const size_t nInsPos=pObj->GetOrdNum()+1;
sal_uIntPtr nInsCnt=0;
tools::Rectangle aLogicRect;
SdrGrafObj* pGraf = dynamic_cast<SdrGrafObj*>( pObj );
if (pGraf != nullptr)
{
if (pGraf->HasGDIMetaFile() || pGraf->isEmbeddedVectorGraphicData())
{
GDIMetaFile aMetaFile(GetMetaFile(pGraf));
if (aMetaFile.GetActionSize())
{
aLogicRect = pGraf->GetLogicRect();
ImpSdrGDIMetaFileImport aFilter(*mpModel, pObj->GetLayer(), aLogicRect);
nInsCnt = aFilter.DoImport(aMetaFile, *pOL, nInsPos, pProgrInfo);
}
}
else if (pGraf->isEmbeddedPdfData())
{
#if HAVE_FEATURE_PDFIUM
aLogicRect = pGraf->GetLogicRect();
ImpSdrPdfImport aFilter(*mpModel, pObj->GetLayer(), aLogicRect, pGraf->getEmbeddedPdfData());
if (pGraf->getEmbeddedPageNumber() < aFilter.GetPageCount())
{
nInsCnt = aFilter.DoImport(*pOL, nInsPos, pGraf->getEmbeddedPageNumber(), pProgrInfo);
}
#endif // HAVE_FEATURE_PDFIUM
}
}
SdrOle2Obj* pOle2 = dynamic_cast<SdrOle2Obj*>(pObj);
if (pOle2 != nullptr && pOle2->GetGraphic())
{
aLogicRect = pOle2->GetLogicRect();
ImpSdrGDIMetaFileImport aFilter(*mpModel, pObj->GetLayer(), aLogicRect);
nInsCnt = aFilter.DoImport(pOle2->GetGraphic()->GetGDIMetaFile(), *pOL, nInsPos, pProgrInfo);
}
if (nInsCnt != 0)
{
// transformation
GeoStat aGeoStat(pGraf ? pGraf->GetGeoStat() : pOle2->GetGeoStat());
size_t nObj = nInsPos;
if (aGeoStat.nShearAngle)
aGeoStat.RecalcTan();
if (aGeoStat.nRotationAngle)
aGeoStat.RecalcSinCos();
for (sal_uIntPtr i = 0; i < nInsCnt; i++)
{
if (bUndo)
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pOL->GetObj(nObj)));
// update new MarkList
SdrObject* pCandidate = pOL->GetObj(nObj);
// apply original transformation
if (aGeoStat.nShearAngle)
pCandidate->NbcShear(aLogicRect.TopLeft(), aGeoStat.nShearAngle, aGeoStat.nTan, false);
if (aGeoStat.nRotationAngle)
pCandidate->NbcRotate(aLogicRect.TopLeft(), aGeoStat.nRotationAngle, aGeoStat.nSin, aGeoStat.nCos);
SdrMark aNewMark(pCandidate, pPV);
aNewMarked.InsertEntry(aNewMark);
nObj++;
}
aForTheDescription.InsertEntry(*pM);
if (bUndo)
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj));
// remove object from selection and delete
GetMarkedObjectListWriteAccess().DeleteMark(TryToFindMarkedObject(pObj));
pOL->RemoveObject(nInsPos-1);
if (!bUndo)
SdrObject::Free(pObj);
}
}
if (aNewMarked.GetMarkCount())
{
// create new selection
for (size_t a = 0; a < aNewMarked.GetMarkCount(); ++a)
{
GetMarkedObjectListWriteAccess().InsertEntry(*aNewMarked.GetMark(a));
}
SortMarkedObjects();
}
if (bUndo)
{
SetUndoComment(SvxResId(STR_EditImportMtf),aForTheDescription.GetMarkDescription());
EndUndo();
}
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */