/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include using namespace ::com::sun::star; using namespace ::com::sun::star::uno; using namespace ::com::sun::star::lang; using namespace ::com::sun::star::beans; using namespace ::com::sun::star::drawing; static void lcl_ShapeSegmentFromBinary( EnhancedCustomShapeSegment& rSegInfo, sal_uInt16 nSDat ) { switch( nSDat >> 8 ) { case 0x00 : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::LINETO; rSegInfo.Count = nSDat & 0xff; if ( !rSegInfo.Count ) rSegInfo.Count = 1; break; case 0x20 : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CURVETO; rSegInfo.Count = nSDat & 0xff; if ( !rSegInfo.Count ) rSegInfo.Count = 1; break; case 0x40 : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::MOVETO; rSegInfo.Count = nSDat & 0xff; if ( !rSegInfo.Count ) rSegInfo.Count = 1; break; case 0x60 : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CLOSESUBPATH; rSegInfo.Count = 0; break; case 0x80 : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ENDSUBPATH; rSegInfo.Count = 0; break; case 0xa1 : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ANGLEELLIPSETO; rSegInfo.Count = ( nSDat & 0xff ) / 3; break; case 0xa2 : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ANGLEELLIPSE; rSegInfo.Count = ( nSDat & 0xff ) / 3; break; case 0xa3 : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ARCTO; rSegInfo.Count = ( nSDat & 0xff ) >> 2; break; case 0xa4 : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ARC; rSegInfo.Count = ( nSDat & 0xff ) >> 2; break; case 0xa5 : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CLOCKWISEARCTO; rSegInfo.Count = ( nSDat & 0xff ) >> 2; break; case 0xa6 : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CLOCKWISEARC; rSegInfo.Count = ( nSDat & 0xff ) >> 2; break; case 0xa7 : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ELLIPTICALQUADRANTX; rSegInfo.Count = nSDat & 0xff; break; case 0xa8 : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ELLIPTICALQUADRANTY; rSegInfo.Count = nSDat & 0xff; break; case 0xaa : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::NOFILL; rSegInfo.Count = 0; break; case 0xab : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::NOSTROKE; rSegInfo.Count = 0; break; default: case 0xf8 : rSegInfo.Command = EnhancedCustomShapeSegmentCommand::UNKNOWN; rSegInfo.Count = nSDat; break; } } static MSO_SPT ImpGetCustomShapeType( const SdrObjCustomShape& rCustoShape ) { MSO_SPT eRetValue = mso_sptNil; OUString aEngine( rCustoShape.GetMergedItem( SDRATTR_CUSTOMSHAPE_ENGINE ).GetValue() ); if ( aEngine.isEmpty() || aEngine == "com.sun.star.drawing.EnhancedCustomShapeEngine" ) { OUString sShapeType; const SdrCustomShapeGeometryItem& rGeometryItem( rCustoShape.GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); const Any* pAny = rGeometryItem.GetPropertyValueByName( "Type" ); if ( pAny && ( *pAny >>= sShapeType ) ) eRetValue = EnhancedCustomShapeTypeNames::Get( sShapeType ); } return eRetValue; }; static bool ImpVerticalSwitch( const SdrObjCustomShape& rCustoShape ) { bool bRet = false; MSO_SPT eShapeType( ImpGetCustomShapeType( rCustoShape ) ); switch( eShapeType ) { case mso_sptAccentBorderCallout90 : // 2 ortho case mso_sptBorderCallout1 : // 2 diag case mso_sptBorderCallout2 : // 3 { bRet = true; } break; default: break; } return bRet; } // #i37011# create a clone with all attributes changed to shadow attributes // and translation executed, too. SdrObject* ImpCreateShadowObjectClone(const SdrObject& rOriginal, const SfxItemSet& rOriginalSet) { SdrObject* pRetval = nullptr; const bool bShadow(rOriginalSet.Get(SDRATTR_SHADOW).GetValue()); if(bShadow) { // create a shadow representing object const sal_Int32 nXDist(rOriginalSet.Get(SDRATTR_SHADOWXDIST).GetValue()); const sal_Int32 nYDist(rOriginalSet.Get(SDRATTR_SHADOWYDIST).GetValue()); const ::Color aShadowColor(rOriginalSet.Get(SDRATTR_SHADOWCOLOR).GetColorValue()); const sal_uInt16 nShadowTransparence(rOriginalSet.Get(SDRATTR_SHADOWTRANSPARENCE).GetValue()); pRetval = rOriginal.CloneSdrObject(rOriginal.getSdrModelFromSdrObject()); DBG_ASSERT(pRetval, "ImpCreateShadowObjectClone: Could not clone object (!)"); // look for used stuff SdrObjListIter aIterator(rOriginal); bool bLineUsed(false); bool bAllFillUsed(false); bool bSolidFillUsed(false); bool bGradientFillUsed(false); bool bHatchFillUsed(false); bool bBitmapFillUsed(false); while(aIterator.IsMore()) { SdrObject* pObj = aIterator.Next(); drawing::FillStyle eFillStyle = pObj->GetMergedItem(XATTR_FILLSTYLE).GetValue(); if(!bLineUsed) { drawing::LineStyle eLineStyle = pObj->GetMergedItem(XATTR_LINESTYLE).GetValue(); if(drawing::LineStyle_NONE != eLineStyle) { bLineUsed = true; } } if(!bAllFillUsed) { if(!bSolidFillUsed && drawing::FillStyle_SOLID == eFillStyle) { bSolidFillUsed = true; bAllFillUsed = (bSolidFillUsed && bGradientFillUsed && bHatchFillUsed && bBitmapFillUsed); } if(!bGradientFillUsed && drawing::FillStyle_GRADIENT == eFillStyle) { bGradientFillUsed = true; bAllFillUsed = (bSolidFillUsed && bGradientFillUsed && bHatchFillUsed && bBitmapFillUsed); } if(!bHatchFillUsed && drawing::FillStyle_HATCH == eFillStyle) { bHatchFillUsed = true; bAllFillUsed = (bSolidFillUsed && bGradientFillUsed && bHatchFillUsed && bBitmapFillUsed); } if(!bBitmapFillUsed && drawing::FillStyle_BITMAP == eFillStyle) { bBitmapFillUsed = true; bAllFillUsed = (bSolidFillUsed && bGradientFillUsed && bHatchFillUsed && bBitmapFillUsed); } } } // translate to shadow coordinates pRetval->NbcMove(Size(nXDist, nYDist)); // set items as needed SfxItemSet aTempSet(rOriginalSet); // if a SvxWritingModeItem (Top->Bottom) is set the text object // is creating a paraobject, but paraobjects can not be created without model. So // we are preventing the crash by setting the writing mode always left to right, // this is not bad since our shadow geometry does not contain text. aTempSet.Put( SvxWritingModeItem( css::text::WritingMode_LR_TB, SDRATTR_TEXTDIRECTION ) ); // no shadow aTempSet.Put(makeSdrShadowItem(false)); aTempSet.Put(makeSdrShadowXDistItem(0)); aTempSet.Put(makeSdrShadowYDistItem(0)); // line color and transparency like shadow if(bLineUsed) { aTempSet.Put(XLineColorItem(OUString(), aShadowColor)); aTempSet.Put(XLineTransparenceItem(nShadowTransparence)); } // fill color and transparency like shadow if(bSolidFillUsed) { aTempSet.Put(XFillColorItem(OUString(), aShadowColor)); aTempSet.Put(XFillTransparenceItem(nShadowTransparence)); } // gradient and transparency like shadow if(bGradientFillUsed) { XGradient aGradient(rOriginalSet.Get(XATTR_FILLGRADIENT).GetGradientValue()); sal_uInt8 nStartLuminance(aGradient.GetStartColor().GetLuminance()); sal_uInt8 nEndLuminance(aGradient.GetEndColor().GetLuminance()); if(aGradient.GetStartIntens() != 100) { nStartLuminance = static_cast(nStartLuminance * (static_cast(aGradient.GetStartIntens()) / 100.0)); } if(aGradient.GetEndIntens() != 100) { nEndLuminance = static_cast(nEndLuminance * (static_cast(aGradient.GetEndIntens()) / 100.0)); } ::Color aStartColor( static_cast((nStartLuminance * aShadowColor.GetRed()) / 256), static_cast((nStartLuminance * aShadowColor.GetGreen()) / 256), static_cast((nStartLuminance * aShadowColor.GetBlue()) / 256)); ::Color aEndColor( static_cast((nEndLuminance * aShadowColor.GetRed()) / 256), static_cast((nEndLuminance * aShadowColor.GetGreen()) / 256), static_cast((nEndLuminance * aShadowColor.GetBlue()) / 256)); aGradient.SetStartColor(aStartColor); aGradient.SetEndColor(aEndColor); aTempSet.Put(XFillGradientItem(aGradient)); aTempSet.Put(XFillTransparenceItem(nShadowTransparence)); } // hatch and transparency like shadow if(bHatchFillUsed) { XHatch aHatch(rOriginalSet.Get(XATTR_FILLHATCH).GetHatchValue()); aHatch.SetColor(aShadowColor); aTempSet.Put(XFillHatchItem(aHatch)); aTempSet.Put(XFillTransparenceItem(nShadowTransparence)); } // bitmap and transparency like shadow if(bBitmapFillUsed) { GraphicObject aGraphicObject(rOriginalSet.Get(XATTR_FILLBITMAP).GetGraphicObject()); const BitmapEx aBitmapEx(aGraphicObject.GetGraphic().GetBitmapEx()); Bitmap aBitmap(aBitmapEx.GetBitmap()); if(!aBitmap.IsEmpty()) { Bitmap::ScopedReadAccess pReadAccess(aBitmap); if(pReadAccess) { ScopedVclPtr pVirDev(VclPtr::Create()); pVirDev->SetOutputSizePixel(aBitmap.GetSizePixel()); for(long y(0); y < pReadAccess->Height(); y++) { for(long x(0); x < pReadAccess->Width(); x++) { sal_uInt16 nLuminance(static_cast(pReadAccess->GetLuminance(y, x)) + 1); const Color aDestColor( static_cast((nLuminance * static_cast(aShadowColor.GetRed())) >> 8), static_cast((nLuminance * static_cast(aShadowColor.GetGreen())) >> 8), static_cast((nLuminance * static_cast(aShadowColor.GetBlue())) >> 8)); pVirDev->DrawPixel(Point(x,y), aDestColor); } } pReadAccess.reset(); aGraphicObject.SetGraphic(Graphic(pVirDev->GetBitmapEx(Point(0,0), aBitmap.GetSizePixel()))); } } aTempSet.Put(XFillBitmapItem(aGraphicObject)); aTempSet.Put(XFillTransparenceItem(nShadowTransparence)); } // set attributes and paint shadow object pRetval->SetMergedItemSet( aTempSet ); } return pRetval; } Reference< XCustomShapeEngine > const & SdrObjCustomShape::GetCustomShapeEngine() const { if (mxCustomShapeEngine.is()) return mxCustomShapeEngine; OUString aEngine(GetMergedItem( SDRATTR_CUSTOMSHAPE_ENGINE ).GetValue()); if ( aEngine.isEmpty() ) aEngine = "com.sun.star.drawing.EnhancedCustomShapeEngine"; Reference< XComponentContext > xContext( ::comphelper::getProcessComponentContext() ); Reference< XShape > aXShape = GetXShapeForSdrObject(const_cast(this)); if ( aXShape.is() ) { Sequence< Any > aArgument( 1 ); Sequence< PropertyValue > aPropValues( 1 ); aPropValues[ 0 ].Name = "CustomShape"; aPropValues[ 0 ].Value <<= aXShape; aArgument[ 0 ] <<= aPropValues; try { Reference xInterface(xContext->getServiceManager()->createInstanceWithArgumentsAndContext(aEngine, aArgument, xContext)); if (xInterface.is()) mxCustomShapeEngine.set( xInterface, UNO_QUERY ); } catch (const css::loader::CannotActivateFactoryException&) { } } return mxCustomShapeEngine; } const SdrObject* SdrObjCustomShape::GetSdrObjectFromCustomShape() const { if ( !mXRenderedCustomShape.is() ) { Reference< XCustomShapeEngine > xCustomShapeEngine( GetCustomShapeEngine() ); if ( xCustomShapeEngine.is() ) const_cast(this)->mXRenderedCustomShape = xCustomShapeEngine->render(); } SdrObject* pRenderedCustomShape = mXRenderedCustomShape.is() ? GetSdrObjectFromXShape( mXRenderedCustomShape ) : nullptr; return pRenderedCustomShape; } // #i37011# Shadow geometry creation const SdrObject* SdrObjCustomShape::GetSdrObjectShadowFromCustomShape() const { if(!mpLastShadowGeometry) { const SdrObject* pSdrObject = GetSdrObjectFromCustomShape(); if(pSdrObject) { const SfxItemSet& rOriginalSet = GetObjectItemSet(); const bool bShadow(rOriginalSet.Get( SDRATTR_SHADOW ).GetValue()); if(bShadow) { // create a clone with all attributes changed to shadow attributes // and translation executed, too. const_cast(this)->mpLastShadowGeometry = ImpCreateShadowObjectClone(*pSdrObject, rOriginalSet); } } } return mpLastShadowGeometry; } bool SdrObjCustomShape::IsTextPath() const { const OUString sTextPath( "TextPath" ); bool bTextPathOn = false; const SdrCustomShapeGeometryItem& rGeometryItem = GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ); const Any* pAny = rGeometryItem.GetPropertyValueByName( sTextPath, sTextPath ); if ( pAny ) *pAny >>= bTextPathOn; return bTextPathOn; } bool SdrObjCustomShape::UseNoFillStyle() const { bool bRet = false; OUString sShapeType; const OUString sType( "Type" ); const SdrCustomShapeGeometryItem& rGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); const Any* pAny = rGeometryItem.GetPropertyValueByName( sType ); if ( pAny ) *pAny >>= sShapeType; bRet = !IsCustomShapeFilledByDefault( EnhancedCustomShapeTypeNames::Get( sType ) ); return bRet; } bool SdrObjCustomShape::IsMirroredX() const { bool bMirroredX = false; SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); const OUString sMirroredX( "MirroredX" ); css::uno::Any* pAny = aGeometryItem.GetPropertyValueByName( sMirroredX ); if ( pAny ) *pAny >>= bMirroredX; return bMirroredX; } bool SdrObjCustomShape::IsMirroredY() const { bool bMirroredY = false; SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); const OUString sMirroredY( "MirroredY" ); css::uno::Any* pAny = aGeometryItem.GetPropertyValueByName( sMirroredY ); if ( pAny ) *pAny >>= bMirroredY; return bMirroredY; } void SdrObjCustomShape::SetMirroredX( const bool bMirrorX ) { SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); const OUString sMirroredX( "MirroredX" ); PropertyValue aPropVal; aPropVal.Name = sMirroredX; aPropVal.Value <<= bMirrorX; aGeometryItem.SetPropertyValue( aPropVal ); SetMergedItem( aGeometryItem ); } void SdrObjCustomShape::SetMirroredY( const bool bMirrorY ) { SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); const OUString sMirroredY( "MirroredY" ); PropertyValue aPropVal; aPropVal.Name = sMirroredY; aPropVal.Value <<= bMirrorY; aGeometryItem.SetPropertyValue( aPropVal ); SetMergedItem( aGeometryItem ); } double SdrObjCustomShape::GetExtraTextRotation( const bool bPreRotation ) const { const css::uno::Any* pAny; const SdrCustomShapeGeometryItem& rGeometryItem = GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ); const OUString sTextRotateAngle( "TextRotateAngle" ); const OUString sTextPreRotateAngle( "TextPreRotateAngle" ); pAny = rGeometryItem.GetPropertyValueByName( bPreRotation ? sTextPreRotateAngle : sTextRotateAngle ); double fExtraTextRotateAngle = 0.0; if ( pAny ) *pAny >>= fExtraTextRotateAngle; return fExtraTextRotateAngle; } bool SdrObjCustomShape::GetTextBounds( tools::Rectangle& rTextBound ) const { bool bRet = false; Reference< XCustomShapeEngine > xCustomShapeEngine( GetCustomShapeEngine() ); if ( xCustomShapeEngine.is() ) { awt::Rectangle aR( xCustomShapeEngine->getTextBounds() ); if ( aR.Width > 1 && aR.Height > 1 ) { rTextBound = tools::Rectangle( Point( aR.X, aR.Y ), Size( aR.Width, aR.Height ) ); bRet = true; } } return bRet; } basegfx::B2DPolyPolygon SdrObjCustomShape::GetLineGeometry( const bool bBezierAllowed ) const { basegfx::B2DPolyPolygon aRetval; Reference< XCustomShapeEngine > xCustomShapeEngine( GetCustomShapeEngine() ); if ( xCustomShapeEngine.is() ) { css::drawing::PolyPolygonBezierCoords aBezierCoords = xCustomShapeEngine->getLineGeometry(); try { aRetval = basegfx::utils::UnoPolyPolygonBezierCoordsToB2DPolyPolygon( aBezierCoords ); if ( !bBezierAllowed && aRetval.areControlPointsUsed()) { aRetval = basegfx::utils::adaptiveSubdivideByAngle(aRetval); } } catch ( const css::lang::IllegalArgumentException & ) { } } return aRetval; } std::vector< SdrCustomShapeInteraction > SdrObjCustomShape::GetInteractionHandles() const { std::vector< SdrCustomShapeInteraction > aRet; try { Reference< XCustomShapeEngine > xCustomShapeEngine( GetCustomShapeEngine() ); if ( xCustomShapeEngine.is() ) { int i; Sequence< Reference< XCustomShapeHandle > > xInteractionHandles( xCustomShapeEngine->getInteraction() ); for ( i = 0; i < xInteractionHandles.getLength(); i++ ) { if ( xInteractionHandles[ i ].is() ) { SdrCustomShapeInteraction aSdrCustomShapeInteraction; aSdrCustomShapeInteraction.xInteraction = xInteractionHandles[ i ]; aSdrCustomShapeInteraction.aPosition = xInteractionHandles[ i ]->getPosition(); CustomShapeHandleModes nMode = CustomShapeHandleModes::NONE; switch( ImpGetCustomShapeType( *this ) ) { case mso_sptAccentBorderCallout90 : // 2 ortho { if (i == 0) nMode |= CustomShapeHandleModes::RESIZE_FIXED | CustomShapeHandleModes::CREATE_FIXED; else if (i == 1) nMode |= CustomShapeHandleModes::RESIZE_ABSOLUTE_X | CustomShapeHandleModes::RESIZE_ABSOLUTE_Y | CustomShapeHandleModes::MOVE_SHAPE | CustomShapeHandleModes::ORTHO4; } break; case mso_sptChevron : case mso_sptHomePlate : nMode |= CustomShapeHandleModes::RESIZE_ABSOLUTE_NEGX; break; case mso_sptWedgeRectCallout : case mso_sptWedgeRRectCallout : case mso_sptCloudCallout : case mso_sptWedgeEllipseCallout : { if (i == 0) nMode |= CustomShapeHandleModes::RESIZE_FIXED; } break; case mso_sptBorderCallout1 : // 2 diag { if (i == 0) nMode |= CustomShapeHandleModes::RESIZE_FIXED | CustomShapeHandleModes::CREATE_FIXED; else if (i == 1) nMode |= CustomShapeHandleModes::RESIZE_ABSOLUTE_X | CustomShapeHandleModes::RESIZE_ABSOLUTE_Y | CustomShapeHandleModes::MOVE_SHAPE; } break; case mso_sptBorderCallout2 : // 3 { if (i == 0) nMode |= CustomShapeHandleModes::RESIZE_FIXED | CustomShapeHandleModes::CREATE_FIXED; else if (i == 2) nMode |= CustomShapeHandleModes::RESIZE_ABSOLUTE_X | CustomShapeHandleModes::RESIZE_ABSOLUTE_Y | CustomShapeHandleModes::MOVE_SHAPE; } break; case mso_sptCallout90 : case mso_sptAccentCallout90 : case mso_sptBorderCallout90 : case mso_sptCallout1 : case mso_sptCallout2 : case mso_sptCallout3 : case mso_sptAccentCallout1 : case mso_sptAccentCallout2 : case mso_sptAccentCallout3 : case mso_sptBorderCallout3 : case mso_sptAccentBorderCallout1 : case mso_sptAccentBorderCallout2 : case mso_sptAccentBorderCallout3 : { if (i == 0) nMode |= CustomShapeHandleModes::RESIZE_FIXED | CustomShapeHandleModes::CREATE_FIXED; } break; default: break; } aSdrCustomShapeInteraction.nMode = nMode; aRet.push_back( aSdrCustomShapeInteraction ); } } } } catch( const uno::RuntimeException& ) { } return aRet; } // BaseProperties section #define DEFAULT_MINIMUM_SIGNED_COMPARE (sal_Int32(0x80000000)) #define DEFAULT_MAXIMUM_SIGNED_COMPARE (sal_Int32(0x7fffffff)) static sal_Int32 GetNumberOfProperties ( const SvxMSDffHandle* pData ) { sal_Int32 nPropertiesNeeded=1; // position is always needed SvxMSDffHandleFlags nFlags = pData->nFlags; if ( nFlags & SvxMSDffHandleFlags::MIRRORED_X ) nPropertiesNeeded++; if ( nFlags & SvxMSDffHandleFlags::MIRRORED_Y ) nPropertiesNeeded++; if ( nFlags & SvxMSDffHandleFlags::SWITCHED ) nPropertiesNeeded++; if ( nFlags & SvxMSDffHandleFlags::POLAR ) { nPropertiesNeeded++; if ( nFlags & SvxMSDffHandleFlags::RADIUS_RANGE ) { if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; } } else if ( nFlags & SvxMSDffHandleFlags::RANGE ) { if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; if ( pData->nRangeYMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; if ( pData->nRangeYMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; } return nPropertiesNeeded; } static void lcl_ShapePropertiesFromDFF( const SvxMSDffHandle* pData, css::beans::PropertyValues& rPropValues ) { SvxMSDffHandleFlags nFlags = pData->nFlags; sal_Int32 n=0; // POSITION { css::drawing::EnhancedCustomShapeParameterPair aPosition; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aPosition.First, pData->nPositionX, true, true ); EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aPosition.Second, pData->nPositionY, true, false ); rPropValues[ n ].Name = "Position"; rPropValues[ n++ ].Value <<= aPosition; } if ( nFlags & SvxMSDffHandleFlags::MIRRORED_X ) { rPropValues[ n ].Name = "MirroredX"; rPropValues[ n++ ].Value <<= true; } if ( nFlags & SvxMSDffHandleFlags::MIRRORED_Y ) { rPropValues[ n ].Name = "MirroredY"; rPropValues[ n++ ].Value <<= true; } if ( nFlags & SvxMSDffHandleFlags::SWITCHED ) { rPropValues[ n ].Name = "Switched"; rPropValues[ n++ ].Value <<= true; } if ( nFlags & SvxMSDffHandleFlags::POLAR ) { css::drawing::EnhancedCustomShapeParameterPair aCenter; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aCenter.First, pData->nCenterX, bool( nFlags & SvxMSDffHandleFlags::CENTER_X_IS_SPECIAL ), true ); EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aCenter.Second, pData->nCenterY, bool( nFlags & SvxMSDffHandleFlags::CENTER_Y_IS_SPECIAL ), false ); rPropValues[ n ].Name = "Polar"; rPropValues[ n++ ].Value <<= aCenter; if ( nFlags & SvxMSDffHandleFlags::RADIUS_RANGE ) { if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) { css::drawing::EnhancedCustomShapeParameter aRadiusRangeMinimum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRadiusRangeMinimum, pData->nRangeXMin, bool( nFlags & SvxMSDffHandleFlags::RANGE_X_MIN_IS_SPECIAL ), true ); rPropValues[ n ].Name = "RadiusRangeMinimum"; rPropValues[ n++ ].Value <<= aRadiusRangeMinimum; } if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) { css::drawing::EnhancedCustomShapeParameter aRadiusRangeMaximum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRadiusRangeMaximum, pData->nRangeXMax, bool( nFlags & SvxMSDffHandleFlags::RANGE_X_MAX_IS_SPECIAL ), false ); rPropValues[ n ].Name = "RadiusRangeMaximum"; rPropValues[ n++ ].Value <<= aRadiusRangeMaximum; } } } else if ( nFlags & SvxMSDffHandleFlags::RANGE ) { if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) { css::drawing::EnhancedCustomShapeParameter aRangeXMinimum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeXMinimum, pData->nRangeXMin, bool( nFlags & SvxMSDffHandleFlags::RANGE_X_MIN_IS_SPECIAL ), true ); rPropValues[ n ].Name = "RangeXMinimum"; rPropValues[ n++ ].Value <<= aRangeXMinimum; } if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) { css::drawing::EnhancedCustomShapeParameter aRangeXMaximum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeXMaximum, pData->nRangeXMax, bool( nFlags & SvxMSDffHandleFlags::RANGE_X_MAX_IS_SPECIAL ), false ); rPropValues[ n ].Name = "RangeXMaximum"; rPropValues[ n++ ].Value <<= aRangeXMaximum; } if ( pData->nRangeYMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) { css::drawing::EnhancedCustomShapeParameter aRangeYMinimum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeYMinimum, pData->nRangeYMin, bool( nFlags & SvxMSDffHandleFlags::RANGE_Y_MIN_IS_SPECIAL ), true ); rPropValues[ n ].Name = "RangeYMinimum"; rPropValues[ n++ ].Value <<= aRangeYMinimum; } if ( pData->nRangeYMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) { css::drawing::EnhancedCustomShapeParameter aRangeYMaximum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeYMaximum, pData->nRangeYMax, bool( nFlags & SvxMSDffHandleFlags::RANGE_Y_MAX_IS_SPECIAL ), false ); rPropValues[ n ].Name = "RangeYMaximum"; rPropValues[ n++ ].Value <<= aRangeYMaximum; } } } std::unique_ptr SdrObjCustomShape::CreateObjectSpecificProperties() { return o3tl::make_unique(*this); } SdrObjCustomShape::SdrObjCustomShape(SdrModel& rSdrModel) : SdrTextObj(rSdrModel) , fObjectRotation(0.0) , mbAdjustingTextFrameWidthAndHeight(false) , mpLastShadowGeometry(nullptr) { bClosedObj = true; // custom shapes may be filled bTextFrame = true; } SdrObjCustomShape::~SdrObjCustomShape() { // delete buffered display geometry InvalidateRenderGeometry(); } void SdrObjCustomShape::MergeDefaultAttributes( const OUString* pType ) { PropertyValue aPropVal; OUString sShapeType; const OUString sType( "Type" ); SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); if ( pType && !pType->isEmpty() ) { sal_Int32 nType = pType->toInt32(); if ( nType ) sShapeType = EnhancedCustomShapeTypeNames::Get( static_cast< MSO_SPT >( nType ) ); else sShapeType = *pType; aPropVal.Name = sType; aPropVal.Value <<= sShapeType; aGeometryItem.SetPropertyValue( aPropVal ); } else { Any *pAny = aGeometryItem.GetPropertyValueByName( sType ); if ( pAny ) *pAny >>= sShapeType; } MSO_SPT eSpType = EnhancedCustomShapeTypeNames::Get( sShapeType ); const sal_Int32* pDefData = nullptr; const mso_CustomShape* pDefCustomShape = GetCustomShapeContent( eSpType ); if ( pDefCustomShape ) pDefData = pDefCustomShape->pDefData; css::uno::Sequence< css::drawing::EnhancedCustomShapeAdjustmentValue > seqAdjustmentValues; // AdjustmentValues const OUString sAdjustmentValues( "AdjustmentValues" ); const Any* pAny = aGeometryItem.GetPropertyValueByName( sAdjustmentValues ); if ( pAny ) *pAny >>= seqAdjustmentValues; if ( pDefCustomShape && pDefData ) // now check if we have to default some adjustment values { // first check if there are adjustment values are to be appended sal_Int32 i, nAdjustmentValues = seqAdjustmentValues.getLength(); sal_Int32 nAdjustmentDefaults = *pDefData++; if ( nAdjustmentDefaults > nAdjustmentValues ) { seqAdjustmentValues.realloc( nAdjustmentDefaults ); for ( i = nAdjustmentValues; i < nAdjustmentDefaults; i++ ) { seqAdjustmentValues[ i ].Value <<= pDefData[ i ]; seqAdjustmentValues[ i ].State = css::beans::PropertyState_DIRECT_VALUE; } } // check if there are defaulted adjustment values that should be filled the hard coded defaults (pDefValue) sal_Int32 nCount = std::min(nAdjustmentValues, nAdjustmentDefaults); for ( i = 0; i < nCount; i++ ) { if ( seqAdjustmentValues[ i ].State != css::beans::PropertyState_DIRECT_VALUE ) { seqAdjustmentValues[ i ].Value <<= pDefData[ i ]; seqAdjustmentValues[ i ].State = css::beans::PropertyState_DIRECT_VALUE; } } } aPropVal.Name = sAdjustmentValues; aPropVal.Value <<= seqAdjustmentValues; aGeometryItem.SetPropertyValue( aPropVal ); // Coordsize const OUString sViewBox( "ViewBox" ); const Any* pViewBox = aGeometryItem.GetPropertyValueByName( sViewBox ); css::awt::Rectangle aViewBox; if ( !pViewBox || !(*pViewBox >>= aViewBox ) ) { if ( pDefCustomShape ) { aViewBox.X = 0; aViewBox.Y = 0; aViewBox.Width = pDefCustomShape->nCoordWidth; aViewBox.Height= pDefCustomShape->nCoordHeight; aPropVal.Name = sViewBox; aPropVal.Value <<= aViewBox; aGeometryItem.SetPropertyValue( aPropVal ); } } const OUString sPath( "Path" ); // Path/Coordinates const OUString sCoordinates( "Coordinates" ); pAny = aGeometryItem.GetPropertyValueByName( sPath, sCoordinates ); if ( !pAny && pDefCustomShape && pDefCustomShape->nVertices && pDefCustomShape->pVertices ) { css::uno::Sequence< css::drawing::EnhancedCustomShapeParameterPair> seqCoordinates; sal_Int32 i, nCount = pDefCustomShape->nVertices; seqCoordinates.realloc( nCount ); for ( i = 0; i < nCount; i++ ) { EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqCoordinates[ i ].First, pDefCustomShape->pVertices[ i ].nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqCoordinates[ i ].Second, pDefCustomShape->pVertices[ i ].nValB ); } aPropVal.Name = sCoordinates; aPropVal.Value <<= seqCoordinates; aGeometryItem.SetPropertyValue( sPath, aPropVal ); } // Path/GluePoints const OUString sGluePoints( "GluePoints" ); pAny = aGeometryItem.GetPropertyValueByName( sPath, sGluePoints ); if ( !pAny && pDefCustomShape && pDefCustomShape->nGluePoints && pDefCustomShape->pGluePoints ) { css::uno::Sequence< css::drawing::EnhancedCustomShapeParameterPair> seqGluePoints; sal_Int32 i, nCount = pDefCustomShape->nGluePoints; seqGluePoints.realloc( nCount ); for ( i = 0; i < nCount; i++ ) { EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqGluePoints[ i ].First, pDefCustomShape->pGluePoints[ i ].nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqGluePoints[ i ].Second, pDefCustomShape->pGluePoints[ i ].nValB ); } aPropVal.Name = sGluePoints; aPropVal.Value <<= seqGluePoints; aGeometryItem.SetPropertyValue( sPath, aPropVal ); } // Path/Segments const OUString sSegments( "Segments" ); pAny = aGeometryItem.GetPropertyValueByName( sPath, sSegments ); if ( !pAny && pDefCustomShape && pDefCustomShape->nElements && pDefCustomShape->pElements ) { css::uno::Sequence< css::drawing::EnhancedCustomShapeSegment > seqSegments; sal_Int32 i, nCount = pDefCustomShape->nElements; seqSegments.realloc( nCount ); for ( i = 0; i < nCount; i++ ) { EnhancedCustomShapeSegment& rSegInfo = seqSegments[ i ]; sal_uInt16 nSDat = pDefCustomShape->pElements[ i ]; lcl_ShapeSegmentFromBinary( rSegInfo, nSDat ); } aPropVal.Name = sSegments; aPropVal.Value <<= seqSegments; aGeometryItem.SetPropertyValue( sPath, aPropVal ); } // Path/StretchX const OUString sStretchX( "StretchX" ); pAny = aGeometryItem.GetPropertyValueByName( sPath, sStretchX ); if ( !pAny && pDefCustomShape ) { sal_Int32 nXRef = pDefCustomShape->nXRef; if ( nXRef != DEFAULT_MINIMUM_SIGNED_COMPARE ) { aPropVal.Name = sStretchX; aPropVal.Value <<= nXRef; aGeometryItem.SetPropertyValue( sPath, aPropVal ); } } // Path/StretchY const OUString sStretchY( "StretchY" ); pAny = aGeometryItem.GetPropertyValueByName( sPath, sStretchY ); if ( !pAny && pDefCustomShape ) { sal_Int32 nYRef = pDefCustomShape->nYRef; if ( nYRef != DEFAULT_MINIMUM_SIGNED_COMPARE ) { aPropVal.Name = sStretchY; aPropVal.Value <<= nYRef; aGeometryItem.SetPropertyValue( sPath, aPropVal ); } } // Path/TextFrames const OUString sTextFrames( "TextFrames" ); pAny = aGeometryItem.GetPropertyValueByName( sPath, sTextFrames ); if ( !pAny && pDefCustomShape && pDefCustomShape->nTextRect && pDefCustomShape->pTextRect ) { css::uno::Sequence< css::drawing::EnhancedCustomShapeTextFrame > seqTextFrames; sal_Int32 i, nCount = pDefCustomShape->nTextRect; seqTextFrames.realloc( nCount ); const SvxMSDffTextRectangles* pRectangles = pDefCustomShape->pTextRect; for ( i = 0; i < nCount; i++, pRectangles++ ) { EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames[ i ].TopLeft.First, pRectangles->nPairA.nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames[ i ].TopLeft.Second, pRectangles->nPairA.nValB ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames[ i ].BottomRight.First, pRectangles->nPairB.nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames[ i ].BottomRight.Second, pRectangles->nPairB.nValB ); } aPropVal.Name = sTextFrames; aPropVal.Value <<= seqTextFrames; aGeometryItem.SetPropertyValue( sPath, aPropVal ); } // Equations const OUString sEquations( "Equations" ); pAny = aGeometryItem.GetPropertyValueByName( sEquations ); if ( !pAny && pDefCustomShape && pDefCustomShape->nCalculation && pDefCustomShape->pCalculation ) { css::uno::Sequence< OUString > seqEquations; sal_Int32 i, nCount = pDefCustomShape->nCalculation; seqEquations.realloc( nCount ); const SvxMSDffCalculationData* pData = pDefCustomShape->pCalculation; for ( i = 0; i < nCount; i++, pData++ ) seqEquations[ i ] = EnhancedCustomShape2d::GetEquation( pData->nFlags, pData->nVal[ 0 ], pData->nVal[ 1 ], pData->nVal[ 2 ] ); aPropVal.Name = sEquations; aPropVal.Value <<= seqEquations; aGeometryItem.SetPropertyValue( aPropVal ); } // Handles const OUString sHandles( "Handles" ); pAny = aGeometryItem.GetPropertyValueByName( sHandles ); if ( !pAny && pDefCustomShape && pDefCustomShape->nHandles && pDefCustomShape->pHandles ) { css::uno::Sequence< css::beans::PropertyValues > seqHandles; sal_Int32 i, nCount = pDefCustomShape->nHandles; const SvxMSDffHandle* pData = pDefCustomShape->pHandles; seqHandles.realloc( nCount ); for ( i = 0; i < nCount; i++, pData++ ) { sal_Int32 nPropertiesNeeded; css::beans::PropertyValues& rPropValues = seqHandles[ i ]; nPropertiesNeeded = GetNumberOfProperties( pData ); rPropValues.realloc( nPropertiesNeeded ); lcl_ShapePropertiesFromDFF( pData, rPropValues ); } aPropVal.Name = sHandles; aPropVal.Value <<= seqHandles; aGeometryItem.SetPropertyValue( aPropVal ); } SetMergedItem( aGeometryItem ); } bool SdrObjCustomShape::IsDefaultGeometry( const DefaultType eDefaultType ) const { bool bIsDefaultGeometry = false; PropertyValue aPropVal; OUString sShapeType; const OUString sType( "Type" ); const SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); const Any *pAny = aGeometryItem.GetPropertyValueByName( sType ); if ( pAny ) *pAny >>= sShapeType; MSO_SPT eSpType = EnhancedCustomShapeTypeNames::Get( sShapeType ); const mso_CustomShape* pDefCustomShape = GetCustomShapeContent( eSpType ); const OUString sPath( "Path" ); switch( eDefaultType ) { case DefaultType::Viewbox : { const OUString sViewBox( "ViewBox" ); const Any* pViewBox = const_cast(aGeometryItem).GetPropertyValueByName( sViewBox ); css::awt::Rectangle aViewBox; if ( pViewBox && ( *pViewBox >>= aViewBox ) ) { if ( ( aViewBox.Width == pDefCustomShape->nCoordWidth ) && ( aViewBox.Height == pDefCustomShape->nCoordHeight ) ) bIsDefaultGeometry = true; } } break; case DefaultType::Path : { const OUString sCoordinates( "Coordinates" ); pAny = const_cast(aGeometryItem).GetPropertyValueByName( sPath, sCoordinates ); if ( pAny && pDefCustomShape && pDefCustomShape->nVertices && pDefCustomShape->pVertices ) { css::uno::Sequence< css::drawing::EnhancedCustomShapeParameterPair> seqCoordinates1, seqCoordinates2; if ( *pAny >>= seqCoordinates1 ) { sal_Int32 i, nCount = pDefCustomShape->nVertices; seqCoordinates2.realloc( nCount ); for ( i = 0; i < nCount; i++ ) { EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqCoordinates2[ i ].First, pDefCustomShape->pVertices[ i ].nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqCoordinates2[ i ].Second, pDefCustomShape->pVertices[ i ].nValB ); } if ( seqCoordinates1 == seqCoordinates2 ) bIsDefaultGeometry = true; } } else if ( pDefCustomShape && ( ( pDefCustomShape->nVertices == 0 ) || ( pDefCustomShape->pVertices == nullptr ) ) ) bIsDefaultGeometry = true; } break; case DefaultType::Gluepoints : { const OUString sGluePoints( "GluePoints" ); pAny = const_cast(aGeometryItem).GetPropertyValueByName( sPath, sGluePoints ); if ( pAny && pDefCustomShape && pDefCustomShape->nGluePoints && pDefCustomShape->pGluePoints ) { css::uno::Sequence< css::drawing::EnhancedCustomShapeParameterPair> seqGluePoints1, seqGluePoints2; if ( *pAny >>= seqGluePoints1 ) { sal_Int32 i, nCount = pDefCustomShape->nGluePoints; seqGluePoints2.realloc( nCount ); for ( i = 0; i < nCount; i++ ) { EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqGluePoints2[ i ].First, pDefCustomShape->pGluePoints[ i ].nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqGluePoints2[ i ].Second, pDefCustomShape->pGluePoints[ i ].nValB ); } if ( seqGluePoints1 == seqGluePoints2 ) bIsDefaultGeometry = true; } } else if ( pDefCustomShape && ( pDefCustomShape->nGluePoints == 0 ) ) bIsDefaultGeometry = true; } break; case DefaultType::Segments : { // Path/Segments const OUString sSegments( "Segments" ); pAny = const_cast(aGeometryItem).GetPropertyValueByName( sPath, sSegments ); if ( pAny ) { css::uno::Sequence< css::drawing::EnhancedCustomShapeSegment > seqSegments1, seqSegments2; if ( *pAny >>= seqSegments1 ) { if ( pDefCustomShape && pDefCustomShape->nElements && pDefCustomShape->pElements ) { sal_Int32 i, nCount = pDefCustomShape->nElements; if ( nCount ) { seqSegments2.realloc( nCount ); for ( i = 0; i < nCount; i++ ) { EnhancedCustomShapeSegment& rSegInfo = seqSegments2[ i ]; sal_uInt16 nSDat = pDefCustomShape->pElements[ i ]; lcl_ShapeSegmentFromBinary( rSegInfo, nSDat ); } if ( seqSegments1 == seqSegments2 ) bIsDefaultGeometry = true; } } else { // check if it's the default segment description ( M L Z N ) if ( seqSegments1.getLength() == 4 ) { if ( ( seqSegments1[ 0 ].Command == EnhancedCustomShapeSegmentCommand::MOVETO ) && ( seqSegments1[ 1 ].Command == EnhancedCustomShapeSegmentCommand::LINETO ) && ( seqSegments1[ 2 ].Command == EnhancedCustomShapeSegmentCommand::CLOSESUBPATH ) && ( seqSegments1[ 3 ].Command == EnhancedCustomShapeSegmentCommand::ENDSUBPATH ) ) bIsDefaultGeometry = true; } } } } else if ( pDefCustomShape && ( ( pDefCustomShape->nElements == 0 ) || ( pDefCustomShape->pElements == nullptr ) ) ) bIsDefaultGeometry = true; } break; case DefaultType::StretchX : { const OUString sStretchX( "StretchX" ); pAny = const_cast(aGeometryItem).GetPropertyValueByName( sPath, sStretchX ); if ( pAny && pDefCustomShape ) { sal_Int32 nStretchX = 0; if ( *pAny >>= nStretchX ) { if ( pDefCustomShape->nXRef == nStretchX ) bIsDefaultGeometry = true; } } else if ( pDefCustomShape && ( pDefCustomShape->nXRef == DEFAULT_MINIMUM_SIGNED_COMPARE ) ) bIsDefaultGeometry = true; } break; case DefaultType::StretchY : { const OUString sStretchY( "StretchY" ); pAny = const_cast(aGeometryItem).GetPropertyValueByName( sPath, sStretchY ); if ( pAny && pDefCustomShape ) { sal_Int32 nStretchY = 0; if ( *pAny >>= nStretchY ) { if ( pDefCustomShape->nYRef == nStretchY ) bIsDefaultGeometry = true; } } else if ( pDefCustomShape && ( pDefCustomShape->nYRef == DEFAULT_MINIMUM_SIGNED_COMPARE ) ) bIsDefaultGeometry = true; } break; case DefaultType::Equations : { const OUString sEquations( "Equations" ); pAny = const_cast(aGeometryItem).GetPropertyValueByName( sEquations ); if ( pAny && pDefCustomShape && pDefCustomShape->nCalculation && pDefCustomShape->pCalculation ) { css::uno::Sequence< OUString > seqEquations1, seqEquations2; if ( *pAny >>= seqEquations1 ) { sal_Int32 i, nCount = pDefCustomShape->nCalculation; seqEquations2.realloc( nCount ); const SvxMSDffCalculationData* pData = pDefCustomShape->pCalculation; for ( i = 0; i < nCount; i++, pData++ ) seqEquations2[ i ] = EnhancedCustomShape2d::GetEquation( pData->nFlags, pData->nVal[ 0 ], pData->nVal[ 1 ], pData->nVal[ 2 ] ); if ( seqEquations1 == seqEquations2 ) bIsDefaultGeometry = true; } } else if ( pDefCustomShape && ( ( pDefCustomShape->nCalculation == 0 ) || ( pDefCustomShape->pCalculation == nullptr ) ) ) bIsDefaultGeometry = true; } break; case DefaultType::TextFrames : { const OUString sTextFrames( "TextFrames" ); pAny = const_cast(aGeometryItem).GetPropertyValueByName( sPath, sTextFrames ); if ( pAny && pDefCustomShape && pDefCustomShape->nTextRect && pDefCustomShape->pTextRect ) { css::uno::Sequence< css::drawing::EnhancedCustomShapeTextFrame > seqTextFrames1, seqTextFrames2; if ( *pAny >>= seqTextFrames1 ) { sal_Int32 i, nCount = pDefCustomShape->nTextRect; seqTextFrames2.realloc( nCount ); const SvxMSDffTextRectangles* pRectangles = pDefCustomShape->pTextRect; for ( i = 0; i < nCount; i++, pRectangles++ ) { EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames2[ i ].TopLeft.First, pRectangles->nPairA.nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames2[ i ].TopLeft.Second, pRectangles->nPairA.nValB ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames2[ i ].BottomRight.First, pRectangles->nPairB.nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames2[ i ].BottomRight.Second, pRectangles->nPairB.nValB ); } if ( seqTextFrames1 == seqTextFrames2 ) bIsDefaultGeometry = true; } } else if ( pDefCustomShape && ( ( pDefCustomShape->nTextRect == 0 ) || ( pDefCustomShape->pTextRect == nullptr ) ) ) bIsDefaultGeometry = true; } break; } return bIsDefaultGeometry; } void SdrObjCustomShape::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const { rInfo.bResizeFreeAllowed=fObjectRotation == 0.0; rInfo.bResizePropAllowed=true; rInfo.bRotateFreeAllowed=true; rInfo.bRotate90Allowed =true; rInfo.bMirrorFreeAllowed=true; rInfo.bMirror45Allowed =true; rInfo.bMirror90Allowed =true; rInfo.bTransparenceAllowed = false; rInfo.bShearAllowed =true; rInfo.bEdgeRadiusAllowed=false; rInfo.bNoContortion =true; // #i37011# if ( mXRenderedCustomShape.is() ) { const SdrObject* pRenderedCustomShape = GetSdrObjectFromXShape( mXRenderedCustomShape ); if ( pRenderedCustomShape ) { // #i37262# // Iterate self over the contained objects, since there are combinations of // polygon and curve objects. In that case, aInfo.bCanConvToPath and // aInfo.bCanConvToPoly would be false. What is needed here is an or, not an and. SdrObjListIter aIterator(*pRenderedCustomShape); while(aIterator.IsMore()) { SdrObject* pCandidate = aIterator.Next(); SdrObjTransformInfoRec aInfo; pCandidate->TakeObjInfo(aInfo); // set path and poly conversion if one is possible since // this object will first be broken const bool bCanConvToPathOrPoly(aInfo.bCanConvToPath || aInfo.bCanConvToPoly); if(rInfo.bCanConvToPath != bCanConvToPathOrPoly) { rInfo.bCanConvToPath = bCanConvToPathOrPoly; } if(rInfo.bCanConvToPoly != bCanConvToPathOrPoly) { rInfo.bCanConvToPoly = bCanConvToPathOrPoly; } if(rInfo.bCanConvToContour != aInfo.bCanConvToContour) { rInfo.bCanConvToContour = aInfo.bCanConvToContour; } if(rInfo.bShearAllowed != aInfo.bShearAllowed) { rInfo.bShearAllowed = aInfo.bShearAllowed; } } } } } sal_uInt16 SdrObjCustomShape::GetObjIdentifier() const { return sal_uInt16(OBJ_CUSTOMSHAPE); } // #115391# This implementation is based on the TextFrame size of the CustomShape and the // state of the ResizeShapeToFitText flag to correctly set TextMinFrameWidth/Height void SdrObjCustomShape::AdaptTextMinSize() { if (!getSdrModelFromSdrObject().IsCreatingDataObj() && !getSdrModelFromSdrObject().IsPasteResize()) { const bool bResizeShapeToFitText(GetObjectItem(SDRATTR_TEXT_AUTOGROWHEIGHT).GetValue()); SfxItemSet aSet( *GetObjectItemSet().GetPool(), svl::Items{}); // contains SDRATTR_TEXT_MAXFRAMEWIDTH bool bChanged(false); if(bResizeShapeToFitText) { // always reset MinWidthHeight to zero to only rely on text size and frame size // to allow resizing being completely dependent on text size only aSet.Put(makeSdrTextMinFrameWidthItem(0)); aSet.Put(makeSdrTextMinFrameHeightItem(0)); bChanged = true; } else { // recreate from CustomShape-specific TextBounds tools::Rectangle aTextBound(maRect); if(GetTextBounds(aTextBound)) { const long nHDist(GetTextLeftDistance() + GetTextRightDistance()); const long nVDist(GetTextUpperDistance() + GetTextLowerDistance()); const long nTWdt(std::max(long(0), static_cast(aTextBound.GetWidth() - 1 - nHDist))); const long nTHgt(std::max(long(0), static_cast(aTextBound.GetHeight() - 1 - nVDist))); aSet.Put(makeSdrTextMinFrameWidthItem(nTWdt)); aSet.Put(makeSdrTextMinFrameHeightItem(nTHgt)); bChanged = true; } } if(bChanged) SetObjectItemSet(aSet); } } void SdrObjCustomShape::NbcSetSnapRect( const tools::Rectangle& rRect ) { maRect = rRect; ImpJustifyRect(maRect); InvalidateRenderGeometry(); AdaptTextMinSize(); ImpCheckShear(); SetRectsDirty(); SetChanged(); } void SdrObjCustomShape::SetSnapRect( const tools::Rectangle& rRect ) { tools::Rectangle aBoundRect0; if ( pUserCall ) aBoundRect0 = GetLastBoundRect(); NbcSetSnapRect( rRect ); BroadcastObjectChange(); SendUserCall(SdrUserCallType::Resize,aBoundRect0); } void SdrObjCustomShape::NbcSetLogicRect( const tools::Rectangle& rRect ) { maRect = rRect; ImpJustifyRect(maRect); InvalidateRenderGeometry(); AdaptTextMinSize(); SetRectsDirty(); SetChanged(); } void SdrObjCustomShape::SetLogicRect( const tools::Rectangle& rRect ) { tools::Rectangle aBoundRect0; if ( pUserCall ) aBoundRect0 = GetLastBoundRect(); NbcSetLogicRect(rRect); BroadcastObjectChange(); SendUserCall(SdrUserCallType::Resize,aBoundRect0); } void SdrObjCustomShape::Move( const Size& rSiz ) { if ( rSiz.Width() || rSiz.Height() ) { tools::Rectangle aBoundRect0; if ( pUserCall ) aBoundRect0 = GetLastBoundRect(); NbcMove(rSiz); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::MoveOnly,aBoundRect0); } } void SdrObjCustomShape::NbcMove( const Size& rSiz ) { SdrTextObj::NbcMove( rSiz ); if ( mXRenderedCustomShape.is() ) { SdrObject* pRenderedCustomShape = GetSdrObjectFromXShape( mXRenderedCustomShape ); if ( pRenderedCustomShape ) { // #i97149# the visualisation shape needs to be informed // about change, too pRenderedCustomShape->ActionChanged(); pRenderedCustomShape->NbcMove( rSiz ); } } // #i37011# adapt geometry shadow if(mpLastShadowGeometry) { mpLastShadowGeometry->NbcMove( rSiz ); } } void SdrObjCustomShape::NbcResize( const Point& rRef, const Fraction& rxFact, const Fraction& ryFact ) { // taking care of handles that should not been changed tools::Rectangle aOld( maRect ); std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles() ); SdrTextObj::NbcResize( rRef, rxFact, ryFact ); if ( ( rxFact.GetNumerator() != rxFact.GetDenominator() ) || ( ryFact.GetNumerator()!= ryFact.GetDenominator() ) ) { if ( ( ( rxFact.GetNumerator() < 0 ) && ( rxFact.GetDenominator() > 0 ) ) || ( ( rxFact.GetNumerator() > 0 ) && ( rxFact.GetDenominator() < 0 ) ) ) { SetMirroredX( !IsMirroredX() ); } if ( ( ( ryFact.GetNumerator() < 0 ) && ( ryFact.GetDenominator() > 0 ) ) || ( ( ryFact.GetNumerator() > 0 ) && ( ryFact.GetDenominator() < 0 ) ) ) { SetMirroredY( !IsMirroredY() ); } } for (std::vector< SdrCustomShapeInteraction >::const_iterator aIter( aInteractionHandles.begin() ), aEnd( aInteractionHandles.end() ); aIter != aEnd; ++aIter ) { try { if ( aIter->nMode & CustomShapeHandleModes::RESIZE_FIXED ) aIter->xInteraction->setControllerPosition( aIter->aPosition ); if ( aIter->nMode & CustomShapeHandleModes::RESIZE_ABSOLUTE_X ) { sal_Int32 nX = ( aIter->aPosition.X - aOld.Left() ) + maRect.Left(); aIter->xInteraction->setControllerPosition( css::awt::Point( nX, aIter->xInteraction->getPosition().Y ) ); } else if ( aIter->nMode & CustomShapeHandleModes::RESIZE_ABSOLUTE_NEGX ) { sal_Int32 nX = maRect.Right() - (aOld.Right() - aIter->aPosition.X); aIter->xInteraction->setControllerPosition( css::awt::Point( nX, aIter->xInteraction->getPosition().Y ) ); } if ( aIter->nMode & CustomShapeHandleModes::RESIZE_ABSOLUTE_Y ) { sal_Int32 nY = ( aIter->aPosition.Y - aOld.Top() ) + maRect.Top(); aIter->xInteraction->setControllerPosition( css::awt::Point( aIter->xInteraction->getPosition().X, nY ) ); } } catch ( const uno::RuntimeException& ) { } } InvalidateRenderGeometry(); } void SdrObjCustomShape::NbcRotate( const Point& rRef, long nAngle, double sn, double cs ) { bool bMirroredX = IsMirroredX(); bool bMirroredY = IsMirroredY(); fObjectRotation = fmod( fObjectRotation, 360.0 ); if ( fObjectRotation < 0 ) fObjectRotation = 360 + fObjectRotation; // the rotation angle for ashapes is stored in fObjectRotation, this rotation // has to be applied to the text object (which is internally using aGeo.nAngle). SdrTextObj::NbcRotate( maRect.TopLeft(), -aGeo.nRotationAngle, // retrieving the unrotated text object sin( (-aGeo.nRotationAngle) * F_PI18000 ), cos( (-aGeo.nRotationAngle) * F_PI18000 ) ); aGeo.nRotationAngle = 0; // resetting aGeo data aGeo.RecalcSinCos(); long nW = static_cast( fObjectRotation * 100 ); // applying our object rotation if ( bMirroredX ) nW = 36000 - nW; if ( bMirroredY ) nW = 18000 - nW; nW = nW % 36000; if ( nW < 0 ) nW = 36000 + nW; SdrTextObj::NbcRotate( maRect.TopLeft(), nW, // applying text rotation sin( nW * F_PI18000 ), cos( nW * F_PI18000 ) ); int nSwap = 0; if ( bMirroredX ) nSwap ^= 1; if ( bMirroredY ) nSwap ^= 1; double fAngle = nAngle; // updating to our new object rotation fAngle /= 100.0; fObjectRotation = fmod( nSwap ? fObjectRotation - fAngle : fObjectRotation + fAngle, 360.0 ); if ( fObjectRotation < 0 ) fObjectRotation = 360 + fObjectRotation; SdrTextObj::NbcRotate( rRef, nAngle, sn, cs ); // applying text rotation InvalidateRenderGeometry(); } void SdrObjCustomShape::NbcMirror( const Point& rRef1, const Point& rRef2 ) { // TTTT: Fix for old mirroring, can be removed again in aw080 // storing horizontal and vertical flipping without modifying the rotate angle // decompose other flipping to rotation and MirrorX. long ndx = rRef2.X()-rRef1.X(); long ndy = rRef2.Y()-rRef1.Y(); if(!ndx) // MirroredX { SetMirroredX(!IsMirroredX()); SdrTextObj::NbcMirror( rRef1, rRef2 ); } else { if(!ndy) // MirroredY { SetMirroredY(!IsMirroredY()); SdrTextObj::NbcMirror( rRef1, rRef2 ); } else // neither horizontal nor vertical { SetMirroredX(!IsMirroredX()); // call parent SdrTextObj::NbcMirror( rRef1, rRef2 ); // update fObjectRotation long nTextObjRotation = aGeo.nRotationAngle; double fAngle = nTextObjRotation; fAngle /= 100.0; bool bSingleFlip = (IsMirroredX()!= IsMirroredY()); fObjectRotation = fmod( bSingleFlip ? -fAngle : fAngle, 360.0 ); if ( fObjectRotation < 0 ) { fObjectRotation = 360.0 + fObjectRotation; } } } InvalidateRenderGeometry(); } void SdrObjCustomShape::Shear( const Point& rRef, long nAngle, double tn, bool bVShear ) { SdrTextObj::Shear( rRef, nAngle, tn, bVShear ); InvalidateRenderGeometry(); } void SdrObjCustomShape::NbcShear( const Point& rRef, long nAngle, double tn, bool bVShear ) { // TTTT: Fix for old mirroring, can be removed again in aw080 SdrTextObj::NbcShear(rRef,nAngle,tn,bVShear); // updating fObjectRotation long nTextObjRotation = aGeo.nRotationAngle; double fAngle = nTextObjRotation; fAngle /= 100.0; bool bSingleFlip = (IsMirroredX()!= IsMirroredY()); fObjectRotation = fmod( bSingleFlip ? -fAngle : fAngle, 360.0 ); if ( fObjectRotation < 0 ) { fObjectRotation = 360.0 + fObjectRotation; } InvalidateRenderGeometry(); } SdrGluePoint SdrObjCustomShape::GetVertexGluePoint(sal_uInt16 nPosNum) const { sal_Int32 nWdt = ImpGetLineWdt(); // #i25616# // #i25616# if(!LineIsOutsideGeometry()) { nWdt++; nWdt /= 2; } Point aPt; switch (nPosNum) { case 0: aPt=maRect.TopCenter(); aPt.AdjustY( -nWdt ); break; case 1: aPt=maRect.RightCenter(); aPt.AdjustX(nWdt ); break; case 2: aPt=maRect.BottomCenter(); aPt.AdjustY(nWdt ); break; case 3: aPt=maRect.LeftCenter(); aPt.AdjustX( -nWdt ); break; } if (aGeo.nShearAngle!=0) ShearPoint(aPt,maRect.TopLeft(),aGeo.nTan); if (aGeo.nRotationAngle!=0) RotatePoint(aPt,maRect.TopLeft(),aGeo.nSin,aGeo.nCos); aPt-=GetSnapRect().Center(); SdrGluePoint aGP(aPt); aGP.SetPercent(false); return aGP; } // #i38892# void SdrObjCustomShape::ImpCheckCustomGluePointsAreAdded() { const SdrObject* pSdrObject = GetSdrObjectFromCustomShape(); if(pSdrObject) { const SdrGluePointList* pSource = pSdrObject->GetGluePointList(); if(pSource && pSource->GetCount()) { if(!SdrTextObj::GetGluePointList()) { SdrTextObj::ForceGluePointList(); } const SdrGluePointList* pList = SdrTextObj::GetGluePointList(); if(pList) { SdrGluePointList aNewList; sal_uInt16 a; for(a = 0; a < pSource->GetCount(); a++) { SdrGluePoint aCopy((*pSource)[a]); aCopy.SetUserDefined(false); aNewList.Insert(aCopy); } bool bMirroredX = IsMirroredX(); bool bMirroredY = IsMirroredY(); long nShearAngle = aGeo.nShearAngle; double fTan = aGeo.nTan; if ( aGeo.nRotationAngle || nShearAngle || bMirroredX || bMirroredY ) { tools::Polygon aPoly( maRect ); if( nShearAngle ) { sal_uInt16 nPointCount=aPoly.GetSize(); for (sal_uInt16 i=0; iGetCount(); a++) { const SdrGluePoint& rCandidate = (*pList)[a]; if(rCandidate.IsUserDefined()) { aNewList.Insert(rCandidate); } } // copy new list to local. This is NOT very convenient behavior, the local // GluePointList should not be set, but we delivered by using GetGluePointList(), // maybe on demand. Since the local object is changed here, this is assumed to // be a result of GetGluePointList and thus the list is copied if(pPlusData) { pPlusData->SetGluePoints(aNewList); } } } } } // #i38892# const SdrGluePointList* SdrObjCustomShape::GetGluePointList() const { const_cast(this)->ImpCheckCustomGluePointsAreAdded(); return SdrTextObj::GetGluePointList(); } // #i38892# SdrGluePointList* SdrObjCustomShape::ForceGluePointList() { if(SdrTextObj::ForceGluePointList()) { ImpCheckCustomGluePointsAreAdded(); return SdrTextObj::ForceGluePointList(); } else { return nullptr; } } sal_uInt32 SdrObjCustomShape::GetHdlCount() const { const sal_uInt32 nBasicHdlCount(SdrTextObj::GetHdlCount()); std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles() ); return ( aInteractionHandles.size() + nBasicHdlCount ); } SdrHdl* SdrObjCustomShape::GetHdl( sal_uInt32 nHdlNum ) const { SdrHdl* pH = nullptr; const sal_uInt32 nBasicHdlCount(SdrTextObj::GetHdlCount()); if ( nHdlNum < nBasicHdlCount ) pH = SdrTextObj::GetHdl( nHdlNum ); else { std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles() ); const sal_uInt32 nCustomShapeHdlNum(nHdlNum - nBasicHdlCount); if ( nCustomShapeHdlNum < aInteractionHandles.size() ) { if ( aInteractionHandles[ nCustomShapeHdlNum ].xInteraction.is() ) { try { css::awt::Point aPosition( aInteractionHandles[ nCustomShapeHdlNum ].xInteraction->getPosition() ); pH = new SdrHdl( Point( aPosition.X, aPosition.Y ), SdrHdlKind::CustomShape1 ); pH->SetPointNum( nCustomShapeHdlNum ); pH->SetObj( const_cast(this) ); } catch ( const uno::RuntimeException& ) { } } } } return pH; } bool SdrObjCustomShape::hasSpecialDrag() const { return true; } bool SdrObjCustomShape::beginSpecialDrag(SdrDragStat& rDrag) const { const SdrHdl* pHdl = rDrag.GetHdl(); if(pHdl && SdrHdlKind::CustomShape1 == pHdl->GetKind()) { rDrag.SetEndDragChangesAttributes(true); rDrag.SetNoSnap(); } else { const SdrHdl* pHdl2 = rDrag.GetHdl(); const SdrHdlKind eHdl((pHdl2 == nullptr) ? SdrHdlKind::Move : pHdl2->GetKind()); switch( eHdl ) { case SdrHdlKind::UpperLeft : case SdrHdlKind::Upper : case SdrHdlKind::UpperRight : case SdrHdlKind::Left : case SdrHdlKind::Right : case SdrHdlKind::LowerLeft : case SdrHdlKind::Lower : case SdrHdlKind::LowerRight : case SdrHdlKind::Move : { break; } default: { return false; } } } return true; } void SdrObjCustomShape::DragResizeCustomShape( const tools::Rectangle& rNewRect ) { tools::Rectangle aOld( maRect ); bool bOldMirroredX( IsMirroredX() ); bool bOldMirroredY( IsMirroredY() ); tools::Rectangle aNewRect( rNewRect ); aNewRect.Justify(); std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles() ); GeoStat aGeoStat( GetGeoStat() ); if ( aNewRect.TopLeft()!= maRect.TopLeft() && ( aGeo.nRotationAngle || aGeo.nShearAngle ) ) { Point aNewPos( aNewRect.TopLeft() ); if ( aGeo.nShearAngle ) ShearPoint( aNewPos, aOld.TopLeft(), aGeoStat.nTan ); if ( aGeo.nRotationAngle ) RotatePoint(aNewPos, aOld.TopLeft(), aGeoStat.nSin, aGeoStat.nCos ); aNewRect.SetPos( aNewPos ); } if ( aNewRect != maRect ) { SetLogicRect( aNewRect ); InvalidateRenderGeometry(); if ( rNewRect.Left() > rNewRect.Right() ) { Point aTop( ( GetSnapRect().Left() + GetSnapRect().Right() ) >> 1, GetSnapRect().Top() ); Point aBottom( aTop.X(), aTop.Y() + 1000 ); NbcMirror( aTop, aBottom ); } if ( rNewRect.Top() > rNewRect.Bottom() ) { Point aLeft( GetSnapRect().Left(), ( GetSnapRect().Top() + GetSnapRect().Bottom() ) >> 1 ); Point aRight( aLeft.X() + 1000, aLeft.Y() ); NbcMirror( aLeft, aRight ); } for (std::vector< SdrCustomShapeInteraction >::const_iterator aIter( aInteractionHandles.begin() ), aEnd( aInteractionHandles.end() ); aIter != aEnd ; ++aIter ) { try { if ( aIter->nMode & CustomShapeHandleModes::RESIZE_FIXED ) aIter->xInteraction->setControllerPosition( aIter->aPosition ); if ( aIter->nMode & CustomShapeHandleModes::RESIZE_ABSOLUTE_X || aIter->nMode & CustomShapeHandleModes::RESIZE_ABSOLUTE_NEGX ) { if (aIter->nMode & CustomShapeHandleModes::RESIZE_ABSOLUTE_NEGX) bOldMirroredX = !bOldMirroredX; sal_Int32 nX; if ( bOldMirroredX ) { nX = ( aIter->aPosition.X - aOld.Right() ); if ( rNewRect.Left() > rNewRect.Right() ) nX = maRect.Left() - nX; else nX += maRect.Right(); } else { nX = ( aIter->aPosition.X - aOld.Left() ); if ( rNewRect.Left() > rNewRect.Right() ) nX = maRect.Right() - nX; else nX += maRect.Left(); } aIter->xInteraction->setControllerPosition( css::awt::Point( nX, aIter->xInteraction->getPosition().Y ) ); } if ( aIter->nMode & CustomShapeHandleModes::RESIZE_ABSOLUTE_Y ) { sal_Int32 nY; if ( bOldMirroredY ) { nY = ( aIter->aPosition.Y - aOld.Bottom() ); if ( rNewRect.Top() > rNewRect.Bottom() ) nY = maRect.Top() - nY; else nY += maRect.Bottom(); } else { nY = ( aIter->aPosition.Y - aOld.Top() ); if ( rNewRect.Top() > rNewRect.Bottom() ) nY = maRect.Bottom() - nY; else nY += maRect.Top(); } aIter->xInteraction->setControllerPosition( css::awt::Point( aIter->xInteraction->getPosition().X, nY ) ); } } catch ( const uno::RuntimeException& ) { } } } } void SdrObjCustomShape::DragMoveCustomShapeHdl( const Point& rDestination, const sal_uInt16 nCustomShapeHdlNum, bool bMoveCalloutRectangle ) { std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles() ); if ( nCustomShapeHdlNum < aInteractionHandles.size() ) { SdrCustomShapeInteraction aInteractionHandle( aInteractionHandles[ nCustomShapeHdlNum ] ); if ( aInteractionHandle.xInteraction.is() ) { try { css::awt::Point aPt( rDestination.X(), rDestination.Y() ); if ( aInteractionHandle.nMode & CustomShapeHandleModes::MOVE_SHAPE && bMoveCalloutRectangle ) { sal_Int32 nXDiff = aPt.X - aInteractionHandle.aPosition.X; sal_Int32 nYDiff = aPt.Y - aInteractionHandle.aPosition.Y; maRect.Move( nXDiff, nYDiff ); aOutRect.Move( nXDiff, nYDiff ); maSnapRect.Move( nXDiff, nYDiff ); SetRectsDirty(true); InvalidateRenderGeometry(); for (std::vector< SdrCustomShapeInteraction >::const_iterator aIter( aInteractionHandles.begin() ), aEnd( aInteractionHandles.end() ) ; aIter != aEnd; ++aIter) { if ( aIter->nMode & CustomShapeHandleModes::RESIZE_FIXED ) { if ( aIter->xInteraction.is() ) aIter->xInteraction->setControllerPosition( aIter->aPosition ); } } } aInteractionHandle.xInteraction->setControllerPosition( aPt ); } catch ( const uno::RuntimeException& ) { } } } } bool SdrObjCustomShape::applySpecialDrag(SdrDragStat& rDrag) { const SdrHdl* pHdl = rDrag.GetHdl(); const SdrHdlKind eHdl((pHdl == nullptr) ? SdrHdlKind::Move : pHdl->GetKind()); switch(eHdl) { case SdrHdlKind::CustomShape1 : { rDrag.SetEndDragChangesGeoAndAttributes(true); DragMoveCustomShapeHdl( rDrag.GetNow(), static_cast(pHdl->GetPointNum()), !rDrag.GetDragMethod()->IsShiftPressed() ); SetRectsDirty(); InvalidateRenderGeometry(); SetChanged(); break; } case SdrHdlKind::UpperLeft : case SdrHdlKind::Upper : case SdrHdlKind::UpperRight : case SdrHdlKind::Left : case SdrHdlKind::Right : case SdrHdlKind::LowerLeft : case SdrHdlKind::Lower : case SdrHdlKind::LowerRight : { DragResizeCustomShape( ImpDragCalcRect(rDrag) ); break; } case SdrHdlKind::Move : { Move(Size(rDrag.GetDX(), rDrag.GetDY())); break; } default: break; } return true; } void SdrObjCustomShape::DragCreateObject( SdrDragStat& rStat ) { tools::Rectangle aRect1; rStat.TakeCreateRect( aRect1 ); std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles() ); sal_uInt32 const nDefaultObjectSizeWidth = 3000; // default width from SDOptions ? sal_uInt32 const nDefaultObjectSizeHeight= 3000; if ( ImpVerticalSwitch( *this ) ) { SetMirroredX( aRect1.Left() > aRect1.Right() ); aRect1 = tools::Rectangle( rStat.GetNow(), Size( nDefaultObjectSizeWidth, nDefaultObjectSizeHeight ) ); // subtracting the horizontal difference of the latest handle from shape position if ( !aInteractionHandles.empty() ) { sal_Int32 nHandlePos = aInteractionHandles[ aInteractionHandles.size() - 1 ].xInteraction->getPosition().X; aRect1.Move( maRect.Left() - nHandlePos, 0 ); } } ImpJustifyRect( aRect1 ); rStat.SetActionRect( aRect1 ); maRect = aRect1; SetRectsDirty(); for (std::vector< SdrCustomShapeInteraction >::const_iterator aIter( aInteractionHandles.begin() ), aEnd( aInteractionHandles.end() ); aIter != aEnd ; ++aIter) { try { if ( aIter->nMode & CustomShapeHandleModes::CREATE_FIXED ) aIter->xInteraction->setControllerPosition( awt::Point( rStat.GetStart().X(), rStat.GetStart().Y() ) ); } catch ( const uno::RuntimeException& ) { } } SetBoundRectDirty(); bSnapRectDirty=true; } bool SdrObjCustomShape::MovCreate(SdrDragStat& rStat) { SdrView* pView = rStat.GetView(); // #i37448# if( pView && pView->IsSolidDragging() ) { InvalidateRenderGeometry(); } DragCreateObject( rStat ); SetRectsDirty(); return true; } bool SdrObjCustomShape::EndCreate( SdrDragStat& rStat, SdrCreateCmd eCmd ) { DragCreateObject( rStat ); AdaptTextMinSize(); SetRectsDirty(); return ( eCmd == SdrCreateCmd::ForceEnd || rStat.GetPointCount() >= 2 ); } basegfx::B2DPolyPolygon SdrObjCustomShape::TakeCreatePoly(const SdrDragStat& /*rDrag*/) const { return GetLineGeometry( false ); } // in context with the SdrObjCustomShape the SdrTextAutoGrowHeightItem == true -> Resize Shape to fit text, // the SdrTextAutoGrowWidthItem == true -> Word wrap text in Shape bool SdrObjCustomShape::IsAutoGrowHeight() const { const SfxItemSet& rSet = GetMergedItemSet(); bool bIsAutoGrowHeight = rSet.Get(SDRATTR_TEXT_AUTOGROWHEIGHT).GetValue(); if ( bIsAutoGrowHeight && IsVerticalWriting() ) bIsAutoGrowHeight = !rSet.Get(SDRATTR_TEXT_WORDWRAP).GetValue(); return bIsAutoGrowHeight; } bool SdrObjCustomShape::IsAutoGrowWidth() const { const SfxItemSet& rSet = GetMergedItemSet(); bool bIsAutoGrowWidth = rSet.Get(SDRATTR_TEXT_AUTOGROWHEIGHT).GetValue(); if ( bIsAutoGrowWidth && !IsVerticalWriting() ) bIsAutoGrowWidth = !rSet.Get(SDRATTR_TEXT_WORDWRAP).GetValue(); return bIsAutoGrowWidth; } /* The following method is identical to the SdrTextObj::SetVerticalWriting method, the only difference is that the SdrAutoGrowWidthItem and SdrAutoGrowHeightItem are not exchanged if the vertical writing mode has been changed */ void SdrObjCustomShape::SetVerticalWriting( bool bVertical ) { ForceOutlinerParaObject(); OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject(); DBG_ASSERT( pOutlinerParaObject, "SdrTextObj::SetVerticalWriting() without OutlinerParaObject!" ); if( pOutlinerParaObject ) { if(pOutlinerParaObject->IsVertical() != bVertical) { // get item settings const SfxItemSet& rSet = GetObjectItemSet(); // Also exchange horizontal and vertical adjust items SdrTextHorzAdjust eHorz = rSet.Get(SDRATTR_TEXT_HORZADJUST).GetValue(); SdrTextVertAdjust eVert = rSet.Get(SDRATTR_TEXT_VERTADJUST).GetValue(); // rescue object size tools::Rectangle aObjectRect = GetSnapRect(); // prepare ItemSet to set exchanged width and height items SfxItemSet aNewSet(*rSet.GetPool(), svl::Items{}); aNewSet.Put(rSet); // Exchange horizontal and vertical adjusts switch(eVert) { case SDRTEXTVERTADJUST_TOP: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT)); break; case SDRTEXTVERTADJUST_CENTER: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_CENTER)); break; case SDRTEXTVERTADJUST_BOTTOM: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_LEFT)); break; case SDRTEXTVERTADJUST_BLOCK: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_BLOCK)); break; } switch(eHorz) { case SDRTEXTHORZADJUST_LEFT: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_BOTTOM)); break; case SDRTEXTHORZADJUST_CENTER: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_CENTER)); break; case SDRTEXTHORZADJUST_RIGHT: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_TOP)); break; case SDRTEXTHORZADJUST_BLOCK: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_BLOCK)); break; } pOutlinerParaObject = GetOutlinerParaObject(); if ( pOutlinerParaObject ) pOutlinerParaObject->SetVertical(bVertical); SetObjectItemSet( aNewSet ); // restore object size SetSnapRect(aObjectRect); } } } void SdrObjCustomShape::SuggestTextFrameSize(Size aSuggestedTextFrameSize) { m_aSuggestedTextFrameSize = aSuggestedTextFrameSize; } bool SdrObjCustomShape::AdjustTextFrameWidthAndHeight(tools::Rectangle& rR, bool bHgt, bool bWdt) const { // Either we have text or the application has native text and suggested its size to us. bool bHasText = HasText() || (m_aSuggestedTextFrameSize.Width() != 0 && m_aSuggestedTextFrameSize.Height() != 0); if ( bHasText && !rR.IsEmpty() ) { bool bWdtGrow=bWdt && IsAutoGrowWidth(); bool bHgtGrow=bHgt && IsAutoGrowHeight(); if ( bWdtGrow || bHgtGrow ) { tools::Rectangle aR0(rR); long nHgt=0,nMinHgt=0,nMaxHgt=0; long nWdt=0,nMinWdt=0,nMaxWdt=0; Size aSiz(rR.GetSize()); aSiz.AdjustWidth( -1 ); aSiz.AdjustHeight( -1 ); Size aMaxSiz(100000,100000); Size aTmpSiz(getSdrModelFromSdrObject().GetMaxObjSize()); if (aTmpSiz.Width()!=0) aMaxSiz.setWidth(aTmpSiz.Width() ); if (aTmpSiz.Height()!=0) aMaxSiz.setHeight(aTmpSiz.Height() ); if (bWdtGrow) { nMinWdt=GetMinTextFrameWidth(); nMaxWdt=GetMaxTextFrameWidth(); if (nMaxWdt==0 || nMaxWdt>aMaxSiz.Width()) nMaxWdt=aMaxSiz.Width(); if (nMinWdt<=0) nMinWdt=1; aSiz.setWidth(nMaxWdt ); } if (bHgtGrow) { nMinHgt=GetMinTextFrameHeight(); nMaxHgt=GetMaxTextFrameHeight(); if (nMaxHgt==0 || nMaxHgt>aMaxSiz.Height()) nMaxHgt=aMaxSiz.Height(); if (nMinHgt<=0) nMinHgt=1; aSiz.setHeight(nMaxHgt ); } long nHDist=GetTextLeftDistance()+GetTextRightDistance(); long nVDist=GetTextUpperDistance()+GetTextLowerDistance(); aSiz.AdjustWidth( -nHDist ); aSiz.AdjustHeight( -nVDist ); if ( aSiz.Width() < 2 ) aSiz.setWidth( 2 ); // minimum size=2 if ( aSiz.Height() < 2 ) aSiz.setHeight( 2 ); // minimum size=2 if (HasText()) { if(pEdtOutl) { pEdtOutl->SetMaxAutoPaperSize( aSiz ); if (bWdtGrow) { Size aSiz2(pEdtOutl->CalcTextSize()); nWdt=aSiz2.Width()+1; // a little more tolerance if (bHgtGrow) nHgt=aSiz2.Height()+1; // a little more tolerance } else { nHgt=pEdtOutl->GetTextHeight()+1; // a little more tolerance } } else { Outliner& rOutliner=ImpGetDrawOutliner(); rOutliner.SetPaperSize(aSiz); rOutliner.SetUpdateMode(true); // TODO: add the optimization with bPortionInfoChecked again. OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject(); if( pOutlinerParaObject != nullptr ) { rOutliner.SetText(*pOutlinerParaObject); rOutliner.SetFixedCellHeight(GetMergedItem(SDRATTR_TEXT_USEFIXEDCELLHEIGHT).GetValue()); } if ( bWdtGrow ) { Size aSiz2(rOutliner.CalcTextSize()); nWdt=aSiz2.Width()+1; // a little more tolerance if ( bHgtGrow ) nHgt=aSiz2.Height()+1; // a little more tolerance } else nHgt = rOutliner.GetTextHeight()+1; // a little more tolerance rOutliner.Clear(); } } else { nHgt = m_aSuggestedTextFrameSize.Height(); nWdt = m_aSuggestedTextFrameSize.Width(); } if ( nWdt < nMinWdt ) nWdt = nMinWdt; if ( nWdt > nMaxWdt ) nWdt = nMaxWdt; nWdt += nHDist; if ( nWdt < 1 ) nWdt = 1; // nHDist may also be negative if ( nHgt < nMinHgt ) nHgt = nMinHgt; if ( nHgt > nMaxHgt ) nHgt = nMaxHgt; nHgt+=nVDist; if ( nHgt < 1 ) nHgt = 1; // nVDist may also be negative long nWdtGrow = nWdt-(rR.Right()-rR.Left()); long nHgtGrow = nHgt-(rR.Bottom()-rR.Top()); if ( nWdtGrow == 0 ) bWdtGrow = false; if ( nHgtGrow == 0 ) bHgtGrow=false; if ( bWdtGrow || bHgtGrow ) { if ( bWdtGrow ) { SdrTextHorzAdjust eHAdj=GetTextHorizontalAdjust(); if ( eHAdj == SDRTEXTHORZADJUST_LEFT ) rR.AdjustRight(nWdtGrow ); else if ( eHAdj == SDRTEXTHORZADJUST_RIGHT ) rR.AdjustLeft( -nWdtGrow ); else { long nWdtGrow2=nWdtGrow/2; rR.AdjustLeft( -nWdtGrow2 ); rR.SetRight(rR.Left()+nWdt ); } } if ( bHgtGrow ) { SdrTextVertAdjust eVAdj=GetTextVerticalAdjust(); if ( eVAdj == SDRTEXTVERTADJUST_TOP ) rR.AdjustBottom(nHgtGrow ); else if ( eVAdj == SDRTEXTVERTADJUST_BOTTOM ) rR.AdjustTop( -nHgtGrow ); else { long nHgtGrow2=nHgtGrow/2; rR.AdjustTop( -nHgtGrow2 ); rR.SetBottom(rR.Top()+nHgt ); } } if ( aGeo.nRotationAngle ) { Point aD1(rR.TopLeft()); aD1-=aR0.TopLeft(); Point aD2(aD1); RotatePoint(aD2,Point(),aGeo.nSin,aGeo.nCos); aD2-=aD1; rR.Move(aD2.X(),aD2.Y()); } return true; } } } return false; } tools::Rectangle SdrObjCustomShape::ImpCalculateTextFrame( const bool bHgt, const bool bWdt ) { tools::Rectangle aReturnValue; tools::Rectangle aOldTextRect( maRect ); // <- initial text rectangle tools::Rectangle aNewTextRect( maRect ); // <- new text rectangle returned from the custom shape renderer, GetTextBounds( aNewTextRect ); // it depends to the current logical shape size tools::Rectangle aAdjustedTextRect( aNewTextRect ); // <- new text rectangle is being tested by AdjustTextFrameWidthAndHeight to ensure if ( AdjustTextFrameWidthAndHeight( aAdjustedTextRect, bHgt, bWdt ) ) // that the new text rectangle is matching the current text size from the outliner { if (aAdjustedTextRect != aNewTextRect && aOldTextRect != aAdjustedTextRect && aNewTextRect.GetWidth() && aNewTextRect.GetHeight()) { aReturnValue = maRect; double fXScale = static_cast(aOldTextRect.GetWidth()) / static_cast(aNewTextRect.GetWidth()); double fYScale = static_cast(aOldTextRect.GetHeight()) / static_cast(aNewTextRect.GetHeight()); double fRightDiff = static_cast( aAdjustedTextRect.Right() - aNewTextRect.Right() ) * fXScale; double fLeftDiff = static_cast( aAdjustedTextRect.Left() - aNewTextRect.Left() ) * fXScale; double fTopDiff = static_cast( aAdjustedTextRect.Top() - aNewTextRect.Top() ) * fYScale; double fBottomDiff= static_cast( aAdjustedTextRect.Bottom()- aNewTextRect.Bottom()) * fYScale; aReturnValue.AdjustLeft(static_cast(fLeftDiff) ); aReturnValue.AdjustRight(static_cast(fRightDiff) ); aReturnValue.AdjustTop(static_cast(fTopDiff) ); aReturnValue.AdjustBottom(static_cast(fBottomDiff) ); } } return aReturnValue; } bool SdrObjCustomShape::NbcAdjustTextFrameWidthAndHeight(bool bHgt, bool bWdt) { tools::Rectangle aNewTextRect = ImpCalculateTextFrame(bHgt, bWdt); const bool bRet = !aNewTextRect.IsEmpty() && aNewTextRect != maRect; if (bRet && !mbAdjustingTextFrameWidthAndHeight) { mbAdjustingTextFrameWidthAndHeight = true; // taking care of handles that should not been changed std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles() ); maRect = aNewTextRect; SetRectsDirty(); SetChanged(); for (std::vector< SdrCustomShapeInteraction >::const_iterator aIter( aInteractionHandles.begin() ), aEnd ( aInteractionHandles.end() ); aIter != aEnd ; ++aIter) { try { if ( aIter->nMode & CustomShapeHandleModes::RESIZE_FIXED ) aIter->xInteraction->setControllerPosition( aIter->aPosition ); } catch ( const uno::RuntimeException& ) { } } InvalidateRenderGeometry(); mbAdjustingTextFrameWidthAndHeight = false; } return bRet; } bool SdrObjCustomShape::AdjustTextFrameWidthAndHeight() { tools::Rectangle aNewTextRect = ImpCalculateTextFrame( true/*bHgt*/, true/*bWdt*/ ); bool bRet = !aNewTextRect.IsEmpty() && ( aNewTextRect != maRect ); if ( bRet ) { tools::Rectangle aBoundRect0; if ( pUserCall ) aBoundRect0 = GetCurrentBoundRect(); // taking care of handles that should not been changed std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles() ); maRect = aNewTextRect; SetRectsDirty(); for (std::vector< SdrCustomShapeInteraction >::const_iterator aIter( aInteractionHandles.begin() ), aEnd( aInteractionHandles.end() ) ; aIter != aEnd ; ++aIter) { try { if ( aIter->nMode & CustomShapeHandleModes::RESIZE_FIXED ) aIter->xInteraction->setControllerPosition( aIter->aPosition ); } catch ( const uno::RuntimeException& ) { } } InvalidateRenderGeometry(); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::Resize,aBoundRect0); } return bRet; } void SdrObjCustomShape::TakeTextEditArea(Size* pPaperMin, Size* pPaperMax, tools::Rectangle* pViewInit, tools::Rectangle* pViewMin) const { Size aPaperMin,aPaperMax; tools::Rectangle aViewInit; TakeTextAnchorRect( aViewInit ); if ( aGeo.nRotationAngle ) { Point aCenter(aViewInit.Center()); aCenter-=aViewInit.TopLeft(); Point aCenter0(aCenter); RotatePoint(aCenter,Point(),aGeo.nSin,aGeo.nCos); aCenter-=aCenter0; aViewInit.Move(aCenter.X(),aCenter.Y()); } Size aAnkSiz(aViewInit.GetSize()); aAnkSiz.AdjustWidth( -1 ); aAnkSiz.AdjustHeight( -1 ); // because GetSize() adds 1 Size aMaxSiz(1000000,1000000); { Size aTmpSiz(getSdrModelFromSdrObject().GetMaxObjSize()); if (aTmpSiz.Width()!=0) aMaxSiz.setWidth(aTmpSiz.Width() ); if (aTmpSiz.Height()!=0) aMaxSiz.setHeight(aTmpSiz.Height() ); } SdrTextHorzAdjust eHAdj(GetTextHorizontalAdjust()); SdrTextVertAdjust eVAdj(GetTextVerticalAdjust()); long nMinWdt = GetMinTextFrameWidth(); long nMinHgt = GetMinTextFrameHeight(); long nMaxWdt = GetMaxTextFrameWidth(); long nMaxHgt = GetMaxTextFrameHeight(); if (nMinWdt<1) nMinWdt=1; if (nMinHgt<1) nMinHgt=1; if ( nMaxWdt == 0 || nMaxWdt > aMaxSiz.Width() ) nMaxWdt = aMaxSiz.Width(); if ( nMaxHgt == 0 || nMaxHgt > aMaxSiz.Height() ) nMaxHgt=aMaxSiz.Height(); if (GetMergedItem(SDRATTR_TEXT_WORDWRAP).GetValue()) { if ( IsVerticalWriting() ) { nMaxHgt = aAnkSiz.Height(); nMinHgt = nMaxHgt; } else { nMaxWdt = aAnkSiz.Width(); nMinWdt = nMaxWdt; } } aPaperMax.setWidth(nMaxWdt ); aPaperMax.setHeight(nMaxHgt ); aPaperMin.setWidth(nMinWdt ); aPaperMin.setHeight(nMinHgt ); if ( pViewMin ) { *pViewMin = aViewInit; long nXFree = aAnkSiz.Width() - aPaperMin.Width(); if ( eHAdj == SDRTEXTHORZADJUST_LEFT ) pViewMin->AdjustRight( -nXFree ); else if ( eHAdj == SDRTEXTHORZADJUST_RIGHT ) pViewMin->AdjustLeft(nXFree ); else { pViewMin->AdjustLeft(nXFree / 2 ); pViewMin->SetRight( pViewMin->Left() + aPaperMin.Width() ); } long nYFree = aAnkSiz.Height() - aPaperMin.Height(); if ( eVAdj == SDRTEXTVERTADJUST_TOP ) pViewMin->AdjustBottom( -nYFree ); else if ( eVAdj == SDRTEXTVERTADJUST_BOTTOM ) pViewMin->AdjustTop(nYFree ); else { pViewMin->AdjustTop(nYFree / 2 ); pViewMin->SetBottom( pViewMin->Top() + aPaperMin.Height() ); } } if( IsVerticalWriting() ) aPaperMin.setWidth( 0 ); else aPaperMin.setHeight( 0 ); if( eHAdj != SDRTEXTHORZADJUST_BLOCK ) aPaperMin.setWidth(0 ); // For complete vertical adjust support, set paper min height to 0, here. if(SDRTEXTVERTADJUST_BLOCK != eVAdj ) aPaperMin.setHeight( 0 ); if (pPaperMin!=nullptr) *pPaperMin=aPaperMin; if (pPaperMax!=nullptr) *pPaperMax=aPaperMax; if (pViewInit!=nullptr) *pViewInit=aViewInit; } void SdrObjCustomShape::EndTextEdit( SdrOutliner& rOutl ) { SdrTextObj::EndTextEdit( rOutl ); InvalidateRenderGeometry(); } void SdrObjCustomShape::TakeTextAnchorRect( tools::Rectangle& rAnchorRect ) const { if ( GetTextBounds( rAnchorRect ) ) { Point aRotateRef( maSnapRect.Center() ); rAnchorRect.AdjustLeft(GetTextLeftDistance() ); rAnchorRect.AdjustTop(GetTextUpperDistance() ); rAnchorRect.AdjustRight( -(GetTextRightDistance()) ); rAnchorRect.AdjustBottom( -(GetTextLowerDistance()) ); ImpJustifyRect( rAnchorRect ); if ( rAnchorRect.GetWidth() < 2 ) rAnchorRect.SetRight( rAnchorRect.Left() + 1 ); // minimal width is 2 if ( rAnchorRect.GetHeight() < 2 ) rAnchorRect.SetBottom( rAnchorRect.Top() + 1 ); // minimal height is 2 if ( aGeo.nRotationAngle ) { Point aP( rAnchorRect.TopLeft() ); RotatePoint( aP, aRotateRef, aGeo.nSin, aGeo. nCos ); rAnchorRect.SetPos( aP ); } } else SdrTextObj::TakeTextAnchorRect( rAnchorRect ); } void SdrObjCustomShape::TakeTextRect( SdrOutliner& rOutliner, tools::Rectangle& rTextRect, bool bNoEditText, tools::Rectangle* pAnchorRect, bool /*bLineWidth*/) const { tools::Rectangle aAnkRect; // Rect in which we anchor TakeTextAnchorRect(aAnkRect); SdrTextVertAdjust eVAdj=GetTextVerticalAdjust(); SdrTextHorzAdjust eHAdj=GetTextHorizontalAdjust(); EEControlBits nStat0=rOutliner.GetControlWord(); Size aNullSize; rOutliner.SetControlWord(nStat0|EEControlBits::AUTOPAGESIZE); rOutliner.SetMinAutoPaperSize(aNullSize); sal_Int32 nMaxAutoPaperWidth = 1000000; sal_Int32 nMaxAutoPaperHeight= 1000000; long nAnkWdt=aAnkRect.GetWidth(); long nAnkHgt=aAnkRect.GetHeight(); if (GetMergedItem(SDRATTR_TEXT_WORDWRAP).GetValue()) { if ( IsVerticalWriting() ) nMaxAutoPaperHeight = nAnkHgt; else nMaxAutoPaperWidth = nAnkWdt; } if(SDRTEXTHORZADJUST_BLOCK == eHAdj && !IsVerticalWriting()) { rOutliner.SetMinAutoPaperSize(Size(nAnkWdt, 0)); } if(SDRTEXTVERTADJUST_BLOCK == eVAdj && IsVerticalWriting()) { rOutliner.SetMinAutoPaperSize(Size(0, nAnkHgt)); } rOutliner.SetMaxAutoPaperSize( Size( nMaxAutoPaperWidth, nMaxAutoPaperHeight ) ); rOutliner.SetPaperSize( aNullSize ); // put text into the Outliner - if necessary the use the text from the EditOutliner OutlinerParaObject* pPara= GetOutlinerParaObject(); if (pEdtOutl && !bNoEditText) pPara=pEdtOutl->CreateParaObject().release(); if (pPara) { bool bHitTest(&getSdrModelFromSdrObject().GetHitTestOutliner() == &rOutliner); const SdrTextObj* pTestObj = rOutliner.GetTextObj(); if( !pTestObj || !bHitTest || pTestObj != this || pTestObj->GetOutlinerParaObject() != GetOutlinerParaObject() ) { if( bHitTest ) rOutliner.SetTextObj( this ); rOutliner.SetUpdateMode(true); rOutliner.SetText(*pPara); } } else { rOutliner.SetTextObj( nullptr ); } if (pEdtOutl && !bNoEditText && pPara) delete pPara; rOutliner.SetUpdateMode(true); rOutliner.SetControlWord(nStat0); SdrText* pText = getActiveText(); if( pText ) pText->CheckPortionInfo( rOutliner ); Point aTextPos(aAnkRect.TopLeft()); Size aTextSiz(rOutliner.GetPaperSize()); // GetPaperSize() has a little added tolerance, no? // For draw objects containing text correct horizontal/vertical alignment if text is bigger // than the object itself. Without that correction, the text would always be // formatted to the left edge (or top edge when vertical) of the draw object. if( !IsTextFrame() ) { if(aAnkRect.GetWidth() < aTextSiz.Width() && !IsVerticalWriting()) { // Horizontal case here. Correct only if eHAdj == SDRTEXTHORZADJUST_BLOCK, // else the alignment is wanted. if(SDRTEXTHORZADJUST_BLOCK == eHAdj) { SvxAdjust eAdjust = GetObjectItemSet().Get(EE_PARA_JUST).GetAdjust(); switch (eAdjust) { case SvxAdjust::Left: eHAdj = SDRTEXTHORZADJUST_LEFT; break; case SvxAdjust::Right: eHAdj = SDRTEXTHORZADJUST_RIGHT; break; case SvxAdjust::Center: eHAdj = SDRTEXTHORZADJUST_CENTER; break; default: break; } } } if(aAnkRect.GetHeight() < aTextSiz.Height() && IsVerticalWriting()) { // Vertical case here. Correct only if eHAdj == SDRTEXTVERTADJUST_BLOCK, // else the alignment is wanted. if(SDRTEXTVERTADJUST_BLOCK == eVAdj) { eVAdj = SDRTEXTVERTADJUST_CENTER; } } } if (eHAdj==SDRTEXTHORZADJUST_CENTER || eHAdj==SDRTEXTHORZADJUST_RIGHT) { long nFreeWdt=aAnkRect.GetWidth()-aTextSiz.Width(); if (eHAdj==SDRTEXTHORZADJUST_CENTER) aTextPos.AdjustX(nFreeWdt/2 ); if (eHAdj==SDRTEXTHORZADJUST_RIGHT) aTextPos.AdjustX(nFreeWdt ); } if (eVAdj==SDRTEXTVERTADJUST_CENTER || eVAdj==SDRTEXTVERTADJUST_BOTTOM) { long nFreeHgt=aAnkRect.GetHeight()-aTextSiz.Height(); if (eVAdj==SDRTEXTVERTADJUST_CENTER) aTextPos.AdjustY(nFreeHgt/2 ); if (eVAdj==SDRTEXTVERTADJUST_BOTTOM) aTextPos.AdjustY(nFreeHgt ); } if (aGeo.nRotationAngle!=0) RotatePoint(aTextPos,aAnkRect.TopLeft(),aGeo.nSin,aGeo.nCos); if (pAnchorRect) *pAnchorRect=aAnkRect; // using rTextRect together with ContourFrame doesn't always work correctly rTextRect=tools::Rectangle(aTextPos,aTextSiz); } void SdrObjCustomShape::NbcSetOutlinerParaObject(std::unique_ptr pTextObject) { SdrTextObj::NbcSetOutlinerParaObject( std::move(pTextObject) ); SetBoundRectDirty(); SetRectsDirty(true); InvalidateRenderGeometry(); } SdrObjCustomShape* SdrObjCustomShape::CloneSdrObject(SdrModel& rTargetModel) const { return CloneHelper< SdrObjCustomShape >(rTargetModel); } SdrObjCustomShape& SdrObjCustomShape::operator=(const SdrObjCustomShape& rObj) { if( this == &rObj ) return *this; SdrTextObj::operator=( rObj ); fObjectRotation = rObj.fObjectRotation; mbAdjustingTextFrameWidthAndHeight = rObj.mbAdjustingTextFrameWidthAndHeight; assert(!mbAdjustingTextFrameWidthAndHeight); InvalidateRenderGeometry(); return *this; } OUString SdrObjCustomShape::TakeObjNameSingul() const { OUStringBuffer sName(SvxResId(STR_ObjNameSingulCUSTOMSHAPE)); OUString aNm(GetName()); if (!aNm.isEmpty()) { sName.append(' '); sName.append('\''); sName.append(aNm); sName.append('\''); } return sName.makeStringAndClear(); } OUString SdrObjCustomShape::TakeObjNamePlural() const { return SvxResId(STR_ObjNamePluralCUSTOMSHAPE); } basegfx::B2DPolyPolygon SdrObjCustomShape::TakeXorPoly() const { return GetLineGeometry( false ); } basegfx::B2DPolyPolygon SdrObjCustomShape::TakeContour() const { const SdrObject* pSdrObject = GetSdrObjectFromCustomShape(); if ( pSdrObject ) return pSdrObject->TakeContour(); return basegfx::B2DPolyPolygon(); } SdrObject* SdrObjCustomShape::DoConvertToPolyObj(bool bBezier, bool bAddText) const { // #i37011# SdrObject* pRetval = nullptr; SdrObject* pRenderedCustomShape = nullptr; if ( !mXRenderedCustomShape.is() ) { // force CustomShape GetSdrObjectFromCustomShape(); } if ( mXRenderedCustomShape.is() ) { pRenderedCustomShape = GetSdrObjectFromXShape( mXRenderedCustomShape ); } if ( pRenderedCustomShape ) { // Clone to same SdrModel SdrObject* pCandidate(pRenderedCustomShape->CloneSdrObject(pRenderedCustomShape->getSdrModelFromSdrObject())); DBG_ASSERT(pCandidate, "SdrObjCustomShape::DoConvertToPolyObj: Could not clone SdrObject (!)"); pRetval = pCandidate->DoConvertToPolyObj(bBezier, bAddText); SdrObject::Free( pCandidate ); if(pRetval) { const bool bShadow(GetMergedItem(SDRATTR_SHADOW).GetValue()); if(bShadow) { pRetval->SetMergedItem(makeSdrShadowItem(true)); } } if(bAddText && HasText() && !IsTextPath()) { pRetval = ImpConvertAddText(pRetval, bBezier); } } return pRetval; } void SdrObjCustomShape::NbcSetStyleSheet( SfxStyleSheet* pNewStyleSheet, bool bDontRemoveHardAttr ) { // #i40944# InvalidateRenderGeometry(); SdrObject::NbcSetStyleSheet( pNewStyleSheet, bDontRemoveHardAttr ); } void SdrObjCustomShape::handlePageChange(SdrPage* pOldPage, SdrPage* pNewPage) { // call parent SdrTextObj::handlePageChange(pOldPage, pNewPage); if(nullptr != pNewPage) { // invalidating rectangles by SetRectsDirty is not sufficient, // AdjustTextFrameWidthAndHeight() also has to be made, both // actions are done by NbcSetSnapRect tools::Rectangle aTmp( maRect ); //creating temporary rectangle #i61108# NbcSetSnapRect( aTmp ); } } SdrObjGeoData* SdrObjCustomShape::NewGeoData() const { return new SdrAShapeObjGeoData; } void SdrObjCustomShape::SaveGeoData(SdrObjGeoData& rGeo) const { SdrTextObj::SaveGeoData( rGeo ); SdrAShapeObjGeoData& rAGeo=static_cast(rGeo); rAGeo.fObjectRotation = fObjectRotation; rAGeo.bMirroredX = IsMirroredX(); rAGeo.bMirroredY = IsMirroredY(); const OUString sAdjustmentValues( "AdjustmentValues" ); const Any* pAny = GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ).GetPropertyValueByName( sAdjustmentValues ); if ( pAny ) *pAny >>= rAGeo.aAdjustmentSeq; } void SdrObjCustomShape::RestGeoData(const SdrObjGeoData& rGeo) { SdrTextObj::RestGeoData( rGeo ); const SdrAShapeObjGeoData& rAGeo=static_cast(rGeo); fObjectRotation = rAGeo.fObjectRotation; SetMirroredX( rAGeo.bMirroredX ); SetMirroredY( rAGeo.bMirroredY ); SdrCustomShapeGeometryItem rGeometryItem = GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ); const OUString sAdjustmentValues( "AdjustmentValues" ); PropertyValue aPropVal; aPropVal.Name = sAdjustmentValues; aPropVal.Value <<= rAGeo.aAdjustmentSeq; rGeometryItem.SetPropertyValue( aPropVal ); SetMergedItem( rGeometryItem ); InvalidateRenderGeometry(); } void SdrObjCustomShape::TRSetBaseGeometry(const basegfx::B2DHomMatrix& rMatrix, const basegfx::B2DPolyPolygon& /*rPolyPolygon*/) { // break up matrix basegfx::B2DTuple aScale; basegfx::B2DTuple aTranslate; double fRotate, fShearX; rMatrix.decompose(aScale, aTranslate, fRotate, fShearX); // #i75086# Old DrawingLayer (GeoStat and geometry) does not support holding negative scalings // in X and Y which equal a 180 degree rotation. Recognize it and react accordingly if(basegfx::fTools::less(aScale.getX(), 0.0) && basegfx::fTools::less(aScale.getY(), 0.0)) { aScale.setX(fabs(aScale.getX())); aScale.setY(fabs(aScale.getY())); fRotate = fmod(fRotate + F_PI, F_2PI); } // reset object shear and rotations fObjectRotation = 0.0; aGeo.nRotationAngle = 0; aGeo.RecalcSinCos(); aGeo.nShearAngle = 0; aGeo.RecalcTan(); // if anchor is used, make position relative to it if(getSdrModelFromSdrObject().IsWriter()) { if(GetAnchorPos().X() || GetAnchorPos().Y()) { aTranslate += basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y()); } } // build and set BaseRect (use scale) Size aSize(FRound(aScale.getX()), FRound(aScale.getY())); // fdo#47434 We need a valid rectangle here if( !aSize.Height() ) aSize.setHeight( 1 ); if( !aSize.Width() ) aSize.setWidth( 1 ); tools::Rectangle aBaseRect(Point(), aSize); SetSnapRect(aBaseRect); // shear? if(!basegfx::fTools::equalZero(fShearX)) { GeoStat aGeoStat; // #i123181# The fix for #121932# here was wrong, the trunk version does not correct the // mirrored shear values, neither at the object level, nor on the API or XML level. Taking // back the mirroring of the shear angle aGeoStat.nShearAngle = FRound((atan(fShearX) / F_PI180) * 100.0); aGeoStat.RecalcTan(); Shear(Point(), aGeoStat.nShearAngle, aGeoStat.nTan, false); } // rotation? if(!basegfx::fTools::equalZero(fRotate)) { GeoStat aGeoStat; // #i78696# // fRotate is mathematically correct, but aGeoStat.nRotationAngle is // mirrored -> mirror value here aGeoStat.nRotationAngle = NormAngle360(FRound(-fRotate / F_PI18000)); aGeoStat.RecalcSinCos(); Rotate(Point(), aGeoStat.nRotationAngle, aGeoStat.nSin, aGeoStat.nCos); } // translate? if(!aTranslate.equalZero()) { Move(Size(FRound(aTranslate.getX()), FRound(aTranslate.getY()))); } } // taking fObjectRotation instead of aGeo.nAngle bool SdrObjCustomShape::TRGetBaseGeometry(basegfx::B2DHomMatrix& rMatrix, basegfx::B2DPolyPolygon& /*rPolyPolygon*/) const { // get turn and shear double fRotate = fObjectRotation * F_PI180; double fShearX = (aGeo.nShearAngle / 100.0) * F_PI180; // get aRect, this is the unrotated snaprect tools::Rectangle aRectangle(maRect); bool bMirroredX = IsMirroredX(); bool bMirroredY = IsMirroredY(); if ( bMirroredX || bMirroredY ) { // we have to retrieve the unmirrored rect GeoStat aNewGeo( aGeo ); if ( bMirroredX ) { tools::Polygon aPol = Rect2Poly(maRect, aNewGeo); tools::Rectangle aBoundRect( aPol.GetBoundRect() ); Point aRef1( ( aBoundRect.Left() + aBoundRect.Right() ) >> 1, aBoundRect.Top() ); Point aRef2( aRef1.X(), aRef1.Y() + 1000 ); sal_uInt16 i; sal_uInt16 nPointCount=aPol.GetSize(); for (i=0; i> 1 ); Point aRef2( aRef1.X() + 1000, aRef1.Y() ); sal_uInt16 i; sal_uInt16 nPointCount=aPol.GetSize(); for (i=0; i SdrObjCustomShape::CreateObjectSpecificViewContact() { return o3tl::make_unique(*this); } // #i33136# bool SdrObjCustomShape::doConstructOrthogonal(const OUString& rName) { bool bRetval(false); if(rName.equalsIgnoreAsciiCase("quadrat")) { bRetval = true; } else if(rName.equalsIgnoreAsciiCase("round-quadrat")) { bRetval = true; } else if(rName.equalsIgnoreAsciiCase("circle")) { bRetval = true; } else if(rName.equalsIgnoreAsciiCase("circle-pie")) { bRetval = true; } else if(rName.equalsIgnoreAsciiCase("ring")) { bRetval = true; } return bRetval; } // #i37011# centralize throw-away of render geometry void SdrObjCustomShape::InvalidateRenderGeometry() { mXRenderedCustomShape = nullptr; SdrObject::Free( mpLastShadowGeometry ); mpLastShadowGeometry = nullptr; } void SdrObjCustomShape::impl_setUnoShape(const uno::Reference& rxUnoShape) { SdrTextObj::impl_setUnoShape(rxUnoShape); // The shape engine is created with _current_ shape. This means we // _must_ reset it when the shape changes. mxCustomShapeEngine.set(nullptr); } OUString SdrObjCustomShape::GetCustomShapeName() { OUString sShapeName; OUString aEngine( GetMergedItem( SDRATTR_CUSTOMSHAPE_ENGINE ).GetValue() ); if ( aEngine.isEmpty() || aEngine == "com.sun.star.drawing.EnhancedCustomShapeEngine" ) { OUString sShapeType; const OUString sType("Type"); const SdrCustomShapeGeometryItem& rGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); const Any* pAny = rGeometryItem.GetPropertyValueByName( sType ); if ( pAny && ( *pAny >>= sShapeType ) ) sShapeName = EnhancedCustomShapeTypeNames::GetAccName( sShapeType ); } return sShapeName; } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */