/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include using namespace ::com::sun::star; SdrObjUserCall::~SdrObjUserCall() { } void SdrObjUserCall::Changed(const SdrObject& /*rObj*/, SdrUserCallType /*eType*/, const tools::Rectangle& /*rOldBoundRect*/) { } SdrObjMacroHitRec::SdrObjMacroHitRec() : pOut(nullptr), pVisiLayer(nullptr), pPageView(nullptr), nTol(0) {} SdrObjUserData::SdrObjUserData(SdrInventor nInv, sal_uInt16 nId) : nInventor(nInv), nIdentifier(nId) {} SdrObjUserData::SdrObjUserData(const SdrObjUserData& rData) : nInventor(rData.nInventor), nIdentifier(rData.nIdentifier) {} SdrObjUserData::~SdrObjUserData() {} SdrObjGeoData::SdrObjGeoData(): pGPL(nullptr), bMovProt(false), bSizProt(false), bNoPrint(false), bClosedObj(false), mbVisible(true), mnLayerID(0) { } SdrObjGeoData::~SdrObjGeoData() { } SdrObjTransformInfoRec::SdrObjTransformInfoRec() : bMoveAllowed(true), bResizeFreeAllowed(true), bResizePropAllowed(true), bRotateFreeAllowed(true), bRotate90Allowed(true), bMirrorFreeAllowed(true), bMirror45Allowed(true), bMirror90Allowed(true), bTransparenceAllowed(true), bShearAllowed(true), bEdgeRadiusAllowed(true), bNoOrthoDesired(true), bNoContortion(true), bCanConvToPath(true), bCanConvToPoly(true), bCanConvToContour(false), bCanConvToPathLineToArea(true), bCanConvToPolyLineToArea(true) {} struct SdrObject::Impl { sdr::ObjectUserVector maObjectUsers; boost::optional mnRelativeWidth; sal_Int16 meRelativeWidthRelation; boost::optional mnRelativeHeight; sal_Int16 meRelativeHeightRelation; Impl() : meRelativeWidthRelation(text::RelOrientation::PAGE_FRAME), meRelativeHeightRelation(text::RelOrientation::PAGE_FRAME) {} }; // BaseProperties section std::unique_ptr SdrObject::CreateObjectSpecificProperties() { return o3tl::make_unique(*this); } sdr::properties::BaseProperties& SdrObject::GetProperties() const { if(!mpProperties) { // CAUTION(!) Do *not* call this during SdrObject construction, // that will lead to wrong type-casts (dependent on constructor-level) // and thus eventually create the wrong sdr::properties (!). Is there // a way to check if on the stack is a SdrObject-constructor (?) const_cast< SdrObject* >(this)->mpProperties = const_cast< SdrObject* >(this)->CreateObjectSpecificProperties(); } return *mpProperties; } // ObjectUser section void SdrObject::AddObjectUser(sdr::ObjectUser& rNewUser) { mpImpl->maObjectUsers.push_back(&rNewUser); } void SdrObject::RemoveObjectUser(sdr::ObjectUser& rOldUser) { const sdr::ObjectUserVector::iterator aFindResult = std::find(mpImpl->maObjectUsers.begin(), mpImpl->maObjectUsers.end(), &rOldUser); if (aFindResult != mpImpl->maObjectUsers.end()) { mpImpl->maObjectUsers.erase(aFindResult); } } // DrawContact section std::unique_ptr SdrObject::CreateObjectSpecificViewContact() { return o3tl::make_unique(*this); } sdr::contact::ViewContact& SdrObject::GetViewContact() const { if(!mpViewContact) { const_cast< SdrObject* >(this)->mpViewContact = const_cast< SdrObject* >(this)->CreateObjectSpecificViewContact(); } return *mpViewContact; } // DrawContact support: Methods for handling Object changes void SdrObject::ActionChanged() const { // Do necessary ViewContact actions GetViewContact().ActionChanged(); } SdrPage* SdrObject::getSdrPageFromSdrObject() const { if(getParentSdrObjListFromSdrObject()) { return getParentSdrObjListFromSdrObject()->getSdrPageFromSdrObjList(); } return nullptr; } SdrModel& SdrObject::getSdrModelFromSdrObject() const { return mrSdrModelFromSdrObject; } void SdrObject::setParentOfSdrObject(SdrObjList* pNewObjList) { if(getParentSdrObjListFromSdrObject() != pNewObjList) { // remember current page SdrPage* pOldPage(getSdrPageFromSdrObject()); // set new parent mpParentOfSdrObject = pNewObjList; // get new page SdrPage* pNewPage(getSdrPageFromSdrObject()); // broadcast page change over objects if needed if(pOldPage != pNewPage) { handlePageChange(pOldPage, pNewPage); } } } SdrObjList* SdrObject::getParentSdrObjListFromSdrObject() const { return mpParentOfSdrObject; } SdrObjList* SdrObject::getChildrenOfSdrObject() const { // default has no children return nullptr; } void SdrObject::SetBoundRectDirty() { aOutRect = tools::Rectangle(); } SdrObject::SdrObject(SdrModel& rSdrModel) : mpFillGeometryDefiningShape(nullptr) ,mrSdrModelFromSdrObject(rSdrModel) ,pUserCall(nullptr) ,pPlusData(nullptr) ,mpImpl(new Impl) ,mpParentOfSdrObject(nullptr) ,nOrdNum(0) ,pGrabBagItem(nullptr) ,mnNavigationPosition(SAL_MAX_UINT32) ,mnLayerID(0) ,mpProperties(nullptr) ,mpViewContact(nullptr) ,mbDelayBroadcastObjectChange(false) ,mbBroadcastObjectChangePending(false) ,mpSvxShape( nullptr ) ,maWeakUnoShape() ,mbDoNotInsertIntoPageAutomatically(false) { bVirtObj =false; bSnapRectDirty =true; bInserted =false; bMovProt =false; bSizProt =false; bNoPrint =false; bEmptyPresObj =false; bNotVisibleAsMaster=false; bClosedObj =false; mbVisible = true; // #i25616# mbLineIsOutsideGeometry = false; // #i25616# mbSupportTextIndentingOnLineWidthChange = false; bNotMasterCachable=false; bIsEdge=false; bIs3DObj=false; bMarkProt=false; bIsUnoObj=false; } SdrObject::~SdrObject() { // tell all the registered ObjectUsers that the page is in destruction sdr::ObjectUserVector aListCopy(mpImpl->maObjectUsers.begin(), mpImpl->maObjectUsers.end()); for(sdr::ObjectUserVector::iterator aIterator = aListCopy.begin(); aIterator != aListCopy.end(); ++aIterator) { sdr::ObjectUser* pObjectUser = *aIterator; DBG_ASSERT(pObjectUser, "SdrObject::~SdrObject: corrupt ObjectUser list (!)"); pObjectUser->ObjectInDestruction(*this); } // Clear the vector. This means that user do not need to call RemoveObjectUser() // when they get called from ObjectInDestruction(). mpImpl->maObjectUsers.clear(); // UserCall SendUserCall(SdrUserCallType::Delete, GetLastBoundRect()); o3tl::reset_preserve_ptr_during(pPlusData); pGrabBagItem.reset(); mpProperties.reset(); mpViewContact.reset(); } void SdrObject::Free( SdrObject*& _rpObject ) { SdrObject* pObject = _rpObject; _rpObject = nullptr; if(nullptr == pObject) { // nothing to do return; } SvxShape* pShape(pObject->getSvxShape()); if(pShape) { if(pShape->HasSdrObjectOwnership()) { // only the SvxShape is allowed to delete me, and will reset // the ownership before doing so return; } else { // not only delete pObject, but also need to dispose uno shape try { pShape->InvalidateSdrObject(); uno::Reference< lang::XComponent > xShapeComp( pObject->getWeakUnoShape(), uno::UNO_QUERY_THROW ); xShapeComp->dispose(); } catch( const uno::Exception& ) { DBG_UNHANDLED_EXCEPTION("svx"); } } } delete pObject; } void SdrObject::SetRectsDirty(bool bNotMyself, bool bRecursive) { if (!bNotMyself) { SetBoundRectDirty(); bSnapRectDirty=true; } if (bRecursive && nullptr != getParentSdrObjListFromSdrObject()) { getParentSdrObjListFromSdrObject()->SetSdrObjListRectsDirty(); } } void SdrObject::handlePageChange(SdrPage* pOldPage, SdrPage* pNewPage) { // The creation of the UNO shape in SdrObject::getUnoShape is influenced // by pPage, so when the page changes we need to discard the cached UNO // shape so that a new one will be created. // If the page is changing to another page with the same model, we // assume they create compatible UNO shape objects so we shouldn't have // to invalidate. // TTTT: This causes quite some problems in SvxDrawPage::add when used // e.g. from Writer - the SdrObject may be cloned to target model, and // the xShape was added to it by purpose (see there). Thus it will be // good to think about if this is really needed - it *seems* to be intended // for a xShape being a on-demand-creatable resource - with the argument that // the SdrPage/UnoPage used influences the SvxShape creation. This uses // resources and would be nice to get rid of anyways. if(nullptr == pOldPage || nullptr == pNewPage) { SvxShape* const pShape(getSvxShape()); if (pShape && !pShape->HasSdrObjectOwnership()) { setUnoShape(nullptr); } } } // init global static itempool SdrItemPool* SdrObject::mpGlobalItemPool = nullptr; SdrItemPool& SdrObject::GetGlobalDrawObjectItemPool() { if(!mpGlobalItemPool) { mpGlobalItemPool = new SdrItemPool(); SfxItemPool* pGlobalOutlPool = EditEngine::CreatePool(); mpGlobalItemPool->SetSecondaryPool(pGlobalOutlPool); mpGlobalItemPool->SetDefaultMetric(SdrEngineDefaults::GetMapUnit()); mpGlobalItemPool->FreezeIdRanges(); } return *mpGlobalItemPool; } void SdrObject::SetRelativeWidth( double nValue ) { mpImpl->mnRelativeWidth.reset( nValue ); } void SdrObject::SetRelativeWidthRelation( sal_Int16 eValue ) { mpImpl->meRelativeWidthRelation = eValue; } void SdrObject::SetRelativeHeight( double nValue ) { mpImpl->mnRelativeHeight.reset( nValue ); } void SdrObject::SetRelativeHeightRelation( sal_Int16 eValue ) { mpImpl->meRelativeHeightRelation = eValue; } const double* SdrObject::GetRelativeWidth( ) const { if (!mpImpl->mnRelativeWidth) return nullptr; return &mpImpl->mnRelativeWidth.get(); } sal_Int16 SdrObject::GetRelativeWidthRelation() const { return mpImpl->meRelativeWidthRelation; } const double* SdrObject::GetRelativeHeight( ) const { if (!mpImpl->mnRelativeHeight) return nullptr; return &mpImpl->mnRelativeHeight.get(); } sal_Int16 SdrObject::GetRelativeHeightRelation() const { return mpImpl->meRelativeHeightRelation; } SfxItemPool& SdrObject::GetObjectItemPool() const { return getSdrModelFromSdrObject().GetItemPool(); } SdrInventor SdrObject::GetObjInventor() const { return SdrInventor::Default; } sal_uInt16 SdrObject::GetObjIdentifier() const { return sal_uInt16(OBJ_NONE); } void SdrObject::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const { rInfo.bRotateFreeAllowed=false; rInfo.bMirrorFreeAllowed=false; rInfo.bTransparenceAllowed = false; rInfo.bShearAllowed =false; rInfo.bEdgeRadiusAllowed=false; rInfo.bCanConvToPath =false; rInfo.bCanConvToPoly =false; rInfo.bCanConvToContour = false; rInfo.bCanConvToPathLineToArea=false; rInfo.bCanConvToPolyLineToArea=false; } SdrLayerID SdrObject::GetLayer() const { return mnLayerID; } void SdrObject::getMergedHierarchySdrLayerIDSet(SdrLayerIDSet& rSet) const { rSet.Set(GetLayer()); SdrObjList* pOL=GetSubList(); if (pOL!=nullptr) { const size_t nObjCount = pOL->GetObjCount(); for (size_t nObjNum = 0; nObjNumGetObj(nObjNum)->getMergedHierarchySdrLayerIDSet(rSet); } } } void SdrObject::NbcSetLayer(SdrLayerID nLayer) { mnLayerID = nLayer; } void SdrObject::SetLayer(SdrLayerID nLayer) { NbcSetLayer(nLayer); SetChanged(); BroadcastObjectChange(); } void SdrObject::AddListener(SfxListener& rListener) { ImpForcePlusData(); if (pPlusData->pBroadcast==nullptr) pPlusData->pBroadcast.reset(new SfxBroadcaster); // SdrEdgeObj may be connected to same SdrObject on both ends so allow it // to listen twice SdrEdgeObj const*const pEdge(dynamic_cast(&rListener)); rListener.StartListening(*pPlusData->pBroadcast, pEdge ? DuplicateHandling::Allow : DuplicateHandling::Unexpected); } void SdrObject::RemoveListener(SfxListener& rListener) { if (pPlusData!=nullptr && pPlusData->pBroadcast!=nullptr) { rListener.EndListening(*pPlusData->pBroadcast); if (!pPlusData->pBroadcast->HasListeners()) { pPlusData->pBroadcast.reset(); } } } const SfxBroadcaster* SdrObject::GetBroadcaster() const { return pPlusData!=nullptr ? pPlusData->pBroadcast.get() : nullptr; } void SdrObject::AddReference(SdrVirtObj& rVrtObj) { AddListener(rVrtObj); } void SdrObject::DelReference(SdrVirtObj& rVrtObj) { RemoveListener(rVrtObj); } bool SdrObject::IsGroupObject() const { return GetSubList()!=nullptr; } SdrObjList* SdrObject::GetSubList() const { return nullptr; } SdrObject* SdrObject::getParentSdrObjectFromSdrObject() const { SdrObjList* pParent(getParentSdrObjListFromSdrObject()); if(nullptr == pParent) { return nullptr; } return pParent->getSdrObjectFromSdrObjList(); } void SdrObject::SetName(const OUString& rStr) { if (!rStr.isEmpty() && !pPlusData) { ImpForcePlusData(); } if(pPlusData && pPlusData->aObjName != rStr) { // Undo/Redo for setting object's name (#i73249#) bool bUndo( false ); if ( getSdrModelFromSdrObject().IsUndoEnabled() ) { bUndo = true; SdrUndoAction* pUndoAction = SdrUndoFactory::CreateUndoObjectStrAttr( *this, SdrUndoObjStrAttr::ObjStrAttrType::Name, GetName(), rStr ); getSdrModelFromSdrObject().BegUndo( pUndoAction->GetComment() ); getSdrModelFromSdrObject().AddUndo( pUndoAction ); } pPlusData->aObjName = rStr; // Undo/Redo for setting object's name (#i73249#) if ( bUndo ) { getSdrModelFromSdrObject().EndUndo(); } SetChanged(); BroadcastObjectChange(); } } OUString SdrObject::GetName() const { if(pPlusData) { return pPlusData->aObjName; } return OUString(); } void SdrObject::SetTitle(const OUString& rStr) { if (!rStr.isEmpty() && !pPlusData) { ImpForcePlusData(); } if(pPlusData && pPlusData->aObjTitle != rStr) { // Undo/Redo for setting object's title (#i73249#) bool bUndo( false ); if ( getSdrModelFromSdrObject().IsUndoEnabled() ) { bUndo = true; SdrUndoAction* pUndoAction = SdrUndoFactory::CreateUndoObjectStrAttr( *this, SdrUndoObjStrAttr::ObjStrAttrType::Title, GetTitle(), rStr ); getSdrModelFromSdrObject().BegUndo( pUndoAction->GetComment() ); getSdrModelFromSdrObject().AddUndo( pUndoAction ); } pPlusData->aObjTitle = rStr; // Undo/Redo for setting object's title (#i73249#) if ( bUndo ) { getSdrModelFromSdrObject().EndUndo(); } SetChanged(); BroadcastObjectChange(); } } OUString SdrObject::GetTitle() const { if(pPlusData) { return pPlusData->aObjTitle; } return OUString(); } void SdrObject::SetDescription(const OUString& rStr) { if (!rStr.isEmpty() && !pPlusData) { ImpForcePlusData(); } if(pPlusData && pPlusData->aObjDescription != rStr) { // Undo/Redo for setting object's description (#i73249#) bool bUndo( false ); if ( getSdrModelFromSdrObject().IsUndoEnabled() ) { bUndo = true; SdrUndoAction* pUndoAction = SdrUndoFactory::CreateUndoObjectStrAttr( *this, SdrUndoObjStrAttr::ObjStrAttrType::Description, GetDescription(), rStr ); getSdrModelFromSdrObject().BegUndo( pUndoAction->GetComment() ); getSdrModelFromSdrObject().AddUndo( pUndoAction ); } pPlusData->aObjDescription = rStr; // Undo/Redo for setting object's description (#i73249#) if ( bUndo ) { getSdrModelFromSdrObject().EndUndo(); } SetChanged(); BroadcastObjectChange(); } } OUString SdrObject::GetDescription() const { if(pPlusData) { return pPlusData->aObjDescription; } return OUString(); } sal_uInt32 SdrObject::GetOrdNum() const { if (nullptr != getParentSdrObjListFromSdrObject()) { if (getParentSdrObjListFromSdrObject()->IsObjOrdNumsDirty()) { getParentSdrObjListFromSdrObject()->RecalcObjOrdNums(); } } else const_cast(this)->nOrdNum=0; return nOrdNum; } void SdrObject::SetOrdNum(sal_uInt32 nNum) { nOrdNum = nNum; } void SdrObject::GetGrabBagItem(css::uno::Any& rVal) const { if (pGrabBagItem != nullptr) pGrabBagItem->QueryValue(rVal); else rVal <<= uno::Sequence(); } void SdrObject::SetGrabBagItem(const css::uno::Any& rVal) { if (pGrabBagItem == nullptr) pGrabBagItem.reset(new SfxGrabBagItem); pGrabBagItem->PutValue(rVal, 0); SetChanged(); BroadcastObjectChange(); } sal_uInt32 SdrObject::GetNavigationPosition() { if (nullptr != getParentSdrObjListFromSdrObject() && getParentSdrObjListFromSdrObject()->RecalcNavigationPositions()) { return mnNavigationPosition; } else return GetOrdNum(); } void SdrObject::SetNavigationPosition (const sal_uInt32 nNewPosition) { mnNavigationPosition = nNewPosition; } // To make clearer that this method may trigger RecalcBoundRect and thus may be // expensive and sometimes problematic (inside a bigger object change you will get // non-useful BoundRects sometimes) I rename that method from GetBoundRect() to // GetCurrentBoundRect(). const tools::Rectangle& SdrObject::GetCurrentBoundRect() const { if(aOutRect.IsEmpty()) { const_cast< SdrObject* >(this)->RecalcBoundRect(); } return aOutRect; } // To have a possibility to get the last calculated BoundRect e.g for producing // the first rectangle for repaints (old and new need to be used) without forcing // a RecalcBoundRect (which may be problematical and expensive sometimes) I add here // a new method for accessing the last BoundRect. const tools::Rectangle& SdrObject::GetLastBoundRect() const { return aOutRect; } void SdrObject::RecalcBoundRect() { // #i101680# suppress BoundRect calculations on import(s) if ((getSdrModelFromSdrObject().isLocked()) || utl::ConfigManager::IsFuzzing()) return; // central new method which will calculate the BoundRect using primitive geometry if(aOutRect.IsEmpty()) { const drawinglayer::primitive2d::Primitive2DContainer xPrimitives(GetViewContact().getViewIndependentPrimitive2DContainer()); if(!xPrimitives.empty()) { // use neutral ViewInformation and get the range of the primitives const drawinglayer::geometry::ViewInformation2D aViewInformation2D; const basegfx::B2DRange aRange(xPrimitives.getB2DRange(aViewInformation2D)); if(!aRange.isEmpty()) { aOutRect = tools::Rectangle( static_cast(floor(aRange.getMinX())), static_cast(floor(aRange.getMinY())), static_cast(ceil(aRange.getMaxX())), static_cast(ceil(aRange.getMaxY()))); aOutRect -= GetGridOffset(); // don't include grid offset return; } } } } void SdrObject::BroadcastObjectChange() const { if ((getSdrModelFromSdrObject().isLocked()) || utl::ConfigManager::IsFuzzing()) return; if (mbDelayBroadcastObjectChange) { mbBroadcastObjectChangePending = true; return; } bool bPlusDataBroadcast(pPlusData && pPlusData->pBroadcast); bool bObjectChange(IsInserted()); if(bPlusDataBroadcast || bObjectChange) { SdrHint aHint(SdrHintKind::ObjectChange, *this); if(bPlusDataBroadcast) { pPlusData->pBroadcast->Broadcast(aHint); } if(bObjectChange) { getSdrModelFromSdrObject().Broadcast(aHint); } } } void SdrObject::SetChanged() { // For testing purposes, use the new ViewContact for change // notification now. ActionChanged(); // TTTT Need to check meaning/usage of IsInserted in one // of the next changes. It should not mean to have a SdrModel // set (this is guaranteed now), but should be connected to // being added to a SdrPage (?) if(IsInserted()) { getSdrModelFromSdrObject().SetChanged(); } } // tooling for painting a single object to an OutputDevice. void SdrObject::SingleObjectPainter(OutputDevice& rOut) const { sdr::contact::SdrObjectVector aObjectVector; aObjectVector.push_back(const_cast< SdrObject* >(this)); sdr::contact::ObjectContactOfObjListPainter aPainter(rOut, aObjectVector, getSdrPageFromSdrObject()); sdr::contact::DisplayInfo aDisplayInfo; aPainter.ProcessDisplay(aDisplayInfo); } bool SdrObject::LineGeometryUsageIsNecessary() const { drawing::LineStyle eXLS = GetMergedItem(XATTR_LINESTYLE).GetValue(); return (eXLS != drawing::LineStyle_NONE); } bool SdrObject::HasLimitedRotation() const { // RotGrfFlyFrame: Default is false, support full rotation return false; } SdrObject* SdrObject::CloneSdrObject(SdrModel& rTargetModel) const { return CloneHelper< SdrObject >(rTargetModel); } SdrObject& SdrObject::operator=(const SdrObject& rObj) { if( this == &rObj ) return *this; mpProperties.reset(); mpViewContact.reset(); // The CloneSdrObject() method uses the local copy constructor from the individual // sdr::properties::BaseProperties class. Since the target class maybe for another // draw object, an SdrObject needs to be provided, as in the normal constructor. mpProperties = rObj.GetProperties().Clone(*this); aOutRect=rObj.aOutRect; mnLayerID = rObj.mnLayerID; aAnchor =rObj.aAnchor; bVirtObj=rObj.bVirtObj; bSizProt=rObj.bSizProt; bMovProt=rObj.bMovProt; bNoPrint=rObj.bNoPrint; mbVisible=rObj.mbVisible; bMarkProt=rObj.bMarkProt; bEmptyPresObj =rObj.bEmptyPresObj; bNotVisibleAsMaster=rObj.bNotVisibleAsMaster; bSnapRectDirty=true; bNotMasterCachable=rObj.bNotMasterCachable; pPlusData.reset(); if (rObj.pPlusData!=nullptr) { pPlusData.reset(rObj.pPlusData->Clone(this)); } if (pPlusData!=nullptr && pPlusData->pBroadcast!=nullptr) { pPlusData->pBroadcast.reset(); // broadcaster isn't copied } pGrabBagItem.reset(); if (rObj.pGrabBagItem!=nullptr) pGrabBagItem.reset(static_cast< SfxGrabBagItem* >( rObj.pGrabBagItem->Clone() )); aGridOffset = rObj.aGridOffset; return *this; } OUString SdrObject::TakeObjNameSingul() const { OUStringBuffer sName(SvxResId(STR_ObjNameSingulNONE)); OUString aName(GetName()); if (!aName.isEmpty()) { sName.append(' '); sName.append('\''); sName.append(aName); sName.append('\''); } return sName.makeStringAndClear(); } OUString SdrObject::TakeObjNamePlural() const { return SvxResId(STR_ObjNamePluralNONE); } void SdrObject::ImpTakeDescriptionStr(const char* pStrCacheID, OUString& rStr) const { rStr = SvxResId(pStrCacheID); sal_Int32 nPos = rStr.indexOf("%1"); if (nPos >= 0) { // Replace '%1' with the object name. OUString aObjName(TakeObjNameSingul()); rStr = rStr.replaceAt(nPos, 2, aObjName); } nPos = rStr.indexOf("%2"); if (nPos >= 0) // Replace '%2' with the passed value. rStr = rStr.replaceAt(nPos, 2, "0"); } void SdrObject::ImpForcePlusData() { if (!pPlusData) pPlusData.reset( new SdrObjPlusData ); } OUString SdrObject::GetMetrStr(long nVal) const { return getSdrModelFromSdrObject().GetMetricString(nVal); } basegfx::B2DPolyPolygon SdrObject::TakeXorPoly() const { basegfx::B2DPolyPolygon aRetval; const tools::Rectangle aR(GetCurrentBoundRect()); const basegfx::B2DRange aRange(aR.Left(), aR.Top(), aR.Right(), aR.Bottom()); aRetval.append(basegfx::utils::createPolygonFromRect(aRange)); return aRetval; } basegfx::B2DPolyPolygon SdrObject::TakeContour() const { basegfx::B2DPolyPolygon aRetval; // create cloned object without text, but with drawing::LineStyle_SOLID, // COL_BLACK as line color and drawing::FillStyle_NONE SdrObject* pClone(CloneSdrObject(getSdrModelFromSdrObject())); if(pClone) { const SdrTextObj* pTextObj = dynamic_cast< const SdrTextObj* >(this); if(pTextObj) { // no text and no text animation pClone->SetMergedItem(SdrTextAniKindItem(SdrTextAniKind::NONE)); pClone->SetOutlinerParaObject(nullptr); } const SdrEdgeObj* pEdgeObj = dynamic_cast< const SdrEdgeObj* >(this); if(pEdgeObj) { // create connections if connector, will be cleaned up when // deleting the connector again SdrObject* pLeft = pEdgeObj->GetConnectedNode(true); SdrObject* pRight = pEdgeObj->GetConnectedNode(false); if(pLeft) { pClone->ConnectToNode(true, pLeft); } if(pRight) { pClone->ConnectToNode(false, pRight); } } SfxItemSet aNewSet(GetObjectItemPool()); // #i101980# ignore LineWidth; that's what the old implementation // did. With line width, the result may be huge due to fat/thick // line decompositions aNewSet.Put(XLineWidthItem(0)); // solid black lines and no fill aNewSet.Put(XLineStyleItem(drawing::LineStyle_SOLID)); aNewSet.Put(XLineColorItem(OUString(), COL_BLACK)); aNewSet.Put(XFillStyleItem(drawing::FillStyle_NONE)); pClone->SetMergedItemSet(aNewSet); // get sequence from clone const sdr::contact::ViewContact& rVC(pClone->GetViewContact()); const drawinglayer::primitive2d::Primitive2DContainer xSequence(rVC.getViewIndependentPrimitive2DContainer()); if(!xSequence.empty()) { // use neutral ViewInformation const drawinglayer::geometry::ViewInformation2D aViewInformation2D; // create extractor, process and get result (with hairlines as opened polygons) drawinglayer::processor2d::ContourExtractor2D aExtractor(aViewInformation2D, false); aExtractor.process(xSequence); const basegfx::B2DPolyPolygonVector& rResult(aExtractor.getExtractedContour()); const sal_uInt32 nSize(rResult.size()); // when count is one, it is implied that the object has only its normal // contour anyways and TakeContour() is to return an empty PolyPolygon // (see old implementation for historical reasons) if(nSize > 1) { // the topology for contour is correctly a vector of PolyPolygons; for // historical reasons cut it back to a single tools::PolyPolygon here for(sal_uInt32 a(0); a < nSize; a++) { aRetval.append(rResult[a]); } } } // Always use SdrObject::Free to delete SdrObjects (!) SdrObject::Free(pClone); } return aRetval; } sal_uInt32 SdrObject::GetHdlCount() const { return 8L; } SdrHdl* SdrObject::GetHdl(sal_uInt32 nHdlNum) const { SdrHdl* pH=nullptr; const tools::Rectangle& rR=GetSnapRect(); switch (nHdlNum) { case 0: pH=new SdrHdl(rR.TopLeft(), SdrHdlKind::UpperLeft); break; case 1: pH=new SdrHdl(rR.TopCenter(), SdrHdlKind::Upper); break; case 2: pH=new SdrHdl(rR.TopRight(), SdrHdlKind::UpperRight); break; case 3: pH=new SdrHdl(rR.LeftCenter(), SdrHdlKind::Left ); break; case 4: pH=new SdrHdl(rR.RightCenter(), SdrHdlKind::Right); break; case 5: pH=new SdrHdl(rR.BottomLeft(), SdrHdlKind::LowerLeft); break; case 6: pH=new SdrHdl(rR.BottomCenter(),SdrHdlKind::Lower); break; case 7: pH=new SdrHdl(rR.BottomRight(), SdrHdlKind::LowerRight); break; } return pH; } sal_uInt32 SdrObject::GetPlusHdlCount(const SdrHdl& /*rHdl*/) const { return 0L; } SdrHdl* SdrObject::GetPlusHdl(const SdrHdl& /*rHdl*/, sal_uInt32 /*nPlNum*/) const { return nullptr; } void SdrObject::AddToHdlList(SdrHdlList& rHdlList) const { sal_uInt32 nCount=GetHdlCount(); for (sal_uInt32 i=0; iGetKind(); bool bEcke=(eHdl==SdrHdlKind::UpperLeft || eHdl==SdrHdlKind::UpperRight || eHdl==SdrHdlKind::LowerLeft || eHdl==SdrHdlKind::LowerRight); bool bOrtho=rDrag.GetView()!=nullptr && rDrag.GetView()->IsOrtho(); bool bBigOrtho=bEcke && bOrtho && rDrag.GetView()->IsBigOrtho(); Point aPos(rDrag.GetNow()); bool bLft=(eHdl==SdrHdlKind::UpperLeft || eHdl==SdrHdlKind::Left || eHdl==SdrHdlKind::LowerLeft); bool bRgt=(eHdl==SdrHdlKind::UpperRight || eHdl==SdrHdlKind::Right || eHdl==SdrHdlKind::LowerRight); bool bTop=(eHdl==SdrHdlKind::UpperRight || eHdl==SdrHdlKind::Upper || eHdl==SdrHdlKind::UpperLeft); bool bBtm=(eHdl==SdrHdlKind::LowerRight || eHdl==SdrHdlKind::Lower || eHdl==SdrHdlKind::LowerLeft); if (bLft) aTmpRect.SetLeft(aPos.X() ); if (bRgt) aTmpRect.SetRight(aPos.X() ); if (bTop) aTmpRect.SetTop(aPos.Y() ); if (bBtm) aTmpRect.SetBottom(aPos.Y() ); if (bOrtho) { // Ortho long nWdt0=aRect.Right() -aRect.Left(); long nHgt0=aRect.Bottom()-aRect.Top(); long nXMul=aTmpRect.Right() -aTmpRect.Left(); long nYMul=aTmpRect.Bottom()-aTmpRect.Top(); long nXDiv=nWdt0; long nYDiv=nHgt0; bool bXNeg=(nXMul<0)!=(nXDiv<0); bool bYNeg=(nYMul<0)!=(nYDiv<0); nXMul=std::abs(nXMul); nYMul=std::abs(nYMul); nXDiv=std::abs(nXDiv); nYDiv=std::abs(nYDiv); Fraction aXFact(nXMul,nXDiv); // fractions for canceling Fraction aYFact(nYMul,nYDiv); // and for comparing nXMul=aXFact.GetNumerator(); nYMul=aYFact.GetNumerator(); nXDiv=aXFact.GetDenominator(); nYDiv=aYFact.GetDenominator(); if (bEcke) { // corner point handles bool bUseX=(aXFactGetKind(); return eHdl==SdrHdlKind::UpperLeft || eHdl==SdrHdlKind::Upper || eHdl==SdrHdlKind::UpperRight || eHdl==SdrHdlKind::Left || eHdl==SdrHdlKind::Right || eHdl==SdrHdlKind::LowerLeft || eHdl==SdrHdlKind::Lower || eHdl==SdrHdlKind::LowerRight; } bool SdrObject::applySpecialDrag(SdrDragStat& rDrag) { tools::Rectangle aNewRect(ImpDragCalcRect(rDrag)); if(aNewRect != GetSnapRect()) { NbcSetSnapRect(aNewRect); } return true; } OUString SdrObject::getSpecialDragComment(const SdrDragStat& /*rDrag*/) const { return OUString(); } basegfx::B2DPolyPolygon SdrObject::getSpecialDragPoly(const SdrDragStat& /*rDrag*/) const { // default has nothing to add return basegfx::B2DPolyPolygon(); } // Create bool SdrObject::BegCreate(SdrDragStat& rStat) { rStat.SetOrtho4Possible(); tools::Rectangle aRect1(rStat.GetStart(), rStat.GetNow()); aRect1.Justify(); rStat.SetActionRect(aRect1); aOutRect = aRect1; return true; } bool SdrObject::MovCreate(SdrDragStat& rStat) { rStat.TakeCreateRect(aOutRect); rStat.SetActionRect(aOutRect); aOutRect.Justify(); return true; } bool SdrObject::EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd) { rStat.TakeCreateRect(aOutRect); aOutRect.Justify(); return (eCmd==SdrCreateCmd::ForceEnd || rStat.GetPointCount()>=2); } void SdrObject::BrkCreate(SdrDragStat& /*rStat*/) { } bool SdrObject::BckCreate(SdrDragStat& /*rStat*/) { return false; } basegfx::B2DPolyPolygon SdrObject::TakeCreatePoly(const SdrDragStat& rDrag) const { tools::Rectangle aRect1; rDrag.TakeCreateRect(aRect1); aRect1.Justify(); basegfx::B2DPolyPolygon aRetval; const basegfx::B2DRange aRange(aRect1.Left(), aRect1.Top(), aRect1.Right(), aRect1.Bottom()); aRetval.append(basegfx::utils::createPolygonFromRect(aRange)); return aRetval; } Pointer SdrObject::GetCreatePointer() const { return Pointer(PointerStyle::Cross); } // transformations void SdrObject::NbcMove(const Size& rSiz) { aOutRect.Move(rSiz); SetRectsDirty(); } void SdrObject::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact) { bool bXMirr=(xFact.GetNumerator()<0) != (xFact.GetDenominator()<0); bool bYMirr=(yFact.GetNumerator()<0) != (yFact.GetDenominator()<0); if (bXMirr || bYMirr) { Point aRef1(GetSnapRect().Center()); if (bXMirr) { Point aRef2(aRef1); aRef2.AdjustY( 1 ); NbcMirrorGluePoints(aRef1,aRef2); } if (bYMirr) { Point aRef2(aRef1); aRef2.AdjustX( 1 ); NbcMirrorGluePoints(aRef1,aRef2); } } ResizeRect(aOutRect,rRef,xFact,yFact); SetRectsDirty(); } void SdrObject::NbcRotate(const Point& rRef, long nAngle, double sn, double cs) { SetGlueReallyAbsolute(true); aOutRect.Move(-rRef.X(),-rRef.Y()); tools::Rectangle R(aOutRect); if (sn==1.0 && cs==0.0) { // 90deg aOutRect.SetLeft(-R.Bottom() ); aOutRect.SetRight(-R.Top() ); aOutRect.SetTop(R.Left() ); aOutRect.SetBottom(R.Right() ); } else if (sn==0.0 && cs==-1.0) { // 180deg aOutRect.SetLeft(-R.Right() ); aOutRect.SetRight(-R.Left() ); aOutRect.SetTop(-R.Bottom() ); aOutRect.SetBottom(-R.Top() ); } else if (sn==-1.0 && cs==0.0) { // 270deg aOutRect.SetLeft(R.Top() ); aOutRect.SetRight(R.Bottom() ); aOutRect.SetTop(-R.Right() ); aOutRect.SetBottom(-R.Left() ); } aOutRect.Move(rRef.X(),rRef.Y()); aOutRect.Justify(); // just in case SetRectsDirty(); NbcRotateGluePoints(rRef,nAngle,sn,cs); SetGlueReallyAbsolute(false); } void SdrObject::NbcMirror(const Point& rRef1, const Point& rRef2) { SetGlueReallyAbsolute(true); aOutRect.Move(-rRef1.X(),-rRef1.Y()); tools::Rectangle R(aOutRect); long dx=rRef2.X()-rRef1.X(); long dy=rRef2.Y()-rRef1.Y(); if (dx==0) { // vertical axis aOutRect.SetLeft(-R.Right() ); aOutRect.SetRight(-R.Left() ); } else if (dy==0) { // horizontal axis aOutRect.SetTop(-R.Bottom() ); aOutRect.SetBottom(-R.Top() ); } else if (dx==dy) { // 45deg axis aOutRect.SetLeft(R.Top() ); aOutRect.SetRight(R.Bottom() ); aOutRect.SetTop(R.Left() ); aOutRect.SetBottom(R.Right() ); } else if (dx==-dy) { // 45deg axis aOutRect.SetLeft(-R.Bottom() ); aOutRect.SetRight(-R.Top() ); aOutRect.SetTop(-R.Right() ); aOutRect.SetBottom(-R.Left() ); } aOutRect.Move(rRef1.X(),rRef1.Y()); aOutRect.Justify(); // just in case SetRectsDirty(); NbcMirrorGluePoints(rRef1,rRef2); SetGlueReallyAbsolute(false); } void SdrObject::NbcShear(const Point& rRef, long /*nAngle*/, double tn, bool bVShear) { SetGlueReallyAbsolute(true); NbcShearGluePoints(rRef,tn,bVShear); SetGlueReallyAbsolute(false); } void SdrObject::Move(const Size& rSiz) { if (rSiz.Width()!=0 || rSiz.Height()!=0) { tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); NbcMove(rSiz); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::MoveOnly,aBoundRect0); } } void SdrObject::NbcCrop(const basegfx::B2DPoint& /*aRef*/, double /*fxFact*/, double /*fyFact*/) { // Default: does nothing. Real behaviour in SwVirtFlyDrawObj and SdrDragCrop::EndSdrDrag. // Where SwVirtFlyDrawObj is the only real user of it to do something local } void SdrObject::Resize(const Point& rRef, const Fraction& xFact, const Fraction& yFact, bool bUnsetRelative) { if (xFact.GetNumerator()!=xFact.GetDenominator() || yFact.GetNumerator()!=yFact.GetDenominator()) { if (bUnsetRelative) { mpImpl->mnRelativeWidth.reset(); mpImpl->meRelativeWidthRelation = text::RelOrientation::PAGE_FRAME; mpImpl->meRelativeHeightRelation = text::RelOrientation::PAGE_FRAME; mpImpl->mnRelativeHeight.reset(); } tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); NbcResize(rRef,xFact,yFact); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::Resize,aBoundRect0); } } void SdrObject::Crop(const basegfx::B2DPoint& rRef, double fxFact, double fyFact) { tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); NbcCrop(rRef, fxFact, fyFact); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::Resize,aBoundRect0); } void SdrObject::Rotate(const Point& rRef, long nAngle, double sn, double cs) { if (nAngle!=0) { tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); NbcRotate(rRef,nAngle,sn,cs); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::Resize,aBoundRect0); } } void SdrObject::Mirror(const Point& rRef1, const Point& rRef2) { tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); NbcMirror(rRef1,rRef2); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::Resize,aBoundRect0); } void SdrObject::Shear(const Point& rRef, long nAngle, double tn, bool bVShear) { if (nAngle!=0) { tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); NbcShear(rRef,nAngle,tn,bVShear); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::Resize,aBoundRect0); } } void SdrObject::NbcSetRelativePos(const Point& rPnt) { Point aRelPos0(GetSnapRect().TopLeft()-aAnchor); Size aSiz(rPnt.X()-aRelPos0.X(),rPnt.Y()-aRelPos0.Y()); NbcMove(aSiz); // This also calls SetRectsDirty() } void SdrObject::SetRelativePos(const Point& rPnt) { if (rPnt!=GetRelativePos()) { tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); NbcSetRelativePos(rPnt); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::MoveOnly,aBoundRect0); } } Point SdrObject::GetRelativePos() const { return GetSnapRect().TopLeft()-aAnchor; } void SdrObject::ImpSetAnchorPos(const Point& rPnt) { aAnchor = rPnt; } void SdrObject::NbcSetAnchorPos(const Point& rPnt) { Size aSiz(rPnt.X()-aAnchor.X(),rPnt.Y()-aAnchor.Y()); aAnchor=rPnt; NbcMove(aSiz); // This also calls SetRectsDirty() } void SdrObject::SetAnchorPos(const Point& rPnt) { if (rPnt!=aAnchor) { tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); NbcSetAnchorPos(rPnt); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::MoveOnly,aBoundRect0); } } const Point& SdrObject::GetAnchorPos() const { return aAnchor; } void SdrObject::RecalcSnapRect() { } const tools::Rectangle& SdrObject::GetSnapRect() const { return aOutRect; } void SdrObject::NbcSetSnapRect(const tools::Rectangle& rRect) { aOutRect=rRect; } const tools::Rectangle& SdrObject::GetLogicRect() const { return GetSnapRect(); } void SdrObject::NbcSetLogicRect(const tools::Rectangle& rRect) { NbcSetSnapRect(rRect); } void SdrObject::AdjustToMaxRect( const tools::Rectangle& rMaxRect, bool /* bShrinkOnly = false */ ) { SetLogicRect( rMaxRect ); } void SdrObject::SetSnapRect(const tools::Rectangle& rRect) { tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); NbcSetSnapRect(rRect); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::Resize,aBoundRect0); } void SdrObject::SetLogicRect(const tools::Rectangle& rRect) { tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); NbcSetLogicRect(rRect); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::Resize,aBoundRect0); } long SdrObject::GetRotateAngle() const { return 0; } long SdrObject::GetShearAngle(bool /*bVertical*/) const { return 0; } sal_uInt32 SdrObject::GetSnapPointCount() const { return GetPointCount(); } Point SdrObject::GetSnapPoint(sal_uInt32 i) const { return GetPoint(i); } bool SdrObject::IsPolyObj() const { return false; } sal_uInt32 SdrObject::GetPointCount() const { return 0L; } Point SdrObject::GetPoint(sal_uInt32 /*i*/) const { return Point(); } void SdrObject::SetPoint(const Point& rPnt, sal_uInt32 i) { tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); NbcSetPoint(rPnt, i); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::Resize,aBoundRect0); } void SdrObject::NbcSetPoint(const Point& /*rPnt*/, sal_uInt32 /*i*/) { } bool SdrObject::HasTextEdit() const { return false; } bool SdrObject::Equals(const SdrObject& rOtherObj) const { return (aAnchor.X() == rOtherObj.aAnchor.X() && aAnchor.Y() == rOtherObj.aAnchor.Y() && aGridOffset.X() == rOtherObj.aGridOffset.X() && aGridOffset.Y() == rOtherObj.aGridOffset.Y() && nOrdNum == rOtherObj.nOrdNum && mnNavigationPosition == rOtherObj.mnNavigationPosition && mbSupportTextIndentingOnLineWidthChange == rOtherObj.mbSupportTextIndentingOnLineWidthChange && mbLineIsOutsideGeometry == rOtherObj.mbLineIsOutsideGeometry && bMarkProt == rOtherObj.bMarkProt && bIs3DObj == rOtherObj.bIs3DObj && bIsEdge == rOtherObj.bIsEdge && bClosedObj == rOtherObj.bClosedObj && bNotVisibleAsMaster == rOtherObj.bNotVisibleAsMaster && bEmptyPresObj == rOtherObj.bEmptyPresObj && mbVisible == rOtherObj.mbVisible && bNoPrint == rOtherObj.bNoPrint && bSizProt == rOtherObj.bSizProt && bMovProt == rOtherObj.bMovProt && bInserted == rOtherObj.bInserted && bVirtObj == rOtherObj.bVirtObj && mnLayerID == rOtherObj.mnLayerID && GetMergedItemSet().Equals(rOtherObj.GetMergedItemSet(), false) ); } void SdrObject::dumpAsXml(xmlTextWriterPtr pWriter) const { xmlTextWriterStartElement(pWriter, BAD_CAST("SdrObject")); xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("ptr"), "%p", this); xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("symbol"), "%s", BAD_CAST(typeid(*this).name())); xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("name"), "%s", BAD_CAST(GetName().toUtf8().getStr())); xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("title"), "%s", BAD_CAST(GetTitle().toUtf8().getStr())); xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("description"), "%s", BAD_CAST(GetDescription().toUtf8().getStr())); xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("nOrdNum"), "%" SAL_PRIuUINT32, GetOrdNumDirect()); xmlTextWriterWriteAttribute(pWriter, BAD_CAST("aOutRect"), BAD_CAST(aOutRect.toString().getStr())); if (const OutlinerParaObject* pOutliner = GetOutlinerParaObject()) pOutliner->dumpAsXml(pWriter); xmlTextWriterEndElement(pWriter); } void SdrObject::SetOutlinerParaObject(std::unique_ptr pTextObject) { tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); NbcSetOutlinerParaObject(std::move(pTextObject)); SetChanged(); BroadcastObjectChange(); if (GetCurrentBoundRect()!=aBoundRect0) { SendUserCall(SdrUserCallType::Resize,aBoundRect0); } } void SdrObject::NbcSetOutlinerParaObject(std::unique_ptr /*pTextObject*/) { } OutlinerParaObject* SdrObject::GetOutlinerParaObject() const { return nullptr; } void SdrObject::NbcReformatText() { } void SdrObject::ReformatText() { tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); NbcReformatText(); SetChanged(); BroadcastObjectChange(); if (GetCurrentBoundRect()!=aBoundRect0) { SendUserCall(SdrUserCallType::Resize,aBoundRect0); } } void SdrObject::BurnInStyleSheetAttributes() { GetProperties().ForceStyleToHardAttributes(); } bool SdrObject::HasMacro() const { return false; } SdrObject* SdrObject::CheckMacroHit(const SdrObjMacroHitRec& rRec) const { if(rRec.pPageView) { return SdrObjectPrimitiveHit(*this, rRec.aPos, rRec.nTol, *rRec.pPageView, rRec.pVisiLayer, false); } return nullptr; } Pointer SdrObject::GetMacroPointer(const SdrObjMacroHitRec&) const { return Pointer(PointerStyle::RefHand); } void SdrObject::PaintMacro(OutputDevice& rOut, const tools::Rectangle& , const SdrObjMacroHitRec& ) const { const RasterOp eRop(rOut.GetRasterOp()); const basegfx::B2DPolyPolygon aPolyPolygon(TakeXorPoly()); const sal_uInt32 nCount(aPolyPolygon.count()); rOut.SetLineColor(COL_BLACK); rOut.SetFillColor(); rOut.SetRasterOp(RasterOp::Invert); for(sal_uInt32 a(0); a < nCount; a++) { rOut.DrawPolyLine(aPolyPolygon.getB2DPolygon(a)); } rOut.SetRasterOp(eRop); } bool SdrObject::DoMacro(const SdrObjMacroHitRec&) { return false; } OUString SdrObject::GetMacroPopupComment(const SdrObjMacroHitRec&) const { return OUString(); } bool SdrObject::IsMacroHit(const SdrObjMacroHitRec& rRec) const { return CheckMacroHit(rRec) != nullptr; } SdrObjGeoData* SdrObject::NewGeoData() const { return new SdrObjGeoData; } void SdrObject::SaveGeoData(SdrObjGeoData& rGeo) const { rGeo.aBoundRect =GetCurrentBoundRect(); rGeo.aAnchor =aAnchor ; rGeo.bMovProt =bMovProt ; rGeo.bSizProt =bSizProt ; rGeo.bNoPrint =bNoPrint ; rGeo.mbVisible =mbVisible ; rGeo.bClosedObj =bClosedObj ; rGeo.mnLayerID = mnLayerID; // user-defined glue points if (pPlusData!=nullptr && pPlusData->pGluePoints!=nullptr) { if (rGeo.pGPL!=nullptr) { *rGeo.pGPL=*pPlusData->pGluePoints; } else { rGeo.pGPL.reset( new SdrGluePointList(*pPlusData->pGluePoints) ); } } else { rGeo.pGPL.reset(); } } void SdrObject::RestGeoData(const SdrObjGeoData& rGeo) { SetRectsDirty(); aOutRect =rGeo.aBoundRect ; aAnchor =rGeo.aAnchor ; bMovProt =rGeo.bMovProt ; bSizProt =rGeo.bSizProt ; bNoPrint =rGeo.bNoPrint ; mbVisible =rGeo.mbVisible ; bClosedObj =rGeo.bClosedObj ; mnLayerID = rGeo.mnLayerID; // user-defined glue points if (rGeo.pGPL!=nullptr) { ImpForcePlusData(); if (pPlusData->pGluePoints!=nullptr) { *pPlusData->pGluePoints=*rGeo.pGPL; } else { pPlusData->pGluePoints.reset(new SdrGluePointList(*rGeo.pGPL)); } } else { if (pPlusData!=nullptr && pPlusData->pGluePoints!=nullptr) { pPlusData->pGluePoints.reset(); } } } SdrObjGeoData* SdrObject::GetGeoData() const { SdrObjGeoData* pGeo=NewGeoData(); SaveGeoData(*pGeo); return pGeo; } void SdrObject::SetGeoData(const SdrObjGeoData& rGeo) { tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); RestGeoData(rGeo); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::Resize,aBoundRect0); } // ItemSet access const SfxItemSet& SdrObject::GetObjectItemSet() const { return GetProperties().GetObjectItemSet(); } const SfxItemSet& SdrObject::GetMergedItemSet() const { return GetProperties().GetMergedItemSet(); } void SdrObject::SetObjectItem(const SfxPoolItem& rItem) { GetProperties().SetObjectItem(rItem); } void SdrObject::SetMergedItem(const SfxPoolItem& rItem) { GetProperties().SetMergedItem(rItem); } void SdrObject::ClearMergedItem(const sal_uInt16 nWhich) { GetProperties().ClearMergedItem(nWhich); } void SdrObject::SetObjectItemSet(const SfxItemSet& rSet) { GetProperties().SetObjectItemSet(rSet); } void SdrObject::SetMergedItemSet(const SfxItemSet& rSet, bool bClearAllItems) { GetProperties().SetMergedItemSet(rSet, bClearAllItems); } const SfxPoolItem& SdrObject::GetObjectItem(const sal_uInt16 nWhich) const { return GetObjectItemSet().Get(nWhich); } const SfxPoolItem& SdrObject::GetMergedItem(const sal_uInt16 nWhich) const { return GetMergedItemSet().Get(nWhich); } void SdrObject::SetMergedItemSetAndBroadcast(const SfxItemSet& rSet, bool bClearAllItems) { GetProperties().SetMergedItemSetAndBroadcast(rSet, bClearAllItems); } void SdrObject::ApplyNotPersistAttr(const SfxItemSet& rAttr) { tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); NbcApplyNotPersistAttr(rAttr); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::Resize,aBoundRect0); } void SdrObject::NbcApplyNotPersistAttr(const SfxItemSet& rAttr) { const tools::Rectangle& rSnap=GetSnapRect(); const tools::Rectangle& rLogic=GetLogicRect(); Point aRef1(rSnap.Center()); const SfxPoolItem *pPoolItem=nullptr; if (rAttr.GetItemState(SDRATTR_TRANSFORMREF1X,true,&pPoolItem)==SfxItemState::SET) { aRef1.setX(static_cast(pPoolItem)->GetValue() ); } if (rAttr.GetItemState(SDRATTR_TRANSFORMREF1Y,true,&pPoolItem)==SfxItemState::SET) { aRef1.setY(static_cast(pPoolItem)->GetValue() ); } tools::Rectangle aNewSnap(rSnap); if (rAttr.GetItemState(SDRATTR_MOVEX,true,&pPoolItem)==SfxItemState::SET) { long n=static_cast(pPoolItem)->GetValue(); aNewSnap.Move(n,0); } if (rAttr.GetItemState(SDRATTR_MOVEY,true,&pPoolItem)==SfxItemState::SET) { long n=static_cast(pPoolItem)->GetValue(); aNewSnap.Move(0,n); } if (rAttr.GetItemState(SDRATTR_ONEPOSITIONX,true,&pPoolItem)==SfxItemState::SET) { long n=static_cast(pPoolItem)->GetValue(); aNewSnap.Move(n-aNewSnap.Left(),0); } if (rAttr.GetItemState(SDRATTR_ONEPOSITIONY,true,&pPoolItem)==SfxItemState::SET) { long n=static_cast(pPoolItem)->GetValue(); aNewSnap.Move(0,n-aNewSnap.Top()); } if (rAttr.GetItemState(SDRATTR_ONESIZEWIDTH,true,&pPoolItem)==SfxItemState::SET) { long n=static_cast(pPoolItem)->GetValue(); aNewSnap.SetRight(aNewSnap.Left()+n ); } if (rAttr.GetItemState(SDRATTR_ONESIZEHEIGHT,true,&pPoolItem)==SfxItemState::SET) { long n=static_cast(pPoolItem)->GetValue(); aNewSnap.SetBottom(aNewSnap.Top()+n ); } if (aNewSnap!=rSnap) { if (aNewSnap.GetSize()==rSnap.GetSize()) { NbcMove(Size(aNewSnap.Left()-rSnap.Left(),aNewSnap.Top()-rSnap.Top())); } else { NbcSetSnapRect(aNewSnap); } } if (rAttr.GetItemState(SDRATTR_SHEARANGLE,true,&pPoolItem)==SfxItemState::SET) { long n=static_cast(pPoolItem)->GetValue(); n-=GetShearAngle(); if (n!=0) { double nTan=tan(n*nPi180); NbcShear(aRef1,n,nTan,false); } } if (rAttr.GetItemState(SDRATTR_ROTATEANGLE,true,&pPoolItem)==SfxItemState::SET) { long n=static_cast(pPoolItem)->GetValue(); n-=GetRotateAngle(); if (n!=0) { double nSin=sin(n*nPi180); double nCos=cos(n*nPi180); NbcRotate(aRef1,n,nSin,nCos); } } if (rAttr.GetItemState(SDRATTR_ROTATEONE,true,&pPoolItem)==SfxItemState::SET) { long n=static_cast(pPoolItem)->GetValue(); double nSin=sin(n*nPi180); double nCos=cos(n*nPi180); NbcRotate(aRef1,n,nSin,nCos); } if (rAttr.GetItemState(SDRATTR_HORZSHEARONE,true,&pPoolItem)==SfxItemState::SET) { long n=static_cast(pPoolItem)->GetValue(); double nTan=tan(n*nPi180); NbcShear(aRef1,n,nTan,false); } if (rAttr.GetItemState(SDRATTR_VERTSHEARONE,true,&pPoolItem)==SfxItemState::SET) { long n=static_cast(pPoolItem)->GetValue(); double nTan=tan(n*nPi180); NbcShear(aRef1,n,nTan,true); } if (rAttr.GetItemState(SDRATTR_OBJMOVEPROTECT,true,&pPoolItem)==SfxItemState::SET) { bool b=static_cast(pPoolItem)->GetValue(); SetMoveProtect(b); } if (rAttr.GetItemState(SDRATTR_OBJSIZEPROTECT,true,&pPoolItem)==SfxItemState::SET) { bool b=static_cast(pPoolItem)->GetValue(); SetResizeProtect(b); } /* move protect always sets size protect */ if( IsMoveProtect() ) SetResizeProtect( true ); if (rAttr.GetItemState(SDRATTR_OBJPRINTABLE,true,&pPoolItem)==SfxItemState::SET) { bool b=static_cast(pPoolItem)->GetValue(); SetPrintable(b); } if (rAttr.GetItemState(SDRATTR_OBJVISIBLE,true,&pPoolItem)==SfxItemState::SET) { bool b=static_cast(pPoolItem)->GetValue(); SetVisible(b); } SdrLayerID nLayer=SDRLAYER_NOTFOUND; if (rAttr.GetItemState(SDRATTR_LAYERID,true,&pPoolItem)==SfxItemState::SET) { nLayer=static_cast(pPoolItem)->GetValue(); } if (rAttr.GetItemState(SDRATTR_LAYERNAME,true,&pPoolItem)==SfxItemState::SET) { OUString aLayerName = static_cast(pPoolItem)->GetValue(); const SdrLayerAdmin& rLayAd(nullptr != getSdrPageFromSdrObject() ? getSdrPageFromSdrObject()->GetLayerAdmin() : getSdrModelFromSdrObject().GetLayerAdmin()); const SdrLayer* pLayer = rLayAd.GetLayer(aLayerName); if(nullptr != pLayer) { nLayer=pLayer->GetID(); } } if (nLayer!=SDRLAYER_NOTFOUND) { NbcSetLayer(nLayer); } if (rAttr.GetItemState(SDRATTR_OBJECTNAME,true,&pPoolItem)==SfxItemState::SET) { OUString aName=static_cast(pPoolItem)->GetValue(); SetName(aName); } tools::Rectangle aNewLogic(rLogic); if (rAttr.GetItemState(SDRATTR_LOGICSIZEWIDTH,true,&pPoolItem)==SfxItemState::SET) { long n=static_cast(pPoolItem)->GetValue(); aNewLogic.SetRight(aNewLogic.Left()+n ); } if (rAttr.GetItemState(SDRATTR_LOGICSIZEHEIGHT,true,&pPoolItem)==SfxItemState::SET) { long n=static_cast(pPoolItem)->GetValue(); aNewLogic.SetBottom(aNewLogic.Top()+n ); } if (aNewLogic!=rLogic) { NbcSetLogicRect(aNewLogic); } Fraction aResizeX(1,1); Fraction aResizeY(1,1); if (rAttr.GetItemState(SDRATTR_RESIZEXONE,true,&pPoolItem)==SfxItemState::SET) { aResizeX*=static_cast(pPoolItem)->GetValue(); } if (rAttr.GetItemState(SDRATTR_RESIZEYONE,true,&pPoolItem)==SfxItemState::SET) { aResizeY*=static_cast(pPoolItem)->GetValue(); } if (aResizeX!=Fraction(1,1) || aResizeY!=Fraction(1,1)) { NbcResize(aRef1,aResizeX,aResizeY); } } void SdrObject::TakeNotPersistAttr(SfxItemSet& rAttr) const { const tools::Rectangle& rSnap=GetSnapRect(); const tools::Rectangle& rLogic=GetLogicRect(); rAttr.Put(SdrYesNoItem(SDRATTR_OBJMOVEPROTECT, IsMoveProtect())); rAttr.Put(SdrYesNoItem(SDRATTR_OBJSIZEPROTECT, IsResizeProtect())); rAttr.Put(SdrObjPrintableItem(IsPrintable())); rAttr.Put(SdrObjVisibleItem(IsVisible())); rAttr.Put(SdrAngleItem(SDRATTR_ROTATEANGLE, GetRotateAngle())); rAttr.Put(SdrShearAngleItem(GetShearAngle())); rAttr.Put(SdrOneSizeWidthItem(rSnap.GetWidth()-1)); rAttr.Put(SdrOneSizeHeightItem(rSnap.GetHeight()-1)); rAttr.Put(SdrOnePositionXItem(rSnap.Left())); rAttr.Put(SdrOnePositionYItem(rSnap.Top())); if (rLogic.GetWidth()!=rSnap.GetWidth()) { rAttr.Put(SdrLogicSizeWidthItem(rLogic.GetWidth()-1)); } if (rLogic.GetHeight()!=rSnap.GetHeight()) { rAttr.Put(SdrLogicSizeHeightItem(rLogic.GetHeight()-1)); } OUString aName(GetName()); if (!aName.isEmpty()) { rAttr.Put(SfxStringItem(SDRATTR_OBJECTNAME, aName)); } rAttr.Put(SdrLayerIdItem(GetLayer())); const SdrLayerAdmin& rLayAd(nullptr != getSdrPageFromSdrObject() ? getSdrPageFromSdrObject()->GetLayerAdmin() : getSdrModelFromSdrObject().GetLayerAdmin()); const SdrLayer* pLayer = rLayAd.GetLayerPerID(GetLayer()); if(nullptr != pLayer) { rAttr.Put(SdrLayerNameItem(pLayer->GetName())); } Point aRef1(rSnap.Center()); Point aRef2(aRef1); aRef2.AdjustY( 1 ); rAttr.Put(SdrTransformRef1XItem(aRef1.X())); rAttr.Put(SdrTransformRef1YItem(aRef1.Y())); rAttr.Put(SdrTransformRef2XItem(aRef2.X())); rAttr.Put(SdrTransformRef2YItem(aRef2.Y())); } SfxStyleSheet* SdrObject::GetStyleSheet() const { return GetProperties().GetStyleSheet(); } void SdrObject::SetStyleSheet(SfxStyleSheet* pNewStyleSheet, bool bDontRemoveHardAttr) { tools::Rectangle aBoundRect0; if(pUserCall) aBoundRect0 = GetLastBoundRect(); NbcSetStyleSheet(pNewStyleSheet, bDontRemoveHardAttr); SetChanged(); BroadcastObjectChange(); SendUserCall(SdrUserCallType::ChangeAttr, aBoundRect0); } void SdrObject::NbcSetStyleSheet(SfxStyleSheet* pNewStyleSheet, bool bDontRemoveHardAttr) { // only allow graphic and presentation styles for shapes if( pNewStyleSheet && (pNewStyleSheet->GetFamily() == SfxStyleFamily::Para) && (pNewStyleSheet->GetFamily() == SfxStyleFamily::Page) ) return; GetProperties().SetStyleSheet(pNewStyleSheet, bDontRemoveHardAttr); } // Broadcasting while setting attributes is managed by the AttrObj. bool SdrObject::IsNode() const { return true; } SdrGluePoint SdrObject::GetVertexGluePoint(sal_uInt16 nPosNum) const { // #i41936# Use SnapRect for default GluePoints const tools::Rectangle aR(GetSnapRect()); Point aPt; switch(nPosNum) { case 0 : aPt = aR.TopCenter(); break; case 1 : aPt = aR.RightCenter(); break; case 2 : aPt = aR.BottomCenter(); break; case 3 : aPt = aR.LeftCenter(); break; } aPt -= aR.Center(); SdrGluePoint aGP(aPt); aGP.SetPercent(false); return aGP; } SdrGluePoint SdrObject::GetCornerGluePoint(sal_uInt16 nPosNum) const { tools::Rectangle aR(GetCurrentBoundRect()); Point aPt; switch (nPosNum) { case 0 : aPt=aR.TopLeft(); break; case 1 : aPt=aR.TopRight(); break; case 2 : aPt=aR.BottomRight(); break; case 3 : aPt=aR.BottomLeft(); break; } aPt-=GetSnapRect().Center(); SdrGluePoint aGP(aPt); aGP.SetPercent(false); return aGP; } const SdrGluePointList* SdrObject::GetGluePointList() const { if (pPlusData!=nullptr) return pPlusData->pGluePoints.get(); return nullptr; } SdrGluePointList* SdrObject::ForceGluePointList() { ImpForcePlusData(); if (pPlusData->pGluePoints==nullptr) { pPlusData->pGluePoints.reset(new SdrGluePointList); } return pPlusData->pGluePoints.get(); } void SdrObject::SetGlueReallyAbsolute(bool bOn) { // First a const call to see whether there are any glue points. // Force const call! if (GetGluePointList()!=nullptr) { SdrGluePointList* pGPL=ForceGluePointList(); pGPL->SetReallyAbsolute(bOn,*this); } } void SdrObject::NbcRotateGluePoints(const Point& rRef, long nAngle, double sn, double cs) { // First a const call to see whether there are any glue points. // Force const call! if (GetGluePointList()!=nullptr) { SdrGluePointList* pGPL=ForceGluePointList(); pGPL->Rotate(rRef,nAngle,sn,cs,this); } } void SdrObject::NbcMirrorGluePoints(const Point& rRef1, const Point& rRef2) { // First a const call to see whether there are any glue points. // Force const call! if (GetGluePointList()!=nullptr) { SdrGluePointList* pGPL=ForceGluePointList(); pGPL->Mirror(rRef1,rRef2,this); } } void SdrObject::NbcShearGluePoints(const Point& rRef, double tn, bool bVShear) { // First a const call to see whether there are any glue points. // Force const call! if (GetGluePointList()!=nullptr) { SdrGluePointList* pGPL=ForceGluePointList(); pGPL->Shear(rRef,tn,bVShear,this); } } void SdrObject::ConnectToNode(bool /*bTail1*/, SdrObject* /*pObj*/) { } void SdrObject::DisconnectFromNode(bool /*bTail1*/) { } SdrObject* SdrObject::GetConnectedNode(bool /*bTail1*/) const { return nullptr; } void extractLineContourFromPrimitive2DSequence( const drawinglayer::primitive2d::Primitive2DContainer& rxSequence, basegfx::B2DPolygonVector& rExtractedHairlines, basegfx::B2DPolyPolygonVector& rExtractedLineFills) { rExtractedHairlines.clear(); rExtractedLineFills.clear(); if(!rxSequence.empty()) { // use neutral ViewInformation const drawinglayer::geometry::ViewInformation2D aViewInformation2D; // create extractor, process and get result drawinglayer::processor2d::LineGeometryExtractor2D aExtractor(aViewInformation2D); aExtractor.process(rxSequence); // copy line results rExtractedHairlines = aExtractor.getExtractedHairlines(); // copy fill rsults rExtractedLineFills = aExtractor.getExtractedLineFills(); } } SdrObject* SdrObject::ImpConvertToContourObj(bool bForceLineDash) { SdrObject* pRetval(nullptr); if(LineGeometryUsageIsNecessary()) { basegfx::B2DPolyPolygon aMergedLineFillPolyPolygon; basegfx::B2DPolyPolygon aMergedHairlinePolyPolygon; const drawinglayer::primitive2d::Primitive2DContainer xSequence(GetViewContact().getViewIndependentPrimitive2DContainer()); if(!xSequence.empty()) { basegfx::B2DPolygonVector aExtractedHairlines; basegfx::B2DPolyPolygonVector aExtractedLineFills; extractLineContourFromPrimitive2DSequence(xSequence, aExtractedHairlines, aExtractedLineFills); if(!aExtractedHairlines.empty()) { // for SdrObject creation, just copy all to a single Hairline-PolyPolygon for(basegfx::B2DPolygon & rExtractedHairline : aExtractedHairlines) { aMergedHairlinePolyPolygon.append(rExtractedHairline); } } // check for fill rsults if (!aExtractedLineFills.empty() && !utl::ConfigManager::IsFuzzing()) { // merge to a single tools::PolyPolygon (OR) aMergedLineFillPolyPolygon = basegfx::utils::mergeToSinglePolyPolygon(aExtractedLineFills); } } if(aMergedLineFillPolyPolygon.count() || (bForceLineDash && aMergedHairlinePolyPolygon.count())) { SfxItemSet aSet(GetMergedItemSet()); drawing::FillStyle eOldFillStyle = aSet.Get(XATTR_FILLSTYLE).GetValue(); SdrPathObj* aLinePolygonPart = nullptr; SdrPathObj* aLineHairlinePart = nullptr; bool bBuildGroup(false); if(aMergedLineFillPolyPolygon.count()) { // create SdrObject for filled line geometry aLinePolygonPart = new SdrPathObj( getSdrModelFromSdrObject(), OBJ_PATHFILL, aMergedLineFillPolyPolygon); // correct item properties aSet.Put(XLineWidthItem(0)); aSet.Put(XLineStyleItem(drawing::LineStyle_NONE)); Color aColorLine = aSet.Get(XATTR_LINECOLOR).GetColorValue(); sal_uInt16 nTransLine = aSet.Get(XATTR_LINETRANSPARENCE).GetValue(); aSet.Put(XFillColorItem(OUString(), aColorLine)); aSet.Put(XFillStyleItem(drawing::FillStyle_SOLID)); aSet.Put(XFillTransparenceItem(nTransLine)); aLinePolygonPart->SetMergedItemSet(aSet); } if(aMergedHairlinePolyPolygon.count()) { // create SdrObject for hairline geometry // OBJ_PATHLINE is necessary here, not OBJ_PATHFILL. This is intended // to get a non-filled object. If the poly is closed, the PathObj takes care for // the correct closed state. aLineHairlinePart = new SdrPathObj( getSdrModelFromSdrObject(), OBJ_PATHLINE, aMergedHairlinePolyPolygon); aSet.Put(XLineWidthItem(0)); aSet.Put(XFillStyleItem(drawing::FillStyle_NONE)); aSet.Put(XLineStyleItem(drawing::LineStyle_SOLID)); // it is also necessary to switch off line start and ends here aSet.Put(XLineStartWidthItem(0)); aSet.Put(XLineEndWidthItem(0)); aLineHairlinePart->SetMergedItemSet(aSet); if(aLinePolygonPart) { bBuildGroup = true; } } // check if original geometry should be added (e.g. filled and closed) bool bAddOriginalGeometry(false); SdrPathObj* pPath = dynamic_cast(this); if(pPath && pPath->IsClosed()) { if(eOldFillStyle != drawing::FillStyle_NONE) { bAddOriginalGeometry = true; } } // do we need a group? if(bBuildGroup || bAddOriginalGeometry) { SdrObject* pGroup = new SdrObjGroup(getSdrModelFromSdrObject()); if(bAddOriginalGeometry) { // Add a clone of the original geometry. aSet.ClearItem(); aSet.Put(GetMergedItemSet()); aSet.Put(XLineStyleItem(drawing::LineStyle_NONE)); aSet.Put(XLineWidthItem(0)); SdrObject* pClone(CloneSdrObject(getSdrModelFromSdrObject())); pClone->SetMergedItemSet(aSet); pGroup->GetSubList()->NbcInsertObject(pClone); } if(aLinePolygonPart) { pGroup->GetSubList()->NbcInsertObject(aLinePolygonPart); } if(aLineHairlinePart) { pGroup->GetSubList()->NbcInsertObject(aLineHairlinePart); } pRetval = pGroup; } else { if(aLinePolygonPart) { pRetval = aLinePolygonPart; } else if(aLineHairlinePart) { pRetval = aLineHairlinePart; } } } } if(nullptr == pRetval) { // due to current method usage, create and return a clone when nothing has changed SdrObject* pClone(CloneSdrObject(getSdrModelFromSdrObject())); pRetval = pClone; } return pRetval; } void SdrObject::SetMarkProtect(bool bProt) { bMarkProt = bProt; } void SdrObject::SetEmptyPresObj(bool bEpt) { bEmptyPresObj = bEpt; } void SdrObject::SetNotVisibleAsMaster(bool bFlg) { bNotVisibleAsMaster=bFlg; } // convert this path object to contour object, even when it is a group SdrObject* SdrObject::ConvertToContourObj(SdrObject* pRet, bool bForceLineDash) const { if(dynamic_cast( pRet) != nullptr) { SdrObjList* pObjList2 = pRet->GetSubList(); SdrObject* pGroup = new SdrObjGroup(getSdrModelFromSdrObject()); for(size_t a=0; aGetObjCount(); ++a) { SdrObject* pIterObj = pObjList2->GetObj(a); pGroup->GetSubList()->NbcInsertObject(ConvertToContourObj(pIterObj, bForceLineDash)); } pRet = pGroup; } else { if (SdrPathObj *pPathObj = dynamic_cast(pRet)) { // bezier geometry got created, even for straight edges since the given // object is a result of DoConvertToPolyObj. For conversion to contour // this is not really needed and can be reduced again AFAP pPathObj->SetPathPoly(basegfx::utils::simplifyCurveSegments(pPathObj->GetPathPoly())); } pRet = pRet->ImpConvertToContourObj(bForceLineDash); } // #i73441# preserve LayerID if(pRet && pRet->GetLayer() != GetLayer()) { pRet->SetLayer(GetLayer()); } return pRet; } SdrObject* SdrObject::ConvertToPolyObj(bool bBezier, bool bLineToArea) const { SdrObject* pRet = DoConvertToPolyObj(bBezier, true); if(pRet && bLineToArea) { SdrObject* pNewRet = ConvertToContourObj(pRet); delete pRet; pRet = pNewRet; } // #i73441# preserve LayerID if(pRet && pRet->GetLayer() != GetLayer()) { pRet->SetLayer(GetLayer()); } return pRet; } SdrObject* SdrObject::DoConvertToPolyObj(bool /*bBezier*/, bool /*bAddText*/) const { return nullptr; } void SdrObject::SetInserted(bool bIns) { if (bIns!=IsInserted()) { bInserted=bIns; tools::Rectangle aBoundRect0(GetLastBoundRect()); if (bIns) SendUserCall(SdrUserCallType::Inserted,aBoundRect0); else SendUserCall(SdrUserCallType::Removed,aBoundRect0); if (pPlusData!=nullptr && pPlusData->pBroadcast!=nullptr) { SdrHint aHint(bIns?SdrHintKind::ObjectInserted:SdrHintKind::ObjectRemoved, *this); pPlusData->pBroadcast->Broadcast(aHint); } } } void SdrObject::SetMoveProtect(bool bProt) { if(IsMoveProtect() != bProt) { // #i77187# secured and simplified bMovProt = bProt; SetChanged(); BroadcastObjectChange(); } } void SdrObject::SetResizeProtect(bool bProt) { if(IsResizeProtect() != bProt) { // #i77187# secured and simplified bSizProt = bProt; SetChanged(); BroadcastObjectChange(); } } void SdrObject::SetPrintable(bool bPrn) { if( bPrn == bNoPrint ) { bNoPrint=!bPrn; SetChanged(); if (IsInserted()) { SdrHint aHint(SdrHintKind::ObjectChange, *this); getSdrModelFromSdrObject().Broadcast(aHint); } } } void SdrObject::SetVisible(bool bVisible) { if( bVisible != mbVisible ) { mbVisible = bVisible; SetChanged(); if (IsInserted()) { SdrHint aHint(SdrHintKind::ObjectChange, *this); getSdrModelFromSdrObject().Broadcast(aHint); } } } sal_uInt16 SdrObject::GetUserDataCount() const { if (pPlusData==nullptr || pPlusData->pUserDataList==nullptr) return 0; return pPlusData->pUserDataList->GetUserDataCount(); } SdrObjUserData* SdrObject::GetUserData(sal_uInt16 nNum) const { if (pPlusData==nullptr || pPlusData->pUserDataList==nullptr) return nullptr; return &pPlusData->pUserDataList->GetUserData(nNum); } void SdrObject::AppendUserData(std::unique_ptr pData) { if (!pData) { OSL_FAIL("SdrObject::AppendUserData(): pData is NULL pointer."); return; } ImpForcePlusData(); if (!pPlusData->pUserDataList) pPlusData->pUserDataList.reset( new SdrObjUserDataList ); pPlusData->pUserDataList->AppendUserData(std::move(pData)); } void SdrObject::DeleteUserData(sal_uInt16 nNum) { sal_uInt16 nCount=GetUserDataCount(); if (nNumpUserDataList->DeleteUserData(nNum); if (nCount==1) { pPlusData->pUserDataList.reset(); } } else { OSL_FAIL("SdrObject::DeleteUserData(): Invalid Index."); } } void SdrObject::SetUserCall(SdrObjUserCall* pUser) { pUserCall = pUser; } void SdrObject::SendUserCall(SdrUserCallType eUserCall, const tools::Rectangle& rBoundRect) const { SdrObject* pGroup(getParentSdrObjectFromSdrObject()); if ( pUserCall ) { pUserCall->Changed( *this, eUserCall, rBoundRect ); } if(nullptr != pGroup && pGroup->GetUserCall()) { // broadcast to group SdrUserCallType eChildUserType = SdrUserCallType::ChildChangeAttr; switch( eUserCall ) { case SdrUserCallType::MoveOnly: eChildUserType = SdrUserCallType::ChildMoveOnly; break; case SdrUserCallType::Resize: eChildUserType = SdrUserCallType::ChildResize; break; case SdrUserCallType::ChangeAttr: eChildUserType = SdrUserCallType::ChildChangeAttr; break; case SdrUserCallType::Delete: eChildUserType = SdrUserCallType::ChildDelete; break; case SdrUserCallType::Inserted: eChildUserType = SdrUserCallType::ChildInserted; break; case SdrUserCallType::Removed: eChildUserType = SdrUserCallType::ChildRemoved; break; default: break; } pGroup->GetUserCall()->Changed( *this, eChildUserType, rBoundRect ); } // notify our UNO shape listeners switch ( eUserCall ) { case SdrUserCallType::Resize: notifyShapePropertyChange( svx::ShapeProperty::Size ); SAL_FALLTHROUGH; // RESIZE might also imply a change of the position case SdrUserCallType::MoveOnly: notifyShapePropertyChange( svx::ShapeProperty::Position ); break; default: // not interested in break; } } void SdrObject::impl_setUnoShape( const uno::Reference< uno::XInterface >& _rxUnoShape ) { const uno::Reference< uno::XInterface>& xOldUnoShape( maWeakUnoShape ); // the UNO shape would be gutted by the following code; return early if ( _rxUnoShape == xOldUnoShape ) { if ( !xOldUnoShape.is() ) { // make sure there is no stale impl. pointer if the UNO // shape was destroyed meanwhile (remember we only hold weak // reference to it!) mpSvxShape = nullptr; } return; } bool bTransferOwnership( false ); if ( xOldUnoShape.is() ) { bTransferOwnership = mpSvxShape->HasSdrObjectOwnership(); // Remove yourself from the current UNO shape. Its destructor // will reset our UNO shape otherwise. mpSvxShape->InvalidateSdrObject(); } maWeakUnoShape = _rxUnoShape; mpSvxShape = SvxShape::getImplementation( _rxUnoShape ); // I think this may never happen... But I am not sure enough .-) if ( bTransferOwnership ) { if (mpSvxShape) mpSvxShape->TakeSdrObjectOwnership(); SAL_WARN( "svx.uno", "a UNO shape took over an SdrObject previously owned by another UNO shape!"); } } /** only for internal use! */ SvxShape* SdrObject::getSvxShape() { DBG_TESTSOLARMUTEX(); // retrieving the impl pointer and subsequently using it is not thread-safe, of course, so it needs to be // guarded by the SolarMutex uno::Reference< uno::XInterface > xShape( maWeakUnoShape ); #if OSL_DEBUG_LEVEL > 0 OSL_ENSURE( !( !xShape.is() && mpSvxShape ), "SdrObject::getSvxShape: still having IMPL-Pointer to dead object!" ); #endif //#113608#, make sure mpSvxShape is always synchronized with maWeakUnoShape if ( mpSvxShape && !xShape.is() ) mpSvxShape = nullptr; return mpSvxShape; } css::uno::Reference< css::uno::XInterface > SdrObject::getUnoShape() { // try weak reference first uno::Reference< uno::XInterface > xShape( getWeakUnoShape() ); if( !xShape.is() ) { OSL_ENSURE( mpSvxShape == nullptr, "SdrObject::getUnoShape: XShape already dead, but still an IMPL pointer!" ); if ( getSdrPageFromSdrObject() ) { uno::Reference< uno::XInterface > xPage( getSdrPageFromSdrObject()->getUnoPage() ); if( xPage.is() ) { SvxDrawPage* pDrawPage = SvxDrawPage::getImplementation(xPage); if( pDrawPage ) { // create one xShape = pDrawPage->CreateShape( this ); impl_setUnoShape( xShape ); } } } else { mpSvxShape = SvxDrawPage::CreateShapeByTypeAndInventor( GetObjIdentifier(), GetObjInventor(), this ); maWeakUnoShape = xShape = static_cast< ::cppu::OWeakObject* >( mpSvxShape ); } } return xShape; } void SdrObject::setUnoShape(const uno::Reference& _rxUnoShape) { impl_setUnoShape( _rxUnoShape ); } svx::PropertyChangeNotifier& SdrObject::getShapePropertyChangeNotifier() { DBG_TESTSOLARMUTEX(); SvxShape* pSvxShape = getSvxShape(); ENSURE_OR_THROW( pSvxShape, "no SvxShape, yet!" ); return pSvxShape->getShapePropertyChangeNotifier(); } void SdrObject::notifyShapePropertyChange( const svx::ShapeProperty _eProperty ) const { DBG_TESTSOLARMUTEX(); SvxShape* pSvxShape = const_cast< SdrObject* >( this )->getSvxShape(); if ( pSvxShape ) return pSvxShape->getShapePropertyChangeNotifier().notifyPropertyChange( _eProperty ); } // transformation interface for StarOfficeAPI. This implements support for // homogeneous 3x3 matrices containing the transformation of the SdrObject. At the // moment it contains a shearX, rotation and translation, but for setting all linear // transforms like Scale, ShearX, ShearY, Rotate and Translate are supported. // gets base transformation and rectangle of object. If it's an SdrPathObj it fills the PolyPolygon // with the base geometry and returns TRUE. Otherwise it returns FALSE. bool SdrObject::TRGetBaseGeometry(basegfx::B2DHomMatrix& rMatrix, basegfx::B2DPolyPolygon& /*rPolyPolygon*/) const { // any kind of SdrObject, just use SnapRect tools::Rectangle aRectangle(GetSnapRect()); // convert to transformation values basegfx::B2DTuple aScale(aRectangle.GetWidth(), aRectangle.GetHeight()); basegfx::B2DTuple aTranslate(aRectangle.Left(), aRectangle.Top()); // position maybe relative to anchorpos, convert if(getSdrModelFromSdrObject().IsWriter()) { if(GetAnchorPos().X() || GetAnchorPos().Y()) { aTranslate -= basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y()); } } // build matrix rMatrix = basegfx::utils::createScaleTranslateB2DHomMatrix(aScale, aTranslate); return false; } // sets the base geometry of the object using infos contained in the homogeneous 3x3 matrix. // If it's an SdrPathObj it will use the provided geometry information. The Polygon has // to use (0,0) as upper left and will be scaled to the given size in the matrix. void SdrObject::TRSetBaseGeometry(const basegfx::B2DHomMatrix& rMatrix, const basegfx::B2DPolyPolygon& /*rPolyPolygon*/) { // break up matrix basegfx::B2DTuple aScale; basegfx::B2DTuple aTranslate; double fRotate, fShearX; rMatrix.decompose(aScale, aTranslate, fRotate, fShearX); // #i75086# Old DrawingLayer (GeoStat and geometry) does not support holding negative scalings // in X and Y which equal a 180 degree rotation. Recognize it and react accordingly if(basegfx::fTools::less(aScale.getX(), 0.0) && basegfx::fTools::less(aScale.getY(), 0.0)) { aScale.setX(fabs(aScale.getX())); aScale.setY(fabs(aScale.getY())); } // if anchor is used, make position relative to it if(getSdrModelFromSdrObject().IsWriter()) { if(GetAnchorPos().X() || GetAnchorPos().Y()) { aTranslate += basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y()); } } // build BaseRect Point aPoint(FRound(aTranslate.getX()), FRound(aTranslate.getY())); tools::Rectangle aBaseRect(aPoint, Size(FRound(aScale.getX()), FRound(aScale.getY()))); // set BaseRect SetSnapRect(aBaseRect); } // Give info if object is in destruction bool SdrObject::IsInDestruction() const { return getSdrModelFromSdrObject().IsInDestruction(); } // return if fill is != drawing::FillStyle_NONE bool SdrObject::HasFillStyle() const { return GetObjectItem(XATTR_FILLSTYLE).GetValue() != drawing::FillStyle_NONE; } bool SdrObject::HasLineStyle() const { return GetObjectItem(XATTR_LINESTYLE).GetValue() != drawing::LineStyle_NONE; } // #i52224# // on import of OLE object from MS documents the BLIP size might be retrieved, // the following four methods are used to control it; // usually this data makes no sense after the import is finished, since the object // might be resized void SdrObject::SetBLIPSizeRectangle( const tools::Rectangle& aRect ) { maBLIPSizeRectangle = aRect; } void SdrObject::SetContextWritingMode( const sal_Int16 /*_nContextWritingMode*/ ) { // this base class does not support different writing modes, so ignore the call } void SdrObject::SetDoNotInsertIntoPageAutomatically(const bool bSet) { mbDoNotInsertIntoPageAutomatically = bSet; } // #i121917# bool SdrObject::HasText() const { return false; } bool SdrObject::IsTextBox() const { return false; } SdrDelayBroadcastObjectChange::SdrDelayBroadcastObjectChange( SdrObject& rObj ) : mrObj(rObj), mbOldDelayBroadcastObjectChange( rObj.mbDelayBroadcastObjectChange) { mrObj.mbDelayBroadcastObjectChange = true; } SdrDelayBroadcastObjectChange::~SdrDelayBroadcastObjectChange() { if (!mbOldDelayBroadcastObjectChange) { mrObj.mbDelayBroadcastObjectChange = false; if (mrObj.mbBroadcastObjectChangePending) { mrObj.mbBroadcastObjectChangePending = false; mrObj.BroadcastObjectChange(); } } } SdrObject* SdrObjFactory::CreateObjectFromFactory(SdrModel& rSdrModel, SdrInventor nInventor, sal_uInt16 nObjIdentifier) { SdrObjCreatorParams aParams { nInventor, nObjIdentifier, rSdrModel }; for (const auto & i : ImpGetUserMakeObjHdl()) { SdrObject* pObj = i.Call(aParams); if (pObj) { return pObj; } } return nullptr; } SdrObject* SdrObjFactory::MakeNewObject( SdrModel& rSdrModel, SdrInventor nInventor, sal_uInt16 nIdentifier, const tools::Rectangle* pSnapRect) { SdrObject* pObj(nullptr); bool bSetSnapRect(nullptr != pSnapRect); if (nInventor == SdrInventor::Default) { switch (nIdentifier) { case OBJ_MEASURE: { if(nullptr != pSnapRect) { pObj = new SdrMeasureObj( rSdrModel, pSnapRect->TopLeft(), pSnapRect->BottomRight()); } else { pObj = new SdrMeasureObj(rSdrModel); } } break; case OBJ_LINE: { if(nullptr != pSnapRect) { basegfx::B2DPolygon aPoly; aPoly.append( basegfx::B2DPoint( pSnapRect->Left(), pSnapRect->Top())); aPoly.append( basegfx::B2DPoint( pSnapRect->Right(), pSnapRect->Bottom())); pObj = new SdrPathObj( rSdrModel, OBJ_LINE, basegfx::B2DPolyPolygon(aPoly)); } else { pObj = new SdrPathObj( rSdrModel, OBJ_LINE); } } break; case OBJ_TEXT: case OBJ_TITLETEXT: case OBJ_OUTLINETEXT: { if(nullptr != pSnapRect) { pObj = new SdrRectObj( rSdrModel, static_cast(nIdentifier), *pSnapRect); bSetSnapRect = false; } else { pObj = new SdrRectObj( rSdrModel, static_cast(nIdentifier)); } } break; case OBJ_CIRC: case OBJ_SECT: case OBJ_CARC: case OBJ_CCUT: { if(nullptr != pSnapRect) { pObj = new SdrCircObj( rSdrModel, static_cast(nIdentifier), *pSnapRect); bSetSnapRect = false; } else { pObj = new SdrCircObj( rSdrModel, static_cast(nIdentifier)); } } break; case sal_uInt16(OBJ_NONE ): pObj=new SdrObject(rSdrModel); break; case sal_uInt16(OBJ_GRUP ): pObj=new SdrObjGroup(rSdrModel); break; case sal_uInt16(OBJ_POLY ): pObj=new SdrPathObj(rSdrModel, OBJ_POLY ); break; case sal_uInt16(OBJ_PLIN ): pObj=new SdrPathObj(rSdrModel, OBJ_PLIN ); break; case sal_uInt16(OBJ_PATHLINE ): pObj=new SdrPathObj(rSdrModel, OBJ_PATHLINE ); break; case sal_uInt16(OBJ_PATHFILL ): pObj=new SdrPathObj(rSdrModel, OBJ_PATHFILL ); break; case sal_uInt16(OBJ_FREELINE ): pObj=new SdrPathObj(rSdrModel, OBJ_FREELINE ); break; case sal_uInt16(OBJ_FREEFILL ): pObj=new SdrPathObj(rSdrModel, OBJ_FREEFILL ); break; case sal_uInt16(OBJ_PATHPOLY ): pObj=new SdrPathObj(rSdrModel, OBJ_POLY ); break; case sal_uInt16(OBJ_PATHPLIN ): pObj=new SdrPathObj(rSdrModel, OBJ_PLIN ); break; case sal_uInt16(OBJ_EDGE ): pObj=new SdrEdgeObj(rSdrModel); break; case sal_uInt16(OBJ_RECT ): pObj=new SdrRectObj(rSdrModel); break; case sal_uInt16(OBJ_GRAF ): pObj=new SdrGrafObj(rSdrModel); break; case sal_uInt16(OBJ_OLE2 ): pObj=new SdrOle2Obj(rSdrModel); break; case sal_uInt16(OBJ_FRAME ): pObj=new SdrOle2Obj(rSdrModel, true); break; case sal_uInt16(OBJ_CAPTION ): pObj=new SdrCaptionObj(rSdrModel); break; case sal_uInt16(OBJ_PAGE ): pObj=new SdrPageObj(rSdrModel); break; case sal_uInt16(OBJ_UNO ): pObj=new SdrUnoObj(rSdrModel, OUString()); break; case sal_uInt16(OBJ_CUSTOMSHAPE ): pObj=new SdrObjCustomShape(rSdrModel); break; #if HAVE_FEATURE_AVMEDIA case sal_uInt16(OBJ_MEDIA ): pObj=new SdrMediaObj(rSdrModel); break; #endif case sal_uInt16(OBJ_TABLE ): pObj=new sdr::table::SdrTableObj(rSdrModel); break; } } if (!pObj) { pObj = CreateObjectFromFactory(rSdrModel, nInventor, nIdentifier); } if (!pObj) { // Well, if no one wants it... return nullptr; } if(bSetSnapRect && nullptr != pSnapRect) { pObj->SetSnapRect(*pSnapRect); } return pObj; } void SdrObjFactory::InsertMakeObjectHdl(Link const & rLink) { std::vector>& rLL=ImpGetUserMakeObjHdl(); auto it = std::find(rLL.begin(), rLL.end(), rLink); if (it != rLL.end()) { OSL_FAIL("SdrObjFactory::InsertMakeObjectHdl(): Link already in place."); } else { rLL.push_back(rLink); } } void SdrObjFactory::RemoveMakeObjectHdl(Link const & rLink) { std::vector>& rLL=ImpGetUserMakeObjHdl(); auto it = std::find(rLL.begin(), rLL.end(), rLink); if (it != rLL.end()) rLL.erase(it); } namespace svx { ISdrObjectFilter::~ISdrObjectFilter() { } } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */