/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include "svx/svditer.hxx" #include #include #include #include #include "svdglob.hxx" #include "svx/svdstr.hrc" #include #include #include #include #include #include #include #include // BaseProperties section sdr::properties::BaseProperties* SdrObjGroup::CreateObjectSpecificProperties() { return new sdr::properties::GroupProperties(*this); } // DrawContact section sdr::contact::ViewContact* SdrObjGroup::CreateObjectSpecificViewContact() { return new sdr::contact::ViewContactOfGroup(*this); } TYPEINIT1(SdrObjGroup,SdrObject); SdrObjGroup::SdrObjGroup() { pSub=new SdrObjList(NULL,NULL); pSub->SetOwnerObj(this); pSub->SetListKind(SDROBJLIST_GROUPOBJ); bRefPoint=false; bClosedObj=false; } SdrObjGroup::~SdrObjGroup() { delete pSub; } void SdrObjGroup::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const { rInfo.bNoContortion=false; SdrObjList* pOL=pSub; const size_t nObjAnz = pOL->GetObjCount(); for (size_t i=0; iGetObj(i); SdrObjTransformInfoRec aInfo; pObj->TakeObjInfo(aInfo); if (!aInfo.bMoveAllowed ) rInfo.bMoveAllowed =false; if (!aInfo.bResizeFreeAllowed ) rInfo.bResizeFreeAllowed =false; if (!aInfo.bResizePropAllowed ) rInfo.bResizePropAllowed =false; if (!aInfo.bRotateFreeAllowed ) rInfo.bRotateFreeAllowed =false; if (!aInfo.bRotate90Allowed ) rInfo.bRotate90Allowed =false; if (!aInfo.bMirrorFreeAllowed ) rInfo.bMirrorFreeAllowed =false; if (!aInfo.bMirror45Allowed ) rInfo.bMirror45Allowed =false; if (!aInfo.bMirror90Allowed ) rInfo.bMirror90Allowed =false; if (!aInfo.bShearAllowed ) rInfo.bShearAllowed =false; if (!aInfo.bEdgeRadiusAllowed ) rInfo.bEdgeRadiusAllowed =false; if (!aInfo.bNoOrthoDesired ) rInfo.bNoOrthoDesired =false; if (aInfo.bNoContortion ) rInfo.bNoContortion =true; if (!aInfo.bCanConvToPath ) rInfo.bCanConvToPath =false; if(!aInfo.bCanConvToContour) rInfo.bCanConvToContour = false; if (!aInfo.bCanConvToPoly ) rInfo.bCanConvToPoly =false; if (!aInfo.bCanConvToPathLineToArea) rInfo.bCanConvToPathLineToArea=false; if (!aInfo.bCanConvToPolyLineToArea) rInfo.bCanConvToPolyLineToArea=false; } if (nObjAnz==0) { rInfo.bRotateFreeAllowed=false; rInfo.bRotate90Allowed =false; rInfo.bMirrorFreeAllowed=false; rInfo.bMirror45Allowed =false; rInfo.bMirror90Allowed =false; rInfo.bTransparenceAllowed = false; rInfo.bGradientAllowed = false; rInfo.bShearAllowed =false; rInfo.bEdgeRadiusAllowed=false; rInfo.bNoContortion =true; } if(nObjAnz != 1) { // only allowed if single object selected rInfo.bTransparenceAllowed = false; rInfo.bGradientAllowed = false; } } void SdrObjGroup::SetBoundRectDirty() { // avoid resetting aOutRect which in case of this object is model data, // not re-creatable view data } sal_uInt16 SdrObjGroup::GetObjIdentifier() const { return sal_uInt16(OBJ_GRUP); } SdrLayerID SdrObjGroup::GetLayer() const { bool b1st = true; SdrLayerID nLay=SdrLayerID(SdrObject::GetLayer()); SdrObjList* pOL=pSub; const size_t nObjAnz = pOL->GetObjCount(); for (size_t i=0; iGetObj(i)->GetLayer(); if (b1st) { nLay=nLay1; b1st = false; } else if (nLay1!=nLay) return 0; } return nLay; } void SdrObjGroup::NbcSetLayer(SdrLayerID nLayer) { SdrObject::NbcSetLayer(nLayer); SdrObjList* pOL=pSub; const size_t nObjAnz = pOL->GetObjCount(); for (size_t i=0; iGetObj(i)->NbcSetLayer(nLayer); } } void SdrObjGroup::SetObjList(SdrObjList* pNewObjList) { SdrObject::SetObjList(pNewObjList); pSub->SetUpList(pNewObjList); } void SdrObjGroup::SetPage(SdrPage* pNewPage) { SdrObject::SetPage(pNewPage); pSub->SetPage(pNewPage); } void SdrObjGroup::SetModel(SdrModel* pNewModel) { if(pNewModel!=pModel) { // #i30648# // This method also needs to migrate the used ItemSet // when the destination model uses a different pool // than the current one. Else it is possible to create // SdrObjGroups which reference the old pool which might // be destroyed (as the bug shows). SdrModel* pOldModel = pModel; // test for correct pool in ItemSet; move to new pool if necessary if(pNewModel && &GetObjectItemPool() != &pNewModel->GetItemPool()) { MigrateItemPool(&GetObjectItemPool(), &pNewModel->GetItemPool(), pNewModel); } // call parent SdrObject::SetModel(pNewModel); // set new model at content pSub->SetModel(pNewModel); // modify properties GetProperties().SetModel(pOldModel, pNewModel); } } bool SdrObjGroup::HasRefPoint() const { return bRefPoint; } Point SdrObjGroup::GetRefPoint() const { return aRefPoint; } void SdrObjGroup::SetRefPoint(const Point& rPnt) { bRefPoint=true; aRefPoint=rPnt; } SdrObjList* SdrObjGroup::GetSubList() const { return pSub; } const Rectangle& SdrObjGroup::GetCurrentBoundRect() const { // has to contain the bounding rectangle if ( pSub->GetObjCount()!=0 ) { const_cast(this)->aOutRect = pSub->GetAllObjBoundRect(); } return aOutRect; } const Rectangle& SdrObjGroup::GetSnapRect() const { // has to contain the bounding rectangle if ( pSub->GetObjCount()!=0 ) { return pSub->GetAllObjSnapRect(); } else { return aOutRect; } } SdrObjGroup* SdrObjGroup::Clone() const { return CloneHelper< SdrObjGroup >(); } SdrObjGroup& SdrObjGroup::operator=(const SdrObjGroup& rObj) { if( this == &rObj ) return *this; // copy SdrObject stuff SdrObject::operator=(rObj); // #i36404# // copy SubList, init model and page first SdrObjList& rSourceSubList = *rObj.GetSubList(); pSub->SetPage(rSourceSubList.GetPage()); pSub->SetModel(rSourceSubList.GetModel()); pSub->CopyObjects(*rObj.GetSubList()); // copy local parameters aRefPoint = rObj.aRefPoint; bRefPoint = rObj.bRefPoint; return *this; } OUString SdrObjGroup::TakeObjNameSingul() const { OUStringBuffer sName; if(!pSub->GetObjCount()) { sName.append(ImpGetResStr(STR_ObjNameSingulGRUPEMPTY)); } else { sName.append(ImpGetResStr(STR_ObjNameSingulGRUP)); } const OUString aName(GetName()); if (!aName.isEmpty()) { sName.append(' '); sName.append('\''); sName.append(aName); sName.append('\''); } return sName.makeStringAndClear(); } OUString SdrObjGroup::TakeObjNamePlural() const { if (pSub->GetObjCount()==0) return ImpGetResStr(STR_ObjNamePluralGRUPEMPTY); return ImpGetResStr(STR_ObjNamePluralGRUP); } void SdrObjGroup::RecalcSnapRect() { // TODO: unnecessary, because we use the Rects from the SubList } basegfx::B2DPolyPolygon SdrObjGroup::TakeXorPoly() const { basegfx::B2DPolyPolygon aRetval; const size_t nObjCount(pSub->GetObjCount()); for(size_t a = 0; a < nObjCount; ++a) { SdrObject* pObj = pSub->GetObj(a); aRetval.append(pObj->TakeXorPoly()); } if(!aRetval.count()) { const basegfx::B2DRange aRange(aOutRect.Left(), aOutRect.Top(), aOutRect.Right(), aOutRect.Bottom()); aRetval.append(basegfx::tools::createPolygonFromRect(aRange)); } return aRetval; } bool SdrObjGroup::beginSpecialDrag(SdrDragStat& /*rDrag*/) const { return false; } bool SdrObjGroup::BegCreate(SdrDragStat& /*rStat*/) { return false; } long SdrObjGroup::GetRotateAngle() const { long nRetval(0); if(pSub->GetObjCount()) { SdrObject* pObj = pSub->GetObj(0); nRetval = pObj->GetRotateAngle(); } return nRetval; } long SdrObjGroup::GetShearAngle(bool /*bVertical*/) const { long nRetval(0); if(pSub->GetObjCount()) { SdrObject* pObj = pSub->GetObj(0); nRetval = pObj->GetShearAngle(); } return nRetval; } void SdrObjGroup::NbcSetSnapRect(const Rectangle& rRect) { Rectangle aOld(GetSnapRect()); long nMulX=rRect.Right()-rRect.Left(); long nDivX=aOld.Right()-aOld.Left(); long nMulY=rRect.Bottom()-rRect.Top(); long nDivY=aOld.Bottom()-aOld.Top(); if (nDivX==0) { nMulX=1; nDivX=1; } if (nDivY==0) { nMulY=1; nDivY=1; } if (nMulX!=nDivX || nMulY!=nDivY) { Fraction aX(nMulX,nDivX); Fraction aY(nMulY,nDivY); NbcResize(aOld.TopLeft(),aX,aY); } if (rRect.Left()!=aOld.Left() || rRect.Top()!=aOld.Top()) { NbcMove(Size(rRect.Left()-aOld.Left(),rRect.Top()-aOld.Top())); } } void SdrObjGroup::NbcSetLogicRect(const Rectangle& rRect) { NbcSetSnapRect(rRect); } void SdrObjGroup::NbcMove(const Size& rSiz) { MovePoint(aRefPoint,rSiz); if (pSub->GetObjCount()!=0) { SdrObjList* pOL=pSub; const size_t nObjAnz = pOL->GetObjCount(); for (size_t i=0; iGetObj(i); pObj->NbcMove(rSiz); } } else { MoveRect(aOutRect,rSiz); SetRectsDirty(); } } void SdrObjGroup::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact) { bool bXMirr=(xFact.GetNumerator()<0) != (xFact.GetDenominator()<0); bool bYMirr=(yFact.GetNumerator()<0) != (yFact.GetDenominator()<0); if (bXMirr || bYMirr) { Point aRef1(GetSnapRect().Center()); if (bXMirr) { Point aRef2(aRef1); aRef2.Y()++; NbcMirrorGluePoints(aRef1,aRef2); } if (bYMirr) { Point aRef2(aRef1); aRef2.X()++; NbcMirrorGluePoints(aRef1,aRef2); } } ResizePoint(aRefPoint,rRef,xFact,yFact); if (pSub->GetObjCount()!=0) { SdrObjList* pOL=pSub; const size_t nObjAnz = pOL->GetObjCount(); for (size_t i=0; iGetObj(i); pObj->NbcResize(rRef,xFact,yFact); } } else { ResizeRect(aOutRect,rRef,xFact,yFact); SetRectsDirty(); } } void SdrObjGroup::NbcRotate(const Point& rRef, long nWink, double sn, double cs) { SetGlueReallyAbsolute(true); RotatePoint(aRefPoint,rRef,sn,cs); SdrObjList* pOL=pSub; const size_t nObjAnz = pOL->GetObjCount(); for (size_t i=0; iGetObj(i); pObj->NbcRotate(rRef,nWink,sn,cs); } NbcRotateGluePoints(rRef,nWink,sn,cs); SetGlueReallyAbsolute(false); } void SdrObjGroup::NbcMirror(const Point& rRef1, const Point& rRef2) { SetGlueReallyAbsolute(true); MirrorPoint(aRefPoint,rRef1,rRef2); // implementation missing in SvdEtc! SdrObjList* pOL=pSub; const size_t nObjAnz = pOL->GetObjCount(); for (size_t i=0; iGetObj(i); pObj->NbcMirror(rRef1,rRef2); } NbcMirrorGluePoints(rRef1,rRef2); SetGlueReallyAbsolute(false); } void SdrObjGroup::NbcShear(const Point& rRef, long nWink, double tn, bool bVShear) { SetGlueReallyAbsolute(true); ShearPoint(aRefPoint,rRef,tn); SdrObjList* pOL=pSub; const size_t nObjAnz = pOL->GetObjCount(); for (size_t i=0; iGetObj(i); pObj->NbcShear(rRef,nWink,tn,bVShear); } NbcShearGluePoints(rRef,nWink,tn,bVShear); SetGlueReallyAbsolute(false); } void SdrObjGroup::NbcSetAnchorPos(const Point& rPnt) { aAnchor=rPnt; Size aSiz(rPnt.X()-aAnchor.X(),rPnt.Y()-aAnchor.Y()); MovePoint(aRefPoint,aSiz); SdrObjList* pOL=pSub; const size_t nObjAnz=pOL->GetObjCount(); for (size_t i=0; iGetObj(i); pObj->NbcSetAnchorPos(rPnt); } } void SdrObjGroup::SetSnapRect(const Rectangle& rRect) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); Rectangle aOld(GetSnapRect()); long nMulX=rRect.Right()-rRect.Left(); long nDivX=aOld.Right()-aOld.Left(); long nMulY=rRect.Bottom()-rRect.Top(); long nDivY=aOld.Bottom()-aOld.Top(); if (nDivX==0) { nMulX=1; nDivX=1; } if (nDivY==0) { nMulY=1; nDivY=1; } if (nMulX!=nDivX || nMulY!=nDivY) { Fraction aX(nMulX,nDivX); Fraction aY(nMulY,nDivY); Resize(aOld.TopLeft(),aX,aY); } if (rRect.Left()!=aOld.Left() || rRect.Top()!=aOld.Top()) { Move(Size(rRect.Left()-aOld.Left(),rRect.Top()-aOld.Top())); } SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } void SdrObjGroup::SetLogicRect(const Rectangle& rRect) { SetSnapRect(rRect); } void SdrObjGroup::Move(const Size& rSiz) { if (rSiz.Width()!=0 || rSiz.Height()!=0) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); MovePoint(aRefPoint,rSiz); if (pSub->GetObjCount()!=0) { // first move the connectors, then everything else SdrObjList* pOL=pSub; const size_t nObjAnz = pOL->GetObjCount(); for (size_t i=0; iGetObj(i); if (pObj->IsEdgeObj()) pObj->Move(rSiz); } for (size_t i=0; iGetObj(i); if (!pObj->IsEdgeObj()) pObj->Move(rSiz); } } else { MoveRect(aOutRect,rSiz); SetRectsDirty(); } SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_MOVEONLY,aBoundRect0); } } void SdrObjGroup::Resize(const Point& rRef, const Fraction& xFact, const Fraction& yFact, bool bUnsetRelative) { if (xFact.GetNumerator()!=xFact.GetDenominator() || yFact.GetNumerator()!=yFact.GetDenominator()) { bool bXMirr=(xFact.GetNumerator()<0) != (xFact.GetDenominator()<0); bool bYMirr=(yFact.GetNumerator()<0) != (yFact.GetDenominator()<0); if (bXMirr || bYMirr) { Point aRef1(GetSnapRect().Center()); if (bXMirr) { Point aRef2(aRef1); aRef2.Y()++; NbcMirrorGluePoints(aRef1,aRef2); } if (bYMirr) { Point aRef2(aRef1); aRef2.X()++; NbcMirrorGluePoints(aRef1,aRef2); } } Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); ResizePoint(aRefPoint,rRef,xFact,yFact); if (pSub->GetObjCount()!=0) { // move the connectors first, everything else afterwards SdrObjList* pOL=pSub; const size_t nObjAnz = pOL->GetObjCount(); for (size_t i=0; iGetObj(i); if (pObj->IsEdgeObj()) pObj->Resize(rRef,xFact,yFact,bUnsetRelative); } for (size_t i=0; iGetObj(i); if (!pObj->IsEdgeObj()) pObj->Resize(rRef,xFact,yFact,bUnsetRelative); } } else { ResizeRect(aOutRect,rRef,xFact,yFact); SetRectsDirty(); } SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } } void SdrObjGroup::Rotate(const Point& rRef, long nWink, double sn, double cs) { if (nWink!=0) { SetGlueReallyAbsolute(true); Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); RotatePoint(aRefPoint,rRef,sn,cs); // move the connectors first, everything else afterwards SdrObjList* pOL=pSub; const size_t nObjAnz = pOL->GetObjCount(); for (size_t i=0; iGetObj(i); if (pObj->IsEdgeObj()) pObj->Rotate(rRef,nWink,sn,cs); } for (size_t i=0; iGetObj(i); if (!pObj->IsEdgeObj()) pObj->Rotate(rRef,nWink,sn,cs); } NbcRotateGluePoints(rRef,nWink,sn,cs); SetGlueReallyAbsolute(false); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } } void SdrObjGroup::Mirror(const Point& rRef1, const Point& rRef2) { SetGlueReallyAbsolute(true); Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); MirrorPoint(aRefPoint,rRef1,rRef2); // implementation missing in SvdEtc! // move the connectors first, everything else afterwards SdrObjList* pOL=pSub; const size_t nObjAnz = pOL->GetObjCount(); for (size_t i=0; iGetObj(i); if (pObj->IsEdgeObj()) pObj->Mirror(rRef1,rRef2); } for (size_t i=0; iGetObj(i); if (!pObj->IsEdgeObj()) pObj->Mirror(rRef1,rRef2); } NbcMirrorGluePoints(rRef1,rRef2); SetGlueReallyAbsolute(false); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } void SdrObjGroup::Shear(const Point& rRef, long nWink, double tn, bool bVShear) { if (nWink!=0) { SetGlueReallyAbsolute(true); Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); ShearPoint(aRefPoint,rRef,tn); // move the connectors first, everything else afterwards SdrObjList* pOL=pSub; const size_t nObjAnz = pOL->GetObjCount(); for (size_t i=0; iGetObj(i); if (pObj->IsEdgeObj()) pObj->Shear(rRef,nWink,tn,bVShear); } for (size_t i=0; iGetObj(i); if (!pObj->IsEdgeObj()) pObj->Shear(rRef,nWink,tn,bVShear); } NbcShearGluePoints(rRef,nWink,tn,bVShear); SetGlueReallyAbsolute(false); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } } void SdrObjGroup::SetAnchorPos(const Point& rPnt) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); bool bChg=aAnchor!=rPnt; aAnchor=rPnt; Size aSiz(rPnt.X()-aAnchor.X(),rPnt.Y()-aAnchor.Y()); MovePoint(aRefPoint,aSiz); // move the connectors first, everything else afterwards SdrObjList* pOL=pSub; const size_t nObjAnz = pOL->GetObjCount(); for (size_t i=0; iGetObj(i); if (pObj->IsEdgeObj()) pObj->SetAnchorPos(rPnt); } for (size_t i=0; iGetObj(i); if (!pObj->IsEdgeObj()) pObj->SetAnchorPos(rPnt); } if (bChg) { SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_MOVEONLY,aBoundRect0); } } void SdrObjGroup::NbcSetRelativePos(const Point& rPnt) { Point aRelPos0(GetSnapRect().TopLeft()-aAnchor); Size aSiz(rPnt.X()-aRelPos0.X(),rPnt.Y()-aRelPos0.Y()); NbcMove(aSiz); // this also calls SetRectsDirty() } void SdrObjGroup::SetRelativePos(const Point& rPnt) { Point aRelPos0(GetSnapRect().TopLeft()-aAnchor); Size aSiz(rPnt.X()-aRelPos0.X(),rPnt.Y()-aRelPos0.Y()); if (aSiz.Width()!=0 || aSiz.Height()!=0) Move(aSiz); // this also calls SetRectsDirty() and Broadcast, ... } void SdrObjGroup::NbcReformatText() { pSub->NbcReformatAllTextObjects(); } void SdrObjGroup::ReformatText() { pSub->ReformatAllTextObjects(); } SdrObject* SdrObjGroup::DoConvertToPolyObj(bool bBezier, bool bAddText) const { SdrObject* pGroup = new SdrObjGroup; pGroup->SetModel(GetModel()); for(size_t a=0; aGetObjCount(); ++a) { SdrObject* pIterObj = pSub->GetObj(a); SdrObject* pResult = pIterObj->DoConvertToPolyObj(bBezier, bAddText); // pResult can be NULL e.g. for empty objects if( pResult ) pGroup->GetSubList()->NbcInsertObject(pResult); } return pGroup; } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */ feature/orcus-odf-rebased2 LibreOffice 核心代码仓库文档基金会
summaryrefslogtreecommitdiff
path: root/vcl/inc/unx/salunxtime.h
AgeCommit message (Expand)Author
2023-11-20tdf#143148: Use pragma once instead of include guards in vcl/inc/unxTaichi Haradaguchi
2023-01-27Remove support for AIXStephan Bergmann
2020-04-17loplugin:buriedassign in vclNoel Grandin