/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include "svdglob.hxx" #include "svx/svdstr.hrc" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "svdconv.hxx" using namespace com::sun::star; // BaseProperties section sdr::properties::BaseProperties* SdrTextObj::CreateObjectSpecificProperties() { return new sdr::properties::TextProperties(*this); } // DrawContact section sdr::contact::ViewContact* SdrTextObj::CreateObjectSpecificViewContact() { return new sdr::contact::ViewContactOfTextObj(*this); } TYPEINIT1(SdrTextObj,SdrAttrObj); SdrTextObj::SdrTextObj() : SdrAttrObj(), mpText(NULL), pEdtOutl(NULL), pFormTextBoundRect(NULL), eTextKind(OBJ_TEXT) { bTextSizeDirty=false; bTextFrame=false; bPortionInfoChecked=false; bNoShear=false; bNoRotate=false; bNoMirror=false; bDisableAutoWidthOnDragging=false; mbInEditMode = false; mbTextHidden = false; mbTextAnimationAllowed = true; maTextEditOffset = Point(0, 0); // #i25616# mbSupportTextIndentingOnLineWidthChange = true; mbInDownScale = false; } SdrTextObj::SdrTextObj(const Rectangle& rNewRect) : SdrAttrObj(), aRect(rNewRect), mpText(NULL), pEdtOutl(NULL), pFormTextBoundRect(NULL), eTextKind(OBJ_TEXT) { bTextSizeDirty=false; bTextFrame=false; bPortionInfoChecked=false; bNoShear=false; bNoRotate=false; bNoMirror=false; bDisableAutoWidthOnDragging=false; ImpJustifyRect(aRect); mbInEditMode = false; mbTextHidden = false; mbTextAnimationAllowed = true; mbInDownScale = false; maTextEditOffset = Point(0, 0); // #i25616# mbSupportTextIndentingOnLineWidthChange = true; } SdrTextObj::SdrTextObj(SdrObjKind eNewTextKind) : SdrAttrObj(), mpText(NULL), pEdtOutl(NULL), pFormTextBoundRect(NULL), eTextKind(eNewTextKind) { bTextSizeDirty=false; bTextFrame=true; bPortionInfoChecked=false; bNoShear=true; bNoRotate=false; bNoMirror=true; bDisableAutoWidthOnDragging=false; mbInEditMode = false; mbTextHidden = false; mbTextAnimationAllowed = true; mbInDownScale = false; maTextEditOffset = Point(0, 0); // #i25616# mbSupportTextIndentingOnLineWidthChange = true; } SdrTextObj::SdrTextObj(SdrObjKind eNewTextKind, const Rectangle& rNewRect) : SdrAttrObj(), aRect(rNewRect), mpText(NULL), pEdtOutl(NULL), pFormTextBoundRect(NULL), eTextKind(eNewTextKind) { bTextSizeDirty=false; bTextFrame=true; bPortionInfoChecked=false; bNoShear=true; bNoRotate=false; bNoMirror=true; bDisableAutoWidthOnDragging=false; ImpJustifyRect(aRect); mbInEditMode = false; mbTextHidden = false; mbTextAnimationAllowed = true; mbInDownScale = false; maTextEditOffset = Point(0, 0); // #i25616# mbSupportTextIndentingOnLineWidthChange = true; } SdrTextObj::~SdrTextObj() { if( pModel ) { SdrOutliner& rOutl = pModel->GetHitTestOutliner(); if( rOutl.GetTextObj() == this ) rOutl.SetTextObj( NULL ); } delete mpText; delete pFormTextBoundRect; ImpLinkAbmeldung(); } void SdrTextObj::FitFrameToTextSize() { DBG_ASSERT(pModel!=NULL,"SdrTextObj::FitFrameToTextSize(): pModel=NULL!"); ImpJustifyRect(aRect); SdrText* pText = getActiveText(); if( pText!=NULL && pText->GetOutlinerParaObject() && pModel!=NULL) { SdrOutliner& rOutliner=ImpGetDrawOutliner(); rOutliner.SetPaperSize(Size(aRect.Right()-aRect.Left(),aRect.Bottom()-aRect.Top())); rOutliner.SetUpdateMode(true); rOutliner.SetText(*pText->GetOutlinerParaObject()); Size aNewSize(rOutliner.CalcTextSize()); rOutliner.Clear(); aNewSize.Width()++; // because of possible rounding errors aNewSize.Width()+=GetTextLeftDistance()+GetTextRightDistance(); aNewSize.Height()+=GetTextUpperDistance()+GetTextLowerDistance(); Rectangle aNewRect(aRect); aNewRect.SetSize(aNewSize); ImpJustifyRect(aNewRect); if (aNewRect!=aRect) { SetLogicRect(aNewRect); } } } void SdrTextObj::NbcSetText(const OUString& rStr) { SdrOutliner& rOutliner=ImpGetDrawOutliner(); rOutliner.SetStyleSheet( 0, GetStyleSheet()); rOutliner.SetUpdateMode(true); rOutliner.SetText(rStr,rOutliner.GetParagraph( 0 )); OutlinerParaObject* pNewText=rOutliner.CreateParaObject(); Size aSiz(rOutliner.CalcTextSize()); rOutliner.Clear(); NbcSetOutlinerParaObject(pNewText); aTextSize=aSiz; bTextSizeDirty=false; } void SdrTextObj::SetText(const OUString& rStr) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); NbcSetText(rStr); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } void SdrTextObj::NbcSetText(SvStream& rInput, const OUString& rBaseURL, sal_uInt16 eFormat) { SdrOutliner& rOutliner=ImpGetDrawOutliner(); rOutliner.SetStyleSheet( 0, GetStyleSheet()); rOutliner.Read(rInput,rBaseURL,eFormat); OutlinerParaObject* pNewText=rOutliner.CreateParaObject(); rOutliner.SetUpdateMode(true); Size aSiz(rOutliner.CalcTextSize()); rOutliner.Clear(); NbcSetOutlinerParaObject(pNewText); aTextSize=aSiz; bTextSizeDirty=false; } void SdrTextObj::SetText(SvStream& rInput, const OUString& rBaseURL, sal_uInt16 eFormat) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); NbcSetText(rInput,rBaseURL,eFormat); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } const Size& SdrTextObj::GetTextSize() const { if (bTextSizeDirty) { Size aSiz; SdrText* pText = getActiveText(); if( pText && pText->GetOutlinerParaObject ()) { SdrOutliner& rOutliner=ImpGetDrawOutliner(); rOutliner.SetText(*pText->GetOutlinerParaObject()); rOutliner.SetUpdateMode(true); aSiz=rOutliner.CalcTextSize(); rOutliner.Clear(); } // casting to nonconst twice ((SdrTextObj*)this)->aTextSize=aSiz; ((SdrTextObj*)this)->bTextSizeDirty=false; } return aTextSize; } bool SdrTextObj::IsAutoGrowHeight() const { if(!bTextFrame) return false; // AutoGrow only together with TextFrames const SfxItemSet& rSet = GetObjectItemSet(); bool bRet = ((SdrOnOffItem&)(rSet.Get(SDRATTR_TEXT_AUTOGROWHEIGHT))).GetValue(); if(bRet) { SdrTextAniKind eAniKind = ((SdrTextAniKindItem&)(rSet.Get(SDRATTR_TEXT_ANIKIND))).GetValue(); if(eAniKind == SDRTEXTANI_SCROLL || eAniKind == SDRTEXTANI_ALTERNATE || eAniKind == SDRTEXTANI_SLIDE) { SdrTextAniDirection eDirection = ((SdrTextAniDirectionItem&)(rSet.Get(SDRATTR_TEXT_ANIDIRECTION))).GetValue(); if(eDirection == SDRTEXTANI_UP || eDirection == SDRTEXTANI_DOWN) { bRet = false; } } } return bRet; } bool SdrTextObj::IsAutoGrowWidth() const { if(!bTextFrame) return false; // AutoGrow only together with TextFrames const SfxItemSet& rSet = GetObjectItemSet(); bool bRet = ((SdrOnOffItem&)(rSet.Get(SDRATTR_TEXT_AUTOGROWWIDTH))).GetValue(); bool bInEditMOde = IsInEditMode(); if(!bInEditMOde && bRet) { SdrTextAniKind eAniKind = ((SdrTextAniKindItem&)(rSet.Get(SDRATTR_TEXT_ANIKIND))).GetValue(); if(eAniKind == SDRTEXTANI_SCROLL || eAniKind == SDRTEXTANI_ALTERNATE || eAniKind == SDRTEXTANI_SLIDE) { SdrTextAniDirection eDirection = ((SdrTextAniDirectionItem&)(rSet.Get(SDRATTR_TEXT_ANIDIRECTION))).GetValue(); if(eDirection == SDRTEXTANI_LEFT || eDirection == SDRTEXTANI_RIGHT) { bRet = false; } } } return bRet; } SdrTextHorzAdjust SdrTextObj::GetTextHorizontalAdjust() const { return GetTextHorizontalAdjust(GetObjectItemSet()); } SdrTextHorzAdjust SdrTextObj::GetTextHorizontalAdjust(const SfxItemSet& rSet) const { if(IsContourTextFrame()) return SDRTEXTHORZADJUST_BLOCK; SdrTextHorzAdjust eRet = ((SdrTextHorzAdjustItem&)(rSet.Get(SDRATTR_TEXT_HORZADJUST))).GetValue(); bool bInEditMode = IsInEditMode(); if(!bInEditMode && eRet == SDRTEXTHORZADJUST_BLOCK) { SdrTextAniKind eAniKind = ((SdrTextAniKindItem&)(rSet.Get(SDRATTR_TEXT_ANIKIND))).GetValue(); if(eAniKind == SDRTEXTANI_SCROLL || eAniKind == SDRTEXTANI_ALTERNATE || eAniKind == SDRTEXTANI_SLIDE) { SdrTextAniDirection eDirection = ((SdrTextAniDirectionItem&)(rSet.Get(SDRATTR_TEXT_ANIDIRECTION))).GetValue(); if(eDirection == SDRTEXTANI_LEFT || eDirection == SDRTEXTANI_RIGHT) { eRet = SDRTEXTHORZADJUST_LEFT; } } } return eRet; } // defaults: BLOCK (justify) for text frame, CENTER for captions of drawing objects SdrTextVertAdjust SdrTextObj::GetTextVerticalAdjust() const { return GetTextVerticalAdjust(GetObjectItemSet()); } SdrTextVertAdjust SdrTextObj::GetTextVerticalAdjust(const SfxItemSet& rSet) const { if(IsContourTextFrame()) return SDRTEXTVERTADJUST_TOP; // Take care for vertical text animation here SdrTextVertAdjust eRet = ((SdrTextVertAdjustItem&)(rSet.Get(SDRATTR_TEXT_VERTADJUST))).GetValue(); bool bInEditMode = IsInEditMode(); // Take care for vertical text animation here if(!bInEditMode && eRet == SDRTEXTVERTADJUST_BLOCK) { SdrTextAniKind eAniKind = ((SdrTextAniKindItem&)(rSet.Get(SDRATTR_TEXT_ANIKIND))).GetValue(); if(eAniKind == SDRTEXTANI_SCROLL || eAniKind == SDRTEXTANI_ALTERNATE || eAniKind == SDRTEXTANI_SLIDE) { SdrTextAniDirection eDirection = ((SdrTextAniDirectionItem&)(rSet.Get(SDRATTR_TEXT_ANIDIRECTION))).GetValue(); if(eDirection == SDRTEXTANI_LEFT || eDirection == SDRTEXTANI_RIGHT) { eRet = SDRTEXTVERTADJUST_TOP; } } } return eRet; } // defaults: TOP for text frame, CENTER for captions of drawing objects void SdrTextObj::ImpJustifyRect(Rectangle& rRect) const { if (!rRect.IsEmpty()) { rRect.Justify(); if (rRect.Left()==rRect.Right()) rRect.Right()++; if (rRect.Top()==rRect.Bottom()) rRect.Bottom()++; } } void SdrTextObj::ImpCheckShear() { if (bNoShear && aGeo.nShearWink!=0) { aGeo.nShearWink=0; aGeo.nTan=0; } } void SdrTextObj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const { bool bNoTextFrame=!IsTextFrame(); rInfo.bResizeFreeAllowed=bNoTextFrame || aGeo.nDrehWink%9000==0; rInfo.bResizePropAllowed=true; rInfo.bRotateFreeAllowed=true; rInfo.bRotate90Allowed =true; rInfo.bMirrorFreeAllowed=bNoTextFrame; rInfo.bMirror45Allowed =bNoTextFrame; rInfo.bMirror90Allowed =bNoTextFrame; // allow transparency rInfo.bTransparenceAllowed = true; // gradient depends on fillstyle drawing::FillStyle eFillStyle = ((XFillStyleItem&)(GetObjectItem(XATTR_FILLSTYLE))).GetValue(); rInfo.bGradientAllowed = (eFillStyle == drawing::FillStyle_GRADIENT); rInfo.bShearAllowed =bNoTextFrame; rInfo.bEdgeRadiusAllowed=true; bool bCanConv=ImpCanConvTextToCurve(); rInfo.bCanConvToPath =bCanConv; rInfo.bCanConvToPoly =bCanConv; rInfo.bCanConvToPathLineToArea=bCanConv; rInfo.bCanConvToPolyLineToArea=bCanConv; rInfo.bCanConvToContour = (rInfo.bCanConvToPoly || LineGeometryUsageIsNecessary()); } sal_uInt16 SdrTextObj::GetObjIdentifier() const { return sal_uInt16(eTextKind); } bool SdrTextObj::HasTextImpl( SdrOutliner* pOutliner ) { bool bRet=false; if(pOutliner) { Paragraph* p1stPara=pOutliner->GetParagraph( 0 ); sal_Int32 nParaAnz=pOutliner->GetParagraphCount(); if(p1stPara==NULL) nParaAnz=0; if(nParaAnz==1) { // if it is only one paragraph, check if that paragraph is empty if( pOutliner->GetText(p1stPara).isEmpty() ) nParaAnz = 0; } bRet= nParaAnz!=0; } return bRet; } bool SdrTextObj::HasEditText() const { return HasTextImpl( pEdtOutl ); } void SdrTextObj::SetPage(SdrPage* pNewPage) { bool bRemove=pNewPage==NULL && pPage!=NULL; bool bInsert=pNewPage!=NULL && pPage==NULL; bool bLinked=IsLinkedText(); if (bLinked && bRemove) { ImpLinkAbmeldung(); } SdrAttrObj::SetPage(pNewPage); if (bLinked && bInsert) { ImpLinkAnmeldung(); } } void SdrTextObj::SetModel(SdrModel* pNewModel) { SdrModel* pOldModel=pModel; bool bLinked=IsLinkedText(); bool bChg=pNewModel!=pModel; if (bLinked && bChg) { ImpLinkAbmeldung(); } SdrAttrObj::SetModel(pNewModel); if( bChg ) { if( pNewModel != 0 && pOldModel != 0 ) SetTextSizeDirty(); sal_Int32 nCount = getTextCount(); for( sal_Int32 nText = 0; nText < nCount; nText++ ) { SdrText* pText = getText( nText ); if( pText ) pText->SetModel( pNewModel ); } } if (bLinked && bChg) { ImpLinkAnmeldung(); } } bool SdrTextObj::NbcSetEckenradius(long nRad) { SetObjectItem(makeSdrEckenradiusItem(nRad)); return true; } // #115391# This implementation is based on the object size (aRect) and the // states of IsAutoGrowWidth/Height to correctly set TextMinFrameWidth/Height void SdrTextObj::AdaptTextMinSize() { if(bTextFrame && (!pModel || !pModel->IsPasteResize())) { const bool bW(IsAutoGrowWidth()); const bool bH(IsAutoGrowHeight()); if(bW || bH) { SfxItemSet aSet( *GetObjectItemSet().GetPool(), SDRATTR_TEXT_MINFRAMEHEIGHT, SDRATTR_TEXT_AUTOGROWHEIGHT, SDRATTR_TEXT_MINFRAMEWIDTH, SDRATTR_TEXT_AUTOGROWWIDTH, // contains SDRATTR_TEXT_MAXFRAMEWIDTH 0, 0); if(bW) { const long nDist(GetTextLeftDistance() + GetTextRightDistance()); const long nW(std::max(long(0), (long)(aRect.GetWidth() - 1 - nDist))); aSet.Put(makeSdrTextMinFrameWidthItem(nW)); if(!IsVerticalWriting() && bDisableAutoWidthOnDragging) { bDisableAutoWidthOnDragging = true; aSet.Put(makeSdrTextAutoGrowWidthItem(false)); } } if(bH) { const long nDist(GetTextUpperDistance() + GetTextLowerDistance()); const long nH(std::max(long(0), (long)(aRect.GetHeight() - 1 - nDist))); aSet.Put(makeSdrTextMinFrameHeightItem(nH)); if(IsVerticalWriting() && bDisableAutoWidthOnDragging) { bDisableAutoWidthOnDragging = false; aSet.Put(makeSdrTextAutoGrowHeightItem(false)); } } SetObjectItemSet(aSet); NbcAdjustTextFrameWidthAndHeight(); } } } void SdrTextObj::ImpSetContourPolygon( SdrOutliner& rOutliner, Rectangle& rAnchorRect, bool bLineWidth ) const { basegfx::B2DPolyPolygon aXorPolyPolygon(TakeXorPoly()); basegfx::B2DPolyPolygon* pContourPolyPolygon = 0L; basegfx::B2DHomMatrix aMatrix(basegfx::tools::createTranslateB2DHomMatrix( -rAnchorRect.Left(), -rAnchorRect.Top())); if(aGeo.nDrehWink) { // Unrotate! aMatrix.rotate(-aGeo.nDrehWink * nPi180); } aXorPolyPolygon.transform(aMatrix); if( bLineWidth ) { // Take line width into account. // When doing the hit test, avoid this. (Performance!) pContourPolyPolygon = new basegfx::B2DPolyPolygon(); // test if shadow needs to be avoided for TakeContour() const SfxItemSet& rSet = GetObjectItemSet(); bool bShadowOn = ((SdrOnOffItem&)(rSet.Get(SDRATTR_SHADOW))).GetValue(); // #i33696# // Remember TextObject currently set at the DrawOutliner, it WILL be // replaced during calculating the outline since it uses an own paint // and that one uses the DrawOutliner, too. const SdrTextObj* pLastTextObject = rOutliner.GetTextObj(); if(bShadowOn) { // force shadow off SdrObject* pCopy = Clone(); pCopy->SetMergedItem(makeSdrShadowItem(false)); *pContourPolyPolygon = pCopy->TakeContour(); SdrObject::Free( pCopy ); } else { *pContourPolyPolygon = TakeContour(); } // #i33696# // restore remembered text object if(pLastTextObject != rOutliner.GetTextObj()) { rOutliner.SetTextObj(pLastTextObject); } pContourPolyPolygon->transform(aMatrix); } rOutliner.SetPolygon(aXorPolyPolygon, pContourPolyPolygon); delete pContourPolyPolygon; } void SdrTextObj::TakeUnrotatedSnapRect(Rectangle& rRect) const { rRect=aRect; } void SdrTextObj::TakeTextAnchorRect(Rectangle& rAnchorRect) const { long nLeftDist=GetTextLeftDistance(); long nRightDist=GetTextRightDistance(); long nUpperDist=GetTextUpperDistance(); long nLowerDist=GetTextLowerDistance(); Rectangle aAnkRect(aRect); // the rectangle in which we anchor bool bFrame=IsTextFrame(); if (!bFrame) { TakeUnrotatedSnapRect(aAnkRect); } Point aRotateRef(aAnkRect.TopLeft()); aAnkRect.Left()+=nLeftDist; aAnkRect.Top()+=nUpperDist; aAnkRect.Right()-=nRightDist; aAnkRect.Bottom()-=nLowerDist; // Since sizes may be bigger than the object bounds it is necessary to // justify the rect now. ImpJustifyRect(aAnkRect); if (bFrame) { // TODO: Optimize this. if (aAnkRect.GetWidth()<2) aAnkRect.Right()=aAnkRect.Left()+1; // minimum size h and v: 2 px if (aAnkRect.GetHeight()<2) aAnkRect.Bottom()=aAnkRect.Top()+1; } if (aGeo.nDrehWink!=0) { Point aTmpPt(aAnkRect.TopLeft()); RotatePoint(aTmpPt,aRotateRef,aGeo.nSin,aGeo.nCos); aTmpPt-=aAnkRect.TopLeft(); aAnkRect.Move(aTmpPt.X(),aTmpPt.Y()); } rAnchorRect=aAnkRect; } void SdrTextObj::TakeTextRect( SdrOutliner& rOutliner, Rectangle& rTextRect, bool bNoEditText, Rectangle* pAnchorRect, bool bLineWidth ) const { Rectangle aAnkRect; // the rectangle in which we anchor TakeTextAnchorRect(aAnkRect); SdrTextVertAdjust eVAdj=GetTextVerticalAdjust(); SdrTextHorzAdjust eHAdj=GetTextHorizontalAdjust(); SdrTextAniKind eAniKind=GetTextAniKind(); SdrTextAniDirection eAniDirection=GetTextAniDirection(); bool bFitToSize(IsFitToSize()); bool bContourFrame=IsContourTextFrame(); bool bFrame=IsTextFrame(); sal_uIntPtr nStat0=rOutliner.GetControlWord(); Size aNullSize; if (!bContourFrame) { rOutliner.SetControlWord(nStat0|EE_CNTRL_AUTOPAGESIZE); rOutliner.SetMinAutoPaperSize(aNullSize); rOutliner.SetMaxAutoPaperSize(Size(1000000,1000000)); } if (!bFitToSize && !bContourFrame) { long nAnkWdt=aAnkRect.GetWidth(); long nAnkHgt=aAnkRect.GetHeight(); if (bFrame) { long nWdt=nAnkWdt; long nHgt=nAnkHgt; bool bInEditMode = IsInEditMode(); if (!bInEditMode && (eAniKind==SDRTEXTANI_SCROLL || eAniKind==SDRTEXTANI_ALTERNATE || eAniKind==SDRTEXTANI_SLIDE)) { // unlimited paper size for ticker text if (eAniDirection==SDRTEXTANI_LEFT || eAniDirection==SDRTEXTANI_RIGHT) nWdt=1000000; if (eAniDirection==SDRTEXTANI_UP || eAniDirection==SDRTEXTANI_DOWN) nHgt=1000000; } // #i119885# Do not limit/force height to geometrical frame (vice versa for vertical writing) if(IsVerticalWriting()) { nWdt = 1000000; } else { nHgt = 1000000; } rOutliner.SetMaxAutoPaperSize(Size(nWdt,nHgt)); } // New try with _BLOCK for hor and ver after completely // supporting full width for vertical text. if(SDRTEXTHORZADJUST_BLOCK == eHAdj && !IsVerticalWriting()) { rOutliner.SetMinAutoPaperSize(Size(nAnkWdt, 0)); } if(SDRTEXTVERTADJUST_BLOCK == eVAdj && IsVerticalWriting()) { rOutliner.SetMinAutoPaperSize(Size(0, nAnkHgt)); } } rOutliner.SetPaperSize(aNullSize); if (bContourFrame) ImpSetContourPolygon( rOutliner, aAnkRect, bLineWidth ); // put text into the outliner, if available from the edit outliner SdrText* pText = getActiveText(); OutlinerParaObject* pOutlinerParaObject = pText ? pText->GetOutlinerParaObject() : 0; OutlinerParaObject* pPara = (pEdtOutl && !bNoEditText) ? pEdtOutl->CreateParaObject() : pOutlinerParaObject; if (pPara) { bool bHitTest = false; if( pModel ) bHitTest = &pModel->GetHitTestOutliner() == &rOutliner; const SdrTextObj* pTestObj = rOutliner.GetTextObj(); if( !pTestObj || !bHitTest || pTestObj != this || pTestObj->GetOutlinerParaObject() != pOutlinerParaObject ) { if( bHitTest ) // #i33696# take back fix #i27510# { rOutliner.SetTextObj( this ); rOutliner.SetFixedCellHeight(((const SdrTextFixedCellHeightItem&)GetMergedItem(SDRATTR_TEXT_USEFIXEDCELLHEIGHT)).GetValue()); } rOutliner.SetUpdateMode(true); rOutliner.SetText(*pPara); } } else { rOutliner.SetTextObj( NULL ); } if (pEdtOutl && !bNoEditText && pPara) delete pPara; rOutliner.SetUpdateMode(true); rOutliner.SetControlWord(nStat0); if( pText ) pText->CheckPortionInfo(rOutliner); Point aTextPos(aAnkRect.TopLeft()); Size aTextSiz(rOutliner.GetPaperSize()); // GetPaperSize() adds a little tolerance, right? // For draw objects containing text correct hor/ver alignment if text is bigger // than the object itself. Without that correction, the text would always be // formatted to the left edge (or top edge when vertical) of the draw object. if(!IsTextFrame()) { if(aAnkRect.GetWidth() < aTextSiz.Width() && !IsVerticalWriting()) { // Horizontal case here. Correct only if eHAdj == SDRTEXTHORZADJUST_BLOCK, // else the alignment is wanted. if(SDRTEXTHORZADJUST_BLOCK == eHAdj) { eHAdj = SDRTEXTHORZADJUST_CENTER; } } if(aAnkRect.GetHeight() < aTextSiz.Height() && IsVerticalWriting()) { // Vertical case here. Correct only if eHAdj == SDRTEXTVERTADJUST_BLOCK, // else the alignment is wanted. if(SDRTEXTVERTADJUST_BLOCK == eVAdj) { eVAdj = SDRTEXTVERTADJUST_CENTER; } } } if (eHAdj==SDRTEXTHORZADJUST_CENTER || eHAdj==SDRTEXTHORZADJUST_RIGHT) { long nFreeWdt=aAnkRect.GetWidth()-aTextSiz.Width(); if (eHAdj==SDRTEXTHORZADJUST_CENTER) aTextPos.X()+=nFreeWdt/2; if (eHAdj==SDRTEXTHORZADJUST_RIGHT) aTextPos.X()+=nFreeWdt; } if (eVAdj==SDRTEXTVERTADJUST_CENTER || eVAdj==SDRTEXTVERTADJUST_BOTTOM) { long nFreeHgt=aAnkRect.GetHeight()-aTextSiz.Height(); if (eVAdj==SDRTEXTVERTADJUST_CENTER) aTextPos.Y()+=nFreeHgt/2; if (eVAdj==SDRTEXTVERTADJUST_BOTTOM) aTextPos.Y()+=nFreeHgt; } if (aGeo.nDrehWink!=0) RotatePoint(aTextPos,aAnkRect.TopLeft(),aGeo.nSin,aGeo.nCos); if (pAnchorRect) *pAnchorRect=aAnkRect; // rTextRect might not be correct in some cases at ContourFrame rTextRect=Rectangle(aTextPos,aTextSiz); if (bContourFrame) rTextRect=aAnkRect; } OutlinerParaObject* SdrTextObj::GetEditOutlinerParaObject() const { OutlinerParaObject* pPara=NULL; if( HasTextImpl( pEdtOutl ) ) { sal_Int32 nParaAnz = pEdtOutl->GetParagraphCount(); pPara = pEdtOutl->CreateParaObject(0, nParaAnz); } return pPara; } void SdrTextObj::ImpSetCharStretching(SdrOutliner& rOutliner, const Size& rTextSize, const Size& rShapeSize, Fraction& rFitXKorreg) const { OutputDevice* pOut = rOutliner.GetRefDevice(); bool bNoStretching(false); if(pOut && pOut->GetOutDevType() == OUTDEV_PRINTER) { // check whether CharStretching is possible at all GDIMetaFile* pMtf = pOut->GetConnectMetaFile(); OUString aTestString(static_cast('J')); if(pMtf && (!pMtf->IsRecord() || pMtf->IsPause())) pMtf = NULL; if(pMtf) pMtf->Pause(true); Font aFontMerk(pOut->GetFont()); Font aTmpFont( OutputDevice::GetDefaultFont( DEFAULTFONT_SERIF, LANGUAGE_SYSTEM, DEFAULTFONT_FLAGS_ONLYONE ) ); aTmpFont.SetSize(Size(0,100)); pOut->SetFont(aTmpFont); Size aSize1(pOut->GetTextWidth(aTestString), pOut->GetTextHeight()); aTmpFont.SetSize(Size(800,100)); pOut->SetFont(aTmpFont); Size aSize2(pOut->GetTextWidth(aTestString), pOut->GetTextHeight()); pOut->SetFont(aFontMerk); if(pMtf) pMtf->Pause(false); bNoStretching = (aSize1 == aSize2); #ifdef WNT // Windows zooms the font proportionally when using Size(100,500), // we don't like that. if(aSize2.Height() >= aSize1.Height() * 2) { bNoStretching = true; } #endif } unsigned nLoopCount=0; bool bNoMoreLoop = false; long nXDiff0=0x7FFFFFFF; long nWantWdt=rShapeSize.Width(); long nIsWdt=rTextSize.Width(); if (nIsWdt==0) nIsWdt=1; long nWantHgt=rShapeSize.Height(); long nIsHgt=rTextSize.Height(); if (nIsHgt==0) nIsHgt=1; long nXTolPl=nWantWdt/100; // tolerance: +1% long nXTolMi=nWantWdt/25; // tolerance: -4% long nXKorr =nWantWdt/20; // correction scale: 5% long nX=(nWantWdt*100) /nIsWdt; // calculate X stretching long nY=(nWantHgt*100) /nIsHgt; // calculate Y stretching bool bChkX = true; if (bNoStretching) { // might only be be possible proportionally if (nX>nY) { nX=nY; bChkX=false; } else { nY=nX; } } while (nLoopCount<5 && !bNoMoreLoop) { if (nX<0) nX=-nX; if (nX<1) { nX=1; bNoMoreLoop = true; } if (nX>65535) { nX=65535; bNoMoreLoop = true; } if (nY<0) nY=-nY; if (nY<1) { nY=1; bNoMoreLoop = true; } if (nY>65535) { nY=65535; bNoMoreLoop = true; } // exception, there is no text yet (horizontal case) if(nIsWdt <= 1) { nX = nY; bNoMoreLoop = true; } // exception, there is no text yet (vertical case) if(nIsHgt <= 1) { nY = nX; bNoMoreLoop = true; } rOutliner.SetGlobalCharStretching((sal_uInt16)nX,(sal_uInt16)nY); nLoopCount++; Size aSiz(rOutliner.CalcTextSize()); long nXDiff=aSiz.Width()-nWantWdt; rFitXKorreg=Fraction(nWantWdt,aSiz.Width()); if (((nXDiff>=nXTolMi || !bChkX) && nXDiff<=nXTolPl) || nXDiff==nXDiff0) { bNoMoreLoop = true; } else { // correct stretching factors long nMul=nWantWdt; long nDiv=aSiz.Width(); if (std::abs(nXDiff)<=2*nXKorr) { if (nMul>nDiv) nDiv+=(nMul-nDiv)/2; // but only add half of what we calculated, else nMul+=(nDiv-nMul)/2; // because the EditEngine calculates wrongly later on } nX=nX*nMul/nDiv; if (bNoStretching) nY=nX; } nXDiff0=nXDiff; } } OUString SdrTextObj::TakeObjNameSingul() const { OUString aStr; switch(eTextKind) { case OBJ_OUTLINETEXT: { aStr = ImpGetResStr(STR_ObjNameSingulOUTLINETEXT); break; } case OBJ_TITLETEXT : { aStr = ImpGetResStr(STR_ObjNameSingulTITLETEXT); break; } default: { if(IsLinkedText()) aStr = ImpGetResStr(STR_ObjNameSingulTEXTLNK); else aStr = ImpGetResStr(STR_ObjNameSingulTEXT); break; } } OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject(); if(pOutlinerParaObject && eTextKind != OBJ_OUTLINETEXT) { // shouldn't currently cause any problems at OUTLINETEXT OUString aStr2(comphelper::string::stripStart(pOutlinerParaObject->GetTextObject().GetText(0), ' ')); // avoid non expanded text portions in object name // (second condition is new) if(!aStr2.isEmpty() && aStr2.indexOf(sal_Unicode(255)) == -1) { // space between ResStr and content text aStr += " "; aStr += "\'"; if(aStr2.getLength() > 10) { aStr2 = aStr2.copy(0, 8); aStr2 += "..."; } aStr += aStr2; aStr += "\'"; } } OUStringBuffer sName(aStr); OUString aName(GetName()); if (!aName.isEmpty()) { sName.append(' '); sName.append('\''); sName.append(aName); sName.append('\''); } return sName.makeStringAndClear(); } OUString SdrTextObj::TakeObjNamePlural() const { OUString sName; switch (eTextKind) { case OBJ_OUTLINETEXT: sName=ImpGetResStr(STR_ObjNamePluralOUTLINETEXT); break; case OBJ_TITLETEXT : sName=ImpGetResStr(STR_ObjNamePluralTITLETEXT); break; default: { if (IsLinkedText()) { sName=ImpGetResStr(STR_ObjNamePluralTEXTLNK); } else { sName=ImpGetResStr(STR_ObjNamePluralTEXT); } } break; } // switch return sName; } SdrTextObj* SdrTextObj::Clone() const { return CloneHelper< SdrTextObj >(); } SdrTextObj& SdrTextObj::operator=(const SdrTextObj& rObj) { if( this == &rObj ) return *this; // call parent SdrObject::operator=(rObj); aRect =rObj.aRect; aGeo =rObj.aGeo; eTextKind =rObj.eTextKind; bTextFrame=rObj.bTextFrame; aTextSize=rObj.aTextSize; bTextSizeDirty=rObj.bTextSizeDirty; // Not all of the necessary parameters were copied yet. bNoShear = rObj.bNoShear; bNoRotate = rObj.bNoRotate; bNoMirror = rObj.bNoMirror; bDisableAutoWidthOnDragging = rObj.bDisableAutoWidthOnDragging; OutlinerParaObject* pNewOutlinerParaObject = 0; SdrText* pText = getActiveText(); if( pText && rObj.HasText() ) { const Outliner* pEO=rObj.pEdtOutl; if (pEO!=NULL) { pNewOutlinerParaObject = pEO->CreateParaObject(); } else { pNewOutlinerParaObject = new OutlinerParaObject(*rObj.getActiveText()->GetOutlinerParaObject()); } } mpText->SetOutlinerParaObject( pNewOutlinerParaObject ); ImpSetTextStyleSheetListeners(); return *this; } basegfx::B2DPolyPolygon SdrTextObj::TakeXorPoly() const { Polygon aPol(aRect); if (aGeo.nShearWink!=0) ShearPoly(aPol,aRect.TopLeft(),aGeo.nTan); if (aGeo.nDrehWink!=0) RotatePoly(aPol,aRect.TopLeft(),aGeo.nSin,aGeo.nCos); basegfx::B2DPolyPolygon aRetval; aRetval.append(aPol.getB2DPolygon()); return aRetval; } basegfx::B2DPolyPolygon SdrTextObj::TakeContour() const { basegfx::B2DPolyPolygon aRetval(SdrAttrObj::TakeContour()); // and now add the BoundRect of the text, if necessary if ( pModel && GetOutlinerParaObject() && !IsFontwork() && !IsContourTextFrame() ) { // using Clone()-Paint() strategy inside TakeContour() leaves a destroyed // SdrObject as pointer in DrawOutliner. Set *this again in fetching the outliner // in every case SdrOutliner& rOutliner=ImpGetDrawOutliner(); Rectangle aAnchor2; Rectangle aR; TakeTextRect(rOutliner,aR,false,&aAnchor2); rOutliner.Clear(); bool bFitToSize(IsFitToSize()); if (bFitToSize) aR=aAnchor2; Polygon aPol(aR); if (aGeo.nDrehWink!=0) RotatePoly(aPol,aR.TopLeft(),aGeo.nSin,aGeo.nCos); aRetval.append(aPol.getB2DPolygon()); } return aRetval; } void SdrTextObj::RecalcSnapRect() { if (aGeo.nDrehWink!=0 || aGeo.nShearWink!=0) { Polygon aPol(aRect); if (aGeo.nShearWink!=0) ShearPoly(aPol,aRect.TopLeft(),aGeo.nTan); if (aGeo.nDrehWink!=0) RotatePoly(aPol,aRect.TopLeft(),aGeo.nSin,aGeo.nCos); maSnapRect=aPol.GetBoundRect(); } else { maSnapRect=aRect; } } sal_uInt32 SdrTextObj::GetSnapPointCount() const { return 4L; } Point SdrTextObj::GetSnapPoint(sal_uInt32 i) const { Point aP; switch (i) { case 0: aP=aRect.TopLeft(); break; case 1: aP=aRect.TopRight(); break; case 2: aP=aRect.BottomLeft(); break; case 3: aP=aRect.BottomRight(); break; default: aP=aRect.Center(); break; } if (aGeo.nShearWink!=0) ShearPoint(aP,aRect.TopLeft(),aGeo.nTan); if (aGeo.nDrehWink!=0) RotatePoint(aP,aRect.TopLeft(),aGeo.nSin,aGeo.nCos); return aP; } void SdrTextObj::ImpCheckMasterCachable() { bNotMasterCachable=false; OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject(); if(!bNotVisibleAsMaster && pOutlinerParaObject && pOutlinerParaObject->IsEditDoc() ) { const EditTextObject& rText= pOutlinerParaObject->GetTextObject(); bNotMasterCachable=rText.HasField(SvxPageField::StaticClassId()); if( !bNotMasterCachable ) { bNotMasterCachable=rText.HasField(SvxHeaderField::StaticClassId()); if( !bNotMasterCachable ) { bNotMasterCachable=rText.HasField(SvxFooterField::StaticClassId()); if( !bNotMasterCachable ) { bNotMasterCachable=rText.HasField(SvxDateTimeField::StaticClassId()); } } } } } // Extracted from ImpGetDrawOutliner() void SdrTextObj::ImpInitDrawOutliner( SdrOutliner& rOutl ) const { rOutl.SetUpdateMode(false); sal_uInt16 nOutlinerMode = OUTLINERMODE_OUTLINEOBJECT; if ( !IsOutlText() ) nOutlinerMode = OUTLINERMODE_TEXTOBJECT; rOutl.Init( nOutlinerMode ); rOutl.SetGlobalCharStretching(100,100); sal_uIntPtr nStat=rOutl.GetControlWord(); nStat&=~(EE_CNTRL_STRETCHING|EE_CNTRL_AUTOPAGESIZE); rOutl.SetControlWord(nStat); Size aNullSize; Size aMaxSize(100000,100000); rOutl.SetMinAutoPaperSize(aNullSize); rOutl.SetMaxAutoPaperSize(aMaxSize); rOutl.SetPaperSize(aMaxSize); rOutl.ClearPolygon(); } SdrOutliner& SdrTextObj::ImpGetDrawOutliner() const { SdrOutliner& rOutl=pModel->GetDrawOutliner(this); // Code extracted to ImpInitDrawOutliner() ImpInitDrawOutliner( rOutl ); return rOutl; } // Extracted from Paint() void SdrTextObj::ImpSetupDrawOutlinerForPaint( bool bContourFrame, SdrOutliner& rOutliner, Rectangle& rTextRect, Rectangle& rAnchorRect, Rectangle& rPaintRect, Fraction& rFitXKorreg ) const { if (!bContourFrame) { // FitToSize can't be used together with ContourFrame for now if (IsFitToSize() || IsAutoFit()) { sal_uIntPtr nStat=rOutliner.GetControlWord(); nStat|=EE_CNTRL_STRETCHING|EE_CNTRL_AUTOPAGESIZE; rOutliner.SetControlWord(nStat); } } rOutliner.SetFixedCellHeight(((const SdrTextFixedCellHeightItem&)GetMergedItem(SDRATTR_TEXT_USEFIXEDCELLHEIGHT)).GetValue()); TakeTextRect(rOutliner, rTextRect, false, &rAnchorRect); rPaintRect = rTextRect; if (!bContourFrame) { // FitToSize can't be used together with ContourFrame for now if (IsFitToSize()) { ImpSetCharStretching(rOutliner,rTextRect.GetSize(),rAnchorRect.GetSize(),rFitXKorreg); rPaintRect=rAnchorRect; } else if (IsAutoFit()) { ImpAutoFitText(rOutliner); } } } void SdrTextObj::ImpAutoFitText( SdrOutliner& rOutliner ) const { const Size aShapeSize=GetSnapRect().GetSize(); ImpAutoFitText( rOutliner, Size(aShapeSize.Width()-GetTextLeftDistance()-GetTextRightDistance(), aShapeSize.Height()-GetTextUpperDistance()-GetTextLowerDistance()), IsVerticalWriting() ); } void SdrTextObj::ImpAutoFitText( SdrOutliner& rOutliner, const Size& rTextSize, bool bIsVerticalWriting ) { // EditEngine formatting is unstable enough for // line-breaking text that we need some more samples // loop early-exits if we detect an already attained value sal_uInt16 nMinStretchX=0, nMinStretchY=0; sal_uInt16 aOldStretchXVals[]={0,0,0,0,0,0,0,0,0,0}; const size_t aStretchArySize=SAL_N_ELEMENTS(aOldStretchXVals); for(unsigned int i=0; i= 1.0 ) { // resulting text area fits into available shape rect - // err on the larger stretching, to optimally fill area nMinStretchX = std::max(nMinStretchX,nCurrStretchX); nMinStretchY = std::max(nMinStretchY,nCurrStretchY); } aOldStretchXVals[i] = nCurrStretchX; if( std::find(aOldStretchXVals, aOldStretchXVals+i, nCurrStretchX) != aOldStretchXVals+i ) break; // same value already attained once; algo is looping, exit if (fFactor < 1.0 || (fFactor >= 1.0 && nCurrStretchX != 100)) { nCurrStretchX = sal::static_int_cast(nCurrStretchX*fFactor); nCurrStretchY = sal::static_int_cast(nCurrStretchY*fFactor); rOutliner.SetGlobalCharStretching(std::min(sal_uInt16(100),nCurrStretchX), std::min(sal_uInt16(100),nCurrStretchY)); OSL_TRACE("SdrTextObj::onEditOutlinerStatusEvent(): zoom is %d", nCurrStretchX); } } OSL_TRACE("---- SdrTextObj::onEditOutlinerStatusEvent(): final zoom is %d ----", nMinStretchX); rOutliner.SetGlobalCharStretching(std::min(sal_uInt16(100),nMinStretchX), std::min(sal_uInt16(100),nMinStretchY)); } void SdrTextObj::SetupOutlinerFormatting( SdrOutliner& rOutl, Rectangle& rPaintRect ) const { ImpInitDrawOutliner( rOutl ); UpdateOutlinerFormatting( rOutl, rPaintRect ); } void SdrTextObj::UpdateOutlinerFormatting( SdrOutliner& rOutl, Rectangle& rPaintRect ) const { Rectangle aTextRect; Rectangle aAnchorRect; Fraction aFitXKorreg(1,1); bool bContourFrame=IsContourTextFrame(); if( GetModel() ) { MapMode aMapMode(GetModel()->GetScaleUnit(), Point(0,0), GetModel()->GetScaleFraction(), GetModel()->GetScaleFraction()); rOutl.SetRefMapMode(aMapMode); } ImpSetupDrawOutlinerForPaint( bContourFrame, rOutl, aTextRect, aAnchorRect, rPaintRect, aFitXKorreg ); } OutlinerParaObject* SdrTextObj::GetOutlinerParaObject() const { SdrText* pText = getActiveText(); if( pText ) return pText->GetOutlinerParaObject(); else return 0; } void SdrTextObj::NbcSetOutlinerParaObject(OutlinerParaObject* pTextObject) { NbcSetOutlinerParaObjectForText( pTextObject, getActiveText() ); } void SdrTextObj::NbcSetOutlinerParaObjectForText( OutlinerParaObject* pTextObject, SdrText* pText ) { if( pText ) pText->SetOutlinerParaObject( pTextObject ); if (pText && pText->GetOutlinerParaObject()) { SvxWritingModeItem aWritingMode(pText->GetOutlinerParaObject()->IsVertical() ? com::sun::star::text::WritingMode_TB_RL : com::sun::star::text::WritingMode_LR_TB, SDRATTR_TEXTDIRECTION); GetProperties().SetObjectItemDirect(aWritingMode); } SetTextSizeDirty(); if (IsTextFrame() && (IsAutoGrowHeight() || IsAutoGrowWidth())) { // adapt text frame! NbcAdjustTextFrameWidthAndHeight(); } if (!IsTextFrame()) { // the SnapRect keeps its size SetRectsDirty(true); } // always invalidate BoundRect on change SetBoundRectDirty(); ActionChanged(); ImpSetTextStyleSheetListeners(); ImpCheckMasterCachable(); } void SdrTextObj::NbcReformatText() { SdrText* pText = getActiveText(); if( pText && pText->GetOutlinerParaObject() ) { pText->ReformatText(); if (bTextFrame) { NbcAdjustTextFrameWidthAndHeight(); } else { // the SnapRect keeps its size SetBoundRectDirty(); SetRectsDirty(true); } SetTextSizeDirty(); ActionChanged(); // i22396 // Necessary here since we have no compare operator at the outliner // para object which may detect changes regarding the combination // of outliner para data and configuration (e.g., change of // formatting of text numerals) GetViewContact().flushViewObjectContacts(false); } } void SdrTextObj::ReformatText() { if(GetOutlinerParaObject()) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); NbcReformatText(); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } } SdrObjGeoData* SdrTextObj::NewGeoData() const { return new SdrTextObjGeoData; } void SdrTextObj::SaveGeoData(SdrObjGeoData& rGeo) const { SdrAttrObj::SaveGeoData(rGeo); SdrTextObjGeoData& rTGeo=(SdrTextObjGeoData&)rGeo; rTGeo.aRect =aRect; rTGeo.aGeo =aGeo; } void SdrTextObj::RestGeoData(const SdrObjGeoData& rGeo) { // RectsDirty is called by SdrObject SdrAttrObj::RestGeoData(rGeo); SdrTextObjGeoData& rTGeo=(SdrTextObjGeoData&)rGeo; NbcSetLogicRect(rTGeo.aRect); aGeo =rTGeo.aGeo; SetTextSizeDirty(); } SdrFitToSizeType SdrTextObj::GetFitToSize() const { SdrFitToSizeType eType = SDRTEXTFIT_NONE; if(!IsAutoGrowWidth()) eType = ((SdrTextFitToSizeTypeItem&)(GetObjectItem(SDRATTR_TEXT_FITTOSIZE))).GetValue(); return eType; } void SdrTextObj::ForceOutlinerParaObject() { SdrText* pText = getActiveText(); if( pText && (pText->GetOutlinerParaObject() == 0) ) { sal_uInt16 nOutlMode = OUTLINERMODE_TEXTOBJECT; if( IsTextFrame() && eTextKind == OBJ_OUTLINETEXT ) nOutlMode = OUTLINERMODE_OUTLINEOBJECT; pText->ForceOutlinerParaObject( nOutlMode ); } } bool SdrTextObj::IsVerticalWriting() const { if(pEdtOutl) { return pEdtOutl->IsVertical(); } OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject(); if(pOutlinerParaObject) { return pOutlinerParaObject->IsVertical(); } return false; } void SdrTextObj::SetVerticalWriting(bool bVertical) { OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject(); if( !pOutlinerParaObject && bVertical ) { // we only need to force a outliner para object if the default of // horizontal text is changed ForceOutlinerParaObject(); pOutlinerParaObject = GetOutlinerParaObject(); } if( pOutlinerParaObject && (pOutlinerParaObject->IsVertical() != (bool)bVertical) ) { // get item settings const SfxItemSet& rSet = GetObjectItemSet(); bool bAutoGrowWidth = ((SdrOnOffItem&)rSet.Get(SDRATTR_TEXT_AUTOGROWWIDTH)).GetValue(); bool bAutoGrowHeight = ((SdrOnOffItem&)rSet.Get(SDRATTR_TEXT_AUTOGROWHEIGHT)).GetValue(); // Also exchange hor/ver adjust items SdrTextHorzAdjust eHorz = ((SdrTextHorzAdjustItem&)(rSet.Get(SDRATTR_TEXT_HORZADJUST))).GetValue(); SdrTextVertAdjust eVert = ((SdrTextVertAdjustItem&)(rSet.Get(SDRATTR_TEXT_VERTADJUST))).GetValue(); // rescue object size Rectangle aObjectRect = GetSnapRect(); // prepare ItemSet to set exchanged width and height items SfxItemSet aNewSet(*rSet.GetPool(), SDRATTR_TEXT_AUTOGROWHEIGHT, SDRATTR_TEXT_AUTOGROWHEIGHT, // Expanded item ranges to also support hor and ver adjust. SDRATTR_TEXT_VERTADJUST, SDRATTR_TEXT_VERTADJUST, SDRATTR_TEXT_AUTOGROWWIDTH, SDRATTR_TEXT_HORZADJUST, 0, 0); aNewSet.Put(rSet); aNewSet.Put(makeSdrTextAutoGrowWidthItem(bAutoGrowHeight)); aNewSet.Put(makeSdrTextAutoGrowHeightItem(bAutoGrowWidth)); // Exchange horz and vert adjusts switch(eVert) { case SDRTEXTVERTADJUST_TOP: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT)); break; case SDRTEXTVERTADJUST_CENTER: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_CENTER)); break; case SDRTEXTVERTADJUST_BOTTOM: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_LEFT)); break; case SDRTEXTVERTADJUST_BLOCK: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_BLOCK)); break; } switch(eHorz) { case SDRTEXTHORZADJUST_LEFT: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_BOTTOM)); break; case SDRTEXTHORZADJUST_CENTER: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_CENTER)); break; case SDRTEXTHORZADJUST_RIGHT: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_TOP)); break; case SDRTEXTHORZADJUST_BLOCK: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_BLOCK)); break; } SetObjectItemSet(aNewSet); pOutlinerParaObject = GetOutlinerParaObject(); if( pOutlinerParaObject ) { // set ParaObject orientation accordingly pOutlinerParaObject->SetVertical(bVertical); } // restore object size SetSnapRect(aObjectRect); } } // transformation interface for StarOfficeAPI. This implements support for // homogeneous 3x3 matrices containing the transformation of the SdrObject. At the // moment it contains a shearX, rotation and translation, but for setting all linear // transforms like Scale, ShearX, ShearY, Rotate and Translate are supported. // gets base transformation and rectangle of object. If it's an SdrPathObj it fills the PolyPolygon // with the base geometry and returns TRUE. Otherwise it returns FALSE. bool SdrTextObj::TRGetBaseGeometry(basegfx::B2DHomMatrix& rMatrix, basegfx::B2DPolyPolygon& /*rPolyPolygon*/) const { // get turn and shear double fRotate = (aGeo.nDrehWink / 100.0) * F_PI180; double fShearX = (aGeo.nShearWink / 100.0) * F_PI180; // get aRect, this is the unrotated snaprect Rectangle aRectangle(aRect); // fill other values basegfx::B2DTuple aScale(aRectangle.GetWidth(), aRectangle.GetHeight()); basegfx::B2DTuple aTranslate(aRectangle.Left(), aRectangle.Top()); // position maybe relative to anchorpos, convert if( pModel && pModel->IsWriter() ) { if(GetAnchorPos().X() || GetAnchorPos().Y()) { aTranslate -= basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y()); } } // force MapUnit to 100th mm const SfxMapUnit eMapUnit(GetObjectMapUnit()); if(eMapUnit != SFX_MAPUNIT_100TH_MM) { switch(eMapUnit) { case SFX_MAPUNIT_TWIP : { // position aTranslate.setX(ImplTwipsToMM(aTranslate.getX())); aTranslate.setY(ImplTwipsToMM(aTranslate.getY())); // size aScale.setX(ImplTwipsToMM(aScale.getX())); aScale.setY(ImplTwipsToMM(aScale.getY())); break; } default: { OSL_FAIL("TRGetBaseGeometry: Missing unit translation to 100th mm!"); } } } // build matrix rMatrix = basegfx::tools::createScaleShearXRotateTranslateB2DHomMatrix( aScale, basegfx::fTools::equalZero(fShearX) ? 0.0 : tan(fShearX), basegfx::fTools::equalZero(fRotate) ? 0.0 : -fRotate, aTranslate); return false; } // sets the base geometry of the object using infos contained in the homogeneous 3x3 matrix. // If it's an SdrPathObj it will use the provided geometry information. The Polygon has // to use (0,0) as upper left and will be scaled to the given size in the matrix. void SdrTextObj::TRSetBaseGeometry(const basegfx::B2DHomMatrix& rMatrix, const basegfx::B2DPolyPolygon& /*rPolyPolygon*/) { // break up matrix basegfx::B2DTuple aScale; basegfx::B2DTuple aTranslate; double fRotate(0.0); double fShearX(0.0); rMatrix.decompose(aScale, aTranslate, fRotate, fShearX); // #i75086# Old DrawingLayer (GeoStat and geometry) does not support holding negative scalings // in X and Y which equal a 180 degree rotation. Recognize it and react accordingly if(basegfx::fTools::less(aScale.getX(), 0.0) && basegfx::fTools::less(aScale.getY(), 0.0)) { aScale.setX(fabs(aScale.getX())); aScale.setY(fabs(aScale.getY())); fRotate = fmod(fRotate + F_PI, F_2PI); } // reset object shear and rotations aGeo.nDrehWink = 0; aGeo.RecalcSinCos(); aGeo.nShearWink = 0; aGeo.RecalcTan(); // force metric to pool metric const SfxMapUnit eMapUnit(GetObjectMapUnit()); if(eMapUnit != SFX_MAPUNIT_100TH_MM) { switch(eMapUnit) { case SFX_MAPUNIT_TWIP : { // position aTranslate.setX(ImplMMToTwips(aTranslate.getX())); aTranslate.setY(ImplMMToTwips(aTranslate.getY())); // size aScale.setX(ImplMMToTwips(aScale.getX())); aScale.setY(ImplMMToTwips(aScale.getY())); break; } default: { OSL_FAIL("TRSetBaseGeometry: Missing unit translation to PoolMetric!"); } } } // if anchor is used, make position relative to it if( pModel && pModel->IsWriter() ) { if(GetAnchorPos().X() || GetAnchorPos().Y()) { aTranslate += basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y()); } } // build and set BaseRect (use scale) Point aPoint = Point(); Size aSize(FRound(aScale.getX()), FRound(aScale.getY())); Rectangle aBaseRect(aPoint, aSize); SetSnapRect(aBaseRect); // shear? if(!basegfx::fTools::equalZero(fShearX)) { GeoStat aGeoStat; aGeoStat.nShearWink = FRound((atan(fShearX) / F_PI180) * 100.0); aGeoStat.RecalcTan(); Shear(Point(), aGeoStat.nShearWink, aGeoStat.nTan, false); } // rotation? if(!basegfx::fTools::equalZero(fRotate)) { GeoStat aGeoStat; // #i78696# // fRotate is matematically correct, but aGeoStat.nDrehWink is // mirrored -> mirror value here aGeoStat.nDrehWink = NormAngle360(FRound(-fRotate / F_PI18000)); aGeoStat.RecalcSinCos(); Rotate(Point(), aGeoStat.nDrehWink, aGeoStat.nSin, aGeoStat.nCos); } // translate? if(!aTranslate.equalZero()) { Move(Size(FRound(aTranslate.getX()), FRound(aTranslate.getY()))); } } bool SdrTextObj::IsRealyEdited() const { return pEdtOutl && pEdtOutl->IsModified(); } // moved inlines here form hxx long SdrTextObj::GetEckenradius() const { return ((SdrMetricItem&)(GetObjectItemSet().Get(SDRATTR_ECKENRADIUS))).GetValue(); } long SdrTextObj::GetMinTextFrameHeight() const { return ((SdrMetricItem&)(GetObjectItemSet().Get(SDRATTR_TEXT_MINFRAMEHEIGHT))).GetValue(); } long SdrTextObj::GetMaxTextFrameHeight() const { return ((SdrMetricItem&)(GetObjectItemSet().Get(SDRATTR_TEXT_MAXFRAMEHEIGHT))).GetValue(); } long SdrTextObj::GetMinTextFrameWidth() const { return ((SdrMetricItem&)(GetObjectItemSet().Get(SDRATTR_TEXT_MINFRAMEWIDTH))).GetValue(); } long SdrTextObj::GetMaxTextFrameWidth() const { return ((SdrMetricItem&)(GetObjectItemSet().Get(SDRATTR_TEXT_MAXFRAMEWIDTH))).GetValue(); } bool SdrTextObj::IsFontwork() const { return (bTextFrame) ? false // Default is FALSE : ((XFormTextStyleItem&)(GetObjectItemSet().Get(XATTR_FORMTXTSTYLE))).GetValue()!=XFT_NONE; } bool SdrTextObj::IsHideContour() const { return (bTextFrame) ? false // Default is: no, don't HideContour; HideContour not together with TextFrames : ((XFormTextHideFormItem&)(GetObjectItemSet().Get(XATTR_FORMTXTHIDEFORM))).GetValue(); } bool SdrTextObj::IsContourTextFrame() const { return (bTextFrame) ? false // ContourFrame not together with normal TextFrames : ((SdrOnOffItem&)(GetObjectItemSet().Get(SDRATTR_TEXT_CONTOURFRAME))).GetValue(); } long SdrTextObj::GetTextLeftDistance() const { return ((SdrMetricItem&)(GetObjectItemSet().Get(SDRATTR_TEXT_LEFTDIST))).GetValue(); } long SdrTextObj::GetTextRightDistance() const { return ((SdrMetricItem&)(GetObjectItemSet().Get(SDRATTR_TEXT_RIGHTDIST))).GetValue(); } long SdrTextObj::GetTextUpperDistance() const { return ((SdrMetricItem&)(GetObjectItemSet().Get(SDRATTR_TEXT_UPPERDIST))).GetValue(); } long SdrTextObj::GetTextLowerDistance() const { return ((SdrMetricItem&)(GetObjectItemSet().Get(SDRATTR_TEXT_LOWERDIST))).GetValue(); } SdrTextAniKind SdrTextObj::GetTextAniKind() const { return ((SdrTextAniKindItem&)(GetObjectItemSet().Get(SDRATTR_TEXT_ANIKIND))).GetValue(); } SdrTextAniDirection SdrTextObj::GetTextAniDirection() const { return ((SdrTextAniDirectionItem&)(GetObjectItemSet().Get(SDRATTR_TEXT_ANIDIRECTION))).GetValue(); } // Get necessary data for text scroll animation. ATM base it on a Text-Metafile and a // painting rectangle. Rotation is excluded from the returned values. GDIMetaFile* SdrTextObj::GetTextScrollMetaFileAndRectangle( Rectangle& rScrollRectangle, Rectangle& rPaintRectangle) { GDIMetaFile* pRetval = 0L; SdrOutliner& rOutliner = ImpGetDrawOutliner(); Rectangle aTextRect; Rectangle aAnchorRect; Rectangle aPaintRect; Fraction aFitXKorreg(1,1); bool bContourFrame(IsContourTextFrame()); // get outliner set up. To avoid getting a somehow rotated MetaFile, // temporarily disable object rotation. sal_Int32 nAngle(aGeo.nDrehWink); aGeo.nDrehWink = 0L; ImpSetupDrawOutlinerForPaint( bContourFrame, rOutliner, aTextRect, aAnchorRect, aPaintRect, aFitXKorreg ); aGeo.nDrehWink = nAngle; Rectangle aScrollFrameRect(aPaintRect); const SfxItemSet& rSet = GetObjectItemSet(); SdrTextAniDirection eDirection = ((SdrTextAniDirectionItem&)(rSet.Get(SDRATTR_TEXT_ANIDIRECTION))).GetValue(); if(SDRTEXTANI_LEFT == eDirection || SDRTEXTANI_RIGHT == eDirection) { aScrollFrameRect.Left() = aAnchorRect.Left(); aScrollFrameRect.Right() = aAnchorRect.Right(); } if(SDRTEXTANI_UP == eDirection || SDRTEXTANI_DOWN == eDirection) { aScrollFrameRect.Top() = aAnchorRect.Top(); aScrollFrameRect.Bottom() = aAnchorRect.Bottom(); } // create the MetaFile pRetval = new GDIMetaFile; VirtualDevice aBlackHole; aBlackHole.EnableOutput(false); pRetval->Record(&aBlackHole); Point aPaintPos = aPaintRect.TopLeft(); rOutliner.Draw(&aBlackHole, aPaintPos); pRetval->Stop(); pRetval->WindStart(); // return PaintRectanglePixel and pRetval; rScrollRectangle = aScrollFrameRect; rPaintRectangle = aPaintRect; return pRetval; } // Access to TextAnimationAllowed flag bool SdrTextObj::IsAutoFit() const { return GetFitToSize()==SDRTEXTFIT_AUTOFIT; } bool SdrTextObj::IsFitToSize() const { const SdrFitToSizeType eFit=GetFitToSize(); return (eFit==SDRTEXTFIT_PROPORTIONAL || eFit==SDRTEXTFIT_ALLLINES); } void SdrTextObj::SetTextAnimationAllowed(bool bNew) { if(mbTextAnimationAllowed != bNew) { mbTextAnimationAllowed = bNew; ActionChanged(); } } /** called from the SdrObjEditView during text edit when the status of the edit outliner changes */ void SdrTextObj::onEditOutlinerStatusEvent( EditStatus* pEditStatus ) { const sal_uInt32 nStat = pEditStatus->GetStatusWord(); const bool bGrowX=(nStat & EE_STAT_TEXTWIDTHCHANGED) !=0; const bool bGrowY=(nStat & EE_STAT_TEXTHEIGHTCHANGED) !=0; if(bTextFrame && (bGrowX || bGrowY)) { if ((bGrowX && IsAutoGrowWidth()) || (bGrowY && IsAutoGrowHeight())) { AdjustTextFrameWidthAndHeight(); } else if (IsAutoFit() && !mbInDownScale) { assert(pEdtOutl); mbInDownScale = true; // sucks that we cannot disable paints via // pEdtOutl->SetUpdateMode(FALSE) - but EditEngine skips // formatting as well, then. ImpAutoFitText(*pEdtOutl); mbInDownScale = false; } } } /** returns the currently active text. */ SdrText* SdrTextObj::getActiveText() const { if( !mpText ) return getText( 0 ); else return mpText; } /** returns the nth available text. */ SdrText* SdrTextObj::getText( sal_Int32 nIndex ) const { if( nIndex == 0 ) { if( mpText == 0 ) const_cast< SdrTextObj* >(this)->mpText = new SdrText( *(const_cast< SdrTextObj* >(this)) ); return mpText; } else { return 0; } } /** returns the number of texts available for this object. */ sal_Int32 SdrTextObj::getTextCount() const { return 1; } /** changes the current active text */ void SdrTextObj::setActiveText( sal_Int32 /*nIndex*/ ) { } /** returns the index of the text that contains the given point or -1 */ sal_Int32 SdrTextObj::CheckTextHit(const Point& /*rPnt*/) const { return 0; } void SdrTextObj::SetObjectItemNoBroadcast(const SfxPoolItem& rItem) { static_cast< sdr::properties::TextProperties& >(GetProperties()).SetObjectItemNoBroadcast(rItem); } // The concept of the text object: // ~~~~~~~~~~~~~~~~~~~~~~~~ // Attributes/Variations: // - bool text frame / graphics object with caption // - bool FontWork (if it is not a text frame and not a ContourTextFrame) // - bool ContourTextFrame (if it is not a text frame and not Fontwork) // - long rotation angle (if it is not FontWork) // - long text frame margins (if it is not FontWork) // - bool FitToSize (if it is not FontWork) // - bool AutoGrowingWidth/Height (if it is not FitToSize and not FontWork) // - long Min/MaxFrameWidth/Height (if AutoGrowingWidth/Height) // - enum horizontal text anchoring left,center,right,justify/block,Stretch(ni) // - enum vertical text anchoring top, middle, bottom, block, stretch(ni) // - enum ticker text (if it is not FontWork) // Every derived object is either a text frame (bTextFrame=true) // or a drawing object with a caption (bTextFrame=false). // Default anchoring for text frames: // SDRTEXTHORZADJUST_BLOCK, SDRTEXTVERTADJUST_TOP // = static Pool defaults // Default anchoring for drawing objects with a caption: // SDRTEXTHORZADJUST_CENTER, SDRTEXTVERTADJUST_CENTER // via "hard" attribution of SdrAttrObj // Every object derived from SdrTextObj must return an "UnrotatedSnapRect" // (->TakeUnrotatedSnapRect()) (the reference point for the rotation is the top // left of the rectangle (aGeo.nDrehWink)) which is the basis for anchoring // text. We then subtract the text frame margins from this rectangle, as a re- // sult we get the anchoring area (->TakeTextAnchorRect()). Within this area, we // calculate the anchoring point and the painting area, depending on the hori- // zontal and vertical adjustment of the text (SdrTextVertAdjust, // SdrTextHorzAdjust). // In the case of drawing objects with a caption the painting area might well // be larger than the anchoring area, for text frames on the other hand, it is // always of the same or a smaller size (except when there are negative text // frame margins). // FitToSize takes priority over text anchoring and AutoGrowHeight/Width. When // FitToSize is turned on, the painting area is always equal to the anchoring // area. Additionally, FitToSize doesn't allow automatic line breaks. // ContourTextFrame: // - long rotation angle // - long text frame margins (maybe later) // - bool FitToSize (maybe later) // - bool AutoGrowingWidth/Height (maybe much later) // - long Min/MaxFrameWidth/Height (maybe much later) // - enum horizontal text anchoring (maybe later, for now: left, centered) // - enum vertical text anchoring (maybe later, for now: top) // - enum ticker text (maybe later, maybe even with correct clipping) // When making changes, check these: // - Paint // - HitTest // - ConvertToPoly // - Edit // - Printing, Saving, Painting in neighboring View while editing // - ModelChanged (e. g. through a neighboring View or rulers) while editing // - FillColorChanged while editin // - and many more... /* vim:set shiftwidth=4 softtabstop=4 expandtab: */