/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <sal/config.h>

#include <string_view>

#include <svtools/toolbarmenu.hxx>
#include <vcl/toolbox.hxx>

#include <svx/strings.hrc>
#include <svx/svdtrans.hxx>
#include <svx/dialmgr.hxx>

#include <helpids.h>
#include "extrusioncontrols.hxx"
#include <extrusiondepthdialog.hxx>

#include <bitmaps.hlst>

using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::lang;
using namespace ::com::sun::star::beans;
using namespace ::com::sun::star::util;
using namespace ::com::sun::star::graphic;

namespace svx
{

const sal_Int32 gSkewList[] = { 135, 90, 45, 180, 0, -360, -135, -90, -45 };
constexpr OUStringLiteral g_sExtrusionDirection = u".uno:ExtrusionDirection";
constexpr OUStringLiteral g_sExtrusionProjection = u".uno:ExtrusionProjection";

const std::u16string_view aLightOffBmps[] =
{
    u"" RID_SVXBMP_LIGHT_OFF_FROM_TOP_LEFT,
    u"" RID_SVXBMP_LIGHT_OFF_FROM_TOP,
    u"" RID_SVXBMP_LIGHT_OFF_FROM_TOP_RIGHT,
    u"" RID_SVXBMP_LIGHT_OFF_FROM_LEFT,
    u"",
    u"" RID_SVXBMP_LIGHT_OFF_FROM_RIGHT,
    u"" RID_SVXBMP_LIGHT_OFF_FROM_BOTTOM_LEFT,
    u"" RID_SVXBMP_LIGHT_OFF_FROM_BOTTOM,
    u"" RID_SVXBMP_LIGHT_OFF_FROM_BOTTOM_RIGHT
};

const std::u16string_view aLightOnBmps[] =
{
    u"" RID_SVXBMP_LIGHT_ON_FROM_TOP_LEFT,
    u"" RID_SVXBMP_LIGHT_ON_FROM_TOP,
    u"" RID_SVXBMP_LIGHT_ON_FROM_TOP_RIGHT,
    u"" RID_SVXBMP_LIGHT_ON_FROM_LEFT,
    u"",
    u"" RID_SVXBMP_LIGHT_ON_FROM_RIGHT,
    u"" RID_SVXBMP_LIGHT_ON_FROM_BOTTOM_LEFT,
    u"" RID_SVXBMP_LIGHT_ON_FROM_BOTTOM,
    u"" RID_SVXBMP_LIGHT_ON_FROM_BOTTOM_RIGHT
};

const std::u16string_view aLightPreviewBmps[] =
{
    u"" RID_SVXBMP_LIGHT_PREVIEW_FROM_TOP_LEFT,
    u"" RID_SVXBMP_LIGHT_PREVIEW_FROM_TOP,
    u"" RID_SVXBMP_LIGHT_PREVIEW_FROM_TOP_RIGHT,
    u"" RID_SVXBMP_LIGHT_PREVIEW_FROM_LEFT,
    u"" RID_SVXBMP_LIGHT_PREVIEW_FROM_RIGHT,
    u"" RID_SVXBMP_LIGHT_PREVIEW_FROM_FRONT,
    u"" RID_SVXBMP_LIGHT_PREVIEW_FROM_BOTTOM_LEFT,
    u"" RID_SVXBMP_LIGHT_PREVIEW_FROM_BOTTOM,
    u"" RID_SVXBMP_LIGHT_PREVIEW_FROM_BOTTOM_RIGHT
};

const std::u16string_view aDirectionBmps[] =
{
    u"" RID_SVXBMP_DIRECTION_DIRECTION_NW,
    u"" RID_SVXBMP_DIRECTION_DIRECTION_N,
    u"" RID_SVXBMP_DIRECTION_DIRECTION_NE,
    u"" RID_SVXBMP_DIRECTION_DIRECTION_W,
    u"" RID_SVXBMP_DIRECTION_DIRECTION_NONE,
    u"" RID_SVXBMP_DIRECTION_DIRECTION_E,
    u"" RID_SVXBMP_DIRECTION_DIRECTION_SW,
    u"" RID_SVXBMP_DIRECTION_DIRECTION_S,
    u"" RID_SVXBMP_DIRECTION_DIRECTION_SE
};

static TranslateId aDirectionStrs[] =
{
    RID_SVXSTR_DIRECTION_NW,
    RID_SVXSTR_DIRECTION_N,
    RID_SVXSTR_DIRECTION_NE,
    RID_SVXSTR_DIRECTION_W,
    RID_SVXSTR_DIRECTION_NONE,
    RID_SVXSTR_DIRECTION_E,
    RID_SVXSTR_DIRECTION_SW,
    RID_SVXSTR_DIRECTION_S,
    RID_SVXSTR_DIRECTION_SE
};

ExtrusionDirectionWindow::ExtrusionDirectionWindow(
    svt::PopupWindowController* pControl,
    weld::Widget* pParent)
    : WeldToolbarPopup(pControl->getFrameInterface(), pParent, "svx/ui/directionwindow.ui", "DirectionWindow")
    , mxControl(pControl)
    , mxDirectionSet(new ValueSet(nullptr))
    , mxDirectionSetWin(new weld::CustomWeld(*m_xBuilder, "valueset", *mxDirectionSet))
    , mxPerspective(m_xBuilder->weld_radio_button("perspective"))
    , mxParallel(m_xBuilder->weld_radio_button("parallel"))
{
    mxDirectionSet->SetStyle(WB_TABSTOP | WB_MENUSTYLEVALUESET | WB_FLATVALUESET | WB_NOBORDER | WB_NO_DIRECTSELECT);

    for (sal_uInt16 i = DIRECTION_NW; i <= DIRECTION_SE; ++i)
    {
        maImgDirection[i] = Image(StockImage::Yes, OUString(aDirectionBmps[i]));
    }

    mxDirectionSet->SetSelectHdl( LINK( this, ExtrusionDirectionWindow, SelectValueSetHdl ) );
    mxDirectionSet->SetColCount( 3 );
    mxDirectionSet->EnableFullItemMode( false );

    for (sal_uInt16 i = DIRECTION_NW; i <= DIRECTION_SE; ++i)
    {
        mxDirectionSet->InsertItem(i + 1, maImgDirection[i], SvxResId(aDirectionStrs[i]));
    }

    Size aSize(72, 72);
    mxDirectionSet->GetDrawingArea()->set_size_request(aSize.Width(), aSize.Height());
    mxDirectionSet->SetOutputSizePixel(aSize);

    mxPerspective->connect_toggled(LINK(this, ExtrusionDirectionWindow, SelectToolbarMenuHdl));

    AddStatusListener( g_sExtrusionDirection );
    AddStatusListener( g_sExtrusionProjection );
}

void ExtrusionDirectionWindow::GrabFocus()
{
    mxDirectionSet->GrabFocus();
}

ExtrusionDirectionWindow::~ExtrusionDirectionWindow()
{
}

void ExtrusionDirectionWindow::implSetDirection( sal_Int32 nSkew, bool bEnabled )
{
    sal_uInt16 nItemId;
    for( nItemId = DIRECTION_NW; nItemId <= DIRECTION_SE; nItemId++ )
    {
        if( gSkewList[nItemId] == nSkew )
            break;
    }

    if( nItemId <= DIRECTION_SE )
    {
        mxDirectionSet->SelectItem( nItemId+1 );
    }
    else
    {
        mxDirectionSet->SetNoSelection();
    }

    if (bEnabled)
        mxDirectionSet->Enable();
    else
        mxDirectionSet->Disable();
}

void ExtrusionDirectionWindow::implSetProjection( sal_Int32 nProjection, bool bEnabled )
{
    mxPerspective->set_active(nProjection == 0 && bEnabled);
    mxParallel->set_active(nProjection == 1 && bEnabled);
    mxPerspective->set_sensitive(bEnabled);
    mxParallel->set_sensitive(bEnabled);
}

void ExtrusionDirectionWindow::statusChanged(
    const css::frame::FeatureStateEvent& Event
)
{
    if( Event.FeatureURL.Main == g_sExtrusionDirection )
    {
        if( !Event.IsEnabled )
        {
            implSetDirection( -1, false );
        }
        else
        {
            sal_Int32 nValue = 0;
            if( Event.State >>= nValue )
                implSetDirection( nValue, true );
        }
    }
    else if( Event.FeatureURL.Main == g_sExtrusionProjection )
    {
        if( !Event.IsEnabled )
        {
            implSetProjection( -1, false );
        }
        else
        {
            sal_Int32 nValue = 0;
            if( Event.State >>= nValue )
                implSetProjection( nValue, true );
        }
    }
}

IMPL_LINK_NOARG(ExtrusionDirectionWindow, SelectValueSetHdl, ValueSet*, void)
{
    Sequence< PropertyValue > aArgs( 1 );
    aArgs[0].Name = OUString(g_sExtrusionDirection).copy(5);
    aArgs[0].Value <<= gSkewList[mxDirectionSet->GetSelectedItemId()-1];

    mxControl->dispatchCommand( g_sExtrusionDirection, aArgs );

    mxControl->EndPopupMode();
}

IMPL_LINK_NOARG(ExtrusionDirectionWindow, SelectToolbarMenuHdl, weld::Toggleable&, void)
{
    int nProjection = mxPerspective->get_active() ? 0 : 1;

    Sequence< PropertyValue > aArgs( 1 );
    aArgs[0].Name = OUString(g_sExtrusionProjection).copy(5);
    aArgs[0].Value <<= static_cast<sal_Int32>(nProjection);

    mxControl->dispatchCommand( g_sExtrusionProjection, aArgs );
    implSetProjection( nProjection, true );

    mxControl->EndPopupMode();
}

ExtrusionDirectionControl::ExtrusionDirectionControl(
    const Reference< XComponentContext >& rxContext
)   : svt::PopupWindowController(
        rxContext,
        Reference< css::frame::XFrame >(),
        ".uno:ExtrusionDirectionFloater"
    )
{
}

std::unique_ptr<WeldToolbarPopup> ExtrusionDirectionControl::weldPopupWindow()
{
    return std::make_unique<ExtrusionDirectionWindow>(this, m_pToolbar);
}

VclPtr<vcl::Window> ExtrusionDirectionControl::createVclPopupWindow( vcl::Window* pParent )
{
    mxInterimPopover = VclPtr<InterimToolbarPopup>::Create(getFrameInterface(), pParent,
        std::make_unique<ExtrusionDirectionWindow>(this, pParent->GetFrameWeld()));

    mxInterimPopover->Show();

    return mxInterimPopover;
}

// XInitialization
void SAL_CALL ExtrusionDirectionControl::initialize( const css::uno::Sequence< css::uno::Any >& aArguments )
{
    svt::PopupWindowController::initialize( aArguments );

    ToolBox* pToolBox = nullptr;
    ToolBoxItemId nId;
    if ( getToolboxId( nId, &pToolBox ) )
        pToolBox->SetItemBits( nId, pToolBox->GetItemBits( nId ) | ToolBoxItemBits::DROPDOWNONLY );
}

// XServiceInfo


OUString ExtrusionDirectionControl::getImplementationName()
{
    return "com.sun.star.comp.svx.ExtrusionDirectionController";
}


Sequence< OUString > ExtrusionDirectionControl::getSupportedServiceNames()
{
    return { "com.sun.star.frame.ToolbarController" };
}


extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
com_sun_star_comp_svx_ExtrusionDirectionControl_get_implementation(
    css::uno::XComponentContext* xContext,
    css::uno::Sequence<css::uno::Any> const &)
{
    return cppu::acquire(new ExtrusionDirectionControl(xContext));
}


ExtrusionDepthDialog::ExtrusionDepthDialog(weld::Window* pParent, double fDepth, FieldUnit eDefaultUnit)
    : GenericDialogController(pParent, "svx/ui/extrustiondepthdialog.ui", "ExtrustionDepthDialog")
    , m_xMtrDepth(m_xBuilder->weld_metric_spin_button("depth", eDefaultUnit))
{
    m_xMtrDepth->set_value(static_cast<int>(fDepth) * 100, FieldUnit::MM_100TH);
}

ExtrusionDepthDialog::~ExtrusionDepthDialog()
{
}

double ExtrusionDepthDialog::getDepth() const
{
    return static_cast<double>(m_xMtrDepth->get_value(FieldUnit::MM_100TH)) / 100.0;
}

double const aDepthListInch[] = { 0, 1270,2540,5080,10160 };
double const aDepthListMM[] = { 0, 1000, 2500, 5000, 10000 };

constexpr OUStringLiteral gsExtrusionDepth( u".uno:ExtrusionDepth" );
constexpr OUStringLiteral gsMetricUnit(     u".uno:MetricUnit"     );

ExtrusionDepthWindow::ExtrusionDepthWindow(svt::PopupWindowController* pControl, weld::Widget* pParent)
    : WeldToolbarPopup(pControl->getFrameInterface(), pParent, "svx/ui/depthwindow.ui", "DepthWindow")
    , mxControl(pControl)
    , mxDepth0(m_xBuilder->weld_radio_button("depth0"))
    , mxDepth1(m_xBuilder->weld_radio_button("depth1"))
    , mxDepth2(m_xBuilder->weld_radio_button("depth2"))
    , mxDepth3(m_xBuilder->weld_radio_button("depth3"))
    , mxDepth4(m_xBuilder->weld_radio_button("depth4"))
    , mxInfinity(m_xBuilder->weld_radio_button("infinity"))
    , mxCustom(m_xBuilder->weld_radio_button("custom"))
    , meUnit(FieldUnit::NONE)
    , mfDepth( -1.0 )
    , mbSettingValue(false)
{
    mxDepth0->connect_toggled(LINK(this, ExtrusionDepthWindow, SelectHdl));
    mxDepth1->connect_toggled(LINK(this, ExtrusionDepthWindow, SelectHdl));
    mxDepth2->connect_toggled(LINK(this, ExtrusionDepthWindow, SelectHdl));
    mxDepth3->connect_toggled(LINK(this, ExtrusionDepthWindow, SelectHdl));
    mxDepth4->connect_toggled(LINK(this, ExtrusionDepthWindow, SelectHdl));
    mxInfinity->connect_toggled(LINK(this, ExtrusionDepthWindow, SelectHdl));
    mxCustom->connect_toggled(LINK(this, ExtrusionDepthWindow, SelectHdl));

    AddStatusListener( gsExtrusionDepth );
    AddStatusListener( gsMetricUnit );
}

void ExtrusionDepthWindow::GrabFocus()
{
    mxDepth0->grab_focus();
}

void ExtrusionDepthWindow::implSetDepth( double fDepth )
{
    mfDepth = fDepth;

    bool bSettingValue = mbSettingValue;
    mbSettingValue = true;

    mxCustom->set_active(true);
    bool bIsMetric = IsMetric(meUnit);
    mxDepth0->set_active(fDepth == (bIsMetric ? aDepthListMM[0] : aDepthListInch[0]));
    mxDepth1->set_active(fDepth == (bIsMetric ? aDepthListMM[1] : aDepthListInch[1]));
    mxDepth2->set_active(fDepth == (bIsMetric ? aDepthListMM[2] : aDepthListInch[2]));
    mxDepth3->set_active(fDepth == (bIsMetric ? aDepthListMM[3] : aDepthListInch[3]));
    mxDepth4->set_active(fDepth == (bIsMetric ? aDepthListMM[4] : aDepthListInch[4]));
    mxInfinity->set_active(fDepth >= 338666);

    mbSettingValue = bSettingValue;
}

void ExtrusionDepthWindow::implFillStrings( FieldUnit eUnit )
{
    meUnit = eUnit;

    const TranslateId aDepths[] =
    {
        RID_SVXSTR_DEPTH_0,
        RID_SVXSTR_DEPTH_1,
        RID_SVXSTR_DEPTH_2,
        RID_SVXSTR_DEPTH_3,
        RID_SVXSTR_DEPTH_4
    };

    const TranslateId aDepthsInch[] =
    {
        RID_SVXSTR_DEPTH_0_INCH,
        RID_SVXSTR_DEPTH_1_INCH,
        RID_SVXSTR_DEPTH_2_INCH,
        RID_SVXSTR_DEPTH_3_INCH,
        RID_SVXSTR_DEPTH_4_INCH
    };

    assert(SAL_N_ELEMENTS(aDepths) == SAL_N_ELEMENTS(aDepthsInch));

    const TranslateId* pResource = IsMetric(eUnit) ? aDepths : aDepthsInch;

    mxDepth0->set_label(SvxResId(pResource[0]));
    mxDepth1->set_label(SvxResId(pResource[1]));
    mxDepth2->set_label(SvxResId(pResource[2]));
    mxDepth3->set_label(SvxResId(pResource[3]));
    mxDepth4->set_label(SvxResId(pResource[4]));
}

void ExtrusionDepthWindow::statusChanged(
    const css::frame::FeatureStateEvent& Event
)
{
    if( Event.FeatureURL.Main == gsExtrusionDepth )
    {
        if( !Event.IsEnabled )
        {
            implSetDepth( 0 );
        }
        else
        {
            double fValue = 0.0;
            if( Event.State >>= fValue )
                implSetDepth( fValue );
        }
    }
    else if( Event.FeatureURL.Main == gsMetricUnit )
    {
        if( Event.IsEnabled )
        {
            sal_Int32 nValue = 0;
            if( Event.State >>= nValue )
            {
                implFillStrings( static_cast<FieldUnit>(nValue) );
                if( mfDepth >= 0.0 )
                    implSetDepth( mfDepth );
            }
        }
    }
}

IMPL_LINK(ExtrusionDepthWindow, SelectHdl, weld::Toggleable&, rButton, void)
{
    if (mbSettingValue || !rButton.get_active())
        return;

    if (mxCustom->get_active())
    {
        Sequence< PropertyValue > aArgs( 2 );
        aArgs[0].Name = "Depth";
        aArgs[0].Value <<= mfDepth;
        aArgs[1].Name = "Metric";
        aArgs[1].Value <<= static_cast<sal_Int32>( meUnit );

        rtl::Reference<svt::PopupWindowController> xControl(mxControl);
        xControl->EndPopupMode();
        xControl->dispatchCommand(".uno:ExtrusionDepthDialog", aArgs);
    }
    else
    {
        double fDepth;

        if (mxInfinity->get_active())
        {
            fDepth = 338666.6;
        }
        else
        {
            int nSelected;
            if (mxDepth0->get_active())
                nSelected = 0;
            else if (mxDepth1->get_active())
                nSelected = 1;
            else if (mxDepth2->get_active())
                nSelected = 2;
            else if (mxDepth3->get_active())
                nSelected = 3;
            else
                nSelected = 4;

            fDepth = IsMetric( meUnit ) ? aDepthListMM[nSelected] : aDepthListInch[nSelected];
        }

        Sequence< PropertyValue > aArgs( 1 );
        aArgs[0].Name = OUString(gsExtrusionDepth).copy(5);
        aArgs[0].Value <<= fDepth;

        mxControl->dispatchCommand( gsExtrusionDepth,  aArgs );
        implSetDepth( fDepth );

        mxControl->EndPopupMode();
    }
}

// ExtrusionDirectionControl
ExtrusionDepthController::ExtrusionDepthController(
    const Reference< XComponentContext >& rxContext
)   : svt::PopupWindowController(
        rxContext,
        Reference< css::frame::XFrame >(),
        ".uno:ExtrusionDepthFloater"
    )
{
}

std::unique_ptr<WeldToolbarPopup> ExtrusionDepthController::weldPopupWindow()
{
    return std::make_unique<ExtrusionDepthWindow>(this, m_pToolbar);
}

VclPtr<vcl::Window> ExtrusionDepthController::createVclPopupWindow( vcl::Window* pParent )
{
    mxInterimPopover = VclPtr<InterimToolbarPopup>::Create(getFrameInterface(), pParent,
        std::make_unique<ExtrusionDepthWindow>(this, pParent->GetFrameWeld()));

    mxInterimPopover->Show();

    return mxInterimPopover;
}

// XInitialization
void SAL_CALL ExtrusionDepthController::initialize( const css::uno::Sequence< css::uno::Any >& aArguments )
{
    svt::PopupWindowController::initialize( aArguments );

    ToolBox* pToolBox = nullptr;
    ToolBoxItemId nId;
    if ( getToolboxId( nId, &pToolBox ) )
        pToolBox->SetItemBits( nId, pToolBox->GetItemBits( nId ) | ToolBoxItemBits::DROPDOWNONLY );
}

// XServiceInfo


OUString ExtrusionDepthController::getImplementationName()
{
    return "com.sun.star.comp.svx.ExtrusionDepthController";
}


Sequence< OUString > ExtrusionDepthController::getSupportedServiceNames()
{
    return { "com.sun.star.frame.ToolbarController" };
}


extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
com_sun_star_comp_svx_ExtrusionDepthController_get_implementation(
    css::uno::XComponentContext* xContext,
    css::uno::Sequence<css::uno::Any> const &)
{
    return cppu::acquire(new ExtrusionDepthController(xContext));
}


constexpr OUStringLiteral g_sExtrusionLightingDirection = u".uno:ExtrusionLightingDirection";
constexpr OUStringLiteral g_sExtrusionLightingIntensity = u".uno:ExtrusionLightingIntensity";

ExtrusionLightingWindow::ExtrusionLightingWindow(svt::PopupWindowController* pControl,
                                                 weld::Widget* pParent)
    : WeldToolbarPopup(pControl->getFrameInterface(), pParent, "svx/ui/lightingwindow.ui", "LightingWindow")
    , mxControl(pControl)
    , mxLightingSet(new ValueSet(nullptr))
    , mxLightingSetWin(new weld::CustomWeld(*m_xBuilder, "valueset", *mxLightingSet))
    , mxBright(m_xBuilder->weld_radio_button("bright"))
    , mxNormal(m_xBuilder->weld_radio_button("normal"))
    , mxDim(m_xBuilder->weld_radio_button("dim"))
{
    mxLightingSet->SetStyle(WB_TABSTOP | WB_MENUSTYLEVALUESET | WB_FLATVALUESET | WB_NOBORDER | WB_NO_DIRECTSELECT);

    for (sal_uInt16 i = FROM_TOP_LEFT; i <= FROM_BOTTOM_RIGHT; ++i)
    {
        if( i != FROM_FRONT )
        {
            maImgLightingOff[i] = Image(StockImage::Yes, OUString(aLightOffBmps[i]));
            maImgLightingOn[i] = Image(StockImage::Yes, OUString(aLightOnBmps[i]));
        }
        maImgLightingPreview[i] = Image(StockImage::Yes, OUString(aLightPreviewBmps[i]));
    }

    mxLightingSet->SetHelpId( HID_VALUESET_EXTRUSION_LIGHTING );

    mxLightingSet->SetSelectHdl( LINK( this, ExtrusionLightingWindow, SelectValueSetHdl ) );
    mxLightingSet->SetColCount( 3 );
    mxLightingSet->EnableFullItemMode( false );

    for (sal_uInt16 i = FROM_TOP_LEFT; i <= FROM_BOTTOM_RIGHT; ++i)
    {
        if( i != FROM_FRONT )
        {
            mxLightingSet->InsertItem( i+1, maImgLightingOff[i] );
        }
        else
        {
            mxLightingSet->InsertItem( 5, maImgLightingPreview[FROM_FRONT] );
        }
    }
    Size aSize(72, 72);
    mxLightingSet->GetDrawingArea()->set_size_request(aSize.Width(), aSize.Height());
    mxLightingSet->SetOutputSizePixel(aSize);

    mxBright->connect_toggled(LINK(this, ExtrusionLightingWindow, SelectToolbarMenuHdl));
    mxNormal->connect_toggled(LINK(this, ExtrusionLightingWindow, SelectToolbarMenuHdl));
    mxDim->connect_toggled(LINK(this, ExtrusionLightingWindow, SelectToolbarMenuHdl));

    AddStatusListener( g_sExtrusionLightingDirection );
    AddStatusListener( g_sExtrusionLightingIntensity );
}

void ExtrusionLightingWindow::GrabFocus()
{
    mxLightingSet->GrabFocus();
}

ExtrusionLightingWindow::~ExtrusionLightingWindow()
{
}

void ExtrusionLightingWindow::implSetIntensity( int nLevel, bool bEnabled )
{
    mxBright->set_sensitive(bEnabled);
    mxBright->set_active(nLevel == 0 && bEnabled);
    mxNormal->set_sensitive(bEnabled);
    mxNormal->set_active(nLevel == 1 && bEnabled);
    mxDim->set_sensitive(bEnabled);
    mxDim->set_active(nLevel == 2 && bEnabled);
}

void ExtrusionLightingWindow::implSetDirection( int nDirection, bool bEnabled )
{
    if( !bEnabled )
        nDirection = FROM_FRONT;

    sal_uInt16 nItemId;
    for( nItemId = FROM_TOP_LEFT; nItemId <= FROM_BOTTOM_RIGHT; nItemId++ )
    {
        if( nItemId == FROM_FRONT )
        {
            mxLightingSet->SetItemImage( nItemId + 1, maImgLightingPreview[ nDirection ] );
        }
        else
        {
            mxLightingSet->SetItemImage(
                nItemId + 1,
                static_cast<sal_uInt16>(nDirection) == nItemId ? maImgLightingOn[nItemId] : maImgLightingOff[nItemId]
            );
        }
    }

    if (bEnabled)
        mxLightingSet->Enable();
    else
        mxLightingSet->Disable();
}

void ExtrusionLightingWindow::statusChanged(
    const css::frame::FeatureStateEvent& Event
)
{
    if( Event.FeatureURL.Main == g_sExtrusionLightingIntensity )
    {
        if( !Event.IsEnabled )
        {
            implSetIntensity( 0, false );
        }
        else
        {
            sal_Int32 nValue = 0;
            if( Event.State >>= nValue )
                implSetIntensity( nValue, true );
        }
    }
    else if( Event.FeatureURL.Main == g_sExtrusionLightingDirection )
    {
        if( !Event.IsEnabled )
        {
            implSetDirection( 0, false );
        }
        else
        {
            sal_Int32 nValue = 0;
            if( Event.State >>= nValue )
                implSetDirection( nValue, true );
        }
    }
}

IMPL_LINK_NOARG(ExtrusionLightingWindow, SelectValueSetHdl, ValueSet*, void)
{
    sal_Int32 nDirection = mxLightingSet->GetSelectedItemId();

    if( (nDirection > 0) && (nDirection < 10) )
    {
        nDirection--;

        Sequence< PropertyValue > aArgs( 1 );
        aArgs[0].Name = OUString(g_sExtrusionLightingDirection).copy(5);
        aArgs[0].Value <<= nDirection;

        mxControl->dispatchCommand( g_sExtrusionLightingDirection, aArgs );

        implSetDirection( nDirection, true );
    }

    mxControl->EndPopupMode();
}

IMPL_LINK(ExtrusionLightingWindow, SelectToolbarMenuHdl, weld::Toggleable&, rButton, void)
{
    if (!rButton.get_active())
        return;

    int nLevel;
    if (mxBright->get_active())
        nLevel = 0;
    else if (mxNormal->get_active())
        nLevel = 1;
    else
        nLevel = 2;

    Sequence< PropertyValue > aArgs( 1 );
    aArgs[0].Name = OUString(g_sExtrusionLightingIntensity).copy(5);
    aArgs[0].Value <<= static_cast<sal_Int32>(nLevel);

    mxControl->dispatchCommand( g_sExtrusionLightingIntensity, aArgs );

    implSetIntensity( nLevel, true );

    mxControl->EndPopupMode();
}

ExtrusionLightingControl::ExtrusionLightingControl(
    const Reference< XComponentContext >& rxContext
)   : svt::PopupWindowController( rxContext,
                Reference< css::frame::XFrame >(),
                ".uno:ExtrusionDirectionFloater"
    )
{
}

std::unique_ptr<WeldToolbarPopup> ExtrusionLightingControl::weldPopupWindow()
{
    return std::make_unique<ExtrusionLightingWindow>(this, m_pToolbar);
}

VclPtr<vcl::Window> ExtrusionLightingControl::createVclPopupWindow( vcl::Window* pParent )
{
    mxInterimPopover = VclPtr<InterimToolbarPopup>::Create(getFrameInterface(), pParent,
        std::make_unique<ExtrusionLightingWindow>(this, pParent->GetFrameWeld()));

    mxInterimPopover->Show();

    return mxInterimPopover;
}

// XInitialization
void SAL_CALL ExtrusionLightingControl::initialize( const css::uno::Sequence< css::uno::Any >& aArguments )
{
    svt::PopupWindowController::initialize( aArguments );

    ToolBox* pToolBox = nullptr;
    ToolBoxItemId nId;
    if ( getToolboxId( nId, &pToolBox ) )
        pToolBox->SetItemBits( nId, pToolBox->GetItemBits( nId ) | ToolBoxItemBits::DROPDOWNONLY );
}

// XServiceInfo


OUString ExtrusionLightingControl::getImplementationName()
{
    return "com.sun.star.comp.svx.ExtrusionLightingController";
}


Sequence< OUString > ExtrusionLightingControl::getSupportedServiceNames()
{
    return { "com.sun.star.frame.ToolbarController" };
}


extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
com_sun_star_comp_svx_ExtrusionLightingControl_get_implementation(
    css::uno::XComponentContext* xContext,
    css::uno::Sequence<css::uno::Any> const &)
{
    return cppu::acquire(new ExtrusionLightingControl(xContext));
}


constexpr OUStringLiteral g_sExtrusionSurface = u".uno:ExtrusionSurface";

ExtrusionSurfaceWindow::ExtrusionSurfaceWindow(svt::PopupWindowController* pControl, weld::Widget* pParent)
    : WeldToolbarPopup(pControl->getFrameInterface(), pParent, "svx/ui/surfacewindow.ui", "SurfaceWindow")
    , mxControl(pControl)
    , mxWireFrame(m_xBuilder->weld_radio_button("wireframe"))
    , mxMatt(m_xBuilder->weld_radio_button("matt"))
    , mxPlastic(m_xBuilder->weld_radio_button("plastic"))
    , mxMetal(m_xBuilder->weld_radio_button("metal"))
{
    mxWireFrame->connect_toggled(LINK(this, ExtrusionSurfaceWindow, SelectHdl));
    mxMatt->connect_toggled(LINK(this, ExtrusionSurfaceWindow, SelectHdl));
    mxPlastic->connect_toggled(LINK(this, ExtrusionSurfaceWindow, SelectHdl));
    mxMetal->connect_toggled(LINK(this, ExtrusionSurfaceWindow, SelectHdl));

    AddStatusListener( g_sExtrusionSurface );
}

void ExtrusionSurfaceWindow::GrabFocus()
{
    mxWireFrame->grab_focus();
}

void ExtrusionSurfaceWindow::implSetSurface( int nSurface, bool bEnabled )
{
    mxWireFrame->set_active(nSurface == 0 && bEnabled);
    mxWireFrame->set_sensitive(bEnabled);
    mxMatt->set_active(nSurface == 1 && bEnabled);
    mxMatt->set_sensitive(bEnabled);
    mxPlastic->set_active(nSurface == 2 && bEnabled);
    mxPlastic->set_sensitive(bEnabled);
    mxMetal->set_active(nSurface == 3 && bEnabled);
    mxMetal->set_sensitive(bEnabled);
}

void ExtrusionSurfaceWindow::statusChanged(
    const css::frame::FeatureStateEvent& Event
)
{
    if( Event.FeatureURL.Main != g_sExtrusionSurface )
        return;

    if( !Event.IsEnabled )
    {
        implSetSurface( 0, false );
    }
    else
    {
        sal_Int32 nValue = 0;
        if( Event.State >>= nValue )
            implSetSurface( nValue, true );
    }
}

IMPL_LINK(ExtrusionSurfaceWindow, SelectHdl, weld::Toggleable&, rButton, void)
{
    if (!rButton.get_active())
        return;

    sal_Int32 nSurface;
    if (mxWireFrame->get_active())
        nSurface = 0;
    else if (mxMatt->get_active())
        nSurface = 1;
    else if (mxPlastic->get_active())
        nSurface = 2;
    else
        nSurface = 3;

    Sequence< PropertyValue > aArgs( 1 );
    aArgs[0].Name = OUString(g_sExtrusionSurface).copy(5);
    aArgs[0].Value <<= nSurface;

    mxControl->dispatchCommand( g_sExtrusionSurface, aArgs );

    implSetSurface( nSurface, true );

    mxControl->EndPopupMode();
}

ExtrusionSurfaceControl::ExtrusionSurfaceControl(
    const Reference< XComponentContext >& rxContext
)
:   svt::PopupWindowController(
        rxContext,
        Reference< css::frame::XFrame >(),
        ".uno:ExtrusionSurfaceFloater"
    )
{
}

std::unique_ptr<WeldToolbarPopup> ExtrusionSurfaceControl::weldPopupWindow()
{
    return std::make_unique<ExtrusionSurfaceWindow>(this, m_pToolbar);
}

VclPtr<vcl::Window> ExtrusionSurfaceControl::createVclPopupWindow( vcl::Window* pParent )
{
    mxInterimPopover = VclPtr<InterimToolbarPopup>::Create(getFrameInterface(), pParent,
        std::make_unique<ExtrusionSurfaceWindow>(this, pParent->GetFrameWeld()));

    mxInterimPopover->Show();

    return mxInterimPopover;
}

// XInitialization
void SAL_CALL ExtrusionSurfaceControl::initialize( const css::uno::Sequence< css::uno::Any >& aArguments )
{
    svt::PopupWindowController::initialize( aArguments );

    ToolBox* pToolBox = nullptr;
    ToolBoxItemId nId;
    if ( getToolboxId( nId, &pToolBox ) )
        pToolBox->SetItemBits( nId, pToolBox->GetItemBits( nId ) | ToolBoxItemBits::DROPDOWNONLY );
}

// XServiceInfo


OUString ExtrusionSurfaceControl::getImplementationName()
{
    return "com.sun.star.comp.svx.ExtrusionSurfaceController";
}


Sequence< OUString > ExtrusionSurfaceControl::getSupportedServiceNames()
{
    return { "com.sun.star.frame.ToolbarController" };
}


extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
com_sun_star_comp_svx_ExtrusionSurfaceControl_get_implementation(
    css::uno::XComponentContext* xContext,
    css::uno::Sequence<css::uno::Any> const &)
{
    return cppu::acquire(new ExtrusionSurfaceControl(xContext));
}

}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */