/*************************************************************************
*
* $RCSfile: extrusioncontrols.cxx,v $
*
* $Revision: 1.5 $
*
* last change: $Author: rt $ $Date: 2005-01-27 16:17:08 $
*
* The Contents of this file are made available subject to the terms of
* either of the following licenses
*
* - GNU Lesser General Public License Version 2.1
* - Sun Industry Standards Source License Version 1.1
*
* Sun Microsystems Inc., October, 2000
*
* GNU Lesser General Public License Version 2.1
* =============================================
* Copyright 2000 by Sun Microsystems, Inc.
* 901 San Antonio Road, Palo Alto, CA 94303, USA
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2.1, as published by the Free Software Foundation.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*
* Sun Industry Standards Source License Version 1.1
* =================================================
* The contents of this file are subject to the Sun Industry Standards
* Source License Version 1.1 (the "License"); You may not use this file
* except in compliance with the License. You may obtain a copy of the
* License at http://www.openoffice.org/license.html.
*
* Software provided under this License is provided on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
* WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
* MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
* See the License for the specific provisions governing your rights and
* obligations concerning the Software.
*
* The Initial Developer of the Original Code is: Sun Microsystems, Inc.
*
* Copyright: 2000 by Sun Microsystems, Inc.
*
* All Rights Reserved.
*
* Contributor(s): _______________________________________
*
*
************************************************************************/
// include ---------------------------------------------------------------
#include <string> // HACK: prevent conflict between STLPORT and Workshop headers
#ifndef _TOOLBOX_HXX //autogen
#include <vcl/toolbox.hxx>
#endif
#ifndef _SFXAPP_HXX //autogen
#include <sfx2/app.hxx>
#endif
#ifndef _SFXDISPATCH_HXX //autogen
#include <sfx2/dispatch.hxx>
#endif
#ifndef _SFX_OBJSH_HXX //autogen
#include <sfx2/objsh.hxx>
#endif
#ifndef _SFXENUMITEM_HXX
#include <svtools/eitem.hxx>
#endif
#ifndef _SV_SETTINGS_HXX
#include <vcl/settings.hxx>
#endif
#ifndef _SFXINTITEM_HXX
#include <svtools/intitem.hxx>
#endif
#define ITEMID_COLOR 0
#ifndef _SVX_COLRITEM_HXX
#include "colritem.hxx"
#endif
#define ITEMID_DOUBLE 0
#ifndef _SVX_CHRTITEM_HXX
#include "chrtitem.hxx"
#endif
#include <tools/urlobj.hxx>
#include "dialogs.hrc"
#include "helpid.hrc"
//#include "drawitem.hxx"
//#include "xattr.hxx"
//#include "xtable.hxx"
//#include "linectrl.hxx"
//#include "itemwin.hxx"
#include "svdtrans.hxx"
#include "dialmgr.hxx"
#include "extrusioncontrols.hxx"
#include "extrusioncontrols.hrc"
#include "sdasitm.hxx"
#include "toolbarmenu.hxx"
#include "colorwindow.hxx"
////////////
using namespace svx;
using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::lang;
using namespace ::com::sun::star::beans;
SFX_IMPL_TOOLBOX_CONTROL( ExtrusionDirectionControl, SfxBoolItem );
/*************************************************************************
|*
|* ExtrusionDirectionWindow
|*
\************************************************************************/
static sal_Int32 gSkewList[] = { 135, 90, 45, 180, 0, -360, -135, -90, -45 };
ExtrusionDirectionWindow::ExtrusionDirectionWindow(
USHORT nId,
const ::com::sun::star::uno::Reference< ::com::sun::star::frame::XFrame >& rFrame ) :
SfxPopupWindow( nId,
rFrame,
SVX_RES( RID_SVXFLOAT_EXTRUSION_DIRECTION )),
mbPopupMode ( TRUE ),
maImgPerspective( SVX_RES( IMG_PERSPECTIVE ) ),
maImgPerspectiveH( SVX_RES( IMG_PERSPECTIVE_H ) ),
maImgParallel( SVX_RES( IMG_PARALLEL ) ),
maImgParallelH( SVX_RES( IMG_PARALLEL_H ) ),
mxFrame( rFrame )
{
SetHelpId( HID_POPUP_EXTRUSION_DIRECTION );
int i;
for( i = DIRECTION_NW; i <= DIRECTION_SE; i++ )
{
maImgDirection[i] = Image( SVX_RES( IMG_DIRECTION + i ) );
maImgDirectionH[i] = Image( SVX_RES( IMG_DIRECTION_H + i ) );
}
// mpDirectionForewarder = new SfxStatusForwarder( SID_EXTRUSION_DIRECTION, *this );
// mpProjectionForewarder = new SfxStatusForwarder( SID_EXTRUSION_PROJECTION, *this );
mpMenu = new ToolbarMenu( this, WB_CLIPCHILDREN );
mpMenu->SetHelpId( HID_MENU_EXTRUSION_DIRECTION );
mpMenu->SetSelectHdl( LINK( this, ExtrusionDirectionWindow, SelectHdl ) );
mpDirectionSet = new ValueSet( mpMenu, WB_TABSTOP | WB_MENUSTYLEVALUESET | WB_FLATVALUESET | WB_NOBORDER | WB_NO_DIRECTSELECT );
mpDirectionSet->SetHelpId( HID_VALUESET_EXTRUSION_DIRECTION );
mpDirectionSet->SetHelpId( HID_POPUP_LINEEND_CTRL );
mpDirectionSet->SetSelectHdl( LINK( this, ExtrusionDirectionWindow, SelectHdl ) );
mpDirectionSet->SetColCount( 3 );
mpDirectionSet->EnableFullItemMode( FALSE );
bool bHighContrast = GetDisplayBackground().GetColor().IsDark();
for( i = DIRECTION_NW; i <= DIRECTION_SE; i++ )
{
String aText( SVX_RES( STR_DIRECTION + i ) );
mpDirectionSet->InsertItem( i+1, bHighContrast ? maImgDirectionH[ i ] : maImgDirection[ i ], aText );
}
mpDirectionSet->SetOutputSizePixel( Size( 72, 72 ) );
mpMenu->appendEntry( 2, mpDirectionSet );
mpMenu->appendSeparator();
mpMenu->appendEntry( 0, String( SVX_RES( STR_PERSPECTIVE ) ), bHighContrast ? maImgPerspectiveH : maImgPerspective );
mpMenu->appendEntry( 1, String( SVX_RES( STR_PARALLEL ) ), bHighContrast ? maImgParallelH : maImgParallel );
SetOutputSizePixel( mpMenu->getMenuSize() );
mpMenu->SetOutputSizePixel( GetOutputSizePixel() );
mpMenu->Show();
FreeResource();
AddStatusListener( rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( ".uno:ExtrusionDirection" )));
AddStatusListener( rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( ".uno:ExtrusionProjection" )));
// rBindings.Update( SID_EXTRUSION_DIRECTION );
// rBindings.Update( SID_EXTRUSION_PROJECTION );
}
SfxPopupWindow* ExtrusionDirectionWindow::Clone() const
{
return new ExtrusionDirectionWindow( GetId(), mxFrame );
}
void ExtrusionDirectionWindow::DataChanged( const DataChangedEvent& rDCEvt )
{
SfxPopupWindow::DataChanged( rDCEvt );
if( ( rDCEvt.GetType() == DATACHANGED_SETTINGS ) && ( rDCEvt.GetFlags() & SETTINGS_STYLE ) )
{
bool bHighContrast = GetDisplayBackground().GetColor().IsDark();
int i;
for( i = DIRECTION_NW; i <= DIRECTION_SE; i++ )
{
mpDirectionSet->SetItemImage( i+1, bHighContrast ? maImgDirectionH[ i ] : maImgDirection[ i ] );
}
mpMenu->setEntryImage( 0, bHighContrast ? maImgPerspectiveH : maImgPerspective );
mpMenu->setEntryImage( 1, bHighContrast ? maImgParallelH : maImgParallel );
}
}
// -----------------------------------------------------------------------
ExtrusionDirectionWindow::~ExtrusionDirectionWindow()
{
// delete mpDirectionForewarder;
// delete mpProjectionForewarder;
delete mpMenu;
}
// -----------------------------------------------------------------------
void ExtrusionDirectionWindow::implSetDirection( sal_Int32 nSkew, bool bEnabled )
{
if( mpDirectionSet )
{
USHORT nItemId;
for( nItemId = DIRECTION_NW; nItemId <= DIRECTION_SE; nItemId++ )
{
if( gSkewList[nItemId] == nSkew )
break;
}
if( nItemId <= DIRECTION_SE )
{
mpDirectionSet->SelectItem( nItemId+1 );
}
else
{
mpDirectionSet->SetNoSelection();
}
}
if( mpMenu )
{
mpMenu->enableEntry( 2, bEnabled );
}
}
// -----------------------------------------------------------------------
void ExtrusionDirectionWindow::implSetProjection( sal_Int32 nProjection, bool bEnabled )
{
if( mpMenu )
{
mpMenu->checkEntry( 0, (nProjection == 0) && bEnabled );
mpMenu->checkEntry( 1, (nProjection == 1 ) && bEnabled );
mpMenu->enableEntry( 0, bEnabled );
mpMenu->enableEntry( 1, bEnabled );
}
}
// -----------------------------------------------------------------------
void ExtrusionDirectionWindow::StateChanged( USHORT nSID, SfxItemState eState, const SfxPoolItem* pState )
{
switch( nSID )
{
case SID_EXTRUSION_DIRECTION:
{
if( eState == SFX_ITEM_DISABLED )
{
implSetDirection( -1, false );
}
else
{
const SfxInt32Item* pStateItem = PTR_CAST( SfxInt32Item, pState );
if( pStateItem )
implSetDirection( pStateItem->GetValue(), true );
}
break;
}
case SID_EXTRUSION_PROJECTION:
{
if( eState == SFX_ITEM_DISABLED )
{
implSetProjection( -1, false );
}
else
{
const SfxInt32Item* pStateItem = PTR_CAST( SfxInt32Item, pState );
if( pStateItem )
implSetProjection( pStateItem->GetValue(), true );
}
break;
}
}
}
// -----------------------------------------------------------------------
IMPL_LINK( ExtrusionDirectionWindow, SelectHdl, void *, pControl )
{
if ( IsInPopupMode() )
EndPopupMode();
// SfxDispatcher* pDisp = GetBindings().GetDispatcher();
if( pControl == mpDirectionSet )
{
sal_Int32 nSkew = gSkewList[mpDirectionSet->GetSelectItemId()-1];
SfxInt32Item aItem( SID_EXTRUSION_DIRECTION, nSkew );
rtl::OUString aCommand( RTL_CONSTASCII_USTRINGPARAM( ".uno:ExtrusionDirection" ));
Any a;
INetURLObject aObj( aCommand );
Sequence< PropertyValue > aArgs( 1 );
aArgs[0].Name = aObj.GetURLPath();
aItem.QueryValue( a );
aArgs[0].Value = a;
SfxToolBoxControl::Dispatch( Reference< ::com::sun::star::frame::XDispatchProvider >(
mxFrame->getController(), UNO_QUERY ),
aCommand,
aArgs );
// pDisp->Execute( SID_EXTRUSION_DIRECTION, SFX_CALLMODE_RECORD, &aItem, 0L , 0L );
}
else
{
int nProjection = mpMenu->getSelectedEntryId();
if( (nProjection >= 0) && (nProjection < 2 ) )
{
SfxInt32Item aItem( SID_EXTRUSION_PROJECTION, nProjection );
rtl::OUString aCommand( RTL_CONSTASCII_USTRINGPARAM( ".uno:ExtrusionProjection" ));
Any a;
INetURLObject aObj( aCommand );
Sequence< PropertyValue > aArgs( 1 );
aArgs[0].Name = aObj.GetURLPath();
aItem.QueryValue( a );
aArgs[0].Value = a;
SfxToolBoxControl::Dispatch( Reference< ::com::sun::star::frame::XDispatchProvider >(
mxFrame->getController(), UNO_QUERY ),
aCommand,
aArgs );
// pDisp->Execute( SID_EXTRUSION_PROJECTION, SFX_CALLMODE_RECORD, &aItem, 0L , 0L );
implSetProjection( nProjection, true );
}
}
return 0;
}
// -----------------------------------------------------------------------
void ExtrusionDirectionWindow::FillValueSet()
{
}
// -----------------------------------------------------------------------
void ExtrusionDirectionWindow::StartSelection()
{
mpDirectionSet->StartSelection();
}
// -----------------------------------------------------------------------
BOOL ExtrusionDirectionWindow::Close()
{
return SfxPopupWindow::Close();
}
// -----------------------------------------------------------------------
void ExtrusionDirectionWindow::PopupModeEnd()
{
if ( IsVisible() )
{
mbPopupMode = FALSE;
}
SfxPopupWindow::PopupModeEnd();
}
// -----------------------------------------------------------------------
void ExtrusionDirectionWindow::GetFocus (void)
{
SfxPopupWindow::GetFocus();
// Grab the focus to the line ends value set so that it can be controlled
// with the keyboard.
if( mpDirectionSet )
mpDirectionSet->GrabFocus();
}
/*************************************************************************
|*
|* SvxLineEndToolBoxControl
|*
\************************************************************************/
ExtrusionDirectionControl::ExtrusionDirectionControl(
USHORT nSlotId, USHORT nId, ToolBox &rTbx )
: SfxToolBoxControl( nSlotId, nId, rTbx )
{
rTbx.SetItemBits( nId, TIB_DROPDOWN | rTbx.GetItemBits( nId ) );
}
// -----------------------------------------------------------------------
ExtrusionDirectionControl::~ExtrusionDirectionControl()
{
}
// -----------------------------------------------------------------------
SfxPopupWindowType ExtrusionDirectionControl::GetPopupWindowType() const
{
return SFX_POPUPWINDOW_ONCLICK;
}
// -----------------------------------------------------------------------
SfxPopupWindow* ExtrusionDirectionControl::CreatePopupWindow()
{
ExtrusionDirectionWindow* pWin = new ExtrusionDirectionWindow( GetId(), m_xFrame );
pWin->StartPopupMode( &GetToolBox(), TRUE );
pWin->StartSelection();
SetPopupWindow( pWin );
return pWin;
}
// -----------------------------------------------------------------------
void ExtrusionDirectionControl::StateChanged( USHORT nSID, SfxItemState eState, const SfxPoolItem* pState )
{
USHORT nId = GetId();
ToolBox& rTbx = GetToolBox();
rTbx.EnableItem( nId, SFX_ITEM_DISABLED != eState );
rTbx.SetItemState( nId, ( SFX_ITEM_DONTCARE == eState ) ? STATE_DONTKNOW : STATE_NOCHECK );
}
// ####################################################################
ExtrusionDepthDialog::ExtrusionDepthDialog( Window* pParent, double fDepth, FieldUnit eDefaultUnit )
: ModalDialog( pParent, SVX_RES( RID_SVX_MDLG_EXTRUSION_DEPTH ) ),
maFLDepth( this, SVX_RES( FL_DEPTH ) ),
maMtrDepth( this, SVX_RES( MTR_DEPTH ) ),
maOKButton( this, SVX_RES( BTN_OK ) ),
maCancelButton( this, SVX_RES( BTN_CANCEL ) ),
maHelpButton( this, SVX_RES( BTN_HELP ) )
{
bool bMetric = IsMetric( eDefaultUnit );
maMtrDepth.SetUnit( bMetric ? FUNIT_CM : FUNIT_INCH );
maMtrDepth.SetValue( (int) fDepth * (bMetric ? 10 : 100), FUNIT_100TH_MM );
FreeResource();
}
ExtrusionDepthDialog::~ExtrusionDepthDialog()
{
}
double ExtrusionDepthDialog::getDepth() const
{
bool bMetric = IsMetric( meDefaultUnit );
return (double)maMtrDepth.GetValue( FUNIT_100TH_MM ) / (bMetric ? 10 : 100);
}
// ####################################################################
SFX_IMPL_TOOLBOX_CONTROL( ExtrusionDepthControl, SfxBoolItem );
ExtrusionDepthWindow::ExtrusionDepthWindow(
USHORT nId,
const ::com::sun::star::uno::Reference< ::com::sun::star::frame::XFrame >& rFrame ) :
SfxPopupWindow( nId,
rFrame,
SVX_RES( RID_SVXFLOAT_EXTRUSION_DEPTH )),
mbPopupMode ( true ),
maImgDepth0( SVX_RES( IMG_DEPTH_0 ) ),
maImgDepth1( SVX_RES( IMG_DEPTH_1 ) ),
maImgDepth2( SVX_RES( IMG_DEPTH_2 ) ),
maImgDepth3( SVX_RES( IMG_DEPTH_3 ) ),
maImgDepth4( SVX_RES( IMG_DEPTH_4 ) ),
maImgDepthInfinity( SVX_RES( IMG_DEPTH_INFINITY ) ),
maImgDepth0h( SVX_RES( IMG_DEPTH_0_H ) ),
maImgDepth1h( SVX_RES( IMG_DEPTH_1_H ) ),
maImgDepth2h( SVX_RES( IMG_DEPTH_2_H ) ),
maImgDepth3h( SVX_RES( IMG_DEPTH_3_H ) ),
maImgDepth4h( SVX_RES( IMG_DEPTH_4_H ) ),
maImgDepthInfinityh( SVX_RES( IMG_DEPTH_INFINITY_H ) ),
mfDepth( -1.0 ),
mbEnabled( false ),
mbInExecute( false ),
mxFrame( rFrame )
{
SetHelpId( HID_POPUP_EXTRUSION_DEPTH );
// mpDepthForewarder = new SfxStatusForwarder( SID_EXTRUSION_DEPTH, *this );
// mpMetricForewarder = new SfxStatusForwarder( SID_ATTR_METRIC, *this );
mpMenu = new ToolbarMenu( this, WB_CLIPCHILDREN );
mpMenu->SetHelpId( HID_MENU_EXTRUSION_DEPTH );
mpMenu->SetSelectHdl( LINK( this, ExtrusionDepthWindow, SelectHdl ) );
bool bHighContrast = GetDisplayBackground().GetColor().IsDark();
String aEmpty;
mpMenu->appendEntry( 0, aEmpty, bHighContrast ? maImgDepth0h : maImgDepth0 );
mpMenu->appendEntry( 1, aEmpty, bHighContrast ? maImgDepth1h : maImgDepth1 );
mpMenu->appendEntry( 2, aEmpty, bHighContrast ? maImgDepth2h : maImgDepth2 );
mpMenu->appendEntry( 3, aEmpty, bHighContrast ? maImgDepth3h : maImgDepth3 );
mpMenu->appendEntry( 4, aEmpty, bHighContrast ? maImgDepth4h : maImgDepth4 );
mpMenu->appendEntry( 5, String( SVX_RES( STR_INFINITY ) ), bHighContrast ? maImgDepthInfinityh : maImgDepthInfinity );
mpMenu->appendEntry( 6, String( SVX_RES( STR_CUSTOM ) ) );
SetOutputSizePixel( mpMenu->getMenuSize() );
mpMenu->SetOutputSizePixel( GetOutputSizePixel() );
mpMenu->Show();
FreeResource();
AddStatusListener( rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( ".uno:ExtrusionDepth" )));
AddStatusListener( rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( ".uno:MetricUnit" )));
// rBindings.Update( SID_ATTR_METRIC );
// rBindings.Update( SID_EXTRUSION_DEPTH );
}
SfxPopupWindow* ExtrusionDepthWindow::Clone() const
{
return new ExtrusionDepthWindow( GetId(), mxFrame );
}
// -----------------------------------------------------------------------
ExtrusionDepthWindow::~ExtrusionDepthWindow()
{
// delete mpDepthForewarder;
// delete mpMetricForewarder;
delete mpMenu;
}
// -----------------------------------------------------------------------
double aDepthListInch[] = { 0, 1270,2540,5080,10160 };
double aDepthListMM[] = { 0, 1000, 2500, 5000, 10000 };
void ExtrusionDepthWindow::implSetDepth( double fDepth, bool bEnabled )
{
mbEnabled = bEnabled;
mfDepth = fDepth;
if( mpMenu )
{
int i;
for( i = 0; i < 7; i++ )
{
if( i == 5 )
{
mpMenu->checkEntry( i, (fDepth >= 338666) && bEnabled );
}
else if( i != 6 )
{
mpMenu->checkEntry( i, (fDepth == (IsMetric( meUnit ) ? aDepthListMM[i] : aDepthListInch[i]) && bEnabled ) );
}
mpMenu->enableEntry( i, bEnabled );
}
}
}
// -----------------------------------------------------------------------
void ExtrusionDepthWindow::implFillStrings( FieldUnit eUnit )
{
meUnit = eUnit;
USHORT nResource = IsMetric( eUnit ) ? RID_SVXSTR_DEPTH_0 : RID_SVXSTR_DEPTH_0_INCH;
for( int i = 0; i < 5; i++ )
{
String aStr( SVX_RES( nResource + i ) );
mpMenu->setEntryText( i, aStr );
};
}
// -----------------------------------------------------------------------
void ExtrusionDepthWindow::StateChanged( USHORT nSID, SfxItemState eState, const SfxPoolItem* pState )
{
switch( nSID )
{
case SID_EXTRUSION_DEPTH:
{
if( eState == SFX_ITEM_DISABLED )
{
implSetDepth( 0, false );
}
else
{
const SvxDoubleItem* pStateItem = PTR_CAST( SvxDoubleItem, pState );
if( pStateItem )
implSetDepth( pStateItem->GetValue(), true );
}
break;
}
case SID_ATTR_METRIC:
{
const SfxUInt16Item* pStateItem = PTR_CAST( SfxUInt16Item, pState );
if( pStateItem )
{
implFillStrings( (FieldUnit)pStateItem->GetValue() );
if( mfDepth >= 0.0 )
implSetDepth( mfDepth, mbEnabled );
}
}
}
}
// -----------------------------------------------------------------------
void ExtrusionDepthWindow::DataChanged( const DataChangedEvent& rDCEvt )
{
SfxPopupWindow::DataChanged( rDCEvt );
if( ( rDCEvt.GetType() == DATACHANGED_SETTINGS ) && ( rDCEvt.GetFlags() & SETTINGS_STYLE ) )
{
bool bHighContrast = GetDisplayBackground().GetColor().IsDark();
mpMenu->setEntryImage( 0, bHighContrast ? maImgDepth0h : maImgDepth0 );
mpMenu->setEntryImage( 1, bHighContrast ? maImgDepth1h : maImgDepth1 );
mpMenu->setEntryImage( 2, bHighContrast ? maImgDepth2h : maImgDepth2 );
mpMenu->setEntryImage( 3, bHighContrast ? maImgDepth3h : maImgDepth3 );
mpMenu->setEntryImage( 4, bHighContrast ? maImgDepth4h : maImgDepth4 );
mpMenu->setEntryImage( 5, bHighContrast ? maImgDepthInfinityh : maImgDepthInfinity );
}
}
// -----------------------------------------------------------------------
IMPL_LINK( ExtrusionDepthWindow, SelectHdl, void *, pControl )
{
// SfxDispatcher* pDisp = GetBindings().GetDispatcher();
int nSelected = mpMenu->getSelectedEntryId();
if( nSelected != -1 )
{
if( nSelected == 6 )
{
SvxDoubleItem aDepthItem( mfDepth, SID_EXTRUSION_DEPTH );
SfxUInt16Item aMetricItem( SID_ATTR_METRIC, meUnit );
rtl::OUString aCommand( RTL_CONSTASCII_USTRINGPARAM( ".uno:ExtrusionDepthDialog" ));
Any a;
Sequence< PropertyValue > aArgs( 2 );
aArgs[0].Name = rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "Depth" ));
aDepthItem.QueryValue( a );
aArgs[0].Value = a;
aArgs[1].Name = rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "Metric" ));
aMetricItem.QueryValue( a );
aArgs[1].Value = a;
SfxToolBoxControl::Dispatch( Reference< ::com::sun::star::frame::XDispatchProvider >(
mxFrame->getController(), UNO_QUERY ),
aCommand,
aArgs );
// pDisp->Execute( SID_EXTRUSION_DEPTH_DIALOG, SFX_CALLMODE_ASYNCHRON, &aDepthItem, &aMetricItem, NULL );
}
else
{
double fDepth;
if( nSelected == 5 )
{
fDepth = 338666.6;
}
else
{
fDepth = IsMetric( meUnit ) ? aDepthListMM[nSelected] : aDepthListInch[nSelected];
}
SvxDoubleItem aItem( fDepth, SID_EXTRUSION_DEPTH );
rtl::OUString aCommand( RTL_CONSTASCII_USTRINGPARAM( ".uno:ExtrusionDepth" ));
Any a;
INetURLObject aObj( aCommand );
Sequence< PropertyValue > aArgs( 1 );
aArgs[0].Name = aObj.GetURLPath();
aItem.QueryValue( a );
aArgs[0].Value = a;
SfxToolBoxControl::Dispatch( Reference< ::com::sun::star::frame::XDispatchProvider >(
mxFrame->getController(), UNO_QUERY ),
aCommand,
aArgs );
// pDisp->Execute( SID_EXTRUSION_DEPTH, SFX_CALLMODE_RECORD, &aItem, 0L , 0L );
implSetDepth( fDepth, true );
}
}
if ( IsInPopupMode() )
EndPopupMode();
return 0;
}
// -----------------------------------------------------------------------
void ExtrusionDepthWindow::StartSelection()
{
}
// -----------------------------------------------------------------------
BOOL ExtrusionDepthWindow::Close()
{
return SfxPopupWindow::Close();
}
// -----------------------------------------------------------------------
void ExtrusionDepthWindow::PopupModeEnd()
{
if( !mbInExecute )
{
if ( IsVisible() )
{
mbPopupMode = FALSE;
}
SfxPopupWindow::PopupModeEnd();
}
}
// -----------------------------------------------------------------------
void ExtrusionDepthWindow::GetFocus (void)
{
SfxPopupWindow::GetFocus();
// Grab the focus to the line ends value set so that it can be controlled
// with the keyboard.
if( mpMenu )
mpMenu->GrabFocus();
}
// ========================================================================
ExtrusionDepthControl::ExtrusionDepthControl(
USHORT nSlotId, USHORT nId, ToolBox &rTbx )
: SfxToolBoxControl( nSlotId, nId, rTbx )
{
rTbx.SetItemBits( nId, TIB_DROPDOWN | rTbx.GetItemBits( nId ) );
}
// -----------------------------------------------------------------------
ExtrusionDepthControl::~ExtrusionDepthControl()
{
}
// -----------------------------------------------------------------------
SfxPopupWindowType ExtrusionDepthControl::GetPopupWindowType() const
{
return SFX_POPUPWINDOW_ONCLICK;
}
// -----------------------------------------------------------------------
SfxPopupWindow* ExtrusionDepthControl::CreatePopupWindow()
{
ExtrusionDepthWindow* pWin = new ExtrusionDepthWindow( GetId(), m_xFrame );
pWin->StartPopupMode( &GetToolBox(), TRUE );
pWin->StartSelection();
SetPopupWindow( pWin );
return pWin;
}
// -----------------------------------------------------------------------
void ExtrusionDepthControl::StateChanged( USHORT nSID, SfxItemState eState, const SfxPoolItem* pState )
{
USHORT nId = GetId();
ToolBox& rTbx = GetToolBox();
rTbx.EnableItem( nId, SFX_ITEM_DISABLED != eState );
rTbx.SetItemState( nId, ( SFX_ITEM_DONTCARE == eState ) ? STATE_DONTKNOW : STATE_NOCHECK );
}
// ####################################################################
SFX_IMPL_TOOLBOX_CONTROL( ExtrusionLightingControl, SfxBoolItem );
ExtrusionLightingWindow::ExtrusionLightingWindow(
USHORT nId,
const ::com::sun::star::uno::Reference< ::com::sun::star::frame::XFrame >& rFrame ) :
SfxPopupWindow( nId,
rFrame,
SVX_RES( RID_SVXFLOAT_EXTRUSION_LIGHTING ) ),
maImgBright( SVX_RES( IMG_LIGHTING_BRIGHT ) ),
maImgNormal( SVX_RES( IMG_LIGHTING_NORMAL ) ),
maImgDim( SVX_RES( IMG_LIGHTING_DIM ) ),
maImgBrighth( SVX_RES( IMG_LIGHTING_BRIGHT_H ) ),
maImgNormalh( SVX_RES( IMG_LIGHTING_NORMAL_H ) ),
maImgDimh( SVX_RES( IMG_LIGHTING_DIM_H ) ),
mbPopupMode( true ),
mnLevel( 0 ),
mbLevelEnabled( false ),
mnDirection( FROM_FRONT ),
mbDirectionEnabled( false ),
mxFrame( rFrame )
{
SetHelpId( HID_POPUP_EXTRUSION_LIGHTING );
int i;
for( i = FROM_TOP_LEFT; i <= FROM_BOTTOM_RIGHT; i++ )
{
if( i != FROM_FRONT )
{
maImgLightingOff[i] = Image( SVX_RES( IMG_LIGHT_OFF + i ) );
maImgLightingOn[i] = Image( SVX_RES( IMG_LIGHT_ON + i ) );
maImgLightingOffh[i] = Image( SVX_RES( IMG_LIGHT_OFF_H + i ) );
maImgLightingOnh[i] = Image( SVX_RES( IMG_LIGHT_ON_H + i ) );
}
maImgLightingPreview[i] = Image( SVX_RES( IMG_LIGHT_PREVIEW + i ) );
maImgLightingPreviewh[i] = Image( SVX_RES( IMG_LIGHT_PREVIEW_H + i ) );
}
// mpLightingDirectionForewarder = new SfxStatusForwarder( SID_EXTRUSION_LIGHTING_DIRECTION, *this );
// mpLightingIntensityForewarder = new SfxStatusForwarder( SID_EXTRUSION_LIGHTING_INTENSITY, *this );
mpMenu = new ToolbarMenu( this, WB_CLIPCHILDREN );
mpMenu->SetHelpId( HID_MENU_EXTRUSION_LIGHTING );
mpMenu->SetSelectHdl( LINK( this, ExtrusionLightingWindow, SelectHdl ) );
mpLightingSet = new ValueSet( mpMenu, WB_TABSTOP | WB_MENUSTYLEVALUESET | WB_FLATVALUESET | WB_NOBORDER | WB_NO_DIRECTSELECT );
mpLightingSet->SetHelpId( HID_VALUESET_EXTRUSION_LIGHTING );
mpLightingSet->SetHelpId( HID_POPUP_LINEEND_CTRL );
mpLightingSet->SetSelectHdl( LINK( this, ExtrusionLightingWindow, SelectHdl ) );
mpLightingSet->SetColCount( 3 );
mpLightingSet->EnableFullItemMode( FALSE );
bool bHighContrast = GetDisplayBackground().GetColor().IsDark();
for( i = FROM_TOP_LEFT; i <= FROM_BOTTOM_RIGHT; i++ )
{
if( i != FROM_FRONT )
{
mpLightingSet->InsertItem( i+1, bHighContrast ? maImgLightingOffh[i] : maImgLightingOff[i] );
}
else
{
mpLightingSet->InsertItem( 5, bHighContrast ? maImgLightingPreviewh[FROM_FRONT] : maImgLightingPreview[FROM_FRONT] );
}
}
mpLightingSet->SetOutputSizePixel( Size( 72, 72 ) );
mpMenu->appendEntry( 3, mpLightingSet );
mpMenu->appendSeparator();
mpMenu->appendEntry( 0, String( SVX_RES( STR_BRIGHT ) ), bHighContrast ? maImgBrighth : maImgBright );
mpMenu->appendEntry( 1, String( SVX_RES( STR_NORMAL ) ), bHighContrast ? maImgNormalh : maImgNormal );
mpMenu->appendEntry( 2, String( SVX_RES( STR_DIM ) ), bHighContrast ? maImgDimh : maImgDim );
SetOutputSizePixel( mpMenu->getMenuSize() );
mpMenu->SetOutputSizePixel( GetOutputSizePixel() );
mpMenu->Show();
FreeResource();
AddStatusListener( rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( ".uno:ExtrusionLightingDirection" )));
AddStatusListener( rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( ".uno:ExtrusionLightingIntensity" )));
// rBindings.Update( SID_EXTRUSION_LIGHTING_DIRECTION );
// rBindings.Update( SID_EXTRUSION_LIGHTING_INTENSITY );
}
SfxPopupWindow* ExtrusionLightingWindow::Clone() const
{
return new ExtrusionLightingWindow( GetId(), mxFrame );
}
// -----------------------------------------------------------------------
ExtrusionLightingWindow::~ExtrusionLightingWindow()
{
// delete mpLightingDirectionForewarder;
// delete mpLightingIntensityForewarder;
delete mpMenu;
}
// -----------------------------------------------------------------------
void ExtrusionLightingWindow::implSetIntensity( int nLevel, bool bEnabled )
{
mnLevel = nLevel;
mbLevelEnabled = bEnabled;
int i = 0;
for( i = 0; i < 3; i++ )
{
mpMenu->checkEntry( i, (i == nLevel) && bEnabled );
mpMenu->enableEntry( i, bEnabled );
}
}
// -----------------------------------------------------------------------
void ExtrusionLightingWindow::implSetDirection( int nDirection, bool bEnabled )
{
mnDirection = nDirection;
mbDirectionEnabled = bEnabled;
bool bHighContrast = GetDisplayBackground().GetColor().IsDark();
if( !bEnabled )
nDirection = FROM_FRONT;
USHORT nItemId;
for( nItemId = FROM_TOP_LEFT; nItemId <= FROM_BOTTOM_RIGHT; nItemId++ )
{
if( nItemId == FROM_FRONT )
{
mpLightingSet->SetItemImage( nItemId + 1, bHighContrast ? maImgLightingPreviewh[ nDirection ] : maImgLightingPreview[ nDirection ] );
}
else
{
if( bHighContrast )
{
mpLightingSet->SetItemImage( nItemId + 1, (USHORT)nDirection == nItemId ? maImgLightingOnh[nItemId] : maImgLightingOffh[nItemId] );
}
else
{
mpLightingSet->SetItemImage( nItemId + 1, (USHORT)nDirection == nItemId ? maImgLightingOn[nItemId] : maImgLightingOff[nItemId] );
}
}
}
mpMenu->enableEntry( 3, bEnabled );
}
// -----------------------------------------------------------------------
void ExtrusionLightingWindow::StateChanged( USHORT nSID, SfxItemState eState, const SfxPoolItem* pState )
{
switch( nSID )
{
case SID_EXTRUSION_LIGHTING_INTENSITY:
{
if( eState == SFX_ITEM_DISABLED )
{
implSetIntensity( 0, false );
}
else
{
const SfxInt32Item* pStateItem = PTR_CAST( SfxInt32Item, pState );
if( pStateItem )
implSetIntensity( pStateItem->GetValue(), true );
}
break;
}
case SID_EXTRUSION_LIGHTING_DIRECTION:
{
if( eState == SFX_ITEM_DISABLED )
{
implSetDirection( 0, false );
}
else
{
const SfxInt32Item* pStateItem = PTR_CAST( SfxInt32Item, pState );
if( pStateItem )
implSetDirection( pStateItem->GetValue(), true );
}
break;
}
}
}
// -----------------------------------------------------------------------
void ExtrusionLightingWindow::DataChanged( const DataChangedEvent& rDCEvt )
{
SfxPopupWindow::DataChanged( rDCEvt );
if( ( rDCEvt.GetType() == DATACHANGED_SETTINGS ) && ( rDCEvt.GetFlags() & SETTINGS_STYLE ) )
{
bool bHighContrast = GetDisplayBackground().GetColor().IsDark();
implSetDirection( mnDirection, mbDirectionEnabled );
mpMenu->setEntryImage( 0, bHighContrast ? maImgBrighth : maImgBright );
mpMenu->setEntryImage( 1, bHighContrast ? maImgNormalh : maImgNormal );
mpMenu->setEntryImage( 2, bHighContrast ? maImgDimh : maImgDim );
}
}
// -----------------------------------------------------------------------
IMPL_LINK( ExtrusionLightingWindow, SelectHdl, void *, pControl )
{
if ( IsInPopupMode() )
EndPopupMode();
// SfxDispatcher* pDisp = GetBindings().GetDispatcher();
if( pControl == mpMenu )
{
int nLevel = mpMenu->getSelectedEntryId();
if( nLevel >= 0 )
{
if( nLevel != 3 )
{
SfxInt32Item aItem( SID_EXTRUSION_LIGHTING_INTENSITY, nLevel );
rtl::OUString aCommand( RTL_CONSTASCII_USTRINGPARAM( ".uno:ExtrusionLightingIntensity" ));
Any a;
INetURLObject aObj( aCommand );
Sequence< PropertyValue > aArgs( 1 );
aArgs[0].Name = aObj.GetURLPath();
aItem.QueryValue( a );
aArgs[0].Value = a;
SfxToolBoxControl::Dispatch( Reference< ::com::sun::star::frame::XDispatchProvider >(
mxFrame->getController(), UNO_QUERY ),
aCommand,
aArgs );
// pDisp->Execute( SID_EXTRUSION_LIGHTING_INTENSITY, SFX_CALLMODE_RECORD, &aItem, 0L , 0L );
implSetIntensity( nLevel, true );
}
}
}
else
{
sal_Int32 nDirection = mpLightingSet->GetSelectItemId();
if( (nDirection > 0) && (nDirection < 10) )
{
nDirection--;
SfxInt32Item aItem( SID_EXTRUSION_LIGHTING_DIRECTION, nDirection );
rtl::OUString aCommand( RTL_CONSTASCII_USTRINGPARAM( ".uno:ExtrusionLightingDirection" ));
Any a;
INetURLObject aObj( aCommand );
Sequence< PropertyValue > aArgs( 1 );
aArgs[0].Name = aObj.GetURLPath();
aItem.QueryValue( a );
aArgs[0].Value = a;
SfxToolBoxControl::Dispatch( Reference< ::com::sun::star::frame::XDispatchProvider >(
mxFrame->getController(), UNO_QUERY ),
aCommand,
aArgs );
// pDisp->Execute( SID_EXTRUSION_LIGHTING_DIRECTION, SFX_CALLMODE_RECORD, &aItem, 0L , 0L );
implSetDirection( nDirection, true );
}
}
return 0;
}
// -----------------------------------------------------------------------
void ExtrusionLightingWindow::StartSelection()
{
}
// -----------------------------------------------------------------------
BOOL ExtrusionLightingWindow::Close()
{
return SfxPopupWindow::Close();
}
// -----------------------------------------------------------------------
void ExtrusionLightingWindow::PopupModeEnd()
{
if ( IsVisible() )
{
mbPopupMode = FALSE;
}
SfxPopupWindow::PopupModeEnd();
}
// -----------------------------------------------------------------------
void ExtrusionLightingWindow::GetFocus (void)
{
SfxPopupWindow::GetFocus();
// Grab the focus to the line ends value set so that it can be controlled
// with the keyboard.
if( mpMenu )
mpMenu->GrabFocus();
}
// ========================================================================
ExtrusionLightingControl::ExtrusionLightingControl( USHORT nSlotId, USHORT nId, ToolBox &rTbx )
: SfxToolBoxControl( nSlotId, nId, rTbx )
{
rTbx.SetItemBits( nId, TIB_DROPDOWN | rTbx.GetItemBits( nId ) );
}
// -----------------------------------------------------------------------
ExtrusionLightingControl::~ExtrusionLightingControl()
{
}
// -----------------------------------------------------------------------
SfxPopupWindowType ExtrusionLightingControl::GetPopupWindowType() const
{
return SFX_POPUPWINDOW_ONCLICK;
}
// -----------------------------------------------------------------------
SfxPopupWindow* ExtrusionLightingControl::CreatePopupWindow()
{
ExtrusionLightingWindow* pWin = new ExtrusionLightingWindow( GetId(), m_xFrame );
pWin->StartPopupMode( &GetToolBox(), TRUE );
pWin->StartSelection();
SetPopupWindow( pWin );
return pWin;
}
// -----------------------------------------------------------------------
void ExtrusionLightingControl::StateChanged( USHORT nSID, SfxItemState eState, const SfxPoolItem* pState )
{
USHORT nId = GetId();
ToolBox& rTbx = GetToolBox();
rTbx.EnableItem( nId, SFX_ITEM_DISABLED != eState );
rTbx.SetItemState( nId, ( SFX_ITEM_DONTCARE == eState ) ? STATE_DONTKNOW : STATE_NOCHECK );
}
// ####################################################################
SFX_IMPL_TOOLBOX_CONTROL( ExtrusionSurfaceControl, SfxBoolItem );
ExtrusionSurfaceWindow::ExtrusionSurfaceWindow(
USHORT nId,
const ::com::sun::star::uno::Reference< ::com::sun::star::frame::XFrame >& rFrame ) :
SfxPopupWindow( nId,
rFrame,
SVX_RES( RID_SVXFLOAT_EXTRUSION_SURFACE )),
maImgSurface1( SVX_RES( IMG_WIRE_FRAME ) ),
maImgSurface2( SVX_RES( IMG_MATTE ) ),
maImgSurface3( SVX_RES( IMG_PLASTIC ) ),
maImgSurface4( SVX_RES( IMG_METAL ) ),
maImgSurface1h( SVX_RES( IMG_WIRE_FRAME_H ) ),
maImgSurface2h( SVX_RES( IMG_MATTE_H ) ),
maImgSurface3h( SVX_RES( IMG_PLASTIC_H ) ),
maImgSurface4h( SVX_RES( IMG_METAL_H ) ),
mbPopupMode( true ),
mxFrame( rFrame )
{
SetHelpId( HID_POPUP_EXTRUSION_SURFACE );
bool bHighContrast = GetDisplayBackground().GetColor().IsDark();
// mpSurfaceForewarder = new SfxStatusForwarder( SID_EXTRUSION_SURFACE, *this );
mpMenu = new ToolbarMenu( this, WB_CLIPCHILDREN );
mpMenu->SetHelpId( HID_MENU_EXTRUSION_SURFACE );
mpMenu->SetSelectHdl( LINK( this, ExtrusionSurfaceWindow, SelectHdl ) );
mpMenu->appendEntry( 0, String( SVX_RES( STR_WIREFRAME ) ), bHighContrast ? maImgSurface1h : maImgSurface1 );
mpMenu->appendEntry( 1, String( SVX_RES( STR_MATTE ) ), bHighContrast ? maImgSurface2h : maImgSurface2 );
mpMenu->appendEntry( 2, String( SVX_RES( STR_PLASTIC ) ), bHighContrast ? maImgSurface3h : maImgSurface3 );
mpMenu->appendEntry( 3, String( SVX_RES( STR_METAL ) ), bHighContrast ? maImgSurface4h : maImgSurface4 );
SetOutputSizePixel( mpMenu->getMenuSize() );
mpMenu->SetOutputSizePixel( GetOutputSizePixel() );
mpMenu->Show();
FreeResource();
AddStatusListener( rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( ".uno:ExtrusionSurface" )));
// rBindings.Update( SID_EXTRUSION_SURFACE );
}
SfxPopupWindow* ExtrusionSurfaceWindow::Clone() const
{
return new ExtrusionSurfaceWindow( GetId(), mxFrame );
}
// -----------------------------------------------------------------------
ExtrusionSurfaceWindow::~ExtrusionSurfaceWindow()
{
// delete mpSurfaceForewarder;
delete mpMenu;
}
// -----------------------------------------------------------------------
void ExtrusionSurfaceWindow::implSetSurface( int nSurface, bool bEnabled )
{
if( mpMenu )
{
int i;
for( i = 0; i < 4; i++ )
{
mpMenu->checkEntry( i, (i == nSurface) && bEnabled );
mpMenu->enableEntry( i, bEnabled );
}
}
}
// -----------------------------------------------------------------------
void ExtrusionSurfaceWindow::StateChanged( USHORT nSID, SfxItemState eState, const SfxPoolItem* pState )
{
switch( nSID )
{
case SID_EXTRUSION_SURFACE:
{
if( eState == SFX_ITEM_DISABLED )
{
implSetSurface( 0, false );
}
else
{
const SfxInt32Item* pStateItem = PTR_CAST( SfxInt32Item, pState );
if( pStateItem )
implSetSurface( pStateItem->GetValue(), true );
}
break;
}
}
}
// -----------------------------------------------------------------------
void ExtrusionSurfaceWindow::DataChanged( const DataChangedEvent& rDCEvt )
{
SfxPopupWindow::DataChanged( rDCEvt );
if( ( rDCEvt.GetType() == DATACHANGED_SETTINGS ) && ( rDCEvt.GetFlags() & SETTINGS_STYLE ) )
{
bool bHighContrast = GetDisplayBackground().GetColor().IsDark();
mpMenu->appendEntry( 0, String( SVX_RES( STR_WIREFRAME ) ), bHighContrast ? maImgSurface1h : maImgSurface1 );
mpMenu->appendEntry( 1, String( SVX_RES( STR_MATTE ) ), bHighContrast ? maImgSurface2h : maImgSurface2 );
mpMenu->appendEntry( 2, String( SVX_RES( STR_PLASTIC ) ), bHighContrast ? maImgSurface3h : maImgSurface3 );
mpMenu->appendEntry( 3, String( SVX_RES( STR_METAL ) ), bHighContrast ? maImgSurface4h : maImgSurface4 );
}
}
// -----------------------------------------------------------------------
IMPL_LINK( ExtrusionSurfaceWindow, SelectHdl, void *, pControl )
{
if ( IsInPopupMode() )
EndPopupMode();
// SfxDispatcher* pDisp = GetBindings().GetDispatcher();
sal_Int32 nSurface = mpMenu->getSelectedEntryId();
if( nSurface >= 0 )
{
SfxInt32Item aItem( SID_EXTRUSION_SURFACE, nSurface );
rtl::OUString aCommand( RTL_CONSTASCII_USTRINGPARAM( ".uno:ExtrusionSurface" ));
Any a;
INetURLObject aObj( aCommand );
Sequence< PropertyValue > aArgs( 1 );
aArgs[0].Name = aObj.GetURLPath();
aItem.QueryValue( a );
aArgs[0].Value = a;
SfxToolBoxControl::Dispatch( Reference< ::com::sun::star::frame::XDispatchProvider >(
mxFrame->getController(), UNO_QUERY ),
aCommand,
aArgs );
// pDisp->Execute( SID_EXTRUSION_SURFACE, SFX_CALLMODE_RECORD, &aItem, 0L , 0L );
implSetSurface( nSurface, true );
}
return 0;
}
// -----------------------------------------------------------------------
void ExtrusionSurfaceWindow::StartSelection()
{
}
// -----------------------------------------------------------------------
BOOL ExtrusionSurfaceWindow::Close()
{
return SfxPopupWindow::Close();
}
// -----------------------------------------------------------------------
void ExtrusionSurfaceWindow::PopupModeEnd()
{
if ( IsVisible() )
{
mbPopupMode = FALSE;
}
SfxPopupWindow::PopupModeEnd();
}
// -----------------------------------------------------------------------
void ExtrusionSurfaceWindow::GetFocus (void)
{
SfxPopupWindow::GetFocus();
// Grab the focus to the line ends value set so that it can be controlled
// with the keyboard.
if( mpMenu )
mpMenu->GrabFocus();
}
// ========================================================================
ExtrusionSurfaceControl::ExtrusionSurfaceControl(
USHORT nSlotId, USHORT nId, ToolBox &rTbx )
: SfxToolBoxControl( nSlotId, nId, rTbx )
{
rTbx.SetItemBits( nId, TIB_DROPDOWN | rTbx.GetItemBits( nId ) );
}
// -----------------------------------------------------------------------
ExtrusionSurfaceControl::~ExtrusionSurfaceControl()
{
}
// -----------------------------------------------------------------------
SfxPopupWindowType ExtrusionSurfaceControl::GetPopupWindowType() const
{
return SFX_POPUPWINDOW_ONCLICK;
}
// -----------------------------------------------------------------------
SfxPopupWindow* ExtrusionSurfaceControl::CreatePopupWindow()
{
ExtrusionSurfaceWindow* pWin = new ExtrusionSurfaceWindow( GetId(), m_xFrame );
pWin->StartPopupMode( &GetToolBox(), TRUE );
pWin->StartSelection();
SetPopupWindow( pWin );
return pWin;
}
// -----------------------------------------------------------------------
void ExtrusionSurfaceControl::StateChanged( USHORT nSID, SfxItemState eState, const SfxPoolItem* pState )
{
USHORT nId = GetId();
ToolBox& rTbx = GetToolBox();
rTbx.EnableItem( nId, SFX_ITEM_DISABLED != eState );
rTbx.SetItemState( nId, ( SFX_ITEM_DONTCARE == eState ) ? STATE_DONTKNOW : STATE_NOCHECK );
}
//========================================================================
SFX_IMPL_TOOLBOX_CONTROL( ExtrusionColorControl, SfxInt32Item );
ExtrusionColorControl::ExtrusionColorControl(
USHORT nSlotId, USHORT nId, ToolBox& rTbx )
: SfxToolBoxControl ( nSlotId, nId, rTbx )
{
rTbx.SetItemBits( nId, TIB_DROPDOWN | rTbx.GetItemBits( nId ) );
mpBtnUpdater = new SvxTbxButtonColorUpdater_Impl( nSlotId, nId, &GetToolBox(), TBX_UPDATER_MODE_CHAR_COLOR_NEW );
}
// -----------------------------------------------------------------------
ExtrusionColorControl::~ExtrusionColorControl()
{
delete mpBtnUpdater;
}
// -----------------------------------------------------------------------
SfxPopupWindowType ExtrusionColorControl::GetPopupWindowType() const
{
return SFX_POPUPWINDOW_ONCLICK;
}
// -----------------------------------------------------------------------
SfxPopupWindow* ExtrusionColorControl::CreatePopupWindow()
{
SvxColorWindow_Impl* pColorWin = new SvxColorWindow_Impl(
rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( ".uno:Extrusion3DColor" )),
SID_EXTRUSION_3D_COLOR,
m_xFrame,
SVX_RESSTR( RID_SVXSTR_EXTRUSION_COLOR ));
pColorWin->StartPopupMode( &GetToolBox(), FLOATWIN_POPUPMODE_GRABFOCUS|FLOATWIN_POPUPMODE_ALLOWTEAROFF );
pColorWin->StartSelection();
SetPopupWindow( pColorWin );
return pColorWin;
}
// -----------------------------------------------------------------------
void ExtrusionColorControl::StateChanged( USHORT nSID, SfxItemState eState, const SfxPoolItem* pState )
{
USHORT nId = GetId();
ToolBox& rTbx = GetToolBox();
if( nSID == SID_EXTRUSION_3D_COLOR )
{
const SvxColorItem* pItem = 0;
if( SFX_ITEM_DONTCARE != eState )
pItem = PTR_CAST( SvxColorItem, pState );
if ( pItem )
mpBtnUpdater->Update( pItem->GetValue());
}
rTbx.EnableItem( nId, SFX_ITEM_DISABLED != eState );
rTbx.SetItemState( nId, ( SFX_ITEM_DONTCARE == eState ) ? STATE_DONTKNOW : STATE_NOCHECK );
}