/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <svx/svdundo.hxx>
#include <sfx2/app.hxx>
#include <sfx2/request.hxx>
#include <sfx2/objface.hxx>
#include <sfx2/viewsh.hxx>
#include "svx/unoapi.hxx"
#include <com/sun/star/drawing/XShape.hpp>
#include <com/sun/star/drawing/XEnhancedCustomShapeDefaulter.hpp>
#include <svx/dialmgr.hxx>
#include <svx/svdoashp.hxx>
#include <svx/dialogs.hrc>
#include <svx/svdview.hxx>
#include <svx/sdasitm.hxx>
#include <com/sun/star/drawing/EnhancedCustomShapeAdjustmentValue.hpp>
#include <sfx2/bindings.hxx>
#include <editeng/eeitem.hxx>
#include <editeng/charscaleitem.hxx>
#include <editeng/kernitem.hxx>
#include <svx/sdrpaintwindow.hxx>
#include <svx/svxids.hrc>
#include <svx/fontworkbar.hxx>
#include "svx/fontworkgallery.hxx"
using namespace ::svx;
using namespace ::cppu;
using namespace ::com::sun::star;
using namespace ::com::sun::star::beans;
using namespace ::com::sun::star::uno;
void SetAlignmentState( SdrView* pSdrView, SfxItemSet& rSet )
{
const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
sal_uIntPtr nCount = rMarkList.GetMarkCount(), i;
sal_Int32 nAlignment = -1;
for( i = 0; i < nCount; i++ )
{
SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
if( pObj->ISA(SdrObjCustomShape) )
{
sal_Int32 nOldAlignment = nAlignment;
SdrTextHorzAdjustItem& rTextHorzAdjustItem = (SdrTextHorzAdjustItem&)pObj->GetMergedItem( SDRATTR_TEXT_HORZADJUST );
SdrTextFitToSizeTypeItem& rTextFitToSizeTypeItem = (SdrTextFitToSizeTypeItem&)pObj->GetMergedItem( SDRATTR_TEXT_FITTOSIZE );
switch ( rTextHorzAdjustItem.GetValue() )
{
case SDRTEXTHORZADJUST_LEFT : nAlignment = 0; break;
case SDRTEXTHORZADJUST_CENTER : nAlignment = 1; break;
case SDRTEXTHORZADJUST_RIGHT : nAlignment = 2; break;
case SDRTEXTHORZADJUST_BLOCK :
{
if ( rTextFitToSizeTypeItem.GetValue() == SDRTEXTFIT_NONE )
nAlignment = 3;
else if ( rTextFitToSizeTypeItem.GetValue() == SDRTEXTFIT_ALLLINES )
nAlignment = 4;
}
}
if ( ( nOldAlignment != -1 ) && ( nOldAlignment != nAlignment ) )
{
nAlignment = -1;
break;
}
}
}
rSet.Put( SfxInt32Item( SID_FONTWORK_ALIGNMENT, nAlignment ) );
}
void SetCharacterSpacingState( SdrView* pSdrView, SfxItemSet& rSet )
{
const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
sal_uIntPtr nCount = rMarkList.GetMarkCount(), i;
sal_Int32 nCharacterSpacing = -1;
for( i = 0; i < nCount; i++ )
{
SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
if( pObj->ISA(SdrObjCustomShape) )
{
sal_Int32 nOldCharacterSpacing = nCharacterSpacing;
SvxCharScaleWidthItem& rCharScaleWidthItem = (SvxCharScaleWidthItem&)pObj->GetMergedItem( EE_CHAR_FONTWIDTH );
nCharacterSpacing = rCharScaleWidthItem.GetValue();
if ( ( nOldCharacterSpacing != -1 ) && ( nOldCharacterSpacing != nCharacterSpacing ) )
{
nCharacterSpacing = -1;
break;
}
}
}
rSet.Put( SfxInt32Item( SID_FONTWORK_CHARACTER_SPACING, nCharacterSpacing ) );
}
void SetKernCharacterPairsState( SdrView* pSdrView, SfxItemSet& rSet )
{
const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
sal_uIntPtr nCount = rMarkList.GetMarkCount(), i;
bool bChecked = false;
for( i = 0; i < nCount; i++ )
{
SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
if( pObj->ISA(SdrObjCustomShape) )
{
SvxKerningItem& rKerningItem = (SvxKerningItem&)pObj->GetMergedItem( EE_CHAR_KERNING );
if ( rKerningItem.GetValue() )
bChecked = true;
}
}
rSet.Put( SfxBoolItem( SID_FONTWORK_KERN_CHARACTER_PAIRS, bChecked ) );
}
void SetFontWorkShapeTypeState( SdrView* pSdrView, SfxItemSet& rSet )
{
const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
sal_uIntPtr nCount = rMarkList.GetMarkCount(), i;
OUString aFontWorkShapeType;
for( i = 0; i < nCount; i++ )
{
SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
if( pObj->ISA( SdrObjCustomShape ) )
{
const OUString sType( "Type" );
SdrCustomShapeGeometryItem aGeometryItem( (SdrCustomShapeGeometryItem&)pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
Any* pAny = aGeometryItem.GetPropertyValueByName( sType );
if( pAny )
{
OUString aType;
if ( *pAny >>= aType )
{
if ( !aFontWorkShapeType.isEmpty() )
{
if ( !aFontWorkShapeType.equals( aType ) ) // different FontWorkShapeTypes selected ?
{
aFontWorkShapeType = OUString();
break;
}
}
aFontWorkShapeType = aType;
}
}
}
}
rSet.Put( SfxStringItem( SID_FONTWORK_SHAPE_TYPE, aFontWorkShapeType ) );
}
// Standardinterface deklarieren (Die Slotmap darf nicht leer sein, also
// tragen wir etwas ein, was hier (hoffentlich) nie vorkommt).
SFX_SLOTMAP(FontworkBar)
{
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
};
SFX_IMPL_INTERFACE(FontworkBar, SfxShell, SVX_RES(RID_SVX_FONTWORK_BAR))
void FontworkBar::InitInterface_Impl()
{
GetStaticInterface()->RegisterObjectBar(SFX_OBJECTBAR_OBJECT, SVX_RES(RID_SVX_FONTWORK_BAR));
}
TYPEINIT1( FontworkBar, SfxShell );
FontworkBar::FontworkBar(SfxViewShell* pViewShell )
: SfxShell(pViewShell)
{
DBG_ASSERT( pViewShell, "svx::FontworkBar::FontworkBar(), I need a viewshell!" );
if( pViewShell )
SetPool(&pViewShell->GetPool());
SetHelpId( SVX_INTERFACE_FONTWORK_BAR );
SetName( SVX_RESSTR( RID_SVX_FONTWORK_BAR ));
}
FontworkBar::~FontworkBar()
{
SetRepeatTarget(NULL);
}
static Window* ImpGetViewWin(SdrView* pView)
{
if( pView )
{
const sal_uInt32 nAnz(pView->PaintWindowCount());
for(sal_uInt32 nNum(0L); nNum < nAnz; nNum++)
{
OutputDevice* pOut = &(pView->GetPaintWindow(nNum)->GetOutputDevice());
if(OUTDEV_WINDOW == pOut->GetOutDevType())
{
return (Window*)pOut;
}
}
}
return 0L;
}
namespace svx {
bool checkForSelectedFontWork( SdrView* pSdrView, sal_uInt32& nCheckStatus )
{
if ( nCheckStatus & 2 )
return ( nCheckStatus & 1 ) != 0;
static const OUString sTextPath( "TextPath" );
const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
sal_uIntPtr nCount = rMarkList.GetMarkCount(), i;
bool bFound = false;
for(i=0;(i<nCount) && !bFound ; i++)
{
SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
if( pObj->ISA(SdrObjCustomShape) )
{
SdrCustomShapeGeometryItem aGeometryItem( (SdrCustomShapeGeometryItem&)pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
Any* pAny = aGeometryItem.GetPropertyValueByName( sTextPath, sTextPath );
if( pAny )
*pAny >>= bFound;
}
}
if ( bFound )
nCheckStatus |= 1;
nCheckStatus |= 2;
return bFound;
}
}
static void impl_execute( SdrView*, SfxRequest& rReq, SdrCustomShapeGeometryItem& rGeometryItem, SdrObject* pObj )
{
static const OUString sTextPath( "TextPath" );
static const OUString sSameLetterHeights( "SameLetterHeights" );
sal_uInt16 nSID = rReq.GetSlot();
switch( nSID )
{
case SID_FONTWORK_SAME_LETTER_HEIGHTS:
{
com::sun::star::uno::Any* pAny = rGeometryItem.GetPropertyValueByName( sTextPath, sSameLetterHeights );
if( pAny )
{
bool bOn = false;
(*pAny) >>= bOn;
bOn = !bOn;
(*pAny) <<= bOn;
}
}
break;
case SID_FONTWORK_ALIGNMENT:
{
if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_FONTWORK_ALIGNMENT ) == SFX_ITEM_SET )
{
sal_Int32 nValue = ((const SfxInt32Item*)rReq.GetArgs()->GetItem(SID_FONTWORK_ALIGNMENT))->GetValue();
if ( ( nValue >= 0 ) && ( nValue < 5 ) )
{
SdrFitToSizeType eFTS = SDRTEXTFIT_NONE;
SdrTextHorzAdjust eHorzAdjust;
switch ( nValue )
{
case 4 : eFTS = SDRTEXTFIT_ALLLINES; // passthrough
case 3 : eHorzAdjust = SDRTEXTHORZADJUST_BLOCK; break;
default: eHorzAdjust = SDRTEXTHORZADJUST_LEFT; break;
case 1 : eHorzAdjust = SDRTEXTHORZADJUST_CENTER; break;
case 2 : eHorzAdjust = SDRTEXTHORZADJUST_RIGHT; break;
}
pObj->SetMergedItem( SdrTextHorzAdjustItem( eHorzAdjust ) );
pObj->SetMergedItem( SdrTextFitToSizeTypeItem( eFTS ) );
pObj->BroadcastObjectChange();
}
}
}
break;
case SID_FONTWORK_CHARACTER_SPACING:
{
if( rReq.GetArgs() && ( rReq.GetArgs()->GetItemState( SID_FONTWORK_CHARACTER_SPACING ) == SFX_ITEM_SET ) )
{
sal_Int32 nCharSpacing = ((const SfxInt32Item*)rReq.GetArgs()->GetItem(SID_FONTWORK_CHARACTER_SPACING))->GetValue();
pObj->SetMergedItem( SvxCharScaleWidthItem( (sal_uInt16)nCharSpacing, EE_CHAR_FONTWIDTH ) );
pObj->BroadcastObjectChange();
}
}
break;
case SID_FONTWORK_KERN_CHARACTER_PAIRS:
{
if( rReq.GetArgs() && ( rReq.GetArgs()->GetItemState( SID_FONTWORK_KERN_CHARACTER_PAIRS ) == SFX_ITEM_SET ) )
{
// sal_Bool bKernCharacterPairs = ((const SfxBoolItem*)rReq.GetArgs()->GetItem(SID_FONTWORK_KERN_CHARACTER_PAIRS))->GetValue();
//TODO: pObj->SetMergedItem( SvxCharScaleWidthItem( (sal_uInt16)nCharSpacing, EE_CHAR_FONTWIDTH ) );
pObj->BroadcastObjectChange();
}
}
break;
}
}
#include "svx/gallery.hxx"
#include <svx/fmmodel.hxx>
#include <svx/fmpage.hxx>
#include <svl/itempool.hxx>
void GetGeometryForCustomShape( SdrCustomShapeGeometryItem& rGeometryItem, const OUString& rCustomShape )
{
const OUString sType( "Type" );
com::sun::star::beans::PropertyValue aPropVal;
aPropVal.Name = sType;
aPropVal.Value <<= rCustomShape;
rGeometryItem.SetPropertyValue( aPropVal );
const OUString sAdjustmentValues( "AdjustmentValues" );
const OUString sCoordinateOrigin( "CoordinateOrigin" );
const OUString sCoordinateSize( "CoordinateSize" );
const OUString sEquations( "Equations" );
const OUString sHandles( "Handles" );
const OUString sPath( "Path" );
rGeometryItem.ClearPropertyValue( sAdjustmentValues );
rGeometryItem.ClearPropertyValue( sCoordinateOrigin );
rGeometryItem.ClearPropertyValue( sCoordinateSize );
rGeometryItem.ClearPropertyValue( sEquations );
rGeometryItem.ClearPropertyValue( sHandles );
rGeometryItem.ClearPropertyValue( sPath );
/* SJ: CustomShapes that are available in the gallery are having the highest
priority, so we will take a look there before taking the internal default */
if ( GalleryExplorer::GetSdrObjCount( GALLERY_THEME_POWERPOINT ) )
{
std::vector< OUString > aObjList;
if ( GalleryExplorer::FillObjListTitle( GALLERY_THEME_POWERPOINT, aObjList ) )
{
sal_uInt16 i;
for ( i = 0; i < aObjList.size(); i++ )
{
if ( aObjList[ i ].equalsIgnoreAsciiCase( rCustomShape ) )
{
FmFormModel aFormModel;
SfxItemPool& rPool = aFormModel.GetItemPool();
rPool.FreezeIdRanges();
if ( GalleryExplorer::GetSdrObj( GALLERY_THEME_POWERPOINT, i, &aFormModel ) )
{
const SdrObject* pSourceObj = aFormModel.GetPage( 0 )->GetObj( 0 );
if( pSourceObj )
{
PropertyValue aPropVal_;
SdrCustomShapeGeometryItem& rSourceGeometry = (SdrCustomShapeGeometryItem&)pSourceObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY );
com::sun::star::uno::Any* pAny = rSourceGeometry.GetPropertyValueByName( sType );
if ( pAny )
{
aPropVal_.Name = sType;
aPropVal_.Value = *pAny;
rGeometryItem.SetPropertyValue( aPropVal_ );
}
pAny = rSourceGeometry.GetPropertyValueByName( sAdjustmentValues );
if ( pAny )
{
aPropVal_.Name = sAdjustmentValues;
aPropVal_.Value = *pAny;
rGeometryItem.SetPropertyValue( aPropVal_ );
}
pAny = rSourceGeometry.GetPropertyValueByName( sCoordinateOrigin );
if ( pAny )
{
aPropVal_.Name = sCoordinateOrigin;
aPropVal_.Value = *pAny;
rGeometryItem.SetPropertyValue( aPropVal_ );
}
pAny = rSourceGeometry.GetPropertyValueByName( sCoordinateSize );
if ( pAny )
{
aPropVal_.Name = sCoordinateSize;
aPropVal_.Value = *pAny;
rGeometryItem.SetPropertyValue( aPropVal_ );
}
pAny = rSourceGeometry.GetPropertyValueByName( sEquations );
if ( pAny )
{
aPropVal_.Name = sEquations;
aPropVal_.Value = *pAny;
rGeometryItem.SetPropertyValue( aPropVal_ );
}
pAny = rSourceGeometry.GetPropertyValueByName( sHandles );
if ( pAny )
{
aPropVal_.Name = sHandles;
aPropVal_.Value = *pAny;
rGeometryItem.SetPropertyValue( aPropVal_ );
}
pAny = rSourceGeometry.GetPropertyValueByName( sPath );
if ( pAny )
{
aPropVal_.Name = sPath;
aPropVal_.Value = *pAny;
rGeometryItem.SetPropertyValue( aPropVal_ );
}
}
}
}
}
}
}
}
void FontworkBar::execute( SdrView* pSdrView, SfxRequest& rReq, SfxBindings& rBindings )
{
sal_uInt16 nStrResId = 0;
sal_uInt16 nSID = rReq.GetSlot();
switch( nSID )
{
case SID_FONTWORK_GALLERY_FLOATER:
{
FontWorkGalleryDialog aDlg( pSdrView, ImpGetViewWin(pSdrView), nSID );
aDlg.Execute();
}
break;
case SID_FONTWORK_SHAPE_TYPE:
{
OUString aCustomShape;
const SfxItemSet* pArgs = rReq.GetArgs();
if ( pArgs )
{
const SfxStringItem& rItm = (const SfxStringItem&)pArgs->Get( rReq.GetSlot() );
aCustomShape = rItm.GetValue();
}
if ( !aCustomShape.isEmpty() )
{
const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
sal_uInt32 nCount = rMarkList.GetMarkCount(), i;
for( i = 0; i < nCount; i++ )
{
SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
if( pObj->ISA(SdrObjCustomShape) )
{
const bool bUndo = pSdrView->IsUndoEnabled();
if( bUndo )
{
OUString aStr( SVX_RESSTR( RID_SVXSTR_UNDO_APPLY_FONTWORK_SHAPE ) );
pSdrView->BegUndo( aStr );
pSdrView->AddUndo( pSdrView->GetModel()->GetSdrUndoFactory().CreateUndoAttrObject( *pObj ) );
}
SdrCustomShapeGeometryItem aGeometryItem( (SdrCustomShapeGeometryItem&)pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
GetGeometryForCustomShape( aGeometryItem, aCustomShape );
pObj->SetMergedItem( aGeometryItem );
Reference< drawing::XShape > aXShape = GetXShapeForSdrObject( (SdrObjCustomShape*)pObj );
if ( aXShape.is() )
{
Reference< drawing::XEnhancedCustomShapeDefaulter > xDefaulter( aXShape, UNO_QUERY );
if( xDefaulter.is() )
xDefaulter->createCustomShapeDefaults( aCustomShape );
}
pObj->BroadcastObjectChange();
if( bUndo )
pSdrView->EndUndo();
pSdrView->AdjustMarkHdl(); //HMH sal_True );
rBindings.Invalidate( SID_FONTWORK_SHAPE_TYPE );
}
}
}
}
break;
case SID_FONTWORK_CHARACTER_SPACING_DIALOG :
{
if( rReq.GetArgs() && ( rReq.GetArgs()->GetItemState( SID_FONTWORK_CHARACTER_SPACING ) == SFX_ITEM_SET ) )
{
sal_Int32 nCharSpacing = ((const SfxInt32Item*)rReq.GetArgs()->GetItem(SID_FONTWORK_CHARACTER_SPACING))->GetValue();
FontworkCharacterSpacingDialog aDlg( 0L, nCharSpacing );
sal_uInt16 nRet = aDlg.Execute();
if( nRet != 0 )
{
SfxInt32Item aItem( SID_FONTWORK_CHARACTER_SPACING, aDlg.getScale() );
SfxPoolItem* aItems[] = { &aItem, 0 };
rBindings.Execute( SID_FONTWORK_CHARACTER_SPACING, (const SfxPoolItem**)aItems );
}
}
}
break;
case SID_FONTWORK_SHAPE:
case SID_FONTWORK_ALIGNMENT:
{
if ( !nStrResId )
nStrResId = RID_SVXSTR_UNDO_APPLY_FONTWORK_ALIGNMENT;
} // PASSTROUGH
case SID_FONTWORK_CHARACTER_SPACING:
{
if ( !nStrResId )
nStrResId = RID_SVXSTR_UNDO_APPLY_FONTWORK_CHARACTER_SPACING;
} // PASSTROUGH
case SID_FONTWORK_KERN_CHARACTER_PAIRS:
{
if ( !nStrResId )
nStrResId = RID_SVXSTR_UNDO_APPLY_FONTWORK_CHARACTER_SPACING;
} // PASSTROUGH
case SID_FONTWORK_SAME_LETTER_HEIGHTS:
{
if ( !nStrResId )
nStrResId = RID_SVXSTR_UNDO_APPLY_FONTWORK_SAME_LETTER_HEIGHT;
const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
sal_uIntPtr nCount = rMarkList.GetMarkCount(), i;
for( i = 0; i < nCount; i++ )
{
SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
if( pObj->ISA(SdrObjCustomShape) )
{
const bool bUndo = pSdrView->IsUndoEnabled();
if( bUndo )
{
OUString aStr( SVX_RESSTR( nStrResId ) );
pSdrView->BegUndo( aStr );
pSdrView->AddUndo( pSdrView->GetModel()->GetSdrUndoFactory().CreateUndoAttrObject( *pObj ) );
}
SdrCustomShapeGeometryItem aGeometryItem( (SdrCustomShapeGeometryItem&)pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
impl_execute( pSdrView, rReq, aGeometryItem, pObj );
pObj->SetMergedItem( aGeometryItem );
pObj->BroadcastObjectChange();
if( bUndo )
pSdrView->EndUndo();
}
}
}
break;
};
}
void FontworkBar::getState( SdrView* pSdrView, SfxItemSet& rSet )
{
sal_uInt32 nCheckStatus = 0;
if ( rSet.GetItemState( SID_FONTWORK_ALIGNMENT_FLOATER ) != SFX_ITEM_UNKNOWN )
{
if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
rSet.DisableItem( SID_FONTWORK_ALIGNMENT_FLOATER );
}
if ( rSet.GetItemState( SID_FONTWORK_ALIGNMENT ) != SFX_ITEM_UNKNOWN )
{
if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
rSet.DisableItem( SID_FONTWORK_ALIGNMENT );
else
SetAlignmentState( pSdrView, rSet );
}
if ( rSet.GetItemState( SID_FONTWORK_CHARACTER_SPACING_FLOATER ) != SFX_ITEM_UNKNOWN )
{
if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
rSet.DisableItem( SID_FONTWORK_CHARACTER_SPACING_FLOATER );
}
if ( rSet.GetItemState( SID_FONTWORK_CHARACTER_SPACING ) != SFX_ITEM_UNKNOWN )
{
if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
rSet.DisableItem( SID_FONTWORK_CHARACTER_SPACING );
else
SetCharacterSpacingState( pSdrView, rSet );
}
if ( rSet.GetItemState( SID_FONTWORK_KERN_CHARACTER_PAIRS ) != SFX_ITEM_UNKNOWN )
{
if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
rSet.DisableItem( SID_FONTWORK_KERN_CHARACTER_PAIRS );
else
SetKernCharacterPairsState( pSdrView, rSet );
}
if ( rSet.GetItemState( SID_FONTWORK_SAME_LETTER_HEIGHTS ) != SFX_ITEM_UNKNOWN )
{
if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
rSet.DisableItem( SID_FONTWORK_SAME_LETTER_HEIGHTS );
}
if ( rSet.GetItemState( SID_FONTWORK_SHAPE_TYPE ) != SFX_ITEM_UNKNOWN )
{
if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
rSet.DisableItem( SID_FONTWORK_SHAPE_TYPE );
else
SetFontWorkShapeTypeState( pSdrView, rSet );
}
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */