/************************************************************************* * * $RCSfile: format.hxx,v $ * * $Revision: 1.9 $ * * last change: $Author: ama $ $Date: 2001-04-10 14:12:50 $ * * The Contents of this file are made available subject to the terms of * either of the following licenses * * - GNU Lesser General Public License Version 2.1 * - Sun Industry Standards Source License Version 1.1 * * Sun Microsystems Inc., October, 2000 * * GNU Lesser General Public License Version 2.1 * ============================================= * Copyright 2000 by Sun Microsystems, Inc. * 901 San Antonio Road, Palo Alto, CA 94303, USA * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License version 2.1, as published by the Free Software Foundation. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * * * Sun Industry Standards Source License Version 1.1 * ================================================= * The contents of this file are subject to the Sun Industry Standards * Source License Version 1.1 (the "License"); You may not use this file * except in compliance with the License. You may obtain a copy of the * License at http://www.openoffice.org/license.html. * * Software provided under this License is provided on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, * WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS, * MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING. * See the License for the specific provisions governing your rights and * obligations concerning the Software. * * The Initial Developer of the Original Code is: Sun Microsystems, Inc. * * Copyright: 2000 by Sun Microsystems, Inc. * * All Rights Reserved. * * Contributor(s): _______________________________________ * * ************************************************************************/ #ifndef _FORMAT_HXX #define _FORMAT_HXX #ifndef _SOLAR_H #include #endif #ifndef _ERRHDL_HXX #include // fuer ASSERT #endif #ifndef _SWATRSET_HXX #include // fuer SfxItemPool/-Set, Attr forward decl. #endif #ifndef _CALBCK_HXX #include // fuer SwModify #endif #ifndef _HINTIDS_HXX #include #endif class SwDoc; class SwFmt : public SwModify { friend class SwSwgReader; friend class SwSwgWriter; String aFmtName; SwAttrSet aSet; USHORT nWhichId; USHORT nFmtId; // Format-ID fuer Lesen/Schreiben USHORT nPoolFmtId; // Id-fuer "automatich" erzeugte Formate // (ist keine harte Attributierung !!) USHORT nPoolHelpId; // HelpId fuer diese Pool-Vorlage BYTE nPoolHlpFileId; // FilePos ans Doc auf die Vorlagen-Hilfen BOOL bWritten : 1; // TRUE: bereits geschrieben BOOL bAutoFmt : 1; // FALSE: es handelt sich um eine Vorlage // ist dflt immer auf TRUE ! BOOL bFmtInDTOR : 1; // TRUE: das Format wird geloscht. Damit man in // der FmtChg-Message das erkennen kann!!! BOOL bAutoUpdateFmt : 1; // TRUE: am Format werden die Attribute // eines kompletten Absatzes gesetzt (UI-seitig!) BOOL bLayerFmt : 1; // nur fuer SwFrmFmt ( LAYER_IMPL ) protected: SwFmt( SwAttrPool& rPool, const sal_Char* pFmtNm, const USHORT* pWhichRanges, SwFmt *pDrvdFrm, USHORT nFmtWhich ); SwFmt( SwAttrPool& rPool, const String &rFmtNm, const USHORT* pWhichRanges, SwFmt *pDrvdFrm, USHORT nFmtWhich ); SwFmt( SwAttrPool& rPool, const String &rFmtNm, USHORT nWhich1, USHORT nWhich2, SwFmt *pDrvdFrm, USHORT nFmtWhich ); SwFmt( const SwFmt& rFmt ); public: TYPEINFO(); //Bereits in Basisklasse Client drin. virtual ~SwFmt(); SwFmt &operator=(const SwFmt&); // fuer die Abfrage der Writer-Funktionen USHORT Which() const { return nWhichId; } virtual void Modify( SfxPoolItem* pOldValue, SfxPoolItem* pNewValue ); // erfrage vom Format Informationen virtual BOOL GetInfo( SfxPoolItem& ) const; // kopiere Attribute; auch ueber Dokumentgrenzen hinweg void CopyAttrs( const SwFmt&, BOOL bReplace=TRUE ); // loesche alle Attribute, die nicht in rFmt stehen void DelDiffs( const SfxItemSet& rSet ); void DelDiffs( const SwFmt& rFmt ) { DelDiffs( rFmt.GetAttrSet() ); } // Umhaengen des Formats (0 = Default) BOOL SetDerivedFrom(SwFmt *pDerivedFrom = 0); // Ist bInParents FALSE, // wird nur in diesem Format nach dem Attribut gesucht. inline const SfxPoolItem& GetAttr( USHORT nWhich, BOOL bInParents = TRUE ) const; inline SfxItemState GetItemState( USHORT nWhich, BOOL bSrchInParent = TRUE, const SfxPoolItem **ppItem = 0 ) const; BOOL SetAttr( const SfxPoolItem& ); BOOL SetAttr( const SfxItemSet& rSet ); // Nimmt den Hint mit nWhich aus dem Delta-Array BOOL ResetAttr( USHORT nWhich1, USHORT nWhich2 = 0 ); // Nimmt alle Hints aus dem Delta-Array, // liefert die Anzahl der geloeschten Hints USHORT ResetAllAttr(); inline SwFmt* DerivedFrom() const { return (SwFmt*)pRegisteredIn; } inline BOOL IsDefault() const { return DerivedFrom() == 0; } inline const String& GetName() const { return aFmtName; } inline void SetName( const String& rNewName ); inline void SetName( const sal_Char* pNewName ); // zur Abfrage des Attribute Arrays inline const SwAttrSet& GetAttrSet() const { return aSet; } // Das Doc wird jetzt am SwAttrPool gesetzt. Dadurch hat man es immer // im Zugriff. const SwDoc *GetDoc() const { return aSet.GetDoc(); } SwDoc *GetDoc() { return aSet.GetDoc(); } // erfragen und setzen der Poolvorlagen-Id's USHORT GetPoolFmtId() const { return nPoolFmtId; } void SetPoolFmtId( USHORT nId ) { nPoolFmtId = nId; } // erfragen und setzen der Hilfe-Id's fuer die Document-Vorlagen USHORT GetPoolHelpId() const { return nPoolHelpId; } void SetPoolHelpId( USHORT nId ) { nPoolHelpId = nId; } BYTE GetPoolHlpFileId() const { return nPoolHlpFileId; } void SetPoolHlpFileId( BYTE nId ) { nPoolHlpFileId = nId; } // erfrage die Attribut-Beschreibung, returnt den reingereichten String void GetPresentation( SfxItemPresentation ePres, SfxMapUnit eCoreMetric, SfxMapUnit ePresMetric, String &rText ) const { aSet.GetPresentation( ePres, eCoreMetric, ePresMetric, rText ); } // Das Format-ID fuer Lesen/Schreiben: USHORT GetFmtId() const { return nFmtId; } void SetWritten() { bWritten = TRUE; } void ResetWritten() { bWritten = FALSE; } BOOL IsWritten() const { return bWritten; } // Abfragen/Setzen vom AutoFmt-Flag BOOL IsAuto() const { return bAutoFmt; } void SetAuto( BOOL bNew = FALSE ) { bAutoFmt = bNew; } // Abfragen/Setzen vom bAutoUpdateFmt-Flag BOOL IsAutoUpdateFmt() const { return bAutoUpdateFmt; } void SetAutoUpdateFmt( BOOL bNew = TRUE ) { bAutoUpdateFmt = bNew; } BOOL IsFmtInDTOR() const { return bFmtInDTOR; } BOOL IsLayerFmt() const { return bLayerFmt; } void SetLayerFmt( BOOL bNew ) { bLayerFmt = bNew; } BOOL IsFrmFmt() const { return nWhichId == RES_FLYFRMFMT || nWhichId == RES_DRAWFRMFMT|| nWhichId == RES_FRMFMT; } // GetMethoden: das Bool gibt an, ob nur im Set (FALSE) oder auch in // den Parents gesucht werden soll. Wird nichts gefunden, // wird das deflt. Attribut returnt. // Charakter-Attribute - impl. steht im charatr.hxx // AMA 12.10.94: Umstellung von SwFmt... auf Svx... inline const SvxPostureItem &GetPosture( BOOL = TRUE ) const; inline const SvxWeightItem &GetWeight( BOOL = TRUE ) const; inline const SvxShadowedItem &GetShadowed( BOOL = TRUE ) const; inline const SvxAutoKernItem &GetAutoKern( BOOL = TRUE ) const; inline const SvxWordLineModeItem &GetWordLineMode( BOOL = TRUE ) const; inline const SvxContourItem &GetContour( BOOL = TRUE ) const; inline const SvxKerningItem &GetKerning( BOOL = TRUE ) const; inline const SvxUnderlineItem &GetUnderline( BOOL = TRUE ) const; inline const SvxCrossedOutItem &GetCrossedOut( BOOL = TRUE ) const; inline const SvxFontHeightItem &GetSize( BOOL = TRUE ) const; inline const SvxPropSizeItem &GetPropSize( BOOL = TRUE ) const; inline const SvxFontItem &GetFont( BOOL = TRUE ) const; inline const SvxColorItem &GetColor( BOOL = TRUE ) const; inline const SvxCharSetColorItem &GetCharSetColor( BOOL = TRUE ) const; inline const SvxLanguageItem &GetLanguage( BOOL = TRUE ) const; inline const SvxEscapementItem &GetEscapement( BOOL = TRUE ) const; inline const SvxCaseMapItem &GetCaseMap( BOOL = TRUE ) const; inline const SvxNoHyphenItem &GetNoHyphenHere( BOOL = TRUE ) const; inline const SvxBlinkItem &GetBlink( BOOL = TRUE ) const; inline const SvxBrushItem &GetChrBackground( BOOL = TRUE ) const; inline const SvxFontItem &GetCJKFont( BOOL = TRUE ) const; inline const SvxFontHeightItem &GetCJKSize( BOOL = TRUE ) const; inline const SvxLanguageItem &GetCJKLanguage( BOOL = TRUE ) const; inline const SvxPostureItem &GetCJKPosture( BOOL = TRUE ) const; inline const SvxWeightItem &GetCJKWeight( BOOL = TRUE ) const; inline const SvxFontItem &GetCTLFont( BOOL = TRUE ) const; inline const SvxFontHeightItem &GetCTLSize( BOOL = TRUE ) const; inline const SvxLanguageItem &GetCTLLanguage( BOOL = TRUE ) const; inline const SvxPostureItem &GetCTLPosture( BOOL = TRUE ) const; inline const SvxWeightItem &GetCTLWeight( BOOL = TRUE ) const; inline const SfxBoolItem &GetWritingDirection( BOOL = TRUE ) const; inline const SvxEmphasisMarkItem &GetEmphasisMark( BOOL = TRUE ) const; inline const SvxTwoLinesItem &Get2Lines( BOOL = TRUE ) const; inline const SvxCharScaleWidthItem &GetCharScaleW( BOOL = TRUE ) const; inline const SvxCharRotateItem &GetCharRotate( BOOL = TRUE ) const; inline const SvxCharReliefItem &GetCharRelief( BOOL = TRUE ) const; // Frame-Attribute - impl. steht im frmatr.hxx, // fuer LINUX, SINIX, HPUX auch in gcc_outl.cxx #if ( defined GCC && defined C272 && \ ( defined LINUX || defined SINIX || defined HPUX )) const SwFmtFillOrder &GetFillOrder( BOOL = TRUE ) const; const SwFmtFrmSize &GetFrmSize( BOOL = TRUE ) const; const SwFmtHeader &GetHeader( BOOL = TRUE ) const; const SwFmtFooter &GetFooter( BOOL = TRUE ) const; const SwFmtSurround &GetSurround( BOOL = TRUE ) const; const SwFmtHoriOrient &GetHoriOrient( BOOL = TRUE ) const; const SwFmtAnchor &GetAnchor( BOOL = TRUE ) const; const SwFmtCol &GetCol( BOOL = TRUE ) const; #endif #if ( defined GCC && defined C272 && defined HPUX ) const SvxPaperBinItem &GetPaperBin( BOOL = TRUE ) const; const SvxLRSpaceItem &GetLRSpace( BOOL = TRUE ) const; const SvxULSpaceItem &GetULSpace( BOOL = TRUE ) const; const SwFmtCntnt &GetCntnt( BOOL = TRUE ) const; const SvxPrintItem &GetPrint( BOOL = TRUE ) const; const SvxOpaqueItem &GetOpaque( BOOL = TRUE ) const; const SvxProtectItem &GetProtect( BOOL = TRUE ) const; const SwFmtVertOrient &GetVertOrient( BOOL = TRUE ) const; const SvxBoxItem &GetBox( BOOL = TRUE ) const; const SvxFmtKeepItem &GetKeep( BOOL = TRUE ) const; const SvxBrushItem &GetBackground( BOOL = TRUE ) const; const SvxShadowItem &GetShadow( BOOL = TRUE ) const; const SwFmtPageDesc &GetPageDesc( BOOL = TRUE ) const; const SvxFmtBreakItem &GetBreak( BOOL = TRUE ) const; const SvxMacroItem &GetMacro( BOOL = TRUE ) const; const SwFmtURL &GetURL( BOOL = TRUE ) const; #endif #if !( defined GCC && defined C272 && \ ( defined LINUX || defined SINIX || defined HPUX )) inline const SwFmtFillOrder &GetFillOrder( BOOL = TRUE ) const; inline const SwFmtFrmSize &GetFrmSize( BOOL = TRUE ) const; inline const SwFmtHeader &GetHeader( BOOL = TRUE ) const; inline const SwFmtFooter &GetFooter( BOOL = TRUE ) const; inline const SwFmtSurround &GetSurround( BOOL = TRUE ) const; inline const SwFmtHoriOrient &GetHoriOrient( BOOL = TRUE ) const; inline const SwFmtAnchor &GetAnchor( BOOL = TRUE ) const; inline const SwFmtCol &GetCol( BOOL = TRUE ) const; #endif #if !( defined GCC && defined C272 && defined HPUX ) inline const SvxPaperBinItem &GetPaperBin( BOOL = TRUE ) const; inline const SvxLRSpaceItem &GetLRSpace( BOOL = TRUE ) const; inline const SvxULSpaceItem &GetULSpace( BOOL = TRUE ) const; inline const SwFmtCntnt &GetCntnt( BOOL = TRUE ) const; inline const SvxPrintItem &GetPrint( BOOL = TRUE ) const; inline const SvxOpaqueItem &GetOpaque( BOOL = TRUE ) const; inline const SvxProtectItem &GetProtect( BOOL = TRUE ) const; inline const SwFmtVertOrient &GetVertOrient( BOOL = TRUE ) const; inline const SvxBoxItem &GetBox( BOOL = TRUE ) const; inline const SvxFmtKeepItem &GetKeep( BOOL = TRUE ) const; inline const SvxBrushItem &GetBackground( BOOL = TRUE ) const; inline const SvxShadowItem &GetShadow( BOOL = TRUE ) const; inline const SwFmtPageDesc &GetPageDesc( BOOL = TRUE ) const; inline const SvxFmtBreakItem &GetBreak( BOOL = TRUE ) const; inline const SvxMacroItem &GetMacro( BOOL = TRUE ) const; inline const SwFmtURL &GetURL( BOOL = TRUE ) const; inline const SwFmtEditInReadonly &GetEditInReadonly( BOOL = TRUE ) const; inline const SwFmtLayoutSplit &GetLayoutSplit( BOOL = TRUE ) const; inline const SwFmtChain &GetChain( BOOL = TRUE ) const; inline const SwFmtLineNumber &GetLineNumber( BOOL = TRUE ) const; inline const SwFmtFtnAtTxtEnd &GetFtnAtTxtEnd( BOOL = TRUE ) const; inline const SwFmtEndAtTxtEnd &GetEndAtTxtEnd( BOOL = TRUE ) const; inline const SwFmtNoBalancedColumns &GetBalancedColumns( BOOL = TRUE ) const; #endif // Grafik-Attribute - impl. steht im grfatr.hxx inline const SwMirrorGrf &GetMirrorGrf( BOOL = TRUE ) const; inline const SwCropGrf &GetCropGrf( BOOL = TRUE ) const; inline const SwRotationGrf &GetRotationGrf(BOOL = TRUE ) const; inline const SwLuminanceGrf &GetLuminanceGrf(BOOL = TRUE ) const; inline const SwContrastGrf &GetContrastGrf(BOOL = TRUE ) const; inline const SwChannelRGrf &GetChannelRGrf(BOOL = TRUE ) const; inline const SwChannelGGrf &GetChannelGGrf(BOOL = TRUE ) const; inline const SwChannelBGrf &GetChannelBGrf(BOOL = TRUE ) const; inline const SwGammaGrf &GetGammaGrf(BOOL = TRUE ) const; inline const SwInvertGrf &GetInvertGrf(BOOL = TRUE ) const; inline const SwTransparencyGrf &GetTransparencyGrf(BOOL = TRUE ) const; inline const SwDrawModeGrf &GetDrawModeGrf(BOOL = TRUE ) const; // Paragraph-Attribute - impl. steht im paratr.hxx inline const SvxLineSpacingItem &GetLineSpacing( BOOL = TRUE ) const; inline const SvxAdjustItem &GetAdjust( BOOL = TRUE ) const; inline const SvxFmtSplitItem &GetSplit( BOOL = TRUE ) const; inline const SwRegisterItem &GetRegister( BOOL = TRUE ) const; inline const SwNumRuleItem &GetNumRule( BOOL = TRUE ) const; inline const SvxWidowsItem &GetWidows( BOOL = TRUE ) const; inline const SvxOrphansItem &GetOrphans( BOOL = TRUE ) const; inline const SvxTabStopItem &GetTabStops( BOOL = TRUE ) const; inline const SvxHyphenZoneItem &GetHyphenZone( BOOL = TRUE ) const; inline const SwFmtDrop &GetDrop( BOOL = TRUE ) const; inline const SvxScriptSpaceItem &GetScriptSpace(BOOL = TRUE) const; inline const SvxHangingPunctuationItem &GetHangingPunctuation(BOOL = TRUE) const; inline const SvxForbiddenRuleItem &GetForbiddenRule(BOOL = TRUE) const; inline const SvxParaVertAlignItem &GetParaVertAlign(BOOL = TRUE) const; // TabellenBox-Attribute - impl. steht im cellatr.hxx inline const SwTblBoxNumFormat &GetTblBoxNumFmt( BOOL = TRUE ) const; inline const SwTblBoxFormula &GetTblBoxFormula( BOOL = TRUE ) const; inline const SwTblBoxValue &GetTblBoxValue( BOOL = TRUE ) const; }; // --------------- Inline Implementierungen ------------------------ inline const SfxPoolItem& SwFmt::GetAttr( USHORT nWhich, BOOL bInParents ) const { return aSet.Get( nWhich, bInParents ); } inline void SwFmt::SetName( const String& rNewName ) { ASSERT(!IsDefault(), "SetName: Defaultformat" ); aFmtName = rNewName; } inline void SwFmt::SetName( const sal_Char* pNewName ) { ASSERT(!IsDefault(), "SetName: Defaultformat" ); aFmtName.AssignAscii( pNewName ); } inline SfxItemState SwFmt::GetItemState( USHORT nWhich, BOOL bSrchInParent, const SfxPoolItem **ppItem ) const { return aSet.GetItemState( nWhich, bSrchInParent, ppItem ); } #endif // _FORMAT_HXX