/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #ifndef INCLUDED_SW_INC_UNODRAW_HXX #define INCLUDED_SW_INC_UNODRAW_HXX #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include class SdrMarkList; class SdrView; class SwDoc; class SwFmDrawPage : public SvxFmDrawPage { SdrPageView* pPageView; protected: // Create a SdrObject according to a description. Can be used by derived classes to // support own ::com::sun::star::drawing::Shapes (e.g. controls). virtual SdrObject *_CreateSdrObject( const ::com::sun::star::uno::Reference< ::com::sun::star::drawing::XShape > & xShape ) throw (std::exception); public: SwFmDrawPage( SdrPage* pPage ); virtual ~SwFmDrawPage() throw (); const SdrMarkList& PreGroup(const ::com::sun::star::uno::Reference< ::com::sun::star::drawing::XShapes > & xShapes); void PreUnGroup(const ::com::sun::star::uno::Reference< ::com::sun::star::drawing::XShapeGroup > xShapeGroup); SdrView* GetDrawView() {return mpView;} SdrPageView* GetPageView(); void RemovePageView(); ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface > GetInterface( SdrObject* pObj ); // The following method is called when a SvxShape-object is to be created. // Derived classes may obtain at this point a derivation or an object // that is aggregating a SvxShape. virtual ::com::sun::star::uno::Reference< ::com::sun::star::drawing::XShape > _CreateShape( SdrObject *pObj ) const throw (std::exception); }; typedef cppu::WeakAggImplHelper4 < ::com::sun::star::container::XEnumerationAccess, ::com::sun::star::drawing::XDrawPage, ::com::sun::star::lang::XServiceInfo, ::com::sun::star::drawing::XShapeGrouper > SwXDrawPageBaseClass; class SwXDrawPage : public SwXDrawPageBaseClass { SwDoc* pDoc; ::com::sun::star::uno::Reference< ::com::sun::star::uno::XAggregation > xPageAgg; SwFmDrawPage* pDrawPage; public: SwXDrawPage(SwDoc* pDoc); ~SwXDrawPage(); //XEnumerationAccess virtual ::com::sun::star::uno::Reference< ::com::sun::star::container::XEnumeration > SAL_CALL createEnumeration(void) throw( ::com::sun::star::uno::RuntimeException, std::exception ); virtual ::com::sun::star::uno::Any SAL_CALL queryInterface( const ::com::sun::star::uno::Type& aType ) throw(::com::sun::star::uno::RuntimeException, std::exception); virtual ::com::sun::star::uno::Sequence< ::com::sun::star::uno::Type > SAL_CALL getTypes( ) throw(::com::sun::star::uno::RuntimeException, std::exception); //XIndexAccess virtual sal_Int32 SAL_CALL getCount(void) throw( ::com::sun::star::uno::RuntimeException, std::exception ); virtual ::com::sun::star::uno::Any SAL_CALL getByIndex(sal_Int32 nIndex) throw( ::com::sun::star::lang::IndexOutOfBoundsException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException, std::exception ); //XElementAccess virtual ::com::sun::star::uno::Type SAL_CALL getElementType( ) throw(::com::sun::star::uno::RuntimeException, std::exception); virtual sal_Bool SAL_CALL hasElements( ) throw(::com::sun::star::uno::RuntimeException, std::exception); //XShapes virtual void SAL_CALL add(const ::com::sun::star::uno::Reference< ::com::sun::star::drawing::XShape > & xShape) throw( ::com::sun::star::uno::RuntimeException, std::exception ); virtual void SAL_CALL remove(const ::com::sun::star::uno::Reference< ::com::sun::star::drawing::XShape > & xShape) throw( ::com::sun::star::uno::RuntimeException, std::exception ); //XShapeGrouper virtual ::com::sun::star::uno::Reference< ::com::sun::star::drawing::XShapeGroup > SAL_CALL group(const ::com::sun::star::uno::Reference< ::com::sun::star::drawing::XShapes > & xShapes) throw (::com::sun::star::uno::RuntimeException, std::exception); virtual void SAL_CALL ungroup(const ::com::sun::star::uno::Reference< ::com::sun::star::drawing::XShapeGroup > & aGroup) throw( ::com::sun::star::uno::RuntimeException, std::exception ); //XServiceInfo virtual OUString SAL_CALL getImplementationName(void) throw( ::com::sun::star::uno::RuntimeException, std::exception ); virtual sal_Bool SAL_CALL supportsService(const OUString& ServiceName) throw( ::com::sun::star::uno::RuntimeException, std::exception ); virtual ::com::sun::star::uno::Sequence< OUString > SAL_CALL getSupportedServiceNames(void) throw( ::com::sun::star::uno::RuntimeException, std::exception ); SwFmDrawPage* GetSvxPage(); // renamed and outlined to detect where it's called void InvalidateSwDoc(); // {pDoc = 0;} }; class SwShapeDescriptor_Impl; class SwXGroupShape; typedef cppu::WeakAggImplHelper6 < ::com::sun::star::beans::XPropertySet, ::com::sun::star::beans::XPropertyState, ::com::sun::star::text::XTextContent, ::com::sun::star::lang::XServiceInfo, ::com::sun::star::lang::XUnoTunnel, ::com::sun::star::drawing::XShape > SwXShapeBaseClass; class SwXShape : public SwXShapeBaseClass, public SwClient { friend class SwXGroupShape; friend class SwXDrawPage; ::com::sun::star::uno::Reference< ::com::sun::star::uno::XAggregation > xShapeAgg; // reference to , determined in the // constructor by at . ::com::sun::star::uno::Reference< ::com::sun::star::drawing::XShape > mxShape; const SfxItemPropertySet* m_pPropSet; const SfxItemPropertyMapEntry* m_pPropertyMapEntries; SwShapeDescriptor_Impl* pImpl; sal_Bool m_bDescriptor; SvxShape* GetSvxShape(); /** method to determine top group object @author OD */ SdrObject* _GetTopGroupObj( SvxShape* _pSvxShape = 0L ); /** method to determine position according to the positioning attributes @author OD */ com::sun::star::awt::Point _GetAttrPosition(); /** method to convert the position (translation) of the drawing object to the layout direction horizontal left-to-right. @author OD */ ::com::sun::star::awt::Point _ConvertPositionToHoriL2R( const ::com::sun::star::awt::Point _aObjPos, const ::com::sun::star::awt::Size _aObjSize ); /** method to convert the transformation of the drawing object to the layout direction, the drawing object is in @author OD */ ::com::sun::star::drawing::HomogenMatrix3 _ConvertTransformationToLayoutDir( ::com::sun::star::drawing::HomogenMatrix3 _aMatrixInHoriL2R ); /** method to adjust the positioning properties @author OD @param _aPosition input parameter - point representing the new shape position. The position has to be given in the layout direction the shape is in and relative to its position alignment areas. */ void _AdjustPositionProperties( const ::com::sun::star::awt::Point _aPosition ); /** method to convert start or end position of the drawing object to the Writer specific position, which is the attribute position in layout direction @author OD */ ::com::sun::star::awt::Point _ConvertStartOrEndPosToLayoutDir( const ::com::sun::star::awt::Point& aStartOrEndPos ); /** method to convert PolyPolygonBezier of the drawing object to the Writer specific position, which is the attribute position in layout direction @author OD */ ::com::sun::star::drawing::PolyPolygonBezierCoords _ConvertPolyPolygonBezierToLayoutDir( const ::com::sun::star::drawing::PolyPolygonBezierCoords& aPath ); /** method to get property from aggregation object @author OD */ ::com::sun::star::uno::Any _getPropAtAggrObj( const OUString& _rPropertyName ) throw( ::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException); protected: virtual ~SwXShape(); //SwClient virtual void Modify( const SfxPoolItem* pOld, const SfxPoolItem *pNew); public: SwXShape(::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface > & xShape); TYPEINFO(); static const ::com::sun::star::uno::Sequence< sal_Int8 > & getUnoTunnelId(); virtual ::com::sun::star::uno::Any SAL_CALL queryInterface( const ::com::sun::star::uno::Type& aType ) throw(::com::sun::star::uno::RuntimeException, std::exception); virtual ::com::sun::star::uno::Sequence< ::com::sun::star::uno::Type > SAL_CALL getTypes( ) throw(::com::sun::star::uno::RuntimeException, std::exception); virtual ::com::sun::star::uno::Sequence< sal_Int8 > SAL_CALL getImplementationId( ) throw(::com::sun::star::uno::RuntimeException, std::exception); //XUnoTunnel virtual sal_Int64 SAL_CALL getSomething( const ::com::sun::star::uno::Sequence< sal_Int8 >& aIdentifier ) throw(::com::sun::star::uno::RuntimeException, std::exception); //XPropertySet virtual ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertySetInfo > SAL_CALL getPropertySetInfo( ) throw(::com::sun::star::uno::RuntimeException, std::exception); virtual void SAL_CALL setPropertyValue( const OUString& aPropertyName, const ::com::sun::star::uno::Any& aValue ) throw(::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::beans::PropertyVetoException, ::com::sun::star::lang::IllegalArgumentException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException, std::exception); virtual ::com::sun::star::uno::Any SAL_CALL getPropertyValue( const OUString& PropertyName ) throw(::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException, std::exception); virtual void SAL_CALL addPropertyChangeListener( const OUString& aPropertyName, const ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertyChangeListener >& xListener ) throw(::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException, std::exception); virtual void SAL_CALL removePropertyChangeListener( const OUString& aPropertyName, const ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertyChangeListener >& aListener ) throw(::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException, std::exception); virtual void SAL_CALL addVetoableChangeListener( const OUString& PropertyName, const ::com::sun::star::uno::Reference< ::com::sun::star::beans::XVetoableChangeListener >& aListener ) throw(::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException, std::exception); virtual void SAL_CALL removeVetoableChangeListener( const OUString& PropertyName, const ::com::sun::star::uno::Reference< ::com::sun::star::beans::XVetoableChangeListener >& aListener ) throw(::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException, std::exception); //XPropertyState virtual ::com::sun::star::beans::PropertyState SAL_CALL getPropertyState( const OUString& PropertyName ) throw(::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::uno::RuntimeException, std::exception); virtual ::com::sun::star::uno::Sequence< ::com::sun::star::beans::PropertyState > SAL_CALL getPropertyStates( const ::com::sun::star::uno::Sequence< OUString >& aPropertyName ) throw(::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::uno::RuntimeException, std::exception); virtual void SAL_CALL setPropertyToDefault( const OUString& PropertyName ) throw(::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::uno::RuntimeException, std::exception); virtual ::com::sun::star::uno::Any SAL_CALL getPropertyDefault( const OUString& aPropertyName ) throw(::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException, std::exception); //XTextContent virtual void SAL_CALL attach(const ::com::sun::star::uno::Reference< ::com::sun::star::text::XTextRange > & xTextRange) throw( ::com::sun::star::lang::IllegalArgumentException, ::com::sun::star::uno::RuntimeException, std::exception ); virtual ::com::sun::star::uno::Reference< ::com::sun::star::text::XTextRange > SAL_CALL getAnchor(void) throw( ::com::sun::star::uno::RuntimeException, std::exception ); //XComponent virtual void SAL_CALL dispose(void) throw( ::com::sun::star::uno::RuntimeException, std::exception ); virtual void SAL_CALL addEventListener(const ::com::sun::star::uno::Reference< ::com::sun::star::lang::XEventListener > & aListener) throw( ::com::sun::star::uno::RuntimeException, std::exception ); virtual void SAL_CALL removeEventListener(const ::com::sun::star::uno::Reference< ::com::sun::star::lang::XEventListener > & aListener) throw( ::com::sun::star::uno::RuntimeException, std::exception ); //XServiceInfo virtual OUString SAL_CALL getImplementationName(void) throw( ::com::sun::star::uno::RuntimeException, std::exception ); virtual sal_Bool SAL_CALL supportsService(const OUString& ServiceName) throw( ::com::sun::star::uno::RuntimeException, std::exception ); virtual ::com::sun::star::uno::Sequence< OUString > SAL_CALL getSupportedServiceNames(void) throw( ::com::sun::star::uno::RuntimeException, std::exception ); virtual ::com::sun::star::awt::Point SAL_CALL getPosition( ) throw (::com::sun::star::uno::RuntimeException, std::exception); virtual void SAL_CALL setPosition( const ::com::sun::star::awt::Point& aPosition ) throw (::com::sun::star::uno::RuntimeException, std::exception); virtual ::com::sun::star::awt::Size SAL_CALL getSize( ) throw (::com::sun::star::uno::RuntimeException, std::exception); virtual void SAL_CALL setSize( const ::com::sun::star::awt::Size& aSize ) throw (::com::sun::star::beans::PropertyVetoException, ::com::sun::star::uno::RuntimeException, std::exception); virtual OUString SAL_CALL getShapeType( ) throw (::com::sun::star::uno::RuntimeException, std::exception); SwShapeDescriptor_Impl* GetDescImpl() {return pImpl;} SwFrmFmt* GetFrmFmt() const { return (SwFrmFmt*)GetRegisteredIn(); } ::com::sun::star::uno::Reference< ::com::sun::star::uno::XAggregation > GetAggregationInterface() {return xShapeAgg;} // helper static void AddExistingShapeToFmt( SdrObject& _rObj ); }; class SwXGroupShape : public SwXShape, public ::com::sun::star::drawing::XShapes { protected: virtual ~SwXGroupShape(); public: SwXGroupShape(::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface > & xShape); virtual ::com::sun::star::uno::Any SAL_CALL queryInterface( const ::com::sun::star::uno::Type& aType ) throw(::com::sun::star::uno::RuntimeException, std::exception); virtual void SAL_CALL acquire( ) throw(); virtual void SAL_CALL release( ) throw(); //XShapes virtual void SAL_CALL add( const ::com::sun::star::uno::Reference< ::com::sun::star::drawing::XShape >& xShape ) throw (::com::sun::star::uno::RuntimeException, std::exception); virtual void SAL_CALL remove( const ::com::sun::star::uno::Reference< ::com::sun::star::drawing::XShape >& xShape ) throw (::com::sun::star::uno::RuntimeException, std::exception); //XIndexAccess virtual sal_Int32 SAL_CALL getCount(void) throw( ::com::sun::star::uno::RuntimeException, std::exception ); virtual ::com::sun::star::uno::Any SAL_CALL getByIndex(sal_Int32 nIndex) throw( ::com::sun::star::lang::IndexOutOfBoundsException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException, std::exception ); //XElementAccess virtual ::com::sun::star::uno::Type SAL_CALL getElementType( ) throw(::com::sun::star::uno::RuntimeException, std::exception); virtual sal_Bool SAL_CALL hasElements( ) throw(::com::sun::star::uno::RuntimeException, std::exception); }; #endif /* vim:set shiftwidth=4 softtabstop=4 expandtab: */ '>feature/glyphy LibreOffice 核心代码仓库文档基金会
summaryrefslogtreecommitdiff
path: root/lo.xcent.in
AgeCommit message (Collapse)Author
2023-06-07Set entitlements in non-release in $(INSTROOTBASE) and .dmg packagePatrick Luby
Also, when building a .dmg for macOS, skip codesigning for non-release builds, both with and without the macOS sandbox, if there is no identity set but set entitlements to allow Xcode's Instruments application to connect to the application. Lastly, add entitlements when building soffice in $(INSTROOTBASE) if this is a non-release build. Change-Id: I764bf5bd5d44e878669c4287906e6efd6aac593f Reviewed-on: https://gerrit.libreoffice.org/c/core/+/152655 Tested-by: Jenkins Reviewed-by: Patrick Luby <plubius@neooffice.org>