/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include "mmaddressblockpage.hxx"
#include <mailmergewizard.hxx>
#include <swtypes.hxx>
#include "addresslistdialog.hxx"
#include <editeng/eeitem.hxx>
#include <o3tl/safeint.hxx>
#include <svl/grabbagitem.hxx>
#include <svl/itemset.hxx>
#include <utility>
#include <vcl/commandevent.hxx>
#include <vcl/event.hxx>
#include <vcl/svapp.hxx>
#include <vcl/weld.hxx>
#include <vcl/transfer.hxx>
#include <mmconfigitem.hxx>
#include <com/sun/star/container/XNameAccess.hpp>
#include <com/sun/star/datatransfer/dnd/XDropTarget.hpp>
#include <com/sun/star/sdbc/SQLException.hpp>
#include <com/sun/star/sdbcx/XColumnsSupplier.hpp>
#include <com/sun/star/sdb/XColumn.hpp>
#include <comphelper/sequence.hxx>
#include <comphelper/string.hxx>
#include <comphelper/diagnose_ex.hxx>

#include <vector>
#include <strings.hrc>
#include <mmaddressblockpage.hrc>
#include <helpids.h>

using namespace ::com::sun::star;
using namespace ::com::sun::star::container;
using namespace ::com::sun::star::sdb;
using namespace ::com::sun::star::sdbc;
using namespace ::com::sun::star::sdbcx;

SwMailMergeAddressBlockPage::SwMailMergeAddressBlockPage(weld::Container* pPage, SwMailMergeWizard* pWizard)
    : vcl::OWizardPage(pPage, pWizard, "modules/swriter/ui/mmaddressblockpage.ui", "MMAddressBlockPage")
    , m_pWizard(pWizard)
    , m_xAddressListPB(m_xBuilder->weld_button("addresslist"))
    , m_xCurrentAddressFI(m_xBuilder->weld_label("currentaddress"))
    , m_xStep2(m_xBuilder->weld_container("step2"))
    , m_xStep3(m_xBuilder->weld_container("step3"))
    , m_xStep4(m_xBuilder->weld_container("step4"))
    , m_xSettingsFI(m_xBuilder->weld_label("settingsft"))
    , m_xAddressCB(m_xBuilder->weld_check_button("address"))
    , m_xSettingsPB(m_xBuilder->weld_button("settings"))
    , m_xHideEmptyParagraphsCB(m_xBuilder->weld_check_button("hideempty"))
    , m_xAssignPB(m_xBuilder->weld_button("assign"))
    , m_xDocumentIndexFI(m_xBuilder->weld_label("documentindex"))
    , m_xPrevSetIB(m_xBuilder->weld_button("prev"))
    , m_xNextSetIB(m_xBuilder->weld_button("next"))
    , m_xDifferentlist(m_xBuilder->weld_button("differentlist"))
    , m_xSettings(new SwAddressPreview(m_xBuilder->weld_scrolled_window("settingspreviewwin", true)))
    , m_xPreview(new SwAddressPreview(m_xBuilder->weld_scrolled_window("addresspreviewwin", true)))
    , m_xSettingsWIN(new weld::CustomWeld(*m_xBuilder, "settingspreview", *m_xSettings))
    , m_xPreviewWIN(new weld::CustomWeld(*m_xBuilder, "addresspreview", *m_xPreview))
{
    m_xSettingsWIN->set_size_request(m_xDifferentlist->get_approximate_digit_width() * 40,
                                     m_xDifferentlist->get_text_height() * 6);
    m_xPreviewWIN->set_size_request(m_xDifferentlist->get_approximate_digit_width() * 44,
                                    m_xDifferentlist->get_text_height() * 6);
    m_sChangeAddress = m_xDifferentlist->get_label();
    m_sDocument = m_xDocumentIndexFI->get_label();

    m_sCurrentAddress = m_xCurrentAddressFI->get_label();
    m_xAddressListPB->connect_clicked(LINK(this, SwMailMergeAddressBlockPage, AddressListHdl_Impl));
    m_xSettingsPB->connect_clicked(LINK(this, SwMailMergeAddressBlockPage, SettingsHdl_Impl));
    m_xAssignPB->connect_clicked(LINK(this, SwMailMergeAddressBlockPage, AssignHdl_Impl ));
    m_xAddressCB->connect_toggled(LINK(this, SwMailMergeAddressBlockPage, AddressBlockHdl_Impl));
    m_xSettings->SetSelectHdl(LINK(this, SwMailMergeAddressBlockPage, AddressBlockSelectHdl_Impl));
    m_xHideEmptyParagraphsCB->connect_toggled(LINK(this, SwMailMergeAddressBlockPage, HideParagraphsHdl_Impl));

    Link<weld::Button&,void> aLink = LINK(this, SwMailMergeAddressBlockPage, InsertDataHdl_Impl);
    m_xPrevSetIB->connect_clicked(aLink);
    m_xNextSetIB->connect_clicked(aLink);

    // lock in preferred size including current address line
    Size aSize1(m_xContainer->get_preferred_size());

    OUString sOrigLabel = m_xAddressListPB->get_label();
    m_xAddressListPB->set_label(m_sChangeAddress);
    Size aSize2(m_xContainer->get_preferred_size());
    m_xAddressListPB->set_label(sOrigLabel);

    m_xCurrentAddressFI->hide();

    m_xContainer->set_size_request(std::max(aSize1.Width(), aSize2.Width()),
                                   std::max(aSize1.Height(), aSize2.Height()));
}

SwMailMergeAddressBlockPage::~SwMailMergeAddressBlockPage()
{
    m_xPreviewWIN.reset();
    m_xSettingsWIN.reset();
    m_xPreview.reset();
    m_xSettings.reset();
}

bool SwMailMergeAddressBlockPage::canAdvance() const
{
    return m_pWizard->GetConfigItem().GetResultSet().is();
}

void SwMailMergeAddressBlockPage::Activate()
{
    SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem();
    bool bIsLetter = rConfigItem.IsOutputToLetter();

    //no address block is created for e-Mail
    m_xStep2->set_visible(bIsLetter);
    m_xStep3->set_visible(bIsLetter);
    m_xStep4->set_visible(bIsLetter);

    if (!bIsLetter)
        return;

    m_xHideEmptyParagraphsCB->set_active( rConfigItem.IsHideEmptyParagraphs() );
    m_xDocumentIndexFI->set_label(m_sDocument.replaceFirst("%1", "1"));

    m_xSettings->Clear();
    const uno::Sequence< OUString> aBlocks =
                m_pWizard->GetConfigItem().GetAddressBlocks();
    for(const auto& rAddress : aBlocks)
        m_xSettings->AddAddress(rAddress);
    m_xSettings->SelectAddress(o3tl::narrowing<sal_uInt16>(rConfigItem.GetCurrentAddressBlockIndex()));
    m_xAddressCB->set_active(rConfigItem.IsAddressBlock());
    AddressBlockHdl_Impl(*m_xAddressCB);
    m_xSettings->SetLayout(1, 2);
    InsertDataHdl(nullptr);
}

bool SwMailMergeAddressBlockPage::commitPage( ::vcl::WizardTypes::CommitPageReason _eReason )
{
    return ::vcl::WizardTypes::eTravelForward != _eReason || m_pWizard->GetConfigItem().GetResultSet().is();
}

IMPL_LINK_NOARG(SwMailMergeAddressBlockPage, AddressListHdl_Impl, weld::Button&, void)
{
    try
    {
        SwAddressListDialog aAddrDialog(this);
        if (RET_OK == aAddrDialog.run())
        {
            SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem();
            rConfigItem.SetCurrentConnection(
                            aAddrDialog.GetSource(),
                            aAddrDialog.GetConnection(),
                            aAddrDialog.GetColumnsSupplier(),
                            aAddrDialog.GetDBData());
            OUString sFilter = aAddrDialog.GetFilter();
            rConfigItem.SetFilter( sFilter );
            InsertDataHdl(nullptr);
            GetWizard()->UpdateRoadmap();
            GetWizard()->enableButtons(WizardButtonFlags::NEXT, GetWizard()->isStateEnabled(MM_GREETINGSPAGE));
        }
    }
    catch (const uno::Exception& e)
    {
        TOOLS_WARN_EXCEPTION("sw", "");
        std::unique_ptr<weld::MessageDialog> xBox(Application::CreateMessageDialog(m_pWizard->getDialog(),
                                                  VclMessageType::Warning, VclButtonsType::Ok, e.Message));
        xBox->run();
    }
}

IMPL_LINK_NOARG(SwMailMergeAddressBlockPage, SettingsHdl_Impl, weld::Button&, void)
{
    SwSelectAddressBlockDialog aDlg(m_pWizard->getDialog(), m_pWizard->GetConfigItem());
    SwMailMergeConfigItem& rConfig = m_pWizard->GetConfigItem();
    aDlg.SetAddressBlocks(rConfig.GetAddressBlocks(), m_xSettings->GetSelectedAddress());
    aDlg.SetSettings(rConfig.IsIncludeCountry(), rConfig.GetExcludeCountry());
    if (aDlg.run() == RET_OK)
    {
        //the dialog provides the selected address at the first position!
        const uno::Sequence< OUString> aBlocks = aDlg.GetAddressBlocks();
        rConfig.SetAddressBlocks(aBlocks);
        m_xSettings->Clear();
        for(const auto& rAddress : aBlocks)
            m_xSettings->AddAddress(rAddress);
        m_xSettings->SelectAddress(0);
        m_xSettings->Invalidate();    // #i40408
        rConfig.SetCountrySettings(aDlg.IsIncludeCountry(), aDlg.GetCountry());
        InsertDataHdl(nullptr);
    }
    GetWizard()->UpdateRoadmap();
    GetWizard()->enableButtons(WizardButtonFlags::NEXT, GetWizard()->isStateEnabled(MM_GREETINGSPAGE));
}

IMPL_LINK_NOARG(SwMailMergeAddressBlockPage, AssignHdl_Impl, weld::Button&, void)
{
    SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem();
    const sal_uInt16 nSel = m_xSettings->GetSelectedAddress();
    const uno::Sequence< OUString> aBlocks = rConfigItem.GetAddressBlocks();
    SwAssignFieldsDialog aDlg(m_pWizard->getDialog(), m_pWizard->GetConfigItem(), aBlocks[nSel], true);
    if(RET_OK == aDlg.run())
    {
        //preview update
        InsertDataHdl(nullptr);
        GetWizard()->UpdateRoadmap();
        GetWizard()->enableButtons(WizardButtonFlags::NEXT, GetWizard()->isStateEnabled(MM_GREETINGSPAGE));
    }
}

void SwMailMergeAddressBlockPage::EnableAddressBlock(bool bAll, bool bSelective)
{
    m_xSettingsFI->set_sensitive(bAll);
    m_xAddressCB->set_sensitive(bAll);
    bSelective &= bAll;
    m_xHideEmptyParagraphsCB->set_sensitive(bSelective);
    m_xSettingsWIN->set_sensitive(bSelective);
    m_xSettingsPB->set_sensitive(bSelective);
    m_xStep3->set_sensitive(bSelective);
    m_xStep4->set_sensitive(bSelective);
}

IMPL_LINK(SwMailMergeAddressBlockPage, AddressBlockHdl_Impl, weld::Toggleable&, rBox, void)
{
    EnableAddressBlock(rBox.get_sensitive(), rBox.get_active());
    SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem();
    rConfigItem.SetAddressBlock(m_xAddressCB->get_active());
    m_pWizard->UpdateRoadmap();
    GetWizard()->enableButtons(WizardButtonFlags::NEXT, GetWizard()->isStateEnabled(MM_GREETINGSPAGE));
}

IMPL_LINK_NOARG(SwMailMergeAddressBlockPage, AddressBlockSelectHdl_Impl, LinkParamNone*, void)
{
    const sal_uInt16 nSel = m_xSettings->GetSelectedAddress();
    const uno::Sequence< OUString> aBlocks =
                m_pWizard->GetConfigItem().GetAddressBlocks();
    m_xPreview->SetAddress(SwAddressPreview::FillData(aBlocks[nSel],
                                                         m_pWizard->GetConfigItem()));
    m_pWizard->GetConfigItem().SetCurrentAddressBlockIndex( nSel );
    GetWizard()->UpdateRoadmap();
    GetWizard()->enableButtons(WizardButtonFlags::NEXT, GetWizard()->isStateEnabled(MM_GREETINGSPAGE));
}

IMPL_LINK(SwMailMergeAddressBlockPage, HideParagraphsHdl_Impl, weld::Toggleable&, rBox, void)
{
    SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem();
    rConfigItem.SetHideEmptyParagraphs(rBox.get_active());
}

void SwMailMergeAddressBlockPage::InsertDataHdl(const weld::Button* pButton)
{
    //if no pButton is given, the first set has to be pre-set
    SwMailMergeConfigItem& rConfig = m_pWizard->GetConfigItem();
    std::unique_ptr<weld::WaitObject> xWaitObj(new weld::WaitObject(m_pWizard->getDialog()));
    if(!pButton)
    {
        rConfig.GetResultSet();
    }
    else
    {
        bool bNext = pButton == m_xNextSetIB.get();
        sal_Int32 nPos = rConfig.GetResultSetPosition();
        rConfig.MoveResultSet( bNext ? ++nPos : --nPos);
    }
    xWaitObj.reset();
    sal_Int32 nPos = rConfig.GetResultSetPosition();
    bool bEnable = true;
    if(nPos < 1)
    {
        bEnable = false;
        nPos = 1;
    }
    else
    {
        //if output type is letter
        if (m_xSettings->IsVisible())
        {
            //Fill data into preview
            const sal_uInt16 nSel = m_xSettings->GetSelectedAddress();
            const uno::Sequence< OUString> aBlocks =
                        m_pWizard->GetConfigItem().GetAddressBlocks();
            m_xPreview->SetAddress(SwAddressPreview::FillData(aBlocks[nSel], rConfig));
        }
    }
    m_xPrevSetIB->set_sensitive(bEnable);
    m_xDocumentIndexFI->set_label(m_sDocument.replaceFirst("%1", OUString::number(nPos)));

    GetWizard()->enableButtons(WizardButtonFlags::NEXT, GetWizard()->isStateEnabled(MM_GREETINGSPAGE));
    bool bHasResultSet = rConfig.GetResultSet().is();
    m_xCurrentAddressFI->set_visible(bHasResultSet);
    if(bHasResultSet)
    {
        m_xCurrentAddressFI->set_label(m_sCurrentAddress.replaceFirst("%1", rConfig.GetCurrentDBData().sDataSource));
        m_xAddressListPB->set_label(m_sChangeAddress);
    }
    EnableAddressBlock(bHasResultSet, m_xAddressCB->get_active());
}

IMPL_LINK(SwMailMergeAddressBlockPage, InsertDataHdl_Impl, weld::Button&, rButton, void)
{
    InsertDataHdl(&rButton);
}

SwSelectAddressBlockDialog::SwSelectAddressBlockDialog(weld::Window* pParent, SwMailMergeConfigItem& rConfig)
    : SfxDialogController(pParent, "modules/swriter/ui/selectblockdialog.ui", "SelectBlockDialog")
    , m_rConfig(rConfig)
    , m_xPreview(new SwAddressPreview(m_xBuilder->weld_scrolled_window("previewwin", true)))
    , m_xNewPB(m_xBuilder->weld_button("new"))
    , m_xCustomizePB(m_xBuilder->weld_button("edit"))
    , m_xDeletePB(m_xBuilder->weld_button("delete"))
    , m_xNeverRB(m_xBuilder->weld_radio_button("never"))
    , m_xAlwaysRB(m_xBuilder->weld_radio_button("always"))
    , m_xDependentRB(m_xBuilder->weld_radio_button("dependent"))
    , m_xCountryED(m_xBuilder->weld_entry("country"))
    , m_xPreviewWin(new weld::CustomWeld(*m_xBuilder, "preview", *m_xPreview))
{
    m_xPreviewWin->set_size_request(m_xCountryED->get_approximate_digit_width() * 45,
                                    m_xCountryED->get_text_height() * 12);

    Link<weld::Button&,void> aCustomizeHdl = LINK(this, SwSelectAddressBlockDialog, NewCustomizeHdl_Impl);
    m_xNewPB->connect_clicked(aCustomizeHdl);
    m_xCustomizePB->connect_clicked(aCustomizeHdl);

    m_xDeletePB->connect_clicked(LINK(this, SwSelectAddressBlockDialog, DeleteHdl_Impl));

    Link<weld::Toggleable&,void> aLk = LINK(this, SwSelectAddressBlockDialog, IncludeHdl_Impl);
    m_xNeverRB->connect_toggled(aLk);
    m_xAlwaysRB->connect_toggled(aLk);
    m_xDependentRB->connect_toggled(aLk);
    m_xPreview->SetLayout(2, 2);
    m_xPreview->EnableScrollBar();
}

SwSelectAddressBlockDialog::~SwSelectAddressBlockDialog()
{
}

void SwSelectAddressBlockDialog::SetAddressBlocks(const uno::Sequence< OUString>& rBlocks,
        sal_uInt16 nSelectedAddress)
{
    m_aAddressBlocks = rBlocks;
    for (const auto& rAddressBlock : std::as_const(m_aAddressBlocks))
        m_xPreview->AddAddress(rAddressBlock);
    m_xPreview->SelectAddress(nSelectedAddress);
}

// return the address blocks and put the selected one to the first position
const uno::Sequence< OUString >&    SwSelectAddressBlockDialog::GetAddressBlocks()
{
    //put the selected block to the first position
    const sal_Int32 nSelect = static_cast<sal_Int32>(m_xPreview->GetSelectedAddress());
    if(nSelect)
    {
        uno::Sequence< OUString >aTemp(m_aAddressBlocks.getLength());
        auto it = aTemp.getArray();
        *it = std::as_const(m_aAddressBlocks)[nSelect];
        it = std::copy_n(std::cbegin(m_aAddressBlocks), nSelect - 1, std::next(it));
        std::copy(std::next(std::cbegin(m_aAddressBlocks), nSelect + 1), std::cend(m_aAddressBlocks), it);
        m_aAddressBlocks = aTemp;
    }
    return m_aAddressBlocks;
}

void SwSelectAddressBlockDialog::SetSettings(
        bool bIsCountry, const OUString& rCountry)
{
    weld::RadioButton *pActive = m_xNeverRB.get();
    if(bIsCountry)
    {
        pActive = !rCountry.isEmpty() ? m_xDependentRB.get() : m_xAlwaysRB.get();
        m_xCountryED->set_text(rCountry);
    }
    pActive->set_active(true);
    IncludeHdl_Impl(*pActive);
    m_xDeletePB->set_sensitive(m_aAddressBlocks.getLength() > 1);
}

OUString SwSelectAddressBlockDialog::GetCountry() const
{
    if (m_xDependentRB->get_active())
        return m_xCountryED->get_text();
    return OUString();
}

IMPL_LINK(SwSelectAddressBlockDialog, DeleteHdl_Impl, weld::Button&, rButton, void)
{
    if (m_aAddressBlocks.getLength())
    {
        const sal_Int32 nSelected = static_cast<sal_Int32>(m_xPreview->GetSelectedAddress());
        comphelper::removeElementAt(m_aAddressBlocks, nSelected);
        if (m_aAddressBlocks.getLength() <= 1)
            rButton.set_sensitive(false);
        m_xPreview->RemoveSelectedAddress();
    }
}

IMPL_LINK(SwSelectAddressBlockDialog, NewCustomizeHdl_Impl, weld::Button&, rButton, void)
{
    bool bCustomize = &rButton == m_xCustomizePB.get();
    SwCustomizeAddressBlockDialog::DialogType nType = bCustomize ?
        SwCustomizeAddressBlockDialog::ADDRESSBLOCK_EDIT :
        SwCustomizeAddressBlockDialog::ADDRESSBLOCK_NEW;
    std::unique_ptr<SwCustomizeAddressBlockDialog> xDlg(new SwCustomizeAddressBlockDialog(&rButton,
            m_rConfig, nType));
    if(bCustomize)
    {
        xDlg->SetAddress(m_aAddressBlocks[m_xPreview->GetSelectedAddress()]);
    }
    if (RET_OK != xDlg->run())
        return;

    const OUString sNew = xDlg->GetAddress();
    if(bCustomize)
    {
        m_xPreview->ReplaceSelectedAddress(sNew);
        m_aAddressBlocks.getArray()[m_xPreview->GetSelectedAddress()] = sNew;
    }
    else
    {
        m_xPreview->AddAddress(sNew);
        m_aAddressBlocks.realloc(m_aAddressBlocks.getLength() + 1);
        const sal_Int32 nSelect = m_aAddressBlocks.getLength() - 1;
        m_aAddressBlocks.getArray()[nSelect] = sNew;
        m_xPreview->SelectAddress(o3tl::narrowing<sal_uInt16>(nSelect));
    }
    m_xDeletePB->set_sensitive(m_aAddressBlocks.getLength() > 1);
}

IMPL_LINK_NOARG(SwSelectAddressBlockDialog, IncludeHdl_Impl, weld::Toggleable&,  void)
{
    m_xCountryED->set_sensitive(m_xDependentRB->get_active());
}

#define USER_DATA_SALUTATION        -1
#define USER_DATA_PUNCTUATION       -2
#define USER_DATA_TEXT              -3
#define USER_DATA_NONE              -4

IMPL_LINK(SwCustomizeAddressBlockDialog, TextFilterHdl, OUString&, rTest, bool)
{
    rTest = m_aTextFilter.filter(rTest);
    return true;
}

SwCustomizeAddressBlockDialog::SwCustomizeAddressBlockDialog(
        weld::Widget* pParent, SwMailMergeConfigItem& rConfig, DialogType eType)
    : SfxDialogController(pParent, "modules/swriter/ui/addressblockdialog.ui",
                          "AddressBlockDialog")
    , m_aTextFilter("<>")
    , m_rConfigItem(rConfig)
    , m_eType(eType)
    , m_aSelectionChangedIdle("SwCustomizeAddressBlockDialog m_aSelectionChangedIdle")
    , m_xAddressElementsFT(m_xBuilder->weld_label("addressesft"))
    , m_xAddressElementsLB(m_xBuilder->weld_tree_view("addresses"))
    , m_xInsertFieldIB(m_xBuilder->weld_button("toaddr"))
    , m_xRemoveFieldIB(m_xBuilder->weld_button("fromaddr"))
    , m_xDragFT(m_xBuilder->weld_label("addressdestft"))
    , m_xUpIB(m_xBuilder->weld_button("up"))
    , m_xLeftIB(m_xBuilder->weld_button("left"))
    , m_xRightIB(m_xBuilder->weld_button("right"))
    , m_xDownIB(m_xBuilder->weld_button("down"))
    , m_xFieldFT(m_xBuilder->weld_label("customft"))
    , m_xFieldCB(m_xBuilder->weld_combo_box("custom"))
    , m_xOK(m_xBuilder->weld_button("ok"))
    , m_xPreview(new SwAddressPreview(m_xBuilder->weld_scrolled_window("previewwin", true)))
    , m_xPreviewWIN(new weld::CustomWeld(*m_xBuilder, "addrpreview", *m_xPreview))
    , m_xDragED(new AddressMultiLineEdit(this))
    , m_xDragWIN(new weld::CustomWeld(*m_xBuilder, "addressdest", *m_xDragED))
{
    m_aSelectionChangedIdle.SetInvokeHandler( LINK( this, SwCustomizeAddressBlockDialog, SelectionChangedIdleHdl ) );

    Size aSize(m_xDragED->GetDrawingArea()->get_size_request());
    m_xPreview->set_size_request(aSize.Width(), aSize.Height());

    m_xFieldCB->connect_entry_insert_text(LINK(this, SwCustomizeAddressBlockDialog, TextFilterHdl));
    m_xAddressElementsLB->set_size_request(-1, m_xAddressElementsLB->get_height_rows(16));

    if( eType >= GREETING_FEMALE )
    {
        m_xFieldFT->show();
        m_xFieldCB->show();
        m_xAddressElementsLB->append(OUString::number(USER_DATA_SALUTATION), SwResId(ST_SALUTATION));
        m_xAddressElementsLB->append(OUString::number(USER_DATA_PUNCTUATION), SwResId(ST_PUNCTUATION));
        m_xAddressElementsLB->append(OUString::number(USER_DATA_TEXT), SwResId(ST_TEXT));
        for (size_t i = 0; i < SAL_N_ELEMENTS(RA_SALUTATION); ++i)
            m_aSalutations.push_back(SwResId(RA_SALUTATION[i]));
        for (size_t i = 0; i < SAL_N_ELEMENTS(RA_PUNCTUATION); ++i)
            m_aPunctuations.push_back(SwResId(RA_PUNCTUATION[i]));
        m_xDragED->SetText("            ");
        m_xDialog->set_title(SwResId(eType == GREETING_MALE ? ST_TITLE_MALE : ST_TITLE_FEMALE));
        m_xAddressElementsFT->set_label(SwResId(ST_SALUTATIONELEMENTS));
        m_xInsertFieldIB->set_tooltip_text(SwResId(ST_INSERTSALUTATIONFIELD));
        m_xRemoveFieldIB->set_tooltip_text(SwResId(ST_REMOVESALUTATIONFIELD));
        m_xDragFT->set_label(SwResId(ST_DRAGSALUTATION));
    }
    else
    {
        if (eType == ADDRESSBLOCK_EDIT)
            m_xDialog->set_title(SwResId(ST_TITLE_EDIT));
        m_xDragED->SetText("\n\n\n\n\n");
        /* Set custom HIDs for swriter/01/mm_newaddblo.xhp */
        m_xAddressElementsLB->set_help_id( HID_MM_ADDBLOCK_ELEMENTS );
        m_xInsertFieldIB->set_help_id( HID_MM_ADDBLOCK_INSERT );
        m_xRemoveFieldIB->set_help_id( HID_MM_ADDBLOCK_REMOVE );
        m_xDragWIN->set_help_id( HID_MM_ADDBLOCK_DRAG );
        m_xPreviewWIN->set_help_id( HID_MM_ADDBLOCK_PREVIEW );
        m_xRightIB->set_help_id( HID_MM_ADDBLOCK_MOVEBUTTONS );
        m_xLeftIB->set_help_id( HID_MM_ADDBLOCK_MOVEBUTTONS );
        m_xDownIB->set_help_id( HID_MM_ADDBLOCK_MOVEBUTTONS );
        m_xUpIB->set_help_id( HID_MM_ADDBLOCK_MOVEBUTTONS );
    }

    const std::vector<std::pair<OUString, int>>& rHeaders = m_rConfigItem.GetDefaultAddressHeaders();
    for (size_t i = 0; i < rHeaders.size(); ++i)
        m_xAddressElementsLB->append(OUString::number(i), rHeaders[i].first);
    m_xOK->connect_clicked(LINK(this, SwCustomizeAddressBlockDialog, OKHdl_Impl));
    m_xAddressElementsLB->connect_changed(LINK(this, SwCustomizeAddressBlockDialog, ListBoxSelectHdl_Impl));
    if (m_xAddressElementsLB->n_children())
        m_xAddressElementsLB->select(0);
    m_xDragED->SetModifyHdl(LINK(this, SwCustomizeAddressBlockDialog, EditModifyHdl_Impl));
    m_xDragED->SetSelectionChangedHdl( LINK( this, SwCustomizeAddressBlockDialog, SelectionChangedHdl_Impl));
    m_xFieldCB->connect_changed(LINK(this, SwCustomizeAddressBlockDialog, FieldChangeComboBoxHdl_Impl));
    Link<weld::Button&,void> aImgButtonHdl = LINK(this, SwCustomizeAddressBlockDialog, ImageButtonHdl_Impl);
    m_xInsertFieldIB->connect_clicked(aImgButtonHdl);
    m_xRemoveFieldIB->connect_clicked(aImgButtonHdl);
    m_xUpIB->connect_clicked(aImgButtonHdl);
    m_xLeftIB->connect_clicked(aImgButtonHdl);
    m_xRightIB->connect_clicked(aImgButtonHdl);
    m_xDownIB->connect_clicked(aImgButtonHdl);
    UpdateImageButtons_Impl();
}

bool SwCustomizeAddressBlockDialog::SetCursorLogicPosition(const Point& rPosition)
{
    return m_xDragED->SetCursorLogicPosition(rPosition);
}

void SwCustomizeAddressBlockDialog::UpdateFields()
{
    m_xDragED->UpdateFields();
}

SwCustomizeAddressBlockDialog::~SwCustomizeAddressBlockDialog()
{
    m_xDragED->EndDropTarget();
}

IMPL_LINK_NOARG(SwCustomizeAddressBlockDialog, OKHdl_Impl, weld::Button&, void)
{
    m_xDialog->response(RET_OK);
}

IMPL_LINK(SwCustomizeAddressBlockDialog, ListBoxSelectHdl_Impl, weld::TreeView&, rBox, void)
{
    sal_Int32 nUserData = rBox.get_selected_id().toInt32();
    // Check if the selected entry is already in the address and then forbid inserting
    m_xInsertFieldIB->set_sensitive(nUserData >= 0 || !HasItem(nUserData));
}

IMPL_LINK_NOARG(SwCustomizeAddressBlockDialog, EditModifyHdl_Impl, AddressMultiLineEdit&, void)
{
    m_xPreview->SetAddress(SwAddressPreview::FillData(GetAddress(), m_rConfigItem));
    UpdateImageButtons_Impl();
}

IMPL_LINK(SwCustomizeAddressBlockDialog, ImageButtonHdl_Impl, weld::Button&, rButton, void)
{
    if (m_xInsertFieldIB.get() == &rButton)
    {
        int nEntry = m_xAddressElementsLB->get_selected_index();
        if (nEntry != -1)
        {
            m_xDragED->InsertNewEntry("<" + m_xAddressElementsLB->get_text(nEntry) + ">");
        }
    }
    else if (m_xRemoveFieldIB.get() == &rButton)
    {
        m_xDragED->RemoveCurrentEntry();
    }
    else
    {
        MoveItemFlags nMove = MoveItemFlags::Down;
        if (m_xUpIB.get() == &rButton)
            nMove = MoveItemFlags::Up;
        else if (m_xLeftIB.get() == &rButton)
            nMove = MoveItemFlags::Left;
        else if (m_xRightIB.get() == &rButton)
            nMove = MoveItemFlags::Right;
        m_xDragED->MoveCurrentItem(nMove);
    }
    UpdateImageButtons_Impl();
}

sal_Int32 SwCustomizeAddressBlockDialog::GetSelectedItem_Impl() const
{
    sal_Int32 nRet = USER_DATA_NONE;
    const OUString sSelected = m_xDragED->GetCurrentItem();
    if(!sSelected.isEmpty())
    {
        for (int i = 0, nEntryCount = m_xAddressElementsLB->n_children(); i < nEntryCount; ++i)
        {
            const OUString sEntry = m_xAddressElementsLB->get_text(i);
            if( sEntry == sSelected.subView( 1, sSelected.getLength() - 2 ) )
            {
                nRet = m_xAddressElementsLB->get_id(i).toInt32();
                break;
            }
        }
    }
    return nRet;
}

bool SwCustomizeAddressBlockDialog::HasItem(sal_Int32 nUserData)
{
    //get the entry from the ListBox
    OUString sEntry;
    for (int i = 0, nEntryCount = m_xAddressElementsLB->n_children(); i < nEntryCount; ++i)
    {
        if (m_xAddressElementsLB->get_id(i).toInt32() == nUserData)
        {
            sEntry = m_xAddressElementsLB->get_text(i);
            break;
        }
    }
    //search for this entry in the content
    return m_xDragED->GetText().indexOf(Concat2View("<" + sEntry + ">")) >= 0;
}

IMPL_LINK_NOARG(SwCustomizeAddressBlockDialog, SelectionChangedIdleHdl, Timer*, void)
{
    // called in case the selection of the edit field changes.
    // determine selection - if it's one of the editable fields then
    // enable the related ComboBox and fill it

    // don't trigger outself again
    m_xDragED->SetSelectionChangedHdl(Link<bool, void>());

    sal_Int32 nSelected = GetSelectedItem_Impl();
    if (USER_DATA_NONE != nSelected)
        m_xDragED->SelectCurrentItem();

    if(m_xFieldCB->get_visible() && (USER_DATA_NONE != nSelected) && (nSelected < 0))
    {
        //search in ListBox if it's one of the first entries
        OUString sSelect;
        std::vector<OUString>* pVector = nullptr;
        switch(nSelected) {
            case USER_DATA_SALUTATION:
                sSelect =  m_sCurrentSalutation;
                pVector = &m_aSalutations;
                break;
            case USER_DATA_PUNCTUATION:
                sSelect =  m_sCurrentPunctuation;
                pVector = &m_aPunctuations;
                break;
            case USER_DATA_TEXT:
                sSelect =  m_sCurrentText;
                break;
        }
        m_xFieldCB->clear();
        if(pVector) {
            for (const auto& rItem : *pVector)
                m_xFieldCB->append_text(rItem);
        }
        m_xFieldCB->set_entry_text(sSelect);
        m_xFieldCB->set_sensitive(true);
        m_xFieldFT->set_sensitive(true);
    }
    else
    {
        m_xFieldCB->set_sensitive(false);
        m_xFieldFT->set_sensitive(false);
    }

    UpdateImageButtons_Impl();
    m_xDragED->SetSelectionChangedHdl( LINK( this, SwCustomizeAddressBlockDialog, SelectionChangedHdl_Impl));
}

IMPL_LINK(SwCustomizeAddressBlockDialog, SelectionChangedHdl_Impl, bool, bIdle, void)
{
    if (bIdle)
        m_aSelectionChangedIdle.Start();
    else
    {
        m_aSelectionChangedIdle.Stop();
        SelectionChangedIdleHdl(nullptr);
    }
}

IMPL_LINK_NOARG(SwCustomizeAddressBlockDialog, FieldChangeComboBoxHdl_Impl, weld::ComboBox&, void)
{
    //changing the field content changes the related members, too
    sal_Int32 nSelected = GetSelectedItem_Impl();
    const OUString sContent = m_xFieldCB->get_active_text();
    switch(nSelected) {
        case USER_DATA_SALUTATION:
            m_sCurrentSalutation = sContent;
            break;
        case USER_DATA_PUNCTUATION:
            m_sCurrentPunctuation = sContent;
            break;
        case USER_DATA_TEXT:
            m_sCurrentText = sContent;
            break;
    }
    UpdateImageButtons_Impl();
    m_xPreview->SetAddress(GetAddress());
    EditModifyHdl_Impl(*m_xDragED);
}

void SwCustomizeAddressBlockDialog::UpdateImageButtons_Impl()
{
    MoveItemFlags nMove = m_xDragED->IsCurrentItemMoveable();
    m_xUpIB->set_sensitive( bool(nMove & MoveItemFlags::Up) );
    m_xLeftIB->set_sensitive( bool(nMove & MoveItemFlags::Left) );
    m_xRightIB->set_sensitive( bool(nMove & MoveItemFlags::Right) );
    m_xDownIB->set_sensitive( bool(nMove & MoveItemFlags::Down) );
    m_xRemoveFieldIB->set_sensitive(m_xDragED->HasCurrentItem());
    int nEntry = m_xAddressElementsLB->get_selected_index();
    m_xInsertFieldIB->set_sensitive( nEntry != -1 &&
            (m_xAddressElementsLB->get_id(nEntry).toInt32() >= 0 || !m_xFieldCB->get_active_text().isEmpty()));
}

void SwCustomizeAddressBlockDialog::SetAddress(const OUString& rAddress)
{
    m_xDragED->SetText(rAddress);
    UpdateImageButtons_Impl();
    EditModifyHdl_Impl(*m_xDragED);
}

OUString SwCustomizeAddressBlockDialog::GetAddress() const
{
    OUString sAddress(m_xDragED->GetAddress());
    //remove placeholders by the actual content
    if (m_xFieldFT->get_visible())
    {
        for (int i = 0, nEntryCount = m_xAddressElementsLB->n_children(); i < nEntryCount; ++i)
        {
            const OUString sEntry = "<" + m_xAddressElementsLB->get_text(i) + ">";
            sal_Int32 nUserData = m_xAddressElementsLB->get_id(i).toInt32();
            switch(nUserData)
            {
                case USER_DATA_SALUTATION:
                    sAddress = sAddress.replaceFirst(sEntry, m_sCurrentSalutation);
                    break;
                case USER_DATA_PUNCTUATION:
                    sAddress = sAddress.replaceFirst(sEntry, m_sCurrentPunctuation);
                    break;
                case USER_DATA_TEXT:
                    sAddress = sAddress.replaceFirst(sEntry, m_sCurrentText);
                    break;
            }
        }
    }
    return sAddress;
}

namespace {

struct SwAssignFragment
{
    std::unique_ptr<weld::Builder> m_xBuilder;
    std::unique_ptr<weld::Label> m_xLabel;
    std::unique_ptr<weld::ComboBox> m_xComboBox;
    std::unique_ptr<weld::Label> m_xPreview;

    SwAssignFragment(weld::Container* pGrid, int nLine)
        : m_xBuilder(Application::CreateBuilder(pGrid, "modules/swriter/ui/assignfragment.ui"))
        , m_xLabel(m_xBuilder->weld_label("label"))
        , m_xComboBox(m_xBuilder->weld_combo_box("combobox"))
        , m_xPreview(m_xBuilder->weld_label("preview"))
    {
        m_xLabel->set_grid_left_attach(0);
        m_xLabel->set_grid_top_attach(nLine);

        m_xComboBox->set_grid_left_attach(1);
        m_xComboBox->set_grid_top_attach(nLine);

        m_xPreview->set_grid_left_attach(2);
        m_xPreview->set_grid_top_attach(nLine);
    }
};

}

class SwAssignFieldsControl
{
    friend class SwAssignFieldsDialog;
    std::unique_ptr<weld::ScrolledWindow> m_xVScroll;
    std::unique_ptr<weld::Container> m_xGrid;

    std::vector<SwAssignFragment> m_aFields;

    SwMailMergeConfigItem* m_rConfigItem;

    Link<LinkParamNone*,void>   m_aModifyHdl;

    DECL_LINK(MatchHdl_Impl, weld::ComboBox&, void);
    DECL_LINK(GotFocusHdl_Impl, weld::Widget&, void);

    void MakeVisible(const tools::Rectangle & rRect);
public:
    SwAssignFieldsControl(std::unique_ptr<weld::ScrolledWindow> xWindow,
                          std::unique_ptr<weld::Container> xGrid);

    void Init(SwAssignFieldsDialog* pDialog, SwMailMergeConfigItem& rConfigItem);
    void SetModifyHdl(const Link<LinkParamNone*,void>& rModifyHdl)
    {
        m_aModifyHdl = rModifyHdl;
        m_aModifyHdl.Call(nullptr);
    }
};

SwAssignFieldsControl::SwAssignFieldsControl(std::unique_ptr<weld::ScrolledWindow> xWindow,
                                             std::unique_ptr<weld::Container> xGrid)
    : m_xVScroll(std::move(xWindow))
    , m_xGrid(std::move(xGrid))
    , m_rConfigItem(nullptr)
{
}

void SwAssignFieldsControl::Init(SwAssignFieldsDialog* pDialog, SwMailMergeConfigItem& rConfigItem)
{
    m_rConfigItem = &rConfigItem;

    //get the name of the default headers
    const std::vector<std::pair<OUString, int>>& rHeaders = rConfigItem.GetDefaultAddressHeaders();
    //get the actual data
    uno::Reference< XColumnsSupplier > xColsSupp( rConfigItem.GetResultSet(), uno::UNO_QUERY);
    //get the name of the actual columns
    uno::Reference <XNameAccess> xColAccess = xColsSupp.is() ? xColsSupp->getColumns() : nullptr;
    uno::Sequence< OUString > aFields;
    if(xColAccess.is())
        aFields = xColAccess->getElementNames();

    //get the current assignment list
    //each position in this sequence matches the position in the header array rHeaders
    //if no assignment is available an empty sequence will be returned
    uno::Sequence< OUString> aAssignments = rConfigItem.GetColumnAssignment( rConfigItem.GetCurrentDBData() );
    Link<weld::ComboBox&,void> aMatchHdl = LINK(this, SwAssignFieldsControl, MatchHdl_Impl);
    Link<weld::Widget&,void> aFocusHdl = LINK(this, SwAssignFieldsControl, GotFocusHdl_Impl);

    int nLabelWidth(0), nComboBoxWidth(0), nPreviewWidth(0);

    //fill the controls
    for (size_t i = 0; i < rHeaders.size(); ++i)
    {
        m_aFields.emplace_back(m_xGrid.get(), i);

        const OUString rHeader = rHeaders[i].first;
        weld::ComboBox& rNewLB = *m_aFields.back().m_xComboBox;
        rNewLB.append_text(SwResId(SW_STR_NONE));
        rNewLB.set_active(0);

        for (const OUString& rField : std::as_const(aFields))
            rNewLB.append_text(rField);
        //select the ListBox
        //if there is an assignment
        if(o3tl::make_unsigned(aAssignments.getLength()) > i && !aAssignments[i].isEmpty())
            rNewLB.set_active_text(aAssignments[i]);
        else //otherwise the current column name may match one of the db columns
            rNewLB.set_active_text(rHeader);

        weld::Label& rNewText = *m_aFields.back().m_xLabel;
        rNewText.set_label("<" + rHeader + ">");

        weld::Label& rNewPreview = *m_aFields.back().m_xPreview;
        //then the preview can be filled accordingly
        if (xColAccess.is() && rNewLB.get_active() > 0 &&
            xColAccess->hasByName(rNewLB.get_active_text()))
        {
            uno::Any aCol = xColAccess->getByName(rNewLB.get_active_text());
            uno::Reference< XColumn > xColumn;
            aCol >>= xColumn;
            if(xColumn.is())
            {
                try
                {
                    rNewPreview.set_label(xColumn->getString());
                }
                catch (const SQLException&)
                {
                }
            }
        }

        if (i == 0)
        {
            auto nLineHeight = m_xGrid->get_preferred_size().Height();
            m_xVScroll->set_size_request(m_xVScroll->get_approximate_digit_width() * 65,
                                         nLineHeight * 6);
            nComboBoxWidth = rNewLB.get_preferred_size().Width();
        }

        nLabelWidth = std::max<int>(nLabelWidth, rNewText.get_preferred_size().Width());
        nPreviewWidth = std::max<int>(nPreviewWidth, rNewPreview.get_preferred_size().Width());

        rNewLB.connect_changed(aMatchHdl);
        rNewLB.connect_focus_in(aFocusHdl);
        rNewText.show();
        rNewLB.show();
        rNewPreview.show();
    }
    pDialog->ConnectSizeGroups(nLabelWidth, nComboBoxWidth, nPreviewWidth);
}

void SwAssignFieldsControl::MakeVisible(const tools::Rectangle & rRect)
{
    //determine range of visible positions
    auto nMinVisiblePos = m_xVScroll->vadjustment_get_value();
    auto nMaxVisiblePos = nMinVisiblePos + m_xVScroll->vadjustment_get_page_size();
    if (rRect.Top() < nMinVisiblePos || rRect.Bottom() > nMaxVisiblePos)
        m_xVScroll->vadjustment_set_value(rRect.Top());
}

IMPL_LINK(SwAssignFieldsControl, MatchHdl_Impl, weld::ComboBox&, rBox, void)
{
    const OUString sColumn = rBox.get_active_text();
    uno::Reference< XColumnsSupplier > xColsSupp( m_rConfigItem->GetResultSet(), uno::UNO_QUERY);
    uno::Reference <XNameAccess> xColAccess = xColsSupp.is() ? xColsSupp->getColumns() : nullptr;
    OUString sPreview;
    if(xColAccess.is() && xColAccess->hasByName(sColumn))
    {
        uno::Any aCol = xColAccess->getByName(sColumn);
        uno::Reference< XColumn > xColumn;
        aCol >>= xColumn;
        if(xColumn.is())
        {
            try
            {
                sPreview = xColumn->getString();
            }
            catch (const sdbc::SQLException&)
            {
            }
        }
    }
    auto aLBIter = std::find_if(m_aFields.begin(), m_aFields.end(), [&rBox](const SwAssignFragment& rFragment){
                                                                     return &rBox == rFragment.m_xComboBox.get(); });
    if (aLBIter != m_aFields.end())
    {
        auto nIndex = static_cast<sal_Int32>(std::distance(m_aFields.begin(), aLBIter));
        m_aFields[nIndex].m_xPreview->set_label(sPreview);
    }
    m_aModifyHdl.Call(nullptr);
}

IMPL_LINK(SwAssignFieldsControl, GotFocusHdl_Impl, weld::Widget&, rBox, void)
{
    int x, y, width, height;
    rBox.get_extents_relative_to(*m_xGrid, x, y, width, height);
    // the container has a border of 3 in the .ui
    tools::Rectangle aRect(Point(x - 3, y - 3), Size(width + 6, height + 6));
    MakeVisible(aRect);
}

SwAssignFieldsDialog::SwAssignFieldsDialog(
        weld::Window* pParent, SwMailMergeConfigItem& rConfigItem,
        OUString aPreview,
        bool bIsAddressBlock)
    : SfxDialogController(pParent, "modules/swriter/ui/assignfieldsdialog.ui", "AssignFieldsDialog")
    , m_sNone(SwResId(SW_STR_NONE))
    , m_rPreviewString(std::move(aPreview))
    , m_rConfigItem(rConfigItem)
    , m_xPreview(new SwAddressPreview(m_xBuilder->weld_scrolled_window("previewwin", true)))
    , m_xMatchingFI(m_xBuilder->weld_label("MATCHING_LABEL"))
    , m_xAddressTitle(m_xBuilder->weld_label("addresselem"))
    , m_xMatchTitle(m_xBuilder->weld_label("matchelem"))
    , m_xPreviewTitle(m_xBuilder->weld_label("previewelem"))
    , m_xPreviewFI(m_xBuilder->weld_label("PREVIEW_LABEL"))
    , m_xOK(m_xBuilder->weld_button("ok"))
    , m_xPreviewWin(new weld::CustomWeld(*m_xBuilder, "PREVIEW", *m_xPreview))
    , m_xFieldsControl(new SwAssignFieldsControl(m_xBuilder->weld_scrolled_window("scroll"),
                                                 m_xBuilder->weld_container("FIELDS")))
{
    m_xPreviewWin->set_size_request(m_xMatchingFI->get_approximate_digit_width() * 45,
                                    m_xMatchingFI->get_text_height() * 5);
    m_xFieldsControl->Init(this, rConfigItem);

    const OUString sMatchesTo( SwResId(ST_MATCHESTO) );
    if (!bIsAddressBlock)
    {
        m_xPreviewFI->set_label(SwResId(ST_SALUTATIONPREVIEW));
        m_xMatchingFI->set_label(SwResId(ST_SALUTATIONMATCHING));
        m_xAddressTitle->set_label(SwResId(ST_SALUTATIONELEMENT));
    }

    m_xFieldsControl->SetModifyHdl(LINK(this, SwAssignFieldsDialog, AssignmentModifyHdl_Impl ));
    m_xMatchingFI->set_label(m_xMatchingFI->get_label().replaceAll("%1", sMatchesTo));
    m_xOK->connect_clicked(LINK(this, SwAssignFieldsDialog, OkHdl_Impl));
}

SwAssignFieldsDialog::~SwAssignFieldsDialog()
{
}

uno::Sequence< OUString > SwAssignFieldsDialog::CreateAssignments()
{
    uno::Sequence< OUString > aAssignments(
            m_rConfigItem.GetDefaultAddressHeaders().size());
    OUString* pAssignments = aAssignments.getArray();
    sal_Int32 nIndex = 0;
    for (const auto& rLBItem : m_xFieldsControl->m_aFields)
    {
        const OUString sSelect = rLBItem.m_xComboBox->get_active_text();
        pAssignments[nIndex] = (m_sNone != sSelect) ? sSelect : OUString();
        ++nIndex;
    }
    return aAssignments;
}

IMPL_LINK_NOARG(SwAssignFieldsDialog, OkHdl_Impl, weld::Button&, void)
{
    m_rConfigItem.SetColumnAssignment(
                            m_rConfigItem.GetCurrentDBData(),
                            CreateAssignments() );
    m_xDialog->response(RET_OK);
}

IMPL_LINK_NOARG(SwAssignFieldsDialog, AssignmentModifyHdl_Impl, LinkParamNone*, void)
{
    uno::Sequence< OUString > aAssignments = CreateAssignments();
    const OUString sPreview = SwAddressPreview::FillData(
            m_rPreviewString, m_rConfigItem, &aAssignments);
    m_xPreview->SetAddress(sPreview);
}

void SwAssignFieldsDialog::ConnectSizeGroups(int nLabelWidth, int nComboBoxWidth, int nPreviewWidth)
{
    m_xAddressTitle->set_size_request(nLabelWidth, -1);
    m_xMatchTitle->set_size_request(nComboBoxWidth, -1);
    m_xPreviewTitle->set_size_request(nPreviewWidth, -1);
}

namespace
{
    const EECharAttrib* FindCharAttrib(int nStartPosition, std::vector<EECharAttrib>& rAttribList)
    {
        for (auto it = rAttribList.rbegin(); it != rAttribList.rend(); ++it)
        {
            const auto& rTextAtr = *it;
            if (rTextAtr.pAttr->Which() != EE_CHAR_GRABBAG)
                continue;
            if (rTextAtr.nStart <= nStartPosition && rTextAtr.nEnd >= nStartPosition)
            {
                return &rTextAtr;
            }
        }

        return nullptr;
    }
}

AddressMultiLineEdit::AddressMultiLineEdit(SwCustomizeAddressBlockDialog *pParent)
    : m_pParentDialog(pParent)
{
}

void AddressMultiLineEdit::EndDropTarget()
{
    if (m_xDropTarget.is())
    {
        m_xEditEngine->RemoveView(m_xEditView.get());
        auto xRealDropTarget = GetDrawingArea()->get_drop_target();
        uno::Reference<css::datatransfer::dnd::XDropTargetListener> xListener(m_xDropTarget, uno::UNO_QUERY);
        xRealDropTarget->removeDropTargetListener(xListener);
        m_xDropTarget.clear();
    }
}

AddressMultiLineEdit::~AddressMultiLineEdit()
{
    assert(!m_xDropTarget.is());
}

void AddressMultiLineEdit::SetDrawingArea(weld::DrawingArea* pDrawingArea)
{
    Size aSize(pDrawingArea->get_ref_device().LogicToPixel(Size(160, 60), MapMode(MapUnit::MapAppFont)));
    pDrawingArea->set_size_request(aSize.Width(), aSize.Height());
    WeldEditView::SetDrawingArea(pDrawingArea);
}

bool AddressMultiLineEdit::KeyInput(const KeyEvent& rKEvt)
{
    if (rKEvt.GetKeyCode().GetCode() == KEY_ESCAPE)
        return false; // we want default esc behaviour
    if (rKEvt.GetCharCode())
        return true; // handled
    return WeldEditView::KeyInput(rKEvt);
}

bool AddressMultiLineEdit::Command(const CommandEvent& rCEvt)
{
    if (rCEvt.GetCommand() == CommandEventId::StartExtTextInput ||
        rCEvt.GetCommand() == CommandEventId::EndExtTextInput ||
        rCEvt.GetCommand() == CommandEventId::ExtTextInput)
    {
        return true;
    }
    return WeldEditView::Command(rCEvt);
}

bool AddressMultiLineEdit::MouseButtonDown(const MouseEvent& rMEvt)
{
    if (rMEvt.GetClicks() >= 2)
        return true; // handled
    return WeldEditView::MouseButtonDown(rMEvt);
}

OUString AddressMultiLineEdit::GetText() const
{
    return m_xEditEngine->GetText();
}

void AddressMultiLineEdit::SetText( const OUString& rStr )
{
    m_xEditEngine->SetText(rStr);
    //set attributes to all address tokens

    sal_Int32 nSequence(0);
    SfxGrabBagItem aProtectAttr(EE_CHAR_GRABBAG);
    const sal_uInt32 nParaCount = m_xEditEngine->GetParagraphCount();
    for(sal_uInt32 nPara = 0; nPara < nParaCount; ++nPara)
    {
        sal_Int32 nIndex = 0;
        const OUString sPara = m_xEditEngine->GetText( nPara );
        if (!sPara.isEmpty() && !sPara.endsWith(" "))
        {
            ESelection aPaM(nPara, sPara.getLength(), nPara, sPara.getLength());
            m_xEditEngine->QuickInsertText(" ", aPaM);
        }
        for(;;)
        {
            const sal_Int32 nStart = sPara.indexOf( '<', nIndex );
            if (nStart < 0)
                break;
            const sal_Int32 nEnd = sPara.indexOf( '>', nStart );
            if (nEnd < 0)
                break;
            nIndex = nEnd;
            SfxItemSet aSet(m_xEditEngine->GetEmptyItemSet());
            // make each one different, so they are not collapsed together
            // as one attribute
            aProtectAttr.GetGrabBag()["Index"] <<= nSequence++;
            aSet.Put(aProtectAttr);
            m_xEditEngine->QuickSetAttribs(aSet, ESelection(nPara, nStart, nPara, nEnd + 1));
        }

    }
    // add two empty paragraphs at the end
    if(m_pParentDialog->m_eType == SwCustomizeAddressBlockDialog::ADDRESSBLOCK_NEW ||
            m_pParentDialog->m_eType == SwCustomizeAddressBlockDialog::ADDRESSBLOCK_EDIT)
    {
        sal_Int32 nLastLen = m_xEditEngine->GetText(nParaCount - 1).getLength();
        if(nLastLen)
        {
            int nPara = nParaCount ? nParaCount - 1 : 0;
            ESelection aPaM(nPara, nLastLen, nPara, nLastLen);
            m_xEditEngine->QuickInsertText("\n \n ", aPaM);
        }
    }

    m_xEditView->SetSelection(ESelection(0, 0, 0, 0));
}

// Insert the new entry in front of the entry at the beginning of the selection
void AddressMultiLineEdit::InsertNewEntry( const OUString& rStr )
{
    // insert new entry after current selected one.
    ESelection aSelection = m_xEditView->GetSelection();
    const sal_uInt32 nPara = aSelection.nStartPara;

    std::vector<EECharAttrib> aAttribList;
    m_xEditEngine->GetCharAttribs(nPara, aAttribList);

    sal_Int32 nIndex = aSelection.nEndPara;
    const EECharAttrib* pAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList);
    if(nullptr != pAttrib)
        nIndex = pAttrib->nEnd;
    InsertNewEntryAtPosition( rStr, nPara, nIndex );

    // select the new entry
    m_xEditEngine->GetCharAttribs(nPara, aAttribList);
    pAttrib = FindCharAttrib(nIndex, aAttribList);
    const sal_Int32 nEnd = pAttrib ? pAttrib->nEnd : nIndex;
    ESelection aEntrySel(nPara, nIndex, nPara, nEnd);
    m_xEditView->SetSelection(aEntrySel);
    Invalidate();
    m_aModifyLink.Call(*this);
}

void AddressMultiLineEdit::InsertNewEntryAtPosition( const OUString& rStr, sal_uLong nPara, sal_uInt16 nIndex )
{
    ESelection aInsertPos(nPara, nIndex, nPara, nIndex);
    m_xEditEngine->QuickInsertText(rStr, aInsertPos);

    //restore the attributes
    SetText( GetAddress() );

    //select the newly inserted/moved element
    m_xEditView->SetSelection(aInsertPos);
    m_aSelectionLink.Call(false);
}

void AddressMultiLineEdit::RemoveCurrentEntry()
{
    ESelection aSelection = m_xEditView->GetSelection();

    std::vector<EECharAttrib> aAttribList;
    m_xEditEngine->GetCharAttribs(aSelection.nStartPara, aAttribList);

    const EECharAttrib* pBeginAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList);
    if(pBeginAttrib &&
            (pBeginAttrib->nStart <= aSelection.nStartPos
                            && pBeginAttrib->nEnd >= aSelection.nEndPos))
    {
        const sal_uInt32 nPara = aSelection.nStartPara;
        ESelection aEntrySel(nPara, pBeginAttrib->nStart, nPara, pBeginAttrib->nEnd);
        m_xEditEngine->QuickInsertText(OUString(), aEntrySel);
        //restore the attributes
        SetText( GetAddress() );
        m_aModifyLink.Call(*this);
    }
}

void AddressMultiLineEdit::MoveCurrentItem(MoveItemFlags nMove)
{
    ESelection aSelection = m_xEditView->GetSelection();

    std::vector<EECharAttrib> aAttribList;
    m_xEditEngine->GetCharAttribs(aSelection.nStartPara, aAttribList);

    const EECharAttrib* pBeginAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList);
    if(!pBeginAttrib ||
         pBeginAttrib->nStart > aSelection.nStartPos ||
         pBeginAttrib->nEnd < aSelection.nEndPos)
        return;

    //current item has been found
    sal_Int32 nPara = aSelection.nStartPara;
    sal_Int32 nIndex = pBeginAttrib->nStart;
    ESelection aEntrySel(nPara, pBeginAttrib->nStart, nPara, pBeginAttrib->nEnd);
    const OUString sCurrentItem = m_xEditEngine->GetText(aEntrySel);
    m_xEditEngine->RemoveAttribs(aEntrySel, false, EE_CHAR_GRABBAG);
    m_xEditEngine->QuickInsertText(OUString(), aEntrySel);
    m_xEditEngine->GetCharAttribs(nPara, aAttribList);
    switch (nMove)
    {
        case MoveItemFlags::Left :
            if(nIndex)
            {
                //go left to find a predecessor or simple text
                --nIndex;
                const OUString sPara = m_xEditEngine->GetText( nPara );
                sal_Int32 nSearchIndex = sPara.lastIndexOf( '>', nIndex+1 );
                if( nSearchIndex != -1 && nSearchIndex == nIndex )
                {
                    nSearchIndex = sPara.lastIndexOf( '<', nIndex );
                    if( nSearchIndex != -1 )
                        nIndex = nSearchIndex;
                }
            }
        break;
        case MoveItemFlags::Right:
        {
            //go right to find a successor or simple text
            ++nIndex;
            const EECharAttrib* pEndAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList);
            if(pEndAttrib && pEndAttrib->nEnd >= nIndex)
            {
                nIndex = pEndAttrib->nEnd;
            }
        }
        break;
        case MoveItemFlags::Up   :
            --nPara;
            nIndex = 0;
        break;
        case MoveItemFlags::Down :
            ++nPara;
            nIndex = 0;
        break;
        default: break;
    }
    //add a new paragraph if there is none yet
    if (nPara >= m_xEditEngine->GetParagraphCount())
    {
        auto nInsPara = nPara - 1;
        auto nInsPos = m_xEditEngine->GetTextLen( nPara - 1 );
        ESelection aTemp(nInsPara, nInsPos, nInsPara, nInsPos);
        m_xEditEngine->QuickInsertText("\n", aTemp);
    }
    InsertNewEntryAtPosition( sCurrentItem, nPara, nIndex );

    // select the new entry [#i40817]
    m_xEditEngine->GetCharAttribs(nPara, aAttribList);
    const EECharAttrib* pAttrib = FindCharAttrib(nIndex, aAttribList);
    if (pAttrib)
        aEntrySel = ESelection(nPara, nIndex, nPara, pAttrib->nEnd);
    m_xEditView->SetSelection(aEntrySel);
    Invalidate();
    m_aModifyLink.Call(*this);
}

MoveItemFlags AddressMultiLineEdit::IsCurrentItemMoveable() const
{
    MoveItemFlags nRet = MoveItemFlags::NONE;
    ESelection aSelection = m_xEditView->GetSelection();

    std::vector<EECharAttrib> aAttribList;
    m_xEditEngine->GetCharAttribs(aSelection.nStartPara, aAttribList);

    const EECharAttrib* pBeginAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList);
    if (pBeginAttrib &&
            (pBeginAttrib->nStart <= aSelection.nStartPos
                            && pBeginAttrib->nEnd >= aSelection.nEndPos))
    {
        if (pBeginAttrib->nStart)
            nRet |= MoveItemFlags::Left;
        //if there is an entry it can always be move to the right and down
        nRet |= MoveItemFlags::Right | MoveItemFlags::Down;
        if (aSelection.nStartPara > 0)
            nRet |= MoveItemFlags::Up;
    }
    return nRet;
}

bool AddressMultiLineEdit::HasCurrentItem() const
{
    ESelection aSelection = m_xEditView->GetSelection();

    std::vector<EECharAttrib> aAttribList;
    m_xEditEngine->GetCharAttribs(aSelection.nStartPara, aAttribList);

    const EECharAttrib* pBeginAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList);
    return (pBeginAttrib &&
            (pBeginAttrib->nStart <= aSelection.nStartPos
                            && pBeginAttrib->nEnd >= aSelection.nEndPos));
}

OUString AddressMultiLineEdit::GetCurrentItem() const
{
    ESelection aSelection = m_xEditView->GetSelection();

    std::vector<EECharAttrib> aAttribList;
    m_xEditEngine->GetCharAttribs(aSelection.nStartPara, aAttribList);

    const EECharAttrib* pBeginAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList);
    if (pBeginAttrib &&
            (pBeginAttrib->nStart <= aSelection.nStartPos
                            && pBeginAttrib->nEnd >= aSelection.nEndPos))
    {
        const sal_uInt32 nPara = aSelection.nStartPara;
        ESelection aEntrySel(nPara, pBeginAttrib->nStart, nPara, pBeginAttrib->nEnd);
        return m_xEditEngine->GetText( aEntrySel );
    }
    return OUString();
}

void AddressMultiLineEdit::SelectCurrentItem()
{
    ESelection aSelection = m_xEditView->GetSelection();

    std::vector<EECharAttrib> aAttribList;
    m_xEditEngine->GetCharAttribs(aSelection.nStartPara, aAttribList);

    const EECharAttrib* pBeginAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList);
    if (pBeginAttrib &&
            (pBeginAttrib->nStart <= aSelection.nStartPos
                            && pBeginAttrib->nEnd >= aSelection.nEndPos))
    {
        const sal_uInt32 nPara = aSelection.nStartPara;
        ESelection aEntrySel(nPara, pBeginAttrib->nStart, nPara, pBeginAttrib->nEnd);
        m_xEditView->SetSelection(aEntrySel);
        Invalidate();
    }
}

OUString AddressMultiLineEdit::GetAddress() const
{
    OUString sRet;
    const sal_uInt32 nParaCount = m_xEditEngine->GetParagraphCount();
    for(sal_uInt32 nPara = nParaCount; nPara; --nPara)
    {
        const OUString sPara = comphelper::string::stripEnd(m_xEditEngine->GetText(nPara - 1), ' ');
        //don't add empty trailing paragraphs
        if(!sRet.isEmpty() || !sPara.isEmpty())
        {
            sRet = sPara + sRet;
            //insert the para break
            if(nPara > 1)
                sRet = "\n" + sRet;
        }
    }
    return sRet;
}

void AddressMultiLineEdit::UpdateFields()
{
    ESelection aSelection = m_xEditView->GetSelection();

    //restore the attributes
    SetText( GetAddress() );

    //reselect the element
    m_xEditView->SetSelection(aSelection);
    m_aSelectionLink.Call(false);
}

void AddressMultiLineEdit::EditViewSelectionChange()
{
    WeldEditView::EditViewSelectionChange();
    m_aSelectionLink.Call(true);
}

namespace
{
    // sit between the tree as drag source and the editview as drop target and translate
    // the tree dnd data to the simple string the editview wants
    class DropTargetListener : public cppu::WeakImplHelper< css::datatransfer::dnd::XDropTargetListener,
                                                            css::datatransfer::dnd::XDropTarget >
    {
    private:
        css::uno::Reference<css::datatransfer::dnd::XDropTarget> m_xRealDropTarget;
        std::vector<css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>> m_aListeners;
        SwCustomizeAddressBlockDialog* m_pParentDialog;

        // XEventListener
        virtual void SAL_CALL disposing( const css::lang::EventObject& ) override
        {
            m_xRealDropTarget.clear();
            m_aListeners.clear();
        }

        // XDropTargetListener
        virtual void SAL_CALL drop( const css::datatransfer::dnd::DropTargetDropEvent& dtde ) override
        {
            SolarMutexGuard aGuard;

            auto aReplacement(dtde);

            Point aMousePos(dtde.LocationX, dtde.LocationY);
            bool bAllowed = m_pParentDialog->SetCursorLogicPosition(aMousePos);
            if (bAllowed)
            {
                if (weld::TreeView* pTree = m_pParentDialog->get_drag_source())
                {
                    int nEntry = pTree->get_selected_index();
                    if (nEntry != -1)
                    {
                        sal_Int32 nUserData = pTree->get_id(nEntry).toInt32();
                        //special entries can only be once in the address / greeting
                        if (nUserData >= 0 || !m_pParentDialog->HasItem(nUserData))
                        {
                            rtl::Reference<TransferDataContainer> xContainer = new TransferDataContainer;
                            xContainer->CopyString( "<" + pTree->get_text(nEntry) + ">" );

                            // replace what the treeview is offering with what ImpEditView::drop wants
                            aReplacement.Transferable = xContainer.get();
                        }
                    }
                }
            }

            std::vector<css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>> aListeners(m_aListeners);
            for (auto const& listener : aListeners)
                listener->drop(aReplacement);

            if (bAllowed)
                m_pParentDialog->UpdateFields();
        }

        virtual void SAL_CALL dragEnter( const css::datatransfer::dnd::DropTargetDragEnterEvent& dtdee ) override
        {
            auto aReplacement(dtdee);
            // replace what the treeview is offering with what ImpEditView::dragEnter wants
            aReplacement.SupportedDataFlavors.realloc(1);
            SotExchange::GetFormatDataFlavor(SotClipboardFormatId::STRING, aReplacement.SupportedDataFlavors.getArray()[0]);

            std::vector<css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>> aListeners(m_aListeners);
            for (auto const& listener : aListeners)
                listener->dragEnter(aReplacement);
        }

        virtual void SAL_CALL dragExit( const css::datatransfer::dnd::DropTargetEvent& dte ) override
        {
            std::vector<css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>> aListeners(m_aListeners);
            for (auto const& listener : aListeners)
                listener->dragExit( dte );
        }

        virtual void SAL_CALL dragOver( const css::datatransfer::dnd::DropTargetDragEvent& dtde ) override
        {
            std::vector<css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>> aListeners(m_aListeners);
            for (auto const& listener : aListeners)
                listener->dragOver( dtde );
        }

        virtual void SAL_CALL dropActionChanged( const css::datatransfer::dnd::DropTargetDragEvent& dtde ) override
        {
            std::vector<css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>> aListeners(m_aListeners);
            for (auto const& listener : aListeners)
                listener->dropActionChanged( dtde );
        }

        // XDropTarget
        virtual void SAL_CALL addDropTargetListener(const css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>& xListener) override
        {
            m_aListeners.push_back(xListener);
        }

        virtual void SAL_CALL removeDropTargetListener(const css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>& xListener) override
        {
            m_aListeners.erase(std::remove(m_aListeners.begin(), m_aListeners.end(), xListener), m_aListeners.end());
        }

        virtual sal_Bool SAL_CALL isActive() override
        {
            return m_xRealDropTarget->isActive();
        }

        virtual void SAL_CALL setActive(sal_Bool active) override
        {
            m_xRealDropTarget->setActive(active);
        }

        virtual sal_Int8 SAL_CALL getDefaultActions() override
        {
            return m_xRealDropTarget->getDefaultActions();
        }

        virtual void SAL_CALL setDefaultActions(sal_Int8 actions) override
        {
            m_xRealDropTarget->setDefaultActions(actions);
        }

    public:
        DropTargetListener(css::uno::Reference<css::datatransfer::dnd::XDropTarget> xRealDropTarget,
                           SwCustomizeAddressBlockDialog* pParentDialog)
            : m_xRealDropTarget(std::move(xRealDropTarget))
            , m_pParentDialog(pParentDialog)
        {
        }
    };
}

css::uno::Reference<css::datatransfer::dnd::XDropTarget> AddressMultiLineEdit::GetDropTarget()
{
    if (!m_xDropTarget.is())
    {
        auto xRealDropTarget = GetDrawingArea()->get_drop_target();
        rtl::Reference<DropTargetListener> pProxy = new DropTargetListener(xRealDropTarget, m_pParentDialog);
        xRealDropTarget->addDropTargetListener(pProxy);
        m_xDropTarget = pProxy;
    }
    return m_xDropTarget;
}

bool AddressMultiLineEdit::SetCursorLogicPosition(const Point& rPosition)
{
    Point aMousePos = EditViewOutputDevice().PixelToLogic(rPosition);
    m_xEditView->SetCursorLogicPosition(aMousePos, false, true);

    ESelection aSelection = m_xEditView->GetSelection();
    std::vector<EECharAttrib> aAttribList;
    m_xEditEngine->GetCharAttribs(aSelection.nStartPara, aAttribList);
    return FindCharAttrib(aSelection.nStartPos, aAttribList) == nullptr;
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
/span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=3cdc8c27672e7e9253c9ca9abfc611a0f789da9c'>Missing include</a></td><td>Stephan Bergmann</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I094b4a1c89676426b286f72a2f510e48fed98b3b


</td></tr>
<tr class='logheader'><td><span title='2016-03-22 08:56:08 +0000'>2016-03-22</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=7e2ea27e5d56f5cf767a6718a0f5edc28e24af14'>tdf#93553 limit parallelism at zip save time to useful amount</a><span class='decoration'></span></td><td>Armin Le Grand</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
At ODT export time writing and zipping comtained data packages is nicely
parallelized, but not limited to an upper bounds of threads to use.
Together with memory consumption this makes ressource usage and runtime
behaviour bad to crashing (mostly on 32bit).
I have now limited the processing dependent on the number of available
cores to get a good processing/ressource ratio. The result uses much less
memory, is faster and runs on 32bit systems.

Change-Id: I8bd516a9a0cefd644f5d7001214bc717f29770ab
Reviewed-on: https://gerrit.libreoffice.org/23305
Tested-by: Jenkins &lt;ci@libreoffice.org&gt;
Reviewed-by: Noel Grandin &lt;noelgrandin@gmail.com&gt;


</td></tr>
<tr class='logheader'><td><span title='2016-03-18 06:00:58 +0000'>2016-03-18</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=6b84445e33cb13602a0da9ab92d382748bcbbd51'>loplugin:constantparam in package</a><span class='decoration'></span></td><td>Noel Grandin</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: Ifd9bb81ff9ccfaf5093c04024d7ea93946b00e66
Reviewed-on: https://gerrit.libreoffice.org/23329
Tested-by: Jenkins &lt;ci@libreoffice.org&gt;
Reviewed-by: Noel Grandin &lt;noelgrandin@gmail.com&gt;


</td></tr>
<tr class='logheader'><td><span title='2016-02-05 06:48:38 +0000'>2016-02-05</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=534b2a4b58ba765dbc256d6297e33453524915e2'>Fix typos</a><span class='decoration'></span></td><td>Andrea Gelmini</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: Ice72f8d9971e15dd6ef365e64cd567b8581a92d3
Reviewed-on: https://gerrit.libreoffice.org/21797
Tested-by: Jenkins &lt;ci@libreoffice.org&gt;
Reviewed-by: Ashod Nakashian &lt;ashnakash@gmail.com&gt;


</td></tr>
<tr class='logheader'><td><span title='2016-01-25 08:52:03 +0200'>2016-01-25</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=752cd07d085ac0aadc99bd512d49072843139032'>InterfaceContainer2 with vector instead of Sequence</a><span class='decoration'></span></td><td>Noel Grandin</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
create an InterfaceContainer2 class to replace InterfaceContainer.
It uses a std::vector instead of a Sequence for the mutable listener
list, which provides far better performance.

Switch all our internal use-sites to the new class.

Change-Id: I6b56cfa511ded2395faa22e68fab3b2f16c3cb88


</td></tr>
<tr class='logheader'><td><span title='2016-01-08 06:46:18 +0000'>2016-01-08</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=eaed822c9cf6b3762f727f1281003dafd300df6d'>tdf#89236: Don't deflate encrypted document in parallel</a><span class='decoration'></span></td><td>Matúš Kukan</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
I see "warn:legacy.osl:22439:1:package/source/zipapi/ZipFile.cxx:583:
Can't detect password correctness without digest!"
when opening file saved with password.

Obviously css::xml::crypto::XDigestContext used in ZipOutputEntry does not
work properly when encrypting files in parallel, so don't do that.

Change-Id: I4b354535240a4f31a6bc6855cf7f9af527634e7e
Reviewed-on: https://gerrit.libreoffice.org/21238
Tested-by: Jenkins &lt;ci@libreoffice.org&gt;
Reviewed-by: Matúš Kukan &lt;matus@libreoffice.org&gt;


</td></tr>
<tr class='logheader'><td><span title='2015-12-24 07:28:28 +0000'>2015-12-24</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=e3a31fcca771432a38e4c2e7cc4c4c6c1c157ee9'>loplugin:unusedfields</a><span class='decoration'></span></td><td>Noel Grandin</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I979592adb978c3757a1e54615021ee424a2e02bf
Reviewed-on: https://gerrit.libreoffice.org/20892
Tested-by: Jenkins &lt;ci@libreoffice.org&gt;
Reviewed-by: Noel Grandin &lt;noelgrandin@gmail.com&gt;


</td></tr>
<tr class='logheader'><td><span title='2015-11-19 09:33:29 +0200'>2015-11-19</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=2554efabb6d7cd2ad9f7cfdddd0712c25cdca1cd'>use comphelper::containerToSequence</a><span class='decoration'></span></td><td>Noel Grandin</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
in chart2, we remove a local equivalent of the method

Change-Id: I25129a3d1ea1dd724eb9cd38a57be37a78b3d100


</td></tr>
<tr class='logheader'><td><span title='2015-11-15 12:18:55 +0000'>2015-11-15</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=25aec383f95fded43b3fe5fc588b4ebdc6d7d272'>use initialiser for Sequence&lt;OUString&gt;</a><span class='decoration'></span></td><td>Noel Grandin</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
replaced using:
git grep -lP 'Sequence.*OUString.*\(\s*1\s*\)'
| xargs perl -0777 -pi -e
"s/Sequence&lt;\s*OUString\s*&gt; (\w+)\(\s*1\s*\);
.*\[0\] = (\S+);/Sequence&lt;OUString&gt; \1 { \2 };/g"

Change-Id: I20ad0489da887a9712982531c3b127339bb8b3b9
Reviewed-on: https://gerrit.libreoffice.org/19969
Tested-by: Jenkins &lt;ci@libreoffice.org&gt;
Reviewed-by: Noel Grandin &lt;noelgrandin@gmail.com&gt;


</td></tr>
<tr class='logheader'><td><span title='2015-11-15 10:13:08 +0000'>2015-11-15</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=8e234c5b7d5bae66c544e581bee5770f3f83dd81'>use initialiser syntax for Sequence&lt;OUString&gt;</a><span class='decoration'></span></td><td>Noel Grandin</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
replaced using the script:

git grep -lP 'Sequence.*OUString.*\(1\)'
  | xargs perl -0777 -pi
    -e "s/Sequence&lt; OUString &gt; (\w+)\(1\);
.*\[0\] = (\S+);/Sequence&lt; OUString &gt; \1 { \2 };/g"

Change-Id: I23688a91562051a8eed11fc2a85599545c285c34
Reviewed-on: https://gerrit.libreoffice.org/19967
Tested-by: Jenkins &lt;ci@libreoffice.org&gt;
Reviewed-by: Noel Grandin &lt;noelgrandin@gmail.com&gt;


</td></tr>
<tr class='logheader'><td><span title='2015-11-10 10:31:33 +0100'>2015-11-10</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=1fc2fe74f2db49b17abc3c4df7feec4f215052ca'>loplugin:nullptr (automatic rewrite)</a></td><td>Stephan Bergmann</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I1e5338558bc57afe51db57655550e9b7246f7214


</td></tr>
<tr class='logheader'><td><span title='2015-11-04 14:42:23 +0200'>2015-11-04</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=5ced1a6e42ff7e2425a9e1c374eb25295091b26d'>use uno::Reference::set method instead of assignment</a></td><td>Noel Grandin</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I1c7240fe2e2b5eb825f028ca7502e5ba8793046b


</td></tr>
<tr class='logheader'><td><span title='2015-10-23 15:14:45 +0200'>2015-10-23</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=8d80b5be024bdbcfedd41b32cbb5c6b71724dd33'>com::sun::star-&gt;css in package,pyuno</a><span class='decoration'></span></td><td>Noel Grandin</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I7b7b0e7fea2d1a2b9f6f5501ad5e0b8c1b4a17b9


</td></tr>
<tr class='logheader'><td><span title='2015-10-12 17:52:29 +0200'>2015-10-12</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=b36963c0a6a09f70ca6d8d607dd3249a3496497d'>Replace "SAL_OVERRIDE" with "override" in LIBO_INTERNAL_ONLY code</a></td><td>Stephan Bergmann</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I2ea407acd763ef2d7dae2d3b8f32525523ac8274


</td></tr>
<tr class='logheader'><td><span title='2015-10-07 15:43:44 +0200'>2015-10-07</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=db34ab81ae170cf9ec1c4421e0f05d65747caa3e'>clang-analyzer-deadcode.DeadStores</a></td><td>Stephan Bergmann</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I823aab2038eb08f4061e353b5fafc12b8e60e671


</td></tr>
<tr class='logheader'><td><span title='2015-09-30 10:59:35 +0000'>2015-09-30</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=3764f7435eb00053e04ea3e8f042fcfc5c7826f2'>Fix typos</a><span class='decoration'></span></td><td>Andrea Gelmini</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: Id27f5a357c1333dec5c24c4f5e0fdaed7a775774
Reviewed-on: https://gerrit.libreoffice.org/18963
Reviewed-by: Samuel Mehrbrodt &lt;Samuel.Mehrbrodt@cib.de&gt;
Tested-by: Samuel Mehrbrodt &lt;Samuel.Mehrbrodt@cib.de&gt;


</td></tr>
<tr class='logheader'><td><span title='2015-09-18 07:59:14 +0000'>2015-09-18</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=3a00aaef2a51d7a1a87475a316dc9ae232fac60c'>boost-&gt;std</a><span class='decoration'></span></td><td>Caolán McNamara</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: Ie490bf2c6921f393bdeed96b1a8815996b701bf0
Reviewed-on: https://gerrit.libreoffice.org/18670
Tested-by: Jenkins &lt;ci@libreoffice.org&gt;
Reviewed-by: Caolán McNamara &lt;caolanm@redhat.com&gt;
Tested-by: Caolán McNamara &lt;caolanm@redhat.com&gt;


</td></tr>
<tr class='logheader'><td><span title='2015-08-26 06:35:34 +0000'>2015-08-26</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=5ba6aafa20f78c6209c91a399a8110a415a274e1'>package: tdf#88206 replace cppu::WeakImplHelper* etc.</a><span class='decoration'></span></td><td>Takeshi Abe</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
with the variadic variants.

Change-Id: If88e1d741075e86997c91dc2c59eeebe45f67c1f
Reviewed-on: https://gerrit.libreoffice.org/17980
Reviewed-by: Noel Grandin &lt;noelgrandin@gmail.com&gt;
Tested-by: Noel Grandin &lt;noelgrandin@gmail.com&gt;


</td></tr>
<tr class='logheader'><td><span title='2015-08-19 12:24:37 +0200'>2015-08-19</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=5da0dce19caaf87a6fe53750a7e9ea5d564d6a12'>Consolidate isFileUrl checks</a></td><td>Stephan Bergmann</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I1b74fdfaa09c4d0d6c296253958e83e78b546a9a


</td></tr>
<tr class='logheader'><td><span title='2015-08-18 15:32:14 +0200'>2015-08-18</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=0b9b5f833cd8bb85437f2f89dcd3190eee1c161a'>Simplify ZipPackage::isLocalFile check</a></td><td>Stephan Bergmann</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
(vnd.sun.star.wfs is long gone)

Change-Id: I3e25f1728504cbad07bb97187a7bac23b33695dc


</td></tr>
<tr class='logheader'><td><span title='2015-08-17 14:55:14 +0100'>2015-08-17</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/package/source/zippackage?h=feature/taggedPDF&amp;id=a19e2064c09275e9b053cc6c13d319c1a5c1c992'>avoid possible leak on exception</a></td><td>Caolán McNamara</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: Id3c16e5fedc5e57c8daccafa25bdb2fbbd0131b0


</td></tr>