/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define USER_DATA_VERSION_1 "1" #define USER_DATA_VERSION USER_DATA_VERSION_1 SwFldVarPage::SwFldVarPage(Window* pParent, const SfxItemSet& rCoreSet ) : SwFldPage ( pParent, SW_RES( TP_FLD_VAR ), rCoreSet ), aTypeFT (this, SW_RES(FT_VARTYPE)), aTypeLB (this, SW_RES(LB_VARTYPE)), aSelectionFT (this, SW_RES(FT_VARSELECTION)), aSelectionLB (this, SW_RES(LB_VARSELECTION)), aNameFT (this, SW_RES(FT_VARNAME)), aNameED (this, SW_RES(ED_VARNAME)), aValueFT (this, SW_RES(FT_VARVALUE)), aValueED (this, SW_RES(ED_VARVALUE)), aFormatFT (this, SW_RES(FT_VARFORMAT)), aNumFormatLB (this, SW_RES(LB_VARNUMFORMAT)), aFormatLB (this, SW_RES(LB_VARFORMAT)), aChapterHeaderFT(this, SW_RES(FT_VARCHAPTERHEADER)), aChapterLevelFT (this, SW_RES(FT_VARCHAPTERLEVEL)), aChapterLevelLB (this, SW_RES(LB_VARCHAPTERLEVEL)), aInvisibleCB (this, SW_RES(CB_VARINVISIBLE)), aSeparatorFT (this, SW_RES(FT_VARSEPARATOR)), aSeparatorED (this, SW_RES(ED_VARSEPARATOR)), aNewDelTBX (this, SW_RES(TBX_VARNEWDEL)), bInit (sal_True) { FreeResource(); aNewDelTBX.SetSizePixel( aNewDelTBX.CalcWindowSizePixel() ); long nDelta = ( aValueED.GetSizePixel().Height() - aNewDelTBX.GetSizePixel().Height() ) / 2; Point aNewPnt = aNewDelTBX.GetPosPixel(); aNewPnt.Y() += nDelta; aNewDelTBX.SetPosPixel( aNewPnt ); sOldValueFT = aValueFT.GetText(); sOldNameFT = aNameFT.GetText(); for (sal_uInt16 i = 1; i <= MAXLEVEL; i++) aChapterLevelLB.InsertEntry(String::CreateFromInt32(i)); aChapterLevelLB.SelectEntryPos(0); //enable 'active' language selection aNumFormatLB.SetShowLanguageControl(sal_True); } SwFldVarPage::~SwFldVarPage() { } void SwFldVarPage::Reset(const SfxItemSet& ) { SavePos(&aTypeLB); Init(); // general initialisation aTypeLB.SetUpdateMode(sal_False); aTypeLB.Clear(); sal_uInt16 nPos, nTypeId; if (!IsFldEdit()) { // initialise TypeListBox const SwFldGroupRgn& rRg = GetFldMgr().GetGroupRange(IsFldDlgHtmlMode(), GetGroup()); for (short i = rRg.nStart; i < rRg.nEnd; ++i) { nTypeId = GetFldMgr().GetTypeId(i); nPos = aTypeLB.InsertEntry(GetFldMgr().GetTypeStr(i)); aTypeLB.SetEntryData(nPos, reinterpret_cast(nTypeId)); } } else { SwField* pCurField = GetCurField(); nTypeId = pCurField->GetTypeId(); if (nTypeId == TYP_SETINPFLD) nTypeId = TYP_INPUTFLD; nPos = aTypeLB.InsertEntry(GetFldMgr().GetTypeStr(GetFldMgr().GetPos(nTypeId))); aTypeLB.SetEntryData(nPos, reinterpret_cast(nTypeId)); aNumFormatLB.SetAutomaticLanguage(pCurField->IsAutomaticLanguage()); SwWrtShell *pSh = GetWrtShell(); if(!pSh) pSh = ::GetActiveWrtShell(); if(pSh) { const SvNumberformat* pFormat = pSh->GetNumberFormatter()->GetEntry(pCurField->GetFormat()); if(pFormat) aNumFormatLB.SetLanguage(pFormat->GetLanguage()); } } // select old Pos RestorePos(&aTypeLB); aTypeLB.SetDoubleClickHdl (LINK(this, SwFldVarPage, InsertHdl)); aTypeLB.SetSelectHdl (LINK(this, SwFldVarPage, TypeHdl)); aSelectionLB.SetSelectHdl (LINK(this, SwFldVarPage, SubTypeHdl)); aSelectionLB.SetDoubleClickHdl (LINK(this, SwFldVarPage, InsertHdl)); aFormatLB.SetDoubleClickHdl (LINK(this, SwFldVarPage, InsertHdl)); aNumFormatLB.SetDoubleClickHdl (LINK(this, SwFldVarPage, InsertHdl)); aNameED.SetModifyHdl (LINK(this, SwFldVarPage, ModifyHdl)); aValueED.SetModifyHdl (LINK(this, SwFldVarPage, ModifyHdl)); aNewDelTBX.SetClickHdl (LINK(this, SwFldVarPage, TBClickHdl)); aChapterLevelLB.SetSelectHdl (LINK(this, SwFldVarPage, ChapterHdl)); aSeparatorED.SetModifyHdl (LINK(this, SwFldVarPage, SeparatorHdl)); if( !IsRefresh() ) { String sUserData = GetUserData(); if(!IsRefresh() && sUserData.GetToken(0, ';').EqualsIgnoreCaseAscii(USER_DATA_VERSION_1)) { String sVal = sUserData.GetToken(1, ';'); sal_uInt16 nVal = (sal_uInt16)sVal.ToInt32(); if( USHRT_MAX != nVal ) { for(sal_uInt16 i = 0; i < aTypeLB.GetEntryCount(); i++) if(nVal == (sal_uInt16)(sal_uLong)aTypeLB.GetEntryData(i)) { aTypeLB.SelectEntryPos(i); break; } } } } TypeHdl(0); aTypeLB.SetUpdateMode(sal_True); if (IsFldEdit()) { aSelectionLB.SaveValue(); aFormatLB.SaveValue(); nOldFormat = aNumFormatLB.GetFormat(); aNameED.SaveValue(); aValueED.SaveValue(); aInvisibleCB.SaveValue(); aChapterLevelLB.SaveValue(); aSeparatorED.SaveValue(); } } IMPL_LINK_NOARG(SwFldVarPage, TypeHdl) { // save old ListBoxPos const sal_uInt16 nOld = GetTypeSel(); // current ListBoxPos SetTypeSel(aTypeLB.GetSelectEntryPos()); if(GetTypeSel() == LISTBOX_ENTRY_NOTFOUND) { SetTypeSel(0); aTypeLB.SelectEntryPos(0); } if (nOld != GetTypeSel() || nOld == LISTBOX_ENTRY_NOTFOUND) { bInit = sal_True; if (nOld != LISTBOX_ENTRY_NOTFOUND) { aNameED.SetText(aEmptyStr); aValueED.SetText(aEmptyStr); } aValueED.SetDropEnable(sal_False); UpdateSubType(); // initialise selection-listboxes } bInit = sal_False; return 0; } IMPL_LINK( SwFldVarPage, SubTypeHdl, ListBox *, pBox ) { sal_uInt16 nTypeId = (sal_uInt16)(sal_uLong)aTypeLB.GetEntryData(GetTypeSel()); sal_uInt16 nSelPos = aSelectionLB.GetSelectEntryPos(); if (nSelPos != LISTBOX_ENTRY_NOTFOUND) nSelPos = (sal_uInt16)(sal_uLong)aSelectionLB.GetEntryData(nSelPos); if (IsFldEdit() && (!pBox || bInit)) { if (nTypeId != TYP_FORMELFLD) aNameED.SetText(GetFldMgr().GetCurFldPar1()); aValueED.SetText(GetFldMgr().GetCurFldPar2()); } if (aNameFT.GetText() != sOldNameFT) aNameFT.SetText(sOldNameFT); if (aValueFT.GetText() != sOldValueFT) aValueFT.SetText(sOldValueFT); aNumFormatLB.SetUpdateMode(sal_False); aFormatLB.SetUpdateMode(sal_False); FillFormatLB(nTypeId); sal_uInt16 nSize = aFormatLB.GetEntryCount(); sal_Bool bValue = sal_False, bName = sal_False, bNumFmt = sal_False, bInvisible = sal_False, bSeparator = sal_False, bChapterLevel = sal_False; sal_Bool bFormat = nSize != 0; switch (nTypeId) { case TYP_USERFLD: { // change or create user type SwUserFieldType* pType = (SwUserFieldType*) GetFldMgr().GetFldType(RES_USERFLD, nSelPos); if (pType) { if (!IsFldEdit()) { if (pBox || (bInit && !IsRefresh())) // only when interacting via mouse { aNameED.SetText(pType->GetName()); if (pType->GetType() == UF_STRING) { aValueED.SetText(pType->GetContent()); aNumFormatLB.SelectEntryPos(0); } else aValueED.SetText(pType->GetContent()); } } else aValueED.SetText(pType->GetContent()); } else { if (pBox) // only when interacting via mouse { aNameED.SetText(aEmptyStr); aValueED.SetText(aEmptyStr); } } bValue = bName = bNumFmt = bInvisible = sal_True; aValueED.SetDropEnable(sal_True); break; } case TYP_SETFLD: bValue = sal_True; bNumFmt = bInvisible = sal_True; if (!IsFldDlgHtmlMode()) bName = sal_True; else { aNumFormatLB.Clear(); sal_uInt16 nPos = aNumFormatLB.InsertEntry(SW_RESSTR(FMT_SETVAR_TEXT), 0); aNumFormatLB.SetEntryData(nPos, (void *)ULONG_MAX); aNumFormatLB.SelectEntryPos(0); } // is there a corresponding SetField if (IsFldEdit() || pBox) // only when interacting via mouse { if (nSelPos != LISTBOX_ENTRY_NOTFOUND) { String sName(aSelectionLB.GetSelectEntry()); aNameED.SetText(sName); if (!IsFldDlgHtmlMode()) { SwWrtShell *pSh = GetWrtShell(); if(!pSh) pSh = ::GetActiveWrtShell(); if(pSh) { SwSetExpFieldType* pSetTyp = (SwSetExpFieldType*) pSh->GetFldType(RES_SETEXPFLD, sName); if (pSetTyp && pSetTyp->GetType() == nsSwGetSetExpType::GSE_STRING) aNumFormatLB.SelectEntryPos(0); // textual } } } } if (IsFldEdit()) { // GetFormula leads to problems with date formats because // only the numeric value without formating is returned. // It must be used though because otherwise in GetPar2 only // the value calculated by Kalkulator would be displayed // (instead of test2 = test + 1) aValueED.SetText(((SwSetExpField*)GetCurField())->GetFormula()); } aValueED.SetDropEnable(sal_True); break; case TYP_FORMELFLD: { bValue = sal_True; bNumFmt = sal_True; aValueFT.SetText(SW_RESSTR(STR_FORMULA)); aValueED.SetDropEnable(sal_True); } break; case TYP_GETFLD: { if (!IsFldEdit()) { aNameED.SetText(aEmptyStr); aValueED.SetText(aEmptyStr); } if (nSelPos != LISTBOX_ENTRY_NOTFOUND) { String sName(aSelectionLB.GetSelectEntry()); if (!IsFldEdit()) aNameED.SetText(sName); // is there a corresponding SetField SwWrtShell *pSh = GetWrtShell(); if(!pSh) pSh = ::GetActiveWrtShell(); if(pSh) { SwSetExpFieldType* pSetTyp = (SwSetExpFieldType*) pSh->GetFldType(RES_SETEXPFLD, sName); if(pSetTyp) { if (pSetTyp->GetType() & nsSwGetSetExpType::GSE_STRING) // textual? bFormat = sal_True; else // numeric bNumFmt = sal_True; } } } else bFormat = sal_False; EnableInsert(bFormat|bNumFmt); } break; case TYP_INPUTFLD: aValueFT.SetText(SW_RESSTR(STR_PROMPT)); if (nSelPos != LISTBOX_ENTRY_NOTFOUND) { bValue = bNumFmt = sal_True; String sName; sName = aSelectionLB.GetSelectEntry(); aNameED.SetText( sName ); // User- or SetField ? sal_uInt16 nInpType = 0; nInpType = static_cast< sal_uInt16 >(GetFldMgr().GetFldType(RES_USERFLD, sName) ? 0 : TYP_SETINPFLD); if (nInpType) // SETEXPFLD { // is there a corresponding SetField SwSetExpFieldType* pSetTyp = (SwSetExpFieldType*) GetFldMgr().GetFldType(RES_SETEXPFLD, sName); if(pSetTyp) { if (pSetTyp->GetType() == nsSwGetSetExpType::GSE_STRING) // textual? { aNumFormatLB.Clear(); sal_uInt16 nPos = aNumFormatLB.InsertEntry(SW_RESSTR(FMT_USERVAR_TEXT), 0); aNumFormatLB.SetEntryData(nPos, (void *)ULONG_MAX); aNumFormatLB.SelectEntryPos(0); } } if (IsFldEdit() && (!pBox || bInit) ) aValueED.SetText(((SwSetExpField*)GetCurField())->GetPromptText()); } else // USERFLD bFormat = bNumFmt = sal_False; } break; case TYP_DDEFLD: aValueFT.SetText(SW_RESSTR(STR_DDE_CMD)); if (IsFldEdit() || pBox) // only when interacting via mouse { if (nSelPos != LISTBOX_ENTRY_NOTFOUND) { SwDDEFieldType* pType = (SwDDEFieldType*) GetFldMgr().GetFldType(RES_DDEFLD, nSelPos); if(pType) { aNameED.SetText(pType->GetName()); //JP 28.08.95: DDE-Topics/-Items can have blanks in their names! // That's not considered here yet String sCmd( pType->GetCmd() ); sal_uInt16 nTmpPos = sCmd.SearchAndReplace( sfx2::cTokenSeperator, ' ' ); sCmd.SearchAndReplace( sfx2::cTokenSeperator, ' ', nTmpPos ); aValueED.SetText( sCmd ); aFormatLB.SelectEntryPos(pType->GetType()); } } } bName = bValue = sal_True; break; case TYP_SEQFLD: { bName = bValue = bSeparator = bChapterLevel = sal_True; SwFieldType* pFldTyp; if( IsFldEdit() ) pFldTyp = GetCurField()->GetTyp(); else { String sFldTypeName( aSelectionLB.GetEntry( nSelPos )); if( sFldTypeName.Len() ) pFldTyp = GetFldMgr().GetFldType( RES_SETEXPFLD, sFldTypeName ); else pFldTyp = 0; } if( IsFldEdit() ) aValueED.SetText( ((SwSetExpField*)GetCurField())-> GetFormula() ); if( IsFldEdit() || pBox ) // only when interacting via mouse aNameED.SetText( aSelectionLB.GetSelectEntry() ); if( pFldTyp ) { sal_uInt8 nLevel = ((SwSetExpFieldType*)pFldTyp)->GetOutlineLvl(); if( 0x7f == nLevel ) aChapterLevelLB.SelectEntryPos( 0 ); else aChapterLevelLB.SelectEntryPos( nLevel + 1 ); String sDelim = ((SwSetExpFieldType*)pFldTyp)->GetDelimiter(); aSeparatorED.SetText( sDelim ); ChapterHdl(); } } break; case TYP_SETREFPAGEFLD: { bValue = sal_False; aValueFT.SetText( SW_RESSTR( STR_OFFSET )); if (IsFldEdit() || pBox) // only when interacting via mouse aNameED.SetText(aEmptyStr); if (nSelPos != 0 && nSelPos != LISTBOX_ENTRY_NOTFOUND) { bValue = sal_True; // SubType OFF - knows no Offset if (IsFldEdit()) aValueED.SetText(String::CreateFromInt32(((SwRefPageSetField*)GetCurField())->GetOffset())); } } break; case TYP_GETREFPAGEFLD: aNameED.SetText(aEmptyStr); aValueED.SetText(aEmptyStr); break; } aNumFormatLB.Show(bNumFmt); aFormatLB.Show(!bNumFmt); if (IsFldEdit()) bName = sal_False; aFormatLB.Enable(bFormat); aFormatFT.Enable(bFormat|bNumFmt); aNameFT.Enable(bName); aNameED.Enable(bName); aValueFT.Enable(bValue); aValueED.Enable(bValue); Size aSz(aFormatLB.GetSizePixel()); if (bChapterLevel) aSz.Height() = aFormatLB.LogicToPixel(Size(1, 94), MAP_APPFONT).Height(); else aSz.Height() = aFormatLB.LogicToPixel(Size(1, 123), MAP_APPFONT).Height(); aFormatLB.SetSizePixel(aSz); aInvisibleCB.Show(!bSeparator); aSeparatorFT.Show(bSeparator); aSeparatorED.Show(bSeparator); aChapterHeaderFT.Show(bChapterLevel); aChapterLevelFT.Show(bChapterLevel); aChapterLevelLB.Show(bChapterLevel); aInvisibleCB.Enable(bInvisible); ModifyHdl(); // apply/insert/delete status update aNumFormatLB.SetUpdateMode(sal_True); aFormatLB.SetUpdateMode(sal_True); if(aSelectionLB.IsCallAddSelection()) { nTypeId = (sal_uInt16)(sal_uLong)aTypeLB.GetEntryData(GetTypeSel()); switch (nTypeId) { case TYP_FORMELFLD: { nSelPos = aSelectionLB.GetSelectEntryPos(); if (nSelPos != LISTBOX_ENTRY_NOTFOUND) nSelPos = (sal_uInt16)(sal_uLong)aSelectionLB.GetEntryData(nSelPos); if (nSelPos != LISTBOX_ENTRY_NOTFOUND && pBox && !bInit) { aValueED.ReplaceSelected(aSelectionLB.GetSelectEntry()); ModifyHdl(); } } break; } aSelectionLB.ResetCallAddSelection(); } return 0; } /*-------------------------------------------------------------------- Description: renew types in SelectionBox --------------------------------------------------------------------*/ void SwFldVarPage::UpdateSubType() { String sOldSel; sal_uInt16 nTypeId = (sal_uInt16)(sal_uLong)aTypeLB.GetEntryData(GetTypeSel()); SetSelectionSel(aSelectionLB.GetSelectEntryPos()); if(GetSelectionSel() != LISTBOX_ENTRY_NOTFOUND) sOldSel = aSelectionLB.GetEntry(GetSelectionSel()); // fill Selection-Listbox aSelectionLB.SetUpdateMode(sal_False); aSelectionLB.Clear(); std::vector aList; GetFldMgr().GetSubTypes(nTypeId, aList); size_t nCount = aList.size(); size_t nPos; for(size_t i = 0; i < nCount; ++i) { if (nTypeId != TYP_INPUTFLD || i) { if (!IsFldEdit()) { nPos = aSelectionLB.InsertEntry(aList[i]); aSelectionLB.SetEntryData(nPos, reinterpret_cast(i)); } else { sal_Bool bInsert = sal_False; switch (nTypeId) { case TYP_INPUTFLD: if (aList[i] == GetCurField()->GetPar1()) bInsert = sal_True; break; case TYP_FORMELFLD: bInsert = sal_True; break; case TYP_GETFLD: if (aList[i].equals(((const SwFormulaField*)GetCurField())->GetFormula())) bInsert = sal_True; break; case TYP_SETFLD: case TYP_USERFLD: if (aList[i] == GetCurField()->GetTyp()->GetName()) { bInsert = sal_True; if (GetCurField()->GetSubType() & nsSwExtendedSubType::SUB_INVISIBLE) aInvisibleCB.Check(); } break; case TYP_SETREFPAGEFLD: if ((((SwRefPageSetField*)GetCurField())->IsOn() && i) || (!((SwRefPageSetField*)GetCurField())->IsOn() && !i)) sOldSel = aList[i]; // allow all entries for selection: nPos = aSelectionLB.InsertEntry(aList[i]); aSelectionLB.SetEntryData(nPos, reinterpret_cast(i)); break; default: if (aList[i] == GetCurField()->GetPar1()) bInsert = sal_True; break; } if (bInsert) { nPos = aSelectionLB.InsertEntry(aList[i]); aSelectionLB.SetEntryData(nPos, reinterpret_cast(i)); if (nTypeId != TYP_FORMELFLD) break; } } } } sal_Bool bEnable = aSelectionLB.GetEntryCount() != 0; ListBox *pLB = 0; if (bEnable) { aSelectionLB.SelectEntry(sOldSel); if (!aSelectionLB.GetSelectEntryCount()) { aSelectionLB.SelectEntryPos(0); pLB = &aSelectionLB; // newly initialise all controls } } aSelectionLB.Enable( bEnable ); aSelectionFT.Enable( bEnable ); SubTypeHdl(pLB); aSelectionLB.SetUpdateMode(sal_True); } sal_uInt16 SwFldVarPage::FillFormatLB(sal_uInt16 nTypeId) { String sOldSel, sOldNumSel; sal_uLong nOldNumFormat = 0; sal_uInt16 nFormatSel = aFormatLB.GetSelectEntryPos(); if (nFormatSel != LISTBOX_ENTRY_NOTFOUND) sOldSel = aFormatLB.GetEntry(nFormatSel); sal_uInt16 nNumFormatSel = aNumFormatLB.GetSelectEntryPos(); if (nNumFormatSel != LISTBOX_ENTRY_NOTFOUND) { sOldNumSel = aNumFormatLB.GetEntry(nNumFormatSel); nOldNumFormat = aNumFormatLB.GetFormat(); } // fill Format-Listbox aFormatLB.Clear(); aNumFormatLB.Clear(); sal_Bool bSpecialFmt = sal_False; if( TYP_GETREFPAGEFLD != nTypeId ) { if (IsFldEdit()) { bSpecialFmt = GetCurField()->GetFormat() == SAL_MAX_UINT32; if (!bSpecialFmt) { aNumFormatLB.SetDefFormat(GetCurField()->GetFormat()); sOldNumSel = aEmptyStr; } else if (nTypeId == TYP_GETFLD || nTypeId == TYP_FORMELFLD) aNumFormatLB.SetFormatType(NUMBERFORMAT_NUMBER); } else { if (nOldNumFormat && nOldNumFormat != ULONG_MAX) aNumFormatLB.SetDefFormat(nOldNumFormat); else aNumFormatLB.SetFormatType(NUMBERFORMAT_NUMBER); } } switch (nTypeId) { case TYP_USERFLD: { if (!IsFldEdit() || bSpecialFmt) { sal_uInt16 nPos = aNumFormatLB.InsertEntry(SW_RESSTR(FMT_MARK_TEXT), 0); aNumFormatLB.SetEntryData(nPos, (void *)ULONG_MAX); nPos = aNumFormatLB.InsertEntry(SW_RESSTR(FMT_USERVAR_CMD), 1); aNumFormatLB.SetEntryData(nPos, (void *)ULONG_MAX); } } break; case TYP_SETFLD: { if (!IsFldEdit() || bSpecialFmt) { sal_uInt16 nPos = aNumFormatLB.InsertEntry(SW_RESSTR(FMT_SETVAR_TEXT), 0); aNumFormatLB.SetEntryData(nPos, (void *)ULONG_MAX); } } break; case TYP_FORMELFLD: { sal_uInt16 nPos = aNumFormatLB.InsertEntry(SW_RESSTR(FMT_GETVAR_NAME), 0); aNumFormatLB.SetEntryData(nPos, (void *)ULONG_MAX); } break; case TYP_GETFLD: { sal_uInt16 nPos = aNumFormatLB.InsertEntry(SW_RESSTR(FMT_GETVAR_NAME), 0); aNumFormatLB.SetEntryData(nPos, (void *)ULONG_MAX); } break; } if (IsFldEdit() && bSpecialFmt) { if (nTypeId == TYP_USERFLD && (GetCurField()->GetSubType() & nsSwExtendedSubType::SUB_CMD)) aNumFormatLB.SelectEntryPos(1); else aNumFormatLB.SelectEntryPos(0); } else { if (!nOldNumFormat && (nNumFormatSel = aNumFormatLB.GetEntryPos(sOldNumSel)) != LISTBOX_ENTRY_NOTFOUND) aNumFormatLB.SelectEntryPos(nNumFormatSel); else if (nOldNumFormat && nOldNumFormat == ULONG_MAX) aNumFormatLB.SelectEntry(sOldSel); } sal_uInt16 nSize = GetFldMgr().GetFormatCount(nTypeId, sal_False, IsFldDlgHtmlMode()); for (sal_uInt16 i = 0; i < nSize; i++) { sal_uInt16 nPos = aFormatLB.InsertEntry(GetFldMgr().GetFormatStr(nTypeId, i)); sal_uInt16 nFldId = GetFldMgr().GetFormatId( nTypeId, i ); aFormatLB.SetEntryData( nPos, reinterpret_cast(nFldId) ); if (IsFldEdit() && nFldId == GetCurField()->GetFormat()) aFormatLB.SelectEntryPos( nPos ); } if (nSize && (!IsFldEdit() || !aFormatLB.GetSelectEntryCount())) { aFormatLB.SelectEntry(sOldSel); if (!aFormatLB.GetSelectEntryCount()) { aFormatLB.SelectEntry(SW_RESSTR(FMT_NUM_PAGEDESC)); if (!aFormatLB.GetSelectEntryCount()) { aFormatLB.SelectEntry(SW_RESSTR(FMT_NUM_ARABIC)); if (!aFormatLB.GetSelectEntryCount()) aFormatLB.SelectEntryPos(0); } } } return nSize; } /*-------------------------------------------------------------------- Description: Modify --------------------------------------------------------------------*/ IMPL_LINK_NOARG(SwFldVarPage, ModifyHdl) { String sValue(aValueED.GetText()); sal_Bool bHasValue = sValue.Len() != 0; sal_uInt16 nTypeId = (sal_uInt16)(sal_uLong)aTypeLB.GetEntryData(GetTypeSel()); bool bInsert = false, bApply = false, bDelete = false; String sName( aNameED.GetText() ); xub_StrLen nLen = sName.Len(); switch( nTypeId ) { case TYP_DDEFLD: case TYP_USERFLD: case TYP_SETFLD: case TYP_SEQFLD: SwCalc::IsValidVarName( sName, &sName ); if( sName.Len() != nLen ) { nLen = sName.Len(); Selection aSel(aNameED.GetSelection()); aNameED.SetText( sName ); aNameED.SetSelection( aSel ); // restore Cursorpos } break; } // check buttons switch (nTypeId) { case TYP_DDEFLD: if( nLen ) { // is there already a corrensponding type bInsert = bApply = true; SwFieldType* pType = GetFldMgr().GetFldType(RES_DDEFLD, sName); SwWrtShell *pSh = GetWrtShell(); if(!pSh) pSh = ::GetActiveWrtShell(); if(pSh && pType) bDelete = !pSh->IsUsed( *pType ); } break; case TYP_USERFLD: if( nLen ) { // is there already a corresponding type SwFieldType* pType = GetFldMgr().GetFldType(RES_USERFLD, sName); SwWrtShell *pSh = GetWrtShell(); if(!pSh) pSh = ::GetActiveWrtShell(); if(pSh && pType) bDelete = !pSh->IsUsed( *pType ); pType = GetFldMgr().GetFldType(RES_SETEXPFLD, sName); if (!pType) // no name conflict with variables { // user fields can also be inserted without content! // Bug #56845 bInsert = bApply = true; } } break; default: bInsert = true; if (nTypeId == TYP_SETFLD || nTypeId == TYP_SEQFLD) { SwSetExpFieldType* pFldType = (SwSetExpFieldType*) GetFldMgr().GetFldType(RES_SETEXPFLD, sName); if (pFldType) { SwWrtShell *pSh = GetWrtShell(); if(!pSh) pSh = ::GetActiveWrtShell(); if(pSh) { const SwFldTypes* p = pSh->GetDoc()->GetFldTypes(); sal_uInt16 i; for (i = 0; i < INIT_FLDTYPES; i++) { SwFieldType* pType = (*p)[ i ]; if (pType == pFldType) break; } if (i >= INIT_FLDTYPES && !pSh->IsUsed(*pFldType)) bDelete = true; if (nTypeId == TYP_SEQFLD && !(pFldType->GetType() & nsSwGetSetExpType::GSE_SEQ)) bInsert = false; if (nTypeId == TYP_SETFLD && (pFldType->GetType() & nsSwGetSetExpType::GSE_SEQ)) bInsert = false; } } if (GetFldMgr().GetFldType(RES_USERFLD, sName)) bInsert = false; } if( !nLen && ( nTypeId == TYP_SETFLD || (!IsFldEdit() && nTypeId == TYP_GETFLD ) ) ) bInsert = false; if( (nTypeId == TYP_SETFLD || nTypeId == TYP_FORMELFLD) && !bHasValue ) bInsert = false; break; } aNewDelTBX.EnableItem(BT_VARAPPLY, bApply); aNewDelTBX.EnableItem(BT_VARDELETE, bDelete); EnableInsert(bInsert); return 0; } IMPL_LINK( SwFldVarPage, TBClickHdl, ToolBox *, pBox ) { sal_uInt16 nTypeId = (sal_uInt16)(sal_uLong)aTypeLB.GetEntryData(GetTypeSel()); switch (pBox->GetCurItemId()) { case BT_VARDELETE: { if( nTypeId == TYP_USERFLD ) GetFldMgr().RemoveFldType(RES_USERFLD, aSelectionLB.GetSelectEntry()); else { sal_uInt16 nWhich; switch(nTypeId) { case TYP_SETFLD: case TYP_SEQFLD: nWhich = RES_SETEXPFLD; break; default: nWhich = RES_DDEFLD; break; } GetFldMgr().RemoveFldType(nWhich, aSelectionLB.GetSelectEntry()); } UpdateSubType(); SwWrtShell *pSh = GetWrtShell(); if(!pSh) pSh = ::GetActiveWrtShell(); if(pSh) { pSh->SetModified(); } } break; case BT_VARAPPLY: { String sName(aNameED.GetText()), sValue(aValueED.GetText()); SwFieldType* pType = 0; sal_uInt16 nId = 0; sal_uInt16 nNumFormatPos = aNumFormatLB.GetSelectEntryPos(); switch (nTypeId) { case TYP_USERFLD: nId = RES_USERFLD; break; case TYP_DDEFLD: nId = RES_DDEFLD; break; case TYP_SETFLD: nId = RES_SETEXPFLD;break; } pType = GetFldMgr().GetFldType(nId, sName); sal_uLong nFormat = aFormatLB.GetSelectEntryPos(); if (nFormat != LISTBOX_ENTRY_NOTFOUND) nFormat = (sal_uLong)aFormatLB.GetEntryData((sal_uInt16)nFormat); if (pType) // change { SwWrtShell *pSh = GetWrtShell(); if(!pSh) pSh = ::GetActiveWrtShell(); if(pSh) { pSh->StartAllAction(); if (nTypeId == TYP_USERFLD) { if (nNumFormatPos != LISTBOX_ENTRY_NOTFOUND) { sal_uLong nFmt = nNumFormatPos == 0 ? 0 : aNumFormatLB.GetFormat(); if (nFmt) { // Switch language to office-language because Kalkulator expects // String in office format and it should be fed into dialog like // that nFmt = SwValueField::GetSystemFormat(pSh->GetNumberFormatter(), nFmt); } ((SwUserFieldType*)pType)->SetContent(aValueED.GetText(), nFmt); ((SwUserFieldType*)pType)->SetType( nNumFormatPos == 0 ? nsSwGetSetExpType::GSE_STRING : nsSwGetSetExpType::GSE_EXPR ); } } else { if (nFormat != LISTBOX_ENTRY_NOTFOUND) { // DDE-Topics/-Items can have blanks in their names! // That's not being considered here yet. sal_uInt16 nTmpPos = sValue.SearchAndReplace( ' ', sfx2::cTokenSeperator ); sValue.SearchAndReplace( ' ', sfx2::cTokenSeperator, nTmpPos ); ((SwDDEFieldType*)pType)->SetCmd(sValue); ((SwDDEFieldType*)pType)->SetType((sal_uInt16)nFormat); } } pType->UpdateFlds(); pSh->EndAllAction(); } } else // new { if(nTypeId == TYP_USERFLD) { SwWrtShell *pSh = GetWrtShell(); if(!pSh) pSh = ::GetActiveWrtShell(); if(pSh) { SwUserFieldType aType( pSh->GetDoc(), sName ); if (nNumFormatPos != LISTBOX_ENTRY_NOTFOUND) { aType.SetType(nNumFormatPos == 0 ? nsSwGetSetExpType::GSE_STRING : nsSwGetSetExpType::GSE_EXPR); aType.SetContent( sValue, nNumFormatPos == 0 ? 0 : aNumFormatLB.GetFormat() ); aSelectionLB.InsertEntry(sName); aSelectionLB.SelectEntry(sName); GetFldMgr().InsertFldType( aType ); // Userfld new } } } else { if (nFormat != LISTBOX_ENTRY_NOTFOUND) { // DDE-Topics/-Items can have blanks in their names! // That's not being considered here yet. sal_uInt16 nTmpPos = sValue.SearchAndReplace( ' ', sfx2::cTokenSeperator ); sValue.SearchAndReplace( ' ', sfx2::cTokenSeperator, nTmpPos ); SwDDEFieldType aType(sName, sValue, (sal_uInt16)nFormat); aSelectionLB.InsertEntry(sName); aSelectionLB.SelectEntry(sName); GetFldMgr().InsertFldType(aType); // DDE-Field new } } } if (IsFldEdit()) GetFldMgr().GetCurFld(); // update FieldManager UpdateSubType(); } break; } return sal_True; } IMPL_LINK_NOARG(SwFldVarPage, ChapterHdl) { sal_Bool bEnable = aChapterLevelLB.GetSelectEntryPos() != 0; aSeparatorED.Enable(bEnable); aSeparatorFT.Enable(bEnable); SeparatorHdl(); return 0; } IMPL_LINK_NOARG(SwFldVarPage, SeparatorHdl) { sal_Bool bEnable = aSeparatorED.GetText().Len() != 0 || aChapterLevelLB.GetSelectEntryPos() == 0; EnableInsert(bEnable); return 0; } sal_Bool SwFldVarPage::FillItemSet(SfxItemSet& ) { sal_uInt16 nTypeId = (sal_uInt16)(sal_uLong)aTypeLB.GetEntryData(GetTypeSel()); String aVal(aValueED.GetText()); String aName(aNameED.GetText()); sal_uInt16 nSubType = aSelectionLB.GetSelectEntryPos(); if(nSubType == LISTBOX_ENTRY_NOTFOUND) nSubType = 0; else nSubType = (sal_uInt16)(sal_uLong)aSelectionLB.GetEntryData(nSubType); sal_uLong nFormat; if (!aNumFormatLB.IsVisible()) { nFormat = aFormatLB.GetSelectEntryPos(); if(nFormat == LISTBOX_ENTRY_NOTFOUND) nFormat = 0; else nFormat = (sal_uLong)aFormatLB.GetEntryData((sal_uInt16)nFormat); } else { nFormat = aNumFormatLB.GetFormat(); if (nFormat && nFormat != ULONG_MAX && aNumFormatLB.IsAutomaticLanguage()) { // Switch language to office language because Kalkulator expects // String in office format and it should be fed into the dialog // like that SwWrtShell *pSh = GetWrtShell(); if(!pSh) pSh = ::GetActiveWrtShell(); if(pSh) { nFormat = SwValueField::GetSystemFormat(pSh->GetNumberFormatter(), nFormat); } } } sal_Unicode cSeparator = ' '; switch (nTypeId) { case TYP_USERFLD: { nSubType = (nFormat == ULONG_MAX) ? nsSwGetSetExpType::GSE_STRING : nsSwGetSetExpType::GSE_EXPR; if (nFormat == ULONG_MAX && aNumFormatLB.GetSelectEntry().Equals(SW_RESSTR(FMT_USERVAR_CMD))) nSubType |= nsSwExtendedSubType::SUB_CMD; if (aInvisibleCB.IsChecked()) nSubType |= nsSwExtendedSubType::SUB_INVISIBLE; break; } case TYP_FORMELFLD: { nSubType = nsSwGetSetExpType::GSE_FORMULA; if (aNumFormatLB.IsVisible() && nFormat == ULONG_MAX) nSubType |= nsSwExtendedSubType::SUB_CMD; break; } case TYP_GETFLD: { nSubType &= 0xff00; if (aNumFormatLB.IsVisible() && nFormat == ULONG_MAX) nSubType |= nsSwExtendedSubType::SUB_CMD; break; } case TYP_INPUTFLD: { SwFieldType* pType = GetFldMgr().GetFldType(RES_USERFLD, aName); nSubType = static_cast< sal_uInt16 >((nSubType & 0xff00) | ((pType) ? INP_USR : INP_VAR)); break; } case TYP_SETFLD: { if (IsFldDlgHtmlMode()) { nSubType = 0x0100; nSubType = (nSubType & 0xff00) | nsSwGetSetExpType::GSE_STRING; } else nSubType = (nSubType & 0xff00) | ((nFormat == ULONG_MAX) ? nsSwGetSetExpType::GSE_STRING : nsSwGetSetExpType::GSE_EXPR); if (aInvisibleCB.IsChecked()) nSubType |= nsSwExtendedSubType::SUB_INVISIBLE; break; } case TYP_SEQFLD: { nSubType = aChapterLevelLB.GetSelectEntryPos(); if (nSubType == 0) nSubType = 0x7f; else { nSubType--; String sSeparator = rtl::OUString(aSeparatorED.GetText().GetChar(0)); cSeparator = sSeparator.Len() ? sSeparator.GetChar(0) : ' '; } break; } case TYP_GETREFPAGEFLD: if( SVX_NUM_CHAR_SPECIAL == nFormat ) aVal = aValueED.GetText(); break; } if (!IsFldEdit() || aNameED.GetSavedValue() != aNameED.GetText() || aValueED.GetSavedValue() != aValueED.GetText() || aSelectionLB.GetSavedValue() != aSelectionLB.GetSelectEntryPos() || aFormatLB.GetSavedValue() != aFormatLB.GetSelectEntryPos() || nOldFormat != aNumFormatLB.GetFormat() || aInvisibleCB.GetState() != aInvisibleCB.GetSavedValue() || aChapterLevelLB.GetSavedValue() != aChapterLevelLB.GetSelectEntryPos() || aSeparatorED.GetSavedValue() != aSeparatorED.GetText()) { InsertFld( nTypeId, nSubType, aName, aVal, nFormat, cSeparator, aNumFormatLB.IsAutomaticLanguage() ); } UpdateSubType(); return sal_False; } SfxTabPage* SwFldVarPage::Create( Window* pParent, const SfxItemSet& rAttrSet ) { return ( new SwFldVarPage( pParent, rAttrSet ) ); } sal_uInt16 SwFldVarPage::GetGroup() { return GRP_VAR; } SelectionListBox::SelectionListBox( SwFldVarPage* pDialog, const ResId& rResId ) : ListBox (pDialog, rResId), bCallAddSelection(sal_False) { } long SelectionListBox::PreNotify( NotifyEvent& rNEvt ) { long nHandled = ListBox::PreNotify( rNEvt ); if ( rNEvt.GetType() == EVENT_KEYUP ) { const KeyEvent* pKEvt = rNEvt.GetKeyEvent(); const KeyCode aKeyCode = pKEvt->GetKeyCode(); const sal_uInt16 nModifier = aKeyCode.GetModifier(); if( aKeyCode.GetCode() == KEY_SPACE && !nModifier) bCallAddSelection = sal_True; } if ( rNEvt.GetType() == EVENT_MOUSEBUTTONDOWN ) { const MouseEvent* pMEvt = rNEvt.GetMouseEvent(); if (pMEvt && (pMEvt->IsMod1() || pMEvt->IsMod2())) // Alt or Ctrl bCallAddSelection = sal_True; } return nHandled; } void SwFldVarPage::FillUserData() { String sData(rtl::OUString(USER_DATA_VERSION)); sData += ';'; sal_uInt16 nTypeSel = aTypeLB.GetSelectEntryPos(); if( LISTBOX_ENTRY_NOTFOUND == nTypeSel ) nTypeSel = USHRT_MAX; else nTypeSel = (sal_uInt16)(sal_uLong)aTypeLB.GetEntryData( nTypeSel ); sData += String::CreateFromInt32( nTypeSel ); SetUserData(sData); } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */ lfrb/opengl-vcl LibreOffice 核心代码仓库文档基金会
summaryrefslogtreecommitdiff
path: root/compilerplugins/clang/test/constparams.cxx
-31&id=672660031e4ca38205e2068b1e321268a844a68b'>Fix typos
AgeCommit message (Expand)Author
2017-11-02improve constparam lopluginNoel Grandin
2017-09-30loplugin:constparams: Ignore functions whose address is takenStephan Bergmann
2017-07-28loplugin:constparams handle constructorsNoel Grandin
Andrea Gelmini
Change-Id: I7fd04d0e09fcbf6d9f2a5ec617f23e08f7bc5fa3 Reviewed-on: https://gerrit.libreoffice.org/52697 Tested-by: Jenkins <ci@libreoffice.org> Reviewed-by: Julien Nabet <serval2412@yahoo.fr>
2018-02-19Remove now unused libgetuid.somichael.weghorn
Some scripts in which it was used have been removed (commit e1082e45361a92a31adedcc3ed0a35c704bca543) and the more reliable 'fakeroot' is now in use at all other places where libgetuid.so was previously used (s. tdf#115554). Change-Id: I638e96e5c8d671e3b145b79f33de718fe34ea514 Reviewed-on: https://gerrit.libreoffice.org/49837 Tested-by: Jenkins <ci@libreoffice.org> Reviewed-by: Michael Stahl <mstahl@redhat.com>
2018-02-15setup_native: remove {un,}install_solaris.shMichael Stahl
These scripts were never shipped to end users (the corresponding install_linux.sh was only added to the instset in LO times, see 117b3242dbdcf5c9690921f2f4cf1495df10c11e) but were used by QA and developers to install multiple Solaris builds as non-root using getuid.so. But the "archive" installation set can be used for the same purpopse and doesn't require a custom script. Change-Id: I665277bef7c5ddd58e798f5f1b1c6a97a0f3cfc5
2018-02-02setup_native: MSVC: pragma warning: make more specific, remove obsoleteMike Kaganski
Change-Id: Ie9f63d982acf368d27bb5b97728b060a80e8bd67 Reviewed-on: https://gerrit.libreoffice.org/49047 Tested-by: Jenkins <ci@libreoffice.org> Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
2018-01-23More loplugin:cstylecast on WindowsStephan Bergmann
Automatic rewrite (of loplugin:cstylecast and loplugin:unnecessaryparen) after cab0427cadddb3aaf1349c66f2fa13a4234ba4b2 "Enable loplugin:cstylecast for some more cases" and a409d32e7f6fc09e041079d6dbc3c927497adfed "More loplugin:cstylecast" Change-Id: Ib3355159dd08333e1b7a8d091caf2069cdcc7862 Reviewed-on: https://gerrit.libreoffice.org/48317 Tested-by: Jenkins <ci@libreoffice.org> Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2018-01-11another fix for DMG background for release buildsChristian Lohmaier
Change-Id: Ia3d753c6774092934e89db7775f8db4b84c3c008
2018-01-01Bump copyright year to 2018Adolfo Jayme Barrientos
Change-Id: Iabd06fbda15d2f83f6ee0cdd37b268910d380476
2017-12-08macOS installer bitmap for masterheiko tietze
Change-Id: I64f75cf6da59de1238a90cb8a07b911b07baccfb Reviewed-on: https://gerrit.libreoffice.org/46030 Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com> Tested-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
2017-10-27loplugin:includeform: setup_native (Windows)Stephan Bergmann
Change-Id: I58cae555a303a8657955ceec08065e8b440bdad4
2017-10-24Add Albanian (sq) dictionaryAron Budea
Change-Id: I18b166ae8e08b4509154c2ba035d3e9811e947ec Reviewed-on: https://gerrit.libreoffice.org/43707 Tested-by: Jenkins <ci@libreoffice.org> Reviewed-by: Andras Timar <andras.timar@collabora.com>
2017-09-29Drop check for Windows versions we don't supportMike Kaganski
Since we dropped support of Vista and below in master toward 6.0, those checks are needless. Removing the code that only worked in older versions, and streamlining the resulting code. Also, use kernel32.dll version for Windows version, instead of deprecated GetVersionEx, and inconvenient VersionHelpers. Since both GetVersion(Ex) and VersionHelpers (based on VerifyVersionInfo) are subject to manifest-based behavior since Windows 8.1, this move will hopefully result in more reliable OS version detection. Change-Id: I3edd8fc1843e64b6a65bd3a126be6a085511f13c Reviewed-on: https://gerrit.libreoffice.org/42905 Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk> Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com> Tested-by: Mike Kaganski <mike.kaganski@collabora.com>
2017-09-29Fix syntax errorsStephan Bergmann
...that are apparently accepted by MSVC, but not by clang-cl Change-Id: I2a11bdc709b9711d9d93d24dcb5957121fcf9efb
2017-09-28setup_native: use more Unicode in MSI custom actionsMike Kaganski
Change-Id: Id47ea566c9cf508116216625fe00013e8326b165 Reviewed-on: https://gerrit.libreoffice.org/42839 Tested-by: Jenkins <ci@libreoffice.org> Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
2017-09-22Windows: avoid dependence on UNICODE define; prefer W functionsMike Kaganski
Change-Id: I95b90128e93f0d88ed73601bcc5a7ca9279d4cf1 Reviewed-on: https://gerrit.libreoffice.org/42560 Tested-by: Jenkins <ci@libreoffice.org> Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
2017-09-18Use even more WIN32_LEAN_AND_MEANMike Kaganski
Change-Id: I538fe5b41156366e0e87b3a93e58a3947afd18f5 Reviewed-on: https://gerrit.libreoffice.org/42398 Tested-by: Jenkins <ci@libreoffice.org> Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
2017-09-16Use more WIN32_LEAN_AND_MEANMike Kaganski
https://msdn.microsoft.com/en-us/aa383745 Change-Id: I83528dc8e6a5e119e7aa816219d35f1ea3723b96 Reviewed-on: https://gerrit.libreoffice.org/42338 Tested-by: Jenkins <ci@libreoffice.org> Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
2017-08-31loplugin:constparams: setup_native (clang-cl)Stephan Bergmann
Change-Id: I36331a6caf560c7622f72c2fafa968522f44f5e9
2017-07-21migrate to boost::gettextCaolán McNamara
* all .ui files go from <interface> to <interface domain="MODULE"> e.g. vcl * all .src files go away and the english source strings folded into the .hrc as NC_("context", "source string") * ResMgr is dropped in favour of std::locale imbued by boost::locale::generator pointed at matching MODULE .mo files * UIConfig translations are folded into the module .mo, so e.g. UIConfig_cui goes from l10n target to normal one, so the res/lang.zips of UI files go away * translation via Translation::get(hrc-define-key, imbued-std::locale) * python can now be translated with its inbuilt gettext support (we keep the name strings.hrc there to keep finding the .hrc file uniform) so magic numbers can go away there * java and starbasic components can be translated via the pre-existing css.resource.StringResourceWithLocation mechanism * en-US res files go away, their strings are now the .hrc keys in the source code * remaining .res files are replaced by .mo files * in .res/.ui-lang-zip files, the old scheme missing translations of strings results in inserting the english original so something can be found, now the standard fallback of using the english original from the source key is used, so partial translations shrink dramatically in size * extract .hrc strings with hrcex which backs onto xgettext -C --add-comments --keyword=NC_:1c,2 --from-code=UTF-8 --no-wrap * extract .ui strings with uiex which backs onto xgettext --add-comments --no-wrap * qtz for gettext translations is generated at runtime as ascii-ified crc32 of content + "|" + msgid * [API CHANGE] remove deprecated binary .res resouce loader related uno apis com::sun::star::resource::OfficeResourceLoader com::sun::star::resource::XResourceBundleLoader com::sun::star::resource::XResourceBundle when translating strings via uno apis com.sun.star.resource.StringResourceWithLocation can continue to be used Change-Id: Ia2594a2672b7301d9c3421fdf31b6cfe7f3f8d0a
2017-07-07Add setgid call stub for LinuxTroy
Required by dpkg --build on Debian squeeze. Change-Id: I5e0e9c8f7851555a277d21aa14f9d695bad12198 Reviewed-on: https://gerrit.libreoffice.org/38765 Tested-by: Jenkins <ci@libreoffice.org> Reviewed-by: Michael Stahl <mstahl@redhat.com>