/************************************************************************* * * $RCSfile: tdate.cxx,v $ * * $Revision: 1.1.1.1 $ * * last change: $Author: hr $ $Date: 2000-09-18 17:03:06 $ * * The Contents of this file are made available subject to the terms of * either of the following licenses * * - GNU Lesser General Public License Version 2.1 * - Sun Industry Standards Source License Version 1.1 * * Sun Microsystems Inc., October, 2000 * * GNU Lesser General Public License Version 2.1 * ============================================= * Copyright 2000 by Sun Microsystems, Inc. * 901 San Antonio Road, Palo Alto, CA 94303, USA * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License version 2.1, as published by the Free Software Foundation. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * * * Sun Industry Standards Source License Version 1.1 * ================================================= * The contents of this file are subject to the Sun Industry Standards * Source License Version 1.1 (the "License"); You may not use this file * except in compliance with the License. You may obtain a copy of the * License at http://www.openoffice.org/license.html. * * Software provided under this License is provided on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, * WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS, * MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING. * See the License for the specific provisions governing your rights and * obligations concerning the Software. * * The Initial Developer of the Original Code is: Sun Microsystems, Inc. * * Copyright: 2000 by Sun Microsystems, Inc. * * All Rights Reserved. * * Contributor(s): _______________________________________ * * ************************************************************************/ #if defined( OS2 ) #include #elif defined( WNT ) #include #elif defined( WIN ) || defined( DOS ) #include #elif defined( MAC ) #include "mac_start.h" #ifndef __OSUTILS__ #include "OSUtils.h" #endif #include "mac_end.h" #else #include #endif #include #include #ifdef MACOSX extern "C" { struct tm *localtime_r(const time_t *timep, struct tm *buffer); } #endif // ======================================================================= static USHORT aDaysInMonth[12] = { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; #define MAX_DAYS 3636532 // ======================================================================= inline BOOL ImpIsLeapYear( USHORT nYear ) { return (((nYear % 4) == 0) && ((nYear % 100) != 0) || ((nYear % 400) == 0)); } // ----------------------------------------------------------------------- inline USHORT DaysInMonth( USHORT nMonth, USHORT nYear ) { if ( nMonth != 2 ) return aDaysInMonth[nMonth-1]; else { if ( ((nYear % 4) == 0) && ((nYear % 100) != 0) || ((nYear % 400) == 0) ) return aDaysInMonth[nMonth-1] + 1; else return aDaysInMonth[nMonth-1]; } } // ----------------------------------------------------------------------- static long DateToDays( USHORT nDay, USHORT nMonth, USHORT nYear ) { long nDays; nDays = ((ULONG)nYear-1) * 365; nDays += ((nYear-1) / 4) - ((nYear-1) / 100) + ((nYear-1) / 400); for( USHORT i = 1; i < nMonth; i++ ) nDays += DaysInMonth(i,nYear); nDays += nDay; return nDays; } // ----------------------------------------------------------------------- static void DaysToDate( long nDays, USHORT& rDay, USHORT& rMonth, USHORT& rYear ) { long nTempDays; long i = 0; BOOL bCalc; do { nTempDays = (long)nDays; rYear = (USHORT)((nTempDays / 365) - i); nTempDays -= ((ULONG)rYear-1) * 365; nTempDays -= ((rYear-1) / 4) - ((rYear-1) / 100) + ((rYear-1) / 400); bCalc = FALSE; if ( nTempDays < 1 ) { i++; bCalc = TRUE; } else { if ( nTempDays > 365 ) { if ( (nTempDays != 366) || !ImpIsLeapYear( rYear ) ) { i--; bCalc = TRUE; } } } } while ( bCalc ); rMonth = 1; while ( (ULONG)nTempDays > DaysInMonth( rMonth, rYear ) ) { nTempDays -= DaysInMonth( rMonth, rYear ); rMonth++; } rDay = (USHORT)nTempDays; } // ======================================================================= Date::Date() { #if defined( OS2 ) DATETIME aDateTime; DosGetDateTime( &aDateTime ); // Datum zusammenbauen nDate = ((ULONG)aDateTime.day) + (((ULONG)aDateTime.month)*100) + (((ULONG)aDateTime.year)*10000); #elif defined( WNT ) SYSTEMTIME aDateTime; GetLocalTime( &aDateTime ); // Datum zusammenbauen nDate = ((ULONG)aDateTime.wDay) + (((ULONG)aDateTime.wMonth)*100) + (((ULONG)aDateTime.wYear)*10000); #elif ( defined( WIN ) || defined( DOS )) && !defined( BLC ) _dosdate_t aDate; _dos_getdate( &aDate ); // Datum zusammenbauen nDate = ((ULONG)aDate.day) + (((ULONG)aDate.month)*100) + (((ULONG)aDate.year)*10000); #elif ( defined( WIN ) || defined( DOS )) && defined( BLC ) dosdate_t aDate; _dos_getdate( &aDate ); // Datum zusammenbauen nDate = ((ULONG)aDate.day) + (((ULONG)aDate.month)*100) + (((ULONG)aDate.year)*10000); #elif defined( MAC ) DateTimeRec dt; ::GetTime(&dt); nDate = ((ULONG)dt.day) + (((ULONG)dt.month)*100) + (((ULONG)dt.year )*10000); #else time_t nTmpTime; struct tm aTime; // Zeit ermitteln nTmpTime = time( 0 ); // Datum zusammenbauen if ( localtime_r( &nTmpTime, &aTime ) ) { nDate = ((ULONG)aTime.tm_mday) + (((ULONG)(aTime.tm_mon+1))*100) + (((ULONG)(aTime.tm_year+1900))*10000); } else nDate = 1 + 100 + (((ULONG)1900)*10000); #endif } // ----------------------------------------------------------------------- void Date::SetDay( USHORT nNewDay ) { ULONG nMonth = GetMonth(); ULONG nYear = GetYear(); nDate = ((ULONG)(nNewDay%100)) + (nMonth*100) + (nYear*10000); } // ----------------------------------------------------------------------- void Date::SetMonth( USHORT nNewMonth ) { ULONG nDay = GetDay(); ULONG nYear = GetYear(); nDate = nDay + (((ULONG)(nNewMonth%100))*100) + (nYear*10000); } // ----------------------------------------------------------------------- void Date::SetYear( USHORT nNewYear ) { ULONG nDay = GetDay(); ULONG nMonth = GetMonth(); nDate = nDay + (nMonth*100) + (((ULONG)(nNewYear%10000))*10000); } // ----------------------------------------------------------------------- DayOfWeek Date::GetDayOfWeek() const { return (DayOfWeek)((ULONG)(DateToDays( GetDay(), GetMonth(), GetYear() )-1) % 7); } // ----------------------------------------------------------------------- USHORT Date::GetDayOfYear() const { USHORT nDay = GetDay(); for( USHORT i = 1; i < GetMonth(); i++ ) nDay += ::DaysInMonth( i, GetYear() ); return nDay; } // ----------------------------------------------------------------------- USHORT Date::GetWeekOfYear( DayOfWeek eStartDay, WeekCountStart eWeekStart ) const { short nWeek; short n1WDay = (short)Date( 1, 1, GetYear() ).GetDayOfWeek(); short nDayOfYear = (short)GetDayOfYear(); // Wochentage beginnen bei 0, deshalb einen abziehen nDayOfYear--; // StartDay beruecksichtigen n1WDay = (n1WDay+(7-(short)eStartDay)) % 7; if ( eWeekStart == WEEKCOUNT_FIRSTDAY ) { nWeek = ((n1WDay+nDayOfYear)/7) + 1; // 53te-Woche nur dann, wenn wir nicht schon in der ersten // Woche des neuen Jahres liegen if ( nWeek == 54 ) nWeek = 1; else if ( nWeek == 53 ) { short nDaysInYear = (short)GetDaysInYear(); short nDaysNextYear = (short)Date( 1, 1, GetYear()+1 ).GetDayOfWeek(); nDaysNextYear = (nDaysNextYear+(7-(short)eStartDay)) % 7; if ( nDayOfYear > (nDaysInYear-nDaysNextYear-1) ) nWeek = 1; } } else if ( eWeekStart == WEEKCOUNT_FIRSTFULLWEEK ) { nWeek = ((n1WDay+nDayOfYear)/7); // Erste Woche eines Jahres entspricht der letzen Woche des // vorherigen Jahres if ( nWeek == 0 ) { Date aLastDatePrevYear( 31, 12, GetYear()-1 ); nWeek = aLastDatePrevYear.GetWeekOfYear( eStartDay, eWeekStart ); } } else // ( eWeekStart == WEEKCOUNT_FIRST4DAYWEEK ) { // x_monday - thursday if ( n1WDay < 4 ) nWeek = 1; // friday else if ( n1WDay == 4 ) nWeek = 53; // saturday else if ( n1WDay == 5 ) { // Jahr nach Schaltjahr if ( Date( 1, 1, GetYear()-1 ).IsLeapYear() ) nWeek = 53; else nWeek = 52; } // sunday else nWeek = 52; if ( (nWeek == 1) || (nDayOfYear + n1WDay > 6) ) { if ( nWeek == 1 ) nWeek += (nDayOfYear + n1WDay) / 7; else nWeek = (nDayOfYear + n1WDay) / 7; if ( nWeek == 53 ) { // naechster x_Sonntag == erster x_Sonntag im neuen Jahr // == noch gleiche Woche long nTempDays = DateToDays( GetDay(), GetMonth(), GetYear() ); nTempDays += 6 - (GetDayOfWeek()+(7-(short)eStartDay)) % 7; USHORT nDay; USHORT nMonth; USHORT nYear; DaysToDate( nTempDays, nDay, nMonth, nYear ); nWeek = Date( nDay, nMonth, nYear ).GetWeekOfYear( eStartDay, eWeekStart ); } } } return (USHORT)nWeek; } // ----------------------------------------------------------------------- USHORT Date::GetDaysInMonth() const { return DaysInMonth( GetMonth(), GetYear() ); } // ----------------------------------------------------------------------- BOOL Date::IsLeapYear() const { USHORT nYear = GetYear(); return ImpIsLeapYear( nYear ); } // ----------------------------------------------------------------------- BOOL Date::IsValid() const { USHORT nDay = GetDay(); USHORT nMonth = GetMonth(); USHORT nYear = GetYear(); if ( !nMonth || (nMonth > 12) ) return FALSE; if ( !nDay || (nDay > DaysInMonth( nMonth, nYear )) ) return FALSE; else if ( nYear <= 1582 ) { if ( nYear < 1582 ) return FALSE; else if ( nMonth < 10 ) return FALSE; else if ( (nMonth == 10) && (nDay < 15) ) return FALSE; } return TRUE; } // ----------------------------------------------------------------------- Date& Date::operator +=( long nDays ) { USHORT nDay; USHORT nMonth; USHORT nYear; long nTempDays = DateToDays( GetDay(), GetMonth(), GetYear() ); nTempDays += nDays; if ( nTempDays > MAX_DAYS ) nDate = 31 + (12*100) + (((ULONG)9999)*10000); else if ( nTempDays <= 0 ) nDate = 1 + 100; else { DaysToDate( nTempDays, nDay, nMonth, nYear ); nDate = ((ULONG)nDay) + (((ULONG)nMonth)*100) + (((ULONG)nYear)*10000); } return *this; } // ----------------------------------------------------------------------- Date& Date::operator -=( long nDays ) { USHORT nDay; USHORT nMonth; USHORT nYear; long nTempDays = DateToDays( GetDay(), GetMonth(), GetYear() ); nTempDays -= nDays; if ( nTempDays > MAX_DAYS ) nDate = 31 + (12*100) + (((ULONG)9999)*10000); else if ( nTempDays <= 0 ) nDate = 1 + 100; else { DaysToDate( nTempDays, nDay, nMonth, nYear ); nDate = ((ULONG)nDay) + (((ULONG)nMonth)*100) + (((ULONG)nYear)*10000); } return *this; } // ----------------------------------------------------------------------- Date& Date::operator ++() { USHORT nDay; USHORT nMonth; USHORT nYear; long nTempDays = DateToDays( GetDay(), GetMonth(), GetYear() ); if ( nTempDays < MAX_DAYS ) { nTempDays++; DaysToDate( nTempDays, nDay, nMonth, nYear ); nDate = ((ULONG)nDay) + (((ULONG)nMonth)*100) + (((ULONG)nYear)*10000); } return *this; } // ----------------------------------------------------------------------- Date& Date::operator --() { USHORT nDay; USHORT nMonth; USHORT nYear; long nTempDays = DateToDays( GetDay(), GetMonth(), GetYear() ); if ( nTempDays > 1 ) { nTempDays--; DaysToDate( nTempDays, nDay, nMonth, nYear ); nDate = ((ULONG)nDay) + (((ULONG)nMonth)*100) + (((ULONG)nYear)*10000); } return *this; } #ifndef MPW33 // ----------------------------------------------------------------------- Date Date::operator ++( int ) { Date aOldDate = *this; Date::operator++(); return aOldDate; } // ----------------------------------------------------------------------- Date Date::operator --( int ) { Date aOldDate = *this; Date::operator--(); return aOldDate; } #endif // ----------------------------------------------------------------------- Date operator +( const Date& rDate, long nDays ) { Date aDate( rDate ); aDate += nDays; return aDate; } // ----------------------------------------------------------------------- Date operator -( const Date& rDate, long nDays ) { Date aDate( rDate ); aDate -= nDays; return aDate; } // ----------------------------------------------------------------------- long operator -( const Date& rDate1, const Date& rDate2 ) { ULONG nTempDays1 = DateToDays( rDate1.GetDay(), rDate1.GetMonth(), rDate1.GetYear() ); ULONG nTempDays2 = DateToDays( rDate2.GetDay(), rDate2.GetMonth(), rDate2.GetYear() ); return nTempDays1 - nTempDays2; }