/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <osl/diagnose.h>
#include <tools/line.hxx>
#include <tools/helpers.hxx>
#include <comphelper/configuration.hxx>

#include <vcl/hatch.hxx>
#include <vcl/metaact.hxx>
#include <vcl/settings.hxx>
#include <vcl/virdev.hxx>

#include <drawmode.hxx>
#include <salgdi.hxx>

#include <cassert>
#include <cstdlib>
#include <memory>

#define HATCH_MAXPOINTS             1024

extern "C" {

static int HatchCmpFnc( const void* p1, const void* p2 )
{
    const tools::Long nX1 = static_cast<Point const *>(p1)->X();
    const tools::Long nX2 = static_cast<Point const *>(p2)->X();
    const tools::Long nY1 = static_cast<Point const *>(p1)->Y();
    const tools::Long nY2 = static_cast<Point const *>(p2)->Y();

    return ( nX1 > nX2 ? 1 : nX1 == nX2 ? nY1 > nY2 ? 1: nY1 == nY2 ? 0 : -1 : -1 );
}

}

void OutputDevice::DrawHatch( const tools::PolyPolygon& rPolyPoly, const Hatch& rHatch )
{
    assert(!is_double_buffered_window());

    Hatch aHatch( rHatch );
    aHatch.SetColor(vcl::drawmode::GetHatchColor(rHatch.GetColor(), GetDrawMode(), GetSettings().GetStyleSettings()));

    if( mpMetaFile )
        mpMetaFile->AddAction( new MetaHatchAction( rPolyPoly, aHatch ) );

    if( !IsDeviceOutputNecessary() || ImplIsRecordLayout() )
        return;

    if( !mpGraphics && !AcquireGraphics() )
        return;
    assert(mpGraphics);

    if( mbInitClipRegion )
        InitClipRegion();

    if( mbOutputClipped )
        return;

    if( rPolyPoly.Count() )
    {
        tools::PolyPolygon     aPolyPoly( LogicToPixel( rPolyPoly ) );
        GDIMetaFile*    pOldMetaFile = mpMetaFile;
        bool            bOldMap = mbMap;

        aPolyPoly.Optimize( PolyOptimizeFlags::NO_SAME );
        aHatch.SetDistance( ImplLogicWidthToDevicePixel( aHatch.GetDistance() ) );

        mpMetaFile = nullptr;
        EnableMapMode( false );
        Push( vcl::PushFlags::LINECOLOR );
        SetLineColor( aHatch.GetColor() );
        InitLineColor();
        DrawHatch( aPolyPoly, aHatch, false );
        Pop();
        EnableMapMode( bOldMap );
        mpMetaFile = pOldMetaFile;
    }

    if( mpAlphaVDev )
        mpAlphaVDev->DrawHatch( rPolyPoly, rHatch );
}

void OutputDevice::AddHatchActions( const tools::PolyPolygon& rPolyPoly, const Hatch& rHatch,
                                    GDIMetaFile& rMtf )
{

    tools::PolyPolygon aPolyPoly( rPolyPoly );
    aPolyPoly.Optimize( PolyOptimizeFlags::NO_SAME | PolyOptimizeFlags::CLOSE );

    if( aPolyPoly.Count() )
    {
        GDIMetaFile* pOldMtf = mpMetaFile;

        mpMetaFile = &rMtf;
        mpMetaFile->AddAction( new MetaPushAction( vcl::PushFlags::ALL ) );
        mpMetaFile->AddAction( new MetaLineColorAction( rHatch.GetColor(), true ) );
        DrawHatch( aPolyPoly, rHatch, true );
        mpMetaFile->AddAction( new MetaPopAction() );
        mpMetaFile = pOldMtf;
    }
}

static bool HasSaneNSteps(const Point& rPt1, const Point& rEndPt1, const Size& rInc)
{
    tools::Long nVertSteps = -1;
    if (rInc.Height())
    {
        bool bFail = o3tl::checked_sub(rEndPt1.Y(), rPt1.Y(), nVertSteps);
        if (bFail)
            nVertSteps = std::numeric_limits<tools::Long>::max();
        else
            nVertSteps = nVertSteps / rInc.Height();
    }
    tools::Long nHorzSteps = -1;
    if (rInc.Width())
    {
        bool bFail = o3tl::checked_sub(rEndPt1.X(), rPt1.X(), nHorzSteps);
        if (bFail)
            nHorzSteps = std::numeric_limits<tools::Long>::max();
        else
            nHorzSteps = nHorzSteps / rInc.Width();
    }
    auto nSteps = std::max(nVertSteps, nHorzSteps);
    if (nSteps > 1024)
    {
        SAL_WARN("vcl.gdi", "skipping slow hatch with " << nSteps << " steps");
        return false;
    }
    return true;
}

void OutputDevice::DrawHatch( const tools::PolyPolygon& rPolyPoly, const Hatch& rHatch, bool bMtf )
{
    assert(!is_double_buffered_window());

    if(!rPolyPoly.Count())
        return;

    // #i115630# DrawHatch does not work with beziers included in the polypolygon, take care of that
    bool bIsCurve(false);

    for(sal_uInt16 a(0); !bIsCurve && a < rPolyPoly.Count(); a++)
    {
        if(rPolyPoly[a].HasFlags())
        {
            bIsCurve = true;
        }
    }

    if(bIsCurve)
    {
        OSL_ENSURE(false, "DrawHatch does *not* support curves, falling back to AdaptiveSubdivide()...");
        tools::PolyPolygon aPolyPoly;

        rPolyPoly.AdaptiveSubdivide(aPolyPoly);
        DrawHatch(aPolyPoly, rHatch, bMtf);
    }
    else
    {
        tools::Rectangle   aRect( rPolyPoly.GetBoundRect() );
        const tools::Long  nLogPixelWidth = ImplDevicePixelToLogicWidth( 1 );
        const tools::Long  nWidth = ImplDevicePixelToLogicWidth( std::max( ImplLogicWidthToDevicePixel( rHatch.GetDistance() ), tools::Long(3) ) );
        std::unique_ptr<Point[]> pPtBuffer(new Point[ HATCH_MAXPOINTS ]);
        Point       aPt1, aPt2, aEndPt1;
        Size        aInc;

        // Single hatch
        aRect.AdjustLeft( -nLogPixelWidth ); aRect.AdjustTop( -nLogPixelWidth ); aRect.AdjustRight(nLogPixelWidth ); aRect.AdjustBottom(nLogPixelWidth );
        CalcHatchValues( aRect, nWidth, rHatch.GetAngle(), aPt1, aPt2, aInc, aEndPt1 );
        if (comphelper::IsFuzzing() && !HasSaneNSteps(aPt1, aEndPt1, aInc))
            return;

        if (aInc.Width() <= 0 && aInc.Height() <= 0)
            SAL_WARN("vcl.gdi", "invalid increment");
        else
        {
            do
            {
                DrawHatchLine( tools::Line( aPt1, aPt2 ), rPolyPoly, pPtBuffer.get(), bMtf );
                aPt1.AdjustX(aInc.Width() ); aPt1.AdjustY(aInc.Height() );
                aPt2.AdjustX(aInc.Width() ); aPt2.AdjustY(aInc.Height() );
            }
            while( ( aPt1.X() <= aEndPt1.X() ) && ( aPt1.Y() <= aEndPt1.Y() ) );
        }

        if( ( rHatch.GetStyle() == HatchStyle::Double ) || ( rHatch.GetStyle() == HatchStyle::Triple ) )
        {
            // Double hatch
            CalcHatchValues( aRect, nWidth, rHatch.GetAngle() + 900_deg10, aPt1, aPt2, aInc, aEndPt1 );
            if (comphelper::IsFuzzing() && !HasSaneNSteps(aPt1, aEndPt1, aInc))
                return;

            do
            {
                DrawHatchLine( tools::Line( aPt1, aPt2 ), rPolyPoly, pPtBuffer.get(), bMtf );
                aPt1.AdjustX(aInc.Width() ); aPt1.AdjustY(aInc.Height() );
                aPt2.AdjustX(aInc.Width() ); aPt2.AdjustY(aInc.Height() );
            }
            while( ( aPt1.X() <= aEndPt1.X() ) && ( aPt1.Y() <= aEndPt1.Y() ) );

            if( rHatch.GetStyle() == HatchStyle::Triple )
            {
                // Triple hatch
                CalcHatchValues( aRect, nWidth, rHatch.GetAngle() + 450_deg10, aPt1, aPt2, aInc, aEndPt1 );
                if (comphelper::IsFuzzing() && !HasSaneNSteps(aPt1, aEndPt1, aInc))
                    return;

                do
                {
                    DrawHatchLine( tools::Line( aPt1, aPt2 ), rPolyPoly, pPtBuffer.get(), bMtf );
                    aPt1.AdjustX(aInc.Width() ); aPt1.AdjustY(aInc.Height() );
                    aPt2.AdjustX(aInc.Width() ); aPt2.AdjustY(aInc.Height() );
                }
                while( ( aPt1.X() <= aEndPt1.X() ) && ( aPt1.Y() <= aEndPt1.Y() ) );
            }
        }
    }
}

void OutputDevice::CalcHatchValues( const tools::Rectangle& rRect, tools::Long nDist, Degree10 nAngle10,
                                    Point& rPt1, Point& rPt2, Size& rInc, Point& rEndPt1 )
{
    Point   aRef;
    Degree10    nAngle = nAngle10 % 1800_deg10;
    tools::Long    nOffset = 0;

    if( nAngle > 900_deg10 )
        nAngle -= 1800_deg10;

    aRef = ( !IsRefPoint() ? rRect.TopLeft() : GetRefPoint() );

    if( 0_deg10 == nAngle )
    {
        rInc = Size( 0, nDist );
        rPt1 = rRect.TopLeft();
        rPt2 = rRect.TopRight();
        rEndPt1 = rRect.BottomLeft();

        if( aRef.Y() <= rRect.Top() )
            nOffset = ( ( rRect.Top() - aRef.Y() ) % nDist );
        else
            nOffset = ( nDist - ( ( aRef.Y() - rRect.Top() ) % nDist ) );

        rPt1.AdjustY( -nOffset );
        rPt2.AdjustY( -nOffset );
    }
    else if( 900_deg10 == nAngle )
    {
        rInc = Size( nDist, 0 );
        rPt1 = rRect.TopLeft();
        rPt2 = rRect.BottomLeft();
        rEndPt1 = rRect.TopRight();

        if( aRef.X() <= rRect.Left() )
            nOffset = ( rRect.Left() - aRef.X() ) % nDist;
        else
            nOffset = nDist - ( ( aRef.X() - rRect.Left() ) % nDist );

        rPt1.AdjustX( -nOffset );
        rPt2.AdjustX( -nOffset );
    }
    else if( nAngle >= Degree10(-450) && nAngle <= 450_deg10 )
    {
        const double    fAngle = std::abs( toRadians(nAngle) );
        const double    fTan = tan( fAngle );
        const tools::Long      nYOff = basegfx::fround<tools::Long>( ( rRect.Right() - rRect.Left() ) * fTan );
        tools::Long            nPY;

        nDist = basegfx::fround<tools::Long>(nDist / cos(fAngle));
        rInc = Size( 0, nDist );

        if( nAngle > 0_deg10 )
        {
            rPt1 = rRect.TopLeft();
            rPt2 = Point( rRect.Right(), rRect.Top() - nYOff );
            rEndPt1 = Point( rRect.Left(), rRect.Bottom() + nYOff );
            nPY = basegfx::fround<tools::Long>(aRef.Y() - ((rPt1.X() - aRef.X()) * fTan));
        }
        else
        {
            rPt1 = rRect.TopRight();
            rPt2 = Point( rRect.Left(), rRect.Top() - nYOff );
            rEndPt1 = Point( rRect.Right(), rRect.Bottom() + nYOff );
            nPY = basegfx::fround<tools::Long>(aRef.Y() + ((rPt1.X() - aRef.X()) * fTan));
        }

        if( nPY <= rPt1.Y() )
            nOffset = ( rPt1.Y() - nPY ) % nDist;
        else
            nOffset = nDist - ( ( nPY - rPt1.Y() ) % nDist );

        rPt1.AdjustY( -nOffset );
        rPt2.AdjustY( -nOffset );
    }
    else
    {
        const double fAngle = std::abs( toRadians(nAngle) );
        const double fTan = tan( fAngle );
        const tools::Long   nXOff = basegfx::fround<tools::Long>( (static_cast<double>(rRect.Bottom()) - rRect.Top()) / fTan );
        tools::Long         nPX;

        nDist = basegfx::fround<tools::Long>(nDist / sin(fAngle));
        rInc = Size( nDist, 0 );

        if( nAngle > 0_deg10 )
        {
            rPt1 = rRect.TopLeft();
            rPt2 = Point( rRect.Left() - nXOff, rRect.Bottom() );
            rEndPt1 = Point( rRect.Right() + nXOff, rRect.Top() );
            nPX = basegfx::fround<tools::Long>( aRef.X() - ( (static_cast<double>(rPt1.Y()) - aRef.Y()) / fTan ) );
        }
        else
        {
            rPt1 = rRect.BottomLeft();
            rPt2 = Point( rRect.Left() - nXOff, rRect.Top() );
            rEndPt1 = Point( rRect.Right() + nXOff, rRect.Bottom() );
            nPX = basegfx::fround<tools::Long>( aRef.X() + ( (static_cast<double>(rPt1.Y()) - aRef.Y()) / fTan ) );
        }

        if( nPX <= rPt1.X() )
            nOffset = ( rPt1.X() - nPX ) % nDist;
        else
            nOffset = nDist - ( ( nPX - rPt1.X() ) % nDist );

        rPt1.AdjustX( -nOffset );
        rPt2.AdjustX( -nOffset );
    }
}

void OutputDevice::DrawHatchLine( const tools::Line& rLine, const tools::PolyPolygon& rPolyPoly,
                                      Point* pPtBuffer, bool bMtf )
{
    assert(!is_double_buffered_window());

    double  fX, fY;
    tools::Long    nAdd, nPCounter = 0;

    for( tools::Long nPoly = 0, nPolyCount = rPolyPoly.Count(); nPoly < nPolyCount; nPoly++ )
    {
        const tools::Polygon& rPoly = rPolyPoly[ static_cast<sal_uInt16>(nPoly) ];

        if( rPoly.GetSize() > 1 )
        {
            tools::Line aCurSegment( rPoly[ 0 ], Point() );

            for( tools::Long i = 1, nCount = rPoly.GetSize(); i <= nCount; i++ )
            {
                aCurSegment.SetEnd( rPoly[ static_cast<sal_uInt16>( i % nCount ) ] );
                nAdd = 0;

                if( rLine.Intersection( aCurSegment, fX, fY ) )
                {
                    if( ( fabs( fX - aCurSegment.GetStart().X() ) <= 0.0000001 ) &&
                        ( fabs( fY - aCurSegment.GetStart().Y() ) <= 0.0000001 ) )
                    {
                        const tools::Line aPrevSegment( rPoly[ static_cast<sal_uInt16>( ( i > 1 ) ? ( i - 2 ) : ( nCount - 1 ) ) ], aCurSegment.GetStart() );
                        const double    fPrevDistance = rLine.GetDistance( aPrevSegment.GetStart() );
                        const double    fCurDistance = rLine.GetDistance( aCurSegment.GetEnd() );

                        if( ( fPrevDistance <= 0.0 && fCurDistance > 0.0 ) ||
                            ( fPrevDistance > 0.0 && fCurDistance < 0.0 ) )
                        {
                            nAdd = 1;
                        }
                    }
                    else if( ( fabs( fX - aCurSegment.GetEnd().X() ) <= 0.0000001 ) &&
                             ( fabs( fY - aCurSegment.GetEnd().Y() ) <= 0.0000001 ) )
                    {
                        const tools::Line aNextSegment( aCurSegment.GetEnd(), rPoly[ static_cast<sal_uInt16>( ( i + 1 ) % nCount ) ] );

                        if( ( fabs( rLine.GetDistance( aNextSegment.GetEnd() ) ) <= 0.0000001 ) &&
                            ( rLine.GetDistance( aCurSegment.GetStart() ) > 0.0 ) )
                        {
                            nAdd = 1;
                        }
                    }
                    else
                        nAdd = 1;

                    if( nAdd )
                    {
                        if (nPCounter == HATCH_MAXPOINTS)
                        {
                            SAL_WARN("vcl.gdi", "too many hatch points");
                            return;
                        }
                        pPtBuffer[nPCounter++] = Point(basegfx::fround<tools::Long>(fX),
                                                       basegfx::fround<tools::Long>(fY));
                    }
                }

                aCurSegment.SetStart( aCurSegment.GetEnd() );
            }
        }
    }

    if( nPCounter <= 1 )
        return;

    qsort( pPtBuffer, nPCounter, sizeof( Point ), HatchCmpFnc );

    if( nPCounter & 1 )
        nPCounter--;

    if( bMtf )
    {
        for( tools::Long i = 0; i < nPCounter; i += 2 )
            mpMetaFile->AddAction( new MetaLineAction( pPtBuffer[ i ], pPtBuffer[ i + 1 ] ) );
    }
    else
    {
        for( tools::Long i = 0; i < nPCounter; i += 2 )
            DrawHatchLine_DrawLine(pPtBuffer[i], pPtBuffer[i+1]);
    }
}

void OutputDevice::DrawHatchLine_DrawLine(const Point& rStartPoint, const Point& rEndPoint)
{
    Point aPt1{ImplLogicToDevicePixel(rStartPoint)}, aPt2{ImplLogicToDevicePixel(rEndPoint)};
    mpGraphics->DrawLine(aPt1.X(), aPt1.Y(), aPt2.X(), aPt2.Y(), *this);
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
_intrinsics_support</option>
<option value='feature/custom-widgets'>feature/custom-widgets</option>
<option value='feature/dataprovider'>feature/dataprovider</option>
<option value='feature/debugevent'>feature/debugevent</option>
<option value='feature/dematurize01'>feature/dematurize01</option>
<option value='feature/dialog-screenshots'>feature/dialog-screenshots</option>
<option value='feature/docking_windows'>feature/docking_windows</option>
<option value='feature/docx-commentsex'>feature/docx-commentsex</option>
<option value='feature/drawinglayercore'>feature/drawinglayercore</option>
<option value='feature/drawinglayercore2'>feature/drawinglayercore2</option>
<option value='feature/droid_calcimpress3'>feature/droid_calcimpress3</option>
<option value='feature/droid_calimpress4'>feature/droid_calimpress4</option>
<option value='feature/drop-findcmap'>feature/drop-findcmap</option>
<option value='feature/editviewoverlay'>feature/editviewoverlay</option>
<option value='feature/eszka'>feature/eszka</option>
<option value='feature/extended-tooltips'>feature/extended-tooltips</option>
<option value='feature/external-data-ui'>feature/external-data-ui</option>
<option value='feature/fastparser'>feature/fastparser</option>
<option value='feature/firebird-sdbc'>feature/firebird-sdbc</option>
<option value='feature/firebird-sdbc2'>feature/firebird-sdbc2</option>
<option value='feature/firebird-sdbc3'>feature/firebird-sdbc3</option>
<option value='feature/fixstyles3'>feature/fixstyles3</option>
<option value='feature/fontsubtitutions'>feature/fontsubtitutions</option>
<option value='feature/foo'>feature/foo</option>
<option value='feature/gbuild_cli'>feature/gbuild_cli</option>
<option value='feature/gccwrapper'>feature/gccwrapper</option>
<option value='feature/glyphy'>feature/glyphy</option>
<option value='feature/go2'>feature/go2</option>
<option value='feature/gpg4libre'>feature/gpg4libre</option>
<option value='feature/gpg4libre-5-4'>feature/gpg4libre-5-4</option>
<option value='feature/gpg4libre-6-0'>feature/gpg4libre-6-0</option>
<option value='feature/gpg4libre2'>feature/gpg4libre2</option>
<option value='feature/graphicobject'>feature/graphicobject</option>
<option value='feature/gsoc-basic-ide-completion-and-other-bits'>feature/gsoc-basic-ide-completion-and-other-bits</option>
<option value='feature/gsoc-calc-enhanced-db-range'>feature/gsoc-calc-enhanced-db-range</option>
<option value='feature/gsoc-svm-writer'>feature/gsoc-svm-writer</option>
<option value='feature/gsoc-uitest-2019'>feature/gsoc-uitest-2019</option>
<option value='feature/gsoc14-colors'>feature/gsoc14-colors</option>
<option value='feature/gsoc14-draw-chained-text-boxes'>feature/gsoc14-draw-chained-text-boxes</option>
<option value='feature/gsoc14-draw-text-background-color'>feature/gsoc14-draw-text-background-color</option>
<option value='feature/gsoc14-libcmis'>feature/gsoc14-libcmis</option>
<option value='feature/gsoc14-libcmis2'>feature/gsoc14-libcmis2</option>
<option value='feature/gsoc14-personas'>feature/gsoc14-personas</option>
<option value='feature/gsoc14-personas2'>feature/gsoc14-personas2</option>
<option value='feature/gsoc15-online-update'>feature/gsoc15-online-update</option>
<option value='feature/gsoc15-open-remote-files-dialog'>feature/gsoc15-open-remote-files-dialog</option>
<option value='feature/gsoc17-revamp-customize-dialog'>feature/gsoc17-revamp-customize-dialog</option>
<option value='feature/gsoc19-chart-style'>feature/gsoc19-chart-style</option>
<option value='feature/gsoc2011_wizards'>feature/gsoc2011_wizards</option>
<option value='feature/gsoc24-lua'>feature/gsoc24-lua</option>
<option value='feature/gtk3_kde5'>feature/gtk3_kde5</option>
<option value='feature/gtk3nativedialogs'>feature/gtk3nativedialogs</option>
<option value='feature/gtktiledviewer'>feature/gtktiledviewer</option>
<option value='feature/ia2'>feature/ia2</option>
<option value='feature/ia2.2'>feature/ia2.2</option>
<option value='feature/ia2.3'>feature/ia2.3</option>
<option value='feature/ia2.4'>feature/ia2.4</option>
<option value='feature/ia2.5'>feature/ia2.5</option>
<option value='feature/improvexlsximport'>feature/improvexlsximport</option>
<option value='feature/instdirlinktargets'>feature/instdirlinktargets</option>
<option value='feature/item_refactor2'>feature/item_refactor2</option>
<option value='feature/jsdialogs'>feature/jsdialogs</option>
<option value='feature/jssidebar'>feature/jssidebar</option>
<option value='feature/lfrb-vcl-opengl'>feature/lfrb-vcl-opengl</option>
<option value='feature/libffi'>feature/libffi</option>
<option value='feature/lok-calc-rtl'>feature/lok-calc-rtl</option>
<option value='feature/lok-clipboard'>feature/lok-clipboard</option>
<option value='feature/lok_cellcursor'>feature/lok_cellcursor</option>
<option value='feature/lok_dialog'>feature/lok_dialog</option>
<option value='feature/lok_dialog-backport'>feature/lok_dialog-backport</option>
<option value='feature/lok_dialog2'>feature/lok_dialog2</option>
<option value='feature/lok_sofficemain'>feature/lok_sofficemain</option>
<option value='feature/lok_sofficemain2'>feature/lok_sofficemain2</option>
<option value='feature/mac-opengl-fixes'>feature/mac-opengl-fixes</option>
<option value='feature/macOS-weld'>feature/macOS-weld</option>
<option value='feature/mailmerge-toolbar'>feature/mailmerge-toolbar</option>
<option value='feature/mar-updater'>feature/mar-updater</option>
<option value='feature/mariadb'>feature/mariadb</option>
<option value='feature/misc-vba-rework'>feature/misc-vba-rework</option>
<option value='feature/mork'>feature/mork</option>
<option value='feature/nativealpha'>feature/nativealpha</option>
<option value='feature/notebookbar'>feature/notebookbar</option>
<option value='feature/notes-refactoring'>feature/notes-refactoring</option>
<option value='feature/ooxml-analyze'>feature/ooxml-analyze</option>
<option value='feature/opengl-canvas-rework'>feature/opengl-canvas-rework</option>
<option value='feature/opengl-transitions-rework'>feature/opengl-transitions-rework</option>
<option value='feature/opengl-vcl-text'>feature/opengl-vcl-text</option>
<option value='feature/orcus-continuous-integration'>feature/orcus-continuous-integration</option>
<option value='feature/orcus-odf'>feature/orcus-odf</option>
<option value='feature/orcus-odf-rebased'>feature/orcus-odf-rebased</option>
<option value='feature/orcus-odf-rebased2'>feature/orcus-odf-rebased2</option>
<option value='feature/orcus-rebased'>feature/orcus-rebased</option>
<option value='feature/owncloud-provider-for-android'>feature/owncloud-provider-for-android</option>
<option value='feature/pdfium-master'>feature/pdfium-master</option>
<option value='feature/perfwork4'>feature/perfwork4</option>
<option value='feature/perfwork5'>feature/perfwork5</option>
<option value='feature/pivotcharts'>feature/pivotcharts</option>
<option value='feature/print_revamp'>feature/print_revamp</option>
<option value='feature/priorities'>feature/priorities</option>
<option value='feature/profilesafemode'>feature/profilesafemode</option>
<option value='feature/propose-master-cib'>feature/propose-master-cib</option>
<option value='feature/pytable'>feature/pytable</option>
<option value='feature/pyweb-wizard'>feature/pyweb-wizard</option>
<option value='feature/qt5-win+mac'>feature/qt5-win+mac</option>
<option value='feature/refactor-god-objects'>feature/refactor-god-objects</option>
<option value='feature/rendercontext'>feature/rendercontext</option>
<option value='feature/resolve-comments'>feature/resolve-comments</option>
<option value='feature/scaling-geometry-provider'>feature/scaling-geometry-provider</option>
<option value='feature/screenshotannotation'>feature/screenshotannotation</option>
<option value='feature/sgexperiment'>feature/sgexperiment</option>
<option value='feature/skia'>feature/skia</option>
<option value='feature/slidehack'>feature/slidehack</option>
<option value='feature/slidehack2'>feature/slidehack2</option>
<option value='feature/slideshow_onlySprites'>feature/slideshow_onlySprites</option>
<option value='feature/slideshowprimitives'>feature/slideshowprimitives</option>
<option value='feature/sparklines'>feature/sparklines</option>
<option value='feature/spellig_popup_SID'>feature/spellig_popup_SID</option>
<option value='feature/stub_writer'>feature/stub_writer</option>
<option value='feature/svg-export'>feature/svg-export</option>
<option value='feature/svg-optimisations'>feature/svg-optimisations</option>
<option value='feature/svg-optimisations-5-0'>feature/svg-optimisations-5-0</option>
<option value='feature/sw-delete-undo-rework'>feature/sw-delete-undo-rework</option>
<option value='feature/sw_redlinehide_4a_for_libreoffice-6-2'>feature/sw_redlinehide_4a_for_libreoffice-6-2</option>
<option value='feature/sw_redlinehide_4b_for_libreoffice-6-2'>feature/sw_redlinehide_4b_for_libreoffice-6-2</option>
<option value='feature/table-style'>feature/table-style</option>
<option value='feature/table-style-rebased'>feature/table-style-rebased</option>
<option value='feature/table_panel'>feature/table_panel</option>
<option value='feature/table_rotated_text'>feature/table_rotated_text</option>
<option value='feature/taggedPDF'>feature/taggedPDF</option>
<option value='feature/template_manager_improvements'>feature/template_manager_improvements</option>
<option value='feature/template_manager_improvements2'>feature/template_manager_improvements2</option>
<option value='feature/themesupport'>feature/themesupport</option>
<option value='feature/themesupport2'>feature/themesupport2</option>
<option value='feature/tiled-editing'>feature/tiled-editing</option>
<option value='feature/tscp3'>feature/tscp3</option>
<option value='feature/unitver'>feature/unitver</option>
<option value='feature/unocrsrptr'>feature/unocrsrptr</option>
<option value='feature/unostyles'>feature/unostyles</option>
<option value='feature/unostyles2'>feature/unostyles2</option>
<option value='feature/unostyles3'>feature/unostyles3</option>
<option value='feature/use-ogl-context-in-canvas'>feature/use-ogl-context-in-canvas</option>
<option value='feature/vcl-opengl'>feature/vcl-opengl</option>
<option value='feature/vcl-opengl-integration'>feature/vcl-opengl-integration</option>
<option value='feature/vcl-opengl2'>feature/vcl-opengl2</option>
<option value='feature/vclptr'>feature/vclptr</option>
<option value='feature/vlc'>feature/vlc</option>
<option value='feature/vlc-rb'>feature/vlc-rb</option>
<option value='feature/vs2012'>feature/vs2012</option>
<option value='feature/wasm'>feature/wasm</option>
<option value='feature/window-iter'>feature/window-iter</option>
<option value='feature/windows-cross-build'>feature/windows-cross-build</option>
<option value='feature/windowsupdater'>feature/windowsupdater</option>
<option value='feature/xtiledrenderable'>feature/xtiledrenderable</option>
<option value='libreoffice-24-2'>libreoffice-24-2</option>
<option value='libreoffice-24-2-0'>libreoffice-24-2-0</option>
<option value='libreoffice-24-2-1'>libreoffice-24-2-1</option>
<option value='libreoffice-24-2-2'>libreoffice-24-2-2</option>
<option value='libreoffice-24-2-3'>libreoffice-24-2-3</option>
<option value='libreoffice-24-2-4'>libreoffice-24-2-4</option>
<option value='libreoffice-24-2-5'>libreoffice-24-2-5</option>
<option value='libreoffice-24-2-6'>libreoffice-24-2-6</option>
<option value='libreoffice-24-2-7'>libreoffice-24-2-7</option>
<option value='libreoffice-24-8'>libreoffice-24-8</option>
<option value='libreoffice-24-8-0'>libreoffice-24-8-0</option>
<option value='libreoffice-24-8-1'>libreoffice-24-8-1</option>
<option value='libreoffice-24-8-2'>libreoffice-24-8-2</option>
<option value='libreoffice-24-8-3'>libreoffice-24-8-3</option>
<option value='libreoffice-24-8-4'>libreoffice-24-8-4</option>
<option value='libreoffice-25-2'>libreoffice-25-2</option>
<option value='libreoffice-3-5'>libreoffice-3-5</option>
<option value='libreoffice-3-5-0'>libreoffice-3-5-0</option>
<option value='libreoffice-3-5-1'>libreoffice-3-5-1</option>
<option value='libreoffice-3-5-2'>libreoffice-3-5-2</option>
<option value='libreoffice-3-5-3'>libreoffice-3-5-3</option>
<option value='libreoffice-3-5-4'>libreoffice-3-5-4</option>
<option value='libreoffice-3-5-5'>libreoffice-3-5-5</option>
<option value='libreoffice-3-5-6'>libreoffice-3-5-6</option>
<option value='libreoffice-3-5-7'>libreoffice-3-5-7</option>
<option value='libreoffice-3-6'>libreoffice-3-6</option>
<option value='libreoffice-3-6-0'>libreoffice-3-6-0</option>
<option value='libreoffice-3-6-1'>libreoffice-3-6-1</option>
<option value='libreoffice-3-6-2'>libreoffice-3-6-2</option>
<option value='libreoffice-3-6-3'>libreoffice-3-6-3</option>
<option value='libreoffice-3-6-4'>libreoffice-3-6-4</option>
<option value='libreoffice-3-6-5'>libreoffice-3-6-5</option>
<option value='libreoffice-3-6-6'>libreoffice-3-6-6</option>
<option value='libreoffice-3-6-7'>libreoffice-3-6-7</option>
<option value='libreoffice-4-0'>libreoffice-4-0</option>
<option value='libreoffice-4-0-0'>libreoffice-4-0-0</option>
<option value='libreoffice-4-0-1'>libreoffice-4-0-1</option>
<option value='libreoffice-4-0-2'>libreoffice-4-0-2</option>
<option value='libreoffice-4-0-3'>libreoffice-4-0-3</option>
<option value='libreoffice-4-0-4'>libreoffice-4-0-4</option>
<option value='libreoffice-4-0-5'>libreoffice-4-0-5</option>
<option value='libreoffice-4-0-6'>libreoffice-4-0-6</option>
<option value='libreoffice-4-1'>libreoffice-4-1</option>
<option value='libreoffice-4-1-0'>libreoffice-4-1-0</option>
<option value='libreoffice-4-1-1'>libreoffice-4-1-1</option>
<option value='libreoffice-4-1-2'>libreoffice-4-1-2</option>
<option value='libreoffice-4-1-3'>libreoffice-4-1-3</option>
<option value='libreoffice-4-1-4'>libreoffice-4-1-4</option>
<option value='libreoffice-4-1-5'>libreoffice-4-1-5</option>
<option value='libreoffice-4-1-6'>libreoffice-4-1-6</option>
<option value='libreoffice-4-2'>libreoffice-4-2</option>
<option value='libreoffice-4-2-0'>libreoffice-4-2-0</option>
<option value='libreoffice-4-2-1'>libreoffice-4-2-1</option>
<option value='libreoffice-4-2-2'>libreoffice-4-2-2</option>
<option value='libreoffice-4-2-3'>libreoffice-4-2-3</option>
<option value='libreoffice-4-2-4'>libreoffice-4-2-4</option>
<option value='libreoffice-4-2-5'>libreoffice-4-2-5</option>
<option value='libreoffice-4-2-6'>libreoffice-4-2-6</option>
<option value='libreoffice-4-2-7'>libreoffice-4-2-7</option>
<option value='libreoffice-4-2-8'>libreoffice-4-2-8</option>
<option value='libreoffice-4-3'>libreoffice-4-3</option>
<option value='libreoffice-4-3-0'>libreoffice-4-3-0</option>
<option value='libreoffice-4-3-1'>libreoffice-4-3-1</option>
<option value='libreoffice-4-3-2'>libreoffice-4-3-2</option>
<option value='libreoffice-4-3-3'>libreoffice-4-3-3</option>
<option value='libreoffice-4-3-4'>libreoffice-4-3-4</option>
<option value='libreoffice-4-3-5'>libreoffice-4-3-5</option>
<option value='libreoffice-4-3-6'>libreoffice-4-3-6</option>
<option value='libreoffice-4-3-7'>libreoffice-4-3-7</option>
<option value='libreoffice-4-4'>libreoffice-4-4</option>
<option value='libreoffice-4-4-0'>libreoffice-4-4-0</option>
<option value='libreoffice-4-4-1'>libreoffice-4-4-1</option>
<option value='libreoffice-4-4-2'>libreoffice-4-4-2</option>
<option value='libreoffice-4-4-3'>libreoffice-4-4-3</option>
<option value='libreoffice-4-4-4'>libreoffice-4-4-4</option>
<option value='libreoffice-4-4-5'>libreoffice-4-4-5</option>
<option value='libreoffice-4-4-6'>libreoffice-4-4-6</option>
<option value='libreoffice-4-4-7'>libreoffice-4-4-7</option>
<option value='libreoffice-5-0'>libreoffice-5-0</option>
<option value='libreoffice-5-0-0'>libreoffice-5-0-0</option>
<option value='libreoffice-5-0-1'>libreoffice-5-0-1</option>
<option value='libreoffice-5-0-2'>libreoffice-5-0-2</option>
<option value='libreoffice-5-0-3'>libreoffice-5-0-3</option>
<option value='libreoffice-5-0-4'>libreoffice-5-0-4</option>
<option value='libreoffice-5-0-5'>libreoffice-5-0-5</option>
<option value='libreoffice-5-0-6'>libreoffice-5-0-6</option>
<option value='libreoffice-5-1'>libreoffice-5-1</option>
<option value='libreoffice-5-1-0'>libreoffice-5-1-0</option>
<option value='libreoffice-5-1-1'>libreoffice-5-1-1</option>
<option value='libreoffice-5-1-2'>libreoffice-5-1-2</option>
<option value='libreoffice-5-1-3'>libreoffice-5-1-3</option>
<option value='libreoffice-5-1-4'>libreoffice-5-1-4</option>
<option value='libreoffice-5-1-5'>libreoffice-5-1-5</option>
<option value='libreoffice-5-1-6'>libreoffice-5-1-6</option>
<option value='libreoffice-5-2'>libreoffice-5-2</option>
<option value='libreoffice-5-2-0'>libreoffice-5-2-0</option>
<option value='libreoffice-5-2-1'>libreoffice-5-2-1</option>
<option value='libreoffice-5-2-2'>libreoffice-5-2-2</option>
<option value='libreoffice-5-2-3'>libreoffice-5-2-3</option>
<option value='libreoffice-5-2-4'>libreoffice-5-2-4</option>
<option value='libreoffice-5-2-5'>libreoffice-5-2-5</option>
<option value='libreoffice-5-2-6'>libreoffice-5-2-6</option>
<option value='libreoffice-5-2-7'>libreoffice-5-2-7</option>
<option value='libreoffice-5-3'>libreoffice-5-3</option>
<option value='libreoffice-5-3-0'>libreoffice-5-3-0</option>
<option value='libreoffice-5-3-1'>libreoffice-5-3-1</option>
<option value='libreoffice-5-3-2'>libreoffice-5-3-2</option>
<option value='libreoffice-5-3-3'>libreoffice-5-3-3</option>
<option value='libreoffice-5-3-4'>libreoffice-5-3-4</option>
<option value='libreoffice-5-3-5'>libreoffice-5-3-5</option>
<option value='libreoffice-5-3-6'>libreoffice-5-3-6</option>
<option value='libreoffice-5-3-7'>libreoffice-5-3-7</option>
<option value='libreoffice-5-4'>libreoffice-5-4</option>
<option value='libreoffice-5-4-0'>libreoffice-5-4-0</option>
<option value='libreoffice-5-4-1'>libreoffice-5-4-1</option>
<option value='libreoffice-5-4-2'>libreoffice-5-4-2</option>
<option value='libreoffice-5-4-3'>libreoffice-5-4-3</option>
<option value='libreoffice-5-4-4'>libreoffice-5-4-4</option>
<option value='libreoffice-5-4-5'>libreoffice-5-4-5</option>
<option value='libreoffice-5-4-6'>libreoffice-5-4-6</option>
<option value='libreoffice-5-4-7'>libreoffice-5-4-7</option>
<option value='libreoffice-6-0'>libreoffice-6-0</option>
<option value='libreoffice-6-0-0'>libreoffice-6-0-0</option>
<option value='libreoffice-6-0-1'>libreoffice-6-0-1</option>
<option value='libreoffice-6-0-2'>libreoffice-6-0-2</option>
<option value='libreoffice-6-0-3'>libreoffice-6-0-3</option>
<option value='libreoffice-6-0-4'>libreoffice-6-0-4</option>
<option value='libreoffice-6-0-5'>libreoffice-6-0-5</option>
<option value='libreoffice-6-0-6'>libreoffice-6-0-6</option>
<option value='libreoffice-6-0-7'>libreoffice-6-0-7</option>
<option value='libreoffice-6-1'>libreoffice-6-1</option>
<option value='libreoffice-6-1-0'>libreoffice-6-1-0</option>
<option value='libreoffice-6-1-1'>libreoffice-6-1-1</option>
<option value='libreoffice-6-1-2'>libreoffice-6-1-2</option>
<option value='libreoffice-6-1-3'>libreoffice-6-1-3</option>
<option value='libreoffice-6-1-4'>libreoffice-6-1-4</option>
<option value='libreoffice-6-1-5'>libreoffice-6-1-5</option>
<option value='libreoffice-6-1-6'>libreoffice-6-1-6</option>
<option value='libreoffice-6-2'>libreoffice-6-2</option>
<option value='libreoffice-6-2-0'>libreoffice-6-2-0</option>
<option value='libreoffice-6-2-1'>libreoffice-6-2-1</option>
<option value='libreoffice-6-2-2'>libreoffice-6-2-2</option>
<option value='libreoffice-6-2-3'>libreoffice-6-2-3</option>
<option value='libreoffice-6-2-4'>libreoffice-6-2-4</option>
<option value='libreoffice-6-2-5'>libreoffice-6-2-5</option>
<option value='libreoffice-6-2-6'>libreoffice-6-2-6</option>
<option value='libreoffice-6-2-7'>libreoffice-6-2-7</option>
<option value='libreoffice-6-2-8'>libreoffice-6-2-8</option>
<option value='libreoffice-6-3'>libreoffice-6-3</option>
<option value='libreoffice-6-3-0'>libreoffice-6-3-0</option>
<option value='libreoffice-6-3-1'>libreoffice-6-3-1</option>
<option value='libreoffice-6-3-2'>libreoffice-6-3-2</option>
<option value='libreoffice-6-3-3'>libreoffice-6-3-3</option>
<option value='libreoffice-6-3-4'>libreoffice-6-3-4</option>
<option value='libreoffice-6-3-5'>libreoffice-6-3-5</option>
<option value='libreoffice-6-3-6'>libreoffice-6-3-6</option>
<option value='libreoffice-6-4'>libreoffice-6-4</option>
<option value='libreoffice-6-4-0'>libreoffice-6-4-0</option>
<option value='libreoffice-6-4-1'>libreoffice-6-4-1</option>
<option value='libreoffice-6-4-2'>libreoffice-6-4-2</option>
<option value='libreoffice-6-4-3'>libreoffice-6-4-3</option>
<option value='libreoffice-6-4-4'>libreoffice-6-4-4</option>
<option value='libreoffice-6-4-5'>libreoffice-6-4-5</option>
<option value='libreoffice-6-4-6'>libreoffice-6-4-6</option>
<option value='libreoffice-6-4-7'>libreoffice-6-4-7</option>
<option value='libreoffice-7-0'>libreoffice-7-0</option>
<option value='libreoffice-7-0-0'>libreoffice-7-0-0</option>
<option value='libreoffice-7-0-1'>libreoffice-7-0-1</option>
<option value='libreoffice-7-0-2'>libreoffice-7-0-2</option>
<option value='libreoffice-7-0-3'>libreoffice-7-0-3</option>
<option value='libreoffice-7-0-4'>libreoffice-7-0-4</option>
<option value='libreoffice-7-0-5'>libreoffice-7-0-5</option>
<option value='libreoffice-7-0-6'>libreoffice-7-0-6</option>
<option value='libreoffice-7-1'>libreoffice-7-1</option>
<option value='libreoffice-7-1-0'>libreoffice-7-1-0</option>
<option value='libreoffice-7-1-1'>libreoffice-7-1-1</option>
<option value='libreoffice-7-1-2'>libreoffice-7-1-2</option>
<option value='libreoffice-7-1-3'>libreoffice-7-1-3</option>
<option value='libreoffice-7-1-4'>libreoffice-7-1-4</option>
<option value='libreoffice-7-1-5'>libreoffice-7-1-5</option>
<option value='libreoffice-7-1-6'>libreoffice-7-1-6</option>
<option value='libreoffice-7-1-7'>libreoffice-7-1-7</option>
<option value='libreoffice-7-2'>libreoffice-7-2</option>
<option value='libreoffice-7-2-0'>libreoffice-7-2-0</option>
<option value='libreoffice-7-2-1'>libreoffice-7-2-1</option>
<option value='libreoffice-7-2-2'>libreoffice-7-2-2</option>
<option value='libreoffice-7-2-3'>libreoffice-7-2-3</option>
<option value='libreoffice-7-2-5'>libreoffice-7-2-5</option>
<option value='libreoffice-7-2-6'>libreoffice-7-2-6</option>
<option value='libreoffice-7-2-7'>libreoffice-7-2-7</option>
<option value='libreoffice-7-3'>libreoffice-7-3</option>
<option value='libreoffice-7-3-0'>libreoffice-7-3-0</option>
<option value='libreoffice-7-3-1'>libreoffice-7-3-1</option>
<option value='libreoffice-7-3-2'>libreoffice-7-3-2</option>
<option value='libreoffice-7-3-3'>libreoffice-7-3-3</option>
<option value='libreoffice-7-3-4'>libreoffice-7-3-4</option>
<option value='libreoffice-7-3-5'>libreoffice-7-3-5</option>
<option value='libreoffice-7-3-6'>libreoffice-7-3-6</option>
<option value='libreoffice-7-3-7'>libreoffice-7-3-7</option>
<option value='libreoffice-7-4'>libreoffice-7-4</option>
<option value='libreoffice-7-4-0'>libreoffice-7-4-0</option>
<option value='libreoffice-7-4-1'>libreoffice-7-4-1</option>
<option value='libreoffice-7-4-2'>libreoffice-7-4-2</option>
<option value='libreoffice-7-4-3'>libreoffice-7-4-3</option>
<option value='libreoffice-7-4-4'>libreoffice-7-4-4</option>
<option value='libreoffice-7-4-6'>libreoffice-7-4-6</option>
<option value='libreoffice-7-4-7'>libreoffice-7-4-7</option>
<option value='libreoffice-7-5'>libreoffice-7-5</option>
<option value='libreoffice-7-5-0'>libreoffice-7-5-0</option>
<option value='libreoffice-7-5-1'>libreoffice-7-5-1</option>
<option value='libreoffice-7-5-2'>libreoffice-7-5-2</option>
<option value='libreoffice-7-5-3'>libreoffice-7-5-3</option>
<option value='libreoffice-7-5-4'>libreoffice-7-5-4</option>
<option value='libreoffice-7-5-5'>libreoffice-7-5-5</option>
<option value='libreoffice-7-5-6'>libreoffice-7-5-6</option>
<option value='libreoffice-7-5-7'>libreoffice-7-5-7</option>
<option value='libreoffice-7-5-8'>libreoffice-7-5-8</option>
<option value='libreoffice-7-5-9'>libreoffice-7-5-9</option>
<option value='libreoffice-7-6'>libreoffice-7-6</option>
<option value='libreoffice-7-6-0'>libreoffice-7-6-0</option>
<option value='libreoffice-7-6-1'>libreoffice-7-6-1</option>
<option value='libreoffice-7-6-2'>libreoffice-7-6-2</option>
<option value='libreoffice-7-6-3'>libreoffice-7-6-3</option>
<option value='libreoffice-7-6-4'>libreoffice-7-6-4</option>
<option value='libreoffice-7-6-5'>libreoffice-7-6-5</option>
<option value='libreoffice-7-6-6'>libreoffice-7-6-6</option>
<option value='libreoffice-7-6-7'>libreoffice-7-6-7</option>
<option value='master' selected='selected'>master</option>
<option value='ports/macosx10.5/master'>ports/macosx10.5/master</option>
<option value='private/Ashod/cd-5.3-3.2_import_unloaded'>private/Ashod/cd-5.3-3.2_import_unloaded</option>
<option value='private/Ashod/cd-5.3-3.2_import_unloaded_share_GfxLink'>private/Ashod/cd-5.3-3.2_import_unloaded_share_GfxLink</option>
<option value='private/Ashod/cd-5.3.3.2'>private/Ashod/cd-5.3.3.2</option>
<option value='private/Ashod/cp-5.0-preinit'>private/Ashod/cp-5.0-preinit</option>
<option value='private/Ashod/fast-calc-rendering'>private/Ashod/fast-calc-rendering</option>
<option value='private/Ashod/pdfium'>private/Ashod/pdfium</option>
<option value='private/Ashod/pdfium_on_master'>private/Ashod/pdfium_on_master</option>
<option value='private/Ashod/pdfium_on_master_fixed'>private/Ashod/pdfium_on_master_fixed</option>
<option value='private/EL-SHREIF/ui_logger'>private/EL-SHREIF/ui_logger</option>
<option value='private/Minion3665/swf-export'>private/Minion3665/swf-export</option>
<option value='private/Rosemary/change-tracking'>private/Rosemary/change-tracking</option>
<option value='private/Sweetshark/killswclient'>private/Sweetshark/killswclient</option>
<option value='private/Sweetshark/lessdepend'>private/Sweetshark/lessdepend</option>
<option value='private/Sweetshark/multilistenerfix'>private/Sweetshark/multilistenerfix</option>
<option value='private/ajrhunt/c4'>private/ajrhunt/c4</option>
<option value='private/ajrhunt/cunit'>private/ajrhunt/cunit</option>
<option value='private/ajrhunt/cunitdemo'>private/ajrhunt/cunitdemo</option>
<option value='private/ajrhunt/firebird-improvement'>private/ajrhunt/firebird-improvement</option>
<option value='private/bansan/chardraw'>private/bansan/chardraw</option>
<option value='private/bubli/textboxchaining'>private/bubli/textboxchaining</option>
<option value='private/hcvcastro/preinit'>private/hcvcastro/preinit</option>
<option value='private/hcvcastro/undo-row-comment'>private/hcvcastro/undo-row-comment</option>
<option value='private/jmux/armin-strip-before-squash'>private/jmux/armin-strip-before-squash</option>
<option value='private/jmux/broken-static-win'>private/jmux/broken-static-win</option>
<option value='private/jmux/current-reorga'>private/jmux/current-reorga</option>
<option value='private/jmux/meson'>private/jmux/meson</option>
<option value='private/jmux/meson-gsoc-2021'>private/jmux/meson-gsoc-2021</option>
<option value='private/jmux/oss-fuzz'>private/jmux/oss-fuzz</option>
<option value='private/jmux/oss-fuzz-wip'>private/jmux/oss-fuzz-wip</option>
<option value='private/jmux/scheduler-fixes'>private/jmux/scheduler-fixes</option>
<option value='private/jmux/shape.odt'>private/jmux/shape.odt</option>
<option value='private/jmux/wasm-for-master'>private/jmux/wasm-for-master</option>
<option value='private/jmux/wasm-tmp'>private/jmux/wasm-tmp</option>
<option value='private/jmux/wasm_for_master_catchall'>private/jmux/wasm_for_master_catchall</option>
<option value='private/jmux/win-arm64'>private/jmux/win-arm64</option>
<option value='private/jmux/win-test-nohang'>private/jmux/win-test-nohang</option>
<option value='private/juergen/Tests'>private/juergen/Tests</option>
<option value='private/juergen/check-cjk'>private/juergen/check-cjk</option>
<option value='private/kendy/condformat-api'>private/kendy/condformat-api</option>
<option value='private/kendy/condformat-fdo82014'>private/kendy/condformat-fdo82014</option>
<option value='private/kendy/mailmerge-04'>private/kendy/mailmerge-04</option>
<option value='private/kendy/mailmerge-05'>private/kendy/mailmerge-05</option>
<option value='private/kendy/swinterpreter'>private/kendy/swinterpreter</option>
<option value='private/kendy/testcl'>private/kendy/testcl</option>
<option value='private/khaledhosny/color-fonts'>private/khaledhosny/color-fonts</option>
<option value='private/khaledhosny/vcl-cleanup-font'>private/khaledhosny/vcl-cleanup-font</option>
<option value='private/kohei/chart-bugs'>private/kohei/chart-bugs</option>
<option value='private/kohei/find-replace-all-perf'>private/kohei/find-replace-all-perf</option>
<option value='private/kohei/headless-perf'>private/kohei/headless-perf</option>
<option value='private/kohei/if-or-not-if-jump'>private/kohei/if-or-not-if-jump</option>
<option value='private/kohei/sort-ref-update'>private/kohei/sort-ref-update</option>
<option value='private/lfrb/opengl-vcl'>private/lfrb/opengl-vcl</option>
<option value='private/lgodard/calc_notes_import_export'>private/lgodard/calc_notes_import_export</option>
<option value='private/lgodard/tdf#117202'>private/lgodard/tdf#117202</option>
<option value='private/llunak/mailmerge'>private/llunak/mailmerge</option>
<option value='private/llunak/mailmerge_01'>private/llunak/mailmerge_01</option>
<option value='private/llunak/mailmerge_02'>private/llunak/mailmerge_02</option>
<option value='private/llunak/mailmerge_03'>private/llunak/mailmerge_03</option>
<option value='private/llunak/munich_12587'>private/llunak/munich_12587</option>
<option value='private/llunak/skia'>private/llunak/skia</option>
<option value='private/lmamane/basetest'>private/lmamane/basetest</option>
<option value='private/lmamane/for-julien2412'>private/lmamane/for-julien2412</option>
<option value='private/lmamane/for-julien2412-master'>private/lmamane/for-julien2412-master</option>
<option value='private/lmamane/tdf110997'>private/lmamane/tdf110997</option>
<option value='private/lmamane/timedate-controls-nanosecond'>private/lmamane/timedate-controls-nanosecond</option>
<option value='private/lmamane/validation'>private/lmamane/validation</option>
<option value='private/mcecchetti/23H1/a11y/paragraph'>private/mcecchetti/23H1/a11y/paragraph</option>
<option value='private/mcecchetti/accessibility/paragraph'>private/mcecchetti/accessibility/paragraph</option>
<option value='private/mcecchetti/amd/pdf-export-jpeg'>private/mcecchetti/amd/pdf-export-jpeg</option>
<option value='private/mcecchetti/bitmapcrc64'>private/mcecchetti/bitmapcrc64</option>
<option value='private/mcecchetti/bitmapcrc64-5-0'>private/mcecchetti/bitmapcrc64-5-0</option>
<option value='private/mcecchetti/calc-perf-unit-test'>private/mcecchetti/calc-perf-unit-test</option>
<option value='private/mcecchetti/calc-unit-test'>private/mcecchetti/calc-unit-test</option>
<option value='private/mcecchetti/gl-program-binary'>private/mcecchetti/gl-program-binary</option>
<option value='private/mert/wip_deepl'>private/mert/wip_deepl</option>
<option value='private/mikekaganski/multicolumn'>private/mikekaganski/multicolumn</option>
<option value='private/mmeeks/aafixes44'>private/mmeeks/aafixes44</option>
<option value='private/mmeeks/backports'>private/mmeeks/backports</option>
<option value='private/mmeeks/binarydatacache'>private/mmeeks/binarydatacache</option>
<option value='private/mmeeks/bitmapcrc64'>private/mmeeks/bitmapcrc64</option>
<option value='private/mmeeks/copy-paste'>private/mmeeks/copy-paste</option>
<option value='private/mmeeks/copypaste'>private/mmeeks/copypaste</option>
<option value='private/mmeeks/cp-6.2-bits'>private/mmeeks/cp-6.2-bits</option>
<option value='private/mmeeks/cp64merge'>private/mmeeks/cp64merge</option>
<option value='private/mmeeks/currency-dropdown'>private/mmeeks/currency-dropdown</option>
<option value='private/mmeeks/foo'>private/mmeeks/foo</option>
<option value='private/mmeeks/formula-iterator'>private/mmeeks/formula-iterator</option>
<option value='private/mmeeks/gldebug'>private/mmeeks/gldebug</option>
<option value='private/mmeeks/hidpi-bits'>private/mmeeks/hidpi-bits</option>
<option value='private/mmeeks/icontest'>private/mmeeks/icontest</option>
<option value='private/mmeeks/opengl-backbuffer'>private/mmeeks/opengl-backbuffer</option>
<option value='private/mmeeks/opengl-backbuffer2'>private/mmeeks/opengl-backbuffer2</option>
<option value='private/mmeeks/sandbox'>private/mmeeks/sandbox</option>
<option value='private/mmeeks/swapdatacontainer'>private/mmeeks/swapdatacontainer</option>
<option value='private/mmeeks/vcl-opengl3'>private/mmeeks/vcl-opengl3</option>
<option value='private/moggi/fix-opengl-context-problems'>private/moggi/fix-opengl-context-problems</option>
<option value='private/moggi/improved-dxf-xls-export'>private/moggi/improved-dxf-xls-export</option>
<option value='private/moggi/opengl-4-4-build-test'>private/moggi/opengl-4-4-build-test</option>
<option value='private/moggi/opengl-preparation'>private/moggi/opengl-preparation</option>
<option value='private/moggi/opengl-vcl-win'>private/moggi/opengl-vcl-win</option>
<option value='private/moggi/orcus-improvements'>private/moggi/orcus-improvements</option>
<option value='private/moggi/track-win-dc'>private/moggi/track-win-dc</option>
<option value='private/moggi/ui-test'>private/moggi/ui-test</option>
<option value='private/moggi/vcl-opengl3'>private/moggi/vcl-opengl3</option>
<option value='private/mst/sw_fieldmarkhide'>private/mst/sw_fieldmarkhide</option>
<option value='private/mst/sw_redlinehide'>private/mst/sw_redlinehide</option>
<option value='private/mst/sw_redlinehide_2'>private/mst/sw_redlinehide_2</option>
<option value='private/mst/sw_redlinehide_3'>private/mst/sw_redlinehide_3</option>
<option value='private/mst/sw_redlinehide_4a'>private/mst/sw_redlinehide_4a</option>
<option value='private/mst/sw_redlinehide_4b'>private/mst/sw_redlinehide_4b</option>
<option value='private/pranavk/modernize_gtktiledviewer'>private/pranavk/modernize_gtktiledviewer</option>
<option value='private/quwex/gsoc-box2d-experimental'>private/quwex/gsoc-box2d-experimental</option>
<option value='private/quwex/notespane-search'>private/quwex/notespane-search</option>
<option value='private/quwex/notespaneflat'>private/quwex/notespaneflat</option>
<option value='private/quwex/notespanesquashed'>private/quwex/notespanesquashed</option>
<option value='private/quwex/tdf59323'>private/quwex/tdf59323</option>
<option value='private/s.mehrbrodt/colorpicker-backport'>private/s.mehrbrodt/colorpicker-backport</option>
<option value='private/sweetshark/swdepend'>private/sweetshark/swdepend</option>
<option value='private/tbsdy/clipping'>private/tbsdy/clipping</option>
<option value='private/tbsdy/drawserverfontlayout'>private/tbsdy/drawserverfontlayout</option>
<option value='private/tbsdy/emf'>private/tbsdy/emf</option>
<option value='private/tbsdy/osl_getAllEnvironment'>private/tbsdy/osl_getAllEnvironment</option>
<option value='private/tbsdy/outdev'>private/tbsdy/outdev</option>
<option value='private/tbsdy/printinfomgr'>private/tbsdy/printinfomgr</option>
<option value='private/tbsdy/workbench'>private/tbsdy/workbench</option>
<option value='private/thb/libo-6-1+backports'>private/thb/libo-6-1+backports</option>
<option value='private/thb/libreoffice-5-2+backports'>private/thb/libreoffice-5-2+backports</option>
<option value='private/thb/sw_redlinehide-6-1'>private/thb/sw_redlinehide-6-1</option>
<option value='private/thb/tdf149754'>private/thb/tdf149754</option>
<option value='private/thb/wasm-upstreaming'>private/thb/wasm-upstreaming</option>
<option value='private/timar/cp-6.2-centos7'>private/timar/cp-6.2-centos7</option>
<option value='private/timar/fontconfigcrash'>private/timar/fontconfigcrash</option>
<option value='private/timar/pythonupgrademsp'>private/timar/pythonupgrademsp</option>
<option value='private/tml/Use-the-iOS-French-and-Italian-dictionaries-for-othe'>private/tml/Use-the-iOS-French-and-Italian-dictionaries-for-othe</option>
<option value='private/tml/android-use-bionic-linker-copy'>private/tml/android-use-bionic-linker-copy</option>
<option value='private/tml/android-use-faulty.lib'>private/tml/android-use-faulty.lib</option>
<option value='private/tml/cp-6-4-28-1'>private/tml/cp-6-4-28-1</option>
<option value='private/tml/fixwintext'>private/tml/fixwintext</option>
<option value='private/tml/iculess'>private/tml/iculess</option>
<option value='private/tml/lov-6.1.5.2'>private/tml/lov-6.1.5.2</option>
<option value='private/tml/lov-6.2.1'>private/tml/lov-6.2.1</option>
<option value='private/tml/lov-7.0.3.3'>private/tml/lov-7.0.3.3</option>
<option value='private/tml/lov-7.0.4'>private/tml/lov-7.0.4</option>
<option value='private/tml/lov-7.1.2'>private/tml/lov-7.1.2</option>
<option value='private/tml/opencl-default-1'>private/tml/opencl-default-1</option>
<option value='private/tvajngerl/staging'>private/tvajngerl/staging</option>
<option value='ref/for/distro/collabora/cp-6.2'>ref/for/distro/collabora/cp-6.2</option>
</select> <input type='submit' value='switch'/></form></td></tr>
<tr><td class='sub'>LibreOffice 核心代码仓库</td><td class='sub right'>文档基金会</td></tr></table>
<table class='tabs'><tr><td>
<a href='/cgit/lo/core/'>summary</a><a href='/cgit/lo/core/refs/?id=8c8e4ae16472a1a234b02144bb075dc179dfd6df'>refs</a><a class='active' href='/cgit/lo/core/log/.gitignore'>log</a><a href='/cgit/lo/core/tree/.gitignore?id=8c8e4ae16472a1a234b02144bb075dc179dfd6df'>tree</a><a href='/cgit/lo/core/commit/.gitignore?id=8c8e4ae16472a1a234b02144bb075dc179dfd6df'>commit</a><a href='/cgit/lo/core/diff/.gitignore?id=8c8e4ae16472a1a234b02144bb075dc179dfd6df'>diff</a></td><td class='form'><form class='right' method='get' action='/cgit/lo/core/log/.gitignore'>
<input type='hidden' name='id' value='8c8e4ae16472a1a234b02144bb075dc179dfd6df'/><select name='qt'>
<option value='grep'>log msg</option>
<option value='author'>author</option>
<option value='committer'>committer</option>
<option value='range'>range</option>
</select>
<input class='txt' type='search' size='10' name='q' value=''/>
<input type='submit' value='search'/>
</form>
</td></tr></table>
<div class='path'>path: <a href='/cgit/lo/core/log/?id=8c8e4ae16472a1a234b02144bb075dc179dfd6df'>root</a>/<a href='/cgit/lo/core/log/.gitignore?id=8c8e4ae16472a1a234b02144bb075dc179dfd6df'>.gitignore</a></div><div class='content'><table class='list nowrap'><tr class='nohover'><th class='left'>Age</th><th class='left'>Commit message (<a href='/cgit/lo/core/log/.gitignore?id=8c8e4ae16472a1a234b02144bb075dc179dfd6df&amp;showmsg=1'>Expand</a>)</th><th class='left'>Author</th></tr>
<tr><td><span title='2023-02-12 21:37:18 +0000'>2023-02-12</span></td><td><a href='/cgit/lo/core/commit/.gitignore?id=1af3cb6cf2f635e1d5431942a787d52a2ec3fa70'>.gitignore: /.vscode*</a><span class='decoration'></span></td><td>buldi</td></tr>