/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#define RID_COMMON_START 500
#define RID_DB_COMMON_START 1000
// db wizards
#define RID_DB_FORM_WIZARD_START 2200
#define RID_DB_QUERY_WIZARD_START 2300
#define RID_DB_REPORT_WIZARD_START 2400
#define RID_DB_TABLE_WIZARD_START 2600
#define RID_LETTERWIZARDDIALOG_START 3000
#define RID_LETTERWIZARDGREETING_START 3080
#define RID_LETTERWIZARDSALUTATION_START 3090
#define RID_LETTERWIZARDROADMAP_START 3100
#define RID_FAXWIZARDDIALOG_START 3200
#define RID_FAXWIZARDCOMMUNICATION_START 3270
#define RID_FAXWIZARDGREETING_START 3280
#define RID_FAXWIZARDSALUTATION_START 3290
#define RID_FAXWIZARDROADMAP_START 3300
// agenda wizard
#define RID_AGENDAWIZARDDIALOG_START 5000
String RID_COMMON_START + 0
{
Text [ en-US ] = "The directory '%1' could not be created.
There may not be enough space left on your hard disk.";
};
String RID_COMMON_START + 1
{
Text [ en-US] = "The text document could not be created.
Please check if the module 'PRODUCTNAME Writer' is installed.";
};
String RID_COMMON_START + 2
{
Text [ en-US] = "The spreadsheet could not be created.
Please check if the module 'PRODUCTNAME Calc' is installed.";
};
String RID_COMMON_START + 3
{
Text [ en-US] = "The presentation could not be created.
Please check if the module 'PRODUCTNAME Impress' is installed.";
};
String RID_COMMON_START + 4
{
Text [ en-US] = "The drawing could not be created.
Please check if the module 'PRODUCTNAME Draw' is installed.";
};
String RID_COMMON_START + 5
{
Text [ en-US] = "The formula could not be created.
Please check if the module 'PRODUCTNAME Math' is installed.";
};
String RID_COMMON_START + 6
{
Text [ en-US] = "The files required could not be found.
Please start the %PRODUCTNAME Setup and choose 'Repair'.";
};
String RID_COMMON_START + 7
{
Text [ en-US] = "The file '' already exists.
Would you like to overwrite the existing file?";
};
String RID_COMMON_START + 8
{
Text [ en-US] = "Yes";
};
String RID_COMMON_START + 9
{
Text [ en-US] = "Yes to All";
};
String RID_COMMON_START + 10
{
Text [ en-US] = "No";
};
String RID_COMMON_START + 11
{
Text [ en-US] = "Cancel";
};
String RID_COMMON_START + 12
{
Text [ en-US] = "~Finish";
};
String RID_COMMON_START + 13
{
Text [ en-US] = "< ~Back";
};
String RID_COMMON_START + 14
{
Text [ en-US] = "~Next >";
};
String RID_COMMON_START + 15
{
Text [ en-US ] = "~Help";
};
String RID_COMMON_START + 16
{
Text [ en-US] = "Steps";
};
String RID_COMMON_START + 17
{
Text [ en-US] = "Close";
};
String RID_COMMON_START + 18
{
Text [ en-US] = "OK";
};
String RID_COMMON_START + 19
{
Text [ en-US] = "The file already exists. Do you want to overwrite it?";
};
String RID_COMMON_START + 20
{
Text [ en-US] = "Template created via on .";
};
String RID_COMMON_START + 21
{
Text [ en-US] = "The wizard could not be run, because important files were not found.\nUnder 'Tools - Options - %PRODUCTNAME - Paths' click the 'Default' button to reset the paths to the original default settings.\nThen run the wizard again.";
};
// end of common section
String RID_DB_COMMON_START + 0
{
Text [ en-US] = "C~reate";
};
String RID_DB_COMMON_START + 1
{
Text [ en-US] = "~Cancel";
};
String RID_DB_COMMON_START + 2
{
Text [ en-US] = "<< ~Back";
};
String RID_DB_COMMON_START + 3
{
Text [ en-US] = "~Next >>";
};
String RID_DB_COMMON_START + 4
{
Text [ en-US] = "~Database";
};
String RID_DB_COMMON_START + 5
{
Text [ en-US] = "~Table name";
};
String RID_DB_COMMON_START + 6
{
Text [ en-US] = "An error occurred while running the wizard. The wizard will be terminated.";
};
String RID_DB_COMMON_START + 14
{
Text [ en-US ] = "No connection to the database could be established.";
};
String RID_DB_COMMON_START + 20
{
Text [ en-US ] = "~Help";
};
String RID_DB_COMMON_START + 21
{
Text [ en-US ] = "~Stop";
};
String RID_DB_COMMON_START + 30
{
Text[ en-US ] = "The document could not be saved.";
};
String RID_DB_COMMON_START + 33
{
Text[ en-US ] = "Exiting the wizard";
};
String RID_DB_COMMON_START + 34
{
Text[ en-US ] = "Connecting to data source...";
};
String RID_DB_COMMON_START + 35
{
Text[ en-US ] = "The connection to the data source could not be established.";
};
String RID_DB_COMMON_START + 36
{
Text[ en-US ] = "The file path entered is not valid.";
};
String RID_DB_COMMON_START + 37
{
Text[ en-US ] = "Please select a data source";
};
String RID_DB_COMMON_START + 38
{
Text[ en-US ] = "Please select a table or query";
};
String RID_DB_COMMON_START + 39
{
Text[ en-US ] = "Add field";
};
String RID_DB_COMMON_START + 40
{
Text[ en-US ] = "Remove field";
};
String RID_DB_COMMON_START + 41
{
Text[ en-US ] = "Add all fields";
};
String RID_DB_COMMON_START + 42
{
Text[ en-US ] = "Remove all fields";
};
String RID_DB_COMMON_START + 43
{
Text[ en-US ] = "Move field up";
};
String RID_DB_COMMON_START + 44
{
Text[ en-US ] = "Move field down";
};
String RID_DB_COMMON_START + 45
{
Text [ en-US] = "The field names from '%NAME' could not be retrieved.";
};
// Form Wizard
String RID_DB_FORM_WIZARD_START + 0
{
Text [ en-US ] = "Form Wizard";
};
String RID_DB_FORM_WIZARD_START + 1
{
Text [ en-US ] = "Fields in ~the form";
};
String RID_DB_FORM_WIZARD_START + 2
{
Text [ en-US ] = "Binary fields are always listed and selectable from the left list.\nIf possible, they are interpreted as images.";
};
String RID_DB_FORM_WIZARD_START + 3
{
Text [ en-US ] = "A subform is a form that is inserted in another form.\nUse subforms to show data from tables or queries with a one-to-many relationship.";
};
String RID_DB_FORM_WIZARD_START + 4
{
Text [ en-US ] = "~Add Subform";
};
String RID_DB_FORM_WIZARD_START + 5
{
Text [ en-US ] = "~Subform based on existing relation";
};
String RID_DB_FORM_WIZARD_START + 6
{
Text [ en-US ] = "Tables or queries";
};
String RID_DB_FORM_WIZARD_START + 7
{
Text [ en-US ] = "Subform based on ~manual selection of fields";
};
String RID_DB_FORM_WIZARD_START + 8
{
Text [ en-US ] = "~Which relation do you want to add?";
};
String RID_DB_FORM_WIZARD_START + 9
{
Text [ en-US ] = "Fields in the ~subform";
};
String RID_DB_FORM_WIZARD_START + 12
{
Text [ en-US ] = "~Available fields";
};
String RID_DB_FORM_WIZARD_START + 13
{
Text [ en-US ] = "Fields in form";
};
String RID_DB_FORM_WIZARD_START + 19
{
Text [ en-US ] = "The join '' and '' has been selected twice.\nBut joins may only be used once.";
};
String RID_DB_FORM_WIZARD_START + 20
{
Text [ en-US ] = "~First joined subform field";
};
String RID_DB_FORM_WIZARD_START + 21
{
Text [ en-US ] = "~Second joined subform field";
};
String RID_DB_FORM_WIZARD_START + 22
{
Text [ en-US ] = "~Third joined subform field";
};
String RID_DB_FORM_WIZARD_START + 23
{
Text [ en-US ] = "~Fourth joined subform field";
};
String RID_DB_FORM_WIZARD_START + 24
{
Text [ en-US ] = "F~irst joined main form field";
};
String RID_DB_FORM_WIZARD_START + 25
{
Text [ en-US ] = "S~econd joined main form field";
};
String RID_DB_FORM_WIZARD_START + 26
{
Text [ en-US ] = "T~hird joined main form field";
};
String RID_DB_FORM_WIZARD_START + 27
{
Text [ en-US ] = "F~ourth joined main form field";
};
String RID_DB_FORM_WIZARD_START + 28
{
Text [ en-US ] = "Field border";
};
String RID_DB_FORM_WIZARD_START + 29
{
Text [ en-US ] = "No border";
};
String RID_DB_FORM_WIZARD_START + 30
{
Text [ en-US ] = "3D look";
};
String RID_DB_FORM_WIZARD_START + 31
{
Text [ en-US ] = "Flat";
};
String RID_DB_FORM_WIZARD_START + 32
{
Text [ en-US ] = "Label placement";
};
String RID_DB_FORM_WIZARD_START + 33
{
Text [ en-US ] = "Align left";
};
String RID_DB_FORM_WIZARD_START + 34
{
Text [ en-US ] = "Align right";
};
String RID_DB_FORM_WIZARD_START + 35
{
Text [ en-US ] = "Arrangement of DB fields";
};
String RID_DB_FORM_WIZARD_START + 36
{
Text [ en-US ] = "Columnar - Labels Left";
};
String RID_DB_FORM_WIZARD_START + 37
{
Text [ en-US ] = "Columnar - Labels on Top";
};
String RID_DB_FORM_WIZARD_START + 38
{
Text [ en-US ] = "In Blocks - Labels Left";
};
String RID_DB_FORM_WIZARD_START + 39
{
Text [ en-US ] = "In Blocks - Labels Above";
};
String RID_DB_FORM_WIZARD_START + 40
{
Text [ en-US ] = "As Data Sheet";
};
String RID_DB_FORM_WIZARD_START + 41
{
Text [ en-US ] = "Arrangement of the main form";
};
String RID_DB_FORM_WIZARD_START + 42
{
Text [ en-US ] = "Arrangement of the subform";
};
String RID_DB_FORM_WIZARD_START + 44
{
Text [ en-US ] = "The form is to be ~used for entering new data only.";
};
String RID_DB_FORM_WIZARD_START + 45
{
Text [ en-US ] = "Existing data will not be displayed ";
};
String RID_DB_FORM_WIZARD_START + 46
{
Text [ en-US ] = "T~he form is to display all data";
};
String RID_DB_FORM_WIZARD_START + 47
{
Text [ en-US ] = "Do not allow ~modification of existing data";
};
String RID_DB_FORM_WIZARD_START + 48
{
Text [ en-US ] = "Do not allow ~deletion of existing data";
};
String RID_DB_FORM_WIZARD_START + 49
{
Text [ en-US ] = "Do not allow ~addition of new data";
};
String RID_DB_FORM_WIZARD_START + 50
{
Text [ en-US ] = "Name of ~the form";
};
String RID_DB_FORM_WIZARD_START + 51
{
Text [ en-US ] = "How do you want to proceed after creating the form?";
};
String RID_DB_FORM_WIZARD_START + 52
{
Text [ en-US ] = "~Work with the form";
};
String RID_DB_FORM_WIZARD_START + 53
{
Text [ en-US ] = "~Modify the form";
};
String RID_DB_FORM_WIZARD_START + 55
{
Text [ en-US ] = "~Page Styles";
};
String RID_DB_FORM_WIZARD_START + 80
{
Text [ en-US ] = "Field selection";
};
String RID_DB_FORM_WIZARD_START + 81
{
Text [ en-US ] = "Set up a subform";
};
String RID_DB_FORM_WIZARD_START + 82
{
Text [ en-US ] = "Add subform fields";
};
String RID_DB_FORM_WIZARD_START + 83
{
Text [ en-US ] = "Get joined fields";
};
String RID_DB_FORM_WIZARD_START + 84
{
Text [ en-US ] = "Arrange controls";
};
String RID_DB_FORM_WIZARD_START + 85
{
Text [ en-US ] = "Set data entry";
};
String RID_DB_FORM_WIZARD_START + 86
{
Text [ en-US ] = "Apply styles";
};
String RID_DB_FORM_WIZARD_START + 87
{
Text [ en-US ] = "Set name";
};
String RID_DB_FORM_WIZARD_START + 88
{
Text [ en-US ] = "(Date)";
};
String RID_DB_FORM_WIZARD_START + 89
{
Text [ en-US ] = "(Time)";
};
String RID_DB_FORM_WIZARD_START + 90
{
Text [ en-US ] = "Select the fields of your form";
};
String RID_DB_FORM_WIZARD_START + 91
{
Text [ en-US ] = "Decide if you want to set up a subform";
};
String RID_DB_FORM_WIZARD_START + 92
{
Text [ en-US ] = "Select the fields of your subform";
};
String RID_DB_FORM_WIZARD_START + 93
{
Text [ en-US ] = "Select the joins between your forms";
};
String RID_DB_FORM_WIZARD_START + 94
{
Text [ en-US ] = "Arrange the controls on your form";
};
String RID_DB_FORM_WIZARD_START + 95
{
Text [ en-US ] = "Select the data entry mode";
};
String RID_DB_FORM_WIZARD_START + 96
{
Text [ en-US ] = "Apply the style of your form";
};
String RID_DB_FORM_WIZARD_START + 97
{
Text [ en-US ] = "Set the name of the form";
};
String RID_DB_FORM_WIZARD_START + 98
{
Text [ en-US ] = "A form with the name '%FORMNAME' already exists.\nChoose another name.";
};
String RID_DB_QUERY_WIZARD_START + 0
{
Text [ en-US ] = "Query Wizard";
};
String RID_DB_QUERY_WIZARD_START + 1
{
Text [ en-US] = "Query";
};
String RID_DB_QUERY_WIZARD_START + 2
{
Text [ en-US] = "Query Wizard";
};
String RID_DB_QUERY_WIZARD_START + 3
{
Text [ en-US] = "~Tables";
};
String RID_DB_QUERY_WIZARD_START + 4
{
Text [ en-US] = "A~vailable fields";
};
String RID_DB_QUERY_WIZARD_START + 5
{
Text [ en-US] = "Name ~of the query";
};
String RID_DB_QUERY_WIZARD_START + 6
{
Text [ en-US] = "Display ~Query";
};
String RID_DB_QUERY_WIZARD_START + 7
{
Text [ en-US] = "~Modify Query";
};
String RID_DB_QUERY_WIZARD_START + 8
{
Text [ en-US] = "~How do you want to proceed after creating the query?";
};
String RID_DB_QUERY_WIZARD_START + 9
{
Text [ en-US] = "Match ~all of the following";
};
String RID_DB_QUERY_WIZARD_START + 10
{
Text [ en-US] = "~Match any of the following";
};
String RID_DB_QUERY_WIZARD_START + 11
{
Text [ en-US] = "~Detailed query (Shows all records of the query.)";
};
String RID_DB_QUERY_WIZARD_START + 12
{
Text [ en-US] = "~Summary query (Shows only results of aggregate functions.)";
};
String RID_DB_QUERY_WIZARD_START + 16
{
Text [ en-US] = "Aggregate functions";
};
String RID_DB_QUERY_WIZARD_START + 17
{
Text [ en-US] = "Fields";
};
String RID_DB_QUERY_WIZARD_START + 18
{
Text [ en-US] = "~Group by";
};
String RID_DB_QUERY_WIZARD_START + 19
{
Text [ en-US] = "Field";
};
String RID_DB_QUERY_WIZARD_START + 20
{
Text [ en-US] = "Alias";
};
String RID_DB_QUERY_WIZARD_START + 21
{
Text [ en-US] = "Table: ";
};
String RID_DB_QUERY_WIZARD_START + 22
{
Text [ en-US] = "Query: ";
};
String RID_DB_QUERY_WIZARD_START + 24
{
Text [ en-US] = "Condition";
};
String RID_DB_QUERY_WIZARD_START + 25
{
Text [ en-US] = "Value";
};
// don't change anything to the next 10 values
// they are list elements and need to be as follows
String RID_DB_QUERY_WIZARD_START + 26
{
Text [ en-US] = "is equal to";
};
String RID_DB_QUERY_WIZARD_START + 27
{
Text [ en-US] = "is not equal to";
};
String RID_DB_QUERY_WIZARD_START + 28
{
Text [ en-US] = "is smaller than";
};
String RID_DB_QUERY_WIZARD_START + 29
{
Text [ en-US] = "is greater than";
};
String RID_DB_QUERY_WIZARD_START + 30
{
Text [ en-US] = "is equal or less than ";
};
String RID_DB_QUERY_WIZARD_START + 31
{
Text [ en-US] = "is equal or greater than";
};
String RID_DB_QUERY_WIZARD_START + 32
{
Text [ en-US] = "like";
};
String RID_DB_QUERY_WIZARD_START + 33
{
Text [ en-US] = "not like";
};
String RID_DB_QUERY_WIZARD_START + 34
{
Text [ en-US] = "is null";
};
String RID_DB_QUERY_WIZARD_START + 35
{
Text [ en-US] = "is not null";
};
String RID_DB_QUERY_WIZARD_START + 36
{
Text [ en-US] = "true";
};
String RID_DB_QUERY_WIZARD_START + 37
{
Text [ en-US] = "false";
};
String RID_DB_QUERY_WIZARD_START + 38
{
Text [ en-US] = "and";
};
String RID_DB_QUERY_WIZARD_START + 39
{
Text [ en-US] = "or";
};
String RID_DB_QUERY_WIZARD_START + 40
{
Text [ en-US] = "get the sum of";
};
String RID_DB_QUERY_WIZARD_START + 41
{
Text [ en-US] = "get the average of";
};
String RID_DB_QUERY_WIZARD_START + 42
{
Text [ en-US] = "get the minimum of";
};
String RID_DB_QUERY_WIZARD_START + 43
{
Text [ en-US] = "get the maximum of";
};
String RID_DB_QUERY_WIZARD_START + 44
{
Text [ en-US] = "get the count of";
};
String RID_DB_QUERY_WIZARD_START + 48
{
Text [ en-US] = "(none)";
};
String RID_DB_QUERY_WIZARD_START + 50
{
Text [ en-US] = "Fie~lds in the Query: ";
};
String RID_DB_QUERY_WIZARD_START + 51
{
Text [ en-US] = "Sorting order: ";
};
String RID_DB_QUERY_WIZARD_START + 52
{
Text [ en-US] = "No sorting fields were assigned.";
};
String RID_DB_QUERY_WIZARD_START + 53
{
Text [ en-US] = "Search conditions: ";
};
String RID_DB_QUERY_WIZARD_START + 54
{
Text [ en-US] = "No conditions were assigned.";
};
String RID_DB_QUERY_WIZARD_START + 55
{
Text [ en-US] = "Aggregate functions: ";
};
String RID_DB_QUERY_WIZARD_START + 56
{
Text [ en-US] = "No aggregate functions were assigned.";
};
String RID_DB_QUERY_WIZARD_START + 57
{
Text [ en-US] = "Grouped by: ";
};
String RID_DB_QUERY_WIZARD_START + 58
{
Text [ en-US] = "No Groups were assigned.";
};
String RID_DB_QUERY_WIZARD_START + 59
{
Text [ en-US ] = "Grouping conditions: ";
};
String RID_DB_QUERY_WIZARD_START + 60
{
Text [ en-US] = "No grouping conditions were assigned.";
};
String RID_DB_QUERY_WIZARD_START + 70
{
Text [ en-US] = "Select the fields (columns) for your query";
};
String RID_DB_QUERY_WIZARD_START + 71
{
Text [ en-US] = "Select the sorting order";
};
String RID_DB_QUERY_WIZARD_START + 72
{
Text [ en-US] = "Select the search conditions";
};
String RID_DB_QUERY_WIZARD_START + 73
{
Text [ en-US] = "Select the type of query";
};
String RID_DB_QUERY_WIZARD_START + 74
{
Text [ en-US] = "Select the groups";
};
String RID_DB_QUERY_WIZARD_START + 75
{
Text [ en-US] = "Select the grouping conditions";
};
String RID_DB_QUERY_WIZARD_START + 76
{
Text [ en-US] = "Assign aliases if desired";
};
String RID_DB_QUERY_WIZARD_START + 77
{
Text [ en-US] = "Check the overview and decide how to proceed";
};
String RID_DB_QUERY_WIZARD_START + 80
{
Text [ en-US] = "Field selection";
};
String RID_DB_QUERY_WIZARD_START + 81
{
Text [ en-US] = "Sorting order";
};
String RID_DB_QUERY_WIZARD_START + 82
{
Text [ en-US] = "Search conditions";
};
String RID_DB_QUERY_WIZARD_START + 83
{
Text [ en-US] = "Detail or summary";
};
String RID_DB_QUERY_WIZARD_START + 84
{
Text [ en-US] = "Grouping";
};
String RID_DB_QUERY_WIZARD_START + 85
{
Text [ en-US] = "Grouping conditions";
};
String RID_DB_QUERY_WIZARD_START + 86
{
Text [ en-US] = "Aliases";
};
String RID_DB_QUERY_WIZARD_START + 87
{
Text [ en-US] = "Overview";
};
String RID_DB_QUERY_WIZARD_START + 88
{
Text [ en-US] = "A field that has not been assigned an aggregate function must be used in a group.";
};
String RID_DB_QUERY_WIZARD_START + 89
{
Text [ en-US] = "The condition ' ' was chosen twice. Each condition can only be chosen once";
};
String RID_DB_QUERY_WIZARD_START + 90
{
Text [ en-US] = "The aggregate function has been assigned twice to the fieldname ''.";
};
String RID_DB_QUERY_WIZARD_START + 91
{
Text [ en-US] = ", ";
};
String RID_DB_QUERY_WIZARD_START + 92
{
Text [ en-US] = " ()";
};
String RID_DB_QUERY_WIZARD_START + 93
{
Text [ en-US] = " ()";
};
String RID_DB_QUERY_WIZARD_START + 94
{
Text [ en-US] = " ";
};
String RID_DB_QUERY_WIZARD_START + 95
{
Text [ en-US] = " ";
};
String RID_DB_QUERY_WIZARD_START + 96
{
Text [ en-US] = " ";
};
String RID_DB_REPORT_WIZARD_START + 0
{
Text [ en-US ] = "Report Wizard";
};
String RID_DB_REPORT_WIZARD_START + 3
{
Text [ en-US ] = "~Table";
};
String RID_DB_REPORT_WIZARD_START + 4
{
Text [ en-US ] = "Colu~mns";
};
String RID_DB_REPORT_WIZARD_START + 7
{
Text [ en-US ] = "Report_";
};
String RID_DB_REPORT_WIZARD_START + 8
{
Text [ en-US ] = "- undefined -";
};
String RID_DB_REPORT_WIZARD_START + 9
{
Text [ en-US ] = "~Fields in report";
};
String RID_DB_REPORT_WIZARD_START + 11
{
Text [ en-US ] = "Grouping";
};
String RID_DB_REPORT_WIZARD_START + 12
{
Text [ en-US ] = "Sort options";
};
String RID_DB_REPORT_WIZARD_START + 13
{
Text [ en-US ] = "Choose layout";
};
String RID_DB_REPORT_WIZARD_START + 14
{
Text [ en-US ] = "Create report";
};
String RID_DB_REPORT_WIZARD_START + 15
{
Text [ en-US ] = "Layout of data";
};
String RID_DB_REPORT_WIZARD_START + 16
{
Text [ en-US ] = "Layout of headers and footers";
};
String RID_DB_REPORT_WIZARD_START + 19
{
Text [ en-US ] = "Fields";
};
String RID_DB_REPORT_WIZARD_START + 20
{
Text [ en-US ] = "~Sort by";
};
String RID_DB_REPORT_WIZARD_START + 21
{
Text [ en-US ] = "T~hen by";
};
String RID_DB_REPORT_WIZARD_START + 22
{
Text [ en-US ] = "Orientation";
};
String RID_DB_REPORT_WIZARD_START + 23
{
Text [ en-US ] = "Portrait";
};
String RID_DB_REPORT_WIZARD_START + 24
{
Text [ en-US ] = "Landscape";
};
String RID_DB_REPORT_WIZARD_START + 28
{
Text [ en-US ] = "Which fields do you want to have in your report?";
};
String RID_DB_REPORT_WIZARD_START + 29
{
Text [ en-US ] = "Do you want to add grouping levels?";
};
String RID_DB_REPORT_WIZARD_START + 30
{
Text [ en-US ] = "According to which fields do you want to sort the data?";
};
String RID_DB_REPORT_WIZARD_START + 31
{
Text [ en-US ] = "How do you want your report to look?";
};
String RID_DB_REPORT_WIZARD_START + 32
{
Text [ en-US ] = "Decide how you want to proceed";
};
String RID_DB_REPORT_WIZARD_START + 33
{
Text [ en-US ] = "Title of report";
};
String RID_DB_REPORT_WIZARD_START + 34
{
Text [ en-US ] = "Display report";
};
String RID_DB_REPORT_WIZARD_START + 35
{
Text [ en-US ] = "Create report";
};
String RID_DB_REPORT_WIZARD_START + 36
{
Text [ en-US ] = "Ascending";
};
String RID_DB_REPORT_WIZARD_START + 37
{
Text [ en-US ] = "Descending";
};
String RID_DB_REPORT_WIZARD_START + 40
{
Text [ en-US ] = "~Dynamic report";
};
String RID_DB_REPORT_WIZARD_START + 41
{
Text [ en-US ] = "~Create report now";
};
String RID_DB_REPORT_WIZARD_START + 42
{
Text [ en-US ] = "~Modify report layout";
};
String RID_DB_REPORT_WIZARD_START + 43
{
Text [ en-US ] = "Static report";
};
String RID_DB_REPORT_WIZARD_START + 44
{
Text [ en-US ] = "Save as";
};
String RID_DB_REPORT_WIZARD_START + 50
{
Text [ en-US ] = "Groupings";
};
String RID_DB_REPORT_WIZARD_START + 51
{
Text [ en-US ] = "Then b~y";
};
String RID_DB_REPORT_WIZARD_START + 52
{
Text [ en-US ] = "~Then by";
};
String RID_DB_REPORT_WIZARD_START + 53
{
Text [ en-US ] = "Asc~ending";
};
String RID_DB_REPORT_WIZARD_START + 54
{
Text [ en-US ] = "Ascend~ing";
};
String RID_DB_REPORT_WIZARD_START + 55
{
Text [ en-US ] = "Ascendin~g";
};
String RID_DB_REPORT_WIZARD_START + 56
{
Text [ en-US ] = "De~scending";
};
String RID_DB_REPORT_WIZARD_START + 57
{
Text [ en-US ] = "Des~cending";
};
String RID_DB_REPORT_WIZARD_START + 58
{
Text [ en-US ] = "De~scending";
};
String RID_DB_REPORT_WIZARD_START + 60
{
Text [ en-US ] = "Binary fields cannot be displayed in the report.";
};
String RID_DB_REPORT_WIZARD_START + 61
{
Text [ en-US ] = "The table '' does not exist.";
};
String RID_DB_REPORT_WIZARD_START + 62
{
Text [ en-US ] = "Creating Report...";
};
String RID_DB_REPORT_WIZARD_START + 63
{
Text [ en-US ] = "Number of records inserted: ";
};
String RID_DB_REPORT_WIZARD_START + 64
{
Text [ en-US ] = "The form '' does not exist.";
};
String RID_DB_REPORT_WIZARD_START + 65
{
Text [ en-US ] = "The query with the statement
''
could not be run.
Check your data source.";
};
String RID_DB_REPORT_WIZARD_START + 66
{
Text [ en-US ] = "The following hidden control in the form '' could not be read: ''.";
};
String RID_DB_REPORT_WIZARD_START + 67
{
Text [ en-US ] = "Importing data...";
};
String RID_DB_REPORT_WIZARD_START + 68
{
Text [ en-US ] = "Labeling fields";
};
String RID_DB_REPORT_WIZARD_START + 69
{
Text [ en-US ] = "How do you want to label the fields?";
};
String RID_DB_REPORT_WIZARD_START + 70
{
Text [ en-US ] = "Label";
};
String RID_DB_REPORT_WIZARD_START + 71
{
Text [ en-US ] = "Field";
};
String RID_DB_REPORT_WIZARD_START + 72
{
Text [ en-US ] = "An error occurred in the wizard.
The template '%PATH' could be erroneous.
Either the required sections or tables do not exist or exist under the wrong name.
See the Help for more detailed information.
Please select another template.";
};
String RID_DB_REPORT_WIZARD_START + 73
{
Text [ en-US ] = "There is an invalid user field in a table.";
};
String RID_DB_REPORT_WIZARD_START + 74
{
Text [ en-US ] = "The sort criterion '' was chosen twice. Each criterion can only be chosen once.";
};
String RID_DB_REPORT_WIZARD_START + 75
{
Text [ en-US ] = "Note: The dummy text will be replaced by data from the database when the report is created.";
};
String RID_DB_REPORT_WIZARD_START + 76
{
Text [ en-US ] = "A report '%REPORTNAME' already exists in the database. Please assign another name.";
};
String RID_DB_REPORT_WIZARD_START + 78
{
Text [ en-US ] = "How do you want to proceed after creating the report?";
};
String RID_DB_REPORT_WIZARD_START + 79
{
Text [ en-US ] = "What kind of report do you want to create?";
};
String RID_DB_REPORT_WIZARD_START + 80
{
Text [ en-US ] = "Tabular";
};
String RID_DB_REPORT_WIZARD_START + 81
{
Text [ en-US ] = "Columnar, single-column";
};
String RID_DB_REPORT_WIZARD_START + 82
{
Text [ en-US ] = "Columnar, two columns";
};
String RID_DB_REPORT_WIZARD_START + 83
{
Text [ en-US ] = "Columnar, three columns";
};
String RID_DB_REPORT_WIZARD_START + 84
{
Text [ en-US ] = "In blocks, labels left";
};
String RID_DB_REPORT_WIZARD_START + 85
{
Text [ en-US ] = "In blocks, labels above";
};
String RID_DB_REPORT_WIZARD_START + 86
{
Text [ en-US ] = "Title:";
};
String RID_DB_REPORT_WIZARD_START + 87
{
Text [ en-US ] = "Author:";
};
String RID_DB_REPORT_WIZARD_START + 88
{
Text [ en-US ] = "Date:";
};
String RID_DB_REPORT_WIZARD_START + 89
{
Text [ en-US ] = "Page #page# of #count#";
Text [ x-comment ] = "Please don't translate the words #page# and #count#, these are placeholders.";
};
String RID_DB_REPORT_WIZARD_START + 90
{
Text [ en-US ] = "Page number:";
};
String RID_DB_REPORT_WIZARD_START + 91
{
Text [ en-US ] = "Page count:";
};
String RID_DB_REPORT_WIZARD_START + 92
{
Text [ en-US ] = "No valid report template was found.";
};
String RID_DB_REPORT_WIZARD_START + 93
{
Text [ en-US ] = "Page:";
};
String RID_DB_REPORT_WIZARD_START + 94
{
Text [ en-US ] = "Align Left - Border";
};
String RID_DB_REPORT_WIZARD_START + 95
{
Text [ en-US ] = "Align Left - Compact";
};
String RID_DB_REPORT_WIZARD_START + 96
{
Text [ en-US ] = "Align Left - Elegant";
};
String RID_DB_REPORT_WIZARD_START + 97
{
Text [ en-US ] = "Align Left - Highlighted";
};
String RID_DB_REPORT_WIZARD_START + 98
{
Text [ en-US ] = "Align Left - Modern";
};
String RID_DB_REPORT_WIZARD_START + 99
{
Text [ en-US ] = "Align Left - Red & Blue";
};
String RID_DB_REPORT_WIZARD_START + 100
{
Text [ en-US ] = "Default";
};
String RID_DB_REPORT_WIZARD_START + 101
{
Text [ en-US ] = "Outline - Borders";
};
String RID_DB_REPORT_WIZARD_START + 102
{
Text [ en-US ] = "Outline - Compact";
};
String RID_DB_REPORT_WIZARD_START + 103
{
Text [ en-US ] = "Outline - Elegant";
};
String RID_DB_REPORT_WIZARD_START + 104
{
Text [ en-US ] = "Outline - Highlighted";
};
String RID_DB_REPORT_WIZARD_START + 105
{
Text [ en-US ] = "Outline - Modern";
};
String RID_DB_REPORT_WIZARD_START + 106
{
Text [ en-US ] = "Outline - Red & Blue";
};
String RID_DB_REPORT_WIZARD_START + 107
{
Text [ en-US ] = "Outline, indented - Borders";
};
String RID_DB_REPORT_WIZARD_START + 108
{
Text [ en-US ] = "Outline, indented - Compact";
};
String RID_DB_REPORT_WIZARD_START + 109
{
Text [ en-US ] = "Outline, indented - Elegant";
};
String RID_DB_REPORT_WIZARD_START + 110
{
Text [ en-US ] = "Outline, indented - Highlighted";
};
String RID_DB_REPORT_WIZARD_START + 111
{
Text [ en-US ] = "Outline, indented - Modern";
};
String RID_DB_REPORT_WIZARD_START + 112
{
Text [ en-US ] = "Outline, indented - Red & Blue";
};
String RID_DB_REPORT_WIZARD_START + 113
{
Text [ en-US ] = "Bubbles";
};
String RID_DB_REPORT_WIZARD_START + 114
{
Text [ en-US ] = "Cinema";
};
String RID_DB_REPORT_WIZARD_START + 115
{
Text [ en-US ] = "Controlling";
};
String RID_DB_REPORT_WIZARD_START + 116
{
Text [ en-US ] = "Default";
};
String RID_DB_REPORT_WIZARD_START + 117
{
Text [ en-US ] = "Drafting";
};
String RID_DB_REPORT_WIZARD_START + 118
{
Text [ en-US ] = "Finances";
};
String RID_DB_REPORT_WIZARD_START + 119
{
Text [ en-US ] = "Flipchart";
};
String RID_DB_REPORT_WIZARD_START + 120
{
Text [ en-US ] = "Formal with Company Logo";
};
String RID_DB_REPORT_WIZARD_START + 121
{
Text [ en-US ] = "Generic";
};
String RID_DB_REPORT_WIZARD_START + 122
{
Text [ en-US ] = "Worldmap";
};
String RID_DB_TABLE_WIZARD_START + 1
{
Text [ en-US] = "Table Wizard";
};
String RID_DB_TABLE_WIZARD_START + 2
{
Text [ en-US] = "Select fields";
};
String RID_DB_TABLE_WIZARD_START + 3
{
Text [ en-US] = "Set types and formats";
};
String RID_DB_TABLE_WIZARD_START + 4
{
Text [ en-US] = "Set primary key";
};
String RID_DB_TABLE_WIZARD_START + 5
{
Text [ en-US] = "Create table";
};
String RID_DB_TABLE_WIZARD_START + 8
{
Text [ en-US] = "Select fields for your table";
};
String RID_DB_TABLE_WIZARD_START + 9
{
Text [ en-US] = "Set field types and formats";
};
String RID_DB_TABLE_WIZARD_START + 10
{
Text [ en-US] = "Set primary key";
};
String RID_DB_TABLE_WIZARD_START + 11
{
Text [ en-US] = "Create table";
};
String RID_DB_TABLE_WIZARD_START + 14
{
Text [ en-US] = "This wizard helps you to create a table for your database. After selecting a table category and a sample table, choose the fields you want to include in your table. You can include fields from more than one sample table.";
};
String RID_DB_TABLE_WIZARD_START + 15
{
Text [ en-US] = "Ca~tegory";
};
String RID_DB_TABLE_WIZARD_START + 16
{
Text [ en-US] = "B~usiness";
};
String RID_DB_TABLE_WIZARD_START + 17
{
Text [ en-US] = "P~ersonal";
};
String RID_DB_TABLE_WIZARD_START + 18
{
Text [ en-US] = "~Sample tables";
};
String RID_DB_TABLE_WIZARD_START + 19
{
Text [ en-US] = "A~vailable fields";
};
String RID_DB_TABLE_WIZARD_START + 20
{
Text [ en-US] = "Field information";
};
String RID_DB_TABLE_WIZARD_START + 21
{
Text [ en-US] = "+";
};
String RID_DB_TABLE_WIZARD_START + 22
{
Text [ en-US] = "-";
};
String RID_DB_TABLE_WIZARD_START + 23
{
Text [ en-US] = "Field name";
};
String RID_DB_TABLE_WIZARD_START + 24
{
Text [ en-US] = "Field type";
};
String RID_DB_TABLE_WIZARD_START + 25
{
Text [ en-US] = "~Selected fields";
};
String RID_DB_TABLE_WIZARD_START + 26
{
Text [ en-US] = "A primary key uniquely identifies each record in a database table. Primary keys ease the linking of information in separate tables, and it is recommended that you have a primary key in every table. Without a primary key, it will not be possible to enter data into this table.";
};
String RID_DB_TABLE_WIZARD_START + 27
{
Text [ en-US] = "~Create a primary key";
};
String RID_DB_TABLE_WIZARD_START + 28
{
Text [ en-US] = "~Automatically add a primary key";
};
String RID_DB_TABLE_WIZARD_START + 29
{
Text [ en-US] = "~Use an existing field as a primary key";
};
String RID_DB_TABLE_WIZARD_START + 30
{
Text [ en-US] = "Define p~rimary key as a combination of several fields ";
};
String RID_DB_TABLE_WIZARD_START + 31
{
Text [ en-US] = "F~ieldname";
};
String RID_DB_TABLE_WIZARD_START + 32
{
Text [ en-US] = "~Primary key fields";
};
String RID_DB_TABLE_WIZARD_START + 33
{
Text [ en-US] = "Auto ~value";
};
String RID_DB_TABLE_WIZARD_START + 34
{
Text [ en-US] = "What do you want to name your table?";
};
String RID_DB_TABLE_WIZARD_START + 35
{
Text [ en-US] = "Congratulations. You have entered all the information needed to create your table.";
};
String RID_DB_TABLE_WIZARD_START + 36
{
Text [ en-US] = "What do you want to do next?";
};
String RID_DB_TABLE_WIZARD_START + 37
{
Text [ en-US] = "Modify the table design";
};
String RID_DB_TABLE_WIZARD_START + 38
{
Text [ en-US] = "Insert data immediately";
};
String RID_DB_TABLE_WIZARD_START + 39
{
Text [ en-US] = "C~reate a form based on this table";
};
String RID_DB_TABLE_WIZARD_START + 40
{
Text [ en-US] = "The table you have created could not be opened.";
};
String RID_DB_TABLE_WIZARD_START + 41
{
Text [ en-US] = "The table name '%TABLENAME' contains a character ('%SPECIALCHAR') that might not be supported by the database.";
};
String RID_DB_TABLE_WIZARD_START + 42
{
Text [ en-US] = "The field name '%FIELDNAME' contains a special character ('%SPECIALCHAR') that might not be supported by the database.";
};
String RID_DB_TABLE_WIZARD_START + 43
{
Text [ en-US] = "Field";
};
String RID_DB_TABLE_WIZARD_START + 44
{
Text [ en-US] = "MyTable";
};
String RID_DB_TABLE_WIZARD_START + 45
{
Text [ en-US] = "Add a Field";
};
String RID_DB_TABLE_WIZARD_START + 46
{
Text [ en-US] = "Remove the selected Field";
};
String RID_DB_TABLE_WIZARD_START + 47
{
Text [ en-US] = "The field cannot be inserted because this would exceed the maximum number of %COUNT possible fields in the database table";
};
String RID_DB_TABLE_WIZARD_START + 48
{
Text [ en-US] = "The name '%TABLENAME' already exists.\nPlease enter another name.";
};
String RID_DB_TABLE_WIZARD_START + 49
{
Text [ en-US] = "Catalog of the table";
};
String RID_DB_TABLE_WIZARD_START + 50
{
Text [ en-US] = "Schema of the table";
};
String RID_DB_TABLE_WIZARD_START + 51
{
Text [ en-US] = "The field '%FIELDNAME' already exists.";
};
// LETTER WIZARD RESOURCES
String RID_LETTERWIZARDDIALOG_START + 1
{
Text [ en-US] = "Letter Wizard";
};
String RID_LETTERWIZARDDIALOG_START + 2
{
Text [ en-US] = "Label9";
};
String RID_LETTERWIZARDDIALOG_START + 3
{
Text [ en-US] = "~Business letter";
};
String RID_LETTERWIZARDDIALOG_START + 4
{
Text [ en-US] = "~Formal personal letter";
};
String RID_LETTERWIZARDDIALOG_START + 5
{
Text [ en-US] = "~Personal letter";
};
String RID_LETTERWIZARDDIALOG_START + 6
{
Text [ en-US] = "~Use letterhead paper with pre-printed elements";
};
String RID_LETTERWIZARDDIALOG_START + 7
{
Text [ en-US] = "~Logo";
};
String RID_LETTERWIZARDDIALOG_START + 8
{
Text [ en-US] = "Return address";
};
String RID_LETTERWIZARDDIALOG_START + 9
{
Text [ en-US] = "~Include footer";
};
String RID_LETTERWIZARDDIALOG_START + 10
{
Text [ en-US] = "~Return address in envelope window";
};
String RID_LETTERWIZARDDIALOG_START + 11
{
Text [ en-US] = "~Logo";
};
String RID_LETTERWIZARDDIALOG_START + 12
{
Text [ en-US] = "~Return address in envelope window";
};
String RID_LETTERWIZARDDIALOG_START + 13
{
Text [ en-US] = "Letter Signs";
};
String RID_LETTERWIZARDDIALOG_START + 14
{
Text [ en-US] = "S~ubject line";
};
String RID_LETTERWIZARDDIALOG_START + 15
{
Text [ en-US] = "Salu~tation";
};
String RID_LETTERWIZARDDIALOG_START + 16
{
Text [ en-US] = "Fold ~marks";
};
String RID_LETTERWIZARDDIALOG_START + 17
{
Text [ en-US] = "~Complimentary close";
};
String RID_LETTERWIZARDDIALOG_START + 18
{
Text [ en-US] = "~Footer";
};
String RID_LETTERWIZARDDIALOG_START + 19
{
Text [ en-US] = "~Use user data for return address";
};
String RID_LETTERWIZARDDIALOG_START + 20
{
Text [ en-US] = "~New sender address:";
};
String RID_LETTERWIZARDDIALOG_START + 21
{
Text [ en-US] = "Use placeholders for ~recipient's address";
};
String RID_LETTERWIZARDDIALOG_START + 22
{
Text [ en-US] = "Use address database for ~mail merge";
};
String RID_LETTERWIZARDDIALOG_START + 23
{
Text [ en-US] = "Include ~only on second and following pages";
};
String RID_LETTERWIZARDDIALOG_START + 24
{
Text [ en-US] = "~Include page number";
};
String RID_LETTERWIZARDDIALOG_START + 25
{
Text [ en-US] = "Letter Template";
};
String RID_LETTERWIZARDDIALOG_START + 26
{
Text [ en-US] = "Create a ~letter from this template";
};
String RID_LETTERWIZARDDIALOG_START + 27
{
Text [ en-US] = "Make ~manual changes to this letter template";
};
String RID_LETTERWIZARDDIALOG_START + 28
{
Text [ en-US] = "Page design";
};
String RID_LETTERWIZARDDIALOG_START + 29
{
Text [ en-US] = "Page design";
};
String RID_LETTERWIZARDDIALOG_START + 30
{
Text [ en-US] = "Page design";
};
String RID_LETTERWIZARDDIALOG_START + 31
{
Text [ en-US] = "This wizard helps you to create a letter template. You can then use the template as the basis for writing letters as often as desired.";
};
String RID_LETTERWIZARDDIALOG_START + 32
{
Text [ en-US] = "~Height:";
};
String RID_LETTERWIZARDDIALOG_START + 33
{
Text [ en-US] = "~Width:";
};
String RID_LETTERWIZARDDIALOG_START + 34
{
Text [ en-US] = "S~pacing to left margin:";
};
String RID_LETTERWIZARDDIALOG_START + 35
{
Text [ en-US] = "Spacing ~to top margin:";
};
String RID_LETTERWIZARDDIALOG_START + 36
{
Text [ en-US] = "Height:";
};
String RID_LETTERWIZARDDIALOG_START + 37
{
Text [ en-US] = "Width:";
};
String RID_LETTERWIZARDDIALOG_START + 38
{
Text [ en-US] = "S~pacing to left margin:";
};
String RID_LETTERWIZARDDIALOG_START + 39
{
Text [ en-US] = "Spacing ~to top margin:";
};
String RID_LETTERWIZARDDIALOG_START + 40
{
Text [ en-US] = "Height:";
};
String RID_LETTERWIZARDDIALOG_START + 42
{
Text [ en-US] = "Sender's address";
};
String RID_LETTERWIZARDDIALOG_START + 43
{
Text [ en-US] = "Name:";
};
String RID_LETTERWIZARDDIALOG_START + 44
{
Text [ en-US] = "Street:";
};
String RID_LETTERWIZARDDIALOG_START + 45
{
Text [ en-US] = "ZIP code/State/City:";
};
String RID_LETTERWIZARDDIALOG_START + 46
{
Text [ en-US] = "Recipient's address";
};
String RID_LETTERWIZARDDIALOG_START + 47
{
Text [ en-US] = "Footer";
};
String RID_LETTERWIZARDDIALOG_START + 48
{
Text [ en-US] = "This wizard creates a letter template which enables you to create multiple letters with the same layout and settings.";
};
String RID_LETTERWIZARDDIALOG_START + 49
{
Text [ en-US] = "To create another new letter out of the template just navigate to the template location and double-click it.";
};
String RID_LETTERWIZARDDIALOG_START + 50
{
Text [ en-US] = "Template name:";
};
String RID_LETTERWIZARDDIALOG_START + 51
{
Text [ en-US] = "Location and file name:";
};
String RID_LETTERWIZARDDIALOG_START + 52
{
Text [ en-US] = "How do you want to proceed?";
};
String RID_LETTERWIZARDDIALOG_START + 53
{
Text [ en-US] = "Please choose the type of letter and page design";
};
String RID_LETTERWIZARDDIALOG_START + 54
{
Text [ en-US] = "Select the items to be printed";
};
String RID_LETTERWIZARDDIALOG_START + 55
{
Text [ en-US] = "Specify items already on your letterhead paper";
};
String RID_LETTERWIZARDDIALOG_START + 56
{
Text [ en-US] = "Specify the sender and recipient information";
};
String RID_LETTERWIZARDDIALOG_START + 57
{
Text [ en-US] = "Fill in the information you would like in the footer";
};
String RID_LETTERWIZARDDIALOG_START + 58
{
Text [ en-US] = "Please specify last settings";
};
String RID_LETTERWIZARDDIALOG_START + 59
{
Text [ en-US] = "Subject:";
};
String RID_LETTERWIZARDDIALOG_START + 60
{
Text [ en-US] = "Elegant";
};
String RID_LETTERWIZARDDIALOG_START + 61
{
Text [ en-US] = "Modern";
};
String RID_LETTERWIZARDDIALOG_START + 62
{
Text [ en-US] = "Office";
};
String RID_LETTERWIZARDDIALOG_START + 63
{
Text [ en-US] = "Bottle";
};
String RID_LETTERWIZARDDIALOG_START + 64
{
Text [ en-US] = "Mail";
};
String RID_LETTERWIZARDDIALOG_START + 65
{
Text [ en-US] = "Marine";
};
String RID_LETTERWIZARDDIALOG_START + 66
{
Text [ en-US] = "Red Line";
};
// Letter Wizard Greeting Start
String RID_LETTERWIZARDSALUTATION_START + 1
{
Text [ en-US] = "To Whom it May Concern";
};
String RID_LETTERWIZARDSALUTATION_START + 2
{
Text [ en-US] = "Dear Sir or Madam";
};
String RID_LETTERWIZARDSALUTATION_START + 3
{
Text [ en-US] = "Hello";
};
// Letter Wizard Greeting Start
String RID_LETTERWIZARDGREETING_START + 1
{
Text [ en-US] = "Sincerely";
};
String RID_LETTERWIZARDGREETING_START + 2
{
Text [ en-US] = "Best regards";
};
String RID_LETTERWIZARDGREETING_START + 3
{
Text [ en-US] = "Cheers";
};
// Letter Wizard Roadmap Start
String RID_LETTERWIZARDROADMAP_START + 1
{
Text [ en-US] = "Page design";
};
String RID_LETTERWIZARDROADMAP_START + 2
{
Text [ en-US] = "Letterhead layout";
};
String RID_LETTERWIZARDROADMAP_START + 3
{
Text [ en-US] = "Printed items";
};
String RID_LETTERWIZARDROADMAP_START + 4
{
Text [ en-US] = "Recipient and sender";
};
String RID_LETTERWIZARDROADMAP_START + 5
{
Text [ en-US] = "Footer";
};
String RID_LETTERWIZARDROADMAP_START + 6
{
Text [ en-US] = "Name and location";
};
// FAX WIZARD RESOURCES
String RID_FAXWIZARDDIALOG_START + 1
{
Text [ en-US] = "Fax Wizard";
};
String RID_FAXWIZARDDIALOG_START + 2
{
Text [ en-US] = "Label9";
};
String RID_FAXWIZARDDIALOG_START + 3
{
Text [ en-US] = "~Business Fax";
};
String RID_FAXWIZARDDIALOG_START + 4
{
Text [ en-US] = "~Personal Fax";
};
String RID_FAXWIZARDDIALOG_START + 5
{
Text [ en-US] = "~Logo";
};
String RID_FAXWIZARDDIALOG_START + 6
{
Text [ en-US] = "S~ubject line";
};
String RID_FAXWIZARDDIALOG_START + 7
{
Text [ en-US] = "S~alutation";
};
String RID_FAXWIZARDDIALOG_START + 8
{
Text [ en-US] = "~Complimentary close";
};
String RID_FAXWIZARDDIALOG_START + 9
{
Text [ en-US] = "~Footer";
};
String RID_FAXWIZARDDIALOG_START + 10
{
Text [ en-US] = "~Use user data for return address";
};
String RID_FAXWIZARDDIALOG_START + 11
{
Text [ en-US] = "~New return address";
};
String RID_FAXWIZARDDIALOG_START + 12
{
Text [ en-US] = "My Fax Template";
};
String RID_FAXWIZARDDIALOG_START + 13
{
Text [ en-US] = "Create a ~fax from this template";
};
String RID_FAXWIZARDDIALOG_START + 14
{
Text [ en-US] = "Make ~manual changes to this fax template";
};
String RID_FAXWIZARDDIALOG_START + 15
{
Text [ en-US] = "Page design";
};
String RID_FAXWIZARDDIALOG_START + 16
{
Text [ en-US] = "Page design";
};
String RID_FAXWIZARDDIALOG_START + 17
{
Text [ en-US] = "This wizard helps you to create a fax template. The template can then be used to create a fax whenever needed.";
};
String RID_FAXWIZARDDIALOG_START + 18
{
Text [ en-US] = "Return address";
};
String RID_FAXWIZARDDIALOG_START + 19
{
Text [ en-US] = "Name:";
};
String RID_FAXWIZARDDIALOG_START + 20
{
Text [ en-US] = "Street:";
};
String RID_FAXWIZARDDIALOG_START + 21
{
Text [ en-US] = "ZIP code/State/City:";
};
String RID_FAXWIZARDDIALOG_START + 22
{
Text [ en-US] = "Footer";
};
String RID_FAXWIZARDDIALOG_START + 23
{
Text [ en-US] = "This wizard creates a fax template which enables you to create multiple faxes with the same layout and settings.";
};
String RID_FAXWIZARDDIALOG_START + 24
{
Text [ en-US] = "To create another new fax out of the template, go to the location where you saved the template and double-click the file.";
};
String RID_FAXWIZARDDIALOG_START + 25
{
Text [ en-US] = "Template Name:";
};
String RID_FAXWIZARDDIALOG_START + 26
{
Text [ en-US] = "Location and file name:";
};
String RID_FAXWIZARDDIALOG_START + 27
{
Text [ en-US] = "What do you want to do next?";
};
String RID_FAXWIZARDDIALOG_START + 28
{
Text [ en-US] = "Choose the type of fax and a page design";
};
String RID_FAXWIZARDDIALOG_START + 29
{
Text [ en-US] = "Select items to include in the fax template";
};
String RID_FAXWIZARDDIALOG_START + 30
{
Text [ en-US] = "Specify sender and recipient information";
};
String RID_FAXWIZARDDIALOG_START + 31
{
Text [ en-US] = "Enter text for the footer";
};
String RID_FAXWIZARDDIALOG_START + 32
{
Text [ en-US] = "Choose a name and save the template";
};
String RID_FAXWIZARDDIALOG_START + 33
{
Text [ en-US] = "Include ~only on second and following pages";
};
String RID_FAXWIZARDDIALOG_START + 34
{
Text [ en-US] = "~Include page number";
};
String RID_FAXWIZARDDIALOG_START + 35
{
Text [ en-US] = "~Date";
};
String RID_FAXWIZARDDIALOG_START + 36
{
Text [ en-US] = "~Type of message";
};
String RID_FAXWIZARDDIALOG_START + 37
{
Text [ en-US] = "Fax Number:";
};
String RID_FAXWIZARDDIALOG_START + 38
{
Text [ en-US] = "Use placeholders for ~recipient's address";
};
String RID_FAXWIZARDDIALOG_START + 39
{
Text [ en-US] = "Use address database for ~mail merge";
};
String RID_FAXWIZARDDIALOG_START + 40
{
Text [ en-US] = "~New return address";
};
String RID_FAXWIZARDDIALOG_START + 41
{
Text [ en-US] = "To:";
};
String RID_FAXWIZARDDIALOG_START + 42
{
Text [ en-US] = "From:";
};
String RID_FAXWIZARDDIALOG_START + 43
{
Text [ en-US] = "Fax:";
};
String RID_FAXWIZARDDIALOG_START + 44
{
Text [ en-US] = "Tel:";
};
String RID_FAXWIZARDDIALOG_START + 45
{
Text [ en-US] = "E-mail:";
};
String RID_FAXWIZARDDIALOG_START + 46
{
Text [ en-US] = "This template consists of";
};
String RID_FAXWIZARDDIALOG_START + 47
{
Text [ en-US] = "page";
};
String RID_FAXWIZARDDIALOG_START + 48
{
Text [ en-US] = "Please inform us if transmission errors occur.";
};
String RID_FAXWIZARDDIALOG_START + 49
{
Text [ en-US] = "Bottle";
};
String RID_FAXWIZARDDIALOG_START + 50
{
Text [ en-US] = "Lines";
};
String RID_FAXWIZARDDIALOG_START + 51
{
Text [ en-US] = "Marine";
};
String RID_FAXWIZARDDIALOG_START + 52
{
Text [ en-US] = "Classic Fax";
};
String RID_FAXWIZARDDIALOG_START + 53
{
Text [ en-US] = "Classic Fax from Private";
};
String RID_FAXWIZARDDIALOG_START + 54
{
Text [ en-US] = "Modern Fax";
};
String RID_FAXWIZARDDIALOG_START + 55
{
Text [ en-US] = "Modern Fax from Private";
};
String RID_FAXWIZARDDIALOG_START + 56
{
Text [ en-US] = "Fax";
};
// Fax Wizard Communication Start
String RID_FAXWIZARDCOMMUNICATION_START + 1
{
Text [ en-US] = "Important Information!";
};
String RID_FAXWIZARDCOMMUNICATION_START + 2
{
Text [ en-US] = "For your information";
};
String RID_FAXWIZARDCOMMUNICATION_START + 3
{
Text [ en-US] = "News!";
};
// Fax Wizard Salutation Start
String RID_FAXWIZARDSALUTATION_START + 1
{
Text [ en-US] = "To whom it may concern,";
};
String RID_FAXWIZARDSALUTATION_START + 2
{
Text [ en-US] = "Dear Sir or Madam,";
};
String RID_FAXWIZARDSALUTATION_START + 3
{
Text [ en-US] = "Hello,";
};
String RID_FAXWIZARDSALUTATION_START + 4
{
Text [ en-US] = "Hi,";
};
// Fax Wizard Greeting Start
String RID_FAXWIZARDGREETING_START + 1
{
Text [ en-US] = "Sincerely";
};
String RID_FAXWIZARDGREETING_START + 2
{
Text [ en-US] = "Yours faithfully";
};
String RID_FAXWIZARDGREETING_START + 3
{
Text [ en-US] = "Regards";
};
String RID_FAXWIZARDGREETING_START + 4
{
Text [ en-US] = "Love";
};
// Fax Wizard Roadmap Start
String RID_FAXWIZARDROADMAP_START + 1
{
Text [ en-US] = "Page design";
};
String RID_FAXWIZARDROADMAP_START + 2
{
Text [ en-US] = "Items to include";
};
String RID_FAXWIZARDROADMAP_START + 3
{
Text [ en-US] = "Sender and Recipient";
};
String RID_FAXWIZARDROADMAP_START + 4
{
Text [ en-US] = "Footer";
};
String RID_FAXWIZARDROADMAP_START + 5
{
Text [ en-US] = "Name and location";
};
// AGENDA WIZARD RESOURCES
String RID_AGENDAWIZARDDIALOG_START +1
{
Text [en-US ] = "Agenda Wizard";
};
String RID_AGENDAWIZARDDIALOG_START +2
{
Text [en-US ] = "Make ~manual changes to this agenda template";
};
String RID_AGENDAWIZARDDIALOG_START +3
{
Text [en-US ] = "Template name:";
};
String RID_AGENDAWIZARDDIALOG_START + 4
{
Text [en-US ] = "Location and file name:";
};
String RID_AGENDAWIZARDDIALOG_START +5
{
Text [en-US ] = "What do you want to do next?";
};
String RID_AGENDAWIZARDDIALOG_START +6
{
Text [en-US ] = "Please choose the page design for the agenda";
};
String RID_AGENDAWIZARDDIALOG_START +7
{
Text [en-US ] = "Please select the headings you wish to include in your agenda template";
};
String RID_AGENDAWIZARDDIALOG_START +8
{
Text [en-US ] = "Please enter general information for the event";
};
String RID_AGENDAWIZARDDIALOG_START +9
{
Text [en-US ] = "Please specify items for the agenda";
};
String RID_AGENDAWIZARDDIALOG_START +10
{
Text [en-US ] = "Please select the names you wish to include in your agenda template";
};
String RID_AGENDAWIZARDDIALOG_START +11
{
Text [en-US ] = "Choose a name and save the template";
};
String RID_AGENDAWIZARDDIALOG_START +12
{
Text [en-US ] = "Include form for recording minutes";
};
String RID_AGENDAWIZARDDIALOG_START +13
{
Text [en-US ] = "This wizard helps you to create an agenda template. The template can then be used to create an agenda whenever needed.";
};
String RID_AGENDAWIZARDDIALOG_START +14
{
Text [en-US ] = "Time:";
};
String RID_AGENDAWIZARDDIALOG_START +15
{
Text [en-US ] = "Name:";
};
String RID_AGENDAWIZARDDIALOG_START + 16
{
Text [en-US ] = "Location:";
};
String RID_AGENDAWIZARDDIALOG_START +17
{
Text [en-US ] = "Placeholders will be used in empty fields. You can replace placeholders with text later.";
};
String RID_AGENDAWIZARDDIALOG_START +18
{
Text [en-US ] = "...";
};
String RID_AGENDAWIZARDDIALOG_START +19
{
Text [en-US ] = "Create an ~agenda from this template";
};
String RID_AGENDAWIZARDDIALOG_START +20
{
Text [en-US ] = "To create a new agenda out of the template, go to the location where you saved the template and double-click the file.";
};
String RID_AGENDAWIZARDDIALOG_START +21
{
Text [en-US ] = "Agenda item";
};
String RID_AGENDAWIZARDDIALOG_START +22
{
Text [en-US ] = "Responsible";
};
String RID_AGENDAWIZARDDIALOG_START +23
{
Text [en-US ] = "Duration";
};
String RID_AGENDAWIZARDDIALOG_START +24
{
Text [en-US ] = "Meeting called by";
};
String RID_AGENDAWIZARDDIALOG_START +25
{
Text [en-US ] = "Chairperson";
};
String RID_AGENDAWIZARDDIALOG_START +26
{
Text [en-US ] = "Minute keeper";
};
String RID_AGENDAWIZARDDIALOG_START +27
{
Text [en-US ] = "Moderator";
};
String RID_AGENDAWIZARDDIALOG_START +28
{
Text [en-US ] = "Attendees";
};
String RID_AGENDAWIZARDDIALOG_START +29
{
Text [en-US ] = "Observers";
};
String RID_AGENDAWIZARDDIALOG_START +30
{
Text [en-US ] = "Facility personnel";
};
String RID_AGENDAWIZARDDIALOG_START +31
{
Text [en-US ] = "The agenda template will include placeholders for the names of the selected people. When creating an agenda from the template, you can replace these placeholder with the appropriate names.";
};
String RID_AGENDAWIZARDDIALOG_START +32
{
Text [en-US ] = "Type of meeting";
};
String RID_AGENDAWIZARDDIALOG_START +33
{
Text [en-US ] = "Please read";
};
String RID_AGENDAWIZARDDIALOG_START +34
{
Text [en-US ] = "Please bring";
};
String RID_AGENDAWIZARDDIALOG_START +35
{
Text [en-US ] = "Notes";
};
String RID_AGENDAWIZARDDIALOG_START +36
{
Text [en-US ] = "The agenda template will include placeholders for the selected items.";
};
String RID_AGENDAWIZARDDIALOG_START +38
{
Text [en-US ] = "Date:";
};
String RID_AGENDAWIZARDDIALOG_START +39
{
Text [en-US ] = "This wizard creates an agenda template which enables you to create multiple agendas with the same layout and settings.";
};
String RID_AGENDAWIZARDDIALOG_START +40
{
Text [en-US ] = "Page design:";
};
String RID_AGENDAWIZARDDIALOG_START +41
{
Text [en-US ] = "myAgendaTemplate.stw";
};
String RID_AGENDAWIZARDDIALOG_START +42
{
Text [en-US ] = "My Agenda Template";
};
String RID_AGENDAWIZARDDIALOG_START +43
{
Text [en-US ] = "An unexpected error occurred while saving the agenda template.";
};
String RID_AGENDAWIZARDDIALOG_START +44
{
Text [en-US ] = "Name";
};
String RID_AGENDAWIZARDDIALOG_START +45
{
Text [en-US ] = "Date";
};
String RID_AGENDAWIZARDDIALOG_START +46
{
Text [en-US ] = "Time";
};
String RID_AGENDAWIZARDDIALOG_START + 47
{
Text [en-US ] = "Location";
};
String RID_AGENDAWIZARDDIALOG_START +48
{
Text [en-US ] = "Click to replace this text";
};
String RID_AGENDAWIZARDDIALOG_START +50
{
Text [en-US ] = "Page design";
};
String RID_AGENDAWIZARDDIALOG_START +51
{
Text [en-US ] = "General information";
};
String RID_AGENDAWIZARDDIALOG_START +52
{
Text [en-US ] = "Headings to include";
};
String RID_AGENDAWIZARDDIALOG_START +53
{
Text [en-US ] = "Names";
};
String RID_AGENDAWIZARDDIALOG_START +54
{
Text [en-US ] = "Agenda items";
};
String RID_AGENDAWIZARDDIALOG_START +55
{
Text [en-US ] = "Name and location";
};
String RID_AGENDAWIZARDDIALOG_START +56
{
Text [en-US ] = "An unexpected error occurred while opening the agenda template.";
};
String RID_AGENDAWIZARDDIALOG_START +57
{
Text [en-US ] = "Type of meeting";
};
String RID_AGENDAWIZARDDIALOG_START +58
{
Text [en-US ] = "Please bring";
};
String RID_AGENDAWIZARDDIALOG_START +59
{
Text [en-US ] = "Please read";
};
String RID_AGENDAWIZARDDIALOG_START +60
{
Text [en-US ] = "Notes";
};
String RID_AGENDAWIZARDDIALOG_START +61
{
Text [en-US ] = "Meeting called by";
};
String RID_AGENDAWIZARDDIALOG_START +62
{
Text [en-US ] = "Chairperson";
};
String RID_AGENDAWIZARDDIALOG_START +63
{
Text [en-US ] = "Attendees";
};
String RID_AGENDAWIZARDDIALOG_START +64
{
Text [en-US ] = "Minute keeper";
};
String RID_AGENDAWIZARDDIALOG_START +65
{
Text [en-US ] = "Moderator";
};
String RID_AGENDAWIZARDDIALOG_START +66
{
Text [en-US ] = "Observers";
};
String RID_AGENDAWIZARDDIALOG_START +67
{
Text [en-US ] = "Facility personnel";
};
String RID_AGENDAWIZARDDIALOG_START +68
{
Text [en-US ] = "Insert";
};
String RID_AGENDAWIZARDDIALOG_START +69
{
Text [en-US ] = "Remove";
};
String RID_AGENDAWIZARDDIALOG_START +70
{
Text [en-US ] = "Move up";
};
String RID_AGENDAWIZARDDIALOG_START +71
{
Text [en-US ] = "Move down";
};
String RID_AGENDAWIZARDDIALOG_START +72
{
Text [en-US ] = "Date:";
};
String RID_AGENDAWIZARDDIALOG_START +73
{
Text [en-US ] = "Time:";
};
String RID_AGENDAWIZARDDIALOG_START +74
{
Text [en-US ] = "Location:";
};
String RID_AGENDAWIZARDDIALOG_START +75
{
Text [en-US ] = "Topics";
};
String RID_AGENDAWIZARDDIALOG_START +76
{
Text [en-US ] = "Num.";
};
String RID_AGENDAWIZARDDIALOG_START +77
{
Text [en-US ] = "Topic";
};
String RID_AGENDAWIZARDDIALOG_START +78
{
Text [en-US ] = "Responsible";
};
String RID_AGENDAWIZARDDIALOG_START +79
{
Text [en-US ] = "Time";
};
String RID_AGENDAWIZARDDIALOG_START +80
{
Text [en-US ] = "Additional information";
};
String RID_AGENDAWIZARDDIALOG_START +81
{
Text [en-US ] = "Minutes for";
};
String RID_AGENDAWIZARDDIALOG_START +82
{
Text [en-US ] = "Discussion:";
};
String RID_AGENDAWIZARDDIALOG_START +83
{
Text [en-US ] = "Conclusion:";
};
String RID_AGENDAWIZARDDIALOG_START +84
{
Text [en-US ] = "To do:";
};
String RID_AGENDAWIZARDDIALOG_START +85
{
Text [en-US ] = "Responsible party:";
};
String RID_AGENDAWIZARDDIALOG_START +86
{
Text [en-US ] = "Deadline:";
};
String RID_AGENDAWIZARDDIALOG_START +87
{
Text [en-US ] = "Blue";
};
String RID_AGENDAWIZARDDIALOG_START +88
{
Text [en-US ] = "Classic";
};
String RID_AGENDAWIZARDDIALOG_START +89
{
Text [en-US ] = "Colorful";
};
String RID_AGENDAWIZARDDIALOG_START +90
{
Text [en-US ] = "Elegant";
};
String RID_AGENDAWIZARDDIALOG_START +91
{
Text [en-US ] = "Green";
};
String RID_AGENDAWIZARDDIALOG_START +92
{
Text [en-US ] = "Grey";
};
String RID_AGENDAWIZARDDIALOG_START +93
{
Text [en-US ] = "Modern";
};
String RID_AGENDAWIZARDDIALOG_START +94
{
Text [en-US ] = "Orange";
};
String RID_AGENDAWIZARDDIALOG_START +95
{
Text [en-US ] = "Red";
};
String RID_AGENDAWIZARDDIALOG_START +96
{
Text [en-US ] = "Simple";
};
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */