/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */
#include "ConversionHelper.hxx"
#include "GraphicHelpers.hxx"
#include <dmapper/GraphicZOrderHelper.hxx>
#include "PropertyIds.hxx"

#include <ooxml/resourceids.hxx>

#include <com/sun/star/text/HoriOrientation.hpp>
#include <com/sun/star/text/VertOrientation.hpp>
#include <com/sun/star/text/RelOrientation.hpp>
#include <com/sun/star/text/WrapTextMode.hpp>

#include <oox/drawingml/drawingmltypes.hxx>
#include <tools/resmgr.hxx>
#include <vcl/svapp.hxx>
#include <svx/svdstr.hrc>

#include <iostream>
#include <memory>

namespace writerfilter {
namespace dmapper {

using namespace com::sun::star;

PositionHandler::PositionHandler( std::pair<OUString, OUString>& rPositionOffsets, std::pair<OUString, OUString>& rAligns ) :
LoggedProperties("PositionHandler"),
m_nOrient(text::VertOrientation::NONE),
m_nPosition(0),
m_rPositionOffsets(rPositionOffsets),
m_rAligns(rAligns)
{
    m_nRelation = text::RelOrientation::FRAME;
}

PositionHandler::~PositionHandler( )
{
}

void PositionHandler::lcl_attribute( Id aName, Value& rVal )
{
    sal_Int32 nIntValue = rVal.getInt( );
    switch ( aName )
    {
        case NS_ooxml::LN_CT_PosV_relativeFrom:
            {
                // TODO There are some other unhandled values
                static const Id pVertRelValues[] =
                {
                    NS_ooxml::LN_Value_wordprocessingDrawing_ST_RelFromV_margin,
                    NS_ooxml::LN_Value_wordprocessingDrawing_ST_RelFromV_page,
                    NS_ooxml::LN_Value_wordprocessingDrawing_ST_RelFromV_paragraph,
                    NS_ooxml::LN_Value_wordprocessingDrawing_ST_RelFromV_line
                };

                static const sal_Int16 pVertRelations[] =
                {
                    text::RelOrientation::PAGE_PRINT_AREA,
                    text::RelOrientation::PAGE_FRAME,
                    text::RelOrientation::FRAME,
                    text::RelOrientation::TEXT_LINE
                };

                for ( int i = 0; i < 4; i++ )
                {
                    if ( pVertRelValues[i] == sal_uInt32( nIntValue ) )
                        m_nRelation = pVertRelations[i];
                }
            }
            break;
        case NS_ooxml::LN_CT_PosH_relativeFrom:
            {
                // TODO There are some other unhandled values
                static const Id pHoriRelValues[] =
                {
                    NS_ooxml::LN_Value_wordprocessingDrawing_ST_RelFromH_margin,
                    NS_ooxml::LN_Value_wordprocessingDrawing_ST_RelFromH_page,
                    NS_ooxml::LN_Value_wordprocessingDrawing_ST_RelFromH_column,
                    NS_ooxml::LN_Value_wordprocessingDrawing_ST_RelFromH_character
                };

                static const sal_Int16 pHoriRelations[] =
                {
                    text::RelOrientation::PAGE_PRINT_AREA,
                    text::RelOrientation::PAGE_FRAME,
                    text::RelOrientation::FRAME,
                    text::RelOrientation::CHAR,
                };

                for ( int i = 0; i < 4; i++ )
                {
                    if ( pHoriRelValues[i] == sal_uInt32( nIntValue ) )
                        m_nRelation = pHoriRelations[i];
                }
            }
            break;
        default:
#ifdef DEBUG_WRITERFILTER
            TagLogger::getInstance().element("unhandled");
#endif
            break;
    }
}

void PositionHandler::lcl_sprm(Sprm& rSprm)
{
    sal_uInt32 nSprmId = rSprm.getId();

    switch (nSprmId)
    {
        case NS_ooxml::LN_CT_PosH_posOffset:
            m_nPosition = oox::drawingml::convertEmuToHmm(m_rPositionOffsets.first.toInt32());
            break;
        case NS_ooxml::LN_CT_PosV_posOffset:
            m_nPosition = oox::drawingml::convertEmuToHmm(m_rPositionOffsets.second.toInt32());
            break;
        case NS_ooxml::LN_CT_PosH_align:
        {
            OUString& rAlign = m_rAligns.first;
            if (rAlign == "left")
                m_nOrient = text::HoriOrientation::LEFT;
            else if (rAlign == "right")
                m_nOrient = text::HoriOrientation::RIGHT;
            else if (rAlign == "center")
                m_nOrient = text::HoriOrientation::CENTER;
            else if (rAlign == "inside")
                m_nOrient = text::HoriOrientation::INSIDE;
            else if (rAlign == "outside")
                m_nOrient = text::HoriOrientation::OUTSIDE;
            break;
        }
        case NS_ooxml::LN_CT_PosV_align:
        {
            OUString& rAlign = m_rAligns.second;
            if (rAlign == "top")
                m_nOrient = text::VertOrientation::TOP;
            else if (rAlign == "bottom")
                m_nOrient = text::VertOrientation::BOTTOM;
            else if (rAlign == "center")
                m_nOrient = text::VertOrientation::CENTER;
            else if (rAlign == "inside")
                m_nOrient = text::VertOrientation::NONE;
            else if (rAlign == "outside")
                m_nOrient = text::VertOrientation::NONE;
            break;
        }
    }
}

sal_Int16 PositionHandler::orientation() const
{
    if( m_nRelation == text::RelOrientation::TEXT_LINE )
    { // It appears that to 'line of text' alignment is backwards to other alignments,
      // 'top' meaning putting on top of the line instead of having top at the line.
        if( m_nOrient == text::VertOrientation::TOP )
            return text::VertOrientation::BOTTOM;
        else if( m_nOrient == text::VertOrientation::BOTTOM )
            return text::VertOrientation::TOP;
    }
    return m_nOrient;
}

WrapHandler::WrapHandler( ) :
LoggedProperties("WrapHandler"),
    m_nType( 0 ),
    m_nSide( 0 )
{
}

WrapHandler::~WrapHandler( )
{
}

void WrapHandler::lcl_attribute( Id aName, Value& rVal )
{
    switch ( aName )
    {
        case NS_ooxml::LN_CT_Wrap_type:
            m_nType = sal_Int32( rVal.getInt( ) );
            break;
        case NS_ooxml::LN_CT_Wrap_side:
            m_nSide = sal_Int32( rVal.getInt( ) );
            break;
        default:;
    }
}

void WrapHandler::lcl_sprm( Sprm& )
{
}

sal_Int32 WrapHandler::getWrapMode( )
{
    // The wrap values do not map directly to our wrap mode,
    // e.g. none in .docx actually means through in LO.
    sal_Int32 nMode = text::WrapTextMode_THROUGHT;

    switch ( m_nType )
    {
        case NS_ooxml::LN_Value_vml_wordprocessingDrawing_ST_WrapType_square:
        // through and tight are somewhat complicated, approximate
        case NS_ooxml::LN_Value_vml_wordprocessingDrawing_ST_WrapType_tight:
        case NS_ooxml::LN_Value_vml_wordprocessingDrawing_ST_WrapType_through:
            {
                switch ( m_nSide )
                {
                    case NS_ooxml::LN_Value_vml_wordprocessingDrawing_ST_WrapSide_left:
                        nMode = text::WrapTextMode_LEFT;
                        break;
                    case NS_ooxml::LN_Value_vml_wordprocessingDrawing_ST_WrapSide_right:
                        nMode = text::WrapTextMode_RIGHT;
                        break;
                    default:
                        nMode = text::WrapTextMode_PARALLEL;
                }
            }
            break;
        case NS_ooxml::LN_Value_vml_wordprocessingDrawing_ST_WrapType_topAndBottom:
            nMode = text::WrapTextMode_NONE;
            break;
        case NS_ooxml::LN_Value_vml_wordprocessingDrawing_ST_WrapType_none:
        default:
            nMode = text::WrapTextMode_THROUGHT;
    }

    return nMode;
}


void GraphicZOrderHelper::addItem(uno::Reference<beans::XPropertySet> const& props, sal_Int32 const relativeHeight)
{
    items[ relativeHeight ] = props;
}

// The relativeHeight value in .docx is an arbitrary number, where only the relative ordering matters.
// But in Writer, the z-order is index in 0..(numitems-1) range, so whenever a new item needs to be
// added in the proper z-order, it is necessary to find the proper index.
sal_Int32 GraphicZOrderHelper::findZOrder( sal_Int32 relativeHeight, bool bOldStyle )
{
    Items::const_iterator it = items.begin();
    while( it != items.end())
    {
        // std::map is iterated sorted by key

        // Old-style ordering differs in what should happen when there is already an item with the same z-order:
        // we belong under it in case of new-style, but we belong above it in case of old-style.
        bool bCond = bOldStyle ? (it->first > relativeHeight) : (it->first >= relativeHeight);

        if( bCond )
            break; // this is the first one higher, we belong right before it
        else
            ++it;
    }
    if( it == items.end()) // we're topmost
    {
        if( items.empty())
            return 0;
        sal_Int32 itemZOrder(0);
        --it;
        if( it->second->getPropertyValue(getPropertyName( PROP_Z_ORDER )) >>= itemZOrder )
            return itemZOrder + 1; // after the topmost
    }
    else
    {
        sal_Int32 itemZOrder(0);
        if( it->second->getPropertyValue(getPropertyName( PROP_Z_ORDER )) >>= itemZOrder )
            return itemZOrder; // before the item
    }
    SAL_WARN( "writerfilter", "findZOrder() didn't find item z-order" );
    return 0; // this should not(?) happen
}

GraphicNamingHelper::GraphicNamingHelper()
    : m_nCounter(0)
{
}

OUString GraphicNamingHelper::NameGraphic(const OUString& rTemplate)
{
    OUString aRet = rTemplate;

    if (aRet.isEmpty())
    {
        // Empty template: then auto-generate a unique name.
        std::unique_ptr<ResMgr> pResMgr(ResMgr::CreateResMgr("svx", Application::GetSettings().GetUILanguageTag()));
        OUString aPrefix(ResId(STR_ObjNameSingulGRAF, *pResMgr).toString());
        aRet += aPrefix + OUString::number(++m_nCounter);
    }

    return aRet;
}

} }

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */