path: root/sw/inc/tblafmt.hxx

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */
#ifndef INCLUDED_SW_INC_TBLAFMT_HXX
#define INCLUDED_SW_INC_TBLAFMT_HXX
/*
 * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 *
 *     The structure of table auto formatting should not be changed. It is used
 *     by different code of Writer and Calc. If a change is necessary, the
 *     source code of both applications must be changed!
 *
 * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 */

#include <boost/scoped_ptr.hpp>

#include "hintids.hxx"
#include <svx/algitem.hxx>
#include <editeng/fontitem.hxx>
#include <editeng/fhgtitem.hxx>
#include <editeng/wghtitem.hxx>
#include <editeng/postitem.hxx>
#include <editeng/udlnitem.hxx>
#include <editeng/crossedoutitem.hxx>
#include <editeng/contouritem.hxx>
#include <editeng/shdditem.hxx>
#include <editeng/colritem.hxx>
#include <editeng/boxitem.hxx>
#include <editeng/brushitem.hxx>
#include <editeng/adjustitem.hxx>
#include <editeng/justifyitem.hxx>
#include <editeng/formatbreakitem.hxx>
#include <editeng/keepitem.hxx>
#include <editeng/frmdiritem.hxx>
#include <editeng/shaditem.hxx>
#include <svx/rotmodit.hxx>
#include <svl/intitem.hxx>
#include <editeng/lineitem.hxx>
#include <fmtpdsc.hxx>
#include <fmtlsplt.hxx>
#include <fmtrowsplt.hxx>
#include <fmtornt.hxx>
#include "swdllapi.h"

struct SwAfVersions;

class SvNumberFormatter;

class SwBoxAutoFmt
{
    // common attributes of Calc and Writer
    // --- from 641 on: CJK and CTL font settings
    SvxFontItem         aFont;
    SvxFontHeightItem   aHeight;
    SvxWeightItem       aWeight;
    SvxPostureItem      aPosture;

    SvxFontItem         aCJKFont;
    SvxFontHeightItem   aCJKHeight;
    SvxWeightItem       aCJKWeight;
    SvxPostureItem      aCJKPosture;

    SvxFontItem         aCTLFont;
    SvxFontHeightItem   aCTLHeight;
    SvxWeightItem       aCTLWeight;
    SvxPostureItem      aCTLPosture;

    SvxUnderlineItem    aUnderline;
    SvxOverlineItem     aOverline;
    SvxCrossedOutItem   aCrossedOut;
    SvxContourItem      aContour;
    SvxShadowedItem     aShadowed;
    SvxColorItem        aColor;
    SvxBoxItem          aBox;
    SvxLineItem         aTLBR;
    SvxLineItem         aBLTR;
    SvxBrushItem        aBackground;

    // Writer specific
    SvxAdjustItem       aAdjust;
    SvxFrameDirectionItem m_aTextOrientation;
    SwFmtVertOrient m_aVerticalAlignment;

    // Calc specific
    SvxHorJustifyItem   aHorJustify;
    SvxVerJustifyItem   aVerJustify;
    SfxBoolItem         aStacked;
    SvxMarginItem       aMargin;
    SfxBoolItem         aLinebreak;
    SfxInt32Item        aRotateAngle;
    SvxRotateModeItem   aRotateMode;

    // number format
    OUString            sNumFmtString;
    LanguageType        eSysLanguage, eNumFmtLanguage;

public:
    SwBoxAutoFmt();
    SwBoxAutoFmt( const SwBoxAutoFmt& rNew );
    ~SwBoxAutoFmt();

    int operator==( const SwBoxAutoFmt& rCmp ) const;
    SwBoxAutoFmt& operator=( const SwBoxAutoFmt& rNew );

    // The get-methods.
    const SvxFontItem       &GetFont() const        { return aFont; }
    const SvxFontHeightItem &GetHeight() const      { return aHeight; }
    const SvxWeightItem     &GetWeight() const      { return aWeight; }
    const SvxPostureItem    &GetPosture() const     { return aPosture; }
    const SvxFontItem       &GetCJKFont() const     { return aCJKFont; }
    const SvxFontHeightItem &GetCJKHeight() const   { return aCJKHeight; }
    const SvxWeightItem     &GetCJKWeight() const   { return aCJKWeight; }
    const SvxPostureItem    &GetCJKPosture() const  { return aCJKPosture; }
    const SvxFontItem       &GetCTLFont() const     { return aCTLFont; }
    const SvxFontHeightItem &GetCTLHeight() const   { return aCTLHeight; }
    const SvxWeightItem     &GetCTLWeight() const   { return aCTLWeight; }
    const SvxPostureItem    &GetCTLPosture() const  { return aCTLPosture; }
    const SvxUnderlineItem  &GetUnderline() const   { return aUnderline; }
    const SvxOverlineItem   &GetOverline() const    { return aOverline; }
    const SvxCrossedOutItem &GetCrossedOut() const  { return aCrossedOut; }
    const SvxContourItem    &GetContour() const     { return aContour; }
    const SvxShadowedItem   &GetShadowed() const    { return aShadowed; }
    const SvxColorItem      &GetColor() const       { return aColor; }
    const SvxAdjustItem     &GetAdjust() const      { return aAdjust; }
    const SvxFrameDirectionItem& GetTextOrientation() const { return m_aTextOrientation; }
    const SwFmtVertOrient& GetVerticalAlignment() const { return m_aVerticalAlignment; }
    const SvxBoxItem        &GetBox() const         { return aBox; }
    const SvxLineItem       &GetTLBR() const        { return aTLBR; }
    const SvxLineItem       &GetBLTR() const        { return aBLTR; }
    const SvxBrushItem      &GetBackground() const  { return aBackground; }
    void GetValueFormat( OUString& rFmt, LanguageType& rLng, LanguageType& rSys ) const
        { rFmt = sNumFmtString; rLng = eNumFmtLanguage; rSys = eSysLanguage; }

    // The set-methods.
    void SetFont( const SvxFontItem& rNew )             { aFont = rNew; }
    void SetHeight( const SvxFontHeightItem& rNew )     { aHeight = rNew; }
    void SetWeight( const SvxWeightItem& rNew )         { aWeight = rNew; }
    void SetPosture( const SvxPostureItem& rNew )       { aPosture = rNew; }
    void SetCJKFont( const SvxFontItem& rNew )          { aCJKFont = rNew; }
    void SetCJKHeight( const SvxFontHeightItem& rNew )  { aCJKHeight = rNew; }
    void SetCJKWeight( const SvxWeightItem& rNew )      { aCJKWeight = rNew; }
    void SetCJKPosture( const SvxPostureItem& rNew )    { aCJKPosture = rNew; }
    void SetCTLFont( const SvxFontItem& rNew )          { aCTLFont = rNew; }
    void SetCTLHeight( const SvxFontHeightItem& rNew )  { aCTLHeight = rNew; }
    void SetCTLWeight( const SvxWeightItem& rNew )      { aCTLWeight = rNew; }
    void SetCTLPosture( const SvxPostureItem& rNew )    { aCTLPosture = rNew; }
    void SetUnderline( const SvxUnderlineItem& rNew )   { aUnderline = rNew; }
    void SetOverline( const SvxOverlineItem& rNew )     { aOverline = rNew; }
    void SetCrossedOut( const SvxCrossedOutItem& rNew ) { aCrossedOut = rNew; }
    void SetContour( const SvxContourItem& rNew )       { aContour = rNew; }
    void SetShadowed( const SvxShadowedItem& rNew )     { aShadowed = rNew; }
    void SetColor( const SvxColorItem& rNew )           { aColor = rNew; }
    void SetAdjust( const SvxAdjustItem& rNew )
        {
            aAdjust.SetAdjust( rNew.GetAdjust() );
            aAdjust.SetOneWord( rNew.GetOneWord() );
            aAdjust.SetLastBlock( rNew.GetLastBlock() );
        }
    void SetTextOrientation(const SvxFrameDirectionItem& rNew) { m_aTextOrientation = rNew; }
    void SetVerticalAlignment(const SwFmtVertOrient& rNew) { m_aVerticalAlignment = rNew; }
    void SetBox( const SvxBoxItem& rNew )               { aBox = rNew; }
    void SetBackground( const SvxBrushItem& rNew )      { aBackground = rNew; }
    void SetValueFormat( const OUString& rFmt, LanguageType eLng, LanguageType eSys )
        { sNumFmtString = rFmt; eNumFmtLanguage = eLng; eSysLanguage = eSys; }

    bool Load( SvStream& rStream, const SwAfVersions& rVersions, sal_uInt16 nVer );
    bool Save( SvStream& rStream, sal_uInt16 fileVersion ) const;
    bool SaveVersionNo( SvStream& rStream, sal_uInt16 fileVersion ) const;
};

/*
@remarks
A table has a number of lines. These lines seem to correspond with rows, except in the case of
rows spanning more than one line. Each line contains a number of boxes/cells.

AutoFormat properties are retrieved and stored in a grid of 16 table boxes. A sampling approach
is used to read the data. 4 lines are picked, and 4 boxes are picked from each.

The line picking and box picking algorithms are similar. We start at the first line/box, and pick
lines/boxes one by one for a maximum of 3. The 4th line/box is the last line/box in the current
table/line. If we hit the end of lines/boxes, the last line/box encountered is picked several times.

For example, in a 2x3 table, the 4 lines will be [0, 1, 1, 1]. In each line, the boxes will be
[0, 1, 2, 2]. In a 6x5 table, the 4 lines will be [0, 1, 2, 4] and the boxes per line will be
[0, 1, 2, 5].

As you can see, property extraction/application is lossless for tables that are 4x4 or smaller
(and in fact has a bit of redundnacy). For larger tables, we lose any individual cell formatting
for the range [(3,rows - 1) -> (3, cols - 1)]. That formatting is replaced by formatting from
the saved cells:

            0            1            2           3           4           5
        +-----------------------------------------------------------------------+
     0  |   Saved   |  Saved    |  Saved    |           |           |  Saved    |
        +-----------------------------------------------------------------------+
     1  |   Saved   |  Saved    |  Saved    |           |           |  Saved    |
        +-----------------------------------------------------------------------+
     2  |   Saved   |  Saved    |  Saved    |           |           |  Saved    |
        +-----------------------------------------------------------------------+
     3  |           |           |           |           |           |           |
        +-----------------------------------------------------------------------+
     4  |           |           |           |           |           |           |
        +-----------------------------------------------------------------------+
     5  |   Saved   |  Saved    |  Saved    |           |           |  Saved    |
        +-----------+-----------+-----------+-----------+-----------+-----------+

The properties saved are divided into three categories:
    1. Character properties: Font, font size, weight, etc.
    2. Box properties: Box, cell background
    3. Table properties: Properties that are set in the Table->Table Properties dialog.

Character and box properties are stored per cell (and are lossy for tables larger than 4x4). Table
properties are stored per-table, and are lossless.
*/
class SW_DLLPUBLIC SwTableAutoFmt
{
    friend void _FinitCore();       // To destroy default pointer.
    static SwBoxAutoFmt* pDfltBoxAutoFmt;

    OUString m_aName;
    sal_uInt16 nStrResId;

    // Common flags of Calc and Writer.
    bool bInclFont : 1;
    bool bInclJustify : 1;
    bool bInclFrame : 1;
    bool bInclBackground : 1;
    bool bInclValueFormat : 1;

    // Calc specific flags.
    bool bInclWidthHeight : 1;

    SwBoxAutoFmt* aBoxAutoFmt[ 16 ];

    // Writer-specific options
    SvxFmtBreakItem m_aBreak;
    SwFmtPageDesc m_aPageDesc;
    SvxFmtKeepItem m_aKeepWithNextPara;
    sal_uInt16 m_aRepeatHeading;
    bool m_bLayoutSplit;
    bool m_bRowSplit;
    bool m_bCollapsingBorders;
    SvxShadowItem m_aShadow;

public:
    SwTableAutoFmt( const OUString& rName );
    SwTableAutoFmt( const SwTableAutoFmt& rNew );
    ~SwTableAutoFmt();

    SwTableAutoFmt& operator=( const SwTableAutoFmt& rNew );

    void SetBoxFmt( const SwBoxAutoFmt& rNew, sal_uInt8 nPos );
    const SwBoxAutoFmt& GetBoxFmt( sal_uInt8 nPos ) const;

    void SetName( const OUString& rNew ) { m_aName = rNew; nStrResId = USHRT_MAX; }
    OUString GetName() const { return m_aName; }

    enum UpdateFlags { UPDATE_CHAR = 1, UPDATE_BOX = 2, UPDATE_ALL = 3 };
    void UpdateFromSet( sal_uInt8 nPos, const SfxItemSet& rSet,
                                UpdateFlags eFlags, SvNumberFormatter* );
    void UpdateToSet( sal_uInt8 nPos, SfxItemSet& rSet, UpdateFlags eFlags,
                        SvNumberFormatter* ) const ;

    void RestoreTableProperties(SwTable &table) const;
    void StoreTableProperties(const SwTable &table);

    bool IsFont() const         { return bInclFont; }
    bool IsJustify() const      { return bInclJustify; }
    bool IsFrame() const        { return bInclFrame; }
    bool IsBackground() const   { return bInclBackground; }
    bool IsValueFormat() const  { return bInclValueFormat; }

    void SetFont( const bool bNew )         { bInclFont = bNew; }
    void SetJustify( const  bool bNew )     { bInclJustify = bNew; }
    void SetFrame( const bool bNew )        { bInclFrame = bNew; }
    void SetBackground( const bool bNew )   { bInclBackground = bNew; }
    void SetValueFormat( const bool bNew )  { bInclValueFormat = bNew; }
    void SetWidthHeight( const bool bNew )  { bInclWidthHeight = bNew; }

    bool Load( SvStream& rStream, const SwAfVersions& );
    bool Save( SvStream& rStream, sal_uInt16 fileVersion ) const;
};

class SW_DLLPUBLIC SwTableAutoFmtTbl
{
    struct Impl;
    ::boost::scoped_ptr<Impl> m_pImpl;

    SAL_DLLPRIVATE bool Load( SvStream& rStream );
    SAL_DLLPRIVATE bool Save( SvStream& rStream ) const;

public:
    explicit SwTableAutoFmtTbl();
    ~SwTableAutoFmtTbl();

    size_t size() const;
    SwTableAutoFmt const& operator[](size_t i) const;
    SwTableAutoFmt      & operator[](size_t i);
    void InsertAutoFmt(size_t i, SwTableAutoFmt * pFmt);
    void EraseAutoFmt(size_t i);
    SwTableAutoFmt* ReleaseAutoFmt(size_t i);

    bool Load();
    bool Save() const;
};

#endif

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */