1 files changed, 126 insertions, 0 deletions
diff --git a/helpcontent2/source/text/simpress/guide/line_draw.xhp b/helpcontent2/source/text/simpress/guide/line_draw.xhp
new file mode 100644
index 0000000000..2e4cf7e3eb
--- /dev/null
+++ b/helpcontent2/source/text/simpress/guide/line_draw.xhp
@@ -0,0 +1,126 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--***********************************************************************
+ *
+ *  The Contents of this file are made available subject to the terms of
+ *  either of the following licenses
+ *
+ *         - GNU Lesser General Public License Version 2.1
+ *         - Sun Industry Standards Source License Version 1.1
+ *
+ *  Sun Microsystems Inc., October, 2000
+ *
+ *  GNU Lesser General Public License Version 2.1
+ *  =============================================
+ *  Copyright 2000 by Sun Microsystems, Inc.
+ *  901 San Antonio Road, Palo Alto, CA 94303, USA
+ *
+ *  This library is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU Lesser General Public
+ *  License version 2.1, as published by the Free Software Foundation.
+ *
+ *  This library is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public
+ *  License along with this library; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ *  MA  02111-1307  USA
+ *
+ *
+ *  Sun Industry Standards Source License Version 1.1
+ *  =================================================
+ *  The contents of this file are subject to the Sun Industry Standards
+ *  Source License Version 1.1 (the "License"); You may not use this file
+ *  except in compliance with the License. You may obtain a copy of the
+ *  License at http://www.openoffice.org/license.html.
+ *
+ *  Software provided under this License is provided on an "AS IS" basis,
+ *  WITHOUT WARRUNTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
+ *  WITHOUT LIMITATION, WARRUNTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
+ *  MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
+ *  See the License for the specific provisions governing your rights and
+ *  obligations concerning the Software.
+ *
+ *  The Initial Developer of the Original Code is: Sun Microsystems, Inc..
+ *
+ *  Copyright: 2000 by Sun Microsystems, Inc.
+ *
+ *  All Rights Reserved.
+ *
+ *  Contributor(s): _______________________________________
+ *
+ *
+ ************************************************************************-->
+	
+<helpdocument version="1.0">
+<meta>
+<topic id="textsimpressguideline_drawxml" indexer="include" status="PUBLISH">
+<title id="tit" xml-lang="en-US">Drawing Curves</title>
+<filename>/text/simpress/guide/line_draw.xhp</filename>
+</topic>
+<history>
+<created date="2003-10-31T00:00:00">Sun Microsystems, Inc.</created>
+<lastedited date="2004-08-16T15:35:19">FPE: Deleted Screenshot. Cleaned.</lastedited>
+</history>
+</meta>
+<body>
+<bookmark xml-lang="en-US" branch="index" id="bm_id3149377"><bookmark_value>lines; drawing</bookmark_value>
+<bookmark_value>curves; drawing</bookmark_value>
+<bookmark_value>control points;definition</bookmark_value>
+<bookmark_value>corner points</bookmark_value>
+</bookmark>
+<paragraph role="heading" id="hd_id3149377" xml-lang="en-US" level="1" l10n="U" oldref="3"><variable id="line_draw"><link href="text/simpress/guide/line_draw.xhp" name="Drawing Curves">Drawing Curves</link>
+</variable></paragraph>
+<paragraph role="paragraph" id="par_id3148868" xml-lang="en-US" l10n="U" oldref="4">The <emph>Curve</emph> tool 
+<image id="img_id3150205" src="res/commandimagelist/sc_linetoolbox.png" width="5.64mm" height="5.64mm"><alt id="alt_id3150205" xml-lang="en-US">Icon</alt>
+	</image> lets you draw a curved line that consists of one or more line segments. Each Bézier curve segment is defined by two data points (endpoints) and one or two control points (handles) that you can drag to adjust the arc of the curve. A control point is connected to a data point by a control line. Moving a control point pulls the curve towards it, and changes the shape of a curve.</paragraph>
+<paragraph role="paragraph" id="par_id3150210" xml-lang="en-US" l10n="U" oldref="39">A Bézier curve has three types of data points:</paragraph>
+<list type="unordered">
+<listitem>
+<paragraph role="listitem" id="par_id3154766" xml-lang="en-US" l10n="U" oldref="25">A symmetrical data point has the same line curvature on either side, and two control lines that move together as a straight line.</paragraph>
+</listitem>
+<listitem>
+<paragraph role="listitem" id="par_id3149874" xml-lang="en-US" l10n="U" oldref="26">A smooth data point has different line curvatures on either side, and two control lines that move together as a straight line.</paragraph>
+</listitem>
+<listitem>
+<paragraph role="listitem" id="par_id3150435" xml-lang="en-US" l10n="U" oldref="27">A corner data point has one or two control lines and joins different line segments.</paragraph>
+</listitem>
+</list>
+<list type="ordered">
+<listitem>
+<paragraph role="paragraph" id="par_id3155262" xml-lang="en-US" l10n="U" oldref="5">Open the <emph>Curves</emph> floating toolbar, and select the <emph>Curves </emph>tool 
+<image id="img_id3145829" src="res/commandimagelist/sc_bezier_unfilled.png" width="5.64mm" height="5.64mm"><alt id="alt_id3145829" xml-lang="en-US">Icon</alt>
+	</image>.</paragraph>
+</listitem>
+<listitem>
+<paragraph role="paragraph" id="par_id3155928" xml-lang="en-US" l10n="U" oldref="6">Click where you want the curve to start, and drag a short distance in the direction you want the curve to go. To create a straight line segment, hold down <item type="keycode">Shift</item> while you drag.</paragraph>
+</listitem>
+<listitem>
+<paragraph role="paragraph" id="par_id3148390" xml-lang="en-US" l10n="U" oldref="41">Release the mouse.</paragraph>
+</listitem>
+<listitem>
+<paragraph role="paragraph" id="par_id3154865" xml-lang="en-US" l10n="U" oldref="22">Move the pointer to where you want the curve segment to end and do one of the following:</paragraph>
+<paragraph role="paragraph" id="par_id3153919" xml-lang="en-US" l10n="U" oldref="23">Click to draw the curve segment using the current arc.</paragraph>
+<paragraph role="paragraph" id="par_id3149451" xml-lang="en-US" l10n="CHG" oldref="43">Drag in any direction to define an arc for the curve, and then click to set it.</paragraph>
+<paragraph role="paragraph" id="par_id3154641" xml-lang="en-US" l10n="U" oldref="24">If you want to close the shape and continue drawing the curve, hold down <item type="keycode">Alt</item> and click. You can then move your pointer to where you want the curve to continue and draw a line.</paragraph>
+</listitem>
+<listitem>
+<paragraph role="paragraph" id="par_id3150261" xml-lang="en-US" l10n="U" oldref="45">If you want, you can continue to add line segments by clicking and dragging.</paragraph>
+</listitem>
+<listitem>
+<paragraph role="paragraph" id="par_id3151172" xml-lang="en-US" l10n="U" oldref="9">Double-click to finish drawing the line. To create a closed shape, double-click the starting point of the line. </paragraph>
+</listitem>
+</list>
+<paragraph role="tip" id="par_id3150706" xml-lang="en-US" l10n="U" oldref="30">To connect the endpoints of a line, or two different lines, choose <emph>View - Toolbars - Option Bar</emph>, and then click the <emph>Snap to Object Points</emph> icon 
+<image id="img_id3147506" src="res/commandimagelist/sc_snappoints.png" width="4.23mm" height="4.23mm"><alt id="alt_id3147506" xml-lang="en-US">Icon</alt>
+	</image> on the<emph> Option Bar</emph>. Select a line tool, and drag a line from one endpoint to the other. The line snaps to each endpoint. </paragraph>
+<section id="relatedtopics">
+<embed href="text/simpress/guide/line_edit.xhp#line_edit"/>
+<embed href="text/simpress/guide/vectorize.xhp#vectorize"/>
+<embed href="text/simpress/guide/3d_create.xhp#3d_create"/>
+<embed href="text/simpress/guide/text2curve.xhp#text2curve"/>
+</section>
+</body>
+</helpdocument>