Duplicate

+ + +Duplicate +Makes one or more copies of a selected object. + +

- Number of copies - Enter the number of copies you want to make. - Values from selection - - - - - - -

Icon - - - Enters the width and the height values of the selected object in the X axis and the Y axis boxes respectively as well as the fill color of the object in the Start box. The rotation angle of the selected object is not entered. - - - -

- Placement - Sets the position and rotation of a duplicate object with respect to the selected object. - X axis - Enter the horizontal distance between the centers of the selected object and the duplicate object. Positive values shift the duplicate object to the right and negative values shift the duplicate object to the left. - Y axis - Enter the vertical distance between the centers of the selected object and the duplicate object. Positive values shift the duplicate object up and negative values shift the duplicate object down. - Angle - Enter the angle (0 to 359 degrees) by which you want to rotate the duplicate object. Positive values rotate the duplicate object in a clockwise direction and negative values in a counterclockwise direction. - Enlargement - Sets the size of a duplicate object. - Width - Enter the amount by which you want to enlarge or reduce the width of the duplicate object. - Height - Enter the amount by which you want to enlarge or reduce the height of the duplicate object. - Colors - Sets the colors for the selected object and the duplicate object. If you make more than one copy, these colors define the start and end points of a color gradient. - Start - Choose a color for the selected object. - End - Choose a color for the duplicate object. If you are making more than one copy, this color is applied to the last copy. -

- - +

+ +Number of copies +Enter the number of copies you want to make. + +Values from selection + + + + +

{ENTER ALTERNATE DESCRIPTION HERE} + + + +Enters the width and the height values of the selected object in the X axis and the Y axis boxes respectively as well as the fill color of the object in the Start box. The rotation angle of the selected object is not entered. + + +

+ +Placement +Sets the position and rotation of a duplicate object with respect to the selected object. + +X axis +Enter the horizontal distance between the centers of the selected object and the duplicate object. Positive values shift the duplicate object to the right and negative values shift the duplicate object to the left. + +Y axis +Enter the vertical distance between the centers of the selected object and the duplicate object. Positive values shift the duplicate object up and negative values shift the duplicate object down. + +Angle +Enter the angle (0 to 359 degrees) by which you want to rotate the duplicate object. Positive values rotate the duplicate object in a clockwise direction and negative values in a counterclockwise direction. +Enlargement +Sets the size of a duplicate object. + +Width +Enter the amount by which you want to enlarge or reduce the width of the duplicate object. + +Height +Enter the amount by which you want to enlarge or reduce the height of the duplicate object. +Colors +Sets the colors for the selected object and the duplicate object. If you make more than one copy, these colors define the start and end points of a color gradient. + +Start +Choose a color for the selected object. + +End +Choose a color for the duplicate object. If you are making more than one copy, this color is applied to the last copy. +

+ diff --git a/helpcontent2/source/text/simpress/01/04030000m.xhp b/helpcontent2/source/text/simpress/01/04030000m.xhp new file mode 100644 index 0000000000..d299d853e6 --- /dev/null +++ b/helpcontent2/source/text/simpress/01/04030000m.xhp @@ -0,0 +1,58 @@ + + + + + + + + +Rows +/text/simpress/01/04030000m.xhp + + + +

+rows; inserting +inserting; rows + + + +Rows +Inserts a new row above the active cell. The number of rows inserted correspond to the number of rows selected. The existing rows are moved downward. +

+In the context menu of a cell, choose Insert - Rows + +

+ + diff --git a/helpcontent2/source/text/simpress/01/04040000m.xhp b/helpcontent2/source/text/simpress/01/04040000m.xhp new file mode 100644 index 0000000000..7a6cb036f1 --- /dev/null +++ b/helpcontent2/source/text/simpress/01/04040000m.xhp @@ -0,0 +1,58 @@ + + + + + + + + +Columns +/text/simpress/01/04040000m.xhp + + + +

+inserting; columns +columns; inserting + + + +Columns +Inserts a new column to the left of the active cell. The number of columns inserted correspond to the number of columns selected. The existing columns are moved to the right. +

+In the context menu of a cell, choose Insert - Columns + +

+ + diff --git a/helpcontent2/source/text/simpress/01/05090000m.xhp b/helpcontent2/source/text/simpress/01/05090000m.xhp new file mode 100644 index 0000000000..52e66e4f57 --- /dev/null +++ b/helpcontent2/source/text/simpress/01/05090000m.xhp @@ -0,0 +1,59 @@ + + + + + + + + +Format Cells +/text/simpress/01/05090000m.xhp + + + + + + +Format Cells +Specifies the properties of the selected table, for example, fonts, font effects, borders, and background. + +

+On the Table Bar, click Table Properties. +

+Font +

+ + diff --git a/helpcontent2/source/text/simpress/01/05110500m.xhp b/helpcontent2/source/text/simpress/01/05110500m.xhp new file mode 100644 index 0000000000..e2a3ae0460 --- /dev/null +++ b/helpcontent2/source/text/simpress/01/05110500m.xhp @@ -0,0 +1,69 @@ + + + + + + + + +Delete +/text/simpress/01/05110500m.xhp + + + +

+ + + +Delete +Deletes the selected row(s) from the table. + +

+On Table Bar, click + + + + +

Icon + + + +Delete Row + + +

+ +

+ + diff --git a/helpcontent2/source/text/simpress/01/05120500m.xhp b/helpcontent2/source/text/simpress/01/05120500m.xhp new file mode 100644 index 0000000000..b3c34d0389 --- /dev/null +++ b/helpcontent2/source/text/simpress/01/05120500m.xhp @@ -0,0 +1,70 @@ + + + + + + + + +Delete +/text/simpress/01/05120500m.xhp + + + +

+ + + +Delete +Deletes the selected column(s) from the table. + +

+This command is only available if the cursor is in a table. +

+On Table Bar, click + + + + +

Icon + + + +Delete Column + + +

+ +

+ + diff --git a/helpcontent2/source/text/simpress/01/05150000.xhp b/helpcontent2/source/text/simpress/01/05150000.xhp index fd871a47a9..a5485feb6a 100644 --- a/helpcontent2/source/text/simpress/01/05150000.xhp +++ b/helpcontent2/source/text/simpress/01/05150000.xhp @@ -1,7 +1,8 @@ - - - + ************************************************************************ + --> + - - + Dimensioning /text/simpress/01/05150000.xhp - -Sun Microsystems, Inc. -converted from old format - fpe - dimension lines; properties of - + Dimensioning Changes the length, measurement and guide properties of the selected dimension line. @@ -98,6 +96,6 @@ Parallel to line Displays the text parallel to or at 90 degrees to the dimension line. -

diff --git a/helpcontent2/source/text/simpress/01/06100000.xhp b/helpcontent2/source/text/simpress/01/06100000.xhp index d8236d58df..6c85c2ff73 100644 --- a/helpcontent2/source/text/simpress/01/06100000.xhp +++ b/helpcontent2/source/text/simpress/01/06100000.xhp @@ -1,7 +1,8 @@ - - - + ************************************************************************ + --> + + - -Custom Slide Shows + +Custom Slide Shows /text/simpress/01/06100000.xhp - -Sun Microsystems, Inc. -converted from old format - fpe - - - - - -Custom Slide Shows - Defines a custom slide show using slides within the current presentation. You can then pick slides to meet the needs of your audience. You can create as many custom slide shows as you want. -

+ + +Custom Slide Shows +Defines a custom slide show using slides within the current presentation. You can then pick slides to meet the needs of your audience. You can create as many custom slide shows as you want. + +

- Name of the presentation(s) - Lists the custom slide shows that are available. - To create a custom slide show, click New. - Use Custom Slide Show - Runs the custom slide show you selected when you click Start. Otherwise, the entire presentation is shown. - To run a custom slide show: - - - Click the show in the list and then select Use Custom Slide Show. - - - Click Start. - - - New -

- Edit - Add, remove or reorder slides as well as change the name of the selected custom slide show. -

- Copy - Creates a copy of the selected custom slide show. You can modify the name of the show by clicking Edit. - Start - Runs the slide show. Ensure that Use Custom Slide Show is selected if you want to run a custom presentation. -

- +

+ +Name of the presentation(s) +Lists the custom slide shows that are available. +To create a custom slide show, click New. + +Use Custom Slide Show +Runs the custom slide show you selected when you click Start. Otherwise, the entire presentation is shown. +To run a custom slide show: + + +Click the show in the list and then select Use Custom Slide Show. + + +Click Start. + + + +New +

+ +Edit +Add, remove or reorder slides as well as change the name of the selected custom slide show. +

+ +Copy +Creates a copy of the selected custom slide show. You can modify the name of the show by clicking Edit. + +Start +Runs the slide show. Ensure that Use Custom Slide Show is selected if you want to run a custom presentation. +

+ diff --git a/helpcontent2/source/text/simpress/01/makefile.mk b/helpcontent2/source/text/simpress/01/makefile.mk index a56770afc3..4b08f2a41a 100644 --- a/helpcontent2/source/text/simpress/01/makefile.mk +++ b/helpcontent2/source/text/simpress/01/makefile.mk @@ -8,7 +8,7 @@ # # $RCSfile: makefile.mk,v $ # -# $Revision: 1.10 $ +# $Revision: 1.10.4.4 $ # # This file is part of OpenOffice.org. # @@ -78,7 +78,9 @@ XHPFILES = \ 04010000.xhp \ 04020000.xhp \ 04030000.xhp \ + 04030000m.xhp \ 04030100.xhp \ + 04040000m.xhp \ 04080100.xhp \ 04110000.xhp \ 04110100.xhp \ @@ -94,9 +96,12 @@ XHPFILES = \ 04990500.xhp \ 04990600.xhp \ 04990700.xhp \ + 05090000m.xhp \ 05100000.xhp \ + 05110500m.xhp \ 05120000.xhp \ 05120100.xhp \ + 05120500m.xhp \ 05130000.xhp \ 05140000.xhp \ 05150000.xhp \ diff --git a/helpcontent2/source/text/simpress/01/taskpanel.xhp b/helpcontent2/source/text/simpress/01/taskpanel.xhp index 1afee82d8e..2550d2afbe 100755 --- a/helpcontent2/source/text/simpress/01/taskpanel.xhp +++ b/helpcontent2/source/text/simpress/01/taskpanel.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - + Task Pane /text/simpress/01/taskpanel.xhp @@ -46,7 +44,8 @@

task pane -Task Pane + +Task Pane Switches the %PRODUCTNAME Impress task pane on and off.

@@ -58,27 +57,36 @@

-Master Page +Master Page Opens the Master Pages tab page, where you apply a master page (background) to all slides (left-click) or to the selected slides (right-click). -Used in this presentation +Used in this presentation Lists the currently used master pages. -Recently used +Recently used Lists the recently used master pages. -Available for Use +Available for Use Lists all available master pages. -Left-click to apply the master page to all slides. Right-click for a submenu. -Applies the master page to all slides. -Applies the master page or the slide design to the selected slides. + +Left-click to apply the master page to all slides. Right-click for a submenu. + +Applies the master page to all slides. + +Applies the master page or the slide design to the selected slides. -Resizes the preview of the master pages. -Layouts + +Resizes the preview of the master pages. +Layouts Opens the Layouts tab page, where you apply a slide design to the selected slide or slides. -Click to apply a slide design to all selected slides. Right-click for a submenu. -Custom Animation + +Click to apply a slide design to all selected slides. Right-click for a submenu. +Custom Animation Opens the Custom Animation tab page, where you apply effects to the selected objects on a slide. -Slide Transition -Opens the Slide Transition tab page, where you apply transition effects to the selected slides. +Slide Transition +Opens the Slide Transition tab page, where you apply transition effects to the selected slides.Table Design + + +Opens the Table Design. Double-click a preview to insert a new table.Impress: Table Design tab page in task pane. +Draw: Table Design dialog diff --git a/helpcontent2/source/text/simpress/02/10030200.xhp b/helpcontent2/source/text/simpress/02/10030200.xhp index 6d36577b0d..5e7cc7a4f1 100644 --- a/helpcontent2/source/text/simpress/02/10030200.xhp +++ b/helpcontent2/source/text/simpress/02/10030200.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - + Gluepoints Bar /text/simpress/02/10030200.xhp object bars; editing glue points -glue points; editing -editing; glue points Glue Points Bar -Insert or modify the properties of a glue point. A glue point is a custom connection point where you can attach a connector line. By default, %PRODUCTNAME automatically places a connection point at the center of each side of the bounding rectangle for every object you create. +Insert or modify the properties of a gluepoint. A gluepoint is a point where you can attach a connector line. By default, %PRODUCTNAME automatically places a gluepoint at the center of each side of the bounding rectangle for every object you create.

-glue points; inserting -inserting; glue points - -Insert Glue Point -Inserts a glue point where you click in an object. + +Insert Glue Point +Inserts a gluepoint where you click in an object. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Insert Point

+ -Exit Direction Left -Connector attaches to the left edge of the selected glue point. + +Exit Direction Left +Connector attaches to the left edge of the selected gluepoint. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Exit Direction Left

+ -Exit Direction Top -Connector attaches to the top edge of the selected glue point. + +Exit Direction Top +Connector attaches to the top edge of the selected gluepoint. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Exit Direction Top

+ -Exit Direction Right -Connector attaches to the right edge of the selected glue point. + +Exit Direction Right +Connector attaches to the right edge of the selected gluepoint. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Exit Direction Right

+ -Exit Direction Bottom -Connector attaches to the bottom edge of the selected glue point. + +Exit Direction Bottom +Connector attaches to the bottom edge of the selected gluepoint. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Exit Direction Bottom

+ -Glue Point Relative -Maintains the relative position of a selected glue point when you resize an object. + +Glue Point Relative +Maintains the relative position of a selected gluepoint when you resize an object. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Glue Point Relative

+ -Glue Point Horizontal Left + +Glue Point Horizontal Left When the object is resized, the current gluepoint remains fixed to the left edge of the object. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Glue Point Horizontal Left

+ -Glue Point Horizontal Center -When the object is resized, the current glue point remains fixed to the center of the object. + +Glue Point Horizontal Center +When the object is resized, the current gluepoint remains fixed to the center of the object. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Glue Point Horizontal Center

+ -Glue Point Horizontal Right -When the object is resized, the current glue point remains fixed to the right edge of the object. + +Glue Point Horizontal Right +When the object is resized, the current gluepoint remains fixed to the right edge of the object. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Glue Point Horizontal Right

+ -Glue Point Vertical Top -When the object is resized, the current glue point remains fixed to the top edge of the object. + +Glue Point Vertical Top +When the object is resized, the current gluepoint remains fixed to the top edge of the object. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Glue Point Vertical Top

+ -Glue Point Vertical Center -When the object is resized, the current glue point remains fixed to the vertical center of the object. + +Glue Point Vertical Center +When the object is resized, the current gluepoint remains fixed to the vertical center of the object. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Glue Point Vertical Center

+ -Glue Point Vertical Bottom -When the object is resized, the current glue point remains fixed to the bottom edge of the object. + +Glue Point Vertical Bottom +When the object is resized, the current gluepoint remains fixed to the bottom edge of the object. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Glue Point Vertical Bottom

+ diff --git a/helpcontent2/source/text/simpress/02/10080000.xhp b/helpcontent2/source/text/simpress/02/10080000.xhp index 1cba0ebbd1..6a781faf8c 100644 --- a/helpcontent2/source/text/simpress/02/10080000.xhp +++ b/helpcontent2/source/text/simpress/02/10080000.xhp @@ -10,7 +10,7 @@ * OpenOffice.org - a multi-platform office productivity suite * * $RCSfile: 10080000.xhp,v $ - * $Revision: 1.8 $ + * $Revision: 1.8.4.1 $ * * This file is part of OpenOffice.org. * @@ -57,9 +57,7 @@ Curve The Curve icon on the Drawing bar opens the Lines toolbar, where you can add lines and shapes to the current slide.

-If you hold the Shift key down, the movement of the mouse is limited to multiples of 45 degrees. If you hold down the Options -Alt key, the new point will not be connected to the last point. This allows you to create objects that consist of curves that are not connected together. If you draw a smaller object while holding down the Options -Alt key into a larger object that you have not closed yet, the smaller object is subtracted from the larger one, thus appearing as a hole in the larger one. +If you hold the Shift key down, the movement of the mouse is limited to multiples of 45 degrees. If you hold down the OptionsAlt key, the new point will not be connected to the last point. This allows you to create objects that consist of curves that are not connected together. If you draw a smaller object while holding down the OptionsAlt key into a larger object that you have not closed yet, the smaller object is subtracted from the larger one, thus appearing as a hole in the larger one. Closed shapes automatically receive the fill that is displayed in the Area Style/Filling box on Line and Filling bar. @@ -161,8 +159,7 @@ Polygon (45°) -Draws a line composed of a series of straight line segments, that are constrained by angles of 45 degree. Drag to draw a line segment, click to define the endpoint of the line segment, and then drag to draw a new line segment. Double-click to finish drawing the line. To create a closed shape, hold down Options -Alt and double-click. +Draws a line composed of a series of straight line segments, that are constrained by angles of 45 degree. Drag to draw a line segment, click to define the endpoint of the line segment, and then drag to draw a new line segment. Double-click to finish drawing the line. To create a closed shape, hold down OptionsAlt and double-click. diff --git a/helpcontent2/source/text/simpress/02/10100000.xhp b/helpcontent2/source/text/simpress/02/10100000.xhp index cef9a07515..eb7cc6998f 100644 --- a/helpcontent2/source/text/simpress/02/10100000.xhp +++ b/helpcontent2/source/text/simpress/02/10100000.xhp @@ -1,7 +1,8 @@ - - - + ************************************************************************ + --> + - - + Connectors /text/simpress/02/10100000.xhp - -Sun Microsystems, Inc. -converted from old format - fpe -

- + Connectors

- + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Connector @@ -62,7 +60,7 @@ Open the Connectors toolbar, where you can add connectors to objects in the current slide. A connector is a line that joins objects, and remains attached when the objects are moved. If you copy an object with a connector, the connector is also copied.There are four types of connector lines: - + Standard (90-degree angle bends) @@ -77,485 +75,486 @@ -

-When you click a connector and move your mouse pointer over a filled object, or the edge of an unfilled object, connection points appear. A connection point is a fixed point where you can attach a connector line. If you want, you can add a custom connection point, called a glue point, to an object. -To draw a connector line, click a connection point on an object, drag to a connection point on another object, and then release. You can also drag to an empty part of you document and click. The unattached end of the connector is locked in place, until you drag the end to a different location. To detach a connector, drag either end of the connector line to a different location. - +When you click a connector and move your mouse pointer over a filled object, or the edge of an unfilled object, gluepoints appear. A gluepoint is a fixed point where you can attach a connector line. You can add custom gluepoints to an object. +To draw a connector line, click a gluepoint on an object, drag to a gluepoint on another object, and then release. You can also drag to an empty part of you document and click. The unattached end of the connector is locked in place, until you drag the end to a different location. To detach a connector, drag either end of the connector line to a different location. + Connector -Draws a connector with one or more 90-degree angle bends. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a connector with one or more 90-degree angle bends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

- + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Connector

- + Connector Starts with Arrow -Draws a connector with one or more 90-degree angle bends and an arrow at the starting point. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a connector with one or more 90-degree angle bends and an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Connector Starts with Arrow

- + Connector Ends with Arrow -Draws a connector with one or more 90-degree angle bends and an arrow at the endpoint. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a connector with one or more 90-degree angle bends and an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Connector Ends with Arrow

- + Connector with Arrows -Draws a connector with one or more 90-degree angle bends and arrows at both ends. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a connector with one or more 90-degree angle bends and arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Connector with Arrows

- + Connector Starts with Circle -Draws a connector with one or more 90-degree angle bends and a circle at the starting point. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a connector with one or more 90-degree angle bends and a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Connector Starts with Circle

- + Connector Ends with Circle -Draws a connector with one or more 90-degree angle bends and a circle at the endpoint. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a connector with one or more 90-degree angle bends and a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Connector Ends with Circle

- + Connector with Circles -Draws a connector with one or more 90-degree angle bends and circles at both ends. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a connector with one or more 90-degree angle bends and circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Connector with Circles

- + Line Connector -Draws a connector that bends near a connection point. Click a connection point on an object, drag to a connection point on another object, and then release. To adjust the length of the line segment between a bend point and a connection point, click the connector and drag the bend point. +Draws a connector that bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Line Connector

- + Line Connector Starts with Arrow -Draws a connector that starts with an arrow and bends near a connection point. Click a connection point on an object, drag to a connection point on another object, and then release. To adjust the length of the line segment between a bend point and a connection point, click the connector and drag the bend point. +Draws a connector that starts with an arrow and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Line Connector Starts with Arrow

- + Line Connector Ends with Arrow -Draws a connector that ends with an arrow and bends near a connection point. Click a connection point on an object, drag to a connection point on another object, and then release. To adjust the length of the line segment between a bend point and a connection point, click the connector and drag the bend point. +Draws a connector that ends with an arrow and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Line Connector Ends with Arrow

- + Line Connector with Arrows -Draws a connector that bends near a connection point and has arrows at both ends. Click a connection point on an object, drag to a connection point on another object, and then release. To adjust the length of the line segment between a bend point and a connection point, click the connector and drag the bend point. +Draws a connector that bends near a gluepoint and has arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Line Connector with Arrows

- + Line Connector Starts with Circle -Draws a connector that starts with a circle and bends near a connection point. Click a connection point on an object, drag to a connection point on another object, and then release. To adjust the length of the line segment between a bend point and a connection point, click the connector and drag the bend point. +Draws a connector that starts with a circle and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Line Connector Starts with Circle

- + Line Connector Ends with Circle -Draws a connector that ends with a circle and bends near a connection point. Click a connection point on an object, drag to a connection point on another object, and then release. To adjust the length of the line segment between a bend point and a connection point, click the connector and drag the bend point. +Draws a connector that ends with a circle and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Line Connector Ends with Circle

- + Line Connector with Circles -Draws a connector that bends near a connection point and has circles at both ends. Click a connection point on an object, drag to a connection point on another object, and then release. To adjust the length of the line segment between a bend point and a connection point, click the connector and drag the bend point. +Draws a connector that bends near a gluepoint and has circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Line Connector with Circles

- + Straight Connector -Draws a straight line connector. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a straight line connector. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Straight Connector

- + Straight Connector Starts with Arrow -Draws a straight line connector with an arrow at the starting point. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a straight line connector with an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Straight Connector Starts with Arrow

- + Straight Connector Ends with Arrow -Draws a straight line connector with an arrow at the endpoint. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a straight line connector with an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Straight Connector Ends with Arrow

- + Straight Connector with Arrows -Draws a straight line connector with arrows at both ends. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a straight line connector with arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Straight Connector with Arrows

- + Straight Connector Starts with Circle -Draws a straight line connector with a circle at the starting point. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a straight line connector with a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Straight Connector Starts with Circle

- + Straight Connector Ends with Circle -Draws a straight line connector with a circle at the endpoint. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a straight line connector with a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Straight Connector Ends with Circle

- + Straight Connector with Circles -Draws a straight line connector with circles at both ends. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a straight line connector with circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Straight Connector with Circles

- + Curved Connector -Draws a curved line connector. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a curved line connector. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Curved Connector

- + Curved Connector Starts with Arrow -Draws a curved line connector with an arrow at the starting point. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a curved line connector with an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Curved Connector Starts with Arrow

- + Curved Connector Ends with Arrow -Draws a curved line connector with an arrow at the endpoint. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a curved line connector with an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Curved Connector Ends with Arrow

- + Curved Connector with Arrows -Draws a curved line connector with arrows at both ends. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a curved line connector with arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Curved Connector with Arrows

- + Curved Connector Starts with Circle -Draws a curved line connector with a circle at the starting point. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a curved line connector with a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Curved Connector Starts with Circle

- + Curved Connector Ends with Circle -Draws a curved line connector with a circle at the endpoint. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a curved line connector with a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Curved Connector Ends with Circle

- + Curved Connector with Circles -Draws a curved line connector with circles at both ends. Click a connection point on an object, drag to a connection point on another object, and then release. +Draws a curved line connector with circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. - + -

Icon +

{ENTER ALTERNATE DESCRIPTION HERE} - + Curved Connector with Circles

diff --git a/helpcontent2/source/text/simpress/02/13030000.xhp b/helpcontent2/source/text/simpress/02/13030000.xhp index cd825585d9..ffa9ed0d7f 100644 --- a/helpcontent2/source/text/simpress/02/13030000.xhp +++ b/helpcontent2/source/text/simpress/02/13030000.xhp @@ -10,7 +10,7 @@ * OpenOffice.org - a multi-platform office productivity suite * * $RCSfile: 13030000.xhp,v $ - * $Revision: 1.5 $ + * $Revision: 1.5.4.1 $ * * This file is part of OpenOffice.org. * @@ -49,8 +49,7 @@ Allow Effects -Plays a preview of an animation effect that is assigned to an object, when you click the object in the slide. To select an object for editing, hold down the Options -Alt key when you click. +Plays a preview of an animation effect that is assigned to an object, when you click the object in the slide. To select an object for editing, hold down the OptionsAlt key when you click.

diff --git a/helpcontent2/source/text/simpress/02/13040000.xhp b/helpcontent2/source/text/simpress/02/13040000.xhp index 8fe4119bcc..5f36d877fb 100644 --- a/helpcontent2/source/text/simpress/02/13040000.xhp +++ b/helpcontent2/source/text/simpress/02/13040000.xhp @@ -10,7 +10,7 @@ * OpenOffice.org - a multi-platform office productivity suite * * $RCSfile: 13040000.xhp,v $ - * $Revision: 1.6 $ + * $Revision: 1.6.4.1 $ * * This file is part of OpenOffice.org. * @@ -50,8 +50,7 @@ Allow Interaction -Runs a preview of the interaction that is assigned to an object, when you click the object in the slide. To select an object for editing, hold down the Options -Alt key when you click. +Runs a preview of the interaction that is assigned to an object, when you click the object in the slide. To select an object for editing, hold down the OptionsAlt key when you click.

diff --git a/helpcontent2/source/text/simpress/02/makefile.mk b/helpcontent2/source/text/simpress/02/makefile.mk index 85b9e5fd3b..aeaaa92ef5 100644 --- a/helpcontent2/source/text/simpress/02/makefile.mk +++ b/helpcontent2/source/text/simpress/02/makefile.mk @@ -8,7 +8,7 @@ # # $RCSfile: makefile.mk,v $ # -# $Revision: 1.10 $ +# $Revision: 1.10.4.4 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/simpress/04/01020000.xhp b/helpcontent2/source/text/simpress/04/01020000.xhp index 042cb12aa2..5d9230ca60 100755 --- a/helpcontent2/source/text/simpress/04/01020000.xhp +++ b/helpcontent2/source/text/simpress/04/01020000.xhp @@ -12,7 +12,7 @@ * OpenOffice.org - a multi-platform office productivity suite * * $RCSfile: 01020000.xhp,v $ - * $Revision: 1.12 $ + * $Revision: 1.12.4.1 $ * * This file is part of OpenOffice.org. * @@ -196,7 +196,7 @@ - Alt+Page Down +OptionAlt+Page Down Go to next slide without playing effects. @@ -220,7 +220,7 @@ - Alt+Page Up +OptionAlt+Page Up Go to the previous slide without playing effects. @@ -332,8 +332,7 @@ -Shift+Command+Option -Ctrl+Alt+A +Shift+Command+OptionCtrl+Alt+A Ungroup selected group. @@ -452,18 +451,15 @@ -Option -Alt Key +OptionAlt Key -Hold down Option -Alt to draw or resize objects by dragging from the center of the object outward. +Hold down OptionAlt to draw or resize objects by dragging from the center of the object outward. -Option -Alt key+click +OptionAlt key+click Select the object behind the currently selected object. @@ -471,8 +467,7 @@ -Option -Alt+Shift+click +OptionAlt+Shift+click Select the object in front of the currently selected object. diff --git a/helpcontent2/source/text/simpress/04/makefile.mk b/helpcontent2/source/text/simpress/04/makefile.mk index d96e990287..80f3816836 100644 --- a/helpcontent2/source/text/simpress/04/makefile.mk +++ b/helpcontent2/source/text/simpress/04/makefile.mk @@ -8,7 +8,7 @@ # # $RCSfile: makefile.mk,v $ # -# $Revision: 1.8 $ +# $Revision: 1.8.4.4 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/simpress/guide/gluepoints.xhp b/helpcontent2/source/text/simpress/guide/gluepoints.xhp new file mode 100644 index 0000000000..3ac8fba818 --- /dev/null +++ b/helpcontent2/source/text/simpress/guide/gluepoints.xhp @@ -0,0 +1,79 @@ + + + + + + + + +Using Gluepoints +/text/simpress/guide/gluepoints.xhp + + + +glue points;using + +Using Gluepoints + +In Impress and Draw, you can connect each two shapes with a line called a connector. When you draw a connector between shapes, the connector will be attached to a gluepoint on each shape. Each shape has some default gluepoints, and the positions of the default gluepoints depend on the specific shape. You can add your own custom gluepoints to a shape and then attach connectors to the custom gluepoints. +To add and edit gluepoints + + +Do one of the following: + + + + +Click the Glue Point icon on the Drawing toolbar. + + +Choose Edit - Glue Points. + + + + +Click the Insert Glue Point icon on the Gluepoints toolbar. + + +Click inside the shape where you want to add the new gluepoint. +If the shape is filled, you can click anywhere inside the shape. If the shape is unfilled, you can click the border to insert a glue point. Once inserted, you can drag the glue point to another position inside the shape. + + +With the four icons next to the Insert Glue Point icon, you choose the directions which will be permitted for a connector at this gluepoint. You can choose one or more directions for a particular gluepoint. +If the Glue Point Relative icon is active, the gluepoint moves when you resize the object to keep its position relative to the object borders. +If the Glue Point Relative icon is not active, the icons next to it are no longer grayed out. With these icons you can decide where a gluepoint will be placed when the size of the object is changed. +

+ + diff --git a/helpcontent2/source/text/simpress/guide/keyboard.xhp b/helpcontent2/source/text/simpress/guide/keyboard.xhp index fb89a1fc5a..48d2b02ef7 100644 --- a/helpcontent2/source/text/simpress/guide/keyboard.xhp +++ b/helpcontent2/source/text/simpress/guide/keyboard.xhp @@ -11,7 +11,7 @@ * OpenOffice.org - a multi-platform office productivity suite * * $RCSfile: keyboard.xhp,v $ - * $Revision: 1.8 $ + * $Revision: 1.8.4.1 $ * * This file is part of OpenOffice.org. * @@ -63,11 +63,11 @@ Advance to the next slide without playing object animation effects -Alt+PageDown +OptionAlt+PageDown Return to previous slide -Alt+PageUp +OptionAlt+PageUp Go to a specific slide Type the page number of the slide, and then press Enter. diff --git a/helpcontent2/source/text/simpress/guide/main.xhp b/helpcontent2/source/text/simpress/guide/main.xhp index 087aaf34a3..a8af807585 100755 --- a/helpcontent2/source/text/simpress/guide/main.xhp +++ b/helpcontent2/source/text/simpress/guide/main.xhp @@ -1,8 +1,8 @@ - - + + + - - + Instructions for Using $[officename] Impress /text/simpress/guide/main.xhp - -Sun Microsystems, Inc. -converted from old format - fpe - $[officename] Impress instructions @@ -87,6 +83,7 @@

diff --git a/helpcontent2/source/text/simpress/guide/makefile.mk b/helpcontent2/source/text/simpress/guide/makefile.mk index df7d1e5617..0cd15d045b 100644 --- a/helpcontent2/source/text/simpress/guide/makefile.mk +++ b/helpcontent2/source/text/simpress/guide/makefile.mk @@ -8,7 +8,7 @@ # # $RCSfile: makefile.mk,v $ # -# $Revision: 1.10 $ +# $Revision: 1.10.4.4 $ # # This file is part of OpenOffice.org. # @@ -57,6 +57,7 @@ XHPFILES = \ background.xhp \ change_scale.xhp \ footer.xhp \ + gluepoints.xhp \ html_export.xhp \ html_import.xhp \ individual.xhp \ diff --git a/helpcontent2/source/text/simpress/guide/select_object.xhp b/helpcontent2/source/text/simpress/guide/select_object.xhp index 5c8d2dad5a..d7b45299a0 100755 --- a/helpcontent2/source/text/simpress/guide/select_object.xhp +++ b/helpcontent2/source/text/simpress/guide/select_object.xhp @@ -10,7 +10,7 @@ * OpenOffice.org - a multi-platform office productivity suite * * $RCSfile: select_object.xhp,v $ - * $Revision: 1.7 $ + * $Revision: 1.7.4.1 $ * * This file is part of OpenOffice.org. * @@ -52,9 +52,7 @@ -To select an object that is covered by other objects, hold down Option -Alt and click through the objects until you reach the underlying object. To cycle through the objects in reverse order, hold down Option -Alt+Shift when you click. +To select an object that is covered by other objects, hold down OptionAlt and click through the objects until you reach the underlying object. To cycle through the objects in reverse order, hold down OptionAlt+Shift when you click. To select an object that is covered by another object using the keyboard, press Tab to cycle through the objects on the slide. To cycle through the objects in reverse order, press Shift+Tab. diff --git a/helpcontent2/source/text/simpress/guide/table_insert.xhp b/helpcontent2/source/text/simpress/guide/table_insert.xhp index 38b55c517a..dd6f1140ed 100644 --- a/helpcontent2/source/text/simpress/guide/table_insert.xhp +++ b/helpcontent2/source/text/simpress/guide/table_insert.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - + Including Spreadsheets in Slides /text/simpress/guide/table_insert.xhp @@ -50,16 +48,52 @@ Including Spreadsheets in Slides You can apply different methods to insert spreadsheet cells into your Impress slides or Draw pages: - + -Insert a native table - you enter the data into the cells and apply fancy formatting using the Table Design section on the Tasks pane +Insert a native table - you enter the data into the cells and apply fancy formatting using the Table Design section on the Tasks pane. -Insert a new table as an OLE object or insert an existing file as an OLE object - you can specify the link to a file to be a live link to the latest data saved in a spreadsheet file +Insert a new table as an OLE object or insert an existing file as an OLE object - you can specify the link to a file to be a live link to the latest data saved in a spreadsheet file. Insert table dialog - Number of columns -Enter the number of columns for the new table.Insert table dialog - Number of rows -Enter the number of rows for the new table. + +Enter the number of columns for the new table.Insert table dialog - Number of rows + +Enter the number of rows for the new table.Contextmenu of a table in Impress and DrawCell + +Define the vertical alignment of selected or all cell contents. Split or merge cells. + +All selected cells are merged into one cell. + +The selected cell is split into several cells. You see the Split Cells dialog box. + +The cell contents are align at the top of the cells. + +The cell contents are aligned vertically centered in the cells. + +The cell contents are aligned at the bottom of the cells.Row + +Choose commands for the selected or all rows. + +Distributes the height of the selected or all rows to the same size. The height of the table is not changed. + +If currently no cell is selected, all rows will be selected. If currently cells are selected, all rows containing the selected cells will be selected. + +If currently no cell is selected, a new row will be inserted at the bottom of the table. If currently cells are selected, as many new rows as the selection has will be inserted below the selection. + +All rows of the current selection will be deleted.Column + +Choose commands for the selected or all columns. + +Distributes the width of the selected or all columns to the same size. The width of the table is not changed. + +If currently no cell is selected, all columns will be selected. If currently cells are selected, all columns containing the selected cells will be selected. + +If currently no cell is selected, a new column will be inserted at the right border of the table. If currently cells are selected, as many new columns as the selection has will be inserted right of the selection. + +All columns of the current selection will be deleted. +sic +Align the table within the page or slide. Inserting a native table @@ -72,10 +106,15 @@ Double-click the table and enter or paste the data into the cells. -Right-click a cell to open the context menu and choose additional commands regarding the cell's contents. +Select some cell contents and right-click to open the context menu. Choose commands to change the cell's contents, like font size and line spacing. + + +Right-click the table border to open the table's context menu. Use the table's context menu to enter a name and description for the table, or to distribute the rows or columns equally, among other commands. -Right-double-click the table border to open the table's context menu. Use the context menu to insert or delete rows and columns, among other commands. +Select some cells and right-click to open a context menu, where you can insert or delete rows and columns, among other commands. +To select a rectangular area of cells, point to a cell in one corner of the rectangle, hold down the mouse button, and drag the mouse to the opposite corner of the rectangle, then release the mouse button. +To select one cell, point to that cell, hold down the mouse button, and drag the mouse to the next cell and back, then release the mouse button. Inserting a new spreadsheet as an OLE object diff --git a/helpcontent2/source/text/simpress/main0103.xhp b/helpcontent2/source/text/simpress/main0103.xhp index d73eb5a11c..dccda2938f 100755 --- a/helpcontent2/source/text/simpress/main0103.xhp +++ b/helpcontent2/source/text/simpress/main0103.xhp @@ -12,7 +12,7 @@ * OpenOffice.org - a multi-platform office productivity suite * * $RCSfile: main0103.xhp,v $ - * $Revision: 1.9 $ + * $Revision: 1.9.4.1 $ * * This file is part of OpenOffice.org. * @@ -56,7 +56,7 @@

UFI: removed masterlayouts link

diff --git a/helpcontent2/source/text/simpress/main0210.xhp b/helpcontent2/source/text/simpress/main0210.xhp index c9fab0abd9..ca35e20a8b 100755 --- a/helpcontent2/source/text/simpress/main0210.xhp +++ b/helpcontent2/source/text/simpress/main0210.xhp @@ -10,7 +10,7 @@ * OpenOffice.org - a multi-platform office productivity suite * * $RCSfile: main0210.xhp,v $ - * $Revision: 1.8 $ + * $Revision: 1.8.4.2 $ * * This file is part of OpenOffice.org. * @@ -52,10 +52,7 @@ Select To select an object on the current slide, click the Select tool (white arrow) on the Drawing bar, and then click the object. To select more than one object, hold down Shift while you click. -To select an object that is behind another object, hold Option -Alt, and then click the object. To select the next underlying object in the stacking, hold Option -Alt, and then click again. To return the selection to the previously selected object, hold down Shift + Option -Alt, and then click. +To select an object that is behind another object, hold OptionAlt, and then click the object. To select the next underlying object in the stacking, hold OptionAlt, and then click again. To return the selection to the previously selected object, hold down Shift + OptionAlt, and then click. To add text to a selected object, double-click the object and type or enter your text. To remove a selection, click anywhere outside the selected object, or press Escape. @@ -74,7 +71,6 @@

diff --git a/helpcontent2/source/text/simpress/makefile.mk b/helpcontent2/source/text/simpress/makefile.mk index abad1ae946..aa079f444a 100644 --- a/helpcontent2/source/text/simpress/makefile.mk +++ b/helpcontent2/source/text/simpress/makefile.mk @@ -8,7 +8,7 @@ # # $RCSfile: makefile.mk,v $ # -# $Revision: 1.8 $ +# $Revision: 1.8.4.4 $ # # This file is part of OpenOffice.org. # -- cgit