From 4dd442010398f4d280ebaa1de3d066185da00daf Mon Sep 17 00:00:00 2001 From: Ivo Hinkelmann Date: Fri, 12 Jun 2009 18:19:30 +0000 Subject: CWS-TOOLING: integrate CWS hcshared21 2009-05-13 09:49:59 +0200 ufi r271841 : CWS-TOOLING: rebase CWS hcshared21 to trunk@271427 (milestone: DEV300:m47) 2009-04-16 11:01:43 +0200 ufi r270873 : again 2009-03-17 10:19:50 +0100 ufi r269575 : before builds 2009-02-13 16:03:59 +0100 ufi r267726 : CWS-TOOLING: rebase CWS hcshared21 to trunk@267171 (milestone: DEV300:m41) 2009-02-10 10:30:11 +0100 ufi r267539 : vor neuem rebase Versuch 2009-02-03 15:55:58 +0100 ufi r267334 : before rebase 2009-01-06 10:38:41 +0100 ufi r265901 : i97718 --- helpcontent2/helpers/help_hid.lst | 252 ++- helpcontent2/source/auxiliary/sbasic.tree | 2 +- helpcontent2/source/text/sbasic/guide/makefile.mk | 4 +- .../source/text/sbasic/shared/01/makefile.mk | 4 +- .../source/text/sbasic/shared/02/makefile.mk | 4 +- .../source/text/sbasic/shared/03030201.xhp | 77 +- .../source/text/sbasic/shared/03030202.xhp | 77 +- .../source/text/sbasic/shared/03132100.xhp | 70 +- helpcontent2/source/text/sbasic/shared/makefile.mk | 4 +- helpcontent2/source/text/scalc/00/makefile.mk | 4 +- helpcontent2/source/text/scalc/01/04060100.xhp | 87 +- helpcontent2/source/text/scalc/01/04060105.xhp | 227 ++- helpcontent2/source/text/scalc/01/04060106.xhp | 2135 +++++++++++--------- helpcontent2/source/text/scalc/01/04060109.xhp | 988 ++++----- helpcontent2/source/text/scalc/01/04060116.xhp | 890 ++++---- helpcontent2/source/text/scalc/01/04060181.xhp | 700 ++++--- helpcontent2/source/text/scalc/01/04060182.xhp | 468 +++-- helpcontent2/source/text/scalc/01/04060184.xhp | 572 +++--- helpcontent2/source/text/scalc/01/04060185.xhp | 771 +++---- .../source/text/scalc/01/func_datevalue.xhp | 57 +- .../source/text/scalc/01/func_timevalue.xhp | 61 +- helpcontent2/source/text/scalc/01/makefile.mk | 4 +- helpcontent2/source/text/scalc/02/makefile.mk | 4 +- helpcontent2/source/text/scalc/04/makefile.mk | 4 +- helpcontent2/source/text/scalc/05/makefile.mk | 4 +- .../source/text/scalc/guide/cell_enter.xhp | 82 +- .../source/text/scalc/guide/database_sort.xhp | 116 +- helpcontent2/source/text/scalc/guide/makefile.mk | 4 +- .../source/text/scalc/guide/rename_table.xhp | 136 +- .../source/text/scalc/guide/value_with_name.xhp | 145 +- helpcontent2/source/text/scalc/main0104.xhp | 101 +- helpcontent2/source/text/scalc/makefile.mk | 4 +- helpcontent2/source/text/schart/00/makefile.mk | 4 +- helpcontent2/source/text/schart/01/04020000.xhp | 2 +- helpcontent2/source/text/schart/01/04050000.xhp | 2 +- helpcontent2/source/text/schart/01/04050100.xhp | 6 +- helpcontent2/source/text/schart/01/04060000.xhp | 121 +- helpcontent2/source/text/schart/01/makefile.mk | 4 +- helpcontent2/source/text/schart/01/type_pie.xhp | 73 +- helpcontent2/source/text/schart/02/makefile.mk | 4 +- helpcontent2/source/text/schart/04/makefile.mk | 4 +- helpcontent2/source/text/schart/makefile.mk | 4 +- helpcontent2/source/text/sdraw/00/makefile.mk | 4 +- helpcontent2/source/text/sdraw/01/makefile.mk | 4 +- helpcontent2/source/text/sdraw/04/makefile.mk | 4 +- helpcontent2/source/text/sdraw/guide/makefile.mk | 4 +- .../source/text/sdraw/guide/rotate_object.xhp | 4 +- helpcontent2/source/text/sdraw/main0104.xhp | 90 +- helpcontent2/source/text/sdraw/makefile.mk | 4 +- helpcontent2/source/text/shared/00/00000001.xhp | 4 +- helpcontent2/source/text/shared/00/00000401.xhp | 18 +- helpcontent2/source/text/shared/00/00000406.xhp | 6 +- helpcontent2/source/text/shared/00/makefile.mk | 4 +- helpcontent2/source/text/shared/01/02100000.xhp | 212 +- helpcontent2/source/text/shared/01/02110000.xhp | 14 +- helpcontent2/source/text/shared/01/02230401.xhp | 83 +- helpcontent2/source/text/shared/01/04050000.xhp | 105 +- helpcontent2/source/text/shared/01/04150000.xhp | 68 +- helpcontent2/source/text/shared/01/05020200.xhp | 286 +-- helpcontent2/source/text/shared/01/05040100.xhp | 88 +- helpcontent2/source/text/shared/01/05110600m.xhp | 2 +- helpcontent2/source/text/shared/01/05120600.xhp | 2 +- helpcontent2/source/text/shared/01/06040100.xhp | 421 ++-- helpcontent2/source/text/shared/01/06050100.xhp | 69 +- helpcontent2/source/text/shared/01/08060100.xhp | 58 +- .../source/text/shared/01/formatting_mark.xhp | 86 +- helpcontent2/source/text/shared/01/makefile.mk | 4 +- helpcontent2/source/text/shared/01/mediaplayer.xhp | 100 +- helpcontent2/source/text/shared/01/moviesound.xhp | 134 +- .../source/text/shared/01/online_update.xhp | 116 +- helpcontent2/source/text/shared/01/xformsdata.xhp | 110 +- helpcontent2/source/text/shared/02/01170000.xhp | 50 +- helpcontent2/source/text/shared/02/02010000.xhp | 78 +- helpcontent2/source/text/shared/02/02020000.xhp | 89 +- helpcontent2/source/text/shared/02/02140000.xhp | 153 +- helpcontent2/source/text/shared/02/09070000.xhp | 115 +- helpcontent2/source/text/shared/02/14020100.xhp | 70 +- helpcontent2/source/text/shared/02/makefile.mk | 4 +- helpcontent2/source/text/shared/02/paintbrush.xhp | 4 +- helpcontent2/source/text/shared/04/makefile.mk | 4 +- helpcontent2/source/text/shared/05/00000001.xhp | 67 +- helpcontent2/source/text/shared/05/makefile.mk | 4 +- helpcontent2/source/text/shared/07/makefile.mk | 4 +- .../source/text/shared/autokorr/makefile.mk | 4 +- helpcontent2/source/text/shared/autopi/makefile.mk | 4 +- .../text/shared/explorer/database/02010101.xhp | 92 +- .../text/shared/explorer/database/makefile.mk | 5 +- .../shared/explorer/database/migrate_macros.xhp | 71 + .../source/text/shared/guide/autocorr_url.xhp | 97 +- .../source/text/shared/guide/data_enter_sql.xhp | 107 +- .../source/text/shared/guide/data_tabledefine.xhp | 98 +- helpcontent2/source/text/shared/guide/fontwork.xhp | 191 +- .../text/shared/guide/insert_graphic_drawit.xhp | 117 +- .../source/text/shared/guide/labels_database.xhp | 119 +- .../source/text/shared/guide/language_select.xhp | 316 ++- helpcontent2/source/text/shared/guide/makefile.mk | 4 +- .../source/text/shared/guide/numbering_stop.xhp | 132 +- .../source/text/shared/guide/paintbrush.xhp | 2 +- helpcontent2/source/text/shared/makefile.mk | 4 +- .../source/text/shared/optionen/01040400.xhp | 229 ++- .../source/text/shared/optionen/01130200.xhp | 65 +- .../source/text/shared/optionen/makefile.mk | 4 +- .../source/text/shared/optionen/online_update.xhp | 97 +- helpcontent2/source/text/simpress/00/makefile.mk | 4 +- helpcontent2/source/text/simpress/01/02120000.xhp | 2 +- helpcontent2/source/text/simpress/01/makefile.mk | 4 +- helpcontent2/source/text/simpress/02/10030200.xhp | 24 +- helpcontent2/source/text/simpress/02/10100000.xhp | 58 +- helpcontent2/source/text/simpress/02/makefile.mk | 4 +- helpcontent2/source/text/simpress/04/makefile.mk | 4 +- .../source/text/simpress/guide/makefile.mk | 4 +- helpcontent2/source/text/simpress/main0104.xhp | 98 +- helpcontent2/source/text/simpress/main0203.xhp | 131 +- helpcontent2/source/text/simpress/makefile.mk | 4 +- helpcontent2/source/text/smath/00/makefile.mk | 4 +- helpcontent2/source/text/smath/01/03090600.xhp | 634 +++--- helpcontent2/source/text/smath/01/03091506.xhp | 4 +- helpcontent2/source/text/smath/01/makefile.mk | 4 +- helpcontent2/source/text/smath/02/makefile.mk | 4 +- helpcontent2/source/text/smath/04/makefile.mk | 4 +- helpcontent2/source/text/smath/guide/makefile.mk | 4 +- helpcontent2/source/text/smath/makefile.mk | 4 +- helpcontent2/source/text/swriter/00/00000404.xhp | 2 +- helpcontent2/source/text/swriter/00/00000405.xhp | 262 +-- helpcontent2/source/text/swriter/00/makefile.mk | 4 +- helpcontent2/source/text/swriter/01/04070000.xhp | 101 +- helpcontent2/source/text/swriter/01/04090005.xhp | 2 +- helpcontent2/source/text/swriter/01/04210000.xhp | 4 +- helpcontent2/source/text/swriter/01/05040500.xhp | 168 +- helpcontent2/source/text/swriter/01/05060200.xhp | 12 +- helpcontent2/source/text/swriter/01/05100300.xhp | 58 +- helpcontent2/source/text/swriter/01/05140000.xhp | 315 ++- helpcontent2/source/text/swriter/01/makefile.mk | 4 +- helpcontent2/source/text/swriter/02/makefile.mk | 4 +- helpcontent2/source/text/swriter/04/01020000.xhp | 1980 +++++++++--------- helpcontent2/source/text/swriter/04/makefile.mk | 4 +- .../source/text/swriter/guide/arrange_chapters.xhp | 14 +- .../text/swriter/guide/form_letters_main.xhp | 102 +- .../source/text/swriter/guide/hyphen_prevent.xhp | 102 +- .../source/text/swriter/guide/insert_line.xhp | 137 +- helpcontent2/source/text/swriter/guide/makefile.mk | 4 +- .../source/text/swriter/guide/stylist_update.xhp | 90 +- .../source/text/swriter/guide/table_sizing.xhp | 4 +- .../source/text/swriter/guide/text_emphasize.xhp | 69 +- helpcontent2/source/text/swriter/main0104.xhp | 2 +- helpcontent2/source/text/swriter/main0202.xhp | 184 +- helpcontent2/source/text/swriter/makefile.mk | 4 +- helpcontent2/util/sbasic/makefile.mk | 5 +- helpcontent2/util/scalc/makefile.mk | 5 +- helpcontent2/util/schart/makefile.mk | 5 +- helpcontent2/util/sdatabase/makefile.mk | 5 +- helpcontent2/util/sdraw/makefile.mk | 5 +- helpcontent2/util/shared/makefile.mk | 4 +- helpcontent2/util/simpress/makefile.mk | 5 +- helpcontent2/util/smath/makefile.mk | 5 +- helpcontent2/util/swriter/makefile.mk | 5 +- 156 files changed, 9164 insertions(+), 8297 deletions(-) create mode 100755 helpcontent2/source/text/shared/explorer/database/migrate_macros.xhp (limited to 'helpcontent2') diff --git a/helpcontent2/helpers/help_hid.lst b/helpcontent2/helpers/help_hid.lst index 2a40ed6e50..290c0aa5a3 100644 --- a/helpcontent2/helpers/help_hid.lst +++ b/helpcontent2/helpers/help_hid.lst @@ -1,6 +1,7 @@ +,, 0,0, 1,1, -DEV300.m35,010101010101010, +DEV300.m46,010101010101010, DLG_INSERT_PAGES_OBJS,938, DLG_JOIN_TABADD,19214, FID_ADJUST_PRINTZOOM,26652,.uno:AdjustPrintZoom @@ -115,6 +116,7 @@ FN_CNTNT_TO_NEXT_FRAME,20958,.uno:JumpToNextFrame FN_CONVERT_TABLE_TO_TEXT,20532,.uno:ConvertTableToText FN_CONVERT_TEXT_TABLE,20500,.uno:ConvertTableText FN_CONVERT_TEXT_TO_TABLE,20531,.uno:ConvertTextToTable +FN_COPY_HYPERLINK_LOCATION,21840, FN_DEC_INDENT_OFFSET,21751,.uno:DecrementIndentValue FN_DELETE_ALL_NOTES,22502, FN_DELETE_BACK_LINE,20932,.uno:DelToStartOfLine @@ -122,6 +124,7 @@ FN_DELETE_BACK_PARA,20934,.uno:DelToStartOfPara FN_DELETE_BACK_SENT,20928,.uno:DelToStartOfSentence FN_DELETE_BACK_WORD,20930,.uno:DelToStartOfWord FN_DELETE_BOOKMARK,20301,.uno:DeleteBookmark +FN_DELETE_COMMENT,22506, FN_DELETE_LINE,20931,.uno:DelToEndOfLine FN_DELETE_NOTE,22500, FN_DELETE_NOTE_AUTHOR,22501, @@ -363,15 +366,19 @@ FN_QRY_MERGE,20367,.uno:MergeDialog FN_QRY_MERGE_FIELD,20387,.uno:SbaMerge FN_READONLY_SELECTION_MODE,20989,.uno:SelectTextMode FN_REDLINE_ACCEPT,21829,.uno:AcceptTrackedChanges +FN_REDLINE_ACCEPT_DIRECT,21837, FN_REDLINE_COMMENT,21827,.uno:CommentChangeTracking FN_REDLINE_ON,21825,.uno:TrackChanges FN_REDLINE_PROTECT,21823,.uno:ProtectTraceChangeMode +FN_REDLINE_REJECT_DIRECT,21838, FN_REDLINE_SHOW,21826,.uno:ShowTrackedChanges FN_REFRESH_VIEW,20201,.uno:RefreshView FN_REMOVE_CUR_TOX,20655,.uno:RemoveTableOf FN_REMOVE_DIRECT_CHAR_FORMATS,21759, +FN_REMOVE_HYPERLINK,21839, FN_REPAGINATE,20161,.uno:Repaginate FN_REPEAT_SEARCH,20150,.uno:RepeatSearch +FN_REPLY,22507, FN_RULER,20211,.uno:Ruler FN_SAVE_GRAPHIC,21760, FN_SBA_BRW_INSERT,21408,.uno:SwBrwInsert @@ -491,6 +498,9 @@ FN_WORDCOUNT_DIALOG,22298,.uno:WordCountDialog FN_WRAP_ANCHOR_ONLY,20581,.uno:WrapAnchorOnly FN_XFORMS_DESIGN_MODE,22300,.uno:SwitchXFormsDesignMode FN_XFORMS_INIT,21053,.uno:NewXForms +FontWork1TBO,40026, +FontWork2TBO,40027, +HDE_PDF_EXPORT_DLG,33375, HID0_CANCEL,34205, HID0_CREATE,34204, HID0_HELP,34201, @@ -1549,7 +1559,7 @@ HID_DLG_MASTERPASSWORD_CRT,35841, HID_DLG_MASTERPASSWORD_UUI,35840, HID_DLG_MESSBOX,33819, HID_DLG_NAME,33818, -HID_DLG_NEWERVERSIONWARNING,33391, +HID_DLG_NEWERVERSIONWARNING,35848, HID_DLG_NEW_USER_IDX,54858, HID_DLG_OBJECT_NAME,33827, HID_DLG_OBJECT_TITLE_DESC,33828, @@ -1908,6 +1918,26 @@ HID_FORMAT_TABLE,53180, HID_FORMEDT_CONTENT,52815, HID_FORMEDT_INDEX,52817, HID_FORMEDT_USER,52816, +HID_FORMULADLG_FORMULA,64849, +HID_FORMULATAB_FUNCTION,64867, +HID_FORMULATAB_STRUCT,64868, +HID_FORMULA_FAP_BTN_FX1,64857, +HID_FORMULA_FAP_BTN_FX2,64858, +HID_FORMULA_FAP_BTN_FX3,64859, +HID_FORMULA_FAP_BTN_FX4,64860, +HID_FORMULA_FAP_BTN_REF1,64861, +HID_FORMULA_FAP_BTN_REF2,64862, +HID_FORMULA_FAP_BTN_REF3,64863, +HID_FORMULA_FAP_BTN_REF4,64864, +HID_FORMULA_FAP_EDIT1,64853, +HID_FORMULA_FAP_EDIT2,64854, +HID_FORMULA_FAP_EDIT3,64855, +HID_FORMULA_FAP_EDIT4,64856, +HID_FORMULA_FAP_FORMULA,64850, +HID_FORMULA_FAP_PAGE,64852, +HID_FORMULA_FAP_STRUCT,64851, +HID_FORMULA_LB_CATEGORY,64865, +HID_FORMULA_LB_FUNCTION,64866, HID_FORM_NAVIGATOR,38068, HID_FORM_NAVIGATOR_WIN,38069, HID_FRAME_TOOLBOX,54829, @@ -1956,6 +1986,8 @@ HID_FUNC_BETAVERT,58443, HID_FUNC_BINOMVERT,58429, HID_FUNC_BW,57949, HID_FUNC_CHIINV,58452, +HID_FUNC_CHISQDIST,58476, +HID_FUNC_CHISQINV,58477, HID_FUNC_CHITEST,58458, HID_FUNC_CHIVERT,58451, HID_FUNC_CODE,58579, @@ -1999,6 +2031,7 @@ HID_FUNC_FISHERINV,58428, HID_FUNC_FORMEL,58053, HID_FUNC_FTEST,58459, HID_FUNC_FVERT,58449, +HID_FUNC_GAMMA,58478, HID_FUNC_GAMMAINV,58441, HID_FUNC_GAMMALN,58442, HID_FUNC_GAMMAVERT,58440, @@ -2472,6 +2505,7 @@ HID_LINGU_PARA_LANGUAGE,53438, HID_LINGU_REPLACE,53434, HID_LINGU_SPELLING_DLG,53432, HID_LINGU_WORD_LANGUAGE,53437, +HID_LINKDLG_TABLB,34869, HID_LISTWIZARD_CANCEL,34819, HID_LISTWIZARD_FINISH,34820, HID_LISTWIZARD_NEXT,34818, @@ -2545,6 +2579,7 @@ HID_MACRO_GROUP,33155, HID_MACRO_HEADERTABLISTBOX,33380, HID_MACRO_LB_EVENT,33132, HID_MACRO_MACROS,33156, +HID_MACRO_MIGRATION_BACKUP_LOCATION,39152, HID_MAIL_MERGE_CREATE_FROM,54947, HID_MAIL_MERGE_INSERT_FIELDS,54948, HID_MANAGE_STYLES,33074, @@ -2836,6 +2871,7 @@ HID_OPTIONS_GENERAL,33811, HID_OPTIONS_GRID,33816, HID_OPTIONS_JAVA,39996, HID_OPTIONS_JAVA_CLASSPATH,39999, +HID_OPTIONS_JAVA_LIST,39997, HID_OPTIONS_JAVA_PARAMETER,39998, HID_OPTIONS_LINGU,33812, HID_OPTIONS_MAIL,33842, @@ -2937,6 +2973,7 @@ HID_PASSWD,33071, HID_PASSWD_DOC,58994, HID_PASSWD_TABLE,58993, HID_PASSWORD,33824, +HID_PASTE_DLG,34868, HID_POPUP_BRUSH,33839, HID_POPUP_COLOR,33838, HID_POPUP_COLOR_CTRL,34186, @@ -3019,6 +3056,7 @@ HID_PROP_ICONSIZE,37927, HID_PROP_IMAGEPOSITION,38107, HID_PROP_IMAGE_ALIGN,37882, HID_PROP_IMAGE_URL,37830, +HID_PROP_INPUT_REQUIRED,37769, HID_PROP_LABEL,37806, HID_PROP_LEFT,37797, HID_PROP_LINECOLOR,37814, @@ -3115,6 +3153,7 @@ HID_PROP_VISUALEFFECT,38104, HID_PROP_VSCROLL,37820, HID_PROP_WIDTH,37800, HID_PROP_WORDBREAK,37914, +HID_PROP_WRITING_MODE,38109, HID_PROP_XML_DATA_MODEL,37997, HID_PROP_XSD_CALCULATION,38003, HID_PROP_XSD_CONSTRAINT,38002, @@ -3313,6 +3352,7 @@ HID_RPT_PROP_GROUPKEEPTOGETHER,64505, HID_RPT_PROP_INITIALFORMULA,64523, HID_RPT_PROP_KEEPTOGETHER,64479, HID_RPT_PROP_MASTERFIELDS,64486, +HID_RPT_PROP_MIMETYPE,64490, HID_RPT_PROP_MINHEIGHTNEWPAGE,64500, HID_RPT_PROP_NEWROWORCOL,64478, HID_RPT_PROP_PAGEFOOTEROPTION,64507, @@ -3345,7 +3385,6 @@ HID_RULER_DIALOG,52985, HID_SAVE_LABEL_DLG,54919, HID_SCDLG_CONDFORMAT,58930, HID_SCDLG_CONFLICTS,59023, -HID_SCDLG_FORMULA,58929, HID_SCDLG_LINKAREAURL,58998, HID_SCH_ALIGNMENT,63284, HID_SCH_ALIGNMENT_CTR_DIAL,63315, @@ -3390,7 +3429,6 @@ HID_SCH_LEGEND_SHOW,63366, HID_SCH_NUM_OF_LINES,63323, HID_SCH_PB_NUMBERFORMAT,63368, HID_SCH_PB_PERCENT_NUMBERFORMAT,63369, -HID_SCH_SCALE_Y,63287, HID_SCH_SERIES_LIST,63295, HID_SCH_STARTING_ANGLE_DIAL,63374, HID_SCH_STATISTIK_BIGERROR,63349, @@ -3424,6 +3462,9 @@ HID_SCH_TBI_DATA_INSERT_ROW,63303, HID_SCH_TBI_DATA_SWAP_COL,63307, HID_SCH_TBI_DATA_SWAP_ROW,63308, HID_SCH_TBX_DATA,63314, +HID_SCH_TEXTDIRECTION,63395, +HID_SCH_TEXTDIRECTION_EQUATION,63397, +HID_SCH_TEXTDIRECTION_TITLE,63396, HID_SCH_TITLE_MAIN,63360, HID_SCH_TITLE_SECONDARY_X,63372, HID_SCH_TITLE_SECONDARY_Y,63373, @@ -3501,21 +3542,11 @@ HID_SC_DRAW_RENAME,59007, HID_SC_DROPMODE_COPY,58924, HID_SC_DROPMODE_LINK,58923, HID_SC_DROPMODE_URL,58922, -HID_SC_FAP_BTN_FX1,58976, -HID_SC_FAP_BTN_FX2,58977, -HID_SC_FAP_BTN_FX3,58978, -HID_SC_FAP_BTN_FX4,58979, -HID_SC_FAP_BTN_REF1,58980, -HID_SC_FAP_BTN_REF2,58981, -HID_SC_FAP_BTN_REF3,58982, -HID_SC_FAP_BTN_REF4,58983, HID_SC_FAP_EDIT1,58916, HID_SC_FAP_EDIT2,58917, HID_SC_FAP_EDIT3,58918, HID_SC_FAP_EDIT4,58919, -HID_SC_FAP_FORMULA,58984, HID_SC_FAP_PAGE,58915, -HID_SC_FAP_STRUCT,58925, HID_SC_FOOTER_EDIT,58909, HID_SC_GROUP_COLS,58899, HID_SC_GROUP_ROWS,58900, @@ -3640,11 +3671,11 @@ HID_SD_CUSTOMANIMATIONDIALOG_EXIT,59948, HID_SD_CUSTOMANIMATIONDIALOG_MOTIONPATH,59949, HID_SD_CUSTOMANIMATIONPANE_CB_AUTOPREVIEW,59924, HID_SD_CUSTOMANIMATIONPANE_CB_SPEED,59918, -HID_SD_CUSTOMANIMATIONPANE_CHARHEIGHTPROPERTYBOX,59953, -HID_SD_CUSTOMANIMATIONPANE_COLORPROPERTYBOX,59951, +HID_SD_CUSTOMANIMATIONPANE_CHARHEIGHTPROPERTYBOX,59954, +HID_SD_CUSTOMANIMATIONPANE_COLORPROPERTYBOX,59952, HID_SD_CUSTOMANIMATIONPANE_CT_CUSTOM_ANIMATION_LIST,59919, -HID_SD_CUSTOMANIMATIONPANE_FONTPROPERTYBOX,59952, -HID_SD_CUSTOMANIMATIONPANE_FONTSTYLEPROPERTYBOX,59957, +HID_SD_CUSTOMANIMATIONPANE_FONTPROPERTYBOX,59953, +HID_SD_CUSTOMANIMATIONPANE_FONTSTYLEPROPERTYBOX,59958, HID_SD_CUSTOMANIMATIONPANE_LB_PROPERTY,59916, HID_SD_CUSTOMANIMATIONPANE_LB_START,59915, HID_SD_CUSTOMANIMATIONPANE_PB_ADD_EFFECT,59912, @@ -3655,10 +3686,10 @@ HID_SD_CUSTOMANIMATIONPANE_PB_PLAY,59922, HID_SD_CUSTOMANIMATIONPANE_PB_PROPERTY_MORE,59917, HID_SD_CUSTOMANIMATIONPANE_PB_REMOVE_EFFECT,59914, HID_SD_CUSTOMANIMATIONPANE_PB_SLIDE_SHOW,59923, -HID_SD_CUSTOMANIMATIONPANE_PRESETPROPERTYBOX,59950, -HID_SD_CUSTOMANIMATIONPANE_ROTATIONPROPERTYBOX,59954, -HID_SD_CUSTOMANIMATIONPANE_SCALEPROPERTYBOX,59956, -HID_SD_CUSTOMANIMATIONPANE_TRANSPARENCYPROPERTYBOX,59955, +HID_SD_CUSTOMANIMATIONPANE_PRESETPROPERTYBOX,59951, +HID_SD_CUSTOMANIMATIONPANE_ROTATIONPROPERTYBOX,59955, +HID_SD_CUSTOMANIMATIONPANE_SCALEPROPERTYBOX,59957, +HID_SD_CUSTOMANIMATIONPANE_TRANSPARENCYPROPERTYBOX,59956, HID_SD_CUSTOM_ANIMATIONS,59910, HID_SD_DRAW_COMMONTASK_TOOLBOX,59815, HID_SD_DRAW_GRAF_TOOLBOX,59889, @@ -3709,9 +3740,9 @@ HID_SD_OUTLINE_TOOLBOX,59812, HID_SD_PAGEOBJSTLB,59895, HID_SD_PRINT_OPTIONS,59768, HID_SD_RECENT_MASTERS,59907, -HID_SD_RULER_HORIZONTAL,59959, -HID_SD_RULER_VERTICAL,59960, -HID_SD_SLIDESHOW_DISPLAY,59958, +HID_SD_RULER_HORIZONTAL,59960, +HID_SD_RULER_VERTICAL,59961, +HID_SD_SLIDESHOW_DISPLAY,59959, HID_SD_SLIDETRANSITIONPANE_CB_AUTO_PREVIEW,59940, HID_SD_SLIDETRANSITIONPANE_CB_LOOP_SOUND,59933, HID_SD_SLIDETRANSITIONPANE_LB_SLIDE_TRANSITIONS,59930, @@ -3730,7 +3761,7 @@ HID_SD_SLIDE_TOOLBOX,59811, HID_SD_SLIDE_TRANSITIONS,59911, HID_SD_TABBAR_LAYERS,59892, HID_SD_TABBAR_PAGES,59891, -HID_SD_TABLE_DESIGN,59967, +HID_SD_TABLE_DESIGN,59968, HID_SD_TABPAGE_HEADERFOOTER_NOTESHANDOUT,59902, HID_SD_TABPAGE_HEADERFOOTER_SLIDE,59901, HID_SD_TASK_PANE,59904, @@ -4076,6 +4107,7 @@ HID_SPLDLG_BUTTON_CLOSE,39884, HID_SPLDLG_BUTTON_EXPLAIN,39898, HID_SPLDLG_BUTTON_IGNORE,39885, HID_SPLDLG_BUTTON_IGNOREALL,39886, +HID_SPLDLG_BUTTON_IGNORERULE,40076, HID_SPLDLG_CHECKBOX_CHECKGRAMMAR,39899, HID_SPLDLG_EDIT_NEWWORD,39894, HID_SQLERROR_EXCHAIN_ERRORS,38909, @@ -4381,7 +4413,12 @@ ITM_VER_RGHT,22787, MENU_FM_TEXTATTRIBITES_ALIGNMENT,18008, MENU_FM_TEXTATTRIBITES_SPACING,18009, MENU_FM_TEXTATTRIBITES_STYLE,18007, +MSC_Super_ID,123456, +MSC_Super_ID2,1234567, +MSC_Super_ID3,12345678, MSG_QUERY_LOAD_TEMPLATE,2065, +PDF1TBO,867876864, +PDF2TBO,867860480, RID_ENVTOOLBOX,560, RID_MATH_TOOLBOX,20050, RID_MN_FORMAT_STYLE,25031, @@ -4519,6 +4556,7 @@ SID_ATTR_CHAR_LATIN_FONTHEIGHT,10995,.uno:FontHeighLatin SID_ATTR_CHAR_LATIN_LANGUAGE,10996,.uno:LanguageLatin SID_ATTR_CHAR_LATIN_POSTURE,10997,.uno:ItalicLatin SID_ATTR_CHAR_LATIN_WEIGHT,10998,.uno:BoldLatin +SID_ATTR_CHAR_OVERLINE,10068, SID_ATTR_CHAR_POSTURE,10008,.uno:Italic SID_ATTR_CHAR_RELIEF,10920,.uno:CharacterRelief SID_ATTR_CHAR_ROTATED,10910,.uno:CharacterRotation @@ -4580,6 +4618,7 @@ SID_ATTR_PARA_LRSPACE_VERTICAL,10947,.uno:LeftRightParaMargin_Vertical SID_ATTR_PARA_MODEL,10065,.uno:AttributeParaModel SID_ATTR_PARA_NUMRULE,10587,.uno:NumRule SID_ATTR_PARA_ORPHANS,10040,.uno:Orphan +SID_ATTR_PARA_OUTLINE_LEVEL,11092, SID_ATTR_PARA_PAGEBREAK,10037,.uno:Pagebreak SID_ATTR_PARA_PAGENUM,10457,.uno:PageNumber SID_ATTR_PARA_REGISTER,10413,.uno:RegisterTrue @@ -4604,7 +4643,6 @@ SID_AUTOFORMAT,10242,.uno:AutoFormat SID_AUTOHIDE,5932,.uno:AutoHide SID_AUTOPILOTMENU,6381,.uno:AutoPilotMenu SID_AUTOSPELL_CHECK,12021,.uno:SpellOnline -SID_AUTOSPELL_MARKOFF,12022,.uno:HideSpellMark SID_AUTO_CORRECT_DLG,10424,.uno:AutoCorrectDlg SID_AUTO_FILTER,26325,.uno:DataFilterAutoFilter SID_AUTO_OUTLINE,26333,.uno:AutoOutline @@ -4899,6 +4937,7 @@ SID_DB_NEW,12253, SID_DB_NEW_VIEW_SQL,12315, SID_DB_QUERY_PREVIEW,12303, SID_DEC_INDENT,10461,.uno:DecrementIndent +SID_DEFAULTFILENAME,6716, SID_DEFAULTFILEPATH,5571,.uno:DefaultFilePath SID_DEFINE_COLROWNAMERANGES,26629,.uno:DefineLabelRange SID_DEFINE_DBNAME,26320,.uno:DefineDBName @@ -4943,6 +4982,16 @@ SID_DOCINFO_AUTHOR,5593,.uno:Author SID_DOCINFO_COMMENTS,5592,.uno:Comments SID_DOCINFO_KEYWORDS,5591,.uno:Keywords SID_DOCINFO_TITLE,5557,.uno:DocInfoTitle +SID_DOCKWIN_0,9800, +SID_DOCKWIN_1,9801, +SID_DOCKWIN_2,9802, +SID_DOCKWIN_3,9803, +SID_DOCKWIN_4,9804, +SID_DOCKWIN_5,9805, +SID_DOCKWIN_6,9806, +SID_DOCKWIN_7,9807, +SID_DOCKWIN_8,9808, +SID_DOCKWIN_9,9809, SID_DOCPATH,5582,.uno:DocPath SID_DOCTEMPLATE,5538,.uno:SaveAsTemplate SID_DOCTITLE,5583,.uno:Title @@ -5298,6 +5347,7 @@ SID_GRID_USE,27154,.uno:GridUse SID_GRID_VISIBLE,27322,.uno:GridVisible SID_GROUP,10454,.uno:FormatGroup SID_GROUPVIEW,6621, +SID_GROW_FONT_SIZE,11042, SID_HANDLES_DRAFT,27150,.uno:HandlesDraft SID_HANDOUTMODE,27070,.uno:HandoutMode SID_HANDOUT_MASTERPAGE,27349,.uno:HandoutMasterPage @@ -5649,6 +5699,7 @@ SID_PREVIEW_LAST,26499,.uno:LastPage SID_PREVIEW_MARGIN,26504, SID_PREVIEW_NEXT,26496,.uno:NextPage SID_PREVIEW_PREVIOUS,26497,.uno:PreviousPage +SID_PREVIEW_SCALINGFACTOR,26505, SID_PREVIEW_STATE,27329,.uno:PreviewState SID_PREVIEW_WIN,27327,.uno:PreviewWindow SID_PREVIEW_ZOOMIN,26501,.uno:ZoomIn @@ -5685,6 +5736,7 @@ SID_RANGE_TEXTVALUE,26597,.uno:TextValue SID_RANGE_VALUE,26594,.uno:Value SID_READONLY_MODE,10930,.uno:ReadOnlyMode SID_RECENTFILELIST,6697,.uno:RecentFileList +SID_RECHECK_DOCUMENT,11091, SID_RECORDING_FLOATWINDOW,5800,.uno:MacroRecordingFloat SID_RECORDMACRO,6669,.uno:MacroRecorder SID_REDO,5700,.uno:Redo @@ -5799,6 +5851,7 @@ SID_SHOW_IME_STATUS_WINDOW,6680,.uno:ShowImeStatusWindow SID_SHOW_ITEMBROWSER,11001,.uno:ShowItemBrowser SID_SHOW_PROPERTYBROWSER,10943,.uno:ShowPropBrowser SID_SHOW_SLIDE,27440, +SID_SHRINK_FONT_SIZE,11043, SID_SIGNATURE,6643,.uno:Signature SID_SIM_EDITOPTIONS,10438,.uno:SimEditOptions SID_SIM_START,30000,.uno:LaunchStarImage @@ -6101,6 +6154,7 @@ UID_PROP_REMOVE_DATA_TYPE,38017, UID_RPT_PROP_CHARTTYPE_DLG,64529, UID_RPT_PROP_DLG_LINE_STYLE,64508, UID_RPT_PROP_DLG_LINKFIELDS,64530, +UID_RPT_PROP_FORMULA,64531, UID_RPT_REPORTWINDOW,64451, UID_RPT_RPT_APP_VIEW,64449, UID_RPT_RPT_PROP_DLG_AREA,64489, @@ -6234,6 +6288,13 @@ chart2_CheckBox_TP_3D_SCENEGEOMETRY_CBX_RIGHT_ANGLED_AXES,551863298, chart2_CheckBox_TP_AXIS_LABEL_CB_AXIS_LABEL_SCHOW_DESCR,551945217, chart2_CheckBox_TP_AXIS_LABEL_CB_AXIS_LABEL_TEXTBREAK,551945228, chart2_CheckBox_TP_AXIS_LABEL_CB_AXIS_LABEL_TEXTOVERLAP,551945227, +chart2_CheckBox_TP_AXIS_POSITIONS_CB_AXIS_BETWEEN_CATEGORIES,551683073, +chart2_CheckBox_TP_AXIS_POSITIONS_CB_MAJOR_GRID,551683078, +chart2_CheckBox_TP_AXIS_POSITIONS_CB_MINOR_GRID,551683079, +chart2_CheckBox_TP_AXIS_POSITIONS_CB_MINOR_INNER,551683076, +chart2_CheckBox_TP_AXIS_POSITIONS_CB_MINOR_OUTER,551683077, +chart2_CheckBox_TP_AXIS_POSITIONS_CB_TICKS_INNER,551683074, +chart2_CheckBox_TP_AXIS_POSITIONS_CB_TICKS_OUTER,551683075, chart2_CheckBox_TP_CHARTTYPE_CB_3D_LOOK,551781378, chart2_CheckBox_TP_CHARTTYPE_CB_SPLINES,551781380, chart2_CheckBox_TP_CHARTTYPE_CB_STACKED,551781379, @@ -6244,18 +6305,15 @@ chart2_CheckBox_TP_OPTIONS_CB_CONNECTOR,551748617, chart2_CheckBox_TP_POLAROPTIONS_CB_CLOCKWISE,551764993, chart2_CheckBox_TP_RANGECHOOSER_CB_FIRST_COLUMN_ASLABELS,551797762, chart2_CheckBox_TP_RANGECHOOSER_CB_FIRST_ROW_ASLABELS,551797761, -chart2_CheckBox_TP_SCALE_Y_CBX_AUTO_MAX,551666690, -chart2_CheckBox_TP_SCALE_Y_CBX_AUTO_MIN,551666689, -chart2_CheckBox_TP_SCALE_Y_CBX_AUTO_ORIGIN,551666693, -chart2_CheckBox_TP_SCALE_Y_CBX_AUTO_STEP_HELP,551666692, -chart2_CheckBox_TP_SCALE_Y_CBX_AUTO_STEP_MAIN,551666691, -chart2_CheckBox_TP_SCALE_Y_CBX_HELPTICKS_INNER,551666696, -chart2_CheckBox_TP_SCALE_Y_CBX_HELPTICKS_OUTER,551666698, -chart2_CheckBox_TP_SCALE_Y_CBX_LOGARITHM,551666694, -chart2_CheckBox_TP_SCALE_Y_CBX_REVERSE,551666699, -chart2_CheckBox_TP_SCALE_Y_CBX_TICKS_INNER,551666695, -chart2_CheckBox_TP_SCALE_Y_CBX_TICKS_OUTER,551666697, +chart2_CheckBox_TP_SCALE_CBX_AUTO_MAX,551666690, +chart2_CheckBox_TP_SCALE_CBX_AUTO_MIN,551666689, +chart2_CheckBox_TP_SCALE_CBX_AUTO_ORIGIN,551666693, +chart2_CheckBox_TP_SCALE_CBX_AUTO_STEP_HELP,551666692, +chart2_CheckBox_TP_SCALE_CBX_AUTO_STEP_MAIN,551666691, +chart2_CheckBox_TP_SCALE_CBX_LOGARITHM,551666694, +chart2_CheckBox_TP_SCALE_CBX_REVERSE,551666695, chart2_Checkbox_TP_3D_SCENEAPPEARANCE_CB_ROUNDEDEDGE,551879683, +chart2_ComboBox_TP_AXIS_POSITIONS_EDT_CROSSES_OTHER_AXIS_AT_CATEGORY,551686148, chart2_Edit_TP_DATA_SOURCE_EDT_CATEGORIES,551848056, chart2_Edit_TP_DATA_SOURCE_EDT_RANGE,551848016, chart2_Edit_TP_RANGECHOOSER_ED_RANGE,551798785, @@ -6276,7 +6334,12 @@ chart2_ImageButton_TP_RANGECHOOSER_IB_RANGE,551808513, chart2_ListBox_TP_3D_SCENEAPPEARANCE_LB_SCHEME,551882242, chart2_ListBox_TP_3D_SCENEILLUMINATION_LB_AMBIENTLIGHT,551898625, chart2_ListBox_TP_3D_SCENEILLUMINATION_LB_LIGHTSOURCE,551898626, +chart2_ListBox_TP_AXIS_LABEL_LB_AXIS_TEXTDIR,551947796, +chart2_ListBox_TP_AXIS_POSITIONS_LB_CROSSES_OTHER_AXIS_AT,551685633, +chart2_ListBox_TP_AXIS_POSITIONS_LB_PLACE_LABELS,551685634, +chart2_ListBox_TP_AXIS_POSITIONS_LB_PLACE_TICKS,551685638, chart2_ListBox_TP_CHARTTYPE_LB_3D_SCHEME,551783937, +chart2_ListBox_TP_LEGEND_POS_LB_LEGEND_TEXTDIR,551620100, chart2_ListBox_TP_LOCATION_LB_TABLE,551833089, chart2_MetricField_DLG_SPLINE_PROPERTIES_MF_SPLINE_ORDER,1088559617, chart2_MetricField_DLG_SPLINE_PROPERTIES_MF_SPLINE_RESOLUTION,1088559618, @@ -6286,9 +6349,11 @@ chart2_MetricField_TP_3D_SCENEGEOMETRY_MTR_FLD_Y_ROTATION,551868930, chart2_MetricField_TP_3D_SCENEGEOMETRY_MTR_FLD_Z_ROTATION,551868931, chart2_MetricField_TP_OPTIONS_MT_GAP,551754244, chart2_MetricField_TP_OPTIONS_MT_OVERLAP,551754245, -chart2_MetricField_TP_SCALE_Y_MT_STEPHELP,551672330, +chart2_MetricField_TP_SCALE_MT_STEPHELP,551672330, chart2_ModalDialog_DLG_DATA_YERRORBAR,1087537152, chart2_NumericField_TP_POLAROPTIONS_NF_STARTING_ANGLE,551770113, +chart2_PushButton_TP_AXIS_POSITIONS_PB_MAJOR_GRID,551686657, +chart2_PushButton_TP_AXIS_POSITIONS_PB_MINOR_GRID,551686658, chart2_PushButton_TP_CHARTTYPE_PB_SPLINE_DIALOG,551784961, chart2_PushButton_TP_DATA_SOURCE_BTN_ADD,551850526, chart2_PushButton_TP_DATA_SOURCE_BTN_DOWN,551850646, @@ -6310,18 +6375,22 @@ chart2_RadioButton_TP_OPTIONS_RB_CONTINUE_LINE,551748110, chart2_RadioButton_TP_OPTIONS_RB_DONT_PAINT,551748108, chart2_RadioButton_TP_RANGECHOOSER_RB_DATACOLS,551797250, chart2_RadioButton_TP_RANGECHOOSER_RB_DATAROWS,551797249, -chart2_SpinField_TP_SCALE_Y_EDT_MAX,551670786, -chart2_SpinField_TP_SCALE_Y_EDT_MIN,551670787, -chart2_SpinField_TP_SCALE_Y_EDT_ORIGIN,551670789, -chart2_SpinField_TP_SCALE_Y_EDT_STEP_MAIN,551670785, +chart2_SpinField_TP_AXIS_POSITIONS_EDT_AXIS_LABEL_DISTANCE,551687173, +chart2_SpinField_TP_AXIS_POSITIONS_EDT_CROSSES_OTHER_AXIS_AT,551687171, +chart2_SpinField_TP_SCALE_EDT_MAX,551670786, +chart2_SpinField_TP_SCALE_EDT_MIN,551670787, +chart2_SpinField_TP_SCALE_EDT_ORIGIN,551670788, +chart2_SpinField_TP_SCALE_EDT_STEP_MAIN,551670785, chart2_TabPage_TP_3D_SCENEAPPEARANCE,551878656, chart2_TabPage_TP_3D_SCENEILLUMINATION,551895040, +chart2_TabPage_TP_AXIS_POSITIONS,551682048, chart2_TabPage_TP_DATA_SOURCE,551845888, chart2_TabPage_TP_LAYOUT,551731200, chart2_TabPage_TP_LOCATION,551829504, chart2_TabPage_TP_OPTIONS,551747584, chart2_TabPage_TP_POLAROPTIONS,551763968, chart2_TabPage_TP_RANGECHOOSER,551796736, +chart2_TabPage_TP_SCALE,551665664, chart2_TabPage_TP_TRENDLINE,551911424, chart2_TabPage_TP_WIZARD_TITLEANDOBJECTS,551813120, chart2_TabPage_TP_YERRORBAR,551927808, @@ -6331,6 +6400,7 @@ dbaccess_CheckBox_DLG_QRY_JOIN_WND_JOIN_CONTROL_CB_NATURAL,1073759233, dbaccess_CheckBox_DLG_ROWHEIGHT_CB_STANDARD,1388446722, dbaccess_CheckBox_PAGE_ADABAS_CB_SHUTDB,851526657, dbaccess_CheckBox_PAGE_CONNECTION_CB_PASSWORD_REQUIRED,851543041, +dbaccess_CheckBox_PAGE_MYSQL_NATIVE_CB_PASSWORD_REQUIRED,851837953, dbaccess_CheckBox_TAB_WIZ_COPYTABLE_CB_PRIMARY_COLUMN,851641349, dbaccess_ComboBox_DLG_DBASE_INDEXES_CB_TABLES,1388335105, dbaccess_ComboBox_DLG_SAVE_AS_ET_CATALOG,1388498945, @@ -6355,6 +6425,7 @@ dbaccess_Edit_PAGE_ADABAS_ET_CTRLUSERNAME,851527682, dbaccess_Edit_PAGE_ADABAS_ET_HOSTNAME,851527685, dbaccess_Edit_PAGE_CONNECTION_ET_USERNAME,851544065, dbaccess_Edit_PAGE_MYSQL_JDBC_ET_JDBCDRIVERCLASS,851773444, +dbaccess_Edit_PAGE_MYSQL_NATIVE_ET_USERNAME,851838977, dbaccess_Edit_PAGE_ORACLE_JDBC_ET_JDBCDRIVERCLASS,851888132, dbaccess_Edit_PAGE_USERDRIVER_ET_HOSTNAME,851757061, dbaccess_Edit_PAGE_USERDRIVER_ET_OPTIONS,851757059, @@ -6455,6 +6526,7 @@ dbaccess_TabPage_PAGE_CONNECTION,851542016, dbaccess_TabPage_PAGE_DBWIZARD_MYSQL_INTRO,852197376, dbaccess_TabPage_PAGE_GENERATED_VALUES,851804160, dbaccess_TabPage_PAGE_MYSQL_JDBC,851771392, +dbaccess_TabPage_PAGE_MYSQL_NATIVE,851836928, dbaccess_TabPage_PAGE_MYSQL_ODBC,851722240, dbaccess_TabPage_PAGE_ORACLE_JDBC,851886080, dbaccess_TabPage_TAB_WIZ_NAME_MATCHING,851623936, @@ -6698,6 +6770,23 @@ filter_RadioButton_RID_PDF_TAB_SECURITY_RB_PRINT_LOWRES,867893895, filter_RadioButton_RID_PDF_TAB_SECURITY_RB_PRINT_NONE,867893894, filter_RadioButton_RID_PDF_TAB_VPREFER_RB_ALLBOOKMARKLEVELS,867861104, filter_RadioButton_RID_PDF_TAB_VPREFER_RB_VISIBLEBOOKMARKLEVELS,867861105, +formula_CheckBox_RID_FORMULADLG_FORMULA_BTN_MATRIX,2655437835, +formula_CheckBox_RID_FORMULADLG_FORMULA_MODAL_BTN_MATRIX,1581728779, +formula_Edit_RID_FORMULADLG_FORMULA_ED_REF,2655438867, +formula_Edit_RID_FORMULADLG_FORMULA_MODAL_ED_REF,1581729811, +formula_Edit_RID_FORMULATAB_PARAMETER_ED_ARG1,1044842508, +formula_Edit_RID_FORMULATAB_PARAMETER_ED_ARG2,1044842509, +formula_Edit_RID_FORMULATAB_PARAMETER_ED_ARG3,1044842510, +formula_Edit_RID_FORMULATAB_PARAMETER_ED_ARG4,1044842511, +formula_ImageButton_RID_FORMULADLG_FORMULA_MODAL_RB_REF,1581739540, +formula_ImageButton_RID_FORMULADLG_FORMULA_RB_REF,2655448596, +formula_PushButton_RID_FORMULADLG_FORMULA_BTN_BACKWARD,2655441416, +formula_PushButton_RID_FORMULADLG_FORMULA_BTN_FORWARD,2655441417, +formula_PushButton_RID_FORMULADLG_FORMULA_MODAL_BTN_BACKWARD,1581732360, +formula_PushButton_RID_FORMULADLG_FORMULA_MODAL_BTN_FORWARD,1581732361, +formula_TabControl_RID_FORMULADLG_FORMULA_MODAL_TC_FUNCTION,1581727762, +formula_TabControl_RID_FORMULADLG_FORMULA_TC_FUNCTION,2655436818, +formula_TabPage_RID_FORMULATAB_PARAMETER,1044840448, fpicker_CheckBox_DLG_SVT_EXPLORERFILE_CB_AUTO_EXTENSION,1334641706, fpicker_CheckBox_DLG_SVT_EXPLORERFILE_CB_EXPLORERFILE_PASSWORD,1334641705, fpicker_CheckBox_DLG_SVT_EXPLORERFILE_CB_EXPLORERFILE_READONLY,1334641704, @@ -6910,7 +6999,6 @@ sc_CheckBox_RID_SCDLG_FILTER_BTN_DEST_PERS,2567078924, sc_CheckBox_RID_SCDLG_FILTER_BTN_HEADER,2567078916, sc_CheckBox_RID_SCDLG_FILTER_BTN_REGEXP,2567078915, sc_CheckBox_RID_SCDLG_FILTER_BTN_UNIQUE,2567078913, -sc_CheckBox_RID_SCDLG_FORMULA_BTN_MATRIX,2567603211, sc_CheckBox_RID_SCDLG_HIGHLIGHT_CHANGES_CB_HIGHLIGHT,2568963085, sc_CheckBox_RID_SCDLG_HIGHLIGHT_CHANGES_CB_HIGHLIGHT_ACCEPT,2568963078, sc_CheckBox_RID_SCDLG_HIGHLIGHT_CHANGES_CB_HIGHLIGHT_REJECT,2568963079, @@ -7061,7 +7149,6 @@ sc_Edit_RID_SCDLG_FILLSERIES_ED_END_VALUES,1493518385, sc_Edit_RID_SCDLG_FILLSERIES_ED_INCREMENT,1493518375, sc_Edit_RID_SCDLG_FILLSERIES_ED_START_VALUES,1493518388, sc_Edit_RID_SCDLG_FILTER_ED_COPY_AREA,2567079943, -sc_Edit_RID_SCDLG_FORMULA_ED_REF,2567604243, sc_Edit_RID_SCDLG_HIGHLIGHT_CHANGES_ED_ASSIGN,2568964111, sc_Edit_RID_SCDLG_INSERT_TABLE_ED_TABNAME,1493895193, sc_Edit_RID_SCDLG_NAMES_ED_ASSIGN,2567309327, @@ -7092,10 +7179,6 @@ sc_Edit_RID_SCDLG_TABOP_ED_ROWCELL,2567899138, sc_Edit_RID_SCPAGE_CALC_ED_EPS,957253637, sc_Edit_RID_SCPAGE_SORT_OPTIONS_ED_OUTAREA,956450820, sc_Edit_RID_SCPAGE_USERLISTS_ED_COPYFROM,956844035, -sc_Edit_RID_SCTAB_PARAMETER_ED_ARG1,958236684, -sc_Edit_RID_SCTAB_PARAMETER_ED_ARG2,958236685, -sc_Edit_RID_SCTAB_PARAMETER_ED_ARG3,958236686, -sc_Edit_RID_SCTAB_PARAMETER_ED_ARG4,958236687, sc_Edit_TP_VALIDATION_ERROR_EDT_TITLE,548309005, sc_Edit_TP_VALIDATION_INPUTHELP_EDT_TITLE,548292621, sc_Edit_TP_VALIDATION_VALUES_EDT_MAX,548276233, @@ -7118,7 +7201,6 @@ sc_ImageButton_RID_SCDLG_CONSOLIDATE_RB_DATA_AREA,2567532066, sc_ImageButton_RID_SCDLG_CONSOLIDATE_RB_DEST_AREA,2567532076, sc_ImageButton_RID_SCDLG_DBNAMES_RB_DBAREA,2567335438, sc_ImageButton_RID_SCDLG_FILTER_RB_COPY_AREA,2567089672, -sc_ImageButton_RID_SCDLG_FORMULA_RB_REF,2567613972, sc_ImageButton_RID_SCDLG_HIGHLIGHT_CHANGES_RB_ASSIGN,2568973840, sc_ImageButton_RID_SCDLG_NAMES_RB_ASSIGN,2567319056, sc_ImageButton_RID_SCDLG_OPTSOLVER_IB_DELETE1,2569219596, @@ -7145,7 +7227,6 @@ sc_ImageButton_RID_SCDLG_SPEC_FILTER_RB_CRITERIA_AREA,2567106101, sc_ImageButton_RID_SCDLG_TABOP_RB_COLCELL,2567908867, sc_ImageButton_RID_SCDLG_TABOP_RB_FORMULARANGE,2567908865, sc_ImageButton_RID_SCDLG_TABOP_RB_ROWCELL,2567908866, -sc_ImageButton_RID_SCTAB_FUNCTION_IB_FUNCTION,958262789, sc_ListBox_FID_FUNCTION_BOX_CB_CAT,3651276289, sc_ListBox_FID_FUNCTION_BOX_DDLB_FUNC,3651276291, sc_ListBox_FID_FUNCTION_BOX_LB_FUNC,3651276290, @@ -7231,8 +7312,6 @@ sc_ListBox_RID_SCPAGE_SORT_OPTIONS_LB_SORT_USER,956452354, sc_ListBox_RID_SCPAGE_SUBT_OPTIONS_LB_USERDEF,956812835, sc_ListBox_RID_SCPAGE_TABLE_LB_SCALEMODE,957042207, sc_ListBox_RID_SCPAGE_USERLISTS_LB_LISTS,956845569, -sc_ListBox_RID_SCTAB_FUNCTION_LB_CATEGORY,958254595, -sc_ListBox_RID_SCTAB_FUNCTION_LB_FUNCTION,958254596, sc_ListBox_TP_VALIDATION_ERROR_LB_ACTION,548310552, sc_ListBox_TP_VALIDATION_VALUES_LB_ALLOW,548277762, sc_ListBox_TP_VALIDATION_VALUES_LB_VALUE,548277765, @@ -7295,8 +7374,6 @@ sc_PushButton_RID_SCDLG_CONSOLIDATE_BTN_ADD,2567524869, sc_PushButton_RID_SCDLG_CONSOLIDATE_BTN_REMOVE,2567524870, sc_PushButton_RID_SCDLG_DBNAMES_BTN_ADD,2567328259, sc_PushButton_RID_SCDLG_DBNAMES_BTN_REMOVE,2567328260, -sc_PushButton_RID_SCDLG_FORMULA_BTN_BACKWARD,2567606792, -sc_PushButton_RID_SCDLG_FORMULA_BTN_FORWARD,2567606793, sc_PushButton_RID_SCDLG_INSERT_TABLE_BTN_BROWSE,1493897756, sc_PushButton_RID_SCDLG_LINKAREA_BTN_BROWSE,1495372294, sc_PushButton_RID_SCDLG_NAMES_BTN_ADD,2567311875, @@ -7391,11 +7468,7 @@ sc_RadioButton_RID_SCPAGE_SUBT_OPTIONS_BTN_ASCENDING,956809759, sc_RadioButton_RID_SCPAGE_SUBT_OPTIONS_BTN_DESCENDING,956809760, sc_RadioButton_RID_SCPAGE_TABLE_BTN_LEFTRIGHT,957039125, sc_RadioButton_RID_SCPAGE_TABLE_BTN_TOPDOWN,957039124, -sc_TabControl_RID_SCDLG_FORMULA_TC_FUNCTION,2567602194, sc_TabPage_RID_SCPAGE_STAT,957628416, -sc_TabPage_RID_SCTAB_FUNCTION,958251008, -sc_TabPage_RID_SCTAB_PARAMETER,958234624, -sc_TabPage_RID_SCTAB_STRUCT,958267392, sc_TabPage_TP_VALIDATION_ERROR,548306944, sc_TabPage_TP_VALIDATION_INPUTHELP,548290560, sc_TabPage_TP_VALIDATION_VALUES,548274176, @@ -7422,6 +7495,7 @@ sd_CheckBox_DLG_PRESLT_CBX_MASTER_PAGE,1087964161, sd_CheckBox_DLG_PUBLISHING_PAGE2_CONTENT,1085850655, sd_CheckBox_DLG_PUBLISHING_PAGE2_ENDLESS,1085850662, sd_CheckBox_DLG_PUBLISHING_PAGE2_NOTES,1085850656, +sd_CheckBox_DLG_PUBLISHING_PAGE3_HIDDEN_SLIDES,1085850687, sd_CheckBox_DLG_PUBLISHING_PAGE3_SLD_SOUND,1085850685, sd_CheckBox_DLG_PUBLISHING_PAGE4_CREATED,1085850700, sd_CheckBox_DLG_PUBLISHING_PAGE4_DOWNLOAD,1085850699, @@ -7793,7 +7867,6 @@ sfx2_PushButton_DLG_VERSIONS_PB_DELETE,1112691205, sfx2_PushButton_DLG_VERSIONS_PB_OPEN,1112691206, sfx2_PushButton_DLG_VERSIONS_PB_SAVE,1112691202, sfx2_PushButton_DLG_VERSIONS_PB_VIEW,1112691213, -sfx2_PushButton_RID_DLG_NEWER_VERSION_WARNING_PB_UPDATE,1111904781, sfx2_PushButton_RID_DLG_SEARCH_PB_FIND,2187088401, sfx2_PushButton_RID_SFX_TP_MACROASSIGN_PB_ASSIGN,575787523, sfx2_PushButton_RID_SFX_TP_MACROASSIGN_PB_DELETE,575787524, @@ -7992,15 +8065,12 @@ svx_CheckBox_OFA_TP_MISC_CB_FILEDLG,810484791, svx_CheckBox_OFA_TP_MISC_CB_HELPAGENT,810484749, svx_CheckBox_OFA_TP_MISC_CB_PRINTDLG,810484781, svx_CheckBox_OFA_TP_MISC_CB_TOOLTIP,810484747, -svx_CheckBox_OFA_TP_VIEW_CB_3D_DITHERING,810517517, -svx_CheckBox_OFA_TP_VIEW_CB_3D_OPENGL,810517515, -svx_CheckBox_OFA_TP_VIEW_CB_3D_OPENGL_FASTER,810517516, -svx_CheckBox_OFA_TP_VIEW_CB_3D_SHOWFULL,810517518, svx_CheckBox_OFA_TP_VIEW_CB_FONTANTIALIASING,810517567, svx_CheckBox_OFA_TP_VIEW_CB_FONT_HISTORY,810517566, svx_CheckBox_OFA_TP_VIEW_CB_FONT_SHOW,810517564, svx_CheckBox_OFA_TP_VIEW_CB_MENU_ICONS,810517544, svx_CheckBox_OFA_TP_VIEW_CB_SYSTEM_FONT,810517560, +svx_CheckBox_OFA_TP_VIEW_CB_USE_ANTIALIASE,810517573, svx_CheckBox_OFA_TP_VIEW_CB_USE_HARDACCELL,810517572, svx_CheckBox_RID_OFADLG_OPTIONS_TREE_HINT_CB_DISABLE,1346012182, svx_CheckBox_RID_OFAPAGE_AUTOCOMPLETE_OPTIONS_CB_ACTIV,809157753, @@ -8065,6 +8135,7 @@ svx_CheckBox_RID_SVXDLG_SEARCH_CB_JAP_MATCH_FULL_HALF_WIDTH,2311652399, svx_CheckBox_RID_SVXDLG_SEARCH_CB_JAP_SOUNDS_LIKE,2311652400, svx_CheckBox_RID_SVXDLG_SEARCH_CB_LAYOUTS,2311652398, svx_CheckBox_RID_SVXDLG_SEARCH_CB_MATCH_CASE,2311652377, +svx_CheckBox_RID_SVXDLG_SEARCH_CB_NOTES,2311652412, svx_CheckBox_RID_SVXDLG_SEARCH_CB_REGEXP,2311652395, svx_CheckBox_RID_SVXDLG_SEARCH_CB_SELECTIONS,2311652393, svx_CheckBox_RID_SVXDLG_SEARCH_CB_SIMILARITY,2311652396, @@ -8096,7 +8167,7 @@ svx_CheckBox_RID_SVXPAGE_BORDER_CB_MERGEADJACENTBORDERS,700793922, svx_CheckBox_RID_SVXPAGE_BORDER_CB_MERGEWITHNEXT,700793921, svx_CheckBox_RID_SVXPAGE_BORDER_CB_SYNC,700793915, svx_CheckBox_RID_SVXPAGE_CAPTION_CB_LAENGE,703169537, -svx_CheckBox_RID_SVXPAGE_CHAR_EFFECTS_CB_INDIVIDUALWORDS,704644302, +svx_CheckBox_RID_SVXPAGE_CHAR_EFFECTS_CB_INDIVIDUALWORDS,704644327, svx_CheckBox_RID_SVXPAGE_CHAR_POSITION_CB_FIT_TO_LINE,704660794, svx_CheckBox_RID_SVXPAGE_CHAR_POSITION_CB_HIGHLOW,704660786, svx_CheckBox_RID_SVXPAGE_CHAR_POSITION_CB_PAIRKERNING,704660804, @@ -8122,8 +8193,9 @@ svx_CheckBox_RID_SVXPAGE_HEADER_CB_SHARED,701154324, svx_CheckBox_RID_SVXPAGE_HEADER_CB_TURNON,701154314, svx_CheckBox_RID_SVXPAGE_HYPERLINK_INTERNET_CBX_ANONYMOUS,704447499, svx_CheckBox_RID_SVXPAGE_INET_MOZPLUGIN_CB_MOZPLUGIN_CODE,736117762, -svx_CheckBox_RID_SVXPAGE_INET_SECURITY_CB_SEC_RECOMMREADONLY,703988758, -svx_CheckBox_RID_SVXPAGE_INET_SECURITY_CB_SEC_RECORDCHANGES,703988759, +svx_CheckBox_RID_SVXPAGE_INET_SECURITY_CB_SEC_MASTERPASSWORD,703988752, +svx_CheckBox_RID_SVXPAGE_INET_SECURITY_CB_SEC_RECOMMREADONLY,703988759, +svx_CheckBox_RID_SVXPAGE_INET_SECURITY_CB_SEC_RECORDCHANGES,703988760, svx_CheckBox_RID_SVXPAGE_INET_SECURITY_CB_SEC_SAVEPASSWORDS,703988750, svx_CheckBox_RID_SVXPAGE_JSEARCH_OPTIONS_CB_IGNORE_MIDDLE_DOT,714474700, svx_CheckBox_RID_SVXPAGE_JSEARCH_OPTIONS_CB_IGNORE_PUNCTUATION,714474697, @@ -8505,14 +8577,16 @@ svx_ListBox_RID_SVXPAGE_BORDER_LB_SHADOWCOLOR,700796452, svx_ListBox_RID_SVXPAGE_CAPTION_LB_ANSATZ,703172098, svx_ListBox_RID_SVXPAGE_CAPTION_LB_ANSATZ_REL,703172099, svx_ListBox_RID_SVXPAGE_CAPTION_LB_WINKEL,703172097, -svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_EFFECTS2,704646878, -svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_EMPHASIS,704646864, -svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_FONTCOLOR,704646868, -svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_POSITION,704646866, -svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_RELIEF,704646883, -svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_STRIKEOUT,704646861, -svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_UNDERLINE,704646857, -svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_UNDERLINE_COLOR,704646859, +svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_EFFECTS2,704646861, +svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_EMPHASIS,704646898, +svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_FONTCOLOR,704646858, +svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_OVERLINE,704646878, +svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_OVERLINE_COLOR,704646880, +svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_POSITION,704646900, +svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_RELIEF,704646863, +svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_STRIKEOUT,704646882, +svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_UNDERLINE,704646884, +svx_ListBox_RID_SVXPAGE_CHAR_EFFECTS_LB_UNDERLINE_COLOR,704646886, svx_ListBox_RID_SVXPAGE_CHAR_NAME_LB_COLOR2,704630414, svx_ListBox_RID_SVXPAGE_CHAR_NAME_LB_CTL_LANG,704630400, svx_ListBox_RID_SVXPAGE_CHAR_NAME_LB_EAST_LANG,704630390, @@ -8775,7 +8849,6 @@ svx_ModalDialog_RID_SVXDLG_GALLERY_THEMEID,1243627520, svx_ModalDialog_RID_SVXDLG_IMAPURL,1244987392, svx_ModalDialog_RID_SVXDLG_OPT_JAVASCRIPT_DISABLE,1241268224, svx_ModalDialog_RID_SVXDLG_SETFORM,1368735744, -svx_ModalDialog_RID_SVXPAGE_IMPROVEMENT,1242529792, svx_ModalDialog_RID_SVX_DLG_INPUTRECORDNO,1368817664, svx_ModalDialog_RID_SVX_DLG_SHOWGRIDCOLUMNS,1368834048, svx_ModalDialog_RID_SVX_MDLG_EXTRUSION_DEPTH,1237630976, @@ -8950,6 +9023,7 @@ svx_PushButton_RID_SVXDLG_SPELLCHECK_PB_CLOSE,2311852591, svx_PushButton_RID_SVXDLG_SPELLCHECK_PB_EXPLAIN,2311852599, svx_PushButton_RID_SVXDLG_SPELLCHECK_PB_IGNORE,2311852581, svx_PushButton_RID_SVXDLG_SPELLCHECK_PB_IGNOREALL,2311852582, +svx_PushButton_RID_SVXDLG_SPELLCHECK_PB_IGNORERULE,2311852603, svx_PushButton_RID_SVXDLG_SPELLCHECK_PB_OPTIONS,2311852588, svx_PushButton_RID_SVXDLG_SPELLCHECK_PB_UNDO,2311852590, svx_PushButton_RID_SVXDLG_THESAURUS_BTN_LANGUAGE,1238094348, @@ -8990,11 +9064,11 @@ svx_PushButton_RID_SVXPAGE_INET_SEARCH_PB_ADD,703337015, svx_PushButton_RID_SVXPAGE_INET_SEARCH_PB_CHANGE,703337013, svx_PushButton_RID_SVXPAGE_INET_SEARCH_PB_DELETE,703337014, svx_PushButton_RID_SVXPAGE_INET_SEARCH_PB_NEW,703337016, -svx_PushButton_RID_SVXPAGE_INET_SECURITY_PB_SEC_MACROSEC,703992340, -svx_PushButton_RID_SVXPAGE_INET_SECURITY_PB_SEC_MASTERPASSWORD,703992335, -svx_PushButton_RID_SVXPAGE_INET_SECURITY_PB_SEC_PROTRECORDS,703992344, +svx_PushButton_RID_SVXPAGE_INET_SECURITY_PB_SEC_CONNECTIONS,703992335, +svx_PushButton_RID_SVXPAGE_INET_SECURITY_PB_SEC_MACROSEC,703992341, +svx_PushButton_RID_SVXPAGE_INET_SECURITY_PB_SEC_MASTERPASSWORD,703992338, +svx_PushButton_RID_SVXPAGE_INET_SECURITY_PB_SEC_PROTRECORDS,703992345, svx_PushButton_RID_SVXPAGE_INET_SECURITY_PB_SEC_SECURITYOPTIONS,703992332, -svx_PushButton_RID_SVXPAGE_INET_SECURITY_PB_SEC_SHOWPASSWORDS,703992337, svx_PushButton_RID_SVXPAGE_LINEEND_DEF_BTN_ADD,701583873, svx_PushButton_RID_SVXPAGE_LINEEND_DEF_BTN_DELETE,701583875, svx_PushButton_RID_SVXPAGE_LINEEND_DEF_BTN_MODIFY,701583874, @@ -9159,10 +9233,10 @@ svx_TriStateBox_RID_SVXPAGE_AREA_TSB_SCALE,701629953, svx_TriStateBox_RID_SVXPAGE_AREA_TSB_STEPCOUNT,701629955, svx_TriStateBox_RID_SVXPAGE_AREA_TSB_STRETCH,701629957, svx_TriStateBox_RID_SVXPAGE_AREA_TSB_TILE,701629956, -svx_TriStateBox_RID_SVXPAGE_CHAR_EFFECTS_CB_BLINKING,704644833, -svx_TriStateBox_RID_SVXPAGE_CHAR_EFFECTS_CB_CHARHIDDEN,704644836, -svx_TriStateBox_RID_SVXPAGE_CHAR_EFFECTS_CB_OUTLINE,704644831, -svx_TriStateBox_RID_SVXPAGE_CHAR_EFFECTS_CB_SHADOW,704644832, +svx_TriStateBox_RID_SVXPAGE_CHAR_EFFECTS_CB_BLINKING,704644818, +svx_TriStateBox_RID_SVXPAGE_CHAR_EFFECTS_CB_CHARHIDDEN,704644819, +svx_TriStateBox_RID_SVXPAGE_CHAR_EFFECTS_CB_OUTLINE,704644816, +svx_TriStateBox_RID_SVXPAGE_CHAR_EFFECTS_CB_SHADOW,704644817, svx_TriStateBox_RID_SVXPAGE_EXT_PARAGRAPH_BTN_HYPHEN,700827186, svx_TriStateBox_RID_SVXPAGE_EXT_PARAGRAPH_BTN_KEEPTOGETHER,700827203, svx_TriStateBox_RID_SVXPAGE_EXT_PARAGRAPH_BTN_ORPHANS,700827207, @@ -9675,6 +9749,7 @@ sw_ListBox_TP_LINENUMBERING_LB_CHAR_STYLE,878890499, sw_ListBox_TP_LINENUMBERING_LB_FORMAT,878890501, sw_ListBox_TP_LINENUMBERING_LB_POS,878890503, sw_ListBox_TP_NUMPARA_LB_NUMBER_STYLE,878857729, +sw_ListBox_TP_NUMPARA_LB_OUTLINE_LEVEL,878857741, sw_ListBox_TP_NUM_POSITION_LB_ALIGN,878841356, sw_ListBox_TP_NUM_POSITION_LB_ALIGN_2,878841366, sw_ListBox_TP_NUM_POSITION_LB_LABEL_FOLLOWED_BY,878841362, @@ -9988,7 +10063,6 @@ sw_PushButton_TP_TOX_ENTRY_PB_HYPERLINK,879153705, sw_PushButton_TP_TOX_ENTRY_PB_PAGENO,879153703, sw_PushButton_TP_TOX_ENTRY_PB_TAB,879153704, sw_PushButton_TP_TOX_SELECT_PB_ADDSTYLES,879137294, -sw_PushButton_TP_TOX_SELECT_PB_CHAPTERDLG,879137292, sw_PushButton_TP_TOX_STYLES_BT_EDIT_STYLE,879170088, sw_PushButton_TP_TOX_STYLES_BT_STD,879170074, sw_RadioButton_DLG_AP_INSERT_DB_SEL_RB_AS_FIELD,1435042307, @@ -10150,9 +10224,9 @@ uui_Edit_DLG_UUI_LOGIN_ED_LOGIN_USERNAME,1311344666, uui_Edit_DLG_UUI_MASTERPASSWORD_CRT_ED_MASTERPASSWORD_CRT,1311655957, uui_Edit_DLG_UUI_MASTERPASSWORD_CRT_ED_MASTERPASSWORD_REPEAT,1311655959, uui_Edit_DLG_UUI_MASTERPASSWORD_ED_MASTERPASSWORD,1311508501, -uui_Edit_DLG_UUI_PASSWORD_CRT_ED_PASSWORD_CRT,1311688725, -uui_Edit_DLG_UUI_PASSWORD_CRT_ED_PASSWORD_REPEAT,1311688727, -uui_Edit_DLG_UUI_PASSWORD_ED_PASSWORD,1311672341, +uui_Edit_DLG_UUI_PASSWORD_CRT_ED_PASSWORD_CRT,1311688706, +uui_Edit_DLG_UUI_PASSWORD_CRT_ED_PASSWORD_REPEAT,1311688709, +uui_Edit_DLG_UUI_PASSWORD_ED_PASSWORD,1311672322, uui_ListBox_DLG_FILTER_SELECT_LB_FILTERS,1311477279, uui_PushButton_DLG_COOKIES_BTN_COOKIES_CANCEL,1311363614, uui_PushButton_DLG_COOKIES_BTN_COOKIES_OK,1311363615, @@ -10161,6 +10235,7 @@ uui_PushButton_DLG_UUI_SSLWARN_PB_OK,1311773188, uui_PushButton_DLG_UUI_SSLWARN_PB_VIEW__CERTIFICATE,1311773189, uui_PushButton_DLG_UUI_UNKNOWNAUTH_PB_OK,1311740418, uui_PushButton_DLG_UUI_UNKNOWNAUTH_PB_VIEW__CERTIFICATE,1311740419, +uui_PushButton_RID_DLG_NEWER_VERSION_WARNING_PB_UPDATE,1311904269, uui_PushButton_RID_XMLSECDLG_MACROWARN_PB_VIEWSIGNS,1311805956, uui_RadioButton_DLG_COOKIES_RB_INFUTURE_IGNORE,1311359509, uui_RadioButton_DLG_COOKIES_RB_INFUTURE_INTERACTIVE,1311359510, @@ -10189,6 +10264,7 @@ FN_NAME_GROUP,,.uno:NameGroup FN_STAT_HYPERLINKS,,.uno:ExecHyperlinks FontHeight,,.uno: SID_ACTIONMODE,,.uno:ActionMode +SID_AUTOSPELL_MARKOFF,,.uno:HideSpellMark SID_FILL_DRAFT,,.uno:FillDraft SID_FONTWORK_SHAPE_TYPES,,.uno:FontworkShapeTypes SID_GRAPHIC_DRAFT,,.uno:GraphicDraft diff --git a/helpcontent2/source/auxiliary/sbasic.tree b/helpcontent2/source/auxiliary/sbasic.tree index 5866fdbd27..8766b4a7c6 100755 --- a/helpcontent2/source/auxiliary/sbasic.tree +++ b/helpcontent2/source/auxiliary/sbasic.tree @@ -31,7 +31,7 @@ Strings Other Commands - + Abs Function [Runtime] AND Operator [Runtime] Array Function [Runtime] diff --git a/helpcontent2/source/text/sbasic/guide/makefile.mk b/helpcontent2/source/text/sbasic/guide/makefile.mk index 25ae34a978..c8e995a385 100644 --- a/helpcontent2/source/text/sbasic/guide/makefile.mk +++ b/helpcontent2/source/text/sbasic/guide/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.9.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/sbasic/shared/01/makefile.mk b/helpcontent2/source/text/sbasic/shared/01/makefile.mk index 5147038f19..85d604c8ff 100644 --- a/helpcontent2/source/text/sbasic/shared/01/makefile.mk +++ b/helpcontent2/source/text/sbasic/shared/01/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/sbasic/shared/02/makefile.mk b/helpcontent2/source/text/sbasic/shared/02/makefile.mk index 1acf4753bd..78ab5d206a 100644 --- a/helpcontent2/source/text/sbasic/shared/02/makefile.mk +++ b/helpcontent2/source/text/sbasic/shared/02/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.9.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/sbasic/shared/03030201.xhp b/helpcontent2/source/text/sbasic/shared/03030201.xhp index 4d2506906f..3b5c431580 100755 --- a/helpcontent2/source/text/sbasic/shared/03030201.xhp +++ b/helpcontent2/source/text/sbasic/shared/03030201.xhp @@ -1,7 +1,8 @@ - - - + ************************************************************************ + --> + - - -Hour Function [Runtime] -/text/sbasic/shared/03030201.xhp - - -Sun Microsystems, Inc. -converted from old format - fpe - - - -
+ + Hour Function [Runtime] + /text/sbasic/shared/03030201.xhp + + + +
Hour function -Hour Function [Runtime] -Returns the hour from a time value that is generated by the TimeSerial or the TimeValue function. -
-Syntax: -Hour (Number) -Return value: -Integer -Parameters: - -Number: Numeric expression that contains the serial time value that is used to return the hour value. -This function is the opposite of the TimeSerial function. It returns an integer value that represents the hour from a time value that is generated by the TimeSerial or the TimeValue function. For example, the expression -Print Hour(TimeSerial(12:30:41)) -returns the value 12. - - -Example: -Sub ExampleHour -Print "The current hour is " & Hour( Now ) -End Sub - - +Hour Function [Runtime] + Returns the hour from a time value that is generated by the TimeSerial or the TimeValue function. +
+ Syntax: + Hour (Number) + Return value: + Integer + Parameters: + + Number: Numeric expression that contains the serial time value that is used to return the hour value. + This function is the opposite of the TimeSerial function. It returns an integer value that represents the hour from a time value that is generated by the TimeSerial or the TimeValue function. For example, the expression + Print Hour(TimeSerial(12,30,41)) + returns the value 12. + + + Example: + Sub ExampleHour + Print "The current hour is " & Hour( Now ) + End Sub + + \ No newline at end of file diff --git a/helpcontent2/source/text/sbasic/shared/03030202.xhp b/helpcontent2/source/text/sbasic/shared/03030202.xhp index 2366caa49a..c4071dcc4a 100755 --- a/helpcontent2/source/text/sbasic/shared/03030202.xhp +++ b/helpcontent2/source/text/sbasic/shared/03030202.xhp @@ -1,7 +1,8 @@ - - - + ************************************************************************ + --> + - - -Minute Function [Runtime] -/text/sbasic/shared/03030202.xhp - - -Sun Microsystems, Inc. -converted from old format - fpe - - - -
+ + Minute Function [Runtime] + /text/sbasic/shared/03030202.xhp + + + +
Minute function -Minute Function [Runtime] -Returns the minute of the hour that corresponds to the serial time value that is generated by the TimeSerial or the TimeValue function. -
-Syntax: -Minute (Number) -Return value: -Integer -Parameters: - -Number: Numeric expression that contains the serial time value that is used to return the minute value. -This function is the opposite of the TimeSerial function. It returns the minute of the serial time value that is generated by the TimeSerial or the TimeValue function. For example, the expression: -Print Minute(TimeSerial(12:30:41)) -returns the value 30. - - -Example: -Sub ExampleMinute -MsgBox "The current minute is "& Minute(Now)& "." -end sub - - +Minute Function [Runtime] + Returns the minute of the hour that corresponds to the serial time value that is generated by the TimeSerial or the TimeValue function. +
+ Syntax: + Minute (Number) + Return value: + Integer + Parameters: + + Number: Numeric expression that contains the serial time value that is used to return the minute value. + This function is the opposite of the TimeSerial function. It returns the minute of the serial time value that is generated by the TimeSerial or the TimeValue function. For example, the expression: + Print Minute(TimeSerial(12,30,41)) + returns the value 30. + + + Example: + Sub ExampleMinute + MsgBox "The current minute is "& Minute(Now)& "." + end sub + + \ No newline at end of file diff --git a/helpcontent2/source/text/sbasic/shared/03132100.xhp b/helpcontent2/source/text/sbasic/shared/03132100.xhp index 148b5611aa..30ca7b803d 100755 --- a/helpcontent2/source/text/sbasic/shared/03132100.xhp +++ b/helpcontent2/source/text/sbasic/shared/03132100.xhp @@ -1,7 +1,8 @@ - - - + ************************************************************************ + --> + - - -GetGuiType Function [Runtime] -/text/sbasic/shared/03132100.xhp - - -Sun Microsystems, Inc. -converted from old format - fpe - - - -
+ + GetGuiType Function [Runtime] + /text/sbasic/shared/03132100.xhp + + + +
GetGuiType function -GetGuiType Function [Runtime] -Returns a numerical value that specifies the graphical user interface. -
-This runtime function is only provided for downward compatibility to previous versions. The return value is not defined in client-server environments. -Syntax: -GetGUIType() -Return value: -Integer -Return values: -1: Windows -3: Mac OS -4: UNIX -Example: -Sub ExampleEnvironment -MsgBox GetGUIType -End Sub - - +GetGuiType Function [Runtime] + Returns a numerical value that specifies the graphical user interface. +
+ This runtime function is only provided for downward compatibility to previous versions. The return value is not defined in client-server environments. + Syntax: + GetGUIType() + Return value: + Integer + Return values: + 1: Windowsremoved 3: Mac OS, see i95717 +4: UNIX + Example: + Sub ExampleEnvironment + MsgBox GetGUIType + End Sub + + \ No newline at end of file diff --git a/helpcontent2/source/text/sbasic/shared/makefile.mk b/helpcontent2/source/text/sbasic/shared/makefile.mk index 1ae2d0bf4d..36c2eabf2b 100644 --- a/helpcontent2/source/text/sbasic/shared/makefile.mk +++ b/helpcontent2/source/text/sbasic/shared/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.10.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/scalc/00/makefile.mk b/helpcontent2/source/text/scalc/00/makefile.mk index 464c9fdb32..fdf95fb7ac 100644 --- a/helpcontent2/source/text/scalc/00/makefile.mk +++ b/helpcontent2/source/text/scalc/00/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/scalc/01/04060100.xhp b/helpcontent2/source/text/scalc/01/04060100.xhp index 81c4c07bd8..d2a4b0a6be 100755 --- a/helpcontent2/source/text/scalc/01/04060100.xhp +++ b/helpcontent2/source/text/scalc/01/04060100.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 04060100.xhp,v $ - * $Revision: 1.7.4.1 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,44 +35,51 @@ - -Functions by Category -/text/scalc/01/04060100.xhp - - - + + Functions by Category + /text/scalc/01/04060100.xhp + + + functions;listed by category -categories of functions -list of functions + categories of functions + list of functions MW deleted "Calc functions" -Functions by Category -This section describes the functions of $[officename] Calc. The various functions are divided into categories in the Function Wizard. -Database - -Date & Time - -Financial - -Information - -Logical - -Mathematical - -Array - -Statistical - -Spreadsheet - -Text - -Add-in - -Operators are also available. -
-Calc functions in the OpenOffice.org Wiki +Functions by Category + This section describes the functions of $[officename] Calc. The various functions are divided into categories in the Function Wizard. + You can find detailed explanations, illustrations, and examples of Calc functions in the OpenOffice.org Wiki. + Database + + Date & Time + + Financial + + Information + + Logical + + Mathematical + + Array + + Statistical + + Spreadsheet + + Text + + Add-in + + Operators are also available. +
+ Calc functions in the OpenOffice.org Wiki -
- - +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/01/04060105.xhp b/helpcontent2/source/text/scalc/01/04060105.xhp index 9932822ffe..f47de69405 100644 --- a/helpcontent2/source/text/scalc/01/04060105.xhp +++ b/helpcontent2/source/text/scalc/01/04060105.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 04060105.xhp,v $ - * $Revision: 1.9.4.1 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,132 +35,147 @@ - -Logical Functions -/text/scalc/01/04060105.xhp - - - + + Logical Functions + /text/scalc/01/04060105.xhp + + + logical functions -Function Wizard; logical -functions; logical functions + Function Wizard; logical + functions; logical functions -Logical Functions -This category contains the Logical functions. +Logical Functions + This category contains the Logical functions. -
- -
+
+ +
AND function -AND -Returns TRUE if all arguments are TRUE. If one of the elements is FALSE, this function returns the FALSE value. -The arguments are either logical expressions themselves (TRUE, 1<5, 2+3=7, B8<10) that return logical values, or arrays (A1:C3) containing logical values. -When a function expects a single value, but you entered a cell range, then the value from the cell range is taken that is in the same column or row as the formula.UFI: fixed #i18547# -If the entered range is outside of the current column or row of the formula, the function returns the error value #VALUE! -Syntax -AND(LogicalValue1; LogicalValue2 ...LogicalValue30) - -LogicalValue1; LogicalValue2 ...LogicalValue30 are conditions to be checked. All conditions can be either TRUE or FALSE. If a range is entered as a parameter, the function uses the value from the range that is in the current column or row. The result is TRUE if the logical value in all cells within the cell range is TRUE. -Example -The logical values of entries 12<13; 14>12, and 7<6 are to be checked: - -=AND(12<13;14>12;7<6) returns FALSE. - -=AND (FALSE;TRUE) returns FALSE. -
-
+AND + Returns TRUE if all arguments are TRUE. If one of the elements is FALSE, this function returns the FALSE value. + The arguments are either logical expressions themselves (TRUE, 1<5, 2+3=7, B8<10) that return logical values, or arrays (A1:C3) containing logical values. + When a function expects a single value, but you entered a cell range, then the value from the cell range is taken that is in the same column or row as the formula.UFI: fixed #i18547# + If the entered range is outside of the current column or row of the formula, the function returns the error value #VALUE! + Syntax + AND(LogicalValue1; LogicalValue2 ...LogicalValue30) + + LogicalValue1; LogicalValue2 ...LogicalValue30 are conditions to be checked. All conditions can be either TRUE or FALSE. If a range is entered as a parameter, the function uses the value from the range that is in the current column or row. The result is TRUE if the logical value in all cells within the cell range is TRUE. + Example + The logical values of entries 12<13; 14>12, and 7<6 are to be checked: + + =AND(12<13;14>12;7<6) returns FALSE. + + =AND (FALSE;TRUE) returns FALSE. +
+
FALSE function -FALSE -Returns the logical value FALSE. The FALSE() function does not require any arguments, and always returns the logical value FALSE. -Syntax -FALSE() -Example - -=FALSE() returns FALSE - -=NOT(FALSE()) returns TRUE -
-
+FALSE + Returns the logical value FALSE. The FALSE() function does not require any arguments, and always returns the logical value FALSE. + Syntax + FALSE() + Example + + =FALSE() returns FALSE + + =NOT(FALSE()) returns TRUE +
+
IF function -IF -Specifies a logical test to be performed. -Syntax -IF(Test; ThenValue; "OtherwiseValue") - -Test is any value or expression that can be TRUE or FALSE. - -ThenValue (optional) is the value that is returned if the logical test is TRUE. - -OtherwiseValue (optional) is the value that is returned if the logical test is FALSE. - - - -Examples - -=IF(A1>5;100;"too small") If the value in A1 is higher than 5, the value 100 is entered in the current cell; otherwise, the text “too small” (without quotes) is entered. -
-
+IF + Specifies a logical test to be performed. + Syntax + IF(Test; ThenValue; "OtherwiseValue") + + Test is any value or expression that can be TRUE or FALSE. + + ThenValue (optional) is the value that is returned if the logical test is TRUE. + + OtherwiseValue (optional) is the value that is returned if the logical test is FALSE. + + + + Examples + + =IF(A1>5;100;"too small") If the value in A1 is higher than 5, the value 100 is entered in the current cell; otherwise, the text “too small” (without quotes) is entered. +
+
NOT function -NOT -Reverses the logical value. -Syntax -NOT(LogicalValue) - -LogicalValue is any value to be reversed. -Example - -=NOT(A). A=TRUE reverses to A=FALSE. -
-
+NOT + Complements (inverts) a logical value. + Syntax + NOT(LogicalValue) + + LogicalValue is any value to be complemented. + Example + + =NOT(A). If A=TRUE then NOT(A) will evaluate FALSE. +
+
OR function -OR -Returns TRUE if at least one argument is TRUE. This function returns the value FALSE, if all the arguments have the logical value FALSE. -The arguments are either logical expressions themselves (TRUE, 1<5, 2+3=7, B8<10) that return logical values, or arrays (A1:C3) containing logical values. -When a function expects a single value, but you entered a cell range, then the value from the cell range is taken that is in the same column or row as the formula. -If the entered range is outside of the current column or row of the formula, the function returns the error value #VALUE! -Syntax -OR(LogicalValue1; LogicalValue2 ...LogicalValue30) - -LogicalValue1; LogicalValue2 ...LogicalValue30 are conditions to be checked. All conditions can be either TRUE or FALSE. If a range is entered as a parameter, the function uses the value from the range that is in the current column or row.UFI: first try to fix bugtraq 4905779 -Example -The logical values of entries 12<11; 13>22, and 45=45 are to be checked. - -=OR(12<11;13>22;45=45) returns TRUE. - -=OR(FALSE;TRUE) returns TRUE. -
-
+OR + Returns TRUE if at least one argument is TRUE. This function returns the value FALSE, if all the arguments have the logical value FALSE. + The arguments are either logical expressions themselves (TRUE, 1<5, 2+3=7, B8<10) that return logical values, or arrays (A1:C3) containing logical values. + When a function expects a single value, but you entered a cell range, then the value from the cell range is taken that is in the same column or row as the formula. + If the entered range is outside of the current column or row of the formula, the function returns the error value #VALUE! + Syntax + OR(LogicalValue1; LogicalValue2 ...LogicalValue30) + + LogicalValue1; LogicalValue2 ...LogicalValue30 are conditions to be checked. All conditions can be either TRUE or FALSE. If a range is entered as a parameter, the function uses the value from the range that is in the current column or row.UFI: first try to fix bugtraq 4905779 + Example + The logical values of entries 12<11; 13>22, and 45=45 are to be checked. + + =OR(12<11;13>22;45=45) returns TRUE. + + =OR(FALSE;TRUE) returns TRUE. +
+
TRUE function -TRUE -The logical value is set to TRUE. The TRUE() function does not require any arguments, and always returns the logical value TRUE. -Syntax -TRUE() -Example -If A=TRUE and B=FALSE the following examples appear: - -=AND(A;B) returns FALSE - -=OR(A;B) returns TRUE - -=NOT(AND(A;B)) returns TRUE -
+TRUE + The logical value is set to TRUE. The TRUE() function does not require any arguments, and always returns the logical value TRUE. + Syntax + TRUE() + Example + If A=TRUE and B=FALSE the following examples appear: + + =AND(A;B) returns FALSE + + =OR(A;B) returns TRUE + + =NOT(AND(A;B)) returns TRUE +
- -
- - + + + + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/01/04060106.xhp b/helpcontent2/source/text/scalc/01/04060106.xhp index 5e8c9710b6..43ebf2f839 100644 --- a/helpcontent2/source/text/scalc/01/04060106.xhp +++ b/helpcontent2/source/text/scalc/01/04060106.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 04060106.xhp,v $ - * $Revision: 1.15.4.2 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,1243 +35,1432 @@ - -Mathematical Functions -/text/scalc/01/04060106.xhp - - - + + Mathematical Functions + /text/scalc/01/04060106.xhp + + + mathematical functions -Function Wizard; mathematical -functions; mathematical functions -trigonometric functions + Function Wizard; mathematical + functions; mathematical functions + trigonometric functions mw added "trigonometric..." -Mathematical Functions -This category contains the Mathematical functions for Calc. +Mathematical Functions + This category contains the Mathematical functions for Calc. To open the Function Wizard, choose Insert - Function.
ABS function -absolute values -values;absolute + absolute values + values;absolute mw added two entries -ABS -Returns the absolute value of a number. -Syntax -ABS(Number) - -Number is the number whose absolute value is to be calculated. The absolute value of a number is its value without the +/- sign. -Example - -=ABS(-56) returns 56. - -=ABS(12) returns 12. - -=ABS(0) returns 0.see also SIGN -
-
+ABS + Returns the absolute value of a number. + Syntax + ABS(Number) + + Number is the number whose absolute value is to be calculated. The absolute value of a number is its value without the +/- sign. + Example + + =ABS(-56) returns 56. + + =ABS(12) returns 12. + + =ABS(0) returns 0.see also SIGN +
+
COUNTBLANK function -counting;empty cells -empty cells;counting + counting;empty cells + empty cells;counting mw added two entries -COUNTBLANK -Returns the number of empty cells. -Syntax -COUNTBLANK(Range) - Returns the number of empty cells in the cell range Range. -Example - -=COUNTBLANK(A1:B2) returns 4 if cells A1, A2, B1, and B2 are all empty.see also COUNTIF +COUNTBLANK + Returns the number of empty cells. + Syntax + COUNTBLANK(Range) + Returns the number of empty cells in the cell range Range. + Example + + =COUNTBLANK(A1:B2) returns 4 if cells A1, A2, B1, and B2 are all empty.see also COUNTIF
-
+
ACOS function -ACOS -Returns the inverse trigonometric cosine of a number. -Syntax -ACOS(Number) - This function returns the inverse trigonometric cosine of Number, that is the angle (in radians) whose cosine is Number. The angle returned is between 0 and PI. -To return the angle in degrees, use the DEGREES function. -Example - -=ACOS(-1) returns 3.14159265358979 (PI radians) - -=DEGREES(ACOS(0.5)) returns 60. The cosine of 60 degrees is 0.5.see also COS, SIN, TAN, COT, +ACOS + Returns the inverse trigonometric cosine of a number. + Syntax + ACOS(Number) + This function returns the inverse trigonometric cosine of Number, that is the angle (in radians) whose cosine is Number. The angle returned is between 0 and PI. + To return the angle in degrees, use the DEGREES function. + Example + + =ACOS(-1) returns 3.14159265358979 (PI radians) + + =DEGREES(ACOS(0.5)) returns 60. The cosine of 60 degrees is 0.5.see also COS, SIN, TAN, COT, ASIN, ATAN, ATAN2, ACOT
-
+
ACOSH function -ACOSH -Returns the inverse hyperbolic cosine of a number. -Syntax -ACOSH(Number) - This function returns the inverse hyperbolic cosine of Number, that is the number whose hyperbolic cosine is Number. - Number must be greater than or equal to 1. -Example - -=ACOSH(1) returns 0. - -=ACOSH(COSH(4)) returns 4.see also ASINH, ATANH, ACOTH, +ACOSH + Returns the inverse hyperbolic cosine of a number. + Syntax + ACOSH(Number) + This function returns the inverse hyperbolic cosine of Number, that is the number whose hyperbolic cosine is Number. + Number must be greater than or equal to 1. + Example + + =ACOSH(1) returns 0. + + =ACOSH(COSH(4)) returns 4.see also ASINH, ATANH, ACOTH, COSH, SINH, TANH, COTH
-
+
ACOT function -ACOT -Returns the inverse cotangent (the arccotangent) of the given number. -Syntax -ACOT(Number) - This function returns the inverse trigonometric cotangent of Number, that is the angle (in radians) whose cotangent is Number. The angle returned is between 0 and PI. -To return the angle in degrees, use the DEGREES function. -Example - -=ACOT(1) returns 0.785398163397448 (PI/4 radians). - -=DEGREES(ACOT(1)) returns 45. The tangent of 45 degrees is 1. see also COS, SIN, TAN, COT, +ACOT + Returns the inverse cotangent (the arccotangent) of the given number. + Syntax + ACOT(Number) + This function returns the inverse trigonometric cotangent of Number, that is the angle (in radians) whose cotangent is Number. The angle returned is between 0 and PI. + To return the angle in degrees, use the DEGREES function. + Example + + =ACOT(1) returns 0.785398163397448 (PI/4 radians). + + =DEGREES(ACOT(1)) returns 45. The tangent of 45 degrees is 1. see also COS, SIN, TAN, COT, ACOS, ASIN, ATAN, ATAN2
-
+
ACOTH function -ACOTH -Returns the inverse hyperbolic cotangent of the given number. -Syntax -ACOTH(Number) - This function returns the inverse hyperbolic cotangent of Number, that is the number whose hyperbolic cotangent is Number. -An error results if Number is between -1 and 1 inclusive. -Example - -=ACOTH(1.1) returns inverse hyperbolic cotangent of 1.1, approximately 1.52226.see also ACOSH, ASINH, ATANH, +ACOTH + Returns the inverse hyperbolic cotangent of the given number. + Syntax + ACOTH(Number) + This function returns the inverse hyperbolic cotangent of Number, that is the number whose hyperbolic cotangent is Number. + An error results if Number is between -1 and 1 inclusive. + Example + + =ACOTH(1.1) returns inverse hyperbolic cotangent of 1.1, approximately 1.52226.see also ACOSH, ASINH, ATANH, COSH, SINH, TANH, COTH
-
+
ASIN function -ASIN -Returns the inverse trigonometric sine of a number. -Syntax -ASIN(Number) - This function returns the inverse trigonometric sine of Number, that is the angle (in radians) whose sine is Number. The angle returned is between -PI/2 and +PI/2. -To return the angle in degrees, use the DEGREES function. -Example - -=ASIN(0) returns 0. - -=ASIN(1) returns 1.5707963267949 (PI/2 radians). - -=DEGREES(ASIN(0.5)) returns 30. The sine of 30 degrees is 0.5.see also COS, SIN, TAN, COT, +ASIN + Returns the inverse trigonometric sine of a number. + Syntax + ASIN(Number) + This function returns the inverse trigonometric sine of Number, that is the angle (in radians) whose sine is Number. The angle returned is between -PI/2 and +PI/2. + To return the angle in degrees, use the DEGREES function. + Example + + =ASIN(0) returns 0. + + =ASIN(1) returns 1.5707963267949 (PI/2 radians). + + =DEGREES(ASIN(0.5)) returns 30. The sine of 30 degrees is 0.5.see also COS, SIN, TAN, COT, ACOS, ATAN, ATAN2, ACOT
-
+
ASINH function -ASINH -Returns the inverse hyperbolic sine of a number. -Syntax -ASINH(Number) - This function returns the inverse hyperbolic sine of Number, that is the number whose hyperbolic sine is Number. -Example - -=ASINH(-90) returns approximately -5.1929877. - -=ASINH(SINH(4)) returns 4.see also ACOSH, ATANH, ACOTH, +ASINH + Returns the inverse hyperbolic sine of a number. + Syntax + ASINH(Number) + This function returns the inverse hyperbolic sine of Number, that is the number whose hyperbolic sine is Number. + Example + + =ASINH(-90) returns approximately -5.1929877. + + =ASINH(SINH(4)) returns 4.see also ACOSH, ATANH, ACOTH, COSH, SINH, TANH, COTH
-
+
ATAN function -ATAN -Returns the inverse trigonometric tangent of a number. -Syntax -ATAN(Number) - This function returns the inverse trigonometric tangent of Number, that is the angle (in radians) whose tangent is Number. The angle returned is between -PI/2 and PI/2. -To return the angle in degrees, use the DEGREES function. -Example - -=ATAN(1) returns 0.785398163397448 (PI/4 radians). - -=DEGREES(ATAN(1)) returns 45. The tangent of 45 degrees is 1.see also COS, SIN, TAN, COT, +ATAN + Returns the inverse trigonometric tangent of a number. + Syntax + ATAN(Number) + This function returns the inverse trigonometric tangent of Number, that is the angle (in radians) whose tangent is Number. The angle returned is between -PI/2 and PI/2. + To return the angle in degrees, use the DEGREES function. + Example + + =ATAN(1) returns 0.785398163397448 (PI/4 radians). + + =DEGREES(ATAN(1)) returns 45. The tangent of 45 degrees is 1.see also COS, SIN, TAN, COT, ACOS, ASIN, ATAN2, ACOT
-
+
ATAN2 function -ATAN2 -Returns the inverse trigonometric tangent of the specified x and y coordinates. -Syntax -ATAN2(NumberX; NumberY) - -NumberX is the value of the x coordinate. - -NumberY is the value of the y coordinate. -ATAN2 returns the inverse trigonometric tangent, that is, the angle (in radians) between the x-axis and a line from point NumberX, NumberY to the origin. The angle returned is between -PI and PI. -To return the angle in degrees, use the DEGREES function. -Example - -=ATAN2(20;20) returns 0.785398163397448 (PI/4 radians). - -=DEGREES(ATAN2(12.3;12.3)) returns 45. The tangent of 45 degrees is 1.see also COS, SIN, TAN, COT, +ATAN2 + Returns the inverse trigonometric tangent of the specified x and y coordinates. + Syntax + ATAN2(NumberX; NumberY) + + NumberX is the value of the x coordinate. + + NumberY is the value of the y coordinate. + ATAN2 returns the inverse trigonometric tangent, that is, the angle (in radians) between the x-axis and a line from point NumberX, NumberY to the origin. The angle returned is between -PI and PI. + To return the angle in degrees, use the DEGREES function. + Example + + =ATAN2(20;20) returns 0.785398163397448 (PI/4 radians). + + =DEGREES(ATAN2(12.3;12.3)) returns 45. The tangent of 45 degrees is 1.see also COS, SIN, TAN, COT, ACOS, ASIN, ATAN, ACOT
-
+
ATANH function -ATANH -Returns the inverse hyperbolic tangent of a number. -Syntax -ATANH(Number) - This function returns the inverse hyperbolic tangent of Number, that is the number whose hyperbolic tangent is Number. - Number must obey the condition -1 < number < 1. -Example - -=ATANH(0) returns 0.see also ACOSH, ASINH, ACOTH, +ATANH + Returns the inverse hyperbolic tangent of a number. + Syntax + ATANH(Number) + This function returns the inverse hyperbolic tangent of Number, that is the number whose hyperbolic tangent is Number. + Number must obey the condition -1 < number < 1. + Example + + =ATANH(0) returns 0.see also ACOSH, ASINH, ACOTH, COSH, SINH, TANH, COTH
-
+
COS function -COS -Returns the cosine of the given angle (in radians). -Syntax -COS(Number) - Returns the (trigonometric) cosine of Number, the angle in radians. -To return the cosine of an angle in degrees, use the RADIANS function. -Examples - -=COS(PI()/2) returns 0, the cosine of PI/2 radians. - -=COS(RADIANS(60)) returns 0.5, the cosine of 60 degrees.see also SIN, TAN, COT, +COS + Returns the cosine of the given angle (in radians). + Syntax + COS(Number) + Returns the (trigonometric) cosine of Number, the angle in radians. + To return the cosine of an angle in degrees, use the RADIANS function. + Examples + + =COS(PI()/2) returns 0, the cosine of PI/2 radians. + + =COS(RADIANS(60)) returns 0.5, the cosine of 60 degrees.see also SIN, TAN, COT, ACOS, ASIN, ATAN, ATAN2, ACOT
-
+
COSH function -COSH -Returns the hyperbolic cosine of a number. -Syntax -COSH(Number) -Returns the hyperbolic cosine of Number. -Example - -=COSH(0) returns 1, the hyperbolic cosine of 0.see also SINH, TANH, COTH, +COSH + Returns the hyperbolic cosine of a number. + Syntax + COSH(Number) + Returns the hyperbolic cosine of Number. + Example + + =COSH(0) returns 1, the hyperbolic cosine of 0.see also SINH, TANH, COTH, ACOSH, ASINH, ATANH, ACOTH,
-
+
COT function -COT -Returns the cotangent of the given angle (in radians). -Syntax -COT(Number) - Returns the (trigonometric) cotangent of Number, the angle in radians. -To return the cotangent of an angle in degrees, use the RADIANS function. -The cotangent of an angle is equivalent to 1 divided by the tangent of that angle. -Examples: - -=COT(PI()/4) returns 1, the cotangent of PI/4 radians. - -=COT(RADIANS(45)) returns 1, the cotangent of 45 degrees.see also COS, SIN, TAN, +COT + Returns the cotangent of the given angle (in radians). + Syntax + COT(Number) + Returns the (trigonometric) cotangent of Number, the angle in radians. + To return the cotangent of an angle in degrees, use the RADIANS function. + The cotangent of an angle is equivalent to 1 divided by the tangent of that angle. + Examples: + + =COT(PI()/4) returns 1, the cotangent of PI/4 radians. + + =COT(RADIANS(45)) returns 1, the cotangent of 45 degrees.see also COS, SIN, TAN, ACOS, ASIN, ATAN, ATAN2, ACOT
-
+
COTH function -COTH -Returns the hyperbolic cotangent of a given number (angle). -Syntax -COTH(Number) - Returns the hyperbolic cotangent of Number. -Example - -=COTH(1) returns the hyperbolic cotangent of 1, approximately 1.3130.see also COSH, SINH, TANH, +COTH + Returns the hyperbolic cotangent of a given number (angle). + Syntax + COTH(Number) + Returns the hyperbolic cotangent of Number. + Example + + =COTH(1) returns the hyperbolic cotangent of 1, approximately 1.3130.see also COSH, SINH, TANH, ACOSH, ASINH, ATANH, ACOTH,
-
+
DEGREES function -converting;radians, into degrees + converting;radians, into degrees mw added one entry -DEGREES -Converts radians into degrees. -Syntax -DEGREES(Number) - -Number is the angle in radians to be converted to degrees. -Example - -=DEGREES(PI()) returns 180 degrees.see also RADIANS +DEGREES + Converts radians into degrees. + Syntax + DEGREES(Number) + + Number is the angle in radians to be converted to degrees. + Example + + =DEGREES(PI()) returns 180 degrees.see also RADIANS
-
+
EXP function -EXP -Returns e raised to the power of a number. The constant e has a value of approximately 2.71828182845904. -Syntax -EXP(Number) - -Number is the power to which e is to be raised. -Example - -=EXP(1) returns 2.71828182845904, the mathematical constant e to Calc's accuracy.see also POWER, LN, +EXP + Returns e raised to the power of a number. The constant e has a value of approximately 2.71828182845904. + Syntax + EXP(Number) + + Number is the power to which e is to be raised. + Example + + =EXP(1) returns 2.71828182845904, the mathematical constant e to Calc's accuracy.see also POWER, LN,
-
+
FACT function -factorials;numbers + factorials;numbers mw added one entry -FACT -Returns the factorial of a number. -Syntax -FACT(Number) - Returns Number!, the factorial of Number, calculated as 1*2*3*4* ... * Number. -=FACT(0) returns 1 by definition. -The factorial of a negative number returns the "invalid argument" error. -Example - -=FACT(3) returns 6. - -=FACT(0) returns 1.see also FACTDOUBLE, MULTINOMIAL, PRODUCT +FACT + Returns the factorial of a number. + Syntax + FACT(Number) + Returns Number!, the factorial of Number, calculated as 1*2*3*4* ... * Number. + =FACT(0) returns 1 by definition. + The factorial of a negative number returns the "invalid argument" error. + Example + + =FACT(3) returns 6. + + =FACT(0) returns 1.see also FACTDOUBLE, MULTINOMIAL, PRODUCT
-
+
INT function -numbers;rounding down to next integer -rounding;down to next integer + numbers;rounding down to next integer + rounding;down to next integer mw added two entries -INT -Rounds a number down to the nearest integer. -Syntax -INT(Number) -Returns Number rounded down to the nearest integer. -Negative numbers round down to the integer below. -Example - -=INT(5.7) returns 5. - -=INT(-1.3) returns -2.see also TRUNC, ROUND, ROUNDDOWN, ROUNDUP, +INT + Rounds a number down to the nearest integer. + Syntax + INT(Number) + Returns Number rounded down to the nearest integer. + Negative numbers round down to the integer below. + Example + + =INT(5.7) returns 5. + + =INT(-1.3) returns -2.see also TRUNC, ROUND, ROUNDDOWN, ROUNDUP, CEILING, FLOOR, EVEN, ODD, MROUND,
-
+
EVEN function -numbers;rounding up/down to even integers -rounding;up/down to even integers + numbers;rounding up/down to even integers + rounding;up/down to even integers mw added two entries -EVEN -Rounds a positive number up to the next even integer and a negative number down to the next even integer. -Syntax -EVEN(Number) - Returns Number rounded to the next even integer up, away from zero. -Examples - -=EVEN(2.3) returns 4. - -=EVEN(2) returns 2. - -=EVEN(0) returns 0. - -=EVEN(-0.5) returns -2.see also CEILING, FLOOR, ODD, MROUND, +EVEN + Rounds a positive number up to the next even integer and a negative number down to the next even integer. + Syntax + EVEN(Number) + Returns Number rounded to the next even integer up, away from zero. + Examples + + =EVEN(2.3) returns 4. + + =EVEN(2) returns 2. + + =EVEN(0) returns 0. + + =EVEN(-0.5) returns -2.see also CEILING, FLOOR, ODD, MROUND, INT, TRUNC, ROUND, ROUNDDOWN, ROUNDUP
-
+
GCD function -greatest common divisor + greatest common divisor mw added one entry -GCD -Returns the greatest common divisor of two or more integers. -The greatest common divisor is the positive largest integer which will divide, without remainder, each of the given integers. -Syntax -GCD(Integer1; Integer2; ...; Integer30) - -Integer1 To 30 are up to 30 integers whose greatest common divisor is to be calculated. -Example - -=GCD(16;32;24) gives the result 8, because 8 is the largest number that can divide 16, 24 and 32 without a remainder. - -=GCD(B1:B3) where cells B1, B2, B3 contain 9, 12, 9 gives 3. -
-
+GCD + Returns the greatest common divisor of two or more integers. + The greatest common divisor is the positive largest integer which will divide, without remainder, each of the given integers. + Syntax + GCD(Integer1; Integer2; ...; Integer30) + + Integer1 To 30 are up to 30 integers whose greatest common divisor is to be calculated. + Example + + =GCD(16;32;24) gives the result 8, because 8 is the largest number that can divide 16, 24 and 32 without a remainder. + + =GCD(B1:B3) where cells B1, B2, B3 contain 9, 12, 9 gives 3. +
+
GCD_ADD function -GCD_ADD - The result is the greatest common divisor of a list of numbers. - -Syntax -GCD_ADD(Number(s)) - -Number(s) is a list of up to 30 numbers. -Example - -=GCD_ADD(5;15;25) returns 5. -
-
+GCD_ADD + The result is the greatest common divisor of a list of numbers. + + Syntax + GCD_ADD(Number(s)) + + Number(s) is a list of up to 30 numbers. + Example + + =GCD_ADD(5;15;25) returns 5. +
+
ISEVEN function -even integers + even integers mw added one entry -ISEVENlink from Information cat -Returns TRUE if the value is an even integer, or FALSE if the value is odd. -Syntax -ISEVEN(Value) - -Value is the value to be checked. -If Value is not an integer any digits after the decimal point are ignored. The sign of Value is also ignored. -Example - -=ISEVEN(48) returns TRUE - -=ISEVEN(33) returns FALSE - -=ISEVEN(0) returns TRUE - -=ISEVEN(-2.1) returns TRUE - -=ISEVEN(3.999) returns FALSEsee also ISODD +ISEVENlink from Information cat + Returns TRUE if the value is an even integer, or FALSE if the value is odd. + Syntax + ISEVEN(Value) + + Value is the value to be checked. + If Value is not an integer any digits after the decimal point are ignored. The sign of Value is also ignored. + Example + + =ISEVEN(48) returns TRUE + + =ISEVEN(33) returns FALSE + + =ISEVEN(0) returns TRUE + + =ISEVEN(-2.1) returns TRUE + + =ISEVEN(3.999) returns FALSEsee also ISODD
-
+
ISODD function -odd integers + odd integers mw added one entry -ISODDlink from Information cat -Returns TRUE if the value is odd, or FALSE if the number is even. -Syntax -ISODD(value) - -Value is the value to be checked. -If Value is not an integer any digits after the decimal point are ignored. The sign of Value is also ignored. -Example - -=ISODD(33) returns TRUE - -=ISODD(48) returns FALSE - -=ISODD(3.999) returns TRUE - -=ISODD(-3.1) returns TRUEsee also ISEVEN +ISODDlink from Information cat + Returns TRUE if the value is odd, or FALSE if the number is even. + Syntax + ISODD(value) + + Value is the value to be checked. + If Value is not an integer any digits after the decimal point are ignored. The sign of Value is also ignored. + Example + + =ISODD(33) returns TRUE + + =ISODD(48) returns FALSE + + =ISODD(3.999) returns TRUE + + =ISODD(-3.1) returns TRUEsee also ISEVEN
-
+
LCM function -least common multiples -lowest common multiples + least common multiples + lowest common multiples mw added two entries -LCM -Returns the least common multiple of one or more integers. -Syntax -LCM(Integer1; Integer2; ...; Integer30) - -Integer1 to 30 are up to 30 integers whose lowest common multiple is to be calculated. -Example -If you enter the numbers 512;1024 and 2000 in the Integer 1;2 and 3 text boxes, 128000 will be returned as the result. -
-
+LCM + Returns the least common multiple of one or more integers. + Syntax + LCM(Integer1; Integer2; ...; Integer30) + + Integer1 to 30 are up to 30 integers whose lowest common multiple is to be calculated. + Example + If you enter the numbers 512;1024 and 2000 in the Integer 1;2 and 3 text boxes, 128000 will be returned as the result. +
+
LCM_ADD function -LCM_ADD - The result is the lowest common multiple of a list of numbers. - -Syntax -LCM_ADD(Number(s)) - -Number(s) is a list of up to 30 numbers. -Example - -=LCM_ADD(5;15;25) returns 75. -
-
+LCM_ADD + The result is the lowest common multiple of a list of numbers. + + Syntax + LCM_ADD(Number(s)) + + Number(s) is a list of up to 30 numbers. + Example + + =LCM_ADD(5;15;25) returns 75. +
+
COMBIN function -number of combinations + number of combinations mw added one entry -COMBINshould be statistical-->add a link there -Returns the number of combinations for elements without repetition. -Syntax -COMBIN(Count1; Count2) - -Count1 is the number of items in the set. - -Count2 is the number of items to choose from the set. -COMBIN returns the number of ordered ways to choose these items. For example if there are 3 items A, B and C in a set, you can choose 2 items in 3 different ways, namely AB, AC and BC. -COMBIN implements the formula: Count1!/(Count2!*(Count1-Count2)!) -Example - -=COMBIN(3;2) returns 3.see also COMBINA +COMBINshould be statistical-->add a link there + Returns the number of combinations for elements without repetition. + Syntax + COMBIN(Count1; Count2) + + Count1 is the number of items in the set. + + Count2 is the number of items to choose from the set. + COMBIN returns the number of ordered ways to choose these items. For example if there are 3 items A, B and C in a set, you can choose 2 items in 3 different ways, namely AB, AC and BC. + COMBIN implements the formula: Count1!/(Count2!*(Count1-Count2)!) + Example + + =COMBIN(3;2) returns 3.see also COMBINA
-
+
COMBINA function -number of combinations with repetitions + number of combinations with repetitions mw added one entry -COMBINAshould be statistical-->add a link there -Returns the number of combinations of a subset of items including repetitions. -Syntax -COMBINA(Count1; Count2) - -Count1 is the number of items in the set. - -Count2 is the number of items to choose from the set. -COMBINA returns the number of unique ways to choose these items, where the order of choosing is irrelevant, and repetition of items is allowed. For example if there are 3 items A, B and C in a set, you can choose 2 items in 6 different ways, namely AB, BA, AC, CA, BC and CB. -COMBINA implements the formula: (Count1+Count2-1)! / (Count2!(Count1-1)!)i88052 -Example - -=COMBINA(3;2) returns 6.see also COMBIN +COMBINAshould be statistical-->add a link there + Returns the number of combinations of a subset of items including repetitions. + Syntax + COMBINA(Count1; Count2) + + Count1 is the number of items in the set. + + Count2 is the number of items to choose from the set. + COMBINA returns the number of unique ways to choose these items, where the order of choosing is irrelevant, and repetition of items is allowed. For example if there are 3 items A, B and C in a set, you can choose 2 items in 6 different ways, namely AB, BA, AC, CA, BC and CB. + COMBINA implements the formula: (Count1+Count2-1)! / (Count2!(Count1-1)!)i88052 + Example + + =COMBINA(3;2) returns 6.see also COMBIN
-
+
TRUNC function -decimal places;cutting off + decimal places;cutting off mw added one entry -TRUNC -Truncates a number by removing decimal places. -Syntax -TRUNC(Number; Count) -Returns Number with at most Count decimal places. Excess decimal places are simply removed, irrespective of sign. - -TRUNC(Number; 0) behaves as INT(Number) for positive numbers, but effectively rounds towards zero for negative numbers. -The visible decimal places of the result are specified in Tools - Options - %PRODUCTNAME Calc - Calculate. -Example - -=TRUNC(1.239;2) returns 1.23. The 9 is lost. - -=TRUNC(-1.234999;3) returns -1.234. All the 9s are lost.see also INT, ROUND, ROUNDDOWN, ROUNDUP, +TRUNC + Truncates a number by removing decimal places. + Syntax + TRUNC(Number; Count) + Returns Number with at most Count decimal places. Excess decimal places are simply removed, irrespective of sign. + + TRUNC(Number; 0) behaves as INT(Number) for positive numbers, but effectively rounds towards zero for negative numbers. + The visible decimal places of the result are specified in Tools - Options - %PRODUCTNAME Calc - Calculate. + Example + + =TRUNC(1.239;2) returns 1.23. The 9 is lost. + + =TRUNC(-1.234999;3) returns -1.234. All the 9s are lost.see also INT, ROUND, ROUNDDOWN, ROUNDUP, CEILING, FLOOR, EVEN, ODD, MROUND
-
+
LN function -natural logarithm + natural logarithm mw added one entry -LN -Returns the natural logarithm based on the constant e of a number. The constant e has a value of approximately 2.71828182845904. -Syntax -LN(Number) - -Number is the value whose natural logarithm is to be calculated. -Example - -=LN(3) returns the natural logarithm of 3 (approximately 1.0986). - -=LN(EXP(321)) returns 321.see also LOG, LOG10, EXP, +LN + Returns the natural logarithm based on the constant e of a number. The constant e has a value of approximately 2.71828182845904. + Syntax + LN(Number) + + Number is the value whose natural logarithm is to be calculated. + Example + + =LN(3) returns the natural logarithm of 3 (approximately 1.0986). + + =LN(EXP(321)) returns 321.see also LOG, LOG10, EXP,
-
+
LOG function -logarithms + logarithms mw added one entry -LOG -Returns the logarithm of a number to the specified base. -Syntax -LOG(Number; Base) - -Number is the value whose logarithm is to be calculated. - -Base is the base for the logarithm calculation. -Example - -=LOG(10;3) returns the logarithm to base 3 of 10 (approximately 2.0959). - -=LOG(7^4;7) returns 4.see also LOG10, LN, POWER, +LOG + Returns the logarithm of a number to the specified base. + Syntax + LOG(Number; Base) + + Number is the value whose logarithm is to be calculated. + + Base (optional) is the base for the logarithm calculation. If omitted, Base 10 is assumed. + Example + + =LOG(10;3) returns the logarithm to base 3 of 10 (approximately 2.0959). + + =LOG(7^4;7) returns 4.see also LOG10, LN, POWER,
-
+
LOG10 function -base-10 logarithm + base-10 logarithm mw added one entry -LOG10 -Returns the base-10 logarithm of a number. -Syntax -LOG10(Number) -Returns the logarithm to base 10 of Number. -Example - -=LOG10(5) returns the base-10 logarithm of 5 (approximately 0.69897).see also LOG, LN, POWER +LOG10 + Returns the base-10 logarithm of a number. + Syntax + LOG10(Number) + Returns the logarithm to base 10 of Number. + Example + + =LOG10(5) returns the base-10 logarithm of 5 (approximately 0.69897).see also LOG, LN, POWER
-
+
CEILING function -rounding;up to multiples of significance + rounding;up to multiples of significance mw added one entry -CEILING -Rounds a number up to the nearest multiple of Significance. -Syntax -CEILING(Number; Significance; Mode) - -Number is the number that is to be rounded up. - -Significance is the number to whose multiple the value is to be rounded up. - -Mode is an optional value. If the Mode value is given and not equal to zero, and if Number and Significance are negative, then rounding is done based on the absolute value of Number. This parameter is ignored when exporting to MS Excel as Excel does not know any third parameter. -If both parameters Number and Significance are negative and the Mode value is equal to zero or is not given, the results in $[officename] and Excel will differ after the import has been completed. If you export the spreadsheet to Excel, use Mode=1 to see the same results in Excel as in Calc. -Example - -=CEILING(-11;-2) returns -10 - -=CEILING(-11;-2;0) returns -10 - -=CEILING(-11;-2;1) returns -12see also FLOOR, EVEN, ODD, MROUND, +CEILING + Rounds a number up to the nearest multiple of Significance. + Syntax + CEILING(Number; Significance; Mode) + + Number is the number that is to be rounded up. + + Significance is the number to whose multiple the value is to be rounded up. + + Mode is an optional value. If the Mode value is given and not equal to zero, and if Number and Significance are negative, then rounding is done based on the absolute value of Number. This parameter is ignored when exporting to MS Excel as Excel does not know any third parameter. + If both parameters Number and Significance are negative and the Mode value is equal to zero or is not given, the results in $[officename] and Excel will differ after the import has been completed. If you export the spreadsheet to Excel, use Mode=1 to see the same results in Excel as in Calc. + Example + + =CEILING(-11;-2) returns -10 + + =CEILING(-11;-2;0) returns -10 + + =CEILING(-11;-2;1) returns -12see also FLOOR, EVEN, ODD, MROUND, INT, TRUNC, ROUND, ROUNDDOWN, ROUNDUP
-
+
PI function -PI -Returns 3.14159265358979, the value of the mathematical constant PI to 14 decimal places. -Syntax -PI() -Example - -=PI() returns 3.14159265358979. -
-
+PI + Returns 3.14159265358979, the value of the mathematical constant PI to 14 decimal places. + Syntax + PI() + Example + + =PI() returns 3.14159265358979. +
+
MULTINOMIAL function -MULTINOMIAL - Returns the factorial of the sum of the arguments divided by the product of the factorials of the arguments. -Syntax -MULTINOMIAL(Number(s)) - -Number(s) is a list of up to 30 numbers. -Example - -=MULTINOMIAL(F11:H11) returns 1260, if F11 to H11 contain the values 2, 3 and 4. This corresponds to the formula =(2+3+4)! / (2!*3!*4!) -
-
+MULTINOMIAL + Returns the factorial of the sum of the arguments divided by the product of the factorials of the arguments. + Syntax + MULTINOMIAL(Number(s)) + + Number(s) is a list of up to 30 numbers. + Example + + =MULTINOMIAL(F11:H11) returns 1260, if F11 to H11 contain the values 2, 3 and 4. This corresponds to the formula =(2+3+4)! / (2!*3!*4!) +
+
POWER function -POWER -Returns a number raised to a power. -Syntax -POWER(Base; Power) -Returns Base raised to the power of Power. -The same result may be achieved by using the exponentiation operator ^: - -Base^Power - -Example - -=POWER(4;3) returns 64, which is 4 to the power of 3. -=4^3 also returns 4 to the power of 3.see also EXP, LOG, SQRT +POWER + Returns a number raised to a power. + Syntax + POWER(Base; Power) + Returns Base raised to the power of Power. + The same result may be achieved by using the exponentiation operator ^: + + Base^Power + + Example + + =POWER(4;3) returns 64, which is 4 to the power of 3. + =4^3 also returns 4 to the power of 3.see also EXP, LOG, SQRT
-
+
SERIESSUM function -SERIESSUM -Sums the first terms of a power series. -SERIESSUM(x;n;m;coefficients) = coefficient_1*x^n + coefficient_2*x^(n+m) + coefficient_3*x^(n+2m) +...+ coefficient_i*x^(n+(i-1)m) -Syntax -SERIESSUM(X; N; M; Coefficients) - -X is the input value for the power series. - -N is the initial power - -M is the increment to increase N - -Coefficients is a series of coefficients. For each coefficient the series sum is extended by one section. -
-
+SERIESSUM + Sums the first terms of a power series. + SERIESSUM(x;n;m;coefficients) = coefficient_1*x^n + coefficient_2*x^(n+m) + coefficient_3*x^(n+2m) +...+ coefficient_i*x^(n+(i-1)m) + Syntax + SERIESSUM(X; N; M; Coefficients) + + X is the input value for the power series. + + N is the initial power + + M is the increment to increase N + + Coefficients is a series of coefficients. For each coefficient the series sum is extended by one section. +
+
PRODUCT function -numbers;multiplying -multiplying;numbers + numbers;multiplying + multiplying;numbers mw added two entries -PRODUCT -Multiplies all the numbers given as arguments and returns the product. -Syntax -PRODUCT(Number1; Number2; ...; Number30) - -Number1 to 30 are up to 30 arguments whose product is to be calculated. -PRODUCT returns number1 * number2 * number3 * ... -Example - -=PRODUCT(2;3;4) returns 24.see also FACT, SUM +PRODUCT + Multiplies all the numbers given as arguments and returns the product. + Syntax + PRODUCT(Number1; Number2; ...; Number30) + + Number1 to 30 are up to 30 arguments whose product is to be calculated. + PRODUCT returns number1 * number2 * number3 * ... + Example + + =PRODUCT(2;3;4) returns 24.see also FACT, SUM
-
+
SUMSQ function -square number additions -sums;of square numbers + square number additions + sums;of square numbers mw added two entries -SUMSQ -If you want to calculate the sum of the squares of numbers (totaling up of the squares of the arguments), enter these into the text fields. -Syntax -SUMSQ(Number1; Number2; ...; Number30) - -Number1 to 30 are up to 30 arguments the sum of whose squares is to be calculated. -Example -If you enter the numbers 2; 3 and 4 in the Number 1; 2 and 3 text boxes, 29 is returned as the result. -
-
+SUMSQ + If you want to calculate the sum of the squares of numbers (totaling up of the squares of the arguments), enter these into the text fields. + Syntax + SUMSQ(Number1; Number2; ...; Number30) + + Number1 to 30 are up to 30 arguments the sum of whose squares is to be calculated. + Example + If you enter the numbers 2; 3 and 4 in the Number 1; 2 and 3 text boxes, 29 is returned as the result. +
+
MOD function -remainders of divisions + remainders of divisions mw added one entry -MOD -Returns the remainder when one integer is divided by another. -Syntax -MOD(Dividend; Divisor) - For integer arguments this function returns Dividend modulo Divisor, that is the remainder when Dividend is divided by Divisor. -This function is implemented as Dividend - Divisor * INT(Dividend/Divisor) , and this formula gives the result if the arguments are not integer. -Example - -=MOD(22;3) returns 1, the remainder when 22 is divided by 3. - -=MOD(11.25;2.5) returns 1.25.see also QUOTIENT, INT, +MOD + Returns the remainder when one integer is divided by another. + Syntax + MOD(Dividend; Divisor) + For integer arguments this function returns Dividend modulo Divisor, that is the remainder when Dividend is divided by Divisor. + This function is implemented as Dividend - Divisor * INT(Dividend/Divisor) , and this formula gives the result if the arguments are not integer. + Example + + =MOD(22;3) returns 1, the remainder when 22 is divided by 3. + + =MOD(11.25;2.5) returns 1.25.see also QUOTIENT, INT,
-
+
QUOTIENT function -divisions + divisions mw added one entry -QUOTIENT -Returns the integer part of a division operation. -Syntax -QUOTIENT(Numerator; Denominator) -Returns the integer part of Numerator divided by Denominator. -QUOTIENT is equivalent to INT(numerator/denominator), except that it may report errors with different error codes. -Example - -=QUOTIENT(11;3) returns 3. The remainder of 2 is lost.see also MOD, INT +QUOTIENT + Returns the integer part of a division operation. + Syntax + QUOTIENT(Numerator; Denominator) + Returns the integer part of Numerator divided by Denominator. + QUOTIENT is equivalent to INT(numerator/denominator), except that it may report errors with different error codes. + Example + + =QUOTIENT(11;3) returns 3. The remainder of 2 is lost.see also MOD, INT
-
+
RADIANS function -converting;degrees, into radians + converting;degrees, into radians mw added one entry -RADIANS -Converts degrees to radians. -Syntax -RADIANS(Number) - -Number is the angle in degrees to be converted to radians. -Example - -=RADIANS(90) returns 1.5707963267949, which is PI/2 to Calc's accuracy.see also DEGREES +RADIANS + Converts degrees to radians. + Syntax + RADIANS(Number) + + Number is the angle in degrees to be converted to radians. + Example + + =RADIANS(90) returns 1.5707963267949, which is PI/2 to Calc's accuracy.see also DEGREES
-
+
ROUND function -ROUND -Rounds a number to a certain number of decimal places. -Syntax -ROUND(Number; Count) -Returns Number rounded to Count decimal places. If Count is omitted or zero, the function rounds to the nearest integer. If Ccunt is negative, the function rounds to the nearest 10, 100, 1000, etc. -This function rounds to the nearest number. See ROUNDDOWN and ROUNDUP for alternatives. -Example - -=ROUND(2.348;2) returns 2.35 - -=ROUND(-32.4834;3) returns -32.483. Change the cell format to see all decimals. - -=ROUND(2.348;0) returns 2. - -=ROUND(2.5) returns 3. - -=ROUND(987.65;-2) returns 1000.see also INT, TRUNC, ROUNDDOWN, ROUNDUP, +ROUND + Rounds a number to a certain number of decimal places. + Syntax + ROUND(Number; Count) + Returns Number rounded to Count decimal places. If Count is omitted or zero, the function rounds to the nearest integer. If Ccunt is negative, the function rounds to the nearest 10, 100, 1000, etc. + This function rounds to the nearest number. See ROUNDDOWN and ROUNDUP for alternatives. + Example + + =ROUND(2.348;2) returns 2.35 + + =ROUND(-32.4834;3) returns -32.483. Change the cell format to see all decimals. + + =ROUND(2.348;0) returns 2. + + =ROUND(2.5) returns 3. + + =ROUND(987.65;-2) returns 1000.see also INT, TRUNC, ROUNDDOWN, ROUNDUP, CEILING, FLOOR, EVEN, ODD, MROUND
-
+
ROUNDDOWN function -ROUNDDOWN -Rounds a number down, toward zero, to a certain precision. -Syntax -ROUNDDOWN(Number; Count) -Returns Number rounded down (towards zero) to Count decimal places. If Count is omitted or zero, the function rounds down to an integer. If Count is negative, the function rounds down to the next 10, 100, 1000, etc. -This function rounds towards zero. See ROUNDUP and ROUND for alternatives. -Example - -=ROUNDDOWN(1.234;2) returns 1.23. - -=ROUNDDOWN(45.67;0) returns 45. - -=ROUNDDOWN(-45.67) returns -45. - -=ROUNDDOWN(987.65;-2) returns 900.see also INT, TRUNC, ROUND, ROUNDUP, +ROUNDDOWN + Rounds a number down, toward zero, to a certain precision. + Syntax + ROUNDDOWN(Number; Count) + Returns Number rounded down (towards zero) to Count decimal places. If Count is omitted or zero, the function rounds down to an integer. If Count is negative, the function rounds down to the next 10, 100, 1000, etc. + This function rounds towards zero. See ROUNDUP and ROUND for alternatives. + Example + + =ROUNDDOWN(1.234;2) returns 1.23. + + =ROUNDDOWN(45.67;0) returns 45. + + =ROUNDDOWN(-45.67) returns -45. + + =ROUNDDOWN(987.65;-2) returns 900.see also INT, TRUNC, ROUND, ROUNDUP, CEILING, FLOOR, EVEN, ODD, MROUND
-
+
ROUNDUP function -ROUNDUP -Rounds a number up, away from zero, to a certain precision. -Syntax -ROUNDUP(Number; Count) -Returns Number rounded up (away from zero) to Count decimal places. If Count is omitted or zero, the function rounds up to an integer. If Count is negative, the function rounds up to the next 10, 100, 1000, etc. -This function rounds away from zero. See ROUNDDOWN and ROUND for alternatives. -Example - -=ROUNDUP(1.1111;2) returns 1.12. - -=ROUNDUP(1.2345;1) returns 1.3. - -=ROUNDUP(45.67;0) returns 46. - -=ROUNDUP(-45.67) returns -46. - -=ROUNDUP(987.65;-2) returns 1000.see also INT, TRUNC, ROUND, ROUNDDOWN, +ROUNDUP + Rounds a number up, away from zero, to a certain precision. + Syntax + ROUNDUP(Number; Count) + Returns Number rounded up (away from zero) to Count decimal places. If Count is omitted or zero, the function rounds up to an integer. If Count is negative, the function rounds up to the next 10, 100, 1000, etc. + This function rounds away from zero. See ROUNDDOWN and ROUND for alternatives. + Example + + =ROUNDUP(1.1111;2) returns 1.12. + + =ROUNDUP(1.2345;1) returns 1.3. + + =ROUNDUP(45.67;0) returns 46. + + =ROUNDUP(-45.67) returns -46. + + =ROUNDUP(987.65;-2) returns 1000.see also INT, TRUNC, ROUND, ROUNDDOWN, CEILING, FLOOR, EVEN, ODD, MROUND
-
+
SIN function -SIN -Returns the sine of the given angle (in radians). -Syntax -SIN(Number) -Returns the (trigonometric) sine of Number, the angle in radians. -To return the sine of an angle in degrees, use the RADIANS function. -Example - -=SIN(PI()/2) returns 1, the sine of PI/2 radians. - -=SIN(RADIANS(30)) returns 0.5, the sine of 30 degrees.see also COS, TAN, COT, +SIN + Returns the sine of the given angle (in radians). + Syntax + SIN(Number) + Returns the (trigonometric) sine of Number, the angle in radians. + To return the sine of an angle in degrees, use the RADIANS function. + Example + + =SIN(PI()/2) returns 1, the sine of PI/2 radians. + + =SIN(RADIANS(30)) returns 0.5, the sine of 30 degrees.see also COS, TAN, COT, ACOS, ASIN, ATAN, ATAN2, ACOT
-
+
SINH function -SINH -Returns the hyperbolic sine of a number. -Syntax -SINH(Number) -Returns the hyperbolic sine of Number. -Example - -=SINH(0) returns 0, the hyperbolic sine of 0.see also COSH, TANH, COTH, +SINH + Returns the hyperbolic sine of a number. + Syntax + SINH(Number) + Returns the hyperbolic sine of Number. + Example + + =SINH(0) returns 0, the hyperbolic sine of 0.see also COSH, TANH, COTH, ACOSH, ASINH, ATANH, ACOTH
-
+
SUM function -adding;numbers in cell ranges + adding;numbers in cell ranges mw added one entry -SUM -Adds all the numbers in a range of cells. -Syntax -SUM(Number1; Number2; ...; Number30) - -Number 1 to Number 30 are up to 30 arguments whose sum is to be calculated. -Example -If you enter the numbers 2; 3 and 4 in the Number 1; 2 and 3 text boxes, 9 will be returned as the result. - -=SUM(A1;A3;B5) calculates the sum of the three cells. =SUM (A1:E10) calculates the sum of all cells in the A1 to E10 cell range. -Conditions linked by AND can be used with the function SUM() in the following manner: -Example assumption: You have entered invoices into a table. Column A contains the date value of the invoice, column B the amounts. You want to find a formula that you can use to return the total of all amounts only for a specific month, e.g. only the amount for the period >=2008-01-01 to <2008-02-01. The range with the date values covers A1:A40, the range containing the amounts to be totaled is B1:B40. C1 contains the start date, 2008-01-01, of the invoices to be included and C2 the date, 2008-02-01, that is no longer included. -Enter the following formula as an array formula: - -=SUM((A1:A40>=C1)*(A1:A40<C2)*B1:B40) - -In order to enter this as an array formula, you must press the Shift+Command+ Ctrl+ Enter keys instead of simply pressing the Enter key to close the formula. The formula will then be shown in the Formula bar enclosed in braces. -{=SUM((A1:A40>=C1)*(A1:A40<C2)*B1:B40)} -The formula is based on the fact that the result of a comparison is 1 if the criterion is met and 0 if it is not met. The individual comparison results will be treated as an array and used in matrix multiplication, and at the end the individual values will be totaled to give the result matrix. -
-
+SUM + Adds all the numbers in a range of cells. + Syntax + SUM(Number1; Number2; ...; Number30) + + Number 1 to Number 30 are up to 30 arguments whose sum is to be calculated. + Example + If you enter the numbers 2; 3 and 4 in the Number 1; 2 and 3 text boxes, 9 will be returned as the result. + + =SUM(A1;A3;B5) calculates the sum of the three cells. =SUM (A1:E10) calculates the sum of all cells in the A1 to E10 cell range. + Conditions linked by AND can be used with the function SUM() in the following manner: + Example assumption: You have entered invoices into a table. Column A contains the date value of the invoice, column B the amounts. You want to find a formula that you can use to return the total of all amounts only for a specific month, e.g. only the amount for the period >=2008-01-01 to <2008-02-01. The range with the date values covers A1:A40, the range containing the amounts to be totaled is B1:B40. C1 contains the start date, 2008-01-01, of the invoices to be included and C2 the date, 2008-02-01, that is no longer included. + Enter the following formula as an array formula: + + =SUM((A1:A40>=C1)*(A1:A40<C2)*B1:B40) + + In order to enter this as an array formula, you must press the Shift+Command ++ Ctrl+ Enter keys instead of simply pressing the Enter key to close the formula. The formula will then be shown in the Formula bar enclosed in braces. + {=SUM((A1:A40>=C1)*(A1:A40<C2)*B1:B40)} + The formula is based on the fact that the result of a comparison is 1 if the criterion is met and 0 if it is not met. The individual comparison results will be treated as an array and used in matrix multiplication, and at the end the individual values will be totaled to give the result matrix. +
+
SUMIF function -adding;specified numbers + adding;specified numbers mw added one entry -SUMIF -Adds the cells specified by a given criteria. This function is used to browse a range when you search for a certain value. - -Syntax -SUMIF(Range; Criteria; SumRange) - -Range is the range to which the criteria are to be applied. - -Criteria is the cell in which the search criterion is shown, or the search criterion itself. If the criteria is written into the formula, it has to be surrounded by double quotes. - -SumRange is the range from which values are summed. If this parameter has not been indicated, the values found in the Range are summed. -SUMIF supports the reference concatenation operator (~) only in the Criteria parameter, and only if the optional SumRange parameter is not given. -Example -To sum up only negative numbers: =SUMIF(A1:A10;"<0") - - -=SUMIF(A1:A10;">0";B1:10) - sums values from the range B1:B10 only if the corresponding values in the range A1:A10 are >0. -See COUNTIF() for some more syntax examples that can be used with SUMIF(). -
-
+SUMIF + Adds the cells specified by a given criteria. This function is used to browse a range when you search for a certain value. + + Syntax + SUMIF(Range; Criteria; SumRange) + + Range is the range to which the criteria are to be applied. + + Criteria is the cell in which the search criterion is shown, or the search criterion itself. If the criteria is written into the formula, it has to be surrounded by double quotes. + + SumRange is the range from which values are summed. If this parameter has not been indicated, the values found in the Range are summed. + SUMIF supports the reference concatenation operator (~) only in the Criteria parameter, and only if the optional SumRange parameter is not given. + Example + To sum up only negative numbers: =SUMIF(A1:A10;"<0") + + + =SUMIF(A1:A10;">0";B1:10) - sums values from the range B1:B10 only if the corresponding values in the range A1:A10 are >0. + See COUNTIF() for some more syntax examples that can be used with SUMIF(). +
+
TAN function -TAN -Returns the tangent of the given angle (in radians). -Syntax -TAN(Number) -Returns the (trigonometric) tangent of Number, the angle in radians. -To return the tangent of an angle in degrees, use the RADIANS function. -Example - -=TAN(PI()/4) returns 1, the tangent of PI/4 radians. - -=TAN(RADIANS(45)) returns 1, the tangent of 45 degrees.see also COS, SIN, COT, +TAN + Returns the tangent of the given angle (in radians). + Syntax + TAN(Number) + Returns the (trigonometric) tangent of Number, the angle in radians. + To return the tangent of an angle in degrees, use the RADIANS function. + Example + + =TAN(PI()/4) returns 1, the tangent of PI/4 radians. + + =TAN(RADIANS(45)) returns 1, the tangent of 45 degrees.see also COS, SIN, COT, ACOS, ASIN, ATAN, ATAN2, ACOT
-
+
TANH function -TANH -Returns the hyperbolic tangent of a number. -Syntax -TANH(Number) -Returns the hyperbolic tangent of Number. -Example - -=TANH(0) returns 0, the hyperbolic tangent of 0.see also COSH, SINH, COTH, +TANH + Returns the hyperbolic tangent of a number. + Syntax + TANH(Number) + Returns the hyperbolic tangent of Number. + Example + + =TANH(0) returns 0, the hyperbolic tangent of 0.see also COSH, SINH, COTH, ACOSH, ASINH, ATANH, ACOTH
-
+
AutoFilter function; subtotals -sums;of filtered data -filtered data; sums -SUBTOTAL function + sums;of filtered data + filtered data; sums + SUBTOTAL function mw made "sums..." a two level entry -SUBTOTAL -Calculates subtotals. If a range already contains subtotals, these are not used for further calculations. Use this function with the AutoFilters to take only the filtered records into account. -Syntax -SUBTOTAL(Function; Range) - -Function is a number that stands for one of the following functions: - - - -Function index - - -Function - - - - -1 - - -AVERAGE - - - - -2 - - -COUNT - - - - -3 - - -COUNTA - - - - -4 - - -MAX - - - - -5 - - -MIN - - - - -6 - - -PRODUCT - - - - -7 - - -STDEV - - - - -8 - - -STDEVP - - - - -9 - - -SUM - - - - -10 - - -VAR - - - - -11 - - -VARP - - -
+SUBTOTAL + Calculates subtotals. If a range already contains subtotals, these are not used for further calculations. Use this function with the AutoFilters to take only the filtered records into account. + Syntax + SUBTOTAL(Function; Range) + + Function is a number that stands for one of the following functions: + + + + Function index + + + Function + + + + + 1 + + + AVERAGE + + + + + 2 + + + COUNT + + + + + 3 + + + COUNTA + + + + + 4 + + + MAX + + + + + 5 + + + MIN + + + + + 6 + + + PRODUCT + + + + + 7 + + + STDEV + + + + + 8 + + + STDEVP + + + + + 9 + + + SUM + + + + + 10 + + + VAR + + + + + 11 + + + VARP + + +
- -Range is the range whose cells are included. -Example -You have a table in the cell range A1:B5 containing cities in column A and accompanying figures in column B. You have used an AutoFilter so that you only see rows containing the city Hamburg. You want to see the sum of the figures that are displayed; that is, just the subtotal for the filtered rows. In this case the correct formula would be: - -=SUBTOTAL(9;B2:B5) - -
-
-Euro; converting in -CONVERT function + + Range is the range whose cells are included. + Example + You have a table in the cell range A1:B5 containing cities in column A and accompanying figures in column B. You have used an AutoFilter so that you only see rows containing the city Hamburg. You want to see the sum of the figures that are displayed; that is, just the subtotal for the filtered rows. In this case the correct formula would be: + + =SUBTOTAL(9;B2:B5) + +
+
+Euro; converting + EUROCONVERT function -CONVERTinsert link in financial -Converts old European national currency to and from Euros. - -Syntax - -CONVERT(Value; "Currency1"; "Currency2") - -Value is the amount of the currency to be converted. - -Currency1 and Currency2 are the currency units to convert from and to respectively. These must be text, the official abbreviation for the currency (for example, "EUR"). The rates (shown per Euro) were set by the European Commission. -Either Currency1 or Currency2 must be specified as Euros. - -Examples - - -=CONVERT(100;"ATS";"EUR") converts 100 Austrian Schillings into Euros. - -=CONVERT(100;"EUR";"DEM") converts 100 Euros into German Marks. -
-
+ +EUROCONVERTinsert link in financial + Converts between old European national currency and to and from Euros. + + Syntax + + EUROCONVERT(Value; "From_currency"; "To_currency", full_precision, triangulation_precision) + + Value is the amount of the currency to be converted. + + From_currency and To_currency are the currency units to convert from and to respectively. These must be text, the official abbreviation for the currency (for example, "EUR"). The rates (shown per Euro) were set by the European Commission. + + Full_precision is optional. If omitted or False, the result is rounded according to the decimals of the To currency. If Full_precision is True, the result is not rounded. + + Triangulation_precision is optional. If Triangulation_precision is given and >=3, the intermediate result of a triangular conversion (currency1,EUR,currency2) is rounded to that precision. If Triangulation_precision is omitted, the intermediate result is not rounded. Also if To currency is "EUR", Triangulation_precision is used as if triangulation was needed and conversion from EUR to EUR was applied. + + Examples + + + =EUROCONVERT(100;"ATS";"EUR") converts 100 Austrian Schillings into Euros. + + =EUROCONVERT(100;"EUR";"DEM") converts 100 Euros into German Marks. +
+
ODD function -rounding;up/down to nearest odd integer + rounding;up/down to nearest odd integer mw added one entry -ODD -Rounds a positive number up to the nearest odd integer and a negative number down to the nearest odd integer. -Syntax -ODD(Number) - Returns Number rounded to the next odd integer up, away from zero. -Example - -=ODD(1.2) returns 3. - -=ODD(1) returns 1. - -=ODD(0) returns 1. - -=ODD(-3.1) returns -5.see also CEILING, FLOOR, EVEN, MROUND, +ODD + Rounds a positive number up to the nearest odd integer and a negative number down to the nearest odd integer. + Syntax + ODD(Number) + Returns Number rounded to the next odd integer up, away from zero. + Example + + =ODD(1.2) returns 3. + + =ODD(1) returns 1. + + =ODD(0) returns 1. + + =ODD(-3.1) returns -5.see also CEILING, FLOOR, EVEN, MROUND, INT, TRUNC, ROUND, ROUNDDOWN, ROUNDUP
-
+
FLOOR function -rounding;down to nearest multiple of significance + rounding;down to nearest multiple of significance mw added one entry -FLOOR -Rounds a number down to the nearest multiple of Significance. -Syntax -FLOOR(Number; Significance; Mode) - -Number is the number that is to be rounded down. - -Significance is the value to whose multiple the number is to be rounded down. - -Mode is an optional value. If the Mode value is given and not equal to zero, and if Number and Significance are negative, then rounding is done based on the absolute value of the number. This parameter is ignored when exporting to MS Excel as Excel does not know any third parameter. -If both parameters Number and Significance are negative, and if the Mode value is equal to zero or is not specified, then the results in $[officename] Calc and Excel will differ after exporting. If you export the spreadsheet to Excel, use Mode=1 to see the same results in Excel as in Calc. -Example - -=FLOOR( -11;-2) returns -12 - -=FLOOR( -11;-2;0) returns -12 - -=FLOOR( -11;-2;1) returns -10see also CEILING, EVEN, ODD, MROUND, +FLOOR + Rounds a number down to the nearest multiple of Significance. + Syntax + FLOOR(Number; Significance; Mode) + + Number is the number that is to be rounded down. + + Significance is the value to whose multiple the number is to be rounded down. + + Mode is an optional value. If the Mode value is given and not equal to zero, and if Number and Significance are negative, then rounding is done based on the absolute value of the number. This parameter is ignored when exporting to MS Excel as Excel does not know any third parameter. + If both parameters Number and Significance are negative, and if the Mode value is equal to zero or is not specified, then the results in $[officename] Calc and Excel will differ after exporting. If you export the spreadsheet to Excel, use Mode=1 to see the same results in Excel as in Calc. + Example + + =FLOOR( -11;-2) returns -12 + + =FLOOR( -11;-2;0) returns -12 + + =FLOOR( -11;-2;1) returns -10see also CEILING, EVEN, ODD, MROUND, INT, TRUNC, ROUND, ROUNDDOWN, ROUNDUP,
-
+
SIGN function -algebraic signs + algebraic signs mw added one entry -SIGN -Returns the sign of a number. Returns 1 if the number is positive, -1 if negative and 0 if zero. -Syntax -SIGN(Number) - -Number is the number whose sign is to be determined. -Example - -=SIGN(3.4) returns 1. - -=SIGN(-4.5) returns -1.see also ABS +SIGN + Returns the sign of a number. Returns 1 if the number is positive, -1 if negative and 0 if zero. + Syntax + SIGN(Number) + + Number is the number whose sign is to be determined. + Example + + =SIGN(3.4) returns 1. + + =SIGN(-4.5) returns -1.see also ABS
-
+
MROUND function -nearest multiple + nearest multiple mw added one entry -MROUND -Returns a number rounded to the nearest multiple of another number. -Syntax -MROUND(Number; Multiple) -Returns Number rounded to the nearest multiple of Multiple. -An alternative implementation would be Multiple * ROUND(Number/Multiple). -Example - -=MROUND(15.5;3) returns 15, as 15.5 is closer to 15 (= 3*5) than to 18 (= 3*6). - -=MROUND(1.4;0.5) returns 1.5 (= 0.5*3).see also CEILING, FLOOR, EVEN, ODD, +MROUND + Returns a number rounded to the nearest multiple of another number. + Syntax + MROUND(Number; Multiple) + Returns Number rounded to the nearest multiple of Multiple. + An alternative implementation would be Multiple * ROUND(Number/Multiple). + Example + + =MROUND(15.5;3) returns 15, as 15.5 is closer to 15 (= 3*5) than to 18 (= 3*6). + + =MROUND(1.4;0.5) returns 1.5 (= 0.5*3).see also CEILING, FLOOR, EVEN, ODD, INT, TRUNC, ROUND, ROUNDDOWN, ROUNDUP
-
+
SQRT function -square roots;positive numbers + square roots;positive numbers mw added one entry -SQRT -Returns the positive square root of a number. -Syntax -SQRT(Number) -Returns the positive square root of Number. - Number must be positive. -Example - -=SQRT(16) returns 4. - -=SQRT(-16) returns an invalid argument error.see also SQRTPI, POWER +SQRT + Returns the positive square root of a number. + Syntax + SQRT(Number) + Returns the positive square root of Number. + Number must be positive. + Example + + =SQRT(16) returns 4. + + =SQRT(-16) returns an invalid argument error.see also SQRTPI, POWER
-
+
SQRTPI function -square roots;products of Pi + square roots;products of Pi mw added one entry -SQRTPI -Returns the square root of (PI times a number). -Syntax -SQRTPI(Number) -Returns the positive square root of (PI multiplied by Number). -This is equivalent to SQRT(PI()*Number). -Example - -=SQRTPI(2) returns the squareroot of (2PI), approximately 2.506628.see also SQRT +SQRTPI + Returns the square root of (PI times a number). + Syntax + SQRTPI(Number) + Returns the positive square root of (PI multiplied by Number). + This is equivalent to SQRT(PI()*Number). + Example + + =SQRTPI(2) returns the squareroot of (2PI), approximately 2.506628.see also SQRT
-
+
random numbers; between limits -RANDBETWEEN function + RANDBETWEEN function mw changed "random numbers;" -RANDBETWEEN -Returns an integer random number in a specified range. -Syntax -RANDBETWEEN(Bottom; Top) -Returns an integer random number between integers Bottom and Top (both inclusive). -This function produces a new random number each time Calc recalculates. To force Calc to recalculate manually press Shift+CommandCtrl+F9. -To generate random numbers which never recalculate, copy cells containing this function, and use Edit - Paste Special (with Paste All and Formulas not marked and Numbers marked). -Example - -=RANDBETWEEN(20;30) returns an integer of between 20 and 30.see also RAND +RANDBETWEEN + Returns an integer random number in a specified range. + Syntax + RANDBETWEEN(Bottom; Top) + Returns an integer random number between integers Bottom and Top (both inclusive). + This function produces a new random number each time Calc recalculates. To force Calc to recalculate manually press Shift+Command +Ctrl+F9. + To generate random numbers which never recalculate, copy cells containing this function, and use Edit - Paste Special (with Paste All and Formulas not marked and Numbers marked). + Example + + =RANDBETWEEN(20;30) returns an integer of between 20 and 30.see also RAND
-
+
RAND function -random numbers;between 0 and 1 + random numbers;between 0 and 1 mw added one entry -RAND -Returns a random number between 0 and 1.The value of 0 can be returned, the value of 1 not.this is really true after issue 53642 will be fixed -Syntax -RAND() -This function produces a new random number each time Calc recalculates. To force Calc to recalculate manually press Shift+CommandCtrl+F9. -To generate random numbers which never recalculate, copy cells each containing =RAND(), and use Edit - Paste Special (with Paste All and Formulas not marked and Numbers marked). -Example - -=RAND() returns a random number between 0 and 1.see also RANDBETWEEN +RAND + Returns a random number between 0 and 1.The value of 0 can be returned, the value of 1 not.this is really true after issue 53642 will be fixed + Syntax + RAND() + This function produces a new random number each time Calc recalculates. To force Calc to recalculate manually press Shift+Command +Ctrl+F9. + To generate random numbers which never recalculate, copy cells each containing =RAND(), and use Edit - Paste Special (with Paste All and Formulas not marked and Numbers marked). + Example + + =RAND() returns a random number between 0 and 1.see also RANDBETWEEN
-
+
COUNTIF function -counting;specified cells + counting;specified cells mw added one entry -COUNTIF -Returns the number of cells that meet with certain criteria within a cell range. - -Syntax -COUNTIF(Range; Criteria) - -Range is the range to which the criteria are to be applied. - -Criteria indicates the criteria in the form of a number, an expression or a character string. These criteria determine which cells are counted. You may also enter a search text in the form of a regular expression, e.g. b.* for all words that begin with b. You may also indicate a cell range that contains the search criterion. If you search for literal text, enclose the text in double quotes. -Example -A1:A10 is a cell range containing the numbers 2000 to 2009. Cell B1 contains the number 2006. In cell B2, you enter a formula: - -=COUNTIF(A1:A10;2006) - this returns 1 - -=COUNTIF(A1:A10;B1) - this returns 1 - -=COUNTIF(A1:A10;">=2006") - this returns 3 - -=COUNTIF(A1:A10;"<"&B1) - when B1 contains 2006, this returns 6 - -=COUNTIF(A1:A10;C2) where cell C2 contains the text >2006 counts the number of cells in the range A1:A10 which are >2006 -To count only negative numbers: =COUNTIF(A1:A10;"<0") - -
+COUNTIF + Returns the number of cells that meet with certain criteria within a cell range. + + Syntax + COUNTIF(Range; Criteria) + + Range is the range to which the criteria are to be applied. + + Criteria indicates the criteria in the form of a number, an expression or a character string. These criteria determine which cells are counted. You may also enter a search text in the form of a regular expression, e.g. b.* for all words that begin with b. You may also indicate a cell range that contains the search criterion. If you search for literal text, enclose the text in double quotes. + Example + A1:A10 is a cell range containing the numbers 2000 to 2009. Cell B1 contains the number 2006. In cell B2, you enter a formula: + + =COUNTIF(A1:A10;2006) - this returns 1 + + =COUNTIF(A1:A10;B1) - this returns 1 + + =COUNTIF(A1:A10;">=2006") - this returns 3 + + =COUNTIF(A1:A10;"<"&B1) - when B1 contains 2006, this returns 6 + + =COUNTIF(A1:A10;C2) where cell C2 contains the text >2006 counts the number of cells in the range A1:A10 which are >2006 + To count only negative numbers: =COUNTIF(A1:A10;"<0") + +
- -
- - + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/01/04060109.xhp b/helpcontent2/source/text/scalc/01/04060109.xhp index e40c995eb9..0b9edb1030 100644 --- a/helpcontent2/source/text/scalc/01/04060109.xhp +++ b/helpcontent2/source/text/scalc/01/04060109.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 04060109.xhp,v $ - * $Revision: 1.20.4.2 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,540 +35,594 @@ - -Spreadsheet Functions -/text/scalc/01/04060109.xhp - - - + + Spreadsheet Functions + /text/scalc/01/04060109.xhp + + + spreadsheets; functions -Function Wizard; spreadsheets -functions; spreadsheets + Function Wizard; spreadsheets + functions; spreadsheets -Spreadsheet Functions -This section contains descriptions of the Spreadsheet functions together with an example. +Spreadsheet Functions + This section contains descriptions of the Spreadsheet functions together with an example. -
- -
+
+ +
ADDRESS function -ADDRESS -Returns a cell address (reference) as text, according to the specified row and column numbers. You can determine whether the address is interpreted as an absolute address (for example, $A$1) or as a relative address (as A1) or in a mixed form (A$1 or $A1). You can also specify the name of the sheet. -
-For interoperability the ADDRESS and INDIRECT functions support an optional parameter to specify whether the R1C1 address notation instead of the usual A1 notation should be used. -In ADDRESS, the parameter is inserted as the fourth parameter, shifting the optional sheet name parameter to the fifth position. -In INDIRECT, the parameter is appended as the second parameter. -In both functions, if the argument is inserted with the value 0, then the R1C1 notation is used. If the argument is not given or has a value other than 0, then the A1 notation is used. -In case of R1C1 notation, ADDRESS returns address strings using the exclamation mark '!' as the sheet name separator, and INDIRECT expects the exclamation mark as sheet name separator. Both functions still use the dot '.' sheet name separator with A1 notation. -When opening documents from ODF 1.0/1.1 format, the ADDRESS functions that show a sheet name as the fourth paramater will shift that sheet name to become the fifth parameter. A new fourth parameter with the value 1 will be inserted. -When storing a document in ODF 1.0/1.1 format, if ADDRESS functions have a fourth parameter, that parameter will be removed. -Do not save a spreadsheet in the old ODF 1.0/1.1 format if the ADDRESS function's new fourth parameter was used with a value of 0. -The INDIRECT function is saved without conversion to ODF 1.0/1.1 format. If the second parameter was present, an older version of Calc will return an error for that function. -
-Syntax -ADDRESS(Row; Column; Abs; A1; "Sheet") - -Row represents the row number for the cell reference - -Column represents the column number for the cell reference (the number, not the letter) - -Abs determines the type of reference: -1: absolute ($A$1) -2: row reference type is absolute; column reference is relative (A$1) -3: row (relative); column (absolute) ($A1) -4: relative (A1) - -A1 (optional) - if set to 0, the R1C1 notation is used. If this parameter is absent or set to another value than 0, the A1 notation is used. - -Sheet represents the name of the sheet. It must be placed in double quotes. -Example: - -=ADDRESS(1;1;2;"Sheet2") returns the following: Sheet2.A$1 -If the cell A1 in sheet 2 contains the value -6, you can refer indirectly to the referenced cell using a function in B2 by entering =ABS(INDIRECT(B2)). The result is the absolute value of the cell reference specified in B2, which in this case is 6. -
-
+ADDRESS + Returns a cell address (reference) as text, according to the specified row and column numbers. You can determine whether the address is interpreted as an absolute address (for example, $A$1) or as a relative address (as A1) or in a mixed form (A$1 or $A1). You can also specify the name of the sheet. +
+ For interoperability the ADDRESS and INDIRECT functions support an optional parameter to specify whether the R1C1 address notation instead of the usual A1 notation should be used. + In ADDRESS, the parameter is inserted as the fourth parameter, shifting the optional sheet name parameter to the fifth position. + In INDIRECT, the parameter is appended as the second parameter. + In both functions, if the argument is inserted with the value 0, then the R1C1 notation is used. If the argument is not given or has a value other than 0, then the A1 notation is used. + In case of R1C1 notation, ADDRESS returns address strings using the exclamation mark '!' as the sheet name separator, and INDIRECT expects the exclamation mark as sheet name separator. Both functions still use the dot '.' sheet name separator with A1 notation. + When opening documents from ODF 1.0/1.1 format, the ADDRESS functions that show a sheet name as the fourth paramater will shift that sheet name to become the fifth parameter. A new fourth parameter with the value 1 will be inserted. + When storing a document in ODF 1.0/1.1 format, if ADDRESS functions have a fourth parameter, that parameter will be removed. + Do not save a spreadsheet in the old ODF 1.0/1.1 format if the ADDRESS function's new fourth parameter was used with a value of 0. + The INDIRECT function is saved without conversion to ODF 1.0/1.1 format. If the second parameter was present, an older version of Calc will return an error for that function. +
+ Syntax + ADDRESS(Row; Column; Abs; A1; "Sheet") + + Row represents the row number for the cell reference + + Column represents the column number for the cell reference (the number, not the letter) + + Abs determines the type of reference: + 1: absolute ($A$1) + 2: row reference type is absolute; column reference is relative (A$1) + 3: row (relative); column (absolute) ($A1) + 4: relative (A1) + + A1 (optional) - if set to 0, the R1C1 notation is used. If this parameter is absent or set to another value than 0, the A1 notation is used. + + Sheet represents the name of the sheet. It must be placed in double quotes. + Example: + + =ADDRESS(1;1;2;"Sheet2") returns the following: Sheet2.A$1 + If the cell A1 in sheet 2 contains the value -6, you can refer indirectly to the referenced cell using a function in B2 by entering =ABS(INDIRECT(B2)). The result is the absolute value of the cell reference specified in B2, which in this case is 6. +
+
AREAS function -AREAS -Returns the number of individual ranges that belong to a multiple range. A range can consist of contiguous cells or a single cell. -Syntax -AREAS(Reference) -Reference represents the reference to a cell or cell range. -Example - -=AREAS(A1:B3;F2;G1) returns 3, as it is a reference to three cells and/or areas. - -=AREAS(All) returns 1 if you have defined an area named All under Data - Define Range. -
-
+AREAS + Returns the number of individual ranges that belong to a multiple range. A range can consist of contiguous cells or a single cell. + Syntax + AREAS(Reference) + Reference represents the reference to a cell or cell range. + Example + + =AREAS(A1:B3;F2;G1) returns 3, as it is a reference to three cells and/or areas. + + =AREAS(All) returns 1 if you have defined an area named All under Data - Define Range. +
+
DDE function -DDE -Returns the result of a DDE-based link. If the contents of the linked range or section changes, the returned value will also change. You must reload the spreadsheet or choose Edit - Links to see the updated links. Cross-platform links, for example from a %PRODUCTNAME installation running on a Windows machine to a document created on a Linux machine, are not allowed. -Syntax -DDE("Server"; "File"; "Range"; Mode) - -Server is the name of a server application. %PRODUCTNAMEapplications have the server name "Soffice". - -File is the complete file name, including path specification. - -Range is the area containing the data to be evaluated. - -Mode is an optional parameter that controls the method by which the DDE server converts its data into numbers. - - - - -Mode - - - - -Effect - - - - - -0 or missing - - -Number format from the "Default" cell style - - - - -1 - - -Data are always interpreted in the standard format for US English - - - - -2 - - -Data are retrieved as text; no conversion to numbers - - -
+DDE + Returns the result of a DDE-based link. If the contents of the linked range or section changes, the returned value will also change. You must reload the spreadsheet or choose Edit - Links to see the updated links. Cross-platform links, for example from a %PRODUCTNAME installation running on a Windows machine to a document created on a Linux machine, are not allowed. + Syntax + DDE("Server"; "File"; "Range"; Mode) + + Server is the name of a server application. %PRODUCTNAMEapplications have the server name "Soffice". + + File is the complete file name, including path specification. + + Range is the area containing the data to be evaluated. + + Mode is an optional parameter that controls the method by which the DDE server converts its data into numbers. + + + + + Mode + + + + + Effect + + + + + + 0 or missing + + + Number format from the "Default" cell style + + + + + 1 + + + Data are always interpreted in the standard format for US English + + + + + 2 + + + Data are retrieved as text; no conversion to numbers + + +
-Example - -=DDE("soffice";"c:\office\document\data1.sxc";"sheet1.A1") reads the contents of cell A1 in sheet1 of the %PRODUCTNAME Calc spreadsheet data1.sxc. - -=DDE("soffice";"c:\office\document\motto.sxw";"Today's motto") returns a motto in the cell containing this formula. First, you must enter a line in the motto.sxw document containing the motto text and define it as the first line of a section named Today's Motto (in %PRODUCTNAME Writer under Insert - Section). If the motto is modified (and saved) in the %PRODUCTNAME Writer document, the motto is updated in all %PRODUCTNAME Calc cells in which this DDE link is defined. -
-
+ Example + + =DDE("soffice";"c:\office\document\data1.sxc";"sheet1.A1") reads the contents of cell A1 in sheet1 of the %PRODUCTNAME Calc spreadsheet data1.sxc. + + =DDE("soffice";"c:\office\document\motto.sxw";"Today's motto") returns a motto in the cell containing this formula. First, you must enter a line in the motto.sxw document containing the motto text and define it as the first line of a section named Today's Motto (in %PRODUCTNAME Writer under Insert - Section). If the motto is modified (and saved) in the %PRODUCTNAME Writer document, the motto is updated in all %PRODUCTNAME Calc cells in which this DDE link is defined. +
+
ERRORTYPE function -ERRORTYPE -Returns the number corresponding to an error value occurring in a different cell. With the aid of this number, you can generate an error message text. - -The Status Bar displays the predefined error code from %PRODUCTNAME if you click the cell containing the error. -Syntax -ERRORTYPE(Reference) - -Reference contains the address of the cell in which the error occurs. -Example -If cell A1 displays Err:518, the function =ERRORTYPE(A1) returns the number 518. -
-
+ERRORTYPE + Returns the number corresponding to an error value occurring in a different cell. With the aid of this number, you can generate an error message text. + + The Status Bar displays the predefined error code from %PRODUCTNAME if you click the cell containing the error. + Syntax + ERRORTYPE(Reference) + + Reference contains the address of the cell in which the error occurs. + Example + If cell A1 displays Err:518, the function =ERRORTYPE(A1) returns the number 518. +
+
INDEX function -INDEX -INDEX returns a sub range, specified by row and column number, or an optional range index. Depending on context, INDEX returns a reference or content.UFI: will change with i4904; see http://so-web.germany.sun.com/iBIS/servlet/edit.ControlPanel?tid=i57108changed by i83070 -Syntax -INDEX(Reference; Row; Column; Range) - -Reference is a reference, entered either directly or by specifying a range name. If the reference consists of multiple ranges, you must enclose the reference or range name in parentheses. - -Row (optional) represents the row index of the reference range, for which to return a value. In case of zero (no specific row) all referenced rows are returned. - -Column (optional) represents the column index of the reference range, for which to return a value. In case of zero (no specific column) all referenced columns are returned. - -Range (optional) represents the index of the subrange if referring to a multiple range. -Example - -=INDEX(Prices;4;1) returns the value from row 4 and column 1 of the database range defined in Data - Define as Prices. - -=INDEX(SumX;4;1) returns the value from the range SumX in row 4 and column 1 as defined in Insert - Names - Define. - -=INDEX(A1:B6;1) returns a reference to the first row of A1:B6. - -=INDEX(A1:B6;0;1) returns a reference to the first column of A1:B6. - -=INDEX((multi);4;1) indicates the value contained in row 4 and column 1 of the (multiple) range, which you named under Insert - Names - Set as multi. The multiple range may consist of several rectangular ranges, each with a row 4 and column 1. If you now want to call the second block of this multiple range enter the number 2 as the range parameter. - -=INDEX(A1:B6;1;1) indicates the value in the upper-left of the A1:B6 range. - -=INDEX((multi);0;0;2) returns a reference to the second range of the multiple range. -
-
+INDEX + INDEX returns a sub range, specified by row and column number, or an optional range index. Depending on context, INDEX returns a reference or content.UFI: will change with i4904; see http://so-web.germany.sun.com/iBIS/servlet/edit.ControlPanel?tid=i57108changed by i83070 + Syntax + INDEX(Reference; Row; Column; Range) + + Reference is a reference, entered either directly or by specifying a range name. If the reference consists of multiple ranges, you must enclose the reference or range name in parentheses. + + Row (optional) represents the row index of the reference range, for which to return a value. In case of zero (no specific row) all referenced rows are returned. + + Column (optional) represents the column index of the reference range, for which to return a value. In case of zero (no specific column) all referenced columns are returned. + + Range (optional) represents the index of the subrange if referring to a multiple range. + Example + + =INDEX(Prices;4;1) returns the value from row 4 and column 1 of the database range defined in Data - Define as Prices. + + =INDEX(SumX;4;1) returns the value from the range SumX in row 4 and column 1 as defined in Insert - Names - Define. + + =INDEX(A1:B6;1) returns a reference to the first row of A1:B6. + + =INDEX(A1:B6;0;1) returns a reference to the first column of A1:B6. + + =INDEX((multi);4;1) indicates the value contained in row 4 and column 1 of the (multiple) range, which you named under Insert - Names - Set as multi. The multiple range may consist of several rectangular ranges, each with a row 4 and column 1. If you now want to call the second block of this multiple range enter the number 2 as the range parameter. + + =INDEX(A1:B6;1;1) indicates the value in the upper-left of the A1:B6 range. + + =INDEX((multi);0;0;2) returns a reference to the second range of the multiple range. +
+
INDIRECT function -INDIRECT -Returns the reference specified by a text string. This function can also be used to return the area of a corresponding string. - -Syntax -INDIRECT(Ref; A1) - -Ref represents a reference to a cell or an area (in text form) for which to return the contents. - -A1 (optional) - if set to 0, the R1C1 notation is used. If this parameter is absent or set to another value than 0, the A1 notation is used. -If you open an Excel spreadsheet that uses indirect addresses calculated from string functions, the sheet addresses will not be translated automatically. For example, the Excel address in INDIRECT("filename!sheetname"&B1) is not converted into the Calc address in INDIRECT("filename.sheetname"&B1).UFI: for #i34465# -INDIRECT cannot resolve range names as in INDIRECT("RangeName").i83070 -Example - -=INDIRECT(A1) equals 100 if A1 contains C108 as a reference and cell C108 contains a value of 100. - -=SUM(INDIRECT("a1:" & ADDRESS(1;3))) totals the cells in the area of A1 up to the cell with the address defined by row 1 and column 3. This means that area A1:C1 is totaled. -
-
+INDIRECT + Returns the reference specified by a text string. This function can also be used to return the area of a corresponding string. + + Syntax + INDIRECT(Ref; A1) + + Ref represents a reference to a cell or an area (in text form) for which to return the contents. + + A1 (optional) - if set to 0, the R1C1 notation is used. If this parameter is absent or set to another value than 0, the A1 notation is used. + For interoperability with Microsoft Excel, the sheet address separator ! is allowed as in INDIRECT("filename!sheetname"&B1).UFI: finally a fix for #i34465# + INDIRECT cannot resolve range names as in INDIRECT("RangeName").i83070 + Example + + =INDIRECT(A1) equals 100 if A1 contains C108 as a reference and cell C108 contains a value of 100. + + =SUM(INDIRECT("a1:" & ADDRESS(1;3))) totals the cells in the area of A1 up to the cell with the address defined by row 1 and column 3. This means that area A1:C1 is totaled. +
+
COLUMN function -COLUMN -Returns the column number of a cell reference. If the reference is a cell the column number of the cell is returned; if the parameter is a cell area, the corresponding column numbers are returned in a single-row array if the formula is entered as an array formula. If the COLUMN function with an area reference parameter is not used for an array formula, only the column number of the first cell within the area is determined. -Syntax -COLUMN(Reference) - -Reference is the reference to a cell or cell area whose first column number is to be found. -If no reference is entered, the column number of the cell in which the formula is entered is found. %PRODUCTNAME Calc automatically sets the reference to the current cell. -Example - -=COLUMN(A1) equals 1. Column A is the first column in the table. - -=COLUMN(C3:E3) equals 3. Column C is the third column in the table. - -=COLUMN(D3:G10) returns 4 because column D is the fourth column in the table and the COLUMN function is not used as an array formula. (In this case, the first value of the array is always used as the result.) - -{=COLUMN(B2:B7)} and =COLUMN(B2:B7) both return 2 because the reference only contains column B as the second column in the table. Because single-column areas have only one column number, it does not make a difference whether or not the formula is used as an array formula. - -=COLUMN() returns 3 if the formula was entered in column C. - -{=COLUMN(Rabbit)} returns the single-row array (3, 4) if "Rabbit" is the named area (C1:D3). -
-
+COLUMN + Returns the column number of a cell reference. If the reference is a cell the column number of the cell is returned; if the parameter is a cell area, the corresponding column numbers are returned in a single-row array if the formula is entered as an array formula. If the COLUMN function with an area reference parameter is not used for an array formula, only the column number of the first cell within the area is determined. + Syntax + COLUMN(Reference) + + Reference is the reference to a cell or cell area whose first column number is to be found. + If no reference is entered, the column number of the cell in which the formula is entered is found. %PRODUCTNAME Calc automatically sets the reference to the current cell. + Example + + =COLUMN(A1) equals 1. Column A is the first column in the table. + + =COLUMN(C3:E3) equals 3. Column C is the third column in the table. + + =COLUMN(D3:G10) returns 4 because column D is the fourth column in the table and the COLUMN function is not used as an array formula. (In this case, the first value of the array is always used as the result.) + + {=COLUMN(B2:B7)} and =COLUMN(B2:B7) both return 2 because the reference only contains column B as the second column in the table. Because single-column areas have only one column number, it does not make a difference whether or not the formula is used as an array formula. + + =COLUMN() returns 3 if the formula was entered in column C. + + {=COLUMN(Rabbit)} returns the single-row array (3, 4) if "Rabbit" is the named area (C1:D3). +
+
COLUMNS function -COLUMNS -Returns the number of columns in the given reference. -Syntax -COLUMNS(Array) - -Array is the reference to a cell range whose total number of columns is to be found. The argument can also be a single cell. -Example - -=COLUMNS(B5) returns 1 because a cell only contains one column. - -=COLUMNS(A1:C5) equals 3. The reference comprises three columns. - -=COLUMNS(Rabbit) returns 2 if Rabbit is the named range (C1:D3). -
-
+COLUMNS + Returns the number of columns in the given reference. + Syntax + COLUMNS(Array) + + Array is the reference to a cell range whose total number of columns is to be found. The argument can also be a single cell. + Example + + =COLUMNS(B5) returns 1 because a cell only contains one column. + + =COLUMNS(A1:C5) equals 3. The reference comprises three columns. + + =COLUMNS(Rabbit) returns 2 if Rabbit is the named range (C1:D3). +
+
vertical search function -VLOOKUP function + VLOOKUP function -VLOOKUP -Vertical search with reference to adjacent cells to the right. This function checks if a specific value is contained in the first column of an array. The function then returns the value in the same row of the column named by Index. If the SortOrder parameter is omitted or set to TRUE or one, it is assumed that the data is sorted in ascending order. In this case, if the exact SearchCriterion is not found, the last value that is smaller than the criterion will be returned. If SortOrder is set to FALSE or zero, an exact match must be found, otherwise the error Error: Value Not Available will be the result. Thus with a value of zero the data does not need to be sorted in ascending order. - -Syntax -=VLOOKUP(SearchCriterion; Array; Index; SortOrder) - -SearchCriterion is the value searched for in the first column of the array. - -Array is the reference, which is to comprise at least two columns. - -Index is the number of the column in the array that contains the value to be returned. The first column has the number 1. - -SortOrder is an optional parameter that indicates whether the first column in the array is sorted in ascending order. Enter the Boolean value FALSE or zero if the first column is not sorted in ascending order. Sorted columns can be searched much faster and the function always returns a value, even if the search value was not matched exactly, if it is between the lowest and highest value of the sorted list. In unsorted lists, the search value must be matched exactly. Otherwise the function will return this message: Error: Value Not Available. - -Example -You want to enter the number of a dish on the menu in cell A1, and the name of the dish is to appear as text in the neighboring cell (B1) immediately. The Number to Name assignment is contained in the D1:E100 array. D1 contains 100, E1 contains the name Vegetable Soup, and so forth, for 100 menu items. The numbers in column D are sorted in ascending order; thus, the optional SortOrder parameter is not necessary. -Enter the following formula in B1: - -=VLOOKUP(A1;D1:E100;2) - -As soon as you enter a number in A1 B1 will show the corresponding text contained in the second column of reference D1:E100. Entering a nonexistent number displays the text with the next number down. To prevent this, enter FALSE as the last parameter in the formula so that an error message is generated when a nonexistent number is entered. -
-
+VLOOKUP + Vertical search with reference to adjacent cells to the right. This function checks if a specific value is contained in the first column of an array. The function then returns the value in the same row of the column named by Index. If the SortOrder parameter is omitted or set to TRUE or one, it is assumed that the data is sorted in ascending order. In this case, if the exact SearchCriterion is not found, the last value that is smaller than the criterion will be returned. If SortOrder is set to FALSE or zero, an exact match must be found, otherwise the error Error: Value Not Available will be the result. Thus with a value of zero the data does not need to be sorted in ascending order. + + Syntax + =VLOOKUP(SearchCriterion; Array; Index; SortOrder) + + SearchCriterion is the value searched for in the first column of the array. + + Array is the reference, which is to comprise at least two columns. + + Index is the number of the column in the array that contains the value to be returned. The first column has the number 1. + + SortOrder is an optional parameter that indicates whether the first column in the array is sorted in ascending order. Enter the Boolean value FALSE or zero if the first column is not sorted in ascending order. Sorted columns can be searched much faster and the function always returns a value, even if the search value was not matched exactly, if it is between the lowest and highest value of the sorted list. In unsorted lists, the search value must be matched exactly. Otherwise the function will return this message: Error: Value Not Available. + + Example + You want to enter the number of a dish on the menu in cell A1, and the name of the dish is to appear as text in the neighboring cell (B1) immediately. The Number to Name assignment is contained in the D1:E100 array. D1 contains 100, E1 contains the name Vegetable Soup, and so forth, for 100 menu items. The numbers in column D are sorted in ascending order; thus, the optional SortOrder parameter is not necessary. + Enter the following formula in B1: + + =VLOOKUP(A1;D1:E100;2) + + As soon as you enter a number in A1 B1 will show the corresponding text contained in the second column of reference D1:E100. Entering a nonexistent number displays the text with the next number down. To prevent this, enter FALSE as the last parameter in the formula so that an error message is generated when a nonexistent number is entered. +
+
sheet numbers; looking up -SHEET function + SHEET function -SHEET -Returns the sheet number of a reference or a string representing a sheet name. If you do not enter any parameters, the result is the sheet number of the spreadsheet containing the formula. -Syntax -SHEET(Reference) - -Reference is optional and is the reference to a cell, an area, or a sheet name string. -Example - -=SHEET(Sheet2.A1) returns 2 if Sheet2 is the second sheet in the spreadsheet document. -
-
+SHEET + Returns the sheet number of a reference or a string representing a sheet name. If you do not enter any parameters, the result is the sheet number of the spreadsheet containing the formula. + Syntax + SHEET(Reference) + + Reference is optional and is the reference to a cell, an area, or a sheet name string. + Example + + =SHEET(Sheet2.A1) returns 2 if Sheet2 is the second sheet in the spreadsheet document. +
+
number of sheets; function -SHEETS function + SHEETS function -SHEETS -Determines the number of sheets in a reference. If you do not enter any parameters, it returns the number of sheets in the current document. -Syntax -SHEETS(Reference) - -Reference is the reference to a sheet or an area. This parameter is optional. -Example - -=SHEETS(Sheet1.A1:Sheet3.G12) returns 3 if Sheet1, Sheet2, and Sheet3 exist in the sequence indicated. -
-
+SHEETS + Determines the number of sheets in a reference. If you do not enter any parameters, it returns the number of sheets in the current document. + Syntax + SHEETS(Reference) + + Reference is the reference to a sheet or an area. This parameter is optional. + Example + + =SHEETS(Sheet1.A1:Sheet3.G12) returns 3 if Sheet1, Sheet2, and Sheet3 exist in the sequence indicated. +
+
MATCH function -MATCH -Returns the relative position of an item in an array that matches a specified value. The function returns the position of the value found in the lookup_array as a number. -Syntax -MATCH(SearchCriterion; LookupArray; Type) - -SearchCriterion is the value which is to be searched for in the single-row or single-column array. - -LookupArray is the reference searched. A lookup array can be a single row or column, or part of a single row or column. - -Type may take the values 1, 0, or -1. If Type = 1 or if this optional parameter is missing, it is assumed that the first column of the search array is sorted in ascending order. If Type = -1 it is assumed that the column in sorted in descending order. This corresponds to the same function in Microsoft Excel. -If Type = 0, only exact matches are found. If the search criterion is found more than once, the function returns the index of the first matching value. Only if Type = 0 can you search for regular expressions. -If Type = 1 or the third parameter is missing, the index of the last value that is smaller or equal to the search criterion is returned. This applies even when the search array is not sorted. For Type = -1, the first value that is larger or equal is returned. - -Example - -=MATCH(200;D1:D100) searches the area D1:D100, which is sorted by column D, for the value 200. As soon as this value is reached, the number of the row in which it was found is returned. If a higher value is found during the search in the column, the number of the previous row is returned. -
-
+MATCH + Returns the relative position of an item in an array that matches a specified value. The function returns the position of the value found in the lookup_array as a number. + Syntax + MATCH(SearchCriterion; LookupArray; Type) + + SearchCriterion is the value which is to be searched for in the single-row or single-column array. + + LookupArray is the reference searched. A lookup array can be a single row or column, or part of a single row or column. + + Type may take the values 1, 0, or -1. If Type = 1 or if this optional parameter is missing, it is assumed that the first column of the search array is sorted in ascending order. If Type = -1 it is assumed that the column in sorted in descending order. This corresponds to the same function in Microsoft Excel. + If Type = 0, only exact matches are found. If the search criterion is found more than once, the function returns the index of the first matching value. Only if Type = 0 can you search for regular expressions. + If Type = 1 or the third parameter is missing, the index of the last value that is smaller or equal to the search criterion is returned. This applies even when the search array is not sorted. For Type = -1, the first value that is larger or equal is returned. + + Example + + =MATCH(200;D1:D100) searches the area D1:D100, which is sorted by column D, for the value 200. As soon as this value is reached, the number of the row in which it was found is returned. If a higher value is found during the search in the column, the number of the previous row is returned. +
+
OFFSET function -OFFSET -Returns the value of a cell offset by a certain number of rows and columns from a given reference point. -Syntax -OFFSET(Reference; Rows; Columns; Height; Width) - -Reference is the reference from which the function searches for the new reference. - -Rows is the number of rows by which the reference was corrected up (negative value) or down. - -Columns (optional) is the number of columns by which the reference was corrected to the left (negative value) or to the right. - -Height (optional) is the vertical height for an area that starts at the new reference position. - -Width (optional) is the horizontal width for an area that starts at the new reference position. -Arguments Rows and Columns must not lead to zero or negative start row or column -Arguments Height and Width must not lead to zero or negative count of rows or columns. - - - -Example - -=OFFSET(A1;2;2) returns the value in cell C3 (A1 moved by two rows and two columns down). If C3 contains the value 100 this function returns the value 100. - -=OFFSET(B2:C3;1;1) returns a reference to B2:C3 moved down by 1 row and one column to the right (C3:D4). - -=OFFSET(B2:C3;-1;-1) returns a reference to B2:C3 moved up by 1 row and one column to the left (A1:B2). - -=OFFSET(B2:C3;0;0;3;4) returns a reference to B2:C3 resized to 3 rows and 4 columns (B2:E4). - -=OFFSET(B2:C3;1;0;3;4) returns a reference to B2:C3 moved down by one row resized to 3 rows and 4 columns (B2:E4). - -=SUM(OFFSET(A1;2;2;5;6)) determines the total of the area that starts in cell C3 and has a height of 5 rows and a width of 6 columns (area=C3:H7). -
-
+OFFSET + Returns the value of a cell offset by a certain number of rows and columns from a given reference point. + Syntax + OFFSET(Reference; Rows; Columns; Height; Width) + + Reference is the reference from which the function searches for the new reference. + + Rows is the number of rows by which the reference was corrected up (negative value) or down. + + Columns (optional) is the number of columns by which the reference was corrected to the left (negative value) or to the right. + + Height (optional) is the vertical height for an area that starts at the new reference position. + + Width (optional) is the horizontal width for an area that starts at the new reference position. + Arguments Rows and Columns must not lead to zero or negative start row or column + Arguments Height and Width must not lead to zero or negative count of rows or columns. + + + + Example + + =OFFSET(A1;2;2) returns the value in cell C3 (A1 moved by two rows and two columns down). If C3 contains the value 100 this function returns the value 100. + + =OFFSET(B2:C3;1;1) returns a reference to B2:C3 moved down by 1 row and one column to the right (C3:D4). + + =OFFSET(B2:C3;-1;-1) returns a reference to B2:C3 moved up by 1 row and one column to the left (A1:B2). + + =OFFSET(B2:C3;0;0;3;4) returns a reference to B2:C3 resized to 3 rows and 4 columns (B2:E4). + + =OFFSET(B2:C3;1;0;3;4) returns a reference to B2:C3 moved down by one row resized to 3 rows and 4 columns (B2:E4). + + =SUM(OFFSET(A1;2;2;5;6)) determines the total of the area that starts in cell C3 and has a height of 5 rows and a width of 6 columns (area=C3:H7). +
+
LOOKUP function -LOOKUP -Returns the contents of a cell either from a one-row or one-column range. Optionally, the assigned value (of the same index) is returned in a different column and row. As opposed to VLOOKUP and HLOOKUP, search and result vector may be at different positions; they do not have to be adjacent. Additionally, the search vector for the LOOKUP must be sorted ascending, otherwise the search will not return any usable results. -If LOOKUP cannot find the search criterion, it matches the largest value in the search vector that is less than or equal to the search criterion. - -Syntax -LOOKUP(SearchCriterion; SearchVector; ResultVector) - -SearchCriterion is the value to be searched for; entered either directly or as a reference. - -SearchVector is the single-row or single-column area to be searched. - -ResultVector is another single-row or single-column range from which the result of the function is taken. The result is the cell of the result vector with the same index as the instance found in the search vector. - -Example - -=LOOKUP(A1;D1:D100;F1:F100) searches the corresponding cell in range D1:D100 for the number you entered in A1. For the instance found, the index is determined, for example, the 12th cell in this range. Then, the contents of the 12th cell are returned as the value of the function (in the result vector). -
-
+LOOKUP + Returns the contents of a cell either from a one-row or one-column range. Optionally, the assigned value (of the same index) is returned in a different column and row. As opposed to VLOOKUP and HLOOKUP, search and result vector may be at different positions; they do not have to be adjacent. Additionally, the search vector for the LOOKUP must be sorted ascending, otherwise the search will not return any usable results. + If LOOKUP cannot find the search criterion, it matches the largest value in the search vector that is less than or equal to the search criterion. + + Syntax + LOOKUP(SearchCriterion; SearchVector; ResultVector) + + SearchCriterion is the value to be searched for; entered either directly or as a reference. + + SearchVector is the single-row or single-column area to be searched. + + ResultVector is another single-row or single-column range from which the result of the function is taken. The result is the cell of the result vector with the same index as the instance found in the search vector. + + Example + + =LOOKUP(A1;D1:D100;F1:F100) searches the corresponding cell in range D1:D100 for the number you entered in A1. For the instance found, the index is determined, for example, the 12th cell in this range. Then, the contents of the 12th cell are returned as the value of the function (in the result vector). +
+
STYLE function -STYLE -Applies a style to the cell containing the formula. After a set amount of time, another style can be applied. This function always returns the value 0, allowing you to add it to another function without changing the value. Together with the CURRENT function you can apply a color to a cell regardless of the value. For example: =...+STYLE(IF(CURRENT()>3;"red";"green")) applies the style "red" to the cell if the value is greater than 3, otherwise the style "green" is applied. Both cell formats have to be defined beforehand. -Syntax -STYLE("Style"; Time; "Style2") - -Style is the name of a cell style assigned to the cell. Style names must be entered in quotation marks. - -Time is an optional time range in seconds. If this parameter is missing the style will not be changed after a certain amount of time has passed. - -Style2 is the optional name of a cell style assigned to the cell after a certain amount of time has passed. If this parameter is missing "Default" is assumed. - - - -Example - -=STYLE("Invisible";60;"Default") formats the cell in transparent format for 60 seconds after the document was recalculated or loaded, then the Default format is assigned. Both cell formats have to be defined beforehand. -Since STYLE() has a numeric return value of zero, this return value gets appended to a string. This can be avoided using T() as in the following example - -="Text"&T(STYLE("myStyle")) - -See also CURRENT() for another example. -
-
+STYLE + Applies a style to the cell containing the formula. After a set amount of time, another style can be applied. This function always returns the value 0, allowing you to add it to another function without changing the value. Together with the CURRENT function you can apply a color to a cell regardless of the value. For example: =...+STYLE(IF(CURRENT()>3;"red";"green")) applies the style "red" to the cell if the value is greater than 3, otherwise the style "green" is applied. Both cell formats have to be defined beforehand. + Syntax + STYLE("Style"; Time; "Style2") + + Style is the name of a cell style assigned to the cell. Style names must be entered in quotation marks. + + Time is an optional time range in seconds. If this parameter is missing the style will not be changed after a certain amount of time has passed. + + Style2 is the optional name of a cell style assigned to the cell after a certain amount of time has passed. If this parameter is missing "Default" is assumed. + + + + Example + + =STYLE("Invisible";60;"Default") formats the cell in transparent format for 60 seconds after the document was recalculated or loaded, then the Default format is assigned. Both cell formats have to be defined beforehand. + Since STYLE() has a numeric return value of zero, this return value gets appended to a string. This can be avoided using T() as in the following example + + ="Text"&T(STYLE("myStyle")) + + See also CURRENT() for another example. +
+
CHOOSE function -CHOOSE -Uses an index to return a value from a list of up to 30 values. -Syntax -CHOOSE(Index; Value1; ...; Value30) - -Index is a reference or number between 1 and 30 indicating which value is to be taken from the list. - -Value1...Value30 is the list of values entered as a reference to a cell or as individual values. -Example - -=CHOOSE(A1;B1;B2;B3;"Today";"Yesterday";"Tomorrow"), for example, returns the contents of cell B2 for A1 = 2; for A1 = 4, the function returns the text "Today". -
-
+CHOOSE + Uses an index to return a value from a list of up to 30 values. + Syntax + CHOOSE(Index; Value1; ...; Value30) + + Index is a reference or number between 1 and 30 indicating which value is to be taken from the list. + + Value1...Value30 is the list of values entered as a reference to a cell or as individual values. + Example + + =CHOOSE(A1;B1;B2;B3;"Today";"Yesterday";"Tomorrow"), for example, returns the contents of cell B2 for A1 = 2; for A1 = 4, the function returns the text "Today". +
+
HLOOKUP function -HLOOKUP -Searches for a value and reference to the cells below the selected area. This function verifies if the first row of an array contains a certain value. The function returns then the value in a row of the array, named in the Index, in the same column. - -Syntax -HLOOKUP(SearchCriteria; Array; Index; Sorted) -See also:VLOOKUP (columns and rows are exchanged) - -
-
+HLOOKUP + Searches for a value and reference to the cells below the selected area. This function verifies if the first row of an array contains a certain value. The function returns then the value in a row of the array, named in the Index, in the same column. + + Syntax + HLOOKUP(SearchCriteria; Array; Index; Sorted) + See also:VLOOKUP (columns and rows are exchanged) + +
+
ROW function -ROW -Returns the row number of a cell reference. If the reference is a cell, it returns the row number of the cell. If the reference is a cell range, it returns the corresponding row numbers in a one-column Array if the formula is entered as an array formula. If the ROW function with a range reference is not used in an array formula, only the row number of the first range cell will be returned. -Syntax -ROW(Reference) - -Reference is a cell, an area, or the name of an area. -If you do not indicate a reference, the row number of the cell in which the formula is entered will be found. %PRODUCTNAME Calc automatically sets the reference to the current cell. -Example - -=ROW(B3) returns 3 because the reference refers to the third row in the table. - -{=ROW(D5:D8)} returns the single-column array (5, 6, 7, 8) because the reference specified contains rows 5 through 8. - -=ROW(D5:D8) returns 5 because the ROW function is not used as array formula and only the number of the first row of the reference is returned. - -{=ROW(A1:E1)} and =ROW(A1:E1) both return 1 because the reference only contains row 1 as the first column in the table. (Because single-row areas only have one row number it does not make any difference whether or not the formula is used as an array formula.) - -=ROW() returns 3 if the formula was entered in row 3. - -{=ROW(Rabbit)} returns the single-column array (1, 2, 3) if "Rabbit" is the named area (C1:D3). -
-
+ROW + Returns the row number of a cell reference. If the reference is a cell, it returns the row number of the cell. If the reference is a cell range, it returns the corresponding row numbers in a one-column Array if the formula is entered as an array formula. If the ROW function with a range reference is not used in an array formula, only the row number of the first range cell will be returned. + Syntax + ROW(Reference) + + Reference is a cell, an area, or the name of an area. + If you do not indicate a reference, the row number of the cell in which the formula is entered will be found. %PRODUCTNAME Calc automatically sets the reference to the current cell. + Example + + =ROW(B3) returns 3 because the reference refers to the third row in the table. + + {=ROW(D5:D8)} returns the single-column array (5, 6, 7, 8) because the reference specified contains rows 5 through 8. + + =ROW(D5:D8) returns 5 because the ROW function is not used as array formula and only the number of the first row of the reference is returned. + + {=ROW(A1:E1)} and =ROW(A1:E1) both return 1 because the reference only contains row 1 as the first column in the table. (Because single-row areas only have one row number it does not make any difference whether or not the formula is used as an array formula.) + + =ROW() returns 3 if the formula was entered in row 3. + + {=ROW(Rabbit)} returns the single-column array (1, 2, 3) if "Rabbit" is the named area (C1:D3). +
+
ROWS function -ROWS -Returns the number of rows in a reference or array. -Syntax -ROWS(Array) - -Array is the reference or named area whose total number of rows is to be determined. -Example - -=Rows(B5) returns 1 because a cell only contains one row. - -=ROWS(A10:B12) returns 3. - -=ROWS(Rabbit) returns 3 if "Rabbit" is the named area (C1:D3). -
-
+ROWS + Returns the number of rows in a reference or array. + Syntax + ROWS(Array) + + Array is the reference or named area whose total number of rows is to be determined. + Example + + =Rows(B5) returns 1 because a cell only contains one row. + + =ROWS(A10:B12) returns 3. + + =ROWS(Rabbit) returns 3 if "Rabbit" is the named area (C1:D3). +
+
HYPERLINK function -HYPERLINK -When you click a cell that contains the HYPERLINK function, the hyperlink opens. -If you use the optional cell text parameter, the formula locates the URL, and then displays the text. -To open a hyperlinked cell with the keyboard, select the cell, press F2 to enter the Edit mode, move the cursor in front of the hyperlink, press Shift+F10, and then choose Open Hyperlink. -Syntax -HYPERLINK("URL") or HYPERLINK("URL"; "CellText") - -URL specifies the link target. The optional CellText parameter is the text that is displayed in the cell and the result of the function. If the CellText parameter is not specified, the URL is displayed in the cell text and in the result of the function. -Example - -=HYPERLINK("http://www.example.org") displays the text "http://www.example.org" in the cell and executes the hyperlink http://www.example.org when clicked. - -=HYPERLINK("http://www.example.org";"Click here") displays the text "Click here" in the cell and executes the hyperlink http://www.example.org when clicked. - -=HYPERLINK($B4) where cell B4 contains http://www.example.org. The function adds http://www.example.org to the URL of the hyperlink cell and returns the same text which is used as formula result. - -=HYPERLINK("http://www.";"Click ") & "example.org" displays the text Click example.org in the cell and executes the hyperlink http://www.example.org when clicked. - -=HYPERLINK("#Sheet1.A1";"Go to top") displays the text Go to top and jumps to cell Sheet1.A1 in this document. - -=HYPERLINK("file:///C:/writer.odt#Specification";"Go to Writer bookmark") displays the text Go to Writer bookmark, loads the specified text document and jumps to bookmark "Specification". -
-
+HYPERLINK + When you click a cell that contains the HYPERLINK function, the hyperlink opens. + If you use the optional cell text parameter, the formula locates the URL, and then displays the text. + To open a hyperlinked cell with the keyboard, select the cell, press F2 to enter the Edit mode, move the cursor in front of the hyperlink, press Shift+F10, and then choose Open Hyperlink. + Syntax + HYPERLINK("URL") or HYPERLINK("URL"; "CellText") + + URL specifies the link target. The optional CellText parameter is the text that is displayed in the cell and the result of the function. If the CellText parameter is not specified, the URL is displayed in the cell text and in the result of the function. + Example + + =HYPERLINK("http://www.example.org") displays the text "http://www.example.org" in the cell and executes the hyperlink http://www.example.org when clicked. + + =HYPERLINK("http://www.example.org";"Click here") displays the text "Click here" in the cell and executes the hyperlink http://www.example.org when clicked. + + =HYPERLINK($B4) where cell B4 contains http://www.example.org. The function adds http://www.example.org to the URL of the hyperlink cell and returns the same text which is used as formula result. + + =HYPERLINK("http://www.";"Click ") & "example.org" displays the text Click example.org in the cell and executes the hyperlink http://www.example.org when clicked. + + =HYPERLINK("#Sheet1.A1";"Go to top") displays the text Go to top and jumps to cell Sheet1.A1 in this document. + + =HYPERLINK("file:///C:/writer.odt#Specification";"Go to Writer bookmark") displays the text Go to Writer bookmark, loads the specified text document and jumps to bookmark "Specification". +
+
GETPIVOTDATA function -GETPIVOTDATA -The GETPIVOTDATA function returns a result value from a DataPilot table. The value is addressed using field and item names, so it remains valid if the layout of the DataPilot table changes. -Syntax -Two different syntax definitions can be used: -GETPIVOTDATA(TargetField; DataPilot; [ Field 1; Item 1; ... ]) -GETPIVOTDATA(DataPilot; Constraints) -The second syntax is assumed if exactly two parameters are given, of which the first parameter is a cell or cell range reference. The first syntax is assumed in all other cases. The Function Wizard shows the first syntax. -First Syntax - -TargetField is a string that selects one of the DataPilot table's data fields. The string can be the name of the source column, or the data field name as shown in the table (like "Sum - Sales"). - -DataPilot is a reference to a cell or cell range that is positioned within a DataPilot table or contains a DataPilot table. If the cell range contains several DataPilot tables, the table that was created last is used. -If no Field n / Item n pairs are given, the grand total is returned. Otherwise, each pair adds a constraint that the result must satisfy. Field n is the name of a field from the DataPilot table. Item n is the name of an item from that field. -If the DataPilot table contains only a single result value that fulfills all of the constraints, or a subtotal result that summarizes all matching values, that result is returned. If there is no matching result, or several ones without a subtotal for them, an error is returned. These conditions apply to results that are included in the DataPilot table. -If the source data contains entries that are hidden by settings of the DataPilot table, they are ignored. The order of the Field/Item pairs is not significant. Field and item names are not case-sensitive. -If no constraint for a page field is given, the field's selected value is implicitly used. If a constraint for a page field is given, it must match the field's selected value, or an error is returned. Page fields are the fields at the top left of a DataPilot table, populated using the "Page Fields" area of the DataPilot Layout dialog. From each page field, an item (value) can be selected, which means only that item is included in the calculation. -Subtotal values from the DataPilot table are only used if they use the function "auto" (except when specified in the constraint, see Second Syntax below). -Second Syntax - -DataPilot has the same meaning as in the first syntax. - -Constraints is a space-separated list. Entries can be quoted (single quotes). The whole string must be enclosed in quotes (double quotes), unless you reference the string from another cell. -One of the entries can be the data field name. The data field name can be left out if the DataPilot table contains only one data field, otherwise it must be present. -Each of the other entries specifies a constraint in the form Field[Item] (with literal characters [ and ]), or only Item if the item name is unique within all fields that are used in the DataPilot table.i82342 -A function name can be added in the form Field[Item;Function], which will cause the constraint to match only subtotal values which use that function. The possible function names are Sum, Count, Average, Max, Min, Product, Count (Numbers only), StDev (Sample), StDevP (Population), Var (Sample), and VarP (Population), case-insensitive.UFI: Example from spec doc is quite difficult to localize. Try to find other one +GETPIVOTDATA + The GETPIVOTDATA function returns a result value from a DataPilot table. The value is addressed using field and item names, so it remains valid if the layout of the DataPilot table changes. + Syntax + Two different syntax definitions can be used: + GETPIVOTDATA(TargetField; DataPilot; [ Field 1; Item 1; ... ]) + GETPIVOTDATA(DataPilot; Constraints) + The second syntax is assumed if exactly two parameters are given, of which the first parameter is a cell or cell range reference. The first syntax is assumed in all other cases. The Function Wizard shows the first syntax. + First Syntax + + TargetField is a string that selects one of the DataPilot table's data fields. The string can be the name of the source column, or the data field name as shown in the table (like "Sum - Sales"). + + DataPilot is a reference to a cell or cell range that is positioned within a DataPilot table or contains a DataPilot table. If the cell range contains several DataPilot tables, the table that was created last is used. + If no Field n / Item n pairs are given, the grand total is returned. Otherwise, each pair adds a constraint that the result must satisfy. Field n is the name of a field from the DataPilot table. Item n is the name of an item from that field. + If the DataPilot table contains only a single result value that fulfills all of the constraints, or a subtotal result that summarizes all matching values, that result is returned. If there is no matching result, or several ones without a subtotal for them, an error is returned. These conditions apply to results that are included in the DataPilot table. + If the source data contains entries that are hidden by settings of the DataPilot table, they are ignored. The order of the Field/Item pairs is not significant. Field and item names are not case-sensitive. + If no constraint for a page field is given, the field's selected value is implicitly used. If a constraint for a page field is given, it must match the field's selected value, or an error is returned. Page fields are the fields at the top left of a DataPilot table, populated using the "Page Fields" area of the DataPilot Layout dialog. From each page field, an item (value) can be selected, which means only that item is included in the calculation. + Subtotal values from the DataPilot table are only used if they use the function "auto" (except when specified in the constraint, see Second Syntax below). + Second Syntax + + DataPilot has the same meaning as in the first syntax. + + Constraints is a space-separated list. Entries can be quoted (single quotes). The whole string must be enclosed in quotes (double quotes), unless you reference the string from another cell. + One of the entries can be the data field name. The data field name can be left out if the DataPilot table contains only one data field, otherwise it must be present. + Each of the other entries specifies a constraint in the form Field[Item] (with literal characters [ and ]), or only Item if the item name is unique within all fields that are used in the DataPilot table.i82342 + A function name can be added in the form Field[Item;Function], which will cause the constraint to match only subtotal values which use that function. The possible function names are Sum, Count, Average, Max, Min, Product, Count (Numbers only), StDev (Sample), StDevP (Population), Var (Sample), and VarP (Population), case-insensitive.UFI: Example from spec doc is quite difficult to localize. Try to find other one
- -
- - + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/01/04060116.xhp b/helpcontent2/source/text/scalc/01/04060116.xhp index 680b85d3ce..c416f15632 100755 --- a/helpcontent2/source/text/scalc/01/04060116.xhp +++ b/helpcontent2/source/text/scalc/01/04060116.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 04060116.xhp,v $ - * $Revision: 1.11.4.2 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,499 +35,547 @@ - -Add-in Functions, List of Analysis Functions Part Two -/text/scalc/01/04060116.xhp - - - + + Add-in Functions, List of Analysis Functions Part Two + /text/scalc/01/04060116.xhp + + + imaginary numbers in analysis functions -complex numbers in analysis functions + complex numbers in analysis functions -Add-in Functions, List of Analysis Functions Part Two -
- -
-
-Category Statistics -Analysis Functions Part One -Back to the Overview -
+Add-in Functions, List of Analysis Functions Part Two +
+ +
+
+ Category Statistics + Analysis Functions Part One + Back to the Overview +
- + IMABS function -IMABS -The result is the absolute value of a complex number. -Syntax -IMABS("ComplexNumber") -ComplexNumber is a complex number that is entered in the form "x+yi" or "x+yj". +IMABS + The result is the absolute value of a complex number. + Syntax + IMABS("ComplexNumber") + ComplexNumber is a complex number that is entered in the form "x+yi" or "x+yj". no blanks allowed, see i82522 -Example - -=IMABS("5+12j") returns 13. -
-
+ Example + + =IMABS("5+12j") returns 13. +
+
IMAGINARY function -IMAGINARY -The result is the imaginary coefficient of a complex number. -Syntax -IMAGINARY("ComplexNumber") - -Example - -=IMAGINARY("4+3j") returns 3. -
-
+IMAGINARY + The result is the imaginary coefficient of a complex number. + Syntax + IMAGINARY("ComplexNumber") + + Example + + =IMAGINARY("4+3j") returns 3. +
+
IMPOWER function -IMPOWER -The result is the integer power of a complex number. -Syntax -IMPOWER("ComplexNumber"; Number) - - -Number is the exponent. -Example - -=IMPOWER("2+3i";2) returns -5+12i. -
-
+IMPOWER + The result is the integer power of a complex number. + Syntax + IMPOWER("ComplexNumber"; Number) + + + Number is the exponent. + Example + + =IMPOWER("2+3i";2) returns -5+12i. +
+
IMARGUMENT function -IMARGUMENT -The result is the argument (the phi angle) of a complex number. -Syntax -IMARGUMENT("ComplexNumber") - -Example - -=IMARGUMENT("3+4j") returns 0.927295. -
-
+IMARGUMENT + The result is the argument (the phi angle) of a complex number. + Syntax + IMARGUMENT("ComplexNumber") + + Example + + =IMARGUMENT("3+4j") returns 0.927295. +
+
IMCOS function -IMCOS -The result is the cosine of a complex number. -Syntax -IMCOS("ComplexNumber") - -Example - -=IMCOS("3+4j") returns -27.03-3.85i (rounded). -
-
+IMCOS + The result is the cosine of a complex number. + Syntax + IMCOS("ComplexNumber") + + Example + + =IMCOS("3+4j") returns -27.03-3.85i (rounded). +
+
IMDIV function -IMDIV -The result is the division of two complex numbers. -Syntax -IMDIV("Numerator"; "Denominator") - -Numerator, Denominator are complex numbers that are entered in the form "x+yi" or "x+yj". -Example - -=IMDIV("-238+240i";"10+24i") returns 5+12i. -
-
+IMDIV + The result is the division of two complex numbers. + Syntax + IMDIV("Numerator"; "Denominator") + + Numerator, Denominator are complex numbers that are entered in the form "x+yi" or "x+yj". + Example + + =IMDIV("-238+240i";"10+24i") returns 5+12i. +
+
IMEXP function -IMEXP -The result is the power of e and the complex number. The constant e has a value of approximately 2.71828182845904. -Syntax -IMEXP("ComplexNumber") - -Example - -=IMEXP("1+j") returns 1.47+2.29j (rounded). -
-
+IMEXP + The result is the power of e and the complex number. The constant e has a value of approximately 2.71828182845904. + Syntax + IMEXP("ComplexNumber") + + Example + + =IMEXP("1+j") returns 1.47+2.29j (rounded). +
+
IMCONJUGATE function -IMCONJUGATE -The result is the conjugated complex complement to a complex number. -Syntax -IMCONJUGATE("ComplexNumber") - -Example - -=IMCONJUGATE("1+j") returns 1-j. -
-
+IMCONJUGATE + The result is the conjugated complex complement to a complex number. + Syntax + IMCONJUGATE("ComplexNumber") + + Example + + =IMCONJUGATE("1+j") returns 1-j. +
+
IMLN function -IMLN -The result is the natural logarithm (to the base e) of a complex number. The constant e has a value of approximately 2.71828182845904. -Syntax -IMLN("ComplexNumber") - -Example - -=IMLN("1+j") returns 0.35+0.79j (rounded). -
-
+IMLN + The result is the natural logarithm (to the base e) of a complex number. The constant e has a value of approximately 2.71828182845904. + Syntax + IMLN("ComplexNumber") + + Example + + =IMLN("1+j") returns 0.35+0.79j (rounded). +
+
IMLOG10 function -IMLOG10 -The result is the common logarithm (to the base 10) of a complex number. -Syntax -IMLOG10("ComplexNumber") - -Example - -=IMLOG10("1+j") returns 0.15+0.34j (rounded). -
-
+IMLOG10 + The result is the common logarithm (to the base 10) of a complex number. + Syntax + IMLOG10("ComplexNumber") + + Example + + =IMLOG10("1+j") returns 0.15+0.34j (rounded). +
+
IMLOG2 function -IMLOG2 -The result is the binary logarithm of a complex number. -Syntax -IMLOG2("ComplexNumber") - -Example - -=IMLOG2("1+j") returns 0.50+1.13j (rounded). -
-
+IMLOG2 + The result is the binary logarithm of a complex number. + Syntax + IMLOG2("ComplexNumber") + + Example + + =IMLOG2("1+j") returns 0.50+1.13j (rounded). +
+
IMPRODUCT function -IMPRODUCT -The result is the product of up to 29 complex numbers. -Syntax -IMPRODUCT("ComplexNumber"; "ComplexNumber1"; ...) - -Example - -=IMPRODUCT("3+4j";"5-3j") returns 27+11j. -
-
+IMPRODUCT + The result is the product of up to 29 complex numbers. + Syntax + IMPRODUCT("ComplexNumber"; "ComplexNumber1"; ...) + + Example + + =IMPRODUCT("3+4j";"5-3j") returns 27+11j. +
+
IMREAL function -IMREAL -The result is the real coefficient of a complex number. -Syntax -IMREAL("ComplexNumber") - -Example - -=IMREAL("1+3j") returns 1. -
-
+IMREAL + The result is the real coefficient of a complex number. + Syntax + IMREAL("ComplexNumber") + + Example + + =IMREAL("1+3j") returns 1. +
+
IMSIN function -IMSIN -The result is the sine of a complex number. -Syntax -IMSIN("ComplexNumber") - -Example - -=IMSIN("3+4j") returns 3.85+27.02j (rounded). -
-
+IMSIN + The result is the sine of a complex number. + Syntax + IMSIN("ComplexNumber") + + Example + + =IMSIN("3+4j") returns 3.85+27.02j (rounded). +
+
IMSUB function -IMSUB -The result is the subtraction of two complex numbers. -Syntax -IMSUB("ComplexNumber1"; "ComplexNumber2") - -Example - -=IMSUB("13+4j";"5+3j") returns 8+j. -
-
+IMSUB + The result is the subtraction of two complex numbers. + Syntax + IMSUB("ComplexNumber1"; "ComplexNumber2") + + Example + + =IMSUB("13+4j";"5+3j") returns 8+j. +
+
IMSUM function -IMSUM -The result is the sum of up to 29 complex numbers. -Syntax -IMSUM("ComplexNumber1"; "ComplexNumber2"; ...) - -Example - -=IMSUM("13+4j";"5+3j") returns 18+7j. -
-
+IMSUM + The result is the sum of up to 29 complex numbers. + Syntax + IMSUM("ComplexNumber1"; "ComplexNumber2"; ...) + + Example + + =IMSUM("13+4j";"5+3j") returns 18+7j. +
+
IMSQRT function -IMSQRT -The result is the square root of a complex number. -Syntax -IMSQRT("ComplexNumber") - -Example - -=IMSQRT("3+4i") returns 2+1i. -
-
+IMSQRT + The result is the square root of a complex number. + Syntax + IMSQRT("ComplexNumber") + + Example + + =IMSQRT("3+4i") returns 2+1i. +
+
COMPLEX function -COMPLEX -The result is a complex number which is returned from a real coefficient and an imaginary coefficient. -Syntax -COMPLEX(RealNum; INum; Suffix) - -RealNum is the real coefficient of the complex number. - -INum is the imaginary coefficient of the complex number. - -Suffix is a list of options, "i" or "j". -Example - -=COMPLEX(3;4;"j") returns 3+4j. -
-
+COMPLEX + The result is a complex number which is returned from a real coefficient and an imaginary coefficient. + Syntax + COMPLEX(RealNum; INum; Suffix) + + RealNum is the real coefficient of the complex number. + + INum is the imaginary coefficient of the complex number. + + Suffix is a list of options, "i" or "j". + Example + + =COMPLEX(3;4;"j") returns 3+4j. +
+
OCT2BIN function -converting;octal numbers, into binary numbers + converting;octal numbers, into binary numbers mw added one entry -OCT2BIN -The result is the binary number for the octal number entered. -Syntax -OCT2BIN(Number; Places) - -Number is the octal number. The number can have a maximum of 10 places. The most significant bit is the sign bit, the following bits return the value. Negative numbers are entered as two's complement. - -Places is the number of places to be output. -Example - -=OCT2BIN(3;3) returns 011. -
-
+OCT2BIN + The result is the binary number for the octal number entered. + Syntax + OCT2BIN(Number; Places) + + Number is the octal number. The number can have a maximum of 10 places. The most significant bit is the sign bit, the following bits return the value. Negative numbers are entered as two's complement. + + Places is the number of places to be output. + Example + + =OCT2BIN(3;3) returns 011. +
+
OCT2DEC function -converting;octal numbers, into decimal numbers + converting;octal numbers, into decimal numbers mw added one entry -OCT2DEC -The result is the decimal number for the octal number entered. -Syntax -OCT2DEC(Number) - -Number is the octal number. The number can have a maximum of 10 places. The most significant bit is the sign bit, the following bits return the value. Negative numbers are entered as two's complement. -Example - -=OCT2DEC(144) returns 100. -
-
+OCT2DEC + The result is the decimal number for the octal number entered. + Syntax + OCT2DEC(Number) + + Number is the octal number. The number can have a maximum of 10 places. The most significant bit is the sign bit, the following bits return the value. Negative numbers are entered as two's complement. + Example + + =OCT2DEC(144) returns 100. +
+
OCT2HEX function -converting;octal numbers, into hexadecimal numbers + converting;octal numbers, into hexadecimal numbers mw added one entry -OCT2HEX - The result is the hexadecimal number for the octal number entered. -Syntax -OCT2HEX(Number; Places) - -Number is the octal number. The number can have a maximum of 10 places. The most significant bit is the sign bit, the following bits return the value. Negative numbers are entered as two's complement. - -Places is the number of places to be output. -Example - -=OCT2HEX(144;4) returns 0064. -
-
-CONVERT_ADD function +OCT2HEX + The result is the hexadecimal number for the octal number entered. + Syntax + OCT2HEX(Number; Places) + + Number is the octal number. The number can have a maximum of 10 places. The most significant bit is the sign bit, the following bits return the value. Negative numbers are entered as two's complement. + + Places is the number of places to be output. + Example + + =OCT2HEX(144;4) returns 0064. +
+
+CONVERT function -CONVERT_ADD -Converts a value from one unit of measure to the corresponding value in another unit of measure. Enter the units of measures directly as text in quotation marks or as a reference. If you enter the units of measure in cells, they must correspond exactly with the following list which is case sensitive: For example, in order to enter a lower case l (for liter) in a cell, enter the apostrophe ' immediately followed by l. - - - -Property - - -Units - - - - -Weight - - -g, sg, lbm, u, ozm, stone, ton, grain, pweight, hweight, shweight - - - - -Length - - -m, mi, Nmi, in, ft, yd, ang, Pica, ell, parsec - - - - -Time - - -yr, day, hr, mn, sec - - - - -Pressure - - -Pa, atm, mmHg, Torr, psi - - - - -Force - - -N, dyn, pond - - - - -Energy - - -J, e, c, cal, eV, HPh, Wh, BTU - - - - -Power - - -W, HP, PS - - - - -Field strength - - -T, ga - - - - -Temperature - - -C, F, K, Reau, Rank - - - - -Volume - - -l, tsp, tbs, oz, cup, pt, qt, gal, m3, mi3, Nmi3, in3, ft3, yd3, ang3, Pica3, barrel, bushel, regton, Schooner, Middy, Glass - - - - -Area - - -m2, mi2, Nmi2, in2, ft2, yd2, ang2, Pica2, Morgen, ar, acre, ha - - - - -Speed - - -m/s, m/h, mph, kn, admkn - - -
+CONVERTwas CONVERT_ADD before. Now CONVERT was changed to EUROCONVERT, and CONVERT_ADD was changed to CONVERT + Converts a value from one unit of measure to the corresponding value in another unit of measure. Enter the units of measures directly as text in quotation marks or as a reference. If you enter the units of measure in cells, they must correspond exactly with the following list which is case sensitive: For example, in order to enter a lower case l (for liter) in a cell, enter the apostrophe ' immediately followed by l. + + + + Property + + + Units + + + + + Weight + + + g, sg, lbm, u, ozm, stone, ton, grain, pweight, hweight, shweight + + + + + Length + + + m, mi, Nmi, in, ft, yd, ang, Pica, ell, parsec + + + + + Time + + + yr, day, hr, mn, sec + + + + + Pressure + + + Pa, atm, mmHg, Torr, psi + + + + + Force + + + N, dyn, pond + + + + + Energy + + + J, e, c, cal, eV, HPh, Wh, BTU + + + + + Power + + + W, HP, PS + + + + + Field strength + + + T, ga + + + + + Temperature + + + C, F, K, Reau, Rank + + + + + Volume + + + l, tsp, tbs, oz, cup, pt, qt, gal, m3, mi3, Nmi3, in3, ft3, yd3, ang3, Pica3, barrel, bushel, regton, Schooner, Middy, Glass + + + + + Area + + + m2, mi2, Nmi2, in2, ft2, yd2, ang2, Pica2, Morgen, ar, acre, ha + + + + + Speed + + + m/s, m/h, mph, kn, admkn + + +
-Each unit of measure must be preceded by a prefix character from the following list: - - - -Permitted prefix characters - - - - - - -10^(<0) - - -d, c, m, u, n, p, f, a, z, y - - - - -10^(>0) - - -e, h, k, M, G, T, P, E, Z, Y - - -
- -Syntax -CONVERT_ADD(Number; "FromUnit"; "ToUnit") - -Number is the number to be converted. - -FromUnit is the unit from which conversion is taking place. - -ToUnit is the unit to which conversion is taking place. -Examples - -=CONVERT_ADD(10;"HP";"PS") returns, rounded to two decimal places, 10.14. 10 HP equal 10.14 PS. - -=CONVERT_ADD(10;"km";"mi") returns, rounded to two decimal places, 6.21. 10 Kilometers equal 6.21 miles. The k is the permitted prefix character for the factor 10^3. -
-
+ Each unit of measure must be preceded by a prefix character from the following list: + + + + Permitted prefix characters + + + + + + + 10^(<0) + + + d, c, m, u, n, p, f, a, z, y + + + + + 10^(>0) + + + e, h, k, M, G, T, P, E, Z, Y + + +
+ + Syntax + CONVERT(Number; "FromUnit"; "ToUnit") + + Number is the number to be converted. + + FromUnit is the unit from which conversion is taking place. + + ToUnit is the unit to which conversion is taking place. Both units must be of the same type. + Examples + + =CONVERT(10;"HP";"PS") returns, rounded to two decimal places, 10.14. 10 HP equal 10.14 PS. + + =CONVERT(10;"km";"mi") returns, rounded to two decimal places, 6.21. 10 kilometers equal 6.21 miles. The k is the permitted prefix character for the factor 10^3. +
+
FACTDOUBLE function -factorials;numbers with increments of two + factorials;numbers with increments of two mw added one entry -FACTDOUBLE -Returns the double factorial of a number. -Syntax -FACTDOUBLE(Number) -Returns Number -!!, the double factorial of Number, where Number is an integer greater than or equal to zero. -For even numbers FACTDOUBLE(n) returns: -2*4*6*8* ... *n -For odd numbers FACTDOUBLE(n) returns: -1*3*5*7* ... *n -FACTDOUBLE(0) returns 1 by definition. -Example - -=FACTDOUBLE(5) returns 15. - -=FACTDOUBLE(6) returns 48. - -=FACTDOUBLE(0) returns 1.see also FACT, MULTINOMIAL, PRODUCT +FACTDOUBLE + Returns the double factorial of a number. + Syntax + FACTDOUBLE(Number) + Returns Number + !!, the double factorial of Number, where Number is an integer greater than or equal to zero. + For even numbers FACTDOUBLE(n) returns: + 2*4*6*8* ... *n + For odd numbers FACTDOUBLE(n) returns: + 1*3*5*7* ... *n + FACTDOUBLE(0) returns 1 by definition. + Example + + =FACTDOUBLE(5) returns 15. + + =FACTDOUBLE(6) returns 48. + + =FACTDOUBLE(0) returns 1.see also FACT, MULTINOMIAL, PRODUCT
- -
- - + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/01/04060181.xhp b/helpcontent2/source/text/scalc/01/04060181.xhp index ccf07edf3a..500a562f2f 100755 --- a/helpcontent2/source/text/scalc/01/04060181.xhp +++ b/helpcontent2/source/text/scalc/01/04060181.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 04060181.xhp,v $ - * $Revision: 1.9.4.1 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,363 +35,425 @@ - -Statistical Functions Part One -/text/scalc/01/04060181.xhp - - - -Statistical Functions Part One + + Statistical Functions Part One + /text/scalc/01/04060181.xhp + + + + Statistical Functions Part One
INTERCEPT function -points of intersection -intersections + points of intersection + intersections mw added two entries -INTERCEPT -Calculates the point at which a line will intersect the y-values by using known x-values and y-values. -Syntax -INTERCEPT(DataY; DataX) - -DataY is the dependent set of observations or data. - -DataX is the independent set of observations or data. -Names, arrays or references containing numbers must be used here. Numbers can also be entered directly. -Example -To calculate the intercept, use cells D3:D9 as the y value and C3:C9 as the x value from the example spreadsheet. Input will be as follows: - -=INTERCEPT(D3:D9;C3:C9) = 2.15. -
-
+INTERCEPT + Calculates the point at which a line will intersect the y-values by using known x-values and y-values. + Syntax + INTERCEPT(DataY; DataX) + + DataY is the dependent set of observations or data. + + DataX is the independent set of observations or data. + Names, arrays or references containing numbers must be used here. Numbers can also be entered directly. + Example + To calculate the intercept, use cells D3:D9 as the y value and C3:C9 as the x value from the example spreadsheet. Input will be as follows: + + =INTERCEPT(D3:D9;C3:C9) = 2.15. +
+
COUNT function -numbers;counting + numbers;counting mw added one entry -COUNT -Counts how many numbers are in the list of arguments. Text entries are ignored. -Syntax -COUNT(Value1; Value2; ... Value30) - -Value1; Value2, ... are 1 to 30 values or ranges representing the values to be counted. -Example -The entries 2, 4, 6 and eight in the Value 1-4 fields are to be counted. - -=COUNT(2;4;6;"eight") = 3. The count of numbers is therefore 3. -
-
+COUNT + Counts how many numbers are in the list of arguments. Text entries are ignored. + Syntax + COUNT(Value1; Value2; ... Value30) + + Value1; Value2, ... are 1 to 30 values or ranges representing the values to be counted. + Example + The entries 2, 4, 6 and eight in the Value 1-4 fields are to be counted. + + =COUNT(2;4;6;"eight") = 3. The count of numbers is therefore 3. +
+
COUNTA function -number of entries + number of entries mw added one entry -COUNTA -Counts how many values are in the list of arguments. Text entries are also counted, even when they contain an empty string of length 0. If an argument is an array or reference, empty cells within the array or reference are ignored.UFI: fix to #i35888# -Syntax -COUNTA(Value1; Value2; ... Value30) - -Value1; Value2, ... are 1 to 30 arguments representing the values to be counted. -Example -The entries 2, 4, 6 and eight in the Value 1-4 fields are to be counted. - -=COUNTA(2;4;6;"eight") = 4. The count of values is therefore 4. -
-
+COUNTA + Counts how many values are in the list of arguments. Text entries are also counted, even when they contain an empty string of length 0. If an argument is an array or reference, empty cells within the array or reference are ignored.UFI: fix to #i35888# + Syntax + COUNTA(Value1; Value2; ... Value30) + + Value1; Value2, ... are 1 to 30 arguments representing the values to be counted. + Example + The entries 2, 4, 6 and eight in the Value 1-4 fields are to be counted. + + =COUNTA(2;4;6;"eight") = 4. The count of values is therefore 4. +
+
B function -probabilities of samples with binomial distribution + probabilities of samples with binomial distribution mw added one entry -B -Returns the probability of a sample with binomial distribution. -Syntax -B(Trials; SP; T1; T2) - -Trials is the number of independent trials. - -SP is the probability of success on each trial. - -T1 defines the lower limit for the number of trials. - -T2 (optional) defines the upper limit for the number of trials. -Example -What is the probability with ten throws of the dice, that a six will come up exactly twice? The probability of a six (or any other number) is 1/6. The following formula combines these factors: - -=B(10;1/6;2) returns a probability of 29%. -
-
+B + Returns the probability of a sample with binomial distribution. + Syntax + B(Trials; SP; T1; T2) + + Trials is the number of independent trials. + + SP is the probability of success on each trial. + + T1 defines the lower limit for the number of trials. + + T2 (optional) defines the upper limit for the number of trials. + Example + What is the probability with ten throws of the dice, that a six will come up exactly twice? The probability of a six (or any other number) is 1/6. The following formula combines these factors: + + =B(10;1/6;2) returns a probability of 29%. +
+
RSQ function -determination coefficients -regression analysis + determination coefficients + regression analysis mw added regression analysis -RSQ -Returns the square of the Pearson correlation coefficient based on the given values. RSQ (also called determination coefficient) is a measure for the accuracy of an adjustment and can be used to produce a regression analysis. -Syntax -RSQ(DataY; DataX) - -DataY is an array or range of data points. - -DataX is an array or range of data points. -Example - -=RSQ(A1:A20;B1:B20) calculates the correlation coefficient for both data sets in columns A and B. -
-
+RSQ + Returns the square of the Pearson correlation coefficient based on the given values. RSQ (also called determination coefficient) is a measure for the accuracy of an adjustment and can be used to produce a regression analysis. + Syntax + RSQ(DataY; DataX) + + DataY is an array or range of data points. + + DataX is an array or range of data points. + Example + + =RSQ(A1:A20;B1:B20) calculates the determination coefficient for both data sets in columns A and B. +
+
BETAINV function -cumulative probability density function;inverse of + cumulative probability density function;inverse of mw added one entry -BETAINV -Returns the inverse of the cumulative beta probability density function. -Syntax -BETAINV(Number; Alpha; Beta; Start; End) - -Number is the value between Start and End at which to evaluate the function. - -Alpha is a parameter to the distribution. - -Beta is a parameter to the distribution. - -Start (optional) is the lower bound for Number. - -End (optional) is the upper bound for Number. - - - -Example - -=BETAINV(0.5;5;10) returns the value 0.33. -
-
+BETAINV + Returns the inverse of the cumulative beta probability density function. + Syntax + BETAINV(Number; Alpha; Beta; Start; End) + + Number is the value between Start and End at which to evaluate the function. + + Alpha is a parameter to the distribution. + + Beta is a parameter to the distribution. + + Start (optional) is the lower bound for Number. + + End (optional) is the upper bound for Number. + + + + Example + + =BETAINV(0.5;5;10) returns the value 0.33. +
+
BETADIST function -cumulative probability density function;calculating + cumulative probability density function;calculating mw added one entry -BETADIST -Returns the cumulative beta probability density function. -Syntax -BETADIST(Number; Alpha; Beta; Start; End) - -Number is the value between Start and End at which to evaluate the function. - -Alpha is a parameter to the distribution. - -Beta is a parameter to the distribution. - -Start (optional) is the lower bound for Number. - -End (optional) is the upper bound for Number. - - - -Example - -=BETADIST(0.75;3;4) returns the value 0.96 -
-
+BETADIST + Returns the beta function. + Syntax + BETADIST(Number; Alpha; Beta; Start; End; Cumulative) + + Number is the value between Start and End at which to evaluate the function. + + Alpha is a parameter to the distribution. + + Beta is a parameter to the distribution. + + Start (optional) is the lower bound for Number. + + End (optional) is the upper bound for Number. + + Cumulative (optional) can be 0 or False to calculate the probability density function. It can be any other value or True or omitted to calculate the cumulative distribution function. + + + + Example + + =BETADIST(0.75;3;4) returns the value 0.96 +
+
BINOMDIST function -BINOMDIST -Returns the individual term binomial distribution probability. -Syntax -BINOMDIST(X; Trials; SP; C) - -X is the number of successes in a set of trials. - -Trials is the number of independent trials. - -SP is the probability of success on each trial. - -C = 0 calculates the probability of a single event and C = 1 calculates the cumulative probability. -Example - -=BINOMDIST(A1;12;0.5;0) shows (if the values 0 to 12 are entered in A1) the probabilities for 12 flips of a coin that Heads will come up exactly the number of times entered in A1. - -=BINOMDIST(A1;12;0.5;1) shows the cumulative probabilities for the same series. For example, if A1 = 4, the cumulative probability of the series is 0, 1, 2, 3 or 4 times Heads (non-exclusive OR). -
-
+BINOMDIST + Returns the individual term binomial distribution probability. + Syntax + BINOMDIST(X; Trials; SP; C) + + X is the number of successes in a set of trials. + + Trials is the number of independent trials. + + SP is the probability of success on each trial. + + C = 0 calculates the probability of a single event and C = 1 calculates the cumulative probability. + Example + + =BINOMDIST(A1;12;0.5;0) shows (if the values 0 to 12 are entered in A1) the probabilities for 12 flips of a coin that Heads will come up exactly the number of times entered in A1. + + =BINOMDIST(A1;12;0.5;1) shows the cumulative probabilities for the same series. For example, if A1 = 4, the cumulative probability of the series is 0, 1, 2, 3 or 4 times Heads (non-exclusive OR). +
+
+ +CHISQINV function + +CHISQINV + Returns the inverse of CHISQDIST. + Syntax + + Probability is the probability value for which the inverse of the chi-square distribution is to be calculated. + + Degrees Of Freedom is the degrees of freedom for the chi-square function. +
+
CHIINV function -CHIINV -Returns the inverse of the one-tailed probability of the chi-squared distribution. -Syntax -CHIINV(Number; DegreesFreedom) - -Number is the value of the error probability. - -DegreesFreedom is the degrees of freedom of the experiment. -Example -A die is thrown 1020 times. The numbers on the die 1 through 6 come up 195, 151, 148, 189, 183 and 154 times (observation values). The hypothesis that the die is not fixed is to be tested. -The Chi square distribution of the random sample is determined by the formula given above. Since the expected value for a given number on the die for n throws is n times 1/6, thus 1020/6 = 170, the formula returns a Chi square value of 13.27. -If the (observed) Chi square is greater than or equal to the (theoretical) Chi square CHIINV, the hypothesis will be discarded, since the deviation between theory and experiment is too great. If the observed Chi square is less that CHIINV, the hypothesis is confirmed with the indicated probability of error. - -=CHIINV(0.05;5) returns 11.07. - -=CHIINV(0.02;5) returns 13.39. -If the probability of error is 5%, the die is not true. If the probability of error is 2%, there is no reason to believe it is fixed. -
-
+CHIINV + Returns the inverse of the one-tailed probability of the chi-squared distribution. + Syntax + CHIINV(Number; DegreesFreedom) + + Number is the value of the error probability. + + DegreesFreedom is the degrees of freedom of the experiment. + Example + A die is thrown 1020 times. The numbers on the die 1 through 6 come up 195, 151, 148, 189, 183 and 154 times (observation values). The hypothesis that the die is not fixed is to be tested. + The Chi square distribution of the random sample is determined by the formula given above. Since the expected value for a given number on the die for n throws is n times 1/6, thus 1020/6 = 170, the formula returns a Chi square value of 13.27. + If the (observed) Chi square is greater than or equal to the (theoretical) Chi square CHIINV, the hypothesis will be discarded, since the deviation between theory and experiment is too great. If the observed Chi square is less that CHIINV, the hypothesis is confirmed with the indicated probability of error. + + =CHIINV(0.05;5) returns 11.07. + + =CHIINV(0.02;5) returns 13.39. + If the probability of error is 5%, the die is not true. If the probability of error is 2%, there is no reason to believe it is fixed. +
+
CHITEST function -CHITEST -Returns the probability of a deviance from a random distribution of two test series based on the chi-squared test for independence. CHITEST returns the chi-squared distribution of the data. -The probability determined by CHITEST can also be determined with CHIDIST, in which case the Chi square of the random sample must then be passed as a parameter instead of the data row. -Syntax -CHITEST(DataB; DataE) - -DataB is the array of the observations. - -DataE is the range of the expected values. -Example - - - - - -Data_B (observed) - - -Data_E (expected) - - - - -1 - - - -195 - - - - -170 - - - - - -2 - - - -151 - - - - -170 - - - - - -3 - - - -148 - +CHITEST + Returns the probability of a deviance from a random distribution of two test series based on the chi-squared test for independence. CHITEST returns the chi-squared distribution of the data. + The probability determined by CHITEST can also be determined with CHIDIST, in which case the Chi square of the random sample must then be passed as a parameter instead of the data row. + Syntax + CHITEST(DataB; DataE) + + DataB is the array of the observations. + + DataE is the range of the expected values. + Example +
+ + - - -170 - - - - - -4 - - - -189 - - - - -170 - - - - - -5 - - - -183 - - - - -170 - - - - - -6 - - - -154 - - - - -170 - - - -
+ + Data_B (observed) + + + Data_E (expected) + + + + + 1 + + + + 195 + + + + + 170 + + + + + + 2 + + + + 151 + + + + + 170 + + + + + + 3 + + + + 148 + + + + + 170 + + + + + + 4 + + + + 189 + + + + + 170 + + + + + + 5 + + + + 183 + + + + + 170 + + + + + + 6 + + + + 154 + + + + + 170 + + + + - -=CHITEST(A1:A6;B1:B6) equals 0.02. This is the probability which suffices the observed data of the theoretical Chi-square distribution. -
-
+ + =CHITEST(A1:A6;B1:B6) equals 0.02. This is the probability which suffices the observed data of the theoretical Chi-square distribution. +
+
CHIDIST function -CHIDIST -Returns the probability value from the indicated Chi square that a hypothesis is confirmed. CHIDIST compares the Chi square value to be given for a random sample that is calculated from the sum of (observed value-expected value)^2/expected value for all values with the theoretical Chi square distribution and determines from this the probability of error for the hypothesis to be tested. -The probability determined by CHIDIST can also be determined by CHITEST. -Syntax -CHIDIST(Number; DegreesFreedom) - -Number is the chi-square value of the random sample used to determine the error probability. - -DegreesFreedom are the degrees of freedom of the experiment. -Example - -=CHIDIST(13.27; 5) equals 0.02. -If the Chi square value of the random sample is 13.27 and if the experiment has 5 degrees of freedom, then the hypothesis is assured with a probability of error of 2%. -
-
+CHIDIST + Returns the probability value from the indicated Chi square that a hypothesis is confirmed. CHIDIST compares the Chi square value to be given for a random sample that is calculated from the sum of (observed value-expected value)^2/expected value for all values with the theoretical Chi square distribution and determines from this the probability of error for the hypothesis to be tested. + The probability determined by CHIDIST can also be determined by CHITEST. + Syntax + CHIDIST(Number; DegreesFreedom) + + Number is the chi-square value of the random sample used to determine the error probability. + + DegreesFreedom are the degrees of freedom of the experiment. + Example + + =CHIDIST(13.27; 5) equals 0.02. + If the Chi square value of the random sample is 13.27 and if the experiment has 5 degrees of freedom, then the hypothesis is assured with a probability of error of 2%. +
+
+ +CHISQDIST function + +CHISQDIST + Returns the value of the probability density function or the cumulative distribution function for the chi-square distribution. + Syntax + CHISQDIST(Number; Degrees Of Freedom; Cumulative) + + Number is the number for which the function is to be calculated. + + Degrees Of Freedom is the degrees of freedom for the chi-square function. + + Cumulative (optional): 0 or False calculates the probability density function. Other values or True or omitted calculates the cumulative distribution function. +
+
EXPONDIST function -exponential distributions + exponential distributions -EXPONDIST -Returns the exponential distribution. -Syntax -EXPONDIST(Number; Lambda; C) - -Number is the value of the function. - -Lambda is the parameter value.UFI removed a double bookmark - -C is a logical value that determines the form of the function. C = 0 calculates the density function, and C = 1 calculates the distribution. -Example - -=EXPONDIST(3;0.5;1) returns 0.78. -
+EXPONDIST + Returns the exponential distribution. + Syntax + EXPONDIST(Number; Lambda; C) + + Number is the value of the function. + + Lambda is the parameter value.UFI removed a double bookmark + + C is a logical value that determines the form of the function. C = 0 calculates the density function, and C = 1 calculates the distribution. + Example + + =EXPONDIST(3;0.5;1) returns 0.78. +
- -
- - + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/01/04060182.xhp b/helpcontent2/source/text/scalc/01/04060182.xhp index 57aa859d47..2c38afb43d 100755 --- a/helpcontent2/source/text/scalc/01/04060182.xhp +++ b/helpcontent2/source/text/scalc/01/04060182.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 04060182.xhp,v $ - * $Revision: 1.8.4.1 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,257 +35,307 @@ - -Statistical Functions Part Two -/text/scalc/01/04060182.xhp - - - -Statistical Functions Part Two + + Statistical Functions Part Two + /text/scalc/01/04060182.xhp + + + + Statistical Functions Part Two
FINV function -inverse F probability distribution + inverse F probability distribution mw added one entry -FINV -Returns the inverse of the F probability distribution. The F distribution is used for F tests in order to set the relation between two differing data sets. -Syntax -FINV(Number; DegreesFreedom1; DegreesFreedom2) - -Number is probability value for which the inverse F distribution is to be calculated. - -DegreesFreedom1 is the number of degrees of freedom in the numerator of the F distribution. - -DegreesFreedom2 is the number of degrees of freedom in the denominator of the F distribution. -Example - -=FINV(0.5;5;10) yields 0.93. -
-
+FINV + Returns the inverse of the F probability distribution. The F distribution is used for F tests in order to set the relation between two differing data sets. + Syntax + FINV(Number; DegreesFreedom1; DegreesFreedom2) + + Number is probability value for which the inverse F distribution is to be calculated. + + DegreesFreedom1 is the number of degrees of freedom in the numerator of the F distribution. + + DegreesFreedom2 is the number of degrees of freedom in the denominator of the F distribution. + Example + + =FINV(0.5;5;10) yields 0.93. +
+
FISHER function -FISHER -Returns the Fisher transformation for x and creates a function close to a normal distribution. -Syntax -FISHER(Number) - -Number is the value to be transformed. -Example - -=FISHER(0.5) yields 0.55. -
-
+FISHER + Returns the Fisher transformation for x and creates a function close to a normal distribution. + Syntax + FISHER(Number) + + Number is the value to be transformed. + Example + + =FISHER(0.5) yields 0.55. +
+
FISHERINV function -inverse of Fisher transformation + inverse of Fisher transformation mw added one entry -FISHERINV -Returns the inverse of the Fisher transformation for x and creates a function close to a normal distribution. -Syntax -FISHERINV(Number) - -Number is the value that is to undergo reverse-transformation. -Example - -=FISHERINV(0.5) yields 0.46. -
-
+FISHERINV + Returns the inverse of the Fisher transformation for x and creates a function close to a normal distribution. + Syntax + FISHERINV(Number) + + Number is the value that is to undergo reverse-transformation. + Example + + =FISHERINV(0.5) yields 0.46. +
+
FTEST function -FTEST -Returns the result of an F test. -Syntax -FTEST(Data1; Data2) - -Data1 is the first record array. - -Data2 is the second record array. -Example - -=FTEST(A1:A30;B1:B12) calculates whether the two data sets are different in their variance and returns the probability that both sets could have come from the same total population. -
-
+FTEST + Returns the result of an F test. + Syntax + FTEST(Data1; Data2) + + Data1 is the first record array. + + Data2 is the second record array. + Example + + =FTEST(A1:A30;B1:B12) calculates whether the two data sets are different in their variance and returns the probability that both sets could have come from the same total population. +
+
FDIST function -FDIST -Calculates the values of an F distribution. -Syntax -FDIST(Number; DegreesFreedom1; DegreesFreedom2) - -Number is the value for which the F distribution is to be calculated. - -degreesFreedom1 is the degrees of freedom in the numerator in the F distribution. - -degreesFreedom2 is the degrees of freedom in the denominator in the F distribution. -Example - -=FDIST(0.8;8;12) yields 0.61. -
-
+FDIST + Calculates the values of an F distribution. + Syntax + FDIST(Number; DegreesFreedom1; DegreesFreedom2) + + Number is the value for which the F distribution is to be calculated. + + degreesFreedom1 is the degrees of freedom in the numerator in the F distribution. + + degreesFreedom2 is the degrees of freedom in the denominator in the F distribution. + Example + + =FDIST(0.8;8;12) yields 0.61. +
+
+ +GAMMA function + +GAMMA + Returns the Gamma function value. Note that GAMMAINV is not the inverse of GAMMA, but of GAMMADIST. + Syntax + + Number is the number for which the Gamma function value is to be calculated. +
+
GAMMAINV function -GAMMAINV -Returns the inverse of the Gamma cumulative distribution. This function allows you to search for variables with different distribution. -Syntax -GAMMAINV(Number; Alpha; Beta) - -Number is the probability value for which the inverse Gamma distribution is to be calculated. - -Alpha is the parameter Alpha of the Gamma distribution. - -Beta is the parameter Beta of the Gamma distribution. -Example - -=GAMMAINV(0.8;1;1) yields 1.61. -
-
+GAMMAINV + Returns the inverse of the Gamma cumulative distribution GAMMADIST. This function allows you to search for variables with different distribution. + Syntax + GAMMAINV(Number; Alpha; Beta) + + Number is the probability value for which the inverse Gamma distribution is to be calculated. + + Alpha is the parameter Alpha of the Gamma distribution. + + Beta is the parameter Beta of the Gamma distribution. + Example + + =GAMMAINV(0.8;1;1) yields 1.61. +
+
GAMMALN function -natural logarithm of Gamma function + natural logarithm of Gamma function mw added one entry -GAMMALN -Returns the natural logarithm of the Gamma function: G(x). -Syntax -GAMMALN(Number) - -Number is the value for which the natural logarithm of the Gamma function is to be calculated. -Example - -=GAMMALN(2) yields 0. -
-
+GAMMALN + Returns the natural logarithm of the Gamma function: G(x). + Syntax + GAMMALN(Number) + + Number is the value for which the natural logarithm of the Gamma function is to be calculated. + Example + + =GAMMALN(2) yields 0. +
+
GAMMADIST function -GAMMADIST -Returns the values of a Gamma distribution. -Syntax -GAMMADIST(Number; Alpha; Beta; C) - -Number is the value for which the Gamma distribution is to be calculated. - -Alpha is the parameter Alpha of the Gamma distribution. - -Beta is the parameter Beta of the Gamma distribution - -C = 0 calculates the density function C = 1 the distribution. -Example - -=GAMMADIST(2;1;1;1) yields 0.86. -
-
+GAMMADIST + Returns the values of a Gamma distribution. + The inverse function is GAMMAINV. + Syntax + GAMMADIST(Number; Alpha; Beta; C) + + Number is the value for which the Gamma distribution is to be calculated. + + Alpha is the parameter Alpha of the Gamma distribution. + + Beta is the parameter Beta of the Gamma distribution + + C (optional) = 0 or False calculates the density function C = 1 or True calculates the distribution. + Example + + =GAMMADIST(2;1;1;1) yields 0.86. +
+
GAUSS function -normal distribution; standard + normal distribution; standard mw added one entry -GAUSS -Returns the standard normal cumulative distribution. -It is GAUSS(x)=NORMSDIST(x)-0.5 -Syntax -GAUSS(Number) - -Number is the value for which the value of the standard normal distribution is to be calculated. -Example - -=GAUSS(0.19) = 0.08 - -=GAUSS(0.0375) = 0.01 -
-
+GAUSS + Returns the standard normal cumulative distribution. + It is GAUSS(x)=NORMSDIST(x)-0.5 + Syntax + GAUSS(Number) + + Number is the value for which the value of the standard normal distribution is to be calculated. + Example + + =GAUSS(0.19) = 0.08 + + =GAUSS(0.0375) = 0.01 +
+
GEOMEAN function -means;geometric + means;geometric mw added one entry -GEOMEAN -Returns the geometric mean of a sample. -Syntax -GEOMEAN(Number1; Number2; ...Number30) - -Number1, Number2,...Number30 are numeric arguments or ranges that represent a random sample. -Example - -=GEOMEAN(23;46;69) = 41.79. The geometric mean value of this random sample is therefore 41.79. -
-
+GEOMEAN + Returns the geometric mean of a sample. + Syntax + GEOMEAN(Number1; Number2; ...Number30) + + Number1, Number2,...Number30 are numeric arguments or ranges that represent a random sample. + Example + + =GEOMEAN(23;46;69) = 41.79. The geometric mean value of this random sample is therefore 41.79. +
+
TRIMMEAN function -means;of data set without margin data + means;of data set without margin data mw added one entry -TRIMMEAN -Returns the mean of a data set without the Alpha percent of data at the margins. -Syntax -TRIMMEAN(Data; Alpha) - -Data is the array of data in the sample. - -Alpha is the percentage of the marginal data that will not be taken into consideration. -Example - -=TRIMMEAN(A1:A50; 0.1) calculates the mean value of numbers in A1:A50, without taking into consideration the 5 percent of the values representing the highest values and the 5 percent of the values representing the lowest ones. The percentage numbers refer to the amount of the untrimmed mean value, not to the number of summands. -
-
+TRIMMEAN + Returns the mean of a data set without the Alpha percent of data at the margins. + Syntax + TRIMMEAN(Data; Alpha) + + Data is the array of data in the sample. + + Alpha is the percentage of the marginal data that will not be taken into consideration. + Example + + =TRIMMEAN(A1:A50; 0.1) calculates the mean value of numbers in A1:A50, without taking into consideration the 5 percent of the values representing the highest values and the 5 percent of the values representing the lowest ones. The percentage numbers refer to the amount of the untrimmed mean value, not to the number of summands. +
+
ZTEST function -ZTEST -Returns the two-tailed P value of a z test with standard distribution. -Syntax -ZTEST(Data; Number; Sigma) - -Data is the array of the data. - -Number is the value to be tested. - -Sigma (optional) is the standard deviation of the total population. If this argument is missing, the standard deviation of the sample in question will be processed. -Example - -=ZTEST(A1:A50;12) yields the probability that value 12 belongs to the standard distribution of the total population of data in A1:A50. -
-
+ZTEST + Returns the two-tailed P value of a z test with standard distribution. + Syntax + ZTEST(Data; Number; Sigma) + + Data is the array of the data. + + Number is the value to be tested. + + Sigma (optional) is the standard deviation of the total population. If this argument is missing, the standard deviation of the sample in question will be processed. + Example + + =ZTEST(A1:A50;12) yields the probability that value 12 belongs to the standard distribution of the total population of data in A1:A50. +
+
HARMEAN function -means;harmonic + means;harmonic mw added one entry -HARMEAN -Returns the harmonic mean of a data set. -Syntax -HARMEAN(Number1; Number2; ...Number30) - -Number1,Number2,...Number30 are up to 30 values or ranges, that can be used to calculate the harmonic mean. -Example - -=HARMEAN(23;46;69) = 37.64. The harmonic mean of this random sample is thus 37.64 -
-
+HARMEAN + Returns the harmonic mean of a data set. + Syntax + HARMEAN(Number1; Number2; ...Number30) + + Number1,Number2,...Number30 are up to 30 values or ranges, that can be used to calculate the harmonic mean. + Example + + =HARMEAN(23;46;69) = 37.64. The harmonic mean of this random sample is thus 37.64 +
+
HYPGEOMDIST function -sampling without replacement + sampling without replacement mw added one entry -HYPGEOMDIST -Returns the hypergeometric distribution. -Syntax -HYPGEOMDIST(X; NSample; Successes; NPopulation) - -X is the number of results achieved in the random sample. - -NSample is the size of the random sample. - -Successes is the number of possible results in the total population. - -NPopulation is the size of the total population. -Example - -=HYPGEOMDIST(2;2;90;100) yields 0.81. If 90 out of 100 pieces of buttered toast fall from the table and hit the floor with the buttered side first, then if 2 pieces of buttered toast are dropped from the table, the probability is 81%, that both will strike buttered side first. -
+HYPGEOMDIST + Returns the hypergeometric distribution. + Syntax + HYPGEOMDIST(X; NSample; Successes; NPopulation) + + X is the number of results achieved in the random sample. + + NSample is the size of the random sample. + + Successes is the number of possible results in the total population. + + NPopulation is the size of the total population. + Example + + =HYPGEOMDIST(2;2;90;100) yields 0.81. If 90 out of 100 pieces of buttered toast fall from the table and hit the floor with the buttered side first, then if 2 pieces of buttered toast are dropped from the table, the probability is 81%, that both will strike buttered side first. +
- -
- - + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/01/04060184.xhp b/helpcontent2/source/text/scalc/01/04060184.xhp index fb3aa2fb43..0e87ee5329 100755 --- a/helpcontent2/source/text/scalc/01/04060184.xhp +++ b/helpcontent2/source/text/scalc/01/04060184.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 04060184.xhp,v $ - * $Revision: 1.14.4.1 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,321 +35,371 @@ - -Statistical Functions Part Four -/text/scalc/01/04060184.xhp - - - -Statistical Functions Part Four + + Statistical Functions Part Four + /text/scalc/01/04060184.xhp + + + + Statistical Functions Part Four
MAX function -MAX -Returns the maximum value in a list of arguments. -Returns 0 if no numeric value and no error was encountered in the cell range(s) passed as cell reference(s). Text cells are ignored by MIN() and MAX(). The functions MINA() and MAXA() return 0 if no value (numeric or text) and no error was encountered. Passing a literal string argument to MIN() or MAX(), e.g. MIN("string"), still results in an error. -Syntax -MAX(Number1; Number2; ...Number30) - -Number1; Number2;...Number30 are numerical values or ranges. -Example - -=MAX(A1;A2;A3;50;100;200) returns the largest value from the list. - -=MAX(A1:B100) returns the largest value from the list. -
-
+MAX + Returns the maximum value in a list of arguments. + Returns 0 if no numeric value and no error was encountered in the cell range(s) passed as cell reference(s). Text cells are ignored by MIN() and MAX(). The functions MINA() and MAXA() return 0 if no value (numeric or text) and no error was encountered. Passing a literal string argument to MIN() or MAX(), e.g. MIN("string"), still results in an error. + Syntax + MAX(Number1; Number2; ...Number30) + + Number1; Number2;...Number30 are numerical values or ranges. + Example + + =MAX(A1;A2;A3;50;100;200) returns the largest value from the list. + + =MAX(A1:B100) returns the largest value from the list. +
+
MAXA function -MAXA -Returns the maximum value in a list of arguments. In opposite to MAX, here you can enter text. The value of the text is 0. -The functions MINA() and MAXA() return 0 if no value (numeric or text) and no error was encountered. -Syntax -MAXA(Value1; Value2; ... Value30) - -Value1; Value2;...Value30 are values or ranges. Text has the value of 0. -Example - -=MAXA(A1;A2;A3;50;100;200;"Text") returns the largest value from the list. - -=MAXA(A1:B100) returns the largest value from the list. -
-
+MAXA + Returns the maximum value in a list of arguments. In opposite to MAX, here you can enter text. The value of the text is 0. + The functions MINA() and MAXA() return 0 if no value (numeric or text) and no error was encountered. + Syntax + MAXA(Value1; Value2; ... Value30) + + Value1; Value2;...Value30 are values or ranges. Text has the value of 0. + Example + + =MAXA(A1;A2;A3;50;100;200;"Text") returns the largest value from the list. + + =MAXA(A1:B100) returns the largest value from the list. +
+
MEDIAN function -MEDIAN -Returns the median of a set of numbers. In a set containing an uneven number of values, the median will be the number in the middle of the set and in a set containing an even number of values, it will be the mean of the two values in the middle of the set. -Syntax -MEDIAN(Number1; Number2; ...Number30) - -Number1; Number2;...Number30 are values or ranges, which represent a sample. Each number can also be replaced by a reference. -Example -for an odd number: =MEDIAN(1;5;9;20;21) returns 9 as the median value. -for an even number: =MEDIAN(1;5;9;20) returns the average of the two middle values 5 and 9, thus 7. -
-
+MEDIAN + Returns the median of a set of numbers. In a set containing an uneven number of values, the median will be the number in the middle of the set and in a set containing an even number of values, it will be the mean of the two values in the middle of the set. + Syntax + MEDIAN(Number1; Number2; ...Number30) + + Number1; Number2;...Number30 are values or ranges, which represent a sample. Each number can also be replaced by a reference. + Example + for an odd number: =MEDIAN(1;5;9;20;21) returns 9 as the median value. + for an even number: =MEDIAN(1;5;9;20) returns the average of the two middle values 5 and 9, thus 7. +
+
MIN function -MIN -Returns the minimum value in a list of arguments. -Returns 0 if no numeric value and no error was encountered in the cell range(s) passed as cell reference(s). Text cells are ignored by MIN() and MAX(). The functions MINA() and MAXA() return 0 if no value (numeric or text) and no error was encountered. Passing a literal string argument to MIN() or MAX(), e.g. MIN("string"), still results in an error. -Syntax -MIN(Number1; Number2; ...Number30) - -Number1; Number2;...Number30 are numerical values or ranges. -Example - -=MIN(A1:B100) returns the smallest value in the list. -
-
+MIN + Returns the minimum value in a list of arguments. + Returns 0 if no numeric value and no error was encountered in the cell range(s) passed as cell reference(s). Text cells are ignored by MIN() and MAX(). The functions MINA() and MAXA() return 0 if no value (numeric or text) and no error was encountered. Passing a literal string argument to MIN() or MAX(), e.g. MIN("string"), still results in an error. + Syntax + MIN(Number1; Number2; ...Number30) + + Number1; Number2;...Number30 are numerical values or ranges. + Example + + =MIN(A1:B100) returns the smallest value in the list. +
+
MINA function -MINA -Returns the minimum value in a list of arguments. Here you can also enter text. The value of the text is 0. -The functions MINA() and MAXA() return 0 if no value (numeric or text) and no error was encountered. -Syntax -MINA(Value1; Value2; ... Value30) - -Value1; Value2;...Value30 are values or ranges. Text has the value of 0. -Example - -=MINA(1;"Text";20) returns 0. - -=MINA(A1:B100) returns the smallest value in the list. -
-
+MINA + Returns the minimum value in a list of arguments. Here you can also enter text. The value of the text is 0. + The functions MINA() and MAXA() return 0 if no value (numeric or text) and no error was encountered. + Syntax + MINA(Value1; Value2; ... Value30) + + Value1; Value2;...Value30 are values or ranges. Text has the value of 0. + Example + + =MINA(1;"Text";20) returns 0. + + =MINA(A1:B100) returns the smallest value in the list. +
+
AVEDEV function -averages;statistical functions + averages;statistical functions mw added "averages;" -AVEDEV -Returns the average of the absolute deviations of data points from their mean. Displays the diffusion in a data set. -Syntax -AVEDEV(Number1; Number2; ...Number30) - -Number1, Number2,...Number 0 are values or ranges that represent a sample. Each number can also be replaced by a reference. -Example - -=AVEDEV(A1:A50) - -
-
+AVEDEV + Returns the average of the absolute deviations of data points from their mean. Displays the diffusion in a data set. + Syntax + AVEDEV(Number1; Number2; ...Number30) + + Number1, Number2,...Number 0 are values or ranges that represent a sample. Each number can also be replaced by a reference. + Example + + =AVEDEV(A1:A50) + +
+
AVERAGE function -AVERAGE -Returns the average of the arguments. -Syntax -AVERAGE(Number1; Number2; ...Number30) - -Number1; Number2;...Number 0 are numerical values or ranges. -Example - -=AVERAGE(A1:A50) - -
-
+AVERAGE + Returns the average of the arguments. + Syntax + AVERAGE(Number1; Number2; ...Number30) + + Number1; Number2;...Number 0 are numerical values or ranges. + Example + + =AVERAGE(A1:A50) + +
+
AVERAGEA function -AVERAGEA -Returns the average of the arguments. The value of a text is 0. -Syntax -AVERAGEA(Value1; Value2; ... Value30) - -Value1; Value2;...Value30 are values or ranges. Text has the value of 0. -Example - -=AVERAGEA(A1:A50) - -
-
+AVERAGEA + Returns the average of the arguments. The value of a text is 0. + Syntax + AVERAGEA(Value1; Value2; ... Value30) + + Value1; Value2;...Value30 are values or ranges. Text has the value of 0. + Example + + =AVERAGEA(A1:A50) + +
+
MODE function -most common value + most common value mw added one entry -MODE -Returns the most common value in a data set. If there are several values with the same frequency, it returns the smallest value. An error occurs when a value doesn't appear twice. -Syntax -MODE(Number1; Number2; ...Number30) - -Number1; Number2;...Number30 are numerical values or ranges. -Example - -=MODE(A1:A50) - -
-
+MODE + Returns the most common value in a data set. If there are several values with the same frequency, it returns the smallest value. An error occurs when a value doesn't appear twice. + Syntax + MODE(Number1; Number2; ...Number30) + + Number1; Number2;...Number30 are numerical values or ranges. + Example + + =MODE(A1:A50) + +
+
NEGBINOMDIST function -negative binomial distribution + negative binomial distribution mw added one entry -NEGBINOMDIST -Returns the negative binomial distribution. -Syntax -NEGBINOMDIST(X; R; SP) - -X represents the value returned for unsuccessful tests. - -R represents the value returned for successful tests. - -SP is the probability of the success of an attempt. -Example - -=NEGBINOMDIST(1;1;0.5) returns 0.25. -
-
+NEGBINOMDIST + Returns the negative binomial distribution. + Syntax + NEGBINOMDIST(X; R; SP) + + X represents the value returned for unsuccessful tests. + + R represents the value returned for successful tests. + + SP is the probability of the success of an attempt. + Example + + =NEGBINOMDIST(1;1;0.5) returns 0.25. +
+
NORMINV function -normal distribution;inverse of + normal distribution;inverse of mw added one entry -NORMINV -Returns the inverse of the normal cumulative distribution. -Syntax -NORMINV(Number; Mean; StDev) - -Number represents the probability value used to determine the inverse normal distribution. - -Mean represents the mean value in the normal distribution. - -StDev represents the standard deviation of the normal distribution. -Example - -=NORMINV(0.9;63;5) returns 69.41. If the average egg weighs 63 grams with a standard deviation of 5, then there will be 90% probability that the egg will not be heavier than 69.41g grams. -
-
+NORMINV + Returns the inverse of the normal cumulative distribution. + Syntax + NORMINV(Number; Mean; StDev) + + Number represents the probability value used to determine the inverse normal distribution. + + Mean represents the mean value in the normal distribution. + + StDev represents the standard deviation of the normal distribution. + Example + + =NORMINV(0.9;63;5) returns 69.41. If the average egg weighs 63 grams with a standard deviation of 5, then there will be 90% probability that the egg will not be heavier than 69.41g grams. +
+
NORMDIST function -density function + density function mw added one entry -NORMDIST -Returns the density function or the normal cumulative distribution. -Syntax -NORMDIST(Number; Mean; StDev; C) - -Number is the value of the distribution based on which the normal distribution is to be calculated. - -Mean is the mean value of the distribution. - -StDev is the standard deviation of the distribution. - -C = 0 calculates the density function; C = 1 calculates the distribution. -Example - -=NORMDIST(70;63;5;0) returns 0.03. - -=NORMDIST(70;63;5;1) returns 0.92. -
-
+NORMDIST + Returns the density function or the normal cumulative distribution. + Syntax + NORMDIST(Number; Mean; StDev; C) + + Number is the value of the distribution based on which the normal distribution is to be calculated. + + Mean is the mean value of the distribution. + + StDev is the standard deviation of the distribution. + + C = 0 calculates the density function; C = 1 calculates the distribution. + Example + + =NORMDIST(70;63;5;0) returns 0.03. + + =NORMDIST(70;63;5;1) returns 0.92. +
+
PEARSON function -PEARSON -Returns the Pearson product moment correlation coefficient r. -Syntax -PEARSON(Data1; Data2) - -Data1 represents the array of the first data set. - -Data2 represents the array of the second data set. -Example - -=PEARSON(A1:A30;B1:B30) returns the Pearson correlation coefficient of both data sets. -
-
+PEARSON + Returns the Pearson product moment correlation coefficient r. + Syntax + PEARSON(Data1; Data2) + + Data1 represents the array of the first data set. + + Data2 represents the array of the second data set. + Example + + =PEARSON(A1:A30;B1:B30) returns the Pearson correlation coefficient of both data sets. +
+
PHI function -PHI -Returns the values of the distribution function for a standard normal distribution. -Syntax -PHI(Number) - -Number represents the value based on which the standard normal distribution is calculated. -Example - -=PHI(2.25) = 0.03 - -=PHI(-2.25) = 0.03 - -=PHI(0) = 0.4 -
-
+PHI + Returns the values of the distribution function for a standard normal distribution. + Syntax + PHI(Number) + + Number represents the value based on which the standard normal distribution is calculated. + Example + + =PHI(2.25) = 0.03 + + =PHI(-2.25) = 0.03 + + =PHI(0) = 0.4 +
+
POISSON function -POISSON -Returns the Poisson distribution. -Syntax -POISSON(Number; Mean; C) - -Number represents the value based on which the Poisson distribution is calculated. - -Mean represents the middle value of the Poisson distribution. - -C = 0 calculates the density function; C = 1 calculates the distribution. -Example - -=POISSON(60;50;1) returns 0.93. -
-
+POISSON + Returns the Poisson distribution. + Syntax + POISSON(Number; Mean; C) + + Number represents the value based on which the Poisson distribution is calculated. + + Mean represents the middle value of the Poisson distribution. + + C (optional) = 0 or False calculates the density function; C = 1 or True calculates the distribution. When omitted, the default value True is inserted when you save the document, for best compatibility with other programs and older versions of %PRODUCTNAME. + Example + + =POISSON(60;50;1) returns 0.93. +
+
PERCENTILE function -PERCENTILE -Returns the alpha-percentile of data values in an array. A percentile returns the scale value for a data series which goes from the smallest (Alpha=0) to the largest value (alpha=1) of a data series. For Alpha = 25%, the percentile means the first quartile; Alpha = 50% is the MEDIAN. -Syntax -PERCENTILE(Data; Alpha) - -Data represents the array of data. - -Alpha represents the percentage of the scale between 0 and 1. -Example - -=PERCENTILE(A1:A50;0.1) represents the value in the data set, which equals 10% of the total data scale in A1:A50. -
-
+PERCENTILE + Returns the alpha-percentile of data values in an array. A percentile returns the scale value for a data series which goes from the smallest (Alpha=0) to the largest value (alpha=1) of a data series. For Alpha = 25%, the percentile means the first quartile; Alpha = 50% is the MEDIAN. + Syntax + PERCENTILE(Data; Alpha) + + Data represents the array of data. + + Alpha represents the percentage of the scale between 0 and 1. + Example + + =PERCENTILE(A1:A50;0.1) represents the value in the data set, which equals 10% of the total data scale in A1:A50. +
+
PERCENTRANK function -PERCENTRANK -Returns the percentage rank of a value in a sample. -Syntax -PERCENTRANK(Data; Value) - -Data represents the array of data in the sample. - -Value represents the value whose percentile rank must be determined. -Example - -=PERCENTRANK(A1:A50;50) returns the percentage rank of the value 50 from the total range of all values found in A1:A50. If 50 falls outside the total range, an error message will appear. -
-
+PERCENTRANK + Returns the percentage rank of a value in a sample. + Syntax + PERCENTRANK(Data; Value) + + Data represents the array of data in the sample. + + Value represents the value whose percentile rank must be determined. + Example + + =PERCENTRANK(A1:A50;50) returns the percentage rank of the value 50 from the total range of all values found in A1:A50. If 50 falls outside the total range, an error message will appear. +
+
QUARTILE function -QUARTILE -Returns the quartile of a data set. -Syntax -QUARTILE(Data; Type) - -Data represents the array of data in the sample. - -Type represents the type of quartile. (0 = MIN, 1 = 25%, 2 = 50% (MEDIAN), 3 = 75% and 4 = MAX.) -Example - -=QUARTILE(A1:A50;2) returns the value of which 50% of the scale corresponds to the lowest to highest values in the range A1:A50. -
+QUARTILE + Returns the quartile of a data set. + Syntax + QUARTILE(Data; Type) + + Data represents the array of data in the sample. + + Type represents the type of quartile. (0 = MIN, 1 = 25%, 2 = 50% (MEDIAN), 3 = 75% and 4 = MAX.) + Example + + =QUARTILE(A1:A50;2) returns the value of which 50% of the scale corresponds to the lowest to highest values in the range A1:A50. +
- -
- - + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/01/04060185.xhp b/helpcontent2/source/text/scalc/01/04060185.xhp index a01c0d71de..16a579e51d 100755 --- a/helpcontent2/source/text/scalc/01/04060185.xhp +++ b/helpcontent2/source/text/scalc/01/04060185.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 04060185.xhp,v $ - * $Revision: 1.14.4.1 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,427 +35,500 @@ - -Statistical Functions Part Five -/text/scalc/01/04060185.xhp - - - -Statistical Functions Part Five + + Statistical Functions Part Five + /text/scalc/01/04060185.xhp + + + + Statistical Functions Part Five
RANK function -numbers;determining ranks + numbers;determining ranks -RANK -Returns the rank of a number in a sample. -Syntax -RANK(Value; Data; Type) - -Value is the value, whose rank is to be determined. - -Data is the array or range of data in the sample. - -Type (optional) is the sequence order. -Type = 0 means descending from the last item of the array to the first (this is the default), -Type = 1 means ascending from the first item of the range to the last. -Example - -=RANK(A10;A1:A50) returns the ranking of the value in A10 in value range A1:A50. If Value does not exist within the range an error message is displayed. -
-
+RANK + Returns the rank of a number in a sample. + Syntax + RANK(Value; Data; Type) + + Value is the value, whose rank is to be determined. + + Data is the array or range of data in the sample. + + Type (optional) is the sequence order. + Type = 0 means descending from the last item of the array to the first (this is the default), + Type = 1 means ascending from the first item of the range to the last. + Example + + =RANK(A10;A1:A50) returns the ranking of the value in A10 in value range A1:A50. If Value does not exist within the range an error message is displayed. +
+
SKEW function -SKEW -Returns the skewness of a distribution. -Syntax -SKEW(Number1; Number2; ...Number30) - -Number1, Number2...Number30 are numerical values or ranges. -Example - -=SKEW(A1:A50) calculates the value of skew for the data referenced. -
-
+SKEW + Returns the skewness of a distribution. + Syntax + SKEW(Number1; Number2; ...Number30) + + Number1, Number2...Number30 are numerical values or ranges. + Example + + =SKEW(A1:A50) calculates the value of skew for the data referenced. +
+
regression lines;FORECAST function -extrapolations -FORECAST function + extrapolations + FORECAST function mw made "regression lines" a two level entry -FORECAST -Extrapolates future values based on existing x and y values. -Syntax -FORECAST(Value; DataY; DataX) - -Value is the x value, for which the y value on the linear regression is to be returned. - -DataY is the array or range of known y's. - -DataX is the array or range of known x's. -Example - -=FORECAST(50;A1:A50;B1;B50) returns the Y value expected for the X value of 50 if the X and Y values in both references are linked by a linear trend. -
-
+FORECAST + Extrapolates future values based on existing x and y values. + Syntax + FORECAST(Value; DataY; DataX) + + Value is the x value, for which the y value on the linear regression is to be returned. + + DataY is the array or range of known y's. + + DataX is the array or range of known x's. + Example + + =FORECAST(50;A1:A50;B1;B50) returns the Y value expected for the X value of 50 if the X and Y values in both references are linked by a linear trend. +
+
STDEV function -standard deviations in statistics;based on a sample + standard deviations in statistics;based on a sample -STDEV -Estimates the standard deviation based on a sample. -Syntax -STDEV(Number1; Number2; ...Number30) - -Number1, Number2, ... Number30 are numerical values or ranges representing a sample based on an entire population. -Example - -=STDEV(A1:A50) returns the estimated standard deviation based on the data referenced. -
-
+STDEV + Estimates the standard deviation based on a sample. + Syntax + STDEV(Number1; Number2; ...Number30) + + Number1, Number2, ... Number30 are numerical values or ranges representing a sample based on an entire population. + Example + + =STDEV(A1:A50) returns the estimated standard deviation based on the data referenced. +
+
STDEVA function -STDEVA -Calculates the standard deviation of an estimation based on a sample. -Syntax -STDEVA(Value1;Value2;...Value30) - -Value1, Value2, ...Value30 are values or ranges representing a sample derived from an entire population. Text has the value 0. -Example - -=STDEVA(A1:A50) returns the estimated standard deviation based on the data referenced. -
-
+STDEVA + Calculates the standard deviation of an estimation based on a sample. + Syntax + STDEVA(Value1;Value2;...Value30) + + Value1, Value2, ...Value30 are values or ranges representing a sample derived from an entire population. Text has the value 0. + Example + + =STDEVA(A1:A50) returns the estimated standard deviation based on the data referenced. +
+
STDEVP function -standard deviations in statistics;based on a population + standard deviations in statistics;based on a population -STDEVP -Calculates the standard deviation based on the entire population. -Syntax -STDEVP(Number1;Number2;...Number30) - -Number 1,Number 2,...Number 30 are numerical values or ranges representing a sample based on an entire population. -Example - -=STDEVP(A1:A50) returns a standard deviation of the data referenced. -
-
+STDEVP + Calculates the standard deviation based on the entire population. + Syntax + STDEVP(Number1;Number2;...Number30) + + Number 1,Number 2,...Number 30 are numerical values or ranges representing a sample based on an entire population. + Example + + =STDEVP(A1:A50) returns a standard deviation of the data referenced. +
+
STDEVPA function -STDEVPA -Calculates the standard deviation based on the entire population. -Syntax -STDEVPA(Value1;Value2;...Value30) - -Value1,value2,...value30 are values or ranges representing a sample derived from an entire population. Text has the value 0. -Example - -=STDEVPA(A1:A50) returns the standard deviation of the data referenced. -
-
+STDEVPA + Calculates the standard deviation based on the entire population. + Syntax + STDEVPA(Value1;Value2;...Value30) + + Value1,value2,...value30 are values or ranges representing a sample derived from an entire population. Text has the value 0. + Example + + =STDEVPA(A1:A50) returns the standard deviation of the data referenced. +
+
STANDARDIZE function -converting;random variables, into normalized values + converting;random variables, into normalized values -STANDARDIZE -Converts a random variable to a normalized value. -Syntax -STANDARDIZE(Number; Mean; StDev) - -Number is the value to be standardized. - -Mean is the arithmetic mean of the distribution. - -StDev is the standard deviation of the distribution. -Example - -=STANDARDIZE(11;10;1) returns 1. The value 11 in a normal distribution with a mean of 10 and a standard deviation of 1 is as much above the mean of 10, as the value 1 is above the mean of the standard normal distribution. -
-
+STANDARDIZE + Converts a random variable to a normalized value. + Syntax + STANDARDIZE(Number; Mean; StDev) + + Number is the value to be standardized. + + Mean is the arithmetic mean of the distribution. + + StDev is the standard deviation of the distribution. + Example + + =STANDARDIZE(11;10;1) returns 1. The value 11 in a normal distribution with a mean of 10 and a standard deviation of 1 is as much above the mean of 10, as the value 1 is above the mean of the standard normal distribution. +
+
NORMSINV function -normal distribution;inverse of standard + normal distribution;inverse of standard -NORMSINV -Returns the inverse of the standard normal cumulative distribution. -Syntax -NORMINV(Number) - -Number is the probability to which the inverse standard normal distribution is calculated. -Example - -=NORMSINV(0.908789) returns 1.3333. -
-
+NORMSINV + Returns the inverse of the standard normal cumulative distribution. + Syntax + NORMINV(Number) + + Number is the probability to which the inverse standard normal distribution is calculated. + Example + + =NORMSINV(0.908789) returns 1.3333. +
+
NORMSDIST function -normal distribution;statistics + normal distribution;statistics -NORMSDIST -Returns the standard normal cumulative distribution function. The distribution has a mean of zero and a standard deviation of one. -It is GAUSS(x)=NORMSDIST(x)-0.5 -Syntax -NORMSDIST(Number) - -Number is the value to which the standard normal cumulative distribution is calculated. -Example - -=NORMSDIST(1) returns 0.84. The area below the standard normal distribution curve to the left of X value 1 is 84% of the total area. -
-
+NORMSDIST + Returns the standard normal cumulative distribution function. The distribution has a mean of zero and a standard deviation of one. + It is GAUSS(x)=NORMSDIST(x)-0.5 + Syntax + NORMSDIST(Number) + + Number is the value to which the standard normal cumulative distribution is calculated. + Example + + =NORMSDIST(1) returns 0.84. The area below the standard normal distribution curve to the left of X value 1 is 84% of the total area. +
+
SLOPE function -SLOPE -Returns the slope of the linear regression line. The slope is adapted to the data points set in the y and x values. -Syntax -SLOPE(DataY; DataX) - -DataY is the array or matrix of Y data. - -DataX is the array or matrix of X data. -Example - -=SLOPE(A1:A50;B1:B50) - -
-
+SLOPE + Returns the slope of the linear regression line. The slope is adapted to the data points set in the y and x values. + Syntax + SLOPE(DataY; DataX) + + DataY is the array or matrix of Y data. + + DataX is the array or matrix of X data. + Example + + =SLOPE(A1:A50;B1:B50) + +
+
STEYX function -standard errors;statistical functions + standard errors;statistical functions mw changed "standard errors" -STEYX -Returns the standard error of the predicted y value for each x in the regression. -Syntax -STEYX(DataY; DataX) - -DataY is the array or matrix of Y data. - -DataX is the array or matrix of X data. -Example - -=STEXY(A1:A50;B1:B50) - -
-
+STEYX + Returns the standard error of the predicted y value for each x in the regression. + Syntax + STEYX(DataY; DataX) + + DataY is the array or matrix of Y data. + + DataX is the array or matrix of X data. + Example + + =STEXY(A1:A50;B1:B50) + +
+
DEVSQ function -sums;of squares of deviations + sums;of squares of deviations -DEVSQ -Returns the sum of squares of deviations based on a sample mean. -Syntax -DEVSQ(Number1; Number2; ...Number30) - -Number1, Number2, ...Number30 numerical values or ranges representing a sample. -Example - -=DEVSQ(A1:A50) - -
-
+DEVSQ + Returns the sum of squares of deviations based on a sample mean. + Syntax + DEVSQ(Number1; Number2; ...Number30) + + Number1, Number2, ...Number30 numerical values or ranges representing a sample. + Example + + =DEVSQ(A1:A50) + +
+
TINV function -inverse of t-distribution + inverse of t-distribution -TINV -Returns the inverse of the t-distribution. -Syntax -TINV(Number; DegreesFreedom) - -Number is the probability associated with the two-tailed t-distribution. - -DegreesFreedom is the number of degrees of freedom for the t-distribution. -Example - -=TINV(0.1;6) returns 1.94 -
-
+TINV + Returns the inverse of the t-distribution. + Syntax + TINV(Number; DegreesFreedom) + + Number is the probability associated with the two-tailed t-distribution. + + DegreesFreedom is the number of degrees of freedom for the t-distribution. + Example + + =TINV(0.1;6) returns 1.94 +
+
TTEST function -TTEST -Returns the probability associated with a Student's t-Test. -Syntax -TTEST(Data1; Data2; Mode; Type) - -Data1 is the dependent array or range of data for the first record. - -Data2 is the dependent array or range of data for the second record. - -Mode = 1 calculates the one-tailed test, Mode = 2 the two- tailed test. - -Type is the kind of t-test to perform. Type 1 means paired. Type 2 means two samples, equal variance (homoscedastic). Type 3 means two samples, unequal variance (heteroscedastic). -Example - -=TTEST(A1:A50;B1:B50;2;2) - -
-
+TTEST + Returns the probability associated with a Student's t-Test. + Syntax + TTEST(Data1; Data2; Mode; Type) + + Data1 is the dependent array or range of data for the first record. + + Data2 is the dependent array or range of data for the second record. + + Mode = 1 calculates the one-tailed test, Mode = 2 the two- tailed test. + + Type is the kind of t-test to perform. Type 1 means paired. Type 2 means two samples, equal variance (homoscedastic). Type 3 means two samples, unequal variance (heteroscedastic). + Example + + =TTEST(A1:A50;B1:B50;2;2) + +
+
TDIST function -t-distribution + t-distribution -TDIST -Returns the t-distribution. -Syntax -TDIST(Number; DegreesFreedom; Mode) - -Number is the value for which the t-distribution is calculated. - -DegreesFreedom is the number of degrees of freedom for the t-distribution. - -Mode = 1 returns the one-tailed test, Mode = 2 returns the two-tailed test. -Example - -=TDIST(12;5;1) - -
-
+TDIST + Returns the t-distribution. + Syntax + TDIST(Number; DegreesFreedom; Mode) + + Number is the value for which the t-distribution is calculated. + + DegreesFreedom is the number of degrees of freedom for the t-distribution. + + Mode = 1 returns the one-tailed test, Mode = 2 returns the two-tailed test. + Example + + =TDIST(12;5;1) + +
+
VAR function -variances + variances -VAR -Estimates the variance based on a sample. -Syntax -VAR(Number1; Number2; ...Number30) - -Number1, Number2, ...Number30 are numerical values or ranges representing a sample based on an entire population. -Example - -=VAR(A1:A50) - -
-
+VAR + Estimates the variance based on a sample. + Syntax + VAR(Number1; Number2; ...Number30) + + Number1, Number2, ...Number30 are numerical values or ranges representing a sample based on an entire population. + Example + + =VAR(A1:A50) + +
+
VARA function -VARA -Estimates a variance based on a sample. The value of text is 0. -Syntax -VARA(Value1; Value2; ...Value30) - -Value1, Value2,...Value30 are values or ranges representing a sample derived from an entire population. Text has the value 0. -Example - -=VARA(A1:A50) - -
-
+VARA + Estimates a variance based on a sample. The value of text is 0. + Syntax + VARA(Value1; Value2; ...Value30) + + Value1, Value2,...Value30 are values or ranges representing a sample derived from an entire population. Text has the value 0. + Example + + =VARA(A1:A50) + +
+
VARP function -VARP -Calculates a variance based on the entire population. -Syntax -VARP(Number1; Number2; ...Number30) - -Number1, Number2, ...Number30 are numerical values or ranges representing an entire population. -Example - -=VARP(A1:A50) - -
-
+VARP + Calculates a variance based on the entire population. + Syntax + VARP(Number1; Number2; ...Number30) + + Number1, Number2, ...Number30 are numerical values or ranges representing an entire population. + Example + + =VARP(A1:A50) + +
+
VARPA function -VARPA -Calculates the variance based on the entire population. The value of text is 0. -Syntax -VARPA(Value1; Value2; ...Value30) - -Value1,value2,...Value30 are values or ranges representing an entire population. -Example - -=VARPA(A1:A50) - -
-
+VARPA + Calculates the variance based on the entire population. The value of text is 0. + Syntax + VARPA(Value1; Value2; ...Value30) + + Value1,value2,...Value30 are values or ranges representing an entire population. + Example + + =VARPA(A1:A50) + +
+
PERMUT function -number of permutations + number of permutations -PERMUT -Returns the number of permutations for a given number of objects. -Syntax -PERMUT(Count1; Count2) - -Count1 is the total number of objects. - -Count2 is the number of objects in each permutation. -Example - -=PERMUT(6;3) returns 120. There are 120 different possibilities, to pick a sequence of 3 playing cards out of 6 playing cards. -
-
+PERMUT + Returns the number of permutations for a given number of objects. + Syntax + PERMUT(Count1; Count2) + + Count1 is the total number of objects. + + Count2 is the number of objects in each permutation. + Example + + =PERMUT(6;3) returns 120. There are 120 different possibilities, to pick a sequence of 3 playing cards out of 6 playing cards. +
+
PERMUTATIONA function -PERMUTATIONA -Returns the number of permutations for a given number of objects (repetition allowed). -Syntax -PERMUTATIONA(Count1; Count2) - -Count1 is the total number of objects. - -Count2 is the number of objects in each permutation. -Example -How often can 2 objects be selected from a total of 11 objects? - -=PERMUTATIONA(11;2) returns 121. - -=PERMUTATIONA(6;3) returns 216. There are 216 different possibilities to put a sequence of 3 playing cards together out of six playing cards if every card is returned before the next one is drawn. -
-
+PERMUTATIONA + Returns the number of permutations for a given number of objects (repetition allowed). + Syntax + PERMUTATIONA(Count1; Count2) + + Count1 is the total number of objects. + + Count2 is the number of objects in each permutation. + Example + How often can 2 objects be selected from a total of 11 objects? + + =PERMUTATIONA(11;2) returns 121. + + =PERMUTATIONA(6;3) returns 216. There are 216 different possibilities to put a sequence of 3 playing cards together out of six playing cards if every card is returned before the next one is drawn. +
+
PROB function -PROB -Returns the probability that values in a range are between two limits. If there is no End value, this function calculates the probability based on the principle that the Data values are equal to the value of Start. -Syntax -PROB(Data; Probability; Start; End) - -Data is the array or range of data in the sample. - -Probability is the array or range of the corresponding probabilities. - -Start is the start value of the interval whose probabilities are to be summed. - -End (optional) is the end value of the interval whose probabilities are to be summed. If this parameter is missing, the probability for the Start value is calculated. -Example - -=PROB(A1:A50;B1:B50;50;60) returns the probability with which a value within the range of A1:A50 is also within the limits between 50 and 60. Every value within the range of A1:A50 has a probability within the range of B1:B50. -
-
+PROB + Returns the probability that values in a range are between two limits. If there is no End value, this function calculates the probability based on the principle that the Data values are equal to the value of Start. + Syntax + PROB(Data; Probability; Start; End) + + Data is the array or range of data in the sample. + + Probability is the array or range of the corresponding probabilities. + + Start is the start value of the interval whose probabilities are to be summed. + + End (optional) is the end value of the interval whose probabilities are to be summed. If this parameter is missing, the probability for the Start value is calculated. + Example + + =PROB(A1:A50;B1:B50;50;60) returns the probability with which a value within the range of A1:A50 is also within the limits between 50 and 60. Every value within the range of A1:A50 has a probability within the range of B1:B50. +
+
WEIBULL function -WEIBULL -Returns the values of the Weibull distribution. -Syntax -WEIBULL(Number; Alpha; Beta; C) - -Number is the value at which to calculate the Weibull distribution. - -Alpha is the Alpha parameter of the Weibull distribution. - -Beta is the Beta parameter of the Weibull distribution. - -C indicates the type of function. If C equals 0 the form of the function is calculated, if C equals 1 the distribution is calculated. -Example - -=WEIBULL(2;1;1;1) returns 0.86. -
+WEIBULL + Returns the values of the Weibull distribution. + The Weibull distribution is a continuous probability distribution, with parameters Alpha > 0 (shape) and Beta > 0 (scale). + If C is 1, WEIBULL calculates the probability density function. + If C is 0, WEIBULL calculates the cumulative distribution function. + Syntax + WEIBULL(Number; Alpha; Beta; C) + + Number is the value at which to calculate the Weibull distribution. + + Alpha is the shape parameter of the Weibull distribution. + + Beta is the scale parameter of the Weibull distribution. + + C indicates the type of function. If C equals 0 the form of the function is calculated, if C equals 1 the distribution is calculated. + Example + + =WEIBULL(2;1;1;1) returns 0.86. + See also the Wiki page. +
- -
- - + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/01/func_datevalue.xhp b/helpcontent2/source/text/scalc/01/func_datevalue.xhp index 3fc44c72a8..2705f30706 100644 --- a/helpcontent2/source/text/scalc/01/func_datevalue.xhp +++ b/helpcontent2/source/text/scalc/01/func_datevalue.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -DATEVALUE -/text/scalc/01/func_datevalue.xhp - - - + + DATEVALUE + /text/scalc/01/func_datevalue.xhp + + + DATEVALUE function -DATEVALUE + +DATEVALUE -Returns the internal date number for text in quotes. -The internal date number is returned as a number. The number is determined by the date system that is used by $[officename] to calculate dates. -Syntax -DATEVALUE("Text") - -Text is a valid date expression and must be entered with quotation marks. -Example - -=DATEVALUE("1954-07-20") yields 19925. - - + Returns the internal date number for text in quotes. + The internal date number is returned as a number. The number is determined by the date system that is used by $[officename] to calculate dates. + If the text string also includes a time value, DATEVALUE only returns the integer part of the conversion. + Syntax + DATEVALUE("Text") + + Text is a valid date expression and must be entered with quotation marks. + Example + + =DATEVALUE("1954-07-20") yields 19925. + + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/01/func_timevalue.xhp b/helpcontent2/source/text/scalc/01/func_timevalue.xhp index 36d17c5661..5d3fc10210 100644 --- a/helpcontent2/source/text/scalc/01/func_timevalue.xhp +++ b/helpcontent2/source/text/scalc/01/func_timevalue.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -TIMEVALUE -/text/scalc/01/func_timevalue.xhp - - - + + TIMEVALUE + /text/scalc/01/func_timevalue.xhp + + + TIMEVALUE function -TIMEVALUE + +TIMEVALUE -TIMEVALUE returns the internal time number from a text enclosed by quotes and which may show a possible time entry format. -The internal number indicated as a decimal is the result of the date system used under $[officename] to calculate date entries. -Syntax -TIMEVALUE("Text") - -Text is a valid time expression and must be entered in quotation marks. -Examples - -=TIMEVALUE("4PM") returns 0.67. When formatting in time format HH:MM:SS, you then get 16:00:00. - -=TIMEVALUE("24:00") returns 1. If you use the HH:MM:SS time format, the value is 00:00:00. - - + TIMEVALUE returns the internal time number from a text enclosed by quotes and which may show a possible time entry format. + The internal number indicated as a decimal is the result of the date system used under $[officename] to calculate date entries. + If the text string also includes a year, month, or day, TIMEVALUE only returns the fractional part of the conversion. + Syntax + TIMEVALUE("Text") + + Text is a valid time expression and must be entered in quotation marks. + Examples + + =TIMEVALUE("4PM") returns 0.67. When formatting in time format HH:MM:SS, you then get 16:00:00. + + =TIMEVALUE("24:00") returns 1. If you use the HH:MM:SS time format, the value is 00:00:00. + + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/01/makefile.mk b/helpcontent2/source/text/scalc/01/makefile.mk index 268654dd3f..29a55031b1 100644 --- a/helpcontent2/source/text/scalc/01/makefile.mk +++ b/helpcontent2/source/text/scalc/01/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.13.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/scalc/02/makefile.mk b/helpcontent2/source/text/scalc/02/makefile.mk index de57389899..149244a428 100644 --- a/helpcontent2/source/text/scalc/02/makefile.mk +++ b/helpcontent2/source/text/scalc/02/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/scalc/04/makefile.mk b/helpcontent2/source/text/scalc/04/makefile.mk index 549da6624b..933e7ea1a6 100644 --- a/helpcontent2/source/text/scalc/04/makefile.mk +++ b/helpcontent2/source/text/scalc/04/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/scalc/05/makefile.mk b/helpcontent2/source/text/scalc/05/makefile.mk index 891c629076..8e39fbab02 100644 --- a/helpcontent2/source/text/scalc/05/makefile.mk +++ b/helpcontent2/source/text/scalc/05/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.9.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/scalc/guide/cell_enter.xhp b/helpcontent2/source/text/scalc/guide/cell_enter.xhp index eb7e171b79..ad62741db3 100644 --- a/helpcontent2/source/text/scalc/guide/cell_enter.xhp +++ b/helpcontent2/source/text/scalc/guide/cell_enter.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Entering Values -/text/scalc/guide/cell_enter.xhp - - - + + Entering Values + /text/scalc/guide/cell_enter.xhp + + + values; inserting in multiple cells -inserting;values -cell ranges;selecting for data entries -areas, see also cell ranges + inserting;values + cell ranges;selecting for data entries + areas, see also cell ranges -Entering Values +Entering Values -Calc can simplify entering data and values into multiple cells. You can change some settings to conform to your preferences. -To enter values into a range of cells manually -There are two features that assist you when you enter a block of data manually. -Area detection for new rows -In the row below a heading row, you can advance from one cell to the next with the Tab key. After you enter the value into the last cell in the current row, press Enter. Calc positions the cursor below the first cell of the current block. - -area detection + Calc can simplify entering data and values into multiple cells. You can change some settings to conform to your preferences. + To enter values into a range of cells manually + There are two features that assist you when you enter a block of data manually. + Area detection for new rows + In the row below a heading row, you can advance from one cell to the next with the Tab key. After you enter the value into the last cell in the current row, press Enter. Calc positions the cursor below the first cell of the current block. + +area detection -In row 3, press Tab to advance from cell B3 to C3, D3, and E3. Then press Enter to advance to B4. -Area selection -Use drag-and-drop to select the area where you want to input values. But start dragging from the last cell of the area and release the mouse button when you have selected the first cell. Now you can start to input values. Always press the Tab key to advance to the next cell. You will not leave the selected area. - -area selection - -Select the area from E7 to B3. Now B3 is waiting for your input. Press Tab to advance to the next cell within the selected area. -To enter values to a range of cells automatically -See Automatically Filling in Data Based on Adjacent Cells. -
- - - -
- - + In row 3, press Tab to advance from cell B3 to C3, D3, and E3. Then press Enter to advance to B4. + Area selection + Use drag-and-drop to select the area where you want to input values. But start dragging from the last cell of the area and release the mouse button when you have selected the first cell. Now you can start to input values. Always press the Tab key to advance to the next cell. You will not leave the selected area. + +area selection + The image shows the selected area in high-contrast. Should we use transparent? Must be localized then... + Select the area from E7 to B3. Now B3 is waiting for your input. Press Tab to advance to the next cell within the selected area. + To enter values to a range of cells automatically + See Automatically Filling in Data Based on Adjacent Cells. +
+ + + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/guide/database_sort.xhp b/helpcontent2/source/text/scalc/guide/database_sort.xhp index 0a274439f3..dd5749e33d 100755 --- a/helpcontent2/source/text/scalc/guide/database_sort.xhp +++ b/helpcontent2/source/text/scalc/guide/database_sort.xhp @@ -1,72 +1,78 @@ - - - + + - - - + + - -Sorting Database Ranges -/text/scalc/guide/database_sort.xhp - - - + + Sorting Data + /text/scalc/guide/database_sort.xhp + + + database ranges; sorting -sorting; database ranges -data;sorting in databases + sorting; database ranges + data;sorting in databases -Sorting Database Ranges +Sorting Data - - -Click in a database range. - - -Choose Data - Sort. - - -Select the sort options that you want. - - -Click OK. - - -
- - -Wiki page about defining a data range -
- - + + + Click in a database range. + If you select a range of cells, only these cells will get sorted. If you just click one cell without selecting, then the whole database range will get sorted. + + + Choose Data - Sort. + The range of cells that will get sorted is shown in inverted colors. + + + Select the sort options that you want. + + + Click OK. + + +
+ + + Wiki page about defining a data range +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/guide/makefile.mk b/helpcontent2/source/text/scalc/guide/makefile.mk index b3aa776e36..946110e6db 100644 --- a/helpcontent2/source/text/scalc/guide/makefile.mk +++ b/helpcontent2/source/text/scalc/guide/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.18.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/scalc/guide/rename_table.xhp b/helpcontent2/source/text/scalc/guide/rename_table.xhp index c1182391de..04dfda9299 100644 --- a/helpcontent2/source/text/scalc/guide/rename_table.xhp +++ b/helpcontent2/source/text/scalc/guide/rename_table.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: rename_table.xhp,v $ - * $Revision: 1.8.4.2 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,69 +35,71 @@ - -Renaming Sheets -/text/scalc/guide/rename_table.xhp - - - -renaming sheets -sheet tabs;renaming -tables;renaming -names; sheets -mw deleted "sheets;..." -Renaming Sheets + + Renaming Sheets + /text/scalc/guide/rename_table.xhp + + + +renaming;sheets + sheet tabs;renaming + tables;renaming + names; sheets +mw made "renaming sheets" a two level entry. +Renaming Sheets - - -Click the name of the sheet that you want to change. - - -Open the context menu and choose the Rename command. A dialog box appears where you can enter a new name. - - -Enter a new name for the sheet and click OK. - - -Alternatively, hold down the Option keyAlt key and click on any sheet name and enter the new name directly. - - - -Sheet names can contain almost any character. Some naming restrictions apply when you want to save the spreadsheet to Microsoft Excel format. -When saving to Microsoft Excel format, the following characters are not allowed in sheet names: - - -colon : - - -back slash \ - - -forward slash / - - -question mark ? - - -asterisk * - - -left square bracket [ - - -right square bracket ] - - -single quote ' as the first or last character of the name - - -In cell references, a sheet name has to be enclosed in single quotes ' if the name contains other characters than alphanumeric or underscore. A single quote contained within a name has to be escaped by doubling it (two single quotes). For example, you want to reference the cell A1 on a sheet with the following name: -This year's sheet -The reference must be enclosed in single quotes, and the one single quote inside the name must be doubled: -'This year''s sheet'.A1 -The name of a sheet is independent of the name of the spreadsheet. You enter the spreadsheet name when you save it for the first time as a file. The document can contain up to 256 individual sheets, which can have different names. -
- -
- - + + + Click the name of the sheet that you want to change. + + + Open the context menu and choose the Rename command. A dialog box appears where you can enter a new name. + + + Enter a new name for the sheet and click OK. + + + Alternatively, hold down the Option key +Alt key and click on any sheet name and enter the new name directly. + + + + Sheet names can contain almost any character. Some naming restrictions apply when you want to save the spreadsheet to Microsoft Excel format. + When saving to Microsoft Excel format, the following characters are not allowed in sheet names: + + + colon : + + + back slash \ + + + forward slash / + + + question mark ? + + + asterisk * + + + left square bracket [ + + + right square bracket ] + + + single quote ' as the first or last character of the name + + + In cell references, a sheet name has to be enclosed in single quotes ' if the name contains other characters than alphanumeric or underscore. A single quote contained within a name has to be escaped by doubling it (two single quotes). For example, you want to reference the cell A1 on a sheet with the following name: + This year's sheet + The reference must be enclosed in single quotes, and the one single quote inside the name must be doubled: + 'This year''s sheet'.A1 + The name of a sheet is independent of the name of the spreadsheet. You enter the spreadsheet name when you save it for the first time as a file. The document can contain up to 256 individual sheets, which can have different names. +
+ +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/guide/value_with_name.xhp b/helpcontent2/source/text/scalc/guide/value_with_name.xhp index 0b468e8de5..f5dba0752d 100755 --- a/helpcontent2/source/text/scalc/guide/value_with_name.xhp +++ b/helpcontent2/source/text/scalc/guide/value_with_name.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Naming Cells -/text/scalc/guide/value_with_name.xhp - - - + + Naming Cells + /text/scalc/guide/value_with_name.xhp + + + cells; defining names -names; defining for cells -values; defining names -constants definition -variables; defining names -cell ranges; defining names -defining;names for cell ranges -formulas; defining names -addressing; by defined names -cell names; defining/addressing -references; by defined names -allowed cell names -mw changed index entry "defining;..."mw copied three index entries from Calc guide address_byname, deleted "cell names;in formulas" and changed the remaining "cell names;..."entry.mw changed "names;...", "addressing;..." and "references,..." entries.Naming Cells + names; defining for cells + values; defining names + constants definition + variables; defining names + cell ranges; defining names + defining;names for cell ranges + formulas; defining names + addressing; by defined names + cell names; defining/addressing + references; by defined names + allowed cell names + renaming;cells +mw changed "names;...", "addressing;..." and "references,..." entries.mw added "renaming;" +Naming Cells -Allowed names -Names in Calc can contain letters, numeric characters, and some special characters. Names must start with a letter or an underline character. -Allowed special characters: - - -underline (_) - - -period (.) - allowed within a name, but not as first or last character - - -blank ( ) - allowed within a name, but not as first or last character, and not for a cell range - - -Names must not be the same as cell references. For example, the name A1 is invalid because A1 is a cell reference to the top left cell. -Names for cell ranges must not include blanks. Blanks are allowed within names for single cells, sheets and documents. -Naming cells and formulas -A good way of making the references to cells and cell ranges in formulas legible is to give the ranges names. For example, you can name the range A1:B2 Start. You can then write a formula such as "=SUM(Start)". Even after you insert or delete rows or columns, $[officename] still correctly assigns the ranges identified by name. Range names must not contain any spaces. -For example, it is much easier to read a formula for sales tax if you can write "= Amount * Tax_rate" instead of "= A5 * B12". In this case, you would name cell A5 "Amount" and cell B12 "Tax_rate." -Use the Define Names dialog to define names for formulas or parts of formulas you need more often. In order to specify range names, - - -Select a cell or range of cells, then choose Insert - Names - Define. The Define Names dialog appears. - - -Type the name of the selected area in the Name field. Click Add. The newly defined name appears in the list below. Click OK to close the dialog. - - -You can also name other cell ranges in this dialog by entering the name in the field and then selecting the respective cells. -If you type the name in a formula, after the first few characters entered you will see the entire name as a tip. - - -Press the Enter key in order to accept the name from the tip. - - -If more than one name starts with the same characters, you can scroll through all the names using the Tab key.mw copied contents from Calc guide address_byname.xhp - - -
-Insert - Names - Define - - -mw deleted one EMBED paragraph and copied two EMBED paragraphs from Calc guide address_byname.xhp
- - + Allowed names + Names in Calc can contain letters, numeric characters, and some special characters. Names must start with a letter or an underline character. + Allowed special characters: + + + underline (_) + + + period (.) - allowed within a name, but not as first or last character + + + blank ( ) - allowed within a name, but not as first or last character, and not for a cell range + + + Names must not be the same as cell references. For example, the name A1 is invalid because A1 is a cell reference to the top left cell. + Names for cell ranges must not include blanks. Blanks are allowed within names for single cells, sheets and documents. + Naming cells and formulas + A good way of making the references to cells and cell ranges in formulas legible is to give the ranges names. For example, you can name the range A1:B2 Start. You can then write a formula such as "=SUM(Start)". Even after you insert or delete rows or columns, $[officename] still correctly assigns the ranges identified by name. Range names must not contain any spaces. + For example, it is much easier to read a formula for sales tax if you can write "= Amount * Tax_rate" instead of "= A5 * B12". In this case, you would name cell A5 "Amount" and cell B12 "Tax_rate." + Use the Define Names dialog to define names for formulas or parts of formulas you need more often. In order to specify range names, + + + Select a cell or range of cells, then choose Insert - Names - Define. The Define Names dialog appears. + + + Type the name of the selected area in the Name field. Click Add. The newly defined name appears in the list below. Click OK to close the dialog. + + + You can also name other cell ranges in this dialog by entering the name in the field and then selecting the respective cells. + If you type the name in a formula, after the first few characters entered you will see the entire name as a tip. + + + Press the Enter key in order to accept the name from the tip. + + + If more than one name starts with the same characters, you can scroll through all the names using the Tab key.mw copied contents from Calc guide address_byname.xhp + + +
+ Insert - Names - Define + + + mw deleted one EMBED paragraph and copied two EMBED paragraphs from Calc guide address_byname.xhp +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/main0104.xhp b/helpcontent2/source/text/scalc/main0104.xhp index ffcdacd4fa..0dce5acb56 100755 --- a/helpcontent2/source/text/scalc/main0104.xhp +++ b/helpcontent2/source/text/scalc/main0104.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Insert -/text/scalc/main0104.xhp - - - -
-Insert -The Insert menu contains commands for inserting new elements, such as cells, rows, sheets and cell names into the current sheet. -
- -Cells - - - -Sheet - - - -Special Character - - -Hyperlink - -Function - -Function List - - -Note -Note - - - - -Chart -Floating Frame - - - + + Insert + /text/scalc/main0104.xhp + + + +
+ +Insert + The Insert menu contains commands for inserting new elements, such as cells, rows, sheets and cell names into the current sheet. +
+ + Cells + + + + Sheet + + + + Special Character + + + Hyperlink + + Function + + Function List + + + Note + + + + + Chart + Inserts a chart. + Floating Frame + + + \ No newline at end of file diff --git a/helpcontent2/source/text/scalc/makefile.mk b/helpcontent2/source/text/scalc/makefile.mk index f4472b0ac3..1ec93f9333 100644 --- a/helpcontent2/source/text/scalc/makefile.mk +++ b/helpcontent2/source/text/scalc/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/schart/00/makefile.mk b/helpcontent2/source/text/schart/00/makefile.mk index 2695126e1b..1037b894cf 100644 --- a/helpcontent2/source/text/schart/00/makefile.mk +++ b/helpcontent2/source/text/schart/00/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/schart/01/04020000.xhp b/helpcontent2/source/text/schart/01/04020000.xhp index 87ff3f5919..7853d2a62e 100644 --- a/helpcontent2/source/text/schart/01/04020000.xhp +++ b/helpcontent2/source/text/schart/01/04020000.xhp @@ -59,7 +59,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon diff --git a/helpcontent2/source/text/schart/01/04050000.xhp b/helpcontent2/source/text/schart/01/04050000.xhp index b4ee3a429f..b990bdc4b5 100644 --- a/helpcontent2/source/text/schart/01/04050000.xhp +++ b/helpcontent2/source/text/schart/01/04050000.xhp @@ -41,7 +41,7 @@ - + Y Error Barsi85330 Use the Y Error Bars dialog to display error bars for 2D charts. diff --git a/helpcontent2/source/text/schart/01/04050100.xhp b/helpcontent2/source/text/schart/01/04050100.xhp index ca27bfda9c..0386615f91 100644 --- a/helpcontent2/source/text/schart/01/04050100.xhp +++ b/helpcontent2/source/text/schart/01/04050100.xhp @@ -46,8 +46,8 @@ trend lines in charts mean value lines in charts - -Trend Lines + +Trend Lines Regression curves, also known as trend lines, can be added to all 2D chart types except for Pie and Stock charts. @@ -147,4 +147,4 @@ Y Error Bars tab page
- \ No newline at end of file + diff --git a/helpcontent2/source/text/schart/01/04060000.xhp b/helpcontent2/source/text/schart/01/04060000.xhp index 303638dc53..bd3c017fdc 100755 --- a/helpcontent2/source/text/schart/01/04060000.xhp +++ b/helpcontent2/source/text/schart/01/04060000.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Options -/text/schart/01/04060000.xhp - - - -
+ + Options + /text/schart/01/04060000.xhp + + + +
aligning; 2D charts -charts; aligning -pie charts;options + charts; aligning + pie charts;options -Options -Use this dialog to define some options that are available for specific chart types. The contents of the Options dialog vary with the chart type. -
-
- -
-Align data series to: -In this area you can choose between two Y axis scaling modes. The axes can only be scaled and given properties separately. +Options + Use this dialog to define some options that are available for specific chart types. The contents of the Options dialog vary with the chart type. +
+
+ +
+ Align data series to: + In this area you can choose between two Y axis scaling modes. The axes can only be scaled and given properties separately. -Primary Y axis -This option is active as default. All data series are aligned to the primary Y axis. + +Primary Y axis + This option is active as default. All data series are aligned to the primary Y axis. -Secondary Y axis -Changes the scaling of the Y axis. This axis is only visible when at least one data series is assigned to it and the axis view is active. -Settings -Define the settings for a bar chart in this area. Any changes apply to all data series of the chart, not to the selected data only. + +Secondary Y axis + Changes the scaling of the Y axis. This axis is only visible when at least one data series is assigned to it and the axis view is active. + Settings + Define the settings for a bar chart in this area. Any changes apply to all data series of the chart, not to the selected data only. -Spacing -Defines the spacing between the columns in percent. The maximal spacing is 600%. + +Spacing + Defines the spacing between the columns in percent. The maximal spacing is 600%. -Overlap -Defines the necessary settings for overlapping data series. You can choose between -100 and +100%. + +Overlap + Defines the necessary settings for overlapping data series. You can choose between -100 and +100%. -Connection Lines -For "stacked" and "percent" column (vertical bar) charts, mark this check box to connect the column layers that belong together with lines. -Show bars side by side -If two axes are shown in a bar chart, and some data series are attached to the first axis, while some other data series are attached to the second axis, then both sets of data series are shown independently, overlapping each other. -As a result, bars attached to the first y-axis are partly or completely hidden by bars attached to the second y-axis. To avoid this, enable the option to display bars side by side. The bars from different data series are shown as if they were attached only to one axis. -Clockwise direction -Available for pie and donut charts. The default direction in which the pieces of a pie chart are ordered is counterclockwise. Enable the Clockwise direction checkbox to draw the pieces in opposite direction. -Starting angle -Drag the small dot along the circle or click any position on the circle to set the starting angle of a pie or donut chart. The starting angle is the mathematical angle position where the first piece is drawn. The value of 90 degrees draws the first piece at the 12 o'clock position. A value of 0 degrees starts at the 3 o'clock position. -In 3D pie and donut charts that were created with older versions of the software, the starting angle is 0 degrees instead of 90 degrees. For old and new 2D charts the default starting angle is 90 degrees. -When you change the starting angle or the direction, only current versions of the software show the changed values. Older versions of the software display the same document using the default values: Always counterclockwise direction and a starting value of 90 degrees (2D pie charts) or 0 degrees (3D pie charts). -Degrees -Enter the starting angle between 0 and 359 degrees. You can also click the arrows to change the displayed value. - - + +Connection Lines + For "stacked" and "percent" column (vertical bar) charts, mark this check box to connect the column layers that belong together with lines. + +Show bars side by side + If two axes are shown in a bar chart, and some data series are attached to the first axis, while some other data series are attached to the second axis, then both sets of data series are shown independently, overlapping each other. + As a result, bars attached to the first y-axis are partly or completely hidden by bars attached to the second y-axis. To avoid this, enable the option to display bars side by side. The bars from different data series are shown as if they were attached only to one axis. + +Clockwise direction + Available for pie and donut charts. The default direction in which the pieces of a pie chart are ordered is counterclockwise. Enable the Clockwise direction checkbox to draw the pieces in opposite direction. + +Starting angle + Drag the small dot along the circle or click any position on the circle to set the starting angle of a pie or donut chart. The starting angle is the mathematical angle position where the first piece is drawn. The value of 90 degrees draws the first piece at the 12 o'clock position. A value of 0 degrees starts at the 3 o'clock position. + In 3D pie and donut charts that were created with older versions of the software, the starting angle is 0 degrees instead of 90 degrees. For old and new 2D charts the default starting angle is 90 degrees. + When you change the starting angle or the direction, only current versions of the software show the changed values. Older versions of the software display the same document using the default values: Always counterclockwise direction and a starting value of 90 degrees (2D pie charts) or 0 degrees (3D pie charts). + +Degrees + Enter the starting angle between 0 and 359 degrees. You can also click the arrows to change the displayed value. + Plot missing values + Sometimes values are missing in a data series that is shown in a chart. You can select from different options how to plot the missing values. The options are available for some chart types only. + +Leave gap + For a missing value, no data will be shown. This is the default for chart types Column, Bar, Line, Net. + +Assume zero + For a missing value, the y-value will be shown as zero. This is the default for chart type Area. + +Continue line + For a missing value, the interpolation from the neighbor values will be shown. This is the default for chart type XY. + Plot values from hidden cells + Check to also show values of currently hidden cells within the source cell range. + + \ No newline at end of file diff --git a/helpcontent2/source/text/schart/01/makefile.mk b/helpcontent2/source/text/schart/01/makefile.mk index ddacc17ede..4462fa3641 100644 --- a/helpcontent2/source/text/schart/01/makefile.mk +++ b/helpcontent2/source/text/schart/01/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.10.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/schart/01/type_pie.xhp b/helpcontent2/source/text/schart/01/type_pie.xhp index 17e196ba09..e5119ad1d1 100644 --- a/helpcontent2/source/text/schart/01/type_pie.xhp +++ b/helpcontent2/source/text/schart/01/type_pie.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Chart Type Pie -/text/schart/01/type_pie.xhp - - - + + Chart Type Pie + /text/schart/01/type_pie.xhp + + + donut charts -pie charts -chart types;pie/donut -mw made one index entry out of two "chart types;"Chart Type Pie + pie charts;types + chart types;pie/donut +mw made one index entry out of two "chart types;"mw made "pie charts" a two level entry +Chart Type Pie -On the first page of the Chart Wizard you can choose a chart type. -
- -
-Pie -A pie chart shows values as circular sectors of the total circle. The length of the arc, or the area of each sector, is proportional to its value. -Pie - this subtype shows sectors as colored areas of the total pie, for one data column only. In the created chart, you can click and drag any sector to separate that sector from the remaining pie or to join it back. -Exploded pie - this subtype shows the sectors already separated from each other. In the created chart, you can click and drag any sector to move it along a radial from the pie's center. -Donut - this subtype can show multiple data columns. Each data column is shown as one donut shape with a hole inside, where the next data column can be shown. In the created chart, you can click and drag an outer sector to move it along a radial from the donut's center. -Exploded donut - this subtype shows the outer sectors already separated from the remaining donut. In the created chart, you can click and drag an outer sector to move it along a radial from the donut's center. -
- - - - - -
- - + On the first page of the Chart Wizard you can choose a chart type. +
+ +
+ Pie + A pie chart shows values as circular sectors of the total circle. The length of the arc, or the area of each sector, is proportional to its value. + Pie - this subtype shows sectors as colored areas of the total pie, for one data column only. In the created chart, you can click and drag any sector to separate that sector from the remaining pie or to join it back. + Exploded pie - this subtype shows the sectors already separated from each other. In the created chart, you can click and drag any sector to move it along a radial from the pie's center. + Donut - this subtype can show multiple data columns. Each data column is shown as one donut shape with a hole inside, where the next data column can be shown. In the created chart, you can click and drag an outer sector to move it along a radial from the donut's center. + Exploded donut - this subtype shows the outer sectors already separated from the remaining donut. In the created chart, you can click and drag an outer sector to move it along a radial from the donut's center. +
+ + + + + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/schart/02/makefile.mk b/helpcontent2/source/text/schart/02/makefile.mk index acdebe7a5f..ad750ef65c 100644 --- a/helpcontent2/source/text/schart/02/makefile.mk +++ b/helpcontent2/source/text/schart/02/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/schart/04/makefile.mk b/helpcontent2/source/text/schart/04/makefile.mk index 8e1b65540b..4e976204ed 100644 --- a/helpcontent2/source/text/schart/04/makefile.mk +++ b/helpcontent2/source/text/schart/04/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/schart/makefile.mk b/helpcontent2/source/text/schart/makefile.mk index 2f0fbb43d5..463e6311b6 100644 --- a/helpcontent2/source/text/schart/makefile.mk +++ b/helpcontent2/source/text/schart/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.9.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/sdraw/00/makefile.mk b/helpcontent2/source/text/sdraw/00/makefile.mk index eec47dcbeb..ee8c1db3b2 100644 --- a/helpcontent2/source/text/sdraw/00/makefile.mk +++ b/helpcontent2/source/text/sdraw/00/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/sdraw/01/makefile.mk b/helpcontent2/source/text/sdraw/01/makefile.mk index 9d679d5b1e..b495a3be8d 100644 --- a/helpcontent2/source/text/sdraw/01/makefile.mk +++ b/helpcontent2/source/text/sdraw/01/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/sdraw/04/makefile.mk b/helpcontent2/source/text/sdraw/04/makefile.mk index b8af3f6a4f..4789f5ce64 100644 --- a/helpcontent2/source/text/sdraw/04/makefile.mk +++ b/helpcontent2/source/text/sdraw/04/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/sdraw/guide/makefile.mk b/helpcontent2/source/text/sdraw/guide/makefile.mk index 5ba3e99006..c5e840a03e 100644 --- a/helpcontent2/source/text/sdraw/guide/makefile.mk +++ b/helpcontent2/source/text/sdraw/guide/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.9.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/sdraw/guide/rotate_object.xhp b/helpcontent2/source/text/sdraw/guide/rotate_object.xhp index 651669eec8..18fc81a2fe 100644 --- a/helpcontent2/source/text/sdraw/guide/rotate_object.xhp +++ b/helpcontent2/source/text/sdraw/guide/rotate_object.xhp @@ -53,7 +53,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -69,7 +69,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon diff --git a/helpcontent2/source/text/sdraw/main0104.xhp b/helpcontent2/source/text/sdraw/main0104.xhp index 9dc2a7340c..8cc10567a5 100755 --- a/helpcontent2/source/text/sdraw/main0104.xhp +++ b/helpcontent2/source/text/sdraw/main0104.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Insert -/text/sdraw/main0104.xhp - - - -
-Insert -This menu allows you to insert elements, such as graphics and guides, into Draw documents. -
-Slide - - -Layer - -Insert Snap Point/Line - - -Special Character - - -Hyperlink - -Table - - - - -Chart -Floating Frame - -File - - - + + Insert + /text/sdraw/main0104.xhp + + + +
+ Insert + This menu allows you to insert elements, such as graphics and guides, into Draw documents. +
+ Slide + + + Layer + + Insert Snap Point/Line + + + Special Character + + + Hyperlink + + Table + + + + + Chart + Inserts a chart. + Floating Frame + + File + + + \ No newline at end of file diff --git a/helpcontent2/source/text/sdraw/makefile.mk b/helpcontent2/source/text/sdraw/makefile.mk index ec32369954..ca6ba78b08 100644 --- a/helpcontent2/source/text/sdraw/makefile.mk +++ b/helpcontent2/source/text/sdraw/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/shared/00/00000001.xhp b/helpcontent2/source/text/shared/00/00000001.xhp index f0840beb2e..55625fbee8 100644 --- a/helpcontent2/source/text/shared/00/00000001.xhp +++ b/helpcontent2/source/text/shared/00/00000001.xhp @@ -175,7 +175,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -185,7 +185,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon diff --git a/helpcontent2/source/text/shared/00/00000401.xhp b/helpcontent2/source/text/shared/00/00000401.xhp index 560fec4726..340f31fb65 100644 --- a/helpcontent2/source/text/shared/00/00000401.xhp +++ b/helpcontent2/source/text/shared/00/00000401.xhp @@ -54,7 +54,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -103,7 +103,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -224,7 +224,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -240,7 +240,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -335,7 +335,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -362,7 +362,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -383,7 +383,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -410,7 +410,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -428,7 +428,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon diff --git a/helpcontent2/source/text/shared/00/00000406.xhp b/helpcontent2/source/text/shared/00/00000406.xhp index cd019d9589..ded3b8b559 100644 --- a/helpcontent2/source/text/shared/00/00000406.xhp +++ b/helpcontent2/source/text/shared/00/00000406.xhp @@ -49,7 +49,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -72,7 +72,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -207,7 +207,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon diff --git a/helpcontent2/source/text/shared/00/makefile.mk b/helpcontent2/source/text/shared/00/makefile.mk index a9c8e493ad..65cbb49aaf 100644 --- a/helpcontent2/source/text/shared/00/makefile.mk +++ b/helpcontent2/source/text/shared/00/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.9.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/shared/01/02100000.xhp b/helpcontent2/source/text/shared/01/02100000.xhp index 5f612cf3dd..0087c1bd60 100644 --- a/helpcontent2/source/text/shared/01/02100000.xhp +++ b/helpcontent2/source/text/shared/01/02100000.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 02100000.xhp,v $ - * $Revision: 1.15.4.3 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,58 +35,61 @@ - -Find & Replace -/text/shared/01/02100000.xhp - - - -
lemw distributed the 7 index entries among "finding" guides in Writer (5 entries copied) and Calc (5 entries copied) + + Find & Replace + /text/shared/01/02100000.xhp + + + +
mw distributed the 7 index entries among "finding" guides in Writer (5 entries copied) and Calc (5 entries copied) -Find & Replace +Find & Replace -Searches for or replaces text or formats in the current document. + Searches for or replaces text or formats in the current document. -
-
- -
+
+
+ +
-Search For -Enter the text that you want to search for, or select a previous search from the list. +Search For + Enter the text that you want to search for, or select a previous search from the list. -Search options are listed in the Options area of the dialog +Search options are listed in the Options area of the dialog -Replace With -Enter the replacement text, or select a recent replacement text or style from the list. +Replace With + Enter the replacement text, or select a recent replacement text or style from the list. -Replacement options are listed in the Options area of the dialog. -Options +Replacement options are listed in the Options area of the dialog. + Options -Entire Cells +Entire Cells Whole words only -Searches for whole words or cells that are identical to the search text. + Searches for whole words or cells that are identical to the search text. -Backwards -Search starts at the current cursor position and goes backwards to the beginning of the file. +Backwards + Search starts at the current cursor position and goes backwards to the beginning of the file. - + Regular expressions - + Allows you to use wildcards in your search.i72448 Ext help text not found within switches. Solution: Keep switched text for normal display, add hidden help text as "fall through". -Allows you to use wildcards in your search. +Allows you to use wildcards in your search. @@ -96,20 +99,22 @@ Ext help text not found within switches. Solution: Keep switched text for normal -Match case +Match case case sensitivity;searching mw made "case sensitive.." a two level entry -Distinguishes between uppercase and lowercase characters. +Distinguishes between uppercase and lowercase characters. finding; selections -Current selection only -Searches only the selected text or cells.had to copy extended help to outside of switch construct - see issue 72448 +Current selection only + Searches only the selected text or cells.had to copy extended help to outside of switch construct - see issue 72448 -Searches for text formatted with the style that you specify. Select this checkbox, and then select a style from the Search for list. To specify a replacement style, select a style from the Replace with list. +Searches for text formatted with the style that you specify. Select this checkbox, and then select a style from the Search for list. To specify a replacement style, select a style from the Replace with list. @@ -118,124 +123,145 @@ Ext help text not found within switches. Solution: Keep switched text for normal -Search for Styles / Including Styles -Searches for text formatted with the style that you specify. Select this checkbox, and then select a style from the Search for list. To specify a replacement style, select a style from the Replace with list. -After you select the attributes that you want to search for, the Search for Styles box in the Options area of the %PRODUCTNAME Writer Find & Replace dialog changes to Including Styles. -If you want to search for text in which attributes were set by using direct formatting and styles, select the Including Styles box. - +Search for Styles / Including Styles + Searches for text formatted with the style that you specify. Select this checkbox, and then select a style from the Search for list. To specify a replacement style, select a style from the Replace with list. + After you select the attributes that you want to search for, the Search for Styles box in the Options area of the %PRODUCTNAME Writer Find & Replace dialog changes to Including Styles. + If you want to search for text in which attributes were set by using direct formatting and styles, select the Including Styles box. + +Notes + In Writer, you can select to include the notes texts in your searches. + - - + -Match character width (only if Asian languages are enabled) +Match character width (only if Asian languages are enabled) -Distinguishes between half-width and full-width character forms. + Distinguishes between half-width and full-width character forms. -Sounds like (Japanese) (only if Asian languages are enabled) +Sounds like (Japanese) (only if Asian languages are enabled) -Lets you specify the search options for similar notation used in Japanese text. Select this checkbox, and then click the ... button to specify the search options. + Lets you specify the search options for similar notation used in Japanese text. Select this checkbox, and then click the ... button to specify the search options. -Sets the search options for similar notation used in Japanese text. +Sets the search options for similar notation used in Japanese text. -Searching in Japanese + Searching in Japanese -Find All -Finds and selects all instances of the text or the format that you are searching for in the document (only in Writer and Calc documents). +Find All + Finds and selects all instances of the text or the format that you are searching for in the document (only in Writer and Calc documents). -Find -Finds and selects the next occurrence of the text or format that you searching for in the document. +Find + Finds and selects the next occurrence of the text or format that you searching for in the document. -Replace All -Replaces all of the occurrences of the text or format that you want to replace.Repeat this command until all replacements on your slide have been made. +Replace All + Replaces all of the occurrences of the text or format that you want to replace.Repeat this command until all replacements on your slide have been made. -Replace -Replaces the selected text or format that you searched for, and then searches for the next occurrence. -Attribute +Replace + Replaces the selected text or format that you searched for, and then searches for the next occurrence. + Attribute -Format +Format -Finds specific text formatting features, such as font types, font effects, and text flow characteristics. +Finds specific text formatting features, such as font types, font effects, and text flow characteristics. -No Format +No Format -Click in the Search for or the Replace with box, and then click this button to remove the search criteria based on formats. + Click in the Search for or the Replace with box, and then click this button to remove the search criteria based on formats. -Click in the Search for or the Replace with box, and then click this button to remove the search criteria based on formats. + Click in the Search for or the Replace with box, and then click this button to remove the search criteria based on formats. -The search criteria for formatting attributes are displayed under the Search for or the Replace with box. +The search criteria for formatting attributes are displayed under the Search for or the Replace with box. More Options / Less Options / Fewer Options - name subject to change -Shows more or fewer search options. Click this button again to hide the extended search options. -Search in +Shows more or fewer search options. Click this button again to hide the extended search options. + Search in -Formulas +Formulas -Searches for the characters that you specify in formulas and in fixed (not calculated) values. For example, you could look for formulas that contain 'SUM'. + Searches for the characters that you specify in formulas and in fixed (not calculated) values. For example, you could look for formulas that contain 'SUM'. -Values +Values -Searches for the characters that you specify in values and in the results of formulas. + Searches for the characters that you specify in values and in the results of formulas. -Searches for the characters that you specify in values and in the results of formulas. + Searches for the characters that you specify in values and in the results of formulas. -Notes +Notes -Searches for the characters that you specify in the notes that are attached to the cells. + Searches for the characters that you specify in the notes that are attached to the cells. -Searches for the characters that you specify in the notes that are attached to the cells. -Search direction + Searches for the characters that you specify in the notes that are attached to the cells. + Search direction -Determines the order for searching the cells. + Determines the order for searching the cells. -By Rows +By Rows -Searches from left to right across the rows. + Searches from left to right across the rows. -By Columns +By Columns -Searches from top to bottom through the columns. + Searches from top to bottom through the columns. -Searches from top to bottom through the columns. -Extras + Searches from top to bottom through the columns. + Extras searching; all sheets -finding; in all sheets -sheets; searching all + finding; in all sheets + sheets; searching all -Search in all sheets +Search in all sheets -Searches through all of the sheets in the current spreadsheet file. + Searches through all of the sheets in the current spreadsheet file. -Searches through all of the sheets in the current spreadsheet file. - -After you close the Find & Replace dialog, you can still search using the last search criteria that you entered, by pressing Shift+Command + Searches through all of the sheets in the current spreadsheet file. + + After you close the Find & Replace dialog, you can still search using the last search criteria that you entered, by pressing Shift+Command Ctrl+F. -
- - -
- - +
+ + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/01/02110000.xhp b/helpcontent2/source/text/shared/01/02110000.xhp index ad1acee33f..0a0d8f6d86 100644 --- a/helpcontent2/source/text/shared/01/02110000.xhp +++ b/helpcontent2/source/text/shared/01/02110000.xhp @@ -58,7 +58,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -75,7 +75,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -93,7 +93,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -132,7 +132,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -165,7 +165,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -182,7 +182,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -199,7 +199,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon diff --git a/helpcontent2/source/text/shared/01/02230401.xhp b/helpcontent2/source/text/shared/01/02230401.xhp index deed07c0a1..3e4d4f9cf1 100644 --- a/helpcontent2/source/text/shared/01/02230401.xhp +++ b/helpcontent2/source/text/shared/01/02230401.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 02230401.xhp,v $ - * $Revision: 1.5.4.1 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -101,7 +101,6 @@ - @@ -117,26 +116,35 @@ Lists the cells with contents that were changed. -Author -Lists the user who made the change. +Author + Lists the user who made the change. -Date -Lists the date and time that the change was made. +Date + Lists the date and time that the change was made. -Comment -Lists the comments that are attached to the change. +Comment + Lists the comments that are attached to the change. -Accept -Accepts the selected change and removes the highlighting from the change in the document. + +Accept + Accepts the selected change and removes the highlighting from the change in the document. -Reject -Rejects the selected change and removes the highlighting from the change in the document. + +Reject + Rejects the selected change and removes the highlighting from the change in the document. -Accept All -Accepts all of the changes and removes the highlighting from the document. +Accept All + Accepts all of the changes and removes the highlighting from the document. -Reject All -Rejects all of the changes and removes the highlighting from the document. +Reject All + Rejects all of the changes and removes the highlighting from the document. To reverse the acceptance or rejection of a change, choose Undo on the Edit menu. @@ -147,27 +155,34 @@ If you made changes by choosing Format - AutoCorrect - Apply and Edit Changes, the Undo button appears in the dialog. Reverse the last Accept or Reject command. -There are additional commands in the context menu of the list: + There are additional commands in the context menu of the list: -Edit comment -Edit the comment for the selected change. -Sort -Sorts the list according to the column headings. +Edit comment + Edit the comment for the selected change. + Sort + Sorts the list according to the column headings. -Action -Sorts the list according to the type of change. +Action + Sorts the list according to the type of change. -Author -Sorts the list according to the Author. +Author + Sorts the list according to the Author. -Date -Sorts the list according to the date and time. +Date + Sorts the list according to the date and time. -Comment -Sorts the list according to the comments that are attached to the changes. +Comment + Sorts the list according to the comments that are attached to the changes. -Document Position -Sorts the list in a descending order according to the position of the changes in the document. This is the default sorting method. - - +Document Position + Sorts the list in a descending order according to the position of the changes in the document. This is the default sorting method. + + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/01/04050000.xhp b/helpcontent2/source/text/shared/01/04050000.xhp index d4129c08fd..30d5082362 100644 --- a/helpcontent2/source/text/shared/01/04050000.xhp +++ b/helpcontent2/source/text/shared/01/04050000.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 04050000.xhp,v $ - * $Revision: 1.10.4.2 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,74 +35,73 @@ - -Notes -/text/shared/01/04050000.xhp - - - + + Notes + /text/shared/01/04050000.xhp + + + notes;inserting/editing/deleting/printing -inserting; notes -editing; notes -deleting;notes -Navigator;notes -printing;notes -records; inserting notes -remarks, see also notes + inserting; notes + editing; notes + deleting;notes + Navigator;notes + printing;notes + records; inserting notes + remarks, see also notes mw changed "notes;" and added 3 entries -Notes -Inserts a note anchored to the current cursor position. +Notes + Inserts a note anchored to the current cursor position. -
- -
+
+ +
Writer -Inserting notes -In Writer, the command Insert - Note or the Command+Option +Inserting notes + In Writer, the command Insert - Note or the Command+Option Ctrl+Alt+N key combination inserts a note anchor at the current cursor position. A note box is shown at the page margin, where you can enter the text of your note. A line connects anchor and note box. -The author name and the date and time of creating this note is shown at the bottom of the note box. -The notes by different authors get different colors. Choose Tools - Options - %PRODUCTNAME - User Data to enter your name so that it can show up as the note author. -Editing notes -Every user with write permission to the text document can edit and delete notes of all authors. -The note box contains an icon with a down arrow. Click the icon to open a menu with some commands to delete notes. + The author name and the date and time of creating this note is shown at the bottom of the note box. + The notes by different authors get different colors. Choose Tools - Options - %PRODUCTNAME - User Data to enter your name so that it can show up as the note author. + Editing notes + Every user with write permission to the text document can edit and delete notes of all authors. + The note box contains an icon with a down arrow. Click the icon to open a menu with some commands to delete notes. -Delete the current note. +Delete the current note. -Delete all notes by this author in the current document. +Delete all notes by this author in the current document. -Delete all notes in the current document. -Choose a command to delete the current note, or all notes from the same author as the current note, or all notes in the document.View - Notes command +Delete all notes in the current document. + Choose a command to delete the current note, or all notes from the same author as the current note, or all notes in the document.22500 shown for Reply, which is the same as Delete. +If the note was written by another author, there is a Reply command in the context menu. This command inserts a new note adjacent to the note to which you want to reply. The note anchor is the same for both notes. Type your reply text in the new note. Save and send your document to other authors, then those authors can add replies, too.View - Notes command -Use View - Notes to show or hide all notes. -Navigating from note to note -When the cursor is inside a note, you can press Command+Option -Ctrl+Alt+Page Down to jump to the next note, or press Command+Option +Use View - Notes to show or hide all notes. + In the Find & Replace dialog, you can select to include the notes texts in your searches. + Navigating from note to note + When the cursor is inside a note, you can press Command+Option +Ctrl+Alt+Page Down to jump to the next note, or press Command+Option Ctrl+Alt+Page Up to jump to the previous note. -When the cursor is inside the normal text, press the above mentioned keys to jump to the next or previous note anchor. You can also use the small Navigation window below the vertical scrollbar to jump from one note anchor to the next note anchor. -You can also open the Navigator to see a list of all notes. Right-click a note name in the Navigator to edit or delete the note. -Printing notes -To set the printing options for notes in your text document, choose File - Print, then click Options. To change the printing option for notes for all your text documents, choose Tools - Options - %PRODUCTNAME Writer - Print. + When the cursor is inside the normal text, press the above mentioned keys to jump to the next or previous note anchor. You can also use the small Navigation window below the vertical scrollbar to jump from one note anchor to the next note anchor. + You can also open the Navigator to see a list of all notes. Right-click a note name in the Navigator to edit or delete the note. + Printing notes + To set the printing options for notes in your text document, choose File - Print, then click Options. To change the printing option for notes for all your text documents, choose Tools - Options - %PRODUCTNAME Writer - Print. Calc -When you attach a note to a cell, a callout appears where you can enter your text. A small square in the upper right corner of a cell marks the position of a note. To display the note permanently, right-click the cell, and choose Show Note. -To change the object properties of a note, for example the background color, choose Show Note as above, then right-click the note (do not double-click the text). -To edit a shown note, double-click the note text. To edit a note that is not shown permanently, click in the cell that contains the note, and then choose Insert - Note. To specify the formatting of the note text, right-click the note text in edit mode. -To change the position or size of a note, drag a border or corner of the note. UFI: see specs.openoffice.org/calc/compatibility/AnnotationPosition.sxw -To delete a note, right-click the cell, then choose Delete Note. -You can also right-click a note name in the Navigator window to choose some editing commands. -To set the printing options for notes in your spreadsheet, choose Format - Page, and then click the Sheet tab. +When you attach a note to a cell, a callout appears where you can enter your text. A small square in the upper right corner of a cell marks the position of a note. To display the note permanently, right-click the cell, and choose Show Note. + To change the object properties of a note, for example the background color, choose Show Note as above, then right-click the note (do not double-click the text). + To edit a shown note, double-click the note text. To edit a note that is not shown permanently, click in the cell that contains the note, and then choose Insert - Note. To specify the formatting of the note text, right-click the note text in edit mode. + To change the position or size of a note, drag a border or corner of the note. UFI: see specs.openoffice.org/calc/compatibility/AnnotationPosition.sxw + To delete a note, right-click the cell, then choose Delete Note. + You can also right-click a note name in the Navigator window to choose some editing commands. + To set the printing options for notes in your spreadsheet, choose Format - Page, and then click the Sheet tab. Draw, Impress -In Draw, there are no notes. If you want some annotations, use a custom layer and set the layer to visible or invisible as desired. -In Impress, you can use the Notes view to write a page of notes for every slide. +In Draw, there are no notes. If you want some annotations, use a custom layer and set the layer to visible or invisible as desired. + In Impress, you can use the Notes view to write a page of notes for every slide. -Text edit box - are these still in use? -Enter the text for your note. -Author edit box -Enters your initials and the current date and time into the contents of the note. - + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/01/04150000.xhp b/helpcontent2/source/text/shared/01/04150000.xhp index ef435dc50e..b7a2021bae 100755 --- a/helpcontent2/source/text/shared/01/04150000.xhp +++ b/helpcontent2/source/text/shared/01/04150000.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Object -/text/shared/01/04150000.xhp - - - -
-Object -Inserts an object into your document. For movies and sounds, use Insert - Movie and Sound instead. -
-
- -
-OLE Object - -Sound - -Video -removed Insert Applet linkFormula - -Chart + + Drawing Object + /text/shared/01/04150000.xhp + + + +
+ +Drawing Object + Inserts an object into your document. For movies and sounds, use Insert - Movie and Sound instead. +
+
+ +
+ OLE Object + + Sound + + Video + removed Insert Applet link +Formula + + Chart - - + Inserts a chart. + + + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/01/05020200.xhp b/helpcontent2/source/text/shared/01/05020200.xhp index 3bafd19072..04573dcba0 100644 --- a/helpcontent2/source/text/shared/01/05020200.xhp +++ b/helpcontent2/source/text/shared/01/05020200.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Font Effects -/text/shared/01/05020200.xhp - - - -
+ + Font Effects + /text/shared/01/05020200.xhp + + + +
fonts;effects -formatting; font effects -characters; font effects -text; font effects -effects; fonts -underlining; text -capital letters; font effects -lowercase letters; font effects -titles; font effects -small capitals -strikethrough; font effects -fonts; strikethrough -outlines; font effects -fonts; outlines -shadows; characters -fonts; shadows -colors; fonts -fonts;colors + formatting; font effects + characters; font effects + text; font effects + effects; fonts + underlining; text + capital letters; font effects + lowercase letters; font effects + titles; font effects + small capitals + strikethrough; font effects + fonts; strikethrough + outlines; font effects + fonts; outlines + shadows; characters + fonts; shadows + colors; fonts + fonts;colors ufi inserted "fonts;colors" -Font Effects -Specify the font effects that you want to use. -
-
- -
- -Underlining -Select the underlining style that you want to apply. To apply the underlining to words only, select the Individual Words box. -If you apply underlining to a superscript text, the underlining is raised to the level of the superscript. If the superscript is contained in a word with normal text, the underlining is not raised. - - -Color -Select the color for the underlining. - + +Font Effects + Specify the font effects that you want to use. +
+
+ +
+ + + +Font Color + Sets the color for the selected text. If you select Automatic, the text color is set to black for light backgrounds and to white for dark backgrounds. + + + To change the color of a text selection, select the text that you want to change, and click the Font Color icon. To apply a different color, click the arrow next to the Font Color icon, and then select the color that you want to use. + + + If you click the Font Color icon before you select text, the paint can cursor appears. To change the color of text, select the text with the paint can cursor. To change the color of a single word, double-click in a word. To apply a different color, click the arrow next to the Font Color icon, and then select the color that you want to use. + + + To undo the last change, right-click. + + + To exit the paint can mode, click once, or press the Escape key. + + -Effects -Select the font effects that you want to apply. -Effects -The following capitalization effects are available: - - -Without - no effect is applied - - -Capitals - changes the selected lowercase characters to uppercase characters - - -Lowercase - changes the selected uppercase characters to lower characters - - -Title font - changes the first character of each selected word to an uppercase character - - -Small capitals - changes the selected lowercase characters to uppercase characters, and then reduces their size - - + +The text color is ignored when printing, if the Print black check box is selected in Tools - Options - %PRODUCTNAME Writer - Print. -Strikethrough -Select a strikethrough style for the selected text. -If you save your document in MS Word format, all of the strikethrough styles are converted to the single line style. -Individual words -Applies the selected effect only to words and ignores spaces. -Outlines -Displays the outline of the selected characters. This effect does not work with every font. -Shadows -Adds a shadow that casts below and to the right of the selected characters. +The text color is ignored on screen, if the Use automatic font color for screen display check box is selected in Tools - Options - %PRODUCTNAME - Accessibility. + + + + +Click to apply the current font color to the selected characters. You can also click here, and then drag a selection to change the text color. Click the arrow next to the icon to open the Font color toolbar. + + -blinking fonts -flashing fonts - - -Blinking -Makes the selected characters blink. You cannot change the blink frequency. -Hidden -Hides the selected characters. To display the hidden text, ensure that Non-printing Characters is selected in the View menu. You can also choose Tools - Options - %PRODUCTNAME Writer - Formatting Aids and select Hidden text. +Effects + Select the font effects that you want to apply. + Effects + The following capitalization effects are available: + + + Without - no effect is applied + + + Capitals - changes the selected lowercase characters to uppercase characters + + + Lowercase - changes the selected uppercase characters to lower characters + + + Title font - changes the first character of each selected word to an uppercase character + + + Small capitals - changes the selected lowercase characters to uppercase characters, and then reduces their size + + - - -Emphasis mark -Select a character to display over or below the entire length of the selected text. -Position -Specify where to display the emphasis marks. -Relief -Select a relief effect to apply to the selected text. The embossed relief makes the characters appear as if they are raised above the page. The engraved relief makes the characters appear as if they are pressed into the page. - -Font Color -Sets the color for the selected text. If you select Automatic, the text color is set to black for light backgrounds and to white for dark backgrounds. - - -To change the color of a text selection, select the text that you want to change, and click the Font Color icon. To apply a different color, click the arrow next to the Font Color icon, and then select the color that you want to use. - - -If you click the Font Color icon before you select text, the paint can cursor appears. To change the color of text, select the text with the paint can cursor. To change the color of a single word, double-click in a word. To apply a different color, click the arrow next to the Font Color icon, and then select the color that you want to use. - - -To undo the last change, right-click. - - -To exit the paint can mode, click once, or press the Escape key. - - + +Relief + Select a relief effect to apply to the selected text. The embossed relief makes the characters appear as if they are raised above the page. The engraved relief makes the characters appear as if they are pressed into the page. + +Outline + Displays the outline of the selected characters. This effect does not work with every font. + +Shadow + Adds a shadow that casts below and to the right of the selected characters. -The text color is ignored when printing, if the Print black check box is selected in Tools - Options - %PRODUCTNAME Writer - Print. + +blinking fonts + flashing fonts + + + +Blinking + Makes the selected characters blink. You cannot change the blink frequency. + +Hidden + Hides the selected characters. To display the hidden text, ensure that Non-printing Characters is selected in the View menu. You can also choose Tools - Options - %PRODUCTNAME Writer - Formatting Aids and select Hidden text. -The text color is ignored on screen, if the Use automatic font color for screen display check box is selected in Tools - Options - %PRODUCTNAME - Accessibility. - - - -Click to apply the current font color to the selected characters. You can also click here, and then drag a selection to change the text color. Click the arrow next to the icon to open the Font color toolbar. - -
- - -$[officename] color tables - -
- - + +Overlines or removes overlining from the selected text. If the cursor is not in a word, the new text that you enter is overlined. + +Overlining + Select the overlining style that you want to apply. To apply the overlining to words only, select the Individual Words box. + +Overline color + Select the color for the overlining. + +Strikethrough + Select a strikethrough style for the selected text. + If you save your document in MS Word format, all of the strikethrough styles are converted to the single line style. + +Underlining + Select the underlining style that you want to apply. To apply the underlining to words only, select the Individual Words box. + If you apply underlining to a superscript text, the underlining is raised to the level of the superscript. If the superscript is contained in a word with normal text, the underlining is not raised. + + + +Underline color + Select the color for the underlining. + +Individual words + Applies the selected effect only to words and ignores spaces. + + +Emphasis mark + Select a character to display over or below the entire length of the selected text. + +Position + Specify where to display the emphasis marks. + +
+ + + $[officename] color tables + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/01/05040100.xhp b/helpcontent2/source/text/shared/01/05040100.xhp index d6c4be1fe3..34656fcbd5 100644 --- a/helpcontent2/source/text/shared/01/05040100.xhp +++ b/helpcontent2/source/text/shared/01/05040100.xhp @@ -1,8 +1,8 @@ - - + + + - - -Organizer -/text/shared/01/05040100.xhp - - -Sun Microsystems, Inc. -UFI: spec "Assign Keyboard Shortcuts to Styles" -dedr: reviewed - - - -
+ + Organizer + /text/shared/01/05040100.xhp + + + +
organizing; styles -styles; organizing + styles; organizing -Organizer -Set the options for the selected style. -
-
- -
+Organizer + Set the options for the selected style. +
+
+ +
-Name -Displays the name of the selected style. If you are creating or modifying a custom style, enter a name for the style. You cannot change the name of a predefined style. +Name + Displays the name of the selected style. If you are creating or modifying a custom style, enter a name for the style. You cannot change the name of a predefined style. -AutoUpdate +AutoUpdate -Updates the style when you apply direct formatting to a paragraph using this style in your document. The formatting of all paragraphs using this style is automatically updated. + Updates the style when you apply direct formatting to a paragraph using this style in your document. The formatting of all paragraphs using this style is automatically updated. + Updates the style when you apply direct formatting to a paragraph using this style in your document. The formatting of all paragraphs using this style is automatically updated. -Next Style -Select an existing style that you want to follow the current style in your document. For paragraph styles, the next style is applied to the paragraph that is created when you press Enter. For page styles, the next style is applied when a new page is created. +Next Style + Select an existing style that you want to follow the current style in your document. For paragraph styles, the next style is applied to the paragraph that is created when you press Enter. For page styles, the next style is applied when a new page is created. -Linked with -Select an existing style that you want to base the new style on, or select none to define your own style. +Linked with + Select an existing style that you want to base the new style on, or select none to define your own style. -Category -Displays the category for the current style. If you are creating or modifying a new style, select 'Custom Style' from the list. -You cannot change the category for a predefined style. +Category + Displays the category for the current style. If you are creating or modifying a new style, select 'Custom Style' from the list. + You cannot change the category for a predefined style. -Contains -Describes the relevant formatting used in the current style. -Assign Shortcut Key -Opens the Tools - Customize - Keyboard tab page where you can assign a shortcut key to the current Style. -
-Update Style -
- - +Contains + Describes the relevant formatting used in the current style. + Assign Shortcut Key + Opens the Tools - Customize - Keyboard tab page where you can assign a shortcut key to the current Style. +
+ Update Style +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/01/05110600m.xhp b/helpcontent2/source/text/shared/01/05110600m.xhp index 5846a241ac..4b2dca7e7c 100644 --- a/helpcontent2/source/text/shared/01/05110600m.xhp +++ b/helpcontent2/source/text/shared/01/05110600m.xhp @@ -61,7 +61,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon diff --git a/helpcontent2/source/text/shared/01/05120600.xhp b/helpcontent2/source/text/shared/01/05120600.xhp index a7d0233c12..326f78dfff 100644 --- a/helpcontent2/source/text/shared/01/05120600.xhp +++ b/helpcontent2/source/text/shared/01/05120600.xhp @@ -61,7 +61,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon diff --git a/helpcontent2/source/text/shared/01/06040100.xhp b/helpcontent2/source/text/shared/01/06040100.xhp index 00059a9cc2..f2fb333c30 100644 --- a/helpcontent2/source/text/shared/01/06040100.xhp +++ b/helpcontent2/source/text/shared/01/06040100.xhp @@ -11,7 +11,7 @@ * OpenOffice.org - a multi-platform office productivity suite * * $RCSfile: soffice2xmlhelp.xsl,v $ - * $Revision: 1.8 $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,252 +35,269 @@ - -Options -/text/shared/01/06040100.xhp - - - -
+ + Options + /text/shared/01/06040100.xhp + + + +
AutoCorrect function; options -replacement options -words; automatically replacing -abbreviation replacement -capital letters; AutoCorrect function -bold; AutoFormat function -underlining; AutoFormat function -1/2 replacement -spaces; ignoring double -numbering; using automatically -paragraphs; numbering automatically -numbering;paragraphs -tables in text; creating automatically -titles; formatting automatically -empty paragraph removal -paragraphs; removing blank ones -styles; replacing automatically -user-defined styles; automatically replacing -bullets; replacing -quotation marks; replacing -typographical quotes in $[officename] Writer -paragraphs; joining -joining; paragraphs -removed two bookmarks "automatic..." + replacement options + words; automatically replacing + abbreviation replacement + capital letters; AutoCorrect function + bold; AutoFormat function + underlining; AutoFormat function + 1/2 replacement + spaces; ignoring double + numbering; using automatically + paragraphs; numbering automatically + tables in text; creating automatically + titles; formatting automatically + empty paragraph removal + paragraphs; removing blank ones + styles; replacing automatically + user-defined styles; automatically replacing + bullets; replacing + quotation marks; replacing + typographical quotes in $[officename] Writer + paragraphs; joining + joining; paragraphs +removed two bookmarks "automatic..."MW removed "numbering;paragraphs" -Options -Select the options for automatically correcting errors as you type, and then click OK. -
-
- -
+Options + Select the options for automatically correcting errors as you type, and then click OK. +
+
+ +
-In text documents, you can choose to apply the AutoCorrect corrections while you type [T], or only when you modify existing text [M] with Format - AutoCorrect - Apply. -When you choose to modify existing text with all options deselected, still all "Default" paragraph styles will be converted to "Text body" styles. see i72339Don't use inline switches for notes, tips and warnings. The icon will still show up. +In text documents, you can choose to apply the AutoCorrect corrections while you type [T], or only when you modify existing text [M] with Format - AutoCorrect - Apply. + When you choose to modify existing text with all options deselected, still all "Default" paragraph styles will be converted to "Text body" styles. see i72339Don't use inline switches for notes, tips and warnings. The icon will still show up. -Use replacement table -If you type a letter combination that matches a shortcut in the replacement table, the letter combination is replaced with the replacement text. -Correct TWo INitial CApitals -If you type two uppercase letters at the beginning of a "WOrd", the second uppercase letter is automatically replaced with a lowercase letter. -Capitalize first letter of every sentence. -Capitalizes the first letter of every sentence. +Use replacement table + If you type a letter combination that matches a shortcut in the replacement table, the letter combination is replaced with the replacement text. + Correct TWo INitial CApitals + If you type two uppercase letters at the beginning of a "WOrd", the second uppercase letter is automatically replaced with a lowercase letter. + Capitalize first letter of every sentence. + Capitalizes the first letter of every sentence. -The first letter in a Calc cell will never be capitalized automatically.see i78661 +The first letter in a Calc cell will never be capitalized automatically.see i78661 -Automatic *bold* and _underline_ -Automatically applies bold formatting to text enclosed by asterisks (*), and underline to text enclosed by underscores ( _ ), for example, *bold*. The asterisks and underscores are not displayed after the formatting is applied. -This feature does not work if the formatting characters * or _ are entered with an Input Method Editor. -URL Recognition -Automatically creates a hyperlink when you type a URL. -Replace 1/2 ... with ½ ... -Replaces 1/2, 1/4, 3/4 with the corresponding fraction characters. -Replace 1st ... with 1^st ... -Displays the text characters of ordinals, such as 1st, 2nd, or 3rd, as superscripts. -Replace DashesUFI: changed switches, added table, #61325#UFI: see i73558 for name: not the dashes are replaced but the hyphens (or even better the minus signs) -Replaces one or two hyphens with a long dash (see the following table). -Text will be replaced after you type a trailing white space (space, tab, or return). In the following table, the A and B represent text consisting of letters A to z or digits 0 to 9. - - - -Text that you type: - - -Result that you get: - - - - -A - B (A, space, minus, space, B) - - -A – B (A, space, en-dash, space, B) - - - - -A -- B (A, space, minus, minus, space, B) - - -A – B (A, space, en-dash, space, B) - - - - -A--B (A, minus, minus, B) - - -A—B (A, em-dash, B)
(see note below the table) - - - - -A-B (A, minus, B) - - -A-B (unchanged) - - - - -A -B (A, space, minus, B) - - -A -B (unchanged) - - - - -A --B (A, space, minus, minus, B) - - -A –B (A, space, en-dash, B) - - -
+Automatic *bold* and _underline_ + Automatically applies bold formatting to text enclosed by asterisks (*), and underline to text enclosed by underscores ( _ ), for example, *bold*. The asterisks and underscores are not displayed after the formatting is applied. + This feature does not work if the formatting characters * or _ are entered with an Input Method Editor. + URL Recognition + Automatically creates a hyperlink when you type a URL. + Replace 1/2 ... with ½ ... + Replaces 1/2, 1/4, 3/4 with the corresponding fraction characters. + Replace 1st ... with 1^st ... + Displays the text characters of ordinals, such as 1st, 2nd, or 3rd, as superscripts. + Replace DashesUFI: changed switches, added table, #61325#UFI: see i73558 for name: not the dashes are replaced but the hyphens (or even better the minus signs) +Replaces one or two hyphens with a long dash (see the following table). + Text will be replaced after you type a trailing white space (space, tab, or return). In the following table, the A and B represent text consisting of letters A to z or digits 0 to 9. + + + + Text that you type: + + + Result that you get: + + + + + A - B (A, space, minus, space, B) + + + A – B (A, space, en-dash, space, B) + + + + + A -- B (A, space, minus, minus, space, B) + + + A – B (A, space, en-dash, space, B) + + + + + A--B (A, minus, minus, B) + + + A—B (A, em-dash, B)
(see note below the table) + + + + + A-B (A, minus, B) + + + A-B (unchanged) + + + + + A -B (A, space, minus, B) + + + A -B (unchanged) + + + + + A --B (A, space, minus, minus, B) + + + A –B (A, space, en-dash, B) + + +
-If the text has the Hungarian or Finnish language attribute, then two hyphens in the sequence A--B are replaced by an en-dash instead of an em-dash.i71908 -Delete spaces and tabs at beginning and end of paragraph + If the text has the Hungarian or Finnish language attribute, then two hyphens in the sequence A--B are replaced by an en-dash instead of an em-dash.i71908 + Delete spaces and tabs at beginning and end of paragraph -Removes spaces and tabs at the beginning of a paragraph. To use this option, the Apply Styles option must also be selected. + Removes spaces and tabs at the beginning of a paragraph. To use this option, the Apply Styles option must also be selected. -Delete blanks and tabs at end and start of lines + Delete blanks and tabs at end and start of lines -Removes spaces and tabs at the beginning of each line. To use this option, the Apply Styles option must also be selected. + Removes spaces and tabs at the beginning of each line. To use this option, the Apply Styles option must also be selected. -Ignore double spaces -Replaces two or more consecutive spaces with a single space. -Apply numbering - symbol + Ignore double spaces + Replaces two or more consecutive spaces with a single space. + Apply numbering - symbol -Automatically creates a numbered list when you press Enter at the end of a line that starts with a number followed by a period, a space, and text. If a line starts with a hyphen (-), a plus sign (+), or an asterisk (*), followed by a space, and text, a bulleted list is created when you press Enter. + Automatically creates a numbered list when you press Enter at the end of a line that starts with a number followed by a period, a space, and text. If a line starts with a hyphen (-), a plus sign (+), or an asterisk (*), followed by a space, and text, a bulleted list is created when you press Enter. -To cancel automatic numbering when you press Enter at the end of a line that starts with a numbering symbol, press Enter again. + To cancel automatic numbering when you press Enter at the end of a line that starts with a numbering symbol, press Enter again. -The automatic numbering option is only applied to paragraphs that are formatted with the "Default", "Text body", or "Text body indent" paragraph style. +The automatic numbering option is only applied to paragraphs that are formatted with the "Default", "Text body", or "Text body indent" paragraph style. -Apply border -Automatically applies a border at the base of the preceding paragraph when you type three or more specific characters, and then press Enter. To create a single line, type three or more hyphens (-), or underscores ( _ ), and then press Enter. To create a double line, type three or more equal signs (=), asterisks (*), tildes (~), or hash marks (#), and then press Enter. -To delete the created line, click the paragraph above the line, choose Format - Paragraph - Borders, delete the bottom border. -The following table summarizes the line thickness for the different characters: - - - ---- - - -0.5pt single underline - - - - -___ - - -1.0pt single underline - - - - -=== - - -1.1pt double underline - - - - -*** - - -4.5pt double underline - - - - -~~~ - - -6.0pt double underline - - - - -### - - -9.0pt double underline - - -
- - +Apply border + Automatically applies a border at the base of the preceding paragraph when you type three or more specific characters, and then press Enter. To create a single line, type three or more hyphens (-), or underscores ( _ ), and then press Enter. To create a double line, type three or more equal signs (=), asterisks (*), tildes (~), or hash marks (#), and then press Enter. + To delete the created line, click the paragraph above the line, choose Format - Paragraph - Borders, delete the bottom border. + The following table summarizes the line thickness for the different characters: + + + + --- + + + 0.5pt single underline + + + + + ___ + + + 1.0pt single underline + + + + + === + + + 1.1pt double underline + + + + + *** + + + 4.5pt double underline + + + + + ~~~ + + + 6.0pt double underline + + + + + ### + + + 9.0pt double underline + + +
+ + -Create table +Create table -Creates a table when you press Enter after typing a series of hyphens (-) or tabs separated by plus signs, that is, +------+---+. Plus signs indicate column dividers, while hyphens and tabs indicate the width of a column. + Creates a table when you press Enter after typing a series of hyphens (-) or tabs separated by plus signs, that is, +------+---+. Plus signs indicate column dividers, while hyphens and tabs indicate the width of a column. -+-----------------+---------------+------+ + +-----------------+---------------+------+ -Apply Styles + Apply Styles -Automatically replaces the "Default" paragraph style with the Heading 1 to Heading 8 paragraph styles. To apply the Heading 1 paragraph style, type the text that you want to use as a heading (without a period), and then press Enter twice. To apply a sub-heading, press Tab one or more times, type the text (without a period), and then press Enter. + Automatically replaces the "Default" paragraph style with the Heading 1 to Heading 8 paragraph styles. To apply the Heading 1 paragraph style, type the text that you want to use as a heading (without a period), and then press Enter twice. To apply a sub-heading, press Tab one or more times, type the text (without a period), and then press Enter. -Remove blank paragraphs + Remove blank paragraphs UFI: test if this also only applies to Default, body and body indented, or to all para styles -Removes empty paragraphs from the current document when you choose Format - AutoCorrect - Apply. +Removes empty paragraphs from the current document when you choose Format - AutoCorrect - Apply. -Replace Custom Styles + Replace Custom Styles -Replaces the custom paragraph styles in the current document with the "Default", the "Text Body", or the "Text Body Indent" paragraph style. + Replaces the custom paragraph styles in the current document with the "Default", the "Text Body", or the "Text Body Indent" paragraph style. -Replace bullets with + Replace bullets with -Converts paragraphs that start with a hyphen (-), a plus sign (+), or an asterisk (*) directly followed by a space or a tab, to bulleted lists. This option only works on paragraphs that are formatted with the "Default", "Text Body", or "Text Body Indent" paragraph styles. To change the bullet style that is used, select this option, and then click Edit. + Converts paragraphs that start with a hyphen (-), a plus sign (+), or an asterisk (*) directly followed by a space or a tab, to bulleted lists. This option only works on paragraphs that are formatted with the "Default", "Text Body", or "Text Body Indent" paragraph styles. To change the bullet style that is used, select this option, and then click Edit. -Replace standard quotes with custom quotes + Replace standard quotes with custom quotes -Changes quotation marks in the text to the quotation marks that you specify in the Custom Quotes tab of this dialog. + Changes quotation marks in the text to the quotation marks that you specify in the Custom Quotes tab of this dialog. -Combine single line paragraphs if length greater than ... + Combine single line paragraphs if length greater than ... -Combines consecutive single-line paragraphs into a single paragraph. This option only works on paragraphs that use the "Default" paragraph style. If a paragraph is longer than the specified length value, the paragraph is combined with the next paragraph. To enter a different length value, select the option, and then click Edit. + Combines consecutive single-line paragraphs into a single paragraph. This option only works on paragraphs that use the "Default" paragraph style. If a paragraph is longer than the specified length value, the paragraph is combined with the next paragraph. To enter a different length value, select the option, and then click Edit. -Edit +Edit -Modifies the selected AutoCorrect option. + Modifies the selected AutoCorrect option. - - + + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/01/06050100.xhp b/helpcontent2/source/text/shared/01/06050100.xhp index 8f757e2af4..585459e531 100755 --- a/helpcontent2/source/text/shared/01/06050100.xhp +++ b/helpcontent2/source/text/shared/01/06050100.xhp @@ -1,7 +1,8 @@ - - - + ************************************************************************ + --> + - - -Bullets -/text/shared/01/06050100.xhp - - -Sun Microsystems, Inc. -converted from old format - fpe - - - -
+ + Bullets + /text/shared/01/06050100.xhp + + + +
bullets;paragraphs -paragraphs; inserting bullets -inserting; paragraph bullets + paragraphs; inserting bullets + inserting; paragraph bullets -Bullets -Displays the different bullet styles that you can apply. -
-
- -
+Bullets + Displays the different bullet styles that you can apply. + Bullets and Numbering of paragraphs is supported only in Writer, Impress and Draw. +
+
+ +
-Selection -Click the bullet style that you want to use. -
-Position tab (Bullets and Numbering dialog) +Selection + Click the bullet style that you want to use. +
+ Position tab (Bullets and Numbering dialog) -Indents & Spacing tab (Bullets and Numbering dialog) +Indents & Spacing tab (Bullets and Numbering dialog) -Options tab (Bullets and Numbering dialog) -
- - +Options tab (Bullets and Numbering dialog) +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/01/08060100.xhp b/helpcontent2/source/text/shared/01/08060100.xhp index 87f86a8bf8..e097062654 100644 --- a/helpcontent2/source/text/shared/01/08060100.xhp +++ b/helpcontent2/source/text/shared/01/08060100.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 08060100.xhp,v $ - * $Revision: 1.7.4.1 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,39 +35,43 @@ - -Registration -/text/shared/01/08060100.xhp - - - - -
+ + Registration + /text/shared/01/08060100.xhp + + + + +
online registration -registering; %PRODUCTNAME + registering; %PRODUCTNAME -Registration -Connects to the $[officename] Web site where you can register your copy of $[officename]. -
-
- -
-Registration Dialog -The Registration dialog appears after you install $[officename]. -Register Now +Registration + Connects to the $[officename] Web site where you can register your copy of $[officename]. +
+
+ +
+ Registration Dialog + The Registration dialog appears after you install $[officename]. + I want to register now -Launches your default Web browser and connects to the $[officename] Web site where you can register your copy of $[officename]. -Remind me to register later +Launches your default Web browser and connects to the $[officename] Web site where you can register your copy of $[officename]. + I want to register later -Hides the Registration dialog for the next seven days. -Never register +Hides the Registration dialog for the next seven days. + I do not want to register -Permanently hides the Registration dialog. To register at a later time, choose Help - Registration. - - +Permanently hides the Registration dialog. To register at a later time, choose Help - Registration. + + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/01/formatting_mark.xhp b/helpcontent2/source/text/shared/01/formatting_mark.xhp index c39e62b982..e8f1074c1b 100755 --- a/helpcontent2/source/text/shared/01/formatting_mark.xhp +++ b/helpcontent2/source/text/shared/01/formatting_mark.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Formatting Mark -text/shared/01/formatting_mark.xhp - - - - - -
- - + + Formatting Mark + + + + +
- CTL;(not) wrapping words -words;wrapping in CTL - - MW added 2 index entries because of issue 86750 - Formatting Mark + words;wrapping in CTL +MW added 2 index entries because of issue 86750tried to fix i86464 by creating a new file, copy everything over, then save & overwrite as formatting_mark.xhp +Formatting Mark - Opens a submenu to insert special formatting marks. - -
- + Opens a submenu to insert special formatting marks. Enable CTL for more commands. +
- Non-breaking space - Inserts a space that will keep bordering characters together on line breaks. - +Non-breaking space + Inserts a space that will keep bordering characters together on line breaks. - Non-breaking hyphen - Inserts a hyphen that will keep bordering characters together on line breaks. - +Non-breaking hyphen + Inserts a hyphen that will keep bordering characters together on line breaks. - Optional hyphen - Inserts an invisible hyphen within a word that will appear and create a line break once it becomes the last character in a line. - +Optional hyphen + Inserts an invisible hyphen within a word that will appear and create a line break once it becomes the last character in a line. - No-width optional break - Inserts an invisible space within a word that will insert a line break once it becomes the last character in a line. Available when complex text layout (CTL) is enabled. - +No-width optional break + Inserts an invisible space within a word that will insert a line break once it becomes the last character in a line. Available when complex text layout (CTL) is enabled. - No-width no break - Inserts an invisible space within a word that will keep the word together at the end of a line. Available when complex text layout (CTL) is enabled. - +No-width no break + Inserts an invisible space within a word that will keep the word together at the end of a line. Available when complex text layout (CTL) is enabled. - Left-to-right mark - Inserts a text direction mark that affects the text direction of any text following the mark. Available when complex text layout (CTL) is enabled. - +Left-to-right mark + Inserts a text direction mark that affects the text direction of any text following the mark. Available when complex text layout (CTL) is enabled. - Right-to-left mark - Inserts a text direction mark that affects the text direction of any text following the mark. Available when complex text layout (CTL) is enabled. - - +Right-to-left mark + Inserts a text direction mark that affects the text direction of any text following the mark. Available when complex text layout (CTL) is enabled. + + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/01/makefile.mk b/helpcontent2/source/text/shared/01/makefile.mk index 684ee2a8a4..fd665cd49b 100644 --- a/helpcontent2/source/text/shared/01/makefile.mk +++ b/helpcontent2/source/text/shared/01/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.21.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/shared/01/mediaplayer.xhp b/helpcontent2/source/text/shared/01/mediaplayer.xhp index 84f4d1fee2..96bbda6e87 100755 --- a/helpcontent2/source/text/shared/01/mediaplayer.xhp +++ b/helpcontent2/source/text/shared/01/mediaplayer.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Media Player -/text/shared/01/mediaplayer.xhp - - - -
+ + Media Player + /text/shared/01/mediaplayer.xhp + + + +
Media Player window -Media Player + +Media Player -Opens the Media Player window where you can preview movie and sound files as well as insert these files into the current document. -
-
- -
-The Media Player supports many different media formats. You can also insert media files from the Media Player into your document.UFI: add a list of keyboard shortcuts to /04/ file when available + Opens the Media Player window where you can preview movie and sound files as well as insert these files into the current document. +
+
+ +
+ The Media Player supports many different media formats. You can also insert media files from the Media Player into your document.UFI: add a list of keyboard shortcuts to /04/ file when available -On UNIX systems, the Media Player requires the Java Media Framework API (JMF). Download and install the JMF files, and add the path to the installed jmf.jar to the class path in Tools - Options - %PRODUCTNAME - Java. + +On Linux or Solaris systems, the Media Player requires the Java Media Framework API (JMF). Download and install the JMF files from http://java.sun.com/javase/technologies/desktop/media/jmf/index.jsp and add the path to the installed jmf.jar to the class path in Tools - Options - %PRODUCTNAME - Java. -On Windows systems, the Media Player uses DirectShow, which should be installed on your system by default. + +On Windows systems, the Media Player uses DirectShow, which should be installed on your system by default. -Open -Opens a movie file or a sound file that you want to preview. -Applyspec says "Insert" -Inserts the current movie file or sound file as a media object into the current document. -Only a link to the media file is inserted into the current document. -Play -Plays the current file. -Pause -Pauses or resumes the playback of the current file. -Stop -Stops the playback of the current file. -Repeat -Plays the file repeatedly. -Mute -Turns sound off and on. -Volume slider -Adjusts the volume. -Zoom -Adjusts the size of the movie playback. -Position slider -Moves to a different position in the file. -
- -
- - +Open + Opens a movie file or a sound file that you want to preview. + Apply + Inserts the current movie file or sound file as a media object into the current document. + Play + Plays the current file. + Pause + Pauses or resumes the playback of the current file. + Stop + Stops the playback of the current file. + Repeat + Plays the file repeatedly. + Mute + Turns sound off and on. + Volume slider + Adjusts the volume. + Zoom + Adjusts the size of the movie playback. + Position slider + Moves to a different position in the file. +
+ +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/01/moviesound.xhp b/helpcontent2/source/text/shared/01/moviesound.xhp index 1f54227221..323b21b5db 100755 --- a/helpcontent2/source/text/shared/01/moviesound.xhp +++ b/helpcontent2/source/text/shared/01/moviesound.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Movie and Sound -/text/shared/01/moviesound.xhp - - - -
+ + Movie and Sound + /text/shared/01/moviesound.xhp + + + +
inserting;movies/sounds -sounds;inserting and playing -playing movies and sound files -videos -audio; inserting -music;inserting -UFI: added "music;inserting" + sound files + playing movies and sound files + videos + movies + audio + music +UFI: added "music;inserting"MW made "sounds;", "audio;", "music;" one level entries and added "movies" -Movie and Sound + +Movie and Sound -Inserts a video or sound file into your document. -
-
- -
-To insert a movie or sound file into your document - - -Click where you want to insert the file. - - -Choose Insert - Movie and Sound. - - -In the File Open dialog, select the file that you want to insert. -The file types that are listed in this dialog are not supported by all operating systems. - - -Click Open. - - -To play a movie or sound file in an Impress presentation - - -Open the slide that contains the movie or sound file. - - -Click the object icon for the movie or sound file on the slide. - - -Click Play on the Media Playback toolbar. - - -To play a movie or sound file in a Writer, Calc, or Draw document - - -Open the document that contains the movie or sound file. - - -Click Play on the Media Playback toolbar. - - -You can also use the Media Playback Bar to pause, to stop, to loop, as well as to adjust the volume or to mute the playback of the file. The current playback position in the file is indicated on the left slider. Use the right slider to adjust the playback volume. For movie files, the bar also contains a list box where you can select the zoom factor for the playback. -
- -
- - + Inserts a video or sound file into your document. +
+
+ +
+ To insert a movie or sound file into your document + + + Click where you want to insert the file. + + + Choose Insert - Movie and Sound. + + + In the File Open dialog, select the file that you want to insert. + The file types that are listed in this dialog are not supported by all operating systems. + + + Click Open. + + + Alternatively, you can choose Tools - Media Player to open the Media Player. Use the Media Player to preview all supported media files. Click the Apply button in the Media Player window to insert the current media file into your document. + To play a movie or sound file + + + Click the object icon for the movie or sound file in your document. + If the icon is arranged on the background, hold down Ctrl while you click. + The Media Playback toolbar is shown. + + + Click Play on the Media Playback toolbar. + + + When you show an Impress presentation, the embedded sound or video on the current slide plays automatically until it's over or until you leave the slide. + You can also use the Media Playback Bar to pause, to stop, to loop, as well as to adjust the volume or to mute the playback of the file. The current playback position in the file is indicated on the left slider. Use the right slider to adjust the playback volume. For movie files, the bar also contains a list box where you can select the zoom factor for the playback. +
+ +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/01/online_update.xhp b/helpcontent2/source/text/shared/01/online_update.xhp index f0c527c6ea..16f167c6dd 100644 --- a/helpcontent2/source/text/shared/01/online_update.xhp +++ b/helpcontent2/source/text/shared/01/online_update.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Check for Updates -/text/shared/01/online_update.xhp - - - + + Check for Updates + /text/shared/01/online_update.xhp + + + updates;checking manually -online updates;checking manually + online updates;checking manually -Check for Updates -UFI: changed name of page, see i76016 -You can check for updates manually or automatically. -Checking for updates will also look for updates of all installed extensions. -Choose Help - Check for Updates to check manually. -You can disable or enable the automatic check in Tools - Options - %PRODUCTNAME - Online Update. - - -If an update is available, an icon -Icon +Check for Updates +UFI: changed name of page, see i76016Next time start download automatically + +Mark to enable the automatic check for updates. Choose Tools - Options - %PRODUCTNAME - Online Update to disable or enable this feature. + +Click to select a folder to download the files. + +You can check for updates manually or automatically. + Checking for updates will also look for updates of all installed extensions. + Choose Help - Check for Updates to check manually. + You can disable or enable the automatic check in Tools - Options - %PRODUCTNAME - Online Update. + + + If an update is available, an icon +Icon on the menu bar will notify you of the update. Click the icon to open a dialog with more information. - - -You will see the Check for Updates dialog with some information about the online update of %PRODUCTNAME. - - -Enable an Internet connection for %PRODUCTNAME. -If you need a proxy server, enter the proxy settings in Tools - Options - Internet - Proxy. - - -Choose Check for Updates to check for the availability of a newer version of your office suite. - - -If a newer version is available and %PRODUCTNAME is not set up for automatic downloading, then you can select any of the following actions: - - -Download the new version. - - -Install the downloaded files. - - -Abort this check for updates for now. - - -If %PRODUCTNAME is configured to download the files automatically, the download starts immediately. A download continues even when you minimize the dialog. -For StarOffice, automatic downloads are currently disabled. Start the download manually. -If no update was found, you can close the dialog. -You need Administrator rights to update %PRODUCTNAME.Next time start download automatically -Mark to enable the automatic check for updates. Choose Tools - Options - %PRODUCTNAME - Online Update to disable or enable this feature. - - + + + You will see the Check for Updates dialog with some information about the online update of %PRODUCTNAME. + + + Enable an Internet connection for %PRODUCTNAME. + If you need a proxy server, enter the proxy settings in Tools - Options - Internet - Proxy. + + + Choose Check for Updates to check for the availability of a newer version of your office suite. + + + If a newer version is available and %PRODUCTNAME is not set up for automatic downloading, then you can select any of the following actions: + + + Download the new version. + + + Install the downloaded files. + + + Abort this check for updates for now. + + + If %PRODUCTNAME is configured to download the files automatically, the download starts immediately. A download continues even when you minimize the dialog. + For StarOffice, automatic downloads are currently disabled. Start the download manually. + If no update was found, you can close the dialog. + You need Administrator rights to update %PRODUCTNAME. + + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/01/xformsdata.xhp b/helpcontent2/source/text/shared/01/xformsdata.xhp index 507976dfa6..75e8b2e76f 100644 --- a/helpcontent2/source/text/shared/01/xformsdata.xhp +++ b/helpcontent2/source/text/shared/01/xformsdata.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: xformsdata.xhp,v $ - * $Revision: 1.15.4.1 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,77 +35,81 @@ - -Data Navigator -/text/shared/01/xformsdata.xhp - - - -
+ + Data Navigator + /text/shared/01/xformsdata.xhp + + + +
data structure of XForms -deleting;models/instances -models in XForms -Data Navigator;display options + deleting;models/instances + models in XForms + Data Navigator;display options MW made "Data Navigator.." a two level entry -Data Navigator + + +Data Navigator -Specifies the data structure of the current XForms document. -
+ Specifies the data structure of the current XForms document. +
-Model name -Selects the XForms model that you want to use. +Model name + Selects the XForms model that you want to use. -Models -Adds, renames, and removes XForms models. +Models + Adds, renames, and removes XForms models. -Add -Opens the Add Model dialog where you can add an XForm model. +Add + Opens the Add Model dialog where you can add an XForm model. + +Enter the name. -Model data updates change document's modification status -When enabled, the document status will be set to "modified" when you change any form control that is bound to any data in the model. When not enabled, such a change does not set the document status to "modified". +Model data updates change document's modification status + When enabled, the document status will be set to "modified" when you change any form control that is bound to any data in the model. When not enabled, such a change does not set the document status to "modified". -Remove -Deletes the selected XForm model. You cannot delete the last model. +Remove + Deletes the selected XForm model. You cannot delete the last model. -Rename -Renames the selected Xform model. +Rename + Renames the selected Xform model. -Show Details -Switches the display to show or hide details.UFI: not explained in spec +Show Details + Switches the display to show or hide details.UFI: not explained in spec -Instance -Lists the items that belong to the current instance. +Instance + Lists the items that belong to the current instance. -Submissions -Lists the submissions.UFI. it's not in the spec -Bindings -Lists the bindings for the XForm.UFI. it's not in the spec +Submissions + Lists the submissions.UFI. it's not in the spec + Bindings + Lists the bindings for the XForm.UFI. it's not in the spec -Instances -This button has submenus to add, edit or remove instances. +Instances + This button has submenus to add, edit or remove instances. -Add -Opens a dialog where you can add a new instance. +Add + Opens a dialog where you can add a new instance. -Edit -Opens a dialog where you can modify the current instance. +Edit + Opens a dialog where you can modify the current instance. -Remove -Deletes the current instance. You cannot delete the last instance. -Show data types -Switches the display to show more or less details.UFI: not explained in spec +Remove + Deletes the current instance. You cannot delete the last instance. + Show data types + Switches the display to show more or less details.UFI: not explained in spec -Add -Opens a dialog to add a new item (element, attribute, submission, or binding) as a sub-item of the current item. +Add + Opens a dialog to add a new item (element, attribute, submission, or binding) as a sub-item of the current item. -Edit -Opens a dialog to edit the selected item (element, attribute, submission, or binding). +Edit + Opens a dialog to edit the selected item (element, attribute, submission, or binding). -Delete -Deletes the selected item (element, attribute, submission, or binding). - - +Delete + Deletes the selected item (element, attribute, submission, or binding). + + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/02/01170000.xhp b/helpcontent2/source/text/shared/02/01170000.xhp index 12c4979e14..0932ade91b 100644 --- a/helpcontent2/source/text/shared/02/01170000.xhp +++ b/helpcontent2/source/text/shared/02/01170000.xhp @@ -75,7 +75,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -120,7 +120,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -143,7 +143,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -161,7 +161,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -179,7 +179,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -198,7 +198,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -217,7 +217,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -236,7 +236,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -254,7 +254,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -272,7 +272,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -296,7 +296,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -319,7 +319,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -338,7 +338,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -442,7 +442,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -460,7 +460,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -479,7 +479,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -500,7 +500,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -519,7 +519,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -537,7 +537,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -555,7 +555,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -573,7 +573,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -592,7 +592,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -615,7 +615,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -634,7 +634,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -658,7 +658,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon diff --git a/helpcontent2/source/text/shared/02/02010000.xhp b/helpcontent2/source/text/shared/02/02010000.xhp index 817d01798b..0ee4ae2262 100644 --- a/helpcontent2/source/text/shared/02/02010000.xhp +++ b/helpcontent2/source/text/shared/02/02010000.xhp @@ -1,7 +1,8 @@ - - - + ************************************************************************ + --> + - - -Apply Style -/text/shared/02/02010000.xhp - - -Sun Microsystems, Inc. -UFI fix to #i21144# - FPE: added missing section -DEDR: Reviewed - - - + + Apply Style + /text/shared/02/02010000.xhp + + + - +
-Apply Style -
-Assigns a style to the current paragraph, selected paragraphs, or to a selected object. -
-
-To reset the selected objects to the default paragraph style , select Clear formatting. Select More to open the Styles and Formatting window. -
- - - - -Cell Styles + Apply Style +
+ Assigns a style to the current paragraph, selected paragraphs, or to a selected object. +
+ + To reset the selected objects to the default paragraph style, select Clear formatting. Select More to open the Styles and Formatting window. +
+
+ + + +Apply Style - - -Apply Style - - -
-
- - + + + Apply Style + + + + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/02/02020000.xhp b/helpcontent2/source/text/shared/02/02020000.xhp index 76100b9eaf..c798dee171 100644 --- a/helpcontent2/source/text/shared/02/02020000.xhp +++ b/helpcontent2/source/text/shared/02/02020000.xhp @@ -1,7 +1,8 @@ - - - - - + ************************************************************************ + --> + - - -Font Name -/text/shared/02/02020000.xhp - - -Sun Microsystems, Inc. -converted from old format - fpe - - - -
+ + Font Name + /text/shared/02/02020000.xhp + + + +
fonts; specifying several -alternative fonts -characters; alternative fonts + alternative fonts + characters; alternative fonts - + -Font Name -Allows you to select a font name from the list or enter a font name directly. +Font Name + Allows you to select a font name from the list or enter a font name directly. -You can enter several fonts, separated by semicolons. $[officename] uses each named font in succession if the previous fonts are not available. -
-Any font changes apply to the selected text or word in which the cursor is positioned. If no text has been selected, the font applies to text typed afterwards. -The last five font names that have been selected are shown in the top part of the combo box, if you have marked the Font history field in Tools - Options - $[officename] - View. As soon as you close your document, the normal alphabetic numbering of the installed fonts will be recreated. -
- - - - -Icon + You can enter several fonts, separated by semicolons. $[officename] uses each named font in succession if the previous fonts are not available. + + Any font changes apply to the selected text or word in which the cursor is positioned. If no text has been selected, the font applies to text typed afterwards. + The last five font names that have been selected are shown in the top part of the combo box, if you have marked the Font history field in Tools - Options - $[officename] - View. As soon as you close your document, the normal alphabetic numbering of the installed fonts will be recreated. +
+
+ + + +Icon - - -Font Name - - -
+ + + Font Name + + + -
-In $[officename] you see the available fonts only if a printer is installed as the default printer in your system. With the spadmin program you can define a printer as the default printer. +
+ In $[officename] you see the available fonts only if a printer is installed as the default printer in your system. With the spadmin program you can define a printer as the default printer. In order to install a printer as the default printer please refer to your operating system documentation. -You can see the name of the fonts formatted in their respective font if you mark the Preview in fonts lists field in Tools - Options - $[officename] - View. + You can see the name of the fonts formatted in their respective font if you mark the Preview in fonts lists field in Tools - Options - $[officename] - View. -If you receive an error message that states that certain fonts have not been found, you can install them with $[officename] Setup in the Repair mode if it is a $[officename] font. +If you receive an error message that states that certain fonts have not been found, you can install them with $[officename] Setup in the Repair mode if it is a $[officename] font. - + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/02/02140000.xhp b/helpcontent2/source/text/shared/02/02140000.xhp index 18f60c0ecb..6e58a86a2b 100644 --- a/helpcontent2/source/text/shared/02/02140000.xhp +++ b/helpcontent2/source/text/shared/02/02140000.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Increase Indent -/text/shared/02/02140000.xhp - - - -
+ + Increase Indent + /text/shared/02/02140000.xhp + + + +
paragraphs; increasing indents of -Increase Indent -Increases the left indent of the current paragraph and sets it to the next tab stop. -Click the Increase Indent icon to increase the indentation of the cell content of the selected cells. - -
-If several paragraphs are selected, the indentation of all selected paragraphs is increased. + +Increase Indent + Click the Increase Indent icon to increase the left indent of the current paragraph or cell content and set it to the next tab position. +
+ If several paragraphs are selected, the indentation of all selected paragraphs is increased. The cell content refers to the current value under Format - Cell - Alignment. -
- - - - -Icon +
+
+ + + +Icon - - -Increase Indent - - -
-
-Click the Increase Indent icon while holding down the Command Ctrl key to move the indenting of the selected paragraph by the default tab distance set under Tools - Options - %PRODUCTNAME Writer - General. + + + Increase Indent + + + + +
+ Click the Increase Indent icon while holding down the Command +Ctrl key to move the indenting of the selected paragraph by the default tab distance set under Tools - Options - %PRODUCTNAME Writer - General. -Example: + Example: -The indents of two paragraphs are moved with the Increase Indent function to a standard tab distance of 2 cm: + The indents of two paragraphs are moved with the Increase Indent function to a standard tab distance of 2 cm: - - - -Original indent - - -Indent increased - - -Indent increased by the amount with the Command keyCtrl key - - - - -0.25 cm - - -2 cm - - -2.25 cm - - - - -0.5 cm - - -2 cm - - -2.5 cm - - -
+ + + + + Original indent + + + Indent increased + + + Indent increased by the amount with the Command key +Ctrl key + + + + + 0.25 cm + + + 2 cm + + + 2.25 cm + + + + + 0.5 cm + + + 2 cm + + + 2.5 cm + + +
+ - - + + + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/02/09070000.xhp b/helpcontent2/source/text/shared/02/09070000.xhp index 8ddd24ce4c..6e45cffa5c 100644 --- a/helpcontent2/source/text/shared/02/09070000.xhp +++ b/helpcontent2/source/text/shared/02/09070000.xhp @@ -1,7 +1,8 @@ - - - - - + ************************************************************************ + --> + - - -Hyperlink Dialog -/text/shared/02/09070000.xhp - - -Sun Microsystems, Inc. -converted from old format - fpe - - - - -Select the type of hyperlink to be inserted. +Select the type of hyperlink to be inserted. -Opens the hyperlink at the cursor position. - - - - +Opens the hyperlink in your default web browser. + + +Opens the Hyperlink dialog. + +Copies the URL to the clipboard. + +Removes the hyperlink, leaving plain text. + + + + -Apply -Applies the data to your document. +Apply + Applies the data to your document. -Close -Closes the dialog without saving. -Help -Opens the Help. +Close + Closes the dialog without saving. + Help + Opens the Help. -Back -Resets the entries in the dialog to their original state. -
- -
- - +Back + Resets the entries in the dialog to their original state. +
+ +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/02/14020100.xhp b/helpcontent2/source/text/shared/02/14020100.xhp index b49029ba74..856f55fcf4 100644 --- a/helpcontent2/source/text/shared/02/14020100.xhp +++ b/helpcontent2/source/text/shared/02/14020100.xhp @@ -1,7 +1,8 @@ - - - + ************************************************************************ + --> + - - -Add Tables -/text/shared/02/14020100.xhp - - -Sun Microsystems, Inc. -converted from old format - fpe - - - + + Add Tables + /text/shared/02/14020100.xhp + + + tables in databases; adding to queries - + -Add Tables -Specifies the tables to be inserted into the design window. In the Add Tables dialog, select the tables you need for your current task. +Add Tables + Specifies the tables to be inserted into the design window. In the Add Tables dialog, select the tables you need for your current task. When creating a query or a new table presentation, select the corresponding table to which the query or table presentation should refer. When working with relational databases, select the tables between which you want to build relationships. -The inserted tables appear in a separate window in the query design or relational windows, along with a list of the fields contained in the table. You can determine the size and order of this window. -
- -
-Table -Table name -Lists the available tables. To insert a table, select one from the list and click Add. You can also double-click the table name, and a window will be displayed containing the table fields at the top of the query design or the relational window. + The inserted tables appear in a separate window in the query design or relational windows, along with a list of the fields contained in the table. You can determine the size and order of this window. +
+ +
+ Table + +Shows only tables. + +Shows only queries. + Table name + Lists the available tables. To insert a table, select one from the list and click Add. You can also double-click the table name, and a window will be displayed containing the table fields at the top of the query design or the relational window. -Add -Inserts the currently selected table. +Add + Inserts the currently selected table. -Close -Closes the Add Tables dialog. - - +Close + Closes the Add Tables dialog. + + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/02/makefile.mk b/helpcontent2/source/text/shared/02/makefile.mk index 73c361ee7c..d98125fe5e 100644 --- a/helpcontent2/source/text/shared/02/makefile.mk +++ b/helpcontent2/source/text/shared/02/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.11.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/shared/02/paintbrush.xhp b/helpcontent2/source/text/shared/02/paintbrush.xhp index 57ac1e1dd8..64f11fc419 100755 --- a/helpcontent2/source/text/shared/02/paintbrush.xhp +++ b/helpcontent2/source/text/shared/02/paintbrush.xhp @@ -48,7 +48,7 @@ First select some text or an object, then click this icon. Then click on or drag across other text or click an object to apply the same formatting.i93691
Click the Format Paintbrush icon -{ENTER ALTERNATE DESCRIPTION HERE} +Icon on the Standard toolbar.
@@ -56,7 +56,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon diff --git a/helpcontent2/source/text/shared/04/makefile.mk b/helpcontent2/source/text/shared/04/makefile.mk index 59727b800e..38242a7ea1 100644 --- a/helpcontent2/source/text/shared/04/makefile.mk +++ b/helpcontent2/source/text/shared/04/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/shared/05/00000001.xhp b/helpcontent2/source/text/shared/05/00000001.xhp index b4028ba58e..f7217c5de5 100755 --- a/helpcontent2/source/text/shared/05/00000001.xhp +++ b/helpcontent2/source/text/shared/05/00000001.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 00000001.xhp,v $ - * $Revision: 1.10.4.2 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,36 +35,39 @@ - -Getting Support -/text/shared/05/00000001.xhp - - - -
+ + Getting Support + /text/shared/05/00000001.xhp + + + +
support on the Web -getting support -forums and support -Web support + getting support + forums and support + Web support -Getting Support +Getting Support -Many questions and answers are the same for OpenOffice.org software and for the commercial StarOffice or StarSuite software by Sun Microsystems, Inc. -You can find support on the OpenOffice.org website at support.openoffice.org. -Visit www.sun.com/star/support to get an overview of additional support offerings by Sun Microsystems and other parties. -For a summary of the current support services refer to the Readme file in the %PRODUCTNAME folder.some new paras from i61933 -Local language support pages -The OpenOffice.org localization projects offer support pages in local languages. Find an overview of the native language projects at projects.openoffice.org/native-lang.html. You can find help and support in English language on the OpenOffice.org website at support.openoffice.org. -Mailing lists -Ask about OpenOffice.org, find help by volunteers, and discuss topics on the public mailing lists. You can find many general and specialized mailing lists on the OpenOffice.org website at www.openoffice.org/mail_list.html. -Forum -You can access web forums to ask and answer questions about OpenOffice.org. A list of web forums hosted by Sun Microsystems can be found at http://user.services.openoffice.org/en/forum/listforums.php. -Security -In case you are concerned about any security issue with using this software, you can contact the developers on the public mail list dev@openoffice.org. If you want to discuss any issue with other users, send an email to the public mail list discuss@openoffice.org. -Downloads -You can download the latest version of OpenOffice.org at download.openoffice.org. -Documentation -You can download documentation as PDF files, how-tos, and guides from the OpenOffice.org website at documentation.openoffice.org. -
- - + Many questions and answers are the same for OpenOffice.org software and for the commercial StarOffice or StarSuite software by Sun Microsystems, Inc. + You can find support on the OpenOffice.org website at support.openoffice.org. + Visit www.sun.com/star/support to get an overview of additional support offerings by Sun Microsystems and other parties. + For a summary of the current support services refer to the Readme file in the %PRODUCTNAME folder.some new paras from i61933 +Local language support pages + The OpenOffice.org localization projects offer support pages in local languages. Find an overview of the native language projects at projects.openoffice.org/native-lang.html. You can find help and support in English language on the OpenOffice.org website at support.openoffice.org. + Mailing lists + Ask about OpenOffice.org, find help by volunteers, and discuss topics on the public mailing lists. You can find many general and specialized mailing lists on the OpenOffice.org website at www.openoffice.org/mail_list.html. + Forum + You can access web forums to ask and answer questions about OpenOffice.org. A list of web forums hosted by Sun Microsystems can be found at http://user.services.openoffice.org/en/forum/listforums.php. + Security + In case you are concerned about any security issue with using this software, you can contact the developers on the public mail list dev@openoffice.org. If you want to discuss any issue with other users, send an email to the public mail list discuss@openoffice.org. + Downloads + You can download the latest version of OpenOffice.org at download.openoffice.org. + Documentation + You can download documentation as PDF files, how-tos, and guides from the OpenOffice.org website at documentation.openoffice.org. + Participate and give back + If you want to take an active role in the worldwide OpenOffice.org community, you are very welcome to give feedback, discuss features, propose enhancements, write your own article in an FAQ, how-to, manual, create a video tutorial, etc. + Visit the documentation web site or the Wiki starting page and follow the links for contributors. +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/05/makefile.mk b/helpcontent2/source/text/shared/05/makefile.mk index b53847959e..5e21e8ef4f 100644 --- a/helpcontent2/source/text/shared/05/makefile.mk +++ b/helpcontent2/source/text/shared/05/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/shared/07/makefile.mk b/helpcontent2/source/text/shared/07/makefile.mk index c080f0760b..a804cb09cd 100644 --- a/helpcontent2/source/text/shared/07/makefile.mk +++ b/helpcontent2/source/text/shared/07/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/shared/autokorr/makefile.mk b/helpcontent2/source/text/shared/autokorr/makefile.mk index 1f89e18dc9..2390d5a85d 100644 --- a/helpcontent2/source/text/shared/autokorr/makefile.mk +++ b/helpcontent2/source/text/shared/autokorr/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/shared/autopi/makefile.mk b/helpcontent2/source/text/shared/autopi/makefile.mk index c0c61ff588..ff32f73dbd 100644 --- a/helpcontent2/source/text/shared/autopi/makefile.mk +++ b/helpcontent2/source/text/shared/autopi/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/shared/explorer/database/02010101.xhp b/helpcontent2/source/text/shared/explorer/database/02010101.xhp index 35352548a5..bc2a0c1f3c 100755 --- a/helpcontent2/source/text/shared/explorer/database/02010101.xhp +++ b/helpcontent2/source/text/shared/explorer/database/02010101.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Relations -/text/shared/explorer/database/02010101.xhp - - - + + Join Properties + /text/shared/explorer/database/02010101.xhp + + + links;relational databases (Base) -inner joins (Base) -joins in databases (Base) -left joins (Base) -right joins (Base) -full joins (Base) -mw deleted "join properties" and changed "link properties..." to "links;"Relations -If you double-click a connection between two linked fields in the query design, or if you choose Insert - New Relation, the Relations dialog appears. These properties will be used in all queries created in the future. -
- -
+ inner joins (Base) + joins in databases (Base) + left joins (Base) + right joins (Base) + full joins (Base) +mw deleted "join properties" and changed "link properties..." to "links;" +Join Properties + If you double-click a connection between two linked fields in the query design, or if you choose Insert - New Relation, the Join Properties dialog appears. These properties will be used in all queries created in the future. +
+ +
-Tables involved -Specifies two different tables that you want to join.UFI: removed a help idFields involved -Specifies two data fields that will be joined by a relation. -Options -Type -Specifies the link type of the selected link. Some databases support only a subset of the possible types. -Inner Join -With the internal join, the results table contains only the records for which the content of the linked fields is the same. In $[officename] SQL this type of link is created by a corresponding WHERE clause. -Left Join -With the left join, the results table contains all fields of the left table and only those fields of the right table for which the content of the linked fields is the same. In $[officename] SQL this type of link corresponds to the LEFT OUTER JOIN command. -Right Join -With the right join, the results table contains all fields of the right table and only those fields of the left table for which the content of the linked fields is the same. In $[officename] SQL this type of link corresponds to the RIGHT OUTER JOIN command. -Full Join -For a full join, the results table contains all fields of the left and right tables. In the SQL of $[officename] this type of link corresponds to the FULL OUTER JOIN command. - - + +Tables involved + Specifies two different tables that you want to join. + Fields involved + Specifies two data fields that will be joined by a relation. + Options + +Type + Specifies the link type of the selected link. Some databases support only a subset of the possible types. + Inner Join + With the internal join, the results table contains only the records for which the content of the linked fields is the same. In $[officename] SQL this type of link is created by a corresponding WHERE clause. + Left Join + With the left join, the results table contains all fields of the left table and only those fields of the right table for which the content of the linked fields is the same. In $[officename] SQL this type of link corresponds to the LEFT OUTER JOIN command. + Right Join + With the right join, the results table contains all fields of the right table and only those fields of the left table for which the content of the linked fields is the same. In $[officename] SQL this type of link corresponds to the RIGHT OUTER JOIN command. + Full Join + For a full join, the results table contains all fields of the left and right tables. In the SQL of $[officename] this type of link corresponds to the FULL OUTER JOIN command. + +Natural + Inserts the keyword NATURAL into the SQL statement that defines the relation. The relation joins all columns that have the same column name in both tables. The resulting joined table contains only one column for each pair of equally named columns. + + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/explorer/database/makefile.mk b/helpcontent2/source/text/shared/explorer/database/makefile.mk index 3492dd4323..f2d85e7594 100644 --- a/helpcontent2/source/text/shared/explorer/database/makefile.mk +++ b/helpcontent2/source/text/shared/explorer/database/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.13.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # @@ -112,6 +112,7 @@ XHPFILES = \ menuinsert.xhp \ menutools.xhp \ menuview.xhp \ + migrate_macros.xhp \ password.xhp \ querywizard00.xhp \ querywizard01.xhp \ diff --git a/helpcontent2/source/text/shared/explorer/database/migrate_macros.xhp b/helpcontent2/source/text/shared/explorer/database/migrate_macros.xhp new file mode 100755 index 0000000000..b90fc54ea4 --- /dev/null +++ b/helpcontent2/source/text/shared/explorer/database/migrate_macros.xhp @@ -0,0 +1,71 @@ + + + + + + + + + Migrate Macros + /text/shared/explorer/database/migrate_macros.xhp + + + +
+wizards;macros (Base) + Macro Wizard (Base) + macros;attaching new (Base) + migrating macros (Base) +MW added 2 index entries +Migrate Macros + +The Database Document Macro Migration Wizard moves existing macros from sub-documents of an old Base file into the new Base file's macro storage area. +
+ +Choose a location and file name to save the new database file. By default, the new file gets the same name as the old file, while the old file gets renamed with the string "backup" in the name. + +The list shows all changes that were applied to the database file. + Previously, macros have been allowed to reside only in the text sub-documents of forms and reports. Starting with OpenOffice.org 3.1 or StarOffice 9.1, macros can also be stored in the Base file itself. This means that macros in Base files can be called now from any of its sub-components: forms, reports, table design, query design, relation design, table data view. + However, it is technically not possible to store macros both in a Base file and in its sub-documents at the same time. So, if you want to attach some new macros to the Base file, while retaining any existing old macros that were stored in the sub-documents, you must move the existing old macros up to the Base file's macro storage area. + The Database Document Macro Migration Wizard can move the macros up into the Base file's storage area. You can then examine the macros and edit them as needed. + For example, it is possible that macros from the sub-documents had the same module names and macro names. After you moved the macros into one common macro storage area, you must edit the macros to make the names unique. The wizard cannot do this. + The wizard can backup the Base file to another folder of your choice. The wizard changes the original Base file. The backup remains unchanged. + + + + +
+ An in depth explanation by the developers (Wiki). +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/guide/autocorr_url.xhp b/helpcontent2/source/text/shared/guide/autocorr_url.xhp index 851d823829..e51712df3d 100755 --- a/helpcontent2/source/text/shared/guide/autocorr_url.xhp +++ b/helpcontent2/source/text/shared/guide/autocorr_url.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: autocorr_url.xhp,v $ - * $Revision: 1.10.4.1 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,52 +35,53 @@ - -Turning off Automatic URL Recognition -/text/shared/guide/autocorr_url.xhp - - - + + Turning off Automatic URL Recognition + /text/shared/guide/autocorr_url.xhp + + + AutoCorrect function; URL recognition -recognizing URLs automatically -Internet; turning off recognition of addresses -automatic hyperlink formatting -URL;turning off URL recognition -hyperlinks;turning off automatic recognition -links;turning off automatic recognition + recognizing URLs automatically + automatic hyperlink formatting + URL;turning off URL recognition + hyperlinks;turning off automatic recognition + links;turning off automatic recognition + predictive text, see also AutoCorrect function/AutoFill function/AutoInput function/word completion/text completion -Turning off Automatic URL Recognition +Turning off Automatic URL Recognition -When you enter text, $[officename] automatically recognizes a word that may be a URL and replaces the word with a hyperlink. $[officename] formats the hyperlink with direct font attributes (color and underline) the properties of which are obtained from certain Character Styles. -If you do not want $[officename] to automatically recognize URLs as you are typing, there are several ways of turning off this feature. -Undo URL Recognition - - -When you are typing and notice that a text has just been automatically converted into a hyperlink, press CommandCtrl+Z to undo this formatting. - - -If you do not notice this conversion until later, select the hyperlink and choose the menu command Format - Default Formatting. - - -Turn off URL Recognition - - -Load a document of the type for which you want to modify the URL recognition. -If you want to modify the URL recognition for text documents, open a text document. - - -Choose Tools - AutoCorrect Options. - - -In the AutoCorrect dialog, select the Options tab. - - -If you unmark URL Recognition, words will no longer be automatically replaced with hyperlinks. -In $[officename] Writer there are two check boxes in front of URL Recognition. The box in the first column is for later post-editing and the box in the second column is for AutoCorrect as you type. - - -
- -
- - + When you enter text, $[officename] automatically recognizes a word that may be a URL and replaces the word with a hyperlink. $[officename] formats the hyperlink with direct font attributes (color and underline) the properties of which are obtained from certain Character Styles. + If you do not want $[officename] to automatically recognize URLs as you are typing, there are several ways of turning off this feature. + Undo URL Recognition + + + When you are typing and notice that a text has just been automatically converted into a hyperlink, press Command +Ctrl+Z to undo this formatting. + + + If you do not notice this conversion until later, select the hyperlink and choose the menu command Format - Default Formatting. + + + Turn off URL Recognition + + + Load a document of the type for which you want to modify the URL recognition. + If you want to modify the URL recognition for text documents, open a text document. + + + Choose Tools - AutoCorrect Options. + + + In the AutoCorrect dialog, select the Options tab. + + + If you unmark URL Recognition, words will no longer be automatically replaced with hyperlinks. + In $[officename] Writer there are two check boxes in front of URL Recognition. The box in the first column is for later post-editing and the box in the second column is for AutoCorrect as you type. + + +
+ +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/guide/data_enter_sql.xhp b/helpcontent2/source/text/shared/guide/data_enter_sql.xhp index 4708c94732..ba09c7e664 100644 --- a/helpcontent2/source/text/shared/guide/data_enter_sql.xhp +++ b/helpcontent2/source/text/shared/guide/data_enter_sql.xhp @@ -1,8 +1,8 @@ - - + + - + - -Executing SQL Commands -/text/shared/guide/data_enter_sql.xhp - - -Sun Microsystems, Inc. -fpe: changed to match new database interface - - - + + Executing SQL Commands + /text/shared/guide/data_enter_sql.xhp + + + SQL; executing SQL commands -queries;creating in SQL view -commands;SQL -executing;SQL commands -mw changed "SQL;executing commands" -Executing SQL Commands + queries;creating in SQL view + commands;SQL + executing SQL commands +mw changed "SQL;executing commands"mw made "executing;" a one level entry +Executing SQL Commands -With the help of SQL commands you can control the database directly, and can also create and edit tables and queries. -Not all database types support all SQL instructions. If necessary, find out which SQL commands are supported by your database system. -To execute an SQL statement directly - - -Choose File - Open to open a database file. - - -Choose Tools - SQL. - - -Click the Create Query in SQL View icon -Icon + With the help of SQL commands you can control the database directly, and can also create and edit tables and queries. + Not all database types support all SQL instructions. If necessary, find out which SQL commands are supported by your database system. + To execute an SQL statement directly + + + Choose File - Open to open a database file. + + + Choose Tools - SQL. + + + Click the Create Query in SQL View icon +Icon or -Select an existing query from the list and click the Edit icon -Icon + Select an existing query from the list and click the Edit icon +Icon . - - -In the Query window, choose View - Switch Design View On/Off. Edit the SQL command. - - -Click the Run icon -Icon + + + In the Query window, choose View - Switch Design View On/Off. Edit the SQL command. + + + Click the Run icon +Icon . The result of the query is displayed in the upper window. - - -Click the Save or Save As icon -Icon + + + Click the Save or Save As icon +Icon to save the query. - - -
-Query Design - -
- - + + +
+ Query Design + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/guide/data_tabledefine.xhp b/helpcontent2/source/text/shared/guide/data_tabledefine.xhp index 4fb9917c12..4fd7733d66 100644 --- a/helpcontent2/source/text/shared/guide/data_tabledefine.xhp +++ b/helpcontent2/source/text/shared/guide/data_tabledefine.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Table Design -/text/shared/guide/data_tabledefine.xhp - - - -tables in databases; creating in design view -designing; database tables -properties;fields in databases -fields;database tables -AutoValue;database tables -primary key;database tables -MW deleted "database tables;" and changed "tables in databases;"UFI added AutoValue and Primary Key entry - i48831 -Table Design + + Table Design + /text/shared/guide/data_tabledefine.xhp + + + +tables in databases; creating in design view (manually) + designing; database tables + properties;fields in databases + fields;database tables + AutoValue (Base) + primary keys;design view +MW deleted "database tables;" and changed "tables in databases;"UFI added AutoValue and Primary Key entry - i48831MW changed Tables in databases, AutoValue and Primary Key entries + + Table Design -This section contains information about how to create a new database table in the design view. -Open the database file of the database where you want a new table. Click the Tables icon. Choose Create Table in Design View to create a new table. -In the Design view, you can now create the fields for your table. - - -Enter new fields in rows from top to bottom. Click the Field Name cell and enter a field name for each data field. - - -Include a "primary key" data field. Base needs a primary key to be able to edit the table contents. A primary key has unique contents for each data record. For example, insert a numerical field, right-click the first column, and choose Primary Key from the context menu. Set AutoValue to "Yes", so Base can automatically increment the value for each new record. - - -In the next cell to the right, define the Field Type. When you click in the cell, you can select a field type in the combo box. - - -Each field can only accept data corresponding to the specified field type. For example, it is not possible to enter text in a number field. Memo fields in dBASE III format are references to internally-managed text files which can hold up to 64KB text. -You can enter an optional Description for each field. The text of the description will appear as a tip on the column headings in the table view. -Field Properties -Enter properties for each selected data field. Depending on the database type, some input facilities may not be available. -In the Default value box, enter the default contents for every new record. This contents can be edited later. -In the Entry required box, specify whether or not the field may remain empty. -For the Length box, a combo box may be shown that provides the available choices. - - - - + This section contains information about how to create a new database table in the design view. + Open the database file of the database where you want a new table. Click the Tables icon. Choose Create Table in Design View to create a new table. + In the Design view, you can now create the fields for your table. + + + Enter new fields in rows from top to bottom. Click the Field Name cell and enter a field name for each data field. + + + Include a "primary key" data field. Base needs a primary key to be able to edit the table contents. A primary key has unique contents for each data record. For example, insert a numerical field, right-click the first column, and choose Primary Key from the context menu. Set AutoValue to "Yes", so Base can automatically increment the value for each new record. + + + In the next cell to the right, define the Field Type. When you click in the cell, you can select a field type in the combo box. + + + Each field can only accept data corresponding to the specified field type. For example, it is not possible to enter text in a number field. Memo fields in dBASE III format are references to internally-managed text files which can hold up to 64KB text. + You can enter an optional Description for each field. The text of the description will appear as a tip on the column headings in the table view. + Field Properties + Enter properties for each selected data field. Depending on the database type, some input facilities may not be available. + In the Default value box, enter the default contents for every new record. This contents can be edited later. + In the Entry required box, specify whether or not the field may remain empty. + For the Length box, a combo box may be shown that provides the available choices. + + + + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/guide/fontwork.xhp b/helpcontent2/source/text/shared/guide/fontwork.xhp index d7f5a07157..3cdaf2c2d4 100755 --- a/helpcontent2/source/text/shared/guide/fontwork.xhp +++ b/helpcontent2/source/text/shared/guide/fontwork.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Fontwork For Graphical Text Art -/text/shared/guide/fontwork.xhp - - - - - - + + Fontwork For Graphical Text Art + /text/shared/guide/fontwork.xhp + + + graphical text art -designing; fonts -TextArt, see Fontwork -WordArt, see Fontwork -Fontwork icons -text effects -effects; Fontwork icons -text; Fontwork icons -3D text creation -rotating;3D text -editing;Fontwork objects -inserting;Fontwork objects - - MW changed "adding;" to "inserting;" - Fontwork For Graphical Text Art + designing; fonts + TextArt, see Fontwork + WordArt, see Fontwork + Fontwork icons + text effects + effects; Fontwork icons + text; Fontwork icons + 3D text creation + rotating;3D text + editing;Fontwork objects + inserting;Fontwork objects +MW changed "adding;" to "inserting;" +Fontwork For Graphical Text Art - You can use Fontwork to create graphical text art objects. - To create a Fontwork object - - - On the Drawing toolbar, click the Fontwork Gallery icon. -Fontwork icon + You can use Fontwork to create graphical text art objects. + To create a Fontwork object + + + If you don't see the Drawing toolbar or the Fontwork toolbar, choose View - Toolbars to enable the toolbar. + + + On the Drawing toolbar or on the Fontwork toolbar, click the Fontwork Gallery icon. +Icon - - - In the Fontwork Gallery dialog, select a Fontwork style and click OK. - The Fontwork object is inserted into your document. - - - Double-click the object to enter text edit mode. - - - Replace the default Fontwork text with your own text. - - - Press Esc to exit text edit mode. - - - To edit a Fontwork object - - - Click the Fontwork object. - The Fontwork toolbar is displayed. If you do not see the Fontwork toolbar, choose View - Toolbars - Fontwork. - - - Click an icon in the Fontwork toolbar. - The following icons are available: - - - - - Fontwork Gallery - adds another Fontwork object - - - Fontwork Shape - edits the shape - - - Fontwork Same Letter Heights - changes the height of characters - - - Fontwork Alignment - aligns the text - - - Fontwork Character Spacing - changes the character spacing and kerning - - - To edit more Fontwork attributes - - - Click the Fontwork object to select it. - - - Select the properties from the Drawing Object Properties toolbar. You can change the line width, line color, fill color, fill style, and more. - - -
- - Fontwork toolbar - - -
- - + + + In the Fontwork Gallery dialog, select a Fontwork style and click OK. + The Fontwork object is inserted into your document. + + + Double-click the object to enter text edit mode. + + + Replace the default Fontwork text with your own text. + + + Press Esc to exit text edit mode. + + + To edit a Fontwork object + + + Click the Fontwork object. If the Fontwork object is inserted in the background, hold down the Ctrl key while you click. + The Fontwork toolbar is displayed. If you do not see the Fontwork toolbar, choose View - Toolbars - Fontwork. + + + Click an icon in the Fontwork toolbar. + The following icons are available: + + + + + Fontwork Gallery - adds another Fontwork object + + + Fontwork Shape - edits the shape + + + Fontwork Same Letter Heights - changes the height of characters + + + Fontwork Alignment - aligns the text + + + Fontwork Character Spacing - changes the character spacing and kerning + + + To edit more Fontwork attributes + + + Click the Fontwork object. If the Fontwork object is inserted in the background, hold down the Ctrl key while you click. + + + Select the properties from the Drawing Object Properties toolbar. You can change the line width, line color, fill color, fill style, and more. + + +
+ Fontwork toolbar + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/guide/insert_graphic_drawit.xhp b/helpcontent2/source/text/shared/guide/insert_graphic_drawit.xhp index 1a69bdf849..6c37196df9 100644 --- a/helpcontent2/source/text/shared/guide/insert_graphic_drawit.xhp +++ b/helpcontent2/source/text/shared/guide/insert_graphic_drawit.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: insert_graphic_drawit.xhp,v $ - * $Revision: 1.17.4.3 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,70 +35,71 @@ - -Editing Graphic Objects -/text/shared/guide/insert_graphic_drawit.xhp - - - + + Editing Graphic Objects + /text/shared/guide/insert_graphic_drawit.xhp + + + resizing, see also scaling/zooming -scaling, see also zooming -drawings, see also draw objects -graphic objects, see also draw objects -text; drawing pictures -inserting; drawings -pictures; drawing -objects; copying when moving in presentations -draw objects; adding/editing/copying -circle drawings -square drawings -handles; scaling -scaling; objects -objects;moving and resizing with mouse -resizing;objects, by mouse -copying; draw objects -pasting;draw objects -editing;draw objects -pictures;scaling/resizing + scaling, see also zooming + drawings, see also draw objects + graphic objects, see draw objects + text; drawing pictures + inserting; drawings + pictures; drawing + objects; copying when moving in presentations + draw objects; adding/editing/copying + circle drawings + square drawings + handles; scaling + scaling; objects + objects;moving and resizing with mouse + resizing;objects, by mouse + copying; draw objects + pasting;draw objects + editing;draw objects + pictures;scaling/resizing MW added "graphic objects, see also..." -Editing Graphic Objects +Editing Graphic Objects -Choose View - Toolbars - Drawing to open the Drawing toolbar, if it is not already open. -Drawing objects can be subsequently edited and modified. Drawing objects created in this way are vector graphics, which you can scale freely without any loss of quality. -To create a rectangle, click the rectangle icon and move your cursor to the place in the document where you want one corner of the rectangle to be. Press the mouse button and hold it down while dragging to the opposite corner of the rectangle. When you release the mouse button, the rectangle is inserted in the document. It is selected, and you can edit its properties through the context menu. - - -To draw multiple objects of the same type, double-click the icon. + Choose View - Toolbars - Drawing to open the Drawing toolbar, if it is not already open. + Drawing objects can be subsequently edited and modified. Drawing objects created in this way are vector graphics, which you can scale freely without any loss of quality. + To create a rectangle, click the rectangle icon and move your cursor to the place in the document where you want one corner of the rectangle to be. Press the mouse button and hold it down while dragging to the opposite corner of the rectangle. When you release the mouse button, the rectangle is inserted in the document. It is selected, and you can edit its properties through the context menu. + + + To draw multiple objects of the same type, double-click the icon. To draw multiple objects of the same type, double-click the icon. Draw multiple objects of the same type. Click the document without moving the mouse to stop drawing objects. - - -If you want to open up draw objects from the center instead of dragging from one corner to the other, hold down the Option + + + If you want to open up draw objects from the center instead of dragging from one corner to the other, hold down the Option Alt key while dragging. With some window managers, you may need to hold down also the meta key. - - -Holding down the Shift key while dragging restricts the created object. For example, instead of a rectangle you get a square, instead of an ellipse you get a circle. When you drag a handle of an existing object with Shift held down, the aspect ratio of the object is retained. - - -To scale the objects, first select them by clicking on them with the selection tool. You then see eight handles around the object. When you drag one of the four corner handles, the opposite corner remains fixed while the other three corners move. When you drag one of the side handles, the opposite side remains fixed. - - -To scale a draw object using the keyboard, first select the object, then press Command + + + Holding down the Shift key while dragging restricts the created object. For example, instead of a rectangle you get a square, instead of an ellipse you get a circle. When you drag a handle of an existing object with Shift held down, the aspect ratio of the object is retained. + + + To scale the objects, first select them by clicking on them with the selection tool. You then see eight handles around the object. When you drag one of the four corner handles, the opposite corner remains fixed while the other three corners move. When you drag one of the side handles, the opposite side remains fixed. + + + To scale a draw object using the keyboard, first select the object, then press Command Ctrl+Tab repeatedly to highlight one of the handles. Then press an arrow key. To scale in smaller steps, hold down the Option Alt key while pressing an arrow key. Press Esc to leave the point edit mode. - - -To move draw objects, first select them. To select more than one object, press the Shift key while clicking. Select text objects by clicking exactly on their edge. While holding down the mouse button, drag the objects to the new location. - - -To move a draw object using the keyboard, first select the object, then press an arrow key. To move in smaller steps, hold down the Option + + + To move draw objects, first select them. To select more than one object, press the Shift key while clicking. Select text objects by clicking exactly on their edge. While holding down the mouse button, drag the objects to the new location. + + + To move a draw object using the keyboard, first select the object, then press an arrow key. To move in smaller steps, hold down the Option Alt key while pressing an arrow key. - - -To revert to normal text mode after creating and editing draw objects, click in an area of the document containing no draw or other objects. If you see a drawing cursor, first exit this mode by clicking the Select icon. -
-Information about the individual icons + + + To revert to normal text mode after creating and editing draw objects, click in an area of the document containing no draw or other objects. If you see a drawing cursor, first exit this mode by clicking the Select icon. +
+ Information about the individual icons @@ -124,5 +125,5 @@
- - + + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/guide/labels_database.xhp b/helpcontent2/source/text/shared/guide/labels_database.xhp index ea304c8e66..0c47b78704 100644 --- a/helpcontent2/source/text/shared/guide/labels_database.xhp +++ b/helpcontent2/source/text/shared/guide/labels_database.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Printing Address Labels -/text/shared/guide/labels_database.xhp - - - + + Printing Address Labels + /text/shared/guide/labels_database.xhp + + + address labels from databases -labels; from databases -stickers -databases;creating labels -mw deleted "creating;"Printing Address Labels + labels; from databases + stickers + databases;creating labels +mw deleted "creating;" +Printing Address Labels - - -Choose File - New - Labels to open the Labels dialog. - - -Select the format of the label sheets you want to print on. Remember to mark Synchronize contents on the Options tab. - - -Click New Document. - - -When you see the label document, open the data source view by choosing View - Data Sources. - - -In the data source view, select your address data source table. - - -Drag the data fields needed for the Address individually into the top left label. For example, click on the column header NAME and, keeping the mouse button depressed, drag it into the label. This inserts a field. Put the fields in order to complete the address in the first label at top left. - - -Place the cursor at the last text position (after the last field) in the first label. - - -Choose Insert - Fields - Other, and go to the Database tab. - - -Select the type Next record, click on Insert and then on Close. - - -You can now synchronize the labels. Click on the Synchronize -Labels button in the small window. - - -In the data source view, select the records for which you would like address stickers, by clicking on the row headers to the left. Use the Shift or Ctrl key in the usual way to select several records at the same time. - - -On the Table Data bar, click the Data to Fields icon. - - -You can then save and/or print the label document. - - -When you choose to print the document, you will be asked if you want to print a form letter. Answer Yes to open the Mail Merge dialog. -
- -
- - + + + Choose File - New - Labels to open the Labels dialog. + + + On the Labels tab page, select the format of the label sheets you want to print on. + + + Choose the database and table from which to get the data. + + + Select a database field of which you want to print the contents. Click the button that shows a left arrow to insert the database field into the Label Text box. + Continue to select and insert database fields if you want more fields on every label. You can press Enter to insert a new line, and you can type any character to insert fixed text. + + + Optionally, if you want to type more text, apply formatting, or insert images and line art, you should enable Synchronize contents on the Options tab. If you enable this, once you leave the Labels dialog box a small window opens with a Synchronize button. Now you only need to work on the first label on the labels document, then click the Synchronize button to copy your work to every label of the document. + + + Click New Document. + + + When you see the label document, you might want to temporarily enable View - Field Names. This displays the fields in a more visible manner, so that you can arrange and edit label contents more easily. + + + You can save and/or print the label document. + + + When you choose to print the document, you will be asked if you want to print a form letter. Answer Yes to open the Mail Merge dialog. In the Mail Merge dialog, you can select the records for which you want to print labels. +
+ +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/guide/language_select.xhp b/helpcontent2/source/text/shared/guide/language_select.xhp index 67297ff33f..098ffc45c1 100755 --- a/helpcontent2/source/text/shared/guide/language_select.xhp +++ b/helpcontent2/source/text/shared/guide/language_select.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Selecting the Document Language -/text/shared/guide/language_select.xhp - - - + + Selecting the Document Language + /text/shared/guide/language_select.xhp + + + languages; selecting for text -documents; languages -characters; language selection -character styles;language selection -text; language selection -paragraph styles; languages -drawings; languages -defaults;languages -spellcheck; default languages -dictionaries, see also languages -mw deleted "applying;" and changed "languages;"Selecting the Document Language + documents; languages + characters; language selection + character styles;language selection + text; language selection + paragraph styles; languages + drawings; languages + defaults;languages + spellcheck; default languages + dictionaries, see also languages +mw deleted "applying;" and changed "languages;" +Selecting the Document Language -The language you select for your document determines the dictionary used for spellcheck, thesaurus and hyphenation, the decimal and thousands delimiter used and the default currency format. - - -The language you select applies to the whole document. - - -Within the document, you can apply a separate language to any paragraph style. This has priority over the language of the whole document. - - -You can assign a language to selected pieces of text in a paragraph, either by direct formatting or with a character style. This assignment has priority over the paragraph style and document language. - - -Selecting a language for the whole document - - -Choose Tools - Options. Go to Language Settings - Languages. - - -Under Default languages for documents, select the document language for all newly created documents. If you mark For the current document only, your choice will only apply to the current document. Close the dialog with OK. - - -Selecting a language for a Paragraph Style - - -Place the cursor in the paragraph whose paragraph style you want to edit. - - -Open the context menu and select Edit Paragraph Style. This opens the Paragraph Style dialog. - - -Select the Font tab. - - -Select the Language and click OK. -All paragraphs formatted with the current paragraph style will have the selected language. - - -Applying a language directly to selected text - - -Select the text to which you want to apply a language. - - -Choose Format - Character. This opens the Character dialog. - - -Select the Font tab. - - -Select the Language and click OK. - - -In %PRODUCTNAME Calc, choose Format - Cells and proceed accordingly. -Selecting a language for a Character Style - - -Open the Styles and Formatting window and click on the Character Styles icon. - - -Click on the name of the character style to which you want to apply a different language. - - -Then open the context menu in the Styles and Formatting window and select Modify. This opens the Character Style dialog. - - -Select the Font tab. - - -Select the Language and click OK. -Now you can apply the character style to your selected text. - -UFI: see i76182Adding More Text Languages - - -In OpenOffice.org software, you can choose File - Wizards - Install new dictionaries to open a Writer document which helps you to install more languages.this document is only available with OOo, not SO - - -The document contains pages in many different languages. Click your own language on the first page to see the following instructions in your own language. - - -Click the big button in the middle of the document page. This starts a macro to display more info and download the dictionary files. - - -Select to install the new files for the current user only or for all users (which requires write permission to the shared folder). - - -Click Next. - - -Click Retrieve the list button. After some short delay, you see a list of available Spelling dictionaries. - - -Select the languages for Spelling and click Next. - - -Click Retrieve the list and select languages for Hyphenation and for Thesaurus. - - -The macro downloads the files to the appropriate folder. After you click Finish, you must close OpenOffice.org software (including the Quickstarter), and restart. - - -Setting UI Language -A standard installation of OpenOffice.org software will give you a user interface (UI) of your chosen language. -Most users download the American English version, which gives you English menu commands and English application help. If you want another language for the menus (and for the application help, if available in that language), change the UI language as follows. - - -Choose Tools - Options - Language Settings - Languages. - - -Select another UI language in the "User interface" listbox. - - -Click OK and restart the OpenOffice.org software. - - -If the listbox doesn't list the language that you want, see "Adding More UI Languages". - - -Adding More UI Languages - - -Open your Web browser and enter http://oootranslation.services.openoffice.org/pub/OpenOffice.org/ - - -Select and download the correct language pack for your version of OpenOffice.org software. - - -Close OpenOffice.org software (also close the Quickstarter, if you enabled it). - - -Install the language pack. Either double-click the exe file, or unpack the tar.gz file according to standard practice on your platform. - - - -Tools - Options - Language Settings - Languages -Format - Character - Font - - + The language you select for your document determines the dictionary used for spellcheck, thesaurus and hyphenation, the decimal and thousands delimiter used and the default currency format. + + + The language you select applies to the whole document. + + + Within the document, you can apply a separate language to any paragraph style. This has priority over the language of the whole document. + + + You can assign a language to selected pieces of text in a paragraph, either by direct formatting or with a character style. This assignment has priority over the paragraph style and document language. + + + Selecting a language for the whole document + + + Choose Tools - Options. Go to Language Settings - Languages. + + + Under Default languages for documents, select the document language for all newly created documents. If you mark For the current document only, your choice will only apply to the current document. Close the dialog with OK. + + + Selecting a language for a Paragraph Style + + + Place the cursor in the paragraph whose paragraph style you want to edit. + + + Open the context menu and select Edit Paragraph Style. This opens the Paragraph Style dialog. + + + Select the Font tab. + + + Select the Language and click OK. + All paragraphs formatted with the current paragraph style will have the selected language. + + + Applying a language directly to selected text + + + Select the text to which you want to apply a language. + + + Choose Format - Character. This opens the Character dialog. + + + Select the Font tab. + + + Select the Language and click OK. + + + In %PRODUCTNAME Calc, choose Format - Cells and proceed accordingly. + Selecting a language for a Character Style + + + Open the Styles and Formatting window and click on the Character Styles icon. + + + Click on the name of the character style to which you want to apply a different language. + + + Then open the context menu in the Styles and Formatting window and select Modify. This opens the Character Style dialog. + + + Select the Font tab. + + + Select the Language and click OK. + Now you can apply the character style to your selected text. + + UFI: see i76182 +Adding More Text Languages + + + Dictionaries are supplied and installed as extensions. Choose Tools - Language - More Dictionaries Online to open the dictionaries page in your default web browser. + + + Select a dictionary in the list of descriptions. Click the heading in a dictionary description that you want to get. + + + In the next page, click the Get It icon to download the dictionary extension. Note the folder name to which your browser downloads the file. Download additional dictionaries as you like. + + + In %PRODUCTNAME, choose Tools - Extension Manager and click Add to install the downloaded extensions. + + + After you installed the extensions, you should close %PRODUCTNAME (including the Quickstarter), and restart. + + + Setting UI Language + A standard installation of %PRODUCTNAME software will give you a user interface (UI) of your chosen language. + Most users download the American English version, which gives you English menu commands and English application help. If you want another language for the menus (and for the application help, if available in that language), change the UI language as follows. + + + Choose Tools - Options - Language Settings - Languages. + + + Select another UI language in the "User interface" listbox. + + + Click OK and restart the OpenOffice.org software. + + + If the listbox doesn't list the language that you want, see "Adding More UI Languages". + + + Adding More UI Languages + + + Open your Web browser and enter http://wiki.services.openoffice.org/wiki/Download_OpenOffice.org_LanguagePacks + + + Select and download the correct language pack for your version of %PRODUCTNAME software. + + + Close %PRODUCTNAME software (also close the Quickstarter, if you enabled it). + + + Install the language pack. Either double-click the exe file, or unpack the tar.gz file according to standard practice on your platform. + + + + Tools - Options - Language Settings - Languages + Format - Character - Font + + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/guide/makefile.mk b/helpcontent2/source/text/shared/guide/makefile.mk index 3bfdd7593b..ff84521cbb 100644 --- a/helpcontent2/source/text/shared/guide/makefile.mk +++ b/helpcontent2/source/text/shared/guide/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.14.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/shared/guide/numbering_stop.xhp b/helpcontent2/source/text/shared/guide/numbering_stop.xhp index 05d81143f9..023707e4b2 100644 --- a/helpcontent2/source/text/shared/guide/numbering_stop.xhp +++ b/helpcontent2/source/text/shared/guide/numbering_stop.xhp @@ -1,8 +1,8 @@ - - + + + - - -Turning off Bullets and Numbering for Individual Paragraphs -/text/shared/guide/numbering_stop.xhp - - -Sun Microsystems, Inc. -converted from old format - fpe - - - + + Turning off Bullets and Numbering for Individual Paragraphs + /text/shared/guide/numbering_stop.xhp + + + numbering; turning off -bullets; turning off -removing, see also deleting -removing;bullets and numbering -keyboard;removing numbering + bullets; turning off + removing, see also deleting + removing;bullets and numbering + keyboard;removing numbering MW added "removing, see also deleting" -Turning off Bullets and Numbering for Individual Paragraphs +Turning off Bullets and Numbering for Individual Paragraphs +no bullets for Calc +Bullets and Numbering of paragraphs is supported only in Writer, Impress and Draw. + +no bullets for Mathdon't care for Math by now. Issue 98726 + - - - -Icon + + + +Icon - -Icon + +Icon - - -For the current paragraph or selected paragraphs you can switch off the automatic numbering or listing. Click the Numbering Off icon in the Bullets and Numbering bar. - - -
+ + + For the current paragraph or selected paragraphs you can switch off the automatic numbering or listing. Click the Numbering Off icon in the Bullets and Numbering bar. + + + - +Impress, Draw - - - -Icon + + + +Icon - - -If the cursor is located within a numbered or bulleted list, you can turn off automatic numbers or bullets for the current paragraph or selected paragraphs by clicking the Bullets On/Off icon on the Text Formatting bar. - - -
+ + + If the cursor is located within a numbered or bulleted list, you can turn off automatic numbers or bullets for the current paragraph or selected paragraphs by clicking the Bullets On/Off icon on the Text Formatting bar. + + + -To remove numbering from a paragraph using the keyboard: +To remove numbering from a paragraph using the keyboard: - - -Place the cursor at the beginning of a numbered paragraph and press the Backspace key. + + + Place the cursor at the beginning of a numbered paragraph and press the Backspace key. - - -The numbering of the paragraph disappears and is removed from the numbering sequence. Numbering resumes in the following paragraph. + + + The numbering of the paragraph disappears and is removed from the numbering sequence. Numbering resumes in the following paragraph. - - -If you press the Enter key in an empty numbered paragraph, the numbering stops. + + + If you press the Enter key in an empty numbered paragraph, the numbering stops. -
-Format - Bullets and Numbering - - - - - - -
- - +
+ Format - Bullets and Numbering + + + + + + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/guide/paintbrush.xhp b/helpcontent2/source/text/shared/guide/paintbrush.xhp index bbd77b9aba..b04d3b4ad5 100755 --- a/helpcontent2/source/text/shared/guide/paintbrush.xhp +++ b/helpcontent2/source/text/shared/guide/paintbrush.xhp @@ -60,7 +60,7 @@ On the Standard Bar, click the Format Paintbrush icon. The cursor changes to a paint bucket. If you want to apply the formatting to more than one selection, double-click the Format Paintbrush icon -{ENTER ALTERNATE DESCRIPTION HERE} +Icon . After you apply all the formatting, click the icon again. diff --git a/helpcontent2/source/text/shared/makefile.mk b/helpcontent2/source/text/shared/makefile.mk index 8f5dba7586..7b2246ad9f 100644 --- a/helpcontent2/source/text/shared/makefile.mk +++ b/helpcontent2/source/text/shared/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.11.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/shared/optionen/01040400.xhp b/helpcontent2/source/text/shared/optionen/01040400.xhp index 0be229b14a..cbb14aa02f 100644 --- a/helpcontent2/source/text/shared/optionen/01040400.xhp +++ b/helpcontent2/source/text/shared/optionen/01040400.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Print -/text/shared/optionen/01040400.xhp - - - -
+ + Print + /text/shared/optionen/01040400.xhp + + + +
pictures; printing -tables in text; printing -drawings; printing in text documents -controls; printing -backgrounds; printing -printing; elements in text documents -text documents; print settings -printing; text always in black -black printing in Calc -printing; left/right pages -even/odd pages;printing -printing; text in reverse order -reversing printing order -brochures; printing several -printing; brochures -notes; printing in text -printing; creating individual jobs -faxes;selecting a fax machine + tables in text; printing + drawings; printing in text documents + controls; printing + backgrounds; printing + printing; elements in text documents + text documents; print settings + printing; text always in black + black printing in Calc + printing; left/right pages + even/odd pages;printing + printing; text in reverse order + reversing printing order + brochures; printing several + printing; brochures + notes; printing in text + printing; creating individual jobs + faxes;selecting a fax machine mw made "fax machine selection" a two level entry -Print -Specifies print settings within a text or HTML document. -
-
- -
-The print settings defined on this tab page apply to all subsequent documents. If you only want to change the settings for the current document, use the Options button in the File - Print dialog. -Contents -Specifies which document contents are to be printed. -Graphics -Specifies whether the graphics of your text document are printed. -Tables -Specifies whether the tables of the text document are printed. -Drawings (not for HTML documents) -Specifies whether graphics created with $[officename] drawing functions are printed. -Controls -Specifies whether the form control fields of the text document are printed. -Background -Specifies whether to include colors and objects that are inserted to the background of the page (Format - Page - Background) in the printed document.UFI: fixes #i21977# -Print black -Specifies whether to always print text in black. -Hidden text -Enable this option to print text that is marked as hidden. The following hidden text is printed: text that is formatted as hidden by Format - Character - Font Effects - Hidden, and the text fields Hidden text and Hidden paragraphs.UFI: sorry, due to a bug no links allowed in extended help text -Text placeholder -Enable this option to print text placeholders. Disable this option to leave the text placeholders blank in the printout.Text placeholders are fields. -Pages -Defines the print order for $[officename] Writer documents with multiple pages. -Left pages (not for HTML documents) -Specifies whether to print all left pages of the document. -Right pages (not for HTML documents) -Specifies whether to print all right pages of the document. -Reversed -Specifies whether to reverse the printing order. The last page of the document will then be the first one printed. -Brochure -Select the Brochure option to print your document in brochure format. The brochure format is as follows in $[officename] Writer: -
-If you print a document in portrait on a landscape page, two opposing sides in a brochure will be printed next to each other. If you have a printer with double-sided printing capability, you can create an entire brochure from your document without having to collate the pages later. If you have a printer that only has single-sided printing capability, you can achieve this effect by first printing the front pages with the Right pages option marked, then re-inserting the entire paper stack in your printer and printing all the back pages with the Left pages option marked. -
-Right to left -Check to print the pages of the brochure in the correct order for a right-to-left script. -Notes -None -Specifies that notes in your document are not printed. -Notes only -Specifies that notes in your document are printed, but not the actual text. -End of document -Specifies that notes are printed at the end of the document, after the actual text. -End of page -Specifies that notes are printed on an extra page that follows each page containing notes. -Other -Print automatically inserted blank pages -If this option is enabled, automatically-inserted blank pages are being printed. This is best if you are printing double-sided. For example, in a book, a "chapter" paragraph style has been set to always start with an odd numbered page. If the previous chapter ends on an odd page, %PRODUCTNAME inserts an even numbered blank page. This option controls whether to print that even numbered page or not. -Create single print jobs -Specifies that each new print job will begin on a new page even if you are using a duplex printer. If this field is not checked then it is possible that the first page of the second copy is printed on the reverse side of the last page of the first copy, especially if there are an odd number of pages. -Paper tray from printer settings -For printers with multiple trays, the Paper tray from printer settings option specifies whether the paper tray used is specified by the system settings of the printer. -Fax -If you have installed fax software on your computer and wish to fax directly from the text document, select the desired fax machine. -
- -
- - + +Print + Specifies print settings within a text or HTML document. +
+
+ +
+ The print settings defined on this tab page apply to all subsequent documents. If you only want to change the settings for the current document, use the Options button in the File - Print dialog. + Contents + Specifies which document contents are to be printed. + +Graphics + Specifies whether the graphics of your text document are printed. + +Tables + Specifies whether the tables of the text document are printed. + +Drawings (not for HTML documents) + Specifies whether graphics created with $[officename] drawing functions are printed. + +Controls + Specifies whether the form control fields of the text document are printed. + +Background + Specifies whether to include colors and objects that are inserted to the background of the page (Format - Page - Background) in the printed document.UFI: fixes #i21977# + +Print black + Specifies whether to always print text in black. + +Hidden text + Enable this option to print text that is marked as hidden. The following hidden text is printed: text that is formatted as hidden by Format - Character - Font Effects - Hidden, and the text fields Hidden text and Hidden paragraphs.UFI: sorry, due to a bug no links allowed in extended help text + +Text placeholder + Enable this option to print text placeholders. Disable this option to leave the text placeholders blank in the printout.Text placeholders are fields. + Pages + Defines the print order for $[officename] Writer documents with multiple pages. + +Left pages (not for HTML documents) + Specifies whether to print all left (even numbered) pages of the document. + +Right pages (not for HTML documents) + Specifies whether to print all right (odd numbered) pages of the document. + +Reversed + Specifies whether to reverse the printing order. The last page of the document will then be the first one printed. + +Brochure + Select the Brochure option to print your document in brochure format. The brochure format is as follows in $[officename] Writer: +
+ If you print a document in portrait on a landscape page, two opposing sides in a brochure will be printed next to each other. If you have a printer with double-sided printing capability, you can create an entire brochure from your document without having to collate the pages later. If you have a printer that only has single-sided printing capability, you can achieve this effect by first printing the front pages with the Right pages option marked, then re-inserting the entire paper stack in your printer and printing all the back pages with the Left pages option marked. +
+ +Right to left + Check to print the pages of the brochure in the correct order for a right-to-left script. + Notes + +None + Specifies that notes in your document are not printed. + +Notes only + Specifies that notes in your document are printed, but not the actual text. + +End of document + Specifies that notes are printed at the end of the document, after the actual text. + +End of page + Specifies that notes are printed on an extra page that follows each page containing notes. + Other + +Print automatically inserted blank pages + If this option is enabled, automatically-inserted blank pages are being printed. This is best if you are printing double-sided. For example, in a book, a "chapter" paragraph style has been set to always start with an odd numbered page. If the previous chapter ends on an odd page, %PRODUCTNAME inserts an even numbered blank page. This option controls whether to print that even numbered page or not. + +Create single print jobs + Specifies that each new print job will begin on a new page even if you are using a duplex printer. If this field is not checked then it is possible that the first page of the second copy is printed on the reverse side of the last page of the first copy, especially if there are an odd number of pages. + +Paper tray from printer settings + For printers with multiple trays, the "Paper tray from printer settings" option specifies whether the paper tray used is specified by the system settings of the printer. + +Fax + If you have installed fax software on your computer and wish to fax directly from the text document, select the desired fax machine. +
+ +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/optionen/01130200.xhp b/helpcontent2/source/text/shared/optionen/01130200.xhp index 2fa1eb0190..8d17cf6967 100755 --- a/helpcontent2/source/text/shared/optionen/01130200.xhp +++ b/helpcontent2/source/text/shared/optionen/01130200.xhp @@ -1,7 +1,8 @@ - - - + ************************************************************************ + --> + + - -Microsoft Office -/text/shared/optionen/01130200.xhp - - -Sun Microsystems, Inc. -converted from old format - fpe - - - - - -
- Microsoft Office - Specifies the settings for importing and exporting Microsoft Office OLE objects. -
- These settings are valid when no Microsoft OLE server exists (for example, in UNIX) or when there is no $[officename] OLE server ready for editing the OLE objects. -
- -
- List Box - The List Box field displays the entries for the pair of OLE objects that can be converted when loading into $[officename] (L) and/or when saving into a Microsoft format (S). - Mark the box in the [L] column in front of the entry if a Microsoft OLE object is to be converted into the specified $[officename] OLE object when a Microsoft document is loaded into $[officename]. - Mark the box in the [S] column in front of the entry if a $[officename] OLE object is to be converted into the specified Microsoft OLE object when a document is saved in a Microsoft file format. - - + + Microsoft Office + /text/shared/optionen/01130200.xhp + + + +
+ Microsoft Office + Specifies the settings for importing and exporting Microsoft Office OLE objects. +
+ These settings are valid when no Microsoft OLE server exists (for example, in UNIX) or when there is no $[officename] OLE server ready for editing the OLE objects. + If an OLE server is active for the embedded object, then the OLE server will be used to handle the object. + If no OLE server is active for MathType objects, then embedded MathType objects can be converted to %PRODUCTNAME Math objects. For this conversion, the embedded MathType objects must not exceed the MathType 3.1 specifications.mail answer by Thomas Lange re i97686 +
+ +
+ +List Box + The List Box field displays the entries for the pair of OLE objects that can be converted when loading into $[officename] (L) and/or when saving into a Microsoft format (S). + Mark the box in the [L] column in front of the entry if a Microsoft OLE object is to be converted into the specified $[officename] OLE object when a Microsoft document is loaded into $[officename]. + Mark the box in the [S] column in front of the entry if a $[officename] OLE object is to be converted into the specified Microsoft OLE object when a document is saved in a Microsoft file format. + + \ No newline at end of file diff --git a/helpcontent2/source/text/shared/optionen/makefile.mk b/helpcontent2/source/text/shared/optionen/makefile.mk index 88d6249ab3..4226bd978d 100644 --- a/helpcontent2/source/text/shared/optionen/makefile.mk +++ b/helpcontent2/source/text/shared/optionen/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.13.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/shared/optionen/online_update.xhp b/helpcontent2/source/text/shared/optionen/online_update.xhp index 7e4398329d..29519ff604 100644 --- a/helpcontent2/source/text/shared/optionen/online_update.xhp +++ b/helpcontent2/source/text/shared/optionen/online_update.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Online Update -/text/shared/optionen/online_update.xhp - - - -
+ + Online Update + /text/shared/optionen/online_update.xhp + + + +
update options -online update options -options;online update -online updates; checking automatically -updates; checking automatically + online update options + options;online update + online updates; checking automatically + updates; checking automatically + Internet; checking for updates -Online Update -Specifies some options for the automatic notification and downloading of online updates to %PRODUCTNAME. -
-
- -
-Check for updates automatically -Mark to check for online updates periodically, then select the time interval how often %PRODUCTNAME will check for online updates. %PRODUCTNAME will check once a day, week, or month, as soon as a working Internet connection is detected. If you connect to the Internet by a proxy server, set the proxy on Tools - Options - Internet - Proxy. -When an update is available, an icon in the menu bar displays some explaining text. Click the icon to proceed. -If you disable the check, the icon is removed from the menu bar. -Online Update is a module that can be selected or deselected to be installed. Choose the customized installation in the Setup of %PRODUCTNAME. -Every Day -A check will be performed once a day. -Every Week -A check will be performed once a week. This is the default setting. -Every Month -A check will be performed once a month. -Check now -A check will be performed now.Autodownload help id is in shared/01/online_update.xhpDownload updates automatically -Select to download an available online update file automatically to the specified folder. -Download destination -Displays the selected folder to store the downloaded files. -Change -Click to show a dialog box where you can select another folder. - - +Online Update + Specifies some options for the automatic notification and downloading of online updates to %PRODUCTNAME. +
+
+ +
+ +Check for updates automatically + Mark to check for online updates periodically, then select the time interval how often %PRODUCTNAME will check for online updates. %PRODUCTNAME will check once a day, week, or month, as soon as a working Internet connection is detected. If you connect to the Internet by a proxy server, set the proxy on Tools - Options - Internet - Proxy. + When an update is available, an icon in the menu bar displays some explaining text. Click the icon to proceed. + If you disable the check, the icon is removed from the menu bar. + Online Update is a module that can be selected or deselected to be installed. Choose the customized installation in the Setup of %PRODUCTNAME. + +Every Day + A check will be performed once a day. + +Every Week + A check will be performed once a week. This is the default setting. + +Every Month + A check will be performed once a month. + +Check now + A check will be performed now.Autodownload help id is in shared/01/online_update.xhp +Download updates automatically + Select to download an available online update file automatically to the specified folder. + Download destination + Displays the selected folder to store the downloaded files. + Change + Click to show a dialog box where you can select another folder. + + \ No newline at end of file diff --git a/helpcontent2/source/text/simpress/00/makefile.mk b/helpcontent2/source/text/simpress/00/makefile.mk index 34c0e389fe..5cc7b37abe 100644 --- a/helpcontent2/source/text/simpress/00/makefile.mk +++ b/helpcontent2/source/text/simpress/00/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/simpress/01/02120000.xhp b/helpcontent2/source/text/simpress/01/02120000.xhp index 72418a663c..d6a9bccdd9 100644 --- a/helpcontent2/source/text/simpress/01/02120000.xhp +++ b/helpcontent2/source/text/simpress/01/02120000.xhp @@ -59,7 +59,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon diff --git a/helpcontent2/source/text/simpress/01/makefile.mk b/helpcontent2/source/text/simpress/01/makefile.mk index 4b08f2a41a..51941ebf70 100644 --- a/helpcontent2/source/text/simpress/01/makefile.mk +++ b/helpcontent2/source/text/simpress/01/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.10.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/simpress/02/10030200.xhp b/helpcontent2/source/text/simpress/02/10030200.xhp index 5e7cc7a4f1..6e9e7bedda 100644 --- a/helpcontent2/source/text/simpress/02/10030200.xhp +++ b/helpcontent2/source/text/simpress/02/10030200.xhp @@ -58,7 +58,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -75,7 +75,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -92,7 +92,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -109,7 +109,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -126,7 +126,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -143,7 +143,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -160,7 +160,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -177,7 +177,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -194,7 +194,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -211,7 +211,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -228,7 +228,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -245,7 +245,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon diff --git a/helpcontent2/source/text/simpress/02/10100000.xhp b/helpcontent2/source/text/simpress/02/10100000.xhp index eb7cc6998f..c74e939d70 100644 --- a/helpcontent2/source/text/simpress/02/10100000.xhp +++ b/helpcontent2/source/text/simpress/02/10100000.xhp @@ -49,7 +49,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -85,7 +85,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -102,7 +102,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -119,7 +119,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -136,7 +136,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -153,7 +153,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -170,7 +170,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -187,7 +187,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -204,7 +204,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -221,7 +221,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -238,7 +238,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -255,7 +255,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -272,7 +272,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -289,7 +289,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -306,7 +306,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -323,7 +323,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -340,7 +340,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -357,7 +357,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -374,7 +374,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -391,7 +391,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -408,7 +408,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -425,7 +425,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -442,7 +442,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -459,7 +459,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -476,7 +476,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -493,7 +493,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -510,7 +510,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -527,7 +527,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -544,7 +544,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon diff --git a/helpcontent2/source/text/simpress/02/makefile.mk b/helpcontent2/source/text/simpress/02/makefile.mk index aeaaa92ef5..c74dac40d3 100644 --- a/helpcontent2/source/text/simpress/02/makefile.mk +++ b/helpcontent2/source/text/simpress/02/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.10.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/simpress/04/makefile.mk b/helpcontent2/source/text/simpress/04/makefile.mk index 80f3816836..f88037633d 100644 --- a/helpcontent2/source/text/simpress/04/makefile.mk +++ b/helpcontent2/source/text/simpress/04/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/simpress/guide/makefile.mk b/helpcontent2/source/text/simpress/guide/makefile.mk index 0cd15d045b..2432a52653 100644 --- a/helpcontent2/source/text/simpress/guide/makefile.mk +++ b/helpcontent2/source/text/simpress/guide/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.10.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/simpress/main0104.xhp b/helpcontent2/source/text/simpress/main0104.xhp index 4f894cec2e..6f5d84b5d3 100755 --- a/helpcontent2/source/text/simpress/main0104.xhp +++ b/helpcontent2/source/text/simpress/main0104.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Insert -/text/simpress/main0104.xhp - - - -
-Insert -This menu contains the commands that are used to insert new elements into the document, for example, graphics, objects, special characters and other files. -
-Slide - - - - -Page Number -Adds the slide number or the page number. -Date and Time -Adds the date and time as a field. - -Special Character - - -Hyperlink - -Animated ImageUFI: renamed and moved from main0114, spec "presentation engine for q" - -Table - - - - -Chart -Floating Frame - -File - - - + + Insert + /text/simpress/main0104.xhp + + + +
+ +Insert + This menu contains the commands that are used to insert new elements into the document, for example, graphics, objects, special characters and other files. +
+ Slide + + + + + Page Number + Adds the slide number or the page number. + Date and Time + Adds the date and time as a field. + + Special Character + + + Hyperlink + + Animated ImageUFI: renamed and moved from main0114, spec "presentation engine for q" + + Table + + + + + Chart + Inserts a chart. + Floating Frame + + File + + + \ No newline at end of file diff --git a/helpcontent2/source/text/simpress/main0203.xhp b/helpcontent2/source/text/simpress/main0203.xhp index 199a80a264..2ed9a2182e 100644 --- a/helpcontent2/source/text/simpress/main0203.xhp +++ b/helpcontent2/source/text/simpress/main0203.xhp @@ -1,7 +1,8 @@ - - - + ************************************************************************ + --> + - - -Text Formatting Bar -/text/simpress/main0203.xhp - - -Sun Microsystems, Inc. -converted from old format - fpe - - - -
-Text Formatting Bar -To display the Text Formatting Bar, place the cursor inside a text object. -
- - - - - - - - - - -Font Color - - - - - - - - - - - - - - + + Text Formatting Bar + /text/simpress/main0203.xhp + + + +
+ Text Formatting Bar + To display the Text Formatting Bar, place the cursor inside a text object. +
+ + + + + + + + + + + Font Color + + + + + + + + + + + + + + @@ -95,9 +94,8 @@ - - - + + @@ -130,13 +128,13 @@ -Character - - -Paragraph - - -Numbering Symbols +Character + + + Paragraph + + + Numbering Symbols @@ -145,11 +143,16 @@ - - - - - - - - + + + + + + +Increase Font + Increases the font size of the selected text. + +Reduce Font + Reduces the font size of the selected text. + + \ No newline at end of file diff --git a/helpcontent2/source/text/simpress/makefile.mk b/helpcontent2/source/text/simpress/makefile.mk index aa079f444a..81c3cd5f85 100644 --- a/helpcontent2/source/text/simpress/makefile.mk +++ b/helpcontent2/source/text/simpress/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/smath/00/makefile.mk b/helpcontent2/source/text/smath/00/makefile.mk index 9e3797e301..db5d509b27 100644 --- a/helpcontent2/source/text/smath/00/makefile.mk +++ b/helpcontent2/source/text/smath/00/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/smath/01/03090600.xhp b/helpcontent2/source/text/smath/01/03090600.xhp index bcd83976a8..5c2e9bcef5 100644 --- a/helpcontent2/source/text/smath/01/03090600.xhp +++ b/helpcontent2/source/text/smath/01/03090600.xhp @@ -1,8 +1,8 @@ - - + + + - - -Attributes -/text/smath/01/03090600.xhp - - -Sun Microsystems, Inc. -converted from old format - fpe - - - -
+ + Attributes + /text/smath/01/03090600.xhp + + + +
attributes; in %PRODUCTNAME Math -formulas; attributes in -accents; in %PRODUCTNAME Math -attributes; accents -vector arrows as attributes -tilde as attribute -circumflex attribute -bold attribute -italic attribute in %PRODUCTNAME Math -resizing;fonts -scaling;fonts -attributes; changing fonts -changing; fonts -attributes; colored characters -colored characters -attributes; changing defaults -circle attribute -double dot attribute -dot attribute -line through attribute -line above attribute -reversed circumflex attribute -overline attribute -wide vector arrow attribute -wide tilde attribute -wide circumflex attribute -underline attribute -triple dot attribute -transparent character as attribute + formulas; attributes in + accents; in %PRODUCTNAME Math + attributes; accents + vector arrows as attributes + tilde as attribute + circumflex attribute + bold attribute + italic attribute in %PRODUCTNAME Math + resizing;fonts + scaling;fonts + attributes; changing fonts + changing; fonts + attributes; colored characters + colored characters + attributes; changing defaults + circle attribute + double dot attribute + dot attribute + line through attribute + line above attribute + reversed circumflex attribute + overline attribute + wide vector arrow attribute + wide tilde attribute + wide circumflex attribute + underline attribute + triple dot attribute + transparent character as attribute mw added "scaling;fonts" -Attributes -You can choose from various attributes for %PRODUCTNAME -Math formulas. Some attributes are displayed in the lower part of the Selection window. These attributes are also listed in the context menu of the Commands window. All attributes not contained in the Selection window or in the context menu must be typed manually in the Commands window. -
-
- -
-The following is a complete list of all attributes available in %PRODUCTNAME Math. The symbol next to the attribute indicates that it can be accessed through the Selection window (choose View - Selection) or through the context menu of the Commands window. -In describing the following attribute functions, the letter "a" in the icon refers to the placeholder that you would like to assign to the respective attribute. You can substitute this character with any other character that you choose. -Attribute Functions - - - - -Icon +Attributes + + You can choose from various attributes for %PRODUCTNAME + Math formulas. Some attributes are displayed in the lower part of the Selection window. These attributes are also listed in the context menu of the Commands window. All attributes not contained in the Selection window or in the context menu must be typed manually in the Commands window. + +
+ +
+ The following is a complete list of all attributes available in %PRODUCTNAME Math. The symbol next to the attribute indicates that it can be accessed through the Selection window (choose View - Selection) or through the context menu of the Commands window. + In describing the following attribute functions, the letter "a" in the icon refers to the placeholder that you would like to assign to the respective attribute. You can substitute this character with any other character that you choose. + Attribute Functions +
+ + + +Icon - -Acute accent -Inserts a placeholder with an acute accent. You can also type acute <?> in the Commands window. - - -
+ + Acute accent + Inserts a placeholder with an acute accent. You can also type acute <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Grave accent -Inserts a placeholder with a grave accent (grave). You can also type grave <?> in the Commands window. - - -
+ + Grave accent + Inserts a placeholder with a grave accent (grave). You can also type grave <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Reverse Circumflex -Inserts a placeholder with a reverse circumflex ("checkmark") over it. You can also type check <?> in the Commands window. - - -
+ + Reverse Circumflex + Inserts a placeholder with a reverse circumflex ("checkmark") over it. You can also type check <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Breve -Inserts a placeholder with an accent breve. You can also type breve <?> in the Commands window. - - -
+ + Breve + Inserts a placeholder with an accent breve. You can also type breve <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Circle -Inserts a placeholder with a circle over it. You can also type circle <?> in the Commands window. - - -
+ + Circle + Inserts a placeholder with a circle over it. You can also type circle <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Vector arrow -Inserts a placeholder with a vector arrow. You can also type vec <?> in the Commands window. - - -
+ + Vector arrow + Inserts a placeholder with a vector arrow. You can also type vec <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Tilde -Inserts a placeholder with a tilde. You can also type tilde <?> in the Commands window. - - -
+ + Tilde + Inserts a placeholder with a tilde. You can also type tilde <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Circumflex -Inserts a placeholder with a circumflex ("hat"). You can also directly enter hat <?> in the Commands window. - - -
+ + Circumflex + Inserts a placeholder with a circumflex ("hat"). You can also directly enter hat <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Line above (bar) -Inserts a line ("bar") above a placeholder . You can also type bar <?> in the Commands window. - - -
+ + Line above (bar) + Inserts a line ("bar") above a placeholder . You can also type bar <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Dot -Inserts a placeholder with a dot over it. You can also type dot <?> in the Commands window. - - -
+ + Dot + Inserts a placeholder with a dot over it. You can also type dot <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Wide vector arrow -Inserts a wide vector arrow with a placeholder. You can also type widevec in the Commands window. - - -
+ + Wide vector arrow + Inserts a wide vector arrow with a placeholder. You can also type widevec in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Wide tilde -Inserts a wide tilde with a placeholder. You can also type widetilde directly in the Commands window. - - -
+ + Wide tilde + Inserts a wide tilde with a placeholder. You can also type widetilde directly in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Wide circumflex -Inserts a wide circumflex ("hat") with a placeholder. You can also type widehat in the Commands window. - - -
+ + Wide circumflex + Inserts a wide circumflex ("hat") with a placeholder. You can also type widehat in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Double dot -Inserts a placeholder with two dots over it. You can also directly enter ddot <?> in the Commands window. - - -
+ + Double dot + Inserts a placeholder with two dots over it. You can also directly enter ddot <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Line over -Inserts a line over a placeholder. You can also type overline <?> in the Commands window. The line adjusts itself to correct length. - - -
+ + Line over + Inserts a line over a placeholder. You can also type overline <? + > in the Commands window. The line adjusts itself to correct length. + + + - - - - -Icon +
+ + + +Icon - -Line below -Inserts a line below a placeholder. You can also type underline <?> in the Commands window. - - -
+ + Line below + Inserts a line below a placeholder. You can also type underline <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Line through (overstrike) -Inserts a placeholder with a line (or overstrike) through it. You can also type overstrike <?> in the Commands window. - - -
+ + Line through (overstrike) + Inserts a placeholder with a line (or overstrike) through it. You can also type overstrike <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Triple dot -Inserts three dots over a placeholder. You can also type dddot <?> in the Commands window. - - -
+ + Triple dot + Inserts three dots over a placeholder. You can also type dddot <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Transparent -Inserts a placeholder for a transparent character. This character takes up the space of "a" but does not display it. You can also type phantom <?> in the Commands window. - - -
+ + Transparent + Inserts a placeholder for a transparent character. This character takes up the space of "a" but does not display it. You can also type phantom <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Bold font -Inserts a placeholder with bold formatting. You can also type bold <?> in the Commands window. - - -
+ + Bold font + Inserts a placeholder with bold formatting. You can also type bold <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Italic font -Inserts a placeholder with italic formatting. You can also type ital <?> or italic <?> in the Commands window. - - -
+ + Italic font + Inserts a placeholder with italic formatting. You can also type ital <?> or italic <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Resize -Inserts a command for modifying the font size with two placeholders. The first placeholder refers to the font size (for example, 12) and the second one contains the text. For proper structure, insert a space between the values. You can also directly enter size <?> <?> in the Commands window. - - -
+ + Resize + Inserts a command for modifying the font size with two placeholders. The first placeholder refers to the font size (for example, 12) and the second one contains the text. For proper structure, insert a space between the values. You can also directly enter size <?> <?> in the Commands window. + + + - - - - -Icon +
+ + + +Icon - -Change font -Inserts a command for changing the font type, with two placeholders. Replace the first placeholder with the name of one of the custom fonts, Serif, Sans or Fixed. Replace the second placeholder with the text. You can also type font <?> <?> directly in the Commands window. - - -
+ + Change font + Inserts a command for changing the font type, with two placeholders. Replace the first placeholder with the name of one of the custom fonts, Serif, Sans or Fixed. Replace the second placeholder with the text. You can also type font <?> <?> directly in the Commands window. + + + - Use the color command to change the color of your formula. Type color, then type the color name (the available colors are white, black, cyan, magenta, red, blue, green and yellow), then the formula, character or character sequence. The input color green size 20 a results in a green letter "a" with a font size of 20. -The nbold and nitalic commands remove the bold or italic default fonts of formula components. For example, remove italics from the x in the formula 5 x + 3=28 by typing nitalic before the x as in 5 nitalic x + 3=28. -The attributes "acute", "bar", "breve", "check", "circle", "dot", "ddot", "dddot", "grave", "hat", "tilde" and "vec" have fixed sizes. Their width or length cannot be adjusted when positioned over a long symbol. -For size changes you can use size n, +n, -n, *n and /n , where n is a placeholder. This method is useful when the base size of the formula is subject to change. The commands size +n and size -n change point size, and size *n and size /n change the size by a percentage. For example, the command size *1.17 increases the size of a character by exactly 17%. -Note that some entries require spaces for the correct structure. This is especially true when you specify attributes with fixed values instead of placeholders. -For more information about formatting in %PRODUCTNAME -Math, see Brackets and Grouping. -Information on attributes, indexes and exponents, and scaling can help you structure your documents more efficiently. - - + Use the color command to change the color of your formula. Type color, then type the color name (the available colors are white, black, cyan, magenta, red, blue, green and yellow), then the formula, character or character sequence. The input color green size 20 a results in a green letter "a" with a font size of 20. + The nbold and nitalic commands remove the bold or italic default fonts of formula components. For example, remove italics from the x in the formula 5 x + 3=28 by typing nitalic before the x as in 5 nitalic x + 3=28. + The attributes "acute", "bar", "breve", "check", "circle", "dot", "ddot", "dddot", "grave", "hat", "tilde" and "vec" have fixed sizes. Their width or length cannot be adjusted when positioned over a long symbol. + For size changes you can use size n, +n, -n, *n and /n , where n is a placeholder. This method is useful when the base size of the formula is subject to change. The commands size +n and size -n change point size, and size *n and size /n change the size by a percentage. For example, the command size *1.17 increases the size of a character by exactly 17%. + Note that some entries require spaces for the correct structure. This is especially true when you specify attributes with fixed values instead of placeholders. + For more information about formatting in %PRODUCTNAME + Math, see Brackets and Grouping. + Information on attributes, indexes and exponents, and scaling can help you structure your documents more efficiently. + + \ No newline at end of file diff --git a/helpcontent2/source/text/smath/01/03091506.xhp b/helpcontent2/source/text/smath/01/03091506.xhp index 089b97494d..d32037711a 100644 --- a/helpcontent2/source/text/smath/01/03091506.xhp +++ b/helpcontent2/source/text/smath/01/03091506.xhp @@ -157,7 +157,7 @@ -formulas;in color +formulas;in colorcolors;in formulas The color command changes the character color; first enter the color command directly in the Commands window. Then enter the color name (black, white, cyan, magenta, red, blue, green, or yellow). Then enter the characters to be changed. @@ -411,7 +411,7 @@
- +
diff --git a/helpcontent2/source/text/smath/01/makefile.mk b/helpcontent2/source/text/smath/01/makefile.mk index 0b48a36f61..16dae3b0d6 100644 --- a/helpcontent2/source/text/smath/01/makefile.mk +++ b/helpcontent2/source/text/smath/01/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.9.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/smath/02/makefile.mk b/helpcontent2/source/text/smath/02/makefile.mk index 877cfbf794..ceab9363ed 100644 --- a/helpcontent2/source/text/smath/02/makefile.mk +++ b/helpcontent2/source/text/smath/02/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/smath/04/makefile.mk b/helpcontent2/source/text/smath/04/makefile.mk index ed8b1dd086..79f993e110 100644 --- a/helpcontent2/source/text/smath/04/makefile.mk +++ b/helpcontent2/source/text/smath/04/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/smath/guide/makefile.mk b/helpcontent2/source/text/smath/guide/makefile.mk index 681acddea4..faecf487db 100644 --- a/helpcontent2/source/text/smath/guide/makefile.mk +++ b/helpcontent2/source/text/smath/guide/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.10.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/smath/makefile.mk b/helpcontent2/source/text/smath/makefile.mk index 4b12d5f87d..cb9522c75c 100644 --- a/helpcontent2/source/text/smath/makefile.mk +++ b/helpcontent2/source/text/smath/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/swriter/00/00000404.xhp b/helpcontent2/source/text/swriter/00/00000404.xhp index b81496ce3f..cc12cb2da7 100644 --- a/helpcontent2/source/text/swriter/00/00000404.xhp +++ b/helpcontent2/source/text/swriter/00/00000404.xhp @@ -315,7 +315,7 @@
-Choose Insert - Horizontal Line +Choose Insert - Horizontal Rule
Choose Insert - File diff --git a/helpcontent2/source/text/swriter/00/00000405.xhp b/helpcontent2/source/text/swriter/00/00000405.xhp index e44c305839..6e82565372 100644 --- a/helpcontent2/source/text/swriter/00/00000405.xhp +++ b/helpcontent2/source/text/swriter/00/00000405.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 00000405.xhp,v $ - * $Revision: 1.14.4.1 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.9 $ * * This file is part of OpenOffice.org. * @@ -34,38 +34,38 @@ --> - -Format Menu -/text/swriter/00/00000405.xhp - - - -Format Menu -
-Choose Format - Paragraph - Drop Caps tab -Choose Format - Styles and Formatting - open context menu Modify/New - Drop Caps tab -
-
-Choose Format - Paragraph - Text Flow tab -Choose Format - Styles and Formatting - open context menu Modify/New - Text Flow tab -Choose Edit - Find & Replace - Format - Text Flow tab -
-
-Right-click a paragraph with style Text body. Choose Edit Paragraph Style - Condition tab -
-
-Open Styles and Formatting window. Click the New Style from Selection icon and keep the mouse button pressed. Choose Load Styles from the submenu. -
-
-Choose Format - Page - -Choose Format - Styles and Formatting - open context menu New/Modify (for Page Styles) -
-
-Choose Format - Paragraph - Numbering tab -Choose Format - Styles and Formatting - open context menu Modify/New - Numbering tab (Paragraph Styles) -
-Choose Format - Sections - Options button + + Format Menu + /text/swriter/00/00000405.xhp + + + + Format Menu +
+ Choose Format - Paragraph - Drop Caps tab + Choose Format - Styles and Formatting - open context menu Modify/New - Drop Caps tab +
+
+ Choose Format - Paragraph - Text Flow tab + Choose Format - Styles and Formatting - open context menu Modify/New - Text Flow tab + Choose Edit - Find & Replace - Format - Text Flow tab +
+
+ Right-click a paragraph with style Text body. Choose Edit Paragraph Style - Condition tab +
+
+ Open Styles and Formatting window. Click the New Style from Selection icon and keep the mouse button pressed. Choose Load Styles from the submenu. +
+
+ Choose Format - Page + + Choose Format - Styles and Formatting - open context menu New/Modify (for Page Styles) +
+
+ Choose Format - Paragraph - Numbering tab + Choose Format - Styles and Formatting - open context menu Modify/New - Numbering tab (Paragraph Styles) +
+ Choose Format - Sections - Options button
Choose Format - Page - Columns tab @@ -102,28 +102,28 @@ Choose Format - AutoCorrect - Apply and Edit Changes -Choose Table - AutoFormat (with cursor in a table) + Choose Table - AutoFormat (with cursor in a table) -
-Choose Format - Picture - -Choose Insert - Picture - From File - Properties button -Choose Insert - Picture - From File (when graphics are selected) +
+ Choose Format - Picture + + Choose Insert - Picture - From File - Properties button + Choose Insert - Picture - From File (when graphics are selected) -On the Picture Bar (when pictures are selected), click -
- - - - -{ENTER ALTERNATE DESCRIPTION HERE} + On the Picture Bar (when pictures are selected), click +
+
+ + + +Icon - - -Graphics Properties - - -
+ + + Graphics Properties + + +
@@ -167,17 +167,17 @@
Choose Table - Table Properties -Choose Table - Split Table + Choose Table - Split Table -Choose Table - Merge Tables + Choose Table - Merge Tables -Choose Table - Table Properties - Table tab + Choose Table - Table Properties - Table tab -Choose Table - Table Properties - Columns tab + Choose Table - Table Properties - Columns tab -Choose Table - Table Properties - Text Flow tab + Choose Table - Table Properties - Text Flow tab -Right-click in a table, choose Cell + Right-click in a table, choose Cell
Choose Table - Merge Cells @@ -188,7 +188,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -208,7 +208,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -221,14 +221,14 @@
In the context menu of a cell, choose Cell - Protect -
-In the context menu of a cell, choose Cell - Unprotect - -Open context menu in Navigator for tables -
-In the context menu of a cell, choose Row +
+ In the context menu of a cell, choose Cell - Unprotect + + Open context menu in Navigator for tables +
+ In the context menu of a cell, choose Row -In the context menu of a cell, choose Row - Height + In the context menu of a cell, choose Row - Height
Choose Table - Autofit - Optimal Row Height @@ -239,14 +239,14 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon - - -Optimal Row Height - - - + + + Optimal Row Height + + +
@@ -259,7 +259,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -281,21 +281,21 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon - - -Delete Row - - - + + + Delete Row + + + -
-
-In the context menu of a cell, choose Column +
+
+ In the context menu of a cell, choose Column -In the context menu of a cell, choose Column -- Width + In the context menu of a cell, choose Column + - Width
Choose Table - Autofit - Optimal Column Width @@ -306,14 +306,14 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon - - -Optimal Column Width - - - + + + Optimal Column Width + + +
@@ -326,7 +326,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -349,7 +349,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -359,14 +359,14 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon - - -Insert Row - - - + + + Insert Row + + +
@@ -378,14 +378,14 @@ -{ENTER ALTERNATE DESCRIPTION HERE} + - - -Delete Column - - - + + + Delete Column + + +
@@ -397,14 +397,14 @@ -{ENTER ALTERNATE DESCRIPTION HERE} + - - -Object Properties - - - + + + Object Properties + + +
@@ -413,18 +413,18 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon - - -Frame Properties - - - + + + Frame Properties + + + -
-
-Menu Format - Page - tab Text Grid, if Asian language support is enabled -
- - +
+
+ Menu Format - Page - tab Text Grid, if Asian language support is enabled +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/swriter/00/makefile.mk b/helpcontent2/source/text/swriter/00/makefile.mk index ed5a45b95b..d1fae4a46f 100644 --- a/helpcontent2/source/text/swriter/00/makefile.mk +++ b/helpcontent2/source/text/swriter/00/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/swriter/01/04070000.xhp b/helpcontent2/source/text/swriter/01/04070000.xhp index 5004874fe7..7a0755dade 100644 --- a/helpcontent2/source/text/swriter/01/04070000.xhp +++ b/helpcontent2/source/text/swriter/01/04070000.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Envelope -/text/swriter/01/04070000.xhp - - - + + Envelope + /text/swriter/01/04070000.xhp + + + inserting;envelopes -letters;inserting envelopes -envelopes;inserting -mw corrected a typo in "letters;..." + letters;inserting envelopes + envelopes +MW made "envelopes;" a one level entry -Envelope -Creates an envelope. On three tab pages, you can specify the addressee and sender, the position and format for both addresses, the size of the envelope, and the envelope orientation. + +Envelope + Creates an envelope. On three tab pages, you can specify the addressee and sender, the position and format for both addresses, the size of the envelope, and the envelope orientation. -
- -
- - - -New doc. -Creates a new document and inserts the envelope. -Insert -Inserts the envelope before the current page in the document. The envelope is formatted with the Envelope page style. - -To delete an envelope from a document - - -Click into the envelope page to make it the current page. - - -Right-click the field on the status line that shows "Envelope". -A submenu opens showing some page styles. - - -Choose the "Default" page style from the submenu. -This removes the special "Envelope" page formatting. - - -Delete the frames for sender and recipient. Click the border of each frame and press the Del key. - - - - +
+ +
+ + + + +New doc. + Creates a new document and inserts the envelope. + +Insert + Inserts the envelope before the current page in the document. The envelope is formatted with the Envelope page style. + + To delete an envelope from a document + + + Click into the envelope page to make it the current page. + + + Right-click the field on the status line that shows "Envelope". + A submenu opens showing some page styles. + + + Choose the "Default" page style from the submenu. + This removes the special "Envelope" page formatting. + + + Delete the frames for sender and recipient. Click the border of each frame and press the Del key. + + + + \ No newline at end of file diff --git a/helpcontent2/source/text/swriter/01/04090005.xhp b/helpcontent2/source/text/swriter/01/04090005.xhp index b3fe90aa31..e76c2d4ba8 100644 --- a/helpcontent2/source/text/swriter/01/04090005.xhp +++ b/helpcontent2/source/text/swriter/01/04090005.xhp @@ -190,7 +190,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon diff --git a/helpcontent2/source/text/swriter/01/04210000.xhp b/helpcontent2/source/text/swriter/01/04210000.xhp index 12a448fc70..14fa6bd5e6 100644 --- a/helpcontent2/source/text/swriter/01/04210000.xhp +++ b/helpcontent2/source/text/swriter/01/04210000.xhp @@ -38,13 +38,13 @@ -Insert Horizontal Ruler +Insert Horizontal Rule /text/swriter/01/04210000.xhp -Insert Horizontal Ruler +Insert Horizontal Rule Inserts a horizontal line at the current cursor position.
diff --git a/helpcontent2/source/text/swriter/01/05040500.xhp b/helpcontent2/source/text/swriter/01/05040500.xhp index 6a6ee02e7b..20550bb0ca 100644 --- a/helpcontent2/source/text/swriter/01/05040500.xhp +++ b/helpcontent2/source/text/swriter/01/05040500.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 05040500.xhp,v $ - * $Revision: 1.9.4.1 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.8 $ * * This file is part of OpenOffice.org. * @@ -35,100 +35,116 @@ - -Columns -/text/swriter/01/05040500.xhp - - - -
+ + Columns + /text/swriter/01/05040500.xhp + + + +
-Columns -Specifies the number of columns and the column layout for a page style, frame, or section. + +added two Help IDs, see i97180 +Columns + Specifies the number of columns and the column layout for a page style, frame, or section. -
-
- -
-Default settings -You can select from predefined column layouts, or create your own. When you apply a layout to a page style, all pages that use the style are updated. Similarly, when you apply a column layout to a frame style, all frames that use that style are updated. You can also change the column layout for a single frame. +
+
+ +
+ Default settings + You can select from predefined column layouts, or create your own. When you apply a layout to a page style, all pages that use the style are updated. Similarly, when you apply a column layout to a frame style, all frames that use that style are updated. You can also change the column layout for a single frame. -Columns -Enter the number of columns that you want in the page, frame, or section. -You can also select one of the predefined column layouts. -Selection fields + +Columns + Enter the number of columns that you want in the page, frame, or section. + You can also select one of the predefined column layouts. + Selection fields -Evenly distribute contents to all columns -Distributes the text in multi-column sections. The text flows into all columns to the same height. The height of the section adjusts automatically.Evenly distributes the text in multi-column sections. -Width and spacing -If the Automatic width check box is selected, enter the width and spacing options for the columns. -(Column number) -Displays the column number, as well as width and distance to the adjacent columns. +Evenly distribute contents to all columns + Distributes the text in multi-column sections. The text flows into all columns to the same height. The height of the section adjusts automatically.Evenly distributes the text in multi-column sections. + Width and spacing + If the Automatic width check box is selected, enter the width and spacing options for the columns. + (Column number) + Displays the column number, as well as width and distance to the adjacent columns. -Left Arrow -Moves the column display one column to the left. - - - - -{ENTER ALTERNATE DESCRIPTION HERE} +Left Arrow + Moves the column display one column to the left. +
+ + + +Icon - - -Left Arrow - - -
+ + + Left Arrow + + + -Right Arrow -Moves the column display one column to the right. - - - - -{ENTER ALTERNATE DESCRIPTION HERE} +Right Arrow + Moves the column display one column to the right. +
+ + + +Icon - - -Right Arrow - - -
+ + + Right Arrow + + + -Width -Enter the width of the column. +Width + Enter the width of the column. -Spacing -Enter the amount of space that you want to leave between the columns. +Spacing + Enter the amount of space that you want to leave between the columns. -AutoWidth -Creates columns of equal width. - -The column layout preview only shows the columns and not the surrounding page. -Separator line -This area is only available if your layout contains more than one column. +AutoWidth + Creates columns of equal width. + + The column layout preview only shows the columns and not the surrounding page. + Separator line + This area is only available if your layout contains more than one column. -Line -Select the formatting style for the column separator line. If you do not want a separator line, choose "None". +Line + Select the formatting style for the column separator line. If you do not want a separator line, choose "None". -Height -Enter the length of the separator line as a percentage of the height of the column area. +Height + Enter the length of the separator line as a percentage of the height of the column area. -Position -Select the vertical alignment of the separator line. This option is only available if Height value of the line is less than 100%. +Position + Select the vertical alignment of the separator line. This option is only available if Height value of the line is less than 100%. -Apply to -Select the item that you want to apply the column layout to. This option is only available if you access this dialog by choosing Format - Columns. -
- -
- - +Apply to + Select the item that you want to apply the column layout to. This option is only available if you access this dialog by choosing Format - Columns. +
+ +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/swriter/01/05060200.xhp b/helpcontent2/source/text/swriter/01/05060200.xhp index 7657c504ff..eb2b20aa50 100644 --- a/helpcontent2/source/text/swriter/01/05060200.xhp +++ b/helpcontent2/source/text/swriter/01/05060200.xhp @@ -65,7 +65,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -81,7 +81,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -97,7 +97,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -116,7 +116,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -135,7 +135,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -154,7 +154,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon diff --git a/helpcontent2/source/text/swriter/01/05100300.xhp b/helpcontent2/source/text/swriter/01/05100300.xhp index 6cad99b772..91ec649123 100644 --- a/helpcontent2/source/text/swriter/01/05100300.xhp +++ b/helpcontent2/source/text/swriter/01/05100300.xhp @@ -1,7 +1,8 @@ - - - - + ************************************************************************ + --> + + - -Protect -/text/swriter/01/05100300.xhp - - -Sun Microsystems, Inc. -converted from old format - fpe - - - -
- + + Protect + /text/swriter/01/05100300.xhp + + + +
+ -Protect -Prevents the contents of the selected cells from being modified. -
-
- -
-When the cursor is in a read-only cell, a note appears on the Status Bar. - -To remove cell protection, select the cell(s), and then choose Format - Cell - Remove Protection. - - +Protect + Prevents the contents of the selected cells from being modified. +
+
+ +
+ When the cursor is in a read-only cell, a note appears on the Status Bar. + To remove cell protection, select the cell(s), right-click, and then choose Cell - Unprotect. + + \ No newline at end of file diff --git a/helpcontent2/source/text/swriter/01/05140000.xhp b/helpcontent2/source/text/swriter/01/05140000.xhp index 1ec60f62b8..45c7c0fd67 100644 --- a/helpcontent2/source/text/swriter/01/05140000.xhp +++ b/helpcontent2/source/text/swriter/01/05140000.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Styles and Formatting -/text/swriter/01/05140000.xhp - - - - - -
- - + + Styles and Formatting + /text/swriter/01/05140000.xhp + + + +
Styles and Formatting window;applying styles - - mw deleted "applying;." - +mw deleted "applying;." -Styles and Formatting -Use the Styles and Formatting window to apply, create, edit, add, and remove formatting styles. Double-click an entry to apply the style. -
-
- -
-To dock the Styles and Formatting window, drag its title bar to the left or to the right side of the workspace. To undock the window, double-click a free space on its toolbar. -How to apply a style: - - -Select the text. To apply a Character Style to one word, click the word. To apply a Paragraph Style, click the paragraph. - - -Double-click the style in the Styles and Formatting window. - - -You can assign shortcut keys to Styles on the Tools - Customize - Keyboard tab page. -The Styles and Formatting toolbar contains icons for formatting your documents: -Style Category +Styles and Formatting + Use the Styles and Formatting window to apply, create, edit, add, and remove formatting styles. Double-click an entry to apply the style. + +Choose Edit Paragraph Style in the context menu of a paragraph to edit the style of all paragraphs of the same style. +
+
+ +
+ To dock the Styles and Formatting window, drag its title bar to the left or to the right side of the workspace. To undock the window, double-click a free space on its toolbar. + How to apply a style: + + + Select the text. To apply a Character Style to one word, click the word. To apply a Paragraph Style, click the paragraph. + + + Double-click the style in the Styles and Formatting window. + + + You can assign shortcut keys to Styles on the Tools - Customize - Keyboard tab page. + The Styles and Formatting toolbar contains icons for formatting your documents: + Style Category - - - - - - - -Icon +
+ + + +Icon - - - Paragraph Styles - Displays formatting styles for paragraphs. Use paragraph styles to apply the same formatting, such as font, numbering, and layout to the paragraphs in your document. - - -
- + + + Paragraph Styles + Displays formatting styles for paragraphs. Use paragraph styles to apply the same formatting, such as font, numbering, and layout to the paragraphs in your document. + + + + - - - - - - - -Icon +
+ + + +Icon - - - Character Styles - Displays formatting styles for characters. Use character styles to apply font styles to selected text in a paragraph. - - -
- + + + Character Styles + Displays formatting styles for characters. Use character styles to apply font styles to selected text in a paragraph. + + + + - - - - - - - -Icon +
+ + + +Icon - - - Frame Styles - Displays formatting styles for frames. Use frame styles to format frame layouts and position. - - -
- + + + Frame Styles + Displays formatting styles for frames. Use frame styles to format frame layouts and position. + + + + - - - - - - - -Icon +
+ + + +Icon - - - Page Styles - Displays formatting styles for pages. Use page styles to determine page layouts, including the presence of headers and footers. - - -
- + + + Page Styles + Displays formatting styles for pages. Use page styles to determine page layouts, including the presence of headers and footers. + + + + - - - - - - - -Icon +
+ + + +Icon - - - List Styles - Displays formatting styles for numbered and bulleted lists. Use list styles to format number and bullet characters and to specify indents. - - -
- + + + List Styles + Displays formatting styles for numbered and bulleted lists. Use list styles to format number and bullet characters and to specify indents. + + + + - - - - - - -Icon +
+ + + +Icon - - - Fill Format Mode - Applies the selected style to the object or text that you select in the document. Click this icon, and then drag a selection in the document to apply the style. To exit this mode, click the icon again, or press Esc. - - - -
- - - - - - -Icon + + + Fill Format Mode + Applies the selected style to the object or text that you select in the document. Click this icon, and then drag a selection in the document to apply the style. To exit this mode, click the icon again, or press Esc. + + + +
+ + + + + +Icon - - - New Style from Selection - Opens a submenu with more commands. - + + + New Style from Selection + Opens a submenu with more commands. - New style from selection - Creates a new style based on the formatting of the current paragraph, page, or selection. - - +New style from selection + Creates a new style based on the formatting of the current paragraph, page, or selection. + - Update style - Updates the style that is selected in the Styles and Formatting window to match the style of the current text selection. - - UFI: removed help ids - Load style - Opens the Load Styles dialog to import styles from another document. - - -
- Style List / Style Groups / Context Menu: New / Modify / Delete - The commands offered in the Styles and Formatting window are the same as those found in the Style Catalog dialog.UFI: Style Catalog may be removed, see Format Menu spec - Applied Styles - - - +Update style + The manually formatted attributes of the text at the cursor position in the document will be added to the style that is selected in the Styles and Formatting window. + UFI: removed help ids +Load style + Opens the Load Styles dialog to import styles from another document. + + + + + Style List / Style Groups / Context Menu: New / Modify / Delete + The commands offered in the Styles and Formatting window are the same as those found in the Style Catalog dialog.UFI: Style Catalog may be removed, see Format Menu spec + Applied Styles + + + \ No newline at end of file diff --git a/helpcontent2/source/text/swriter/01/makefile.mk b/helpcontent2/source/text/swriter/01/makefile.mk index 7232a42131..1f4f63f6b4 100644 --- a/helpcontent2/source/text/swriter/01/makefile.mk +++ b/helpcontent2/source/text/swriter/01/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.11.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/swriter/02/makefile.mk b/helpcontent2/source/text/swriter/02/makefile.mk index 2e0b93dd5a..4e6abad8c1 100644 --- a/helpcontent2/source/text/swriter/02/makefile.mk +++ b/helpcontent2/source/text/swriter/02/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.10.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/swriter/04/01020000.xhp b/helpcontent2/source/text/swriter/04/01020000.xhp index 023a0896f7..f8f245fcbf 100755 --- a/helpcontent2/source/text/swriter/04/01020000.xhp +++ b/helpcontent2/source/text/swriter/04/01020000.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: 01020000.xhp,v $ - * $Revision: 1.15.4.2 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,1082 +35,1086 @@ - -Shortcut Keys for %PRODUCTNAME Writer -/text/swriter/04/01020000.xhp - - - -
+ + Shortcut Keys for %PRODUCTNAME Writer + /text/swriter/04/01020000.xhp + + + +
shortcut keys; in text documents -text documents; shortcut keys in + text documents; shortcut keys in -Shortcut Keys for %PRODUCTNAME Writer +Shortcut Keys for %PRODUCTNAME Writer -You can use shortcut keys to quickly perform common tasks in %PRODUCTNAME. This section lists the default shortcut keys for %PRODUCTNAME Writer. - -
-You can also use the general shortcut keys in %PRODUCTNAME. -Function Keys for %PRODUCTNAME Writer - - - -Shortcut keys - - -Effect - - - - -F2 - - -Formula Bar - - - - -Command + You can use shortcut keys to quickly perform common tasks in %PRODUCTNAME. This section lists the default shortcut keys for %PRODUCTNAME Writer. + + + You can also use the general shortcut keys in %PRODUCTNAME. + Function Keys for %PRODUCTNAME Writer +
+ + + Shortcut keys + + + Effect + + + + + F2 + + + Formula Bar + + + + + Command Ctrl+F2 - - -Insert Fields - - - - -F3 - - -Complete AutoText - - - - -Command + + + Insert Fields + + + + + F3 + + + Complete AutoText + + + + + Command Ctrl+F3 - - -Edit AutoText - - - - -F4 - - -Open Data Source View - - - - -Shift+F4 - - -Select next frameUFI: see spec "OpenDocumentBehavior" - - - - -F5 - - -Navigator on/off - - - - -Command + + + Edit AutoText + + + + + F4 + + + Open Data Source View + + + + + Shift+F4 + + + Select next frameUFI: see spec "OpenDocumentBehavior" + + + + + F5 + + + Navigator on/off + + + + + Command Ctrl+Shift+F5 - - -Navigator on, go to page number - - - - -F7 - - -Spellcheck - - - - -Command + + + Navigator on, go to page number + + + + + F7 + + + Spellcheck + + + + + Command Ctrl+F7 - - -Thesaurus - - - - -F8 - - -Extension mode - - - - -Command + + + Thesaurus + + + + + F8 + + + Extension mode + + + + + Command Ctrl+F8 - - -Field shadings on / off - - - - -Shift+F8 - - -Additional selection mode - - - - -Ctrl+Shift+F8 - - -Block selection mode - - - - -F9 - - -Update fields - - - - -Command + + + Field shadings on / off + + + + + Shift+F8 + + + Additional selection mode + + + + + Ctrl+Shift+F8 + + + Block selection mode + + + + + F9 + + + Update fields + + + + + Command Ctrl+F9 - - -Show fields - - - - -Shift+F9 - - -Calculate Table - - - - -Command + + + Show fields + + + + + Shift+F9 + + + Calculate Table + + + + + Command Ctrl+Shift+F9 - - -Update Input Fields and Input ListsUFI: fixes #i30104# - - - - -Command + + + Update Input Fields and Input ListsUFI: fixes #i30104# + + + + + Command Ctrl+F10 - - -Nonprinting Characters on/off - - - - -F11 - - -Styles and Formatting window on/off - - - - -Shift+F11 - - -Create Style - - - - -Command + + + Nonprinting Characters on/off + + + + + F11 + + + Styles and Formatting window on/off + + + + + Shift+F11 + + + Create Style + + + + + Command Ctrl+F11 - - -Sets focus to Apply Style boxi81468 - - - - -Command + + + Sets focus to Apply Style boxi81468 + + + + + Command Ctrl+Shift+F11 - - -Update Style - - - - -F12 - - -Numbering on - - - - -Command + + + Update Style + + + + + F12 + + + Numbering on + + + + + Command Ctrl+F12 - - -Insert or edit Table - - - - -Shift+F12 - - -Bullets on - - - - -Command + + + Insert or edit Table + + + + + Shift+F12 + + + Bullets on + + + + + Command Ctrl+Shift+F12 - - -Numbering / Bullets off - - -
+ + + Numbering / Bullets off + + + -Shortcut Keys for %PRODUCTNAME Writer - - - -Shortcut keys - - -Effect - - - - -Command + Shortcut Keys for %PRODUCTNAME Writer +
+ + + Shortcut keys + + + Effect + + + + + Command Ctrl+A - - -Select All - - - - -Command + + + Select All + + + + + Command Ctrl+J - - -Justify - - - - -Command + + + Justify + + + + + Command Ctrl+D - - -Double Underline - - - - -Command + + + Double Underline + + + + + Command Ctrl+E - - -Centered - - - - -Command + + + Centered + + + + + Command Ctrl+F - - -Find and Replace - - - - -Command + + + Find and Replace + + + + + Command Ctrl+Shift+P - - -Superscript - - - - -Command + + + Superscript + + + + + Command Ctrl+L - - -Align Left - - - - -Command + + + Align Left + + + + + Command Ctrl+R - - -Align Right - - - - -Command + + + Align Right + + + + + Command Ctrl+Shift+B - - -Subscript - - - - -Command + + + Subscript + + + + + Command Ctrl+Y - - -Redo last action - - - - -Command + + + Redo last action + + + + + Command Ctrl+0 (zero) - - -Apply Default paragraph styleUFI: see spec "Assign Keyboard Shortcuts to Styles" - - - - -Command + + + Apply Default paragraph styleUFI: see spec "Assign Keyboard Shortcuts to Styles" + + + + + Command Ctrl+1 - - -Apply Heading 1 paragraph style - - - - -Command + + + Apply Heading 1 paragraph style + + + + + Command Ctrl+2 - - -Apply Heading 2 paragraph style - - - - -Command + + + Apply Heading 2 paragraph style + + + + + Command Ctrl+3 - - -Apply Heading 3 paragraph style - - - - -Command + + + Apply Heading 3 paragraph style + + + + + Command Ctrl+5 - - -1.5 Line Spacing - - - - -Command + + + 1.5 Line Spacing + + + + + Command Ctrl+ Plus Key(+) - - -Calculates the selected text and copies the result to the clipboard. - - - - -Command + + + Calculates the selected text and copies the result to the clipboard. + + + + + Command Ctrl+Hyphen(-) - - -Custom hyphens; hyphenation set by you. - - - - -Command + + + Custom hyphens; hyphenation set by you. + + + + + Command Ctrl+Shift+minus sign (-) - - -Non-breaking dash (is not used for hyphenation) - - - - -Command + + + Non-breaking dash (is not used for hyphenation) + + + + + Command Ctrl+multiplication sign * (only on number pad) - - -Run macro field - - - - -Command + + + Run macro field + + + + + Command Ctrl+Shift+Space - - -Non-breaking spaces. Non-breaking spaces are not used for hyphenation and are not expanded if the text is justified. - - - - -Shift+Enter - - -Line break without paragraph change - - - - -Command + + + Non-breaking spaces. Non-breaking spaces are not used for hyphenation and are not expanded if the text is justified. + + + + + Shift+Enter + + + Line break without paragraph change + + + + + Command Ctrl+Enter - - -Manual page break - - - - -Command + + + Manual page break + + + + + Command Ctrl+Shift+Enter - - -Column break in multicolumnar texts - - - - -Option + + + Column break in multicolumnar texts + + + + + Option Alt+Enter - - -Inserting a new paragraph without numbering - - - - -Option + + + Inserting a new paragraph without numbering + + + + + Option Alt+Enter - - -Inserting a new paragraph directly before or after a section or a table. - - - - -Arrow Left - - -Move cursor to left - - - - -Shift+Arrow Left - - -Move cursor with selection to the left - - - - -Command + + + Inserting a new paragraph directly before or after a section or a table. + + + + + Arrow Left + + + Move cursor to left + + + + + Shift+Arrow Left + + + Move cursor with selection to the left + + + + + Command Ctrl+Arrow Left - - -Go to beginning of word - - - - -Command + + + Go to beginning of word + + + + + Command Ctrl+Shift+Arrow Left - - -Selecting to the left word by word - - - - -Arrow Right - - -Move cursor to right - - - - -Shift+Arrow Right - - -Move cursor with selection to the right - - - - -Command + + + Selecting to the left word by word + + + + + Arrow Right + + + Move cursor to right + + + + + Shift+Arrow Right + + + Move cursor with selection to the right + + + + + Command Ctrl+Arrow Right - - -Go to start of next word - - - - -Command + + + Go to start of next word + + + + + Command Ctrl+Shift+Arrow Right - - -Selecting to the right word by word - - - - -Arrow Up - - -Move cursor up one line - - - - -Shift+Arrow Up - - -Selecting lines in an upwards direction - - - - -Ctrl+Arrow UpUFI: inserted 4 rows, see i31697 - - -Move cursor to beginning of paragraph - - - - -Shift+Ctrl+Arrow Up - - -Select to beginning of paragraph - - - - -Arrow Down - - -Move cursor down one line - - - - -Shift+Arrow Down - - -Selecting lines in a downward direction - - - - -Ctrl+Arrow Down - - -Move cursor to end of paragraph - - - - -Shift+Ctrl+Arrow Down - - -Select to end of paragraph - - - - -Home - - -Go to beginning of line - - - - -Shift+Home - - -Go and select to the beginning of a line - - - - -End - - -Go to end of line - - - - -Shift+End - - -Go and select to end of line - - - - -Command + + + Selecting to the right word by word + + + + + Arrow Up + + + Move cursor up one line + + + + + Shift+Arrow Up + + + Selecting lines in an upwards direction + + + + + Ctrl+Arrow UpUFI: inserted 4 rows, see i316972 years later I got an email that the submitted help patch was wrong. Corrected the Help accordingly. + + + Move cursor to beginning of the previous paragraph + + + + + Shift+Ctrl+Arrow Up + + + Select to beginning of paragraph. Next keystroke extends selection to beginning of previous paragraph + + + + + Arrow Down + + + Move cursor down one line + + + + + Shift+Arrow Down + + + Selecting lines in a downward direction + + + + + Ctrl+Arrow Down + + + Move cursor to beginning of next paragraph. + + + + + Shift+Ctrl+Arrow Down + + + Select to end of paragraph. Next keystroke extends selection to end of next paragraph + + + + + Home + + + Go to beginning of line + + + + + Shift+Home + + + Go and select to the beginning of a line + + + + + End + + + Go to end of line + + + + + Shift+End + + + Go and select to end of line + + + + + Command Ctrl+Home - - -Go to start of document - - - - -Command + + + Go to start of document + + + + + Command Ctrl+Shift+Home - - -Go and select text to start of document - - - - -Command + + + Go and select text to start of document + + + + + Command Ctrl+End - - -Go to end of document - - - - -Command + + + Go to end of document + + + + + Command Ctrl+Shift+End - - -Go and select text to end of document - - - - -Command + + + Go and select text to end of document + + + + + Command Ctrl+PageUp - - -Switch cursor between text and header - - - - -Command + + + Switch cursor between text and header + + + + + Command Ctrl+PageDown - - -Switch cursor between text and footer - - - - -Insert - - -Insert mode on/off - - - - -PageUp - - -Screen page up - - - - -Shift+PageUp - - -Move up screen page with selection - - - - -PageDown - - -Move down screen page - - - - -Shift+PageDown - - -Move down screen page with selection - - - - -Command + + + Switch cursor between text and footer + + + + + Insert + + + Insert mode on/off + + + + + PageUp + + + Screen page up + + + + + Shift+PageUp + + + Move up screen page with selection + + + + + PageDown + + + Move down screen page + + + + + Shift+PageDown + + + Move down screen page with selection + + + + + Command Ctrl+Del - - -Delete text to end of word - - - - -Command + + + Delete text to end of word + + + + + Command Ctrl+Backspace - - -Delete text to beginning of word -In a list: delete an empty paragraph in front of the current paragraph - - - - -Command + + + Delete text to beginning of word + In a list: delete an empty paragraph in front of the current paragraph + + + + + Command Ctrl+Shift+Del - - -Delete text to end of sentence - - - - -Command + + + Delete text to end of sentence + + + + + Command Ctrl+Shift+Backspace - - -Delete text to beginning of sentence - - - - -Command + + + Delete text to beginning of sentence + + + + + Command Ctrl+Tab - - -Next suggestion with Automatic Word Completion - - - - -Command + + + Next suggestion with Automatic Word Completion + + + + + Command Ctrl+Shift+Tab - - -Use previous suggestion with Automatic Word Completion - - - - -Command + + + Use previous suggestion with Automatic Word Completion + + + + + Command Ctrl+ double-click or Command Ctrl+Shift+F10 - - -Use this combination to quickly dock or undock the Navigator, Styles and Formatting window, or other windows - - -
+ + + Use this combination to quickly dock or undock the Navigator, Styles and Formatting window, or other windows + + + headings; switching levels by keyboard -paragraphs; moving by keyboard + paragraphs; moving by keyboard -Shortcut Keys for Paragraphs and Heading Levels - - - -Shortcut keys - - -Effect - - - - -Command+Option +Shortcut Keys for Paragraphs and Heading Levels +
+ + + Shortcut keys + + + Effect + + + + + Command+Option Ctrl+Alt+Up ArrowUFI: see sw-features "Ctrl + Up/Down accelerators added to move paragraphs". See now also i31697 - - -Move the active paragraph or selected paragraphs up one paragraph. - - - - -Command+Option + + + Move the active paragraph or selected paragraphs up one paragraph. + + + + + Command+Option Ctrl+Alt+Down Arrow - - -Move the active paragraph or selected paragraphs down one paragraph. - - - - -Tab - - -The heading in format "Heading X" (X = 1-9) is moved down one level in the outline. - - - - -Shift+Tab - - -The heading in format "Heading X" (X = 2-10) is moved up one level in the outline. - - - - -Command + + + Move the active paragraph or selected paragraphs down one paragraph. + + + + + Tab + + + The heading in format "Heading X" (X = 1-9) is moved down one level in the outline. + + + + + Shift+Tab + + + The heading in format "Heading X" (X = 2-10) is moved up one level in the outline. + + + + + Command Ctrl+Tab - - + + tab stops; before headings -headings; starting with tab stops + headings; starting with tab stops -At the start of a heading: Inserts a tab stop. Depending on the Window Manager in use, Option +At the start of a heading: Inserts a tab stop. Depending on the Window Manager in use, Option Alt+Tab may be used instead. -To change the heading level with the keyboard, first position the cursor in front of the heading. - - -
+ To change the heading level with the keyboard, first position the cursor in front of the heading. + + + -Shortcut Keys for Tables in %PRODUCTNAME Writer - - - -Shortcut Keys - - -Effect - - - - -Command + Shortcut Keys for Tables in %PRODUCTNAME Writer +
+ + + Shortcut Keys + + + Effect + + + + + Command Ctrl+A - - -If the active cell is empty: selects the whole table. Otherwise: selects the contents of the active cell. Pressing again selects the entire table. - - - - -Command + + + If the active cell is empty: selects the whole table. Otherwise: selects the contents of the active cell. Pressing again selects the entire table. + + + + + Command Ctrl+Home - - -If the active cell is empty: goes to the beginning of the table. Otherwise: first press goes to beginning of the active cell, second press goes to beginning of the current table, third press goes to beginning of document. - - - - -Command + + + If the active cell is empty: goes to the beginning of the table. Otherwise: first press goes to beginning of the active cell, second press goes to beginning of the current table, third press goes to beginning of document. + + + + + Command Ctrl+End - - -If the active cell is empty: goes to the end of the table. Otherwise: first press goes to the end of the active cell, second press goes to the end of the current table, third press goes to the end of the document. - - - - -Command + + + If the active cell is empty: goes to the end of the table. Otherwise: first press goes to the end of the active cell, second press goes to the end of the current table, third press goes to the end of the document. + + + + + Command Ctrl+Tab - - -Inserts a tab stop (only in tables). Depending on the Window Manager in use, Option + + + Inserts a tab stop (only in tables). Depending on the Window Manager in use, Option Alt+Tab may be used instead. - - - - -Option + + + + + Option Alt+Arrow Keys - - -Increases/decreases the size of the column/row on the right/bottom cell edgeUFI: deleted two rows, see i31697 - - - - -Option + + + Increases/decreases the size of the column/row on the right/bottom cell edgeUFI: deleted two rows, see i31697 + + + + + Option Alt+Shift+Arrow Keys - - -Increase/decrease the size of the column/row on the left/top cell edge - - - - -Option+Command + + + Increase/decrease the size of the column/row on the left/top cell edge + + + + + Option+Command Alt+Ctrl+Arrow Keys - - -Like Option + + + Like Option Alt, but only the active cell is modified - - - - -Option+Command + + + + + Option+Command Ctrl+Alt+Shift+Arrow Keys - - -Like Option + + + Like Option Alt, but only the active cell is modified - - - - -Option + + + + + Option Alt+Insert - - -3 seconds in Insert mode, Arrow Key inserts row/column, Command + + + 3 seconds in Insert mode, Arrow Key inserts row/column, Command Ctrl+Arrow Key inserts cell - - - - -Option + + + + + Option Alt+Del - - -3 seconds in Delete mode, Arrow key deletes row/column, Command + + + 3 seconds in Delete mode, Arrow key deletes row/column, Command Ctrl+Arrow key merges cell with neighboring cell - - - - + + + + removing; cell protection in text documents -Command +Command Ctrl+Shift+T - - -Removes cell protection from all selected tables. If no table is selected, then cell protection is removed from all of the tables in the document. - - - - -Shift+Command + + + Removes cell protection from all selected tables. If no table is selected, then cell protection is removed from all of the tables in the document. + + + + + Shift+Command Ctrl+Del - - -If no whole cell is selected, the text from the cursor to the end of the current sentence is deleted. If the cursor is at the end of a cell, and no whole cell is selected, the contents of the next cell are deleted. -If no whole cell is selected and the cursor is at the end of the table, the following sentence from below the table will be deleted and the remainder of that paragraph will be moved into the last table cell. If an empty line follows the table, the empty line will be deleted. -If one or more cells are selected, the whole rows containing the selection will be deleted. If all rows are selected completely or partially, the entire table will be deleted. - - -
+ + + If no whole cell is selected, the text from the cursor to the end of the current sentence is deleted. If the cursor is at the end of a cell, and no whole cell is selected, the contents of the next cell are deleted. + If no whole cell is selected and the cursor is at the end of the table, the following sentence from below the table will be deleted and the remainder of that paragraph will be moved into the last table cell. If an empty line follows the table, the empty line will be deleted. + If one or more cells are selected, the whole rows containing the selection will be deleted. If all rows are selected completely or partially, the entire table will be deleted. + + + -Shortcut Keys for Moving and Resizing Frames, Graphics and Objects - - - -Shortcut Keys - - -Effect - - - - -Esc - - -Cursor is inside a text frame and no text is selected: Escape selects the text frame. -Text frame is selected: Escape clears the cursor from the text frame. - - - - -F2 or Enter or any key that produces a character on screen - - -If a text frame is selected: positions the cursor to the end of the text in the text frame. If you press any key that produces a character on screen, and the document is in edit mode, the character is appended to the text. - - - - -Option + Shortcut Keys for Moving and Resizing Frames, Graphics and Objects +
+ + + Shortcut Keys + + + Effect + + + + + Esc + + + Cursor is inside a text frame and no text is selected: Escape selects the text frame. + Text frame is selected: Escape clears the cursor from the text frame. + + + + + F2 or Enter or any key that produces a character on screen + + + If a text frame is selected: positions the cursor to the end of the text in the text frame. If you press any key that produces a character on screen, and the document is in edit mode, the character is appended to the text. + + + + + Option Alt+Arrow Keys - - -Move object. - - - - -Option+Command + + + Move object. + + + + + Option+Command Alt+Ctrl+Arrow Keys - - -Resizes by moving lower right corner. - - - - -Option+Command + + + Resizes by moving lower right corner. + + + + + Option+Command Alt+Ctrl+Shift+Arrow Keys - - -Resizes by moving top left corner. - - - - -Command + + + Resizes by moving top left corner. + + + + + Command Ctrl+Tab - - -Selects the anchor of an object (in Edit Points mode). - - -
+ + + Selects the anchor of an object (in Edit Points mode). + + + -
- - - -
- - +
+ + + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/swriter/04/makefile.mk b/helpcontent2/source/text/swriter/04/makefile.mk index 14546c7538..45c9d2226e 100644 --- a/helpcontent2/source/text/swriter/04/makefile.mk +++ b/helpcontent2/source/text/swriter/04/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.8.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/swriter/guide/arrange_chapters.xhp b/helpcontent2/source/text/swriter/guide/arrange_chapters.xhp index bef88d2c27..93081e09bf 100644 --- a/helpcontent2/source/text/swriter/guide/arrange_chapters.xhp +++ b/helpcontent2/source/text/swriter/guide/arrange_chapters.xhp @@ -60,12 +60,12 @@ On the Standard Bar, click the Navigator icon -{ENTER ALTERNATE DESCRIPTION HERE} +Icon to open the Navigator. On the Navigator, click the Content View icon -{ENTER ALTERNATE DESCRIPTION HERE} +Icon . @@ -78,9 +78,9 @@ Click a heading in the Navigator list, and then click the Promote Chapter -{ENTER ALTERNATE DESCRIPTION HERE} +Icon or Demote Chapter icon -{ENTER ALTERNATE DESCRIPTION HERE} +Icon . @@ -92,15 +92,15 @@ Click the Promote Level -{ENTER ALTERNATE DESCRIPTION HERE} +Icon or Demote Level icon -{ENTER ALTERNATE DESCRIPTION HERE} +Icon . To Change the Number of Heading Levels That Are Displayed Click the Heading Levels Shown icon -{ENTER ALTERNATE DESCRIPTION HERE} +Icon , and then select a number from the list.
diff --git a/helpcontent2/source/text/swriter/guide/form_letters_main.xhp b/helpcontent2/source/text/swriter/guide/form_letters_main.xhp index ac7298c5eb..bc284243dc 100755 --- a/helpcontent2/source/text/swriter/guide/form_letters_main.xhp +++ b/helpcontent2/source/text/swriter/guide/form_letters_main.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: form_letters_main.xhp,v $ - * $Revision: 1.11.4.2 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,53 +35,55 @@ - -Creating a Form Letter -/text/swriter/guide/form_letters_main.xhp - - - -form letters -mail merge -letters; creating form letters -wizards;form letters - -Creating a Form Letter + + Creating a Form Letter + /text/swriter/guide/form_letters_main.xhp + + + +serial letters + form letters + mail merge + letters; creating form letters + wizards;form letters +mw added "serial letters" +Creating a Form Letter -To create a form letter, you need a text document that contains fields for address data, and an address database. Then you combine or merge the address data and the text document to either print the letters or send them by e-mail. -If the document is in HTML format, any embedded or linked images will not be sent with the e-mail. -The Mail Merge Wizard helps you to create form letters. -To create a form letter - - -Choose Tools - Mail Merge Wizard. -You see the Mail Merge Wizard dialog. The following is an example of one of many possible ways to navigate the wizard's pages: - - -Select Start from a template, and click the Browse button. -You see the Templates dialog. - - -Select Business Correspondence in the left list, and then Modern letter in the right list. Click OK to close the Templates dialog, and click Next in the wizard.removed the next two paras - - -Select Letter and click Next. - - -On the next step of the wizard, click the Select Address List button to check that you are using the correct address list. Select an address block type, match the data fields if necessary, and click Next. - - -Next follows the Create a salutation step. Deselect the Insert personalized salutation box. Under General salutation, select the salutation that you want on top of all letters. - - -Click Next and finally Finish to create the mail merge. - - - - - - - - - + To create a form letter, you need a text document that contains fields for address data, and an address database. Then you combine or merge the address data and the text document to either print the letters or send them by e-mail. + If the document is in HTML format, any embedded or linked images will not be sent with the e-mail. + The Mail Merge Wizard helps you to create form letters. + To create a form letter + + + Choose Tools - Mail Merge Wizard. + You see the Mail Merge Wizard dialog. The following is an example of one of many possible ways to navigate the wizard's pages: + + + Select Start from a template, and click the Browse button. + You see the Templates dialog. + + + Select Business Correspondence in the left list, and then Modern letter in the right list. Click OK to close the Templates dialog, and click Next in the wizard.removed the next two paras + + + Select Letter and click Next. + + + On the next step of the wizard, click the Select Address List button to check that you are using the correct address list. Select an address block type, match the data fields if necessary, and click Next. + + + Next follows the Create a salutation step. Deselect the Insert personalized salutation box. Under General salutation, select the salutation that you want on top of all letters. + + + Click Next and finally Finish to create the mail merge. + + + + + + + + + \ No newline at end of file diff --git a/helpcontent2/source/text/swriter/guide/hyphen_prevent.xhp b/helpcontent2/source/text/swriter/guide/hyphen_prevent.xhp index acb0339c16..45f12e43b2 100644 --- a/helpcontent2/source/text/swriter/guide/hyphen_prevent.xhp +++ b/helpcontent2/source/text/swriter/guide/hyphen_prevent.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Preventing Hyphenation of Specific Words -/text/swriter/guide/hyphen_prevent.xhp - - - - - - + + Preventing Hyphenation of Specific Words + /text/swriter/guide/hyphen_prevent.xhp + + + hyphenation;preventing for specific words -words;wrapping/not wrapping in text -switching off;hyphenation for specific words - - mw copied 2 entries from using_hyphen.xhp and added a new entry - Preventing Hyphenation of Specific Words - - MW created this guide from splitting using_hyphen.xhp - If your text is automatically hyphenated and certain hyphenated words look ugly, or if you want specific words never to be hyphenated you can switch off hyphenation for those words: - - - Choose Tools - Options - Language Settings - Writing Aids - - - Select a dictionary in the User-defined dictionary list, and then click Edit. - If the list is empty, click New to create a dictionary. - - - In the Word box, type the word you want to exclude from hyphenation, followed by an equal sign (=), for example, "pretentious=". - - - Click New, and then click Close. - - - To quickly exclude a word from hyphenation, select the word, choose Format - Character, click the Font tab, and select "None" in the Language box. - - - Text Flow - - + words;wrapping/not wrapping in text + switching off;hyphenation for specific words +mw copied 2 entries from using_hyphen.xhp and added a new entry +Preventing Hyphenation of Specific Words +MW created this guide from splitting using_hyphen.xhp +If your text is automatically hyphenated and certain hyphenated words look ugly, or if you want specific words never to be hyphenated you can switch off hyphenation for those words: + + + Choose Tools - Options - Language Settings - Writing Aids + + + + Select a dictionary in the User-defined dictionary list, and then click Edit. + If the list is empty, click New to create a dictionary. + + + In the Word box, type the word you want to exclude from hyphenation, followed by an equal sign (=), for example, "pretentious=". + + + Click New, and then click Close. + + + To quickly exclude a word from hyphenation, select the word, choose Format - Character, click the Font tab, and select "None" in the Language box. + Some words contain special characters that %PRODUCTNAME treats as a hyphen. If you do not want such words to be hyphenated, you can insert a special code that prevents hyphenation at the position where the special code is inserted. Proceed as follows: + + + Enable the special features of complex text layout (CTL) languages: Choose Tools - Options - Language Settings - Languages and check Enabled for complex text layout (CTL). Click OK. + + + Position the cursor at the place where no hyphenation should occur. + + + Choose Insert - Formatting Mark - No-width no break. + Once the special character is inserted, you might disable CTL again. Support of CTL was only necessary to insert the special character. + + + + + Text Flow + + \ No newline at end of file diff --git a/helpcontent2/source/text/swriter/guide/insert_line.xhp b/helpcontent2/source/text/swriter/guide/insert_line.xhp index 9f902deaf8..7986dce01e 100644 --- a/helpcontent2/source/text/swriter/guide/insert_line.xhp +++ b/helpcontent2/source/text/swriter/guide/insert_line.xhp @@ -1,9 +1,8 @@ - - - + + - - - + + - -Inserting a Horizontal Line -/text/swriter/guide/insert_line.xhp - - - + + Inserting a Horizontal Line + /text/swriter/guide/insert_line.xhp + + + horizontal lines -lines; inserting horizontal lines -rulers;horizontal lines -inserting; horizontal lines + lines; inserting horizontal lines + rules + inserting; horizontal lines -Inserting a Horizontal Line +Inserting a Horizontal Line -This guide is about inserting graphical ruler lines. You can also insert other lines, see Drawing Lines in Text. - - -Click in the document where you want to insert the line. - - -Choose Insert - Horizontal Ruler. - - - - -Click the line that you want to insert in the Selection list. - - -Click OK. - - -The "Plain" type -If you select the "Plain" type of ruler, an empty paragraph is inserted at the position of the cursor. This paragraph has the style "Horizontal Line", with a line as the lower border of the paragraph. You can edit that Paragraph Style to change the properties of all "Plain" rulers in your document. For example you can set the left indent to 3 inches, or you can change the line style, thickness, and color. -To edit the "Plain" ruler style - - -Choose Format - Styles and Formatting to open the Styles and Formatting window. - - -In the listbox at the bottom, select to display "All Styles". - - -Right-click the "Horizontal Line" paragraph style. - - -Choose Modify. -For example, open the Borders tab page to set the thickness and style of the lines. Open the Indents & Spacing tab page to set the indents of the line. - - -The graphical type -Select any ruler type below of the "Plain" ruler type. This inserts a new paragraph at the position of the cursor. A picture showing a graphical horizontal line is inserted. -The inserted line is anchored to the current paragraph and centered between the page margins. - - -To edit the graphical line, right-click the line and choose Picture. - - -You can also insert one of these lines by dragging it from the Rulers folder in the Gallery into the current document. - - - -Gallery - - + This guide is about inserting graphical rules. You can also insert other lines, see Drawing Lines in Text. + + + Click in the document where you want to insert the line. + + + Choose Insert - Horizontal Rule. + + + + + Click the line that you want to insert in the Selection list. + + + Click OK. + + + The "Plain" type + If you select the "Plain" type of rules, an empty paragraph is inserted at the position of the cursor. This paragraph has the style "Horizontal Line", with a line as the lower border of the paragraph. You can edit that Paragraph Style to change the properties of all "Plain" rules in your document. For example you can set the left indent to 3 inches, or you can change the line style, thickness, and color. + To edit the "Plain" rule style + + + Choose Format - Styles and Formatting to open the Styles and Formatting window. + + + In the listbox at the bottom, select to display "All Styles". + + + Right-click the "Horizontal Line" paragraph style. + + + Choose Modify. + For example, open the Borders tab page to set the thickness and style of the lines. Open the Indents & Spacing tab page to set the indents of the line. + + + The graphical type + Select any rule type below of the "Plain" rule type. This inserts a new paragraph at the position of the cursor. A picture showing a graphical horizontal line is inserted. + The inserted line is anchored to the current paragraph and centered between the page margins. + + + To edit the graphical line, right-click the line and choose Picture. + + + You can also insert one of these lines by dragging it from the Rulers folder in the Gallery into the current document. + + + + Gallery + + \ No newline at end of file diff --git a/helpcontent2/source/text/swriter/guide/makefile.mk b/helpcontent2/source/text/swriter/guide/makefile.mk index 7c065b6131..c4c2763aa4 100644 --- a/helpcontent2/source/text/swriter/guide/makefile.mk +++ b/helpcontent2/source/text/swriter/guide/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.18.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/source/text/swriter/guide/stylist_update.xhp b/helpcontent2/source/text/swriter/guide/stylist_update.xhp index 946e175a72..bcbc2cf699 100644 --- a/helpcontent2/source/text/swriter/guide/stylist_update.xhp +++ b/helpcontent2/source/text/swriter/guide/stylist_update.xhp @@ -1,8 +1,8 @@ - - + + + - - -Updating Styles From Selections -/text/swriter/guide/stylist_update.xhp - - -Sun Microsystems, Inc. -converted from old format - fpe - - - + + Updating Styles From Selections + /text/swriter/guide/stylist_update.xhp + + + Stylist, see Styles and Formatting window -styles; updating from selections -templates; updating from selections -Styles and Formatting window; updating from selections -updating; styles, from selections + styles; updating from selections + templates; updating from selections + Styles and Formatting window; updating from selections + updating; styles, from selections -Updating Styles From Selections +Updating Styles From Selections - - -Choose Format - Styles and Formatting. - - -Click the icon of the style category that you want to update.UFI: use "category" for consistent wording, see #i21144# - - -In the document, click where you want to copy the updated style from. For example, click a paragraph that you applied manual formatting to. - - -In the Styles and Formatting window, click the style that you want to update. - - -Click the arrow next to the New Style from Selection icon and choose Update Style from the submenu. - - -
- - - -Styles and Formatting -
- - + + + Choose Format - Styles and Formatting. + + + Click the icon of the style category that you want to update.UFI: use "category" for consistent wording, see #i21144# + + + In the document, click from where you want to copy the updated style. For example, click a paragraph to which you applied some manual formatting that you want to copy now. + + + In the Styles and Formatting window, click the style that you want to update. + + + Click the arrow next to the New Style from Selection icon and choose Update Style from the submenu. + + + Only the manually formatted attributes of the text at the cursor position in the document will be added to the style that is selected in the Styles and Formatting window. Any attributes that were applied as part of a style will not be added to the updated style. +
+ + + + Styles and Formatting +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/swriter/guide/table_sizing.xhp b/helpcontent2/source/text/swriter/guide/table_sizing.xhp index b0b0b94325..732612ddff 100644 --- a/helpcontent2/source/text/swriter/guide/table_sizing.xhp +++ b/helpcontent2/source/text/swriter/guide/table_sizing.xhp @@ -56,7 +56,7 @@ -{ENTER ALTERNATE DESCRIPTION HERE} +Icon @@ -77,7 +77,7 @@ Hold down Command -Ctrl and then click and drag a line to scale all cells right or below the line. +Ctrl and then click and drag a line to scale all cells right or above the line proportionally. Place the cursor in a cell in the column, hold down the Option diff --git a/helpcontent2/source/text/swriter/guide/text_emphasize.xhp b/helpcontent2/source/text/swriter/guide/text_emphasize.xhp index bb8f2fbfb4..124f007e0a 100644 --- a/helpcontent2/source/text/swriter/guide/text_emphasize.xhp +++ b/helpcontent2/source/text/swriter/guide/text_emphasize.xhp @@ -10,8 +10,8 @@ * * OpenOffice.org - a multi-platform office productivity suite * - * $RCSfile: text_emphasize.xhp,v $ - * $Revision: 1.6.4.1 $ + * $RCSfile: soffice2xmlhelp.xsl,v $ + * $Revision: 1.10 $ * * This file is part of OpenOffice.org. * @@ -35,39 +35,38 @@ - -Emphasizing Text -/text/swriter/guide/text_emphasize.xhp - - - + + Emphasizing Text + /text/swriter/guide/text_emphasize.xhp + + + text; emphasizing -emphasizing text + emphasizing text -Emphasizing Text +Emphasizing Text -Here are a few examples of how to emphasize text in a document: - - -Select the text and apply a different font style or effect, such as bold. - - -Right-click in a paragraph, choose Paragraph, set the options that you want, for example, the background color, and then click OK. - - -Select the text, and then choose Insert Frame. - - - - -Use the Text tool on the Drawing toolbar. - - -Use Fontwork. To open the Fontwork window, click the Fontwork Gallery icon on the Drawing bar. - - - - - - - + Here are a few examples of how to emphasize text in a document: + + + Select the text and apply a different font style or effect, such as bold. + + + Right-click in a paragraph, choose Paragraph, set the options that you want, for example, the background color, and then click OK. + + + Select the text, and then choose Insert Frame. + + + Use the Text tool on the Drawing toolbar. + + + Use Fontwork. To open the Fontwork window, click the Fontwork Gallery icon on the Drawing bar. + + + + + + + \ No newline at end of file diff --git a/helpcontent2/source/text/swriter/main0104.xhp b/helpcontent2/source/text/swriter/main0104.xhp index 5b79e2079b..578245665c 100755 --- a/helpcontent2/source/text/swriter/main0104.xhp +++ b/helpcontent2/source/text/swriter/main0104.xhp @@ -77,7 +77,7 @@ Table -Horizontal Line +Horizontal Rule diff --git a/helpcontent2/source/text/swriter/main0202.xhp b/helpcontent2/source/text/swriter/main0202.xhp index cabd6b9ad1..e2cec09f8b 100644 --- a/helpcontent2/source/text/swriter/main0202.xhp +++ b/helpcontent2/source/text/swriter/main0202.xhp @@ -1,7 +1,8 @@ - - - + ************************************************************************ + --> + - - -Formatting Bar -/text/swriter/main0202.xhp - - -Sun Microsystems, Inc. -UFI: inserted icons at end of file - - - -
+ + Formatting Bar + /text/swriter/main0202.xhp + + + +
-Formatting Bar -The Formatting bar contains several text formatting functions. -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Font Color - - - - - - -Additional icons -If CTL support is enabled, two additional icons are visible. - +Formatting Bar + The Formatting bar contains several text formatting functions. +
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Font Color + + + + + + + Additional icons + +Increase Font + Increases the font size of the selected text. + +Reduce Font + Reduces the font size of the selected text. + If CTL support is enabled, two additional icons are visible. + -Left-To-Right - - - - -left to right icon +Left-To-Right +
+ + + +left to right icon - - -The text is entered from left to right. - - -
+ + + The text is entered from left to right. + + + - + -Right-To-Left - - - - -right to left icon +Right-To-Left +
+ + + +right to left icon - - -The text formatted in a complex text layout language is entered from right to left. - - -
+ + + The text formatted in a complex text layout language is entered from right to left. + + + - - + + \ No newline at end of file diff --git a/helpcontent2/source/text/swriter/makefile.mk b/helpcontent2/source/text/swriter/makefile.mk index 86b290ab8a..67d9160439 100644 --- a/helpcontent2/source/text/swriter/makefile.mk +++ b/helpcontent2/source/text/swriter/makefile.mk @@ -6,9 +6,9 @@ # # OpenOffice.org - a multi-platform office productivity suite # -# $RCSfile: makefile.mk,v $ +# $RCSfile: makefile.template,v $ # -# $Revision: 1.9.4.4 $ +# $Revision: 1.5 $ # # This file is part of OpenOffice.org. # diff --git a/helpcontent2/util/sbasic/makefile.mk b/helpcontent2/util/sbasic/makefile.mk index e48d06ae0a..28a357b782 100644 --- a/helpcontent2/util/sbasic/makefile.mk +++ b/helpcontent2/util/sbasic/makefile.mk @@ -3,9 +3,9 @@ #* $Workfile:$ #* #* Creation date KR 28.06.99 -#* last change $Author: kz $ $Date: 2008-03-07 12:40:13 $ +#* last change $Author: hr $ $Date: 2007-06-26 12:34:21 $ #* -#* $Revision: 1.39 $ +#* $Revision: 1.11 $ #* #* $Logfile:$ #* @@ -992,6 +992,7 @@ LINKLINKFILES= \ text$/shared$/explorer$/database$/menuinsert.xhp \ text$/shared$/explorer$/database$/menutools.xhp \ text$/shared$/explorer$/database$/menuview.xhp \ + text$/shared$/explorer$/database$/migrate_macros.xhp \ text$/shared$/explorer$/database$/password.xhp \ text$/shared$/explorer$/database$/querywizard00.xhp \ text$/shared$/explorer$/database$/querywizard01.xhp \ diff --git a/helpcontent2/util/scalc/makefile.mk b/helpcontent2/util/scalc/makefile.mk index 198dfd32d1..95354644d9 100644 --- a/helpcontent2/util/scalc/makefile.mk +++ b/helpcontent2/util/scalc/makefile.mk @@ -3,9 +3,9 @@ #* $Workfile:$ #* #* Creation date KR 28.06.99 -#* last change $Author: kz $ $Date: 2008-03-07 12:40:31 $ +#* last change $Author: hr $ $Date: 2007-06-26 12:34:21 $ #* -#* $Revision: 1.44 $ +#* $Revision: 1.11 $ #* #* $Logfile:$ #* @@ -1006,6 +1006,7 @@ LINKLINKFILES= \ text$/shared$/explorer$/database$/menuinsert.xhp \ text$/shared$/explorer$/database$/menutools.xhp \ text$/shared$/explorer$/database$/menuview.xhp \ + text$/shared$/explorer$/database$/migrate_macros.xhp \ text$/shared$/explorer$/database$/password.xhp \ text$/shared$/explorer$/database$/querywizard00.xhp \ text$/shared$/explorer$/database$/querywizard01.xhp \ diff --git a/helpcontent2/util/schart/makefile.mk b/helpcontent2/util/schart/makefile.mk index 6c7e236690..038298cefc 100644 --- a/helpcontent2/util/schart/makefile.mk +++ b/helpcontent2/util/schart/makefile.mk @@ -3,9 +3,9 @@ #* $Workfile:$ #* #* Creation date KR 28.06.99 -#* last change $Author: vg $ $Date: 2008-06-03 12:53:14 $ +#* last change $Author: hr $ $Date: 2007-06-26 12:34:21 $ #* -#* $Revision: 1.30 $ +#* $Revision: 1.11 $ #* #* $Logfile:$ #* @@ -695,6 +695,7 @@ LINKLINKFILES= \ text$/shared$/explorer$/database$/menuinsert.xhp \ text$/shared$/explorer$/database$/menutools.xhp \ text$/shared$/explorer$/database$/menuview.xhp \ + text$/shared$/explorer$/database$/migrate_macros.xhp \ text$/shared$/explorer$/database$/password.xhp \ text$/shared$/explorer$/database$/querywizard00.xhp \ text$/shared$/explorer$/database$/querywizard01.xhp \ diff --git a/helpcontent2/util/sdatabase/makefile.mk b/helpcontent2/util/sdatabase/makefile.mk index 329d470439..274f3921ce 100644 --- a/helpcontent2/util/sdatabase/makefile.mk +++ b/helpcontent2/util/sdatabase/makefile.mk @@ -3,9 +3,9 @@ #* $Workfile:$ #* #* Creation date KR 28.06.99 -#* last change $Author: vg $ $Date: 2008-06-03 12:54:10 $ +#* last change $Author: hr $ $Date: 2007-06-26 12:34:21 $ #* -#* $Revision: 1.30 $ +#* $Revision: 1.11 $ #* #* $Logfile:$ #* @@ -693,6 +693,7 @@ LINKLINKFILES= \ text$/shared$/explorer$/database$/menuinsert.xhp \ text$/shared$/explorer$/database$/menutools.xhp \ text$/shared$/explorer$/database$/menuview.xhp \ + text$/shared$/explorer$/database$/migrate_macros.xhp \ text$/shared$/explorer$/database$/password.xhp \ text$/shared$/explorer$/database$/querywizard00.xhp \ text$/shared$/explorer$/database$/querywizard01.xhp \ diff --git a/helpcontent2/util/sdraw/makefile.mk b/helpcontent2/util/sdraw/makefile.mk index 60da5500d9..e093d521d8 100644 --- a/helpcontent2/util/sdraw/makefile.mk +++ b/helpcontent2/util/sdraw/makefile.mk @@ -3,9 +3,9 @@ #* $Workfile:$ #* #* Creation date KR 28.06.99 -#* last change $Author: kz $ $Date: 2008-03-07 12:41:35 $ +#* last change $Author: hr $ $Date: 2007-06-26 12:34:21 $ #* -#* $Revision: 1.41 $ +#* $Revision: 1.11 $ #* #* $Logfile:$ #* @@ -928,6 +928,7 @@ LINKLINKFILES= \ text$/shared$/explorer$/database$/menuinsert.xhp \ text$/shared$/explorer$/database$/menutools.xhp \ text$/shared$/explorer$/database$/menuview.xhp \ + text$/shared$/explorer$/database$/migrate_macros.xhp \ text$/shared$/explorer$/database$/password.xhp \ text$/shared$/explorer$/database$/querywizard00.xhp \ text$/shared$/explorer$/database$/querywizard01.xhp \ diff --git a/helpcontent2/util/shared/makefile.mk b/helpcontent2/util/shared/makefile.mk index 2e088e43cd..6bc04ce32d 100644 --- a/helpcontent2/util/shared/makefile.mk +++ b/helpcontent2/util/shared/makefile.mk @@ -3,9 +3,9 @@ #* $Workfile:$ #* #* Creation date KR 28.06.99 -#* last change $Author: hr $ $Date: 2007-06-26 12:35:57 $ +#* last change $Author: hr $ $Date: 2007-06-26 12:34:21 $ #* -#* $Revision: 1.18 $ +#* $Revision: 1.11 $ #* #* $Logfile:$ #* diff --git a/helpcontent2/util/simpress/makefile.mk b/helpcontent2/util/simpress/makefile.mk index 59cd2b2c4a..401491986c 100644 --- a/helpcontent2/util/simpress/makefile.mk +++ b/helpcontent2/util/simpress/makefile.mk @@ -3,9 +3,9 @@ #* $Workfile:$ #* #* Creation date KR 28.06.99 -#* last change $Author: kz $ $Date: 2008-03-07 12:42:02 $ +#* last change $Author: hr $ $Date: 2007-06-26 12:34:21 $ #* -#* $Revision: 1.40 $ +#* $Revision: 1.11 $ #* #* $Logfile:$ #* @@ -930,6 +930,7 @@ LINKLINKFILES= \ text$/shared$/explorer$/database$/menuinsert.xhp \ text$/shared$/explorer$/database$/menutools.xhp \ text$/shared$/explorer$/database$/menuview.xhp \ + text$/shared$/explorer$/database$/migrate_macros.xhp \ text$/shared$/explorer$/database$/password.xhp \ text$/shared$/explorer$/database$/querywizard00.xhp \ text$/shared$/explorer$/database$/querywizard01.xhp \ diff --git a/helpcontent2/util/smath/makefile.mk b/helpcontent2/util/smath/makefile.mk index dca2dc7cef..35bb30c1bc 100644 --- a/helpcontent2/util/smath/makefile.mk +++ b/helpcontent2/util/smath/makefile.mk @@ -3,9 +3,9 @@ #* $Workfile:$ #* #* Creation date KR 28.06.99 -#* last change $Author: kz $ $Date: 2008-03-07 12:42:17 $ +#* last change $Author: hr $ $Date: 2007-06-26 12:34:21 $ #* -#* $Revision: 1.39 $ +#* $Revision: 1.11 $ #* #* $Logfile:$ #* @@ -773,6 +773,7 @@ LINKLINKFILES= \ text$/shared$/explorer$/database$/menuinsert.xhp \ text$/shared$/explorer$/database$/menutools.xhp \ text$/shared$/explorer$/database$/menuview.xhp \ + text$/shared$/explorer$/database$/migrate_macros.xhp \ text$/shared$/explorer$/database$/password.xhp \ text$/shared$/explorer$/database$/querywizard00.xhp \ text$/shared$/explorer$/database$/querywizard01.xhp \ diff --git a/helpcontent2/util/swriter/makefile.mk b/helpcontent2/util/swriter/makefile.mk index f550ef99c5..34961aea14 100644 --- a/helpcontent2/util/swriter/makefile.mk +++ b/helpcontent2/util/swriter/makefile.mk @@ -3,9 +3,9 @@ #* $Workfile:$ #* #* Creation date KR 28.06.99 -#* last change $Author: kz $ $Date: 2008-03-07 12:42:37 $ +#* last change $Author: hr $ $Date: 2007-06-26 12:34:21 $ #* -#* $Revision: 1.42 $ +#* $Revision: 1.11 $ #* #* $Logfile:$ #* @@ -1086,6 +1086,7 @@ LINKLINKFILES= \ text$/shared$/explorer$/database$/menuinsert.xhp \ text$/shared$/explorer$/database$/menutools.xhp \ text$/shared$/explorer$/database$/menuview.xhp \ + text$/shared$/explorer$/database$/migrate_macros.xhp \ text$/shared$/explorer$/database$/password.xhp \ text$/shared$/explorer$/database$/querywizard00.xhp \ text$/shared$/explorer$/database$/querywizard01.xhp \ -- cgit From c6b61710c44abd1b8dda1f3e3736fe6bc19ac1b4 Mon Sep 17 00:00:00 2001 From: Ivo Hinkelmann Date: Tue, 16 Jun 2009 18:11:49 +0000 Subject: CWS-TOOLING: integrate CWS ause102 2009-06-16 19:22:59 +0200 hjs r273039 : #i102607# don't kill mingw 2009-06-12 15:17:22 +0200 ihi r272921 : #i102607# add path before calling l10n tool 2009-06-11 14:25:20 +0200 hjs r272873 : #i102607# on EPM=internal call binary with full path 2009-06-10 13:35:48 +0200 hjs r272807 : #i102607# remove solver PATH entry from OOo env. 2009-06-10 12:10:44 +0200 hjs r272802 : #i102635# correct dependencies for all 2009-06-10 11:58:53 +0200 hjs r272801 : #i102607# call tools from solver with absolute path --- helpcontent2/makefile.pmk | 2 +- helpcontent2/util/target.pmk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'helpcontent2') diff --git a/helpcontent2/makefile.pmk b/helpcontent2/makefile.pmk index ca7843556d..d47e0ae66c 100755 --- a/helpcontent2/makefile.pmk +++ b/helpcontent2/makefile.pmk @@ -44,7 +44,7 @@ $(COMMONMISC)$/{$(aux_alllangiso)}$/$(SHELL_PACKAGE)$/%.xhp :| %.xhp $(COMMONMISC)$/$(TARGET).done : $(HLANGXHPFILES) .IF "$(WITH_LANG)"!="" - @$(AUGMENT_LIBRARY_PATH) helpex -QQ -p helpcontent2 -r $(PRJ) -i @$(mktmp $(uniq $(foreach,i,$? $(!eq,$(i:f),$(i:f:s/.xhp//) $(i:f) $(XHPFILES))))) -x $(COMMONMISC) -y $(SHELL_PACKAGE) -l all -lf $(aux_alllangiso:t",") -m localize.sdf && $(TOUCH) $@ + @$(HELPEX) -QQ -p helpcontent2 -r $(PRJ) -i @$(mktmp $(uniq $(foreach,i,$? $(!eq,$(i:f),$(i:f:s/.xhp//) $(i:f) $(XHPFILES))))) -x $(COMMONMISC) -y $(SHELL_PACKAGE) -l all -lf $(aux_alllangiso:t",") -m localize.sdf && $(TOUCH) $@ .ELSE # "$(WITH_LANG)"!="" .IF "$(USE_SHELL)"=="4nt" # it's getting real ugly... diff --git a/helpcontent2/util/target.pmk b/helpcontent2/util/target.pmk index 6b34104ba8..b126013457 100755 --- a/helpcontent2/util/target.pmk +++ b/helpcontent2/util/target.pmk @@ -39,7 +39,7 @@ JAVA_LIBRARY_PATH= -Djava.library.path=$(SOLARSHAREDBIN) .ENDIF $(LINKALLTARGETS) : $(foreach,i,$(LINKLINKFILES) $(COMMONMISC)$/$$(@:b:s/_/./:e:s/.//)/$i) $(subst,LANGUAGE,$$(@:b:s/_/./:e:s/.//) $(LINKADDEDDEPS)) $(COMMONMISC)$/xhp_changed.flag $(PRJ)$/helpers$/hid.lst - $(AUGMENT_LIBRARY_PATH) $(WRAPCMD) HelpLinker @$(mktmp -mod $(LINKNAME) -hid $(PRJ)$/helpers/hid.lst -src $(COMMONMISC) -sty $(PRJ)$/source$/auxiliary$/embed.xsl -zipdir $(MISC)$/ziptmp$(@:b) -idxcaption $(PRJ)$/source$/auxiliary$/idxcaption.xsl -idxcontent $(PRJ)$/source$/auxiliary$/idxcontent.xsl -lang {$(subst,$(LINKNAME)_, $(@:b))} $(subst,LANGUAGE,{$(subst,$(LINKNAME)_, $(@:b))} $(LINKADDEDFILES)) $(foreach,i,$(LINKLINKFILES) $(COMMONMISC)$/{$(subst,$(LINKNAME)_, $(@:b))}/$i) -o $@) + $(HELPLINKER) @$(mktmp -mod $(LINKNAME) -hid $(PRJ)$/helpers/hid.lst -src $(COMMONMISC) -sty $(PRJ)$/source$/auxiliary$/embed.xsl -zipdir $(MISC)$/ziptmp$(@:b) -idxcaption $(PRJ)$/source$/auxiliary$/idxcaption.xsl -idxcontent $(PRJ)$/source$/auxiliary$/idxcontent.xsl -lang {$(subst,$(LINKNAME)_, $(@:b))} $(subst,LANGUAGE,{$(subst,$(LINKNAME)_, $(@:b))} $(LINKADDEDFILES)) $(foreach,i,$(LINKLINKFILES) $(COMMONMISC)$/{$(subst,$(LINKNAME)_, $(@:b))}/$i) -o $@) .IF "$(SOLAR_JAVA)" == "TRUE" $(JAVAI) $(JAVA_LIBRARY_PATH) -cp "$(my_cp)" com.sun.star.help.HelpIndexer -lang $(@:b:s/_/./:e:s/.//) -mod $(LINKNAME) -zipdir $(MISC)$/ziptmp$(@:b) -o $@ .ELSE -- cgit From 04623c0739fd41eca6382f3534efb5d6332e9bd1 Mon Sep 17 00:00:00 2001 From: Ivo Hinkelmann Date: Wed, 17 Jun 2009 13:15:46 +0000 Subject: CWS-TOOLING: integrate CWS l10ncleanup04 2009-05-28 13:46:54 +0200 ihi r272407 : remove forgotten sdf's 2009-05-25 22:32:35 +0200 ihi r272273 : no WITH_LANG fix 2009-05-25 20:45:58 +0200 ihi r272272 : remove some comments 2009-05-25 19:55:21 +0200 ihi r272271 : svx dialog -> cui l10n move 2009-05-25 18:30:58 +0200 ihi r272268 : build fix 2009-05-18 16:32:02 +0200 ihi r272033 : bash fix 2009-05-18 16:31:32 +0200 ihi r272032 : bash fix 2009-05-14 16:23:39 +0200 ihi r271901 : #i79750# Translation moved to l10n module 2009-05-11 23:36:05 +0200 ihi r271793 : #i79750# Translation moved into own module --- helpcontent2/helpers/update_tree.pl | 44 ++++++++++++++++++++++++++++--- helpcontent2/makefile.pmk | 4 +-- helpcontent2/prj/build.lst | 2 +- helpcontent2/source/auxiliary/makefile.mk | 9 ++++--- 4 files changed, 49 insertions(+), 10 deletions(-) (limited to 'helpcontent2') diff --git a/helpcontent2/helpers/update_tree.pl b/helpcontent2/helpers/update_tree.pl index 36fab9ac5d..ae7dddf0d6 100644 --- a/helpcontent2/helpers/update_tree.pl +++ b/helpcontent2/helpers/update_tree.pl @@ -38,6 +38,10 @@ use File::Copy qw/cp mv/; use File::Basename; use Benchmark; +my $is_win = "false"; + +$is_win = "true" , if ( defined $ENV{USE_SHELL} && $ENV{USE_SHELL} eq "4nt" ); + $t0 = new Benchmark; # update the tree files in /misc/* @@ -60,12 +64,30 @@ $prj =~ s/\\/\//g if defined($prj); $inpath =~ s/\\/\//g; $destpath =~ s/\\/\//g; + if ( ! defined $prj ) { # do someting that works for manual call ($scriptname = `pwd`) =~ s/\n/\/$0/; ($tree_src = $scriptname) =~ s/\/update_tree.pl/\/..\/source\/auxiliary/; ($tree_dest = $scriptname) =~ s/\/update_tree.pl/\/..\/$destpath\/misc/; ($source_dir = $scriptname) =~ s/\/update_tree.pl/\/..\/source/; + if ( defined $ENV{TRYSDF} && defined $ENV{LOCALIZESDF} ) + { + if( defined $ENV{LOCALIZATION_FOUND} && $ENV{LOCALIZATION_FOUND} eq "YES" ) + { + $source_dir = $ENV{TRYSDF}; + } + else + { + $source_dir = $ENV{LOCALIZESDF}; + } + if( $is_win eq "false" ) { $source_dir =~ s/\/auxiliary\/localize.sdf$// ; } + else { $source_dir =~ s/\\auxiliary\\localize.sdf$// ; } + + } + #else {die "ERROR: The env variables TRYSDF LOCALIZATION_FOUND LOCALIZESDF not found ... something is wrong!\n";} + + $treestrings = "$source_dir/text/shared/tree_strings.xhp"; } else { $tree_src = "$prj\/source\/auxiliary"; @@ -73,10 +95,21 @@ if ( ! defined $prj ) { $source_dir = "$prj\/source"; $treestrings = "$source_dir/text/shared/tree_strings.xhp"; - print "$tree_src\n"; - print "$tree_dest\n"; - print "$source_dir\n"; - print "$treestrings\n"; + if ( defined $ENV{TRYSDF} && defined $ENV{LOCALIZESDF} ) + { + if( defined $ENV{LOCALIZATION_FOUND} && $ENV{LOCALIZATION_FOUND} eq "YES" ) + { + $source_dir = $ENV{TRYSDF}; + } + else + { + $source_dir = $ENV{LOCALIZESDF}; + } + if( $is_win eq "false" ) { $source_dir =~ s/\/auxiliary\/localize.sdf$// ; } + else { $source_dir =~ s/\\auxiliary\\localize.sdf$// ; } + } + #else {die "ERROR: The env variables TRYSDF LOCALIZATION_FOUND LOCALIZESDF not found ... something is wrong!\n";} + } # Get the English tree files as master @@ -313,6 +346,9 @@ sub readtv { sub read_loc { print "\n\nReading localized titles..."; $/ = "\n"; + my $path = "$source_dir/text"; + $path =~ s/\//\\/g , if $is_win eq "true"; + print " in $source_dir/text\n"; @files = `find $source_dir/text -name localize.sdf`; for my $fname (@files) { $FS = '\t'; diff --git a/helpcontent2/makefile.pmk b/helpcontent2/makefile.pmk index d47e0ae66c..384d8590f5 100755 --- a/helpcontent2/makefile.pmk +++ b/helpcontent2/makefile.pmk @@ -44,7 +44,7 @@ $(COMMONMISC)$/{$(aux_alllangiso)}$/$(SHELL_PACKAGE)$/%.xhp :| %.xhp $(COMMONMISC)$/$(TARGET).done : $(HLANGXHPFILES) .IF "$(WITH_LANG)"!="" - @$(HELPEX) -QQ -p helpcontent2 -r $(PRJ) -i @$(mktmp $(uniq $(foreach,i,$? $(!eq,$(i:f),$(i:f:s/.xhp//) $(i:f) $(XHPFILES))))) -x $(COMMONMISC) -y $(SHELL_PACKAGE) -l all -lf $(aux_alllangiso:t",") -m localize.sdf && $(TOUCH) $@ + $(AUGMENT_LIBRARY_PATH) $(HELPEX) -QQ -p helpcontent2 -r $(PRJ) -i @$(mktmp $(uniq $(foreach,i,$? $(!eq,$(i:f),$(i:f:s/.xhp//) $(i:f) $(XHPFILES))))) -x $(COMMONMISC) -y $(SHELL_PACKAGE) -l all -lf $(aux_alllangiso:t",") -m $(LOCALIZESDF) && $(TOUCH) $@ .ELSE # "$(WITH_LANG)"!="" .IF "$(USE_SHELL)"=="4nt" # it's getting real ugly... @@ -71,7 +71,7 @@ $(COMMONMISC)$/$(TARGET).done .PHONY : $(COMMONMISC)$/$(TARGET).done : makefile.mk .IF "$(WITH_LANG)"!="" -$(COMMONMISC)$/$(TARGET).done : localize.sdf +$(COMMONMISC)$/$(TARGET).done : $(LOCALIZESDF) .ENDIF # "$(WITH_LANG)"!="" .ENDIF # "$(HELPTRANSPHONY)"!="" .ENDIF # "$(HLANGXHPFILES)"!="" diff --git a/helpcontent2/prj/build.lst b/helpcontent2/prj/build.lst index 7f34e05221..bd5b05a1f9 100644 --- a/helpcontent2/prj/build.lst +++ b/helpcontent2/prj/build.lst @@ -1,4 +1,4 @@ -h2 helpcontent2 : xmlhelp transex3 NULL +h2 helpcontent2 : l10n xmlhelp NULL h2 helpcontent2 usr1 - all helpcontent2_mkout helpcontent2_aux NULL h2 helpcontent2\prj get - all helpcontent2_prj helpcontent2_aux NULL h2 helpcontent2\source\text\sbasic\guide nmake - all helpcontent2_sbas_guid helpcontent2_aux NULL diff --git a/helpcontent2/source/auxiliary/makefile.mk b/helpcontent2/source/auxiliary/makefile.mk index 386d06305c..5f4369adb1 100644 --- a/helpcontent2/source/auxiliary/makefile.mk +++ b/helpcontent2/source/auxiliary/makefile.mk @@ -14,7 +14,7 @@ #************************************************************************* PRJ = ..$/.. -PRJNAME = help2 +PRJNAME = helpcontent2 TARGET = auxiliary # --- Settings ----------------------------------------------------- @@ -33,6 +33,7 @@ TREEFILES = \ # --- Targets ------------------------------------------------------ .INCLUDE : target.mk +.EXPORT : LOCALIZESDF LOCALIZATION_FOUND TRYSDF ALLTAR : aux_dirs $(COMMONMISC)$/treefiles.done $(COMMONBIN)$/helpimg.ilst @@ -58,7 +59,7 @@ LOCTREEFILES:=$(foreach,j,$(TREEFILES) $(COMMONMISC)$/en-US$/$j) .ENDIF #IF "$(WITH_LANG)"!="" $(COMMONMISC)$/treefiles.done : $(LOCTREEFILES) - @$(PERL) $(PRJ)$/helpers$/update_tree.pl && $(TOUCH) $@ + +$(PERL) $(PRJ)$/helpers$/update_tree.pl && $(TOUCH) $@ %.created: @-$(MKDIRHIER) $(@:d) && $(TOUCH) $@ @@ -67,7 +68,9 @@ $(LOCTREEFILES) : $(TREEFILES) $$(@:d)$/dir.created @$(TOUCH) $@ .IF "$(WITH_LANG)"!="" -$(LOCTREEFILES) : $(PRJ)$/source$/text$/shared$/localize.sdf +#$(LOCTREEFILES) : $(PRJ)$/source$/text$/shared$/localize.sdf +$(LOCTREEFILES) : $(LOCALIZESDF:d:d:d:d)$/text$/shared/localize.sdf +$(LOCALIZESDF:d:d:d:d)$/text$/shared/localize.sdf : $(LOCALIZESDF) .ENDIF # "$(WITH_LANG)"!="" aux_dirs .PHONY : -- cgit From df4b38d7a9ae2dddc52ab794e89b3a4d31c67af5 Mon Sep 17 00:00:00 2001 From: Release Engineers Date: Thu, 2 Jul 2009 19:17:43 +0000 Subject: CWS-TOOLING: integrate CWS bubblechart 2009-06-17 08:41:14 +0200 hde r273051 : i101635: added new charttype bubble 2009-06-17 08:39:37 +0200 hde r273050 : i101635: created new testcase tCreateNewBubbleChart 2009-06-17 08:38:07 +0200 hde r273049 : i101635: created new testcase tCreateNewBubbleChart 2009-06-15 15:22:32 +0200 hde r272991 : 101635 2009-06-11 12:44:01 +0200 iha r272864 : rebase to dev300m50 2009-06-10 23:27:54 +0200 iha r272841 : CWS-TOOLING: rebase CWS bubblechart to trunk@272827 (milestone: DEV300:m50) 2009-06-04 18:07:35 +0200 iha r272649 : #i64689# Bubble Chart 2009-06-04 17:26:44 +0200 iha r272647 : #i64689# Bubble Chart 2009-06-04 11:24:25 +0200 iha r272618 : #i64689# add more spacing between bubbles and data labels 2009-05-26 18:05:23 +0200 ufi r272314 : i101637 2009-04-22 14:37:50 +0200 iha r271115 : #i64689# bubble chart 2009-04-21 17:52:23 +0200 iha r271052 : #i64689# bubble chart 2009-04-21 17:50:48 +0200 iha r271051 : #i76728# type icon for xy chart 2009-04-21 17:25:52 +0200 iha r271049 : #i76728# type icon for xy chart 2009-04-09 11:18:09 +0200 iha r270685 : #i100977# autoscaling works not correct if missing values should be treated as zero 2009-04-08 16:39:43 +0200 iha r270656 : #i64689# bubble chart - missing value treatment 2009-04-08 15:13:25 +0200 iha r270655 : #i64689# bubble chart - remove unused code 2009-04-08 15:12:19 +0200 iha r270653 : #i64689# bubble chart - determine sereis length correctly on export 2009-04-08 14:22:43 +0200 iha r270650 : #i64689# bubble chart - remove unused code 2009-04-08 14:12:09 +0200 iha r270646 : #i64689# bubble chart - export domains even if no main sequence was found 2009-04-08 14:11:07 +0200 iha r270645 : #i64689# bubble chart - don't replace missing size values with 1.0 2009-04-07 16:20:22 +0200 iha r270602 : #i64689# bubble chart - do not offer percent values for data label display for xy and bubble chart 2009-04-07 16:17:42 +0200 iha r270601 : remove superfluous code 2009-04-06 16:39:32 +0200 iha r270569 : #i64689# bubble chart -correct automatic numberformat detection for axis, data table and data label + transport data label numberformat during copy paste in addition to axis numberformat 2009-04-02 17:33:33 +0200 iha r270427 : use input string for formatting in data table during edit 2009-04-02 16:00:29 +0200 iha r270413 : #i64689# bubble chart - when creating a new series within the data table give it the same number format as the former series, thus the new bubble size values can be edited with the same format immidiately 2009-04-02 11:25:33 +0200 iha r270385 : #i64689# bubble chart -correct automatic numberformat detection for axis, data table and data label + transport data label numberformat during copy paste in addition to axis numberformat 2009-04-01 11:32:03 +0200 iha r270312 : #i64689# bubble chart - add further parameter for view creation 2009-03-31 17:52:08 +0200 iha r270291 : #i64689# bubble chart - scale bubble size with diagram size 2009-03-31 13:38:13 +0200 iha r270278 : #i64689# bubble chart - wrong size for small values < 1 2009-03-27 19:11:07 +0100 iha r270169 : #i64689# bubble chart 2009-03-27 19:07:11 +0100 iha r270168 : #i64689# bubble chart - remove unused code 2009-03-27 18:33:57 +0100 iha r270167 : #i64689# bubble chart - create no shape for invalid sizes 2009-03-27 15:18:21 +0100 iha r270157 : #i76728# type icon for xy chart 2009-03-27 14:34:38 +0100 iha r270156 : #i64689# bubble chart - correct scaling 2009-03-27 14:27:27 +0100 iha r270155 : #i64689# bubble chart - images 2009-03-27 14:25:45 +0100 iha r270154 : #i64689# bubble chart - images 2009-03-27 11:38:57 +0100 iha r270142 : #i64689# bubble chart - values-size is the main series 2009-03-27 11:30:20 +0100 iha r270140 : #i64689# correct order of sequences after load thus switching charttypes afterwards produces expected results now 2009-03-26 10:22:55 +0100 iha r270056 : #i64689# bubble chart 2009-03-24 17:45:15 +0100 iha r269984 : #i64689# bubble chart - user properties from points (not only from the series) 2009-03-24 15:10:57 +0100 dr r269954 : #i64989# export bubble charts to xls 2009-03-24 14:55:29 +0100 dr r269952 : #i64989# import bubble charts from xls 2009-03-24 14:54:46 +0100 dr r269950 : #i64989# import bubble charts from ooxml 2009-03-23 18:59:08 +0100 iha r269895 : further cleanups possible with new member m_aGlobalSeriesImportInfo 2009-03-23 16:54:04 +0100 iha r269886 : #i64689# bubble chart - a single sequence must be interpreted as sizes because of ODF specification 2009-03-23 16:50:43 +0100 iha r269885 : #i64689# save&load bubble chart 2009-03-20 19:30:29 +0100 iha r269826 : CWS-TOOLING: rebase CWS bubblechart to trunk@269781 (milestone: DEV300:m44) 2009-03-19 11:30:33 +0100 iha r269732 : #i64689# rename SchXMLCategoriesDomainContext to SchXMLCategoriesContext avoid confusion with domains 2009-03-18 17:11:13 +0100 iha r269693 : #i64689# add charttype bubble 2009-03-18 17:09:22 +0100 iha r269692 : #i64689# remove unused code 2009-03-13 12:18:26 +0100 iha r269467 : #i64689# corrected lineends 2009-03-12 11:25:14 +0100 iha r269376 : #i64689# bubble chart (part 1) --- .../source/text/schart/01/choose_chart_type.xhp | 222 +++++++++++---------- helpcontent2/source/text/schart/01/makefile.mk | 1 + helpcontent2/source/text/schart/01/type_bubble.xhp | 64 ++++++ .../source/text/schart/01/wiz_data_series.xhp | 2 +- helpcontent2/util/scalc/makefile.mk | 1 + helpcontent2/util/schart/makefile.mk | 1 + helpcontent2/util/sdraw/makefile.mk | 1 + helpcontent2/util/simpress/makefile.mk | 1 + helpcontent2/util/swriter/makefile.mk | 1 + 9 files changed, 185 insertions(+), 109 deletions(-) create mode 100644 helpcontent2/source/text/schart/01/type_bubble.xhp (limited to 'helpcontent2') diff --git a/helpcontent2/source/text/schart/01/choose_chart_type.xhp b/helpcontent2/source/text/schart/01/choose_chart_type.xhp index 3e69cabfa2..9e620e4509 100644 --- a/helpcontent2/source/text/schart/01/choose_chart_type.xhp +++ b/helpcontent2/source/text/schart/01/choose_chart_type.xhp @@ -1,8 +1,8 @@ - - + + + - - -Choosing a Chart Type -/text/schart/01/choose_chart_type.xhp - - -Sun Microsystems, Inc. -new file - - - -Choosing a Chart Type + + Choosing a Chart Type + /text/schart/01/choose_chart_type.xhp + + + + Choosing a Chart Type -On the first page of the Chart Wizard you can choose a chart type. -
- -
-The available chart types -Choose from the following chart types, depending on data type and intended presentation effect. - - - - -Icon + On the first page of the Chart Wizard you can choose a chart type. +
+ +
+ The available chart types + Choose from the following chart types, depending on data type and intended presentation effect. +
+ + + +Icon and -Icon +Icon + + + + Column or Bar + + + + + +Icon - - -Column or Bar - - - - - -Icon + + + Pie + + + + + +Icon - - -Pie - - - - - -Icon + + + Area + + + + + +Icon - - -Area - - - - - -Icon + + + Line + + + + + +Icon - - -Line - - - - - -Icon + + + XY (scatter) + + + + + +Icon - - -XY (scatter) - - - - - -Icon + + + Bubble + + + + + +Icon - - -Net - - - - - -Icon + + + Net + + + + + +Icon - - -Stock - - - - - -Icon + + + Stock + + + + + +Icon - - -Column and Line - - -
+ + + Column and Line + + + -  -
- - - - - -
- - +   +
+ + + + + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/schart/01/makefile.mk b/helpcontent2/source/text/schart/01/makefile.mk index 4462fa3641..3b96c095bb 100644 --- a/helpcontent2/source/text/schart/01/makefile.mk +++ b/helpcontent2/source/text/schart/01/makefile.mk @@ -81,6 +81,7 @@ XHPFILES = \ smooth_line_properties.xhp \ three_d_view.xhp \ type_area.xhp \ + type_bubble.xhp \ type_column_bar.xhp \ type_column_line.xhp \ type_line.xhp \ diff --git a/helpcontent2/source/text/schart/01/type_bubble.xhp b/helpcontent2/source/text/schart/01/type_bubble.xhp new file mode 100644 index 0000000000..e83ce0a204 --- /dev/null +++ b/helpcontent2/source/text/schart/01/type_bubble.xhp @@ -0,0 +1,64 @@ + + + + + + + + + Chart Type Bubble + /text/schart/01/type_bubble.xhp + + + +bubble charts + chart types;bubble + +Chart Type Bubble + + On the first page of the Chart Wizard you can choose a chart type. +
+ +
+ Bubble + A bubble chart shows the relations of three variables. Two variables are used for the position on the X-axis and Y-axis, while the third variable is shown as the relative size of each bubble. + The data series dialog for a bubble chart has an entry to define the data range for the Bubble Sizes. +
+ + + + + +
+ + \ No newline at end of file diff --git a/helpcontent2/source/text/schart/01/wiz_data_series.xhp b/helpcontent2/source/text/schart/01/wiz_data_series.xhp index 8821799be4..acbdad418e 100644 --- a/helpcontent2/source/text/schart/01/wiz_data_series.xhp +++ b/helpcontent2/source/text/schart/01/wiz_data_series.xhp @@ -83,7 +83,7 @@ Enter the range or click Select data range to minimize the dialog and select the range with the mouse. -If you want a data range of multiple cell areas that are not next to each other, enter the first range, then manually add a semikolon at the end of the text box, then enter the other ranges. Use a semikolon as delimiter between ranges.UFI: not sure if you can use the mouse to "enter the other ranges". May be you must use the keyboard. +If you want a data range of multiple cell areas that are not next to each other, enter the first range, then manually add a semicolon at the end of the text box, then enter the other ranges. Use a semicolon as delimiter between ranges. The range for a data role, like Y-Values, must not include a label cell. diff --git a/helpcontent2/util/scalc/makefile.mk b/helpcontent2/util/scalc/makefile.mk index 95354644d9..a0abd38235 100644 --- a/helpcontent2/util/scalc/makefile.mk +++ b/helpcontent2/util/scalc/makefile.mk @@ -1288,6 +1288,7 @@ LINKLINKFILES= \ text$/schart$/01$/smooth_line_properties.xhp \ text$/schart$/01$/three_d_view.xhp \ text$/schart$/01$/type_area.xhp \ + text$/schart$/01$/type_bubble.xhp \ text$/schart$/01$/type_column_bar.xhp \ text$/schart$/01$/type_column_line.xhp \ text$/schart$/01$/type_line.xhp \ diff --git a/helpcontent2/util/schart/makefile.mk b/helpcontent2/util/schart/makefile.mk index 038298cefc..4b682e80ae 100644 --- a/helpcontent2/util/schart/makefile.mk +++ b/helpcontent2/util/schart/makefile.mk @@ -977,6 +977,7 @@ LINKLINKFILES= \ text$/schart$/01$/smooth_line_properties.xhp \ text$/schart$/01$/three_d_view.xhp \ text$/schart$/01$/type_area.xhp \ + text$/schart$/01$/type_bubble.xhp \ text$/schart$/01$/type_column_bar.xhp \ text$/schart$/01$/type_column_line.xhp \ text$/schart$/01$/type_line.xhp \ diff --git a/helpcontent2/util/sdraw/makefile.mk b/helpcontent2/util/sdraw/makefile.mk index e093d521d8..90a06abc2c 100644 --- a/helpcontent2/util/sdraw/makefile.mk +++ b/helpcontent2/util/sdraw/makefile.mk @@ -1210,6 +1210,7 @@ LINKLINKFILES= \ text$/schart$/01$/smooth_line_properties.xhp \ text$/schart$/01$/three_d_view.xhp \ text$/schart$/01$/type_area.xhp \ + text$/schart$/01$/type_bubble.xhp \ text$/schart$/01$/type_column_bar.xhp \ text$/schart$/01$/type_column_line.xhp \ text$/schart$/01$/type_line.xhp \ diff --git a/helpcontent2/util/simpress/makefile.mk b/helpcontent2/util/simpress/makefile.mk index 401491986c..d35e5a5c45 100644 --- a/helpcontent2/util/simpress/makefile.mk +++ b/helpcontent2/util/simpress/makefile.mk @@ -1212,6 +1212,7 @@ LINKLINKFILES= \ text$/schart$/01$/smooth_line_properties.xhp \ text$/schart$/01$/three_d_view.xhp \ text$/schart$/01$/type_area.xhp \ + text$/schart$/01$/type_bubble.xhp \ text$/schart$/01$/type_column_bar.xhp \ text$/schart$/01$/type_column_line.xhp \ text$/schart$/01$/type_line.xhp \ diff --git a/helpcontent2/util/swriter/makefile.mk b/helpcontent2/util/swriter/makefile.mk index 34961aea14..eba406d561 100644 --- a/helpcontent2/util/swriter/makefile.mk +++ b/helpcontent2/util/swriter/makefile.mk @@ -1368,6 +1368,7 @@ LINKLINKFILES= \ text$/schart$/01$/smooth_line_properties.xhp \ text$/schart$/01$/three_d_view.xhp \ text$/schart$/01$/type_area.xhp \ + text$/schart$/01$/type_bubble.xhp \ text$/schart$/01$/type_column_bar.xhp \ text$/schart$/01$/type_column_line.xhp \ text$/schart$/01$/type_line.xhp \ -- cgit