Edit Points

Lets you change the shape of the selected drawing object.

diff --git a/source/text/shared/02/eliminate_points.xhp b/source/text/shared/02/eliminate_points.xhp new file mode 100644 index 0000000000..264526c294 --- /dev/null +++ b/source/text/shared/02/eliminate_points.xhp @@ -0,0 +1,52 @@ + + + + + + + Eliminate Points + /text/shared/02/eliminate_points.xhp + + + + + +bezier; eliminate points +polygon; eliminate points +curves; eliminate points + + + + +

Eliminate Points

+ +Enables Eliminate Points mode. If this mode is enabled, you can remove a point by dragging and dropping it onto a space directly between two points that adjoin the point you are eliminating. +

+ +

+Choose Draw - Eliminate points. +

+ +To remove a point, left-click on the shape you want to edit, the left-click on the point you want to remove, and drag it to a place directly between the two adjoining points until it snaps into place. + +You can adjust how close the point needs to be before it snaps into place by adjusting the Point reduction angle in the Grid settings dialog. The lower the angle, the closer the point needs to be before it snaps into place. + +

+ + + \ No newline at end of file diff --git a/source/text/shared/main0227.xhp b/source/text/shared/main0227.xhp index 63cdadfeee..e410bb18bb 100644 --- a/source/text/shared/main0227.xhp +++ b/source/text/shared/main0227.xhp @@ -31,19 +31,13 @@ Edit Points bar -

Edit Points Bar

The Edit Points Bar appears when you select a polygon object and click Edit Points. -

- -

- - The functions provided allow you to edit the points of a curve or an object converted to a curve. The following icons are available: -

Edit Points

-The Edit Points icon allows you to activate or deactivate the edit mode for Bézier objects. In the edit mode, individual points of the drawing object can be selected. - + + +

@@ -54,10 +48,17 @@

+ + + +

Move Points

Activates a mode in which you can move points. The mouse pointer displays a small empty square when resting on a point. Drag that point to another location. The curve on both sides of the point follows the movement; the section of the curve between the next points changes shape. Point at the curve between two points or within a closed curve and drag the mouse to shift the entire curve without distorting the form. +

+ +

@@ -69,10 +70,17 @@

+ + +

Insert Points

Activates the insert mode. This mode allows you to insert points. You can also move points, just as in the move mode. If, however, you click at the curve between two points and move the mouse a little while holding down the mouse button you insert a new point. The point is a smooth point, and the lines to the control points are parallel and remain so when moved. If you wish to create a corner point you must first insert either a smooth or a symmetrical point which is then converted to a corner point by using Corner Point. +

+ +

@@ -84,10 +92,17 @@

+ + +

Delete Points

Use the Delete Points icon to delete one or several selected points. If you wish to select several points click the appropriate points while holding down the Shift key. First select the points to be deleted, and then click this icon, or press Del. +

+ +

@@ -99,9 +114,16 @@

+ + +

Split Curve

The Split Curve icon splits a curve. Select the point or points where you want to split the curve, then click the icon. +

+ +

@@ -113,10 +135,17 @@

+ + +

Convert To Curve

Converts a curve into a straight line or converts a straight line into a curve. If you select a single point, the curve before the point will be converted. If two points are selected, the curve between both points will be converted. If you select more than two points, each time you click this icon, a different portion of the curve will be converted. If necessary, round points are converted into corner points and corner points are converted into round points. If a certain section of the curve is straight, the end points of the line have a maximum of one control point each. They cannot be modified to round points unless the straight line is converted back to a curve. +

+ +

@@ -128,9 +157,16 @@

+ + +

Corner Point

Converts the selected point or points into corner points. Corner points have two movable control points, which are independent from each other. A curved line, therefore, does not go straight through a corner point, but forms a corner. +

+ +

@@ -142,9 +178,16 @@

+ + +

Smooth Transition

Converts a corner point or symmetrical point into a smooth point. Both control points of the corner point are aligned in parallel, and can only be moved simultaneously. The control points may differentiate in length, allowing you to vary the degree of curvature. +

+ +

@@ -156,9 +199,16 @@

+ + +

Symmetric Transition

This icon converts a corner point or a smooth point into a symmetrical point. Both control points of the corner point are aligned in parallel and have the same length. They can only be moved simultaneously and the degree of curvature is the same in both directions. +

+ +

@@ -170,9 +220,16 @@

+ + +

Close Bézier

Closes a line or a curve. A line is closed by connecting the last point with the first point, indicated by an enlarged square. +

+ +

@@ -184,9 +241,11 @@

- -

Eliminate Points

-Marks the current point or the selected points for deletion. This happens in the event that the point is located on a straight line. If you convert a curve or a polygon with the Convert to Curve icon into a straight line or you change a curve with the mouse so that a point lies on the straight line, it is removed. The angle from which the point reduction is to take place can be set by choosing %PRODUCTNAME Draw - Grid in the Options dialog boxcan be set by choosing %PRODUCTNAME Impress - Grid in the Options dialog boxis 15° by default. +

+ +

@@ -198,5 +257,12 @@

+ +

diff --git a/source/text/simpress/02/10080000.xhp b/source/text/simpress/02/10080000.xhp index a83fc39e9f..16d1b45b0c 100644 --- a/source/text/simpress/02/10080000.xhp +++ b/source/text/simpress/02/10080000.xhp @@ -22,7 +22,7 @@ -Curve +Curves and Polygons /text/simpress/02/10080000.xhp @@ -40,8 +40,8 @@

Curve

-The Curve icon on the Drawing bar opens the Lines toolbar, where you can add lines and shapes to the current slide. +

Curves and Polygons

+The Curves and Polygons icon on the Drawing bar opens the Lines toolbar, where you can add lines and shapes to the current slide.

If you hold the Shift key down, the movement of the mouse is limited to multiples of 45 degrees. If you hold down the OptionsAlt key, the new point will not be connected to the last point. This allows you to create objects that consist of curves that are not connected together. If you draw a smaller object while holding down the OptionAlt key into a larger object that you have not closed yet, the smaller object is subtracted from the larger one, thus appearing as a hole in the larger one. Closed shapes automatically receive the fill that is displayed in the Area Style/Filling box on Line and Filling bar. -- cgit