update translations for master

and force-fix errors using pocheck

Change-Id: I3c00491e0ea0ac65e61a006108fd80d6188b16d0

1 files changed, 131 insertions, 23 deletions

diff --git a/source/zh-CN/svx/messages.po b/source/zh-CN/svx/messages.po
index ea9b7ed3358..95e3ac579fc 100644
--- a/source/zh-CN/svx/messages.po
+++ b/source/zh-CN/svx/messages.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: https://bugs.libreoffice.org/enter_bug.cgi?product=LibreOffice&bug_status=UNCONFIRMED&component=UI\n"
-"POT-Creation-Date: 2020-08-17 12:39+0200\n"
+"POT-Creation-Date: 2020-08-21 17:59+0200\n"
 "PO-Revision-Date: 2020-07-04 09:02+0000\n"
 "Last-Translator: Ming Hua <plateauwolf@qq.com>\n"
 "Language-Team: Chinese (Simplified) <https://weblate.documentfoundation.org/projects/libo_ui-master/svxmessages/zh_Hans/>\n"
@@ -16242,138 +16242,246 @@ msgctxt "optgridpage|usegridsnap"
 msgid "_Snap to grid"
 msgstr "贴齐网格(_S)"
 
+#. bYzG9
+#: svx/uiconfig/ui/optgridpage.ui:83
+msgctxt "extended_tip|usegridsnap"
+msgid "Specifies whether to move frames, drawing elements, and controls only between grid points."
+msgstr "指定是否仅在网格点之间移动框架、绘图元素和控件。"
+
 #. nQZB9
-#: svx/uiconfig/ui/optgridpage.ui:89
+#: svx/uiconfig/ui/optgridpage.ui:94
 msgctxt "optgridpage|gridvisible"
 msgid "_Visible grid"
 msgstr "网格可见(_V)"
 
+#. nxP8s
+#: svx/uiconfig/ui/optgridpage.ui:103
+msgctxt "extended_tip|gridvisible"
+msgid "Specifies whether to display the grid."
+msgstr "指定是否显示网格"
+
 #. qpLqx
-#: svx/uiconfig/ui/optgridpage.ui:110
+#: svx/uiconfig/ui/optgridpage.ui:120
 msgctxt "optgridpage|label1"
 msgid "Grid"
 msgstr "网格"
 
+#. GhA8G
+#: svx/uiconfig/ui/optgridpage.ui:168
+msgctxt "extended_tip|mtrflddrawx"
+msgid "Defines the unit of measure for the spacing between grid points on the X-axis."
+msgstr "定义网格点间距在 X 轴的度量单位。"
+
+#. fPCcF
+#: svx/uiconfig/ui/optgridpage.ui:186
+msgctxt "extended_tip|mtrflddrawy"
+msgid "Defines the grid points spacing in the desired unit of measurement on the Y-axis."
+msgstr "以所需的度量单位定义网格点在 Y 轴间距。"
+
 #. LEFVP
-#: svx/uiconfig/ui/optgridpage.ui:179
+#: svx/uiconfig/ui/optgridpage.ui:199
 msgctxt "optgridpage|flddrawx"
 msgid "H_orizontal:"
 msgstr "水平(_O):"
 
 #. 63XA8
-#: svx/uiconfig/ui/optgridpage.ui:193
+#: svx/uiconfig/ui/optgridpage.ui:213
 msgctxt "optgridpage|flddrawy"
 msgid "_Vertical:"
 msgstr "垂直(_V):"
 
 #. BE8cX
-#: svx/uiconfig/ui/optgridpage.ui:205
+#: svx/uiconfig/ui/optgridpage.ui:225
 msgctxt "optgridpage|synchronize"
 msgid "Synchronize a_xes"
 msgstr "同步轴(_X)"
 
+#. TFU5G
+#: svx/uiconfig/ui/optgridpage.ui:235
+msgctxt "extended_tip|synchronize"
+msgid "Specifies whether to change the current grid settings symmetrically."
+msgstr "指定是否对称地修改当前的网格设置。"
+
 #. We62K
-#: svx/uiconfig/ui/optgridpage.ui:228
+#: svx/uiconfig/ui/optgridpage.ui:253
 msgctxt "optgridpage|label2"
 msgid "Resolution"
 msgstr "分辨率"
 
+#. QBM3z
+#: svx/uiconfig/ui/optgridpage.ui:300
+msgctxt "extended_tip|numflddivisionx"
+msgid "Specify the number of intermediate spaces between grid points on the X-axis."
+msgstr "指定 X 轴上网格点之间的中间点数。"
+
 #. jt7BC
-#: svx/uiconfig/ui/optgridpage.ui:283
+#: svx/uiconfig/ui/optgridpage.ui:313
 msgctxt "optgridpage|label4"
 msgid "space(s)"
 msgstr "个空格"
 
+#. hNLHu
+#: svx/uiconfig/ui/optgridpage.ui:340
+msgctxt "extended_tip|numflddivisiony"
+msgid "Specify the number of intermediate spaces between grid points on the Y-axis."
+msgstr "指定 Y 轴上网格点之间的中间点数。"
+
 #. hGSLw
-#: svx/uiconfig/ui/optgridpage.ui:318
+#: svx/uiconfig/ui/optgridpage.ui:353
 msgctxt "optgridpage|label5"
 msgid "space(s)"
 msgstr "个空格"
 
 #. NiUFW
-#: svx/uiconfig/ui/optgridpage.ui:336
+#: svx/uiconfig/ui/optgridpage.ui:371
 msgctxt "optgridpage|divisionx"
 msgid "Horizont_al:"
 msgstr "水平(_A):"
 
 #. EXXsP
-#: svx/uiconfig/ui/optgridpage.ui:350
+#: svx/uiconfig/ui/optgridpage.ui:385
 msgctxt "optgridpage|divisiony"
 msgid "V_ertical:"
 msgstr "垂直(_E):"
 
 #. DnrET
-#: svx/uiconfig/ui/optgridpage.ui:368
+#: svx/uiconfig/ui/optgridpage.ui:403
 msgctxt "optgridpage|label3"
 msgid "Subdivision"
 msgstr "细分"
 
 #. Bk6ie
-#: svx/uiconfig/ui/optgridpage.ui:413
+#: svx/uiconfig/ui/optgridpage.ui:448
 msgctxt "optgridpage|snaphelplines"
 msgid "To snap lines"
 msgstr "至吸附线"
 
+#. R4rYx
+#: svx/uiconfig/ui/optgridpage.ui:457
+msgctxt "extended_tip|snaphelplines"
+msgid "Snaps the edge of a dragged object to the nearest snap line when you release the mouse."
+msgstr ""
+
 #. YkLQN
-#: svx/uiconfig/ui/optgridpage.ui:428
+#: svx/uiconfig/ui/optgridpage.ui:468
 msgctxt "optgridpage|snapborder"
 msgid "To the _page margins"
 msgstr "至页边(_P)"
 
+#. ifSGq
+#: svx/uiconfig/ui/optgridpage.ui:477
+msgctxt "extended_tip|snapborder"
+msgid "Specifies whether to align the contour of the graphic object to the nearest page margin."
+msgstr ""
+
 #. GhDiX
-#: svx/uiconfig/ui/optgridpage.ui:443
+#: svx/uiconfig/ui/optgridpage.ui:488
 msgctxt "optgridpage|snapframe"
 msgid "To object _frame"
 msgstr "至对象框架(_F)"
 
+#. n3JDW
+#: svx/uiconfig/ui/optgridpage.ui:497
+msgctxt "extended_tip|snapframe"
+msgid "Specifies whether to align the contour of the graphic object to the border of the nearest graphic object."
+msgstr ""
+
 #. akbks
-#: svx/uiconfig/ui/optgridpage.ui:458
+#: svx/uiconfig/ui/optgridpage.ui:508
 msgctxt "optgridpage|snappoints"
 msgid "To obje_ct points"
 msgstr "至对象点(_C)"
 
+#. BCxLX
+#: svx/uiconfig/ui/optgridpage.ui:517
+msgctxt "extended_tip|snappoints"
+msgid "Specifies whether to align the contour of the graphic object to the points of the nearest graphic object."
+msgstr ""
+
+#. rY7Uu
+#: svx/uiconfig/ui/optgridpage.ui:539
+msgctxt "extended_tip|mtrfldsnaparea"
+msgid "Defines the snap distance between the mouse pointer and the object contour. %PRODUCTNAME Impress snaps to a snap point if the mouse pointer is nearer than the distance selected in the Snap range control."
+msgstr "定义鼠标指针与对象轮廓之间的吸附距离。当鼠标指针位于「吸附范围」控件所指定的距离内，%PRODUCTNAME Impress 会贴齐到吸附点。"
+
 #. FekAR
-#: svx/uiconfig/ui/optgridpage.ui:492
+#: svx/uiconfig/ui/optgridpage.ui:552
 msgctxt "optgridpage|label7"
 msgid "_Snap range:"
 msgstr "吸附距离(_S):"
 
 #. 77X8u
-#: svx/uiconfig/ui/optgridpage.ui:516
+#: svx/uiconfig/ui/optgridpage.ui:576
 msgctxt "optgridpage|label6"
 msgid "Snap"
 msgstr "贴齐"
 
 #. MVezU
-#: svx/uiconfig/ui/optgridpage.ui:550
+#: svx/uiconfig/ui/optgridpage.ui:610
 msgctxt "optgridpage|ortho"
 msgid "_When creating or moving objects"
 msgstr "创建或移动对象时(_W)"
 
+#. sCZdK
+#: svx/uiconfig/ui/optgridpage.ui:619
+msgctxt "extended_tip|ortho"
+msgid "Specifies that graphic objects are restricted vertically, horizontally or diagonally (45°) when creating or moving them."
+msgstr "指定在创建或移动图形对象时应用的约束方式: 水平、垂直或对角 (45°)。"
+
 #. SK5Pc
-#: svx/uiconfig/ui/optgridpage.ui:565
+#: svx/uiconfig/ui/optgridpage.ui:630
 msgctxt "optgridpage|bigortho"
 msgid "_Extend edges"
 msgstr "拓宽边界(_E)"
 
+#. UxXn5
+#: svx/uiconfig/ui/optgridpage.ui:639
+msgctxt "extended_tip|bigortho"
+msgid "Specifies that a square is created based on the longer side of a rectangle when the Shift key is pressed before you release the mouse button. This also applies to an ellipse (a circle will be created based on the longest diameter of the ellipse). When the Extend edges box is not marked, a square or a circle will be created based on the shorter side or diameter."
+msgstr "指定在释放鼠标按钮之前按下 Shift 键，则基于矩形较长的边建立一个正方形。此选项对椭圆也同样适用 (基于椭圆最长的直径建立一个圆)。如果没有选中「拓宽边界」复选框，则会基于较短的边或直径建立正方形或圆。"
+
+#. UmDxR
+#: svx/uiconfig/ui/optgridpage.ui:665
+msgctxt "extended_tip|mtrfldangle"
+msgid "Specifies that graphic objects can only be rotated within the rotation angle that you selected in the When rotating control."
+msgstr "指定图形对象只能按照您在「旋转时」控件中选中的旋转角度进行旋转。"
+
 #. a6oQ8
-#: svx/uiconfig/ui/optgridpage.ui:601
+#: svx/uiconfig/ui/optgridpage.ui:676
 msgctxt "optgridpage|rotate"
 msgid "When ro_tating:"
 msgstr "旋转时(_T):"
 
+#. 8qf9r
+#: svx/uiconfig/ui/optgridpage.ui:688
+msgctxt "extended_tip|rotate"
+msgid "Specifies that graphic objects can only be rotated within the rotation angle that you selected in the When rotating control."
+msgstr "指定图形对象只能按照您在「旋转时」控件中选中的旋转角度进行旋转。"
+
+#. xEPJC
+#: svx/uiconfig/ui/optgridpage.ui:706
+msgctxt "extended_tip|mtrfldbezangle"
+msgid "Defines the angle for point reduction."
+msgstr "定义接点缩减的角度。"
+
 #. hEA4g
-#: svx/uiconfig/ui/optgridpage.ui:634
+#: svx/uiconfig/ui/optgridpage.ui:719
 msgctxt "optgridpage|label9"
 msgid "Point reducti_on:"
 msgstr "降低点数(_O):"
 
 #. JZEyB
-#: svx/uiconfig/ui/optgridpage.ui:658
+#: svx/uiconfig/ui/optgridpage.ui:743
 msgctxt "optgridpage|label8"
 msgid "Constrain Objects"
 msgstr "约束对象"
 
+#. AWmiJ
+#: svx/uiconfig/ui/optgridpage.ui:765
+msgctxt "extended_tip|OptGridPage"
+msgid "Specifies the settings for the configurable grid on your document pages. This grid helps you determine the exact position of your objects. You can also set this grid in line with the \"magnetic\" snap grid."
+msgstr "指定文档页面上可配置网格的设置。此网格有助于确定对象的精确位置。可以同时启用此网格与「磁性」吸附式辅助网格。"
+
 #. rYzct
 #: svx/uiconfig/ui/paralinespacingcontrol.ui:17
 msgctxt "paralinespacingcontrol|spacing_1"