diff options
Diffstat (limited to 'source/zh-TW/sc/messages.po')
| -rw-r--r-- | source/zh-TW/sc/messages.po | 3357 |
1 files changed, 1747 insertions, 1610 deletions
diff --git a/source/zh-TW/sc/messages.po b/source/zh-TW/sc/messages.po index fa199995e1f..5c1e8a6bdab 100644 --- a/source/zh-TW/sc/messages.po +++ b/source/zh-TW/sc/messages.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: https://bugs.libreoffice.org/enter_bug.cgi?product=LibreOffice&bug_status=UNCONFIRMED&component=UI\n" -"POT-Creation-Date: 2020-12-01 12:34+0100\n" +"POT-Creation-Date: 2021-01-14 18:09+0100\n" "PO-Revision-Date: 2020-12-13 09:36+0000\n" "Last-Translator: Cheng-Chia Tseng <pswo10680@gmail.com>\n" "Language-Team: Chinese (Traditional) <https://weblate.documentfoundation.org/projects/libo_ui-master/scmessages/zh_Hant/>\n" @@ -13,7 +13,7 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Accelerator-Marker: ~\n" -"X-Generator: Weblate 4.1.1\n" +"X-Generator: LibreOffice\n" "X-POOTLE-MTIME: 1557418135.000000\n" #. kBovX @@ -982,19 +982,18 @@ msgctxt "STR_NEWTABNAMENOTUNIQUE" msgid "This name already exists." msgstr "這個名稱已被他者使用。" -#. yRu3x +#. YGuxL #: sc/inc/globstr.hrc:184 msgctxt "STR_INVALIDTABNAME" msgid "" "Invalid sheet name.\n" -"The sheet name must not be empty or a duplicate of \n" -"an existing name and may not contain the characters [ ] * ? : / \\ \n" -"or the character ' (apostrophe) as first or last character." +"\n" +"The sheet name must not:\n" +"• be empty\n" +"• already exist\n" +"• contain [ ] * ? : / \\ \n" +"• use ' (apostrophe) as first or last character." msgstr "" -"無效的工作表名稱。\n" -"工作表名稱不能空白或和現有名稱重複，\n" -"亦不能包含 [ ] * ? : / \\ 等字元，\n" -"或將 ' 字 (撇號) 作為第一或最末字元。" #. CGAdE #: sc/inc/globstr.hrc:185 @@ -18490,157 +18489,157 @@ msgid "Closes dialog and discards all changes." msgstr "" #. v3B8V -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:125 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:119 msgctxt "advancedfilterdialog|extended_tip|rbfilterarea" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. yFS2F -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:140 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:134 msgctxt "advancedfilterdialog|extended_tip|lbfilterarea" msgid "Select the named range, or enter the cell range that contains the filter criteria that you want to use." msgstr "選取已命名的區域，或者輸入包含要使用的篩選條件之儲存格範圍。" #. AN4qk -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:158 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:152 msgctxt "advancedfilterdialog|extended_tip|edfilterarea" msgid "Select the named range, or enter the cell range that contains the filter criteria that you want to use." msgstr "選取已命名的區域，或者輸入包含要使用的篩選條件之儲存格範圍。" #. yALPD -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:175 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:167 msgctxt "advancedfilterdialog|label1" msgid "Read _Filter Criteria From" msgstr "讀取篩選條件自(_F)" #. HBUJA -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:218 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:210 msgctxt "advancedfilterdialog|case" msgid "_Case sensitive" msgstr "區分字母大小寫(_C)" #. VewXr -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:228 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:220 msgctxt "advancedfilterdialog|extended_tip|case" msgid "Distinguishes between uppercase and lowercase letters when filtering the data." msgstr "篩選資料時區分字母大小寫。" #. FHGUG -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:239 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:231 msgctxt "advancedfilterdialog|header" msgid "Range c_ontains column labels" msgstr "範圍含有欄標籤(_O)" #. BzTmz -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:249 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:241 msgctxt "advancedfilterdialog|extended_tip|header" msgid "Includes the column labels in the first row of a cell range." msgstr "在儲存格範圍的第一列中包含欄標籤。" #. WfvCG -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:260 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:252 msgctxt "advancedfilterdialog|regexp" msgid "Regular _expressions" msgstr "常規表述式(_E)" #. DN78o -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:270 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:262 msgctxt "advancedfilterdialog|extended_tip|regexp" msgid "Allows you to use regular expressions in the filter definition." msgstr "允許您在篩選定義中使用萬用字元。" #. tDDfr -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:281 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:273 msgctxt "advancedfilterdialog|unique" msgid "_No duplications" msgstr "無重複(_N)" #. gEg7S -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:291 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:283 msgctxt "advancedfilterdialog|extended_tip|unique" msgid "Excludes duplicate rows in the list of filtered data." msgstr "在篩選出的資料清單中排除重複列。" #. DbA9A -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:302 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:294 msgctxt "advancedfilterdialog|copyresult" msgid "Co_py results to:" msgstr "複製結果到(_P)：" #. tx6QF -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:316 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:308 msgctxt "advancedfilterdialog|extended_tip|copyresult" msgid "Select the check box, and then select the cell range where you want to display the filter results." msgstr "選取此核取方塊，然後選取用於顯示篩選結果的儲存格範圍。" #. 2c6r8 -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:327 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:319 msgctxt "advancedfilterdialog|destpers" msgid "_Keep filter criteria" msgstr "保留篩選條件(_K)" #. KpECC -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:337 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:329 msgctxt "advancedfilterdialog|extended_tip|destpers" msgid "Select the Copy results to check box, and then specify the destination range where you want to display the filtered data. If this box is checked, the destination range remains linked to the source range. You must have defined the source range under Data - Define range as a database range." msgstr "選取 [複製結果到] 核取方塊，然後指定用於顯示篩選出的資料之目標範圍。如果已核取此方塊，目標範圍將與來源範圍保持連結。您必須已在 [資料] - [定義範圍] 下，將來源範圍定義為資料庫範圍。" #. NLz5G -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:369 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:361 msgctxt "advancedfilterdialog|lbcopyarea-atkobject" msgid "Copy results to:" msgstr "複製結果到：" #. CqSuV -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:370 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:362 msgctxt "advancedfilterdialog|extended_tip|lbcopyarea" msgid "Select the check box, and then select the cell range where you want to display the filter results." msgstr "選取此核取方塊，然後選取用於顯示篩選結果的儲存格範圍。" #. TDWTt -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:391 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:383 msgctxt "advancedfilterdialog|edcopyarea-atkobject" msgid "Copy results to:" msgstr "複製結果到：" #. mXpt4 -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:392 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:384 msgctxt "advancedfilterdialog|extended_tip|edcopyarea" msgid "Select the check box, and then select the cell range where you want to display the filter results." msgstr "選取此核取方塊，然後選取用於顯示篩選結果的儲存格範圍。" #. YCsyS -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:411 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:403 msgctxt "advancedfilterdialog|extended_tip|rbcopyarea" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. RGXM4 -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:436 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:428 msgctxt "advancedfilterdialog|dbarealabel" msgid "Data range:" msgstr "資料範圍：" #. 44y9m -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:449 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:441 msgctxt "advancedfilterdialog|dbarea" msgid "dummy" msgstr "樣本" #. wVAjU -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:469 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:461 msgctxt "advancedfilterdialog|label2" msgid "Op_tions" msgstr "選項(_T)" #. he2CY -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:475 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:467 msgctxt "advancedfilterdialog|extended_tip|more" msgid "Shows additional filter options." msgstr "顯示其他篩選器選項。" #. 3CXjk -#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:497 +#: sc/uiconfig/scalc/ui/advancedfilterdialog.ui:489 msgctxt "advancedfilterdialog|extended_tip|AdvancedFilterDialog" msgid "Defines an advanced filter." msgstr "定義最多可組合八個不同篩選條件的篩選。" @@ -18730,85 +18729,85 @@ msgid "Analysis of Variance (ANOVA)" msgstr "變異數分析 (ANOVA)" #. fzdU2 -#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:108 +#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:104 msgctxt "analysisofvariancedialog|input-range-label" msgid "Input range:" msgstr "輸入範圍：" #. hKLBC -#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:122 +#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:118 msgctxt "analysisofvariancedialog|output-range-label" msgid "Results to:" msgstr "結果為：" #. APZAw -#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:190 +#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:184 msgctxt "analysisofvariancedialog|label4" msgid "Data" msgstr "資料" #. xA3Mm -#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:226 +#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:216 msgctxt "analysisofvariancedialog|radio-single-factor" msgid "Single factor" msgstr "單因子" #. JMMJa -#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:242 +#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:232 msgctxt "analysisofvariancedialog|radio-two-factor" msgid "Two factor" msgstr "雙因子" #. MggLT -#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:264 +#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:252 msgctxt "analysisofvariancedialog|label3" msgid "Type" msgstr "類型" #. J6Gea -#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:300 +#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:284 msgctxt "analysisofvariancedialog|groupedby-columns-radio" msgid "Columns" msgstr "欄" #. riGGW -#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:316 +#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:300 msgctxt "analysisofvariancedialog|groupedby-rows-radio" msgid "Rows" msgstr "列" #. jBuzS -#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:339 +#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:321 msgctxt "analysisofvariancedialog|label2" msgid "Grouped by" msgstr "分組依據" #. o4Aw2 -#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:377 +#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:355 msgctxt "analysisofvariancedialog|alpha-label" msgid "Alpha:" msgstr "Alpha：" #. ickoF -#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:392 +#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:370 msgctxt "analysisofvariancedialog|alpha-spin" msgid "0,05" msgstr "0,05" #. UQDCP -#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:406 +#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:384 msgctxt "analysisofvariancedialog|rows-per-sample-label" msgid "Rows per sample:" msgstr "每樣本的列數：" #. wdFYz -#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:437 +#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:413 msgctxt "analysisofvariancedialog|label1" msgid "Parameters" msgstr "參數" #. nG25U -#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:462 +#: sc/uiconfig/scalc/ui/analysisofvariancedialog.ui:438 msgctxt "analysisofvariancedialog|extended_tip|AnalysisOfVarianceDialog" msgid "Produces the analysis of variance (ANOVA) of a given data set" msgstr "" @@ -18832,127 +18831,127 @@ msgid "Saves all changes and closes dialog." msgstr "" #. NTY8D -#: sc/uiconfig/scalc/ui/autoformattable.ui:135 +#: sc/uiconfig/scalc/ui/autoformattable.ui:131 msgctxt "autoformattable|extended_tip|preview" msgid "Displays a preview of the current selection." msgstr "" #. qcCWk -#: sc/uiconfig/scalc/ui/autoformattable.ui:177 +#: sc/uiconfig/scalc/ui/autoformattable.ui:173 msgctxt "autoformattable|extended_tip|formatlb" msgid "Choose a predefined AutoFormat to apply to a selected area in your sheet." msgstr "選擇預先定義的「自動格式」以套用至試算表中的選取區域。" #. NFYeX -#: sc/uiconfig/scalc/ui/autoformattable.ui:210 +#: sc/uiconfig/scalc/ui/autoformattable.ui:206 msgctxt "autoformattable|extended_tip|add" msgid "Allows you to add the current formatting of a range of at least 4 x 4 cells to the list of predefined AutoFormats." msgstr "" #. DYbCK -#: sc/uiconfig/scalc/ui/autoformattable.ui:229 +#: sc/uiconfig/scalc/ui/autoformattable.ui:225 msgctxt "autoformattable|extended_tip|remove" msgid "Deletes the selected element or elements after confirmation." msgstr "刪除選取的元素或已確認要刪除的元素。" #. YNp3m -#: sc/uiconfig/scalc/ui/autoformattable.ui:241 +#: sc/uiconfig/scalc/ui/autoformattable.ui:237 msgctxt "autoformattable|rename" msgid "Rename" msgstr "重新命名" #. zy4WL -#: sc/uiconfig/scalc/ui/autoformattable.ui:247 +#: sc/uiconfig/scalc/ui/autoformattable.ui:243 msgctxt "autoformattable|extended_tip|rename" msgid "Opens a dialog where you can change the name of the selected AutoFormat." msgstr "" #. SEACv -#: sc/uiconfig/scalc/ui/autoformattable.ui:271 +#: sc/uiconfig/scalc/ui/autoformattable.ui:265 msgctxt "autoformattable|label1" msgid "Format" msgstr "格式設定" #. ZVWaV -#: sc/uiconfig/scalc/ui/autoformattable.ui:305 +#: sc/uiconfig/scalc/ui/autoformattable.ui:295 msgctxt "autoformattable|numformatcb" msgid "Number format" msgstr "數字格式" #. KtQDR -#: sc/uiconfig/scalc/ui/autoformattable.ui:314 +#: sc/uiconfig/scalc/ui/autoformattable.ui:304 msgctxt "autoformattable|extended_tip|numformatcb" msgid "When marked, specifies that you want to retain the number format of the selected format." msgstr "標記時，指定您要保留所選格式的數字格式。" #. 6jMct -#: sc/uiconfig/scalc/ui/autoformattable.ui:325 +#: sc/uiconfig/scalc/ui/autoformattable.ui:315 msgctxt "autoformattable|bordercb" msgid "Borders" msgstr "邊框" #. D2WKC -#: sc/uiconfig/scalc/ui/autoformattable.ui:334 +#: sc/uiconfig/scalc/ui/autoformattable.ui:324 msgctxt "autoformattable|extended_tip|bordercb" msgid "When marked, specifies that you want to retain the border of the selected format." msgstr "標記時，指定您要保留所選格式的邊框。" #. FV6mC -#: sc/uiconfig/scalc/ui/autoformattable.ui:345 +#: sc/uiconfig/scalc/ui/autoformattable.ui:335 msgctxt "autoformattable|fontcb" msgid "Font" msgstr "字型" #. GjAFM -#: sc/uiconfig/scalc/ui/autoformattable.ui:354 +#: sc/uiconfig/scalc/ui/autoformattable.ui:344 msgctxt "autoformattable|extended_tip|fontcb" msgid "When marked, specifies that you want to retain the font of the selected format." msgstr "標記時，指定您要保留所選格式的字型。" #. BG3bD -#: sc/uiconfig/scalc/ui/autoformattable.ui:365 +#: sc/uiconfig/scalc/ui/autoformattable.ui:355 msgctxt "autoformattable|patterncb" msgid "Pattern" msgstr "樣式" #. ReXDK -#: sc/uiconfig/scalc/ui/autoformattable.ui:374 +#: sc/uiconfig/scalc/ui/autoformattable.ui:364 msgctxt "autoformattable|extended_tip|patterncb" msgid "When marked, specifies that you want to retain the pattern of the selected format." msgstr "標記時，指定您要保留所選格式的圖案。" #. iSuf5 -#: sc/uiconfig/scalc/ui/autoformattable.ui:385 +#: sc/uiconfig/scalc/ui/autoformattable.ui:375 msgctxt "autoformattable|alignmentcb" msgid "Alignment" msgstr "對齊" #. nKX4E -#: sc/uiconfig/scalc/ui/autoformattable.ui:394 +#: sc/uiconfig/scalc/ui/autoformattable.ui:384 msgctxt "autoformattable|extended_tip|alignmentcb" msgid "When marked, specifies that you want to retain the alignment of the selected format." msgstr "標記時，指定您要保留所選格式的對齊。" #. oSEWM -#: sc/uiconfig/scalc/ui/autoformattable.ui:405 +#: sc/uiconfig/scalc/ui/autoformattable.ui:395 msgctxt "autoformattable|autofitcb" msgid "A_utoFit width and height" msgstr "自動調整寬度與高度(_U)" #. YUhEA -#: sc/uiconfig/scalc/ui/autoformattable.ui:414 +#: sc/uiconfig/scalc/ui/autoformattable.ui:404 msgctxt "autoformattable|extended_tip|autofitcb" msgid "When marked, specifies that you want to retain the width and height of the selected cells of the selected format." msgstr "標記時，指定您要保留所選格式之所選儲存格的寬度和高度。" #. pR75z -#: sc/uiconfig/scalc/ui/autoformattable.ui:431 +#: sc/uiconfig/scalc/ui/autoformattable.ui:419 msgctxt "autoformattable|label2" msgid "Formatting" msgstr "格式設定" #. cBw2F -#: sc/uiconfig/scalc/ui/autoformattable.ui:464 +#: sc/uiconfig/scalc/ui/autoformattable.ui:452 msgctxt "autoformattable|extended_tip|AutoFormatTableDialog" msgid "Use this command to apply an AutoFormat to a selected sheet area or to define your own AutoFormats." msgstr "使用此指令對選取的試算表區域採用自動格式，或定義自己的自動格式。" @@ -18988,43 +18987,43 @@ msgid "Count" msgstr "計數" #. j9TVx -#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:37 +#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:32 msgctxt "cellprotectionpage|checkProtected" msgid "_Protected" msgstr "受保護(_P)" #. jkUCZ -#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:49 +#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:44 msgctxt "cellprotectionpage|extended_tip|checkProtected" msgid "Prevents the selected cells from being modified." msgstr "防止修改所選儲存格。" #. 7WF2B -#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:60 +#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:55 msgctxt "cellprotectionpage|checkHideFormula" msgid "Hide _formula" msgstr "隱藏公式(_F)" #. jCAZ4 -#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:71 +#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:66 msgctxt "cellprotectionpage|extended_tip|checkHideFormula" msgid "Hides formulas in the selected cells." msgstr "隱藏所選儲存格中的公式。" #. arvbZ -#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:82 +#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:77 msgctxt "cellprotectionpage|checkHideAll" msgid "Hide _all" msgstr "全部隱藏(_A)" #. 5v3YW -#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:93 +#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:88 msgctxt "cellprotectionpage|extended_tip|checkHideAll" msgid "Hides formulas and contents of the selected cells." msgstr "隱藏所選儲存格的公式和內容。" #. fBWyS -#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:108 +#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:103 msgctxt "cellprotectionpage|label1" msgid "" "Cell protection is only effective after the current sheet has been protected.\n" @@ -19036,37 +19035,37 @@ msgstr "" "請從「工具」選單中選擇「保護工作表」。" #. bVREg -#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:129 +#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:122 msgctxt "cellprotectionpage|LabelProtection" msgid "Protection" msgstr "保護" #. A5DFp -#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:163 +#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:152 msgctxt "cellprotectionpage|checkHidePrinting" msgid "Hide _when printing" msgstr "列印時隱藏(_W)" #. ZosAc -#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:173 +#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:162 msgctxt "cellprotectionpage|extended_tip|checkHidePrinting" msgid "Keeps the selected cells from being printed." msgstr "防止列印所選儲存格。" #. QqUqE -#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:188 +#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:177 msgctxt "cellprotectionpage|label4" msgid "The cells selected will be omitted when printing." msgstr "目前選取的儲存格列印時會被省略。" #. 8RuyP -#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:206 +#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:193 msgctxt "cellprotectionpage|label3" msgid "Print" msgstr "列印" #. DPWp6 -#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:220 +#: sc/uiconfig/scalc/ui/cellprotectionpage.ui:207 msgctxt "cellprotectionpage|extended_tip|CellProtectionPage" msgid "Defines protection options for selected cells." msgstr "定義所選儲存格的保護選項。" @@ -19078,19 +19077,19 @@ msgid "Change Source Data Range" msgstr "變更來源資料範圍" #. CyQnq -#: sc/uiconfig/scalc/ui/changesourcedialog.ui:99 +#: sc/uiconfig/scalc/ui/changesourcedialog.ui:95 msgctxt "changesourcedialog|col" msgid "First _column as label" msgstr "第一欄作為標籤(_C)" #. hP7cu -#: sc/uiconfig/scalc/ui/changesourcedialog.ui:114 +#: sc/uiconfig/scalc/ui/changesourcedialog.ui:110 msgctxt "changesourcedialog|row" msgid "First _row as label" msgstr "第一列作為標籤(_R)" #. kCVCr -#: sc/uiconfig/scalc/ui/changesourcedialog.ui:135 +#: sc/uiconfig/scalc/ui/changesourcedialog.ui:129 msgctxt "changesourcedialog|label1" msgid "Labels" msgstr "標籤" @@ -19150,43 +19149,43 @@ msgid "Chi Square Test" msgstr "卡方檢定" #. VHxUD -#: sc/uiconfig/scalc/ui/chisquaretestdialog.ui:101 +#: sc/uiconfig/scalc/ui/chisquaretestdialog.ui:97 msgctxt "chisquaretestdialog|input-range-label" msgid "Input range:" msgstr "輸入範圍：" #. TFGB7 -#: sc/uiconfig/scalc/ui/chisquaretestdialog.ui:140 +#: sc/uiconfig/scalc/ui/chisquaretestdialog.ui:136 msgctxt "chisquaretestdialog|output-range-label" msgid "Results to:" msgstr "結果為：" #. frEZB -#: sc/uiconfig/scalc/ui/chisquaretestdialog.ui:183 +#: sc/uiconfig/scalc/ui/chisquaretestdialog.ui:177 msgctxt "chisquaretestdialog|label1" msgid "Data" msgstr "資料" #. BJDYD -#: sc/uiconfig/scalc/ui/chisquaretestdialog.ui:219 +#: sc/uiconfig/scalc/ui/chisquaretestdialog.ui:209 msgctxt "chisquaretestdialog|groupedby-columns-radio" msgid "_Columns" msgstr "欄(_C)" #. y75Gj -#: sc/uiconfig/scalc/ui/chisquaretestdialog.ui:235 +#: sc/uiconfig/scalc/ui/chisquaretestdialog.ui:225 msgctxt "chisquaretestdialog|groupedby-rows-radio" msgid "_Rows" msgstr "列(_R)" #. 2Cttx -#: sc/uiconfig/scalc/ui/chisquaretestdialog.ui:257 +#: sc/uiconfig/scalc/ui/chisquaretestdialog.ui:245 msgctxt "chisquaretestdialog|label2" msgid "Grouped by" msgstr "分組依據" #. tAdCX -#: sc/uiconfig/scalc/ui/chisquaretestdialog.ui:282 +#: sc/uiconfig/scalc/ui/chisquaretestdialog.ui:270 msgctxt "chisquaretestdialog|extended_tip|ChiSquareTestDialog" msgid "Calculates the Chi-square test of a data sample." msgstr "" @@ -19198,37 +19197,37 @@ msgid "Copy List" msgstr "複製清單" #. P7PZo -#: sc/uiconfig/scalc/ui/colorrowdialog.ui:97 +#: sc/uiconfig/scalc/ui/colorrowdialog.ui:93 msgctxt "colorrowdialog|columns" msgid "_Columns" msgstr "欄(_C)" #. orYEB -#: sc/uiconfig/scalc/ui/colorrowdialog.ui:107 +#: sc/uiconfig/scalc/ui/colorrowdialog.ui:103 msgctxt "extended_tip|columns" msgid "Select the Columns option to summarize the contents of the selected columns in a list." msgstr "選取 [欄] 選項，將所選欄的內容匯總成一個清單。" #. 8qbkD -#: sc/uiconfig/scalc/ui/colorrowdialog.ui:119 +#: sc/uiconfig/scalc/ui/colorrowdialog.ui:115 msgctxt "colorrowdialog|rows" msgid "_Rows" msgstr "列(_R)" #. CCfoS -#: sc/uiconfig/scalc/ui/colorrowdialog.ui:129 +#: sc/uiconfig/scalc/ui/colorrowdialog.ui:125 msgctxt "extended_tip|rows" msgid "Select the Rows option to summarize the contents of the selected rows in a list." msgstr "選取 [列] 選項，將所選列的內容匯總成一個清單。" #. UiR8k -#: sc/uiconfig/scalc/ui/colorrowdialog.ui:147 +#: sc/uiconfig/scalc/ui/colorrowdialog.ui:141 msgctxt "colorrowdialog|label" msgid "List From" msgstr "清單取自" #. BSSuE -#: sc/uiconfig/scalc/ui/colorrowdialog.ui:172 +#: sc/uiconfig/scalc/ui/colorrowdialog.ui:166 msgctxt "extended_tip|ColOrRowDialog" msgid "Allows you to copy marked cells to a sort list." msgstr "允許您將標記的儲存格複製到排序清單中。" @@ -19276,67 +19275,67 @@ msgid "Manage Conditional Formatting" msgstr "管理條件式格式設定" #. FZLBr -#: sc/uiconfig/scalc/ui/condformatmanager.ui:133 +#: sc/uiconfig/scalc/ui/condformatmanager.ui:129 msgctxt "condformatmanager|STR_HEADER_RANGE" msgid "Range" msgstr "範圍" #. Gipiw -#: sc/uiconfig/scalc/ui/condformatmanager.ui:146 +#: sc/uiconfig/scalc/ui/condformatmanager.ui:142 msgctxt "condformatmanager|STR_HEADER_FIRST_CONDITION" msgid "First Condition" msgstr "第一個條件" #. Cshpe -#: sc/uiconfig/scalc/ui/condformatmanager.ui:157 +#: sc/uiconfig/scalc/ui/condformatmanager.ui:153 msgctxt "condformatmanager|extended_tip|CONTAINER" msgid "The Conditional Formats list displays the active conditional formatting rules set in the current spreadsheet." msgstr "" #. rCgD4 -#: sc/uiconfig/scalc/ui/condformatmanager.ui:177 +#: sc/uiconfig/scalc/ui/condformatmanager.ui:173 msgctxt "condformatmanager|add" msgid "Add" msgstr "加入" #. BTut7 -#: sc/uiconfig/scalc/ui/condformatmanager.ui:183 +#: sc/uiconfig/scalc/ui/condformatmanager.ui:179 msgctxt "condformatmanager|extended_tip|add" msgid "Here you can add, edit or remove one or several conditional formattings." msgstr "" #. 8XXd8 -#: sc/uiconfig/scalc/ui/condformatmanager.ui:195 +#: sc/uiconfig/scalc/ui/condformatmanager.ui:191 msgctxt "condformatmanager|edit" msgid "Edit..." msgstr "編輯..." #. H6qbm -#: sc/uiconfig/scalc/ui/condformatmanager.ui:201 +#: sc/uiconfig/scalc/ui/condformatmanager.ui:197 msgctxt "condformatmanager|extended_tip|edit" msgid "Here you can add, edit or remove one or several conditional formattings." msgstr "" #. oLc2f -#: sc/uiconfig/scalc/ui/condformatmanager.ui:213 +#: sc/uiconfig/scalc/ui/condformatmanager.ui:209 msgctxt "condformatmanager|remove" msgid "Remove" msgstr "移除" #. gEA5H -#: sc/uiconfig/scalc/ui/condformatmanager.ui:219 +#: sc/uiconfig/scalc/ui/condformatmanager.ui:215 msgctxt "condformatmanager|extended_tip|remove" msgid "Here you can add, edit or remove one or several conditional formattings." msgstr "" #. dV9US -#: sc/uiconfig/scalc/ui/condformatmanager.ui:244 +#: sc/uiconfig/scalc/ui/condformatmanager.ui:238 msgctxt "condformatmanager|label1" msgid "Conditional Formats" msgstr "條件式格式" #. yDqGa -#: sc/uiconfig/scalc/ui/condformatmanager.ui:269 +#: sc/uiconfig/scalc/ui/condformatmanager.ui:263 msgctxt "condformatmanager|extended_tip|CondFormatManager" msgid "This dialog allows you to see all the conditional formatting defined in the spreadsheet." msgstr "" @@ -19930,61 +19929,73 @@ msgid "Closes dialog and discards all changes." msgstr "" #. VP7Xe -#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:162 +#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:156 msgctxt "conditionalformatdialog|extended_tip|list" msgid "List of the conditions defined for the cell range in order of evaluation." msgstr "" #. oEPbA -#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:191 +#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:185 msgctxt "conditionalformatdialog|extended_tip|add" msgid "Here you can add, edit or remove one or several conditional formattings." msgstr "" #. ejKTF -#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:210 +#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:204 msgctxt "conditionalformatdialog|extended_tip|delete" msgid "Deletes the selected element or elements without requiring confirmation." msgstr "刪除一或多個選取的元素時不需要確認。" +#. upqJA +#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:216 +msgctxt "conditionalformatdialog|up" +msgid "_Up" +msgstr "" + #. fGKvB -#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:229 +#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:223 msgctxt "conditionalformatdialog|extended_tip|up" msgid "Increase priority of the selected condition." msgstr "" +#. yaQBX +#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:235 +msgctxt "conditionalformatdialog|down" +msgid "Do_wn" +msgstr "" + #. ykMES -#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:248 +#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:242 msgctxt "conditionalformatdialog|extended_tip|down" msgid "Decrease priority of the selected condition." msgstr "" #. Q6Ag7 -#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:273 +#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:265 msgctxt "conditionalformatdialog|label1" msgid "Conditions" msgstr "條件" #. rgGuH -#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:310 +#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:298 msgctxt "conditionalformatdialog|ftassign" msgid "Range:" msgstr "範圍：" #. hZBzt -#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:342 +#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:330 msgctxt "conditionalformatdialog|extended_tip|rbassign" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. BH5wk -#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:360 +#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:346 msgctxt "conditionalformatdialog|label2" msgid "Cell Range" msgstr "儲存格範圍" #. JymF6 -#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:385 +#: sc/uiconfig/scalc/ui/conditionalformatdialog.ui:371 msgctxt "conditionalformatdialog|extended_tip|ConditionalFormatDialog" msgid "Choose Conditional Formatting to define format styles depending on certain conditions." msgstr "" @@ -20248,67 +20259,67 @@ msgid "Copy results _to:" msgstr "複製結果到(_T)：" #. Zhibj -#: sc/uiconfig/scalc/ui/consolidatedialog.ui:486 +#: sc/uiconfig/scalc/ui/consolidatedialog.ui:480 msgctxt "consolidatedialog|byrow" msgid "_Row labels" msgstr "列標籤(_R)" #. mfhWz -#: sc/uiconfig/scalc/ui/consolidatedialog.ui:496 +#: sc/uiconfig/scalc/ui/consolidatedialog.ui:490 msgctxt "consolidatedialog|extended_tip|byrow" msgid "Uses the row labels to arrange the consolidated data." msgstr "使用列貼標來排序已合併計算的資料。" #. SCoPe -#: sc/uiconfig/scalc/ui/consolidatedialog.ui:507 +#: sc/uiconfig/scalc/ui/consolidatedialog.ui:501 msgctxt "consolidatedialog|bycol" msgid "C_olumn labels" msgstr "欄標籤(_O)" #. AD5mx -#: sc/uiconfig/scalc/ui/consolidatedialog.ui:517 +#: sc/uiconfig/scalc/ui/consolidatedialog.ui:511 msgctxt "consolidatedialog|extended_tip|bycol" msgid "Uses the column labels to arrange the consolidated data." msgstr "使用欄貼標來排序已合併計算的資料。" #. 3dLXN -#: sc/uiconfig/scalc/ui/consolidatedialog.ui:534 +#: sc/uiconfig/scalc/ui/consolidatedialog.ui:526 msgctxt "consolidatedialog|label3" msgid "Consolidate by" msgstr "合併計算按照" #. VKSm9 -#: sc/uiconfig/scalc/ui/consolidatedialog.ui:566 +#: sc/uiconfig/scalc/ui/consolidatedialog.ui:549 msgctxt "consolidatedialog|refs" msgid "_Link to source data" msgstr "連結到來源資料(_L)" #. AFQD3 -#: sc/uiconfig/scalc/ui/consolidatedialog.ui:576 +#: sc/uiconfig/scalc/ui/consolidatedialog.ui:564 msgctxt "consolidatedialog|extended_tip|refs" msgid "Links the data in the consolidation range to the source data, and automatically updates the results of the consolidation when the source data is changed." msgstr "將合併計算範圍中的資料連結至來源資料，且當來源資料變更時自動更新合併計算的結果。" #. tTmj2 -#: sc/uiconfig/scalc/ui/consolidatedialog.ui:587 +#: sc/uiconfig/scalc/ui/consolidatedialog.ui:573 msgctxt "consolidatedialog|label4" msgid "Options" msgstr "選項" #. QBCQr -#: sc/uiconfig/scalc/ui/consolidatedialog.ui:606 +#: sc/uiconfig/scalc/ui/consolidatedialog.ui:592 msgctxt "consolidatedialog|more_label" msgid "Options" msgstr "選項" #. TMPtN -#: sc/uiconfig/scalc/ui/consolidatedialog.ui:611 +#: sc/uiconfig/scalc/ui/consolidatedialog.ui:597 msgctxt "consolidatedialog|extended_tip|more" msgid "Shows additional options." msgstr "顯示其他選項." #. HEHFf -#: sc/uiconfig/scalc/ui/consolidatedialog.ui:633 +#: sc/uiconfig/scalc/ui/consolidatedialog.ui:619 msgctxt "consolidatedialog|extended_tip|ConsolidateDialog" msgid "Combines data from one or more independent cell ranges and calculates a new range using the function that you specify." msgstr "合併一個或多個獨立儲存格範圍中的資料，並使用指定的函式計算新的範圍。" @@ -20320,43 +20331,43 @@ msgid "Correlation" msgstr "相關" #. XwREB -#: sc/uiconfig/scalc/ui/correlationdialog.ui:100 +#: sc/uiconfig/scalc/ui/correlationdialog.ui:96 msgctxt "correlationdialog|input-range-label" msgid "Input range:" msgstr "輸入範圍：" #. ZWgXM -#: sc/uiconfig/scalc/ui/correlationdialog.ui:114 +#: sc/uiconfig/scalc/ui/correlationdialog.ui:110 msgctxt "correlationdialog|output-range-label" msgid "Results to:" msgstr "結果為：" #. jJst7 -#: sc/uiconfig/scalc/ui/correlationdialog.ui:182 +#: sc/uiconfig/scalc/ui/correlationdialog.ui:176 msgctxt "correlationdialog|label4" msgid "Data" msgstr "資料" #. wpJTi -#: sc/uiconfig/scalc/ui/correlationdialog.ui:218 +#: sc/uiconfig/scalc/ui/correlationdialog.ui:208 msgctxt "correlationdialog|groupedby-columns-radio" msgid "Columns" msgstr "欄" #. K6GDA -#: sc/uiconfig/scalc/ui/correlationdialog.ui:234 +#: sc/uiconfig/scalc/ui/correlationdialog.ui:224 msgctxt "correlationdialog|groupedby-rows-radio" msgid "Rows" msgstr "列" #. BP2jQ -#: sc/uiconfig/scalc/ui/correlationdialog.ui:256 +#: sc/uiconfig/scalc/ui/correlationdialog.ui:244 msgctxt "correlationdialog|label2" msgid "Grouped by" msgstr "分組依據" #. eC2za -#: sc/uiconfig/scalc/ui/correlationdialog.ui:281 +#: sc/uiconfig/scalc/ui/correlationdialog.ui:269 msgctxt "correlationdialog|extended_tip|CorrelationDialog" msgid "Calculates the correlation of two sets of numeric data." msgstr "" @@ -20368,43 +20379,43 @@ msgid "Covariance" msgstr "共變異數" #. gEuSQ -#: sc/uiconfig/scalc/ui/covariancedialog.ui:100 +#: sc/uiconfig/scalc/ui/covariancedialog.ui:96 msgctxt "covariancedialog|input-range-label" msgid "Input range:" msgstr "輸入範圍：" #. eEB9E -#: sc/uiconfig/scalc/ui/covariancedialog.ui:139 +#: sc/uiconfig/scalc/ui/covariancedialog.ui:135 msgctxt "covariancedialog|output-range-label" msgid "Results to:" msgstr "結果為：" #. nry3Q -#: sc/uiconfig/scalc/ui/covariancedialog.ui:182 +#: sc/uiconfig/scalc/ui/covariancedialog.ui:176 msgctxt "covariancedialog|label1" msgid "Data" msgstr "資料" #. GhcBB -#: sc/uiconfig/scalc/ui/covariancedialog.ui:218 +#: sc/uiconfig/scalc/ui/covariancedialog.ui:208 msgctxt "covariancedialog|groupedby-columns-radio" msgid "Columns" msgstr "欄" #. 7YbpZ -#: sc/uiconfig/scalc/ui/covariancedialog.ui:234 +#: sc/uiconfig/scalc/ui/covariancedialog.ui:224 msgctxt "covariancedialog|groupedby-rows-radio" msgid "Rows" msgstr "列" #. FgzdQ -#: sc/uiconfig/scalc/ui/covariancedialog.ui:256 +#: sc/uiconfig/scalc/ui/covariancedialog.ui:244 msgctxt "covariancedialog|label2" msgid "Grouped by" msgstr "分組依據" #. XfrBg -#: sc/uiconfig/scalc/ui/covariancedialog.ui:281 +#: sc/uiconfig/scalc/ui/covariancedialog.ui:269 msgctxt "covariancedialog|extended_tip|CovarianceDialog" msgid "Calculates the covariance of two sets of numeric data." msgstr "" @@ -20416,61 +20427,61 @@ msgid "Create Names" msgstr "產生名稱" #. bWFYd -#: sc/uiconfig/scalc/ui/createnamesdialog.ui:99 +#: sc/uiconfig/scalc/ui/createnamesdialog.ui:95 msgctxt "createnamesdialog|top" msgid "_Top row" msgstr "上方列(_T)" #. 8QHEC -#: sc/uiconfig/scalc/ui/createnamesdialog.ui:108 +#: sc/uiconfig/scalc/ui/createnamesdialog.ui:104 msgctxt "createnamesdialog|extended_tip|top" msgid "Creates the range names from the header row of the selected range." msgstr "在選取區域的標題列建立區域名稱。" #. hJ9LB -#: sc/uiconfig/scalc/ui/createnamesdialog.ui:120 +#: sc/uiconfig/scalc/ui/createnamesdialog.ui:116 msgctxt "createnamesdialog|left" msgid "_Left column" msgstr "左欄(_L)" #. C6Cjs -#: sc/uiconfig/scalc/ui/createnamesdialog.ui:129 +#: sc/uiconfig/scalc/ui/createnamesdialog.ui:125 msgctxt "createnamesdialog|extended_tip|left" msgid "Creates the range names from the entries in the first column of the selected sheet range." msgstr "在選取試算表區域的第一欄的項目中建立區域名稱。" #. T2unv -#: sc/uiconfig/scalc/ui/createnamesdialog.ui:141 +#: sc/uiconfig/scalc/ui/createnamesdialog.ui:137 msgctxt "createnamesdialog|bottom" msgid "_Bottom row" msgstr "下方列(_B)" #. t6Zop -#: sc/uiconfig/scalc/ui/createnamesdialog.ui:152 +#: sc/uiconfig/scalc/ui/createnamesdialog.ui:148 msgctxt "createnamesdialog|extended_tip|bottom" msgid "Creates the range names from the entries in the last row of the selected sheet range." msgstr "在選取試算表區域的最後一列的項目中建立區域名稱。" #. AVsK3 -#: sc/uiconfig/scalc/ui/createnamesdialog.ui:164 +#: sc/uiconfig/scalc/ui/createnamesdialog.ui:160 msgctxt "createnamesdialog|right" msgid "_Right column" msgstr "右欄(_R)" #. VAW7M -#: sc/uiconfig/scalc/ui/createnamesdialog.ui:173 +#: sc/uiconfig/scalc/ui/createnamesdialog.ui:169 msgctxt "createnamesdialog|extended_tip|right" msgid "Creates the range names from the entries in the last column of the selected sheet range." msgstr "在選取試算表區域的最後一欄的項目中建立區域名稱。" #. EDUAr -#: sc/uiconfig/scalc/ui/createnamesdialog.ui:191 +#: sc/uiconfig/scalc/ui/createnamesdialog.ui:185 msgctxt "createnamesdialog|label1" msgid "Create Names From" msgstr "產生名稱從" #. zZfTJ -#: sc/uiconfig/scalc/ui/createnamesdialog.ui:217 +#: sc/uiconfig/scalc/ui/createnamesdialog.ui:211 msgctxt "createnamesdialog|extended_tip|CreateNamesDialog" msgid "Allows you to automatically name multiple cell ranges." msgstr "允許您自動命名多個儲存格範圍。" @@ -20482,37 +20493,37 @@ msgid "External Source" msgstr "外部來源" #. DYFEW -#: sc/uiconfig/scalc/ui/dapiservicedialog.ui:110 +#: sc/uiconfig/scalc/ui/dapiservicedialog.ui:104 msgctxt "dapiservicedialog|label2" msgid "_Service" msgstr "服務(_S)" #. sBB3n -#: sc/uiconfig/scalc/ui/dapiservicedialog.ui:124 +#: sc/uiconfig/scalc/ui/dapiservicedialog.ui:118 msgctxt "dapiservicedialog|label3" msgid "So_urce" msgstr "來源(_U)" #. phRhR -#: sc/uiconfig/scalc/ui/dapiservicedialog.ui:138 +#: sc/uiconfig/scalc/ui/dapiservicedialog.ui:132 msgctxt "dapiservicedialog|label4" msgid "_Name" msgstr "名稱(_N)" #. cRSBE -#: sc/uiconfig/scalc/ui/dapiservicedialog.ui:152 +#: sc/uiconfig/scalc/ui/dapiservicedialog.ui:146 msgctxt "dapiservicedialog|label5" msgid "Us_er" msgstr "使用者(_E)" #. B8mzb -#: sc/uiconfig/scalc/ui/dapiservicedialog.ui:166 +#: sc/uiconfig/scalc/ui/dapiservicedialog.ui:160 msgctxt "dapiservicedialog|label6" msgid "_Password" msgstr "密碼(_P)" #. xhe7G -#: sc/uiconfig/scalc/ui/dapiservicedialog.ui:242 +#: sc/uiconfig/scalc/ui/dapiservicedialog.ui:234 msgctxt "dapiservicedialog|label1" msgid "Selection" msgstr "選取內容" @@ -20524,205 +20535,277 @@ msgid "Data Bar" msgstr "資料條" #. GeymG -#: sc/uiconfig/scalc/ui/databaroptions.ui:95 +#: sc/uiconfig/scalc/ui/databaroptions.ui:106 msgctxt "databaroptions|label4" msgid "Minimum:" msgstr "最小：" #. bRDM7 -#: sc/uiconfig/scalc/ui/databaroptions.ui:109 +#: sc/uiconfig/scalc/ui/databaroptions.ui:120 msgctxt "databaroptions|label5" msgid "Maximum:" msgstr "最大：" #. 6B7HL -#: sc/uiconfig/scalc/ui/databaroptions.ui:124 +#: sc/uiconfig/scalc/ui/databaroptions.ui:135 msgctxt "databaroptions|min" msgid "Automatic" msgstr "自動" #. 4XucS -#: sc/uiconfig/scalc/ui/databaroptions.ui:125 +#: sc/uiconfig/scalc/ui/databaroptions.ui:136 msgctxt "databaroptions|min" msgid "Minimum" msgstr "最小" #. DWXpV -#: sc/uiconfig/scalc/ui/databaroptions.ui:126 +#: sc/uiconfig/scalc/ui/databaroptions.ui:137 msgctxt "databaroptions|min" msgid "Maximum" msgstr "最大" #. xL32D -#: sc/uiconfig/scalc/ui/databaroptions.ui:127 +#: sc/uiconfig/scalc/ui/databaroptions.ui:138 msgctxt "databaroptions|min" msgid "Percentile" msgstr "百分位數" #. 2G2fr -#: sc/uiconfig/scalc/ui/databaroptions.ui:128 +#: sc/uiconfig/scalc/ui/databaroptions.ui:139 msgctxt "databaroptions|min" msgid "Value" msgstr "值" #. DAkSr -#: sc/uiconfig/scalc/ui/databaroptions.ui:129 +#: sc/uiconfig/scalc/ui/databaroptions.ui:140 msgctxt "databaroptions|min" msgid "Percent" msgstr "百分比" #. Ckh2x -#: sc/uiconfig/scalc/ui/databaroptions.ui:130 +#: sc/uiconfig/scalc/ui/databaroptions.ui:141 msgctxt "databaroptions|min" msgid "Formula" msgstr "公式" +#. 7b5oQ +#: sc/uiconfig/scalc/ui/databaroptions.ui:145 +msgctxt "databaroptions|extended_tip|min" +msgid "Select the way the minimum is set" +msgstr "" + #. DiBWL -#: sc/uiconfig/scalc/ui/databaroptions.ui:144 +#: sc/uiconfig/scalc/ui/databaroptions.ui:160 msgctxt "databaroptions|max" msgid "Automatic" msgstr "自動" #. DADbe -#: sc/uiconfig/scalc/ui/databaroptions.ui:145 +#: sc/uiconfig/scalc/ui/databaroptions.ui:161 msgctxt "databaroptions|max" msgid "Minimum" msgstr "最小" #. 49Coh -#: sc/uiconfig/scalc/ui/databaroptions.ui:146 +#: sc/uiconfig/scalc/ui/databaroptions.ui:162 msgctxt "databaroptions|max" msgid "Maximum" msgstr "最大" #. hqd9B -#: sc/uiconfig/scalc/ui/databaroptions.ui:147 +#: sc/uiconfig/scalc/ui/databaroptions.ui:163 msgctxt "databaroptions|max" msgid "Percentile" msgstr "百分位數" #. zRLqG -#: sc/uiconfig/scalc/ui/databaroptions.ui:148 +#: sc/uiconfig/scalc/ui/databaroptions.ui:164 msgctxt "databaroptions|max" msgid "Value" msgstr "值" #. Nv6Vn -#: sc/uiconfig/scalc/ui/databaroptions.ui:149 +#: sc/uiconfig/scalc/ui/databaroptions.ui:165 msgctxt "databaroptions|max" msgid "Percent" msgstr "百分比" #. 5QJ3k -#: sc/uiconfig/scalc/ui/databaroptions.ui:150 +#: sc/uiconfig/scalc/ui/databaroptions.ui:166 msgctxt "databaroptions|max" msgid "Formula" msgstr "公式" +#. L6nxo +#: sc/uiconfig/scalc/ui/databaroptions.ui:170 +msgctxt "databaroptions|extended_tip|max" +msgid "Selct the way the maximum is set" +msgstr "" + +#. 5P3sd +#: sc/uiconfig/scalc/ui/databaroptions.ui:186 +msgctxt "datbaroptions|extended_tip|min_value" +msgid "Enter the value for the minimum" +msgstr "" + +#. oKw6w +#: sc/uiconfig/scalc/ui/databaroptions.ui:202 +msgctxt "datbaroptions|extended_tip|max_value" +msgid "Enter the value for the maximum" +msgstr "" + #. TKfBV -#: sc/uiconfig/scalc/ui/databaroptions.ui:188 +#: sc/uiconfig/scalc/ui/databaroptions.ui:217 msgctxt "databaroptions|label1" msgid "Entry Values" msgstr "條目值" #. PXQgk -#: sc/uiconfig/scalc/ui/databaroptions.ui:227 +#: sc/uiconfig/scalc/ui/databaroptions.ui:252 msgctxt "databaroptions|label6" msgid "Positive:" msgstr "正：" #. YWrEs -#: sc/uiconfig/scalc/ui/databaroptions.ui:241 +#: sc/uiconfig/scalc/ui/databaroptions.ui:266 msgctxt "databaroptions|label7" msgid "Negative:" msgstr "負：" +#. E95Qc +#: sc/uiconfig/scalc/ui/databaroptions.ui:285 +msgctxt "databaroptions|extended_tip|positive_colour" +msgid "Select the color for the positive values" +msgstr "" + +#. fHCLy +#: sc/uiconfig/scalc/ui/databaroptions.ui:304 +msgctxt "datbaroptions|extended_tip|negative_colour" +msgid "Select the color for the negative values" +msgstr "" + #. zbBGo -#: sc/uiconfig/scalc/ui/databaroptions.ui:283 +#: sc/uiconfig/scalc/ui/databaroptions.ui:318 msgctxt "databaroptions|label10" msgid "Fill:" msgstr "填入：" #. NArFG -#: sc/uiconfig/scalc/ui/databaroptions.ui:297 +#: sc/uiconfig/scalc/ui/databaroptions.ui:332 msgctxt "databaroptions|fill_type" msgid "Color" msgstr "色彩" #. XjywU -#: sc/uiconfig/scalc/ui/databaroptions.ui:298 +#: sc/uiconfig/scalc/ui/databaroptions.ui:333 msgctxt "databaroptions|fill_type" msgid "Gradient" msgstr "漸層" +#. HCRXq +#: sc/uiconfig/scalc/ui/databaroptions.ui:337 +msgctxt "databaroptions|extended_tip|fill_type" +msgid "Select if the fill in color is solid or gradient." +msgstr "" + #. cA4CB -#: sc/uiconfig/scalc/ui/databaroptions.ui:314 +#: sc/uiconfig/scalc/ui/databaroptions.ui:352 msgctxt "databaroptions|label2" msgid "Bar Colors" msgstr "條的色彩" #. iABiC -#: sc/uiconfig/scalc/ui/databaroptions.ui:353 +#: sc/uiconfig/scalc/ui/databaroptions.ui:387 msgctxt "databaroptions|label8" msgid "Position of vertical axis:" msgstr "縱軸的位置：" #. 4oGae -#: sc/uiconfig/scalc/ui/databaroptions.ui:367 +#: sc/uiconfig/scalc/ui/databaroptions.ui:401 msgctxt "databaroptions|label9" msgid "Color of vertical axis:" msgstr "縱軸的色彩：" #. 5j8jz -#: sc/uiconfig/scalc/ui/databaroptions.ui:382 +#: sc/uiconfig/scalc/ui/databaroptions.ui:416 msgctxt "databaroptions|axis_pos" msgid "Automatic" msgstr "自動" #. Exmsc -#: sc/uiconfig/scalc/ui/databaroptions.ui:383 +#: sc/uiconfig/scalc/ui/databaroptions.ui:417 msgctxt "databaroptions|axis_pos" msgid "Middle" msgstr "中" #. AXEj2 -#: sc/uiconfig/scalc/ui/databaroptions.ui:384 +#: sc/uiconfig/scalc/ui/databaroptions.ui:418 msgctxt "databaroptions|axis_pos" msgid "None" msgstr "無" +#. f95PC +#: sc/uiconfig/scalc/ui/databaroptions.ui:422 +msgctxt "databaroptions|extended_tip|axis_pos" +msgid "Select the positions of vertical axis in the cell to start fill." +msgstr "" + +#. eBCGQ +#: sc/uiconfig/scalc/ui/databaroptions.ui:441 +msgctxt "datbaroptions|extended_tip|axis_colour" +msgid "Set the color of the vertical axis" +msgstr "" + #. DjBHB -#: sc/uiconfig/scalc/ui/databaroptions.ui:414 +#: sc/uiconfig/scalc/ui/databaroptions.ui:456 msgctxt "databaroptions|label3" msgid "Axis" msgstr "軸" #. cNRuJ -#: sc/uiconfig/scalc/ui/databaroptions.ui:453 +#: sc/uiconfig/scalc/ui/databaroptions.ui:491 msgctxt "databaroptions|label12" msgid "Minimum bar length (%):" msgstr "最短條長 (%)：" #. FJXys -#: sc/uiconfig/scalc/ui/databaroptions.ui:467 +#: sc/uiconfig/scalc/ui/databaroptions.ui:505 msgctxt "databaroptions|label13" msgid "Maximum bar length (%):" msgstr "最長條長 (%)：" +#. KFjEB +#: sc/uiconfig/scalc/ui/databaroptions.ui:521 +msgctxt "databaroptions|extended_tip|min_length" +msgid "Set the minimum bar length in percentage with respect to the cell" +msgstr "" + +#. hGFk3 +#: sc/uiconfig/scalc/ui/databaroptions.ui:537 +msgctxt "databaroptions|extended_tip|max_length" +msgid "Set the maximum bar length in percentage with respect to the cell" +msgstr "" + #. 9fekJ -#: sc/uiconfig/scalc/ui/databaroptions.ui:506 +#: sc/uiconfig/scalc/ui/databaroptions.ui:552 msgctxt "databaroptions|label11" msgid "Bar Lengths" msgstr "條長" #. PySqs -#: sc/uiconfig/scalc/ui/databaroptions.ui:521 +#: sc/uiconfig/scalc/ui/databaroptions.ui:567 msgctxt "databaroptions|only_bar" msgid "Display bar only" msgstr "僅顯示條" +#. JqJwv +#: sc/uiconfig/scalc/ui/databaroptions.ui:576 +msgctxt "datbaroptions|extended_tip|only_bar" +msgid "Select to have only the bar visible and have value invisible" +msgstr "" + #. 2VgJW -#: sc/uiconfig/scalc/ui/databaroptions.ui:538 +#: sc/uiconfig/scalc/ui/databaroptions.ui:589 msgctxt "databaroptions|str_same_value" msgid "The minimum value must be less than the maximum value." msgstr "最短值必須小於最長值。" @@ -20734,145 +20817,145 @@ msgid "Data Field" msgstr "資料欄位" #. ANVo4 -#: sc/uiconfig/scalc/ui/datafielddialog.ui:152 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:145 msgctxt "datafielddialog|extended_tip|functions" msgid "Click the type of subtotal that you want to calculate. This option is only available if the User-defined option is selected." msgstr "" #. oY6n8 -#: sc/uiconfig/scalc/ui/datafielddialog.ui:171 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:162 msgctxt "datafielddialog|label1" msgid "Function" msgstr "函式" #. kcFDu -#: sc/uiconfig/scalc/ui/datafielddialog.ui:185 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:176 msgctxt "datafielddialog|checkbutton1" msgid "Show it_ems without data" msgstr "顯示不含資料的項目(_E)" #. 4S4kV -#: sc/uiconfig/scalc/ui/datafielddialog.ui:194 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:185 msgctxt "datafielddialog|extended_tip|checkbutton1" msgid "Includes empty columns and rows in the results table." msgstr "" #. CNVLs -#: sc/uiconfig/scalc/ui/datafielddialog.ui:213 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:204 msgctxt "datafielddialog|label2" msgid "Name:" msgstr "名稱：" #. yphGB -#: sc/uiconfig/scalc/ui/datafielddialog.ui:262 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:248 msgctxt "datafielddialog|label4" msgid "_Type:" msgstr "類型(_T)：" #. h82Rf -#: sc/uiconfig/scalc/ui/datafielddialog.ui:277 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:263 msgctxt "datafielddialog|basefieldft" msgid "_Base field:" msgstr "基礎欄位(_B)：" #. bJVVt -#: sc/uiconfig/scalc/ui/datafielddialog.ui:292 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:278 msgctxt "datafielddialog|baseitemft" msgid "Ba_se item:" msgstr "基礎項目(_S)：" #. b9eEa -#: sc/uiconfig/scalc/ui/datafielddialog.ui:308 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:294 msgctxt "datafielddialog|type" msgid "Normal" msgstr "標準" #. bDNvP -#: sc/uiconfig/scalc/ui/datafielddialog.ui:309 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:295 msgctxt "datafielddialog|type" msgid "Difference from" msgstr "差異比較對象" #. 5vvHV -#: sc/uiconfig/scalc/ui/datafielddialog.ui:310 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:296 msgctxt "datafielddialog|type" msgid "% of" msgstr "百分比" #. naD5D -#: sc/uiconfig/scalc/ui/datafielddialog.ui:311 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:297 msgctxt "datafielddialog|type" msgid "% difference from" msgstr "差異百分比" #. ttE3t -#: sc/uiconfig/scalc/ui/datafielddialog.ui:312 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:298 msgctxt "datafielddialog|type" msgid "Running total in" msgstr "執行總計於" #. Eg4UJ -#: sc/uiconfig/scalc/ui/datafielddialog.ui:313 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:299 msgctxt "datafielddialog|type" msgid "% of row" msgstr "總列數百分比" #. dB8Rn -#: sc/uiconfig/scalc/ui/datafielddialog.ui:314 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:300 msgctxt "datafielddialog|type" msgid "% of column" msgstr "總欄數百分比" #. kN2Bf -#: sc/uiconfig/scalc/ui/datafielddialog.ui:315 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:301 msgctxt "datafielddialog|type" msgid "% of total" msgstr "總數百分比" #. fYyCw -#: sc/uiconfig/scalc/ui/datafielddialog.ui:316 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:302 msgctxt "datafielddialog|type" msgid "Index" msgstr "索引" #. DDPRx -#: sc/uiconfig/scalc/ui/datafielddialog.ui:320 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:306 msgctxt "datafielddialog|extended_tip|type" msgid "Select the type of calculating of the displayed value for the data field." msgstr "" #. DdvoS -#: sc/uiconfig/scalc/ui/datafielddialog.ui:335 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:321 msgctxt "datafielddialog|extended_tip|basefield" msgid "Select the field from which the respective value is taken as base for the calculation." msgstr "" #. u5kvr -#: sc/uiconfig/scalc/ui/datafielddialog.ui:349 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:335 msgctxt "datafielddialog|baseitem" msgid "- previous item -" msgstr "- 上個項目 -" #. qKCQG -#: sc/uiconfig/scalc/ui/datafielddialog.ui:350 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:336 msgctxt "datafielddialog|baseitem" msgid "- next item -" msgstr "- 下個項目 -" #. 3nUQE -#: sc/uiconfig/scalc/ui/datafielddialog.ui:354 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:340 msgctxt "datafielddialog|extended_tip|baseitem" msgid "Select the item of the base field from which the respective value is taken as base for the calculation." msgstr "" #. XxEhf -#: sc/uiconfig/scalc/ui/datafielddialog.ui:371 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:355 msgctxt "datafielddialog|label3" msgid "Displayed Value" msgstr "" #. mk9vJ -#: sc/uiconfig/scalc/ui/datafielddialog.ui:376 +#: sc/uiconfig/scalc/ui/datafielddialog.ui:360 msgctxt "datafielddialog|extended_tip|expander" msgid "Expands or reduces the dialog. The More button is visible for data fields only." msgstr "增大或縮小對話方塊。只有資料欄位可看見 [更多] 按鈕。" @@ -20884,193 +20967,193 @@ msgid "Data Field Options" msgstr "資料欄位選項" #. GWcDR -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:129 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:124 msgctxt "datafieldoptionsdialog|ascending" msgid "_Ascending" msgstr "升序(_A)" #. u8pkE -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:139 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:134 msgctxt "datafieldoptionsdialog|extended_tip|ascending" msgid "Sorts the values from the lowest value to the highest value. If the selected field is the field for which the dialog was opened, the items are sorted by name. If a data field was selected, the items are sorted by the resultant value of the selected data field." msgstr "" #. yk5PT -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:150 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:145 msgctxt "datafieldoptionsdialog|descending" msgid "_Descending" msgstr "降序(_D)" #. qyGGy -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:160 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:155 msgctxt "datafieldoptionsdialog|extended_tip|descending" msgid "Sorts the values descending from the highest value to the lowest value. If the selected field is the field for which the dialog was opened, the items are sorted by name. If a data field was selected, the items are sorted by the resultant value of the selected data field." msgstr "" #. WoRxx -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:171 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:166 msgctxt "datafieldoptionsdialog|manual" msgid "_Manual" msgstr "手動(_M)" #. Sy9uF -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:181 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:176 msgctxt "datafieldoptionsdialog|extended_tip|manual" msgid "Sorts values alphabetically." msgstr "" #. cdBMn -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:198 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:193 msgctxt "datafieldoptionsdialog|extended_tip|sortby" msgid "Select the data field that you want to sort columns or rows by." msgstr "" #. tP8DZ -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:219 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:212 msgctxt "datafieldoptionsdialog|label1" msgid "Sort by" msgstr "排序依照" #. qQHXp -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:252 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:241 msgctxt "datafieldoptionsdialog|repeatitemlabels" msgid "_Repeat item labels" msgstr "重複項目標籤(_R)" #. VmmHC -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:268 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:257 msgctxt "datafieldoptionsdialog|emptyline" msgid "_Empty line after each item" msgstr "在每個項目後放置空白行(_E)" #. AxAtj -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:277 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:266 msgctxt "datafieldoptionsdialog|extended_tip|emptyline" msgid "Adds an empty row after the data for each item in the pivot table." msgstr "" #. xA7WG -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:291 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:280 msgctxt "datafieldoptionsdialog|label3" msgid "_Layout:" msgstr "版面配置(_L)：" #. ACFGW -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:307 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:296 msgctxt "datafieldoptionsdialog|layout" msgid "Tabular layout" msgstr "表格版面配置" #. H4v3c -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:308 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:297 msgctxt "datafieldoptionsdialog|layout" msgid "Outline layout with subtotals at the top" msgstr "上方顯示小計的大綱版面配置" #. 2aDMy -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:309 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:298 msgctxt "datafieldoptionsdialog|layout" msgid "Outline layout with subtotals at the bottom" msgstr "下方顯示小計的大綱版面配置" #. CocpF -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:313 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:302 msgctxt "datafieldoptionsdialog|extended_tip|layout" msgid "Select the layout mode for the field in the list box." msgstr "" #. qSCvn -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:330 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:317 msgctxt "datafieldoptionsdialog|label2" msgid "Display Options" msgstr "顯示選項" #. Q34EM -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:363 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:346 msgctxt "datafieldoptionsdialog|show" msgid "_Show:" msgstr "顯示(_S)：" #. XRAd3 -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:375 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:358 msgctxt "datafieldoptionsdialog|extended_tip|show" msgid "Turns on the automatic show feature." msgstr "" #. n8bpz -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:388 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:371 msgctxt "datafieldoptionsdialog|showfromft" msgid "_From:" msgstr "取自(_F)：" #. C9kFV -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:402 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:385 msgctxt "datafieldoptionsdialog|usingft" msgid "_Using field:" msgstr "使用欄位(_U)：" #. XVkqZ -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:422 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:405 msgctxt "datafieldoptionsdialog|showft" msgid "items" msgstr "項目" #. CKCMD -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:442 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:425 msgctxt "datafieldoptionsdialog|extended_tip|items" msgid "Enter the maximum number of items that you want to show automatically." msgstr "" #. 6WBE7 -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:462 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:445 msgctxt "datafieldoptionsdialog|from" msgid "Top" msgstr "上方" #. GUPny -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:463 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:446 msgctxt "datafieldoptionsdialog|from" msgid "Bottom" msgstr "下方" #. PAGqB -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:467 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:450 msgctxt "datafieldoptionsdialog|extended_tip|from" msgid "Shows the top or bottom items in the specified sort order." msgstr "" #. 7dxVF -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:482 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:465 msgctxt "datafieldoptionsdialog|extended_tip|using" msgid "Select the data field that you want to sort the data by." msgstr "" #. sVRqx -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:499 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:480 msgctxt "datafieldoptionsdialog|label4" msgid "Show Automatically" msgstr "自動顯示" #. kiXTb -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:576 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:551 msgctxt "datafieldoptionsdialog|extended_tip|hideitems" msgid "Select the items that you want to hide from the calculations." msgstr "" #. FDavv -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:589 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:562 msgctxt "datafieldoptionsdialog|label9" msgid "Hide Items" msgstr "隱藏項目" #. foyVo -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:613 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:586 msgctxt "datafieldoptionsdialog|extended_tip|hierarchy" msgid "Select the hierarchy that you want to use. The pivot table must be based on an external source data that contains data hierarchies." msgstr "" #. qTAzs -#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:626 +#: sc/uiconfig/scalc/ui/datafieldoptionsdialog.ui:599 msgctxt "datafieldoptionsdialog|hierarchyft" msgid "Hierarch_y:" msgstr "階層(_Y)：" @@ -21166,97 +21249,97 @@ msgid "Live Data Streams" msgstr "即時資料串流" #. BjFaA -#: sc/uiconfig/scalc/ui/datastreams.ui:109 +#: sc/uiconfig/scalc/ui/datastreams.ui:105 msgctxt "datastreams|label6" msgid "URL:" msgstr "URL：" #. GUSse -#: sc/uiconfig/scalc/ui/datastreams.ui:121 +#: sc/uiconfig/scalc/ui/datastreams.ui:117 msgctxt "datastreams|url|tooltip_text" msgid "Enter the URL of the source document in the local file system or Internet here." msgstr "請在此處輸入本機檔案系統中的，或網際網路中來源文件的 URL。" #. RbmeF -#: sc/uiconfig/scalc/ui/datastreams.ui:139 +#: sc/uiconfig/scalc/ui/datastreams.ui:135 msgctxt "datastreams|browse" msgid "_Browse..." msgstr "瀏覽(_B)..." #. Kyv5C -#: sc/uiconfig/scalc/ui/datastreams.ui:179 +#: sc/uiconfig/scalc/ui/datastreams.ui:171 msgctxt "datastreams|valuesinline" msgid "value1,value2,...,valueN, and fill into range:" msgstr "值1,值2,...,值N，並填入範圍中：" #. FbeJ5 -#: sc/uiconfig/scalc/ui/datastreams.ui:195 +#: sc/uiconfig/scalc/ui/datastreams.ui:187 msgctxt "datastreams|addressvalue" msgid "address,value" msgstr "地址,值" #. vHGFG -#: sc/uiconfig/scalc/ui/datastreams.ui:232 +#: sc/uiconfig/scalc/ui/datastreams.ui:222 msgctxt "datastreams|label4" msgid "Interpret stream data as" msgstr "將串流資料解譯為" #. vcDx2 -#: sc/uiconfig/scalc/ui/datastreams.ui:245 +#: sc/uiconfig/scalc/ui/datastreams.ui:235 msgctxt "datastreams|refresh_ui" msgid "Empty lines trigger UI refresh" msgstr "空白列觸發使用介面重整" #. 3hWhd -#: sc/uiconfig/scalc/ui/datastreams.ui:268 +#: sc/uiconfig/scalc/ui/datastreams.ui:256 msgctxt "datastreams|label" msgid "Source Stream" msgstr "來源串流" #. kkNat -#: sc/uiconfig/scalc/ui/datastreams.ui:309 +#: sc/uiconfig/scalc/ui/datastreams.ui:293 msgctxt "datastreams|datadown" msgid "Move existing data down" msgstr "下移既有資料" #. oK7F4 -#: sc/uiconfig/scalc/ui/datastreams.ui:325 +#: sc/uiconfig/scalc/ui/datastreams.ui:309 msgctxt "datastreams|rangedown" msgid "Move the range down" msgstr "下移資料範圍" #. 2uAZA -#: sc/uiconfig/scalc/ui/datastreams.ui:343 +#: sc/uiconfig/scalc/ui/datastreams.ui:327 msgctxt "datastreams|nomove" msgid "Overwrite existing data" msgstr "覆寫既有資料" #. mvcXx -#: sc/uiconfig/scalc/ui/datastreams.ui:366 +#: sc/uiconfig/scalc/ui/datastreams.ui:348 msgctxt "datastreams|label2" msgid "When New Data Arrives" msgstr "當新資料抵達時" #. 5i8Be -#: sc/uiconfig/scalc/ui/datastreams.ui:401 +#: sc/uiconfig/scalc/ui/datastreams.ui:379 msgctxt "datastreams|maxlimit" msgid "Limit to:" msgstr "限制為：" #. GLYms -#: sc/uiconfig/scalc/ui/datastreams.ui:430 +#: sc/uiconfig/scalc/ui/datastreams.ui:408 msgctxt "datastreams|unlimited" msgid "_Unlimited" msgstr "無限制(_U)" #. DvF6M -#: sc/uiconfig/scalc/ui/datastreams.ui:456 +#: sc/uiconfig/scalc/ui/datastreams.ui:432 msgctxt "datastreams|label3" msgid "Maximal Amount of Rows" msgstr "最大列數" #. zGb3D -#: sc/uiconfig/scalc/ui/datastreams.ui:495 +#: sc/uiconfig/scalc/ui/datastreams.ui:471 msgctxt "datastreams|extended_tip|DataStreamDialog" msgid "Live data stream for spreadsheets" msgstr "" @@ -21412,139 +21495,139 @@ msgid "Closes dialog and discards all changes." msgstr "" #. RMghE -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:175 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:170 msgctxt "definedatabaserangedialog|extended_tip|entry" msgid "Enter a name for the database range that you want to define, or select an existing name from the list." msgstr "輸入要定義的資料庫範圍之名稱，或者從清單中選取現有的名稱。" #. 4FqWF -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:192 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:185 msgctxt "definedatabaserangedialog|Name" msgid "Name" msgstr "名稱" #. phDVh -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:232 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:221 msgctxt "definedatabaserangedialog|extended_tip|assign" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. ySCS4 -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:249 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:238 msgctxt "definedatabaserangedialog|extended_tip|assignrb" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. FUAH2 -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:267 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:254 msgctxt "definedatabaserangedialog|Range" msgid "Range" msgstr "範圍" #. CPDFA -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:295 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:282 msgctxt "definedatabaserangedialog|extended_tip|add" msgid "Adds the selected cell range to the database range list, or modifies an existing database range." msgstr "將選取的儲存格範圍加入資料庫範圍清單中，或修改現有資料庫範圍。" #. N8Lui -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:307 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:294 msgctxt "definedatabaserangedialog|modify" msgid "M_odify" msgstr "修改(_O)" #. AGETd -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:328 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:315 msgctxt "definedatabaserangedialog|extended_tip|delete" msgid "Deletes the selected element or elements without requiring confirmation." msgstr "刪除一或多個選取的元素時不需要確認。" #. TniCB -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:366 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:348 msgctxt "definedatabaserangedialog|ContainsColumnLabels" msgid "Co_ntains column labels" msgstr "包含欄標籤(_N)" #. FYwzQ -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:375 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:357 msgctxt "definedatabaserangedialog|extended_tip|ContainsColumnLabels" msgid "Selected cell ranges contains labels." msgstr "選取的儲存格範圍包含貼標。" #. QBs5X -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:387 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:369 msgctxt "definedatabaserangedialog|ContainsTotalsRow" msgid "Contains _totals row" msgstr "包含總計列(_T)" #. AeZB2 -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:403 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:385 msgctxt "definedatabaserangedialog|InsertOrDeleteCells" msgid "Insert or delete _cells" msgstr "插入或刪除儲存格(_C)" #. bJdCS -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:412 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:394 msgctxt "definedatabaserangedialog|extended_tip|InsertOrDeleteCells" msgid "Automatically inserts new rows and columns into the database range in your document when new records are added to the database." msgstr "" #. EveBu -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:424 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:406 msgctxt "definedatabaserangedialog|KeepFormatting" msgid "Keep _formatting" msgstr "保留格式設定(_F)" #. nwtDB -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:433 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:415 msgctxt "definedatabaserangedialog|extended_tip|KeepFormatting" msgid "Applies the existing cell format of headers and first data row to the whole database range." msgstr "將各標題和第一個資料列的現有儲存格格式採用至整個資料庫範圍。" #. rSf5f -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:445 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:427 msgctxt "definedatabaserangedialog|DontSaveImportedData" msgid "Don't save _imported data" msgstr "不儲存匯入的資料(_I)" #. mDon4 -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:454 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:436 msgctxt "definedatabaserangedialog|extended_tip|DontSaveImportedData" msgid "Only saves a reference to the database, and not the contents of the cells." msgstr "僅儲存資料庫參照，不儲存儲存格內容。" #. nYJiV -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:468 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:450 msgctxt "definedatabaserangedialog|Source" msgid "Source:" msgstr "來源：" #. q2F5V -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:481 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:463 msgctxt "definedatabaserangedialog|Operations" msgid "Operations:" msgstr "操作：" #. XXY4E -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:494 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:476 msgctxt "definedatabaserangedialog|invalid" msgid "Invalid range" msgstr "無效的範圍" #. dHJw9 -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:511 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:491 msgctxt "definedatabaserangedialog|label1" msgid "Options" msgstr "選項" #. 4KFEA -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:516 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:496 msgctxt "definedatabaserangedialog|extended_tip|more" msgid "Shows additional options." msgstr "顯示其他選項." #. swLE2 -#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:545 +#: sc/uiconfig/scalc/ui/definedatabaserangedialog.ui:525 msgctxt "definedatabaserangedialog|extended_tip|DefineDatabaseRangeDialog" msgid "Defines a database range based on the selected cells in your sheet." msgstr "依試算表中選取的儲存格來定義資料庫範圍。" @@ -21676,61 +21759,61 @@ msgid "Delete Cells" msgstr "刪除儲存格" #. UXfkG -#: sc/uiconfig/scalc/ui/deletecells.ui:96 +#: sc/uiconfig/scalc/ui/deletecells.ui:92 msgctxt "deletecells|up" msgid "Shift cells _up" msgstr "向上移動儲存格(_U)" #. 7nz4V -#: sc/uiconfig/scalc/ui/deletecells.ui:106 +#: sc/uiconfig/scalc/ui/deletecells.ui:102 msgctxt "deletecells|extended_tip|up" msgid "Fills the space produced by the deleted cells with the cells underneath it." msgstr "將被刪除的儲存格下方的儲存格向上移動，填入刪除後產生的空白。" #. 4ChEi -#: sc/uiconfig/scalc/ui/deletecells.ui:118 +#: sc/uiconfig/scalc/ui/deletecells.ui:114 msgctxt "deletecells|left" msgid "Shift cells _left" msgstr "向左移動儲存格(_L)" #. GPMfP -#: sc/uiconfig/scalc/ui/deletecells.ui:128 +#: sc/uiconfig/scalc/ui/deletecells.ui:124 msgctxt "deletecells|extended_tip|left" msgid "Fills the resulting space by the cells to the right of the deleted cells." msgstr "將被刪除儲存格右側的儲存格向左移動，填入刪除後產生的空白。" #. xhSFC -#: sc/uiconfig/scalc/ui/deletecells.ui:140 +#: sc/uiconfig/scalc/ui/deletecells.ui:136 msgctxt "deletecells|rows" msgid "Delete entire _row(s)" msgstr "刪除整列(_R)" #. S2ECx -#: sc/uiconfig/scalc/ui/deletecells.ui:150 +#: sc/uiconfig/scalc/ui/deletecells.ui:146 msgctxt "deletecells|extended_tip|rows" msgid "After selecting at least one cell, deletes the entire row from the sheet." msgstr "選取至少一個儲存格後，從試算表中刪除所選儲存格所在的整列。" #. ky4n4 -#: sc/uiconfig/scalc/ui/deletecells.ui:162 +#: sc/uiconfig/scalc/ui/deletecells.ui:158 msgctxt "deletecells|cols" msgid "Delete entire _column(s)" msgstr "刪除整欄(_C)" #. PEddf -#: sc/uiconfig/scalc/ui/deletecells.ui:172 +#: sc/uiconfig/scalc/ui/deletecells.ui:168 msgctxt "deletecells|extended_tip|cols" msgid "After selecting at least one cell, deletes the entire column from the sheet." msgstr "選取至少一個儲存格後，從試算表中刪除所選儲存格所在的整欄。" #. fFD3Q -#: sc/uiconfig/scalc/ui/deletecells.ui:190 +#: sc/uiconfig/scalc/ui/deletecells.ui:184 msgctxt "deletecells|label1" msgid "Selection" msgstr "選取" #. tXR8A -#: sc/uiconfig/scalc/ui/deletecells.ui:215 +#: sc/uiconfig/scalc/ui/deletecells.ui:209 msgctxt "deletecells|extended_tip|DeleteCellsDialog" msgid "Completely deletes selected cells, columns or rows. The cells below or to the right of the deleted cells will fill the space." msgstr "完全刪除所選的儲存格、欄或列。刪除的儲存格其下方或右方的儲存格將以空格填入。" @@ -21760,109 +21843,109 @@ msgid "Delete Contents" msgstr "刪除內容" #. hFamV -#: sc/uiconfig/scalc/ui/deletecontents.ui:96 +#: sc/uiconfig/scalc/ui/deletecontents.ui:92 msgctxt "deletecontents|deleteall" msgid "Delete _all" msgstr "全部刪除(_A)" #. EzX8U -#: sc/uiconfig/scalc/ui/deletecontents.ui:105 +#: sc/uiconfig/scalc/ui/deletecontents.ui:101 msgctxt "deletecontents|extended_tip|deleteall" msgid "Deletes all content from the selected cell range." msgstr "從選取的儲存格範圍中刪除所有內容。" #. cjPVi -#: sc/uiconfig/scalc/ui/deletecontents.ui:125 +#: sc/uiconfig/scalc/ui/deletecontents.ui:121 msgctxt "deletecontents|text" msgid "_Text" msgstr "大寫字(_T)" #. BzXFc -#: sc/uiconfig/scalc/ui/deletecontents.ui:134 +#: sc/uiconfig/scalc/ui/deletecontents.ui:130 msgctxt "deletecontents|extended_tip|text" msgid "Deletes text only. Formats, formulas, numbers and dates are not affected." msgstr "僅刪除文字。格式、公式、數字和日期不受影響。" #. pNGEC -#: sc/uiconfig/scalc/ui/deletecontents.ui:145 +#: sc/uiconfig/scalc/ui/deletecontents.ui:141 msgctxt "deletecontents|numbers" msgid "_Numbers" msgstr "數字(_N)" #. HdAdi -#: sc/uiconfig/scalc/ui/deletecontents.ui:154 +#: sc/uiconfig/scalc/ui/deletecontents.ui:150 msgctxt "deletecontents|extended_tip|numbers" msgid "Deletes numbers only. Formats and formulas remain unchanged." msgstr "僅刪除數字。格式和公式保持不變。" #. iNGBK -#: sc/uiconfig/scalc/ui/deletecontents.ui:165 +#: sc/uiconfig/scalc/ui/deletecontents.ui:161 msgctxt "deletecontents|datetime" msgid "_Date & time" msgstr "日期和時間(_D)" #. uYNYA -#: sc/uiconfig/scalc/ui/deletecontents.ui:174 +#: sc/uiconfig/scalc/ui/deletecontents.ui:170 msgctxt "deletecontents|extended_tip|datetime" msgid "Deletes date and time values. Formats, text, numbers and formulas remain unchanged." msgstr "刪除日期值和時間值。格式、文字、數字和公式保持不變。" #. igEyD -#: sc/uiconfig/scalc/ui/deletecontents.ui:185 +#: sc/uiconfig/scalc/ui/deletecontents.ui:181 msgctxt "deletecontents|formulas" msgid "_Formulas" msgstr "公式(_F)" #. XTY3K -#: sc/uiconfig/scalc/ui/deletecontents.ui:194 +#: sc/uiconfig/scalc/ui/deletecontents.ui:190 msgctxt "deletecontents|extended_tip|formulas" msgid "Deletes formulas. Text, numbers, formats, dates and times remain unchanged." msgstr "刪除公式。文字、數字、格式、日期和時間保持不變。" #. qhUoD -#: sc/uiconfig/scalc/ui/deletecontents.ui:205 +#: sc/uiconfig/scalc/ui/deletecontents.ui:201 msgctxt "deletecontents|comments" msgid "_Comments" msgstr "評註(_C)" #. psiqN -#: sc/uiconfig/scalc/ui/deletecontents.ui:214 +#: sc/uiconfig/scalc/ui/deletecontents.ui:210 msgctxt "deletecontents|extended_tip|comments" msgid "Deletes comments added to cells. All other elements remain unchanged." msgstr "刪除增加至儲存格的評註。所有其他元素維持不變。" #. bCyju -#: sc/uiconfig/scalc/ui/deletecontents.ui:225 +#: sc/uiconfig/scalc/ui/deletecontents.ui:221 msgctxt "deletecontents|formats" msgid "For_mats" msgstr "格式(_M)" #. 4F3RM -#: sc/uiconfig/scalc/ui/deletecontents.ui:234 +#: sc/uiconfig/scalc/ui/deletecontents.ui:230 msgctxt "deletecontents|extended_tip|formats" msgid "Deletes format attributes applied to cells. All cell content remains unchanged." msgstr "刪除儲存格套用的格式屬性。所有儲存格內容保持不變。" #. VhmVs -#: sc/uiconfig/scalc/ui/deletecontents.ui:245 +#: sc/uiconfig/scalc/ui/deletecontents.ui:241 msgctxt "deletecontents|objects" msgid "_Objects" msgstr "物件(_O)" #. 4GgHE -#: sc/uiconfig/scalc/ui/deletecontents.ui:254 +#: sc/uiconfig/scalc/ui/deletecontents.ui:250 msgctxt "deletecontents|extended_tip|objects" msgid "Deletes objects. All cell content remains unchanged." msgstr "刪除物件。所有儲存格內容保持不變。" #. gF92Z -#: sc/uiconfig/scalc/ui/deletecontents.ui:281 +#: sc/uiconfig/scalc/ui/deletecontents.ui:275 msgctxt "deletecontents|label2" msgid "Selection" msgstr "選取" #. SSeBL -#: sc/uiconfig/scalc/ui/deletecontents.ui:306 +#: sc/uiconfig/scalc/ui/deletecontents.ui:300 msgctxt "deletecontents|extended_tip|DeleteContentsDialog" msgid "Specifies the contents to be deleted from the active cell or from a selected cell range." msgstr "指定要從使用中儲存格或選取的儲存格範圍中刪除的內容。" @@ -21874,43 +21957,43 @@ msgid "Descriptive Statistics" msgstr "描述性統計" #. bFQ3F -#: sc/uiconfig/scalc/ui/descriptivestatisticsdialog.ui:101 +#: sc/uiconfig/scalc/ui/descriptivestatisticsdialog.ui:97 msgctxt "descriptivestatisticsdialog|input-range-label" msgid "Input range:" msgstr "輸入範圍：" #. dDhc5 -#: sc/uiconfig/scalc/ui/descriptivestatisticsdialog.ui:140 +#: sc/uiconfig/scalc/ui/descriptivestatisticsdialog.ui:136 msgctxt "descriptivestatisticsdialog|output-range-label" msgid "Results to:" msgstr "結果為：" #. Z83k7 -#: sc/uiconfig/scalc/ui/descriptivestatisticsdialog.ui:183 +#: sc/uiconfig/scalc/ui/descriptivestatisticsdialog.ui:177 msgctxt "descriptivestatisticsdialog|label1" msgid "Data" msgstr "資料" #. ABEPC -#: sc/uiconfig/scalc/ui/descriptivestatisticsdialog.ui:219 +#: sc/uiconfig/scalc/ui/descriptivestatisticsdialog.ui:209 msgctxt "descriptivestatisticsdialog|groupedby-columns-radio" msgid "_Columns" msgstr "欄(_C)" #. 45rGR -#: sc/uiconfig/scalc/ui/descriptivestatisticsdialog.ui:235 +#: sc/uiconfig/scalc/ui/descriptivestatisticsdialog.ui:225 msgctxt "descriptivestatisticsdialog|groupedby-rows-radio" msgid "_Rows" msgstr "列(_R)" #. MKEzF -#: sc/uiconfig/scalc/ui/descriptivestatisticsdialog.ui:257 +#: sc/uiconfig/scalc/ui/descriptivestatisticsdialog.ui:245 msgctxt "descriptivestatisticsdialog|label2" msgid "Grouped by" msgstr "分組依據" #. 8UDQc -#: sc/uiconfig/scalc/ui/descriptivestatisticsdialog.ui:282 +#: sc/uiconfig/scalc/ui/descriptivestatisticsdialog.ui:270 msgctxt "descriptivestatisticsdialog|extended_tip|DescriptiveStatisticsDialog" msgid "Fill a table in the spreadsheet with the main statistical properties of the data set." msgstr "" @@ -21922,7 +22005,7 @@ msgid "Edit Setting" msgstr "編輯設定" #. X85Wx -#: sc/uiconfig/scalc/ui/doubledialog.ui:114 +#: sc/uiconfig/scalc/ui/doubledialog.ui:108 msgctxt "doubledialog|extended_tip|DoubleDialog" msgid "Enter or change the value of the selected setting." msgstr "" @@ -22036,79 +22119,79 @@ msgid "Displays the error message that you enter in the Contents area when inval msgstr "當儲存格中輸入了無效的資料時，會顯示您在 [內容] 區域內進行輸入的錯誤訊息。" #. pFAUd -#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:65 +#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:59 msgctxt "erroralerttabpage|action_label" msgid "_Action:" msgstr "動作(_A)：" #. 6uRXn -#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:79 +#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:73 msgctxt "erroralerttabpage|title_label" msgid "_Title:" msgstr "題名(_T)：" #. awD2D -#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:103 +#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:97 msgctxt "erroralerttabpage|extended_tip|errorMsg" msgid "Enter the message that you want to display when invalid data is entered in a cell." msgstr "輸入當儲存格中輸入了無效的資料時要顯示的訊息。" #. HS6Tu -#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:131 +#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:125 msgctxt "erroralerttabpage|errormsg_label" msgid "_Error message:" msgstr "錯誤訊息(_E)：" #. gFYoH -#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:144 +#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:138 msgctxt "erroralerttabpage|browseBtn" msgid "_Browse..." msgstr "瀏覽(_B)..." #. pWEXG -#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:151 +#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:145 msgctxt "erroralerttabpage|extended_tip|browseBtn" msgid "Opens the Macro dialog where you can select the macro that is executed when invalid data is entered in a cell. The macro is executed after the error message is displayed." msgstr "開啟[巨集] 對話方塊，在此處您可以選取當儲存格中輸入了無效資料時執行的巨集。此巨集在顯示錯誤訊息後執行。" #. BKReu -#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:166 +#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:160 msgctxt "erroralerttabpage|actionCB" msgid "Stop" msgstr "停止" #. oBEAz -#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:167 +#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:161 msgctxt "erroralerttabpage|actionCB" msgid "Warning" msgstr "警告" #. mfW77 -#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:168 +#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:162 msgctxt "erroralerttabpage|actionCB" msgid "Information" msgstr "資訊" #. D974D -#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:169 +#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:163 msgctxt "erroralerttabpage|actionCB" msgid "Macro" msgstr "巨集" #. zCdHM -#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:173 +#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:167 msgctxt "erroralerttabpage|extended_tip|actionCB" msgid "Select the action that you want to occur when invalid data is entered in a cell." msgstr "選取當儲存格中輸入了無效的資料時要發生的動作。" #. 88Yb3 -#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:190 +#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:182 msgctxt "erroralerttabpage|label1" msgid "Contents" msgstr "內容" #. q2Cbr -#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:205 +#: sc/uiconfig/scalc/ui/erroralerttabpage.ui:197 msgctxt "erroralerttabpage|extended_tip|ErrorAlertTabPage" msgid "Define the error message that is displayed when invalid data is entered in a cell." msgstr "定義當儲存格中輸入了無效資料時顯示的錯誤訊息。" @@ -22120,55 +22203,55 @@ msgid "Exponential Smoothing" msgstr "指數平滑" #. ZCUFP -#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:107 +#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:103 msgctxt "exponentialsmoothingdialog|input-range-label" msgid "Input range:" msgstr "輸入範圍：" #. XCDYH -#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:146 +#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:142 msgctxt "exponentialsmoothingdialog|output-range-label" msgid "Results to:" msgstr "結果為：" #. nq9yR -#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:189 +#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:183 msgctxt "exponentialsmoothingdialog|label5" msgid "Data" msgstr "資料" #. 5bpGm -#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:225 +#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:215 msgctxt "exponentialsmoothingdialog|groupedby-columns-radio" msgid "Columns" msgstr "欄" #. kRqVA -#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:241 +#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:231 msgctxt "exponentialsmoothingdialog|groupedby-rows-radio" msgid "Rows" msgstr "列" #. JU2hx -#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:263 +#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:251 msgctxt "exponentialsmoothingdialog|label2" msgid "Grouped by" msgstr "分組依據" #. w4UYJ -#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:301 +#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:285 msgctxt "exponentialsmoothingdialog|smoothing-factor-label" msgid "Smoothing factor:" msgstr "平滑係數：" #. E4nAQ -#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:334 +#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:316 msgctxt "exponentialsmoothingdialog|label1" msgid "Parameters" msgstr "參數" #. kcYtb -#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:359 +#: sc/uiconfig/scalc/ui/exponentialsmoothingdialog.ui:341 msgctxt "exponentialsmoothingdialog|extended_tip|ExponentialSmoothingDialog" msgid "Results in a smoothed data series" msgstr "" @@ -22180,73 +22263,73 @@ msgid "External Data" msgstr "外部資料" #. APBGW -#: sc/uiconfig/scalc/ui/externaldata.ui:129 +#: sc/uiconfig/scalc/ui/externaldata.ui:124 msgctxt "externaldata|url|tooltip_text" msgid "Enter the URL of the source document in the local file system or Internet here." msgstr "請在此處輸入本機檔案系統中或網際網路中來源文件的 URL。" #. CvbAp -#: sc/uiconfig/scalc/ui/externaldata.ui:140 +#: sc/uiconfig/scalc/ui/externaldata.ui:135 msgctxt "externaldata|extended_tip|url" msgid "Enter the URL or the file name that contains the data that you want to insert, and then press Enter." msgstr "" #. 2sbsJ -#: sc/uiconfig/scalc/ui/externaldata.ui:152 +#: sc/uiconfig/scalc/ui/externaldata.ui:147 msgctxt "externaldata|browse" msgid "_Browse..." msgstr "瀏覽(_B)..." #. jrW22 -#: sc/uiconfig/scalc/ui/externaldata.ui:159 +#: sc/uiconfig/scalc/ui/externaldata.ui:154 msgctxt "externaldata|extended_tip|browse" msgid "Open a file dialog to locate the file containing the data you want to insert." msgstr "" #. FpyfT -#: sc/uiconfig/scalc/ui/externaldata.ui:184 +#: sc/uiconfig/scalc/ui/externaldata.ui:177 msgctxt "externaldata|label1" msgid "URL of _External Data Source" msgstr "外部資料來源的 URL(_E)" #. x9ENQ -#: sc/uiconfig/scalc/ui/externaldata.ui:254 +#: sc/uiconfig/scalc/ui/externaldata.ui:241 msgctxt "externaldata|extended_tip|ranges" msgid "Select the table or the data range that you want to insert." msgstr "" #. EhEDC -#: sc/uiconfig/scalc/ui/externaldata.ui:273 +#: sc/uiconfig/scalc/ui/externaldata.ui:260 msgctxt "externaldata|reload" msgid "_Update every:" msgstr "更新間隔為每(_U)：" #. kidEA -#: sc/uiconfig/scalc/ui/externaldata.ui:285 +#: sc/uiconfig/scalc/ui/externaldata.ui:272 msgctxt "externaldata|extended_tip|reload" msgid "Enter the number of seconds to wait before the external data are reloaded into the current document." msgstr "輸入外部資料重新載入目前的文件之前所要等待的秒數。" #. rytN5 -#: sc/uiconfig/scalc/ui/externaldata.ui:311 +#: sc/uiconfig/scalc/ui/externaldata.ui:298 msgctxt "externaldata|extended_tip|delay" msgid "Enter the number of seconds to wait before the external data are reloaded into the current document." msgstr "輸入外部資料重新載入目前的文件之前所要等待的秒數。" #. eSJFW -#: sc/uiconfig/scalc/ui/externaldata.ui:325 +#: sc/uiconfig/scalc/ui/externaldata.ui:312 msgctxt "externaldata|secondsft" msgid "_seconds" msgstr "秒(_S)" #. iBSZx -#: sc/uiconfig/scalc/ui/externaldata.ui:356 +#: sc/uiconfig/scalc/ui/externaldata.ui:341 msgctxt "externaldata|label2" msgid "_Available Tables/Ranges" msgstr "可用的表格或範圍(_A)" #. b9pvu -#: sc/uiconfig/scalc/ui/externaldata.ui:390 +#: sc/uiconfig/scalc/ui/externaldata.ui:375 msgctxt "externaldata|extended_tip|ExternalDataDialog" msgid "Inserts data from an HTML, Calc, CSV or Excel file into the current sheet as a link. The data must be located within a named range." msgstr "" @@ -22258,206 +22341,206 @@ msgid "Fill Series" msgstr "填入數列" #. S4ehT -#: sc/uiconfig/scalc/ui/filldlg.ui:105 +#: sc/uiconfig/scalc/ui/filldlg.ui:100 msgctxt "filldlg|down" msgid "_Down" msgstr "下(_D)" #. FK3U8 -#: sc/uiconfig/scalc/ui/filldlg.ui:115 +#: sc/uiconfig/scalc/ui/filldlg.ui:110 msgctxt "filldlg|extended_tip|down" msgid "Creates a downward series in the selected cell range for the column using the defined increment to the end value." msgstr "使用定義的最終數值的遞增，在欄的選取儲存格範圍中建立向下排列。" #. KwAZX -#: sc/uiconfig/scalc/ui/filldlg.ui:127 +#: sc/uiconfig/scalc/ui/filldlg.ui:122 msgctxt "filldlg|right" msgid "_Right" msgstr "右(_R)" #. UGDpf -#: sc/uiconfig/scalc/ui/filldlg.ui:137 +#: sc/uiconfig/scalc/ui/filldlg.ui:132 msgctxt "filldlg|extended_tip|right" msgid "Creates a series running from left to right within the selected cell range using the defined increment to the end value." msgstr "依定義的最終數值遞增，在選取的儲存格範圍中從左向右建立排列。" #. pGFFC -#: sc/uiconfig/scalc/ui/filldlg.ui:149 +#: sc/uiconfig/scalc/ui/filldlg.ui:144 msgctxt "filldlg|up" msgid "_Up" msgstr "上(_U)" #. y6hB6 -#: sc/uiconfig/scalc/ui/filldlg.ui:159 +#: sc/uiconfig/scalc/ui/filldlg.ui:154 msgctxt "filldlg|extended_tip|up" msgid "Creates an upward series in the cell range of the column using the defined increment to the end value." msgstr "使用定義的最終數值的遞增，在欄的儲存格範圍中建立向上排列。" #. eR9rC -#: sc/uiconfig/scalc/ui/filldlg.ui:171 +#: sc/uiconfig/scalc/ui/filldlg.ui:166 msgctxt "filldlg|left" msgid "_Left" msgstr "左(_L)" #. CZSAg -#: sc/uiconfig/scalc/ui/filldlg.ui:181 +#: sc/uiconfig/scalc/ui/filldlg.ui:176 msgctxt "filldlg|extended_tip|left" msgid "Creates a series running from right to left in the selected cell range using the defined increment to the end value." msgstr "使用定義的最終數值的遞增，在選取的儲存格範圍中從右向左建立排列。" #. DFeXS -#: sc/uiconfig/scalc/ui/filldlg.ui:200 +#: sc/uiconfig/scalc/ui/filldlg.ui:193 msgctxt "filldlg|label1" msgid "Direction" msgstr "方向" #. yin3x -#: sc/uiconfig/scalc/ui/filldlg.ui:235 +#: sc/uiconfig/scalc/ui/filldlg.ui:223 msgctxt "filldlg|linear" msgid "Li_near" msgstr "線性(_N)" #. ANeeA -#: sc/uiconfig/scalc/ui/filldlg.ui:245 +#: sc/uiconfig/scalc/ui/filldlg.ui:233 msgctxt "filldlg|extended_tip|linear" msgid "Creates a linear number series using the defined increment and end value." msgstr "使用定義的遞增和最終數值建立線性數字排列。" #. rDwaa -#: sc/uiconfig/scalc/ui/filldlg.ui:257 +#: sc/uiconfig/scalc/ui/filldlg.ui:245 msgctxt "filldlg|growth" msgid "_Growth" msgstr "等比(_G)" #. Ve8TQ -#: sc/uiconfig/scalc/ui/filldlg.ui:267 +#: sc/uiconfig/scalc/ui/filldlg.ui:255 msgctxt "filldlg|extended_tip|growth" msgid "Creates a growth series using the defined increment and end value." msgstr "使用定義的遞增和最終數值建立成長排列。" #. hJEhP -#: sc/uiconfig/scalc/ui/filldlg.ui:279 +#: sc/uiconfig/scalc/ui/filldlg.ui:267 msgctxt "filldlg|date" msgid "Da_te" msgstr "日期(_T)" #. 7VCDM -#: sc/uiconfig/scalc/ui/filldlg.ui:289 +#: sc/uiconfig/scalc/ui/filldlg.ui:277 msgctxt "filldlg|extended_tip|date" msgid "Creates a date series using the defined increment and end date." msgstr "使用定義的遞增和最終日期建立日期排列。" #. mDADM -#: sc/uiconfig/scalc/ui/filldlg.ui:301 +#: sc/uiconfig/scalc/ui/filldlg.ui:289 msgctxt "filldlg|autofill" msgid "_AutoFill" msgstr "自動填入(_A)" #. pzZdq -#: sc/uiconfig/scalc/ui/filldlg.ui:311 +#: sc/uiconfig/scalc/ui/filldlg.ui:299 msgctxt "filldlg|extended_tip|autofill" msgid "Forms a series directly in the sheet." msgstr "" #. GhoPg -#: sc/uiconfig/scalc/ui/filldlg.ui:330 +#: sc/uiconfig/scalc/ui/filldlg.ui:316 msgctxt "filldlg|label2" msgid "Series Type" msgstr "數列類型" #. 3Mtj5 -#: sc/uiconfig/scalc/ui/filldlg.ui:365 +#: sc/uiconfig/scalc/ui/filldlg.ui:346 msgctxt "filldlg|day" msgid "Da_y" msgstr "天(_Y)" #. HF9aC -#: sc/uiconfig/scalc/ui/filldlg.ui:375 +#: sc/uiconfig/scalc/ui/filldlg.ui:356 msgctxt "filldlg|extended_tip|day" msgid "Use the Date series type and this option to create a series using all seven days of the week. Unit of Increment is day." msgstr "" #. v2J3J -#: sc/uiconfig/scalc/ui/filldlg.ui:387 +#: sc/uiconfig/scalc/ui/filldlg.ui:368 msgctxt "filldlg|week" msgid "_Weekday" msgstr "週(_W)" #. X597m -#: sc/uiconfig/scalc/ui/filldlg.ui:398 +#: sc/uiconfig/scalc/ui/filldlg.ui:379 msgctxt "filldlg|extended_tip|week" msgid "Use the Date series type and this option to create a series only using the five weekdays. Unit of Increment is day." msgstr "" #. gjGCn -#: sc/uiconfig/scalc/ui/filldlg.ui:410 +#: sc/uiconfig/scalc/ui/filldlg.ui:391 msgctxt "filldlg|month" msgid "_Month" msgstr "月(_M)" #. 5AG5E -#: sc/uiconfig/scalc/ui/filldlg.ui:420 +#: sc/uiconfig/scalc/ui/filldlg.ui:401 msgctxt "filldlg|extended_tip|month" msgid "Use the Date series type and this option to form a series which unit of Increment is month." msgstr "" #. zwDGB -#: sc/uiconfig/scalc/ui/filldlg.ui:432 +#: sc/uiconfig/scalc/ui/filldlg.ui:413 msgctxt "filldlg|year" msgid "Y_ear" msgstr "年(_E)" #. ME4Da -#: sc/uiconfig/scalc/ui/filldlg.ui:442 +#: sc/uiconfig/scalc/ui/filldlg.ui:423 msgctxt "filldlg|extended_tip|year" msgid "Use the Date series type and this option to create a series which unit of Increment is year." msgstr "" #. J5aQN -#: sc/uiconfig/scalc/ui/filldlg.ui:461 +#: sc/uiconfig/scalc/ui/filldlg.ui:440 msgctxt "filldlg|tuL" msgid "Time Unit" msgstr "時間單位" #. 5BuDy -#: sc/uiconfig/scalc/ui/filldlg.ui:484 +#: sc/uiconfig/scalc/ui/filldlg.ui:463 msgctxt "filldlg|startL" msgid "_Start value:" msgstr "起始值(_S)：" #. mQQjH -#: sc/uiconfig/scalc/ui/filldlg.ui:498 +#: sc/uiconfig/scalc/ui/filldlg.ui:477 msgctxt "filldlg|endL" msgid "End _value:" msgstr "終止值(_V)：" #. UUkTb -#: sc/uiconfig/scalc/ui/filldlg.ui:512 +#: sc/uiconfig/scalc/ui/filldlg.ui:491 msgctxt "filldlg|incrementL" msgid "In_crement:" msgstr "遞增值(_C)：" #. keEyA -#: sc/uiconfig/scalc/ui/filldlg.ui:529 +#: sc/uiconfig/scalc/ui/filldlg.ui:508 msgctxt "filldlg|extended_tip|startValue" msgid "Determines the start value for the series." msgstr "決定排列的起始值。" #. Ubfua -#: sc/uiconfig/scalc/ui/filldlg.ui:545 +#: sc/uiconfig/scalc/ui/filldlg.ui:524 msgctxt "filldlg|extended_tip|endValue" msgid "Determines the end value for the series." msgstr "決定排列最終值。" #. LMokQ -#: sc/uiconfig/scalc/ui/filldlg.ui:561 +#: sc/uiconfig/scalc/ui/filldlg.ui:540 #, fuzzy msgctxt "filldlg|extended_tip|increment" msgid "Determines the value by which the series of the selected type increases by each step." msgstr "決定依每個步驟增加的選取類型排列的值。" #. AvMwH -#: sc/uiconfig/scalc/ui/filldlg.ui:599 +#: sc/uiconfig/scalc/ui/filldlg.ui:578 msgctxt "filldlg|extended_tip|FillSeriesDialog" msgid "Automatically generate series with the options in this dialog. Determine direction, increment, time unit and series type." msgstr "" @@ -22668,67 +22751,67 @@ msgid "Detailed Calculation Settings" msgstr "詳細的計算設定" #. LH7AT -#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:99 +#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:95 msgctxt "formulacalculationoptions|labelConvT2N" msgid "Conversion from text to number:" msgstr "將文字轉換成數字：" #. LRBFh -#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:111 +#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:107 msgctxt "formulacalculationoptions|checkEmptyAsZero" msgid "Treat _empty string as zero" msgstr "將空白字串視為零(_E)" #. VDwUW -#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:129 +#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:125 msgctxt "formulacalculationoptions|labelSyntaxRef" msgid "Reference syntax for string reference:" msgstr "字串參照的參照語法：" #. MskRi -#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:143 +#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:139 msgctxt "formulacalculationoptions|comboSyntaxRef" msgid "Use formula syntax" msgstr "使用公式語法" #. Gd4ne -#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:160 +#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:156 msgctxt "formulacalculationoptions|comboConversion" msgid "Generate #VALUE! error" msgstr "產生 #VALUE! 錯誤" #. evLpG -#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:161 +#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:157 msgctxt "formulacalculationoptions|comboConversion" msgid "Treat as zero" msgstr "視為零" #. 83cwa -#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:162 +#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:158 msgctxt "formulacalculationoptions|comboConversion" msgid "Convert only if unambiguous" msgstr "僅轉換明確項目" #. da7wL -#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:163 +#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:159 msgctxt "formulacalculationoptions|comboConversion" msgid "Convert also locale dependent" msgstr "也轉換地區語言相關的項目" #. F7tji -#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:173 +#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:169 msgctxt "formulacalculationoptions|current_doc" msgid "Apply those settings to current document only" msgstr "那些設定值僅套用於目前的文件" #. QyUVP -#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:195 +#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:189 msgctxt "formulacalculationoptions|label3" msgid "Contents to Numbers" msgstr "內容轉數字" #. FY66D -#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:220 +#: sc/uiconfig/scalc/ui/formulacalculationoptions.ui:214 msgctxt "extended_tip|FormulaCalculationOptions" msgid "Sets the rules for conversion from strings values to numeric values, string values to cell references, and strings values to date and time values. This affects built-in functions such as INDIRECT that takes a reference as a string value or date and time functions that takes arguments as string values in local or ISO 8601 formats." msgstr "" @@ -22740,73 +22823,73 @@ msgid "Fourier Analysis" msgstr "傅立葉分析" #. XddnU -#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:108 +#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:104 msgctxt "fourieranalysisdialog|input-range-label" msgid "Input range:" msgstr "輸入範圍：" #. ZkLNa -#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:147 +#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:143 msgctxt "fourieranalysisdialog|output-range-label" msgid "Results to:" msgstr "結果為：" #. rk4DG -#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:184 +#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:180 msgctxt "fourieranalysisdialog|withlabels-check" msgid "Input range has label" msgstr "輸入範圍有標籤" #. QF9sz -#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:208 +#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:202 msgctxt "fourieranalysisdialog|label1" msgid "Data" msgstr "資料" #. zDdDi -#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:244 +#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:234 msgctxt "fourieranalysisdialog|groupedby-columns-radio" msgid "_Columns" msgstr "欄(_C)" #. HJc6Q -#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:260 +#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:250 msgctxt "fourieranalysisdialog|groupedby-rows-radio" msgid "_Rows" msgstr "列(_R)" #. 78Cai -#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:282 +#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:270 msgctxt "fourieranalysisdialog|label2" msgid "Grouped by" msgstr "分組依據" #. dqC28 -#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:314 +#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:298 msgctxt "fourieranalysisdialog|inverse-check" msgid "Inverse" msgstr "反轉" #. ELiT5 -#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:330 +#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:314 msgctxt "fourieranalysisdialog|polar-check" msgid "Output in polar form" msgstr "以極座標形式輸出" #. Trwum -#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:351 +#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:335 msgctxt "fourieranalysisdialog|label4" msgid "Minimum magnitude for polar form output (in dB)" msgstr "極座標形式輸出的最小振幅 (單位為 dB)" #. 9MVfz -#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:385 +#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:367 msgctxt "fourieranalysisdialog|label3" msgid "Options" msgstr "選項" #. CAw2k -#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:422 +#: sc/uiconfig/scalc/ui/fourieranalysisdialog.ui:404 msgctxt "fourieranalysisdialog|extended_tip|FourierAnalysisDialog" msgid "Produces the Fourier analysis of a data set by computing the Discrete Fourier Transform (DFT) of an input array of complex numbers using a couple of Fast Fourier Transform (FFT) algorithms." msgstr "" @@ -22932,61 +23015,61 @@ msgid "Saves all changes and closes dialog." msgstr "" #. qJ3YX -#: sc/uiconfig/scalc/ui/goalseekdlg.ui:110 +#: sc/uiconfig/scalc/ui/goalseekdlg.ui:105 msgctxt "goalseekdlg|formulatext" msgid "_Formula cell:" msgstr "公式儲存格(_F)：" #. t8oEF -#: sc/uiconfig/scalc/ui/goalseekdlg.ui:123 +#: sc/uiconfig/scalc/ui/goalseekdlg.ui:118 msgctxt "goalseekdlg|label3" msgid "Target _value:" msgstr "目標值(_V)：" #. ffY7i -#: sc/uiconfig/scalc/ui/goalseekdlg.ui:136 +#: sc/uiconfig/scalc/ui/goalseekdlg.ui:131 msgctxt "goalseekdlg|vartext" msgid "Variable _cell:" msgstr "變數儲存格(_C)：" #. gA4H9 -#: sc/uiconfig/scalc/ui/goalseekdlg.ui:154 +#: sc/uiconfig/scalc/ui/goalseekdlg.ui:149 msgctxt "goalseekdlg|extended_tip|formulaedit" msgid "In the formula cell, enter the reference of the cell which contains the formula. It contains the current cell reference." msgstr "在公式儲存格中，輸入包含公式儲存格的參照。它包含目前儲存格參照。" #. Fy8Wx -#: sc/uiconfig/scalc/ui/goalseekdlg.ui:172 +#: sc/uiconfig/scalc/ui/goalseekdlg.ui:167 msgctxt "goalseekdlg|extended_tip|target" msgid "Specifies the value you want to achieve as a new result." msgstr "指定要達到的目標作為新結果。" #. BvREA -#: sc/uiconfig/scalc/ui/goalseekdlg.ui:190 +#: sc/uiconfig/scalc/ui/goalseekdlg.ui:185 msgctxt "goalseekdlg|extended_tip|varedit" msgid "Specifies the reference for the cell that contains the value you want to adjust in order to reach the target." msgstr "為一個儲存格指定參照，該儲存格包含將要調整以符合目標的數值。" #. hVQYj -#: sc/uiconfig/scalc/ui/goalseekdlg.ui:206 +#: sc/uiconfig/scalc/ui/goalseekdlg.ui:201 msgctxt "goalseekdlg|extended_tip|formulabutton" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. phzQE -#: sc/uiconfig/scalc/ui/goalseekdlg.ui:222 +#: sc/uiconfig/scalc/ui/goalseekdlg.ui:217 msgctxt "goalseekdlg|extended_tip|varbutton" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. mHUzW -#: sc/uiconfig/scalc/ui/goalseekdlg.ui:242 +#: sc/uiconfig/scalc/ui/goalseekdlg.ui:235 msgctxt "goalseekdlg|label1" msgid "Default Settings" msgstr "預設設定" #. Aguih -#: sc/uiconfig/scalc/ui/goalseekdlg.ui:267 +#: sc/uiconfig/scalc/ui/goalseekdlg.ui:260 msgctxt "goalseekdlg|extended_tip|GoalSeekDialog" msgid "Opens a dialog where you can solve an equation with a variable." msgstr "開啟您可以解答具有變數方程式的對話方塊。" @@ -22998,55 +23081,55 @@ msgid "Grouping" msgstr "群組" #. 64CQA -#: sc/uiconfig/scalc/ui/groupbydate.ui:126 +#: sc/uiconfig/scalc/ui/groupbydate.ui:122 msgctxt "groupbydate|auto_start" msgid "_Automatically" msgstr "自動(_A)" #. u9esd -#: sc/uiconfig/scalc/ui/groupbydate.ui:142 +#: sc/uiconfig/scalc/ui/groupbydate.ui:138 msgctxt "groupbydate|manual_start" msgid "_Manually at:" msgstr "手動指定為(_M)：" #. uLqPc -#: sc/uiconfig/scalc/ui/groupbydate.ui:183 +#: sc/uiconfig/scalc/ui/groupbydate.ui:177 msgctxt "groupbydate|label1" msgid "Start" msgstr "起頭" #. F9Q6s -#: sc/uiconfig/scalc/ui/groupbydate.ui:219 +#: sc/uiconfig/scalc/ui/groupbydate.ui:209 msgctxt "groupbydate|auto_end" msgid "A_utomatically" msgstr "自動(_U)" #. c77d8 -#: sc/uiconfig/scalc/ui/groupbydate.ui:235 +#: sc/uiconfig/scalc/ui/groupbydate.ui:225 msgctxt "groupbydate|manual_end" msgid "Ma_nually at:" msgstr "手動指定為(_N)：" #. 7atAW -#: sc/uiconfig/scalc/ui/groupbydate.ui:277 +#: sc/uiconfig/scalc/ui/groupbydate.ui:265 msgctxt "groupbydate|label2" msgid "End" msgstr "結尾" #. PbDbU -#: sc/uiconfig/scalc/ui/groupbydate.ui:317 +#: sc/uiconfig/scalc/ui/groupbydate.ui:299 msgctxt "groupbydate|days" msgid "Number of _days:" msgstr "天數(_D)：" #. GGREf -#: sc/uiconfig/scalc/ui/groupbydate.ui:336 +#: sc/uiconfig/scalc/ui/groupbydate.ui:318 msgctxt "groupbydate|intervals" msgid "_Intervals:" msgstr "間隔(_I)：" #. aQKHp -#: sc/uiconfig/scalc/ui/groupbydate.ui:436 +#: sc/uiconfig/scalc/ui/groupbydate.ui:416 msgctxt "groupbydate|label3" msgid "Group by" msgstr "群組依據" @@ -23058,43 +23141,43 @@ msgid "Grouping" msgstr "群組" #. G8xYZ -#: sc/uiconfig/scalc/ui/groupbynumber.ui:108 +#: sc/uiconfig/scalc/ui/groupbynumber.ui:104 msgctxt "groupbynumber|auto_start" msgid "_Automatically" msgstr "自動(_A)" #. nbnZC -#: sc/uiconfig/scalc/ui/groupbynumber.ui:124 +#: sc/uiconfig/scalc/ui/groupbynumber.ui:120 msgctxt "groupbynumber|manual_start" msgid "_Manually at:" msgstr "手動指定為(_M)：" #. Dr8cH -#: sc/uiconfig/scalc/ui/groupbynumber.ui:167 +#: sc/uiconfig/scalc/ui/groupbynumber.ui:161 msgctxt "groupbynumber|label1" msgid "Start" msgstr "起頭" #. qeqHX -#: sc/uiconfig/scalc/ui/groupbynumber.ui:203 +#: sc/uiconfig/scalc/ui/groupbynumber.ui:193 msgctxt "groupbynumber|auto_end" msgid "A_utomatically" msgstr "自動(_U)" #. qdFNk -#: sc/uiconfig/scalc/ui/groupbynumber.ui:219 +#: sc/uiconfig/scalc/ui/groupbynumber.ui:209 msgctxt "groupbynumber|manual_end" msgid "Ma_nually at:" msgstr "手動指定(_N)：" #. 3Fakb -#: sc/uiconfig/scalc/ui/groupbynumber.ui:261 +#: sc/uiconfig/scalc/ui/groupbynumber.ui:249 msgctxt "groupbynumber|label2" msgid "End" msgstr "結尾" #. eiDfv -#: sc/uiconfig/scalc/ui/groupbynumber.ui:299 +#: sc/uiconfig/scalc/ui/groupbynumber.ui:281 msgctxt "groupbynumber|label3" msgid "Group by" msgstr "群組依據" @@ -23106,19 +23189,19 @@ msgid "Group" msgstr "群組" #. q2TFi -#: sc/uiconfig/scalc/ui/groupdialog.ui:99 +#: sc/uiconfig/scalc/ui/groupdialog.ui:95 msgctxt "groupdialog|rows" msgid "_Rows" msgstr "列(_R)" #. MFqB6 -#: sc/uiconfig/scalc/ui/groupdialog.ui:116 +#: sc/uiconfig/scalc/ui/groupdialog.ui:112 msgctxt "groupdialog|cols" msgid "_Columns" msgstr "欄(_C)" #. EAEmh -#: sc/uiconfig/scalc/ui/groupdialog.ui:140 +#: sc/uiconfig/scalc/ui/groupdialog.ui:134 msgctxt "groupdialog|includeLabel" msgid "Include" msgstr "包括" @@ -23310,61 +23393,61 @@ msgid "Select a predefined header or footer from the list." msgstr "從清單選取預先定義的頁首或頁尾。" #. 2TJzJ -#: sc/uiconfig/scalc/ui/headerfootercontent.ui:494 +#: sc/uiconfig/scalc/ui/headerfootercontent.ui:488 msgctxt "headerfootercontent|label2" msgid "Use the buttons to change the font or insert field commands such as date, time, etc." msgstr "請按一下這個按鈕來變更字型或插入日期、時間等欄位指令。" #. WBsTf -#: sc/uiconfig/scalc/ui/headerfootercontent.ui:503 +#: sc/uiconfig/scalc/ui/headerfootercontent.ui:497 msgctxt "headerfootercontent|label1" msgid "Note" msgstr "備註" #. X2HEK -#: sc/uiconfig/scalc/ui/headerfootercontent.ui:525 +#: sc/uiconfig/scalc/ui/headerfootercontent.ui:519 msgctxt "headerfootercontent|labelSTR_HF_NONE_IN_BRACKETS" msgid "(none)" msgstr "(無)" #. RSazM -#: sc/uiconfig/scalc/ui/headerfootercontent.ui:537 +#: sc/uiconfig/scalc/ui/headerfootercontent.ui:531 msgctxt "headerfootercontent|labelSTR_PAGE" msgid "Page" msgstr "頁面" #. CMDYZ -#: sc/uiconfig/scalc/ui/headerfootercontent.ui:549 +#: sc/uiconfig/scalc/ui/headerfootercontent.ui:543 msgctxt "headerfootercontent|labelSTR_HF_OF_QUESTION" msgid "of ?" msgstr "之 ?" #. jQyGW -#: sc/uiconfig/scalc/ui/headerfootercontent.ui:561 +#: sc/uiconfig/scalc/ui/headerfootercontent.ui:555 msgctxt "headerfootercontent|labelSTR_HF_CONFIDENTIAL" msgid "Confidential" msgstr "機密" #. EeAAh -#: sc/uiconfig/scalc/ui/headerfootercontent.ui:573 +#: sc/uiconfig/scalc/ui/headerfootercontent.ui:567 msgctxt "headerfootercontent|labelSTR_HF_CREATED_BY" msgid "Created by" msgstr "作者" #. CASF2 -#: sc/uiconfig/scalc/ui/headerfootercontent.ui:585 +#: sc/uiconfig/scalc/ui/headerfootercontent.ui:579 msgctxt "headerfootercontent|labelSTR_HF_CUSTOMIZED" msgid "Customized" msgstr "自訂" #. wZN6q -#: sc/uiconfig/scalc/ui/headerfootercontent.ui:597 +#: sc/uiconfig/scalc/ui/headerfootercontent.ui:591 msgctxt "headerfootercontent|labelSTR_HF_OF" msgid "of" msgstr "的" #. SDx4X -#: sc/uiconfig/scalc/ui/headerfootercontent.ui:614 +#: sc/uiconfig/scalc/ui/headerfootercontent.ui:608 msgctxt "headerfootercontent|extended_tip|HeaderFooterContent" msgid "Defines or formats a header or footer for a Page Style." msgstr "定義或格式化頁面樣式的頁首或頁尾。" @@ -23394,91 +23477,91 @@ msgid "Import File" msgstr "匯入檔案" #. VWcgp -#: sc/uiconfig/scalc/ui/imoptdialog.ui:109 +#: sc/uiconfig/scalc/ui/imoptdialog.ui:105 msgctxt "imoptdialog|charsetft" msgid "_Character set:" msgstr "字元集(_C)：" #. YzedG -#: sc/uiconfig/scalc/ui/imoptdialog.ui:122 +#: sc/uiconfig/scalc/ui/imoptdialog.ui:118 msgctxt "imoptdialog|fieldft" msgid "_Field delimiter:" msgstr "欄位分隔符(_F)：" #. bhjBy -#: sc/uiconfig/scalc/ui/imoptdialog.ui:136 +#: sc/uiconfig/scalc/ui/imoptdialog.ui:132 msgctxt "imoptdialog|textft" msgid "Strin_g delimiter:" msgstr "字串分隔符(_G)：" #. Ed9o4 -#: sc/uiconfig/scalc/ui/imoptdialog.ui:148 +#: sc/uiconfig/scalc/ui/imoptdialog.ui:144 msgctxt "imoptdialog|asshown" msgid "Save cell content as _shown" msgstr "儲存所示儲存格內容(_S)" #. kWBhB -#: sc/uiconfig/scalc/ui/imoptdialog.ui:157 +#: sc/uiconfig/scalc/ui/imoptdialog.ui:153 msgctxt "imoptdialog|extended_tip|asshown" msgid "Enabled by default, data will be saved as displayed, including applied number formats. If this checkbox is not marked, raw data content will be saved, as in older versions of the software." msgstr "預設為啟用，會如其所示儲存資料，包含套用的數字格式。如果未標記此核取方塊，則會如同舊版軟體儲存原始資料內容。" #. Fn8ts -#: sc/uiconfig/scalc/ui/imoptdialog.ui:169 +#: sc/uiconfig/scalc/ui/imoptdialog.ui:165 msgctxt "imoptdialog|formulas" msgid "Save cell fo_rmulas instead of calculated values" msgstr "將儲存格的公式儲存起來，而不是計算出數值(_R)" #. DAEFJ -#: sc/uiconfig/scalc/ui/imoptdialog.ui:185 +#: sc/uiconfig/scalc/ui/imoptdialog.ui:181 msgctxt "imoptdialog|quoteall" msgid "_Quote all text cells" msgstr "括住所有文字儲存格(_Q)" #. vboDu -#: sc/uiconfig/scalc/ui/imoptdialog.ui:194 +#: sc/uiconfig/scalc/ui/imoptdialog.ui:190 msgctxt "imoptdialog|extended_tip|quoteall" msgid "Exports all text cells with leading and trailing quote characters as set in the Text delimiter box. If not checked, only those text cells get quoted that contain the Field delimiter character." msgstr "" #. KGh9G -#: sc/uiconfig/scalc/ui/imoptdialog.ui:206 +#: sc/uiconfig/scalc/ui/imoptdialog.ui:202 msgctxt "imoptdialog|fixedwidth" msgid "Fixed column _width" msgstr "固定的欄寬(_W)" #. TfB45 -#: sc/uiconfig/scalc/ui/imoptdialog.ui:215 +#: sc/uiconfig/scalc/ui/imoptdialog.ui:211 msgctxt "imoptdialog|extended_tip|fixedwidth" msgid "Exports all data fields with a fixed width." msgstr "以固定寬度匯出所有資料欄位。" #. 6JaYQ -#: sc/uiconfig/scalc/ui/imoptdialog.ui:238 +#: sc/uiconfig/scalc/ui/imoptdialog.ui:234 msgctxt "imoptdialog|extended_tip|field" msgid "Choose or enter the field delimiter, which separates data fields." msgstr "選擇或輸入分隔資料欄位的欄位分隔符。" #. hRECE -#: sc/uiconfig/scalc/ui/imoptdialog.ui:260 +#: sc/uiconfig/scalc/ui/imoptdialog.ui:256 msgctxt "imoptdialog|extended_tip|text" msgid "Choose or enter the text delimiter, which encloses every data field." msgstr "選擇或輸入文字分隔符，此分隔符會將括起每個資料欄位。" #. D2hqs -#: sc/uiconfig/scalc/ui/imoptdialog.ui:282 +#: sc/uiconfig/scalc/ui/imoptdialog.ui:278 msgctxt "imoptdialog|extended_tip|charsetdropdown" msgid "Specifies the character set for text export." msgstr "指定文字匯出的字元集。" #. B8Jst -#: sc/uiconfig/scalc/ui/imoptdialog.ui:327 +#: sc/uiconfig/scalc/ui/imoptdialog.ui:323 msgctxt "imoptdialog|extended_tip|charsetlist" msgid "Select the character set from the options used for import/export." msgstr "從選項中選取匯入/匯出要使用的字元集。" #. euP6n -#: sc/uiconfig/scalc/ui/imoptdialog.ui:352 +#: sc/uiconfig/scalc/ui/imoptdialog.ui:346 msgctxt "imoptdialog|label" msgid "Field Options" msgstr "欄位選項" @@ -23502,61 +23585,61 @@ msgid "Insert Cells" msgstr "插入儲存格" #. ewgTB -#: sc/uiconfig/scalc/ui/insertcells.ui:96 +#: sc/uiconfig/scalc/ui/insertcells.ui:92 msgctxt "insertcells|down" msgid "Shift cells _down" msgstr "下移儲存格(_D)" #. FA4mZ -#: sc/uiconfig/scalc/ui/insertcells.ui:106 +#: sc/uiconfig/scalc/ui/insertcells.ui:102 msgctxt "insertcells|extended_tip|down" msgid "Moves the contents of the selected range downward when cells are inserted." msgstr "插入儲存格時，所選範圍的內容向下移動。" #. FnbEo -#: sc/uiconfig/scalc/ui/insertcells.ui:118 +#: sc/uiconfig/scalc/ui/insertcells.ui:114 msgctxt "insertcells|right" msgid "Shift cells _right" msgstr "右移儲存格(_R)" #. 9UVgc -#: sc/uiconfig/scalc/ui/insertcells.ui:128 +#: sc/uiconfig/scalc/ui/insertcells.ui:124 msgctxt "insertcells|extended_tip|right" msgid "Moves the contents of the selected range to the right when cells are inserted." msgstr "插入儲存格時，所選範圍的內容向右移動。" #. V4zVH -#: sc/uiconfig/scalc/ui/insertcells.ui:140 +#: sc/uiconfig/scalc/ui/insertcells.ui:136 msgctxt "insertcells|rows" msgid "Entire ro_w" msgstr "整列(_W)" #. GZc24 -#: sc/uiconfig/scalc/ui/insertcells.ui:150 +#: sc/uiconfig/scalc/ui/insertcells.ui:146 msgctxt "insertcells|extended_tip|rows" msgid "Inserts an entire row. The position of the row is determined by the selection on the sheet." msgstr "插入整列。此列的位置取決於試算表中的選擇。" #. 6UZ5M -#: sc/uiconfig/scalc/ui/insertcells.ui:162 +#: sc/uiconfig/scalc/ui/insertcells.ui:158 msgctxt "insertcells|cols" msgid "Entire _column" msgstr "整欄(_C)" #. oXcQW -#: sc/uiconfig/scalc/ui/insertcells.ui:172 +#: sc/uiconfig/scalc/ui/insertcells.ui:168 msgctxt "insertcells|extended_tip|cols" msgid "Inserts an entire column. The number of columns to be inserted is determined by the selected number of columns." msgstr "插入整欄。插入的欄數取決於選取的欄數。" #. GkQo9 -#: sc/uiconfig/scalc/ui/insertcells.ui:190 +#: sc/uiconfig/scalc/ui/insertcells.ui:184 msgctxt "insertcells|label1" msgid "Selection" msgstr "選取內容" #. g2sxi -#: sc/uiconfig/scalc/ui/insertcells.ui:215 +#: sc/uiconfig/scalc/ui/insertcells.ui:209 msgctxt "insertcells|extended_tip|InsertCellsDialog" msgid "Opens the Insert Cells dialog, in which you can insert new cells according to the options that you specify." msgstr "開啟 [插入儲存格] 對話方塊，您可以在此處根據指定的選項插入新的儲存格。" @@ -23579,6 +23662,12 @@ msgctxt "insertname|extended_tip|pasteall" msgid "Inserts a list of all named areas and the corresponding cell references at the current cursor position." msgstr "" +#. ANtsf +#: sc/uiconfig/scalc/ui/insertname.ui:70 +msgctxt "insertname|paste" +msgid "_Paste" +msgstr "" + #. TNPzH #: sc/uiconfig/scalc/ui/insertname.ui:79 msgctxt "insertname|extended_tip|paste" @@ -23622,133 +23711,133 @@ msgid "Insert Sheet" msgstr "插入工作表" #. kE6pE -#: sc/uiconfig/scalc/ui/insertsheet.ui:117 +#: sc/uiconfig/scalc/ui/insertsheet.ui:113 msgctxt "insertsheet|before" msgid "B_efore current sheet" msgstr "在目前的工作表之前(_E)" #. YRB9E -#: sc/uiconfig/scalc/ui/insertsheet.ui:127 +#: sc/uiconfig/scalc/ui/insertsheet.ui:123 msgctxt "insertsheet|extended_tip|before" msgid "Inserts a new sheet directly before the current sheet." msgstr "直接在目前的試算表前插入新的試算表。" #. Y56sT -#: sc/uiconfig/scalc/ui/insertsheet.ui:139 +#: sc/uiconfig/scalc/ui/insertsheet.ui:135 msgctxt "insertsheet|after" msgid "_After current sheet" msgstr "在目前的工作表之後(_A)" #. uiKdA -#: sc/uiconfig/scalc/ui/insertsheet.ui:149 +#: sc/uiconfig/scalc/ui/insertsheet.ui:145 msgctxt "insertsheet|extended_tip|after" msgid "Inserts a new sheet directly after the current sheet." msgstr "直接在目前的試算表後插入新的試算表。" #. P8n4C -#: sc/uiconfig/scalc/ui/insertsheet.ui:167 +#: sc/uiconfig/scalc/ui/insertsheet.ui:161 msgctxt "insertsheet|label1" msgid "Position" msgstr "位置" #. TumvT -#: sc/uiconfig/scalc/ui/insertsheet.ui:213 +#: sc/uiconfig/scalc/ui/insertsheet.ui:201 msgctxt "insertsheet|new" msgid "_New sheet" msgstr "新增工作表(_N)" #. CyX37 -#: sc/uiconfig/scalc/ui/insertsheet.ui:223 +#: sc/uiconfig/scalc/ui/insertsheet.ui:211 msgctxt "insertsheet|extended_tip|new" msgid "Creates a new sheet. Enter a sheet name in the Name field. Allowed characters are letters, numbers, spaces, and the underline character." msgstr "建立新試算表。在 [名稱] 欄位中輸入試算表名稱。允許的字元為字母、數字、空格與底線字元。" #. whnDy -#: sc/uiconfig/scalc/ui/insertsheet.ui:251 +#: sc/uiconfig/scalc/ui/insertsheet.ui:234 msgctxt "insertsheet|countft" msgid "N_o. of sheets:" msgstr "工作表數(_O)：" #. xnBgf -#: sc/uiconfig/scalc/ui/insertsheet.ui:265 +#: sc/uiconfig/scalc/ui/insertsheet.ui:248 msgctxt "insertsheet|nameft" msgid "Na_me:" msgstr "名稱(_M)：" #. JqDES -#: sc/uiconfig/scalc/ui/insertsheet.ui:284 +#: sc/uiconfig/scalc/ui/insertsheet.ui:267 msgctxt "insertsheet|extended_tip|countnf" msgid "Specifies the number of sheets to be created." msgstr "指定要建立的試算表數量。" #. dxNfa -#: sc/uiconfig/scalc/ui/insertsheet.ui:300 +#: sc/uiconfig/scalc/ui/insertsheet.ui:283 msgctxt "insertsheet|nameed" msgid "Sheet..." msgstr "工作表..." #. ckSEX -#: sc/uiconfig/scalc/ui/insertsheet.ui:303 +#: sc/uiconfig/scalc/ui/insertsheet.ui:286 msgctxt "insertsheet|extended_tip|nameed" msgid "Specifies the name of the new sheet." msgstr "指定新工作表的名稱。" #. NmbDF -#: sc/uiconfig/scalc/ui/insertsheet.ui:338 +#: sc/uiconfig/scalc/ui/insertsheet.ui:319 msgctxt "insertsheet|fromfile" msgid "_From file" msgstr "取自檔案(_F)" #. j9uBX -#: sc/uiconfig/scalc/ui/insertsheet.ui:348 +#: sc/uiconfig/scalc/ui/insertsheet.ui:329 msgctxt "insertsheet|extended_tip|fromfile" msgid "Inserts a sheet from an existing file into the current document." msgstr "將現有檔案的試算表插入目前的文件中。" #. FzMAv -#: sc/uiconfig/scalc/ui/insertsheet.ui:417 +#: sc/uiconfig/scalc/ui/insertsheet.ui:394 msgctxt "insertsheet|tables-atkobject" msgid "Tables in file" msgstr "檔案中的表格" #. P4xGn -#: sc/uiconfig/scalc/ui/insertsheet.ui:418 +#: sc/uiconfig/scalc/ui/insertsheet.ui:395 msgctxt "insertsheet|extended_tip|tables" msgid "If you selected a file by using the Browse button, the sheets contained in it are displayed in the list box. The file path is displayed below this box. Select the sheet to be inserted from the list box." msgstr "如果您使用 [瀏覽] 按鈕選取檔案，則此檔案所包含的試算表即會顯示在清單方塊中。檔案路徑會顯示在此方塊的下方。從清單方塊中選取要插入的試算表。" #. mGqDq -#: sc/uiconfig/scalc/ui/insertsheet.ui:437 +#: sc/uiconfig/scalc/ui/insertsheet.ui:414 msgctxt "insertsheet|browse" msgid "_Browse..." msgstr "瀏覽(_B)..." #. LnzZX -#: sc/uiconfig/scalc/ui/insertsheet.ui:444 +#: sc/uiconfig/scalc/ui/insertsheet.ui:421 msgctxt "insertsheet|extended_tip|browse" msgid "Opens a dialog for selecting a file." msgstr "開啟對話方塊以選取檔案。" #. LvF7e -#: sc/uiconfig/scalc/ui/insertsheet.ui:455 +#: sc/uiconfig/scalc/ui/insertsheet.ui:432 msgctxt "insertsheet|link" msgid "Lin_k" msgstr "連結(_K)" #. 5skfF -#: sc/uiconfig/scalc/ui/insertsheet.ui:466 +#: sc/uiconfig/scalc/ui/insertsheet.ui:443 msgctxt "insertsheet|extended_tip|link" msgid "Select to insert the sheet as a link instead as a copy. The links can be updated to show the current contents." msgstr "選取將試算表插入為連結，而不是插入為副本。可以更新這些連結，以顯示目前的內容。" #. SYZFG -#: sc/uiconfig/scalc/ui/insertsheet.ui:505 +#: sc/uiconfig/scalc/ui/insertsheet.ui:478 msgctxt "insertsheet|label2" msgid "Sheet" msgstr "工作表" #. 9MBZH -#: sc/uiconfig/scalc/ui/insertsheet.ui:537 +#: sc/uiconfig/scalc/ui/insertsheet.ui:510 msgctxt "insertsheet|extended_tip|InsertSheetDialog" msgid "Defines the options to be used to insert a new sheet." msgstr "定義要用來插入新工作表的選項。" @@ -23760,7 +23849,7 @@ msgid "Edit Setting" msgstr "編輯設定" #. hCsQF -#: sc/uiconfig/scalc/ui/integerdialog.ui:122 +#: sc/uiconfig/scalc/ui/integerdialog.ui:116 msgctxt "integerdialog|extended_tip|IntegerDialog" msgid "Enter or change the value of the selected setting." msgstr "" @@ -23880,85 +23969,85 @@ msgid "Enter the name of the area for which you want to define a reference or a msgstr "" #. dGcEm -#: sc/uiconfig/scalc/ui/managenamesdialog.ui:363 +#: sc/uiconfig/scalc/ui/managenamesdialog.ui:359 msgctxt "managenamesdialog|printrange" msgid "_Print range" msgstr "列印範圍(_P)" #. GEWKN -#: sc/uiconfig/scalc/ui/managenamesdialog.ui:372 +#: sc/uiconfig/scalc/ui/managenamesdialog.ui:368 msgctxt "managenamesdialog|extended_tip|printrange" msgid "Defines the area as a print range." msgstr "" #. EjtHY -#: sc/uiconfig/scalc/ui/managenamesdialog.ui:383 +#: sc/uiconfig/scalc/ui/managenamesdialog.ui:379 msgctxt "managenamesdialog|filter" msgid "_Filter" msgstr "篩選(_F)" #. DoQMz -#: sc/uiconfig/scalc/ui/managenamesdialog.ui:392 +#: sc/uiconfig/scalc/ui/managenamesdialog.ui:388 msgctxt "managenamesdialog|extended_tip|filter" msgid "Defines the selected area to be used in an advanced filter." msgstr "" #. UdLJc -#: sc/uiconfig/scalc/ui/managenamesdialog.ui:403 +#: sc/uiconfig/scalc/ui/managenamesdialog.ui:399 msgctxt "managenamesdialog|colheader" msgid "Repeat _column" msgstr "重複欄(_C)" #. oipaa -#: sc/uiconfig/scalc/ui/managenamesdialog.ui:412 +#: sc/uiconfig/scalc/ui/managenamesdialog.ui:408 msgctxt "managenamesdialog|extended_tip|colheader" msgid "Defines the area as a repeating column." msgstr "" #. c3b8v -#: sc/uiconfig/scalc/ui/managenamesdialog.ui:423 +#: sc/uiconfig/scalc/ui/managenamesdialog.ui:419 msgctxt "managenamesdialog|rowheader" msgid "Repeat _row" msgstr "重複列(_R)" #. RbPrc -#: sc/uiconfig/scalc/ui/managenamesdialog.ui:432 +#: sc/uiconfig/scalc/ui/managenamesdialog.ui:428 msgctxt "managenamesdialog|extended_tip|rowheader" msgid "Defines the area as a repeating row." msgstr "" #. Rujwh -#: sc/uiconfig/scalc/ui/managenamesdialog.ui:449 +#: sc/uiconfig/scalc/ui/managenamesdialog.ui:443 msgctxt "managenamesdialog|label1" msgid "Range _Options" msgstr "範圍選項(_O)" #. MFz5S -#: sc/uiconfig/scalc/ui/managenamesdialog.ui:455 +#: sc/uiconfig/scalc/ui/managenamesdialog.ui:449 msgctxt "managenamesdialog|extended_tip|more" msgid "Allows you to specify the Area type (optional) for the reference." msgstr "" #. vVAh3 -#: sc/uiconfig/scalc/ui/managenamesdialog.ui:480 +#: sc/uiconfig/scalc/ui/managenamesdialog.ui:474 msgctxt "managenamesdialog|extended_tip|add" msgid "Click the Add button to add a new defined name." msgstr "" #. MBAnE -#: sc/uiconfig/scalc/ui/managenamesdialog.ui:499 +#: sc/uiconfig/scalc/ui/managenamesdialog.ui:493 msgctxt "managenamesdialog|extended_tip|delete" msgid "Deletes the selected element or elements without requiring confirmation." msgstr "刪除一或多個選取的元素時不需要確認。" #. j3EMw -#: sc/uiconfig/scalc/ui/managenamesdialog.ui:535 +#: sc/uiconfig/scalc/ui/managenamesdialog.ui:529 msgctxt "managenamesdialog|extended_tip|ManageNamesDialog" msgid "Opens a dialog where you can specify a name for a selected area or a name for a formula expression." msgstr "" #. 96fTt -#: sc/uiconfig/scalc/ui/managenamesdialog.ui:540 +#: sc/uiconfig/scalc/ui/managenamesdialog.ui:534 msgctxt "managenamesdialog|treeviewcolumn1" msgid "column" msgstr "欄" @@ -24030,97 +24119,97 @@ msgid "Move/Copy Sheet" msgstr "移動/複製工作表" #. iJZov -#: sc/uiconfig/scalc/ui/movecopysheet.ui:99 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:95 msgctxt "movecopysheet|move" msgid "_Move" msgstr "移動(_M)" #. zRtFK -#: sc/uiconfig/scalc/ui/movecopysheet.ui:117 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:113 msgctxt "movecopysheet|copy" msgid "C_opy" msgstr "複製(_O)" #. GPAxW -#: sc/uiconfig/scalc/ui/movecopysheet.ui:128 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:124 msgctxt "movecopysheet|extended_tip|copy" msgid "Specifies that the sheet is to be copied. If the option is unmarked, the sheet is moved." msgstr "指定將複製試算表。如果未標記此選項，則試算表將會移動。" #. Cf9Po -#: sc/uiconfig/scalc/ui/movecopysheet.ui:147 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:140 msgctxt "movecopysheet|label1" msgid "Action" msgstr "動作" #. ENjjq -#: sc/uiconfig/scalc/ui/movecopysheet.ui:195 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:182 msgctxt "movecopysheet|toDocumentLabel" msgid "To _document" msgstr "到文件(_D)" #. jfC53 -#: sc/uiconfig/scalc/ui/movecopysheet.ui:212 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:199 msgctxt "movecopysheet|toDocument" msgid "(current document)" msgstr "(目前的文件)" #. Kd5nz -#: sc/uiconfig/scalc/ui/movecopysheet.ui:213 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:200 msgctxt "movecopysheet|toDocument" msgid "- new document -" msgstr "- 新增文件 -" #. UDmM5 -#: sc/uiconfig/scalc/ui/movecopysheet.ui:217 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:204 msgctxt "movecopysheet|extended_tip|toDocument" msgid "Indicates where the current sheet is to be moved or copied to." msgstr "指示目前試算表所要移動或複製到的位置。" #. DGcVf -#: sc/uiconfig/scalc/ui/movecopysheet.ui:246 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:233 msgctxt "movecopysheet|insertBeforeLabel" msgid "_Insert before" msgstr "前置於(_I)" #. 8C2Bk -#: sc/uiconfig/scalc/ui/movecopysheet.ui:290 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:277 msgctxt "movecopysheet|extended_tip|insertBefore" msgid "The current sheet is moved or copied in front of the selected sheet." msgstr "目前的試算表會移動或複製到所選試算表之前。" #. gE92w -#: sc/uiconfig/scalc/ui/movecopysheet.ui:317 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:302 msgctxt "movecopysheet|label2" msgid "Location" msgstr "位置" #. wcXYj -#: sc/uiconfig/scalc/ui/movecopysheet.ui:384 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:365 msgctxt "movecopysheet|warnunused" msgid "This name is already used." msgstr "這個名稱已被使用。" #. L7CQf -#: sc/uiconfig/scalc/ui/movecopysheet.ui:399 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:380 msgctxt "movecopysheet|warnempty" msgid "Name is empty." msgstr "名稱為空白。" #. xoYVT -#: sc/uiconfig/scalc/ui/movecopysheet.ui:414 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:395 msgctxt "movecopysheet|warninvalid" msgid "Name contains one or more invalid characters." msgstr "名稱含有一個或多個無效字元。" #. zE3yH -#: sc/uiconfig/scalc/ui/movecopysheet.ui:441 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:419 msgctxt "movecopysheet|newNameLabel" msgid "New _name" msgstr "新名稱(_N)" #. qqKL9 -#: sc/uiconfig/scalc/ui/movecopysheet.ui:467 +#: sc/uiconfig/scalc/ui/movecopysheet.ui:445 msgctxt "movecopysheet|extended_tip|MoveCopySheetDialog" msgid "Moves or copies a sheet to a new location in the document or to a different document." msgstr "將試算表移動或複製到文件中的新位置或者到不同文件中。" @@ -24132,61 +24221,61 @@ msgid "Moving Average" msgstr "移動平均" #. LJ63y -#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:108 +#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:104 msgctxt "movingaveragedialog|input-range-label" msgid "Input range:" msgstr "輸入範圍：" #. J2nco -#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:147 +#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:143 msgctxt "movingaveragedialog|output-range-label" msgid "Results to:" msgstr "結果為：" #. vJXCf -#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:184 +#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:180 msgctxt "movingaveragedialog|trimrange-check" msgid "Trim input range to actual data content" msgstr "將輸入範圍裁縮為實際資料內容範圍" #. eTxm6 -#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:208 +#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:202 msgctxt "movingaveragedialog|label3" msgid "Data" msgstr "資料" #. jsyGd -#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:244 +#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:234 msgctxt "movingaveragedialog|groupedby-columns-radio" msgid "Columns" msgstr "欄" #. Ek9BV -#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:260 +#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:250 msgctxt "movingaveragedialog|groupedby-rows-radio" msgid "Rows" msgstr "列" #. QzpE8 -#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:282 +#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:270 msgctxt "movingaveragedialog|label2" msgid "Grouped by" msgstr "分組依據" #. ZFgCx -#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:320 +#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:304 msgctxt "movingaveragedialog|interval-label" msgid "Interval:" msgstr "間隔：" #. CT4kZ -#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:351 +#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:333 msgctxt "movingaveragedialog|label1" msgid "Parameters" msgstr "參數" #. Ed3fa -#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:376 +#: sc/uiconfig/scalc/ui/movingaveragedialog.ui:358 msgctxt "movingaveragedialog|extended_tip|MovingAverageDialog" msgid "Calculates the moving average of a time series" msgstr "" @@ -24210,67 +24299,67 @@ msgid "Closes dialog and discards all changes." msgstr "" #. aQNVa -#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:110 +#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:106 msgctxt "multipleoperationsdialog|formulasft" msgid "_Formulas:" msgstr "公式(_F)：" #. ddjsT -#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:124 +#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:120 msgctxt "multipleoperationsdialog|rowft" msgid "_Row input cell:" msgstr "列輸入儲存格(_R)：" #. AELsJ -#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:138 +#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:134 msgctxt "multipleoperationsdialog|colft" msgid "_Column input cell:" msgstr "欄輸入儲存格(_C)：" #. 5RfAg -#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:157 +#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:153 msgctxt "multipleoperationsdialog|extended_tip|formulas" msgid "Enter the cell references for the cells containing the formulas that you want to use in the multiple operation." msgstr "為多重作業中要使用的公式所在之儲存格，輸入儲存格參照。" #. Dcu9R -#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:175 +#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:171 msgctxt "multipleoperationsdialog|extended_tip|row" msgid "Enter the input cell reference that you want to use as a variable for the rows in the data table." msgstr "輸入要用作資料表格中列變數的輸入儲存格參照。" #. E5T7X -#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:193 +#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:189 msgctxt "multipleoperationsdialog|extended_tip|col" msgid "Enter the input cell reference that you want to use as a variable for the columns in the data table." msgstr "輸入要用作資料表格中欄變數的輸入儲存格參照。" #. uQeAG -#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:209 +#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:205 msgctxt "multipleoperationsdialog|extended_tip|formulasref" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. qdF79 -#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:225 +#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:221 msgctxt "multipleoperationsdialog|extended_tip|rowref" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. pzEjo -#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:241 +#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:237 msgctxt "multipleoperationsdialog|extended_tip|colref" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. LqDCg -#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:258 +#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:252 msgctxt "multipleoperationsdialog|label1" msgid "Default Settings" msgstr "預設設定" #. ZQKXx -#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:283 +#: sc/uiconfig/scalc/ui/multipleoperationsdialog.ui:277 msgctxt "multipleoperationsdialog|extended_tip|MultipleOperationsDialog" msgid "Applies the same formula to different cells, but with different parameter values." msgstr "對不同儲存格套用相同公式，但參數值不同。" @@ -24294,85 +24383,85 @@ msgid "Closes dialog and discards all changes." msgstr "" #. 9GqGh -#: sc/uiconfig/scalc/ui/namerangesdialog.ui:136 +#: sc/uiconfig/scalc/ui/namerangesdialog.ui:130 msgctxt "namerangesdialog|extended_tip|edassign" msgid "Displays the cell reference of each label range." msgstr "顯示每個標籤區域的儲存格參照。" #. JXXhm -#: sc/uiconfig/scalc/ui/namerangesdialog.ui:155 +#: sc/uiconfig/scalc/ui/namerangesdialog.ui:149 msgctxt "namerangesdialog|extended_tip|rbassign" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. RHkHY -#: sc/uiconfig/scalc/ui/namerangesdialog.ui:179 +#: sc/uiconfig/scalc/ui/namerangesdialog.ui:173 msgctxt "namerangesdialog|colhead" msgid "Contains _column labels" msgstr "包含欄標籤(_C)" #. LTnyf -#: sc/uiconfig/scalc/ui/namerangesdialog.ui:190 +#: sc/uiconfig/scalc/ui/namerangesdialog.ui:184 msgctxt "namerangesdialog|extended_tip|colhead" msgid "Includes column labels in the current label range." msgstr "將欄標籤包含在目前標籤區域之中。" #. WDLCJ -#: sc/uiconfig/scalc/ui/namerangesdialog.ui:201 +#: sc/uiconfig/scalc/ui/namerangesdialog.ui:195 msgctxt "namerangesdialog|rowhead" msgid "Contains _row labels" msgstr "包含列標籤(_R)" #. bsL9T -#: sc/uiconfig/scalc/ui/namerangesdialog.ui:212 +#: sc/uiconfig/scalc/ui/namerangesdialog.ui:206 msgctxt "namerangesdialog|extended_tip|rowhead" msgid "Includes row labels in the current label range." msgstr "將列標籤包含在目前標籤區域之中。" #. CaLyt -#: sc/uiconfig/scalc/ui/namerangesdialog.ui:231 +#: sc/uiconfig/scalc/ui/namerangesdialog.ui:225 msgctxt "namerangesdialog|datarange" msgid "For _data range" msgstr "目標資料範圍(_D)" #. Lhn9n -#: sc/uiconfig/scalc/ui/namerangesdialog.ui:256 +#: sc/uiconfig/scalc/ui/namerangesdialog.ui:250 msgctxt "namerangesdialog|extended_tip|edassign2" msgid "Sets the data range for which the selected label range is valid. To modify it, click in the sheet and select another range with the mouse." msgstr "設定對選取之貼標範圍有效的資料範圍。若要修改它，請在試算表中按一下並用滑鼠選取其他範圍。" #. PvBUo -#: sc/uiconfig/scalc/ui/namerangesdialog.ui:275 +#: sc/uiconfig/scalc/ui/namerangesdialog.ui:269 msgctxt "namerangesdialog|extended_tip|rbassign2" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. UQwuv -#: sc/uiconfig/scalc/ui/namerangesdialog.ui:306 +#: sc/uiconfig/scalc/ui/namerangesdialog.ui:300 msgctxt "namerangesdialog|extended_tip|add" msgid "Adds the current label range to the list." msgstr "將目前標籤區域加入清單中。" #. ozH98 -#: sc/uiconfig/scalc/ui/namerangesdialog.ui:325 +#: sc/uiconfig/scalc/ui/namerangesdialog.ui:319 msgctxt "namerangesdialog|extended_tip|delete" msgid "Deletes the selected element or elements without requiring confirmation." msgstr "刪除一或多個選取的元素時不需要確認。" #. E2Wk2 -#: sc/uiconfig/scalc/ui/namerangesdialog.ui:377 +#: sc/uiconfig/scalc/ui/namerangesdialog.ui:370 msgctxt "namerangesdialog|extended_tip|range" msgid "Displays the cell reference of each label range." msgstr "顯示每個標籤區域的儲存格參照。" #. AFqD5 -#: sc/uiconfig/scalc/ui/namerangesdialog.ui:396 +#: sc/uiconfig/scalc/ui/namerangesdialog.ui:387 msgctxt "namerangesdialog|label1" msgid "Range" msgstr "範圍" #. aDbLN -#: sc/uiconfig/scalc/ui/namerangesdialog.ui:421 +#: sc/uiconfig/scalc/ui/namerangesdialog.ui:412 msgctxt "namerangesdialog|extended_tip|NameRangesDialog" msgid "Opens a dialog in which you can define a label range." msgstr "開啟一個對話方塊，您可以在其中定義標籤區域。" @@ -24570,921 +24659,921 @@ msgid "No solution was found." msgstr "找不到解決方案。" #. iQSEv -#: sc/uiconfig/scalc/ui/notebookbar.ui:3003 +#: sc/uiconfig/scalc/ui/notebookbar.ui:3010 msgctxt "CalcNotebookbar|FileMenuButton" msgid "_File" msgstr "檔案(_F)" #. wh523 -#: sc/uiconfig/scalc/ui/notebookbar.ui:3023 +#: sc/uiconfig/scalc/ui/notebookbar.ui:3029 msgctxt "CalcNotebookbar|HelpMenuButton" msgid "_Help" msgstr "說明(_H)" #. 3iDW7 -#: sc/uiconfig/scalc/ui/notebookbar.ui:3079 +#: sc/uiconfig/scalc/ui/notebookbar.ui:3084 msgctxt "CalcNotebookbar|FileLabel" msgid "~File" msgstr "檔案(~F)" #. EBQTu -#: sc/uiconfig/scalc/ui/notebookbar.ui:3555 +#: sc/uiconfig/scalc/ui/notebookbar.ui:3560 msgctxt "CalcNotebookbar|bordertype|tooltip_text" msgid "Specify the borders of the selected cells." msgstr "指定選取儲存格的邊框。" #. f8rkJ -#: sc/uiconfig/scalc/ui/notebookbar.ui:3842 +#: sc/uiconfig/scalc/ui/notebookbar.ui:3847 msgctxt "CalcNotebookbar|increaseindent1|tooltip_text" msgid "Increase Indent" msgstr "擴大縮排" #. TBHRy -#: sc/uiconfig/scalc/ui/notebookbar.ui:3856 +#: sc/uiconfig/scalc/ui/notebookbar.ui:3861 msgctxt "CalcNotebookbar|decreaseindent1|tooltip_text" msgid "Decrease Indent" msgstr "減小縮排" #. 6GvMB -#: sc/uiconfig/scalc/ui/notebookbar.ui:4843 +#: sc/uiconfig/scalc/ui/notebookbar.ui:4848 msgctxt "CalcNotebookbar|HomeMenuButton" msgid "_Home" msgstr "常用(_H)" #. 5kZRD -#: sc/uiconfig/scalc/ui/notebookbar.ui:4952 +#: sc/uiconfig/scalc/ui/notebookbar.ui:4957 msgctxt "CalcNotebookbar|HomeLabel" msgid "~Home" msgstr "常用(~H)" #. bBEGh -#: sc/uiconfig/scalc/ui/notebookbar.ui:5511 +#: sc/uiconfig/scalc/ui/notebookbar.ui:5516 msgctxt "CalcNotebookbar|FieldMenuButton" msgid "Fiel_d" msgstr "欄位(_D)" #. VCk9a -#: sc/uiconfig/scalc/ui/notebookbar.ui:6032 +#: sc/uiconfig/scalc/ui/notebookbar.ui:6037 msgctxt "CalcNotebookbar|InsertMenuButton" msgid "_Insert" msgstr "插入(_I)" #. HnjBi -#: sc/uiconfig/scalc/ui/notebookbar.ui:6140 +#: sc/uiconfig/scalc/ui/notebookbar.ui:6145 msgctxt "CalcNotebookbar|InsertLabel" msgid "~Insert" msgstr "插入(~I)" #. xmARL -#: sc/uiconfig/scalc/ui/notebookbar.ui:6551 -#: sc/uiconfig/scalc/ui/notebookbar.ui:6577 -#: sc/uiconfig/scalc/ui/notebookbar.ui:7015 +#: sc/uiconfig/scalc/ui/notebookbar.ui:6556 +#: sc/uiconfig/scalc/ui/notebookbar.ui:6582 +#: sc/uiconfig/scalc/ui/notebookbar.ui:7020 msgctxt "CalcNotebookbar|objectalign|tooltip_text" msgid "Object Align" msgstr "物件對齊" #. vruXQ -#: sc/uiconfig/scalc/ui/notebookbar.ui:7240 +#: sc/uiconfig/scalc/ui/notebookbar.ui:7245 msgctxt "CalcNotebookbar|LayoutMenuButton" msgid "_Layout" msgstr "版面配置(_L)" #. eWinY -#: sc/uiconfig/scalc/ui/notebookbar.ui:7325 +#: sc/uiconfig/scalc/ui/notebookbar.ui:7330 msgctxt "CalcNotebookbar|PageLayoutLabel" msgid "~Layout" msgstr "版面配置(~L)" #. pnWd5 -#: sc/uiconfig/scalc/ui/notebookbar.ui:8431 +#: sc/uiconfig/scalc/ui/notebookbar.ui:8636 msgctxt "CalcNotebookbar|StatisticsMenuButton" msgid "_Statistics" msgstr "統計(_S)" #. BiHBE -#: sc/uiconfig/scalc/ui/notebookbar.ui:8482 +#: sc/uiconfig/scalc/ui/notebookbar.ui:8687 msgctxt "CalcNotebookbar|DataMenuButton" msgid "_Data" msgstr "資料(_D)" #. xzx9j -#: sc/uiconfig/scalc/ui/notebookbar.ui:8591 +#: sc/uiconfig/scalc/ui/notebookbar.ui:8796 msgctxt "CalcNotebookbar|DataLabel" msgid "~Data" msgstr "資料(~D)" #. CBEHA -#: sc/uiconfig/scalc/ui/notebookbar.ui:9413 +#: sc/uiconfig/scalc/ui/notebookbar.ui:9618 msgctxt "CalcNotebookbar|ReviewMenuButton" msgid "_Review" msgstr "校閱(_R)" #. 7FXbr -#: sc/uiconfig/scalc/ui/notebookbar.ui:9499 +#: sc/uiconfig/scalc/ui/notebookbar.ui:9704 msgctxt "CalcNotebookbar|ReviewLabel" msgid "~Review" msgstr "校閱(~R)" #. NT37F -#: sc/uiconfig/scalc/ui/notebookbar.ui:10405 +#: sc/uiconfig/scalc/ui/notebookbar.ui:10610 msgctxt "CalcNotebookbar|ViewMenuButton" msgid "_View" msgstr "檢視(_V)" #. rPdAq -#: sc/uiconfig/scalc/ui/notebookbar.ui:10491 +#: sc/uiconfig/scalc/ui/notebookbar.ui:10696 msgctxt "CalcNotebookbar|ViewLabel" msgid "~View" msgstr "檢視(~V)" #. SAv6Z -#: sc/uiconfig/scalc/ui/notebookbar.ui:11544 +#: sc/uiconfig/scalc/ui/notebookbar.ui:11749 msgctxt "CalcNotebookbar|ImageMenuButton" msgid "Ima_ge" msgstr "影像(_G)" #. rwprK -#: sc/uiconfig/scalc/ui/notebookbar.ui:11669 +#: sc/uiconfig/scalc/ui/notebookbar.ui:11874 msgctxt "CalcNotebookbar|ImageLabel" msgid "Ima~ge" msgstr "影像(~G)" #. EjbzV -#: sc/uiconfig/scalc/ui/notebookbar.ui:12889 +#: sc/uiconfig/scalc/ui/notebookbar.ui:13094 msgctxt "CalcNotebookbar|DrawMenuButton" msgid "_Draw" msgstr "繪圖(_D)" #. iagRv -#: sc/uiconfig/scalc/ui/notebookbar.ui:12999 +#: sc/uiconfig/scalc/ui/notebookbar.ui:13204 msgctxt "CalcNotebookbar|DrawLabel" msgid "~Draw" msgstr "繪圖(~D)" #. EgeGL -#: sc/uiconfig/scalc/ui/notebookbar.ui:13471 +#: sc/uiconfig/scalc/ui/notebookbar.ui:13676 msgctxt "CalcNotebookbar|ConvertMenuButton" msgid "Convert" msgstr "轉換" #. PRmbH -#: sc/uiconfig/scalc/ui/notebookbar.ui:13772 +#: sc/uiconfig/scalc/ui/notebookbar.ui:13977 msgctxt "CalcNotebookbar|ObjectMenuButton" msgid "_Object" msgstr "物件(_O)" #. xTKVv -#: sc/uiconfig/scalc/ui/notebookbar.ui:13882 +#: sc/uiconfig/scalc/ui/notebookbar.ui:14087 msgctxt "CalcNotebookbar|FrameLabel" msgid "~Object" msgstr "物件(~O)" #. cHyKz -#: sc/uiconfig/scalc/ui/notebookbar.ui:14458 +#: sc/uiconfig/scalc/ui/notebookbar.ui:14663 msgctxt "CalcNotebookbar|MediaMenuButton" msgid "_Media" msgstr "媒體(_M)" #. CJ2qx -#: sc/uiconfig/scalc/ui/notebookbar.ui:14566 +#: sc/uiconfig/scalc/ui/notebookbar.ui:14771 msgctxt "CalcNotebookbar|MediaLabel" msgid "~Media" msgstr "媒體(~M)" #. eQK6A -#: sc/uiconfig/scalc/ui/notebookbar.ui:14967 +#: sc/uiconfig/scalc/ui/notebookbar.ui:15164 msgctxt "CalcNotebookbar|PrintMenuButton" msgid "_Print" msgstr "列印(_P)" #. sCGyG -#: sc/uiconfig/scalc/ui/notebookbar.ui:15051 +#: sc/uiconfig/scalc/ui/notebookbar.ui:15248 msgctxt "CalcNotebookbar|PrintLabel" msgid "~Print" msgstr "列印(~P)" #. 5JVAt -#: sc/uiconfig/scalc/ui/notebookbar.ui:15886 +#: sc/uiconfig/scalc/ui/notebookbar.ui:16083 msgctxt "CalcNotebookbar|FormMenuButton" msgid "Fo_rm" msgstr "表單(_R)" #. CCEAK -#: sc/uiconfig/scalc/ui/notebookbar.ui:15971 +#: sc/uiconfig/scalc/ui/notebookbar.ui:16168 msgctxt "CalcNotebookbar|FormLabel" msgid "Fo~rm" msgstr "表單(~R)" #. DHeyE -#: sc/uiconfig/scalc/ui/notebookbar.ui:16028 +#: sc/uiconfig/scalc/ui/notebookbar.ui:16225 msgctxt "CalcNotebookbar|ExtensionMenuButton" msgid "E_xtension" msgstr "擴充套件(_X)" #. 4ZDL7 -#: sc/uiconfig/scalc/ui/notebookbar.ui:16102 +#: sc/uiconfig/scalc/ui/notebookbar.ui:16299 msgctxt "CalcNotebookbar|ExtensionLabel" msgid "E~xtension" msgstr "擴充套件(~X)" #. 3Ec6T -#: sc/uiconfig/scalc/ui/notebookbar.ui:17330 +#: sc/uiconfig/scalc/ui/notebookbar.ui:17527 msgctxt "CalcNotebookbar|ToolsMenuButton" msgid "_Tools" msgstr "工具(_T)" #. 8HTEk -#: sc/uiconfig/scalc/ui/notebookbar.ui:17415 +#: sc/uiconfig/scalc/ui/notebookbar.ui:17612 msgctxt "CalcNotebookbar|ToolsLabel" msgid "~Tools" msgstr "工具(~T)" #. AJr3Y -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:3040 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:3047 msgctxt "notebookbar_compact|FileLabel" msgid "_File" msgstr "檔案(_F)" #. PU9ct -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:3090 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:3096 msgctxt "notebookbar_compact|FileLabel" msgid "~File" msgstr "檔案(~F)" #. UWfVg -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:3570 -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:6250 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:3576 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:6256 msgctxt "notebookbar_compact|bordertype|tooltip_text" msgid "Specify the borders of the selected cells." msgstr "指定所選儲存格的邊框。" #. JDRKC -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:4647 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:4653 msgctxt "notebookbar_compact|HomeMenuButton" msgid "_Menu" msgstr "選單(_M)" #. Svdz9 -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:4699 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:4705 msgctxt "notebookbar_compact|CalcLabel" msgid "~Home" msgstr "常用(~H)" #. ecBqZ -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:5206 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:5212 msgctxt "notebookbar_compact|FieldMenuButton" msgid "Fiel_d" msgstr "欄位(_D)" #. zveKA -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:5724 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:5730 msgctxt "notebookbar_compact|InsertMenuButton" msgid "_Insert" msgstr "插入(_I)" #. CDXv3 -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:5779 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:5785 msgctxt "notebookbar_compact|InsertLabel" msgid "~Insert" msgstr "插入(~I)" #. EvytN -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:6413 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:6419 msgctxt "notebookbar_compact|PageMenuButton" msgid "_Layout" msgstr "版面配置(_L)" #. TbQMa -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:6465 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:6471 msgctxt "notebookbar_compact|LayoutLabel" msgid "~Layout" msgstr "版面配置(~L)" #. QqjZP -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:7324 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:7330 msgctxt "notebookbar_compact|Statistics" msgid "_Statistics" msgstr "統計(_S)" #. GFZNz -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:7390 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:7396 msgctxt "notebookbar_compact|DataMenuButton" msgid "_Data" msgstr "資料(_D)" #. TCt7E -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:7441 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:7447 msgctxt "notebookbar_compact|DataLabel" msgid "~Data" msgstr "資料(~D)" #. jYD7j -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:8139 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:8145 msgctxt "notebookbar_compact|ReviewMenuButton" msgid "_Review" msgstr "校閱(_R)" #. Lbj5B -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:8191 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:8197 msgctxt "notebookbar_compact|ReviewLabel" msgid "~Review" msgstr "檢閱(~R)" #. 35kA2 -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:8873 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:8879 msgctxt "notebookbar_compact|ViewMenuButton" msgid "_View" msgstr "檢視(_V)" #. ZGh8C -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:8925 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:8931 msgctxt "notebookbar_compact|ViewLabel" msgid "~View" msgstr "檢視(~V)" #. dV94w -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:10315 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:10321 msgctxt "notebookbar_compact|GraphicMenuButton" msgid "Im_age" msgstr "影像(_A)" #. ekWoX -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:10367 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:10373 msgctxt "notebookbar_compact|ImageLabel" msgid "Ima~ge" msgstr "影像(~G)" #. 8eQN8 -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:11780 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:11786 msgctxt "notebookbar_compact|DrawMenuButton" msgid "D_raw" msgstr "繪圖(_R)" #. FBf68 -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:11832 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:11838 msgctxt "notebookbar_compact|ShapeLabel" msgid "~Draw" msgstr "繪圖(~D)" #. DoVwy -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:12810 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:12816 msgctxt "notebookbar_compact|ObjectMenuButton" msgid "Object" msgstr "物件" #. JXKiY -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:12862 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:12868 msgctxt "notebookbar_compact|FrameLabel" msgid "~Object" msgstr "物件(~O)" #. q8wnS -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:13582 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:13588 msgctxt "notebookbar_compact|MediaButton" msgid "_Media" msgstr "媒體(_M)" #. 7HDt3 -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:13635 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:13641 msgctxt "notebookbar_compact|MediaLabel" msgid "~Media" msgstr "媒體(~M)" #. vSDok -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:14209 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:14215 msgctxt "notebookbar_compact|PrintPreviewButton" msgid "Print" msgstr "列印" #. goiqQ -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:14261 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:14267 msgctxt "notebookbar_compact|FormLabel" msgid "~Print" msgstr "列印(~P)" #. EBGs5 -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:15616 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:15622 msgctxt "notebookbar_compact|FormButton" msgid "Fo_rm" msgstr "表單(_R)" #. EKA8X -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:15668 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:15674 msgctxt "notebookbar_compact|FormLabel" msgid "Fo~rm" msgstr "表單(~R)" #. 8SvE5 -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:15748 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:15754 msgctxt "notebookbar_compact|ExtensionMenuButton" msgid "E_xtension" msgstr "擴充套件(_X)" #. WH5NR -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:15806 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:15812 msgctxt "notebookbar_compact|ExtensionLabel" msgid "E~xtension" msgstr "擴充套件(~X)" #. 8fhwb -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:16839 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:16845 msgctxt "notebookbar_compact|ToolsMenuButton" msgid "_Tools" msgstr "工具(_T)" #. kpc43 -#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:16891 +#: sc/uiconfig/scalc/ui/notebookbar_compact.ui:16897 msgctxt "notebookbar_compact|DevLabel" msgid "~Tools" msgstr "工具(~T)" #. LL2dj -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:3301 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:3308 msgctxt "notebookbar_groupedbar_compact|fileb" msgid "_File" msgstr "檔案(_F)" #. MR7ZB -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:3412 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:3419 msgctxt "notebookbar_groupedbar_compact|editb" msgid "_Edit" msgstr "編輯(_E)" #. AXNcR -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:3531 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:5119 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:3538 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:5126 msgctxt "notebookbar_groupedbar_compact|paragraphstyleb" msgid "St_yles" msgstr "樣式(_Y)" #. scY66 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:3685 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:3692 msgctxt "notebookbar_groupedbar_compact|formatb" msgid "F_ont" msgstr "字型(_O)" #. LFB3L -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:3920 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:3927 msgctxt "notebookbar_groupedbar_compact|paragraphb" msgid "_Paragraph" msgstr "段落(_P)" #. UnsAB -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:4334 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:4341 msgctxt "notebookbar_groupedbar_compact|numberb" msgid "_Number" msgstr "數字(_N)" #. hBvBa -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:4448 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:4455 msgctxt "notebookbar_groupedbar_compact|datab" msgid "_Data" msgstr "資料(_D)" #. CMGpS -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:4562 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:4569 msgctxt "notebookbar_groupedbar_compact|insertb" msgid "_Insert" msgstr "插入(_I)" #. 5wZbP -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:4676 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:4683 msgctxt "notebookbar_groupedbar_compact|reviewb" msgid "_Review" msgstr "校對(_R)" #. Uyv2y -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:4790 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:4797 msgctxt "notebookbar_groupedbar_compact|viewb" msgid "_View" msgstr "檢視(_V)" #. bgPuY -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:4902 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:11442 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:4909 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:11443 msgctxt "notebookbar_groupedbar_compact|FormButton" msgid "Fo_rm" msgstr "表單(_R)" #. 5fAr4 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:4995 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:5002 msgctxt "notebookbar_groupedbar_compact|ExtensionMenuButton" msgid "E_xtension" msgstr "擴充套件(_X)" #. T2jYU -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:5273 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:5280 msgctxt "notebookbar_groupedbar_compact|FormatButton" msgid "F_ont" msgstr "字型(_O)" #. jZETF -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:5506 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:5513 msgctxt "notebookbar_groupedbar_compact|paragraphS" msgid "_Paragraph" msgstr "段落(_P)" #. 5Wp5j -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:5764 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:5771 msgctxt "notebookbar_groupedbar_compact|viewS" msgid "_View" msgstr "檢視(_V)" #. DC7Hv -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:5902 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:5909 msgctxt "notebookbar_groupedbar_compact|editdrawb" msgid "D_raw" msgstr "繪圖(_R)" #. ncAKi -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:6340 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:7926 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:8997 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:9618 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:10452 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:6347 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:7933 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:9004 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:9625 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:10459 msgctxt "notebookbar_groupedbar_compact|ArrangeButton" msgid "_Arrange" msgstr "編排(_A)" #. 8pLR3 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:6624 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:6631 msgctxt "notebookbar_groupedbar_compact|draw" msgid "_Shape" msgstr "形狀(_S)" #. NM63T -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:6880 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:10709 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:6887 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:10716 msgctxt "notebookbar_groupedbar_compact|viewDrawb" msgid "Grou_p" msgstr "群組(_P)" #. cbMTW -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:7006 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:7013 msgctxt "notebookbar_groupedbar_compact|3Db" msgid "3_D" msgstr "3_D" #. BTzDn -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:7241 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:7248 msgctxt "notebookbar_groupedbar_compact|GridButton" msgid "_Fontwork" msgstr "美術字(_F)" #. PLqyG -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:7355 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:8431 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:9254 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:9876 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:10824 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:7362 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:8438 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:9261 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:9883 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:10831 msgctxt "notebookbar_groupedbar_compact|GridButton" msgid "_Grid" msgstr "網格(_G)" #. K6izG -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:7488 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:7495 msgctxt "notebookbar_groupedbar_compact|ImageButton" msgid "Im_age" msgstr "影像(_A)" #. SEFWn -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:8160 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:8167 msgctxt "notebookbar_groupedbar_compact|ColorButton" msgid "Fi_lter" msgstr "篩選器(_L)" #. 5a4zV -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:8559 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:8566 msgctxt "notebookbar_groupedbar_compact|graphicB" msgid "_Object" msgstr "物件(_O)" #. Ghwp6 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:9383 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:9390 msgctxt "notebookbar_groupedbar_compact|graphicB" msgid "_Media" msgstr "媒體(_M)" #. nyHDP -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:10014 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:10021 msgctxt "notebookbar_groupedbar_compact|editdrawb" msgid "_Edit" msgstr "編輯(_E)" #. PhCFL -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:11309 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:11310 msgctxt "notebookbar_groupedbar_compact|PrintMenuButton" msgid "_Print" msgstr "列印(_P)" #. RC7F3 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:12226 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_compact.ui:12227 msgctxt "notebookbar_groupedbar_compact|MenuButton" msgid "_Menu" msgstr "選單(_M)" #. mBSfG -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2609 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2615 msgctxt "notebookbar_groupedbar_full|defaultD" msgid "Default" msgstr "預設" #. Z7t2R -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2623 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2629 msgctxt "notebookbar_groupedbar_full|Accent1" msgid "Accent 1" msgstr "強調 1" #. xeEFE -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2631 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2637 msgctxt "notebookbar_groupedbar_full|Accent2" msgid "Accent 2" msgstr "強調 2" #. G3TRo -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2639 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2645 msgctxt "notebookbar_groupedbar_full|Accent3" msgid "Accent 3" msgstr "強調 3" #. QcUKG -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2653 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2659 msgctxt "notebookbar_groupedbar_full|Header1" msgid "Heading 1" msgstr "" #. 6Ej4G -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2661 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2667 msgctxt "notebookbar_groupedbar_full|Header2" msgid "Heading 2" msgstr "" #. sqE94 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2675 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2681 msgctxt "notebookbar_groupedbar_full|bad" msgid "Bad" msgstr "不佳" #. 3ibZN -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2683 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2689 msgctxt "notebookbar_groupedbar_full|good" msgid "Good" msgstr "優良" #. DGBbw -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2691 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2697 msgctxt "notebookbar_groupedbar_full|neutral" msgid "Neutral" msgstr "中等" #. keb9M -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2699 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2705 msgctxt "notebookbar_groupedbar_full|error" msgid "Error" msgstr "錯誤" #. WtFbH -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2707 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2713 msgctxt "notebookbar_groupedbar_full|warning" msgid "Warning" msgstr "警告" #. t9EbD -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2721 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2727 msgctxt "notebookbar_groupedbar_full|footnote" msgid "Footnote" msgstr "註腳" #. FFrSw -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2729 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:2735 msgctxt "notebookbar_groupedbar_full|note" msgid "Note" msgstr "備註" #. EsADr -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:3220 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:3226 msgctxt "notebookbar_groupedbar_full|menub" msgid "_Menu" msgstr "選單(_M)" #. Ch63h -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:3274 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:3280 msgctxt "notebookbar_groupedbar_full|toolsb" msgid "_Tools" msgstr "工具(_T)" #. kdH4L -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:3330 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:3335 msgctxt "notebookbar_groupedbar_full|helpb" msgid "_Help" msgstr "說明(_H)" #. bkg23 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:3439 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:3444 msgctxt "notebookbar_groupedbar_full|fileb" msgid "_File" msgstr "檔案(_F)" #. aqbEs -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:3677 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:3682 msgctxt "notebookbar_groupedbar_full|editb" msgid "_Edit" msgstr "編輯(_E)" #. HFC9U -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:3874 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:3879 msgctxt "notebookbar_groupedbar_full|paragraphstyleb" msgid "St_yles" msgstr "樣式(_Y)" #. VFtWK -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:4147 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:4152 msgctxt "notebookbar_groupedbar_full|formatb" msgid "F_ont" msgstr "字型(_O)" #. 9HzEG -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:4393 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:4398 msgctxt "notebookbar_groupedbar_full|numberb" msgid "_Number" msgstr "數字(_N)" #. F7vQ2 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:4609 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:4614 msgctxt "notebookbar_groupedbar_full|paragraphb" msgid "_Alignment" msgstr "對齊(_A)" #. QnhiG -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:4843 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:4848 msgctxt "notebookbar_groupedbar_full|cellb" msgid "_Cells" msgstr "儲存格(_C)" #. rrpkZ -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:5004 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:5009 msgctxt "notebookbar_groupedbar_full|insertb" msgid "_Insert" msgstr "插入(_I)" #. NsDSM -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:5187 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:5192 msgctxt "notebookbar_groupedbar_full|datab" msgid "_Data" msgstr "資料(_D)" #. gQQfL -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:5359 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:5364 msgctxt "notebookbar_groupedbar_full|reviewb" msgid "_Review" msgstr "校閱(_R)" #. BHDdD -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:5531 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:5536 msgctxt "notebookbar_groupedbar_full|viewb" msgid "_View" msgstr "檢視(_V)" #. ZJufp -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:5756 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:5761 msgctxt "notebookbar_groupedbar_full|graphicB" msgid "Im_age" msgstr "影像(_A)" #. punQr -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:6108 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:6113 msgctxt "notebookbar_groupedbar_full|arrange" msgid "_Arrange" msgstr "編排(_A)" #. DDTxx -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:6259 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:6264 msgctxt "notebookbar_groupedbar_full|colorb" msgid "C_olor" msgstr "色彩(_O)" #. CHosB -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:6510 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:6515 msgctxt "notebookbar_groupedbar_full|GridB" msgid "_Grid" msgstr "網格(_G)" #. xeUxD -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:6647 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:6652 msgctxt "notebookbar_groupedbar_full|languageb" msgid "_Language" msgstr "語言(_L)" #. eBoPL -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:6876 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:6881 msgctxt "notebookbar_groupedbar_full|revieb" msgid "_Review" msgstr "校閱(_R)" #. y4Sg3 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:7089 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:7094 msgctxt "notebookbar_groupedbar_full|commentsb" msgid "_Comments" msgstr "評註(_C)" #. m9Mxg -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:7292 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:7297 msgctxt "notebookbar_groupedbar_full|compareb" msgid "Com_pare" msgstr "比較(_P)" #. ewCjP -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:7494 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:7499 msgctxt "notebookbar_groupedbar_full|viewa" msgid "_View" msgstr "檢視(_V)" #. WfzeY -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:7940 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:7945 msgctxt "notebookbar_groupedbar_full|drawb" msgid "D_raw" msgstr "繪圖(_R)" #. QNg9L -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:8309 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:8314 msgctxt "notebookbar_groupedbar_full|editdrawb" msgid "_Edit" msgstr "編輯(_E)" #. MECyG -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:8650 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:8655 msgctxt "notebookbar_groupedbar_full|arrangedrawb" msgid "_Arrange" msgstr "編排(_A)" #. 9Z4JQ -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:8817 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:8822 msgctxt "notebookbar_groupedbar_full|GridDrawB" msgid "_View" msgstr "檢視(_V)" #. 3i55T -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:9019 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:9024 msgctxt "notebookbar_groupedbar_full|viewDrawb" msgid "Grou_p" msgstr "群組(_P)" #. fNGFB -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:9169 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:9174 msgctxt "notebookbar_groupedbar_full|3Db" msgid "3_D" msgstr "3_D" #. stsit -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:9478 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:9483 msgctxt "notebookbar_groupedbar_full|formatd" msgid "F_ont" msgstr "字型(_O)" #. ZDEax -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:9743 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:9748 msgctxt "notebookbar_groupedbar_full|paragraphTextb" msgid "_Alignment" msgstr "對齊(_A)" #. CVAyh -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:9945 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:9950 msgctxt "notebookbar_groupedbar_full|viewd" msgid "_View" msgstr "檢視(_V)" #. h6EHi -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:10099 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:10104 msgctxt "notebookbar_groupedbar_full|insertTextb" msgid "_Insert" msgstr "插入(_I)" #. eLnnF -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:10244 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:10249 msgctxt "notebookbar_groupedbar_full|media" msgid "_Media" msgstr "媒體(_M)" #. dzADL -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:10481 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:10486 msgctxt "notebookbar_groupedbar_full|oleB" msgid "F_rame" msgstr "外框(_R)" #. GjFnB -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:10912 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:10917 msgctxt "notebookbar_groupedbar_full|arrageOLE" msgid "_Arrange" msgstr "編排(_A)" #. DF4U7 -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:11078 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:11083 msgctxt "notebookbar_groupedbar_full|OleGridB" msgid "_Grid" msgstr "網格(_G)" #. UZ2JJ -#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:11280 +#: sc/uiconfig/scalc/ui/notebookbar_groupedbar_full.ui:11285 msgctxt "notebookbar_groupedbar_full|viewf" msgid "_View" msgstr "檢視(_V)" @@ -25928,559 +26017,559 @@ msgid "Cancel" msgstr "取消" #. T2p5k -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:47 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:42 msgctxt "optcalculatepage|threadingenabled" msgid "Enable multi-threaded calculation" msgstr "啟用多執行緒計算" #. c8e4A -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:51 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:46 msgctxt "optcalculatepage|threadingenabled|tooltip_text" msgid "Enable multi-threaded calculation of formula-groups" msgstr "啟用公式群組的多執行緒計算" #. nkMjn -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:70 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:63 msgctxt "optcalculatepage|label4" msgid "CPU Threading Settings" msgstr "" #. XyA9j -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:103 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:92 msgctxt "optcalculatepage|case" msgid "Case se_nsitive" msgstr "區分字母大小寫(_N)" #. FF8Nh -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:107 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:96 msgctxt "optcalculatepage|case|tooltip_text" msgid "Disable case sensitivity for interoperability with Microsoft Excel" msgstr "停用大小寫區分以與 Microsoft Excel 相容" #. fGMgy -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:113 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:102 msgctxt "extended_tip|case" msgid "Specifies whether to distinguish between upper and lower case in texts when comparing cell contents." msgstr "指定在比較儲存格內容時是否區分文字中字母的大小寫。" #. 9W56L -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:124 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:113 msgctxt "optcalculatepage|calc" msgid "_Precision as shown" msgstr "顯示的精確度(_P)" #. YGAFd -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:133 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:122 msgctxt "extended_tip|calc" msgid "Specifies whether to make calculations using the rounded values displayed in the sheet. Charts will be shown with the displayed values. If the Precision as shown option is not marked, the displayed numbers are rounded, but they are calculated internally using the non-rounded number." msgstr "指定是否使用試算表中所顯示的四捨五入值進行計算。顯示圖表時將採用顯示的數值。如果未標記 [顯示的精確度] 選項，則以四捨五入的數值顯示數字，但在進行內部計算時會使用未經四捨五入的數字。" #. BiDg6 -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:144 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:133 msgctxt "optcalculatepage|match" msgid "Search criteria = and <> must apply to _whole cells" msgstr "搜尋條件 = 和 <> 必須套用至全部的儲存格(_W)" #. d3ZgB -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:148 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:137 msgctxt "optcalculatepage|match|tooltip_text" msgid "Enable this for interoperability with Microsoft Excel" msgstr "啟用此選項以與 Microsoft Excel 相容" #. APEQn -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:154 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:143 msgctxt "extended_tip|match" msgid "Specifies that the search criteria you set for the Calc database functions must match the whole cell exactly. When both, the Search criteria = and <> must apply to whole cells box and the Enable wildcards in formulas box are marked, %PRODUCTNAME Calc behaves exactly as Microsoft Excel when searching cells in the database functions." msgstr "指定您為 Calc 資料庫功能所設定的搜尋條件必須完全符合整個儲存格。若標記了 [搜尋範圍 = 和 <> 必須適用全部的儲存格] 方塊，%PRODUCTNAME Calc 在資料庫功能中搜尋儲存格時的運作方式會與 MS Excel 完全相同。" #. 5Wn8V -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:165 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:154 msgctxt "optcalculatepage|lookup" msgid "_Automatically find column and row labels" msgstr "自動尋找欄標籤與列標籤(_A)" #. XVS3t -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:174 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:163 msgctxt "extended_tip|lookup" msgid "Specifies that you can use the text in any cell as a label for the column below the text or the row to the right of the text. The text must consist of at least one word and must not contain any operators." msgstr "指定您可以使用任意儲存格中的文字作為該文字下方的欄或文字右側列的標籤。該文字至少要含有一個字，並且不能包含任何運算子。" #. DwExc -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:185 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:174 msgctxt "optcalculatepage|generalprec" msgid "_Limit decimals for general number format" msgstr "限制一般數字格式的小數點(_L)" #. hufmT -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:194 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:183 msgctxt "extended_tip|generalprec" msgid "You can specify the maximum number of decimal places that are shown by default for cells with General number format. If not enabled, cells with General number format show as many decimal places as the column width allows." msgstr "" #. buc6F -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:217 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:202 msgctxt "optcalculatepage|precft" msgid "_Decimal places:" msgstr "小數點位數(_D)：" #. riZoc -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:235 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:220 msgctxt "extended_tip|prec" msgid "Defines the number of decimals to be displayed for numbers with the General number format. The numbers are displayed as rounded numbers, but are not saved as rounded numbers." msgstr "" #. tnj5y -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:261 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:242 msgctxt "optcalculatepage|label1" msgid "General Calculations" msgstr "一般計算" #. p2vT9 -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:294 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:271 msgctxt "optcalculatepage|iterate" msgid "_Iterations" msgstr "迭代(_I)" #. pBKcn -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:303 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:280 msgctxt "extended_tip|iterate" msgid "Specifies whether formulas with iterative references (formulas that are continuously repeated until the problem is solved) are calculated after a specific number of repetitions." msgstr "指定帶有反覆式參照的公式 (即需要不斷重複計算才能得到結果的公式)，在進行了特定次數的重複計算後是否繼續。" #. S6iwg -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:329 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:302 msgctxt "optcalculatepage|stepsft" msgid "_Steps:" msgstr "步數(_S)：" #. aJT9u -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:343 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:316 msgctxt "optcalculatepage|minchangeft" msgid "_Minimum change:" msgstr "最小變動(_M)：" #. GmKgv -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:361 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:334 msgctxt "extended_tip|steps" msgid "Sets the maximum number of iteration steps." msgstr "設定最大迭代步數。" #. ZekEF -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:378 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:351 msgctxt "extended_tip|minchange" msgid "Specifies the difference between two consecutive iteration step results. If the result of the iteration is lower than the minimum change value, then the iteration will stop." msgstr "指定兩個連續循環步驟結果的差值。如果循環的結果小於最小變更值，則循環將停止。" #. UoUqA -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:404 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:373 msgctxt "optcalculatepage|label2" msgid "Iterative References" msgstr "迭代式參照" #. BA74j -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:436 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:401 msgctxt "optcalculatepage|datestd" msgid "12/30/1899 (defa_ult)" msgstr "12/30/1899 (預設)(_U)" #. ApqYV -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:440 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:405 msgctxt "optcalculatepage|datestd|tooltip_text" msgid "Value 0 corresponds to 12/30/1899" msgstr "值 0 對應至 12/30/1899" #. SCewx -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:447 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:412 msgctxt "extended_tip|datestd" msgid "Sets 12/30/1899 as day zero." msgstr "將 12/30/1899 設定為初始日期。" #. mznb9 -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:458 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:423 msgctxt "optcalculatepage|datesc10" msgid "01/01/1900 (Star_Calc 1.0)" msgstr "01/01/1900 (Star_Calc 1.0)" #. etLCb -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:462 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:427 msgctxt "optcalculatepage|datesc10|tooltip_text" msgid "Value 0 corresponds to 01/01/1900" msgstr "值 0 對應至 01/01/1900" #. LEunE -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:469 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:434 msgctxt "extended_tip|datesc10" msgid "Sets 1/1/1900 as day zero. Use this setting for StarCalc 1.0 spreadsheets containing date entries." msgstr "將 1/1/1900 設定為初始日期。對於含有日期條目的 StarCalc 1.0 試算表，請使用此設定。" #. J9ECM -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:480 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:445 msgctxt "optcalculatepage|date1904" msgid "_01/01/1904" msgstr "_01/01/1904" #. aBzk5 -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:484 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:449 msgctxt "optcalculatepage|date1904|tooltip_text" msgid "0 corresponds to 01/01/1904" msgstr "0 對應至 01/01/1904" #. EkAYW -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:491 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:456 msgctxt "extended_tip|date1904" msgid "Sets 1/1/1904 as day zero. Use this setting for spreadsheets that are imported in a foreign format." msgstr "將 1/1/1904 設定為初始日期。對於以外來格式匯入的試算表，請使用此設定。" #. ggkEL -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:508 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:471 msgctxt "optcalculatepage|label3" msgid "Date" msgstr "日期" #. Hd6CV -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:539 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:498 msgctxt "optcalculatepage|formulawildcards" msgid "Enable w_ildcards in formulas" msgstr "公式中啟用萬用字元(_I)" #. BKAzW -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:543 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:502 msgctxt "optcalculatepage|formulawildcards|tooltip_text" msgid "Enable wildcards for interoperability with Microsoft Excel" msgstr "啟用萬用字元以與 Microsoft Excel 相容" #. KXxjQ -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:550 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:509 msgctxt "extended_tip|formulawildcards" msgid "Specifies that wildcards are enabled when searching and also for character string comparisons." msgstr "" #. Gghyb -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:561 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:520 msgctxt "optcalculatepage|formularegex" msgid "Enable r_egular expressions in formulas" msgstr "公式中啟用常規表達式(_E)" #. D9B3G -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:571 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:530 msgctxt "extended_tip|formularegex" msgid "Specifies that regular expressions instead of simple wildcards are enabled when searching and also for character string comparisons." msgstr "" #. gg3Am -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:582 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:541 msgctxt "optcalculatepage|formulaliteral" msgid "No wildcards or regular expressions in formulas" msgstr "公式中沒有萬用字元或常規表述式" #. BwEWx -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:592 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:551 msgctxt "extended_tip|formulaliteral" msgid "Specifies that only literal strings are used when searching and also for character string comparisons." msgstr "" #. XEPCe -#: sc/uiconfig/scalc/ui/optcalculatepage.ui:609 +#: sc/uiconfig/scalc/ui/optcalculatepage.ui:566 msgctxt "optcalculatepage|label5" msgid "Formulas Wildcards" msgstr "" #. Umdv5 -#: sc/uiconfig/scalc/ui/optchangespage.ui:37 +#: sc/uiconfig/scalc/ui/optchangespage.ui:32 msgctxt "optchangespage|label2" msgid "Chan_ges:" msgstr "變動(_G)：" #. yrmgC -#: sc/uiconfig/scalc/ui/optchangespage.ui:51 +#: sc/uiconfig/scalc/ui/optchangespage.ui:46 msgctxt "optchangespage|label3" msgid "_Deletions:" msgstr "刪除(_D)：" #. bJb2E -#: sc/uiconfig/scalc/ui/optchangespage.ui:65 +#: sc/uiconfig/scalc/ui/optchangespage.ui:60 msgctxt "optchangespage|label4" msgid "_Insertions:" msgstr "插入(_I)：" #. ikfvj -#: sc/uiconfig/scalc/ui/optchangespage.ui:79 +#: sc/uiconfig/scalc/ui/optchangespage.ui:74 msgctxt "optchangespage|label5" msgid "_Moved entries:" msgstr "移動的條目(_M)：" #. BiCsr -#: sc/uiconfig/scalc/ui/optchangespage.ui:103 +#: sc/uiconfig/scalc/ui/optchangespage.ui:98 msgctxt "extended_tip|changes" msgid "Specifies the color for changes of cell contents." msgstr "" #. NGpxf -#: sc/uiconfig/scalc/ui/optchangespage.ui:126 +#: sc/uiconfig/scalc/ui/optchangespage.ui:121 msgctxt "extended_tip|deletions" msgid "Specifies the color to highlight deletions in a document." msgstr "" #. XXK7D -#: sc/uiconfig/scalc/ui/optchangespage.ui:149 +#: sc/uiconfig/scalc/ui/optchangespage.ui:144 msgctxt "extended_tip|entries" msgid "Specifies the color to highlight moved cell contents." msgstr "" #. 67CPn -#: sc/uiconfig/scalc/ui/optchangespage.ui:172 +#: sc/uiconfig/scalc/ui/optchangespage.ui:167 msgctxt "extended_tip|insertions" msgid "Specifies the color to highlight insertions in a document." msgstr "" #. AYxhD -#: sc/uiconfig/scalc/ui/optchangespage.ui:189 +#: sc/uiconfig/scalc/ui/optchangespage.ui:182 msgctxt "optchangespage|label1" msgid "Colors for Changes" msgstr "變更處以彩色顯示" #. GyGpz -#: sc/uiconfig/scalc/ui/optchangespage.ui:204 +#: sc/uiconfig/scalc/ui/optchangespage.ui:197 msgctxt "extended_tip|OptChangesPage" msgid "The Changes dialog specifies various options for highlighting recorded changes in documents." msgstr "" #. CrAWh -#: sc/uiconfig/scalc/ui/optcompatibilitypage.ui:42 +#: sc/uiconfig/scalc/ui/optcompatibilitypage.ui:36 msgctxt "optcompatibilitypage|label2" msgid "Select desired _key binding type. Changing the key binding type may overwrite some of the existing key bindings." msgstr "選擇偏好的組合鍵型式。變更組合鍵型式可能會覆蓋一些現有的組合鍵設定。(_K)" #. CER9u -#: sc/uiconfig/scalc/ui/optcompatibilitypage.ui:62 +#: sc/uiconfig/scalc/ui/optcompatibilitypage.ui:56 msgctxt "optcompatibilitypage|keybindings" msgid "Default" msgstr "預設" #. 3mLBb -#: sc/uiconfig/scalc/ui/optcompatibilitypage.ui:63 +#: sc/uiconfig/scalc/ui/optcompatibilitypage.ui:57 msgctxt "optcompatibilitypage|keybindings" msgid "OpenOffice.org legacy" msgstr "OpenOffice.org 傳統模式" #. g9ysB -#: sc/uiconfig/scalc/ui/optcompatibilitypage.ui:79 +#: sc/uiconfig/scalc/ui/optcompatibilitypage.ui:71 msgctxt "optcompatibilitypage|label1" msgid "Key Bindings" msgstr "組合鍵" #. Z7mEE -#: sc/uiconfig/scalc/ui/optcompatibilitypage.ui:94 +#: sc/uiconfig/scalc/ui/optcompatibilitypage.ui:86 msgctxt "extended_tip|OptCompatibilityPage" msgid "Defines compatibility options for %PRODUCTNAME Calc." msgstr "" #. Jcvih -#: sc/uiconfig/scalc/ui/optdefaultpage.ui:40 +#: sc/uiconfig/scalc/ui/optdefaultpage.ui:36 msgctxt "optdefaultpage|textsheetsnumber" msgid "_Number of worksheets in new document:" msgstr "新文件中工作表的數目(_N)：" #. RpAUD -#: sc/uiconfig/scalc/ui/optdefaultpage.ui:54 +#: sc/uiconfig/scalc/ui/optdefaultpage.ui:50 msgctxt "optdefaultpage|textsheetprefix" msgid "_Prefix name for new worksheet:" msgstr "新工作表的前綴名(_P)：" #. jPutK -#: sc/uiconfig/scalc/ui/optdefaultpage.ui:91 +#: sc/uiconfig/scalc/ui/optdefaultpage.ui:87 msgctxt "optdefaultpage|jumbo_sheets" msgid "_Enable very large spreadsheets (16m rows, 16384 cols)" msgstr "啟用非常大型試算表 (1千6百萬列, 16384 欄)(_E)" #. xW5dC -#: sc/uiconfig/scalc/ui/optdefaultpage.ui:112 +#: sc/uiconfig/scalc/ui/optdefaultpage.ui:106 msgctxt "optdefaultpage|label1" msgid "New Spreadsheet" msgstr "新試算表" #. Ap57D -#: sc/uiconfig/scalc/ui/optdefaultpage.ui:127 +#: sc/uiconfig/scalc/ui/optdefaultpage.ui:121 msgctxt "extended_tip|OptDefaultPage" msgid "Defines default settings for new spreadsheet documents." msgstr "" #. TueVT -#: sc/uiconfig/scalc/ui/optdlg.ui:31 +#: sc/uiconfig/scalc/ui/optdlg.ui:27 msgctxt "optdlg|forceBreaksCB" msgid "_Always apply manual breaks" msgstr "總是套用手動分隔處(_A)" #. gbrKD -#: sc/uiconfig/scalc/ui/optdlg.ui:47 +#: sc/uiconfig/scalc/ui/optdlg.ui:43 msgctxt "optdlg|suppressCB" msgid "_Suppress output of empty pages" msgstr "不列印空白頁面(_S)" #. 6chh5 -#: sc/uiconfig/scalc/ui/optdlg.ui:56 +#: sc/uiconfig/scalc/ui/optdlg.ui:52 msgctxt "extended_tip|suppressCB" msgid "Specifies that empty pages that have no cell contents or draw objects are not printed." msgstr "" #. udgBk -#: sc/uiconfig/scalc/ui/optdlg.ui:74 +#: sc/uiconfig/scalc/ui/optdlg.ui:68 msgctxt "optdlg|label1" msgid "Pages" msgstr "頁面" #. nfmkw -#: sc/uiconfig/scalc/ui/optdlg.ui:107 +#: sc/uiconfig/scalc/ui/optdlg.ui:97 msgctxt "optdlg|printCB" msgid "_Print only selected sheets" msgstr "僅列印選取的工作表(_P)" #. Cqsrk -#: sc/uiconfig/scalc/ui/optdlg.ui:116 +#: sc/uiconfig/scalc/ui/optdlg.ui:106 msgctxt "extended_tip|printCB" msgid "Specifies that only contents from selected sheets are printed, even if you specify a wider range in the File - Print dialog or in the Format - Print Ranges dialog. Contents from sheets that are not selected will not be printed." msgstr "" #. wT6PN -#: sc/uiconfig/scalc/ui/optdlg.ui:134 +#: sc/uiconfig/scalc/ui/optdlg.ui:122 msgctxt "optdlg|label2" msgid "Sheets" msgstr "工作表" #. JptgQ -#: sc/uiconfig/scalc/ui/optdlg.ui:150 +#: sc/uiconfig/scalc/ui/optdlg.ui:138 msgctxt "extended_tip|optCalcPrintPage" msgid "Determines the printer settings for spreadsheets." msgstr "確定試算表的印表機設定。" #. nQBpo -#: sc/uiconfig/scalc/ui/optformula.ui:32 +#: sc/uiconfig/scalc/ui/optformula.ui:28 msgctxt "optformula|englishfuncname" msgid "Use English function names" msgstr "使用英文函式名稱" #. EH5Je -#: sc/uiconfig/scalc/ui/optformula.ui:67 +#: sc/uiconfig/scalc/ui/optformula.ui:63 msgctxt "optformula|formulasyntaxlabel" msgid "Formula _syntax:" msgstr "公式語法(_S)：" #. 6ioPy -#: sc/uiconfig/scalc/ui/optformula.ui:90 +#: sc/uiconfig/scalc/ui/optformula.ui:84 msgctxt "optformula|label1" msgid "Formula Options" msgstr "公式選項" #. PhhTm -#: sc/uiconfig/scalc/ui/optformula.ui:125 +#: sc/uiconfig/scalc/ui/optformula.ui:115 msgctxt "optformula|label9" msgid "Excel 2007 and newer:" msgstr "Excel 2007 與後續版本：" #. y4nbF -#: sc/uiconfig/scalc/ui/optformula.ui:139 +#: sc/uiconfig/scalc/ui/optformula.ui:129 msgctxt "optformula|label10" msgid "ODF spreadsheet (not saved by %PRODUCTNAME):" msgstr "ODF 試算表 (非由 %PRODUCTNAME 儲存)：" #. 5AAhB -#: sc/uiconfig/scalc/ui/optformula.ui:155 +#: sc/uiconfig/scalc/ui/optformula.ui:145 msgctxt "optformula|ooxmlrecalc" msgid "Always recalculate" msgstr "總是重新計算" #. Q8aGX -#: sc/uiconfig/scalc/ui/optformula.ui:156 +#: sc/uiconfig/scalc/ui/optformula.ui:146 msgctxt "optformula|ooxmlrecalc" msgid "Never recalculate" msgstr "永不重新計算" #. FgKKL -#: sc/uiconfig/scalc/ui/optformula.ui:157 +#: sc/uiconfig/scalc/ui/optformula.ui:147 msgctxt "optformula|ooxmlrecalc" msgid "Prompt user" msgstr "提示使用者" #. mfD5X -#: sc/uiconfig/scalc/ui/optformula.ui:171 +#: sc/uiconfig/scalc/ui/optformula.ui:161 msgctxt "optformula|odfrecalc" msgid "Always recalculate" msgstr "總是重新計算" #. UZPCC -#: sc/uiconfig/scalc/ui/optformula.ui:172 +#: sc/uiconfig/scalc/ui/optformula.ui:162 msgctxt "optformula|odfrecalc" msgid "Never recalculate" msgstr "永不重新計算" #. 8tDNE -#: sc/uiconfig/scalc/ui/optformula.ui:173 +#: sc/uiconfig/scalc/ui/optformula.ui:163 msgctxt "optformula|odfrecalc" msgid "Prompt user" msgstr "提示使用者" #. xoCdo -#: sc/uiconfig/scalc/ui/optformula.ui:189 +#: sc/uiconfig/scalc/ui/optformula.ui:177 msgctxt "optformula|label4" msgid "Recalculation on File Load" msgstr "檔案載入時重新計算" #. rDiac -#: sc/uiconfig/scalc/ui/optformula.ui:224 +#: sc/uiconfig/scalc/ui/optformula.ui:207 msgctxt "optformula|calcdefault" msgid "Default settings" msgstr "預設設定" #. RwEz8 -#: sc/uiconfig/scalc/ui/optformula.ui:246 +#: sc/uiconfig/scalc/ui/optformula.ui:229 msgctxt "optformula|calccustom" msgid "Custom (conversion of text to numbers and more):" msgstr "自訂 (將文字轉換為數字等)：" #. GWa6o -#: sc/uiconfig/scalc/ui/optformula.ui:262 +#: sc/uiconfig/scalc/ui/optformula.ui:245 msgctxt "optformula|details" msgid "Details…" msgstr "細節…" #. bNtqA -#: sc/uiconfig/scalc/ui/optformula.ui:287 +#: sc/uiconfig/scalc/ui/optformula.ui:268 msgctxt "optformula|label2" msgid "Detailed Calculation Settings" msgstr "詳細計算設定" #. t4SBB -#: sc/uiconfig/scalc/ui/optformula.ui:325 +#: sc/uiconfig/scalc/ui/optformula.ui:301 msgctxt "optformula|label6" msgid "_Function:" msgstr "函式(_F)：" #. vnh8f -#: sc/uiconfig/scalc/ui/optformula.ui:339 +#: sc/uiconfig/scalc/ui/optformula.ui:315 msgctxt "optformula|label7" msgid "Array co_lumn:" msgstr "陣列欄(_L)：" #. 6sZYU -#: sc/uiconfig/scalc/ui/optformula.ui:353 +#: sc/uiconfig/scalc/ui/optformula.ui:329 msgctxt "optformula|label8" msgid "Array _row:" msgstr "陣列列(_R)：" #. GQdGa -#: sc/uiconfig/scalc/ui/optformula.ui:407 +#: sc/uiconfig/scalc/ui/optformula.ui:383 msgctxt "optformula|reset" msgid "Rese_t Separators Settings" msgstr "重設分隔符設定(_T)" #. 9oMMw -#: sc/uiconfig/scalc/ui/optformula.ui:433 +#: sc/uiconfig/scalc/ui/optformula.ui:407 msgctxt "optformula|label3" msgid "Separators" msgstr "分隔符" #. Pk6nr -#: sc/uiconfig/scalc/ui/optformula.ui:447 +#: sc/uiconfig/scalc/ui/optformula.ui:421 msgctxt "extended_tip|OptFormula" msgid "Defines formula syntax options and loading options for %PRODUCTNAME Calc." msgstr "" @@ -26798,289 +26887,331 @@ msgid "Cell Protection" msgstr "儲存格保護" #. biiBk -#: sc/uiconfig/scalc/ui/pastespecial.ui:23 +#: sc/uiconfig/scalc/ui/pastespecial.ui:32 msgctxt "pastespecial|PasteSpecial" msgid "Paste Special" msgstr "選擇性貼上" -#. XyU8o -#: sc/uiconfig/scalc/ui/pastespecial.ui:99 -msgctxt "pastespecial|paste_values_only|tooltip_text" -msgid "Values Only" -msgstr "僅數值" - -#. 7GuDi -#: sc/uiconfig/scalc/ui/pastespecial.ui:114 -msgctxt "pastespecial|paste_values_formats|tooltip_text" -msgid "Values & Formats" -msgstr "數值與格式" - -#. NJh3h -#: sc/uiconfig/scalc/ui/pastespecial.ui:129 -msgctxt "pastespecial|paste_transpose|tooltip_text" -msgid "Transpose" -msgstr "列欄替換" - -#. 5QYC5 -#: sc/uiconfig/scalc/ui/pastespecial.ui:175 +#. g6DfA +#: sc/uiconfig/scalc/ui/pastespecial.ui:124 msgctxt "pastespecial|paste_all" -msgid "_Paste all" -msgstr "全部貼上(_P)" +msgid "_All" +msgstr "" #. Labin -#: sc/uiconfig/scalc/ui/pastespecial.ui:185 +#: sc/uiconfig/scalc/ui/pastespecial.ui:134 msgctxt "pastespecial|extended_tip|paste_all" msgid "Pastes all cell contents, comments, formats, and objects into the current document." msgstr "" -#. BSEWE -#: sc/uiconfig/scalc/ui/pastespecial.ui:197 -msgctxt "pastespecial|text" -msgid "Te_xt" -msgstr "文字(_X)" +#. NT4Am +#: sc/uiconfig/scalc/ui/pastespecial.ui:145 +msgctxt "pastespecial|comments" +msgid "_Comments" +msgstr "評註(_C)" -#. JWDk5 -#: sc/uiconfig/scalc/ui/pastespecial.ui:206 -msgctxt "pastespecial|extended_tip|text" -msgid "Inserts cells containing text." +#. 3uP7i +#: sc/uiconfig/scalc/ui/pastespecial.ui:154 +msgctxt "pastespecial|extended_tip|comments" +msgid "Inserts comments that are attached to cells. If you want to add the comments to the existing cell content, select the \"Add\" operation." msgstr "" #. qzFbg -#: sc/uiconfig/scalc/ui/pastespecial.ui:218 +#: sc/uiconfig/scalc/ui/pastespecial.ui:165 msgctxt "pastespecial|numbers" msgid "_Numbers" msgstr "數字(_N)" #. SCVEu -#: sc/uiconfig/scalc/ui/pastespecial.ui:227 +#: sc/uiconfig/scalc/ui/pastespecial.ui:174 msgctxt "pastespecial|extended_tip|numbers" msgid "Inserts cells containing numbers." msgstr "" +#. BSEWE +#: sc/uiconfig/scalc/ui/pastespecial.ui:185 +msgctxt "pastespecial|text" +msgid "Te_xt" +msgstr "文字(_X)" + +#. JWDk5 +#: sc/uiconfig/scalc/ui/pastespecial.ui:194 +msgctxt "pastespecial|extended_tip|text" +msgid "Inserts cells containing text." +msgstr "" + #. DBaJD -#: sc/uiconfig/scalc/ui/pastespecial.ui:239 +#: sc/uiconfig/scalc/ui/pastespecial.ui:205 msgctxt "pastespecial|datetime" msgid "_Date & time" msgstr "日期和時間(_D)" #. jq6Md -#: sc/uiconfig/scalc/ui/pastespecial.ui:248 +#: sc/uiconfig/scalc/ui/pastespecial.ui:214 msgctxt "pastespecial|extended_tip|datetime" msgid "Inserts cells containing date and time values." msgstr "" -#. MSe4m -#: sc/uiconfig/scalc/ui/pastespecial.ui:260 -msgctxt "pastespecial|formulas" -msgid "_Formulas" -msgstr "公式(_F)" - -#. Na5Ba -#: sc/uiconfig/scalc/ui/pastespecial.ui:269 -msgctxt "pastespecial|extended_tip|formulas" -msgid "Inserts cells containing formulae." -msgstr "" - -#. NT4Am -#: sc/uiconfig/scalc/ui/pastespecial.ui:281 -msgctxt "pastespecial|comments" -msgid "_Comments" -msgstr "評註(_C)" - -#. 3uP7i -#: sc/uiconfig/scalc/ui/pastespecial.ui:290 -msgctxt "pastespecial|extended_tip|comments" -msgid "Inserts comments that are attached to cells. If you want to add the comments to the existing cell content, select the \"Add\" operation." -msgstr "" - #. aHXF8 -#: sc/uiconfig/scalc/ui/pastespecial.ui:302 +#: sc/uiconfig/scalc/ui/pastespecial.ui:225 msgctxt "pastespecial|formats" msgid "For_mats" msgstr "格式(_M)" #. ehyEf -#: sc/uiconfig/scalc/ui/pastespecial.ui:311 +#: sc/uiconfig/scalc/ui/pastespecial.ui:234 msgctxt "pastespecial|extended_tip|formats" msgid "Inserts cell format attributes." msgstr "" -#. Umb86 -#: sc/uiconfig/scalc/ui/pastespecial.ui:323 +#. YZQBh +#: sc/uiconfig/scalc/ui/pastespecial.ui:245 msgctxt "pastespecial|objects" -msgid "_Objects" -msgstr "物件(_O)" +msgid "Ob_jects" +msgstr "" #. DZsnr -#: sc/uiconfig/scalc/ui/pastespecial.ui:332 +#: sc/uiconfig/scalc/ui/pastespecial.ui:254 msgctxt "pastespecial|extended_tip|objects" msgid "Inserts objects contained within the selected cell range. These can be OLE objects, chart objects, or drawing objects." msgstr "" -#. gjnwU -#: sc/uiconfig/scalc/ui/pastespecial.ui:350 +#. jrjYA +#: sc/uiconfig/scalc/ui/pastespecial.ui:265 +msgctxt "pastespecial|formulas" +msgid "F_ormulas" +msgstr "" + +#. Na5Ba +#: sc/uiconfig/scalc/ui/pastespecial.ui:274 +msgctxt "pastespecial|extended_tip|formulas" +msgid "Inserts cells containing formulae." +msgstr "" + +#. UtpWA +#: sc/uiconfig/scalc/ui/pastespecial.ui:289 msgctxt "pastespecial|label1" -msgid "Selection" -msgstr "選取內容" +msgid "Paste" +msgstr "" #. nJiy4 -#: sc/uiconfig/scalc/ui/pastespecial.ui:384 +#: sc/uiconfig/scalc/ui/pastespecial.ui:317 msgctxt "pastespecial|none" msgid "Non_e" msgstr "無(_E)" #. 7GKDG -#: sc/uiconfig/scalc/ui/pastespecial.ui:394 +#: sc/uiconfig/scalc/ui/pastespecial.ui:327 msgctxt "pastespecial|extended_tip|none" msgid "Does not apply an operation when you insert the cell range from the clipboard. The contents of the clipboard will replace existing cell contents." msgstr "" #. CEsbt -#: sc/uiconfig/scalc/ui/pastespecial.ui:406 +#: sc/uiconfig/scalc/ui/pastespecial.ui:339 msgctxt "pastespecial|add" msgid "_Add" msgstr "加(_A)" #. bNyh2 -#: sc/uiconfig/scalc/ui/pastespecial.ui:416 +#: sc/uiconfig/scalc/ui/pastespecial.ui:349 msgctxt "pastespecial|extended_tip|add" msgid "Adds the values in the clipboard cells to the values in the target cells. Also, if the clipboard only contains comments, adds the comments to the target cells." msgstr "" #. iFTvh -#: sc/uiconfig/scalc/ui/pastespecial.ui:428 +#: sc/uiconfig/scalc/ui/pastespecial.ui:361 msgctxt "pastespecial|subtract" msgid "_Subtract" msgstr "減(_S)" #. 2SKbT -#: sc/uiconfig/scalc/ui/pastespecial.ui:438 +#: sc/uiconfig/scalc/ui/pastespecial.ui:371 msgctxt "pastespecial|extended_tip|subtract" msgid "Subtracts the values in the clipboard cells from the values in the target cells." msgstr "" -#. pn4re -#: sc/uiconfig/scalc/ui/pastespecial.ui:450 +#. zdDUB +#: sc/uiconfig/scalc/ui/pastespecial.ui:383 msgctxt "pastespecial|multiply" -msgid "Multipl_y" -msgstr "乘(_Y)" +msgid "_Multiply" +msgstr "" #. jkRDm -#: sc/uiconfig/scalc/ui/pastespecial.ui:460 +#: sc/uiconfig/scalc/ui/pastespecial.ui:393 msgctxt "pastespecial|extended_tip|multiply" msgid "Multiplies the values in the clipboard cells with the values in the target cells." msgstr "" -#. ND3Xd -#: sc/uiconfig/scalc/ui/pastespecial.ui:472 +#. 7Nd8u +#: sc/uiconfig/scalc/ui/pastespecial.ui:405 msgctxt "pastespecial|divide" -msgid "Di_vide" -msgstr "除(_V)" +msgid "_Divide" +msgstr "" #. 9VKdS -#: sc/uiconfig/scalc/ui/pastespecial.ui:482 +#: sc/uiconfig/scalc/ui/pastespecial.ui:415 msgctxt "pastespecial|extended_tip|divide" msgid "Divides the values in the target cells by the values in the clipboard cells." msgstr "" #. 9otLM -#: sc/uiconfig/scalc/ui/pastespecial.ui:500 +#: sc/uiconfig/scalc/ui/pastespecial.ui:431 msgctxt "pastespecial|label2" msgid "Operations" msgstr "運算" -#. FrhGC -#: sc/uiconfig/scalc/ui/pastespecial.ui:534 -msgctxt "pastespecial|skip_empty" -msgid "S_kip empty cells" -msgstr "略過空白儲存格(_K)" - -#. BodqB -#: sc/uiconfig/scalc/ui/pastespecial.ui:538 -msgctxt "pastespecial|skip_empty" -msgid "If enabled, blank cells in source will not override the target." -msgstr "若啟用，則來源中的空白儲存格不會凌駕目標儲存格。" - -#. u2Cms -#: sc/uiconfig/scalc/ui/pastespecial.ui:544 -msgctxt "pastespecial|extended_tip|skip_empty" -msgid "Empty cells from the clipboard do not replace target cells. If you use this option in conjunction with the \"Multiply\" or the \"Divide\" operation, the operation is not applied to the target cell of an empty cell in the clipboard." -msgstr "" - -#. aDeKR -#: sc/uiconfig/scalc/ui/pastespecial.ui:556 -msgctxt "pastespecial|transpose" -msgid "_Transpose" -msgstr "列欄替換(_T)" - -#. P3eE4 -#: sc/uiconfig/scalc/ui/pastespecial.ui:565 -msgctxt "pastespecial|extended_tip|transpose" -msgid "The rows of the range in the clipboard are pasted to become columns of the output range. The columns of the range in the clipboard are pasted to become rows." -msgstr "" - -#. eJ6zh -#: sc/uiconfig/scalc/ui/pastespecial.ui:577 -msgctxt "pastespecial|link" -msgid "_Link" -msgstr "連結(_L)" - -#. Bg9dc -#: sc/uiconfig/scalc/ui/pastespecial.ui:586 -msgctxt "pastespecial|extended_tip|link" -msgid "Inserts the cell range as a link, so that changes made to the cells in the source file are updated in the target file. To ensure that changes made to empty cells in the source file are updated in the target file, ensure that the \"Paste All\" option is also selected." -msgstr "" - -#. HCco8 -#: sc/uiconfig/scalc/ui/pastespecial.ui:604 -msgctxt "pastespecial|label3" -msgid "Options" -msgstr "選項" - #. fonBJ -#: sc/uiconfig/scalc/ui/pastespecial.ui:638 +#: sc/uiconfig/scalc/ui/pastespecial.ui:460 msgctxt "pastespecial|no_shift" msgid "Don't sh_ift" msgstr "不移動(_I)" #. q3Xv3 -#: sc/uiconfig/scalc/ui/pastespecial.ui:648 +#: sc/uiconfig/scalc/ui/pastespecial.ui:470 msgctxt "pastespecial|extended_tip|no_shift" msgid "Inserted cells replace the target cells." msgstr "" -#. 4HpJ2 -#: sc/uiconfig/scalc/ui/pastespecial.ui:660 +#. RuiU6 +#: sc/uiconfig/scalc/ui/pastespecial.ui:482 msgctxt "pastespecial|move_down" -msgid "Do_wn" -msgstr "向下(_W)" +msgid "_Down" +msgstr "" #. BNALN -#: sc/uiconfig/scalc/ui/pastespecial.ui:670 +#: sc/uiconfig/scalc/ui/pastespecial.ui:492 msgctxt "pastespecial|extended_tip|move_down" msgid "Target cells are shifted downward when you insert cells from the clipboard." msgstr "" #. obSAt -#: sc/uiconfig/scalc/ui/pastespecial.ui:682 +#: sc/uiconfig/scalc/ui/pastespecial.ui:504 msgctxt "pastespecial|move_right" msgid "_Right" msgstr "向右(_R)" #. GEFe7 -#: sc/uiconfig/scalc/ui/pastespecial.ui:692 +#: sc/uiconfig/scalc/ui/pastespecial.ui:514 msgctxt "pastespecial|extended_tip|move_right" msgid "Target cells are shifted to the right when you insert cells from the clipboard." msgstr "" #. fzYTm -#: sc/uiconfig/scalc/ui/pastespecial.ui:710 +#: sc/uiconfig/scalc/ui/pastespecial.ui:530 msgctxt "pastespecial|label4" msgid "Shift Cells" msgstr "移動儲存格" +#. diPtG +#: sc/uiconfig/scalc/ui/pastespecial.ui:566 +msgctxt "pastespecial|paste_values_only|label" +msgid "_Values Only" +msgstr "" + +#. XyU8o +#: sc/uiconfig/scalc/ui/pastespecial.ui:570 +msgctxt "pastespecial|paste_values_only|tooltip_text" +msgid "Values Only" +msgstr "僅數值" + +#. CTEKF +#: sc/uiconfig/scalc/ui/pastespecial.ui:584 +msgctxt "pastespecial|paste_values_formats|label" +msgid "Values & _Formats" +msgstr "" + +#. 7GuDi +#: sc/uiconfig/scalc/ui/pastespecial.ui:588 +msgctxt "pastespecial|paste_values_formats|tooltip_text" +msgid "Values & Formats" +msgstr "數值與格式" + +#. Rb8KR +#: sc/uiconfig/scalc/ui/pastespecial.ui:603 +msgctxt "pastespecial|paste_format|label" +msgid "Formats Onl_y" +msgstr "" + +#. Cvyjn +#: sc/uiconfig/scalc/ui/pastespecial.ui:608 +msgctxt "pastespecial|paste_format|tooltip_text" +msgid "Formats Only" +msgstr "" + +#. YGdhH +#: sc/uiconfig/scalc/ui/pastespecial.ui:622 +msgctxt "pastespecial|paste_transpose|label" +msgid "_Transpose All" +msgstr "" + +#. sbLGi +#: sc/uiconfig/scalc/ui/pastespecial.ui:626 +msgctxt "pastespecial|paste_transpose|tooltip_text" +msgid "Transpose All" +msgstr "" + +#. 4ETCT +#: sc/uiconfig/scalc/ui/pastespecial.ui:648 +msgctxt "pastespecial|cbImmediately" +msgid "_Run immediately" +msgstr "" + +#. YD43i +#: sc/uiconfig/scalc/ui/pastespecial.ui:669 +msgctxt "pastespecial|frPresets" +msgid "Presets" +msgstr "" + +#. nuJd9 +#: sc/uiconfig/scalc/ui/pastespecial.ui:699 +msgctxt "pastespecial|link" +msgid "As _Link" +msgstr "" + +#. Bg9dc +#: sc/uiconfig/scalc/ui/pastespecial.ui:708 +msgctxt "pastespecial|extended_tip|link" +msgid "Inserts the cell range as a link, so that changes made to the cells in the source file are updated in the target file. To ensure that changes made to empty cells in the source file are updated in the target file, ensure that the \"Paste All\" option is also selected." +msgstr "" + +#. qt6LA +#: sc/uiconfig/scalc/ui/pastespecial.ui:719 +msgctxt "pastespecial|transpose" +msgid "Trans_pose" +msgstr "" + +#. P3eE4 +#: sc/uiconfig/scalc/ui/pastespecial.ui:728 +msgctxt "pastespecial|extended_tip|transpose" +msgid "The rows of the range in the clipboard are pasted to become columns of the output range. The columns of the range in the clipboard are pasted to become rows." +msgstr "" + +#. eG52z +#: sc/uiconfig/scalc/ui/pastespecial.ui:739 +msgctxt "pastespecial|skip_empty" +msgid "_Skip empty cells" +msgstr "" + +#. BodqB +#: sc/uiconfig/scalc/ui/pastespecial.ui:743 +msgctxt "pastespecial|skip_empty" +msgid "If enabled, blank cells in source will not override the target." +msgstr "若啟用，則來源中的空白儲存格不會凌駕目標儲存格。" + +#. u2Cms +#: sc/uiconfig/scalc/ui/pastespecial.ui:749 +msgctxt "pastespecial|extended_tip|skip_empty" +msgid "Empty cells from the clipboard do not replace target cells. If you use this option in conjunction with the \"Multiply\" or the \"Divide\" operation, the operation is not applied to the target cell of an empty cell in the clipboard." +msgstr "" + +#. jTFAJ +#: sc/uiconfig/scalc/ui/pastespecial.ui:764 +msgctxt "pastespecial|OptionsFrame" +msgid "Options" +msgstr "" + #. ypkML -#: sc/uiconfig/scalc/ui/pastespecial.ui:741 +#: sc/uiconfig/scalc/ui/pastespecial.ui:792 msgctxt "pastespecial|extended_tip|PasteSpecial" msgid "Inserts the contents of the clipboard into the current file in a format that you can specify." msgstr "將剪貼簿上的內容以您可以指定的格式插入到目前的檔案中。" @@ -27104,49 +27235,49 @@ msgid "Opens the Data Field Options dialog. The Options button is visible for co msgstr "開啟 [資料欄位選項] 對話方塊。只有欄、列、或頁欄位可看見 [選項] 按鈕。" #. KBmND -#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:140 +#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:133 msgctxt "pivotfielddialog|none" msgid "_None" msgstr "無(_N)" #. ABmZC -#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:157 +#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:150 msgctxt "pivotfielddialog|auto" msgid "_Automatic" msgstr "自動(_A)" #. mHvW7 -#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:173 +#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:166 msgctxt "pivotfielddialog|user" msgid "_User-defined" msgstr "使用者定義(_U)" #. k2AjG -#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:222 +#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:215 msgctxt "pivotfielddialog|extended_tip|functions" msgid "Click the type of subtotal that you want to calculate. This option is only available if the User-defined option is selected." msgstr "" #. vDXUZ -#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:241 +#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:232 msgctxt "pivotfielddialog|label1" msgid "Subtotals" msgstr "小計" #. cFxft -#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:255 +#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:246 msgctxt "pivotfielddialog|showall" msgid "Show it_ems without data" msgstr "顯示不含資料的項目(_E)" #. 7GAbs -#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:264 +#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:255 msgctxt "pivotfielddialog|extended_tip|showall" msgid "Includes empty columns and rows in the results table." msgstr "" #. aUWEK -#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:283 +#: sc/uiconfig/scalc/ui/pivotfielddialog.ui:274 msgctxt "pivotfielddialog|label2" msgid "Name:" msgstr "名稱：" @@ -27158,181 +27289,181 @@ msgid "Filter" msgstr "篩選" #. BG3Bc -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:108 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:102 msgctxt "pivotfilterdialog|connect1" msgid "AND" msgstr "AND" #. fwPGu -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:109 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:103 msgctxt "pivotfilterdialog|connect1" msgid "OR" msgstr "OR" #. qaU7X -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:116 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:110 msgctxt "pivotfilterdialog|extended_tip|connect1" msgid "Select a logical operator for the filter." msgstr "" #. TW6Uf -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:130 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:124 msgctxt "pivotfilterdialog|connect2" msgid "AND" msgstr "AND" #. 4UZuA -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:131 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:125 msgctxt "pivotfilterdialog|connect2" msgid "OR" msgstr "OR" #. t5VCe -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:135 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:129 msgctxt "pivotfilterdialog|extended_tip|connect2" msgid "Select a logical operator for the filter." msgstr "" #. rDPh7 -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:148 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:142 msgctxt "pivotfilterdialog|label2" msgid "Operator" msgstr "運算子" #. AQC5N -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:159 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:153 msgctxt "pivotfilterdialog|label3" msgid "Field name" msgstr "欄位名稱" #. 5NJCB -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:170 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:164 msgctxt "pivotfilterdialog|label4" msgid "Condition" msgstr "條件" #. nCtXa -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:181 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:175 msgctxt "pivotfilterdialog|label5" msgid "Value" msgstr "值" #. SvnJM -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:197 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:191 msgctxt "pivotfilterdialog|extended_tip|field1" msgid "Select the field that you want to use in the filter. If field names are not available, the column labels are listed." msgstr "" #. mDaxf -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:215 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:209 msgctxt "pivotfilterdialog|extended_tip|field2" msgid "Select the field that you want to use in the filter. If field names are not available, the column labels are listed." msgstr "" #. 3N44y -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:233 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:227 msgctxt "pivotfilterdialog|extended_tip|field3" msgid "Select the field that you want to use in the filter. If field names are not available, the column labels are listed." msgstr "" #. jTLFv -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:259 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:253 msgctxt "pivotfilterdialog|extended_tip|cond1" msgid "Select an operator to compare the Field name and Value entries." msgstr "" #. LW6w7 -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:285 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:279 msgctxt "pivotfilterdialog|extended_tip|cond2" msgid "Select an operator to compare the Field name and Value entries." msgstr "" #. vhSZ7 -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:311 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:305 msgctxt "pivotfilterdialog|extended_tip|cond3" msgid "Select an operator to compare the Field name and Value entries." msgstr "" #. dDii2 -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:337 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:331 msgctxt "pivotfilterdialog|extended_tip|val1" msgid "Select the value that you want to compare to the selected field." msgstr "" #. BiRxu -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:363 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:357 msgctxt "pivotfilterdialog|extended_tip|val2" msgid "Select the value that you want to compare to the selected field." msgstr "" #. oWXWk -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:389 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:383 msgctxt "pivotfilterdialog|extended_tip|val3" msgid "Select the value that you want to compare to the selected field." msgstr "" #. 9X5GC -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:409 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:401 msgctxt "pivotfilterdialog|label1" msgid "Filter Criteria" msgstr "篩選準則" #. ckB2T -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:449 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:441 msgctxt "pivotfilterdialog|case" msgid "_Case sensitive" msgstr "區分字母大小寫(_C)" #. nENeC -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:459 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:451 msgctxt "pivotfilterdialog|extended_tip|case" msgid "Distinguishes between uppercase and lowercase letters." msgstr "" #. ECBBQ -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:470 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:462 msgctxt "pivotfilterdialog|regexp" msgid "Regular _expressions" msgstr "常規表述式(_E)" #. MB4Ab -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:480 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:472 msgctxt "pivotfilterdialog|extended_tip|regexp" msgid "Allows you to use regular expressions in the filter definition." msgstr "允許您在篩選定義中使用萬用字元。" #. cirEo -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:491 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:483 msgctxt "pivotfilterdialog|unique" msgid "_No duplications" msgstr "無重複(_N)" #. QCGpa -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:501 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:493 msgctxt "pivotfilterdialog|extended_tip|unique" msgid "Excludes duplicate rows in the list of filtered data." msgstr "在篩選出的資料清單中排除重複列。" #. GcFuF -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:529 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:521 msgctxt "pivotfilterdialog|dbarealabel" msgid "Data range:" msgstr "資料範圍：" #. inZxG -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:542 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:534 msgctxt "pivotfilterdialog|dbarea" msgid "dummy" msgstr "樣本" #. fFAgZ -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:546 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:538 msgctxt "pivotfilterdialog|extended_tip|dbarea" msgid "Displays the name of the filtered data range in the table." msgstr "" #. SxeCx -#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:567 +#: sc/uiconfig/scalc/ui/pivotfilterdialog.ui:559 msgctxt "pivotfilterdialog|label6" msgid "Op_tions" msgstr "選項(_T)" @@ -27356,235 +27487,235 @@ msgid "Closes dialog and discards all changes." msgstr "" #. dhgK2 -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:164 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:163 msgctxt "pivottablelayoutdialog|label3" msgid "Column Fields:" msgstr "欄的欄位：" #. uxqkM -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:215 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:214 msgctxt "pivottablelayoutdialog|extended_tip|listbox-column" msgid "To define the layout of a pivot table, drag and drop data field buttons onto the Page Fields, Row Fields, Column Fields, and Data Fields areas." msgstr "若要定義樞紐分析表的版面配置，請將資料欄位按鈕拖放至 頁面欄位、列欄位、欄欄位，與 資料欄位 區域上。" #. WWrpy -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:246 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:244 msgctxt "pivottablelayoutdialog|label5" msgid "Data Fields:" msgstr "資料欄位：" #. DforL -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:297 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:295 msgctxt "pivottablelayoutdialog|extended_tip|listbox-data" msgid "To define the layout of a pivot table, drag and drop data field buttons onto the Page Fields, Row Fields, Column Fields, and Data Fields areas." msgstr "若要定義樞紐分析表的版面配置，請將資料欄位按鈕拖放至 頁面欄位、列欄位、欄欄位，與 資料欄位 區域上。" #. BhTuC -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:328 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:325 msgctxt "pivottablelayoutdialog|label4" msgid "Row Fields:" msgstr "列的欄位：" #. vsPty -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:377 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:374 msgctxt "pivottablelayoutdialog|extended_tip|listbox-row" msgid "To define the layout of a pivot table, drag and drop data field buttons onto the Page Fields, Row Fields, Column Fields, and Data Fields areas." msgstr "若要定義樞紐分析表的版面配置，請將資料欄位按鈕拖放至 頁面欄位、列欄位、欄欄位，與 資料欄位 區域上。" #. 4XvEh -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:408 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:404 msgctxt "pivottablelayoutdialog|label2" msgid "Filters:" msgstr "篩選器：" #. 9M3jG -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:459 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:455 msgctxt "pivottablelayoutdialog|extended_tip|listbox-page" msgid "To define the layout of a pivot table, drag and drop data field buttons onto the Page Fields, Row Fields, Column Fields, and Data Fields areas." msgstr "若要定義樞紐分析表的版面配置，請將資料欄位按鈕拖放至 頁面欄位、列欄位、欄欄位，與 資料欄位 區域上。" #. Scoht -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:496 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:517 msgctxt "pivottablelayoutdialog|label1" msgid "Available Fields:" msgstr "可用欄位：" #. ZkDd9 -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:546 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:567 msgctxt "pivottablelayoutdialog|extended_tip|listbox-fields" msgid "To define the layout of a pivot table, drag and drop data field buttons onto the Page Fields, Row Fields, Column Fields, and Data Fields areas." msgstr "若要定義樞紐分析表的版面配置，請將資料欄位按鈕拖放至 頁面欄位、列欄位、欄欄位，與 資料欄位 區域上。" #. BL7Ff -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:577 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:598 msgctxt "pivottablelayoutdialog|label6" msgid "Drag the Items into the Desired Position" msgstr "將項目拖曳至所要的位置上" #. 9EpNA -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:605 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:626 msgctxt "pivottablelayoutdialog|check-ignore-empty-rows" msgid "Ignore empty rows" msgstr "忽略空白列" #. CAJBa -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:614 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:635 msgctxt "pivottablelayoutdialog|extended_tip|check-ignore-empty-rows" msgid "Ignores empty fields in the data source." msgstr "忽略資料來源中的空欄位。" #. jgyea -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:625 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:646 msgctxt "pivottablelayoutdialog|check-identify-categories" msgid "Identify categories" msgstr "識別類別" #. uzKL8 -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:634 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:655 msgctxt "pivottablelayoutdialog|extended_tip|check-identify-categories" msgid "Automatically assigns rows without labels to the category of the row above." msgstr "自動將無標籤的列指定為上一列的種類。" #. U6pzh -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:645 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:666 msgctxt "pivottablelayoutdialog|check-total-rows" msgid "Total rows" msgstr "總列數" #. FdXjF -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:654 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:675 msgctxt "pivottablelayoutdialog|extended_tip|check-total-rows" msgid "Calculates and displays the grand total of the row calculation." msgstr "計算並顯示列計算的總計。" #. Br8BE -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:665 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:686 msgctxt "pivottablelayoutdialog|check-total-columns" msgid "Total columns" msgstr "總欄數" #. DEFgB -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:674 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:695 msgctxt "pivottablelayoutdialog|extended_tip|check-total-columns" msgid "Calculates and displays the grand total of the column calculation." msgstr "計算並顯示欄計算的總計。" #. VXEdh -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:685 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:706 msgctxt "pivottablelayoutdialog|check-add-filter" msgid "Add filter" msgstr "加入篩選" #. TEUXm -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:694 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:715 msgctxt "pivottablelayoutdialog|extended_tip|check-add-filter" msgid "Adds a Filter button to pivot tables that are based on spreadsheet data." msgstr "加入 [篩選器] 按鈕至建基於試算表資料的樞紐分析表。" #. ud4H8 -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:705 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:726 msgctxt "pivottablelayoutdialog|check-drill-to-details" msgid "Enable drill to details" msgstr "啟用詳細資訊探測" #. EVPJi -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:714 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:735 msgctxt "pivottablelayoutdialog|extended_tip|check-drill-to-details" msgid "Select this check box and double-click an item label in the table to show or hide details for the item. Clear this check box and double-click a cell in the table to edit the contents of the cell." msgstr "選取此核取方塊，然後連按兩下表格中的項目標籤，以顯示或隱藏該項目的細節。清除此核取方塊，連按兩下表格中的儲存格，以編輯該儲存格的內容。" #. iFA3A -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:729 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:750 msgctxt "pivottablelayoutdialog|label11" msgid "Options" msgstr "選項" #. LevDB -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:781 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:798 msgctxt "pivottablelayoutdialog|destination-radio-new-sheet" msgid "New sheet" msgstr "新增工作表" #. Ld2sG -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:798 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:815 msgctxt "pivottablelayoutdialog|destination-radio-selection" msgid "Selection" msgstr "選取內容" #. A9WmF -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:819 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:836 msgctxt "pivottablelayoutdialog|extended_tip|destination-edit" msgid "Select the area where you want to display the results of the pivot table." msgstr "選取您想要用來顯示樞紐分析表結果的區域。" #. WEQjx -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:835 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:852 msgctxt "pivottablelayoutdialog|extended_tip|destination-button" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. LBRZw -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:850 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:867 msgctxt "pivottablelayoutdialog|extended_tip|destination-list" msgid "Select the area where you want to display the results of the pivot table." msgstr "選取您想要用來顯示樞紐分析表結果的區域。" #. UjyGK -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:862 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:879 msgctxt "pivottablelayoutdialog|destination-radio-named-range" msgid "Named range" msgstr "命名的範圍" #. xhpiB -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:884 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:899 msgctxt "pivottablelayoutdialog|label8" msgid "Destination" msgstr "目的地" #. yDG3C -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:919 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:930 msgctxt "pivottablelayoutdialog|source-radio-selection" msgid "Selection" msgstr "選取內容" #. AkQEw -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:941 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:952 msgctxt "pivottablelayoutdialog|extended_tip|source-edit" msgid "Select the area that contains the data for the current pivot table." msgstr "為目前的樞紐分析表選取包含資料的區域。" #. uq7zD -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:957 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:968 msgctxt "pivottablelayoutdialog|extended_tip|source-button" msgid "Select the area that contains the data for the current pivot table." msgstr "為目前的樞紐分析表選取包含資料的區域。" #. 6s5By -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:968 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:979 msgctxt "pivottablelayoutdialog|source-radio-named-range" msgid "Named range" msgstr "命名的範圍" #. QTYpg -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:1001 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:1010 msgctxt "pivottablelayoutdialog|label9" msgid "Source" msgstr "來源" #. daE6g -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:1019 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:1028 msgctxt "pivottablelayoutdialog|label7" msgid "Source and Destination" msgstr "來源與目的地" #. WUqGN -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:1028 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:1037 msgctxt "pivottablelayoutdialog|extended_tip|more" msgid "Displays or hides additional options for defining the pivot table." msgstr "顯示或隱藏定義樞紐分析表的額外選項。" #. rSsEg -#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:1054 +#: sc/uiconfig/scalc/ui/pivottablelayoutdialog.ui:1063 msgctxt "pivottablelayoutdialog|extended_tip|PivotTableLayout" msgid "Specify the layout of the table that is generated by the pivot table." msgstr "指定樞紐分析表要產生的表格其版面配置。" @@ -27608,139 +27739,139 @@ msgid "Closes dialog and discards all changes." msgstr "" #. DrnyM -#: sc/uiconfig/scalc/ui/printareasdialog.ui:124 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:119 msgctxt "printareasdialog|extended_tip|rbprintarea" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. 6nt5h -#: sc/uiconfig/scalc/ui/printareasdialog.ui:142 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:137 msgctxt "printareasdialog|extended_tip|edprintarea" msgid "Allows you to modify a defined print range." msgstr "允許您修改已定義的列印範圍。" #. ED3qW -#: sc/uiconfig/scalc/ui/printareasdialog.ui:156 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:151 msgctxt "printareasdialog|lbprintarea" msgid "- none -" msgstr "- 無 -" #. q6nvt -#: sc/uiconfig/scalc/ui/printareasdialog.ui:157 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:152 msgctxt "printareasdialog|lbprintarea" msgid "- entire sheet -" msgstr "- 整張工作表 -" #. jpkBC -#: sc/uiconfig/scalc/ui/printareasdialog.ui:158 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:153 msgctxt "printareasdialog|lbprintarea" msgid "- user defined -" msgstr "- 使用者定義 -" #. aBLgV -#: sc/uiconfig/scalc/ui/printareasdialog.ui:159 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:154 msgctxt "printareasdialog|lbprintarea" msgid "- selection -" msgstr "- 選取範圍 -" #. SFHa4 -#: sc/uiconfig/scalc/ui/printareasdialog.ui:163 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:158 msgctxt "printareasdialog|extended_tip|lbprintarea" msgid "Allows you to modify a defined print range." msgstr "允許您修改已定義的列印範圍。" #. frRTf -#: sc/uiconfig/scalc/ui/printareasdialog.ui:180 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:173 msgctxt "printareasdialog|label1" msgid "Print Range" msgstr "列印範圍" #. eySzA -#: sc/uiconfig/scalc/ui/printareasdialog.ui:224 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:212 msgctxt "printareasdialog|extended_tip|edrepeatrow" msgid "Choose one or more rows to print on every page. In the right text box enter the row reference, for example, \"1\" or \"$1\" or \"$2:$3\"." msgstr "選擇要列印於每一頁上的一列或多列。在右側的文字方塊中輸入列參照，例如「1」或「$1」或「$2:$3」。" #. J22Vh -#: sc/uiconfig/scalc/ui/printareasdialog.ui:243 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:231 msgctxt "printareasdialog|extended_tip|rbrepeatrow" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. XqwBA -#: sc/uiconfig/scalc/ui/printareasdialog.ui:257 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:245 msgctxt "printareasdialog|lbrepeatrow" msgid "- none -" msgstr "- 無 -" #. Ya4kd -#: sc/uiconfig/scalc/ui/printareasdialog.ui:258 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:246 msgctxt "printareasdialog|lbrepeatrow" msgid "- user defined -" msgstr "- 使用者定義 -" #. fmxFD -#: sc/uiconfig/scalc/ui/printareasdialog.ui:262 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:250 msgctxt "printareasdialog|extended_tip|lbrepeatrow" msgid "Choose one or more rows to print on every page. In the right text box enter the row reference, for example, \"1\" or \"$1\" or \"$2:$3\"." msgstr "選擇要列印於每一頁上的一列或多列。在右側的文字方塊中輸入列參照，例如「1」或「$1」或「$2:$3」。" #. EFCSq -#: sc/uiconfig/scalc/ui/printareasdialog.ui:279 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:265 msgctxt "printareasdialog|label2" msgid "Rows to Repeat" msgstr "要重複的列" #. GNLBq -#: sc/uiconfig/scalc/ui/printareasdialog.ui:323 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:304 msgctxt "printareasdialog|extended_tip|edrepeatcol" msgid "Choose one or more columns to print on every page. In the right text box enter the column reference, for example, \"A\" or \"AB\" or \"$C:$E\"." msgstr "選擇要在每一頁上列印的一欄或多欄。在右側的文字方塊中輸入欄參照，例如 \"A\" 或 \"AB\" 或 \"$C:$E\"。" #. MG6GD -#: sc/uiconfig/scalc/ui/printareasdialog.ui:342 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:323 msgctxt "printareasdialog|extended_tip|rbrepeatcol" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. bKSEJ -#: sc/uiconfig/scalc/ui/printareasdialog.ui:356 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:337 msgctxt "printareasdialog|lbrepeatcol" msgid "- none -" msgstr "- 無 -" #. DnrZP -#: sc/uiconfig/scalc/ui/printareasdialog.ui:357 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:338 msgctxt "printareasdialog|lbrepeatcol" msgid "- user defined -" msgstr "- 使用者定義 -" #. vhTpH -#: sc/uiconfig/scalc/ui/printareasdialog.ui:361 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:342 msgctxt "printareasdialog|extended_tip|lbrepeatcol" msgid "Choose one or more columns to print on every page. In the right text box enter the column reference, for example, \"A\" or \"AB\" or \"$C:$E\"." msgstr "選擇要在每一頁上列印的一欄或多欄。在右側的文字方塊中輸入欄參照，例如 \"A\" 或 \"AB\" 或 \"$C:$E\"。" #. Ushqp -#: sc/uiconfig/scalc/ui/printareasdialog.ui:378 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:357 msgctxt "printareasdialog|label3" msgid "Columns to Repeat" msgstr "要重複的欄" #. jpB5m -#: sc/uiconfig/scalc/ui/printareasdialog.ui:410 +#: sc/uiconfig/scalc/ui/printareasdialog.ui:389 msgctxt "printareasdialog|extended_tip|PrintAreasDialog" msgid "Opens a dialog where you can specify the print range." msgstr "開啟一個對話方塊，您可以在其中指定列印範圍。" #. 4tC5Y -#: sc/uiconfig/scalc/ui/printeroptions.ui:25 +#: sc/uiconfig/scalc/ui/printeroptions.ui:19 msgctxt "printeroptions|suppressemptypages" msgid "Suppress output of empty pages" msgstr "不列印空白頁面" #. tkryr -#: sc/uiconfig/scalc/ui/printeroptions.ui:40 +#: sc/uiconfig/scalc/ui/printeroptions.ui:34 msgctxt "printeroptions|label6" msgid "Pages" msgstr "頁面" @@ -27830,163 +27961,163 @@ msgid "Random Number Generator" msgstr "隨機數生成器" #. EG6VJ -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:137 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:133 msgctxt "randomnumbergenerator|cell-range-label" msgid "Cell range:" msgstr "儲存格範圍：" #. L25fm -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:158 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:154 msgctxt "randomnumbergenerator|extended_tip|cell-range-edit" msgid "Define the range of cells to fill with random numbers. If you have previously selected a range, it will be displayed here." msgstr "" #. Jy5mE -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:188 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:182 msgctxt "randomnumbergenerator|label1" msgid "Data" msgstr "資料" #. fHkms -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:226 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:216 msgctxt "randomnumbergenerator|distribution-label" msgid "Distribution:" msgstr "分布：" #. A75xG -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:243 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:233 msgctxt "randomnumbergenerator|distribution-liststore" msgid "Uniform" msgstr "均勻" #. 6GmrH -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:244 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:234 msgctxt "randomnumbergenerator|distribution-liststore" msgid "Uniform Integer" msgstr "均勻整數" #. 5KkJA -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:245 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:235 msgctxt "randomnumbergenerator|distribution-liststore" msgid "Normal" msgstr "常態" #. cZv7T -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:246 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:236 msgctxt "randomnumbergenerator|distribution-liststore" msgid "Cauchy" msgstr "柯西" #. 7ugzB -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:247 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:237 msgctxt "randomnumbergenerator|distribution-liststore" msgid "Bernoulli" msgstr "白努利" #. 98xyT -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:248 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:238 msgctxt "randomnumbergenerator|distribution-liststore" msgid "Binomial" msgstr "二項" #. NBPGN -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:249 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:239 msgctxt "randomnumbergenerator|distribution-liststore" msgid "Chi Squared" msgstr "卡方" #. D4e83 -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:250 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:240 msgctxt "randomnumbergenerator|distribution-liststore" msgid "Geometric" msgstr "幾何" #. YNHUc -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:251 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:241 msgctxt "randomnumbergenerator|distribution-liststore" msgid "Negative Binomial" msgstr "負二項" #. sAgsR -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:255 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:245 msgctxt "randomnumbergenerator|extended_tip|distribution-combo" msgid "The distribution function for the random number generator." msgstr "" #. vMADv -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:269 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:259 msgctxt "randomnumbergenerator|parameter1-label" msgid "..." msgstr "..." #. wVpC6 -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:284 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:274 msgctxt "randomnumbergenerator|parameter2-label" msgid "..." msgstr "..." #. mgEe5 -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:333 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:321 msgctxt "randomnumbergenerator|label2" msgid "Random Number Generator" msgstr "隨機數生成器" #. DAFgG -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:369 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:353 msgctxt "randomnumbergenerator|enable-seed-check" msgid "Enable custom seed" msgstr "啟用自訂種子" #. bToRW -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:378 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:362 msgctxt "randomnumbergenerator|extended_tip|enable-seed-check" msgid "Set the initial value of the random number generator to a known value Seed." msgstr "" #. Tx5oq -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:393 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:377 msgctxt "randomnumbergenerator|seed-label" msgid "Seed:" msgstr "種子：" #. sB7kk -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:412 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:396 msgctxt "randomnumbergenerator|extended_tip|seed-spin" msgid "Value set to initiate the random number generator algorithm. It is used to initialize (seed) the random number generator in order to reproduce the same sequence of pseudorandom numbers. Specify a positive integer number (1, 2, ...) to produce a specific sequence, or leave the field blank if you don't need this particular feature." msgstr "" #. sEjpT -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:423 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:407 msgctxt "randomnumbergenerator|enable-rounding-check" msgid "Enable rounding" msgstr "啟用捨入" #. 8n4v9 -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:432 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:416 msgctxt "randomnumbergenerator|extended_tip|enable-rounding-check" msgid "Truncate the number to a given number of Decimal Places." msgstr "" #. nRvWV -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:448 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:432 msgctxt "randomnumbergenerator|decimal-places-label" msgid "Decimal places:" msgstr "小數點位數：" #. Pdt9C -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:469 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:453 msgctxt "randomnumbergenerator|extended_tip|decimal-places-spin" msgid "Number of decimal places of the numbers generated." msgstr "" #. FTBJB -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:486 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:468 msgctxt "randomnumbergenerator|label4" msgid "Options" msgstr "選項" #. JAk8A -#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:512 +#: sc/uiconfig/scalc/ui/randomnumbergenerator.ui:494 msgctxt "randomnumbergenerator|extended_tip|RandomNumberGeneratorDialog" msgid "Populate a cell range with automatically generated pseudo random numbers with the selected distribution function and its parameters." msgstr "" @@ -28004,103 +28135,103 @@ msgid "Regression" msgstr "迴歸分析" #. NuoZN -#: sc/uiconfig/scalc/ui/regressiondialog.ui:106 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:102 msgctxt "regressiondialog|variable1-range-label" msgid "Independent variable(s) (X) range:" msgstr "獨立變數 (X) 範圍：" #. NGXXg -#: sc/uiconfig/scalc/ui/regressiondialog.ui:145 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:141 msgctxt "regressiondialog|variable2-range-label" msgid "Dependent variable (Y) range:" msgstr "依賴變數 (Y) 範圍：" #. SougG -#: sc/uiconfig/scalc/ui/regressiondialog.ui:182 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:178 msgctxt "regressiondialog|withlabels-check" msgid "Both X and Y ranges have labels" msgstr "X 和 Y 範圍兩者皆有標籤" #. YKUpg -#: sc/uiconfig/scalc/ui/regressiondialog.ui:199 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:195 msgctxt "regressiondialog|output-range-label" msgid "Results to:" msgstr "結果為：" #. ngLrg -#: sc/uiconfig/scalc/ui/regressiondialog.ui:242 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:236 msgctxt "regressiondialog|label1" msgid "Data" msgstr "資料" #. vTmkj -#: sc/uiconfig/scalc/ui/regressiondialog.ui:278 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:268 msgctxt "regressiondialog|groupedby-columns-radio" msgid "Columns" msgstr "欄" #. A8787 -#: sc/uiconfig/scalc/ui/regressiondialog.ui:294 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:284 msgctxt "regressiondialog|groupedby-rows-radio" msgid "Rows" msgstr "列" #. zzc9a -#: sc/uiconfig/scalc/ui/regressiondialog.ui:316 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:304 msgctxt "regressiondialog|label2" msgid "Grouped by" msgstr "分組依據" #. t5Lm2 -#: sc/uiconfig/scalc/ui/regressiondialog.ui:352 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:336 msgctxt "regressiondialog|linear-radio" msgid "Linear Regression" msgstr "線性迴歸" #. bC6dH -#: sc/uiconfig/scalc/ui/regressiondialog.ui:369 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:353 msgctxt "regressiondialog|logarithmic-radio" msgid "Logarithmic Regression" msgstr "對數迴歸" #. fSEJF -#: sc/uiconfig/scalc/ui/regressiondialog.ui:386 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:370 msgctxt "regressiondialog|power-radio" msgid "Power Regression" msgstr "乘冪迴歸" #. nhcJV -#: sc/uiconfig/scalc/ui/regressiondialog.ui:409 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:391 msgctxt "regressiondialog|label3" msgid "Output Regression Types" msgstr "輸出的迴歸類型" #. W98uM -#: sc/uiconfig/scalc/ui/regressiondialog.ui:446 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:424 msgctxt "regressiondialog|label5" msgid "Confidence level" msgstr "信賴水準" #. pB2GA -#: sc/uiconfig/scalc/ui/regressiondialog.ui:456 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:434 msgctxt "regressiondialog|calcresiduals-check" msgid "Calculate residuals" msgstr "計算殘差" #. EuJeA -#: sc/uiconfig/scalc/ui/regressiondialog.ui:488 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:466 msgctxt "regressiondialog|nointercept-check" msgid "Force intercept to be zero" msgstr "強迫截距為零" #. ieBEk -#: sc/uiconfig/scalc/ui/regressiondialog.ui:507 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:483 msgctxt "regressiondialog|label4" msgid "Options" msgstr "選項" #. LU6He -#: sc/uiconfig/scalc/ui/regressiondialog.ui:545 +#: sc/uiconfig/scalc/ui/regressiondialog.ui:521 msgctxt "regressiondialog|extended_tip|RegressionDialog" msgid "Produces the regression analysis of a data set" msgstr "" @@ -28142,25 +28273,25 @@ msgid "The document you are about to export has one or more protected items with msgstr "您要匯出的文件有一項或多項受密碼保護的項目而無法匯出。請重新輸入您的密碼以匯出您的文件。" #. DGfRA -#: sc/uiconfig/scalc/ui/retypepassdialog.ui:128 +#: sc/uiconfig/scalc/ui/retypepassdialog.ui:124 msgctxt "retypepassdialog|docStatusLabel" msgid "Status unknown" msgstr "狀態不明" #. FvCNA -#: sc/uiconfig/scalc/ui/retypepassdialog.ui:138 +#: sc/uiconfig/scalc/ui/retypepassdialog.ui:134 msgctxt "retypepassdialog|retypeDocButton" msgid "_Re-type" msgstr "重新輸入(_R)" #. gdBXs -#: sc/uiconfig/scalc/ui/retypepassdialog.ui:158 +#: sc/uiconfig/scalc/ui/retypepassdialog.ui:152 msgctxt "retypepassdialog|label2" msgid "Document Protection" msgstr "" #. TriyK -#: sc/uiconfig/scalc/ui/retypepassdialog.ui:221 +#: sc/uiconfig/scalc/ui/retypepassdialog.ui:207 msgctxt "retypepassdialog|label3" msgid "Sheet Protection" msgstr "" @@ -28178,25 +28309,25 @@ msgid "Re-type password" msgstr "重新輸入密碼" #. ZPR7e -#: sc/uiconfig/scalc/ui/retypepassworddialog.ui:149 +#: sc/uiconfig/scalc/ui/retypepassworddialog.ui:144 msgctxt "retypepassworddialog|label4" msgid "Pa_ssword:" msgstr "密碼(_S)：" #. VgQFk -#: sc/uiconfig/scalc/ui/retypepassworddialog.ui:163 +#: sc/uiconfig/scalc/ui/retypepassworddialog.ui:158 msgctxt "retypepassworddialog|label5" msgid "Confi_rm:" msgstr "確認(_R)：" #. DrKUe -#: sc/uiconfig/scalc/ui/retypepassworddialog.ui:175 +#: sc/uiconfig/scalc/ui/retypepassworddialog.ui:170 msgctxt "retypepassworddialog|mustmatch" msgid "New password must match the original password" msgstr "新密碼必須與原始密碼相符" #. dQLVG -#: sc/uiconfig/scalc/ui/retypepassworddialog.ui:200 +#: sc/uiconfig/scalc/ui/retypepassworddialog.ui:193 msgctxt "retypepassworddialog|removepassword" msgid "Remove password from this protected item" msgstr "從這個受保護的項目移除密碼" @@ -28268,67 +28399,67 @@ msgid "Sampling" msgstr "取樣" #. E5wq9 -#: sc/uiconfig/scalc/ui/samplingdialog.ui:113 +#: sc/uiconfig/scalc/ui/samplingdialog.ui:109 msgctxt "samplingdialog|input-range-label" msgid "Input range:" msgstr "輸入範圍：" #. GPDR3 -#: sc/uiconfig/scalc/ui/samplingdialog.ui:152 +#: sc/uiconfig/scalc/ui/samplingdialog.ui:148 msgctxt "samplingdialog|output-range-label" msgid "Results to:" msgstr "結果為：" #. GD2H5 -#: sc/uiconfig/scalc/ui/samplingdialog.ui:195 +#: sc/uiconfig/scalc/ui/samplingdialog.ui:189 msgctxt "samplingdialog|label4" msgid "Data" msgstr "資料" #. Hg3d9 -#: sc/uiconfig/scalc/ui/samplingdialog.ui:251 +#: sc/uiconfig/scalc/ui/samplingdialog.ui:240 msgctxt "samplingdialog|label1" msgid "Sample size:" msgstr "樣本大小：" #. wF3ky -#: sc/uiconfig/scalc/ui/samplingdialog.ui:264 +#: sc/uiconfig/scalc/ui/samplingdialog.ui:253 msgctxt "samplingdialog|random-method-radio" msgid "Random" msgstr "隨機" #. ug6Sn -#: sc/uiconfig/scalc/ui/samplingdialog.ui:281 +#: sc/uiconfig/scalc/ui/samplingdialog.ui:270 msgctxt "samplingdialog|periodic-method-radio" msgid "Periodic" msgstr "週期" #. xNEnn -#: sc/uiconfig/scalc/ui/samplingdialog.ui:318 +#: sc/uiconfig/scalc/ui/samplingdialog.ui:306 msgctxt "samplingdialog|label3" msgid "Period:" msgstr "週期：" #. FkbDr -#: sc/uiconfig/scalc/ui/samplingdialog.ui:330 +#: sc/uiconfig/scalc/ui/samplingdialog.ui:318 msgctxt "samplingdialog|with-replacement" msgid "With replacement" msgstr "取出後放回" #. kmvMk -#: sc/uiconfig/scalc/ui/samplingdialog.ui:346 +#: sc/uiconfig/scalc/ui/samplingdialog.ui:334 msgctxt "samplingdialog|keep-order" msgid "Keep order" msgstr "維持順序" #. PdUup -#: sc/uiconfig/scalc/ui/samplingdialog.ui:368 +#: sc/uiconfig/scalc/ui/samplingdialog.ui:354 msgctxt "samplingdialog|label2" msgid "Sampling Method" msgstr "取樣方法" #. nXCVg -#: sc/uiconfig/scalc/ui/samplingdialog.ui:393 +#: sc/uiconfig/scalc/ui/samplingdialog.ui:379 msgctxt "samplingdialog|extended_tip|SamplingDialog" msgid "Create a table with data sampled from another table." msgstr "" @@ -28340,110 +28471,110 @@ msgid "Create Scenario" msgstr "建立分析藍本" #. DiwkC -#: sc/uiconfig/scalc/ui/scenariodialog.ui:109 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:103 msgctxt "scenariodialog|extended_tip|name" msgid "Defines the name for the scenario. Use a clear and unique name so you can easily identify the scenario." msgstr "" #. xwJe3 -#: sc/uiconfig/scalc/ui/scenariodialog.ui:120 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:112 msgctxt "scenariodialog|label1" msgid "Name of Scenario" msgstr "分析藍本的名稱" #. GBB6Y -#: sc/uiconfig/scalc/ui/scenariodialog.ui:169 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:156 msgctxt "scenariodialog|extended_tip|comment" msgid "Specifies additional information about the scenario. This information will be displayed in the Navigator when you click the Scenarios icon and select the desired scenario." msgstr "" #. X9GgG -#: sc/uiconfig/scalc/ui/scenariodialog.ui:184 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:169 msgctxt "scenariodialog|label2" msgid "Comment" msgstr "評註" #. GcXCj -#: sc/uiconfig/scalc/ui/scenariodialog.ui:219 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:199 msgctxt "scenariodialog|copyback" msgid "Copy _back" msgstr "複製回來(_B)" #. AFrxj -#: sc/uiconfig/scalc/ui/scenariodialog.ui:228 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:208 msgctxt "scenariodialog|extended_tip|copyback" msgid "Copies the values of cells that you change into the active scenario. If you do not select this option, the scenario is not changed when you change cell values. The behavior of the Copy back setting depends on the cell protection, the sheet protection, and the Prevent changes settings." msgstr "複製您變更至使用中分析藍本的儲存格值。如果您未選取此選項，變更儲存格值時分析藍本不會變更。[複製回來] 設定的行為取決於儲存格保護、試算表保護與 [避免變更] 的設定。" #. RZHB9 -#: sc/uiconfig/scalc/ui/scenariodialog.ui:239 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:219 msgctxt "scenariodialog|copysheet" msgid "Copy _entire sheet" msgstr "複製整份工作表(_E)" #. awzT2 -#: sc/uiconfig/scalc/ui/scenariodialog.ui:248 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:228 #, fuzzy msgctxt "scenariodialog|extended_tip|copysheet" msgid "Copies the entire sheet into an additional scenario sheet." msgstr "將整個試算表複製到其他分析藍本試算表中。 " #. DxHKD -#: sc/uiconfig/scalc/ui/scenariodialog.ui:259 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:239 msgctxt "scenariodialog|preventchanges" msgid "_Prevent changes" msgstr "防止更動(_P)" #. QJLrA -#: sc/uiconfig/scalc/ui/scenariodialog.ui:268 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:248 msgctxt "scenariodialog|extended_tip|preventchanges" msgid "Prevents changes to the active scenario. The behavior of the Copy back setting depends on the cell protection, the sheet protection, and the Prevent changes settings." msgstr "避免變更使用中的分析藍本。[複製回來] 設定的行為取決於儲存格保護、試算表保護與 [避免變更] 的設定。" #. 6xvMR -#: sc/uiconfig/scalc/ui/scenariodialog.ui:285 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:265 msgctxt "scenariodialog|showframe" msgid "_Display border" msgstr "顯示邊框(_D)" #. NuN3J -#: sc/uiconfig/scalc/ui/scenariodialog.ui:297 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:277 msgctxt "scenariodialog|extended_tip|showframe" msgid "Highlights the scenario in your table with a border. The color for the border is specified in the field to the right of this option." msgstr "" #. cTLu7 -#: sc/uiconfig/scalc/ui/scenariodialog.ui:322 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:302 msgctxt "scenariodialog|extended_tip|bordercolor" msgid "Highlights the scenario in your table with a border. The color for the border is specified in the field to the right of this option." msgstr "" #. R8AVm -#: sc/uiconfig/scalc/ui/scenariodialog.ui:345 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:323 msgctxt "scenariodialog|label3" msgid "Settings" msgstr "設定" #. RGGkM -#: sc/uiconfig/scalc/ui/scenariodialog.ui:361 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:339 msgctxt "scenariodialog|alttitle" msgid "Edit Scenario" msgstr "編輯分析藍本" #. L3X5A -#: sc/uiconfig/scalc/ui/scenariodialog.ui:378 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:356 msgctxt "scenariodialog|createdft" msgid "Created by" msgstr "作者" #. 6uiPw -#: sc/uiconfig/scalc/ui/scenariodialog.ui:389 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:367 msgctxt "scenariodialog|onft" msgid "on" msgstr "時間" #. RrSE3 -#: sc/uiconfig/scalc/ui/scenariodialog.ui:421 +#: sc/uiconfig/scalc/ui/scenariodialog.ui:399 msgctxt "scenariodialog|extended_tip|ScenarioDialog" msgid "Defines a scenario for the selected sheet area." msgstr "" @@ -28473,193 +28604,193 @@ msgid "Opens the Edit scenario dialog, where you can edit the scenario propertie msgstr "" #. Hi3gG -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:41 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:37 msgctxt "scgeneralpage|label4" msgid "Measurement _unit:" msgstr "定量單位(_U)：" #. qfwjd -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:55 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:51 msgctxt "scgeneralpage|label5" msgid "_Tab stops:" msgstr "定位落點(_T)：" #. akEMb -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:73 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:69 msgctxt "extended_tip|tabmf" msgid "Defines the tab stops distance." msgstr "" #. iwwhu -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:88 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:84 msgctxt "extended_tip|unitlb" msgid "Defines the unit of measure in spreadsheets." msgstr "" #. zzQpA -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:105 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:99 msgctxt "scgeneralpage|label1" msgid "Metrics" msgstr "字型尺度" #. ZbcRD -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:138 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:128 msgctxt "scgeneralpage|alwaysrb" msgid "_Always (from trusted locations)" msgstr "總是 (取自信任的位置)(_A)" #. 3baZU -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:155 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:145 msgctxt "scgeneralpage|requestrb" msgid "_On request" msgstr "根據要求(_O)" #. AESok -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:173 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:163 msgctxt "scgeneralpage|neverrb" msgid "_Never" msgstr "永不(_N)" #. GDxLR -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:197 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:185 msgctxt "scgeneralpage|label6" msgid "Update links when opening" msgstr "開啟檔案時更新連結" #. GGhDQ -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:232 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:216 msgctxt "scgeneralpage|editmodecb" msgid "Press Enter to switch to _edit mode" msgstr "按下 Enter 鍵切換至編輯模式(_E)" #. qVJpA -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:241 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:225 msgctxt "extended_tip|editmodecb" msgid "Allows you to immediately edit the selected cell after pressing the Enter key." msgstr "" #. zzFGH -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:253 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:237 msgctxt "scgeneralpage|formatcb" msgid "Expand _formatting" msgstr "擴展格式設定(_F)" #. 8fqgH -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:262 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:246 msgctxt "extended_tip|formatcb" msgid "Specifies whether to automatically apply the formatting attributes of the selected cell to the empty adjacent cells." msgstr "" #. AzkVC -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:274 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:258 msgctxt "scgeneralpage|exprefcb" msgid "Expand _references when new columns/rows are inserted" msgstr "當插入欄/列時擴展參照(_R)" #. yybGX -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:283 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:267 msgctxt "extended_tip|exprefcb" msgid "Specifies whether to expand references when inserting columns or rows adjacent to the reference range. This is only possible if the reference range, where the column or row is inserted, originally spanned at least two cells in the desired direction." msgstr "" #. 6oRpB -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:300 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:284 msgctxt "scgeneralpage|alignlb" msgid "Down" msgstr "下" #. tC8Do -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:301 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:285 msgctxt "scgeneralpage|alignlb" msgid "Right" msgstr "右" #. AAUJ2 -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:302 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:286 msgctxt "scgeneralpage|alignlb" msgid "Up" msgstr "上" #. p9JAq -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:303 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:287 msgctxt "scgeneralpage|alignlb" msgid "Left" msgstr "左" #. 2dTCJ -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:307 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:291 msgctxt "extended_tip|alignlb" msgid "Determines the direction that the cursor in the spreadsheet will move after you press the Enter key." msgstr "" #. dnDdz -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:318 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:302 msgctxt "scgeneralpage|aligncb" msgid "Press Enter to _move selection" msgstr "按下 Enter 鍵移動選取項(_M)" #. UStnu -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:333 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:317 msgctxt "scgeneralpage|legacy_cell_selection_cb" msgid "Position cell reference with selection" msgstr "以選取區域作儲存格參照定位" #. MJyaA -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:342 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:326 msgctxt "extended_tip|legacy_cell_selection_cb" msgid "With the option set, expanding a selection (with Ctrl + Shift + Down/Up) jumps to the end of the range in the column that was added as last to the initial selection. When the option is not set, expanding a selection (with Ctrl + Shift + Down/Up) jumps to the end of the range in the column where selecting the cell range was started. The same of course applies when extending a selection on rows, with Ctrl + Shift + Left/Right." msgstr "" #. S2fGF -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:354 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:338 msgctxt "scgeneralpage|replwarncb" msgid "Show overwrite _warning when pasting data" msgstr "貼上資料時顯示覆寫警告(_W)" #. yDGPC -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:363 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:347 msgctxt "extended_tip|replwarncb" msgid "Specifies that, when you paste cells from the clipboard to a cell range that is not empty, a warning appears." msgstr "" #. H477x -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:375 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:359 msgctxt "scgeneralpage|enter_paste_mode_cb" msgid "Press Enter to paste and clear clipboard" msgstr "" #. LFenu -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:391 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:375 msgctxt "scgeneralpage|textfmtcb" msgid "Use printer metrics for text formatting" msgstr "文字格式設定使用印表機字型尺度" #. ECUd7 -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:399 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:383 msgctxt "extended_tip|textfmtcb" msgid "Specifies that printer metrics are applied for printing and also for formatting the display on the screen." msgstr "指定列印以及格式化螢幕上的顯示所套用的印表機字型尺度。" #. zW9SZ -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:411 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:395 msgctxt "scgeneralpage|markhdrcb" msgid "Highlight sele_ction in column/row headers" msgstr "色彩標明欄標列號中的選取項(_C)" #. payBv -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:420 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:404 msgctxt "extended_tip|markhdrcb" msgid "Specifies whether to highlight column and row headers in the selected columns or rows." msgstr "" #. KGWyE -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:432 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:416 msgctxt "scgeneralpage|sortrefupdatecb" msgid "Update references when sorting range of cells" msgstr "排序儲存格的範圍時更新參照" #. M9G8o -#: sc/uiconfig/scalc/ui/scgeneralpage.ui:453 +#: sc/uiconfig/scalc/ui/scgeneralpage.ui:435 msgctxt "scgeneralpage|label3" msgid "Input Settings" msgstr "輸入設定" @@ -28683,19 +28814,19 @@ msgid "Enable the dialog again at Tools > Options > Calc > View" msgstr "請前往「工具 > 選項 > Calc > 檢視」以再次啟用這個對話方塊" #. sekAN -#: sc/uiconfig/scalc/ui/searchresults.ui:102 +#: sc/uiconfig/scalc/ui/searchresults.ui:101 msgctxt "searchresults|sheet" msgid "Sheet" msgstr "工作表" #. BFKKA -#: sc/uiconfig/scalc/ui/searchresults.ui:116 +#: sc/uiconfig/scalc/ui/searchresults.ui:115 msgctxt "searchresults|cell" msgid "Cell" msgstr "儲存格" #. Knp9A -#: sc/uiconfig/scalc/ui/searchresults.ui:130 +#: sc/uiconfig/scalc/ui/searchresults.ui:129 msgctxt "searchresults|content" msgid "Content" msgstr "內容" @@ -28707,67 +28838,67 @@ msgid "Select Data Source" msgstr "選取資料來源" #. Apf6s -#: sc/uiconfig/scalc/ui/selectdatasource.ui:101 +#: sc/uiconfig/scalc/ui/selectdatasource.ui:96 msgctxt "selectdatasource|label2" msgid "_Database:" msgstr "資料庫(_D)：" #. FUXnG -#: sc/uiconfig/scalc/ui/selectdatasource.ui:115 +#: sc/uiconfig/scalc/ui/selectdatasource.ui:110 msgctxt "selectdatasource|label4" msgid "_Type:" msgstr "類型(_T)：" #. C2J5p -#: sc/uiconfig/scalc/ui/selectdatasource.ui:132 +#: sc/uiconfig/scalc/ui/selectdatasource.ui:127 msgctxt "selectdatasource|extended_tip|database" msgid "Select the database that contains the data source that you want to use." msgstr "選取包含您要使用資料來源的資料庫。" #. BYmD6 -#: sc/uiconfig/scalc/ui/selectdatasource.ui:147 +#: sc/uiconfig/scalc/ui/selectdatasource.ui:142 msgctxt "selectdatasource|type" msgid "Table" msgstr "表格" #. vDibq -#: sc/uiconfig/scalc/ui/selectdatasource.ui:148 +#: sc/uiconfig/scalc/ui/selectdatasource.ui:143 msgctxt "selectdatasource|type" msgid "Query" msgstr "查詢" #. LRSFg -#: sc/uiconfig/scalc/ui/selectdatasource.ui:149 +#: sc/uiconfig/scalc/ui/selectdatasource.ui:144 msgctxt "selectdatasource|type" msgid "Sql" msgstr "Sql" #. 2vGhJ -#: sc/uiconfig/scalc/ui/selectdatasource.ui:150 +#: sc/uiconfig/scalc/ui/selectdatasource.ui:145 msgctxt "selectdatasource|type" msgid "Sql [Native]" msgstr "Sql [Native]" #. jZRBA -#: sc/uiconfig/scalc/ui/selectdatasource.ui:154 +#: sc/uiconfig/scalc/ui/selectdatasource.ui:149 msgctxt "selectdatasource|extended_tip|type" msgid "Click the source type of for the selected data source." msgstr "按一下選取資料來源的來源類型。" #. 3tKUG -#: sc/uiconfig/scalc/ui/selectdatasource.ui:167 +#: sc/uiconfig/scalc/ui/selectdatasource.ui:162 msgctxt "selectdatasource|label3" msgid "Data so_urce:" msgstr "資料來源(_U)：" #. 7hEo7 -#: sc/uiconfig/scalc/ui/selectdatasource.ui:191 +#: sc/uiconfig/scalc/ui/selectdatasource.ui:186 msgctxt "selectdatasource|extended_tip|datasource" msgid "Select the data source that you want to use." msgstr "選取要使用的資料來源。" #. 82STt -#: sc/uiconfig/scalc/ui/selectdatasource.ui:208 +#: sc/uiconfig/scalc/ui/selectdatasource.ui:201 msgctxt "selectdatasource|label1" msgid "Selection" msgstr "選取內容" @@ -28779,19 +28910,19 @@ msgid "Select Database Range" msgstr "選取資料庫範圍" #. LTKjo -#: sc/uiconfig/scalc/ui/selectrange.ui:132 +#: sc/uiconfig/scalc/ui/selectrange.ui:126 msgctxt "selectrange|extended_tip|treeview" msgid "Lists the available database ranges. To select a database range, click its name, and then click OK." msgstr "列出可用的資料庫區域。若要選擇資料庫區域，請按一下資料庫名稱，然後按一下 [確定]。" #. EpBCK -#: sc/uiconfig/scalc/ui/selectrange.ui:145 +#: sc/uiconfig/scalc/ui/selectrange.ui:137 msgctxt "selectrange|label1" msgid "Ranges" msgstr "範圍" #. DnqZ2 -#: sc/uiconfig/scalc/ui/selectrange.ui:170 +#: sc/uiconfig/scalc/ui/selectrange.ui:162 msgctxt "selectrange|extended_tip|SelectRangeDialog" msgid "Selects a database range that you defined under Data - Define Range." msgstr "選取您在 [資料] - [定義區域] 之下所定義的資料庫區域。" @@ -28803,55 +28934,55 @@ msgid "Select Source" msgstr "選取來源" #. jiPGh -#: sc/uiconfig/scalc/ui/selectsource.ui:104 +#: sc/uiconfig/scalc/ui/selectsource.ui:100 msgctxt "selectsource|namedrange" msgid "_Named range:" msgstr "命名的範圍(_N)：" #. ECBru -#: sc/uiconfig/scalc/ui/selectsource.ui:146 +#: sc/uiconfig/scalc/ui/selectsource.ui:142 msgctxt "selectsource|selection" msgid "_Current selection" msgstr "目前的選取(_C)" #. gBdW4 -#: sc/uiconfig/scalc/ui/selectsource.ui:156 +#: sc/uiconfig/scalc/ui/selectsource.ui:152 msgctxt "selectsource|extended_tip|selection" msgid "Uses the selected cells as the data source for the pivot table." msgstr "使用選取的儲存格作為樞紐分析表的資料來源。" #. gsMej -#: sc/uiconfig/scalc/ui/selectsource.ui:168 +#: sc/uiconfig/scalc/ui/selectsource.ui:164 msgctxt "selectsource|database" msgid "_Data source registered in %PRODUCTNAME" msgstr "%PRODUCTNAME 中已註冊的資料來源(_D)" #. whAZ5 -#: sc/uiconfig/scalc/ui/selectsource.ui:178 +#: sc/uiconfig/scalc/ui/selectsource.ui:174 msgctxt "selectsource|extended_tip|database" msgid "Uses a table or query in a database that is registered in %PRODUCTNAME as the data source for the pivot table." msgstr "使用表格或把 %PRODUCTNAME 中的註冊資料庫的查詢作為樞紐分析表的資料來源。" #. ZDghg -#: sc/uiconfig/scalc/ui/selectsource.ui:190 +#: sc/uiconfig/scalc/ui/selectsource.ui:186 msgctxt "selectsource|external" msgid "_External source/interface" msgstr "外部來源/介面(_E)" #. S9LNt -#: sc/uiconfig/scalc/ui/selectsource.ui:200 +#: sc/uiconfig/scalc/ui/selectsource.ui:196 msgctxt "selectsource|extended_tip|external" msgid "Opens the External Source dialog where you can select the OLAP data source for the pivot table." msgstr "開啟 [外部來源] 對話方塊，您可以用它來為樞紐分析表選取 OLAP 資料來源。" #. 8ZtBt -#: sc/uiconfig/scalc/ui/selectsource.ui:218 +#: sc/uiconfig/scalc/ui/selectsource.ui:212 msgctxt "selectsource|label1" msgid "Selection" msgstr "選取" #. JV3gr -#: sc/uiconfig/scalc/ui/selectsource.ui:240 +#: sc/uiconfig/scalc/ui/selectsource.ui:234 msgctxt "selectsource|extended_tip|SelectSourceDialog" msgid "Opens a dialog where you can select the source for your pivot table, and then create your table." msgstr "開啟一個可以為您的樞紐分析表選取來源，以及建立表格的對話方塊。" @@ -28917,25 +29048,25 @@ msgid "_Share this spreadsheet with other users" msgstr "與其他使用者共用此試算表(_S)" #. xpXCL -#: sc/uiconfig/scalc/ui/sharedocumentdlg.ui:130 +#: sc/uiconfig/scalc/ui/sharedocumentdlg.ui:124 msgctxt "sharedocumentdlg|warning" msgid "Note: Changes to formatting attributes like fonts, colors, and number formats will not be saved and some functionalities like editing charts and drawing objects are not available in shared mode. Turn off shared mode to get exclusive access needed for those changes and functionalities." msgstr "注意：在共用模式中，您無法儲存字型、色彩、數字格式等格式設定特性，也無法使用編輯圖表、繪製物件等部分功能。若您需要做出這類變更，或是需要使用這類功能，請關閉共用模式以取得獨占性存取權。" #. dQz77 -#: sc/uiconfig/scalc/ui/sharedocumentdlg.ui:201 +#: sc/uiconfig/scalc/ui/sharedocumentdlg.ui:188 msgctxt "sharedocumentdlg|name" msgid "Name" msgstr "名稱" #. EC8AA -#: sc/uiconfig/scalc/ui/sharedocumentdlg.ui:214 +#: sc/uiconfig/scalc/ui/sharedocumentdlg.ui:201 msgctxt "sharedocumentdlg|accessed" msgid "Accessed" msgstr "已存取" #. hHHJG -#: sc/uiconfig/scalc/ui/sharedocumentdlg.ui:240 +#: sc/uiconfig/scalc/ui/sharedocumentdlg.ui:225 msgctxt "sharedocumentdlg|label1" msgid "Users Currently Accessing This Spreadsheet" msgstr "使用者目前正在存取此試算表" @@ -28959,241 +29090,241 @@ msgid "Do not show warning again." msgstr "不要再給我這個警告。" #. cPFdV -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:77 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:73 msgctxt "sheetprintpage|radioBTN_TOPDOWN" msgid "_Top to bottom, then right" msgstr "由上至下，再向右(_T)" #. Fjdpq -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:88 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:84 msgctxt "sheetprintpage|extended_tip|radioBTN_TOPDOWN" msgid "Prints vertically from the left column to the bottom of the sheet." msgstr "依從左至右 (欄)，自上至下 (列) 的順序垂直列印試算表。" #. a2f9m -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:99 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:95 msgctxt "sheetprintpage|radioBTN_LEFTRIGHT" msgid "_Left to right, then down" msgstr "由左至右，再向下(_L)" #. 9Koax -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:112 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:108 msgctxt "sheetprintpage|extended_tip|radioBTN_LEFTRIGHT" msgid "Prints horizontally from the top row of the sheet to the right column." msgstr "依自上至下 (列)，從左至右 (欄) 的順序水平列印試算表。" #. Zmz6D -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:123 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:119 msgctxt "sheetprintpage|checkBTN_PAGENO" msgid "First _page number:" msgstr "第一頁頁碼(_P)：" #. SDefG -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:135 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:131 msgctxt "sheetprintpage|extended_tip|checkBTN_PAGENO" msgid "Select this option if you want the first page to start with a number other than 1." msgstr "如果您想要列印的起始頁面不是第 1 頁則選取此選項。" #. mEyFM -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:156 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:152 msgctxt "sheetprintpage|extended_tip|spinED_PAGENO" msgid "Enter the number of the first page." msgstr "輸入第一頁的頁碼。" #. ejXus -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:202 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:198 msgctxt "sheetprintpage|labelPageOrder" msgid "Page Order" msgstr "頁序" #. 6acF6 -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:237 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:229 msgctxt "sheetprintpage|checkBTN_HEADER" msgid "_Column and row headers" msgstr "欄標列號(_C)" #. tB2MC -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:246 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:238 msgctxt "sheetprintpage|extended_tip|checkBTN_HEADER" msgid "Specifies whether you want the column and row headers to be printed." msgstr "指定是否要列印欄標題和列標題。" #. A6vme -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:257 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:249 msgctxt "sheetprintpage|checkBTN_GRID" msgid "_Grid" msgstr "網格(_G)" #. V7t5z -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:267 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:259 msgctxt "sheetprintpage|extended_tip|checkBTN_GRID" msgid "Prints out the borders of the individual cells as a grid." msgstr "將個別儲存格的邊界以格線印出。" #. gwu4K -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:278 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:270 msgctxt "sheetprintpage|checkBTN_NOTES" msgid "_Comments" msgstr "評註(_C)" #. UJ7Js -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:287 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:279 msgctxt "sheetprintpage|extended_tip|checkBTN_NOTES" msgid "Prints the comments defined in your spreadsheet." msgstr "列印在試算表中定義的評註。" #. JDNDB -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:298 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:290 msgctxt "sheetprintpage|checkBTN_OBJECTS" msgid "_Objects/Images" msgstr "物件/影像(_O)" #. PVDXS -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:307 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:299 msgctxt "sheetprintpage|extended_tip|checkBTN_OBJECTS" msgid "Includes all inserted objects (if printable) and graphics with the printed document." msgstr "使列印的文件中包括所有插入的物件 (如果可列印) 和圖形。" #. JvBi3 -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:318 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:310 msgctxt "sheetprintpage|checkBTN_CHARTS" msgid "Charts" msgstr "圖表" #. tXEiG -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:327 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:319 msgctxt "sheetprintpage|extended_tip|checkBTN_CHARTS" msgid "Prints the charts that have been inserted into your spreadsheet." msgstr "列印已插入到試算表中的圖表。" #. zUYVr -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:338 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:330 msgctxt "sheetprintpage|checkBTN_DRAWINGS" msgid "_Drawing objects" msgstr "繪圖物件(_D)" #. iqL8r -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:347 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:339 msgctxt "sheetprintpage|extended_tip|checkBTN_DRAWINGS" msgid "Includes all drawing objects in the printed document." msgstr "使列印的文件中含括所有繪圖物件。" #. ideQb -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:358 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:350 msgctxt "sheetprintpage|checkBTN_FORMULAS" msgid "_Formulas" msgstr "公式(_F)" #. 9PVBj -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:367 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:359 msgctxt "sheetprintpage|extended_tip|checkBTN_FORMULAS" msgid "Prints the formulas contained in the cells, instead of the results." msgstr "列印儲存格中的公式而不是結果。" #. seZGj -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:378 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:370 msgctxt "sheetprintpage|checkBTN_NULLVALS" msgid "_Zero values" msgstr "零值(_Z)" #. gNEsv -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:387 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:379 msgctxt "sheetprintpage|extended_tip|checkBTN_NULLVALS" msgid "Specifies that cells with a zero value are printed." msgstr "指定列印含有零值的儲存格。" #. cAo6Q -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:416 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:406 msgctxt "sheetprintpage|labelPrint" msgid "Print" msgstr "列印" #. 5KGnx -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:450 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:436 msgctxt "sheetprintpage|labelScalingMode" msgid "Scaling _mode:" msgstr "縮放模式(_M)：" #. 4B48Q -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:475 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:461 msgctxt "sheetprintpage|labelSF" msgid "_Scaling factor:" msgstr "縮放係數(_S)：" #. LDbqC -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:494 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:480 msgctxt "sheetprintpage|extended_tip|spinED_SCALEALL" msgid "Enter a scaling factor. Factors less than 100 reduce the pages, higher factors enlarge the pages." msgstr "" #. AgUiF -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:521 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:507 msgctxt "sheetprintpage|labelWP" msgid "_Width in pages:" msgstr "寬度頁數(_W)：" #. FVuA4 -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:539 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:525 msgctxt "sheetprintpage|labelHP" msgid "_Height in pages:" msgstr "高度頁數(_H)：" #. AqCkB -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:567 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:552 msgctxt "sheetprintpage|extended_tip|spinED_SCALEPAGEWIDTH" msgid "Enter the maximum number of pages to be printed horizontally across." msgstr "輸入要水平橫跨列印的最大頁數。" #. Tpcb3 -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:588 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:572 msgctxt "sheetprintpage|extended_tip|spinED_SCALEPAGEHEIGHT" msgid "Enter the maximum number of pages to be printed vertically stacked." msgstr "輸入要垂直堆疊列印的最大頁數。" #. SeMBt -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:613 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:597 msgctxt "sheetprintpage|labelNP" msgid "N_umber of pages:" msgstr "頁數(_U)：" #. KeXD7 -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:632 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:616 msgctxt "sheetprintpage|extended_tip|spinED_SCALEPAGENUM" msgid "Enter the maximum number of pages to be printed." msgstr "請輸入要列印的最大頁數。" #. CvyP8 -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:660 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:644 msgctxt "sheetprintpage|comboLB_SCALEMODE" msgid "Reduce/enlarge printout" msgstr "減小/擴大列印輸出" #. GxZyi -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:661 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:645 msgctxt "sheetprintpage|comboLB_SCALEMODE" msgid "Fit print range(s) to width/height" msgstr "使列印範圍符合寬度/高度" #. Y2GhT -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:662 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:646 msgctxt "sheetprintpage|comboLB_SCALEMODE" msgid "Fit print range(s) on number of pages" msgstr "使列印範圍符合多頁" #. AzkrF -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:666 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:650 msgctxt "sheetprintpage|extended_tip|comboLB_SCALEMODE" msgid "Select a scaling mode from the list box. Appropriate controls will be shown below the list box." msgstr "" #. zeMqg -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:686 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:668 msgctxt "sheetprintpage|labelScale" msgid "Scale" msgstr "顯示比例" #. g39or -#: sc/uiconfig/scalc/ui/sheetprintpage.ui:700 +#: sc/uiconfig/scalc/ui/sheetprintpage.ui:682 msgctxt "sheetprintpage|extended_tip|SheetPrintPage" msgid "Specifies the elements to be included in the printout of all sheets with the current Page Style. Additionally, you can set the print order, the first page number, and the page scale." msgstr "指定具有目前頁面樣式的所有試算表之列印輸出中要包含的元素。此外，您可以設定列印順序，起始頁碼與頁面比例。" @@ -29217,37 +29348,37 @@ msgid "Shows or hides recorded changes." msgstr "" #. au2jE -#: sc/uiconfig/scalc/ui/showchangesdialog.ui:127 +#: sc/uiconfig/scalc/ui/showchangesdialog.ui:123 msgctxt "showchangesdialog|showaccepted" msgid "Show _accepted changes" msgstr "顯示接受的變更(_A)" #. f7GQr -#: sc/uiconfig/scalc/ui/showchangesdialog.ui:136 +#: sc/uiconfig/scalc/ui/showchangesdialog.ui:132 msgctxt "showchangesdialog|extended_tip|showaccepted" msgid "Shows or hides the changes that were accepted." msgstr "" #. KBgdT -#: sc/uiconfig/scalc/ui/showchangesdialog.ui:147 +#: sc/uiconfig/scalc/ui/showchangesdialog.ui:143 msgctxt "showchangesdialog|showrejected" msgid "Show _rejected changes" msgstr "顯示拒絕的變更(_R)" #. vUrkK -#: sc/uiconfig/scalc/ui/showchangesdialog.ui:156 +#: sc/uiconfig/scalc/ui/showchangesdialog.ui:152 msgctxt "showchangesdialog|extended_tip|showrejected" msgid "Shows or hides the changes that were rejected." msgstr "" #. PHqfD -#: sc/uiconfig/scalc/ui/showchangesdialog.ui:187 +#: sc/uiconfig/scalc/ui/showchangesdialog.ui:181 msgctxt "showchangesdialog|label1" msgid "Filter Settings" msgstr "篩選設定" #. B3EDe -#: sc/uiconfig/scalc/ui/showchangesdialog.ui:261 +#: sc/uiconfig/scalc/ui/showchangesdialog.ui:255 msgctxt "showchangesdialog|extended_tip|ShowChangesDialog" msgid "Shows or hides recorded changes." msgstr "" @@ -29277,13 +29408,13 @@ msgid "Show Sheet" msgstr "顯示工作表" #. BC9wU -#: sc/uiconfig/scalc/ui/showsheetdialog.ui:140 +#: sc/uiconfig/scalc/ui/showsheetdialog.ui:132 msgctxt "showsheetdialog|label1" msgid "Hidden Sheets" msgstr "隱藏的工作表" #. 2NR97 -#: sc/uiconfig/scalc/ui/showsheetdialog.ui:165 +#: sc/uiconfig/scalc/ui/showsheetdialog.ui:157 msgctxt "showsheetdialog|extended_tip|ShowSheetDialog" msgid "Displays a list of all hidden sheets in your spreadsheet document." msgstr "" @@ -29721,247 +29852,247 @@ msgid "Enter the cell range that can be changed." msgstr "" #. UWsBu -#: sc/uiconfig/scalc/ui/solverdlg.ui:435 +#: sc/uiconfig/scalc/ui/solverdlg.ui:429 msgctxt "solverdlg|cellreflabel" msgid "_Cell reference" msgstr "儲存格參照(_C)" #. Fj7m7 -#: sc/uiconfig/scalc/ui/solverdlg.ui:449 +#: sc/uiconfig/scalc/ui/solverdlg.ui:443 msgctxt "solverdlg|oplabel" msgid "_Operator" msgstr "運算子(_O)" #. qsDhL -#: sc/uiconfig/scalc/ui/solverdlg.ui:463 +#: sc/uiconfig/scalc/ui/solverdlg.ui:457 msgctxt "solverdlg|constraintlabel" msgid "V_alue" msgstr "值(_A)" #. ergok -#: sc/uiconfig/scalc/ui/solverdlg.ui:482 +#: sc/uiconfig/scalc/ui/solverdlg.ui:476 msgctxt "solverdlg|ref1edit-atkobject" msgid "Cell reference" msgstr "儲存格參照" #. EDNPp -#: sc/uiconfig/scalc/ui/solverdlg.ui:500 +#: sc/uiconfig/scalc/ui/solverdlg.ui:494 msgctxt "solverdlg|ref2edit-atkobject" msgid "Cell reference" msgstr "儲存格參照" #. NzCXc -#: sc/uiconfig/scalc/ui/solverdlg.ui:518 +#: sc/uiconfig/scalc/ui/solverdlg.ui:512 msgctxt "solverdlg|ref3edit-atkobject" msgid "Cell reference" msgstr "儲存格參照" #. 5Wrfy -#: sc/uiconfig/scalc/ui/solverdlg.ui:536 +#: sc/uiconfig/scalc/ui/solverdlg.ui:530 msgctxt "solverdlg|ref4edit-atkobject" msgid "Cell reference" msgstr "儲存格參照" #. kugmw -#: sc/uiconfig/scalc/ui/solverdlg.ui:594 +#: sc/uiconfig/scalc/ui/solverdlg.ui:588 msgctxt "solverdlg|op1list" msgid "<=" msgstr "<=" #. PJJBP -#: sc/uiconfig/scalc/ui/solverdlg.ui:595 +#: sc/uiconfig/scalc/ui/solverdlg.ui:589 msgctxt "solverdlg|op1list" msgid "=" msgstr "=" #. br9qw -#: sc/uiconfig/scalc/ui/solverdlg.ui:596 +#: sc/uiconfig/scalc/ui/solverdlg.ui:590 msgctxt "solverdlg|op1list" msgid "=>" msgstr "=>" #. zEFNz -#: sc/uiconfig/scalc/ui/solverdlg.ui:597 +#: sc/uiconfig/scalc/ui/solverdlg.ui:591 msgctxt "solverdlg|op1list" msgid "Integer" msgstr "整數" #. u6rX4 -#: sc/uiconfig/scalc/ui/solverdlg.ui:598 +#: sc/uiconfig/scalc/ui/solverdlg.ui:592 msgctxt "solverdlg|op1list" msgid "Binary" msgstr "二進位" #. BBBzf -#: sc/uiconfig/scalc/ui/solverdlg.ui:602 +#: sc/uiconfig/scalc/ui/solverdlg.ui:596 msgctxt "solverdlg|op1list-atkobject" msgid "Operator" msgstr "運算子" #. B5xAm -#: sc/uiconfig/scalc/ui/solverdlg.ui:616 +#: sc/uiconfig/scalc/ui/solverdlg.ui:610 msgctxt "solverdlg|op2list" msgid "<=" msgstr "<=" #. SkKCD -#: sc/uiconfig/scalc/ui/solverdlg.ui:617 +#: sc/uiconfig/scalc/ui/solverdlg.ui:611 msgctxt "solverdlg|op2list" msgid "=" msgstr "=" #. B8JEm -#: sc/uiconfig/scalc/ui/solverdlg.ui:618 +#: sc/uiconfig/scalc/ui/solverdlg.ui:612 msgctxt "solverdlg|op2list" msgid "=>" msgstr "=>" #. F8mFP -#: sc/uiconfig/scalc/ui/solverdlg.ui:619 +#: sc/uiconfig/scalc/ui/solverdlg.ui:613 msgctxt "solverdlg|op2list" msgid "Integer" msgstr "整數" #. dFF3E -#: sc/uiconfig/scalc/ui/solverdlg.ui:620 +#: sc/uiconfig/scalc/ui/solverdlg.ui:614 msgctxt "solverdlg|op2list" msgid "Binary" msgstr "二進位" #. soS8F -#: sc/uiconfig/scalc/ui/solverdlg.ui:624 +#: sc/uiconfig/scalc/ui/solverdlg.ui:618 msgctxt "solverdlg|op2list-atkobject" msgid "Operator" msgstr "運算子" #. h7Qty -#: sc/uiconfig/scalc/ui/solverdlg.ui:638 +#: sc/uiconfig/scalc/ui/solverdlg.ui:632 msgctxt "solverdlg|op3list" msgid "<=" msgstr "<=" #. nNApc -#: sc/uiconfig/scalc/ui/solverdlg.ui:639 +#: sc/uiconfig/scalc/ui/solverdlg.ui:633 msgctxt "solverdlg|op3list" msgid "=" msgstr "=" #. n6rxy -#: sc/uiconfig/scalc/ui/solverdlg.ui:640 +#: sc/uiconfig/scalc/ui/solverdlg.ui:634 msgctxt "solverdlg|op3list" msgid "=>" msgstr "=>" #. CTQdS -#: sc/uiconfig/scalc/ui/solverdlg.ui:641 +#: sc/uiconfig/scalc/ui/solverdlg.ui:635 msgctxt "solverdlg|op3list" msgid "Integer" msgstr "整數" #. 5RTdh -#: sc/uiconfig/scalc/ui/solverdlg.ui:642 +#: sc/uiconfig/scalc/ui/solverdlg.ui:636 msgctxt "solverdlg|op3list" msgid "Binary" msgstr "二進位" #. Q2GFE -#: sc/uiconfig/scalc/ui/solverdlg.ui:646 +#: sc/uiconfig/scalc/ui/solverdlg.ui:640 msgctxt "solverdlg|op3list-atkobject" msgid "Operator" msgstr "運算子" #. GUgdo -#: sc/uiconfig/scalc/ui/solverdlg.ui:660 +#: sc/uiconfig/scalc/ui/solverdlg.ui:654 msgctxt "solverdlg|op4list" msgid "<=" msgstr "<=" #. t7LRh -#: sc/uiconfig/scalc/ui/solverdlg.ui:661 +#: sc/uiconfig/scalc/ui/solverdlg.ui:655 msgctxt "solverdlg|op4list" msgid "=" msgstr "=" #. ET9ho -#: sc/uiconfig/scalc/ui/solverdlg.ui:662 +#: sc/uiconfig/scalc/ui/solverdlg.ui:656 msgctxt "solverdlg|op4list" msgid "=>" msgstr "=>" #. mJFHw -#: sc/uiconfig/scalc/ui/solverdlg.ui:663 +#: sc/uiconfig/scalc/ui/solverdlg.ui:657 msgctxt "solverdlg|op4list" msgid "Integer" msgstr "整數" #. CshEu -#: sc/uiconfig/scalc/ui/solverdlg.ui:664 +#: sc/uiconfig/scalc/ui/solverdlg.ui:658 msgctxt "solverdlg|op4list" msgid "Binary" msgstr "二進位" #. AvF96 -#: sc/uiconfig/scalc/ui/solverdlg.ui:668 +#: sc/uiconfig/scalc/ui/solverdlg.ui:662 msgctxt "solverdlg|op4list-atkobject" msgid "Operator" msgstr "運算子" #. NGbaD -#: sc/uiconfig/scalc/ui/solverdlg.ui:687 +#: sc/uiconfig/scalc/ui/solverdlg.ui:681 msgctxt "solverdlg|val1edit-atkobject" msgid "Value" msgstr "數值" #. y52h9 -#: sc/uiconfig/scalc/ui/solverdlg.ui:706 +#: sc/uiconfig/scalc/ui/solverdlg.ui:700 msgctxt "solverdlg|val2edit-atkobject" msgid "Value" msgstr "數值" #. 2Bbsq -#: sc/uiconfig/scalc/ui/solverdlg.ui:725 +#: sc/uiconfig/scalc/ui/solverdlg.ui:719 msgctxt "solverdlg|val3edit-atkobject" msgid "Value" msgstr "數值" #. smjSQ -#: sc/uiconfig/scalc/ui/solverdlg.ui:744 +#: sc/uiconfig/scalc/ui/solverdlg.ui:738 msgctxt "solverdlg|val4edit-atkobject" msgid "Value" msgstr "數值" #. YSBhR -#: sc/uiconfig/scalc/ui/solverdlg.ui:802 +#: sc/uiconfig/scalc/ui/solverdlg.ui:796 msgctxt "solverdlg|del2|tooltip_text" msgid "Remove" msgstr "移除" #. 6dsa5 -#: sc/uiconfig/scalc/ui/solverdlg.ui:814 +#: sc/uiconfig/scalc/ui/solverdlg.ui:808 msgctxt "solverdlg|del1|tooltip_text" msgid "Remove" msgstr "移除" #. JgssS -#: sc/uiconfig/scalc/ui/solverdlg.ui:826 +#: sc/uiconfig/scalc/ui/solverdlg.ui:820 msgctxt "solverdlg|del3|tooltip_text" msgid "Remove" msgstr "移除" #. SHTSA -#: sc/uiconfig/scalc/ui/solverdlg.ui:838 +#: sc/uiconfig/scalc/ui/solverdlg.ui:832 msgctxt "solverdlg|del4|tooltip_text" msgid "Remove" msgstr "移除" #. 8uHoa -#: sc/uiconfig/scalc/ui/solverdlg.ui:863 +#: sc/uiconfig/scalc/ui/solverdlg.ui:855 msgctxt "solverdlg|label1" msgid "Limiting Conditions" msgstr "限制條件" #. bXYQB -#: sc/uiconfig/scalc/ui/solverdlg.ui:896 +#: sc/uiconfig/scalc/ui/solverdlg.ui:888 msgctxt "solverdlg|extended_tip|SolverDialog" msgid "Opens the Solver dialog. A solver allows you to solve mathematical problems with multiple unknown variables and a set of constraints on the variables by goal-seeking methods." msgstr "" @@ -30081,241 +30212,241 @@ msgid "Options" msgstr "選項" #. HCV8n -#: sc/uiconfig/scalc/ui/sortkey.ui:33 +#: sc/uiconfig/scalc/ui/sortkey.ui:29 msgctxt "sortkey|extended_tip|sortlb" msgid "Select the column that you want to use as the primary sort key." msgstr "" #. HSoQ2 -#: sc/uiconfig/scalc/ui/sortkey.ui:45 +#: sc/uiconfig/scalc/ui/sortkey.ui:41 msgctxt "sortkey|up" msgid "_Ascending" msgstr "升序(_A)" #. BUxPb -#: sc/uiconfig/scalc/ui/sortkey.ui:55 +#: sc/uiconfig/scalc/ui/sortkey.ui:51 msgctxt "sortkey|extended_tip|up" msgid "Sorts the selection from the lowest value to the highest value. The sorting rules are given by the locale. You can define the sort rules on Data - Sort - Options." msgstr "" #. TfqAv -#: sc/uiconfig/scalc/ui/sortkey.ui:66 +#: sc/uiconfig/scalc/ui/sortkey.ui:62 msgctxt "sortkey|down" msgid "_Descending" msgstr "降序(_D)" #. gqJji -#: sc/uiconfig/scalc/ui/sortkey.ui:76 +#: sc/uiconfig/scalc/ui/sortkey.ui:72 msgctxt "sortkey|extended_tip|down" msgid "Sorts the selection from the highest value to the lowest value. You can define the sort rules on Data - Sort - Options." msgstr "" #. Svy7B -#: sc/uiconfig/scalc/ui/sortkey.ui:93 +#: sc/uiconfig/scalc/ui/sortkey.ui:87 msgctxt "sortkey|sortft" msgid "Sort Key " msgstr "排序鍵 " #. AEDau -#: sc/uiconfig/scalc/ui/sortkey.ui:101 +#: sc/uiconfig/scalc/ui/sortkey.ui:95 msgctxt "sortkey|extended_tip|SortKeyFrame" msgid "Select the column that you want to use as the primary sort key." msgstr "" #. 9FBK2 -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:32 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:28 msgctxt "sortoptionspage|case" msgid "Case _sensitive" msgstr "區分字母大小寫(_S)" #. F9BE3 -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:41 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:37 #, fuzzy msgctxt "sortoptionspage|extended_tip|case" msgid "Sorts first by uppercase letters and then by lowercase letters. For Asian languages, special handling applies." msgstr " 先依大寫字母排序，再依小寫字母排序。對於亞洲語言而言，需要套用特殊的處理規則。" #. fTCGJ -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:52 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:48 msgctxt "sortoptionspage|header" msgid "Range contains..." msgstr "範圍包含..." #. nNTEu -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:61 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:57 #, fuzzy msgctxt "sortoptionspage|extended_tip|header" msgid "Omits the first row or the first column in the selection from the sort." msgstr " 排序時忽略選取區域中的第一列或第一欄。" #. RM629 -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:72 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:68 msgctxt "sortoptionspage|formats" msgid "Include formats" msgstr "包含格式" #. KbJnq -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:81 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:77 #, fuzzy msgctxt "sortoptionspage|extended_tip|formats" msgid "Preserves the current cell formatting." msgstr " 保留目前的儲存格格式。" #. Gtck5 -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:92 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:88 msgctxt "sortoptionspage|naturalsort" msgid "Enable natural sort" msgstr "啟用自然排序" #. VH4tV -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:101 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:97 msgctxt "sortoptionspage|extended_tip|naturalsort" msgid "Natural sort is a sort algorithm that sorts string-prefixed numbers based on the value of the numerical element in each sorted number, instead of the traditional way of sorting them as ordinary strings." msgstr "" #. yev2y -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:112 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:108 msgctxt "sortoptionspage|includenotes" msgid "Include boundary column(s) containing only comments" msgstr "包含評註獨有邊界欄" #. NJ69D -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:127 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:123 msgctxt "sortoptionspage|includeimages" msgid "Include boundary column(s) containing only images" msgstr "包含影像獨有邊界欄" #. eZ8XM -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:142 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:138 msgctxt "sortoptionspage|copyresult" msgid "Copy sort results to:" msgstr "複製排序結果至：" #. gis9V -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:154 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:150 #, fuzzy msgctxt "sortoptionspage|extended_tip|copyresult" msgid "Copies the sorted list to the cell range that you specify." msgstr " 將已排序的清單複製到指定的儲存格範圍中。" #. WKWmE -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:174 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:170 msgctxt "sortoptionspage|outarealb-atkobject" msgid "Copy sort results to:" msgstr "複製排序結果至：" #. ABAdF -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:175 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:171 #, fuzzy msgctxt "sortoptionspage|extended_tip|outarealb" msgid "Select a named cell range where you want to display the sorted list, or enter a cell range in the input box." msgstr " 選取已命名的 [儲存格範圍]，在此處您可顯示排序的清單，或在輸入方塊中輸入儲存格範圍。" #. ABGSS -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:195 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:191 msgctxt "sortoptionspage|outareaed-atkobject" msgid "Copy sort results to:" msgstr "複製排序結果至：" #. kpVh9 -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:196 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:192 #, fuzzy msgctxt "sortoptionspage|extended_tip|outareaed" msgid "Enter the cell range where you want to display the sorted list, or select a named range from the list." msgstr " 輸入您要用於顯示已排序清單的儲存格範圍，或從清單中選取一個已命名範圍。" #. GwzEB -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:207 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:203 msgctxt "sortoptionspage|sortuser" msgid "Custom sort order" msgstr "自訂排序方式" #. aDYdR -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:219 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:215 #, fuzzy msgctxt "sortoptionspage|extended_tip|sortuser" msgid "Click here and then select the custom sort order that you want." msgstr " 按一下此處，然後選取需要的自訂排序順序。" #. iWcGs -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:238 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:234 msgctxt "sortoptionspage|sortuserlb-atkobject" msgid "Custom sort order" msgstr "自訂排序方式" #. QagY7 -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:239 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:235 #, fuzzy msgctxt "sortoptionspage|extended_tip|sortuserlb" msgid "Select the custom sort order that you want to apply. To define a custom sort order, choose Tools - Options - %PRODUCTNAME Calc - Sort Lists ." msgstr "選取您想要套用的自訂排序順序。若要定義自訂排序順序，請選擇 [工具] - [選項] - [%PRODUCTNAME Calc] - [排序清單]。" #. KJrPL -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:254 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:250 msgctxt "sortoptionspage|label6" msgid "Language" msgstr "語言" #. dBv73 -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:268 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:264 msgctxt "sortoptionspage|algorithmft" msgid "Options" msgstr "選項" #. ArfWB -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:283 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:279 #, fuzzy msgctxt "sortoptionspage|extended_tip|algorithmlb" msgid "Select a sorting option for the language." msgstr " 選取語言的排序選項。" #. u52Ei -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:304 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:300 #, fuzzy msgctxt "sortoptionspage|extended_tip|language" msgid "Select the language for the sorting rules." msgstr " 選取用於排序規則的語言。" #. aDahD -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:345 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:339 msgctxt "sortoptionspage|label2" msgid "Sort Options" msgstr "排序選項" #. TkBw5 -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:377 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:367 msgctxt "sortoptionspage|topdown" msgid "_Top to bottom (sort rows)" msgstr "從頂至底 (排序列)(_T)" #. bSvKu -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:387 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:377 #, fuzzy msgctxt "sortoptionspage|extended_tip|topdown" msgid "Sorts rows by the values in the active columns of the selected range." msgstr " 依照所選範圍內使用中欄的數值排序列。" #. aU8Mg -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:398 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:388 msgctxt "sortoptionspage|leftright" msgid "L_eft to right (sort columns)" msgstr "從左至右 (排序欄)(_E)" #. APEaE -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:408 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:398 #, fuzzy msgctxt "sortoptionspage|extended_tip|leftright" msgid "Sorts columns by the values in the active rows of the selected range." msgstr " 依照所選範圍內使用中列的數值排序欄。" #. nbPgX -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:425 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:413 msgctxt "sortoptionspage|label1" msgid "Direction" msgstr "方向" #. 7AH6P -#: sc/uiconfig/scalc/ui/sortoptionspage.ui:440 +#: sc/uiconfig/scalc/ui/sortoptionspage.ui:428 #, fuzzy msgctxt "sortoptionspage|extended_tip|SortOptionsPage" msgid "Sets additional sorting options." @@ -30405,6 +30536,12 @@ msgctxt "standardfilterdialog|StandardFilterDialog" msgid "Standard Filter" msgstr "標準篩選" +#. PLynG +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:46 +msgctxt "standardfilterdialog|clear" +msgid "_Clear" +msgstr "" + #. kFyDu #: sc/uiconfig/scalc/ui/standardfilterdialog.ui:70 msgctxt "standardfilterdialog|extended_tip|ok" @@ -30418,667 +30555,667 @@ msgid "Closes dialog and discards all changes." msgstr "" #. 3c3SD -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:175 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:169 msgctxt "standardfilterdialog|connect1" msgid "AND" msgstr "和" #. MqEKy -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:176 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:170 msgctxt "standardfilterdialog|connect1" msgid "OR" msgstr "或" #. htwdi -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:183 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:177 msgctxt "standardfilterdialog|connect1-atkobject" msgid "Operator 1" msgstr "運算子 1" #. oZfag -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:184 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:178 msgctxt "standardfilterdialog|extended_tip|connect1" msgid "For the following arguments, you can choose between the logical operators AND / OR." msgstr "" #. k269E -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:198 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:192 msgctxt "standardfilterdialog|connect2" msgid "AND" msgstr "和" #. oaqnE -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:199 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:193 msgctxt "standardfilterdialog|connect2" msgid "OR" msgstr "或" #. ob3HA -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:206 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:200 msgctxt "standardfilterdialog|connect2-atkobject" msgid "Operator 2" msgstr "運算子 2" #. pBC9C -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:207 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:201 msgctxt "standardfilterdialog|extended_tip|connect2" msgid "For the following arguments, you can choose between the logical operators AND / OR." msgstr "" #. UZ8iA -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:221 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:215 msgctxt "standardfilterdialog|connect3" msgid "AND" msgstr "和" #. AFjMF -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:222 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:216 msgctxt "standardfilterdialog|connect3" msgid "OR" msgstr "或" #. 4JHNi -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:226 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:220 msgctxt "standardfilterdialog|connect3-atkobject" msgid "Operator 3" msgstr "運算子 3" #. CqBrM -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:240 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:234 msgctxt "standardfilterdialog|connect4" msgid "AND" msgstr "和" #. AqUFa -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:241 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:235 msgctxt "standardfilterdialog|connect4" msgid "OR" msgstr "或" #. Sqfmd -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:245 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:239 msgctxt "standardfilterdialog|connect4-atkobject" msgid "Operator 4" msgstr "運算子 4" #. upKBs -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:258 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:252 msgctxt "standardfilterdialog|label2" msgid "Operator" msgstr "運算子" #. vRvzD -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:269 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:263 msgctxt "standardfilterdialog|label3" msgid "Field name" msgstr "欄位名稱" #. rqkAQ -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:280 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:274 msgctxt "standardfilterdialog|label4" msgid "Condition" msgstr "條件" #. ZgtGB -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:291 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:285 msgctxt "standardfilterdialog|label5" msgid "Value" msgstr "值" #. jHRCJ -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:307 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:301 msgctxt "standardfilterdialog|field1-atkobject" msgid "Field Name 1" msgstr "欄位名稱 1" #. e9keG -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:308 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:302 msgctxt "standardfilterdialog|extended_tip|field1" msgid "Specifies the field names from the current table to set them in the argument." msgstr "" #. 4ozHK -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:326 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:320 msgctxt "standardfilterdialog|field2-atkobject" msgid "Field Name 2" msgstr "欄位名稱 2" #. yhdgc -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:327 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:321 msgctxt "standardfilterdialog|extended_tip|field2" msgid "Specifies the field names from the current table to set them in the argument." msgstr "" #. C4XRG -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:345 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:339 msgctxt "standardfilterdialog|field3-atkobject" msgid "Field Name 3" msgstr "欄位名稱 3" #. FCNiT -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:346 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:340 msgctxt "standardfilterdialog|extended_tip|field3" msgid "Specifies the field names from the current table to set them in the argument." msgstr "" #. Y9hSS -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:361 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:355 msgctxt "standardfilterdialog|field4-atkobject" msgid "Field Name 4" msgstr "欄位名稱 4" #. x2eP5 -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:381 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:375 msgctxt "standardfilterdialog|cond1" msgid "Largest" msgstr "最大" #. m63HX -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:382 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:376 msgctxt "standardfilterdialog|cond1" msgid "Smallest" msgstr "最小" #. fBTE7 -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:383 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:377 msgctxt "standardfilterdialog|cond1" msgid "Largest %" msgstr "最大 %" #. WNjXW -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:384 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:378 msgctxt "standardfilterdialog|cond1" msgid "Smallest %" msgstr "最小 %" #. 2ydjF -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:385 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:379 msgctxt "standardfilterdialog|cond1" msgid "Contains" msgstr "包含" #. FXxAD -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:386 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:380 msgctxt "standardfilterdialog|cond1" msgid "Does not contain" msgstr "不包含" #. akbmG -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:387 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:381 msgctxt "standardfilterdialog|cond1" msgid "Begins with" msgstr "開頭是" #. oBQhx -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:388 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:382 msgctxt "standardfilterdialog|cond1" msgid "Does not begin with" msgstr "開頭不是" #. marCC -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:389 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:383 msgctxt "standardfilterdialog|cond1" msgid "Ends with" msgstr "結尾是" #. Gdi7y -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:390 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:384 msgctxt "standardfilterdialog|cond1" msgid "Does not end with" msgstr "結尾不是" #. rmPTC -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:397 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:391 msgctxt "standardfilterdialog|cond1-atkobject" msgid "Condition 1" msgstr "條件 1" #. D79PB -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:398 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:392 msgctxt "standardfilterdialog|extended_tip|cond1" msgid "Specifies the comparative operators through which the entries in the Field name and Value fields can be linked." msgstr "" #. uCRxP -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:418 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:412 msgctxt "standardfilterdialog|cond2" msgid "Largest" msgstr "最大" #. ibKLF -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:419 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:413 msgctxt "standardfilterdialog|cond2" msgid "Smallest" msgstr "最小" #. ek8Fy -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:420 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:414 msgctxt "standardfilterdialog|cond2" msgid "Largest %" msgstr "最大 %" #. nHN3m -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:421 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:415 msgctxt "standardfilterdialog|cond2" msgid "Smallest %" msgstr "最小 %" #. 3Divx -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:422 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:416 msgctxt "standardfilterdialog|cond2" msgid "Contains" msgstr "包含" #. eiDas -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:423 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:417 msgctxt "standardfilterdialog|cond2" msgid "Does not contain" msgstr "不包含" #. YTGTC -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:424 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:418 msgctxt "standardfilterdialog|cond2" msgid "Begins with" msgstr "開頭是" #. G2paX -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:425 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:419 msgctxt "standardfilterdialog|cond2" msgid "Does not begin with" msgstr "開頭不是" #. kAQBd -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:426 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:420 msgctxt "standardfilterdialog|cond2" msgid "Ends with" msgstr "結尾是" #. YBJmN -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:427 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:421 msgctxt "standardfilterdialog|cond2" msgid "Does not end with" msgstr "結尾不是" #. yBMtw -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:434 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:428 msgctxt "standardfilterdialog|cond2-atkobject" msgid "Condition 2" msgstr "條件 2" #. XVyyC -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:435 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:429 msgctxt "standardfilterdialog|extended_tip|cond2" msgid "Specifies the comparative operators through which the entries in the Field name and Value fields can be linked." msgstr "" #. rVFzc -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:455 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:449 msgctxt "standardfilterdialog|cond3" msgid "Largest" msgstr "最大" #. g6yBT -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:456 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:450 msgctxt "standardfilterdialog|cond3" msgid "Smallest" msgstr "最小" #. efcpx -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:457 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:451 msgctxt "standardfilterdialog|cond3" msgid "Largest %" msgstr "最大 %" #. M7ad9 -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:458 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:452 msgctxt "standardfilterdialog|cond3" msgid "Smallest %" msgstr "最小 %" #. NyGeB -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:459 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:453 msgctxt "standardfilterdialog|cond3" msgid "Contains" msgstr "包含" #. ECrNG -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:460 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:454 msgctxt "standardfilterdialog|cond3" msgid "Does not contain" msgstr "不包含" #. V8U5h -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:461 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:455 msgctxt "standardfilterdialog|cond3" msgid "Begins with" msgstr "開頭是" #. aGQxL -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:462 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:456 msgctxt "standardfilterdialog|cond3" msgid "Does not begin with" msgstr "開頭不是" #. kGmbc -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:463 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:457 msgctxt "standardfilterdialog|cond3" msgid "Ends with" msgstr "結尾是" #. QAidd -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:464 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:458 msgctxt "standardfilterdialog|cond3" msgid "Does not end with" msgstr "結尾不是" #. wrG8B -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:471 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:465 msgctxt "standardfilterdialog|cond3-atkobject" msgid "Condition 3" msgstr "條件 3" #. aHUBP -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:472 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:466 msgctxt "standardfilterdialog|extended_tip|cond3" msgid "Specifies the comparative operators through which the entries in the Field name and Value fields can be linked." msgstr "" #. jnrrF -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:492 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:486 msgctxt "standardfilterdialog|cond4" msgid "Largest" msgstr "最大" #. qaxP4 -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:493 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:487 msgctxt "standardfilterdialog|cond4" msgid "Smallest" msgstr "最小" #. hMurH -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:494 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:488 msgctxt "standardfilterdialog|cond4" msgid "Largest %" msgstr "最大 %" #. ESYEN -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:495 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:489 msgctxt "standardfilterdialog|cond4" msgid "Smallest %" msgstr "最小 %" #. 6CHum -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:496 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:490 msgctxt "standardfilterdialog|cond4" msgid "Contains" msgstr "包含" #. bUJHq -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:497 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:491 msgctxt "standardfilterdialog|cond4" msgid "Does not contain" msgstr "不包含" #. Mxkrk -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:498 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:492 msgctxt "standardfilterdialog|cond4" msgid "Begins with" msgstr "開頭是" #. Ap7Zm -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:499 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:493 msgctxt "standardfilterdialog|cond4" msgid "Does not begin with" msgstr "開頭不是" #. jsUZ4 -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:500 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:494 msgctxt "standardfilterdialog|cond4" msgid "Ends with" msgstr "結尾是" #. FwJWT -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:501 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:495 msgctxt "standardfilterdialog|cond4" msgid "Does not end with" msgstr "結尾不是" #. ieYAs -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:505 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:499 msgctxt "standardfilterdialog|cond4-atkobject" msgid "Condition 4" msgstr "條件 4" #. FRhsT -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:531 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:525 msgctxt "standardfilterdialog|val1-atkobject" msgid "Value 1" msgstr "值 1" #. uyZGo -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:532 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:526 msgctxt "standardfilterdialog|extended_tip|val1" msgid "Specifies a value to filter the field." msgstr "" #. YVkFu -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:558 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:552 msgctxt "standardfilterdialog|val2-atkobject" msgid "Value 2" msgstr "值 2" #. mwesR -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:559 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:553 msgctxt "standardfilterdialog|extended_tip|val2" msgid "Specifies a value to filter the field." msgstr "" #. aSAHM -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:585 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:579 msgctxt "standardfilterdialog|val3-atkobject" msgid "Value 3" msgstr "值 3" #. nnX9i -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:586 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:580 msgctxt "standardfilterdialog|extended_tip|val3" msgid "Specifies a value to filter the field." msgstr "" #. zuaTh -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:609 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:603 msgctxt "standardfilterdialog|val4-atkobject" msgid "Value 4" msgstr "值 4" #. LyiFB -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:623 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:617 msgctxt "standardfilterdialog|remove1|tooltip_text" msgid "Remove" msgstr "" #. snJCB -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:637 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:631 msgctxt "standardfilterdialog|remove2|tooltip_text" msgid "Remove" msgstr "" #. 8ti5o -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:651 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:645 msgctxt "standardfilterdialog|remove3|tooltip_text" msgid "Remove" msgstr "" #. y4aPN -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:665 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:659 msgctxt "standardfilterdialog|remove4|tooltip_text" msgid "Remove" msgstr "" #. ekQLB -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:695 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:687 msgctxt "standardfilterdialog|label1" msgid "Filter Criteria" msgstr "篩選準則" #. L6LRF -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:735 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:727 msgctxt "standardfilterdialog|case" msgid "_Case sensitive" msgstr "區分字母大小寫(_C)" #. juNCs -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:745 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:737 msgctxt "standardfilterdialog|extended_tip|case" msgid "Distinguishes between uppercase and lowercase letters when filtering the data." msgstr "篩選資料時區分字母大小寫。" #. yud2Z -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:756 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:748 msgctxt "standardfilterdialog|header" msgid "Range c_ontains column labels" msgstr "範圍含有欄標籤(_O)" #. C5Muz -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:766 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:758 msgctxt "standardfilterdialog|extended_tip|header" msgid "Includes the column labels in the first row of a cell range." msgstr "在儲存格範圍的第一列中包含欄標籤。" #. 4ZVQy -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:777 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:769 msgctxt "standardfilterdialog|regexp" msgid "Regular _expressions" msgstr "常規表述式(_E)" #. CVKch -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:787 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:779 msgctxt "standardfilterdialog|extended_tip|regexp" msgid "Allows you to use regular expressions in the filter definition." msgstr "允許您在篩選定義中使用萬用字元。" #. Y8AtC -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:798 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:790 msgctxt "standardfilterdialog|unique" msgid "_No duplications" msgstr "無重複(_N)" #. EiBMm -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:808 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:800 msgctxt "standardfilterdialog|extended_tip|unique" msgid "Excludes duplicate rows in the list of filtered data." msgstr "在篩選出的資料清單中排除重複列。" #. BRiA2 -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:819 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:811 msgctxt "standardfilterdialog|copyresult" msgid "Co_py results to:" msgstr "複製結果到(_P)：" #. vapFg -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:833 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:825 msgctxt "standardfilterdialog|extended_tip|copyresult" msgid "Select the check box, and then select the cell range where you want to display the filter results." msgstr "選取此核取方塊，然後選取用於顯示篩選結果的儲存格範圍。" #. wDy43 -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:844 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:836 msgctxt "standardfilterdialog|destpers" msgid "_Keep filter criteria" msgstr "保留篩選準則(_K)" #. rSZi5 -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:854 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:846 msgctxt "standardfilterdialog|extended_tip|destpers" msgid "Select the Copy results to check box, and then specify the destination range where you want to display the filtered data. If this box is checked, the destination range remains linked to the source range. You must have defined the source range under Data - Define range as a database range." msgstr "選取 [複製結果到] 核取方塊，然後指定用於顯示篩選出的資料之目標範圍。如果已核取此方塊，目標範圍將與來源範圍保持連結。您必須已在 [資料] - [定義範圍] 下，將來源範圍定義為資料庫範圍。" #. StG9B -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:886 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:878 msgctxt "standardfilterdialog|lbcopyarea-atkobject" msgid "Copy results to" msgstr "複製結果到" #. ETDiJ -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:887 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:879 msgctxt "standardfilterdialog|extended_tip|lbcopyarea" msgid "Select the check box, and then select the cell range where you want to display the filter results." msgstr "選取此核取方塊，然後選取用於顯示篩選結果的儲存格範圍。" #. aX8Ar -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:908 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:900 msgctxt "standardfilterdialog|edcopyarea-atkobject" msgid "Copy results to" msgstr "複製結果到" #. om6jr -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:909 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:901 msgctxt "standardfilterdialog|extended_tip|edcopyarea" msgid "Select the check box, and then select the cell range where you want to display the filter results." msgstr "選取此核取方塊，然後選取用於顯示篩選結果的儲存格範圍。" #. WSVsk -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:928 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:920 msgctxt "standardfilterdialog|extended_tip|rbcopyarea" msgid "Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size." msgstr "" #. 4PyDb -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:953 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:945 msgctxt "standardfilterdialog|dbarealabel" msgid "Data range:" msgstr "資料範圍：" #. VBZEp -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:966 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:958 msgctxt "standardfilterdialog|dbarea" msgid "dummy" msgstr "樣本" #. V5ao2 -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:986 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:978 msgctxt "standardfilterdialog|label6" msgid "Op_tions" msgstr "選項(_T)" #. q3HXT -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:992 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:984 msgctxt "standardfilterdialog|extended_tip|more" msgid "Shows additional filter options." msgstr "顯示其他篩選器選項。" #. NNCfP -#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:1015 +#: sc/uiconfig/scalc/ui/standardfilterdialog.ui:1007 msgctxt "standardfilterdialog|extended_tip|StandardFilterDialog" msgid "Specifies the logical conditions to filter your table data." msgstr "" #. uBMEs -#: sc/uiconfig/scalc/ui/statisticsinfopage.ui:28 +#: sc/uiconfig/scalc/ui/statisticsinfopage.ui:24 msgctxt "statisticsinfopage|label6" msgid "Pages:" msgstr "頁面：" #. 4NfcR -#: sc/uiconfig/scalc/ui/statisticsinfopage.ui:54 +#: sc/uiconfig/scalc/ui/statisticsinfopage.ui:50 msgctxt "statisticsinfopage|label5" msgid "Cells:" msgstr "儲存格：" #. TNBHA -#: sc/uiconfig/scalc/ui/statisticsinfopage.ui:80 +#: sc/uiconfig/scalc/ui/statisticsinfopage.ui:76 msgctxt "statisticsinfopage|label2" msgid "Sheets:" msgstr "工作表：" #. BnU73 -#: sc/uiconfig/scalc/ui/statisticsinfopage.ui:107 +#: sc/uiconfig/scalc/ui/statisticsinfopage.ui:103 msgctxt "statisticsinfopage|label3" msgid "Formula groups:" msgstr "公式群組：" #. StkZk -#: sc/uiconfig/scalc/ui/statisticsinfopage.ui:137 +#: sc/uiconfig/scalc/ui/statisticsinfopage.ui:131 msgctxt "statisticsinfopage|label1" msgid "Document: " msgstr "文件： " @@ -31162,109 +31299,109 @@ msgid "Specify the settings for up to three subtotal groups. Each tab has the sa msgstr "最多指定三個小計群組的設定。每個標籤都具有相同的版面配置。" #. xPviB -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:36 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:30 msgctxt "subtotaloptionspage|pagebreak" msgid "_Page break between groups" msgstr "群組之間分頁(_P)" #. LRtCo -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:46 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:40 msgctxt "subtotaloptionspage|extended_tip|pagebreak" msgid "Inserts a new page after each group of subtotaled data." msgstr "在每個小計資料群組之後插入一個新頁面。" #. vAGGF -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:57 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:51 msgctxt "subtotaloptionspage|case" msgid "_Case sensitive" msgstr "區分字母大小寫(_C)" #. hFBdv -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:67 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:61 msgctxt "subtotaloptionspage|extended_tip|case" msgid "Recalculates subtotals when you change the case of a data label." msgstr "變更資料標籤的大小寫時，重新計算小計。" #. srkjs -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:78 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:72 msgctxt "subtotaloptionspage|sort" msgid "Pre-_sort area according to groups" msgstr "區塊先根據群組預先排序(_S)" #. NrBZG -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:88 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:82 msgctxt "subtotaloptionspage|extended_tip|sort" msgid "Sorts the area that you selected in the Group by box of the Group tabs according to the columns that you selected." msgstr "依所選欄排序群組標籤上 [群組依據] 方塊中選取的區域。" #. 6jJEr -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:105 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:97 msgctxt "subtotaloptionspage|label1" msgid "Groups" msgstr "群組" #. C2NEu -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:144 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:130 msgctxt "subtotaloptionspage|ascending" msgid "_Ascending" msgstr "升序(_A)" #. D75dE -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:155 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:141 msgctxt "subtotaloptionspage|extended_tip|ascending" msgid "Sorts beginning with the lowest value. You can define the sort rules on Data - Sort - Options." msgstr "" #. maa6m -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:166 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:152 msgctxt "subtotaloptionspage|descending" msgid "D_escending" msgstr "降序(_E)" #. 8iUpi -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:178 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:164 msgctxt "subtotaloptionspage|extended_tip|descending" msgid "Sorts beginning with the highest value. You can define the sort rules on Data - Sort - Options." msgstr "" #. EGqiq -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:189 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:175 msgctxt "subtotaloptionspage|formats" msgid "I_nclude formats" msgstr "包含格式(_N)" #. gCtKR -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:199 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:185 msgctxt "subtotaloptionspage|extended_tip|formats" msgid "Considers formatting attributes when sorting." msgstr "排序時考慮格式屬性。" #. 4rGHy -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:210 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:196 msgctxt "subtotaloptionspage|btnuserdef" msgid "C_ustom sort order" msgstr "自訂排序(_U)" #. EP8RH -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:223 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:209 msgctxt "subtotaloptionspage|extended_tip|btnuserdef" msgid "Uses a custom sorting order that you defined in the Options dialog box at %PRODUCTNAME Calc - Sort Lists." msgstr "" #. T5A7R -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:242 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:228 msgctxt "subtotaloptionspage|extended_tip|lbuserdef" msgid "Uses a custom sorting order that you defined in the Options dialog box at %PRODUCTNAME Calc - Sort Lists." msgstr "" #. fEyTF -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:259 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:243 msgctxt "subtotaloptionspage|label2" msgid "Sort" msgstr "排序" #. ikECk -#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:274 +#: sc/uiconfig/scalc/ui/subtotaloptionspage.ui:258 msgctxt "subtotaloptionspage|extended_tip|SubTotalOptionsPage" msgid "Specify the settings for calculating and presenting subtotals." msgstr "" @@ -31282,259 +31419,259 @@ msgid "Text Import" msgstr "文字匯入" #. 5eKmk -#: sc/uiconfig/scalc/ui/textimportcsv.ui:123 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:119 msgctxt "textimportcsv|textcharset" msgid "Ch_aracter set:" msgstr "字元集(_A)：" #. 8Gbou -#: sc/uiconfig/scalc/ui/textimportcsv.ui:137 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:133 msgctxt "textimportcsv|textlanguage" msgid "_Language:" msgstr "語言(_L)：" #. GAQTV -#: sc/uiconfig/scalc/ui/textimportcsv.ui:151 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:147 msgctxt "textimportcsv|textfromrow" msgid "From ro_w:" msgstr "取自列(_W)：" #. 5fBmk -#: sc/uiconfig/scalc/ui/textimportcsv.ui:167 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:163 msgctxt "textimportcsv|extended_tip|charset" msgid "Specifies the character set to be used in the imported file." msgstr "指定匯入的檔案中所要使用的字元集。" #. FM2uG -#: sc/uiconfig/scalc/ui/textimportcsv.ui:182 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:178 msgctxt "textimportcsv|extended_tip|language" msgid "Determines how the number strings are imported." msgstr "決定數字串該怎麼匯入。" #. DFFzE -#: sc/uiconfig/scalc/ui/textimportcsv.ui:200 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:196 msgctxt "textimportcsv|extended_tip|fromrow" msgid "Specifies the row where you want to start the import." msgstr "指定從哪一列開始匯入。" #. nxMFN -#: sc/uiconfig/scalc/ui/textimportcsv.ui:217 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:211 msgctxt "textimportcsv|label1" msgid "Import" msgstr "匯入" #. RpRBk -#: sc/uiconfig/scalc/ui/textimportcsv.ui:259 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:248 msgctxt "textimportcsv|tofixedwidth" msgid "_Fixed width" msgstr "固定寬度(_F)" #. kKMbP -#: sc/uiconfig/scalc/ui/textimportcsv.ui:269 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:258 msgctxt "textimportcsv|extended_tip|tofixedwidth" msgid "Separates fixed-width data (equal number of characters) into columns." msgstr "將固定寬度的資料（相等字元數）分隔為欄。" #. 9eEuK -#: sc/uiconfig/scalc/ui/textimportcsv.ui:281 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:270 msgctxt "textimportcsv|toseparatedby" msgid "_Separated by" msgstr "分隔記號(_S)" #. FYdcR -#: sc/uiconfig/scalc/ui/textimportcsv.ui:291 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:280 msgctxt "textimportcsv|extended_tip|toseparatedby" msgid "Select the separator used in your data." msgstr "選取資料中使用的分隔符。" #. 2BKqB -#: sc/uiconfig/scalc/ui/textimportcsv.ui:324 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:308 msgctxt "textimportcsv|tab" msgid "_Tab" msgstr "定位鍵(_T)" #. J6vVR -#: sc/uiconfig/scalc/ui/textimportcsv.ui:334 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:318 msgctxt "textimportcsv|extended_tip|tab" msgid "Separates data delimited by tabs into columns." msgstr "將用定位鍵分隔的資料分隔為欄。" #. YQ88b -#: sc/uiconfig/scalc/ui/textimportcsv.ui:345 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:329 msgctxt "textimportcsv|mergedelimiters" msgid "Merge _delimiters" msgstr "壓縮顯示(_D)" #. EMxAD -#: sc/uiconfig/scalc/ui/textimportcsv.ui:356 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:340 msgctxt "textimportcsv|extended_tip|mergedelimiters" msgid "Combines consecutive delimiters and removes blank data fields." msgstr "合併連續的分隔符並移除空白資料欄位。" #. fZFyK -#: sc/uiconfig/scalc/ui/textimportcsv.ui:368 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:352 msgctxt "textimportcsv|removespace" msgid "Tr_im spaces" msgstr "裁剪空間(_I)" #. EszGB -#: sc/uiconfig/scalc/ui/textimportcsv.ui:379 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:363 msgctxt "textimportcsv|extended_tip|removespace" msgid "Removes starting and trailing spaces from data fields." msgstr "" #. 5Jq8o -#: sc/uiconfig/scalc/ui/textimportcsv.ui:391 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:375 msgctxt "textimportcsv|comma" msgid "_Comma" msgstr "逗號(_C)" #. RWucu -#: sc/uiconfig/scalc/ui/textimportcsv.ui:401 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:385 msgctxt "textimportcsv|extended_tip|comma" msgid "Separates data delimited by commas into columns." msgstr "將用逗號分隔的資料分隔為欄。" #. aKEWs -#: sc/uiconfig/scalc/ui/textimportcsv.ui:412 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:396 msgctxt "textimportcsv|semicolon" msgid "S_emicolon" msgstr "分號(_E)" #. dDCtR -#: sc/uiconfig/scalc/ui/textimportcsv.ui:422 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:406 msgctxt "textimportcsv|extended_tip|semicolon" msgid "Separates data delimited by semicolons into columns." msgstr "將用分號分隔的資料分隔成欄。" #. jhHJJ -#: sc/uiconfig/scalc/ui/textimportcsv.ui:433 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:417 msgctxt "textimportcsv|space" msgid "S_pace" msgstr "空格(_P)" #. jbuEn -#: sc/uiconfig/scalc/ui/textimportcsv.ui:443 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:427 msgctxt "textimportcsv|extended_tip|space" msgid "Separates data delimited by spaces into columns." msgstr "將空格所分隔的資料分隔成欄。" #. Pn4Gr -#: sc/uiconfig/scalc/ui/textimportcsv.ui:461 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:445 msgctxt "textimportcsv|other" msgid "Othe_r" msgstr "其他(_R)" #. aCntQ -#: sc/uiconfig/scalc/ui/textimportcsv.ui:473 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:457 msgctxt "textimportcsv|extended_tip|other" msgid "Separates data into columns using the custom separator that you specify. Note: The custom separator must also be contained in your data." msgstr "" #. smjGu -#: sc/uiconfig/scalc/ui/textimportcsv.ui:495 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:479 msgctxt "textimportcsv|inputother-atkobject" msgid "Other" msgstr "其他" #. Cgx6M -#: sc/uiconfig/scalc/ui/textimportcsv.ui:496 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:480 msgctxt "textimportcsv|extended_tip|inputother" msgid "Separates data into columns using the custom separator that you specify. Note: The custom separator must also be contained in your data." msgstr "" #. B5nFB -#: sc/uiconfig/scalc/ui/textimportcsv.ui:522 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:506 msgctxt "textimportcsv|texttextdelimiter" msgid "Strin_g delimiter:" msgstr "字串分隔符(_G)：" #. KAwBj -#: sc/uiconfig/scalc/ui/textimportcsv.ui:547 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:531 msgctxt "textimportcsv|extended_tip|textdelimiter" msgid "Select a character to delimit text data. You can also enter a character in the text box." msgstr "" #. nPRdc -#: sc/uiconfig/scalc/ui/textimportcsv.ui:579 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:559 msgctxt "textimportcsv|separatoroptions" msgid "Separator Options" msgstr "分隔符選項" #. 3jny5 -#: sc/uiconfig/scalc/ui/textimportcsv.ui:613 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:589 msgctxt "textimportcsv|quotedfieldastext" msgid "F_ormat quoted field as text" msgstr "括住的欄位為文字(_O)" #. VAC6B -#: sc/uiconfig/scalc/ui/textimportcsv.ui:622 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:598 msgctxt "textimportcsv|extended_tip|quotedfieldastext" msgid "When this option is enabled, fields or cells whose values are quoted in their entirety (the first and last characters of the value equal the text delimiter) are imported as text." msgstr "" #. nBNfT -#: sc/uiconfig/scalc/ui/textimportcsv.ui:634 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:610 msgctxt "textimportcsv|detectspecialnumbers" msgid "Detect special _numbers" msgstr "偵測特殊數字(_N)" #. zYGMs -#: sc/uiconfig/scalc/ui/textimportcsv.ui:643 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:619 msgctxt "textimportcsv|extended_tip|detectspecialnumbers" msgid "When this option is enabled, Calc will automatically detect all number formats, including special number formats such as dates, time, and scientific notation." msgstr "" #. fBAv9 -#: sc/uiconfig/scalc/ui/textimportcsv.ui:655 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:631 msgctxt "textimportcsv|skipemptycells" msgid "S_kip empty cells" msgstr "略過空白儲存格(_K)" #. BpC82 -#: sc/uiconfig/scalc/ui/textimportcsv.ui:659 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:635 msgctxt "textimportcsv|skipemptycells" msgid "If enabled, blank cells in source will not override the target." msgstr "若啟用，則來源中的空白儲存格不會凌駕目標儲存格。" #. tEG2b -#: sc/uiconfig/scalc/ui/textimportcsv.ui:665 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:641 msgctxt "textimportcsv|extended_tip|skipemptycells" msgid "When this option is enabled, Calc preserves previous content of cells when pasting empty ones. Otherwise, Calc deletes content of previous cells." msgstr "" #. PBycV -#: sc/uiconfig/scalc/ui/textimportcsv.ui:683 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:657 msgctxt "textimportcsv|label3" msgid "Other Options" msgstr "其他選項" #. 6FhCS -#: sc/uiconfig/scalc/ui/textimportcsv.ui:725 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:695 msgctxt "textimportcsv|textcolumntype" msgid "Column t_ype:" msgstr "欄的類型(_Y)：" #. XDFnr -#: sc/uiconfig/scalc/ui/textimportcsv.ui:741 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:711 msgctxt "textimportcsv|extended_tip|columntype" msgid "Choose a column in the preview window and select the data type to be applied the imported data." msgstr "" #. A79gL -#: sc/uiconfig/scalc/ui/textimportcsv.ui:820 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:790 msgctxt "textimportcsv|textalttitle" msgid "Text to Columns" msgstr "文字轉換為欄" #. XjAZq -#: sc/uiconfig/scalc/ui/textimportcsv.ui:836 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:804 msgctxt "textimportcsv|label4" msgid "Fields" msgstr "欄位指令" #. t6zdn -#: sc/uiconfig/scalc/ui/textimportcsv.ui:868 +#: sc/uiconfig/scalc/ui/textimportcsv.ui:836 msgctxt "textimportcsv|extended_tip|TextImportCsvDialog" msgid "Sets the import options for delimited data." msgstr "設定分隔資料的匯入選項。" @@ -31546,31 +31683,31 @@ msgid "Import Options" msgstr "匯入選項" #. Ug4iB -#: sc/uiconfig/scalc/ui/textimportoptions.ui:105 +#: sc/uiconfig/scalc/ui/textimportoptions.ui:101 msgctxt "textimportoptions|custom" msgid "Custom:" msgstr "自訂：" #. DnkxF -#: sc/uiconfig/scalc/ui/textimportoptions.ui:121 +#: sc/uiconfig/scalc/ui/textimportoptions.ui:117 msgctxt "textimportoptions|automatic" msgid "Automatic" msgstr "自動" #. FMRA7 -#: sc/uiconfig/scalc/ui/textimportoptions.ui:155 +#: sc/uiconfig/scalc/ui/textimportoptions.ui:149 msgctxt "textimportoptions|label2" msgid "Select the Language to Use for Import" msgstr "選取匯入用的語言" #. iRYr7 -#: sc/uiconfig/scalc/ui/textimportoptions.ui:182 +#: sc/uiconfig/scalc/ui/textimportoptions.ui:170 msgctxt "textimportoptions|convertdata" msgid "Detect special numbers (such as dates)" msgstr "偵測特殊數字 (例如日期)。" #. 6aP7U -#: sc/uiconfig/scalc/ui/textimportoptions.ui:197 +#: sc/uiconfig/scalc/ui/textimportoptions.ui:185 msgctxt "textimportoptions|label3" msgid "Options" msgstr "選項" @@ -31624,385 +31761,385 @@ msgid "Cancel" msgstr "取消" #. D7zk3 -#: sc/uiconfig/scalc/ui/tpviewpage.ui:35 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:31 msgctxt "tpviewpage|formula" msgid "_Formulas" msgstr "公式(_F)" #. NZfqW -#: sc/uiconfig/scalc/ui/tpviewpage.ui:44 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:40 msgctxt "extended_tip|formula" msgid "Specifies whether to show formulas instead of results in the cells." msgstr "" #. a9dGg -#: sc/uiconfig/scalc/ui/tpviewpage.ui:55 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:51 msgctxt "tpviewpage|nil" msgid "Zero val_ues" msgstr "零值(_U)" #. p3GbC -#: sc/uiconfig/scalc/ui/tpviewpage.ui:64 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:60 msgctxt "extended_tip|nil" msgid "Specifies whether to show numbers with the value of 0." msgstr "" #. CVAZD -#: sc/uiconfig/scalc/ui/tpviewpage.ui:75 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:71 msgctxt "tpviewpage|annot" msgid "_Comment indicator" msgstr "評註指示標記(_C)" #. gbz6Y -#: sc/uiconfig/scalc/ui/tpviewpage.ui:84 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:80 msgctxt "extended_tip|annot" msgid "Specifies that a small rectangle in the top right corner of the cell indicates that a comment exists. The comment will be shown only when you enable tips under %PRODUCTNAME - General in the Options dialog box." msgstr "" #. G6GjE -#: sc/uiconfig/scalc/ui/tpviewpage.ui:95 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:91 msgctxt "tpviewpage|value" msgid "Value h_ighlighting" msgstr "數值色彩標明(_I)" #. Ve6Bg -#: sc/uiconfig/scalc/ui/tpviewpage.ui:104 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:100 msgctxt "extended_tip|value" msgid "Mark the Value highlighting box to show the cell contents in different colors, depending on type. Text cells are formatted in black, formulas in green, number cells in blue, and protected cells are shown with light grey background, no matter how their display is formatted." msgstr "" #. ah84V -#: sc/uiconfig/scalc/ui/tpviewpage.ui:115 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:111 msgctxt "tpviewpage|anchor" msgid "_Anchor" msgstr "錨定(_A)" #. B5SJi -#: sc/uiconfig/scalc/ui/tpviewpage.ui:124 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:120 msgctxt "extended_tip|anchor" msgid "Specifies whether the anchor icon is displayed when an inserted object, such as a graphic, is selected." msgstr "" #. XBGqd -#: sc/uiconfig/scalc/ui/tpviewpage.ui:135 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:131 msgctxt "tpviewpage|clipmark" msgid "Te_xt overflow" msgstr "文字溢位(_X)" #. qSy8Z -#: sc/uiconfig/scalc/ui/tpviewpage.ui:144 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:140 msgctxt "extended_tip|clipmark" msgid "If a cell contains text that is wider than the width of the cell, the text is displayed over empty neighboring cells in the same row. If there is no empty neighboring cell, a small triangle at the cell border indicates that the text continues." msgstr "" #. aqEWS -#: sc/uiconfig/scalc/ui/tpviewpage.ui:155 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:151 msgctxt "tpviewpage|rangefind" msgid "_Show references in color" msgstr "用彩色顯示參照(_S)" #. hSxKG -#: sc/uiconfig/scalc/ui/tpviewpage.ui:164 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:160 msgctxt "extended_tip|rangefind" msgid "Specifies that each reference is highlighted in color in the formula. The cell range is also enclosed by a colored border as soon as the cell containing the reference is selected for editing." msgstr "" #. qtccR -#: sc/uiconfig/scalc/ui/tpviewpage.ui:181 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:175 msgctxt "tpviewpage|label4" msgid "Display" msgstr "顯示" #. oCEpm -#: sc/uiconfig/scalc/ui/tpviewpage.ui:212 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:202 msgctxt "tpviewpage|rowcolheader" msgid "Colu_mn/row headers" msgstr "欄標列號(_M)" #. sF7Bk -#: sc/uiconfig/scalc/ui/tpviewpage.ui:221 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:211 msgctxt "extended_tip|rowcolheader" msgid "Specifies whether to display row and column headers." msgstr "" #. WAwjG -#: sc/uiconfig/scalc/ui/tpviewpage.ui:232 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:222 msgctxt "tpviewpage|hscroll" msgid "Hori_zontal scroll bar" msgstr "水平捲軸列(_Z)" #. EpixW -#: sc/uiconfig/scalc/ui/tpviewpage.ui:241 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:231 msgctxt "extended_tip|hscroll" msgid "Specifies whether to display a horizontal scrollbar at the bottom of the document window." msgstr "" #. PZvCk -#: sc/uiconfig/scalc/ui/tpviewpage.ui:252 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:242 msgctxt "tpviewpage|vscroll" msgid "_Vertical scroll bar" msgstr "垂直捲軸列(_V)" #. yhyGB -#: sc/uiconfig/scalc/ui/tpviewpage.ui:261 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:251 msgctxt "extended_tip|vscroll" msgid "Specifies whether to display a vertical scrollbar at the right of the document window." msgstr "" #. rPmMd -#: sc/uiconfig/scalc/ui/tpviewpage.ui:272 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:262 msgctxt "tpviewpage|tblreg" msgid "Sh_eet tabs" msgstr "工作表標籤(_E)" #. aBrX6 -#: sc/uiconfig/scalc/ui/tpviewpage.ui:281 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:271 msgctxt "extended_tip|tblreg" msgid "Specifies whether to display the sheet tabs at the bottom of the spreadsheet document." msgstr "" #. WJSnC -#: sc/uiconfig/scalc/ui/tpviewpage.ui:292 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:282 msgctxt "tpviewpage|outline" msgid "_Outline symbols" msgstr "大綱符號(_O)" #. hhB5n -#: sc/uiconfig/scalc/ui/tpviewpage.ui:301 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:291 msgctxt "extended_tip|outline" msgid "If you have defined an outline, the Outline symbols option specifies whether to view the outline symbols at the border of the sheet." msgstr "" #. jJ4uB -#: sc/uiconfig/scalc/ui/tpviewpage.ui:312 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:302 msgctxt "tpviewpage|summary" msgid "Summary o_n search" msgstr "搜尋摘要(_N)" #. Ws4Ev -#: sc/uiconfig/scalc/ui/tpviewpage.ui:334 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:322 msgctxt "tpviewpage|label5" msgid "Window" msgstr "視窗" #. g4FQY -#: sc/uiconfig/scalc/ui/tpviewpage.ui:360 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:342 msgctxt "tpviewpage|synczoom" msgid "S_ynchronize sheets" msgstr "同步工作表(_Y)" #. C5GAq -#: sc/uiconfig/scalc/ui/tpviewpage.ui:369 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:353 msgctxt "extended_tip|synczoom" msgid "If checked, all sheets are shown with the same zoom factor. If not checked, each sheet can have its own zoom factor." msgstr "若核取此選項，則所有試算表將以相同的縮放係數顯示。若未核取，則每個試算表有各自的縮放係數。" #. pEFjC -#: sc/uiconfig/scalc/ui/tpviewpage.ui:380 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:362 msgctxt "tpviewpage|label3" msgid "Zoom" msgstr "遠近調整" #. yajBD -#: sc/uiconfig/scalc/ui/tpviewpage.ui:430 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:408 msgctxt "extended_tip|color" msgid "Specifies a color for the grid lines in the current document." msgstr "" #. bF3Yr -#: sc/uiconfig/scalc/ui/tpviewpage.ui:443 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:421 msgctxt "tpviewpage|grid_label" msgid "_Grid lines:" msgstr "格線(_G)：" #. E2U6D -#: sc/uiconfig/scalc/ui/tpviewpage.ui:457 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:435 msgctxt "tpviewpage|color_label" msgid "_Color:" msgstr "色彩(_C)：" #. BUibB -#: sc/uiconfig/scalc/ui/tpviewpage.ui:472 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:450 msgctxt "tpviewpage|grid" msgid "Show" msgstr "顯示" #. GXPYd -#: sc/uiconfig/scalc/ui/tpviewpage.ui:473 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:451 msgctxt "tpviewpage|grid" msgid "Show on colored cells" msgstr "顯示於上色的儲存格" #. ucTDZ -#: sc/uiconfig/scalc/ui/tpviewpage.ui:474 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:452 msgctxt "tpviewpage|grid" msgid "Hide" msgstr "隱藏" #. vFtNT -#: sc/uiconfig/scalc/ui/tpviewpage.ui:478 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:456 msgctxt "extended_tip|grid" msgid "Specifies when grid lines will be displayed. Default is to display grid lines only on cells that do not have a background color. You can choose to also display grid lines on cells with background color, or to hide them." msgstr "" #. ShHLd -#: sc/uiconfig/scalc/ui/tpviewpage.ui:495 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:473 msgctxt "tpviewpage|break" msgid "_Page breaks" msgstr "分頁(_P)" #. Vc5tW -#: sc/uiconfig/scalc/ui/tpviewpage.ui:504 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:482 msgctxt "extended_tip|break" msgid "Specifies whether to view the page breaks within a defined print area." msgstr "" #. xkuBL -#: sc/uiconfig/scalc/ui/tpviewpage.ui:515 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:493 msgctxt "tpviewpage|guideline" msgid "Helplines _while moving" msgstr "移動時採用輔助線(_W)" #. KGEQG -#: sc/uiconfig/scalc/ui/tpviewpage.ui:524 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:502 msgctxt "extended_tip|guideline" msgid "Specifies whether to view guides when moving drawings, frames, graphics and other objects." msgstr "" #. Cb4AM -#: sc/uiconfig/scalc/ui/tpviewpage.ui:541 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:517 msgctxt "tpviewpage|label1" msgid "Visual Aids" msgstr "視覺輔助" #. Qd5Rp -#: sc/uiconfig/scalc/ui/tpviewpage.ui:576 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:548 msgctxt "tpviewpage|objgrf_label" msgid "Ob_jects/Images:" msgstr "物件/影像(_J)：" #. BCaDn -#: sc/uiconfig/scalc/ui/tpviewpage.ui:590 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:562 msgctxt "tpviewpage|diagram_label" msgid "Cha_rts:" msgstr "圖表(_R)：" #. q544D -#: sc/uiconfig/scalc/ui/tpviewpage.ui:604 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:576 msgctxt "tpviewpage|draw_label" msgid "_Drawing objects:" msgstr "繪圖物件(_D)：" #. mpELg -#: sc/uiconfig/scalc/ui/tpviewpage.ui:619 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:591 msgctxt "tpviewpage|objgrf" msgid "Show" msgstr "顯示" #. Kx6yJ -#: sc/uiconfig/scalc/ui/tpviewpage.ui:620 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:592 msgctxt "tpviewpage|objgrf" msgid "Hide" msgstr "隱藏" #. oKpbX -#: sc/uiconfig/scalc/ui/tpviewpage.ui:624 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:596 msgctxt "extended_tip|objgrf" msgid "Defines if objects and graphics are shown or hidden." msgstr "" #. wFBeZ -#: sc/uiconfig/scalc/ui/tpviewpage.ui:638 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:610 msgctxt "tpviewpage|diagram" msgid "Show" msgstr "顯示" #. H7MAB -#: sc/uiconfig/scalc/ui/tpviewpage.ui:639 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:611 msgctxt "tpviewpage|diagram" msgid "Hide" msgstr "隱藏" #. oVE9C -#: sc/uiconfig/scalc/ui/tpviewpage.ui:643 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:615 msgctxt "extended_tip|diagram" msgid "Defines if charts in your document are shown or hidden." msgstr "" #. YaiTQ -#: sc/uiconfig/scalc/ui/tpviewpage.ui:657 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:629 msgctxt "tpviewpage|draw" msgid "Show" msgstr "顯示" #. DST5a -#: sc/uiconfig/scalc/ui/tpviewpage.ui:658 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:630 msgctxt "tpviewpage|draw" msgid "Hide" msgstr "隱藏" #. FDGKD -#: sc/uiconfig/scalc/ui/tpviewpage.ui:662 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:634 msgctxt "extended_tip|draw" msgid "Defines if drawing objects in your document are shown or hidden." msgstr "" #. E6GxC -#: sc/uiconfig/scalc/ui/tpviewpage.ui:679 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:649 msgctxt "tpviewpage|label2" msgid "Objects" msgstr "物件" #. aFAnX -#: sc/uiconfig/scalc/ui/tpviewpage.ui:703 +#: sc/uiconfig/scalc/ui/tpviewpage.ui:673 msgctxt "extended_tip|TpViewPage" msgid "Defines which elements of the %PRODUCTNAME Calc main window are displayed. You can also show or hide highlighting of values in tables." msgstr "" #. AnLEa -#: sc/uiconfig/scalc/ui/ttestdialog.ui:99 +#: sc/uiconfig/scalc/ui/ttestdialog.ui:95 msgctxt "ttestdialog|variable1-range-label" msgid "Variable 1 range:" msgstr "變數 1 範圍：" #. SgAwF -#: sc/uiconfig/scalc/ui/ttestdialog.ui:138 +#: sc/uiconfig/scalc/ui/ttestdialog.ui:134 msgctxt "ttestdialog|variable2-range-label" msgid "Variable 2 range:" msgstr "變數 2 範圍：" #. dPc62 -#: sc/uiconfig/scalc/ui/ttestdialog.ui:177 +#: sc/uiconfig/scalc/ui/ttestdialog.ui:173 msgctxt "ttestdialog|output-range-label" msgid "Results to:" msgstr "結果為：" #. FzCYq -#: sc/uiconfig/scalc/ui/ttestdialog.ui:220 +#: sc/uiconfig/scalc/ui/ttestdialog.ui:214 msgctxt "ttestdialog|label1" msgid "Data" msgstr "資料" #. STA6h -#: sc/uiconfig/scalc/ui/ttestdialog.ui:256 +#: sc/uiconfig/scalc/ui/ttestdialog.ui:246 msgctxt "ttestdialog|groupedby-columns-radio" msgid "Columns" msgstr "欄" #. 5cU4i -#: sc/uiconfig/scalc/ui/ttestdialog.ui:272 +#: sc/uiconfig/scalc/ui/ttestdialog.ui:262 msgctxt "ttestdialog|groupedby-rows-radio" msgid "Rows" msgstr "列" #. BPFfu -#: sc/uiconfig/scalc/ui/ttestdialog.ui:294 +#: sc/uiconfig/scalc/ui/ttestdialog.ui:282 msgctxt "ttestdialog|label2" msgid "Grouped by" msgstr "分組依據" #. WGyaE -#: sc/uiconfig/scalc/ui/ttestdialog.ui:319 +#: sc/uiconfig/scalc/ui/ttestdialog.ui:307 msgctxt "ttestdialog|extended_tip|TTestDialog" msgid "Calculates the paired t-Test of two data samples." msgstr "" @@ -32014,19 +32151,19 @@ msgid "Ungroup" msgstr "取消群組" #. bRDDQ -#: sc/uiconfig/scalc/ui/ungroupdialog.ui:99 +#: sc/uiconfig/scalc/ui/ungroupdialog.ui:95 msgctxt "ungroupdialog|rows" msgid "_Rows" msgstr "列(_R)" #. GMCxr -#: sc/uiconfig/scalc/ui/ungroupdialog.ui:116 +#: sc/uiconfig/scalc/ui/ungroupdialog.ui:112 msgctxt "ungroupdialog|cols" msgid "_Columns" msgstr "欄(_C)" #. h7unP -#: sc/uiconfig/scalc/ui/ungroupdialog.ui:140 +#: sc/uiconfig/scalc/ui/ungroupdialog.ui:134 msgctxt "ungroupdialog|includeLabel" msgid "Deactivate for" msgstr "對以下項目關閉" @@ -32290,37 +32427,37 @@ msgid "Displays the message that you enter in the Contents box when the cell or msgstr "當選取了試算表中的儲存格或儲存格範圍時，顯示您在 [內容] 方塊中輸入的訊息。" #. 9NNLK -#: sc/uiconfig/scalc/ui/validationhelptabpage.ui:69 +#: sc/uiconfig/scalc/ui/validationhelptabpage.ui:63 msgctxt "validationhelptabpage|extended_tip|title" msgid "Enter the title that you want to display when the cell or cell range is selected." msgstr "輸入當選取了儲存格或儲存格範圍時要顯示的標題。" #. WZNfj -#: sc/uiconfig/scalc/ui/validationhelptabpage.ui:82 +#: sc/uiconfig/scalc/ui/validationhelptabpage.ui:76 msgctxt "validationhelptabpage|title_label" msgid "_Title:" msgstr "標題(_T)：" #. EHf6R -#: sc/uiconfig/scalc/ui/validationhelptabpage.ui:96 +#: sc/uiconfig/scalc/ui/validationhelptabpage.ui:90 msgctxt "validationhelptabpage|inputhelp_label" msgid "_Input help:" msgstr "輸入說明(_I)：" #. KTTfc -#: sc/uiconfig/scalc/ui/validationhelptabpage.ui:122 +#: sc/uiconfig/scalc/ui/validationhelptabpage.ui:116 msgctxt "validationhelptabpage|extended_tip|inputhelp" msgid "Enter the message that you want to display when the cell or cell range is selected." msgstr "輸入當選取了儲存格或儲存格範圍時要顯示的訊息。" #. epdvk -#: sc/uiconfig/scalc/ui/validationhelptabpage.ui:141 +#: sc/uiconfig/scalc/ui/validationhelptabpage.ui:133 msgctxt "validationhelptabpage|label1" msgid "Contents" msgstr "內容" #. EhEo2 -#: sc/uiconfig/scalc/ui/validationhelptabpage.ui:156 +#: sc/uiconfig/scalc/ui/validationhelptabpage.ui:148 msgctxt "validationhelptabpage|extended_tip|ValidationHelpTabPage" msgid "Enter the message that you want to display when the cell or cell range is selected in the sheet." msgstr "輸入當選取了試算表中的儲存格或儲存格範圍時要顯示的訊息。" @@ -32338,85 +32475,85 @@ msgid "_Import" msgstr "匯入(_I)" #. B5Q88 -#: sc/uiconfig/scalc/ui/xmlsourcedialog.ui:116 +#: sc/uiconfig/scalc/ui/xmlsourcedialog.ui:112 msgctxt "xmlsourcedialog|selectsource|tooltip_text" msgid "Browse to set source file." msgstr "瀏覽以設定來源檔案。" #. WkbPB -#: sc/uiconfig/scalc/ui/xmlsourcedialog.ui:129 +#: sc/uiconfig/scalc/ui/xmlsourcedialog.ui:125 msgctxt "xmlsourcedialog|sourcefile" msgid "- not set -" msgstr "- 未設定 -" #. peiAH -#: sc/uiconfig/scalc/ui/xmlsourcedialog.ui:145 +#: sc/uiconfig/scalc/ui/xmlsourcedialog.ui:139 msgctxt "xmlsourcedialog|label1" msgid "Source File" msgstr "來源檔案" #. QsaTU -#: sc/uiconfig/scalc/ui/xmlsourcedialog.ui:193 +#: sc/uiconfig/scalc/ui/xmlsourcedialog.ui:183 msgctxt "xmlsourcedialog|label5" msgid "Mapped cell:" msgstr "映射的儲存格：" #. eN8dT -#: sc/uiconfig/scalc/ui/xmlsourcedialog.ui:286 +#: sc/uiconfig/scalc/ui/xmlsourcedialog.ui:274 msgctxt "xmlsourcedialog|label4" msgid "Map to Document" msgstr "映射到文件" #. 6A4E9 -#: sc/uiconfig/scalc/ui/xmlsourcedialog.ui:311 +#: sc/uiconfig/scalc/ui/xmlsourcedialog.ui:299 msgctxt "xmlsourcedialog|extended_tip|XMLSourceDialog" msgid "Import XML data in a spreadsheet." msgstr "" #. 5ozTx -#: sc/uiconfig/scalc/ui/ztestdialog.ui:99 +#: sc/uiconfig/scalc/ui/ztestdialog.ui:95 msgctxt "ztestdialog|variable1-range-label" msgid "Variable 1 range:" msgstr "變數 1 範圍：" #. nhD94 -#: sc/uiconfig/scalc/ui/ztestdialog.ui:138 +#: sc/uiconfig/scalc/ui/ztestdialog.ui:134 msgctxt "ztestdialog|variable2-range-label" msgid "Variable 2 range:" msgstr "變數 2 範圍：" #. LEaQJ -#: sc/uiconfig/scalc/ui/ztestdialog.ui:177 +#: sc/uiconfig/scalc/ui/ztestdialog.ui:173 msgctxt "ztestdialog|output-range-label" msgid "Results to:" msgstr "結果為：" #. k62LL -#: sc/uiconfig/scalc/ui/ztestdialog.ui:220 +#: sc/uiconfig/scalc/ui/ztestdialog.ui:214 msgctxt "ztestdialog|label1" msgid "Data" msgstr "資料" #. SnazD -#: sc/uiconfig/scalc/ui/ztestdialog.ui:256 +#: sc/uiconfig/scalc/ui/ztestdialog.ui:246 msgctxt "ztestdialog|groupedby-columns-radio" msgid "Columns" msgstr "欄" #. LWhtJ -#: sc/uiconfig/scalc/ui/ztestdialog.ui:272 +#: sc/uiconfig/scalc/ui/ztestdialog.ui:262 msgctxt "ztestdialog|groupedby-rows-radio" msgid "Rows" msgstr "列" #. Bby3W -#: sc/uiconfig/scalc/ui/ztestdialog.ui:294 +#: sc/uiconfig/scalc/ui/ztestdialog.ui:282 msgctxt "ztestdialog|label2" msgid "Grouped by" msgstr "分組依據" #. bPHtB -#: sc/uiconfig/scalc/ui/ztestdialog.ui:319 +#: sc/uiconfig/scalc/ui/ztestdialog.ui:307 msgctxt "ztestdialog|extended_tip|ZTestDialog" msgid "Calculates the z-Test of two data samples." msgstr "" |