#. extracted from chart2/inc
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: https://bugs.libreoffice.org/enter_bug.cgi?product=LibreOffice&bug_status=UNCONFIRMED&component=UI\n"
"POT-Creation-Date: 2021-02-08 12:08+0100\n"
"PO-Revision-Date: 2020-12-03 21:40+0000\n"
"Last-Translator: Ming Hua <plateauwolf@qq.com>\n"
"Language-Team: Chinese (Simplified) <https://weblate.documentfoundation.org/projects/libo_ui-master/chart2messages/zh_Hans/>\n"
"Language: zh-CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Accelerator-Marker: ~\n"
"X-Generator: LibreOffice\n"
"X-POOTLE-MTIME: 1562193945.000000\n"

#. NCRDD
#: chart2/inc/chart.hrc:16
msgctxt "tp_ChartType|liststore1"
msgid "Bar"
msgstr "条形图"

#. YpLZF
#: chart2/inc/chart.hrc:17
msgctxt "tp_ChartType|liststore1"
msgid "Cylinder"
msgstr "柱状图"

#. VLXhh
#: chart2/inc/chart.hrc:18
msgctxt "tp_ChartType|liststore1"
msgid "Cone"
msgstr "圆锥体"

#. xsWC2
#: chart2/inc/chart.hrc:19
msgctxt "tp_ChartType|liststore1"
msgid "Pyramid"
msgstr "金字塔"

#. wH3TZ
msgctxt "stock"
msgid "_Add"
msgstr ""

#. S9dsC
msgctxt "stock"
msgid "_Apply"
msgstr ""

#. TMo6G
msgctxt "stock"
msgid "_Cancel"
msgstr ""

#. MRCkv
msgctxt "stock"
msgid "_Close"
msgstr ""

#. nvx5t
msgctxt "stock"
msgid "_Delete"
msgstr ""

#. YspCj
msgctxt "stock"
msgid "_Edit"
msgstr ""

#. imQxr
msgctxt "stock"
msgid "_Help"
msgstr ""

#. RbjyB
msgctxt "stock"
msgid "_New"
msgstr ""

#. dx2yy
msgctxt "stock"
msgid "_No"
msgstr ""

#. M9DsL
msgctxt "stock"
msgid "_OK"
msgstr ""

#. VtJS9
msgctxt "stock"
msgid "_Remove"
msgstr ""

#. C69Fy
msgctxt "stock"
msgid "_Reset"
msgstr ""

#. mgpxh
msgctxt "stock"
msgid "_Yes"
msgstr ""

#. v9sqX
#: chart2/inc/strings.hrc:24
msgctxt "STR_DLG_CHART_WIZARD"
msgid "Chart Wizard"
msgstr "图表向导"

#. HCEG9
#: chart2/inc/strings.hrc:25
msgctxt "STR_DLG_SMOOTH_LINE_PROPERTIES"
msgid "Smooth Lines"
msgstr "平滑线"

#. qxGHJ
#: chart2/inc/strings.hrc:26
msgctxt "STR_DLG_STEPPED_LINE_PROPERTIES"
msgid "Stepped Lines"
msgstr "阶梯线"

#. LcVWV
#: chart2/inc/strings.hrc:27
msgctxt "STR_DLG_REMOVE_DATA_TABLE"
msgid "This chart currently contains an internal data table. Do you want to proceed, deleting the internal data table, and set a new data range?"
msgstr "该图表包含了内嵌的数据表格。如果继续，将删除内嵌的数据表格，并设定新的数据区域。确定继续吗？"

#. E2JCT
#: chart2/inc/strings.hrc:28
msgctxt "STR_PAGE_CHARTTYPE"
msgid "Chart Type"
msgstr "图表类型"

#. GFDEv
#: chart2/inc/strings.hrc:29
msgctxt "STR_PAGE_DATA_RANGE"
msgid "Data Range"
msgstr "数据区域"

#. uxZuD
#: chart2/inc/strings.hrc:30
msgctxt "STR_PAGE_CHART_ELEMENTS"
msgid "Chart Elements"
msgstr "图表元素"

#. sDxQz
#: chart2/inc/strings.hrc:31
msgctxt "STR_PAGE_LINE"
msgid "Line"
msgstr "线条"

#. EoKxj
#: chart2/inc/strings.hrc:32
msgctxt "STR_PAGE_BORDER"
msgid "Borders"
msgstr "边框"

#. 2suvG
#: chart2/inc/strings.hrc:33
msgctxt "STR_PAGE_AREA"
msgid "Area"
msgstr "区域"

#. 3sDYn
#: chart2/inc/strings.hrc:34
msgctxt "STR_PAGE_TRANSPARENCY"
msgid "Transparency"
msgstr "透明度"

#. tESet
#: chart2/inc/strings.hrc:35
msgctxt "STR_PAGE_FONT"
msgid "Font"
msgstr "字体"

#. ByYYG
#: chart2/inc/strings.hrc:36
msgctxt "STR_PAGE_FONT_EFFECTS"
msgid "Font Effects"
msgstr "字体效果"

#. YydEQ
#: chart2/inc/strings.hrc:37
msgctxt "STR_PAGE_NUMBERS"
msgid "Numbers"
msgstr "数字"

#. nTFNm
#: chart2/inc/strings.hrc:38
msgctxt "STR_PAGE_POSITION"
msgid "Position"
msgstr "位置"

#. iTeHp
#: chart2/inc/strings.hrc:39
msgctxt "STR_PAGE_LAYOUT"
msgid "Layout"
msgstr "布局"

#. 4Gz8K
#: chart2/inc/strings.hrc:40
msgctxt "STR_PAGE_OPTIONS"
msgid "Options"
msgstr "选项"

#. RCGEN
#: chart2/inc/strings.hrc:41
msgctxt "STR_PAGE_SCALE"
msgid "Scale"
msgstr "缩放比例"

#. QR25P
#: chart2/inc/strings.hrc:42
msgctxt "STR_PAGE_POSITIONING"
msgid "Positioning"
msgstr "定位"

#. omcEo
#: chart2/inc/strings.hrc:43
msgctxt "STR_PAGE_TRENDLINE_TYPE"
msgid "Type"
msgstr "类型"

#. EvFoA
#: chart2/inc/strings.hrc:44
msgctxt "STR_PAGE_XERROR_BARS"
msgid "X Error Bars"
msgstr "X 误差线"

#. NKDFm
#: chart2/inc/strings.hrc:45
msgctxt "STR_PAGE_YERROR_BARS"
msgid "Y Error Bars"
msgstr "Y 误差线"

#. mjAwD
#: chart2/inc/strings.hrc:46
msgctxt "STR_PAGE_ALIGNMENT"
msgid "Alignment"
msgstr "对齐"

#. hXbmP
#: chart2/inc/strings.hrc:47
msgctxt "STR_PAGE_PERSPECTIVE"
msgid "Perspective"
msgstr "透视"

#. 7RHre
#: chart2/inc/strings.hrc:48
msgctxt "STR_PAGE_APPEARANCE"
msgid "Appearance"
msgstr "外观"

#. mvWu8
#: chart2/inc/strings.hrc:49
msgctxt "STR_PAGE_ILLUMINATION"
msgid "Illumination"
msgstr "照明"

#. YBnCa
#: chart2/inc/strings.hrc:50
msgctxt "STR_PAGE_ASIAN"
msgid "Asian Typography"
msgstr "亚洲文字排版"

#. 6xo4a
#: chart2/inc/strings.hrc:51
msgctxt "STR_OBJECT_AVERAGE_LINE_WITH_PARAMETERS"
msgid "Mean value line with value %AVERAGE_VALUE and standard deviation %STD_DEVIATION"
msgstr "值为 %AVERAGE_VALUE 且标准偏差为 %STD_DEVIATION 的均值线"

#. eP9wF
#: chart2/inc/strings.hrc:52
msgctxt "STR_OBJECT_AXIS"
msgid "Axis"
msgstr "轴"

#. jNgVd
#: chart2/inc/strings.hrc:53
msgctxt "STR_OBJECT_AXIS_X"
msgid "X Axis"
msgstr "X 轴"

#. cA4xe
#: chart2/inc/strings.hrc:54
msgctxt "STR_OBJECT_AXIS_Y"
msgid "Y Axis"
msgstr "Y 轴"

#. ZXErW
#: chart2/inc/strings.hrc:55
msgctxt "STR_OBJECT_AXIS_Z"
msgid "Z Axis"
msgstr "Z 轴"

#. qkJUd
#: chart2/inc/strings.hrc:56
msgctxt "STR_OBJECT_SECONDARY_X_AXIS"
msgid "Secondary X Axis"
msgstr "次 X 轴"

#. YHCbM
#: chart2/inc/strings.hrc:57
msgctxt "STR_OBJECT_SECONDARY_Y_AXIS"
msgid "Secondary Y Axis"
msgstr "次 Y 轴"

#. natrx
#: chart2/inc/strings.hrc:58
msgctxt "STR_OBJECT_AXES"
msgid "Axes"
msgstr "轴"

#. FE87Y
#: chart2/inc/strings.hrc:59
msgctxt "STR_OBJECT_GRIDS"
msgid "Grids"
msgstr "网格"

#. zyanU
#: chart2/inc/strings.hrc:60
msgctxt "STR_OBJECT_GRID"
msgid "Grid"
msgstr "网格"

#. pEwe5
#: chart2/inc/strings.hrc:61
msgctxt "STR_OBJECT_GRID_MAJOR_X"
msgid "X Axis Major Grid"
msgstr "X 轴主网格线"

#. ETsPn
#: chart2/inc/strings.hrc:62
msgctxt "STR_OBJECT_GRID_MAJOR_Y"
msgid "Y Axis Major Grid"
msgstr "Y 轴主网格线"

#. SonFW
#: chart2/inc/strings.hrc:63
msgctxt "STR_OBJECT_GRID_MAJOR_Z"
msgid "Z Axis Major Grid"
msgstr "Z 轴主网格线"

#. sBgvb
#: chart2/inc/strings.hrc:64
msgctxt "STR_OBJECT_GRID_MINOR_X"
msgid "X Axis Minor Grid"
msgstr "X 轴次网格线"

#. 3YcEK
#: chart2/inc/strings.hrc:65
msgctxt "STR_OBJECT_GRID_MINOR_Y"
msgid "Y Axis Minor Grid"
msgstr "Y 轴次网格线"

#. hkZQA
#: chart2/inc/strings.hrc:66
msgctxt "STR_OBJECT_GRID_MINOR_Z"
msgid "Z Axis Minor Grid"
msgstr "Z 轴次网格线"

#. HRr84
#: chart2/inc/strings.hrc:67
msgctxt "STR_OBJECT_LEGEND"
msgid "Legend"
msgstr "图例"

#. BKrVD
#: chart2/inc/strings.hrc:68
msgctxt "STR_OBJECT_TITLE"
msgid "Title"
msgstr "标题"

#. daY6i
#: chart2/inc/strings.hrc:69
msgctxt "STR_OBJECT_TITLES"
msgid "Titles"
msgstr "标题"

#. HPrwf
#: chart2/inc/strings.hrc:70
msgctxt "STR_OBJECT_TITLE_MAIN"
msgid "Main Title"
msgstr "主标题"

#. 3HPz3
#: chart2/inc/strings.hrc:71
msgctxt "STR_OBJECT_TITLE_SUB"
msgid "Subtitle"
msgstr "副标题"

#. eZE2v
#: chart2/inc/strings.hrc:72
msgctxt "STR_OBJECT_TITLE_X_AXIS"
msgid "X Axis Title"
msgstr "X 轴标题"

#. uqBii
#: chart2/inc/strings.hrc:73
msgctxt "STR_OBJECT_TITLE_Y_AXIS"
msgid "Y Axis Title"
msgstr "Y 轴标题"

#. 37EU5
#: chart2/inc/strings.hrc:74
msgctxt "STR_OBJECT_TITLE_Z_AXIS"
msgid "Z Axis Title"
msgstr "Z 轴标题"

#. QmoDH
#: chart2/inc/strings.hrc:75
msgctxt "STR_OBJECT_TITLE_SECONDARY_X_AXIS"
msgid "Secondary X Axis Title"
msgstr "次 X 轴标题"

#. F7NWG
#: chart2/inc/strings.hrc:76
msgctxt "STR_OBJECT_TITLE_SECONDARY_Y_AXIS"
msgid "Secondary Y Axis Title"
msgstr "次 Y 轴标题"

#. AtLNM
#: chart2/inc/strings.hrc:77
msgctxt "STR_OBJECT_LABEL"
msgid "Label"
msgstr "标签"

#. ag7pg
#: chart2/inc/strings.hrc:78
msgctxt "STR_OBJECT_DATALABELS"
msgid "Data Labels"
msgstr "数据标签"

#. ts3Cj
#: chart2/inc/strings.hrc:79
msgctxt "STR_OBJECT_DATAPOINT"
msgid "Data Point"
msgstr "数据点"

#. EnsUx
#: chart2/inc/strings.hrc:80
msgctxt "STR_OBJECT_DATAPOINTS"
msgid "Data Points"
msgstr "数据点"

#. CqWnU
#: chart2/inc/strings.hrc:81
msgctxt "STR_OBJECT_LEGEND_SYMBOL"
msgid "Legend Key"
msgstr "图例说明"

#. jNwC8
#: chart2/inc/strings.hrc:82
msgctxt "STR_OBJECT_DATASERIES"
msgid "Data Series"
msgstr "数据序列"

#. Zf7DA
#: chart2/inc/strings.hrc:83
msgctxt "STR_OBJECT_DATASERIES_PLURAL"
msgid "Data Series"
msgstr "数据序列"

#. 3G9WG
#: chart2/inc/strings.hrc:84
msgctxt "STR_OBJECT_CURVE"
msgid "Trend Line"
msgstr "趋势线"

#. 8miGx
#: chart2/inc/strings.hrc:85
msgctxt "STR_OBJECT_CURVES"
msgid "Trend Lines"
msgstr "趋势线"

#. ESVL6
#: chart2/inc/strings.hrc:86
msgctxt "STR_OBJECT_CURVE_WITH_PARAMETERS"
msgid "Trend line %FORMULA with accuracy R² = %RSQUARED"
msgstr "趋势线 %FORMULA，其精度为 R² = %RSQUARED"

#. DrVz3
#: chart2/inc/strings.hrc:87
msgctxt "STR_OBJECT_MOVING_AVERAGE_WITH_PARAMETERS"
msgid "Moving average trend line with period = %PERIOD"
msgstr "周期 = %PERIOD 的移动平均趋势线"

#. mcMQC
#: chart2/inc/strings.hrc:88
msgctxt "STR_OBJECT_AVERAGE_LINE"
msgid "Mean Value Line"
msgstr "均值线"

#. RLMNC
#: chart2/inc/strings.hrc:89
msgctxt "STR_OBJECT_CURVE_EQUATION"
msgid "Equation"
msgstr "方程式"

#. apx4j
#: chart2/inc/strings.hrc:90
msgctxt "STR_OBJECT_ERROR_BARS_X"
msgid "X Error Bars"
msgstr "X 误差线"

#. BUEbq
#: chart2/inc/strings.hrc:91
msgctxt "STR_OBJECT_ERROR_BARS_Y"
msgid "Y Error Bars"
msgstr "Y 误差线"

#. tQCpv
#: chart2/inc/strings.hrc:92
msgctxt "STR_OBJECT_ERROR_BARS_Z"
msgid "Z Error Bars"
msgstr "Z 误差线"

#. bz4Dw
#: chart2/inc/strings.hrc:93
msgctxt "STR_OBJECT_STOCK_LOSS"
msgid "Stock Loss"
msgstr "股票损失"

#. AFE2t
#: chart2/inc/strings.hrc:94
msgctxt "STR_OBJECT_STOCK_GAIN"
msgid "Stock Gain"
msgstr "股票收益"

#. Y5Qif
#: chart2/inc/strings.hrc:95
msgctxt "STR_OBJECT_PAGE"
msgid "Chart Area"
msgstr "图表区域"

#. J9m2k
#: chart2/inc/strings.hrc:96
msgctxt "STR_OBJECT_DIAGRAM"
msgid "Chart"
msgstr "图表"

#. oRCev
#: chart2/inc/strings.hrc:97
msgctxt "STR_OBJECT_DIAGRAM_WALL"
msgid "Chart Wall"
msgstr "图表背景墙"

#. meV4E
#: chart2/inc/strings.hrc:98
msgctxt "STR_OBJECT_DIAGRAM_FLOOR"
msgid "Chart Floor"
msgstr "图表基底"

#. AHV4D
#: chart2/inc/strings.hrc:99
msgctxt "STR_OBJECT_SHAPE"
msgid "Drawing Object"
msgstr "绘图对象"

#. dNCXG
#: chart2/inc/strings.hrc:100
msgctxt "STR_TIP_DATASERIES"
msgid "Data Series '%SERIESNAME'"
msgstr "数据序列「%SERIESNAME」"

#. LDsiQ
#: chart2/inc/strings.hrc:101
msgctxt "STR_TIP_DATAPOINT_INDEX"
msgid "Data Point %POINTNUMBER"
msgstr "数据点 %POINTNUMBER"

#. 6C6HT
#: chart2/inc/strings.hrc:102
msgctxt "STR_TIP_DATAPOINT_VALUES"
msgid "Values: %POINTVALUES"
msgstr "值: %POINTVALUES"

#. rCVeF
#: chart2/inc/strings.hrc:103
msgctxt "STR_TIP_DATAPOINT"
msgid "Data Point %POINTNUMBER, data series %SERIESNUMBER, values: %POINTVALUES"
msgstr "数据点 %POINTNUMBER，数据序列 %SERIESNUMBER，值: %POINTVALUES"

#. eKDAq
#: chart2/inc/strings.hrc:104
msgctxt "STR_STATUS_DATAPOINT_MARKED"
msgid "Data point %POINTNUMBER in data series %SERIESNUMBER selected, values: %POINTVALUES"
msgstr "已选中数据点 %POINTNUMBER，位于数据序列 %SERIESNUMBER，其值为: %POINTVALUES"

#. iKkhv
#: chart2/inc/strings.hrc:105
msgctxt "STR_STATUS_OBJECT_MARKED"
msgid "%OBJECTNAME selected"
msgstr "选中的 %OBJECTNAME"

#. vyJED
#: chart2/inc/strings.hrc:106
msgctxt "STR_STATUS_PIE_SEGMENT_EXPLODED"
msgid "Pie exploded by %PERCENTVALUE percent"
msgstr "按照 %PERCENTVALUE 百分比分解的饼状图"

#. FbGFr
#: chart2/inc/strings.hrc:107
msgctxt "STR_OBJECT_FOR_SERIES"
msgid "%OBJECTNAME for Data Series '%SERIESNAME'"
msgstr "数据序列 '%SERIESNAME' 的 %OBJECTNAME"

#. VVB54
#: chart2/inc/strings.hrc:108
msgctxt "STR_OBJECT_FOR_ALL_SERIES"
msgid "%OBJECTNAME for all Data Series"
msgstr "所有数据序列的 %OBJECTNAME"

#. Ahjrv
#: chart2/inc/strings.hrc:109
msgctxt "STR_ACTION_EDIT_CHARTTYPE"
msgid "Edit chart type"
msgstr "编辑图表类型"

#. zSLvA
#: chart2/inc/strings.hrc:110
msgctxt "STR_ACTION_EDIT_DATA_RANGES"
msgid "Edit data ranges"
msgstr "编辑数据区域"

#. RmtWN
#: chart2/inc/strings.hrc:111
msgctxt "STR_ACTION_EDIT_3D_VIEW"
msgid "Edit 3D view"
msgstr "编辑 3D 视图"

#. REBbR
#: chart2/inc/strings.hrc:112
msgctxt "STR_ACTION_EDIT_CHART_DATA"
msgid "Edit chart data"
msgstr "编辑图表数据"

#. Y7hDD
#: chart2/inc/strings.hrc:113
msgctxt "STR_ACTION_TOGGLE_LEGEND"
msgid "Legend on/off"
msgstr "图例打开/关闭"

#. fnfBr
#: chart2/inc/strings.hrc:114
msgctxt "STR_ACTION_TOGGLE_GRID_HORZ"
msgid "Horizontal grid major/major&minor/off"
msgstr "水平主网格/主次网格/关闭"

#. jZDDr
#: chart2/inc/strings.hrc:115
msgctxt "STR_ACTION_TOGGLE_GRID_VERTICAL"
msgid "Vertical grid major/major&minor/off"
msgstr "垂直主网格/主次网格/关闭"

#. bZzzZ
#: chart2/inc/strings.hrc:116
msgctxt "STR_ACTION_SCALE_TEXT"
msgid "Scale Text"
msgstr "缩放文字"

#. wJ7wY
#: chart2/inc/strings.hrc:117
msgctxt "STR_ACTION_REARRANGE_CHART"
msgid "Automatic Layout"
msgstr "自动版式"

#. j4xMg
#: chart2/inc/strings.hrc:118
msgctxt "STR_ACTION_NOTPOSSIBLE"
msgid "This function cannot be completed with the selected objects."
msgstr "无法完成选中的对象的功能。"

#. GaEzn
#: chart2/inc/strings.hrc:119
msgctxt "STR_ACTION_EDIT_TEXT"
msgid "Edit text"
msgstr "编辑文字"

#. EVDVA
#: chart2/inc/strings.hrc:120
msgctxt "STR_COLUMN_LABEL"
msgid "Column %COLUMNNUMBER"
msgstr "%COLUMNNUMBER 列"

#. dmCD9
#: chart2/inc/strings.hrc:121
msgctxt "STR_ROW_LABEL"
msgid "Row %ROWNUMBER"
msgstr "%ROWNUMBER 行"

#. fVS6E
#: chart2/inc/strings.hrc:122
msgctxt "STR_DATA_ROLE_LABEL"
msgid "Name"
msgstr "名称"

#. ozAB8
#: chart2/inc/strings.hrc:123
msgctxt "STR_DATA_ROLE_X"
msgid "X-Values"
msgstr "X 值"

#. FgGiW
#: chart2/inc/strings.hrc:124
msgctxt "STR_DATA_ROLE_Y"
msgid "Y-Values"
msgstr "Y 值"

#. vzYAg
#: chart2/inc/strings.hrc:125
msgctxt "STR_DATA_ROLE_SIZE"
msgid "Bubble Sizes"
msgstr "气泡尺寸"

#. pMGL4
#: chart2/inc/strings.hrc:126
msgctxt "STR_DATA_ROLE_X_ERROR"
msgid "X-Error-Bars"
msgstr "X 误差线"

#. c9oCh
#: chart2/inc/strings.hrc:127
msgctxt "STR_DATA_ROLE_X_ERROR_POSITIVE"
msgid "Positive X-Error-Bars"
msgstr "正 X 误差线"

#. uTsVM
#: chart2/inc/strings.hrc:128
msgctxt "STR_DATA_ROLE_X_ERROR_NEGATIVE"
msgid "Negative X-Error-Bars"
msgstr "负 X 误差线"

#. RZaBP
#: chart2/inc/strings.hrc:129
msgctxt "STR_DATA_ROLE_Y_ERROR"
msgid "Y-Error-Bars"
msgstr "Y 误差线"

#. ZFFKK
#: chart2/inc/strings.hrc:130
msgctxt "STR_DATA_ROLE_Y_ERROR_POSITIVE"
msgid "Positive Y-Error-Bars"
msgstr "正 Y 误差线"

#. pZ3af
#: chart2/inc/strings.hrc:131
msgctxt "STR_DATA_ROLE_Y_ERROR_NEGATIVE"
msgid "Negative Y-Error-Bars"
msgstr "负 Y 误差线"

#. SD2nd
#: chart2/inc/strings.hrc:132
msgctxt "STR_DATA_ROLE_FIRST"
msgid "Open Values"
msgstr "开盘价"

#. fySNC
#: chart2/inc/strings.hrc:133
msgctxt "STR_DATA_ROLE_LAST"
msgid "Close Values"
msgstr "收盘价"

#. j5tve
#: chart2/inc/strings.hrc:134
msgctxt "STR_DATA_ROLE_MIN"
msgid "Low Values"
msgstr "最低价"

#. kr9Ta
#: chart2/inc/strings.hrc:135
msgctxt "STR_DATA_ROLE_MAX"
msgid "High Values"
msgstr "最高价"

#. bK6ee
#: chart2/inc/strings.hrc:136
msgctxt "STR_DATA_ROLE_CATEGORIES"
msgid "Categories"
msgstr "类别"

#. yL7QE
#: chart2/inc/strings.hrc:137
msgctxt "STR_DATA_UNNAMED_SERIES"
msgid "Series"
msgstr "序列"

#. EgbkL
#: chart2/inc/strings.hrc:138
msgctxt "STR_DATA_UNNAMED_SERIES_WITH_INDEX"
msgid "Series%NUMBER"
msgstr "序列 %NUMBER"

#. E2YZH
#: chart2/inc/strings.hrc:139
msgctxt "STR_DATA_SELECT_RANGE_FOR_SERIES"
msgid "Select Range for %VALUETYPE of %SERIESNAME"
msgstr "为 %SERIESNAME 的 %VALUETYPE 选择区域"

#. pBSSc
#: chart2/inc/strings.hrc:140
msgctxt "STR_DATA_SELECT_RANGE_FOR_CATEGORIES"
msgid "Select Range for Categories"
msgstr "选择类别的区域"

#. brKa4
#: chart2/inc/strings.hrc:141
msgctxt "STR_DATA_SELECT_RANGE_FOR_DATALABELS"
msgid "Select Range for data labels"
msgstr "选择数据标签的区域"

#. EDFdH
#: chart2/inc/strings.hrc:142
msgctxt "STR_DATA_EDITOR_INCORRECT_INPUT"
msgid ""
"Your last input is incorrect.\n"
"Ignore this change and close the dialog?"
msgstr ""
"您上次的输入错误。\n"
"要忽略更改并关闭对话框吗？"

#. Vx6bG
#: chart2/inc/strings.hrc:143
msgctxt "STR_TEXT_DIRECTION_LTR"
msgid "Left-to-right"
msgstr "从左向右"

#. WoDyW
#: chart2/inc/strings.hrc:144
msgctxt "STR_TEXT_DIRECTION_RTL"
msgid "Right-to-left"
msgstr "从右向左"

#. dtE2L
#: chart2/inc/strings.hrc:145
msgctxt "STR_TEXT_DIRECTION_SUPER"
msgid "Use superordinate object settings"
msgstr "使用上一级对象的设置"

#. GtGu4
#: chart2/inc/strings.hrc:146
msgctxt "STR_PROPERTY_ROLE_FILLCOLOR"
msgid "Fill Color"
msgstr "填充颜色"

#. bzDDY
#: chart2/inc/strings.hrc:147
msgctxt "STR_PROPERTY_ROLE_BORDERCOLOR"
msgid "Border Color"
msgstr "边框颜色"

#. TuRxr
#: chart2/inc/strings.hrc:149
msgctxt "STR_CONTROLTEXT_ERROR_BARS_FROM_DATA"
msgid "From Data Table"
msgstr "从数据表格"

#. aPEDY
#: chart2/inc/strings.hrc:150
msgctxt "STR_REGRESSION_LINEAR"
msgid "Linear"
msgstr "线性"

#. nD8ay
#: chart2/inc/strings.hrc:151
msgctxt "STR_REGRESSION_LOG"
msgid "Logarithmic"
msgstr "对数"

#. CotSJ
#: chart2/inc/strings.hrc:152
msgctxt "STR_REGRESSION_EXP"
msgid "Exponential"
msgstr "幂"

#. HqBJV
#: chart2/inc/strings.hrc:153
msgctxt "STR_REGRESSION_POWER"
msgid "Power"
msgstr "指数"

#. dBiUj
#: chart2/inc/strings.hrc:154
msgctxt "STR_REGRESSION_POLYNOMIAL"
msgid "Polynomial"
msgstr "多项式"

#. FWi4g
#: chart2/inc/strings.hrc:155
msgctxt "STR_REGRESSION_MOVING_AVERAGE"
msgid "Moving average"
msgstr "移动平均"

#. psj3B
#: chart2/inc/strings.hrc:156
msgctxt "STR_REGRESSION_MEAN"
msgid "Mean"
msgstr "均值"

#. C8FVd
#: chart2/inc/strings.hrc:158
msgctxt "STR_TYPE_COLUMN"
msgid "Column"
msgstr "柱状图"

#. SWPnA
#: chart2/inc/strings.hrc:159
msgctxt "STR_TYPE_BAR"
msgid "Bar"
msgstr "条形图"

#. xUnpz
#: chart2/inc/strings.hrc:160
msgctxt "STR_TYPE_AREA"
msgid "Area"
msgstr "面积图"

#. bqxBm
#: chart2/inc/strings.hrc:161
msgctxt "STR_TYPE_PIE"
msgid "Pie"
msgstr "饼状图"

#. GGwEH
#: chart2/inc/strings.hrc:162
msgctxt "STR_PIE_EXPLODED"
msgid "Exploded Pie Chart"
msgstr "分离型饼状图"

#. gxFtf
#: chart2/inc/strings.hrc:163
msgctxt "STR_DONUT_EXPLODED"
msgid "Exploded Donut Chart"
msgstr "分离型圆环图表"

#. nsoQ2
#: chart2/inc/strings.hrc:164
msgctxt "STR_DONUT"
msgid "Donut"
msgstr "圆环图"

#. 7HjEG
#: chart2/inc/strings.hrc:165
msgctxt "STR_TYPE_LINE"
msgid "Line"
msgstr "折线图"

#. Miu8E
#: chart2/inc/strings.hrc:166
msgctxt "STR_TYPE_XY"
msgid "XY (Scatter)"
msgstr "XY (散点图)"

#. LBFRX
#: chart2/inc/strings.hrc:167
msgctxt "STR_POINTS_AND_LINES"
msgid "Points and Lines"
msgstr "点和线"

#. fjka7
#: chart2/inc/strings.hrc:168
msgctxt "STR_POINTS_ONLY"
msgid "Points Only"
msgstr "只是点"

#. Sz53v
#: chart2/inc/strings.hrc:169
msgctxt "STR_LINES_ONLY"
msgid "Lines Only"
msgstr "只是线条"

#. AAEA2
#: chart2/inc/strings.hrc:170
msgctxt "STR_LINES_3D"
msgid "3D Lines"
msgstr "3D 线条"

#. ABjEg
#: chart2/inc/strings.hrc:171
msgctxt "STR_TYPE_COMBI_COLUMN_LINE"
msgid "Column and Line"
msgstr "线柱图"

#. nVKfC
#: chart2/inc/strings.hrc:172
msgctxt "STR_LINE_COLUMN"
msgid "Columns and Lines"
msgstr "柱形和折线"

#. QkQSa
#: chart2/inc/strings.hrc:173
msgctxt "STR_LINE_STACKEDCOLUMN"
msgid "Stacked Columns and Lines"
msgstr "堆积柱形和折线"

#. HGKEx
#: chart2/inc/strings.hrc:174
msgctxt "STR_TYPE_NET"
msgid "Net"
msgstr "网状图"

#. BKUc4
#: chart2/inc/strings.hrc:175
msgctxt "STR_TYPE_STOCK"
msgid "Stock"
msgstr "股价图"

#. oG4gw
#: chart2/inc/strings.hrc:176
msgctxt "STR_STOCK_1"
msgid "Stock Chart 1"
msgstr "股价图 1"

#. pSzDo
#: chart2/inc/strings.hrc:177
msgctxt "STR_STOCK_2"
msgid "Stock Chart 2"
msgstr "股价图 2"

#. aEFDu
#: chart2/inc/strings.hrc:178
msgctxt "STR_STOCK_3"
msgid "Stock Chart 3"
msgstr "股价图 3"

#. jZqox
#: chart2/inc/strings.hrc:179
msgctxt "STR_STOCK_4"
msgid "Stock Chart 4"
msgstr "股价图 4"

#. DNBgg
#: chart2/inc/strings.hrc:180
msgctxt "STR_NORMAL"
msgid "Normal"
msgstr "一般"

#. EfGVL
#: chart2/inc/strings.hrc:181
msgctxt "STR_STACKED"
msgid "Stacked"
msgstr "重叠"

#. wqtzw
#: chart2/inc/strings.hrc:182
msgctxt "STR_PERCENT"
msgid "Percent Stacked"
msgstr "堆叠百分比"

#. 52UGB
#: chart2/inc/strings.hrc:183
msgctxt "STR_DEEP"
msgid "Deep"
msgstr "深度"

#. dxfuQ
#: chart2/inc/strings.hrc:184
msgctxt "STR_FILLED"
msgid "Filled"
msgstr "填充"

#. rC5nu
#: chart2/inc/strings.hrc:185
msgctxt "STR_TYPE_BUBBLE"
msgid "Bubble"
msgstr "气泡图"

#. N9tXx
#: chart2/inc/strings.hrc:186
msgctxt "STR_BUBBLE_1"
msgid "Bubble Chart"
msgstr "气泡图"

#. AjPsf
#: chart2/inc/strings.hrc:188
msgctxt "STR_INVALID_NUMBER"
msgid "Numbers are required. Check your input."
msgstr "必须输入数字。请检查您的输入。"

#. ofh4V
#: chart2/inc/strings.hrc:189
msgctxt "STR_STEP_GT_ZERO"
msgid "The major interval requires a positive number. Check your input."
msgstr "主间距值必须大于零。请检查您的输入。"

#. EBJjR
#: chart2/inc/strings.hrc:190
msgctxt "STR_BAD_LOGARITHM"
msgid "The logarithmic scale requires positive numbers. Check your input."
msgstr "对数刻度的值必须大于零。请检查您的输入。"

#. K8BCB
#: chart2/inc/strings.hrc:191
msgctxt "STR_MIN_GREATER_MAX"
msgid "The minimum must be lower than the maximum. Check your input."
msgstr "最小值必须小于最大值。请检查您的输入。"

#. oBR4x
#: chart2/inc/strings.hrc:192
msgctxt "STR_INVALID_INTERVALS"
msgid "The major interval needs to be greater than the minor interval. Check your input."
msgstr "主间距值必须大于次间距值。请检查您的输入。"

#. ZvDEh
#: chart2/inc/strings.hrc:193
msgctxt "STR_INVALID_TIME_UNIT"
msgid "The major and minor interval need to be greater or equal to the resolution. Check your input."
msgstr "主间距值与次间距必须大于或等于解析度。请检查您的输入。"

#. VVVyQ
#: chart2/uiconfig/ui/3dviewdialog.ui:8
msgctxt "3dviewdialog|3DViewDialog"
msgid "3D View"
msgstr "3D 视图"

#. 3aACC
#: chart2/uiconfig/ui/chardialog.ui:8
msgctxt "chardialog|CharDialog"
msgid "Character"
msgstr "字符"

#. v55EG
#: chart2/uiconfig/ui/chardialog.ui:135
msgctxt "chardialog|font"
msgid "Font"
msgstr "字体"

#. TnnrC
#: chart2/uiconfig/ui/chardialog.ui:182
msgctxt "chardialog|fonteffects"
msgid "Font Effects"
msgstr "字体效果"

#. nvprJ
#: chart2/uiconfig/ui/chardialog.ui:230
msgctxt "chardialog|position"
msgid "Position"
msgstr "位置"

#. vuzAY
#: chart2/uiconfig/ui/chartdatadialog.ui:8
msgctxt "chartdatadialog|ChartDataDialog"
msgid "Data Table"
msgstr "数据表"

#. ywdAz
#: chart2/uiconfig/ui/chartdatadialog.ui:73
msgctxt "chartdatadialog|InsertRow"
msgid "Insert Row"
msgstr "插入行"

#. 8ijLs
#: chart2/uiconfig/ui/chartdatadialog.ui:78
msgctxt "chartdatadialog|extended_tip|InsertRow"
msgid "Inserts a new row below the current row."
msgstr "在当前行下方插入一个新行。"

#. DDsFz
#: chart2/uiconfig/ui/chartdatadialog.ui:91
msgctxt "chartdatadialog|InsertColumn"
msgid "Insert Series"
msgstr "插入序列"

#. EjHBF
#: chart2/uiconfig/ui/chartdatadialog.ui:96
msgctxt "chartdatadialog|extended_tip|InsertColumn"
msgid "Inserts a new data series after the current column."
msgstr "在当前列之后插入一个新的数据序列。"

#. KuFy7
#: chart2/uiconfig/ui/chartdatadialog.ui:109
msgctxt "chartdatadialog|InsertTextColumn"
msgid "Insert Text Column"
msgstr "插入文本列"

#. tVACy
#: chart2/uiconfig/ui/chartdatadialog.ui:114
msgctxt "chartdatadialog|extended_tip|InsertTextColumn"
msgid "Inserts a new text column after the current column for hierarchical axes descriptions."
msgstr "在当前列之后为不同级别数轴插入一个新的文字列。"

#. 4JgTE
#: chart2/uiconfig/ui/chartdatadialog.ui:127
msgctxt "chartdatadialog|RemoveRow"
msgid "Delete Row"
msgstr "删除行"

#. DVMcX
#: chart2/uiconfig/ui/chartdatadialog.ui:132
msgctxt "chartdatadialog|extended_tip|RemoveRow"
msgid "Deletes the current row. It is not possible to delete the label row."
msgstr "删除当前行。不能删除标题行。"

#. JCBmW
#: chart2/uiconfig/ui/chartdatadialog.ui:145
msgctxt "chartdatadialog|RemoveColumn"
msgid "Delete Series"
msgstr "删除行"

#. mSCiJ
#: chart2/uiconfig/ui/chartdatadialog.ui:150
msgctxt "chartdatadialog|extended_tip|RemoveColumn"
msgid "Deletes the current series or text column. It is not possible to delete the first text column."
msgstr "删除当前序列或文字列。无法删除第一个文字列。"

#. MUkk3
#: chart2/uiconfig/ui/chartdatadialog.ui:173
msgctxt "chartdatadialog|MoveLeftColumn"
msgid "Move Series Left"
msgstr "向左移动序列"

#. V7UUB
#: chart2/uiconfig/ui/chartdatadialog.ui:178
msgctxt "chartdatadialog|extended_tip|MoveLeftColumn"
msgid "Switches the current column with its neighbor at the left."
msgstr "将当前列与其左边相邻的列进行交换。"

#. DfxQy
#: chart2/uiconfig/ui/chartdatadialog.ui:191
msgctxt "chartdatadialog|MoveRightColumn"
msgid "Move Series Right"
msgstr "向右移动序列"

#. JxZC8
#: chart2/uiconfig/ui/chartdatadialog.ui:196
msgctxt "chartdatadialog|extended_tip|MoveRightColumn"
msgid "Switches the current column with its neighbor at the right."
msgstr "将当前列与其右边相邻的列进行交换。"

#. EkxKw
#: chart2/uiconfig/ui/chartdatadialog.ui:209
msgctxt "chartdatadialog|MoveUpRow"
msgid "Move Row Up"
msgstr "向上移动行"

#. DnZTt
#: chart2/uiconfig/ui/chartdatadialog.ui:214
msgctxt "chartdatadialog|extended_tip|MoveUpRow"
msgid "Switches the current row with its neighbor above."
msgstr "将当前行与其上边相邻的行进行交换。"

#. TvbuK
#: chart2/uiconfig/ui/chartdatadialog.ui:227
msgctxt "chartdatadialog|MoveDownRow"
msgid "Move Row Down"
msgstr "向下移动行"

#. u8jmj
#: chart2/uiconfig/ui/chartdatadialog.ui:232
msgctxt "chartdatadialog|extended_tip|MoveDownRow"
msgid "Switches the current row with its neighbor below."
msgstr "将当前行与其下边相邻的行进行交换。"

#. rRJDK
#: chart2/uiconfig/ui/chartdatadialog.ui:366
msgctxt "chartdatadialog|extended_tip|ChartDataDialog"
msgid "Opens the Data Table dialog where you can edit the chart data."
msgstr "打开数据表格对话框，您可在其中编辑图表数据。"

#. KbkRw
#: chart2/uiconfig/ui/charttypedialog.ui:8
msgctxt "charttypedialog|ChartTypeDialog"
msgid "Chart Type"
msgstr "图表类型"

#. 9AVY7
#: chart2/uiconfig/ui/datarangedialog.ui:8
msgctxt "datarangedialog|DataRangeDialog"
msgid "Data Ranges"
msgstr "数据区域"

#. PqEvS
#: chart2/uiconfig/ui/datarangedialog.ui:125
msgctxt "datarangedialog|range"
msgid "Data Range"
msgstr "数据区域"

#. YmqFB
#: chart2/uiconfig/ui/datarangedialog.ui:172
msgctxt "datarangedialog|series"
msgid "Data Series"
msgstr "数据序列"

#. H6ezZ
#: chart2/uiconfig/ui/dlg_DataLabel.ui:13
msgctxt "dlg_DataLabel|dlg_DataLabels"
msgid "Data Labels for all Data Series"
msgstr "所有数据序列的标签"

#. ouq6P
#: chart2/uiconfig/ui/dlg_DataLabel.ui:101
msgctxt "dlg_DataLabel|CB_VALUE_AS_NUMBER"
msgid "Show value as _number"
msgstr "以数字格式显示值(_N)"

#. sDLeD
#: chart2/uiconfig/ui/dlg_DataLabel.ui:109
msgctxt "dlg_DataLabel|extended_tip|CB_VALUE_AS_NUMBER"
msgid "Displays the absolute values of the data points."
msgstr "显示数据点的绝对值。"

#. C2XXx
#: chart2/uiconfig/ui/dlg_DataLabel.ui:120
msgctxt "dlg_DataLabel|CB_VALUE_AS_PERCENTAGE"
msgid "Show value as _percentage"
msgstr "以百分比格式显示值(_P)"

#. 5Hp8E
#: chart2/uiconfig/ui/dlg_DataLabel.ui:128
msgctxt "dlg_DataLabel|extended_tip|CB_VALUE_AS_PERCENTAGE"
msgid "Displays the percentage of the data points in each column."
msgstr "显示各列中数据点的百分比。"

#. MYzUe
#: chart2/uiconfig/ui/dlg_DataLabel.ui:139
msgctxt "dlg_DataLabel|CB_CATEGORY"
msgid "Show _category"
msgstr "显示类别(_C)"

#. oJGQF
#: chart2/uiconfig/ui/dlg_DataLabel.ui:147
msgctxt "dlg_DataLabel|extended_tip|CB_CATEGORY"
msgid "Shows the data point text labels."
msgstr "显示数据点文字标签。"

#. 8mMDV
#: chart2/uiconfig/ui/dlg_DataLabel.ui:158
msgctxt "dlg_DataLabel|CB_SYMBOL"
msgid "Show _legend key"
msgstr "显示图例(_L)"

#. 7WADc
#: chart2/uiconfig/ui/dlg_DataLabel.ui:166
msgctxt "dlg_DataLabel|extended_tip|CB_SYMBOL"
msgid "Displays the legend icons next to each data point label."
msgstr "在各数据点标签旁边显示图例图标。"

#. BA3kD
#: chart2/uiconfig/ui/dlg_DataLabel.ui:177
msgctxt "dlg_DataLabel|CB_WRAP_TEXT"
msgid "Auto text _wrap"
msgstr "文本自动换行(_W)"

#. bFd8g
#: chart2/uiconfig/ui/dlg_DataLabel.ui:191
msgctxt "dlg_DataLabel|PB_NUMBERFORMAT"
msgid "Number _format..."
msgstr "数字格式(_F)..."

#. yHa5z
#: chart2/uiconfig/ui/dlg_DataLabel.ui:199
msgctxt "dlg_DataLabel|extended_tip|PB_NUMBERFORMAT"
msgid "Opens a dialog to select the number format."
msgstr "打开对话框以选择数字格式。"

#. cFD6D
#: chart2/uiconfig/ui/dlg_DataLabel.ui:210
msgctxt "dlg_DataLabel|PB_PERCENT_NUMBERFORMAT"
msgid "Percentage f_ormat..."
msgstr "百分比格式(_O)..."

#. Wj42y
#: chart2/uiconfig/ui/dlg_DataLabel.ui:218
msgctxt "dlg_DataLabel|extended_tip|PB_PERCENT_NUMBERFORMAT"
msgid "Opens a dialog to select the percentage format."
msgstr "打开对话框以选择百分比格式。"

#. ETbFx
#: chart2/uiconfig/ui/dlg_DataLabel.ui:231
msgctxt "dlg_DataLabel|CT_LABEL_DIAL"
msgid "ABCD"
msgstr "ABCD"

#. NvbuM
#: chart2/uiconfig/ui/dlg_DataLabel.ui:250
msgctxt "dlg_DataLabel|FT_TEXT_SEPARATOR"
msgid "_Separator"
msgstr "分隔符(_S)"

#. m8qsr
#: chart2/uiconfig/ui/dlg_DataLabel.ui:267
msgctxt "dlg_DataLabel|liststoreSEPARATOR"
msgid "Space"
msgstr "空格"

#. d6M3S
#: chart2/uiconfig/ui/dlg_DataLabel.ui:268
msgctxt "dlg_DataLabel|liststoreSEPARATOR"
msgid "Comma"
msgstr "逗号"

#. HUBkD
#: chart2/uiconfig/ui/dlg_DataLabel.ui:269
msgctxt "dlg_DataLabel|liststoreSEPARATOR"
msgid "Semicolon"
msgstr "分号"

#. 3CaCX
#: chart2/uiconfig/ui/dlg_DataLabel.ui:270
msgctxt "dlg_DataLabel|liststoreSEPARATOR"
msgid "New line"
msgstr "新行"

#. CAtwB
#: chart2/uiconfig/ui/dlg_DataLabel.ui:271
msgctxt "dlg_DataLabel|liststoreSEPARATOR"
msgid "Period"
msgstr "逗号"

#. 8Z3DJ
#: chart2/uiconfig/ui/dlg_DataLabel.ui:275
msgctxt "dlg_DataLabel|extended_tip|LB_TEXT_SEPARATOR"
msgid "Selects the separator between multiple text strings for the same object."
msgstr "在多文本字符串之间为相同的对象选择分隔符。"

#. FDBQW
#: chart2/uiconfig/ui/dlg_DataLabel.ui:301
msgctxt "dlg_DataLabel|FT_LABEL_PLACEMENT"
msgid "Place_ment"
msgstr "位置(_M)"

#. RBvRC
#: chart2/uiconfig/ui/dlg_DataLabel.ui:318
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Best fit"
msgstr "最佳适应"

#. CFGTS
#: chart2/uiconfig/ui/dlg_DataLabel.ui:319
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Center"
msgstr "居中"

#. kxNDG
#: chart2/uiconfig/ui/dlg_DataLabel.ui:320
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Above"
msgstr "上"

#. dnhiD
#: chart2/uiconfig/ui/dlg_DataLabel.ui:321
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Top left"
msgstr "左上"

#. TGuEk
#: chart2/uiconfig/ui/dlg_DataLabel.ui:322
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Left"
msgstr "左"

#. eUxTR
#: chart2/uiconfig/ui/dlg_DataLabel.ui:323
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Bottom left"
msgstr "左下"

#. CGQj7
#: chart2/uiconfig/ui/dlg_DataLabel.ui:324
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Below"
msgstr "下"

#. UJ7uQ
#: chart2/uiconfig/ui/dlg_DataLabel.ui:325
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Bottom right"
msgstr "右下"

#. nEFuG
#: chart2/uiconfig/ui/dlg_DataLabel.ui:326
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Right"
msgstr "右"

#. NQCGE
#: chart2/uiconfig/ui/dlg_DataLabel.ui:327
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Top right"
msgstr "右上"

#. UagUt
#: chart2/uiconfig/ui/dlg_DataLabel.ui:328
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Inside"
msgstr "内侧"

#. y25DL
#: chart2/uiconfig/ui/dlg_DataLabel.ui:329
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Outside"
msgstr "外侧"

#. 3HjyB
#: chart2/uiconfig/ui/dlg_DataLabel.ui:330
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Near origin"
msgstr "原点附近"

#. TMEug
#: chart2/uiconfig/ui/dlg_DataLabel.ui:334
msgctxt "dlg_DataLabel|extended_tip|LB_LABEL_PLACEMENT"
msgid "Selects the placement of data labels relative to the objects."
msgstr "选择与对象相关的数据标签的位置。"

#. 69qZL
#: chart2/uiconfig/ui/dlg_DataLabel.ui:354
msgctxt "dlg_DataLabel|STR_DLG_NUMBERFORMAT_FOR_PERCENTAGE_VALUE"
msgid "Number Format for Percentage Value"
msgstr "百分比值的数字格式"

#. AUAf8
#: chart2/uiconfig/ui/dlg_DataLabel.ui:363
msgctxt "dlg_DataLabel|CB_DATA_SERIES_NAME"
msgid "Show data _series name"
msgstr ""

#. 8bEui
#: chart2/uiconfig/ui/dlg_DataLabel.ui:372
msgctxt "dlg_DataLabel|extended_tip|CB_DATA_SERIES_NAME"
msgid "Shows the data series name in the label."
msgstr ""

#. mFeMA
#: chart2/uiconfig/ui/dlg_DataLabel.ui:393
msgctxt "dlg_DataLabel|label1"
msgid "Text Attributes"
msgstr "文本属性"

#. gE7CA
#: chart2/uiconfig/ui/dlg_DataLabel.ui:433
msgctxt "dlg_DataLabel|extended_tip|CT_DIAL"
msgid "Click in the dial to set the text orientation for the data labels."
msgstr "点击圆盘设置数据标签的文字方向。"

#. MjCoG
#: chart2/uiconfig/ui/dlg_DataLabel.ui:454
msgctxt "dlg_DataLabel|extended_tip|NF_LABEL_DEGREES"
msgid "Enter the counterclockwise rotation angle for the data labels."
msgstr "输入数据标签逆时针旋转的角度。"

#. Jhjwb
#: chart2/uiconfig/ui/dlg_DataLabel.ui:468
msgctxt "dlg_DataLabel|FT_LABEL_DEGREES"
msgid "_Degrees"
msgstr "度(_D)"

#. vtVy2
#: chart2/uiconfig/ui/dlg_DataLabel.ui:493
msgctxt "dlg_DataLabel|FT_LABEL_TEXTDIR"
msgid "Te_xt direction"
msgstr "文字方向(_X)"

#. tjcHp
#: chart2/uiconfig/ui/dlg_DataLabel.ui:510
msgctxt "dlg_DataLabel|extended_tip|LB_LABEL_TEXTDIR"
msgid "Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled."
msgstr "为使用复杂文字版式 (CTL) 的段落指定文字方向。只有启用了复杂文字版式时，此功能才可用。"

#. xpAEz
#: chart2/uiconfig/ui/dlg_DataLabel.ui:533
msgctxt "dlg_DataLabel|label2"
msgid "Rotate Text"
msgstr "文字旋转"

#. NpD8D
#: chart2/uiconfig/ui/dlg_DataLabel.ui:562
msgctxt "dlg_DataLabel|CB_CUSTOM_LEADER_LINES"
msgid "_Connect displaced data labels to data points"
msgstr "将位移了的数据标签与对应数据点连接(_C)"

#. MJdmK
#: chart2/uiconfig/ui/dlg_DataLabel.ui:570
msgctxt "dlg_DataLabel|extended_tip|CB_CUSTOM_LEADER_LINES"
msgid "Draws a line connecting the data labels to the data points"
msgstr "在数据标签与对应数据点间画一条连接线"

#. UKVF9
#: chart2/uiconfig/ui/dlg_DataLabel.ui:586
msgctxt "dlg_DataLabel|label3"
msgid "Leader Lines"
msgstr "标注线"

#. 6bBph
#: chart2/uiconfig/ui/dlg_DataLabel.ui:602
msgctxt "dlg_DataLabel|extended_tip|tp_DataLabel"
msgid "Opens the Data Labels dialog, which enables you to set the data labels."
msgstr "打开「数据标签」对话框，您可以在其中设置数据标签。"

#. bt7D7
#: chart2/uiconfig/ui/dlg_DataLabel.ui:624
msgctxt "dlg_DataLabel|extended_tip|dlg_DataLabels"
msgid "Opens the Data Labels dialog, which enables you to set the data labels."
msgstr "打开「数据标签」对话框，您可以在其中设置数据标签。"

#. 3GUtp
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:28
msgctxt "dlg_InsertErrorBars|dlg_InsertErrorBars"
msgid "Legend"
msgstr "图例"

#. 9Wf9T
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:124
msgctxt "dlg_InsertErrorBars|RB_NONE"
msgid "_None"
msgstr "无(_N)"

#. pvfsb
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:132
msgctxt "dlg_InsertErrorBars|extended_tip|RB_NONE"
msgid "Does not show any error bars."
msgstr "不会显示任何错误栏。"

#. sMZoy
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:144
msgctxt "dlg_InsertErrorBars|RB_CONST"
msgid "_Constant Value"
msgstr "常数(_C)"

#. oDzF5
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:153
msgctxt "dlg_InsertErrorBars|extended_tip|RB_CONST"
msgid "Displays constant values that you specify in the Parameters area."
msgstr "显示您在「参数」区域中指定的常数值。"

#. UzxQQ
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:165
msgctxt "dlg_InsertErrorBars|RB_PERCENT"
msgid "_Percentage"
msgstr "百分比(_P)"

#. bGDm2
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:174
msgctxt "dlg_InsertErrorBars|extended_tip|RB_PERCENT"
msgid "Displays a percentage. The display refers to the corresponding data point. Set the percentage in the Parameters area."
msgstr "显示一个百分比。显示的内容对应于相应的数据点。在「参数」区域中设置百分比。"

#. tSBH9
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:199
msgctxt "dlg_InsertErrorBars|extended_tip|RB_FUNCTION"
msgid "Select a function to calculate the error bars."
msgstr "选择用于计算误差线的函数。"

#. fkUNn
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:214
msgctxt "dlg_InsertErrorBars|liststoreFUNCTION"
msgid "Standard Error"
msgstr "标准误差"

#. zpc6d
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:215
msgctxt "dlg_InsertErrorBars|liststoreFUNCTION"
msgid "Standard Deviation"
msgstr "标准偏差"

#. wA6LE
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:216
msgctxt "dlg_InsertErrorBars|liststoreFUNCTION"
msgid "Variance"
msgstr "方差"

#. UASm3
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:217
msgctxt "dlg_InsertErrorBars|liststoreFUNCTION"
msgid "Error Margin"
msgstr "误差范围"

#. vqTAT
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:221
msgctxt "dlg_InsertErrorBars|extended_tip|LB_FUNCTION"
msgid "Select a function to calculate the error bars."
msgstr "选择用于计算误差线的函数。"

#. Z5yGF
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:240
msgctxt "dlg_InsertErrorBars|RB_RANGE"
msgid "Cell _Range"
msgstr "单元格区域(_R)"

#. Vm5iS
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:249
msgctxt "dlg_InsertErrorBars|extended_tip|RB_RANGE"
msgid "Click Cell Range and then specify a cell range from which to take the positive and negative error bar values."
msgstr "点击「单元格区域」，之后指定一个从中获得正、负误差线值的单元格区域。"

#. vdvVR
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:265
msgctxt "dlg_InsertErrorBars|label1"
msgid "Error Category"
msgstr "误差分类"

#. oZaa3
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:295
msgctxt "dlg_InsertErrorBars|RB_BOTH"
msgid "Positive _and Negative"
msgstr "正值和负值(_A)"

#. aAhky
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:303
msgctxt "dlg_InsertErrorBars|extended_tip|RB_BOTH"
msgid "Shows positive and negative error bars."
msgstr "显示正、负误差线。"

#. jJw8Y
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:314
msgctxt "dlg_InsertErrorBars|RB_POSITIVE"
msgid "Pos_itive"
msgstr "正值(_I)"

#. yXXuP
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:323
msgctxt "dlg_InsertErrorBars|extended_tip|RB_POSITIVE"
msgid "Shows only positive error bars."
msgstr "只显示正误差线。"

#. 6YgbM
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:334
msgctxt "dlg_InsertErrorBars|RB_NEGATIVE"
msgid "Ne_gative"
msgstr "负值(_G)"

#. KsYHq
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:343
msgctxt "dlg_InsertErrorBars|extended_tip|RB_NEGATIVE"
msgid "Shows only negative error bars."
msgstr "只显示负误差线。"

#. fkKQH
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:391
msgctxt "dlg_InsertErrorBars|label2"
msgid "Error Indicator"
msgstr "误差指示器"

#. WWuZ8
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:435
msgctxt "dlg_InsertErrorBars|FT_POSITIVE"
msgid "P_ositive (+)"
msgstr "正值(+) (_O)"

#. EHq4d
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:454
msgctxt "dlg_InsertErrorBars|extended_tip|MF_POSITIVE"
msgid "Enter the value to add to the displayed value as the positive error value."
msgstr "输入要增加到显示值作为正误差值的数值。"

#. SUBEs
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:473
msgctxt "dlg_InsertErrorBars|extended_tip|ED_RANGE_POSITIVE"
msgid "Enter the address range from where to get the positive error values. Use the Shrink button to select the range from a sheet."
msgstr "输入地址范围，从该地址范围可以得到正误差值。使用「缩小」按钮从工作表中选择范围。"

#. 5FfdH
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:488
msgctxt "dlg_InsertErrorBars|IB_RANGE_POSITIVE|tooltip_text"
msgid "Select data range"
msgstr "选择数据区域"

#. JYk3c
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:492
msgctxt "dlg_InsertErrorBars|extended_tip|IB_RANGE_POSITIVE"
msgid "Click a button to shrink the dialog, then use the mouse to select the cell range in the spreadsheet. Click the button again to restore the dialog to full size."
msgstr "点击按钮缩小对话框，然后在电子表格中使用鼠标选择单元格区域。再次点击该按钮以将对话框还原至完整大小。"

#. K9wAk
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:518
msgctxt "dlg_InsertErrorBars|FT_NEGATIVE"
msgid "_Negative (-)"
msgstr "负值(-) (_N)"

#. Hzr6X
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:537
msgctxt "dlg_InsertErrorBars|extended_tip|MF_NEGATIVE"
msgid "Enter the value to subtract from the displayed value as the negative error value."
msgstr "输入要从显示值中减去的作为负误差值的数值。"

#. DTR5D
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:556
msgctxt "dlg_InsertErrorBars|extended_tip|ED_RANGE_NEGATIVE"
msgid "Enter the address range from where to get the negative error values. Use the Shrink button to select the range from a sheet."
msgstr "输入地址范围，从该地址范围可以得到负误差值。使用「缩小」按钮从工作表中选择范围。"

#. jsckc
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:571
msgctxt "dlg_InsertErrorBars|IB_RANGE_NEGATIVE|tooltip_text"
msgid "Select data range"
msgstr "选择数据区域"

#. mEwUr
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:575
msgctxt "dlg_InsertErrorBars|extended_tip|IB_RANGE_NEGATIVE"
msgid "Click a button to shrink the dialog, then use the mouse to select the cell range in the spreadsheet. Click the button again to restore the dialog to full size."
msgstr "点击按钮缩小对话框，然后在电子表格中使用鼠标选择单元格区域。再次点击该按钮以将对话框还原至完整大小。"

#. GZS6d
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:594
msgctxt "dlg_InsertErrorBars|CB_SYN_POS_NEG"
msgid "Same value for both"
msgstr "两个值相同"

#. wTppD
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:602
msgctxt "dlg_InsertErrorBars|extended_tip|CB_SYN_POS_NEG"
msgid "Enable to use the positive error values also as negative error values. You can only change the value of the \"Positive (+)\" box. That value gets copied to the \"Negative (-)\" box automatically."
msgstr "允许将正误差值同时作为负误差值。您只能更改「正值 (+)」框的值。该值会被自动复制到「负值 (-)」框。"

#. ogVMg
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:618
msgctxt "dlg_InsertErrorBars|label3"
msgid "Parameters"
msgstr "参数"

#. MXxxE
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:635
msgctxt "dlg_InsertErrorBars|STR_DATA_SELECT_RANGE_FOR_POSITIVE_ERRORBARS"
msgid "Select Range for Positive Error Bars"
msgstr "为正误差线选择区域"

#. ixAQm
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:646
msgctxt "dlg_InsertErrorBars|STR_DATA_SELECT_RANGE_FOR_NEGATIVE_ERRORBARS"
msgid "Select Range for Negative Error Bars"
msgstr "为负误差线选择区域"

#. 68LFy
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:657
msgctxt "dlg_InsertErrorBars|STR_CONTROLTEXT_ERROR_BARS_FROM_DATA"
msgid "From Data Table"
msgstr "从数据表"

#. 3G3Jo
#: chart2/uiconfig/ui/dlg_InsertLegend.ui:8
msgctxt "dlg_InsertLegend|dlg_InsertLegend"
msgid "Legend"
msgstr "图例"

#. TQUNp
#: chart2/uiconfig/ui/dlg_InsertLegend.ui:102
msgctxt "dlg_InsertLegend|show"
msgid "_Display legend"
msgstr "显示图例(_D)"

#. BbrEG
#: chart2/uiconfig/ui/dlg_InsertLegend.ui:124
msgctxt "dlg_InsertLegend|left"
msgid "_Left"
msgstr "左(_L)"

#. EdZ7j
#: chart2/uiconfig/ui/dlg_InsertLegend.ui:139
msgctxt "dlg_InsertLegend|right"
msgid "_Right"
msgstr "右(_R)"

#. PoZ9R
#: chart2/uiconfig/ui/dlg_InsertLegend.ui:154
msgctxt "dlg_InsertLegend|top"
msgid "_Top"
msgstr "顶部(_T)"

#. Uvcht
#: chart2/uiconfig/ui/dlg_InsertLegend.ui:169
msgctxt "dlg_InsertLegend|bottom"
msgid "_Bottom"
msgstr "底部(_B)"

#. bxdb5
#: chart2/uiconfig/ui/dlg_InsertLegend.ui:195
msgctxt "dlg_InsertLegend|TXT_POSITION"
msgid "Position"
msgstr "位置"

#. FAEct
#: chart2/uiconfig/ui/insertaxisdlg.ui:8
msgctxt "insertaxisdlg|InsertAxisDialog"
msgid "Axes"
msgstr "轴"

#. 4Drc8
#: chart2/uiconfig/ui/insertaxisdlg.ui:102
msgctxt "insertaxisdlg|primaryX"
msgid "_X axis"
msgstr "_X轴"

#. QyAAw
#: chart2/uiconfig/ui/insertaxisdlg.ui:110
msgctxt "insertaxisdlg|extended_tip|primaryX"
msgid "Displays the X axis as a line with subdivisions."
msgstr "显示带有线点间隔的 X 轴。"

#. XeWVu
#: chart2/uiconfig/ui/insertaxisdlg.ui:122
msgctxt "insertaxisdlg|primaryY"
msgid "_Y axis"
msgstr "_Y轴"

#. 8ZzUp
#: chart2/uiconfig/ui/insertaxisdlg.ui:130
msgctxt "insertaxisdlg|extended_tip|primaryY"
msgid "Displays the Y axis as a line with subdivisions."
msgstr "将 Y 轴显示为带有线点间隔的直线。"

#. FoAXW
#: chart2/uiconfig/ui/insertaxisdlg.ui:142
msgctxt "insertaxisdlg|primaryZ"
msgid "_Z axis"
msgstr "_Z轴"

#. DgjxB
#: chart2/uiconfig/ui/insertaxisdlg.ui:150
msgctxt "insertaxisdlg|extended_tip|primaryZ"
msgid "Displays the Z axis as a line with subdivisions."
msgstr "将 Z 轴显示为带有线点间隔的直线。"

#. YZ7GG
#: chart2/uiconfig/ui/insertaxisdlg.ui:167
msgctxt "insertaxisdlg|label1"
msgid "Axes"
msgstr "坐标轴"

#. WEUFf
#: chart2/uiconfig/ui/insertaxisdlg.ui:198
msgctxt "insertaxisdlg|secondaryX"
msgid "X _axis"
msgstr "X轴(_A)"

#. JGQhE
#: chart2/uiconfig/ui/insertaxisdlg.ui:206
msgctxt "insertaxisdlg|extended_tip|secondaryX"
msgid "Displays a secondary X axis in the chart."
msgstr "显示图表中的次 X 轴。"

#. 598Gk
#: chart2/uiconfig/ui/insertaxisdlg.ui:218
msgctxt "insertaxisdlg|secondaryY"
msgid "Y ax_is"
msgstr "Y轴(_I)"

#. trDFK
#: chart2/uiconfig/ui/insertaxisdlg.ui:226
msgctxt "insertaxisdlg|extended_tip|secondaryY"
msgid "The major axis and the secondary axis can have different scaling. For example, you can scale one axis to 2 in. and the other to 1.5 in. "
msgstr "主轴和次轴的显示比例可以不同。例如，可将一个轴的显示比例设置为 2 in.，将另一个轴的显示比例设置为 1.5 in.。"

#. CAFjD
#: chart2/uiconfig/ui/insertaxisdlg.ui:238
msgctxt "insertaxisdlg|secondaryZ"
msgid "Z axi_s"
msgstr "Z轴(_S)"

#. 2LQwV
#: chart2/uiconfig/ui/insertaxisdlg.ui:258
msgctxt "insertaxisdlg|label2"
msgid "Secondary Axes"
msgstr "次轴"

#. 7yEDE
#: chart2/uiconfig/ui/insertaxisdlg.ui:290
msgctxt "insertaxisdlg|extended_tip|InsertAxisDialog"
msgid "Specifies the axes to be displayed in the chart."
msgstr "指定要在图表中显示的轴。"

#. 2eGKS
#: chart2/uiconfig/ui/insertgriddlg.ui:8
msgctxt "insertgriddlg|InsertGridDialog"
msgid "Grids"
msgstr "网格线"

#. adEgJ
#: chart2/uiconfig/ui/insertgriddlg.ui:102
msgctxt "insertgriddlg|primaryX"
msgid "_X axis"
msgstr "_X轴"

#. TeVcH
#: chart2/uiconfig/ui/insertgriddlg.ui:110
msgctxt "insertgriddlg|extended_tip|primaryX"
msgid "Adds gridlines to the X axis of the chart."
msgstr "将网格线添加到图表的 X 轴。"

#. FEBZW
#: chart2/uiconfig/ui/insertgriddlg.ui:122
msgctxt "insertgriddlg|primaryY"
msgid "_Y axis"
msgstr "_Y轴"

#. 6SmKJ
#: chart2/uiconfig/ui/insertgriddlg.ui:130
msgctxt "insertgriddlg|extended_tip|primaryY"
msgid "Adds gridlines to the Y axis of the chart."
msgstr "将网格线添加到图表的 Y 轴。"

#. XEXTu
#: chart2/uiconfig/ui/insertgriddlg.ui:142
msgctxt "insertgriddlg|primaryZ"
msgid "_Z axis"
msgstr "_Z轴"

#. bF4Eb
#: chart2/uiconfig/ui/insertgriddlg.ui:150
msgctxt "insertgriddlg|extended_tip|primaryZ"
msgid "Adds gridlines to the Z axis of the chart."
msgstr "将网格线添加到图表的 Z 轴。"

#. 9QbAA
#: chart2/uiconfig/ui/insertgriddlg.ui:167
msgctxt "insertgriddlg|label1"
msgid "Major Grids"
msgstr "主网格"

#. wqXds
#: chart2/uiconfig/ui/insertgriddlg.ui:198
msgctxt "insertgriddlg|secondaryX"
msgid "X _axis"
msgstr "X轴(_A)"

#. cfAUn
#: chart2/uiconfig/ui/insertgriddlg.ui:206
msgctxt "insertgriddlg|extended_tip|secondaryX"
msgid "Adds gridlines that subdivide the X axis into smaller sections."
msgstr "将用于细分 X 轴的网格线添加到较小区段。"

#. PkzaY
#: chart2/uiconfig/ui/insertgriddlg.ui:218
msgctxt "insertgriddlg|secondaryY"
msgid "Y ax_is"
msgstr "Y轴(_I)"

#. a3asH
#: chart2/uiconfig/ui/insertgriddlg.ui:226
msgctxt "insertgriddlg|extended_tip|secondaryY"
msgid "Adds gridlines that subdivide the Y axis into smaller sections."
msgstr "将用于细分 Y 轴的网格线添加到较小区段。"

#. CcCG8
#: chart2/uiconfig/ui/insertgriddlg.ui:238
msgctxt "insertgriddlg|secondaryZ"
msgid "Z axi_s"
msgstr "Z轴(_S)"

#. hcj99
#: chart2/uiconfig/ui/insertgriddlg.ui:246
msgctxt "insertgriddlg|extended_tip|secondaryZ"
msgid "Adds gridlines that subdivide the Z axis into smaller sections."
msgstr "将用于细分 Z 轴的网格线添加到较小区段。"

#. QBQD4
#: chart2/uiconfig/ui/insertgriddlg.ui:263
msgctxt "insertgriddlg|label2"
msgid "Minor Grids"
msgstr "次网格"

#. URB9E
#: chart2/uiconfig/ui/insertgriddlg.ui:295
msgctxt "insertgriddlg|extended_tip|InsertGridDialog"
msgid "You can divide the axes into sections by assigning gridlines to them. This allows you to get a better overview of the chart, especially if you are working with large charts."
msgstr "通过为轴指定网格线可以将轴分成若干段，这使得您更方便地纵览图表，特别是当您使用较大的图表时。"

#. rqADt
#: chart2/uiconfig/ui/inserttitledlg.ui:8
msgctxt "inserttitledlg|InsertTitleDialog"
msgid "Titles"
msgstr "标题"

#. pAKf8
#: chart2/uiconfig/ui/inserttitledlg.ui:92
msgctxt "inserttitledlg|labelMainTitle"
msgid "_Title"
msgstr "标题(_T)"

#. ZBgRn
#: chart2/uiconfig/ui/inserttitledlg.ui:106
msgctxt "inserttitledlg|labelSubTitle"
msgid "_Subtitle"
msgstr "副标题(_S)"

#. aCRZ7
#: chart2/uiconfig/ui/inserttitledlg.ui:125
msgctxt "inserttitledlg|extended_tip|maintitle"
msgid "Enter the desired title for the chart."
msgstr "输入您所需要的图表标题。"

#. 5eiq7
#: chart2/uiconfig/ui/inserttitledlg.ui:143
msgctxt "inserttitledlg|extended_tip|subtitle"
msgid "Enter the desired subtitle for the chart."
msgstr "输入图表所需要的副标题。"

#. y8KiH
#: chart2/uiconfig/ui/inserttitledlg.ui:178
msgctxt "inserttitledlg|labelPrimaryXaxis"
msgid "_X axis"
msgstr "_X 轴"

#. RhsUT
#: chart2/uiconfig/ui/inserttitledlg.ui:192
msgctxt "inserttitledlg|labelPrimaryYaxis"
msgid "_Y axis"
msgstr "_Y 轴"

#. ypJFt
#: chart2/uiconfig/ui/inserttitledlg.ui:206
msgctxt "inserttitledlg|labelPrimaryZaxis"
msgid "_Z axis"
msgstr "_Z 轴"

#. qz8WP
#: chart2/uiconfig/ui/inserttitledlg.ui:225
msgctxt "inserttitledlg|extended_tip|primaryXaxis"
msgid "Enter the desired title for the X axis of the chart."
msgstr "输入图标中 X 轴的标题。"

#. 3m5Dk
#: chart2/uiconfig/ui/inserttitledlg.ui:243
msgctxt "inserttitledlg|extended_tip|primaryYaxis"
msgid "Enter the desired title for the Y axis of the chart."
msgstr "为Y轴对应的区域输入所需的标题。"

#. PY2EU
#: chart2/uiconfig/ui/inserttitledlg.ui:261
msgctxt "inserttitledlg|extended_tip|primaryZaxis"
msgid "Enter the desired title for the Z axis of the chart."
msgstr "为图表的 Z 轴输入所需的标题。"

#. aHvzY
#: chart2/uiconfig/ui/inserttitledlg.ui:276
msgctxt "inserttitledlg|Axe"
msgid "Axes"
msgstr "轴"

#. 8XRFP
#: chart2/uiconfig/ui/inserttitledlg.ui:308
msgctxt "inserttitledlg|labelSecondaryXAxis"
msgid "X _axis"
msgstr "X 轴(_A)"

#. Tq7G9
#: chart2/uiconfig/ui/inserttitledlg.ui:322
msgctxt "inserttitledlg|labelSecondaryYAxis"
msgid "Y ax_is"
msgstr "Y 轴(_I)"

#. EsHDi
#: chart2/uiconfig/ui/inserttitledlg.ui:341
msgctxt "inserttitledlg|extended_tip|secondaryXaxis"
msgid "Enter the desired secondary title for the X axis of the chart."
msgstr "输入图表X轴的副标题。"

#. bnwti
#: chart2/uiconfig/ui/inserttitledlg.ui:359
msgctxt "inserttitledlg|extended_tip|secondaryYaxis"
msgid "Enter the desired secondary title for the Y axis of the chart."
msgstr "输入图表Y轴的次标题。"

#. XvJwD
#: chart2/uiconfig/ui/inserttitledlg.ui:374
msgctxt "inserttitledlg|label2"
msgid "Secondary Axes"
msgstr "次轴"

#. Y96AE
#: chart2/uiconfig/ui/inserttitledlg.ui:406
msgctxt "inserttitledlg|extended_tip|InsertTitleDialog"
msgid "Opens a dialog to enter or modify the titles in a chart."
msgstr "打开一个对话框，用于输入或修改图表中的标题。"

#. 23FsQ
#: chart2/uiconfig/ui/paradialog.ui:8
msgctxt "paradialog|ParagraphDialog"
msgid "Paragraph"
msgstr "段落"

#. 6xRiy
#: chart2/uiconfig/ui/paradialog.ui:135
msgctxt "paradialog|labelTP_PARA_STD"
msgid "Indents & Spacing"
msgstr "缩进与间距"

#. PRo68
#: chart2/uiconfig/ui/paradialog.ui:182
msgctxt "paradialog|labelTP_PARA_ALIGN"
msgid "Alignment"
msgstr "对齐"

#. EB5A9
#: chart2/uiconfig/ui/paradialog.ui:231
msgctxt "paradialog|labelTP_PARA_ASIAN"
msgid "Asian Typography"
msgstr "亚洲文字版式"

#. BzbWJ
#: chart2/uiconfig/ui/paradialog.ui:279
msgctxt "paradialog|labelTP_TABULATOR"
msgid "Tabs"
msgstr "制表符"

#. jEDem
#: chart2/uiconfig/ui/sidebaraxis.ui:24
msgctxt "sidebaraxis|checkbutton_show_label"
msgid "Show labels"
msgstr "显示标签"

#. 52BFU
#: chart2/uiconfig/ui/sidebaraxis.ui:38
msgctxt "sidebaraxis|checkbutton_reverse"
msgid "Reverse direction"
msgstr "反转方向"

#. hABaw
#: chart2/uiconfig/ui/sidebaraxis.ui:63
msgctxt "sidebaraxis|label1"
msgid "_Label position:"
msgstr "标签位置: (_L)"

#. JpV6N
#: chart2/uiconfig/ui/sidebaraxis.ui:77
msgctxt "sidebaraxis|comboboxtext_label_position"
msgid "Near Axis"
msgstr "靠近轴"

#. HEMNB
#: chart2/uiconfig/ui/sidebaraxis.ui:78
msgctxt "sidebaraxis|comboboxtext_label_position"
msgid "Near Axis (other side)"
msgstr "靠近轴 (另一侧)"

#. BE2dT
#: chart2/uiconfig/ui/sidebaraxis.ui:79
msgctxt "sidebaraxis|comboboxtext_label_position"
msgid "Outside start"
msgstr "起始位置的外侧"

#. rH94z
#: chart2/uiconfig/ui/sidebaraxis.ui:80
msgctxt "sidebaraxis|comboboxtext_label_position"
msgid "Outside end"
msgstr "结束位置的外侧"

#. 69LSe
#: chart2/uiconfig/ui/sidebaraxis.ui:94
msgctxt "sidebaraxis|label2"
msgid "_Text orientation:"
msgstr "文字方向(_T):"

#. Bqqg6
#: chart2/uiconfig/ui/sidebarelements.ui:34
msgctxt "sidebarelements|checkbutton_title"
msgid "Title"
msgstr "大标题"

#. HttnZ
#: chart2/uiconfig/ui/sidebarelements.ui:51
msgctxt "sidebarelements|checkbutton_subtitle"
msgid "Subtitle"
msgstr "副标题"

#. vkhjB
#: chart2/uiconfig/ui/sidebarelements.ui:102
msgctxt "sidebarelements|l"
msgid "Titles"
msgstr "标题"

#. dB6pP
#: chart2/uiconfig/ui/sidebarelements.ui:131
msgctxt "sidebarelements|checkbutton_legend"
msgid "Show legend"
msgstr "显示图例"

#. XxG3r
#: chart2/uiconfig/ui/sidebarelements.ui:135
msgctxt "sidebarelements|checkbutton_legend|tooltip_text"
msgid "Show Legend"
msgstr "显示图例"

#. zszn2
#: chart2/uiconfig/ui/sidebarelements.ui:156
msgctxt "sidebarelements|placement_label"
msgid "_Placement:"
msgstr "位置: (_P)"

#. N9Vw3
#: chart2/uiconfig/ui/sidebarelements.ui:172
msgctxt "sidebarelements|comboboxtext_legend"
msgid "Right"
msgstr "右侧"

#. XWGfH
#: chart2/uiconfig/ui/sidebarelements.ui:173
msgctxt "sidebarelements|comboboxtext_legend"
msgid "Top"
msgstr "顶部"

#. AYbfc
#: chart2/uiconfig/ui/sidebarelements.ui:174
msgctxt "sidebarelements|comboboxtext_legend"
msgid "Bottom"
msgstr "底部"

#. Hdrnv
#: chart2/uiconfig/ui/sidebarelements.ui:175
msgctxt "sidebarelements|comboboxtext_legend"
msgid "Left"
msgstr "左侧"

#. WxtCZ
#: chart2/uiconfig/ui/sidebarelements.ui:193
msgctxt "sidebarelements|checkbutton_no_overlay"
msgid "Show the legend without overlapping the chart"
msgstr "逗号"

#. UVbZR
#: chart2/uiconfig/ui/sidebarelements.ui:212
msgctxt "sidebarelements|label_legen"
msgid "Legend"
msgstr "图例"

#. Am6Gz
#: chart2/uiconfig/ui/sidebarelements.ui:242
msgctxt "sidebarelements|checkbutton_x_axis"
msgid "X axis"
msgstr "X轴"

#. P5gxx
#: chart2/uiconfig/ui/sidebarelements.ui:256
msgctxt "sidebarelements|checkbutton_x_axis_title"
msgid "X axis title"
msgstr "X轴标题"

#. iMXPp
#: chart2/uiconfig/ui/sidebarelements.ui:270
msgctxt "sidebarelements|checkbutton_y_axis"
msgid "Y axis"
msgstr "Y轴"

#. vF4oS
#: chart2/uiconfig/ui/sidebarelements.ui:284
msgctxt "sidebarelements|checkbutton_y_axis_title"
msgid "Y axis title"
msgstr "Y轴标题"

#. A35cf
#: chart2/uiconfig/ui/sidebarelements.ui:298
msgctxt "sidebarelements|checkbutton_z_axis"
msgid "Z axis"
msgstr "Z轴"

#. RZFAU
#: chart2/uiconfig/ui/sidebarelements.ui:312
msgctxt "sidebarelements|checkbutton_z_axis_title"
msgid "Z axis title"
msgstr "Z轴标题"

#. GoJDH
#: chart2/uiconfig/ui/sidebarelements.ui:326
msgctxt "sidebarelements|checkbutton_2nd_x_axis"
msgid "2nd X axis"
msgstr "第二X轴"

#. nsoDZ
#: chart2/uiconfig/ui/sidebarelements.ui:339
msgctxt "sidebarelements|checkbutton_2nd_x_axis_title"
msgid "2nd X axis title"
msgstr "第二X轴标题"

#. bGsCM
#: chart2/uiconfig/ui/sidebarelements.ui:352
msgctxt "sidebarelements|checkbutton_2nd_y_axis"
msgid "2nd Y axis"
msgstr "第二Y轴"

#. yDNuy
#: chart2/uiconfig/ui/sidebarelements.ui:365
msgctxt "sidebarelements|checkbutton_2nd_y_axis_title"
msgid "2nd Y axis title"
msgstr "第二Y轴标题"

#. ScLEM
#: chart2/uiconfig/ui/sidebarelements.ui:382
msgctxt "sidebarelements|label_axes"
msgid "Axes"
msgstr "坐标轴"

#. RL8AA
#: chart2/uiconfig/ui/sidebarelements.ui:412
msgctxt "sidebarelements|checkbutton_gridline_horizontal_major"
msgid "Horizontal major"
msgstr "水平主网格"

#. FYBSZ
#: chart2/uiconfig/ui/sidebarelements.ui:426
msgctxt "sidebarelements|checkbutton_gridline_vertical_major"
msgid "Vertical major"
msgstr "垂直主网格"

#. VCTTS
#: chart2/uiconfig/ui/sidebarelements.ui:440
msgctxt "sidebarelements|checkbutton_gridline_horizontal_minor"
msgid "Horizontal minor"
msgstr "水平次网格"

#. QDFEZ
#: chart2/uiconfig/ui/sidebarelements.ui:454
msgctxt "sidebarelements|checkbutton_gridline_vertical_minor"
msgid "Vertical minor"
msgstr "垂直次网格"

#. yeE2v
#: chart2/uiconfig/ui/sidebarelements.ui:472
msgctxt "sidebarelements|label_gri"
msgid "Gridlines"
msgstr "网格线"

#. uacDo
#: chart2/uiconfig/ui/sidebarelements.ui:493
msgctxt "sidebarelements|text_title"
msgid "Title"
msgstr "标题"

#. jXGDE
#: chart2/uiconfig/ui/sidebarelements.ui:504
msgctxt "sidebarelements|text_subtitle"
msgid "Subtitle"
msgstr "副标题"

#. SCPM4
#: chart2/uiconfig/ui/sidebarerrorbar.ui:60
msgctxt "sidebarerrorbar|label2"
msgid "Category:"
msgstr "类别:"

#. 8Pb84
#: chart2/uiconfig/ui/sidebarerrorbar.ui:74
msgctxt "sidebarerrorbar|comboboxtext_type"
msgid "Constant"
msgstr "常数"

#. Lz8Lo
#: chart2/uiconfig/ui/sidebarerrorbar.ui:75
msgctxt "sidebarerrorbar|comboboxtext_type"
msgid "Percentage"
msgstr "百分比"

#. Ap367
#: chart2/uiconfig/ui/sidebarerrorbar.ui:76
msgctxt "sidebarerrorbar|comboboxtext_type"
msgid "Cell Range or Data Table"
msgstr "单元格区域或数据表格"

#. Lqw6L
#: chart2/uiconfig/ui/sidebarerrorbar.ui:77
msgctxt "sidebarerrorbar|comboboxtext_type"
msgid "Standard deviation"
msgstr "标准偏差"

#. qUL78
#: chart2/uiconfig/ui/sidebarerrorbar.ui:78
msgctxt "sidebarerrorbar|comboboxtext_type"
msgid "Standard error"
msgstr "标准误差"

#. KUCgB
#: chart2/uiconfig/ui/sidebarerrorbar.ui:79
msgctxt "sidebarerrorbar|comboboxtext_type"
msgid "Variance"
msgstr "方差"

#. QDwJu
#: chart2/uiconfig/ui/sidebarerrorbar.ui:80
msgctxt "sidebarerrorbar|comboboxtext_type"
msgid "Error margin"
msgstr "误差范围"

#. US82z
#: chart2/uiconfig/ui/sidebarerrorbar.ui:93
msgctxt "sidebarerrorbar|label3"
msgid "Positive (+):"
msgstr "正值(+):"

#. NJdbG
#: chart2/uiconfig/ui/sidebarerrorbar.ui:105
msgctxt "sidebarerrorbar|label4"
msgid "Negative (-):"
msgstr "负值(-):"

#. GBewc
#: chart2/uiconfig/ui/sidebarerrorbar.ui:117
msgctxt "sidebarerrorbar|spinbutton_pos"
msgid "0.00"
msgstr "0.00"

#. e3GvR
#: chart2/uiconfig/ui/sidebarerrorbar.ui:132
msgctxt "sidebarerrorbar|spinbutton_neg"
msgid "0.00"
msgstr "0.00"

#. 34Vax
#: chart2/uiconfig/ui/sidebarerrorbar.ui:153
msgctxt "sidebarerrorbar|radiobutton_positive_negative|tooltip_text"
msgid "Positive and Negative"
msgstr "正负值"

#. gETvJ
#: chart2/uiconfig/ui/sidebarerrorbar.ui:170
msgctxt "sidebarerrorbar|radiobutton_positive|tooltip_text"
msgid "Positive"
msgstr "正值"

#. 3Ur2d
#: chart2/uiconfig/ui/sidebarerrorbar.ui:187
msgctxt "sidebarerrorbar|radiobutton_negative|tooltip_text"
msgid "Negative"
msgstr "负值"

#. iCPU4
#: chart2/uiconfig/ui/sidebarerrorbar.ui:210
msgctxt "sidebarerrorbar|label5"
msgid "Indicator"
msgstr "指标"

#. qJBsd
#: chart2/uiconfig/ui/sidebarseries.ui:41
msgctxt "sidebarseries|checkbutton_label"
msgid "Show data labels"
msgstr "显示数据标签"

#. BsC9D
#: chart2/uiconfig/ui/sidebarseries.ui:64
msgctxt "sidebarseries|label_box"
msgid "P_lacement:"
msgstr "位置(_L):"

#. Dk3GN
#: chart2/uiconfig/ui/sidebarseries.ui:79
msgctxt "sidebarseries|comboboxtext_label"
msgid "Above"
msgstr "上部"

#. e4znD
#: chart2/uiconfig/ui/sidebarseries.ui:80
msgctxt "sidebarseries|comboboxtext_label"
msgid "Below"
msgstr "下部"

#. CWwzt
#: chart2/uiconfig/ui/sidebarseries.ui:81
msgctxt "sidebarseries|comboboxtext_label"
msgid "Center"
msgstr "居中"

#. osWVq
#: chart2/uiconfig/ui/sidebarseries.ui:82
msgctxt "sidebarseries|comboboxtext_label"
msgid "Outside"
msgstr "外侧"

#. U3N4S
#: chart2/uiconfig/ui/sidebarseries.ui:83
msgctxt "sidebarseries|comboboxtext_label"
msgid "Inside"
msgstr "内侧"

#. pAmg7
#: chart2/uiconfig/ui/sidebarseries.ui:84
msgctxt "sidebarseries|comboboxtext_label"
msgid "Near origin"
msgstr "接近源"

#. erC9C
#: chart2/uiconfig/ui/sidebarseries.ui:109
msgctxt "sidebarseries|checkbutton_trendline"
msgid "Show trendline"
msgstr "显示趋势线"

#. bXUND
#: chart2/uiconfig/ui/sidebarseries.ui:140
msgctxt "sidebarseries|checkbutton_y_error"
msgid "Y error bars"
msgstr "Y误差线"

#. zK6DE
#: chart2/uiconfig/ui/sidebarseries.ui:155
msgctxt "sidebarseries|checkbutton_x_error"
msgid "X error bars"
msgstr "X误差限"

#. FFPa2
#: chart2/uiconfig/ui/sidebarseries.ui:174
msgctxt "sidebarseries|label1"
msgid "Error Bars"
msgstr "误差线"

#. vhdnt
#: chart2/uiconfig/ui/sidebarseries.ui:203
msgctxt "sidebarseries|radiobutton_primary_axis"
msgid "Primary Y axis"
msgstr "主Y轴"

#. VPWVq
#: chart2/uiconfig/ui/sidebarseries.ui:219
msgctxt "sidebarseries|radiobutton_secondary_axis"
msgid "Secondary Y axis"
msgstr "次Y轴"

#. qE5HF
#: chart2/uiconfig/ui/sidebarseries.ui:240
msgctxt "sidebarseries|axis_label"
msgid "Align Series to Axis"
msgstr "将数据序列对齐到轴"

#. fvnkG
#: chart2/uiconfig/ui/sidebarseries.ui:256
msgctxt "sidebarseries|label_series_tmpl"
msgid "Data series '%1'"
msgstr "数据序列 '%1'"

#. mZfrk
#: chart2/uiconfig/ui/sidebartype.ui:85
msgctxt "sidebartype|3dlook"
msgid "_3D Look"
msgstr "_3D 外观"

#. mjrkY
#: chart2/uiconfig/ui/sidebartype.ui:104
msgctxt "sidebartype|3dscheme"
msgid "Simple"
msgstr "简单"

#. urfc7
#: chart2/uiconfig/ui/sidebartype.ui:105
msgctxt "sidebartype|3dscheme"
msgid "Realistic"
msgstr "现实"

#. gYXXE
#: chart2/uiconfig/ui/sidebartype.ui:126
msgctxt "sidebartype|shapeft"
msgid "Sh_ape"
msgstr "形状 (_A)"

#. B6KS5
#: chart2/uiconfig/ui/sidebartype.ui:188
msgctxt "sidebartype|stack"
msgid "_Stack series"
msgstr "堆叠序列 (_S)"

#. Yau6n
#: chart2/uiconfig/ui/sidebartype.ui:208
msgctxt "sidebartype|ontop"
msgid "On top"
msgstr "在上部"

#. f2J43
#: chart2/uiconfig/ui/sidebartype.ui:222
msgctxt "sidebartype|percent"
msgid "Percent"
msgstr "百分比"

#. iDSaa
#: chart2/uiconfig/ui/sidebartype.ui:236
msgctxt "sidebartype|deep"
msgid "Deep"
msgstr "深入"

#. KaS7Z
#: chart2/uiconfig/ui/sidebartype.ui:264
msgctxt "sidebartype|linetypeft"
msgid "_Line type"
msgstr "线型 (_L)"

#. Hqc3N
#: chart2/uiconfig/ui/sidebartype.ui:279
msgctxt "sidebartype|linetype"
msgid "Straight"
msgstr "直线"

#. EB58Z
#: chart2/uiconfig/ui/sidebartype.ui:280
msgctxt "sidebartype|linetype"
msgid "Smooth"
msgstr "平滑线"

#. qLn3k
#: chart2/uiconfig/ui/sidebartype.ui:281
msgctxt "sidebartype|linetype"
msgid "Stepped"
msgstr "阶梯线"

#. jKDXh
#: chart2/uiconfig/ui/sidebartype.ui:291
msgctxt "sidebartype|properties"
msgid "Properties..."
msgstr "属性..."

#. xW9CQ
#: chart2/uiconfig/ui/sidebartype.ui:309
msgctxt "sidebartype|sort"
msgid "_Sort by X values"
msgstr "根据 X 值排序 (_S)"

#. thu3G
#: chart2/uiconfig/ui/sidebartype.ui:331
msgctxt "sidebartype|nolinesft"
msgid "_Number of lines"
msgstr "线条数量 (_N)"

#. Ledzw
#: chart2/uiconfig/ui/smoothlinesdlg.ui:22
msgctxt "smoothlinesdlg|SmoothLinesDialog"
msgid "Smooth Lines"
msgstr "平滑线"

#. vmRbz
#: chart2/uiconfig/ui/smoothlinesdlg.ui:114
msgctxt "smoothlinesdlg|TypeLabel"
msgid "Line _Type:"
msgstr "线条类型(_T):"

#. Nkqhi
#: chart2/uiconfig/ui/smoothlinesdlg.ui:131
msgctxt "smoothlinesdlg|SplineTypeComboBox"
msgid "Cubic spline"
msgstr "三次样条"

#. LTCVw
#: chart2/uiconfig/ui/smoothlinesdlg.ui:132
msgctxt "smoothlinesdlg|SplineTypeComboBox"
msgid "B-spline"
msgstr "B-spline曲线"

#. EJdNq
#: chart2/uiconfig/ui/smoothlinesdlg.ui:136
msgctxt "smoothlinesdlg|extended_tip|SplineTypeComboBox"
msgid "Apply a line curve model."
msgstr "应用线条曲线模型。"

#. eecxc
#: chart2/uiconfig/ui/smoothlinesdlg.ui:167
msgctxt "smoothlinesdlg|ResolutionLabel"
msgid "_Resolution:"
msgstr "解析度(_R):"

#. AdG5v
#: chart2/uiconfig/ui/smoothlinesdlg.ui:181
msgctxt "smoothlinesdlg|PolynomialsLabel"
msgid "_Degree of polynomials:"
msgstr "多项式次数(_D):"

#. X35yY
#: chart2/uiconfig/ui/smoothlinesdlg.ui:199
msgctxt "smoothlinesdlg|extended_tip|ResolutionSpinbutton"
msgid "Set the resolution."
msgstr "设置分辨率。"

#. a4btg
#: chart2/uiconfig/ui/smoothlinesdlg.ui:217
msgctxt "smoothlinesdlg|extended_tip|PolynomialsSpinButton"
msgid "Set the degree of the polynomials."
msgstr "设置多项式的阶数。"

#. YECJR
#: chart2/uiconfig/ui/smoothlinesdlg.ui:249
msgctxt "smoothlinesdlg|extended_tip|SmoothLinesDialog"
msgid "Apply a line curve model."
msgstr "应用线条曲线模型。"

#. RyJg5
#: chart2/uiconfig/ui/steppedlinesdlg.ui:128
msgctxt "steppedlinesdlg|step_start_rb"
msgid "_Start with horizontal line"
msgstr "以水平线开头(_S)"

#. Zcr4L
#: chart2/uiconfig/ui/steppedlinesdlg.ui:137
msgctxt "steppedlinesdlg|extended_tip|step_start_rb"
msgid "Start with horizontal line and step up vertically at the end."
msgstr "以水平线开始，以垂直线升阶到结尾。"

#. iJCAt
#: chart2/uiconfig/ui/steppedlinesdlg.ui:148
msgctxt "steppedlinesdlg|step_center_x_rb"
msgid "Step at the _horizontal mean"
msgstr "在水平均值处升阶(_H)"

#. D5DGL
#: chart2/uiconfig/ui/steppedlinesdlg.ui:158
msgctxt "steppedlinesdlg|extended_tip|step_center_x_rb"
msgid "Start to step up vertically and end with horizontal line."
msgstr "以垂直线开始升阶，以垂直线结尾。"

#. vtGik
#: chart2/uiconfig/ui/steppedlinesdlg.ui:169
msgctxt "steppedlinesdlg|step_end_rb"
msgid "_End with horizontal line"
msgstr "以水平线结尾(_E)"

#. nGAhe
#: chart2/uiconfig/ui/steppedlinesdlg.ui:179
msgctxt "steppedlinesdlg|extended_tip|step_end_rb"
msgid "Start with horizontal line, step up vertically in the middle of the X values and end with horizontal line."
msgstr "以水平线开始，在X值的中心升阶，以垂直线结尾。"

#. X3536
#: chart2/uiconfig/ui/steppedlinesdlg.ui:190
msgctxt "steppedlinesdlg|step_center_y_rb"
msgid "Step to the _vertical mean"
msgstr "在垂直均值处升阶(_V)"

#. S528C
#: chart2/uiconfig/ui/steppedlinesdlg.ui:200
msgctxt "steppedlinesdlg|extended_tip|step_center_y_rb"
msgid "Start to step up vertically to the middle of the Y values, draw a horizontal line and finish by stepping vertically to the end."
msgstr "开始时垂直升阶至Y值的中心，绘制一个水平线，然后以垂直阶梯结束。"

#. oDDMr
#: chart2/uiconfig/ui/steppedlinesdlg.ui:226
msgctxt "steppedlinesdlg|label2"
msgid "Type of Stepping"
msgstr "阶梯类型"

#. K2DaE
#: chart2/uiconfig/ui/titlerotationtabpage.ui:43
msgctxt "titlerotationtabpage|extended_tip|OrientDegree"
msgid "Allows you to manually enter the orientation angle."
msgstr "使您可以手动输入方向角度。"

#. ViJ9k
#: chart2/uiconfig/ui/titlerotationtabpage.ui:57
msgctxt "titlerotationtabpage|degreeL"
msgid "_Degrees"
msgstr "度(_D)"

#. tv9xJ
#: chart2/uiconfig/ui/titlerotationtabpage.ui:92
msgctxt "titlerotationtabpage|stackedCB"
msgid "Ve_rtically stacked"
msgstr "垂直堆积(_R)"

#. VGDph
#: chart2/uiconfig/ui/titlerotationtabpage.ui:101
msgctxt "titlerotationtabpage|extended_tip|stackedCB"
msgid "Assigns vertical text orientation for cell contents."
msgstr "指定单元格内容的文字方向为垂直。"

#. 3BaMa
#: chart2/uiconfig/ui/titlerotationtabpage.ui:113
msgctxt "titlerotationtabpage|labelABCD"
msgid "ABCD"
msgstr "ABCD"

#. dAHWb
#: chart2/uiconfig/ui/titlerotationtabpage.ui:130
msgctxt "titlerotationtabpage|textdirL"
msgid "Te_xt direction:"
msgstr "文字方向(_X):"

#. i5UYm
#: chart2/uiconfig/ui/titlerotationtabpage.ui:144
msgctxt "titlerotationtabpage|extended_tip|textdirLB"
msgid "Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled."
msgstr "为使用复杂文字版式 (CTL) 的段落指定文字方向。只有启用了复杂文字版式时，此功能才可用。"

#. 9cDiw
#: chart2/uiconfig/ui/titlerotationtabpage.ui:163
msgctxt "titlerotationtabpage|extended_tip|dialCtrl"
msgid "Clicking anywhere on the wheel defines the variable text orientation."
msgstr "点击滚轮上的任意位置可以定义可变文本方向。"

#. syx89
#: chart2/uiconfig/ui/titlerotationtabpage.ui:178
msgctxt "titlerotationtabpage|labelTextOrient"
msgid "Text Orientation"
msgstr "文字方向"

#. CDDxo
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:20
msgctxt "tp_3D_SceneAppearance|FT_SCHEME"
msgid "Sche_me"
msgstr "方案(_M)"

#. 4uCgf
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:36
msgctxt "tp_3D_SceneAppearance|liststoreSCHEME"
msgid "Simple"
msgstr "简单"

#. uVRvv
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:37
msgctxt "tp_3D_SceneAppearance|liststoreSCHEME"
msgid "Realistic"
msgstr "逼真"

#. tFKjs
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:38
msgctxt "tp_3D_SceneAppearance|liststoreSCHEME"
msgid "Custom"
msgstr "自定义"

#. raML6
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:42
msgctxt "tp_3D_SceneAppearance|extended_tip|LB_SCHEME"
msgid "Select a scheme from the list box, or click any of the check boxes below."
msgstr "从列表框中选择一个模式，或点击下方的任意复选框。"

#. EyGsf
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:78
msgctxt "tp_3D_SceneAppearance|CB_SHADING"
msgid "_Shading"
msgstr "阴影(_S)"

#. W68hV
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:86
msgctxt "tp_3D_SceneAppearance|extended_tip|CB_SHADING"
msgid "Applies Gouraud shading if marked, or flat shading if unmarked."
msgstr "如果标记，则使用 Gouraud 底纹，如果未标记，则使用平面底纹。"

#. SMFrD
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:98
msgctxt "tp_3D_SceneAppearance|CB_OBJECTLINES"
msgid "_Object borders"
msgstr "对象边框(_O)"

#. CQjGV
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:106
msgctxt "tp_3D_SceneAppearance|extended_tip|CB_OBJECTLINES"
msgid "Shows borders around the areas by setting the line style to Solid."
msgstr "通过为立方体设置线条样式，显示区域周围的边框。"

#. CpWRj
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:118
msgctxt "tp_3D_SceneAppearance|CB_ROUNDEDEDGE"
msgid "_Rounded edges"
msgstr "边角变圆 (_R)"

#. c5pNB
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:126
msgctxt "tp_3D_SceneAppearance|extended_tip|CB_ROUNDEDEDGE"
msgid "Edges are rounded by 5%."
msgstr "边缘被平滑 5%。"

#. U5CTF
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:37
msgctxt "tp_3D_SceneGeometry|CBX_RIGHT_ANGLED_AXES"
msgid "_Right-angled axes"
msgstr "直角坐标轴(_R)"

#. QxmLn
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:45
msgctxt "tp_3D_SceneGeometry|extended_tip|CBX_RIGHT_ANGLED_AXES"
msgid "If Right-angled axes is enabled, you can rotate the chart contents only in X and Y direction, that is, parallel to the chart borders. Right-angled axes is enabled by default for newly created 3D charts. Pie and Donut charts do not support right-angled axes."
msgstr "如果直角坐标轴是激活状态，您只能在 X 和 Y 轴方向上旋转图表内容，即，平行于图表边界。对于新创建的三维图表直角坐标轴默认为激活状态。饼图和圆环图图表不支持直角坐标轴。"

#. y8Tyg
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:59
msgctxt "tp_3D_SceneGeometry|FT_X_ROTATION"
msgid "_X rotation"
msgstr "绕 _X 轴旋转"

#. TJ2Xp
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:73
msgctxt "tp_3D_SceneGeometry|FT_Y_ROTATION"
msgid "_Y rotation"
msgstr "绕 _Y 轴旋转"

#. UTAG5
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:87
msgctxt "tp_3D_SceneGeometry|FT_Z_ROTATION"
msgid "_Z rotation"
msgstr "绕 _Z 轴旋转"

#. ZC8ZQ
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:99
msgctxt "tp_3D_SceneGeometry|CBX_PERSPECTIVE"
msgid "_Perspective"
msgstr "透视(_P)"

#. xyePC
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:110
msgctxt "tp_3D_SceneGeometry|extended_tip|CBX_PERSPECTIVE"
msgid "Mark the Perspective box to view the chart as through a camera lens. Use the spin button to set the percentage. With a high percentage nearer objects look bigger than more distant objects."
msgstr "标记「透视」复选框，使用如透过照相机镜头的效果查看图表。使用数值调节钮设置百分比。高的百分比使近的对象看起来比其他远的对象更大。"

#. mdPAi
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:131
msgctxt "tp_3D_SceneGeometry|MTR_FLD_PERSPECTIVE-atkobject"
msgid "Perspective"
msgstr "透视"

#. JECHC
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:132
msgctxt "tp_3D_SceneGeometry|extended_tip|MTR_FLD_PERSPECTIVE"
msgid "Mark the Perspective box to view the chart as through a camera lens. Use the spin button to set the percentage. With a high percentage nearer objects look bigger than more distant objects."
msgstr "标记「透视」复选框，使用如透过照相机镜头的效果查看图表。使用数值调节钮设置百分比。高的百分比使近的对象看起来比其他远的对象更大。"

#. PP8jT
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:151
msgctxt "tp_3D_SceneGeometry|extended_tip|MTR_FLD_Z_ROTATION"
msgid "Sets the rotation of the chart on the z axis. The preview responds to the new settings."
msgstr "设置图表在 z 轴上的旋转。预览将反映新的设置。"

#. AyMWn
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:169
msgctxt "tp_3D_SceneGeometry|extended_tip|MTR_FLD_Y_ROTATION"
msgid "Sets the rotation of the chart on the y axis. The preview responds to the new settings."
msgstr "设置图表在 y 轴上的旋转。预览将反映新的设置。"

#. EGS4B
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:187
msgctxt "tp_3D_SceneGeometry|extended_tip|MTR_FLD_X_ROTATION"
msgid "Sets the rotation of the chart on the x axis. The preview responds to the new settings."
msgstr "设置图表在 x 轴上的旋转。预览将反映新的设置。"

#. RGQDC
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:92
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_1|tooltip_text"
msgid "Light source 1"
msgstr "光源 1"

#. EQb5g
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:97
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_1"
msgid "Click to enable or disable the specular light source with highlights."
msgstr "点击以启用或禁用带强光的镜面光源。"

#. bwfDH
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:111
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_2|tooltip_text"
msgid "Light source 2"
msgstr "光源 2"

#. jkJM8
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:116
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_2"
msgid "Click to enable or disable the uniform light source."
msgstr "点击启用或禁用统一光源。"

#. uMVDV
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:130
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_3|tooltip_text"
msgid "Light source 3"
msgstr "光源 3"

#. ZEUk7
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:135
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_3"
msgid "Click to enable or disable the uniform light source."
msgstr "点击启用或禁用统一光源。"

#. 6CBDG
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:149
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_4|tooltip_text"
msgid "Light source 4"
msgstr "光源 4"

#. X5ZD3
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:154
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_4"
msgid "Click to enable or disable the uniform light source."
msgstr "点击启用或禁用统一光源。"

#. Hf5Du
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:168
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_5|tooltip_text"
msgid "Light source 5"
msgstr "光源 5"

#. mUPX4
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:173
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_5"
msgid "Click to enable or disable the uniform light source."
msgstr "点击启用或禁用统一光源。"

#. T7qDZ
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:187
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_6|tooltip_text"
msgid "Light source 6"
msgstr "光源 6"

#. AAkx2
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:192
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_6"
msgid "Click to enable or disable the uniform light source."
msgstr "点击启用或禁用统一光源。"

#. mSsDD
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:206
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_7|tooltip_text"
msgid "Light source 7"
msgstr "光源 7"

#. Rh9Hz
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:211
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_7"
msgid "Click to enable or disable the uniform light source."
msgstr "点击启用或禁用统一光源。"

#. wY5CR
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:225
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_8|tooltip_text"
msgid "Light source 8"
msgstr "光源 8"

#. EbsUA
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:230
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_8"
msgid "Click to enable or disable the uniform light source."
msgstr "点击启用或禁用统一光源。"

#. DwEDc
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:264
msgctxt "tp_3D_SceneIllumination|extended_tip|LB_LIGHTSOURCE"
msgid "Select a color for the selected light source."
msgstr "为选中的光源选择一种颜色。"

#. gfdAB
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:279
msgctxt "tp_3D_SceneIllumination|BTN_LIGHTSOURCE_COLOR|tooltip_text"
msgid "Select a color using the color dialog"
msgstr "在颜色对话框中选择一种颜色"

#. JnBhP
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:283
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHTSOURCE_COLOR"
msgid "Select a color using the color dialog."
msgstr "使用颜色对话框选择一种颜色。"

#. mgXyK
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:306
msgctxt "tp_3D_SceneIllumination|FT_LIGHTSOURCE"
msgid "_Light Source"
msgstr "光源(_L)"

#. WssJA
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:348
msgctxt "tp_3D_SceneIllumination|extended_tip|LB_AMBIENTLIGHT"
msgid "Select a color for the ambient light."
msgstr "为环境光选择颜色。"

#. NpAu7
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:363
msgctxt "tp_3D_SceneIllumination|BTN_AMBIENT_COLOR|tooltip_text"
msgid "Select a color using the color dialog"
msgstr "在颜色对话框中选择一种颜色"

#. 943Za
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:367
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_AMBIENT_COLOR"
msgid "Select a color using the color dialog."
msgstr "使用颜色对话框选择一种颜色。"

#. LFMGL
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:383
msgctxt "tp_3D_SceneIllumination|FT_AMBIENTLIGHT"
msgid "_Ambient Light"
msgstr "环境光(_A)"

#. snUGf
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:427
msgctxt "tp_3D_SceneIllumination|CTL_LIGHT_PREVIEW|tooltip_text"
msgid "Light Preview"
msgstr "光照预览"

#. tQBhd
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:485
msgctxt "tp_3D_SceneIllumination|extended_tip|tp_3D_SceneIllumination"
msgid "Set the light sources for the 3D view."
msgstr "为 3D 视图设置光源。"

#. XRVrG
#: chart2/uiconfig/ui/tp_AxisPositions.ui:44
msgctxt "tp_AxisPositions|FT_CROSSES_OTHER_AXIS_AT"
msgid "_Cross other axis at"
msgstr "与其他轴线相交于(_C)"

#. Z734o
#: chart2/uiconfig/ui/tp_AxisPositions.ui:60
msgctxt "tp_AxisPositions|LB_CROSSES_OTHER_AXIS_AT"
msgid "Start"
msgstr "起始位置"

#. u6i7J
#: chart2/uiconfig/ui/tp_AxisPositions.ui:61
msgctxt "tp_AxisPositions|LB_CROSSES_OTHER_AXIS_AT"
msgid "End"
msgstr "结束位置"

#. vAUzq
#: chart2/uiconfig/ui/tp_AxisPositions.ui:62
msgctxt "tp_AxisPositions|LB_CROSSES_OTHER_AXIS_AT"
msgid "Value"
msgstr "值"

#. 5CSqT
#: chart2/uiconfig/ui/tp_AxisPositions.ui:63
msgctxt "tp_AxisPositions|LB_CROSSES_OTHER_AXIS_AT"
msgid "Category"
msgstr "类别"

#. eKYhk
#: chart2/uiconfig/ui/tp_AxisPositions.ui:67
msgctxt "tp_AxisPositions|extended_tip|LB_CROSSES_OTHER_AXIS_AT"
msgid "Select where to cross the other axis: at start, at end, at a specified value, or at a category."
msgstr "选择与其他轴交叉的位置: 在起始位置、在结束位置、在某一指定值，或在某一类别。"

#. FwCEp
#: chart2/uiconfig/ui/tp_AxisPositions.ui:86
msgctxt "tp_AxisPositions|extended_tip|EDT_CROSSES_OTHER_AXIS_AT"
msgid "Enter the value where the axis line should cross the other axis."
msgstr "输入轴线与其他轴交叉位置的值。"

#. AnLbY
#: chart2/uiconfig/ui/tp_AxisPositions.ui:110
msgctxt "tp_AxisPositions|extended_tip|EDT_CROSSES_OTHER_AXIS_AT_CATEGORY"
msgid "Select the category where the axis line should cross the other axis."
msgstr "选择轴线与其他轴交叉位置的类别。"

#. VYVhe
#: chart2/uiconfig/ui/tp_AxisPositions.ui:129
msgctxt "tp_AxisPositions|CB_AXIS_BETWEEN_CATEGORIES"
msgid "Axis _between categories"
msgstr "类别之间的轴(_B)"

#. bW7T9
#: chart2/uiconfig/ui/tp_AxisPositions.ui:147
msgctxt "tp_AxisPositions|TXT_AXIS_LINE"
msgid "Axis Line"
msgstr "轴线"

#. 5ezBt
#: chart2/uiconfig/ui/tp_AxisPositions.ui:177
msgctxt "tp_AxisPositions|RB_ON"
msgid "_On tick marks"
msgstr "在刻度标记处(_O)"

#. FaKJZ
#: chart2/uiconfig/ui/tp_AxisPositions.ui:185
msgctxt "tp_AxisPositions|extended_tip|RB_ON"
msgid "Specifies that the axis is positioned on the first/last tickmarks. This makes the data points visual representation begin/end at the value axis."
msgstr ""

#. gSFeZ
#: chart2/uiconfig/ui/tp_AxisPositions.ui:196
msgctxt "tp_AxisPositions|RB_BETWEEN"
msgid "_Between tick marks"
msgstr "在刻度标记之间(_B)"

#. BSx2x
#: chart2/uiconfig/ui/tp_AxisPositions.ui:205
msgctxt "tp_AxisPositions|extended_tip|RB_BETWEEN"
msgid "Specifies that the axis is positioned between the tickmarks. This makes the data points visual representation begin/end at a distance from the value axis."
msgstr ""

#. ExBDm
#: chart2/uiconfig/ui/tp_AxisPositions.ui:220
msgctxt "tp_AxisPositions|TXT_POSITION"
msgid "Position Axis"
msgstr "将坐标轴放置在"

#. 5AGbD
#: chart2/uiconfig/ui/tp_AxisPositions.ui:257
msgctxt "tp_AxisPositions|FT_PLACE_LABELS"
msgid "_Place labels"
msgstr "将标签放置在 (_P)"

#. GDk2L
#: chart2/uiconfig/ui/tp_AxisPositions.ui:273
msgctxt "tp_AxisPositions|LB_PLACE_LABELS"
msgid "Near axis"
msgstr "靠近轴"

#. ZWQzB
#: chart2/uiconfig/ui/tp_AxisPositions.ui:274
msgctxt "tp_AxisPositions|LB_PLACE_LABELS"
msgid "Near axis (other side)"
msgstr "靠近轴 (另一侧)"

#. j3GGm
#: chart2/uiconfig/ui/tp_AxisPositions.ui:275
msgctxt "tp_AxisPositions|LB_PLACE_LABELS"
msgid "Outside start"
msgstr "起始位置的外侧"

#. mGDNr
#: chart2/uiconfig/ui/tp_AxisPositions.ui:276
msgctxt "tp_AxisPositions|LB_PLACE_LABELS"
msgid "Outside end"
msgstr "结束位置的外侧"

#. ChAqv
#: chart2/uiconfig/ui/tp_AxisPositions.ui:280
msgctxt "tp_AxisPositions|extended_tip|LB_PLACE_LABELS"
msgid "Select where to place the labels: near axis, near axis (other side), outside start, or outside end."
msgstr "选择放置标签的位置: 靠近轴、靠近轴 (其他边) 、起始位置之外或结束位置之外。"

#. DUNn4
#: chart2/uiconfig/ui/tp_AxisPositions.ui:305
msgctxt "tp_AxisPositions|FT_AXIS_LABEL_DISTANCE"
msgid "_Distance"
msgstr "距离(_D)"

#. Hkjze
#: chart2/uiconfig/ui/tp_AxisPositions.ui:342
msgctxt "tp_AxisPositions|TXT_FL_LABELS"
msgid "Labels"
msgstr "标签"

#. YBk4g
#: chart2/uiconfig/ui/tp_AxisPositions.ui:381
msgctxt "tp_AxisPositions|FT_MAJOR"
msgid "Major:"
msgstr "主间隔:"

#. G8MEU
#: chart2/uiconfig/ui/tp_AxisPositions.ui:397
msgctxt "tp_AxisPositions|FT_MINOR"
msgid "Minor:"
msgstr "次间隔:"

#. UN6Pr
#: chart2/uiconfig/ui/tp_AxisPositions.ui:411
msgctxt "tp_AxisPositions|CB_TICKS_INNER"
msgid "_Inner"
msgstr "内(_I)"

#. DpVNk
#: chart2/uiconfig/ui/tp_AxisPositions.ui:422
msgctxt "tp_AxisPositions|extended_tip|CB_TICKS_INNER"
msgid "Specifies that marks are placed on the inner side of the axis."
msgstr "指定将标记置于轴的内部。"

#. EhLxm
#: chart2/uiconfig/ui/tp_AxisPositions.ui:433
msgctxt "tp_AxisPositions|CB_TICKS_OUTER"
msgid "_Outer"
msgstr "外(_O)"

#. DGWEb
#: chart2/uiconfig/ui/tp_AxisPositions.ui:444
msgctxt "tp_AxisPositions|extended_tip|CB_TICKS_OUTER"
msgid "Specifies that marks are placed on the outer side of the axis."
msgstr "指定将标记置于轴的外部。"

#. RJXic
#: chart2/uiconfig/ui/tp_AxisPositions.ui:455
msgctxt "tp_AxisPositions|CB_MINOR_INNER"
msgid "I_nner"
msgstr "内(_N)"

#. jbRx3
#: chart2/uiconfig/ui/tp_AxisPositions.ui:466
msgctxt "tp_AxisPositions|extended_tip|CB_MINOR_INNER"
msgid "Specifies that minor interval marks are placed on the inner side of the axis."
msgstr "指定将次间距标记置于轴的内部。"

#. nBCFJ
#: chart2/uiconfig/ui/tp_AxisPositions.ui:477
msgctxt "tp_AxisPositions|CB_MINOR_OUTER"
msgid "O_uter"
msgstr "外(_U)"

#. JAi2f
#: chart2/uiconfig/ui/tp_AxisPositions.ui:488
msgctxt "tp_AxisPositions|extended_tip|CB_MINOR_OUTER"
msgid "Specifies that minor interval marks are placed on the outer side of the axis."
msgstr "指定将次间距标记置于轴的外部。"

#. XWuxR
#: chart2/uiconfig/ui/tp_AxisPositions.ui:513
msgctxt "tp_AxisPositions|FT_PLACE_TICKS"
msgid "Place _marks"
msgstr "将标记放置在 (_M)"

#. mvGBB
#: chart2/uiconfig/ui/tp_AxisPositions.ui:529
msgctxt "tp_AxisPositions|LB_PLACE_TICKS"
msgid "At labels"
msgstr "标签上"

#. dGAYz
#: chart2/uiconfig/ui/tp_AxisPositions.ui:530
msgctxt "tp_AxisPositions|LB_PLACE_TICKS"
msgid "At axis"
msgstr "坐标轴上"

#. TJAJB
#: chart2/uiconfig/ui/tp_AxisPositions.ui:531
msgctxt "tp_AxisPositions|LB_PLACE_TICKS"
msgid "At axis and labels"
msgstr "坐标轴和标签上"

#. tED2r
#: chart2/uiconfig/ui/tp_AxisPositions.ui:535
msgctxt "tp_AxisPositions|extended_tip|LB_PLACE_TICKS"
msgid "Select where to place the marks: at labels, at axis, or at axis and labels."
msgstr "选择放置标签的位置: 在标签上、在轴上，或在轴和标签上。"

#. jK9rf
#: chart2/uiconfig/ui/tp_AxisPositions.ui:558
msgctxt "tp_AxisPositions|TXT_FL_TICKS"
msgid "Interval Marks"
msgstr "间隔标记"

#. 4Jp7G
#: chart2/uiconfig/ui/tp_AxisPositions.ui:588
msgctxt "tp_AxisPositions|CB_MAJOR_GRID"
msgid "Show major _grid"
msgstr "显示主网格(_G)"

#. 7c2Hs
#: chart2/uiconfig/ui/tp_AxisPositions.ui:603
msgctxt "tp_AxisPositions|CB_MINOR_GRID"
msgid "_Show minor grid"
msgstr "显示次网格(_S)"

#. Dp5Ar
#: chart2/uiconfig/ui/tp_AxisPositions.ui:617
msgctxt "tp_AxisPositions|PB_MAJOR_GRID"
msgid "Mo_re..."
msgstr "更多...(_R)"

#. k5VQQ
#: chart2/uiconfig/ui/tp_AxisPositions.ui:630
msgctxt "tp_AxisPositions|PB_MINOR_GRID"
msgid "Mor_e..."
msgstr "更多...(_E)"

#. 7eDLK
#: chart2/uiconfig/ui/tp_AxisPositions.ui:648
msgctxt "tp_AxisPositions|label2"
msgid "Grids"
msgstr "网格"

#. CUoe3
#: chart2/uiconfig/ui/tp_ChartType.ui:48
msgctxt "tp_ChartType|FT_CAPTION_FOR_WIZARD"
msgid "Choose a Chart Type"
msgstr "选择图表类型"

#. wBFXQ
#: chart2/uiconfig/ui/tp_ChartType.ui:96
msgctxt "tp_ChartType|extended_tip|subtype"
msgid "Select a sub type of the basic chart type."
msgstr "选择基本图表类型的一种子类型。"

#. FSf6b
#: chart2/uiconfig/ui/tp_ChartType.ui:123
msgctxt "tp_ChartType|3dlook"
msgid "_3D Look"
msgstr "_3D 外观"

#. EB95g
#: chart2/uiconfig/ui/tp_ChartType.ui:133
msgctxt "tp_ChartType|extended_tip|3dlook"
msgid "Enables a 3D look for the data values."
msgstr "启用数据值的三维外观。"

#. FprGw
#: chart2/uiconfig/ui/tp_ChartType.ui:147
msgctxt "tp_ChartType|3dscheme"
msgid "Simple"
msgstr "简单"

#. pKhfX
#: chart2/uiconfig/ui/tp_ChartType.ui:148
msgctxt "tp_ChartType|3dscheme"
msgid "Realistic"
msgstr "逼真"

#. zZxWG
#: chart2/uiconfig/ui/tp_ChartType.ui:155
msgctxt "tp_ChartType|extended_tip|3dscheme"
msgid "Select the type of 3D look."
msgstr "选择三维外观的类型。"

#. FxHfq
#: chart2/uiconfig/ui/tp_ChartType.ui:173
msgctxt "tp_ChartType|shapeft"
msgid "Sh_ape"
msgstr "形状(_A)"

#. CCA3V
#: chart2/uiconfig/ui/tp_ChartType.ui:216
msgctxt "tp_ChartType|extended_tip|shape"
msgid "Select a shape from the list."
msgstr "从列表选择一个形状。"

#. G2u4D
#: chart2/uiconfig/ui/tp_ChartType.ui:241
msgctxt "tp_ChartType|stack"
msgid "_Stack series"
msgstr "堆叠序列(_S)"

#. h8wCq
#: chart2/uiconfig/ui/tp_ChartType.ui:248
msgctxt "tp_ChartType|extended_tip|stack"
msgid "Displays stacked series for Line charts."
msgstr "显示折线图表的堆叠序列。"

#. KfD2L
#: chart2/uiconfig/ui/tp_ChartType.ui:266
msgctxt "tp_ChartType|ontop"
msgid "On top"
msgstr "在顶端"

#. DY854
#: chart2/uiconfig/ui/tp_ChartType.ui:274
msgctxt "tp_ChartType|extended_tip|ontop"
msgid "Stack series display values on top of each other."
msgstr "堆叠序列显示彼此的累加值。"

#. C7JxK
#: chart2/uiconfig/ui/tp_ChartType.ui:285
msgctxt "tp_ChartType|percent"
msgid "Percent"
msgstr "百分比"

#. EVNAR
#: chart2/uiconfig/ui/tp_ChartType.ui:293
msgctxt "tp_ChartType|extended_tip|percent"
msgid "Stack series display values as percent."
msgstr "堆叠序列显示为百分比值。"

#. ijuPy
#: chart2/uiconfig/ui/tp_ChartType.ui:304
msgctxt "tp_ChartType|deep"
msgid "Deep"
msgstr "深度"

#. etF2p
#: chart2/uiconfig/ui/tp_ChartType.ui:331
msgctxt "tp_ChartType|linetypeft"
msgid "_Line type"
msgstr "线条类型(_L)"

#. RbyB4
#: chart2/uiconfig/ui/tp_ChartType.ui:345
msgctxt "tp_ChartType|linetype"
msgid "Straight"
msgstr "直线"

#. dG5tv
#: chart2/uiconfig/ui/tp_ChartType.ui:346
msgctxt "tp_ChartType|linetype"
msgid "Smooth"
msgstr "平滑线"

#. uHHpu
#: chart2/uiconfig/ui/tp_ChartType.ui:347
msgctxt "tp_ChartType|linetype"
msgid "Stepped"
msgstr "阶梯线"

#. G3eDR
#: chart2/uiconfig/ui/tp_ChartType.ui:351
msgctxt "tp_ChartType|extended_tip|linetype"
msgid "Choose the type of line to draw."
msgstr "选择要绘制的线条类型。"

#. JqNUv
#: chart2/uiconfig/ui/tp_ChartType.ui:362
msgctxt "tp_ChartType|properties"
msgid "Properties..."
msgstr "属性..."

#. EnymX
#: chart2/uiconfig/ui/tp_ChartType.ui:368
msgctxt "tp_ChartType|extended_tip|properties"
msgid "Opens a dialog to set the line or curve properties."
msgstr "打开一个对话框，以设置线条和曲线属性。"

#. KzGZQ
#: chart2/uiconfig/ui/tp_ChartType.ui:385
msgctxt "tp_ChartType|sort"
msgid "_Sort by X values"
msgstr "按 X 值排序(_S)"

#. tbgi3
#: chart2/uiconfig/ui/tp_ChartType.ui:392
msgctxt "tp_ChartType|extended_tip|sort"
msgid "Connects points by ascending X values, even if the order of values is different, in an XY scatter diagram."
msgstr "通过递增 X 值来连接点，即使在一个 XY 散点图中，值的顺序不相同。"

#. CmGat
#: chart2/uiconfig/ui/tp_ChartType.ui:411
msgctxt "tp_ChartType|nolinesft"
msgid "_Number of lines"
msgstr "线条数量(_N)"

#. bBgDJ
#: chart2/uiconfig/ui/tp_ChartType.ui:431
msgctxt "tp_ChartType|extended_tip|nolines"
msgid "Set the number of lines for the Column and Line chart type."
msgstr "设置柱形和折线图表类型的线条数目。"

#. M2sxB
#: chart2/uiconfig/ui/tp_ChartType.ui:500
msgctxt "tp_ChartType|extended_tip|charttype"
msgid "Select a basic chart type."
msgstr "选择一种基本图表类型。"

#. qRkoY
#: chart2/uiconfig/ui/tp_DataLabel.ui:33
msgctxt "tp_DataLabel|CB_VALUE_AS_NUMBER"
msgid "Show value as _number"
msgstr "以数字格式显示值(_N)"

#. uGdoi
#: chart2/uiconfig/ui/tp_DataLabel.ui:41
msgctxt "tp_DataLabel|extended_tip|CB_VALUE_AS_NUMBER"
msgid "Displays the absolute values of the data points."
msgstr "显示数据点的绝对值。"

#. wRisc
#: chart2/uiconfig/ui/tp_DataLabel.ui:52
msgctxt "tp_DataLabel|CB_VALUE_AS_PERCENTAGE"
msgid "Show value as _percentage"
msgstr "以百分比格式显示值(_P)"

#. FcaPo
#: chart2/uiconfig/ui/tp_DataLabel.ui:60
msgctxt "tp_DataLabel|extended_tip|CB_VALUE_AS_PERCENTAGE"
msgid "Displays the percentage of the data points in each column."
msgstr "显示各列中数据点的百分比。"

#. gyqnC
#: chart2/uiconfig/ui/tp_DataLabel.ui:71
msgctxt "tp_DataLabel|CB_CATEGORY"
msgid "Show _category"
msgstr "显示类别(_C)"

#. EZXZX
#: chart2/uiconfig/ui/tp_DataLabel.ui:79
msgctxt "tp_DataLabel|extended_tip|CB_CATEGORY"
msgid "Shows the data point text labels."
msgstr "显示数据点文字标签。"

#. kce65
#: chart2/uiconfig/ui/tp_DataLabel.ui:90
msgctxt "tp_DataLabel|CB_SYMBOL"
msgid "Show _legend key"
msgstr "显示图例(_L)"

#. Bm8gp
#: chart2/uiconfig/ui/tp_DataLabel.ui:98
msgctxt "tp_DataLabel|extended_tip|CB_SYMBOL"
msgid "Displays the legend icons next to each data point label."
msgstr "在各数据点标签旁边显示图例图标。"

#. K3uFN
#: chart2/uiconfig/ui/tp_DataLabel.ui:109
msgctxt "tp_DataLabel|CB_WRAP_TEXT"
msgid "Auto text _wrap"
msgstr "文本自动换行(_W)"

#. tgNDD
#: chart2/uiconfig/ui/tp_DataLabel.ui:123
msgctxt "tp_DataLabel|PB_NUMBERFORMAT"
msgid "Number _format..."
msgstr "数字格式(_F)..."

#. nzq24
#: chart2/uiconfig/ui/tp_DataLabel.ui:131
msgctxt "tp_DataLabel|extended_tip|PB_NUMBERFORMAT"
msgid "Opens a dialog to select the number format."
msgstr "打开对话框以选择数字格式。"

#. PYC2b
#: chart2/uiconfig/ui/tp_DataLabel.ui:142
msgctxt "tp_DataLabel|PB_PERCENT_NUMBERFORMAT"
msgid "Percentage f_ormat..."
msgstr "百分比格式...(_F)"

#. 3wD3x
#: chart2/uiconfig/ui/tp_DataLabel.ui:150
msgctxt "tp_DataLabel|extended_tip|PB_PERCENT_NUMBERFORMAT"
msgid "Opens a dialog to select the percentage format."
msgstr "打开对话框以选择百分比格式。"

#. gFELD
#: chart2/uiconfig/ui/tp_DataLabel.ui:163
msgctxt "tp_DataLabel|CT_LABEL_DIAL"
msgid "ABCD"
msgstr "ABCD"

#. GqA8C
#: chart2/uiconfig/ui/tp_DataLabel.ui:182
msgctxt "tp_DataLabel|FT_TEXT_SEPARATOR"
msgid "_Separator"
msgstr "分隔符(_S)"

#. oPhGH
#: chart2/uiconfig/ui/tp_DataLabel.ui:199
msgctxt "tp_DataLabel|liststoreSEPARATOR"
msgid "Space"
msgstr "空格"

#. fR4fG
#: chart2/uiconfig/ui/tp_DataLabel.ui:200
msgctxt "tp_DataLabel|liststoreSEPARATOR"
msgid "Comma"
msgstr "逗号"

#. 5baF4
#: chart2/uiconfig/ui/tp_DataLabel.ui:201
msgctxt "tp_DataLabel|liststoreSEPARATOR"
msgid "Semicolon"
msgstr "分号"

#. 8MGkQ
#: chart2/uiconfig/ui/tp_DataLabel.ui:202
msgctxt "tp_DataLabel|liststoreSEPARATOR"
msgid "New line"
msgstr "新行"

#. bpmiF
#: chart2/uiconfig/ui/tp_DataLabel.ui:203
msgctxt "tp_DataLabel|liststoreSEPARATOR"
msgid "Period"
msgstr "逗号"

#. jjR8u
#: chart2/uiconfig/ui/tp_DataLabel.ui:207
msgctxt "tp_DataLabel|extended_tip|LB_TEXT_SEPARATOR"
msgid "Selects the separator between multiple text strings for the same object."
msgstr "在多文本字符串之间为相同的对象选择分隔符。"

#. 2MNGz
#: chart2/uiconfig/ui/tp_DataLabel.ui:233
msgctxt "tp_DataLabel|FT_LABEL_PLACEMENT"
msgid "Place_ment"
msgstr "位置(_M)"

#. L2MYb
#: chart2/uiconfig/ui/tp_DataLabel.ui:250
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Best fit"
msgstr "最佳适应"

#. ba7eW
#: chart2/uiconfig/ui/tp_DataLabel.ui:251
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Center"
msgstr "居中"

#. nW5vs
#: chart2/uiconfig/ui/tp_DataLabel.ui:252
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Above"
msgstr "上方"

#. gW9Aa
#: chart2/uiconfig/ui/tp_DataLabel.ui:253
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Top left"
msgstr "左上"

#. UQBcJ
#: chart2/uiconfig/ui/tp_DataLabel.ui:254
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Left"
msgstr "左"

#. CVw6x
#: chart2/uiconfig/ui/tp_DataLabel.ui:255
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Bottom left"
msgstr "左下"

#. EF7Qb
#: chart2/uiconfig/ui/tp_DataLabel.ui:256
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Below"
msgstr "下方"

#. bdAYf
#: chart2/uiconfig/ui/tp_DataLabel.ui:257
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Bottom right"
msgstr "右下"

#. kHGEs
#: chart2/uiconfig/ui/tp_DataLabel.ui:258
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Right"
msgstr "右"

#. GFkmP
#: chart2/uiconfig/ui/tp_DataLabel.ui:259
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Top right"
msgstr "右上"

#. KFZhx
#: chart2/uiconfig/ui/tp_DataLabel.ui:260
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Inside"
msgstr "内侧"

#. BJm6w
#: chart2/uiconfig/ui/tp_DataLabel.ui:261
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Outside"
msgstr "外侧"

#. XGkMi
#: chart2/uiconfig/ui/tp_DataLabel.ui:262
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Near origin"
msgstr "原点附近"

#. vq2Bf
#: chart2/uiconfig/ui/tp_DataLabel.ui:266
msgctxt "tp_DataLabel|extended_tip|LB_LABEL_PLACEMENT"
msgid "Selects the placement of data labels relative to the objects."
msgstr "选择与对象相关的数据标签的位置。"

#. PNGYD
#: chart2/uiconfig/ui/tp_DataLabel.ui:286
msgctxt "tp_DataLabel|STR_DLG_NUMBERFORMAT_FOR_PERCENTAGE_VALUE"
msgid "Number Format for Percentage Value"
msgstr "百分比值的数字格式"

#. uSnEZ
#: chart2/uiconfig/ui/tp_DataLabel.ui:295
msgctxt "tp_DataLabel|CB_DATA_SERIES_NAME"
msgid "Show data _series name"
msgstr ""

#. 3tWYv
#: chart2/uiconfig/ui/tp_DataLabel.ui:304
msgctxt "tp_DataLabel|extended_tip|CB_DATA_SERIES_NAME"
msgid "Shows the data series name in the label."
msgstr ""

#. 3BZrx
#: chart2/uiconfig/ui/tp_DataLabel.ui:325
msgctxt "tp_DataLabel|label1"
msgid "Text Attributes"
msgstr "文本属性"

#. avLCL
#: chart2/uiconfig/ui/tp_DataLabel.ui:365
msgctxt "tp_DataLabel|extended_tip|CT_DIAL"
msgid "Click in the dial to set the text orientation for the data labels."
msgstr "点击圆盘设置数据标签的文字方向。"

#. eKwUH
#: chart2/uiconfig/ui/tp_DataLabel.ui:386
msgctxt "tp_DataLabel|extended_tip|NF_LABEL_DEGREES"
msgid "Enter the counterclockwise rotation angle for the data labels."
msgstr "输入数据标签逆时针旋转的角度。"

#. VArif
#: chart2/uiconfig/ui/tp_DataLabel.ui:400
msgctxt "tp_DataLabel|FT_LABEL_DEGREES"
msgid "_Degrees"
msgstr "度(_D)"

#. zdP7E
#: chart2/uiconfig/ui/tp_DataLabel.ui:425
msgctxt "tp_DataLabel|FT_LABEL_TEXTDIR"
msgid "Te_xt direction"
msgstr "文字方向(_X)"

#. MYXZo
#: chart2/uiconfig/ui/tp_DataLabel.ui:442
msgctxt "tp_DataLabel|extended_tip|LB_LABEL_TEXTDIR"
msgid "Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled."
msgstr "为使用复杂文字版式 (CTL) 的段落指定文字方向。只有启用了复杂文字版式时，此功能才可用。"

#. PKnKk
#: chart2/uiconfig/ui/tp_DataLabel.ui:465
msgctxt "tp_DataLabel|label2"
msgid "Rotate Text"
msgstr "旋转文字"

#. wBzcx
#: chart2/uiconfig/ui/tp_DataLabel.ui:494
msgctxt "tp_DataLabel|CB_CUSTOM_LEADER_LINES"
msgid "_Connect displaced data labels to data points"
msgstr "将位移了的数据标签与对应数据点连接(_C)"

#. BXobT
#: chart2/uiconfig/ui/tp_DataLabel.ui:502
msgctxt "tp_DataLabel|extended_tip|CB_CUSTOM_LEADER_LINES"
msgid "Draws a line connecting the data labels to the data points"
msgstr "在数据标签与对应数据点间画一条连接线"

#. MBFBB
#: chart2/uiconfig/ui/tp_DataLabel.ui:518
msgctxt "tp_DataLabel|label3"
msgid "Leader Lines"
msgstr "标注线"

#. iDheE
#: chart2/uiconfig/ui/tp_DataLabel.ui:534
msgctxt "tp_DataLabel|extended_tip|tp_DataLabel"
msgid "Opens the Data Labels dialog, which enables you to set the data labels."
msgstr "打开「数据标签」对话框，您可以在其中设置数据标签。"

#. rXE7B
#: chart2/uiconfig/ui/tp_DataPointOption.ui:37
msgctxt "tp_DataPointOption|CB_LEGEND_ENTRY_HIDDEN"
msgid "Hide legend entry"
msgstr "隐藏图例"

#. k2s9H
#: chart2/uiconfig/ui/tp_DataPointOption.ui:45
msgctxt "tp_DataPointOption|extended_tip|CB_LEGEND_ENTRY_HIDDEN"
msgid "Do not show legend entry for the selected data series or data point."
msgstr ""

#. DUQwA
#: chart2/uiconfig/ui/tp_DataPointOption.ui:61
msgctxt "tp_DataPointOption|label1"
msgid "Legend Entry"
msgstr "图例"

#. A2dFx
#: chart2/uiconfig/ui/tp_DataSource.ui:18
msgctxt "tp_DataSource|imageIMB_RANGE_CAT|tooltip_text"
msgid "Select data range"
msgstr "选择数据区域"

#. kEnRN
#: chart2/uiconfig/ui/tp_DataSource.ui:24
msgctxt "tp_DataSource|imageIMB_RANGE_MAIN|tooltip_text"
msgid "Select data range"
msgstr "选择数据区域"

#. 2iNp6
#: chart2/uiconfig/ui/tp_DataSource.ui:73
msgctxt "tp_DataSource|FT_SERIES"
msgid "Data _series:"
msgstr "数据序列(_S):"

#. oFoeg
#: chart2/uiconfig/ui/tp_DataSource.ui:116
msgctxt "tp_DataSource|extended_tip|LB_SERIES"
msgid "Shows a list of all data series in the chart. Click an entry to view and edit that data series. Click Add to insert a new series into the list after the selected entry."
msgstr "显示图表中所有数据序列的列表。点击某个条目可以显示和编辑相应的数据序列。点击「添加」可以在列表中选中的条目之后插入一个新的序列。"

#. rqABh
#: chart2/uiconfig/ui/tp_DataSource.ui:137
msgctxt "tp_DataSource|BTN_ADD"
msgid "_Add"
msgstr "添加(_A)"

#. AExBB
#: chart2/uiconfig/ui/tp_DataSource.ui:145
msgctxt "tp_DataSource|extended_tip|BTN_ADD"
msgid "Adds a new entry below the current entry in the Data Series list. If an entry is selected, the new data series gets the same chart type."
msgstr "在「数据序列」列表的当前条目下面添加一个新的条目。如果某个条目被选中，新的数据序列将使用与之相同的图表类型。"

#. dCyXA
#: chart2/uiconfig/ui/tp_DataSource.ui:163
msgctxt "tp_DataSource|BTN_UP-atkobject"
msgid "Up"
msgstr "向上"

#. GTEK3
#: chart2/uiconfig/ui/tp_DataSource.ui:164
msgctxt "tp_DataSource|extended_tip|BTN_UP"
msgid "Moves up the selected entry in the Data Series list."
msgstr "在「数据序列」列表中上移选中的条目。"

#. 3v9x2
#: chart2/uiconfig/ui/tp_DataSource.ui:175
msgctxt "tp_DataSource|BTN_REMOVE"
msgid "_Remove"
msgstr "移除(_R)"

#. BDDwm
#: chart2/uiconfig/ui/tp_DataSource.ui:183
msgctxt "tp_DataSource|extended_tip|BTN_REMOVE"
msgid "Removes the selected entry from the Data Series list."
msgstr "从「数据序列」列表中删除选中的条目。"

#. MkZNf
#: chart2/uiconfig/ui/tp_DataSource.ui:201
msgctxt "tp_DataSource|BTN_DOWN-atkobject"
msgid "Down"
msgstr "向下"

#. 558EK
#: chart2/uiconfig/ui/tp_DataSource.ui:202
msgctxt "tp_DataSource|extended_tip|BTN_DOWN"
msgid "Moves down the selected entry in the Data Series list."
msgstr "下移在「数据序列」列表中选中的条目。"

#. mC5Ge
#: chart2/uiconfig/ui/tp_DataSource.ui:244
msgctxt "tp_DataSource|FT_ROLE"
msgid "_Data ranges:"
msgstr "数据区域(_D):"

#. ZB6Dv
#: chart2/uiconfig/ui/tp_DataSource.ui:297
msgctxt "tp_DataSource|extended_tip|LB_ROLE"
msgid "Shows all the data ranges used by the data series that is selected in the Data Series list box. Each data range shows the role name and the source range address."
msgstr "显示「数据序列」列表框中选中的数据序列所使用的所有数据区域。每一个数据区域显示作用名和源区域地址。"

#. qRMfs
#: chart2/uiconfig/ui/tp_DataSource.ui:312
msgctxt "tp_DataSource|FT_RANGE"
msgid "Ran_ge for %VALUETYPE"
msgstr "%VALUETYPE 的区域 (_G)"

#. M2BSw
#: chart2/uiconfig/ui/tp_DataSource.ui:338
msgctxt "tp_DataSource|extended_tip|EDT_RANGE"
msgid "Shows the source range address from the second column of the Data Range list box. You can change the range in the text box or by dragging in the document. To minimize this dialog while you select the data range in Calc, click the Select data range button."
msgstr "显示「数据区域」列表框中第二列的源区域地址。您可以在文本框中修改区域或在文档中拖动。要在 Calc 中选择数据区域时最小化此对话框，请点击「选择数据区域」按钮。"

#. CwKet
#: chart2/uiconfig/ui/tp_DataSource.ui:355
msgctxt "tp_DataSource|extended_tip|IMB_RANGE_MAIN"
msgid "Shows the source range address from the second column of the Data Range list box. You can change the range in the text box or by dragging in the document. To minimize this dialog while you select the data range in Calc, click the Select data range button."
msgstr "显示「数据区域」列表框中第二列的源区域地址。您可以在文本框中修改区域或在文档中拖动。要在 Calc 中选择数据区域时最小化此对话框，请点击「选择数据区域」按钮。"

#. FX2CF
#: chart2/uiconfig/ui/tp_DataSource.ui:380
msgctxt "tp_DataSource|FT_CATEGORIES"
msgid "_Categories"
msgstr "类别(_C)"

#. EiwXn
#: chart2/uiconfig/ui/tp_DataSource.ui:394
msgctxt "tp_DataSource|FT_DATALABELS"
msgid "Data _labels"
msgstr "数据标签(_L)"

#. ogTbE
#: chart2/uiconfig/ui/tp_DataSource.ui:425
msgctxt "tp_DataSource|extended_tip|EDT_CATEGORIES"
msgid "Shows the source range address of the categories (the texts you can see on the x-axis of a category chart). For an XY-chart, the text box contains the source range of the data labels which are displayed for the data points. To minimize this dialog while you select the data range in Calc, click the Select data range button."
msgstr "显示类别的源区域地址 (您可以在类别图表的 X 轴上看到的文字)。对于一个 XY 图表，文本框含有为数据点显示的数据标签的源区域。要在 Calc 中选择数据区域时最小化此对话框，请点击「选择数据区域」按钮。"

#. EYFEo
#: chart2/uiconfig/ui/tp_DataSource.ui:442
msgctxt "tp_DataSource|extended_tip|IMB_RANGE_CAT"
msgid "Shows the source range address of the categories (the texts you can see on the x-axis of a category chart). For an XY-chart, the text box contains the source range of the data labels which are displayed for the data points. To minimize this dialog while you select the data range in Calc, click the Select data range button."
msgstr "显示类别的源区域地址 (您可以在类别图表的 X 轴上看到的文字)。对于一个 XY 图表，文本框含有为数据点显示的数据标签的源区域。要在 Calc 中选择数据区域时最小化此对话框，请点击「选择数据区域」按钮。"

#. YwALA
#: chart2/uiconfig/ui/tp_DataSource.ui:479
msgctxt "tp_DataSource|FT_CAPTION_FOR_WIZARD"
msgid "Customize Data Ranges for Individual Data Series"
msgstr "自定义单个数据序列的数据区域"

#. tGqhN
#: chart2/uiconfig/ui/tp_ErrorBars.ui:53
msgctxt "tp_ErrorBars|RB_NONE"
msgid "_None"
msgstr "无(_N)"

#. YVhm9
#: chart2/uiconfig/ui/tp_ErrorBars.ui:64
msgctxt "tp_ErrorBars|extended_tip|RB_NONE"
msgid "Does not show any error bars."
msgstr "不会显示任何错误栏。"

#. Cq44D
#: chart2/uiconfig/ui/tp_ErrorBars.ui:76
msgctxt "tp_ErrorBars|RB_CONST"
msgid "_Constant Value"
msgstr "常数(_C)"

#. Aetuh
#: chart2/uiconfig/ui/tp_ErrorBars.ui:87
msgctxt "tp_ErrorBars|extended_tip|RB_CONST"
msgid "Displays constant values that you specify in the Parameters area."
msgstr "显示您在「参数」区域中指定的常数值。"

#. Njqok
#: chart2/uiconfig/ui/tp_ErrorBars.ui:99
msgctxt "tp_ErrorBars|RB_PERCENT"
msgid "_Percentage"
msgstr "百分比(_P)"

#. kqgrm
#: chart2/uiconfig/ui/tp_ErrorBars.ui:110
msgctxt "tp_ErrorBars|extended_tip|RB_PERCENT"
msgid "Displays a percentage. The display refers to the corresponding data point. Set the percentage in the Parameters area."
msgstr "显示一个百分比。显示的内容对应于相应的数据点。在「参数」区域中设置百分比。"

#. qCQY8
#: chart2/uiconfig/ui/tp_ErrorBars.ui:137
msgctxt "tp_ErrorBars|extended_tip|RB_FUNCTION"
msgid "Select a function to calculate the error bars."
msgstr "选择用于计算误差线的函数。"

#. GnXao
#: chart2/uiconfig/ui/tp_ErrorBars.ui:152
msgctxt "tp_ErrorBars|liststoreFUNCTION"
msgid "Standard Error"
msgstr "标准误差"

#. SQ3rE
#: chart2/uiconfig/ui/tp_ErrorBars.ui:153
msgctxt "tp_ErrorBars|liststoreFUNCTION"
msgid "Standard Deviation"
msgstr "标准偏差"

#. GagXt
#: chart2/uiconfig/ui/tp_ErrorBars.ui:154
msgctxt "tp_ErrorBars|liststoreFUNCTION"
msgid "Variance"
msgstr "方差"

#. Siyxd
#: chart2/uiconfig/ui/tp_ErrorBars.ui:155
msgctxt "tp_ErrorBars|liststoreFUNCTION"
msgid "Error Margin"
msgstr "误差范围"

#. j6oTg
#: chart2/uiconfig/ui/tp_ErrorBars.ui:159
msgctxt "tp_ErrorBars|extended_tip|LB_FUNCTION"
msgid "Select a function to calculate the error bars."
msgstr "选择用于计算误差线的函数。"

#. AbhAQ
#: chart2/uiconfig/ui/tp_ErrorBars.ui:178
msgctxt "tp_ErrorBars|RB_RANGE"
msgid "Cell _Range"
msgstr "单元格区域(_R)"

#. x3uW3
#: chart2/uiconfig/ui/tp_ErrorBars.ui:189
msgctxt "tp_ErrorBars|extended_tip|RB_RANGE"
msgid "Click Cell Range and then specify a cell range from which to take the positive and negative error bar values."
msgstr "点击「单元格区域」，之后指定一个从中获得正、负误差线值的单元格区域。"

#. 9Y8Vo
#: chart2/uiconfig/ui/tp_ErrorBars.ui:205
msgctxt "tp_ErrorBars|label1"
msgid "Error Category"
msgstr "误差分类"

#. q8qXd
#: chart2/uiconfig/ui/tp_ErrorBars.ui:236
msgctxt "tp_ErrorBars|RB_BOTH"
msgid "Positive _and Negative"
msgstr "正值和负值(_A)"

#. LDszs
#: chart2/uiconfig/ui/tp_ErrorBars.ui:247
msgctxt "tp_ErrorBars|extended_tip|RB_BOTH"
msgid "Shows positive and negative error bars."
msgstr "显示正、负误差线。"

#. 6F78D
#: chart2/uiconfig/ui/tp_ErrorBars.ui:258
msgctxt "tp_ErrorBars|RB_POSITIVE"
msgid "Pos_itive"
msgstr "正值(_I)"

#. oSnnp
#: chart2/uiconfig/ui/tp_ErrorBars.ui:269
msgctxt "tp_ErrorBars|extended_tip|RB_POSITIVE"
msgid "Shows only positive error bars."
msgstr "只显示正误差线。"

#. jdFbj
#: chart2/uiconfig/ui/tp_ErrorBars.ui:280
msgctxt "tp_ErrorBars|RB_NEGATIVE"
msgid "Ne_gative"
msgstr "负值(_P)"

#. DvqJN
#: chart2/uiconfig/ui/tp_ErrorBars.ui:291
msgctxt "tp_ErrorBars|extended_tip|RB_NEGATIVE"
msgid "Shows only negative error bars."
msgstr "只显示负误差线。"

#. D4Aou
#: chart2/uiconfig/ui/tp_ErrorBars.ui:339
msgctxt "tp_ErrorBars|label2"
msgid "Error Indicator"
msgstr "误差指示器"

#. haTNd
#: chart2/uiconfig/ui/tp_ErrorBars.ui:383
msgctxt "tp_ErrorBars|FT_POSITIVE"
msgid "P_ositive (+)"
msgstr "正值(+) (_O)"

#. 7bDeP
#: chart2/uiconfig/ui/tp_ErrorBars.ui:402
msgctxt "tp_ErrorBars|extended_tip|MF_POSITIVE"
msgid "Enter the value to add to the displayed value as the positive error value."
msgstr "输入要增加到显示值作为正误差值的数值。"

#. D5XCD
#: chart2/uiconfig/ui/tp_ErrorBars.ui:421
msgctxt "tp_ErrorBars|extended_tip|ED_RANGE_POSITIVE"
msgid "Enter the address range from where to get the positive error values. Use the Shrink button to select the range from a sheet."
msgstr "输入地址范围，从该地址范围可以得到正误差值。使用「缩小」按钮从工作表中选择范围。"

#. rGBRC
#: chart2/uiconfig/ui/tp_ErrorBars.ui:436
msgctxt "tp_ErrorBars|IB_RANGE_POSITIVE|tooltip_text"
msgid "Select data range"
msgstr "选择数据区域"

#. QYRko
#: chart2/uiconfig/ui/tp_ErrorBars.ui:440
msgctxt "tp_ErrorBars|extended_tip|IB_RANGE_POSITIVE"
msgid "Click a button to shrink the dialog, then use the mouse to select the cell range in the spreadsheet. Click the button again to restore the dialog to full size."
msgstr "点击按钮缩小对话框，然后在电子表格中使用鼠标选择单元格区域。再次点击该按钮以将对话框还原至完整大小。"

#. C5ZdQ
#: chart2/uiconfig/ui/tp_ErrorBars.ui:466
msgctxt "tp_ErrorBars|FT_NEGATIVE"
msgid "_Negative (-)"
msgstr "负值(-) (_N)"

#. TAAD2
#: chart2/uiconfig/ui/tp_ErrorBars.ui:485
msgctxt "tp_ErrorBars|extended_tip|MF_NEGATIVE"
msgid "Enter the value to subtract from the displayed value as the negative error value."
msgstr "输入要从显示值中减去的作为负误差值的数值。"

#. S8d3Y
#: chart2/uiconfig/ui/tp_ErrorBars.ui:503
msgctxt "tp_ErrorBars|extended_tip|ED_RANGE_NEGATIVE"
msgid "Enter the address range from where to get the negative error values. Use the Shrink button to select the range from a sheet."
msgstr "输入地址范围，从该地址范围可以得到负误差值。使用「缩小」按钮从工作表中选择范围。"

#. EVG7h
#: chart2/uiconfig/ui/tp_ErrorBars.ui:518
msgctxt "tp_ErrorBars|IB_RANGE_NEGATIVE|tooltip_text"
msgid "Select data range"
msgstr "选择数据区域"

#. oEACZ
#: chart2/uiconfig/ui/tp_ErrorBars.ui:522
msgctxt "tp_ErrorBars|extended_tip|IB_RANGE_NEGATIVE"
msgid "Click a button to shrink the dialog, then use the mouse to select the cell range in the spreadsheet. Click the button again to restore the dialog to full size."
msgstr "点击按钮缩小对话框，然后在电子表格中使用鼠标选择单元格区域。再次点击该按钮以将对话框还原至完整大小。"

#. wdsax
#: chart2/uiconfig/ui/tp_ErrorBars.ui:541
msgctxt "tp_ErrorBars|CB_SYN_POS_NEG"
msgid "Same value for both"
msgstr "两个值相同"

#. DvgLw
#: chart2/uiconfig/ui/tp_ErrorBars.ui:549
msgctxt "tp_ErrorBars|extended_tip|CB_SYN_POS_NEG"
msgid "Enable to use the positive error values also as negative error values. You can only change the value of the \"Positive (+)\" box. That value gets copied to the \"Negative (-)\" box automatically."
msgstr "允许将正误差值同时作为负误差值。您只能更改「正值 (+)」框的值。该值会被自动复制到「负值 (-)」框。"

#. BEj3C
#: chart2/uiconfig/ui/tp_ErrorBars.ui:565
msgctxt "tp_ErrorBars|label3"
msgid "Parameters"
msgstr "参数"

#. XxRKD
#: chart2/uiconfig/ui/tp_ErrorBars.ui:582
msgctxt "tp_ErrorBars|STR_DATA_SELECT_RANGE_FOR_POSITIVE_ERRORBARS"
msgid "Select Range for Positive Error Bars"
msgstr "为正误差线选择区域"

#. FXjsk
#: chart2/uiconfig/ui/tp_ErrorBars.ui:593
msgctxt "tp_ErrorBars|STR_DATA_SELECT_RANGE_FOR_NEGATIVE_ERRORBARS"
msgid "Select Range for Negative Error Bars"
msgstr "为负误差线选择区域"

#. AAfgS
#: chart2/uiconfig/ui/tp_ErrorBars.ui:604
msgctxt "tp_ErrorBars|STR_CONTROLTEXT_ERROR_BARS_FROM_DATA"
msgid "From Data Table"
msgstr "从数据表"

#. C9QvS
#: chart2/uiconfig/ui/tp_LegendPosition.ui:27
msgctxt "tp_LegendPosition|left"
msgid "_Left"
msgstr "左(_L)"

#. 98N4N
#: chart2/uiconfig/ui/tp_LegendPosition.ui:35
msgctxt "tp_LegendPosition|extended_tip|left"
msgid "Positions the legend at the left of the chart."
msgstr "将图例定位于图表的左侧。"

#. WGGa8
#: chart2/uiconfig/ui/tp_LegendPosition.ui:46
msgctxt "tp_LegendPosition|right"
msgid "_Right"
msgstr "右(_R)"

#. BgNsc
#: chart2/uiconfig/ui/tp_LegendPosition.ui:55
msgctxt "tp_LegendPosition|extended_tip|right"
msgid "Positions the legend at the right of the chart."
msgstr "将图例定位于图表的右侧。"

#. aURZs
#: chart2/uiconfig/ui/tp_LegendPosition.ui:66
msgctxt "tp_LegendPosition|top"
msgid "_Top"
msgstr "顶部(_T)"

#. GppCU
#: chart2/uiconfig/ui/tp_LegendPosition.ui:75
msgctxt "tp_LegendPosition|extended_tip|top"
msgid "Positions the legend at the top of the chart."
msgstr "将图例定位于图表的顶部。"

#. 9WgFV
#: chart2/uiconfig/ui/tp_LegendPosition.ui:86
msgctxt "tp_LegendPosition|bottom"
msgid "_Bottom"
msgstr "底部(_B)"

#. dvBdX
#: chart2/uiconfig/ui/tp_LegendPosition.ui:95
msgctxt "tp_LegendPosition|extended_tip|bottom"
msgid "Positions the legend at the bottom of the chart."
msgstr "将图例定位于图表的底部。"

#. z84pQ
#: chart2/uiconfig/ui/tp_LegendPosition.ui:110
msgctxt "tp_LegendPosition|TXT_POSITION"
msgid "Position"
msgstr "位置"

#. 6teoB
#: chart2/uiconfig/ui/tp_LegendPosition.ui:141
msgctxt "tp_LegendPosition|FT_LEGEND_TEXTDIR"
msgid "Te_xt direction"
msgstr "文字方向(_X)"

#. PSPoQ
#: chart2/uiconfig/ui/tp_LegendPosition.ui:157
msgctxt "tp_LegendPosition|extended_tip|LB_LEGEND_TEXTDIR"
msgid "Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled."
msgstr "为使用复杂文字版式 (CTL) 的段落指定文字方向。只有启用了复杂文字版式时，此功能才可用。"

#. sUDkC
#: chart2/uiconfig/ui/tp_LegendPosition.ui:173
msgctxt "tp_LegendPosition|TXT_ORIENTATION"
msgid "Text Orientation"
msgstr "文字方向"

#. VsH8A
#: chart2/uiconfig/ui/tp_LegendPosition.ui:202
msgctxt "tp_LegendPosition|CB_NO_OVERLAY"
msgid "Show the legend without overlapping the chart"
msgstr "显示图例，但不覆盖图表"

#. yi8AX
#: chart2/uiconfig/ui/tp_LegendPosition.ui:210
msgctxt "tp_LegendPosition|extended_tip|CB_NO_OVERLAY"
msgid "Specifies whether the legend should overlap the chart."
msgstr ""

#. 82yue
#: chart2/uiconfig/ui/tp_LegendPosition.ui:226
msgctxt "tp_LegendPosition|TXT_OVERLAY"
msgid "Overlay"
msgstr "覆盖"

#. 8783D
#: chart2/uiconfig/ui/tp_PolarOptions.ui:24
msgctxt "tp_PolarOptions|CB_CLOCKWISE"
msgid "_Clockwise direction"
msgstr "顺时针方向(_C)"

#. GikR7
#: chart2/uiconfig/ui/tp_PolarOptions.ui:34
msgctxt "tp_PolarOptions|extended_tip|CB_CLOCKWISE"
msgid "The default direction in which the pieces of a pie chart are ordered is counterclockwise. Enable the Clockwise direction checkbox to draw the pieces in opposite direction."
msgstr "在饼图图表中的默认的方向是逆时针方向。启用「顺时针方向」复选框来绘制反方向的图表。"

#. ATHCu
#: chart2/uiconfig/ui/tp_PolarOptions.ui:43
msgctxt "tp_PolarOptions|label1"
msgid "Orientation"
msgstr "方向"

#. mEJCE
#: chart2/uiconfig/ui/tp_PolarOptions.ui:79
msgctxt "tp_PolarOptions|extended_tip|CT_ANGLE_DIAL"
msgid "Drag the small dot along the circle or click any position on the circle to set the starting angle of a pie or donut chart. The starting angle is the mathematical angle position where the first piece is drawn. The value of 90 degrees draws the first piece at the 12 o'clock position. A value of 0 degrees starts at the 3 o'clock position."
msgstr "拖动圆周上的小圆点或者点击圆周上的任意位置为饼图和圆环图设置起始角度。起始角度是绘制第一片的精确角度位置。90 度在 12 点的位置开始绘制第一片。0 度是在 3 点位置开始绘制。"

#. EEVTg
#: chart2/uiconfig/ui/tp_PolarOptions.ui:99
msgctxt "tp_PolarOptions|extended_tip|NF_STARTING_ANGLE"
msgid "Enter the starting angle between 0 and 359 degrees. You can also click the arrows to change the displayed value."
msgstr "输入 0 至 359 度之间的起始角度。您也可以点击箭头来更改显示值。"

#. prqEa
#: chart2/uiconfig/ui/tp_PolarOptions.ui:113
msgctxt "tp_PolarOptions|FT_ROTATION_DEGREES"
msgid "_Degrees"
msgstr "度(_D)"

#. iHLKn
#: chart2/uiconfig/ui/tp_PolarOptions.ui:130
msgctxt "tp_PolarOptions|label2"
msgid "Starting Angle"
msgstr "起始角度"

#. 5zEew
#: chart2/uiconfig/ui/tp_PolarOptions.ui:152
msgctxt "tp_PolarOptions|CB_INCLUDE_HIDDEN_CELLS_POLAR"
msgid "Include _values from hidden cells"
msgstr "包含隐藏单元格的值(_V)"

#. F5FTp
#: chart2/uiconfig/ui/tp_PolarOptions.ui:166
msgctxt "tp_PolarOptions|label3"
msgid "Plot Options"
msgstr "绘图选项"

#. tHATu
#: chart2/uiconfig/ui/tp_RangeChooser.ui:8
msgctxt "tp_RangeChooser|imageIB_RANGE|tooltip_text"
msgid "Select data range"
msgstr "选择数据区域"

#. 4zh42
#: chart2/uiconfig/ui/tp_RangeChooser.ui:28
msgctxt "tp_RangeChooser|FT_CAPTION_FOR_WIZARD"
msgid "Choose a Data Range"
msgstr "选择数据区域"

#. g2XVd
#: chart2/uiconfig/ui/tp_RangeChooser.ui:50
msgctxt "tp_RangeChooser|FT_RANGE"
msgid "_Data range:"
msgstr "数据区域(_D):"

#. WKLi7
#: chart2/uiconfig/ui/tp_RangeChooser.ui:69
msgctxt "tp_RangeChooser|extended_tip|ED_RANGE"
msgid "Enter the data range that you want to include in your chart. To minimize this dialog while you select the data range in Calc, click the Select data range button."
msgstr "输入想要包含在图表中的数据区域。要在 Calc 中选择数据区域时最小化此对话框，请点击「选择数据区域」按钮。"

#. FyVoD
#: chart2/uiconfig/ui/tp_RangeChooser.ui:83
msgctxt "tp_RangeChooser|IB_RANGE|tooltip_text"
msgid "Select data range"
msgstr "选择数据区域"

#. FVivY
#: chart2/uiconfig/ui/tp_RangeChooser.ui:87
msgctxt "tp_RangeChooser|extended_tip|IB_RANGE"
msgid "Enter the data range that you want to include in your chart. To minimize this dialog while you select the data range in Calc, click the Select data range button."
msgstr "输入想要包含在图表中的数据区域。要在 Calc 中选择数据区域时最小化此对话框，请点击「选择数据区域」按钮。"

#. RGGHE
#: chart2/uiconfig/ui/tp_RangeChooser.ui:104
msgctxt "tp_RangeChooser|RB_DATAROWS"
msgid "Data series in _rows"
msgstr "行中包含数据序列(_R)"

#. w6DuB
#: chart2/uiconfig/ui/tp_RangeChooser.ui:113
msgctxt "tp_RangeChooser|extended_tip|RB_DATAROWS"
msgid "Data series get their data from consecutive rows in the selected range. For scatter charts, the first data series will contain x-values for all series. All other data series are used as y-values, one for each series."
msgstr "数据序列从选中区域的连续行中得到数据。对于散点图表，第一个数据序列将包含所有序列的 x 值。所有其他数据序列被用作每一个序列的 y 值。"

#. wSDqF
#: chart2/uiconfig/ui/tp_RangeChooser.ui:124
msgctxt "tp_RangeChooser|RB_DATACOLS"
msgid "Data series in _columns"
msgstr "列中包含数据序列(_C)"

#. RfFZF
#: chart2/uiconfig/ui/tp_RangeChooser.ui:133
msgctxt "tp_RangeChooser|extended_tip|RB_DATACOLS"
msgid "Data series get their data from consecutive columns in the selected range. For scatter charts, the first data column will contain x-values for all series. All other data columns are used as y-values, one for each series."
msgstr "数据序列从选中区域的连续列中得到数据。对于散点图表，第一个数据列将包含所有序列的 x 值。所有其他数据列被用作每一个序列的 y 值。"

#. CExLY
#: chart2/uiconfig/ui/tp_RangeChooser.ui:144
msgctxt "tp_RangeChooser|CB_FIRST_ROW_ASLABELS"
msgid "_First row as label"
msgstr "将第一行作为标签(_F)"

#. HviBv
#: chart2/uiconfig/ui/tp_RangeChooser.ui:152
msgctxt "tp_RangeChooser|extended_tip|CB_FIRST_ROW_ASLABELS"
msgid "For data series in columns: The first row in the range is used as names for data series. For data series in rows: The first row in the range is used as categories. The remaining rows comprise the data series. If this check box is not selected, all rows are data series."
msgstr "对于列中的数据序列: 区域中的第一行被用作数据序列的名称。对于行中的数据序列: 区域中的第一行被用作类别。剩下的行构成数据序列。如果没有选择此复选框，所有的行都将作为数据序列。"

#. ER2D7
#: chart2/uiconfig/ui/tp_RangeChooser.ui:163
msgctxt "tp_RangeChooser|CB_FIRST_COLUMN_ASLABELS"
msgid "F_irst column as label"
msgstr "将第一列作为标签(_I)"

#. tTAhH
#: chart2/uiconfig/ui/tp_RangeChooser.ui:171
msgctxt "tp_RangeChooser|extended_tip|CB_FIRST_COLUMN_ASLABELS"
msgid "For data series in columns: The first column in the range is used as names for data series. For data series in rows: The first column in the range is used as categories. The remaining columns comprise the data columns. If this check box is not selected, all columns are data columns."
msgstr "对于列中的数据序列: 区域中的第一列被用作数据序列的名称。对于行中的数据序列: 区域中的第一列被用作类别。剩下的列构成数据列。如果没有选择此复选框，所有的列都将作为数据列。"

#. k9TMD
#: chart2/uiconfig/ui/tp_RangeChooser.ui:192
msgctxt "tp_RangeChooser|CB_TIME_BASED"
msgid "Time based charting"
msgstr "基于时间的图表"

#. iuxE5
#: chart2/uiconfig/ui/tp_RangeChooser.ui:243
msgctxt "tp_RangeChooser|label1"
msgid "Start Table Index"
msgstr "开始表格索引"

#. dnmDQ
#: chart2/uiconfig/ui/tp_RangeChooser.ui:256
msgctxt "tp_RangeChooser|label2"
msgid "End Table Index"
msgstr "结束表格索引"

#. FcYeD
#: chart2/uiconfig/ui/tp_RangeChooser.ui:274
msgctxt "tp_RangeChooser|STR_PAGE_DATA_RANGE"
msgid "Data Range"
msgstr "数据区域"

#. YfF4A
#: chart2/uiconfig/ui/tp_Scale.ui:55
msgctxt "tp_Scale|CBX_REVERSE"
msgid "_Reverse direction"
msgstr "反转方向(_R)"

#. DNJFK
#: chart2/uiconfig/ui/tp_Scale.ui:63
msgctxt "tp_Scale|extended_tip|CBX_REVERSE"
msgid "Defines where the lower and where the higher values are displayed at the axis. The unchecked state is the mathematical direction."
msgstr "定义较低和较高值显示在坐标轴的什么位置。未选中的状态是数学方向。"

#. qBbBL
#: chart2/uiconfig/ui/tp_Scale.ui:75
msgctxt "tp_Scale|CBX_LOGARITHM"
msgid "_Logarithmic scale"
msgstr "对数刻度(_L)"

#. 3wDMa
#: chart2/uiconfig/ui/tp_Scale.ui:83
msgctxt "tp_Scale|extended_tip|CBX_LOGARITHM"
msgid "Specifies that you want the axis to be subdivided logarithmically."
msgstr "指定以对数方式细分此轴。"

#. 2B5CL
#: chart2/uiconfig/ui/tp_Scale.ui:102
msgctxt "tp_Scale|TXT_AXIS_TYPE"
msgid "T_ype"
msgstr "类型(_T)"

#. D6Bre
#: chart2/uiconfig/ui/tp_Scale.ui:118
msgctxt "tp_Scale|LB_AXIS_TYPE"
msgid "Automatic"
msgstr "自动"

#. TCiZu
#: chart2/uiconfig/ui/tp_Scale.ui:119
msgctxt "tp_Scale|LB_AXIS_TYPE"
msgid "Text"
msgstr "文本"

#. vAAUB
#: chart2/uiconfig/ui/tp_Scale.ui:120
msgctxt "tp_Scale|LB_AXIS_TYPE"
msgid "Date"
msgstr "日期"

#. 8YZhv
#: chart2/uiconfig/ui/tp_Scale.ui:124
msgctxt "tp_Scale|extended_tip|LB_AXIS_TYPE"
msgid "For some types of axes, you can select to format an axis as text or date, or to detect the type automatically."
msgstr "对一些类型的轴，您可以选择将一轴格式化为文本或日期，或自动侦测类型。"

#. Vf7vB
#: chart2/uiconfig/ui/tp_Scale.ui:159
msgctxt "tp_Scale|TXT_MIN"
msgid "_Minimum"
msgstr "最小(_M)"

#. XUKzj
#: chart2/uiconfig/ui/tp_Scale.ui:173
msgctxt "tp_Scale|TXT_MAX"
msgid "Ma_ximum"
msgstr "最大(_X)"

#. 4jRuB
#: chart2/uiconfig/ui/tp_Scale.ui:185
msgctxt "tp_Scale|CBX_AUTO_MIN"
msgid "_Automatic"
msgstr "自动(_A)"

#. Bx5Co
#: chart2/uiconfig/ui/tp_Scale.ui:199
msgctxt "tp_Scale|CBX_AUTO_MAX"
msgid "A_utomatic"
msgstr "自动(_U)"

#. 2Kb67
#: chart2/uiconfig/ui/tp_Scale.ui:221
msgctxt "tp_Scale|extended_tip|EDT_MIN"
msgid "Defines the minimum value for the beginning of the axis."
msgstr "定义轴起点的最小值。"

#. AvhE9
#: chart2/uiconfig/ui/tp_Scale.ui:240
msgctxt "tp_Scale|extended_tip|EDT_MAX"
msgid "Defines the maximum value for the end of the axis."
msgstr "定义轴终点的最大值。"

#. TsHtd
#: chart2/uiconfig/ui/tp_Scale.ui:265
msgctxt "tp_Scale|TXT_TIME_RESOLUTION"
msgid "R_esolution"
msgstr "解析度(_E)"

#. yyPFB
#: chart2/uiconfig/ui/tp_Scale.ui:281 chart2/uiconfig/ui/tp_Scale.ui:373
#: chart2/uiconfig/ui/tp_Scale.ui:515
msgctxt "tp_Scale|liststoreDATE"
msgid "Days"
msgstr "天"

#. 8xKtE
#: chart2/uiconfig/ui/tp_Scale.ui:282 chart2/uiconfig/ui/tp_Scale.ui:374
#: chart2/uiconfig/ui/tp_Scale.ui:516
msgctxt "tp_Scale|liststoreDATE"
msgid "Months"
msgstr "月"

#. WRUy8
#: chart2/uiconfig/ui/tp_Scale.ui:283 chart2/uiconfig/ui/tp_Scale.ui:375
#: chart2/uiconfig/ui/tp_Scale.ui:517
msgctxt "tp_Scale|liststoreDATE"
msgid "Years"
msgstr "年"

#. WUANc
#: chart2/uiconfig/ui/tp_Scale.ui:287
msgctxt "tp_Scale|extended_tip|LB_TIME_RESOLUTION"
msgid "Resolution can be set to show days, months, or years as interval steps."
msgstr "可以设置分辨率以天、月或年作为步进间隔显示。"

#. ezN7c
#: chart2/uiconfig/ui/tp_Scale.ui:299
msgctxt "tp_Scale|CBX_AUTO_TIME_RESOLUTION"
msgid "Automat_ic"
msgstr "自动(_I)"

#. DbJt9
#: chart2/uiconfig/ui/tp_Scale.ui:328
msgctxt "tp_Scale|TXT_STEP_MAIN"
msgid "Ma_jor interval"
msgstr "主间隔(_J)"

#. AtZ6D
#: chart2/uiconfig/ui/tp_Scale.ui:358
msgctxt "tp_Scale|extended_tip|MT_MAIN_DATE_STEP"
msgid "Major interval can be set to show a certain number of days, months, or years."
msgstr "主间隔可设置显示特定数目的天、月或年。"

#. BD5BE
#: chart2/uiconfig/ui/tp_Scale.ui:379
msgctxt "tp_Scale|extended_tip|LB_MAIN_TIME_UNIT"
msgid "Major interval can be set to show a certain number of days, months, or years."
msgstr "主间隔可设置显示特定数目的天、月或年。"

#. a2Gjv
#: chart2/uiconfig/ui/tp_Scale.ui:406
msgctxt "tp_Scale|extended_tip|EDT_STEP_MAIN"
msgid "Defines the interval for the main division of the axes."
msgstr "定义轴主分隔点的间隔。"

#. UMEd3
#: chart2/uiconfig/ui/tp_Scale.ui:425
msgctxt "tp_Scale|CBX_AUTO_STEP_MAIN"
msgid "Au_tomatic"
msgstr "自动(_T)"

#. Pv5GU
#: chart2/uiconfig/ui/tp_Scale.ui:459
msgctxt "tp_Scale|TXT_STEP_HELP"
msgid "Minor inter_val"
msgstr "次间隔(_V)"

#. WMGqg
#: chart2/uiconfig/ui/tp_Scale.ui:473
msgctxt "tp_Scale|TXT_STEP_HELP_COUNT"
msgid "Minor inter_val count"
msgstr "次间隔计数(_V)"

#. c9m8j
#: chart2/uiconfig/ui/tp_Scale.ui:500
msgctxt "tp_Scale|extended_tip|MT_STEPHELP"
msgid "Defines the interval for the subdivision of the axes."
msgstr "定义轴细分线的间隔。"

#. snFL6
#: chart2/uiconfig/ui/tp_Scale.ui:521
msgctxt "tp_Scale|extended_tip|LB_HELP_TIME_UNIT"
msgid "Minor interval can be set to show a certain number of days, months, or years."
msgstr "次间隔可设置显示特定数目的天、月或年。"

#. X8FAK
#: chart2/uiconfig/ui/tp_Scale.ui:533
msgctxt "tp_Scale|CBX_AUTO_STEP_HELP"
msgid "Aut_omatic"
msgstr "自动(_O)"

#. GAKPN
#: chart2/uiconfig/ui/tp_Scale.ui:562
msgctxt "tp_Scale|TXT_ORIGIN"
msgid "Re_ference value"
msgstr "引用值(_F)"

#. HbRqw
#: chart2/uiconfig/ui/tp_Scale.ui:582
msgctxt "tp_Scale|extended_tip|EDT_ORIGIN"
msgid "Specifies at which position to display the values along the axis."
msgstr "指定沿此轴显示值的位置。"

#. Dj9GB
#: chart2/uiconfig/ui/tp_Scale.ui:594
msgctxt "tp_Scale|CBX_AUTO_ORIGIN"
msgid "Automat_ic"
msgstr "自动(_I)"

#. Z35M3
#: chart2/uiconfig/ui/tp_Scale.ui:602
msgctxt "tp_Scale|extended_tip|CBX_AUTO_ORIGIN"
msgid "You must first deselect the Automatic option in order to modify the values."
msgstr "您必须首先取消选择「自动」选项以修改值。"

#. wqR5C
#: chart2/uiconfig/ui/tp_Scale.ui:625
msgctxt "tp_Scale|FL_SCALE"
msgid "Scale"
msgstr "刻度"

#. YK66G
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:38
msgctxt "tp_SeriesToAxis|RBT_OPT_AXIS_1"
msgid "Primary Y axis"
msgstr "主Y轴"

#. ApXPx
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:47
msgctxt "tp_SeriesToAxis|extended_tip|RBT_OPT_AXIS_1"
msgid "This option is active as default. All data series are aligned to the primary Y axis."
msgstr "此选项在默认情况下为激活状态。所有数据序列均与主 Y 轴对齐。"

#. aZ7G8
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:59
msgctxt "tp_SeriesToAxis|RBT_OPT_AXIS_2"
msgid "Secondary Y axis"
msgstr "次Y轴"

#. nTQUy
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:69
msgctxt "tp_SeriesToAxis|extended_tip|RBT_OPT_AXIS_2"
msgid "Changes the scaling of the Y axis. This axis is only visible when at least one data series is assigned to it and the axis view is active."
msgstr "修改 Y 轴的显示比例。仅当为此轴指定了一个数据序列且轴视图处于激活状态时，此轴才可见。"

#. hV3cT
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:85
msgctxt "tp_SeriesToAxis|label1"
msgid "Align Data Series to"
msgstr "数据序列对齐到"

#. GAF6S
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:124
msgctxt "tp_SeriesToAxis|FT_GAP"
msgid "_Spacing"
msgstr "间距(_S)"

#. 27wWb
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:137
msgctxt "tp_SeriesToAxis|FT_OVERLAP"
msgid "_Overlap"
msgstr "重叠(_O)"

#. NKaBT
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:154
msgctxt "tp_SeriesToAxis|extended_tip|MT_GAP"
msgid "Defines the spacing between the columns in percent."
msgstr "定义列间距 (以百分比表示)。"

#. 8E3zD
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:171
msgctxt "tp_SeriesToAxis|extended_tip|MT_OVERLAP"
msgid "Defines the necessary settings for overlapping data series."
msgstr "对重叠数据序列进行必要的设置。"

#. uV5Dn
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:189
msgctxt "tp_SeriesToAxis|CB_BARS_SIDE_BY_SIDE"
msgid "Show _bars side by side"
msgstr "并排显示柱或条(_B)"

#. U5ruY
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:198
msgctxt "tp_SeriesToAxis|extended_tip|CB_BARS_SIDE_BY_SIDE"
msgid "The bars from different data series are shown as if they were attached only to one axis."
msgstr "来自不同数据序列的条形显示为附属于同一个轴。"

#. b7cbo
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:210
msgctxt "tp_SeriesToAxis|CB_CONNECTOR"
msgid "Connection lines"
msgstr "连接线"

#. 42zFb
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:219
msgctxt "tp_SeriesToAxis|extended_tip|CB_CONNECTOR"
msgid "For \"stacked\" and \"percent\" column (vertical bar) charts, mark this check box to connect the column layers that belong together with lines."
msgstr "对于「堆叠型」和「百分比」柱形 (垂直条) 图，选中此复选框将同属一起的柱形层和线条关联起来。"

#. VHcU3
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:235
msgctxt "tp_SeriesToAxis|label2"
msgid "Settings"
msgstr "设置"

#. zaB5V
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:273
msgctxt "tp_SeriesToAxis|FT_MISSING_VALUES"
msgid "Plot missing values"
msgstr "图表缺失值"

#. fqYSM
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:283
msgctxt "tp_SeriesToAxis|RB_DONT_PAINT"
msgid "_Leave gap"
msgstr "保留间隙(_L)"

#. CFmcS
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:292
msgctxt "tp_SeriesToAxis|extended_tip|RB_DONT_PAINT"
msgid "For a missing value, no data will be shown. This is the default for chart types Column, Bar, Line, Net."
msgstr "对于缺失值，将没有数据显示。对柱形图、条形图、折线图、网状图，这是默认选项。"

#. ZvtoD
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:303
msgctxt "tp_SeriesToAxis|RB_ASSUME_ZERO"
msgid "_Assume zero"
msgstr "假设为零(_A)"

#. y6EGH
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:313
msgctxt "tp_SeriesToAxis|extended_tip|RB_ASSUME_ZERO"
msgid "For a missing value, the y-value will be shown as zero. This is the default for chart type Area."
msgstr "对于缺失值，y 值将显示为零。对面积图，这是默认选项。"

#. 8rLB4
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:324
msgctxt "tp_SeriesToAxis|RB_CONTINUE_LINE"
msgid "_Continue line"
msgstr "继续连线(_C)"

#. 2HArG
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:334
msgctxt "tp_SeriesToAxis|extended_tip|RB_CONTINUE_LINE"
msgid "For a missing value, the interpolation from the neighbor values will be shown. This is the default for chart type XY."
msgstr "对于缺失值，将显示根据邻居数值获得的插值。对于XY散点图，这是默认选项。"

#. Nw9LX
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:358
msgctxt "tp_SeriesToAxis|CB_INCLUDE_HIDDEN_CELLS"
msgid "Include _values from hidden cells"
msgstr "包含隐藏的单元格的值(_V)"

#. vEDHo
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:367
msgctxt "tp_SeriesToAxis|extended_tip|CB_INCLUDE_HIDDEN_CELLS"
msgid "Check to also show values of currently hidden cells within the source cell range."
msgstr "选中该选项，将也显示源单元格区域中当前隐藏单元格中的值。"

#. LvZ8x
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:383
msgctxt "tp_SeriesToAxis|label3"
msgid "Plot Options"
msgstr "绘图选项"

#. gRgPX
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:412
msgctxt "tp_SeriesToAxis|CB_LEGEND_ENTRY_HIDDEN"
msgid "Hide legend entry"
msgstr "隐藏图例项目"

#. GFmDA
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:420
msgctxt "tp_SeriesToAxis|extended_tip|CB_LEGEND_ENTRY_HIDDEN"
msgid "Do not show legend entry for the selected data series or data point."
msgstr ""

#. q8CTC
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:436
msgctxt "tp_SeriesToAxis|label4"
msgid "Legend Entry"
msgstr "图例项目"

#. FsWAE
#: chart2/uiconfig/ui/tp_Trendline.ui:62
msgctxt "tp_Trendline|linear"
msgid "_Linear"
msgstr "线性(_L)"

#. jir3B
#: chart2/uiconfig/ui/tp_Trendline.ui:71
msgctxt "tp_Trendline|extended_tip|linear"
msgid "A linear trend line is shown."
msgstr "显示线性趋势线。"

#. u3nKx
#: chart2/uiconfig/ui/tp_Trendline.ui:82
msgctxt "tp_Trendline|logarithmic"
msgid "L_ogarithmic"
msgstr "对数(_O)"

#. AZT5a
#: chart2/uiconfig/ui/tp_Trendline.ui:92
msgctxt "tp_Trendline|extended_tip|logarithmic"
msgid "A logarithmic trend line is shown."
msgstr "显示对数趋势线。"

#. fPNok
#: chart2/uiconfig/ui/tp_Trendline.ui:103
msgctxt "tp_Trendline|exponential"
msgid "_Exponential"
msgstr "指数(_E)"

#. gufBS
#: chart2/uiconfig/ui/tp_Trendline.ui:113
msgctxt "tp_Trendline|extended_tip|exponential"
msgid "An exponential trend line is shown."
msgstr "显示指数趋势线。"

#. a6FDp
#: chart2/uiconfig/ui/tp_Trendline.ui:124
msgctxt "tp_Trendline|power"
msgid "Po_wer"
msgstr "指数(_W)"

#. sU36A
#: chart2/uiconfig/ui/tp_Trendline.ui:134
msgctxt "tp_Trendline|extended_tip|power"
msgid "A power trend line is shown."
msgstr "显示幂回归线。"

#. QCeGG
#: chart2/uiconfig/ui/tp_Trendline.ui:145
msgctxt "tp_Trendline|polynomial"
msgid "_Polynomial"
msgstr "多项式(_P)"

#. f9EeD
#: chart2/uiconfig/ui/tp_Trendline.ui:155
msgctxt "tp_Trendline|extended_tip|polynomial"
msgid "A polynomial trend line is shown with a given degree."
msgstr "以指定角度显示多项式趋势线。"

#. BkiE2
#: chart2/uiconfig/ui/tp_Trendline.ui:166
msgctxt "tp_Trendline|movingAverage"
msgid "_Moving Average"
msgstr "移动平均(_M)"

#. F5WMz
#: chart2/uiconfig/ui/tp_Trendline.ui:176
msgctxt "tp_Trendline|extended_tip|movingAverage"
msgid "A moving average trend line is shown with a given period."
msgstr "移动平均线是针对特定的期间的。"

#. mGkUE
#: chart2/uiconfig/ui/tp_Trendline.ui:195
msgctxt "tp_Trendline|label3"
msgid "Degree"
msgstr "次数"

#. HwBsk
#: chart2/uiconfig/ui/tp_Trendline.ui:200
msgctxt "tp_Trendline|extended_tip|label3"
msgid "Degree of polynomial trend line."
msgstr "多项式趋势线的角度。"

#. EAkKg
#: chart2/uiconfig/ui/tp_Trendline.ui:218
msgctxt "tp_Trendline|extended_tip|degree"
msgid "Degree of polynomial trend line."
msgstr "多项式趋势线的角度。"

#. ZvFov
#: chart2/uiconfig/ui/tp_Trendline.ui:243
msgctxt "tp_Trendline|label4"
msgid "Period"
msgstr "周期"

#. akCwy
#: chart2/uiconfig/ui/tp_Trendline.ui:248
msgctxt "tp_Trendline|extended_tip|label4"
msgid "Number of points to calculate average of moving average trend line."
msgstr "计算移动平均线的平均值时要使用的点的数量。"

#. g3mex
#: chart2/uiconfig/ui/tp_Trendline.ui:266
msgctxt "tp_Trendline|extended_tip|period"
msgid "Number of points to calculate average of moving average trend line."
msgstr "计算移动平均线的平均值时要使用的点的数量。"

#. ptaCA
#: chart2/uiconfig/ui/tp_Trendline.ui:359
msgctxt "tp_Trendline|label1"
msgid "Regression Type"
msgstr "回归分析类型"

#. mNh7m
#: chart2/uiconfig/ui/tp_Trendline.ui:392
msgctxt "tp_Trendline|label7"
msgid "Extrapolate Forward"
msgstr "前推"

#. 4HshA
#: chart2/uiconfig/ui/tp_Trendline.ui:398
msgctxt "tp_Trendline|extended_tip|label7"
msgid "Trend line is extrapolated for higher x-values."
msgstr "对更高的 x 值外推趋势线。"

#. tUrKr
#: chart2/uiconfig/ui/tp_Trendline.ui:411
msgctxt "tp_Trendline|label8"
msgid "Extrapolate Backward"
msgstr "倒推"

#. tEfNE
#: chart2/uiconfig/ui/tp_Trendline.ui:417
msgctxt "tp_Trendline|extended_tip|label8"
msgid "Trend line is extrapolated for lower x-values."
msgstr "对更低的 x 值外推趋势线。"

#. BGkFJ
#: chart2/uiconfig/ui/tp_Trendline.ui:457
msgctxt "tp_Trendline|setIntercept"
msgid "Force _Intercept"
msgstr "强制截断(_I)"

#. ZJUti
#: chart2/uiconfig/ui/tp_Trendline.ui:468
msgctxt "tp_Trendline|extended_tip|setIntercept"
msgid "For linear, polynomial and exponential trend lines, intercept value is forced to a given value."
msgstr "对于线性、多项式与指数趋势线，截断值强制为指定值。"

#. CSHNm
#: chart2/uiconfig/ui/tp_Trendline.ui:479
msgctxt "tp_Trendline|showEquation"
msgid "Show E_quation"
msgstr "显示等式(_Q)"

#. nXrm7
#: chart2/uiconfig/ui/tp_Trendline.ui:487
msgctxt "tp_Trendline|extended_tip|showEquation"
msgid "Shows the trend line equation next to the trend line."
msgstr "在趋势线旁显示趋势线方程式。"

#. cA58s
#: chart2/uiconfig/ui/tp_Trendline.ui:499
msgctxt "tp_Trendline|showCorrelationCoefficient"
msgid "Show _Coefficient of Determination (R²)"
msgstr "显示决定系数(R²值)(_C)"

#. CCyCH
#: chart2/uiconfig/ui/tp_Trendline.ui:507
msgctxt "tp_Trendline|extended_tip|showCorrelationCoefficient"
msgid "Shows the coefficient of determination next to the trend line."
msgstr "在趋势线旁显示相关系数。"

#. 2S6og
#: chart2/uiconfig/ui/tp_Trendline.ui:521
msgctxt "tp_Trendline|label5"
msgid "Trendline _Name"
msgstr "趋势线名称(_N)"

#. GasKo
#: chart2/uiconfig/ui/tp_Trendline.ui:527
msgctxt "tp_Trendline|extended_tip|label5"
msgid "Name of trend line in legend."
msgstr "图例中显示的趋势线的名称。"

#. FBT3Y
#: chart2/uiconfig/ui/tp_Trendline.ui:544
msgctxt "tp_Trendline|extended_tip|entry_name"
msgid "Name of trend line in legend."
msgstr "图例中显示的趋势线的名称。"

#. C4C6e
#: chart2/uiconfig/ui/tp_Trendline.ui:569
msgctxt "tp_Trendline|extended_tip|interceptValue"
msgid "Value of intercept if it is forced."
msgstr "强制时的截断值。"

#. GEKL2
#: chart2/uiconfig/ui/tp_Trendline.ui:582
msgctxt "tp_Trendline|label6"
msgid "_X Variable Name"
msgstr "_X 变量名称"

#. 99kQL
#: chart2/uiconfig/ui/tp_Trendline.ui:588
msgctxt "tp_Trendline|extended_tip|label6"
msgid "Name of X variable in trend line equation."
msgstr "趋势线等式中变量X的名称。"

#. Fz8b3
#: chart2/uiconfig/ui/tp_Trendline.ui:605
msgctxt "tp_Trendline|extended_tip|entry_Xname"
msgid "Name of X variable in trend line equation."
msgstr "趋势线等式中变量X的名称。"

#. GDQuF
#: chart2/uiconfig/ui/tp_Trendline.ui:618
msgctxt "tp_Trendline|label9"
msgid "_Y Variable Name"
msgstr "_Y 变量名称"

#. 2PBW3
#: chart2/uiconfig/ui/tp_Trendline.ui:624
msgctxt "tp_Trendline|extended_tip|label9"
msgid "Name of Y variable in trend line equation."
msgstr "趋势线等式中变量Y的名称。"

#. WHNXu
#: chart2/uiconfig/ui/tp_Trendline.ui:641
msgctxt "tp_Trendline|extended_tip|entry_Yname"
msgid "Name of Y variable in trend line equation."
msgstr "趋势线等式中变量Y的名称。"

#. 9WeUe
#: chart2/uiconfig/ui/tp_Trendline.ui:656
msgctxt "tp_Trendline|label2"
msgid "Options"
msgstr "选项"

#. ntcUA
#: chart2/uiconfig/ui/tp_axisLabel.ui:19
msgctxt "tp_axisLabel|showlabelsCB"
msgid "Sho_w labels"
msgstr "显示数据标志(_W)"

#. Xr5zw
#: chart2/uiconfig/ui/tp_axisLabel.ui:28
msgctxt "tp_axisLabel|extended_tip|showlabelsCB"
msgid "Specifies whether to show or hide the axis labels."
msgstr "指定显示还是隐藏轴标签。"

#. HFhGL
#: chart2/uiconfig/ui/tp_axisLabel.ui:62
msgctxt "tp_axisLabel|tile"
msgid "_Tile"
msgstr "并排(_T)"

#. cmjFi
#: chart2/uiconfig/ui/tp_axisLabel.ui:71
msgctxt "tp_axisLabel|extended_tip|tile"
msgid "Arranges numbers on the axis side by side."
msgstr "使轴上的数字并排排列。"

#. tHrCD
#: chart2/uiconfig/ui/tp_axisLabel.ui:83
msgctxt "tp_axisLabel|odd"
msgid "St_agger odd"
msgstr "上下移动(_A)"

#. Q8h6B
#: chart2/uiconfig/ui/tp_axisLabel.ui:92
msgctxt "tp_axisLabel|extended_tip|odd"
msgid "Staggers numbers on the axis, even numbers lower than odd numbers."
msgstr "交错排列轴上的数字，偶数在下奇数在上。"

#. tByen
#: chart2/uiconfig/ui/tp_axisLabel.ui:104
msgctxt "tp_axisLabel|even"
msgid "Stagger _even"
msgstr "下上移动(_E)"

#. 9EMGj
#: chart2/uiconfig/ui/tp_axisLabel.ui:113
msgctxt "tp_axisLabel|extended_tip|even"
msgid "Stagger numbers on the axes, odd numbers lower than even numbers."
msgstr "交错排列轴上的数字，奇数在下偶数在上。"

#. 2JwY3
#: chart2/uiconfig/ui/tp_axisLabel.ui:125
msgctxt "tp_axisLabel|auto"
msgid "A_utomatic"
msgstr "自动(_U)"

#. fj3Rq
#: chart2/uiconfig/ui/tp_axisLabel.ui:134
msgctxt "tp_axisLabel|extended_tip|auto"
msgid "Automatically arranges numbers on the axis."
msgstr "自动排列轴上的数字。"

#. bFH6L
#: chart2/uiconfig/ui/tp_axisLabel.ui:150
msgctxt "tp_axisLabel|orderL"
msgid "Order"
msgstr "排序"

#. GMtbb
#: chart2/uiconfig/ui/tp_axisLabel.ui:181
msgctxt "tp_axisLabel|overlapCB"
msgid "O_verlap"
msgstr "重叠(_V)"

#. zwgui
#: chart2/uiconfig/ui/tp_axisLabel.ui:189
msgctxt "tp_axisLabel|extended_tip|overlapCB"
msgid "Specifies that the text in cells may overlap other cells."
msgstr "指定单元格中的文本可以与其他单元格重叠。"

#. AYpQ8
#: chart2/uiconfig/ui/tp_axisLabel.ui:201
msgctxt "tp_axisLabel|breakCB"
msgid "_Break"
msgstr "换行(_B)"

#. eBwTo
#: chart2/uiconfig/ui/tp_axisLabel.ui:209
msgctxt "tp_axisLabel|extended_tip|breakCB"
msgid "Allows a text break."
msgstr "允许文本换行。"

#. 4EwR7
#: chart2/uiconfig/ui/tp_axisLabel.ui:225
msgctxt "tp_axisLabel|textflowL"
msgid "Text Flow"
msgstr "文字流"

#. exWTH
#: chart2/uiconfig/ui/tp_axisLabel.ui:281
msgctxt "tp_axisLabel|extended_tip|OrientDegree"
msgid "Allows you to manually enter the orientation angle."
msgstr "使您可以手动输入方向角度。"

#. 5teDt
#: chart2/uiconfig/ui/tp_axisLabel.ui:295
msgctxt "tp_axisLabel|degreeL"
msgid "_Degrees"
msgstr "度(_D)"

#. jFKoF
#: chart2/uiconfig/ui/tp_axisLabel.ui:330
msgctxt "tp_axisLabel|stackedCB"
msgid "Ve_rtically stacked"
msgstr "垂直堆积(_R)"

#. ra62A
#: chart2/uiconfig/ui/tp_axisLabel.ui:339
msgctxt "tp_axisLabel|extended_tip|stackedCB"
msgid "Assigns vertical text orientation for cell contents."
msgstr "指定单元格内容的文字方向为垂直。"

#. JBz5H
#: chart2/uiconfig/ui/tp_axisLabel.ui:351
msgctxt "tp_axisLabel|labelABCD"
msgid "ABCD"
msgstr "ABCD"

#. PE6RQ
#: chart2/uiconfig/ui/tp_axisLabel.ui:368
msgctxt "tp_axisLabel|textdirL"
msgid "Te_xt direction:"
msgstr "文字方向(_X):"

#. YUAjA
#: chart2/uiconfig/ui/tp_axisLabel.ui:382
msgctxt "tp_axisLabel|extended_tip|textdirLB"
msgid "Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled."
msgstr "为使用复杂文字版式 (CTL) 的段落指定文字方向。只有启用了复杂文字版式时，此功能才可用。"

#. NxsBh
#: chart2/uiconfig/ui/tp_axisLabel.ui:401
msgctxt "tp_axisLabel|extended_tip|dialCtrl"
msgid "Clicking anywhere on the wheel defines the variable text orientation."
msgstr "点击滚轮上的任意位置可以定义可变文本方向。"

#. 3WhzS
#: chart2/uiconfig/ui/tp_axisLabel.ui:416
msgctxt "tp_axisLabel|labelTextOrient"
msgid "Text Orientation"
msgstr "文字方向"

#. tCfsY
#: chart2/uiconfig/ui/wizelementspage.ui:40
msgctxt "wizelementspage|labelPrimaryXaxis"
msgid "_X axis"
msgstr "_X 轴"

#. LtEdA
#: chart2/uiconfig/ui/wizelementspage.ui:54
msgctxt "wizelementspage|labelPrimaryYaxis"
msgid "_Y axis"
msgstr "_Y 轴"

#. tVeNC
#: chart2/uiconfig/ui/wizelementspage.ui:68
msgctxt "wizelementspage|labelPrimaryZaxis"
msgid "_Z axis"
msgstr "_Z 轴"

#. 7qRfe
#: chart2/uiconfig/ui/wizelementspage.ui:87
msgctxt "wizelementspage|extended_tip|primaryXaxis"
msgid "Enter a label for the x-axis (horizontal)."
msgstr "输入 x 轴的标签 (水平)。"

#. 4vThc
#: chart2/uiconfig/ui/wizelementspage.ui:105
msgctxt "wizelementspage|extended_tip|primaryYaxis"
msgid "Enter a label for the y-axis (vertical)."
msgstr "为 y 轴输入一个标签 (垂直)。"

#. 7zPH5
#: chart2/uiconfig/ui/wizelementspage.ui:123
msgctxt "wizelementspage|extended_tip|primaryZaxis"
msgid "Enter a label for the z-axis. This option is only available for three-dimensional charts."
msgstr "为 z 轴输入一个标签。此选项只对三维图表可用。"

#. Qpj9H
#: chart2/uiconfig/ui/wizelementspage.ui:136
msgctxt "wizelementspage|labelMainTitle"
msgid "_Title"
msgstr "标题(_T)"

#. nPAjY
#: chart2/uiconfig/ui/wizelementspage.ui:150
msgctxt "wizelementspage|labelSubTitle"
msgid "_Subtitle"
msgstr "副标题(_S)"

#. CWmMQ
#: chart2/uiconfig/ui/wizelementspage.ui:169
msgctxt "wizelementspage|extended_tip|maintitle"
msgid "Enter a title for your chart."
msgstr "为图表输入一个标题。"

#. eNDvd
#: chart2/uiconfig/ui/wizelementspage.ui:187
msgctxt "wizelementspage|extended_tip|subtitle"
msgid "Enter a subtitle for your chart."
msgstr "输入图表的副标题。"

#. GJ7pJ
#: chart2/uiconfig/ui/wizelementspage.ui:200
msgctxt "wizelementspage|labelSecondaryXAxis"
msgid "X _axis"
msgstr "X 轴(_A)"

#. bBRgE
#: chart2/uiconfig/ui/wizelementspage.ui:214
msgctxt "wizelementspage|labelSecondaryYAxis"
msgid "Y ax_is"
msgstr "Y 轴(_I)"

#. NGoMT
#: chart2/uiconfig/ui/wizelementspage.ui:233
msgctxt "wizelementspage|extended_tip|secondaryXaxis"
msgid "Enter a label for the secondary x-axis. This option is only available for charts that support a secondary x-axis."
msgstr "为次 x 轴输入一个标签。该选项只适用于支持次 x 轴的图表。"

#. E6Y7y
#: chart2/uiconfig/ui/wizelementspage.ui:269
msgctxt "wizelementspage|show"
msgid "_Display legend"
msgstr "显示图例(_D)"

#. QWAen
#: chart2/uiconfig/ui/wizelementspage.ui:277
msgctxt "wizelementspage|extended_tip|show"
msgid "Specifies whether to display a legend for the chart."
msgstr "指定是否显示图表的图例。"

#. ejdzz
#: chart2/uiconfig/ui/wizelementspage.ui:295
msgctxt "wizelementspage|left"
msgid "_Left"
msgstr "左(_L)"

#. tGgc2
#: chart2/uiconfig/ui/wizelementspage.ui:304
msgctxt "wizelementspage|extended_tip|left"
msgid "Positions the legend at the left of the chart."
msgstr "将图例定位于图表的左侧。"

#. EjE6h
#: chart2/uiconfig/ui/wizelementspage.ui:315
msgctxt "wizelementspage|right"
msgid "_Right"
msgstr "右(_R)"

#. rvAN8
#: chart2/uiconfig/ui/wizelementspage.ui:324
msgctxt "wizelementspage|extended_tip|right"
msgid "Positions the legend at the right of the chart."
msgstr "将图例定位于图表的右侧。"

#. LnxgC
#: chart2/uiconfig/ui/wizelementspage.ui:335
msgctxt "wizelementspage|top"
msgid "_Top"
msgstr "顶部(_T)"

#. Ehv3g
#: chart2/uiconfig/ui/wizelementspage.ui:344
msgctxt "wizelementspage|extended_tip|top"
msgid "Positions the legend at the top of the chart."
msgstr "将图例定位于图表的顶部。"

#. GD2qS
#: chart2/uiconfig/ui/wizelementspage.ui:355
msgctxt "wizelementspage|bottom"
msgid "_Bottom"
msgstr "底部(_B)"

#. NCp3E
#: chart2/uiconfig/ui/wizelementspage.ui:364
msgctxt "wizelementspage|extended_tip|bottom"
msgid "Positions the legend at the bottom of the chart."
msgstr "将图例定位于图表的底部。"

#. REBEt
#: chart2/uiconfig/ui/wizelementspage.ui:391
msgctxt "wizelementspage|Axe"
msgid "Choose Titles, Legend, and Grid Settings"
msgstr "选择标题、图例以及网格设置"

#. wp2DC
#: chart2/uiconfig/ui/wizelementspage.ui:421
msgctxt "wizelementspage|x"
msgid "X axis"
msgstr "X 轴"

#. KbejV
#: chart2/uiconfig/ui/wizelementspage.ui:429
msgctxt "wizelementspage|extended_tip|x"
msgid "Displays grid lines that are perpendicular to the x-axis."
msgstr "显示与 x 轴垂直的网格线。"

#. KPGMU
#: chart2/uiconfig/ui/wizelementspage.ui:440
msgctxt "wizelementspage|y"
msgid "Y ax_is"
msgstr "Y 轴(_I)"

#. Nivye
#: chart2/uiconfig/ui/wizelementspage.ui:448
msgctxt "wizelementspage|extended_tip|y"
msgid "Displays grid lines that are perpendicular to the y-axis."
msgstr "显示与 y 轴垂直的网格线。"

#. G65v4
#: chart2/uiconfig/ui/wizelementspage.ui:459
msgctxt "wizelementspage|z"
msgid "Z axi_s"
msgstr "Z 轴(_S)"

#. uVwTv
#: chart2/uiconfig/ui/wizelementspage.ui:467
msgctxt "wizelementspage|extended_tip|z"
msgid "Displays grid lines that are perpendicular to the z-axis. This option is only available for three-dimensional charts."
msgstr "显示与 z 轴垂直的网格线。此选项只对三维图表可用。"

#. wNqwZ
#: chart2/uiconfig/ui/wizelementspage.ui:482
msgctxt "wizelementspage|label2"
msgid "Display Grids"
msgstr "显示网格"