#. extracted from chart2/inc msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: https://bugs.libreoffice.org/enter_bug.cgi?product=LibreOffice&bug_status=UNCONFIRMED&component=UI\n" "POT-Creation-Date: 2020-09-07 17:17+0200\n" "PO-Revision-Date: 2020-08-12 05:35+0000\n" "Last-Translator: Po-Yen Huang \n" "Language-Team: Chinese (Traditional) \n" "Language: zh-TW\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Accelerator-Marker: ~\n" "X-Generator: LibreOffice\n" "X-POOTLE-MTIME: 1547561555.000000\n" #. NCRDD #: chart2/inc/chart.hrc:16 msgctxt "tp_ChartType|liststore1" msgid "Bar" msgstr "長條" #. YpLZF #: chart2/inc/chart.hrc:17 msgctxt "tp_ChartType|liststore1" msgid "Cylinder" msgstr "圓柱" #. VLXhh #: chart2/inc/chart.hrc:18 msgctxt "tp_ChartType|liststore1" msgid "Cone" msgstr "圓錐" #. xsWC2 #: chart2/inc/chart.hrc:19 msgctxt "tp_ChartType|liststore1" msgid "Pyramid" msgstr "角錐" #. v9sqX #: chart2/inc/strings.hrc:24 msgctxt "STR_DLG_CHART_WIZARD" msgid "Chart Wizard" msgstr "圖表精靈" #. HCEG9 #: chart2/inc/strings.hrc:25 msgctxt "STR_DLG_SMOOTH_LINE_PROPERTIES" msgid "Smooth Lines" msgstr "平滑線" #. qxGHJ #: chart2/inc/strings.hrc:26 msgctxt "STR_DLG_STEPPED_LINE_PROPERTIES" msgid "Stepped Lines" msgstr "階狀線" #. LcVWV #: chart2/inc/strings.hrc:27 msgctxt "STR_DLG_REMOVE_DATA_TABLE" msgid "This chart currently contains an internal data table. Do you want to proceed, deleting the internal data table, and set a new data range?" msgstr "該圖表目前包含內部資料表。繼續的話會刪除內部資料表，並設定新的資料範圍。您是否要繼續？" #. E2JCT #: chart2/inc/strings.hrc:28 msgctxt "STR_PAGE_CHARTTYPE" msgid "Chart Type" msgstr "圖表類型" #. GFDEv #: chart2/inc/strings.hrc:29 msgctxt "STR_PAGE_DATA_RANGE" msgid "Data Range" msgstr "資料範圍" #. uxZuD #: chart2/inc/strings.hrc:30 msgctxt "STR_PAGE_CHART_ELEMENTS" msgid "Chart Elements" msgstr "圖表元素" #. sDxQz #: chart2/inc/strings.hrc:31 msgctxt "STR_PAGE_LINE" msgid "Line" msgstr "線條" #. EoKxj #: chart2/inc/strings.hrc:32 msgctxt "STR_PAGE_BORDER" msgid "Borders" msgstr "邊框" #. 2suvG #: chart2/inc/strings.hrc:33 msgctxt "STR_PAGE_AREA" msgid "Area" msgstr "面積圖" #. 3sDYn #: chart2/inc/strings.hrc:34 msgctxt "STR_PAGE_TRANSPARENCY" msgid "Transparency" msgstr "透明度" #. tESet #: chart2/inc/strings.hrc:35 msgctxt "STR_PAGE_FONT" msgid "Font" msgstr "字型" #. ByYYG #: chart2/inc/strings.hrc:36 msgctxt "STR_PAGE_FONT_EFFECTS" msgid "Font Effects" msgstr "字型效果" #. YydEQ #: chart2/inc/strings.hrc:37 msgctxt "STR_PAGE_NUMBERS" msgid "Numbers" msgstr "數字" #. nTFNm #: chart2/inc/strings.hrc:38 msgctxt "STR_PAGE_POSITION" msgid "Position" msgstr "排序" #. iTeHp #: chart2/inc/strings.hrc:39 msgctxt "STR_PAGE_LAYOUT" msgid "Layout" msgstr "版面配置" #. 4Gz8K #: chart2/inc/strings.hrc:40 msgctxt "STR_PAGE_OPTIONS" msgid "Options" msgstr "選項" #. RCGEN #: chart2/inc/strings.hrc:41 msgctxt "STR_PAGE_SCALE" msgid "Scale" msgstr "顯示比例" #. QR25P #: chart2/inc/strings.hrc:42 msgctxt "STR_PAGE_POSITIONING" msgid "Positioning" msgstr "定位" #. omcEo #: chart2/inc/strings.hrc:43 msgctxt "STR_PAGE_TRENDLINE_TYPE" msgid "Type" msgstr "類型" #. EvFoA #: chart2/inc/strings.hrc:44 msgctxt "STR_PAGE_XERROR_BARS" msgid "X Error Bars" msgstr "X 誤差線" #. NKDFm #: chart2/inc/strings.hrc:45 msgctxt "STR_PAGE_YERROR_BARS" msgid "Y Error Bars" msgstr "Y 誤差線" #. mjAwD #: chart2/inc/strings.hrc:46 msgctxt "STR_PAGE_ALIGNMENT" msgid "Alignment" msgstr "對齊" #. hXbmP #: chart2/inc/strings.hrc:47 msgctxt "STR_PAGE_PERSPECTIVE" msgid "Perspective" msgstr "透視" #. 7RHre #: chart2/inc/strings.hrc:48 msgctxt "STR_PAGE_APPEARANCE" msgid "Appearance" msgstr "外觀" #. mvWu8 #: chart2/inc/strings.hrc:49 msgctxt "STR_PAGE_ILLUMINATION" msgid "Illumination" msgstr "照明" #. YBnCa #: chart2/inc/strings.hrc:50 msgctxt "STR_PAGE_ASIAN" msgid "Asian Typography" msgstr "亞洲語言排版式樣" #. 6xo4a #: chart2/inc/strings.hrc:51 msgctxt "STR_OBJECT_AVERAGE_LINE_WITH_PARAMETERS" msgid "Mean value line with value %AVERAGE_VALUE and standard deviation %STD_DEVIATION" msgstr "值為 %AVERAGE_VALUE 且標準偏差為 %STD_DEVIATION 的平均值線" #. eP9wF #: chart2/inc/strings.hrc:52 msgctxt "STR_OBJECT_AXIS" msgid "Axis" msgstr "軸" #. jNgVd #: chart2/inc/strings.hrc:53 msgctxt "STR_OBJECT_AXIS_X" msgid "X Axis" msgstr "X 軸" #. cA4xe #: chart2/inc/strings.hrc:54 msgctxt "STR_OBJECT_AXIS_Y" msgid "Y Axis" msgstr "Y 軸" #. ZXErW #: chart2/inc/strings.hrc:55 msgctxt "STR_OBJECT_AXIS_Z" msgid "Z Axis" msgstr "Z 軸" #. qkJUd #: chart2/inc/strings.hrc:56 msgctxt "STR_OBJECT_SECONDARY_X_AXIS" msgid "Secondary X Axis" msgstr "輔助 X 軸" #. YHCbM #: chart2/inc/strings.hrc:57 msgctxt "STR_OBJECT_SECONDARY_Y_AXIS" msgid "Secondary Y Axis" msgstr "輔助 Y 軸" #. natrx #: chart2/inc/strings.hrc:58 msgctxt "STR_OBJECT_AXES" msgid "Axes" msgstr "軸" #. FE87Y #: chart2/inc/strings.hrc:59 msgctxt "STR_OBJECT_GRIDS" msgid "Grids" msgstr "網格" #. zyanU #: chart2/inc/strings.hrc:60 msgctxt "STR_OBJECT_GRID" msgid "Grid" msgstr "網格" #. pEwe5 #: chart2/inc/strings.hrc:61 msgctxt "STR_OBJECT_GRID_MAJOR_X" msgid "X Axis Major Grid" msgstr "X 軸主網格" #. ETsPn #: chart2/inc/strings.hrc:62 msgctxt "STR_OBJECT_GRID_MAJOR_Y" msgid "Y Axis Major Grid" msgstr "Y 軸主網格" #. SonFW #: chart2/inc/strings.hrc:63 msgctxt "STR_OBJECT_GRID_MAJOR_Z" msgid "Z Axis Major Grid" msgstr "Z 軸主網格" #. sBgvb #: chart2/inc/strings.hrc:64 msgctxt "STR_OBJECT_GRID_MINOR_X" msgid "X Axis Minor Grid" msgstr "X 軸次網格" #. 3YcEK #: chart2/inc/strings.hrc:65 msgctxt "STR_OBJECT_GRID_MINOR_Y" msgid "Y Axis Minor Grid" msgstr "Y 軸次網格" #. hkZQA #: chart2/inc/strings.hrc:66 msgctxt "STR_OBJECT_GRID_MINOR_Z" msgid "Z Axis Minor Grid" msgstr "Z 軸次網格" #. HRr84 #: chart2/inc/strings.hrc:67 msgctxt "STR_OBJECT_LEGEND" msgid "Legend" msgstr "圖例" #. BKrVD #: chart2/inc/strings.hrc:68 msgctxt "STR_OBJECT_TITLE" msgid "Title" msgstr "標題" #. daY6i #: chart2/inc/strings.hrc:69 msgctxt "STR_OBJECT_TITLES" msgid "Titles" msgstr "標題" #. HPrwf #: chart2/inc/strings.hrc:70 msgctxt "STR_OBJECT_TITLE_MAIN" msgid "Main Title" msgstr "主標題" #. 3HPz3 #: chart2/inc/strings.hrc:71 msgctxt "STR_OBJECT_TITLE_SUB" msgid "Subtitle" msgstr "子標題" #. eZE2v #: chart2/inc/strings.hrc:72 msgctxt "STR_OBJECT_TITLE_X_AXIS" msgid "X Axis Title" msgstr "X 軸題名" #. uqBii #: chart2/inc/strings.hrc:73 msgctxt "STR_OBJECT_TITLE_Y_AXIS" msgid "Y Axis Title" msgstr "Y 軸標題" #. 37EU5 #: chart2/inc/strings.hrc:74 msgctxt "STR_OBJECT_TITLE_Z_AXIS" msgid "Z Axis Title" msgstr "Z 軸標題" #. QmoDH #: chart2/inc/strings.hrc:75 msgctxt "STR_OBJECT_TITLE_SECONDARY_X_AXIS" msgid "Secondary X Axis Title" msgstr "輔助 X 軸標題" #. F7NWG #: chart2/inc/strings.hrc:76 msgctxt "STR_OBJECT_TITLE_SECONDARY_Y_AXIS" msgid "Secondary Y Axis Title" msgstr "輔助 Y 軸標題" #. AtLNM #: chart2/inc/strings.hrc:77 msgctxt "STR_OBJECT_LABEL" msgid "Label" msgstr "標籤" #. ag7pg #: chart2/inc/strings.hrc:78 msgctxt "STR_OBJECT_DATALABELS" msgid "Data Labels" msgstr "資料標籤" #. ts3Cj #: chart2/inc/strings.hrc:79 msgctxt "STR_OBJECT_DATAPOINT" msgid "Data Point" msgstr "資料點" #. EnsUx #: chart2/inc/strings.hrc:80 msgctxt "STR_OBJECT_DATAPOINTS" msgid "Data Points" msgstr "資料點" #. CqWnU #: chart2/inc/strings.hrc:81 msgctxt "STR_OBJECT_LEGEND_SYMBOL" msgid "Legend Key" msgstr "圖例鍵" #. jNwC8 #: chart2/inc/strings.hrc:82 msgctxt "STR_OBJECT_DATASERIES" msgid "Data Series" msgstr "資料序列" #. Zf7DA #: chart2/inc/strings.hrc:83 msgctxt "STR_OBJECT_DATASERIES_PLURAL" msgid "Data Series" msgstr "資料序列" #. 3G9WG #: chart2/inc/strings.hrc:84 msgctxt "STR_OBJECT_CURVE" msgid "Trend Line" msgstr "趨勢線" #. 8miGx #: chart2/inc/strings.hrc:85 msgctxt "STR_OBJECT_CURVES" msgid "Trend Lines" msgstr "趨勢線" #. ESVL6 #: chart2/inc/strings.hrc:86 msgctxt "STR_OBJECT_CURVE_WITH_PARAMETERS" msgid "Trend line %FORMULA with accuracy R² = %RSQUARED" msgstr "趨勢線 %FORMULA，其精確度為 R² = %RSQUARED" #. DrVz3 #: chart2/inc/strings.hrc:87 msgctxt "STR_OBJECT_MOVING_AVERAGE_WITH_PARAMETERS" msgid "Moving average trend line with period = %PERIOD" msgstr "移動平均趨勢線，其週期 = %PERIOD" #. mcMQC #: chart2/inc/strings.hrc:88 msgctxt "STR_OBJECT_AVERAGE_LINE" msgid "Mean Value Line" msgstr "平均值線" #. RLMNC #: chart2/inc/strings.hrc:89 msgctxt "STR_OBJECT_CURVE_EQUATION" msgid "Equation" msgstr "方程式" #. apx4j #: chart2/inc/strings.hrc:90 msgctxt "STR_OBJECT_ERROR_BARS_X" msgid "X Error Bars" msgstr "X 誤差線" #. BUEbq #: chart2/inc/strings.hrc:91 msgctxt "STR_OBJECT_ERROR_BARS_Y" msgid "Y Error Bars" msgstr "Y 誤差線" #. tQCpv #: chart2/inc/strings.hrc:92 msgctxt "STR_OBJECT_ERROR_BARS_Z" msgid "Z Error Bars" msgstr "Z 誤差線" #. bz4Dw #: chart2/inc/strings.hrc:93 msgctxt "STR_OBJECT_STOCK_LOSS" msgid "Stock Loss" msgstr "股票虧損" #. AFE2t #: chart2/inc/strings.hrc:94 msgctxt "STR_OBJECT_STOCK_GAIN" msgid "Stock Gain" msgstr "股票收益" #. Y5Qif #: chart2/inc/strings.hrc:95 msgctxt "STR_OBJECT_PAGE" msgid "Chart Area" msgstr "圖表區塊" #. J9m2k #: chart2/inc/strings.hrc:96 msgctxt "STR_OBJECT_DIAGRAM" msgid "Chart" msgstr "圖表" #. oRCev #: chart2/inc/strings.hrc:97 msgctxt "STR_OBJECT_DIAGRAM_WALL" msgid "Chart Wall" msgstr "圖表背景" #. meV4E #: chart2/inc/strings.hrc:98 msgctxt "STR_OBJECT_DIAGRAM_FLOOR" msgid "Chart Floor" msgstr "圖表底板" #. AHV4D #: chart2/inc/strings.hrc:99 msgctxt "STR_OBJECT_SHAPE" msgid "Drawing Object" msgstr "繪圖物件" #. dNCXG #: chart2/inc/strings.hrc:100 msgctxt "STR_TIP_DATASERIES" msgid "Data Series '%SERIESNAME'" msgstr "資料序列「%SERIESNAME」" #. LDsiQ #: chart2/inc/strings.hrc:101 msgctxt "STR_TIP_DATAPOINT_INDEX" msgid "Data Point %POINTNUMBER" msgstr "資料點 %POINTNUMBER" #. 6C6HT #: chart2/inc/strings.hrc:102 msgctxt "STR_TIP_DATAPOINT_VALUES" msgid "Values: %POINTVALUES" msgstr "值：%POINTVALUES" #. rCVeF #: chart2/inc/strings.hrc:103 msgctxt "STR_TIP_DATAPOINT" msgid "Data Point %POINTNUMBER, data series %SERIESNUMBER, values: %POINTVALUES" msgstr "資料點 %POINTNUMBER，資料序列 %SERIESNUMBER，值：%POINTVALUES" #. eKDAq #: chart2/inc/strings.hrc:104 msgctxt "STR_STATUS_DATAPOINT_MARKED" msgid "Data point %POINTNUMBER in data series %SERIESNUMBER selected, values: %POINTVALUES" msgstr "已選取%POINTNUMBER 資料點，位在 %SERIESNUMBER 資料序列，其值為：%POINTVALUES" #. iKkhv #: chart2/inc/strings.hrc:105 msgctxt "STR_STATUS_OBJECT_MARKED" msgid "%OBJECTNAME selected" msgstr "已選取 %OBJECTNAME" #. vyJED #: chart2/inc/strings.hrc:106 msgctxt "STR_STATUS_PIE_SEGMENT_EXPLODED" msgid "Pie exploded by %PERCENTVALUE percent" msgstr "以 %PERCENTVALUE 百分比分解的餅圖" #. FbGFr #: chart2/inc/strings.hrc:107 msgctxt "STR_OBJECT_FOR_SERIES" msgid "%OBJECTNAME for Data Series '%SERIESNAME'" msgstr "資料序列「%SERIESNAME」的 %OBJECTNAME" #. VVB54 #: chart2/inc/strings.hrc:108 msgctxt "STR_OBJECT_FOR_ALL_SERIES" msgid "%OBJECTNAME for all Data Series" msgstr "所有資料序列的 %OBJECTNAME" #. Ahjrv #: chart2/inc/strings.hrc:109 msgctxt "STR_ACTION_EDIT_CHARTTYPE" msgid "Edit chart type" msgstr "編輯圖表類型" #. zSLvA #: chart2/inc/strings.hrc:110 msgctxt "STR_ACTION_EDIT_DATA_RANGES" msgid "Edit data ranges" msgstr "編輯資料範圍" #. RmtWN #: chart2/inc/strings.hrc:111 msgctxt "STR_ACTION_EDIT_3D_VIEW" msgid "Edit 3D view" msgstr "編輯 3D 檢視" #. REBbR #: chart2/inc/strings.hrc:112 msgctxt "STR_ACTION_EDIT_CHART_DATA" msgid "Edit chart data" msgstr "編輯圖表資料" #. Y7hDD #: chart2/inc/strings.hrc:113 msgctxt "STR_ACTION_TOGGLE_LEGEND" msgid "Legend on/off" msgstr "顯示/隱藏圖例" #. fnfBr #: chart2/inc/strings.hrc:114 msgctxt "STR_ACTION_TOGGLE_GRID_HORZ" msgid "Horizontal grid major/major&minor/off" msgstr "水平網格主線/主線與次線/關閉" #. jZDDr #: chart2/inc/strings.hrc:115 msgctxt "STR_ACTION_TOGGLE_GRID_VERTICAL" msgid "Vertical grid major/major&minor/off" msgstr "垂直網格主線/主線與次線/關閉" #. bZzzZ #: chart2/inc/strings.hrc:116 msgctxt "STR_ACTION_SCALE_TEXT" msgid "Scale Text" msgstr "文字顯示比例" #. wJ7wY #: chart2/inc/strings.hrc:117 msgctxt "STR_ACTION_REARRANGE_CHART" msgid "Automatic Layout" msgstr "自動版面配置" #. j4xMg #: chart2/inc/strings.hrc:118 msgctxt "STR_ACTION_NOTPOSSIBLE" msgid "This function cannot be completed with the selected objects." msgstr "這個功能無法以所選取物件完成。" #. GaEzn #: chart2/inc/strings.hrc:119 msgctxt "STR_ACTION_EDIT_TEXT" msgid "Edit text" msgstr "編輯文字" #. EVDVA #: chart2/inc/strings.hrc:120 msgctxt "STR_COLUMN_LABEL" msgid "Column %COLUMNNUMBER" msgstr "欄 %COLUMNNUMBER" #. dmCD9 #: chart2/inc/strings.hrc:121 msgctxt "STR_ROW_LABEL" msgid "Row %ROWNUMBER" msgstr "列 %ROWNUMBER" #. fVS6E #: chart2/inc/strings.hrc:122 msgctxt "STR_DATA_ROLE_LABEL" msgid "Name" msgstr "名稱" #. ozAB8 #: chart2/inc/strings.hrc:123 msgctxt "STR_DATA_ROLE_X" msgid "X-Values" msgstr "X 值" #. FgGiW #: chart2/inc/strings.hrc:124 msgctxt "STR_DATA_ROLE_Y" msgid "Y-Values" msgstr "Y 值" #. vzYAg #: chart2/inc/strings.hrc:125 msgctxt "STR_DATA_ROLE_SIZE" msgid "Bubble Sizes" msgstr "泡泡大小" #. pMGL4 #: chart2/inc/strings.hrc:126 msgctxt "STR_DATA_ROLE_X_ERROR" msgid "X-Error-Bars" msgstr "X 誤差線" #. c9oCh #: chart2/inc/strings.hrc:127 msgctxt "STR_DATA_ROLE_X_ERROR_POSITIVE" msgid "Positive X-Error-Bars" msgstr "正值的 X 誤差線" #. uTsVM #: chart2/inc/strings.hrc:128 msgctxt "STR_DATA_ROLE_X_ERROR_NEGATIVE" msgid "Negative X-Error-Bars" msgstr "負值的 X 誤差線" #. RZaBP #: chart2/inc/strings.hrc:129 msgctxt "STR_DATA_ROLE_Y_ERROR" msgid "Y-Error-Bars" msgstr "Y 誤差線" #. ZFFKK #: chart2/inc/strings.hrc:130 msgctxt "STR_DATA_ROLE_Y_ERROR_POSITIVE" msgid "Positive Y-Error-Bars" msgstr "正值的 Y 誤差線" #. pZ3af #: chart2/inc/strings.hrc:131 msgctxt "STR_DATA_ROLE_Y_ERROR_NEGATIVE" msgid "Negative Y-Error-Bars" msgstr "負值的 Y 誤差線" #. SD2nd #: chart2/inc/strings.hrc:132 msgctxt "STR_DATA_ROLE_FIRST" msgid "Open Values" msgstr "起始值" #. fySNC #: chart2/inc/strings.hrc:133 msgctxt "STR_DATA_ROLE_LAST" msgid "Close Values" msgstr "結束值" #. j5tve #: chart2/inc/strings.hrc:134 msgctxt "STR_DATA_ROLE_MIN" msgid "Low Values" msgstr "最小值" #. kr9Ta #: chart2/inc/strings.hrc:135 msgctxt "STR_DATA_ROLE_MAX" msgid "High Values" msgstr "最大值" #. bK6ee #: chart2/inc/strings.hrc:136 msgctxt "STR_DATA_ROLE_CATEGORIES" msgid "Categories" msgstr "類別" #. yL7QE #: chart2/inc/strings.hrc:137 msgctxt "STR_DATA_UNNAMED_SERIES" msgid "Series" msgstr "序列" #. EgbkL #: chart2/inc/strings.hrc:138 msgctxt "STR_DATA_UNNAMED_SERIES_WITH_INDEX" msgid "Series%NUMBER" msgstr "序列%NUMBER" #. E2YZH #: chart2/inc/strings.hrc:139 msgctxt "STR_DATA_SELECT_RANGE_FOR_SERIES" msgid "Select Range for %VALUETYPE of %SERIESNAME" msgstr "選取 %SERIESNAME 之 %VALUETYPE 的範圍" #. pBSSc #: chart2/inc/strings.hrc:140 msgctxt "STR_DATA_SELECT_RANGE_FOR_CATEGORIES" msgid "Select Range for Categories" msgstr "選取類別的範圍" #. brKa4 #: chart2/inc/strings.hrc:141 msgctxt "STR_DATA_SELECT_RANGE_FOR_DATALABELS" msgid "Select Range for data labels" msgstr "選取資料標籤的範圍" #. EDFdH #: chart2/inc/strings.hrc:142 msgctxt "STR_DATA_EDITOR_INCORRECT_INPUT" msgid "" "Your last input is incorrect.\n" "Ignore this change and close the dialog?" msgstr "" "您的最新輸入不正確。\n" "忽略此變更並關閉對話方塊？" #. Vx6bG #: chart2/inc/strings.hrc:143 msgctxt "STR_TEXT_DIRECTION_LTR" msgid "Left-to-right" msgstr "由左至右" #. WoDyW #: chart2/inc/strings.hrc:144 msgctxt "STR_TEXT_DIRECTION_RTL" msgid "Right-to-left" msgstr "由右至左" #. dtE2L #: chart2/inc/strings.hrc:145 msgctxt "STR_TEXT_DIRECTION_SUPER" msgid "Use superordinate object settings" msgstr "使用上一層物件設定" #. GtGu4 #: chart2/inc/strings.hrc:146 msgctxt "STR_PROPERTY_ROLE_FILLCOLOR" msgid "Fill Color" msgstr "填入色彩" #. bzDDY #: chart2/inc/strings.hrc:147 msgctxt "STR_PROPERTY_ROLE_BORDERCOLOR" msgid "Border Color" msgstr "邊框色彩" #. TuRxr #: chart2/inc/strings.hrc:149 msgctxt "STR_CONTROLTEXT_ERROR_BARS_FROM_DATA" msgid "From Data Table" msgstr "從資料表格" #. aPEDY #: chart2/inc/strings.hrc:150 msgctxt "STR_REGRESSION_LINEAR" msgid "Linear" msgstr "線性" #. nD8ay #: chart2/inc/strings.hrc:151 msgctxt "STR_REGRESSION_LOG" msgid "Logarithmic" msgstr "對數" #. CotSJ #: chart2/inc/strings.hrc:152 msgctxt "STR_REGRESSION_EXP" msgid "Exponential" msgstr "指數" #. HqBJV #: chart2/inc/strings.hrc:153 msgctxt "STR_REGRESSION_POWER" msgid "Power" msgstr "次方" #. dBiUj #: chart2/inc/strings.hrc:154 msgctxt "STR_REGRESSION_POLYNOMIAL" msgid "Polynomial" msgstr "多項式" #. FWi4g #: chart2/inc/strings.hrc:155 msgctxt "STR_REGRESSION_MOVING_AVERAGE" msgid "Moving average" msgstr "移動平均" #. psj3B #: chart2/inc/strings.hrc:156 msgctxt "STR_REGRESSION_MEAN" msgid "Mean" msgstr "平均數" #. C8FVd #: chart2/inc/strings.hrc:158 msgctxt "STR_TYPE_COLUMN" msgid "Column" msgstr "直欄" #. SWPnA #: chart2/inc/strings.hrc:159 msgctxt "STR_TYPE_BAR" msgid "Bar" msgstr "橫列" #. xUnpz #: chart2/inc/strings.hrc:160 msgctxt "STR_TYPE_AREA" msgid "Area" msgstr "面積圖" #. bqxBm #: chart2/inc/strings.hrc:161 msgctxt "STR_TYPE_PIE" msgid "Pie" msgstr "圓餅圖" #. GGwEH #: chart2/inc/strings.hrc:162 msgctxt "STR_PIE_EXPLODED" msgid "Exploded Pie Chart" msgstr "分裂的圓餅圖" #. gxFtf #: chart2/inc/strings.hrc:163 msgctxt "STR_DONUT_EXPLODED" msgid "Exploded Donut Chart" msgstr "分裂的環圈圖" #. nsoQ2 #: chart2/inc/strings.hrc:164 msgctxt "STR_DONUT" msgid "Donut" msgstr "環圈圖" #. 7HjEG #: chart2/inc/strings.hrc:165 msgctxt "STR_TYPE_LINE" msgid "Line" msgstr "線條" #. Miu8E #: chart2/inc/strings.hrc:166 msgctxt "STR_TYPE_XY" msgid "XY (Scatter)" msgstr "XY (散佈)" #. LBFRX #: chart2/inc/strings.hrc:167 msgctxt "STR_POINTS_AND_LINES" msgid "Points and Lines" msgstr "點與線" #. fjka7 #: chart2/inc/strings.hrc:168 msgctxt "STR_POINTS_ONLY" msgid "Points Only" msgstr "僅限點" #. Sz53v #: chart2/inc/strings.hrc:169 msgctxt "STR_LINES_ONLY" msgid "Lines Only" msgstr "僅限線條" #. AAEA2 #: chart2/inc/strings.hrc:170 msgctxt "STR_LINES_3D" msgid "3D Lines" msgstr "3D 線條" #. ABjEg #: chart2/inc/strings.hrc:171 msgctxt "STR_TYPE_COMBI_COLUMN_LINE" msgid "Column and Line" msgstr "欄與線" #. nVKfC #: chart2/inc/strings.hrc:172 msgctxt "STR_LINE_COLUMN" msgid "Columns and Lines" msgstr "欄與線" #. QkQSa #: chart2/inc/strings.hrc:173 msgctxt "STR_LINE_STACKEDCOLUMN" msgid "Stacked Columns and Lines" msgstr "堆疊欄與線" #. HGKEx #: chart2/inc/strings.hrc:174 msgctxt "STR_TYPE_NET" msgid "Net" msgstr "網狀圖" #. BKUc4 #: chart2/inc/strings.hrc:175 msgctxt "STR_TYPE_STOCK" msgid "Stock" msgstr "股票" #. oG4gw #: chart2/inc/strings.hrc:176 msgctxt "STR_STOCK_1" msgid "Stock Chart 1" msgstr "股票圖表 1" #. pSzDo #: chart2/inc/strings.hrc:177 msgctxt "STR_STOCK_2" msgid "Stock Chart 2" msgstr "股票圖表 2" #. aEFDu #: chart2/inc/strings.hrc:178 msgctxt "STR_STOCK_3" msgid "Stock Chart 3" msgstr "股票圖表 3" #. jZqox #: chart2/inc/strings.hrc:179 msgctxt "STR_STOCK_4" msgid "Stock Chart 4" msgstr "股票圖表 4" #. DNBgg #: chart2/inc/strings.hrc:180 msgctxt "STR_NORMAL" msgid "Normal" msgstr "一般" #. EfGVL #: chart2/inc/strings.hrc:181 msgctxt "STR_STACKED" msgid "Stacked" msgstr "重疊" #. wqtzw #: chart2/inc/strings.hrc:182 msgctxt "STR_PERCENT" msgid "Percent Stacked" msgstr "重疊百分比" #. 52UGB #: chart2/inc/strings.hrc:183 msgctxt "STR_DEEP" msgid "Deep" msgstr "深度" #. dxfuQ #: chart2/inc/strings.hrc:184 msgctxt "STR_FILLED" msgid "Filled" msgstr "填滿" #. rC5nu #: chart2/inc/strings.hrc:185 msgctxt "STR_TYPE_BUBBLE" msgid "Bubble" msgstr "泡泡" #. N9tXx #: chart2/inc/strings.hrc:186 msgctxt "STR_BUBBLE_1" msgid "Bubble Chart" msgstr "泡泡圖" #. AjPsf #: chart2/inc/strings.hrc:188 msgctxt "STR_INVALID_NUMBER" msgid "Numbers are required. Check your input." msgstr "需要有數值。請檢查您的輸入。" #. ofh4V #: chart2/inc/strings.hrc:189 msgctxt "STR_STEP_GT_ZERO" msgid "The major interval requires a positive number. Check your input." msgstr "主區間值需要正數。請檢查您的輸入。" #. EBJjR #: chart2/inc/strings.hrc:190 msgctxt "STR_BAD_LOGARITHM" msgid "The logarithmic scale requires positive numbers. Check your input." msgstr "對數顯示比例需要正數。請檢查您的輸入。" #. K8BCB #: chart2/inc/strings.hrc:191 msgctxt "STR_MIN_GREATER_MAX" msgid "The minimum must be lower than the maximum. Check your input." msgstr "最小值必須小於最大值。請檢查您的輸入。" #. oBR4x #: chart2/inc/strings.hrc:192 msgctxt "STR_INVALID_INTERVALS" msgid "The major interval needs to be greater than the minor interval. Check your input." msgstr "主區間值需要大於次區間值。請檢查您的輸入。" #. ZvDEh #: chart2/inc/strings.hrc:193 msgctxt "STR_INVALID_TIME_UNIT" msgid "The major and minor interval need to be greater or equal to the resolution. Check your input." msgstr "主區間值與次區間值需要大於或等於解析度。請檢查您的輸入。" #. VVVyQ #: chart2/uiconfig/ui/3dviewdialog.ui:8 msgctxt "3dviewdialog|3DViewDialog" msgid "3D View" msgstr "3D 檢視" #. 3aACC #: chart2/uiconfig/ui/chardialog.ui:8 msgctxt "chardialog|CharDialog" msgid "Character" msgstr "字元" #. v55EG #: chart2/uiconfig/ui/chardialog.ui:134 msgctxt "chardialog|font" msgid "Font" msgstr "字型" #. TnnrC #: chart2/uiconfig/ui/chardialog.ui:180 msgctxt "chardialog|fonteffects" msgid "Font Effects" msgstr "字型效果" #. nvprJ #: chart2/uiconfig/ui/chardialog.ui:227 msgctxt "chardialog|position" msgid "Position" msgstr "位置" #. vuzAY #: chart2/uiconfig/ui/chartdatadialog.ui:8 msgctxt "chartdatadialog|ChartDataDialog" msgid "Data Table" msgstr "資料表格" #. ywdAz #: chart2/uiconfig/ui/chartdatadialog.ui:72 msgctxt "chartdatadialog|InsertRow" msgid "Insert Row" msgstr "插入列" #. 8ijLs #: chart2/uiconfig/ui/chartdatadialog.ui:77 msgctxt "chartdatadialog|extended_tip|InsertRow" msgid "Inserts a new row below the current row." msgstr "在目前列之下插入新列。" #. DDsFz #: chart2/uiconfig/ui/chartdatadialog.ui:90 msgctxt "chartdatadialog|InsertColumn" msgid "Insert Series" msgstr "插入資料序列" #. EjHBF #: chart2/uiconfig/ui/chartdatadialog.ui:95 msgctxt "chartdatadialog|extended_tip|InsertColumn" msgid "Inserts a new data series after the current column." msgstr "在目前欄之後插入新的資料序列。" #. KuFy7 #: chart2/uiconfig/ui/chartdatadialog.ui:108 msgctxt "chartdatadialog|InsertTextColumn" msgid "Insert Text Column" msgstr "插入文字欄" #. tVACy #: chart2/uiconfig/ui/chartdatadialog.ui:113 msgctxt "chartdatadialog|extended_tip|InsertTextColumn" msgid "Inserts a new text column after the current column for hierarchical axes descriptions." msgstr "在階層式軸說明的目前欄之後，插入新的文字欄。" #. 4JgTE #: chart2/uiconfig/ui/chartdatadialog.ui:126 msgctxt "chartdatadialog|RemoveRow" msgid "Delete Row" msgstr "刪除列" #. DVMcX #: chart2/uiconfig/ui/chartdatadialog.ui:131 msgctxt "chartdatadialog|extended_tip|RemoveRow" msgid "Deletes the current row. It is not possible to delete the label row." msgstr "刪除目前列。無法刪除標籤列。" #. JCBmW #: chart2/uiconfig/ui/chartdatadialog.ui:144 msgctxt "chartdatadialog|RemoveColumn" msgid "Delete Series" msgstr "刪除資料序列" #. mSCiJ #: chart2/uiconfig/ui/chartdatadialog.ui:149 msgctxt "chartdatadialog|extended_tip|RemoveColumn" msgid "Deletes the current series or text column. It is not possible to delete the first text column." msgstr "刪除目前的序列或文字欄。但無法刪除第一個文字欄。" #. MUkk3 #: chart2/uiconfig/ui/chartdatadialog.ui:172 msgctxt "chartdatadialog|MoveLeftColumn" msgid "Move Series Left" msgstr "左移資料序列" #. V7UUB #: chart2/uiconfig/ui/chartdatadialog.ui:177 msgctxt "chartdatadialog|extended_tip|MoveLeftColumn" msgid "Switches the current column with its neighbor at the left." msgstr "" #. DfxQy #: chart2/uiconfig/ui/chartdatadialog.ui:190 msgctxt "chartdatadialog|MoveRightColumn" msgid "Move Series Right" msgstr "右移資料序列" #. JxZC8 #: chart2/uiconfig/ui/chartdatadialog.ui:195 msgctxt "chartdatadialog|extended_tip|MoveRightColumn" msgid "Switches the current column with its neighbor at the right." msgstr "切換目前欄與其相鄰右欄。" #. EkxKw #: chart2/uiconfig/ui/chartdatadialog.ui:208 msgctxt "chartdatadialog|MoveUpRow" msgid "Move Row Up" msgstr "上移列" #. DnZTt #: chart2/uiconfig/ui/chartdatadialog.ui:213 msgctxt "chartdatadialog|extended_tip|MoveUpRow" msgid "Switches the current row with its neighbor above." msgstr "" #. TvbuK #: chart2/uiconfig/ui/chartdatadialog.ui:226 msgctxt "chartdatadialog|MoveDownRow" msgid "Move Row Down" msgstr "下移列" #. u8jmj #: chart2/uiconfig/ui/chartdatadialog.ui:231 msgctxt "chartdatadialog|extended_tip|MoveDownRow" msgid "Switches the current row with its neighbor below." msgstr "切換目前列與其下一列的內容。" #. rRJDK #: chart2/uiconfig/ui/chartdatadialog.ui:337 msgctxt "chartdatadialog|extended_tip|ChartDataDialog" msgid "Opens the Data Table dialog where you can edit the chart data." msgstr "" #. KbkRw #: chart2/uiconfig/ui/charttypedialog.ui:8 msgctxt "charttypedialog|ChartTypeDialog" msgid "Chart Type" msgstr "圖表類型" #. 9AVY7 #: chart2/uiconfig/ui/datarangedialog.ui:8 msgctxt "datarangedialog|DataRangeDialog" msgid "Data Ranges" msgstr "資料範圍" #. PqEvS #: chart2/uiconfig/ui/datarangedialog.ui:124 msgctxt "datarangedialog|range" msgid "Data Range" msgstr "資料範圍" #. YmqFB #: chart2/uiconfig/ui/datarangedialog.ui:170 msgctxt "datarangedialog|series" msgid "Data Series" msgstr "資料序列" #. H6ezZ #: chart2/uiconfig/ui/dlg_DataLabel.ui:13 msgctxt "dlg_DataLabel|dlg_DataLabels" msgid "Data Labels for all Data Series" msgstr "所有資料序列的資料標籤" #. ouq6P #: chart2/uiconfig/ui/dlg_DataLabel.ui:105 msgctxt "dlg_DataLabel|CB_VALUE_AS_NUMBER" msgid "Show value as _number" msgstr "值顯示為數字(_N)" #. sDLeD #: chart2/uiconfig/ui/dlg_DataLabel.ui:114 msgctxt "dlg_DataLabel|extended_tip|CB_VALUE_AS_NUMBER" msgid "Displays the absolute values of the data points." msgstr "顯示資料點的絕對數值。" #. C2XXx #: chart2/uiconfig/ui/dlg_DataLabel.ui:125 msgctxt "dlg_DataLabel|CB_VALUE_AS_PERCENTAGE" msgid "Show value as _percentage" msgstr "值顯示為百分比(_P)" #. 5Hp8E #: chart2/uiconfig/ui/dlg_DataLabel.ui:134 msgctxt "dlg_DataLabel|extended_tip|CB_VALUE_AS_PERCENTAGE" msgid "Displays the percentage of the data points in each column." msgstr "在每欄中顯示資料點的百分比。" #. MYzUe #: chart2/uiconfig/ui/dlg_DataLabel.ui:145 msgctxt "dlg_DataLabel|CB_CATEGORY" msgid "Show _category" msgstr "顯示類別(_C)" #. oJGQF #: chart2/uiconfig/ui/dlg_DataLabel.ui:154 msgctxt "dlg_DataLabel|extended_tip|CB_CATEGORY" msgid "Shows the data point text labels." msgstr "顯示資料點文字貼標。" #. 8mMDV #: chart2/uiconfig/ui/dlg_DataLabel.ui:165 msgctxt "dlg_DataLabel|CB_SYMBOL" msgid "Show _legend key" msgstr "顯示圖例(_L)" #. 7WADc #: chart2/uiconfig/ui/dlg_DataLabel.ui:174 msgctxt "dlg_DataLabel|extended_tip|CB_SYMBOL" msgid "Displays the legend icons next to each data point label." msgstr "在每個資料點貼標旁顯示圖例圖示。" #. BA3kD #: chart2/uiconfig/ui/dlg_DataLabel.ui:185 msgctxt "dlg_DataLabel|CB_WRAP_TEXT" msgid "Auto text _wrap" msgstr "文字自動折行(_W)" #. bFd8g #: chart2/uiconfig/ui/dlg_DataLabel.ui:200 msgctxt "dlg_DataLabel|PB_NUMBERFORMAT" msgid "Number _format..." msgstr "數字格式(_F)..." #. yHa5z #: chart2/uiconfig/ui/dlg_DataLabel.ui:208 msgctxt "dlg_DataLabel|extended_tip|PB_NUMBERFORMAT" msgid "Opens a dialog to select the number format." msgstr "開啟對話方塊以選取數字格式。" #. cFD6D #: chart2/uiconfig/ui/dlg_DataLabel.ui:219 msgctxt "dlg_DataLabel|PB_PERCENT_NUMBERFORMAT" msgid "Percentage f_ormat..." msgstr "百分比格式(_O)..." #. Wj42y #: chart2/uiconfig/ui/dlg_DataLabel.ui:227 msgctxt "dlg_DataLabel|extended_tip|PB_PERCENT_NUMBERFORMAT" msgid "Opens a dialog to select the percentage format." msgstr "開啟對話方塊以選取百分比格式。" #. ETbFx #: chart2/uiconfig/ui/dlg_DataLabel.ui:240 msgctxt "dlg_DataLabel|CT_LABEL_DIAL" msgid "ABCD" msgstr "ABCD" #. NvbuM #: chart2/uiconfig/ui/dlg_DataLabel.ui:259 msgctxt "dlg_DataLabel|FT_TEXT_SEPARATOR" msgid "_Separator" msgstr "分隔符號(_S)" #. m8qsr #: chart2/uiconfig/ui/dlg_DataLabel.ui:276 msgctxt "dlg_DataLabel|liststoreSEPARATOR" msgid "Space" msgstr "空格" #. d6M3S #: chart2/uiconfig/ui/dlg_DataLabel.ui:277 msgctxt "dlg_DataLabel|liststoreSEPARATOR" msgid "Comma" msgstr "逗號" #. HUBkD #: chart2/uiconfig/ui/dlg_DataLabel.ui:278 msgctxt "dlg_DataLabel|liststoreSEPARATOR" msgid "Semicolon" msgstr "分號" #. 3CaCX #: chart2/uiconfig/ui/dlg_DataLabel.ui:279 msgctxt "dlg_DataLabel|liststoreSEPARATOR" msgid "New line" msgstr "新行" #. CAtwB #: chart2/uiconfig/ui/dlg_DataLabel.ui:280 msgctxt "dlg_DataLabel|liststoreSEPARATOR" msgid "Period" msgstr "句號" #. 8Z3DJ #: chart2/uiconfig/ui/dlg_DataLabel.ui:284 msgctxt "dlg_DataLabel|extended_tip|LB_TEXT_SEPARATOR" msgid "Selects the separator between multiple text strings for the same object." msgstr "選取相同物件的多個文字字串之間的分隔符。" #. FDBQW #: chart2/uiconfig/ui/dlg_DataLabel.ui:310 msgctxt "dlg_DataLabel|FT_LABEL_PLACEMENT" msgid "Place_ment" msgstr "取代(_P)" #. RBvRC #: chart2/uiconfig/ui/dlg_DataLabel.ui:327 msgctxt "dlg_DataLabel|liststorePLACEMENT" msgid "Best fit" msgstr "自動調整" #. CFGTS #: chart2/uiconfig/ui/dlg_DataLabel.ui:328 msgctxt "dlg_DataLabel|liststorePLACEMENT" msgid "Center" msgstr "置中" #. kxNDG #: chart2/uiconfig/ui/dlg_DataLabel.ui:329 msgctxt "dlg_DataLabel|liststorePLACEMENT" msgid "Above" msgstr "上" #. dnhiD #: chart2/uiconfig/ui/dlg_DataLabel.ui:330 msgctxt "dlg_DataLabel|liststorePLACEMENT" msgid "Top left" msgstr "左上" #. TGuEk #: chart2/uiconfig/ui/dlg_DataLabel.ui:331 msgctxt "dlg_DataLabel|liststorePLACEMENT" msgid "Left" msgstr "左" #. eUxTR #: chart2/uiconfig/ui/dlg_DataLabel.ui:332 msgctxt "dlg_DataLabel|liststorePLACEMENT" msgid "Bottom left" msgstr "左下" #. CGQj7 #: chart2/uiconfig/ui/dlg_DataLabel.ui:333 msgctxt "dlg_DataLabel|liststorePLACEMENT" msgid "Below" msgstr "下" #. UJ7uQ #: chart2/uiconfig/ui/dlg_DataLabel.ui:334 msgctxt "dlg_DataLabel|liststorePLACEMENT" msgid "Bottom right" msgstr "右下" #. nEFuG #: chart2/uiconfig/ui/dlg_DataLabel.ui:335 msgctxt "dlg_DataLabel|liststorePLACEMENT" msgid "Right" msgstr "右" #. NQCGE #: chart2/uiconfig/ui/dlg_DataLabel.ui:336 msgctxt "dlg_DataLabel|liststorePLACEMENT" msgid "Top right" msgstr "右上" #. UagUt #: chart2/uiconfig/ui/dlg_DataLabel.ui:337 msgctxt "dlg_DataLabel|liststorePLACEMENT" msgid "Inside" msgstr "內" #. y25DL #: chart2/uiconfig/ui/dlg_DataLabel.ui:338 msgctxt "dlg_DataLabel|liststorePLACEMENT" msgid "Outside" msgstr "外" #. 3HjyB #: chart2/uiconfig/ui/dlg_DataLabel.ui:339 msgctxt "dlg_DataLabel|liststorePLACEMENT" msgid "Near origin" msgstr "靠近原點" #. TMEug #: chart2/uiconfig/ui/dlg_DataLabel.ui:343 msgctxt "dlg_DataLabel|extended_tip|LB_LABEL_PLACEMENT" msgid "Selects the placement of data labels relative to the objects." msgstr "選取物件的相對資料標籤位置。" #. 69qZL #: chart2/uiconfig/ui/dlg_DataLabel.ui:363 msgctxt "dlg_DataLabel|STR_DLG_NUMBERFORMAT_FOR_PERCENTAGE_VALUE" msgid "Number Format for Percentage Value" msgstr "百分比值的數字格式" #. mFeMA #: chart2/uiconfig/ui/dlg_DataLabel.ui:381 msgctxt "dlg_DataLabel|label1" msgid "Text Attributes" msgstr "文字特性" #. gE7CA #: chart2/uiconfig/ui/dlg_DataLabel.ui:425 msgctxt "dlg_DataLabel|extended_tip|CT_DIAL" msgid "Click in the dial to set the text orientation for the data labels." msgstr "在刻度盤中按一下以設定資料標籤的文字方向。" #. MjCoG #: chart2/uiconfig/ui/dlg_DataLabel.ui:445 msgctxt "dlg_DataLabel|extended_tip|NF_LABEL_DEGREES" msgid "Enter the counterclockwise rotation angle for the data labels." msgstr "" #. Jhjwb #: chart2/uiconfig/ui/dlg_DataLabel.ui:459 msgctxt "dlg_DataLabel|FT_LABEL_DEGREES" msgid "_Degrees" msgstr "度(_D)" #. vtVy2 #: chart2/uiconfig/ui/dlg_DataLabel.ui:484 msgctxt "dlg_DataLabel|FT_LABEL_TEXTDIR" msgid "Te_xt direction" msgstr "文字方向(_X)" #. tjcHp #: chart2/uiconfig/ui/dlg_DataLabel.ui:501 msgctxt "dlg_DataLabel|extended_tip|LB_LABEL_TEXTDIR" msgid "Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled." msgstr "指定使用複合文字版面配置 (CTL) 段落的文字方向。除非已啟用複合文字版面配置，否則無法使用此功能。" #. xpAEz #: chart2/uiconfig/ui/dlg_DataLabel.ui:526 msgctxt "dlg_DataLabel|label2" msgid "Rotate Text" msgstr "旋轉文字" #. 6bBph #: chart2/uiconfig/ui/dlg_DataLabel.ui:542 msgctxt "dlg_DataLabel|extended_tip|tp_DataLabel" msgid "Opens the Data Labels dialog, which enables you to set the data labels." msgstr "開啟 [資料標籤] 對話方塊，該對話方塊可讓您設定資料標籤。" #. bt7D7 #: chart2/uiconfig/ui/dlg_DataLabel.ui:564 msgctxt "dlg_DataLabel|extended_tip|dlg_DataLabels" msgid "Opens the Data Labels dialog, which enables you to set the data labels." msgstr "開啟 [資料標籤] 對話方塊，該對話方塊可讓您設定資料標籤。" #. 3GUtp #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:28 msgctxt "dlg_InsertErrorBars|dlg_InsertErrorBars" msgid "Legend" msgstr "圖例" #. 9Wf9T #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:128 msgctxt "dlg_InsertErrorBars|RB_NONE" msgid "_None" msgstr "無(_N)" #. pvfsb #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:137 msgctxt "dlg_InsertErrorBars|extended_tip|RB_NONE" msgid "Does not show any error bars." msgstr "" #. sMZoy #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:149 msgctxt "dlg_InsertErrorBars|RB_CONST" msgid "_Constant Value" msgstr "恆定值(_C)" #. oDzF5 #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:159 msgctxt "dlg_InsertErrorBars|extended_tip|RB_CONST" msgid "Displays constant values that you specify in the Parameters area." msgstr "" #. UzxQQ #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:171 msgctxt "dlg_InsertErrorBars|RB_PERCENT" msgid "_Percentage" msgstr "百分比(_P)" #. bGDm2 #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:181 msgctxt "dlg_InsertErrorBars|extended_tip|RB_PERCENT" msgid "Displays a percentage. The display refers to the corresponding data point. Set the percentage in the Parameters area." msgstr "" #. tSBH9 #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:207 msgctxt "dlg_InsertErrorBars|extended_tip|RB_FUNCTION" msgid "Select a function to calculate the error bars." msgstr "選取函式以計算誤差線。" #. fkUNn #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:222 msgctxt "dlg_InsertErrorBars|liststoreFUNCTION" msgid "Standard Error" msgstr "標準誤" #. zpc6d #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:223 msgctxt "dlg_InsertErrorBars|liststoreFUNCTION" msgid "Standard Deviation" msgstr "標準差" #. wA6LE #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:224 msgctxt "dlg_InsertErrorBars|liststoreFUNCTION" msgid "Variance" msgstr "變異數" #. UASm3 #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:225 msgctxt "dlg_InsertErrorBars|liststoreFUNCTION" msgid "Error Margin" msgstr "誤差邊緣" #. vqTAT #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:229 msgctxt "dlg_InsertErrorBars|extended_tip|LB_FUNCTION" msgid "Select a function to calculate the error bars." msgstr "選取函式以計算誤差線。" #. Z5yGF #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:248 msgctxt "dlg_InsertErrorBars|RB_RANGE" msgid "Cell _Range" msgstr "儲存格範圍(_R)" #. Vm5iS #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:258 msgctxt "dlg_InsertErrorBars|extended_tip|RB_RANGE" msgid "Click Cell Range and then specify a cell range from which to take the positive and negative error bar values." msgstr "按一下 [儲存格範圍]，然後指定要從中擷取正誤差線值與負誤差線值的儲存格範圍。" #. vdvVR #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:276 msgctxt "dlg_InsertErrorBars|label1" msgid "Error Category" msgstr "誤差類別" #. oZaa3 #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:309 msgctxt "dlg_InsertErrorBars|RB_BOTH" msgid "Positive _and Negative" msgstr "正數與負數(_A)" #. aAhky #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:318 msgctxt "dlg_InsertErrorBars|extended_tip|RB_BOTH" msgid "Shows positive and negative error bars." msgstr "顯示正誤差線與負誤差線。" #. jJw8Y #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:329 msgctxt "dlg_InsertErrorBars|RB_POSITIVE" msgid "Pos_itive" msgstr "正數(_I)" #. yXXuP #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:339 msgctxt "dlg_InsertErrorBars|extended_tip|RB_POSITIVE" msgid "Shows only positive error bars." msgstr "僅顯示正誤差線。" #. 6YgbM #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:350 msgctxt "dlg_InsertErrorBars|RB_NEGATIVE" msgid "Ne_gative" msgstr "負數(_G)" #. KsYHq #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:360 msgctxt "dlg_InsertErrorBars|extended_tip|RB_NEGATIVE" msgid "Shows only negative error bars." msgstr "僅顯示負誤差線。" #. fkKQH #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:410 msgctxt "dlg_InsertErrorBars|label2" msgid "Error Indicator" msgstr "誤差指示符" #. WWuZ8 #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:458 msgctxt "dlg_InsertErrorBars|FT_POSITIVE" msgid "P_ositive (+)" msgstr "正 (+)(_O)" #. EHq4d #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:476 msgctxt "dlg_InsertErrorBars|extended_tip|MF_POSITIVE" msgid "Enter the value to add to the displayed value as the positive error value." msgstr "輸入要加到顯示值的值，作為正誤差值。" #. SUBEs #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:494 msgctxt "dlg_InsertErrorBars|extended_tip|ED_RANGE_POSITIVE" msgid "Enter the address range from where to get the positive error values. Use the Shrink button to select the range from a sheet." msgstr "輸入要取得正誤差值的位址範圍。使用 [收縮] 按鈕從工作表中選取範圍。" #. 5FfdH #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:509 msgctxt "dlg_InsertErrorBars|IB_RANGE_POSITIVE|tooltip_text" msgid "Select data range" msgstr "選取資料範圍" #. JYk3c #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:513 msgctxt "dlg_InsertErrorBars|extended_tip|IB_RANGE_POSITIVE" msgid "Click a button to shrink the dialog, then use the mouse to select the cell range in the spreadsheet. Click the button again to restore the dialog to full size." msgstr "按一下按鈕可縮小對話方塊，然後使用滑鼠選取試算表中的儲存格範圍。再按一下按鈕可將對話方塊復原為完整大小。" #. K9wAk #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:539 msgctxt "dlg_InsertErrorBars|FT_NEGATIVE" msgid "_Negative (-)" msgstr "負 (-)(_N)" #. Hzr6X #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:557 msgctxt "dlg_InsertErrorBars|extended_tip|MF_NEGATIVE" msgid "Enter the value to subtract from the displayed value as the negative error value." msgstr "輸入要從顯示值減去的值，作為負誤差值。" #. DTR5D #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:575 msgctxt "dlg_InsertErrorBars|extended_tip|ED_RANGE_NEGATIVE" msgid "Enter the address range from where to get the negative error values. Use the Shrink button to select the range from a sheet." msgstr "輸入要取得負誤差值的位址範圍。使用 [收縮] 按鈕從工作表中選取範圍。" #. jsckc #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:590 msgctxt "dlg_InsertErrorBars|IB_RANGE_NEGATIVE|tooltip_text" msgid "Select data range" msgstr "選取資料範圍" #. mEwUr #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:594 msgctxt "dlg_InsertErrorBars|extended_tip|IB_RANGE_NEGATIVE" msgid "Click a button to shrink the dialog, then use the mouse to select the cell range in the spreadsheet. Click the button again to restore the dialog to full size." msgstr "按一下按鈕可縮小對話方塊，然後使用滑鼠選取試算表中的儲存格範圍。再按一下按鈕可將對話方塊復原為完整大小。" #. GZS6d #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:613 msgctxt "dlg_InsertErrorBars|CB_SYN_POS_NEG" msgid "Same value for both" msgstr "兩者同值" #. wTppD #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:622 msgctxt "dlg_InsertErrorBars|extended_tip|CB_SYN_POS_NEG" msgid "Enable to use the positive error values also as negative error values. You can only change the value of the \"Positive (+)\" box. That value gets copied to the \"Negative (-)\" box automatically." msgstr "" #. ogVMg #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:640 msgctxt "dlg_InsertErrorBars|label3" msgid "Parameters" msgstr "參數" #. MXxxE #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:657 msgctxt "dlg_InsertErrorBars|STR_DATA_SELECT_RANGE_FOR_POSITIVE_ERRORBARS" msgid "Select Range for Positive Error Bars" msgstr "選取正誤差線的範圍" #. ixAQm #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:668 msgctxt "dlg_InsertErrorBars|STR_DATA_SELECT_RANGE_FOR_NEGATIVE_ERRORBARS" msgid "Select Range for Negative Error Bars" msgstr "選取負誤差線的範圍" #. 68LFy #: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:679 msgctxt "dlg_InsertErrorBars|STR_CONTROLTEXT_ERROR_BARS_FROM_DATA" msgid "From Data Table" msgstr "從資料表格" #. 3G3Jo #: chart2/uiconfig/ui/dlg_InsertLegend.ui:8 msgctxt "dlg_InsertLegend|dlg_InsertLegend" msgid "Legend" msgstr "圖例" #. TQUNp #: chart2/uiconfig/ui/dlg_InsertLegend.ui:106 msgctxt "dlg_InsertLegend|show" msgid "_Display legend" msgstr "顯示圖例(_D)" #. BbrEG #: chart2/uiconfig/ui/dlg_InsertLegend.ui:128 msgctxt "dlg_InsertLegend|left" msgid "_Left" msgstr "左(_L)" #. EdZ7j #: chart2/uiconfig/ui/dlg_InsertLegend.ui:144 msgctxt "dlg_InsertLegend|right" msgid "_Right" msgstr "右(_R)" #. PoZ9R #: chart2/uiconfig/ui/dlg_InsertLegend.ui:160 msgctxt "dlg_InsertLegend|top" msgid "_Top" msgstr "上(_T)" #. Uvcht #: chart2/uiconfig/ui/dlg_InsertLegend.ui:176 msgctxt "dlg_InsertLegend|bottom" msgid "_Bottom" msgstr "下(_B)" #. bxdb5 #: chart2/uiconfig/ui/dlg_InsertLegend.ui:205 msgctxt "dlg_InsertLegend|TXT_POSITION" msgid "Position" msgstr "位置" #. FAEct #: chart2/uiconfig/ui/insertaxisdlg.ui:8 msgctxt "insertaxisdlg|InsertAxisDialog" msgid "Axes" msgstr "軸" #. 4Drc8 #: chart2/uiconfig/ui/insertaxisdlg.ui:107 msgctxt "insertaxisdlg|primaryX" msgid "_X axis" msgstr "_X 軸" #. QyAAw #: chart2/uiconfig/ui/insertaxisdlg.ui:116 msgctxt "insertaxisdlg|extended_tip|primaryX" msgid "Displays the X axis as a line with subdivisions." msgstr "顯示 X 軸為具有線點間隔的線。" #. XeWVu #: chart2/uiconfig/ui/insertaxisdlg.ui:128 msgctxt "insertaxisdlg|primaryY" msgid "_Y axis" msgstr "_Y 軸" #. 8ZzUp #: chart2/uiconfig/ui/insertaxisdlg.ui:137 msgctxt "insertaxisdlg|extended_tip|primaryY" msgid "Displays the Y axis as a line with subdivisions." msgstr "顯示 Y 軸為具有線點間隔的線。" #. FoAXW #: chart2/uiconfig/ui/insertaxisdlg.ui:149 msgctxt "insertaxisdlg|primaryZ" msgid "_Z axis" msgstr "_Z 軸" #. DgjxB #: chart2/uiconfig/ui/insertaxisdlg.ui:158 msgctxt "insertaxisdlg|extended_tip|primaryZ" msgid "Displays the Z axis as a line with subdivisions." msgstr "顯示 Z 軸為具有線點間隔的線。" #. YZ7GG #: chart2/uiconfig/ui/insertaxisdlg.ui:177 msgctxt "insertaxisdlg|label1" msgid "Axes" msgstr "軸" #. WEUFf #: chart2/uiconfig/ui/insertaxisdlg.ui:212 msgctxt "insertaxisdlg|secondaryX" msgid "X _axis" msgstr "X 軸(_A)" #. JGQhE #: chart2/uiconfig/ui/insertaxisdlg.ui:221 msgctxt "insertaxisdlg|extended_tip|secondaryX" msgid "Displays a secondary X axis in the chart." msgstr "在圖表中顯示輔助 X 軸。" #. 598Gk #: chart2/uiconfig/ui/insertaxisdlg.ui:233 msgctxt "insertaxisdlg|secondaryY" msgid "Y ax_is" msgstr "Y 軸(_I)" #. trDFK #: chart2/uiconfig/ui/insertaxisdlg.ui:242 msgctxt "insertaxisdlg|extended_tip|secondaryY" msgid "The major axis and the secondary axis can have different scaling. For example, you can scale one axis to 2 in. and the other to 1.5 in. " msgstr "主軸與輔助軸可具有不同的顯示比例。例如，可將一個軸的顯示比例調整為 2 英吋，而將另一個軸的顯示比例調整為 1.5 英吋。" #. CAFjD #: chart2/uiconfig/ui/insertaxisdlg.ui:254 msgctxt "insertaxisdlg|secondaryZ" msgid "Z axi_s" msgstr "Z 軸(_S)" #. 2LQwV #: chart2/uiconfig/ui/insertaxisdlg.ui:277 msgctxt "insertaxisdlg|label2" msgid "Secondary Axes" msgstr "次軸" #. 7yEDE #: chart2/uiconfig/ui/insertaxisdlg.ui:309 msgctxt "insertaxisdlg|extended_tip|InsertAxisDialog" msgid "Specifies the axes to be displayed in the chart." msgstr "指定要在圖表中顯示的軸。" #. 2eGKS #: chart2/uiconfig/ui/insertgriddlg.ui:8 msgctxt "insertgriddlg|InsertGridDialog" msgid "Grids" msgstr "格線" #. adEgJ #: chart2/uiconfig/ui/insertgriddlg.ui:107 msgctxt "insertgriddlg|primaryX" msgid "_X axis" msgstr "_X 軸" #. TeVcH #: chart2/uiconfig/ui/insertgriddlg.ui:116 msgctxt "insertgriddlg|extended_tip|primaryX" msgid "Adds gridlines to the X axis of the chart." msgstr "為圖表中的 X 軸加入格線。" #. FEBZW #: chart2/uiconfig/ui/insertgriddlg.ui:128 msgctxt "insertgriddlg|primaryY" msgid "_Y axis" msgstr "_Y 軸" #. 6SmKJ #: chart2/uiconfig/ui/insertgriddlg.ui:137 msgctxt "insertgriddlg|extended_tip|primaryY" msgid "Adds gridlines to the Y axis of the chart." msgstr "為圖表中的 Y 軸加入格線。" #. XEXTu #: chart2/uiconfig/ui/insertgriddlg.ui:149 msgctxt "insertgriddlg|primaryZ" msgid "_Z axis" msgstr "_Z 軸" #. bF4Eb #: chart2/uiconfig/ui/insertgriddlg.ui:158 msgctxt "insertgriddlg|extended_tip|primaryZ" msgid "Adds gridlines to the Z axis of the chart." msgstr "為圖表中的 Z 軸加入格線。" #. 9QbAA #: chart2/uiconfig/ui/insertgriddlg.ui:177 msgctxt "insertgriddlg|label1" msgid "Major Grids" msgstr "主格線" #. wqXds #: chart2/uiconfig/ui/insertgriddlg.ui:212 msgctxt "insertgriddlg|secondaryX" msgid "X _axis" msgstr "X 軸(_A)" #. cfAUn #: chart2/uiconfig/ui/insertgriddlg.ui:221 msgctxt "insertgriddlg|extended_tip|secondaryX" msgid "Adds gridlines that subdivide the X axis into smaller sections." msgstr "加入格線，將 X 軸細分成若干更小的區域。" #. PkzaY #: chart2/uiconfig/ui/insertgriddlg.ui:233 msgctxt "insertgriddlg|secondaryY" msgid "Y ax_is" msgstr "Y 軸(_I)" #. a3asH #: chart2/uiconfig/ui/insertgriddlg.ui:242 msgctxt "insertgriddlg|extended_tip|secondaryY" msgid "Adds gridlines that subdivide the Y axis into smaller sections." msgstr "加入格線，將 Y 軸細分成若干更小的區域。" #. CcCG8 #: chart2/uiconfig/ui/insertgriddlg.ui:254 msgctxt "insertgriddlg|secondaryZ" msgid "Z axi_s" msgstr "Z 軸(_S)" #. hcj99 #: chart2/uiconfig/ui/insertgriddlg.ui:263 msgctxt "insertgriddlg|extended_tip|secondaryZ" msgid "Adds gridlines that subdivide the Z axis into smaller sections." msgstr "加入格線，將 Z 軸細分成若干更小的區域。" #. QBQD4 #: chart2/uiconfig/ui/insertgriddlg.ui:282 msgctxt "insertgriddlg|label2" msgid "Minor Grids" msgstr "次格線" #. URB9E #: chart2/uiconfig/ui/insertgriddlg.ui:314 msgctxt "insertgriddlg|extended_tip|InsertGridDialog" msgid "You can divide the axes into sections by assigning gridlines to them. This allows you to get a better overview of the chart, especially if you are working with large charts." msgstr "您可為各軸指定網格線，將它們分成若干區段。如此可讓您更瞭解圖表，特別是在處理大型圖表時。" #. rqADt #: chart2/uiconfig/ui/inserttitledlg.ui:8 msgctxt "inserttitledlg|InsertTitleDialog" msgid "Titles" msgstr "題名" #. pAKf8 #: chart2/uiconfig/ui/inserttitledlg.ui:91 msgctxt "inserttitledlg|labelMainTitle" msgid "_Title" msgstr "題名(_T)" #. ZBgRn #: chart2/uiconfig/ui/inserttitledlg.ui:105 msgctxt "inserttitledlg|labelSubTitle" msgid "_Subtitle" msgstr "副題(_S)" #. aCRZ7 #: chart2/uiconfig/ui/inserttitledlg.ui:123 msgctxt "inserttitledlg|extended_tip|maintitle" msgid "Enter the desired title for the chart." msgstr "" #. 5eiq7 #: chart2/uiconfig/ui/inserttitledlg.ui:140 msgctxt "inserttitledlg|extended_tip|subtitle" msgid "Enter the desired subtitle for the chart." msgstr "" #. y8KiH #: chart2/uiconfig/ui/inserttitledlg.ui:178 msgctxt "inserttitledlg|labelPrimaryXaxis" msgid "_X axis" msgstr "_X 軸" #. RhsUT #: chart2/uiconfig/ui/inserttitledlg.ui:192 msgctxt "inserttitledlg|labelPrimaryYaxis" msgid "_Y axis" msgstr "_Y 軸" #. ypJFt #: chart2/uiconfig/ui/inserttitledlg.ui:206 msgctxt "inserttitledlg|labelPrimaryZaxis" msgid "_Z axis" msgstr "_Z 軸" #. qz8WP #: chart2/uiconfig/ui/inserttitledlg.ui:224 msgctxt "inserttitledlg|extended_tip|primaryXaxis" msgid "Enter the desired title for the X axis of the chart." msgstr "" #. 3m5Dk #: chart2/uiconfig/ui/inserttitledlg.ui:241 msgctxt "inserttitledlg|extended_tip|primaryYaxis" msgid "Enter the desired title for the Y axis of the chart." msgstr "" #. PY2EU #: chart2/uiconfig/ui/inserttitledlg.ui:258 msgctxt "inserttitledlg|extended_tip|primaryZaxis" msgid "Enter the desired title for the Z axis of the chart." msgstr "" #. aHvzY #: chart2/uiconfig/ui/inserttitledlg.ui:275 msgctxt "inserttitledlg|Axe" msgid "Axes" msgstr "軸" #. 8XRFP #: chart2/uiconfig/ui/inserttitledlg.ui:310 msgctxt "inserttitledlg|labelSecondaryXAxis" msgid "X _axis" msgstr "X 軸(_A)" #. Tq7G9 #: chart2/uiconfig/ui/inserttitledlg.ui:324 msgctxt "inserttitledlg|labelSecondaryYAxis" msgid "Y ax_is" msgstr "Y 軸(_I)" #. EsHDi #: chart2/uiconfig/ui/inserttitledlg.ui:342 msgctxt "inserttitledlg|extended_tip|secondaryXaxis" msgid "Enter the desired secondary title for the X axis of the chart." msgstr "" #. bnwti #: chart2/uiconfig/ui/inserttitledlg.ui:359 msgctxt "inserttitledlg|extended_tip|secondaryYaxis" msgid "Enter the desired secondary title for the Y axis of the chart." msgstr "" #. XvJwD #: chart2/uiconfig/ui/inserttitledlg.ui:376 msgctxt "inserttitledlg|label2" msgid "Secondary Axes" msgstr "次軸" #. Y96AE #: chart2/uiconfig/ui/inserttitledlg.ui:408 msgctxt "inserttitledlg|extended_tip|InsertTitleDialog" msgid "Opens a dialog to enter or modify the titles in a chart." msgstr "" #. 23FsQ #: chart2/uiconfig/ui/paradialog.ui:8 msgctxt "paradialog|ParagraphDialog" msgid "Paragraph" msgstr "段落" #. 6xRiy #: chart2/uiconfig/ui/paradialog.ui:134 msgctxt "paradialog|labelTP_PARA_STD" msgid "Indents & Spacing" msgstr "縮排和間距" #. PRo68 #: chart2/uiconfig/ui/paradialog.ui:180 msgctxt "paradialog|labelTP_PARA_ALIGN" msgid "Alignment" msgstr "對齊" #. EB5A9 #: chart2/uiconfig/ui/paradialog.ui:228 msgctxt "paradialog|labelTP_PARA_ASIAN" msgid "Asian Typography" msgstr "亞洲語言排版式樣" #. BzbWJ #: chart2/uiconfig/ui/paradialog.ui:275 msgctxt "paradialog|labelTP_TABULATOR" msgid "Tabs" msgstr "定位點" #. jEDem #: chart2/uiconfig/ui/sidebaraxis.ui:22 msgctxt "sidebaraxis|checkbutton_show_label" msgid "Show labels" msgstr "顯示標籤" #. 52BFU #: chart2/uiconfig/ui/sidebaraxis.ui:37 msgctxt "sidebaraxis|checkbutton_reverse" msgid "Reverse direction" msgstr "反轉方向" #. hABaw #: chart2/uiconfig/ui/sidebaraxis.ui:62 msgctxt "sidebaraxis|label1" msgid "_Label position:" msgstr "標籤位置(_L)：" #. JpV6N #: chart2/uiconfig/ui/sidebaraxis.ui:76 msgctxt "sidebaraxis|comboboxtext_label_position" msgid "Near Axis" msgstr "靠近軸" #. HEMNB #: chart2/uiconfig/ui/sidebaraxis.ui:77 msgctxt "sidebaraxis|comboboxtext_label_position" msgid "Near Axis (other side)" msgstr "靠近軸 (另一側)" #. BE2dT #: chart2/uiconfig/ui/sidebaraxis.ui:78 msgctxt "sidebaraxis|comboboxtext_label_position" msgid "Outside start" msgstr "起始之外" #. rH94z #: chart2/uiconfig/ui/sidebaraxis.ui:79 msgctxt "sidebaraxis|comboboxtext_label_position" msgid "Outside end" msgstr "結束之後" #. 69LSe #: chart2/uiconfig/ui/sidebaraxis.ui:93 msgctxt "sidebaraxis|label2" msgid "_Text orientation:" msgstr "文字方向(_T)：" #. HttnZ #: chart2/uiconfig/ui/sidebarelements.ui:35 msgctxt "sidebarelements|checkbutton_subtitle" msgid "Subtitle" msgstr "副題" #. Bqqg6 #: chart2/uiconfig/ui/sidebarelements.ui:50 msgctxt "sidebarelements|checkbutton_title" msgid "Title" msgstr "題名" #. vkhjB #: chart2/uiconfig/ui/sidebarelements.ui:71 msgctxt "sidebarelements|l" msgid "Titles" msgstr "題名" #. dB6pP #: chart2/uiconfig/ui/sidebarelements.ui:104 msgctxt "sidebarelements|checkbutton_legend" msgid "Show legend" msgstr "顯示圖例" #. XxG3r #: chart2/uiconfig/ui/sidebarelements.ui:108 msgctxt "sidebarelements|checkbutton_legend|tooltip_text" msgid "Show Legend" msgstr "顯示圖例" #. zszn2 #: chart2/uiconfig/ui/sidebarelements.ui:130 msgctxt "sidebarelements|placement_label" msgid "_Placement:" msgstr "位置(_P)：" #. N9Vw3 #: chart2/uiconfig/ui/sidebarelements.ui:146 msgctxt "sidebarelements|comboboxtext_legend" msgid "Right" msgstr "右" #. XWGfH #: chart2/uiconfig/ui/sidebarelements.ui:147 msgctxt "sidebarelements|comboboxtext_legend" msgid "Top" msgstr "上" #. AYbfc #: chart2/uiconfig/ui/sidebarelements.ui:148 msgctxt "sidebarelements|comboboxtext_legend" msgid "Bottom" msgstr "下" #. Hdrnv #: chart2/uiconfig/ui/sidebarelements.ui:149 msgctxt "sidebarelements|comboboxtext_legend" msgid "Left" msgstr "左" #. WxtCZ #: chart2/uiconfig/ui/sidebarelements.ui:167 msgctxt "sidebarelements|checkbutton_no_overlay" msgid "Show the legend without overlapping the chart" msgstr "顯示圖例且不和圖表重疊" #. UVbZR #: chart2/uiconfig/ui/sidebarelements.ui:189 msgctxt "sidebarelements|label_legen" msgid "Legend" msgstr "圖例" #. Am6Gz #: chart2/uiconfig/ui/sidebarelements.ui:222 msgctxt "sidebarelements|checkbutton_x_axis" msgid "X axis" msgstr "X 軸" #. P5gxx #: chart2/uiconfig/ui/sidebarelements.ui:237 msgctxt "sidebarelements|checkbutton_x_axis_title" msgid "X axis title" msgstr "X 軸題名" #. iMXPp #: chart2/uiconfig/ui/sidebarelements.ui:252 msgctxt "sidebarelements|checkbutton_y_axis" msgid "Y axis" msgstr "Y 軸" #. vF4oS #: chart2/uiconfig/ui/sidebarelements.ui:267 msgctxt "sidebarelements|checkbutton_y_axis_title" msgid "Y axis title" msgstr "Y 軸題名" #. A35cf #: chart2/uiconfig/ui/sidebarelements.ui:282 msgctxt "sidebarelements|checkbutton_z_axis" msgid "Z axis" msgstr "Z 軸" #. RZFAU #: chart2/uiconfig/ui/sidebarelements.ui:297 msgctxt "sidebarelements|checkbutton_z_axis_title" msgid "Z axis title" msgstr "Z 軸題名" #. GoJDH #: chart2/uiconfig/ui/sidebarelements.ui:312 msgctxt "sidebarelements|checkbutton_2nd_x_axis" msgid "2nd X axis" msgstr "第二 X 軸" #. nsoDZ #: chart2/uiconfig/ui/sidebarelements.ui:326 msgctxt "sidebarelements|checkbutton_2nd_x_axis_title" msgid "2nd X axis title" msgstr "第二 X 軸題名" #. bGsCM #: chart2/uiconfig/ui/sidebarelements.ui:340 msgctxt "sidebarelements|checkbutton_2nd_y_axis" msgid "2nd Y axis" msgstr "第二 Y 軸" #. yDNuy #: chart2/uiconfig/ui/sidebarelements.ui:354 msgctxt "sidebarelements|checkbutton_2nd_y_axis_title" msgid "2nd Y axis title" msgstr "第二 Y 軸題名" #. ScLEM #: chart2/uiconfig/ui/sidebarelements.ui:374 msgctxt "sidebarelements|label_axes" msgid "Axes" msgstr "軸" #. RL8AA #: chart2/uiconfig/ui/sidebarelements.ui:407 msgctxt "sidebarelements|checkbutton_gridline_horizontal_major" msgid "Horizontal major" msgstr "水平網格主線" #. FYBSZ #: chart2/uiconfig/ui/sidebarelements.ui:422 msgctxt "sidebarelements|checkbutton_gridline_vertical_major" msgid "Vertical major" msgstr "垂直網格主線" #. VCTTS #: chart2/uiconfig/ui/sidebarelements.ui:437 msgctxt "sidebarelements|checkbutton_gridline_horizontal_minor" msgid "Horizontal minor" msgstr "水平網格次線" #. QDFEZ #: chart2/uiconfig/ui/sidebarelements.ui:452 msgctxt "sidebarelements|checkbutton_gridline_vertical_minor" msgid "Vertical minor" msgstr "垂直網格次線" #. yeE2v #: chart2/uiconfig/ui/sidebarelements.ui:473 msgctxt "sidebarelements|label_gri" msgid "Gridlines" msgstr "格線" #. uacDo #: chart2/uiconfig/ui/sidebarelements.ui:493 msgctxt "sidebarelements|text_title" msgid "Title" msgstr "題名" #. jXGDE #: chart2/uiconfig/ui/sidebarelements.ui:504 msgctxt "sidebarelements|text_subtitle" msgid "Subtitle" msgstr "副題" #. SCPM4 #: chart2/uiconfig/ui/sidebarerrorbar.ui:58 msgctxt "sidebarerrorbar|label2" msgid "Category:" msgstr "類別：" #. 8Pb84 #: chart2/uiconfig/ui/sidebarerrorbar.ui:72 msgctxt "sidebarerrorbar|comboboxtext_type" msgid "Constant" msgstr "常數" #. Lz8Lo #: chart2/uiconfig/ui/sidebarerrorbar.ui:73 msgctxt "sidebarerrorbar|comboboxtext_type" msgid "Percentage" msgstr "百分比" #. Ap367 #: chart2/uiconfig/ui/sidebarerrorbar.ui:74 msgctxt "sidebarerrorbar|comboboxtext_type" msgid "Cell Range or Data Table" msgstr "儲存格範圍或資料表" #. Lqw6L #: chart2/uiconfig/ui/sidebarerrorbar.ui:75 msgctxt "sidebarerrorbar|comboboxtext_type" msgid "Standard deviation" msgstr "標準差" #. qUL78 #: chart2/uiconfig/ui/sidebarerrorbar.ui:76 msgctxt "sidebarerrorbar|comboboxtext_type" msgid "Standard error" msgstr "標準誤" #. KUCgB #: chart2/uiconfig/ui/sidebarerrorbar.ui:77 msgctxt "sidebarerrorbar|comboboxtext_type" msgid "Variance" msgstr "變異數" #. QDwJu #: chart2/uiconfig/ui/sidebarerrorbar.ui:78 msgctxt "sidebarerrorbar|comboboxtext_type" msgid "Error margin" msgstr "誤差邊緣" #. US82z #: chart2/uiconfig/ui/sidebarerrorbar.ui:91 msgctxt "sidebarerrorbar|label3" msgid "Positive (+):" msgstr "正 (+)：" #. NJdbG #: chart2/uiconfig/ui/sidebarerrorbar.ui:103 msgctxt "sidebarerrorbar|label4" msgid "Negative (-):" msgstr "負 (-)：" #. GBewc #: chart2/uiconfig/ui/sidebarerrorbar.ui:115 msgctxt "sidebarerrorbar|spinbutton_pos" msgid "0.00" msgstr "0.00" #. e3GvR #: chart2/uiconfig/ui/sidebarerrorbar.ui:129 msgctxt "sidebarerrorbar|spinbutton_neg" msgid "0.00" msgstr "0.00" #. 34Vax #: chart2/uiconfig/ui/sidebarerrorbar.ui:149 msgctxt "sidebarerrorbar|radiobutton_positive_negative|tooltip_text" msgid "Positive and Negative" msgstr "正數與負數" #. gETvJ #: chart2/uiconfig/ui/sidebarerrorbar.ui:167 msgctxt "sidebarerrorbar|radiobutton_positive|tooltip_text" msgid "Positive" msgstr "正數" #. 3Ur2d #: chart2/uiconfig/ui/sidebarerrorbar.ui:185 msgctxt "sidebarerrorbar|radiobutton_negative|tooltip_text" msgid "Negative" msgstr "負數" #. iCPU4 #: chart2/uiconfig/ui/sidebarerrorbar.ui:209 msgctxt "sidebarerrorbar|label5" msgid "Indicator" msgstr "指示器" #. qJBsd #: chart2/uiconfig/ui/sidebarseries.ui:44 msgctxt "sidebarseries|checkbutton_label" msgid "Show data labels" msgstr "顯示資料標籤" #. BsC9D #: chart2/uiconfig/ui/sidebarseries.ui:68 msgctxt "sidebarseries|label_box" msgid "P_lacement:" msgstr "位置(_L)：" #. Dk3GN #: chart2/uiconfig/ui/sidebarseries.ui:83 msgctxt "sidebarseries|comboboxtext_label" msgid "Above" msgstr "上" #. e4znD #: chart2/uiconfig/ui/sidebarseries.ui:84 msgctxt "sidebarseries|comboboxtext_label" msgid "Below" msgstr "下" #. CWwzt #: chart2/uiconfig/ui/sidebarseries.ui:85 msgctxt "sidebarseries|comboboxtext_label" msgid "Center" msgstr "置中" #. osWVq #: chart2/uiconfig/ui/sidebarseries.ui:86 msgctxt "sidebarseries|comboboxtext_label" msgid "Outside" msgstr "外" #. U3N4S #: chart2/uiconfig/ui/sidebarseries.ui:87 msgctxt "sidebarseries|comboboxtext_label" msgid "Inside" msgstr "內" #. pAmg7 #: chart2/uiconfig/ui/sidebarseries.ui:88 msgctxt "sidebarseries|comboboxtext_label" msgid "Near origin" msgstr "靠近原點" #. erC9C #: chart2/uiconfig/ui/sidebarseries.ui:113 msgctxt "sidebarseries|checkbutton_trendline" msgid "Show trendline" msgstr "顯示趨勢線" #. bXUND #: chart2/uiconfig/ui/sidebarseries.ui:149 msgctxt "sidebarseries|checkbutton_y_error" msgid "Y error bars" msgstr "Y 誤差線" #. zK6DE #: chart2/uiconfig/ui/sidebarseries.ui:165 msgctxt "sidebarseries|checkbutton_x_error" msgid "X error bars" msgstr "X 誤差線" #. FFPa2 #: chart2/uiconfig/ui/sidebarseries.ui:187 msgctxt "sidebarseries|label1" msgid "Error Bars" msgstr "誤差線" #. vhdnt #: chart2/uiconfig/ui/sidebarseries.ui:220 msgctxt "sidebarseries|radiobutton_primary_axis" msgid "Primary Y axis" msgstr "主 Y 軸" #. VPWVq #: chart2/uiconfig/ui/sidebarseries.ui:237 msgctxt "sidebarseries|radiobutton_secondary_axis" msgid "Secondary Y axis" msgstr "次 Y 軸" #. qE5HF #: chart2/uiconfig/ui/sidebarseries.ui:261 msgctxt "sidebarseries|axis_label" msgid "Align Series to Axis" msgstr "將資料序列對齊到軸" #. fvnkG #: chart2/uiconfig/ui/sidebarseries.ui:277 msgctxt "sidebarseries|label_series_tmpl" msgid "Data series '%1'" msgstr "資料序列「%1」" #. mZfrk #: chart2/uiconfig/ui/sidebartype.ui:81 msgctxt "sidebartype|3dlook" msgid "_3D Look" msgstr "_3D 外觀" #. mjrkY #: chart2/uiconfig/ui/sidebartype.ui:101 msgctxt "sidebartype|3dscheme" msgid "Simple" msgstr "簡單" #. urfc7 #: chart2/uiconfig/ui/sidebartype.ui:102 msgctxt "sidebartype|3dscheme" msgid "Realistic" msgstr "寫實" #. gYXXE #: chart2/uiconfig/ui/sidebartype.ui:123 msgctxt "sidebartype|shapeft" msgid "Sh_ape" msgstr "外型(_A)" #. B6KS5 #: chart2/uiconfig/ui/sidebartype.ui:184 msgctxt "sidebartype|stack" msgid "_Stack series" msgstr "堆疊序列(_S)" #. Yau6n #: chart2/uiconfig/ui/sidebartype.ui:208 msgctxt "sidebartype|ontop" msgid "On top" msgstr "在頂端" #. f2J43 #: chart2/uiconfig/ui/sidebartype.ui:223 msgctxt "sidebartype|percent" msgid "Percent" msgstr "百分比" #. iDSaa #: chart2/uiconfig/ui/sidebartype.ui:238 msgctxt "sidebartype|deep" msgid "Deep" msgstr "深層" #. KaS7Z #: chart2/uiconfig/ui/sidebartype.ui:268 msgctxt "sidebartype|linetypeft" msgid "_Line type" msgstr "線條類型(_L)" #. Hqc3N #: chart2/uiconfig/ui/sidebartype.ui:283 msgctxt "sidebartype|linetype" msgid "Straight" msgstr "長直" #. EB58Z #: chart2/uiconfig/ui/sidebartype.ui:284 msgctxt "sidebartype|linetype" msgid "Smooth" msgstr "平滑" #. qLn3k #: chart2/uiconfig/ui/sidebartype.ui:285 msgctxt "sidebartype|linetype" msgid "Stepped" msgstr "階狀" #. jKDXh #: chart2/uiconfig/ui/sidebartype.ui:295 msgctxt "sidebartype|properties" msgid "Properties..." msgstr "屬性..." #. xW9CQ #: chart2/uiconfig/ui/sidebartype.ui:313 msgctxt "sidebartype|sort" msgid "_Sort by X values" msgstr "依 X 值排序(_S)" #. thu3G #: chart2/uiconfig/ui/sidebartype.ui:335 msgctxt "sidebartype|nolinesft" msgid "_Number of lines" msgstr "線條的數目(_N)" #. Ledzw #: chart2/uiconfig/ui/smoothlinesdlg.ui:22 msgctxt "smoothlinesdlg|SmoothLinesDialog" msgid "Smooth Lines" msgstr "平滑線" #. vmRbz #: chart2/uiconfig/ui/smoothlinesdlg.ui:114 msgctxt "smoothlinesdlg|TypeLabel" msgid "Line _Type:" msgstr "線類型(_T)：" #. Nkqhi #: chart2/uiconfig/ui/smoothlinesdlg.ui:131 msgctxt "smoothlinesdlg|SplineTypeComboBox" msgid "Cubic spline" msgstr "立方樣條" #. LTCVw #: chart2/uiconfig/ui/smoothlinesdlg.ui:132 msgctxt "smoothlinesdlg|SplineTypeComboBox" msgid "B-spline" msgstr "B 樣條" #. EJdNq #: chart2/uiconfig/ui/smoothlinesdlg.ui:136 msgctxt "smoothlinesdlg|extended_tip|SplineTypeComboBox" msgid "Apply a line curve model." msgstr "" #. eecxc #: chart2/uiconfig/ui/smoothlinesdlg.ui:170 msgctxt "smoothlinesdlg|ResolutionLabel" msgid "_Resolution:" msgstr "解析度(_R)：" #. AdG5v #: chart2/uiconfig/ui/smoothlinesdlg.ui:184 msgctxt "smoothlinesdlg|PolynomialsLabel" msgid "_Degree of polynomials:" msgstr "多項式次數(_D)：" #. X35yY #: chart2/uiconfig/ui/smoothlinesdlg.ui:201 msgctxt "smoothlinesdlg|extended_tip|ResolutionSpinbutton" msgid "Set the resolution." msgstr "設定解析度。" #. a4btg #: chart2/uiconfig/ui/smoothlinesdlg.ui:218 msgctxt "smoothlinesdlg|extended_tip|PolynomialsSpinButton" msgid "Set the degree of the polynomials." msgstr "設定解析度。" #. YECJR #: chart2/uiconfig/ui/smoothlinesdlg.ui:252 msgctxt "smoothlinesdlg|extended_tip|SmoothLinesDialog" msgid "Apply a line curve model." msgstr "" #. RyJg5 #: chart2/uiconfig/ui/steppedlinesdlg.ui:131 msgctxt "steppedlinesdlg|step_start_rb" msgid "_Start with horizontal line" msgstr "以水平線開頭(_S)" #. Zcr4L #: chart2/uiconfig/ui/steppedlinesdlg.ui:141 msgctxt "steppedlinesdlg|extended_tip|step_start_rb" msgid "Start with horizontal line and step up vertically at the end." msgstr "" #. iJCAt #: chart2/uiconfig/ui/steppedlinesdlg.ui:152 msgctxt "steppedlinesdlg|step_center_x_rb" msgid "Step at the _horizontal mean" msgstr "於水平平均處升階(_H)" #. D5DGL #: chart2/uiconfig/ui/steppedlinesdlg.ui:163 msgctxt "steppedlinesdlg|extended_tip|step_center_x_rb" msgid "Start to step up vertically and end with horizontal line." msgstr "" #. vtGik #: chart2/uiconfig/ui/steppedlinesdlg.ui:174 msgctxt "steppedlinesdlg|step_end_rb" msgid "_End with horizontal line" msgstr "以水平線結尾(_E)" #. nGAhe #: chart2/uiconfig/ui/steppedlinesdlg.ui:185 msgctxt "steppedlinesdlg|extended_tip|step_end_rb" msgid "Start with horizontal line, step up vertically in the middle of the X values and end with horizontal line." msgstr "" #. X3536 #: chart2/uiconfig/ui/steppedlinesdlg.ui:196 msgctxt "steppedlinesdlg|step_center_y_rb" msgid "Step to the _vertical mean" msgstr "升階至垂直平均處(_V)" #. S528C #: chart2/uiconfig/ui/steppedlinesdlg.ui:207 msgctxt "steppedlinesdlg|extended_tip|step_center_y_rb" msgid "Start to step up vertically to the middle of the Y values, draw a horizontal line and finish by stepping vertically to the end." msgstr "" #. oDDMr #: chart2/uiconfig/ui/steppedlinesdlg.ui:235 msgctxt "steppedlinesdlg|label2" msgid "Type of Stepping" msgstr "階梯類型" #. K2DaE #: chart2/uiconfig/ui/titlerotationtabpage.ui:44 msgctxt "titlerotationtabpage|extended_tip|OrientDegree" msgid "Allows you to manually enter the orientation angle." msgstr "可讓您手動輸入對齊角度。" #. ViJ9k #: chart2/uiconfig/ui/titlerotationtabpage.ui:58 msgctxt "titlerotationtabpage|degreeL" msgid "_Degrees" msgstr "度(_D)" #. tv9xJ #: chart2/uiconfig/ui/titlerotationtabpage.ui:92 msgctxt "titlerotationtabpage|stackedCB" msgid "Ve_rtically stacked" msgstr "垂直堆疊(_R)" #. VGDph #: chart2/uiconfig/ui/titlerotationtabpage.ui:102 msgctxt "titlerotationtabpage|extended_tip|stackedCB" msgid "Assigns vertical text orientation for cell contents." msgstr "將儲存格內容指定為垂直文字方向。" #. 3BaMa #: chart2/uiconfig/ui/titlerotationtabpage.ui:114 msgctxt "titlerotationtabpage|labelABCD" msgid "ABCD" msgstr "ABCD" #. dAHWb #: chart2/uiconfig/ui/titlerotationtabpage.ui:131 msgctxt "titlerotationtabpage|textdirL" msgid "Te_xt direction:" msgstr "文字方向(_X)：" #. i5UYm #: chart2/uiconfig/ui/titlerotationtabpage.ui:145 msgctxt "titlerotationtabpage|extended_tip|textdirLB" msgid "Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled." msgstr "指定使用複合文字版面配置 (CTL) 段落的文字方向。除非已啟用複合文字版面配置，否則無法使用此功能。" #. 9cDiw #: chart2/uiconfig/ui/titlerotationtabpage.ui:164 msgctxt "titlerotationtabpage|extended_tip|dialCtrl" msgid "Clicking anywhere on the wheel defines the variable text orientation." msgstr "按一下輪上的任一處來定義可變文字方向。" #. syx89 #: chart2/uiconfig/ui/titlerotationtabpage.ui:181 msgctxt "titlerotationtabpage|labelTextOrient" msgid "Text Orientation" msgstr "文字方向" #. CDDxo #: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:20 msgctxt "tp_3D_SceneAppearance|FT_SCHEME" msgid "Sche_me" msgstr "方案(_M)" #. 4uCgf #: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:36 msgctxt "tp_3D_SceneAppearance|liststoreSCHEME" msgid "Simple" msgstr "簡單" #. uVRvv #: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:37 msgctxt "tp_3D_SceneAppearance|liststoreSCHEME" msgid "Realistic" msgstr "寫實" #. tFKjs #: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:38 msgctxt "tp_3D_SceneAppearance|liststoreSCHEME" msgid "Custom" msgstr "自訂" #. raML6 #: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:42 msgctxt "tp_3D_SceneAppearance|extended_tip|LB_SCHEME" msgid "Select a scheme from the list box, or click any of the check boxes below." msgstr "從清單方塊中選取模式，或按一下底下任何一個核取方塊。" #. EyGsf #: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:78 msgctxt "tp_3D_SceneAppearance|CB_SHADING" msgid "_Shading" msgstr "帶陰影(_S)" #. W68hV #: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:87 msgctxt "tp_3D_SceneAppearance|extended_tip|CB_SHADING" msgid "Applies Gouraud shading if marked, or flat shading if unmarked." msgstr "套用 Gouraud 陰影 (若有標記) 或平面陰影 (若無標記)。" #. SMFrD #: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:99 msgctxt "tp_3D_SceneAppearance|CB_OBJECTLINES" msgid "_Object borders" msgstr "物件邊框(_O)" #. CQjGV #: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:108 msgctxt "tp_3D_SceneAppearance|extended_tip|CB_OBJECTLINES" msgid "Shows borders around the areas by setting the line style to Solid." msgstr "將線條樣式設為實線以顯示平面周圍的邊框。" #. CpWRj #: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:120 msgctxt "tp_3D_SceneAppearance|CB_ROUNDEDEDGE" msgid "_Rounded edges" msgstr "圓角(_R)" #. c5pNB #: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:129 msgctxt "tp_3D_SceneAppearance|extended_tip|CB_ROUNDEDEDGE" msgid "Edges are rounded by 5%." msgstr "邊角變圓 5%。" #. U5CTF #: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:36 msgctxt "tp_3D_SceneGeometry|CBX_RIGHT_ANGLED_AXES" msgid "_Right-angled axes" msgstr "直角軸(_R)" #. QxmLn #: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:45 msgctxt "tp_3D_SceneGeometry|extended_tip|CBX_RIGHT_ANGLED_AXES" msgid "If Right-angled axes is enabled, you can rotate the chart contents only in X and Y direction, that is, parallel to the chart borders. Right-angled axes is enabled by default for newly created 3D charts. Pie and Donut charts do not support right-angled axes." msgstr "若啟用 [直角軸]，則僅能以 X 和 Y 方向旋轉圖表內容，亦即與圖表邊框同方向旋轉。新增的 3D 圖表預設會啟用 [直角軸]。圓形圖和環圈圖不支援直角軸。" #. y8Tyg #: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:59 msgctxt "tp_3D_SceneGeometry|FT_X_ROTATION" msgid "_X rotation" msgstr "_X 旋轉" #. TJ2Xp #: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:73 msgctxt "tp_3D_SceneGeometry|FT_Y_ROTATION" msgid "_Y rotation" msgstr "_Y 旋轉" #. UTAG5 #: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:87 msgctxt "tp_3D_SceneGeometry|FT_Z_ROTATION" msgid "_Z rotation" msgstr "_Z 旋轉" #. ZC8ZQ #: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:99 msgctxt "tp_3D_SceneGeometry|CBX_PERSPECTIVE" msgid "_Perspective" msgstr "透視法(_P)" #. xyePC #: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:111 msgctxt "tp_3D_SceneGeometry|extended_tip|CBX_PERSPECTIVE" msgid "Mark the Perspective box to view the chart as through a camera lens. Use the spin button to set the percentage. With a high percentage nearer objects look bigger than more distant objects." msgstr "標記 [透視] 方塊可以如同透過相機鏡頭般檢視圖表。使用微調按鈕可設定百分比。百分比愈高，較近的物件會比較遠的物件看起來愈大。" #. mdPAi #: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:131 msgctxt "tp_3D_SceneGeometry|MTR_FLD_PERSPECTIVE-atkobject" msgid "Perspective" msgstr "透視法" #. JECHC #: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:132 msgctxt "tp_3D_SceneGeometry|extended_tip|MTR_FLD_PERSPECTIVE" msgid "Mark the Perspective box to view the chart as through a camera lens. Use the spin button to set the percentage. With a high percentage nearer objects look bigger than more distant objects." msgstr "標記 [透視] 方塊可以如同透過相機鏡頭般檢視圖表。使用微調按鈕可設定百分比。百分比愈高，較近的物件會比較遠的物件看起來愈大。" #. PP8jT #: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:150 msgctxt "tp_3D_SceneGeometry|extended_tip|MTR_FLD_Z_ROTATION" msgid "Sets the rotation of the chart on the z axis. The preview responds to the new settings." msgstr "設定圖表在 Z 軸上旋轉。預覽會回應新設定。" #. AyMWn #: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:167 msgctxt "tp_3D_SceneGeometry|extended_tip|MTR_FLD_Y_ROTATION" msgid "Sets the rotation of the chart on the y axis. The preview responds to the new settings." msgstr "設定圖表在 Y 軸上旋轉。預覽會回應新設定。" #. EGS4B #: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:184 msgctxt "tp_3D_SceneGeometry|extended_tip|MTR_FLD_X_ROTATION" msgid "Sets the rotation of the chart on the x axis. The preview responds to the new settings." msgstr "設定圖表在 X 軸上旋轉。預覽會回應新設定。" #. RGQDC #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:95 msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_1|tooltip_text" msgid "Light source 1" msgstr "光源 1" #. EQb5g #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:100 msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_1" msgid "Click to enable or disable the specular light source with highlights." msgstr "按一下以啟用或停用高光反射光源。" #. bwfDH #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:114 msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_2|tooltip_text" msgid "Light source 2" msgstr "光源 2" #. jkJM8 #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:119 msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_2" msgid "Click to enable or disable the uniform light source." msgstr "按一下可啟用或停用一致的光源。" #. uMVDV #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:133 msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_3|tooltip_text" msgid "Light source 3" msgstr "光源 3" #. ZEUk7 #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:138 msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_3" msgid "Click to enable or disable the uniform light source." msgstr "按一下可啟用或停用一致的光源。" #. 6CBDG #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:152 msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_4|tooltip_text" msgid "Light source 4" msgstr "光源 4" #. X5ZD3 #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:157 msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_4" msgid "Click to enable or disable the uniform light source." msgstr "按一下可啟用或停用一致的光源。" #. Hf5Du #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:171 msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_5|tooltip_text" msgid "Light source 5" msgstr "光源 5" #. mUPX4 #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:176 msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_5" msgid "Click to enable or disable the uniform light source." msgstr "按一下可啟用或停用一致的光源。" #. T7qDZ #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:190 msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_6|tooltip_text" msgid "Light source 6" msgstr "光源 6" #. AAkx2 #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:195 msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_6" msgid "Click to enable or disable the uniform light source." msgstr "按一下可啟用或停用一致的光源。" #. mSsDD #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:209 msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_7|tooltip_text" msgid "Light source 7" msgstr "光源 7" #. Rh9Hz #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:214 msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_7" msgid "Click to enable or disable the uniform light source." msgstr "按一下可啟用或停用一致的光源。" #. wY5CR #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:228 msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_8|tooltip_text" msgid "Light source 8" msgstr "光源 8" #. EbsUA #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:233 msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_8" msgid "Click to enable or disable the uniform light source." msgstr "按一下可啟用或停用一致的光源。" #. DwEDc #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:266 msgctxt "tp_3D_SceneIllumination|extended_tip|LB_LIGHTSOURCE" msgid "Select a color for the selected light source." msgstr "為選定的光源選取顏色。" #. gfdAB #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:281 msgctxt "tp_3D_SceneIllumination|BTN_LIGHTSOURCE_COLOR|tooltip_text" msgid "Select a color using the color dialog" msgstr "使用色彩對話方塊選取色彩" #. JnBhP #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:285 msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHTSOURCE_COLOR" msgid "Select a color using the color dialog." msgstr "透過顏色對話方塊選取顏色。" #. XLXEQ #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:310 msgctxt "tp_3D_SceneIllumination|FT_LIGHTSOURCE" msgid "_Light source" msgstr "光源(_L)" #. WssJA #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:355 msgctxt "tp_3D_SceneIllumination|extended_tip|LB_AMBIENTLIGHT" msgid "Select a color for the ambient light." msgstr "為環境光線選取顏色。" #. NpAu7 #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:370 msgctxt "tp_3D_SceneIllumination|BTN_AMBIENT_COLOR|tooltip_text" msgid "Select a color using the color dialog" msgstr "使用色彩對話方塊選取色彩" #. 943Za #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:374 msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_AMBIENT_COLOR" msgid "Select a color using the color dialog." msgstr "透過顏色對話方塊選取顏色。" #. QCb7M #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:392 msgctxt "tp_3D_SceneIllumination|FT_AMBIENTLIGHT" msgid "_Ambient light" msgstr "周遭光(_A)" #. snUGf #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:435 msgctxt "tp_3D_SceneIllumination|CTL_LIGHT_PREVIEW|tooltip_text" msgid "Light Preview" msgstr "光照預覽" #. tQBhd #: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:493 msgctxt "tp_3D_SceneIllumination|extended_tip|tp_3D_SceneIllumination" msgid "Set the light sources for the 3D view." msgstr "" #. XRVrG #: chart2/uiconfig/ui/tp_AxisPositions.ui:48 msgctxt "tp_AxisPositions|FT_CROSSES_OTHER_AXIS_AT" msgid "_Cross other axis at" msgstr "與其他軸交錯於(_C)" #. Z734o #: chart2/uiconfig/ui/tp_AxisPositions.ui:64 msgctxt "tp_AxisPositions|LB_CROSSES_OTHER_AXIS_AT" msgid "Start" msgstr "起始" #. u6i7J #: chart2/uiconfig/ui/tp_AxisPositions.ui:65 msgctxt "tp_AxisPositions|LB_CROSSES_OTHER_AXIS_AT" msgid "End" msgstr "結束" #. vAUzq #: chart2/uiconfig/ui/tp_AxisPositions.ui:66 msgctxt "tp_AxisPositions|LB_CROSSES_OTHER_AXIS_AT" msgid "Value" msgstr "值" #. 5CSqT #: chart2/uiconfig/ui/tp_AxisPositions.ui:67 msgctxt "tp_AxisPositions|LB_CROSSES_OTHER_AXIS_AT" msgid "Category" msgstr "類別" #. eKYhk #: chart2/uiconfig/ui/tp_AxisPositions.ui:71 msgctxt "tp_AxisPositions|extended_tip|LB_CROSSES_OTHER_AXIS_AT" msgid "Select where to cross the other axis: at start, at end, at a specified value, or at a category." msgstr "選取要在何處與另一軸相交：在起點、在終點、在指定的值，或在某類別。" #. FwCEp #: chart2/uiconfig/ui/tp_AxisPositions.ui:89 msgctxt "tp_AxisPositions|extended_tip|EDT_CROSSES_OTHER_AXIS_AT" msgid "Enter the value where the axis line should cross the other axis." msgstr "輸入軸線要與另一軸相交處的值。" #. AnLbY #: chart2/uiconfig/ui/tp_AxisPositions.ui:112 msgctxt "tp_AxisPositions|extended_tip|EDT_CROSSES_OTHER_AXIS_AT_CATEGORY" msgid "Select the category where the axis line should cross the other axis." msgstr "輸入軸線要與另一軸相交處的類別。" #. VYVhe #: chart2/uiconfig/ui/tp_AxisPositions.ui:131 msgctxt "tp_AxisPositions|CB_AXIS_BETWEEN_CATEGORIES" msgid "Axis _between categories" msgstr "類別之間的軸(_B)" #. bW7T9 #: chart2/uiconfig/ui/tp_AxisPositions.ui:152 msgctxt "tp_AxisPositions|TXT_AXIS_LINE" msgid "Axis Line" msgstr "軸線" #. 5ezBt #: chart2/uiconfig/ui/tp_AxisPositions.ui:185 msgctxt "tp_AxisPositions|RB_ON" msgid "_On tick marks" msgstr "在刻度標記處(_O)" #. FaKJZ #: chart2/uiconfig/ui/tp_AxisPositions.ui:194 msgctxt "tp_AxisPositions|extended_tip|RB_ON" msgid "Specifies that the axis is positioned on the first/last tickmarks. This makes the data points visual representation begin/end at the value axis." msgstr "" #. gSFeZ #: chart2/uiconfig/ui/tp_AxisPositions.ui:205 msgctxt "tp_AxisPositions|RB_BETWEEN" msgid "_Between tick marks" msgstr "在刻度標記之間(_B)" #. BSx2x #: chart2/uiconfig/ui/tp_AxisPositions.ui:215 msgctxt "tp_AxisPositions|extended_tip|RB_BETWEEN" msgid "Specifies that the axis is positioned between the tickmarks. This makes the data points visual representation begin/end at a distance from the value axis." msgstr "" #. ExBDm #: chart2/uiconfig/ui/tp_AxisPositions.ui:232 msgctxt "tp_AxisPositions|TXT_POSITION" msgid "Position Axis" msgstr "坐落位置軸" #. 5AGbD #: chart2/uiconfig/ui/tp_AxisPositions.ui:273 msgctxt "tp_AxisPositions|FT_PLACE_LABELS" msgid "_Place labels" msgstr "放置標籤(_P)" #. GDk2L #: chart2/uiconfig/ui/tp_AxisPositions.ui:289 msgctxt "tp_AxisPositions|LB_PLACE_LABELS" msgid "Near axis" msgstr "靠近軸" #. ZWQzB #: chart2/uiconfig/ui/tp_AxisPositions.ui:290 msgctxt "tp_AxisPositions|LB_PLACE_LABELS" msgid "Near axis (other side)" msgstr "靠近軸 (另一側)" #. j3GGm #: chart2/uiconfig/ui/tp_AxisPositions.ui:291 msgctxt "tp_AxisPositions|LB_PLACE_LABELS" msgid "Outside start" msgstr "起始之外" #. mGDNr #: chart2/uiconfig/ui/tp_AxisPositions.ui:292 msgctxt "tp_AxisPositions|LB_PLACE_LABELS" msgid "Outside end" msgstr "結束之後" #. ChAqv #: chart2/uiconfig/ui/tp_AxisPositions.ui:296 msgctxt "tp_AxisPositions|extended_tip|LB_PLACE_LABELS" msgid "Select where to place the labels: near axis, near axis (other side), outside start, or outside end." msgstr "選取放置標籤之處：靠近軸、靠近軸 (另一端)、起點之外，或終點之外。" #. DUNn4 #: chart2/uiconfig/ui/tp_AxisPositions.ui:321 msgctxt "tp_AxisPositions|FT_AXIS_LABEL_DISTANCE" msgid "_Distance" msgstr "距離(_D)" #. Hkjze #: chart2/uiconfig/ui/tp_AxisPositions.ui:359 msgctxt "tp_AxisPositions|TXT_FL_LABELS" msgid "Labels" msgstr "標籤" #. YBk4g #: chart2/uiconfig/ui/tp_AxisPositions.ui:401 msgctxt "tp_AxisPositions|FT_MAJOR" msgid "Major:" msgstr "主：" #. G8MEU #: chart2/uiconfig/ui/tp_AxisPositions.ui:417 msgctxt "tp_AxisPositions|FT_MINOR" msgid "Minor:" msgstr "次：" #. UN6Pr #: chart2/uiconfig/ui/tp_AxisPositions.ui:431 msgctxt "tp_AxisPositions|CB_TICKS_INNER" msgid "_Inner" msgstr "內(_I)" #. DpVNk #: chart2/uiconfig/ui/tp_AxisPositions.ui:443 msgctxt "tp_AxisPositions|extended_tip|CB_TICKS_INNER" msgid "Specifies that marks are placed on the inner side of the axis." msgstr "指定將標記置於軸的內側。" #. EhLxm #: chart2/uiconfig/ui/tp_AxisPositions.ui:454 msgctxt "tp_AxisPositions|CB_TICKS_OUTER" msgid "_Outer" msgstr "外(_O)" #. DGWEb #: chart2/uiconfig/ui/tp_AxisPositions.ui:466 msgctxt "tp_AxisPositions|extended_tip|CB_TICKS_OUTER" msgid "Specifies that marks are placed on the outer side of the axis." msgstr "指定將標記置於軸的外側。" #. RJXic #: chart2/uiconfig/ui/tp_AxisPositions.ui:477 msgctxt "tp_AxisPositions|CB_MINOR_INNER" msgid "I_nner" msgstr "內(_N)" #. jbRx3 #: chart2/uiconfig/ui/tp_AxisPositions.ui:489 msgctxt "tp_AxisPositions|extended_tip|CB_MINOR_INNER" msgid "Specifies that minor interval marks are placed on the inner side of the axis." msgstr "指定將次要間隔標記置於軸的內側。" #. nBCFJ #: chart2/uiconfig/ui/tp_AxisPositions.ui:500 msgctxt "tp_AxisPositions|CB_MINOR_OUTER" msgid "O_uter" msgstr "外(_U)" #. JAi2f #: chart2/uiconfig/ui/tp_AxisPositions.ui:512 msgctxt "tp_AxisPositions|extended_tip|CB_MINOR_OUTER" msgid "Specifies that minor interval marks are placed on the outer side of the axis." msgstr "指定將次要間隔標記置於軸的外側。" #. XWuxR #: chart2/uiconfig/ui/tp_AxisPositions.ui:537 msgctxt "tp_AxisPositions|FT_PLACE_TICKS" msgid "Place _marks" msgstr "放置標記(_M)" #. mvGBB #: chart2/uiconfig/ui/tp_AxisPositions.ui:553 msgctxt "tp_AxisPositions|LB_PLACE_TICKS" msgid "At labels" msgstr "於標籤處" #. dGAYz #: chart2/uiconfig/ui/tp_AxisPositions.ui:554 msgctxt "tp_AxisPositions|LB_PLACE_TICKS" msgid "At axis" msgstr "於軸處" #. TJAJB #: chart2/uiconfig/ui/tp_AxisPositions.ui:555 msgctxt "tp_AxisPositions|LB_PLACE_TICKS" msgid "At axis and labels" msgstr "於軸與標籤處" #. tED2r #: chart2/uiconfig/ui/tp_AxisPositions.ui:559 msgctxt "tp_AxisPositions|extended_tip|LB_PLACE_TICKS" msgid "Select where to place the marks: at labels, at axis, or at axis and labels." msgstr "選取放置標記之處：在標籤上、在軸上，或在軸及標籤上。" #. jK9rf #: chart2/uiconfig/ui/tp_AxisPositions.ui:584 msgctxt "tp_AxisPositions|TXT_FL_TICKS" msgid "Interval Marks" msgstr "區間標記" #. 4Jp7G #: chart2/uiconfig/ui/tp_AxisPositions.ui:617 msgctxt "tp_AxisPositions|CB_MAJOR_GRID" msgid "Show major _grid" msgstr "顯示主格線(_G)" #. 7c2Hs #: chart2/uiconfig/ui/tp_AxisPositions.ui:633 msgctxt "tp_AxisPositions|CB_MINOR_GRID" msgid "_Show minor grid" msgstr "顯示次格線(_S)" #. Dp5Ar #: chart2/uiconfig/ui/tp_AxisPositions.ui:648 msgctxt "tp_AxisPositions|PB_MAJOR_GRID" msgid "Mo_re..." msgstr "更多(_R)..." #. k5VQQ #: chart2/uiconfig/ui/tp_AxisPositions.ui:661 msgctxt "tp_AxisPositions|PB_MINOR_GRID" msgid "Mor_e..." msgstr "更多(_E)..." #. 7eDLK #: chart2/uiconfig/ui/tp_AxisPositions.ui:681 msgctxt "tp_AxisPositions|label2" msgid "Grids" msgstr "格線" #. CUoe3 #: chart2/uiconfig/ui/tp_ChartType.ui:48 msgctxt "tp_ChartType|FT_CAPTION_FOR_WIZARD" msgid "Choose a Chart Type" msgstr "選擇圖表類型" #. wBFXQ #: chart2/uiconfig/ui/tp_ChartType.ui:94 msgctxt "tp_ChartType|extended_tip|subtype" msgid "Select a sub type of the basic chart type." msgstr "選取基本圖表類型的子類型。" #. FSf6b #: chart2/uiconfig/ui/tp_ChartType.ui:119 msgctxt "tp_ChartType|3dlook" msgid "_3D Look" msgstr "_3D 外觀" #. EB95g #: chart2/uiconfig/ui/tp_ChartType.ui:130 msgctxt "tp_ChartType|extended_tip|3dlook" msgid "Enables a 3D look for the data values." msgstr "啟用資料值的 3D 外觀。" #. FprGw #: chart2/uiconfig/ui/tp_ChartType.ui:144 msgctxt "tp_ChartType|3dscheme" msgid "Simple" msgstr "簡單" #. pKhfX #: chart2/uiconfig/ui/tp_ChartType.ui:145 msgctxt "tp_ChartType|3dscheme" msgid "Realistic" msgstr "寫實" #. zZxWG #: chart2/uiconfig/ui/tp_ChartType.ui:152 msgctxt "tp_ChartType|extended_tip|3dscheme" msgid "Select the type of 3D look." msgstr "選取 3D 外觀的類型。" #. FxHfq #: chart2/uiconfig/ui/tp_ChartType.ui:170 msgctxt "tp_ChartType|shapeft" msgid "Sh_ape" msgstr "外型(_A)" #. CCA3V #: chart2/uiconfig/ui/tp_ChartType.ui:213 msgctxt "tp_ChartType|extended_tip|shape" msgid "Select a shape from the list." msgstr "從清單中選取形狀。" #. G2u4D #: chart2/uiconfig/ui/tp_ChartType.ui:237 msgctxt "tp_ChartType|stack" msgid "_Stack series" msgstr "堆疊序列(_S)" #. h8wCq #: chart2/uiconfig/ui/tp_ChartType.ui:245 msgctxt "tp_ChartType|extended_tip|stack" msgid "Displays stacked series for Line charts." msgstr "顯示線條圖的堆疊序列。" #. KfD2L #: chart2/uiconfig/ui/tp_ChartType.ui:266 msgctxt "tp_ChartType|ontop" msgid "On top" msgstr "在頂端" #. DY854 #: chart2/uiconfig/ui/tp_ChartType.ui:275 msgctxt "tp_ChartType|extended_tip|ontop" msgid "Stack series display values on top of each other." msgstr "堆疊序列會顯示彼此互疊的值。" #. C7JxK #: chart2/uiconfig/ui/tp_ChartType.ui:286 msgctxt "tp_ChartType|percent" msgid "Percent" msgstr "百分比" #. EVNAR #: chart2/uiconfig/ui/tp_ChartType.ui:295 msgctxt "tp_ChartType|extended_tip|percent" msgid "Stack series display values as percent." msgstr "堆疊序列會以百分比顯示數值。" #. ijuPy #: chart2/uiconfig/ui/tp_ChartType.ui:306 msgctxt "tp_ChartType|deep" msgid "Deep" msgstr "深層" #. etF2p #: chart2/uiconfig/ui/tp_ChartType.ui:335 msgctxt "tp_ChartType|linetypeft" msgid "_Line type" msgstr "線條類型(_L)" #. RbyB4 #: chart2/uiconfig/ui/tp_ChartType.ui:349 msgctxt "tp_ChartType|linetype" msgid "Straight" msgstr "長直" #. dG5tv #: chart2/uiconfig/ui/tp_ChartType.ui:350 msgctxt "tp_ChartType|linetype" msgid "Smooth" msgstr "平滑" #. uHHpu #: chart2/uiconfig/ui/tp_ChartType.ui:351 msgctxt "tp_ChartType|linetype" msgid "Stepped" msgstr "階狀" #. G3eDR #: chart2/uiconfig/ui/tp_ChartType.ui:355 msgctxt "tp_ChartType|extended_tip|linetype" msgid "Choose the type of line to draw." msgstr "選取 3D 外觀的類型。" #. JqNUv #: chart2/uiconfig/ui/tp_ChartType.ui:366 msgctxt "tp_ChartType|properties" msgid "Properties..." msgstr "屬性..." #. EnymX #: chart2/uiconfig/ui/tp_ChartType.ui:372 msgctxt "tp_ChartType|extended_tip|properties" msgid "Opens a dialog to set the line or curve properties." msgstr "" #. KzGZQ #: chart2/uiconfig/ui/tp_ChartType.ui:389 msgctxt "tp_ChartType|sort" msgid "_Sort by X values" msgstr "依 X 值排序(_S)" #. tbgi3 #: chart2/uiconfig/ui/tp_ChartType.ui:397 msgctxt "tp_ChartType|extended_tip|sort" msgid "Connects points by ascending X values, even if the order of values is different, in an XY scatter diagram." msgstr "在 XY 散佈圖中向上排序 X 值以連接點，即使數值的順序不同亦然。" #. CmGat #: chart2/uiconfig/ui/tp_ChartType.ui:415 msgctxt "tp_ChartType|nolinesft" msgid "_Number of lines" msgstr "線條的數目" #. bBgDJ #: chart2/uiconfig/ui/tp_ChartType.ui:434 msgctxt "tp_ChartType|extended_tip|nolines" msgid "Set the number of lines for the Column and Line chart type." msgstr "設定柱狀與線條圖表類型的線條數。" #. M2sxB #: chart2/uiconfig/ui/tp_ChartType.ui:503 msgctxt "tp_ChartType|extended_tip|charttype" msgid "Select a basic chart type." msgstr "選取基本圖表類型。" #. qRkoY #: chart2/uiconfig/ui/tp_DataLabel.ui:37 msgctxt "tp_DataLabel|CB_VALUE_AS_NUMBER" msgid "Show value as _number" msgstr "值顯示為數字(_N)" #. uGdoi #: chart2/uiconfig/ui/tp_DataLabel.ui:46 msgctxt "tp_DataLabel|extended_tip|CB_VALUE_AS_NUMBER" msgid "Displays the absolute values of the data points." msgstr "顯示資料點的絕對數值。" #. wRisc #: chart2/uiconfig/ui/tp_DataLabel.ui:57 msgctxt "tp_DataLabel|CB_VALUE_AS_PERCENTAGE" msgid "Show value as _percentage" msgstr "值顯示為百分比(_P)" #. FcaPo #: chart2/uiconfig/ui/tp_DataLabel.ui:66 msgctxt "tp_DataLabel|extended_tip|CB_VALUE_AS_PERCENTAGE" msgid "Displays the percentage of the data points in each column." msgstr "在每欄中顯示資料點的百分比。" #. gyqnC #: chart2/uiconfig/ui/tp_DataLabel.ui:77 msgctxt "tp_DataLabel|CB_CATEGORY" msgid "Show _category" msgstr "顯示類別(_C)" #. EZXZX #: chart2/uiconfig/ui/tp_DataLabel.ui:86 msgctxt "tp_DataLabel|extended_tip|CB_CATEGORY" msgid "Shows the data point text labels." msgstr "顯示資料點文字貼標。" #. kce65 #: chart2/uiconfig/ui/tp_DataLabel.ui:97 msgctxt "tp_DataLabel|CB_SYMBOL" msgid "Show _legend key" msgstr "顯示圖例(_L)" #. Bm8gp #: chart2/uiconfig/ui/tp_DataLabel.ui:106 msgctxt "tp_DataLabel|extended_tip|CB_SYMBOL" msgid "Displays the legend icons next to each data point label." msgstr "在每個資料點貼標旁顯示圖例圖示。" #. K3uFN #: chart2/uiconfig/ui/tp_DataLabel.ui:117 msgctxt "tp_DataLabel|CB_WRAP_TEXT" msgid "Auto text _wrap" msgstr "文字自動折行(_W)" #. tgNDD #: chart2/uiconfig/ui/tp_DataLabel.ui:132 msgctxt "tp_DataLabel|PB_NUMBERFORMAT" msgid "Number _format..." msgstr "數字格式(_F)..." #. nzq24 #: chart2/uiconfig/ui/tp_DataLabel.ui:140 msgctxt "tp_DataLabel|extended_tip|PB_NUMBERFORMAT" msgid "Opens a dialog to select the number format." msgstr "開啟對話方塊以選取數字格式。" #. PYC2b #: chart2/uiconfig/ui/tp_DataLabel.ui:151 msgctxt "tp_DataLabel|PB_PERCENT_NUMBERFORMAT" msgid "Percentage f_ormat..." msgstr "百分比格式(_O)..." #. 3wD3x #: chart2/uiconfig/ui/tp_DataLabel.ui:159 msgctxt "tp_DataLabel|extended_tip|PB_PERCENT_NUMBERFORMAT" msgid "Opens a dialog to select the percentage format." msgstr "開啟對話方塊以選取百分比格式。" #. gFELD #: chart2/uiconfig/ui/tp_DataLabel.ui:172 msgctxt "tp_DataLabel|CT_LABEL_DIAL" msgid "ABCD" msgstr "ABCD" #. GqA8C #: chart2/uiconfig/ui/tp_DataLabel.ui:191 msgctxt "tp_DataLabel|FT_TEXT_SEPARATOR" msgid "_Separator" msgstr "分隔符號(_S)" #. oPhGH #: chart2/uiconfig/ui/tp_DataLabel.ui:208 msgctxt "tp_DataLabel|liststoreSEPARATOR" msgid "Space" msgstr "空格" #. fR4fG #: chart2/uiconfig/ui/tp_DataLabel.ui:209 msgctxt "tp_DataLabel|liststoreSEPARATOR" msgid "Comma" msgstr "逗號" #. 5baF4 #: chart2/uiconfig/ui/tp_DataLabel.ui:210 msgctxt "tp_DataLabel|liststoreSEPARATOR" msgid "Semicolon" msgstr "分號" #. 8MGkQ #: chart2/uiconfig/ui/tp_DataLabel.ui:211 msgctxt "tp_DataLabel|liststoreSEPARATOR" msgid "New line" msgstr "新行" #. bpmiF #: chart2/uiconfig/ui/tp_DataLabel.ui:212 msgctxt "tp_DataLabel|liststoreSEPARATOR" msgid "Period" msgstr "句號" #. jjR8u #: chart2/uiconfig/ui/tp_DataLabel.ui:216 msgctxt "tp_DataLabel|extended_tip|LB_TEXT_SEPARATOR" msgid "Selects the separator between multiple text strings for the same object." msgstr "選取相同物件的多個文字字串之間的分隔符。" #. 2MNGz #: chart2/uiconfig/ui/tp_DataLabel.ui:242 msgctxt "tp_DataLabel|FT_LABEL_PLACEMENT" msgid "Place_ment" msgstr "取代(_P)" #. L2MYb #: chart2/uiconfig/ui/tp_DataLabel.ui:259 msgctxt "tp_DataLabel|liststorePLACEMENT" msgid "Best fit" msgstr "自動調整" #. ba7eW #: chart2/uiconfig/ui/tp_DataLabel.ui:260 msgctxt "tp_DataLabel|liststorePLACEMENT" msgid "Center" msgstr "置中" #. nW5vs #: chart2/uiconfig/ui/tp_DataLabel.ui:261 msgctxt "tp_DataLabel|liststorePLACEMENT" msgid "Above" msgstr "上" #. gW9Aa #: chart2/uiconfig/ui/tp_DataLabel.ui:262 msgctxt "tp_DataLabel|liststorePLACEMENT" msgid "Top left" msgstr "左上" #. UQBcJ #: chart2/uiconfig/ui/tp_DataLabel.ui:263 msgctxt "tp_DataLabel|liststorePLACEMENT" msgid "Left" msgstr "左" #. CVw6x #: chart2/uiconfig/ui/tp_DataLabel.ui:264 msgctxt "tp_DataLabel|liststorePLACEMENT" msgid "Bottom left" msgstr "左下" #. EF7Qb #: chart2/uiconfig/ui/tp_DataLabel.ui:265 msgctxt "tp_DataLabel|liststorePLACEMENT" msgid "Below" msgstr "下" #. bdAYf #: chart2/uiconfig/ui/tp_DataLabel.ui:266 msgctxt "tp_DataLabel|liststorePLACEMENT" msgid "Bottom right" msgstr "右下" #. kHGEs #: chart2/uiconfig/ui/tp_DataLabel.ui:267 msgctxt "tp_DataLabel|liststorePLACEMENT" msgid "Right" msgstr "右" #. GFkmP #: chart2/uiconfig/ui/tp_DataLabel.ui:268 msgctxt "tp_DataLabel|liststorePLACEMENT" msgid "Top right" msgstr "右上" #. KFZhx #: chart2/uiconfig/ui/tp_DataLabel.ui:269 msgctxt "tp_DataLabel|liststorePLACEMENT" msgid "Inside" msgstr "內" #. BJm6w #: chart2/uiconfig/ui/tp_DataLabel.ui:270 msgctxt "tp_DataLabel|liststorePLACEMENT" msgid "Outside" msgstr "外" #. XGkMi #: chart2/uiconfig/ui/tp_DataLabel.ui:271 msgctxt "tp_DataLabel|liststorePLACEMENT" msgid "Near origin" msgstr "靠近原點" #. vq2Bf #: chart2/uiconfig/ui/tp_DataLabel.ui:275 msgctxt "tp_DataLabel|extended_tip|LB_LABEL_PLACEMENT" msgid "Selects the placement of data labels relative to the objects." msgstr "選取物件的相對資料標籤位置。" #. PNGYD #: chart2/uiconfig/ui/tp_DataLabel.ui:295 msgctxt "tp_DataLabel|STR_DLG_NUMBERFORMAT_FOR_PERCENTAGE_VALUE" msgid "Number Format for Percentage Value" msgstr "百分比值的數字格式" #. 3BZrx #: chart2/uiconfig/ui/tp_DataLabel.ui:313 msgctxt "tp_DataLabel|label1" msgid "Text Attributes" msgstr "文字特性" #. avLCL #: chart2/uiconfig/ui/tp_DataLabel.ui:357 msgctxt "tp_DataLabel|extended_tip|CT_DIAL" msgid "Click in the dial to set the text orientation for the data labels." msgstr "在刻度盤中按一下以設定資料標籤的文字方向。" #. eKwUH #: chart2/uiconfig/ui/tp_DataLabel.ui:377 msgctxt "tp_DataLabel|extended_tip|NF_LABEL_DEGREES" msgid "Enter the counterclockwise rotation angle for the data labels." msgstr "" #. VArif #: chart2/uiconfig/ui/tp_DataLabel.ui:391 msgctxt "tp_DataLabel|FT_LABEL_DEGREES" msgid "_Degrees" msgstr "度(_D)" #. zdP7E #: chart2/uiconfig/ui/tp_DataLabel.ui:416 msgctxt "tp_DataLabel|FT_LABEL_TEXTDIR" msgid "Te_xt direction" msgstr "文字方向(_X)" #. MYXZo #: chart2/uiconfig/ui/tp_DataLabel.ui:433 msgctxt "tp_DataLabel|extended_tip|LB_LABEL_TEXTDIR" msgid "Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled." msgstr "指定使用複合文字版面配置 (CTL) 段落的文字方向。除非已啟用複合文字版面配置，否則無法使用此功能。" #. PKnKk #: chart2/uiconfig/ui/tp_DataLabel.ui:458 msgctxt "tp_DataLabel|label2" msgid "Rotate Text" msgstr "旋轉文字" #. iDheE #: chart2/uiconfig/ui/tp_DataLabel.ui:474 msgctxt "tp_DataLabel|extended_tip|tp_DataLabel" msgid "Opens the Data Labels dialog, which enables you to set the data labels." msgstr "開啟 [資料標籤] 對話方塊，該對話方塊可讓您設定資料標籤。" #. rXE7B #: chart2/uiconfig/ui/tp_DataPointOption.ui:41 msgctxt "tp_DataPointOption|CB_LEGEND_ENTRY_HIDDEN" msgid "Hide legend entry" msgstr "隱藏圖例條目" #. k2s9H #: chart2/uiconfig/ui/tp_DataPointOption.ui:49 msgctxt "tp_DataPointOption|extended_tip|CB_LEGEND_ENTRY_HIDDEN" msgid "Do not show legend entry for the selected data series or data point." msgstr "" #. DUQwA #: chart2/uiconfig/ui/tp_DataPointOption.ui:67 msgctxt "tp_DataPointOption|label1" msgid "Legend Entry" msgstr "圖例條目" #. A2dFx #: chart2/uiconfig/ui/tp_DataSource.ui:18 msgctxt "tp_DataSource|imageIMB_RANGE_CAT|tooltip_text" msgid "Select data range" msgstr "選取資料範圍" #. kEnRN #: chart2/uiconfig/ui/tp_DataSource.ui:24 msgctxt "tp_DataSource|imageIMB_RANGE_MAIN|tooltip_text" msgid "Select data range" msgstr "選取資料範圍" #. 2iNp6 #: chart2/uiconfig/ui/tp_DataSource.ui:70 msgctxt "tp_DataSource|FT_SERIES" msgid "Data _series:" msgstr "資料序列(_S)：" #. oFoeg #: chart2/uiconfig/ui/tp_DataSource.ui:113 msgctxt "tp_DataSource|extended_tip|LB_SERIES" msgid "Shows a list of all data series in the chart. Click an entry to view and edit that data series. Click Add to insert a new series into the list after the selected entry." msgstr "顯示圖表中所有資料序列的清單。按一下某個項目以檢視並編輯該資料序列。按一下 [增加] 將新序列插入清單中的選取項目之後。" #. rqABh #: chart2/uiconfig/ui/tp_DataSource.ui:133 msgctxt "tp_DataSource|BTN_ADD" msgid "_Add" msgstr "加入(_A)" #. AExBB #: chart2/uiconfig/ui/tp_DataSource.ui:141 msgctxt "tp_DataSource|extended_tip|BTN_ADD" msgid "Adds a new entry below the current entry in the Data Series list. If an entry is selected, the new data series gets the same chart type." msgstr "在 [資料序列] 清單的目前項目下新增項目。若選取了某個項目，則新的資料序列會得到相同的圖表類型。" #. dCyXA #: chart2/uiconfig/ui/tp_DataSource.ui:159 msgctxt "tp_DataSource|BTN_UP-atkobject" msgid "Up" msgstr "向上" #. GTEK3 #: chart2/uiconfig/ui/tp_DataSource.ui:160 msgctxt "tp_DataSource|extended_tip|BTN_UP" msgid "Moves up the selected entry in the Data Series list." msgstr "將 [資料序列] 清單中選取的項目向上移動。" #. 3v9x2 #: chart2/uiconfig/ui/tp_DataSource.ui:171 msgctxt "tp_DataSource|BTN_REMOVE" msgid "_Remove" msgstr "移除(_R)" #. BDDwm #: chart2/uiconfig/ui/tp_DataSource.ui:179 msgctxt "tp_DataSource|extended_tip|BTN_REMOVE" msgid "Removes the selected entry from the Data Series list." msgstr "從 [資料序列] 清單中移除選取的項目。" #. MkZNf #: chart2/uiconfig/ui/tp_DataSource.ui:197 msgctxt "tp_DataSource|BTN_DOWN-atkobject" msgid "Down" msgstr "向下" #. 558EK #: chart2/uiconfig/ui/tp_DataSource.ui:198 msgctxt "tp_DataSource|extended_tip|BTN_DOWN" msgid "Moves down the selected entry in the Data Series list." msgstr "將 [資料序列] 清單中選取的項目向下移動。" #. mC5Ge #: chart2/uiconfig/ui/tp_DataSource.ui:238 msgctxt "tp_DataSource|FT_ROLE" msgid "_Data ranges:" msgstr "資料範圍(_D)：" #. ZB6Dv #: chart2/uiconfig/ui/tp_DataSource.ui:291 msgctxt "tp_DataSource|extended_tip|LB_ROLE" msgid "Shows all the data ranges used by the data series that is selected in the Data Series list box. Each data range shows the role name and the source range address." msgstr "顯示 [資料序列] 清單方塊中選取的資料序列所用之所有資料範圍。每個資料範圍皆會顯示角色名稱和來源範圍位址。" #. qRMfs #: chart2/uiconfig/ui/tp_DataSource.ui:306 msgctxt "tp_DataSource|FT_RANGE" msgid "Ran_ge for %VALUETYPE" msgstr "%VALUETYPE 的範圍(_G)" #. M2BSw #: chart2/uiconfig/ui/tp_DataSource.ui:330 msgctxt "tp_DataSource|extended_tip|EDT_RANGE" msgid "Shows the source range address from the second column of the Data Range list box. You can change the range in the text box or by dragging in the document. To minimize this dialog while you select the data range in Calc, click the Select data range button." msgstr "顯示 [資料範圍] 清單方塊的第二欄中之來源範圍位址。您可以在文字方塊中，或透過在文件中拖曳來變更範圍。若要在 Calc 中選取資料範圍時最小化此對話方塊，請按一下 [選取資料範圍] 按鈕。" #. CwKet #: chart2/uiconfig/ui/tp_DataSource.ui:347 msgctxt "tp_DataSource|extended_tip|IMB_RANGE_MAIN" msgid "Shows the source range address from the second column of the Data Range list box. You can change the range in the text box or by dragging in the document. To minimize this dialog while you select the data range in Calc, click the Select data range button." msgstr "顯示 [資料範圍] 清單方塊的第二欄中之來源範圍位址。您可以在文字方塊中，或透過在文件中拖曳來變更範圍。若要在 Calc 中選取資料範圍時最小化此對話方塊，請按一下 [選取資料範圍] 按鈕。" #. FX2CF #: chart2/uiconfig/ui/tp_DataSource.ui:371 msgctxt "tp_DataSource|FT_CATEGORIES" msgid "_Categories" msgstr "類別(_C)" #. EiwXn #: chart2/uiconfig/ui/tp_DataSource.ui:385 msgctxt "tp_DataSource|FT_DATALABELS" msgid "Data _labels" msgstr "資料標籤(_L)" #. ogTbE #: chart2/uiconfig/ui/tp_DataSource.ui:414 msgctxt "tp_DataSource|extended_tip|EDT_CATEGORIES" msgid "Shows the source range address of the categories (the texts you can see on the x-axis of a category chart). For an XY-chart, the text box contains the source range of the data labels which are displayed for the data points. To minimize this dialog while you select the data range in Calc, click the Select data range button." msgstr "顯示分類的來源範圍位址 (您可以在分類圖表的 X 軸上看到的文字)。若是 XY 圖表，文字方塊會包含為資料點所顯示的資料標籤之來源範圍。若要在 Calc 中選取資料範圍時最小化此對話方塊，請按一下 [選取資料範圍] 按鈕。" #. EYFEo #: chart2/uiconfig/ui/tp_DataSource.ui:431 msgctxt "tp_DataSource|extended_tip|IMB_RANGE_CAT" msgid "Shows the source range address of the categories (the texts you can see on the x-axis of a category chart). For an XY-chart, the text box contains the source range of the data labels which are displayed for the data points. To minimize this dialog while you select the data range in Calc, click the Select data range button." msgstr "顯示分類的來源範圍位址 (您可以在分類圖表的 X 軸上看到的文字)。若是 XY 圖表，文字方塊會包含為資料點所顯示的資料標籤之來源範圍。若要在 Calc 中選取資料範圍時最小化此對話方塊，請按一下 [選取資料範圍] 按鈕。" #. YwALA #: chart2/uiconfig/ui/tp_DataSource.ui:468 msgctxt "tp_DataSource|FT_CAPTION_FOR_WIZARD" msgid "Customize Data Ranges for Individual Data Series" msgstr "為各自資料序列自訂資料範圍" #. tGqhN #: chart2/uiconfig/ui/tp_ErrorBars.ui:57 msgctxt "tp_ErrorBars|RB_NONE" msgid "_None" msgstr "無(_N)" #. YVhm9 #: chart2/uiconfig/ui/tp_ErrorBars.ui:68 msgctxt "tp_ErrorBars|extended_tip|RB_NONE" msgid "Does not show any error bars." msgstr "" #. Cq44D #: chart2/uiconfig/ui/tp_ErrorBars.ui:80 msgctxt "tp_ErrorBars|RB_CONST" msgid "_Constant Value" msgstr "恆定值(_C)" #. Aetuh #: chart2/uiconfig/ui/tp_ErrorBars.ui:91 msgctxt "tp_ErrorBars|extended_tip|RB_CONST" msgid "Displays constant values that you specify in the Parameters area." msgstr "" #. Njqok #: chart2/uiconfig/ui/tp_ErrorBars.ui:103 msgctxt "tp_ErrorBars|RB_PERCENT" msgid "_Percentage" msgstr "百分比(_P)" #. kqgrm #: chart2/uiconfig/ui/tp_ErrorBars.ui:114 msgctxt "tp_ErrorBars|extended_tip|RB_PERCENT" msgid "Displays a percentage. The display refers to the corresponding data point. Set the percentage in the Parameters area." msgstr "" #. qCQY8 #: chart2/uiconfig/ui/tp_ErrorBars.ui:141 msgctxt "tp_ErrorBars|extended_tip|RB_FUNCTION" msgid "Select a function to calculate the error bars." msgstr "選取函式以計算誤差線。" #. GnXao #: chart2/uiconfig/ui/tp_ErrorBars.ui:156 msgctxt "tp_ErrorBars|liststoreFUNCTION" msgid "Standard Error" msgstr "標準誤" #. SQ3rE #: chart2/uiconfig/ui/tp_ErrorBars.ui:157 msgctxt "tp_ErrorBars|liststoreFUNCTION" msgid "Standard Deviation" msgstr "標準差" #. GagXt #: chart2/uiconfig/ui/tp_ErrorBars.ui:158 msgctxt "tp_ErrorBars|liststoreFUNCTION" msgid "Variance" msgstr "變異數" #. Siyxd #: chart2/uiconfig/ui/tp_ErrorBars.ui:159 msgctxt "tp_ErrorBars|liststoreFUNCTION" msgid "Error Margin" msgstr "誤差邊緣" #. j6oTg #: chart2/uiconfig/ui/tp_ErrorBars.ui:163 msgctxt "tp_ErrorBars|extended_tip|LB_FUNCTION" msgid "Select a function to calculate the error bars." msgstr "選取函式以計算誤差線。" #. AbhAQ #: chart2/uiconfig/ui/tp_ErrorBars.ui:182 msgctxt "tp_ErrorBars|RB_RANGE" msgid "Cell _Range" msgstr "儲存格範圍(_R)" #. x3uW3 #: chart2/uiconfig/ui/tp_ErrorBars.ui:193 msgctxt "tp_ErrorBars|extended_tip|RB_RANGE" msgid "Click Cell Range and then specify a cell range from which to take the positive and negative error bar values." msgstr "按一下 [儲存格範圍]，然後指定要從中擷取正誤差線值與負誤差線值的儲存格範圍。" #. 9Y8Vo #: chart2/uiconfig/ui/tp_ErrorBars.ui:211 msgctxt "tp_ErrorBars|label1" msgid "Error Category" msgstr "誤差類別" #. q8qXd #: chart2/uiconfig/ui/tp_ErrorBars.ui:245 msgctxt "tp_ErrorBars|RB_BOTH" msgid "Positive _and Negative" msgstr "正數與負數(_A)" #. LDszs #: chart2/uiconfig/ui/tp_ErrorBars.ui:256 msgctxt "tp_ErrorBars|extended_tip|RB_BOTH" msgid "Shows positive and negative error bars." msgstr "顯示正誤差線與負誤差線。" #. 6F78D #: chart2/uiconfig/ui/tp_ErrorBars.ui:267 msgctxt "tp_ErrorBars|RB_POSITIVE" msgid "Pos_itive" msgstr "正數(_I)" #. oSnnp #: chart2/uiconfig/ui/tp_ErrorBars.ui:278 msgctxt "tp_ErrorBars|extended_tip|RB_POSITIVE" msgid "Shows only positive error bars." msgstr "僅顯示正誤差線。" #. jdFbj #: chart2/uiconfig/ui/tp_ErrorBars.ui:289 msgctxt "tp_ErrorBars|RB_NEGATIVE" msgid "Ne_gative" msgstr "負數(_G)" #. DvqJN #: chart2/uiconfig/ui/tp_ErrorBars.ui:300 msgctxt "tp_ErrorBars|extended_tip|RB_NEGATIVE" msgid "Shows only negative error bars." msgstr "僅顯示負誤差線。" #. D4Aou #: chart2/uiconfig/ui/tp_ErrorBars.ui:350 msgctxt "tp_ErrorBars|label2" msgid "Error Indicator" msgstr "誤差指示符" #. haTNd #: chart2/uiconfig/ui/tp_ErrorBars.ui:398 msgctxt "tp_ErrorBars|FT_POSITIVE" msgid "P_ositive (+)" msgstr "正 (+)(_O)" #. 7bDeP #: chart2/uiconfig/ui/tp_ErrorBars.ui:416 msgctxt "tp_ErrorBars|extended_tip|MF_POSITIVE" msgid "Enter the value to add to the displayed value as the positive error value." msgstr "輸入要加到顯示值的值，作為正誤差值。" #. D5XCD #: chart2/uiconfig/ui/tp_ErrorBars.ui:434 msgctxt "tp_ErrorBars|extended_tip|ED_RANGE_POSITIVE" msgid "Enter the address range from where to get the positive error values. Use the Shrink button to select the range from a sheet." msgstr "輸入要取得正誤差值的位址範圍。使用 [收縮] 按鈕從工作表中選取範圍。" #. rGBRC #: chart2/uiconfig/ui/tp_ErrorBars.ui:449 msgctxt "tp_ErrorBars|IB_RANGE_POSITIVE|tooltip_text" msgid "Select data range" msgstr "選取資料範圍" #. QYRko #: chart2/uiconfig/ui/tp_ErrorBars.ui:453 msgctxt "tp_ErrorBars|extended_tip|IB_RANGE_POSITIVE" msgid "Click a button to shrink the dialog, then use the mouse to select the cell range in the spreadsheet. Click the button again to restore the dialog to full size." msgstr "按一下按鈕可縮小對話方塊，然後使用滑鼠選取試算表中的儲存格範圍。再按一下按鈕可將對話方塊復原為完整大小。" #. C5ZdQ #: chart2/uiconfig/ui/tp_ErrorBars.ui:479 msgctxt "tp_ErrorBars|FT_NEGATIVE" msgid "_Negative (-)" msgstr "負 (-)(_N)" #. TAAD2 #: chart2/uiconfig/ui/tp_ErrorBars.ui:497 msgctxt "tp_ErrorBars|extended_tip|MF_NEGATIVE" msgid "Enter the value to subtract from the displayed value as the negative error value." msgstr "輸入要從顯示值減去的值，作為負誤差值。" #. S8d3Y #: chart2/uiconfig/ui/tp_ErrorBars.ui:514 msgctxt "tp_ErrorBars|extended_tip|ED_RANGE_NEGATIVE" msgid "Enter the address range from where to get the negative error values. Use the Shrink button to select the range from a sheet." msgstr "輸入要取得負誤差值的位址範圍。使用 [收縮] 按鈕從工作表中選取範圍。" #. EVG7h #: chart2/uiconfig/ui/tp_ErrorBars.ui:529 msgctxt "tp_ErrorBars|IB_RANGE_NEGATIVE|tooltip_text" msgid "Select data range" msgstr "選取資料範圍" #. oEACZ #: chart2/uiconfig/ui/tp_ErrorBars.ui:533 msgctxt "tp_ErrorBars|extended_tip|IB_RANGE_NEGATIVE" msgid "Click a button to shrink the dialog, then use the mouse to select the cell range in the spreadsheet. Click the button again to restore the dialog to full size." msgstr "按一下按鈕可縮小對話方塊，然後使用滑鼠選取試算表中的儲存格範圍。再按一下按鈕可將對話方塊復原為完整大小。" #. wdsax #: chart2/uiconfig/ui/tp_ErrorBars.ui:552 msgctxt "tp_ErrorBars|CB_SYN_POS_NEG" msgid "Same value for both" msgstr "兩者同值" #. DvgLw #: chart2/uiconfig/ui/tp_ErrorBars.ui:561 msgctxt "tp_ErrorBars|extended_tip|CB_SYN_POS_NEG" msgid "Enable to use the positive error values also as negative error values. You can only change the value of the \"Positive (+)\" box. That value gets copied to the \"Negative (-)\" box automatically." msgstr "" #. BEj3C #: chart2/uiconfig/ui/tp_ErrorBars.ui:579 msgctxt "tp_ErrorBars|label3" msgid "Parameters" msgstr "參數" #. XxRKD #: chart2/uiconfig/ui/tp_ErrorBars.ui:596 msgctxt "tp_ErrorBars|STR_DATA_SELECT_RANGE_FOR_POSITIVE_ERRORBARS" msgid "Select Range for Positive Error Bars" msgstr "選取正誤差線的範圍" #. FXjsk #: chart2/uiconfig/ui/tp_ErrorBars.ui:607 msgctxt "tp_ErrorBars|STR_DATA_SELECT_RANGE_FOR_NEGATIVE_ERRORBARS" msgid "Select Range for Negative Error Bars" msgstr "選取負誤差線的範圍" #. AAfgS #: chart2/uiconfig/ui/tp_ErrorBars.ui:618 msgctxt "tp_ErrorBars|STR_CONTROLTEXT_ERROR_BARS_FROM_DATA" msgid "From Data Table" msgstr "從資料表格" #. C9QvS #: chart2/uiconfig/ui/tp_LegendPosition.ui:30 msgctxt "tp_LegendPosition|left" msgid "_Left" msgstr "左(_L)" #. 98N4N #: chart2/uiconfig/ui/tp_LegendPosition.ui:39 msgctxt "tp_LegendPosition|extended_tip|left" msgid "Positions the legend at the left of the chart." msgstr "將圖例置於圖表左側。" #. WGGa8 #: chart2/uiconfig/ui/tp_LegendPosition.ui:50 msgctxt "tp_LegendPosition|right" msgid "_Right" msgstr "右(_R)" #. BgNsc #: chart2/uiconfig/ui/tp_LegendPosition.ui:60 msgctxt "tp_LegendPosition|extended_tip|right" msgid "Positions the legend at the right of the chart." msgstr "將圖例置於圖表右側。" #. aURZs #: chart2/uiconfig/ui/tp_LegendPosition.ui:71 msgctxt "tp_LegendPosition|top" msgid "_Top" msgstr "上(_T)" #. GppCU #: chart2/uiconfig/ui/tp_LegendPosition.ui:81 msgctxt "tp_LegendPosition|extended_tip|top" msgid "Positions the legend at the top of the chart." msgstr "將圖例置於圖表頂端。" #. 9WgFV #: chart2/uiconfig/ui/tp_LegendPosition.ui:92 msgctxt "tp_LegendPosition|bottom" msgid "_Bottom" msgstr "下(_B)" #. dvBdX #: chart2/uiconfig/ui/tp_LegendPosition.ui:102 msgctxt "tp_LegendPosition|extended_tip|bottom" msgid "Positions the legend at the bottom of the chart." msgstr "將圖例置於圖表底端。" #. z84pQ #: chart2/uiconfig/ui/tp_LegendPosition.ui:119 msgctxt "tp_LegendPosition|TXT_POSITION" msgid "Position" msgstr "位置" #. 6teoB #: chart2/uiconfig/ui/tp_LegendPosition.ui:154 msgctxt "tp_LegendPosition|FT_LEGEND_TEXTDIR" msgid "Te_xt direction" msgstr "文字方向(_X)" #. PSPoQ #: chart2/uiconfig/ui/tp_LegendPosition.ui:170 msgctxt "tp_LegendPosition|extended_tip|LB_LEGEND_TEXTDIR" msgid "Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled." msgstr "指定使用複合文字版面配置 (CTL) 段落的文字方向。除非已啟用複合文字版面配置，否則無法使用此功能。" #. sUDkC #: chart2/uiconfig/ui/tp_LegendPosition.ui:188 msgctxt "tp_LegendPosition|TXT_ORIENTATION" msgid "Text Orientation" msgstr "文字方向" #. VsH8A #: chart2/uiconfig/ui/tp_LegendPosition.ui:221 msgctxt "tp_LegendPosition|CB_NO_OVERLAY" msgid "Show the legend without overlapping the chart" msgstr "顯示圖例且不和圖表重疊" #. yi8AX #: chart2/uiconfig/ui/tp_LegendPosition.ui:230 msgctxt "tp_LegendPosition|extended_tip|CB_NO_OVERLAY" msgid "Specifies whether the legend should overlap the chart." msgstr "" #. 82yue #: chart2/uiconfig/ui/tp_LegendPosition.ui:248 msgctxt "tp_LegendPosition|TXT_OVERLAY" msgid "Overlay" msgstr "疊層" #. 8783D #: chart2/uiconfig/ui/tp_PolarOptions.ui:30 msgctxt "tp_PolarOptions|CB_CLOCKWISE" msgid "_Clockwise direction" msgstr "順時針向(_C)" #. GikR7 #: chart2/uiconfig/ui/tp_PolarOptions.ui:39 msgctxt "tp_PolarOptions|extended_tip|CB_CLOCKWISE" msgid "The default direction in which the pieces of a pie chart are ordered is counterclockwise. Enable the Clockwise direction checkbox to draw the pieces in opposite direction." msgstr "預設會以逆時鐘排列圓形圖的扇形。啟用 [順時鐘方向] 核取方塊可反方向繪製扇形。" #. ATHCu #: chart2/uiconfig/ui/tp_PolarOptions.ui:50 msgctxt "tp_PolarOptions|label1" msgid "Orientation" msgstr "方向" #. mEJCE #: chart2/uiconfig/ui/tp_PolarOptions.ui:90 msgctxt "tp_PolarOptions|extended_tip|CT_ANGLE_DIAL" msgid "Drag the small dot along the circle or click any position on the circle to set the starting angle of a pie or donut chart. The starting angle is the mathematical angle position where the first piece is drawn. The value of 90 degrees draws the first piece at the 12 o'clock position. A value of 0 degrees starts at the 3 o'clock position." msgstr "沿著圓形拖曳其上的小圓點，或在圓形上按一下任意位置，以設定圓形圖或環圈圖的開始角度。開始角度是繪製第一個扇形的數學角度位置。90 度值會在 12 點鐘位置繪製第一個扇形。0 度值會在 3 點鐘位置開始繪製。" #. EEVTg #: chart2/uiconfig/ui/tp_PolarOptions.ui:109 msgctxt "tp_PolarOptions|extended_tip|NF_STARTING_ANGLE" msgid "Enter the starting angle between 0 and 359 degrees. You can also click the arrows to change the displayed value." msgstr "輸入介於 0 到 359 度的開始角度。您也可以按一下箭頭以變更顯示的值。" #. prqEa #: chart2/uiconfig/ui/tp_PolarOptions.ui:123 msgctxt "tp_PolarOptions|FT_ROTATION_DEGREES" msgid "_Degrees" msgstr "度(_D)" #. iHLKn #: chart2/uiconfig/ui/tp_PolarOptions.ui:142 msgctxt "tp_PolarOptions|label2" msgid "Starting Angle" msgstr "起始角度" #. 5zEew #: chart2/uiconfig/ui/tp_PolarOptions.ui:170 msgctxt "tp_PolarOptions|CB_INCLUDE_HIDDEN_CELLS_POLAR" msgid "Include _values from hidden cells" msgstr "包含隱藏儲存格中的值(_V)" #. F5FTp #: chart2/uiconfig/ui/tp_PolarOptions.ui:185 msgctxt "tp_PolarOptions|label3" msgid "Plot Options" msgstr "製圖選項" #. tHATu #: chart2/uiconfig/ui/tp_RangeChooser.ui:8 msgctxt "tp_RangeChooser|imageIB_RANGE|tooltip_text" msgid "Select data range" msgstr "選取資料範圍" #. 4zh42 #: chart2/uiconfig/ui/tp_RangeChooser.ui:26 msgctxt "tp_RangeChooser|FT_CAPTION_FOR_WIZARD" msgid "Choose a Data Range" msgstr "選取資料範圍" #. g2XVd #: chart2/uiconfig/ui/tp_RangeChooser.ui:47 msgctxt "tp_RangeChooser|FT_RANGE" msgid "_Data range:" msgstr "資料範圍(_D)：" #. WKLi7 #: chart2/uiconfig/ui/tp_RangeChooser.ui:65 msgctxt "tp_RangeChooser|extended_tip|ED_RANGE" msgid "Enter the data range that you want to include in your chart. To minimize this dialog while you select the data range in Calc, click the Select data range button." msgstr "輸入要在圖表中包含的資料範圍。若要在 Calc 中選取資料範圍時最小化此對話方塊，請按一下 [選取資料範圍] 按鈕。" #. FyVoD #: chart2/uiconfig/ui/tp_RangeChooser.ui:79 msgctxt "tp_RangeChooser|IB_RANGE|tooltip_text" msgid "Select data range" msgstr "選取資料範圍" #. FVivY #: chart2/uiconfig/ui/tp_RangeChooser.ui:83 msgctxt "tp_RangeChooser|extended_tip|IB_RANGE" msgid "Enter the data range that you want to include in your chart. To minimize this dialog while you select the data range in Calc, click the Select data range button." msgstr "輸入要在圖表中包含的資料範圍。若要在 Calc 中選取資料範圍時最小化此對話方塊，請按一下 [選取資料範圍] 按鈕。" #. RGGHE #: chart2/uiconfig/ui/tp_RangeChooser.ui:100 msgctxt "tp_RangeChooser|RB_DATAROWS" msgid "Data series in _rows" msgstr "以列表示的資料序列(_R)" #. w6DuB #: chart2/uiconfig/ui/tp_RangeChooser.ui:110 msgctxt "tp_RangeChooser|extended_tip|RB_DATAROWS" msgid "Data series get their data from consecutive rows in the selected range. For scatter charts, the first data series will contain x-values for all series. All other data series are used as y-values, one for each series." msgstr "資料序列會從選取範圍的連續列中取得資料。若是散佈圖，第一個資料序列會包含用於所有序列的 X 值。其他所有資料序列會用做 Y 值，每個序列各一個值。" #. wSDqF #: chart2/uiconfig/ui/tp_RangeChooser.ui:121 msgctxt "tp_RangeChooser|RB_DATACOLS" msgid "Data series in _columns" msgstr "以欄表示的資料序列(_C)" #. RfFZF #: chart2/uiconfig/ui/tp_RangeChooser.ui:131 msgctxt "tp_RangeChooser|extended_tip|RB_DATACOLS" msgid "Data series get their data from consecutive columns in the selected range. For scatter charts, the first data column will contain x-values for all series. All other data columns are used as y-values, one for each series." msgstr "資料序列會從選取範圍的連續欄中取得資料。若是散佈圖，第一個資料欄會包含用於所有序列的 X 值。其他所有資料欄會用做 Y 值，每個序列各一個值。" #. CExLY #: chart2/uiconfig/ui/tp_RangeChooser.ui:142 msgctxt "tp_RangeChooser|CB_FIRST_ROW_ASLABELS" msgid "_First row as label" msgstr "第一列作為標籤(_F)" #. HviBv #: chart2/uiconfig/ui/tp_RangeChooser.ui:151 msgctxt "tp_RangeChooser|extended_tip|CB_FIRST_ROW_ASLABELS" msgid "For data series in columns: The first row in the range is used as names for data series. For data series in rows: The first row in the range is used as categories. The remaining rows comprise the data series. If this check box is not selected, all rows are data series." msgstr "欄中的資料序列：範圍中的第一列會用做資料序列的名稱。列中的資料序列：範圍中的第一列會用做分類。其餘列會組成資料序列。若未選取此核取方塊，則所有列皆為資料序列。" #. ER2D7 #: chart2/uiconfig/ui/tp_RangeChooser.ui:162 msgctxt "tp_RangeChooser|CB_FIRST_COLUMN_ASLABELS" msgid "F_irst column as label" msgstr "第一欄作為標籤(_I)" #. tTAhH #: chart2/uiconfig/ui/tp_RangeChooser.ui:171 msgctxt "tp_RangeChooser|extended_tip|CB_FIRST_COLUMN_ASLABELS" msgid "For data series in columns: The first column in the range is used as names for data series. For data series in rows: The first column in the range is used as categories. The remaining columns comprise the data columns. If this check box is not selected, all columns are data columns." msgstr "欄中的資料序列：範圍中的第一欄會用做資料序列的名稱。列中的資料序列：範圍中的第一欄會用做分類。剩餘欄會組成資料欄。若未選取此核取方塊，所有欄皆為資料欄。" #. k9TMD #: chart2/uiconfig/ui/tp_RangeChooser.ui:192 msgctxt "tp_RangeChooser|CB_TIME_BASED" msgid "Time based charting" msgstr "基於時間製圖" #. iuxE5 #: chart2/uiconfig/ui/tp_RangeChooser.ui:242 msgctxt "tp_RangeChooser|label1" msgid "Start Table Index" msgstr "開始表格索引" #. dnmDQ #: chart2/uiconfig/ui/tp_RangeChooser.ui:256 msgctxt "tp_RangeChooser|label2" msgid "End Table Index" msgstr "結束表格索引" #. FcYeD #: chart2/uiconfig/ui/tp_RangeChooser.ui:274 msgctxt "tp_RangeChooser|STR_PAGE_DATA_RANGE" msgid "Data Range" msgstr "資料範圍" #. YfF4A #: chart2/uiconfig/ui/tp_Scale.ui:59 msgctxt "tp_Scale|CBX_REVERSE" msgid "_Reverse direction" msgstr "反轉方向(_R)" #. DNJFK #: chart2/uiconfig/ui/tp_Scale.ui:68 msgctxt "tp_Scale|extended_tip|CBX_REVERSE" msgid "Defines where the lower and where the higher values are displayed at the axis. The unchecked state is the mathematical direction." msgstr "定義在軸上顯示較低值和較高值的位置。未核取的狀態表示使用數學運算方向。" #. qBbBL #: chart2/uiconfig/ui/tp_Scale.ui:80 msgctxt "tp_Scale|CBX_LOGARITHM" msgid "_Logarithmic scale" msgstr "對數標度(_L)" #. 3wDMa #: chart2/uiconfig/ui/tp_Scale.ui:89 msgctxt "tp_Scale|extended_tip|CBX_LOGARITHM" msgid "Specifies that you want the axis to be subdivided logarithmically." msgstr "指定要將軸以對數細分。" #. 2B5CL #: chart2/uiconfig/ui/tp_Scale.ui:108 msgctxt "tp_Scale|TXT_AXIS_TYPE" msgid "T_ype" msgstr "類型(_Y)" #. D6Bre #: chart2/uiconfig/ui/tp_Scale.ui:124 msgctxt "tp_Scale|LB_AXIS_TYPE" msgid "Automatic" msgstr "自動" #. TCiZu #: chart2/uiconfig/ui/tp_Scale.ui:125 msgctxt "tp_Scale|LB_AXIS_TYPE" msgid "Text" msgstr "文字" #. vAAUB #: chart2/uiconfig/ui/tp_Scale.ui:126 msgctxt "tp_Scale|LB_AXIS_TYPE" msgid "Date" msgstr "日期" #. 8YZhv #: chart2/uiconfig/ui/tp_Scale.ui:130 msgctxt "tp_Scale|extended_tip|LB_AXIS_TYPE" msgid "For some types of axes, you can select to format an axis as text or date, or to detect the type automatically." msgstr "" #. Vf7vB #: chart2/uiconfig/ui/tp_Scale.ui:164 msgctxt "tp_Scale|TXT_MIN" msgid "_Minimum" msgstr "最小(_M)" #. XUKzj #: chart2/uiconfig/ui/tp_Scale.ui:178 msgctxt "tp_Scale|TXT_MAX" msgid "Ma_ximum" msgstr "最大(_X)" #. 4jRuB #: chart2/uiconfig/ui/tp_Scale.ui:190 msgctxt "tp_Scale|CBX_AUTO_MIN" msgid "_Automatic" msgstr "自動(_A)" #. Bx5Co #: chart2/uiconfig/ui/tp_Scale.ui:205 msgctxt "tp_Scale|CBX_AUTO_MAX" msgid "A_utomatic" msgstr "自動(_U)" #. 2Kb67 #: chart2/uiconfig/ui/tp_Scale.ui:227 msgctxt "tp_Scale|extended_tip|EDT_MIN" msgid "Defines the minimum value for the beginning of the axis." msgstr "定義軸起點的最小值。" #. AvhE9 #: chart2/uiconfig/ui/tp_Scale.ui:245 msgctxt "tp_Scale|extended_tip|EDT_MAX" msgid "Defines the maximum value for the end of the axis." msgstr "定義軸終點的最大值。" #. TsHtd #: chart2/uiconfig/ui/tp_Scale.ui:270 msgctxt "tp_Scale|TXT_TIME_RESOLUTION" msgid "R_esolution" msgstr "解析度(_E)" #. yyPFB #: chart2/uiconfig/ui/tp_Scale.ui:286 chart2/uiconfig/ui/tp_Scale.ui:378 #: chart2/uiconfig/ui/tp_Scale.ui:519 msgctxt "tp_Scale|liststoreDATE" msgid "Days" msgstr "日" #. 8xKtE #: chart2/uiconfig/ui/tp_Scale.ui:287 chart2/uiconfig/ui/tp_Scale.ui:379 #: chart2/uiconfig/ui/tp_Scale.ui:520 msgctxt "tp_Scale|liststoreDATE" msgid "Months" msgstr "月" #. WRUy8 #: chart2/uiconfig/ui/tp_Scale.ui:288 chart2/uiconfig/ui/tp_Scale.ui:380 #: chart2/uiconfig/ui/tp_Scale.ui:521 msgctxt "tp_Scale|liststoreDATE" msgid "Years" msgstr "年" #. WUANc #: chart2/uiconfig/ui/tp_Scale.ui:292 msgctxt "tp_Scale|extended_tip|LB_TIME_RESOLUTION" msgid "Resolution can be set to show days, months, or years as interval steps." msgstr "" #. ezN7c #: chart2/uiconfig/ui/tp_Scale.ui:304 msgctxt "tp_Scale|CBX_AUTO_TIME_RESOLUTION" msgid "Automat_ic" msgstr "自動(_I)" #. DbJt9 #: chart2/uiconfig/ui/tp_Scale.ui:334 msgctxt "tp_Scale|TXT_STEP_MAIN" msgid "Ma_jor interval" msgstr "主區間值(_J)" #. AtZ6D #: chart2/uiconfig/ui/tp_Scale.ui:363 msgctxt "tp_Scale|extended_tip|MT_MAIN_DATE_STEP" msgid "Major interval can be set to show a certain number of days, months, or years." msgstr "" #. BD5BE #: chart2/uiconfig/ui/tp_Scale.ui:384 msgctxt "tp_Scale|extended_tip|LB_MAIN_TIME_UNIT" msgid "Major interval can be set to show a certain number of days, months, or years." msgstr "" #. a2Gjv #: chart2/uiconfig/ui/tp_Scale.ui:410 msgctxt "tp_Scale|extended_tip|EDT_STEP_MAIN" msgid "Defines the interval for the main division of the axes." msgstr "定義軸的主等分間隔。" #. UMEd3 #: chart2/uiconfig/ui/tp_Scale.ui:429 msgctxt "tp_Scale|CBX_AUTO_STEP_MAIN" msgid "Au_tomatic" msgstr "自動(_T)" #. Pv5GU #: chart2/uiconfig/ui/tp_Scale.ui:464 msgctxt "tp_Scale|TXT_STEP_HELP" msgid "Minor inter_val" msgstr "次區間值(_V)" #. WMGqg #: chart2/uiconfig/ui/tp_Scale.ui:478 msgctxt "tp_Scale|TXT_STEP_HELP_COUNT" msgid "Minor inter_val count" msgstr "次區間值計數(_V)" #. c9m8j #: chart2/uiconfig/ui/tp_Scale.ui:504 msgctxt "tp_Scale|extended_tip|MT_STEPHELP" msgid "Defines the interval for the subdivision of the axes." msgstr "定義軸的線點間隔之間隔值。" #. snFL6 #: chart2/uiconfig/ui/tp_Scale.ui:525 msgctxt "tp_Scale|extended_tip|LB_HELP_TIME_UNIT" msgid "Minor interval can be set to show a certain number of days, months, or years." msgstr "" #. X8FAK #: chart2/uiconfig/ui/tp_Scale.ui:537 msgctxt "tp_Scale|CBX_AUTO_STEP_HELP" msgid "Aut_omatic" msgstr "自動(_O)" #. GAKPN #: chart2/uiconfig/ui/tp_Scale.ui:567 msgctxt "tp_Scale|TXT_ORIGIN" msgid "Re_ference value" msgstr "參照值(_F)" #. HbRqw #: chart2/uiconfig/ui/tp_Scale.ui:586 msgctxt "tp_Scale|extended_tip|EDT_ORIGIN" msgid "Specifies at which position to display the values along the axis." msgstr "指定軸上顯示數值的位置。" #. Dj9GB #: chart2/uiconfig/ui/tp_Scale.ui:598 msgctxt "tp_Scale|CBX_AUTO_ORIGIN" msgid "Automat_ic" msgstr "自動(_I)" #. Z35M3 #: chart2/uiconfig/ui/tp_Scale.ui:607 msgctxt "tp_Scale|extended_tip|CBX_AUTO_ORIGIN" msgid "You must first deselect the Automatic option in order to modify the values." msgstr "必須先取消選取 [自動] 選項才可修改數值。" #. wqR5C #: chart2/uiconfig/ui/tp_Scale.ui:632 msgctxt "tp_Scale|FL_SCALE" msgid "Scale" msgstr "標度" #. YK66G #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:42 msgctxt "tp_SeriesToAxis|RBT_OPT_AXIS_1" msgid "Primary Y axis" msgstr "主 Y 軸" #. ApXPx #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:52 msgctxt "tp_SeriesToAxis|extended_tip|RBT_OPT_AXIS_1" msgid "This option is active as default. All data series are aligned to the primary Y axis." msgstr "此選項預設為啟用。所有資料序列都會對齊主要的 Y 軸。" #. aZ7G8 #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:64 msgctxt "tp_SeriesToAxis|RBT_OPT_AXIS_2" msgid "Secondary Y axis" msgstr "次 Y 軸" #. nTQUy #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:75 msgctxt "tp_SeriesToAxis|extended_tip|RBT_OPT_AXIS_2" msgid "Changes the scaling of the Y axis. This axis is only visible when at least one data series is assigned to it and the axis view is active." msgstr "變更 Y 軸的顯示比例。只有在至少指定一個資料序列且軸檢視為啟用的狀態下，才會顯示此軸。" #. hV3cT #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:93 msgctxt "tp_SeriesToAxis|label1" msgid "Align Data Series to" msgstr "將資料序列對齊" #. GAF6S #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:135 msgctxt "tp_SeriesToAxis|FT_GAP" msgid "_Spacing" msgstr "間距(_S)" #. 27wWb #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:148 msgctxt "tp_SeriesToAxis|FT_OVERLAP" msgid "_Overlap" msgstr "重疊(_O)" #. NKaBT #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:164 msgctxt "tp_SeriesToAxis|extended_tip|MT_GAP" msgid "Defines the spacing between the columns in percent." msgstr "以百分比定義欄之間的間隔。" #. 8E3zD #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:180 msgctxt "tp_SeriesToAxis|extended_tip|MT_OVERLAP" msgid "Defines the necessary settings for overlapping data series." msgstr "定義重疊資料序列所需的設定。" #. uV5Dn #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:198 msgctxt "tp_SeriesToAxis|CB_BARS_SIDE_BY_SIDE" msgid "Show _bars side by side" msgstr "並排顯示列(_B)" #. U5ruY #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:207 msgctxt "tp_SeriesToAxis|extended_tip|CB_BARS_SIDE_BY_SIDE" msgid "The bars from different data series are shown as if they were attached only to one axis." msgstr "這些不同資料序列的橫條會顯示為彷彿僅連結至一個座標軸。" #. b7cbo #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:219 msgctxt "tp_SeriesToAxis|CB_CONNECTOR" msgid "Connection lines" msgstr "連結線條" #. 42zFb #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:228 msgctxt "tp_SeriesToAxis|extended_tip|CB_CONNECTOR" msgid "For \"stacked\" and \"percent\" column (vertical bar) charts, mark this check box to connect the column layers that belong together with lines." msgstr "對於「重疊」和「百分比」直條 (垂直條) 圖，標記此核取方塊可使用線條將同屬的欄分層連接起來。" #. VHcU3 #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:246 msgctxt "tp_SeriesToAxis|label2" msgid "Settings" msgstr "設定" #. zaB5V #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:287 msgctxt "tp_SeriesToAxis|FT_MISSING_VALUES" msgid "Plot missing values" msgstr "製圖缺少值" #. fqYSM #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:297 msgctxt "tp_SeriesToAxis|RB_DONT_PAINT" msgid "_Leave gap" msgstr "保留空隙(_L)" #. CFmcS #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:307 msgctxt "tp_SeriesToAxis|extended_tip|RB_DONT_PAINT" msgid "For a missing value, no data will be shown. This is the default for chart types Column, Bar, Line, Net." msgstr "針對缺少的值，將不會顯示任何資料。此為柱狀圖、條狀圖、線條圖、網狀圖等圖表類型的預設值。" #. ZvtoD #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:318 msgctxt "tp_SeriesToAxis|RB_ASSUME_ZERO" msgid "_Assume zero" msgstr "假設為零(_A)" #. y6EGH #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:329 msgctxt "tp_SeriesToAxis|extended_tip|RB_ASSUME_ZERO" msgid "For a missing value, the y-value will be shown as zero. This is the default for chart type Area." msgstr "針對缺少的值，Y 值會顯示為零。此為平面圖圖表類型的預設值。" #. 8rLB4 #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:340 msgctxt "tp_SeriesToAxis|RB_CONTINUE_LINE" msgid "_Continue line" msgstr "接續線條(_C)" #. 2HArG #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:351 msgctxt "tp_SeriesToAxis|extended_tip|RB_CONTINUE_LINE" msgid "For a missing value, the interpolation from the neighbor values will be shown. This is the default for chart type XY." msgstr "針對缺少的值，會顯示鄰點值的內插。此為 XY 散佈圖圖表類型的預設值。" #. Nw9LX #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:375 msgctxt "tp_SeriesToAxis|CB_INCLUDE_HIDDEN_CELLS" msgid "Include _values from hidden cells" msgstr "包含隱藏儲存格的值(_V)" #. vEDHo #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:384 msgctxt "tp_SeriesToAxis|extended_tip|CB_INCLUDE_HIDDEN_CELLS" msgid "Check to also show values of currently hidden cells within the source cell range." msgstr "核取也可顯示來源儲存格範圍內目前隱藏的儲存格值。" #. LvZ8x #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:402 msgctxt "tp_SeriesToAxis|label3" msgid "Plot Options" msgstr "製圖選項" #. gRgPX #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:435 msgctxt "tp_SeriesToAxis|CB_LEGEND_ENTRY_HIDDEN" msgid "Hide legend entry" msgstr "隱藏圖例項目" #. GFmDA #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:443 msgctxt "tp_SeriesToAxis|extended_tip|CB_LEGEND_ENTRY_HIDDEN" msgid "Do not show legend entry for the selected data series or data point." msgstr "" #. q8CTC #: chart2/uiconfig/ui/tp_SeriesToAxis.ui:461 msgctxt "tp_SeriesToAxis|label4" msgid "Legend Entry" msgstr "圖例項目" #. FsWAE #: chart2/uiconfig/ui/tp_Trendline.ui:65 msgctxt "tp_Trendline|linear" msgid "_Linear" msgstr "線性(_L)" #. jir3B #: chart2/uiconfig/ui/tp_Trendline.ui:75 msgctxt "tp_Trendline|extended_tip|linear" msgid "A linear trend line is shown." msgstr "螢幕上會顯示線性趨勢線。" #. u3nKx #: chart2/uiconfig/ui/tp_Trendline.ui:86 msgctxt "tp_Trendline|logarithmic" msgid "L_ogarithmic" msgstr "對數(_O)" #. AZT5a #: chart2/uiconfig/ui/tp_Trendline.ui:97 msgctxt "tp_Trendline|extended_tip|logarithmic" msgid "A logarithmic trend line is shown." msgstr "會顯示對數趨勢線。" #. fPNok #: chart2/uiconfig/ui/tp_Trendline.ui:108 msgctxt "tp_Trendline|exponential" msgid "_Exponential" msgstr "指數(_E)" #. gufBS #: chart2/uiconfig/ui/tp_Trendline.ui:119 msgctxt "tp_Trendline|extended_tip|exponential" msgid "An exponential trend line is shown." msgstr "螢幕上會顯示指數趨勢線。" #. a6FDp #: chart2/uiconfig/ui/tp_Trendline.ui:130 msgctxt "tp_Trendline|power" msgid "Po_wer" msgstr "次方(_W)" #. sU36A #: chart2/uiconfig/ui/tp_Trendline.ui:141 msgctxt "tp_Trendline|extended_tip|power" msgid "A power trend line is shown." msgstr "會顯示乘冪趨勢線。" #. QCeGG #: chart2/uiconfig/ui/tp_Trendline.ui:152 msgctxt "tp_Trendline|polynomial" msgid "_Polynomial" msgstr "多項式(_P)" #. f9EeD #: chart2/uiconfig/ui/tp_Trendline.ui:163 msgctxt "tp_Trendline|extended_tip|polynomial" msgid "A polynomial trend line is shown with a given degree." msgstr "" #. BkiE2 #: chart2/uiconfig/ui/tp_Trendline.ui:174 msgctxt "tp_Trendline|movingAverage" msgid "_Moving Average" msgstr "移動平均(_M)" #. F5WMz #: chart2/uiconfig/ui/tp_Trendline.ui:185 msgctxt "tp_Trendline|extended_tip|movingAverage" msgid "A moving average trend line is shown with a given period." msgstr "" #. mGkUE #: chart2/uiconfig/ui/tp_Trendline.ui:203 msgctxt "tp_Trendline|label3" msgid "Degree" msgstr "度" #. HwBsk #: chart2/uiconfig/ui/tp_Trendline.ui:208 msgctxt "tp_Trendline|extended_tip|label3" msgid "Degree of polynomial trend line." msgstr "" #. EAkKg #: chart2/uiconfig/ui/tp_Trendline.ui:225 msgctxt "tp_Trendline|extended_tip|degree" msgid "Degree of polynomial trend line." msgstr "" #. ZvFov #: chart2/uiconfig/ui/tp_Trendline.ui:249 msgctxt "tp_Trendline|label4" msgid "Period" msgstr "週期" #. akCwy #: chart2/uiconfig/ui/tp_Trendline.ui:254 msgctxt "tp_Trendline|extended_tip|label4" msgid "Number of points to calculate average of moving average trend line." msgstr "" #. g3mex #: chart2/uiconfig/ui/tp_Trendline.ui:271 msgctxt "tp_Trendline|extended_tip|period" msgid "Number of points to calculate average of moving average trend line." msgstr "" #. ptaCA #: chart2/uiconfig/ui/tp_Trendline.ui:366 msgctxt "tp_Trendline|label1" msgid "Regression Type" msgstr "迴歸類型" #. mNh7m #: chart2/uiconfig/ui/tp_Trendline.ui:402 msgctxt "tp_Trendline|label7" msgid "Extrapolate Forward" msgstr "往前外推" #. 4HshA #: chart2/uiconfig/ui/tp_Trendline.ui:408 msgctxt "tp_Trendline|extended_tip|label7" msgid "Trend line is extrapolated for higher x-values." msgstr "" #. tUrKr #: chart2/uiconfig/ui/tp_Trendline.ui:421 msgctxt "tp_Trendline|label8" msgid "Extrapolate Backward" msgstr "往回外推" #. tEfNE #: chart2/uiconfig/ui/tp_Trendline.ui:427 msgctxt "tp_Trendline|extended_tip|label8" msgid "Trend line is extrapolated for lower x-values." msgstr "" #. BGkFJ #: chart2/uiconfig/ui/tp_Trendline.ui:465 msgctxt "tp_Trendline|setIntercept" msgid "Force _Intercept" msgstr "強迫截斷(_I)" #. ZJUti #: chart2/uiconfig/ui/tp_Trendline.ui:477 msgctxt "tp_Trendline|extended_tip|setIntercept" msgid "For linear, polynomial and exponential trend lines, intercept value is forced to a given value." msgstr "" #. CSHNm #: chart2/uiconfig/ui/tp_Trendline.ui:488 msgctxt "tp_Trendline|showEquation" msgid "Show E_quation" msgstr "顯示方程式(_Q)" #. nXrm7 #: chart2/uiconfig/ui/tp_Trendline.ui:497 msgctxt "tp_Trendline|extended_tip|showEquation" msgid "Shows the trend line equation next to the trend line." msgstr "在趨勢線旁顯示趨勢線方程式。" #. cA58s #: chart2/uiconfig/ui/tp_Trendline.ui:509 msgctxt "tp_Trendline|showCorrelationCoefficient" msgid "Show _Coefficient of Determination (R²)" msgstr "顯示決定係數 (R²)(_C)" #. CCyCH #: chart2/uiconfig/ui/tp_Trendline.ui:518 msgctxt "tp_Trendline|extended_tip|showCorrelationCoefficient" msgid "Shows the coefficient of determination next to the trend line." msgstr "在趨勢線旁顯示決定係數。" #. 2S6og #: chart2/uiconfig/ui/tp_Trendline.ui:532 msgctxt "tp_Trendline|label5" msgid "Trendline _Name" msgstr "趨勢線名稱(_N)" #. GasKo #: chart2/uiconfig/ui/tp_Trendline.ui:538 msgctxt "tp_Trendline|extended_tip|label5" msgid "Name of trend line in legend." msgstr "" #. FBT3Y #: chart2/uiconfig/ui/tp_Trendline.ui:554 msgctxt "tp_Trendline|extended_tip|entry_name" msgid "Name of trend line in legend." msgstr "" #. C4C6e #: chart2/uiconfig/ui/tp_Trendline.ui:578 msgctxt "tp_Trendline|extended_tip|interceptValue" msgid "Value of intercept if it is forced." msgstr "" #. GEKL2 #: chart2/uiconfig/ui/tp_Trendline.ui:591 msgctxt "tp_Trendline|label6" msgid "_X Variable Name" msgstr "_X 變數名稱" #. 99kQL #: chart2/uiconfig/ui/tp_Trendline.ui:597 msgctxt "tp_Trendline|extended_tip|label6" msgid "Name of X variable in trend line equation." msgstr "" #. Fz8b3 #: chart2/uiconfig/ui/tp_Trendline.ui:613 msgctxt "tp_Trendline|extended_tip|entry_Xname" msgid "Name of X variable in trend line equation." msgstr "" #. GDQuF #: chart2/uiconfig/ui/tp_Trendline.ui:626 msgctxt "tp_Trendline|label9" msgid "_Y Variable Name" msgstr "_Y 變數名稱" #. 2PBW3 #: chart2/uiconfig/ui/tp_Trendline.ui:632 msgctxt "tp_Trendline|extended_tip|label9" msgid "Name of Y variable in trend line equation." msgstr "" #. WHNXu #: chart2/uiconfig/ui/tp_Trendline.ui:648 msgctxt "tp_Trendline|extended_tip|entry_Yname" msgid "Name of Y variable in trend line equation." msgstr "" #. 9WeUe #: chart2/uiconfig/ui/tp_Trendline.ui:665 msgctxt "tp_Trendline|label2" msgid "Options" msgstr "選項" #. ntcUA #: chart2/uiconfig/ui/tp_axisLabel.ui:19 msgctxt "tp_axisLabel|showlabelsCB" msgid "Sho_w labels" msgstr "顯示標籤(_W)" #. Xr5zw #: chart2/uiconfig/ui/tp_axisLabel.ui:29 msgctxt "tp_axisLabel|extended_tip|showlabelsCB" msgid "Specifies whether to show or hide the axis labels." msgstr "指定要顯示軸貼標還是要隱藏軸貼標。" #. HFhGL #: chart2/uiconfig/ui/tp_axisLabel.ui:67 msgctxt "tp_axisLabel|tile" msgid "_Tile" msgstr "鋪排(_T)" #. cmjFi #: chart2/uiconfig/ui/tp_axisLabel.ui:77 msgctxt "tp_axisLabel|extended_tip|tile" msgid "Arranges numbers on the axis side by side." msgstr "在軸上編排數字。" #. tHrCD #: chart2/uiconfig/ui/tp_axisLabel.ui:89 msgctxt "tp_axisLabel|odd" msgid "St_agger odd" msgstr "交錯排奇數(_A)" #. Q8h6B #: chart2/uiconfig/ui/tp_axisLabel.ui:99 msgctxt "tp_axisLabel|extended_tip|odd" msgid "Staggers numbers on the axis, even numbers lower than odd numbers." msgstr "在軸上交錯排列數字，偶數在上，奇數在下。" #. tByen #: chart2/uiconfig/ui/tp_axisLabel.ui:111 msgctxt "tp_axisLabel|even" msgid "Stagger _even" msgstr "交錯排偶數(_E)" #. 9EMGj #: chart2/uiconfig/ui/tp_axisLabel.ui:121 msgctxt "tp_axisLabel|extended_tip|even" msgid "Stagger numbers on the axes, odd numbers lower than even numbers." msgstr "在軸上交錯排列數字，奇數在上，偶數在下。" #. 2JwY3 #: chart2/uiconfig/ui/tp_axisLabel.ui:133 msgctxt "tp_axisLabel|auto" msgid "A_utomatic" msgstr "自動(_U)" #. fj3Rq #: chart2/uiconfig/ui/tp_axisLabel.ui:143 msgctxt "tp_axisLabel|extended_tip|auto" msgid "Automatically arranges numbers on the axis." msgstr "在軸上自動排列數字。" #. bFH6L #: chart2/uiconfig/ui/tp_axisLabel.ui:161 msgctxt "tp_axisLabel|orderL" msgid "Order" msgstr "排序" #. GMtbb #: chart2/uiconfig/ui/tp_axisLabel.ui:196 msgctxt "tp_axisLabel|overlapCB" msgid "O_verlap" msgstr "重疊(_V)" #. zwgui #: chart2/uiconfig/ui/tp_axisLabel.ui:205 msgctxt "tp_axisLabel|extended_tip|overlapCB" msgid "Specifies that the text in cells may overlap other cells." msgstr "指定儲存格內的文字可重疊其他儲存格。" #. AYpQ8 #: chart2/uiconfig/ui/tp_axisLabel.ui:217 msgctxt "tp_axisLabel|breakCB" msgid "_Break" msgstr "中斷(_B)" #. eBwTo #: chart2/uiconfig/ui/tp_axisLabel.ui:226 msgctxt "tp_axisLabel|extended_tip|breakCB" msgid "Allows a text break." msgstr "允許文字斷行。" #. 4EwR7 #: chart2/uiconfig/ui/tp_axisLabel.ui:244 msgctxt "tp_axisLabel|textflowL" msgid "Text Flow" msgstr "排文和分頁" #. exWTH #: chart2/uiconfig/ui/tp_axisLabel.ui:301 msgctxt "tp_axisLabel|extended_tip|OrientDegree" msgid "Allows you to manually enter the orientation angle." msgstr "可讓您手動輸入對齊角度。" #. 5teDt #: chart2/uiconfig/ui/tp_axisLabel.ui:315 msgctxt "tp_axisLabel|degreeL" msgid "_Degrees" msgstr "度(_D)" #. jFKoF #: chart2/uiconfig/ui/tp_axisLabel.ui:349 msgctxt "tp_axisLabel|stackedCB" msgid "Ve_rtically stacked" msgstr "垂直堆疊(_R)" #. ra62A #: chart2/uiconfig/ui/tp_axisLabel.ui:359 msgctxt "tp_axisLabel|extended_tip|stackedCB" msgid "Assigns vertical text orientation for cell contents." msgstr "將儲存格內容指定為垂直文字方向。" #. JBz5H #: chart2/uiconfig/ui/tp_axisLabel.ui:371 msgctxt "tp_axisLabel|labelABCD" msgid "ABCD" msgstr "ABCD" #. PE6RQ #: chart2/uiconfig/ui/tp_axisLabel.ui:388 msgctxt "tp_axisLabel|textdirL" msgid "Te_xt direction:" msgstr "文字方向(_X)：" #. YUAjA #: chart2/uiconfig/ui/tp_axisLabel.ui:402 msgctxt "tp_axisLabel|extended_tip|textdirLB" msgid "Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled." msgstr "指定使用複合文字版面配置 (CTL) 段落的文字方向。除非已啟用複合文字版面配置，否則無法使用此功能。" #. NxsBh #: chart2/uiconfig/ui/tp_axisLabel.ui:421 msgctxt "tp_axisLabel|extended_tip|dialCtrl" msgid "Clicking anywhere on the wheel defines the variable text orientation." msgstr "按一下輪上的任一處來定義可變文字方向。" #. 3WhzS #: chart2/uiconfig/ui/tp_axisLabel.ui:438 msgctxt "tp_axisLabel|labelTextOrient" msgid "Text Orientation" msgstr "文字方向" #. tCfsY #: chart2/uiconfig/ui/wizelementspage.ui:43 msgctxt "wizelementspage|labelPrimaryXaxis" msgid "_X axis" msgstr "_X 軸" #. LtEdA #: chart2/uiconfig/ui/wizelementspage.ui:57 msgctxt "wizelementspage|labelPrimaryYaxis" msgid "_Y axis" msgstr "_Y 軸" #. tVeNC #: chart2/uiconfig/ui/wizelementspage.ui:71 msgctxt "wizelementspage|labelPrimaryZaxis" msgid "_Z axis" msgstr "_Z 軸" #. 7qRfe #: chart2/uiconfig/ui/wizelementspage.ui:89 msgctxt "wizelementspage|extended_tip|primaryXaxis" msgid "Enter a label for the x-axis (horizontal)." msgstr "輸入 X 軸 (水平方向) 的標籤。" #. 4vThc #: chart2/uiconfig/ui/wizelementspage.ui:106 msgctxt "wizelementspage|extended_tip|primaryYaxis" msgid "Enter a label for the y-axis (vertical)." msgstr "輸入 Y 軸 (垂直方向) 的標籤。" #. 7zPH5 #: chart2/uiconfig/ui/wizelementspage.ui:123 msgctxt "wizelementspage|extended_tip|primaryZaxis" msgid "Enter a label for the z-axis. This option is only available for three-dimensional charts." msgstr "輸入 Z 軸的標籤。只有 3D 圖表可以使用此選項。" #. Qpj9H #: chart2/uiconfig/ui/wizelementspage.ui:136 msgctxt "wizelementspage|labelMainTitle" msgid "_Title" msgstr "題名(_T)" #. nPAjY #: chart2/uiconfig/ui/wizelementspage.ui:150 msgctxt "wizelementspage|labelSubTitle" msgid "_Subtitle" msgstr "副題(_S)" #. CWmMQ #: chart2/uiconfig/ui/wizelementspage.ui:168 msgctxt "wizelementspage|extended_tip|maintitle" msgid "Enter a title for your chart." msgstr "輸入圖表的標題。" #. eNDvd #: chart2/uiconfig/ui/wizelementspage.ui:185 msgctxt "wizelementspage|extended_tip|subtitle" msgid "Enter a subtitle for your chart." msgstr "輸入圖表的子標題。" #. GJ7pJ #: chart2/uiconfig/ui/wizelementspage.ui:198 msgctxt "wizelementspage|labelSecondaryXAxis" msgid "X _axis" msgstr "X 軸(_A)" #. bBRgE #: chart2/uiconfig/ui/wizelementspage.ui:212 msgctxt "wizelementspage|labelSecondaryYAxis" msgid "Y ax_is" msgstr "Y 軸(_I)" #. NGoMT #: chart2/uiconfig/ui/wizelementspage.ui:230 msgctxt "wizelementspage|extended_tip|secondaryXaxis" msgid "Enter a label for the secondary x-axis. This option is only available for charts that support a secondary x-axis." msgstr "輸入輔助 X 軸的標籤。此選項僅適用於支援輔助 X 軸的圖表。" #. E6Y7y #: chart2/uiconfig/ui/wizelementspage.ui:264 msgctxt "wizelementspage|show" msgid "_Display legend" msgstr "顯示圖例(_D)" #. QWAen #: chart2/uiconfig/ui/wizelementspage.ui:273 msgctxt "wizelementspage|extended_tip|show" msgid "Specifies whether to display a legend for the chart." msgstr "指定是否要顯示圖表的圖例。" #. ejdzz #: chart2/uiconfig/ui/wizelementspage.ui:294 msgctxt "wizelementspage|left" msgid "_Left" msgstr "左(_L)" #. tGgc2 #: chart2/uiconfig/ui/wizelementspage.ui:304 msgctxt "wizelementspage|extended_tip|left" msgid "Positions the legend at the left of the chart." msgstr "將圖例置於圖表左側。" #. EjE6h #: chart2/uiconfig/ui/wizelementspage.ui:315 msgctxt "wizelementspage|right" msgid "_Right" msgstr "右(_R)" #. rvAN8 #: chart2/uiconfig/ui/wizelementspage.ui:325 msgctxt "wizelementspage|extended_tip|right" msgid "Positions the legend at the right of the chart." msgstr "將圖例置於圖表右側。" #. LnxgC #: chart2/uiconfig/ui/wizelementspage.ui:336 msgctxt "wizelementspage|top" msgid "_Top" msgstr "上(_T)" #. Ehv3g #: chart2/uiconfig/ui/wizelementspage.ui:346 msgctxt "wizelementspage|extended_tip|top" msgid "Positions the legend at the top of the chart." msgstr "將圖例置於圖表頂端。" #. GD2qS #: chart2/uiconfig/ui/wizelementspage.ui:357 msgctxt "wizelementspage|bottom" msgid "_Bottom" msgstr "下(_B)" #. NCp3E #: chart2/uiconfig/ui/wizelementspage.ui:367 msgctxt "wizelementspage|extended_tip|bottom" msgid "Positions the legend at the bottom of the chart." msgstr "將圖例置於圖表底端。" #. REBEt #: chart2/uiconfig/ui/wizelementspage.ui:398 msgctxt "wizelementspage|Axe" msgid "Choose Titles, Legend, and Grid Settings" msgstr "選擇題名、圖例、格線設定" #. wp2DC #: chart2/uiconfig/ui/wizelementspage.ui:431 msgctxt "wizelementspage|x" msgid "X axis" msgstr "X 軸" #. KbejV #: chart2/uiconfig/ui/wizelementspage.ui:440 msgctxt "wizelementspage|extended_tip|x" msgid "Displays grid lines that are perpendicular to the x-axis." msgstr "顯示垂直於 X 軸的網格線。" #. KPGMU #: chart2/uiconfig/ui/wizelementspage.ui:451 msgctxt "wizelementspage|y" msgid "Y ax_is" msgstr "Y 軸(_I)" #. Nivye #: chart2/uiconfig/ui/wizelementspage.ui:460 msgctxt "wizelementspage|extended_tip|y" msgid "Displays grid lines that are perpendicular to the y-axis." msgstr "顯示垂直於 Y 軸的網格線。" #. G65v4 #: chart2/uiconfig/ui/wizelementspage.ui:471 msgctxt "wizelementspage|z" msgid "Z axi_s" msgstr "Z 軸(_S)" #. uVwTv #: chart2/uiconfig/ui/wizelementspage.ui:480 msgctxt "wizelementspage|extended_tip|z" msgid "Displays grid lines that are perpendicular to the z-axis. This option is only available for three-dimensional charts." msgstr "顯示垂直於 Z 軸的網格線。只有 3D 圖表可以使用此選項。" #. wNqwZ #: chart2/uiconfig/ui/wizelementspage.ui:497 msgctxt "wizelementspage|label2" msgid "Display Grids" msgstr "顯示格線"